maintainer: Jürg Schweizer

en: danger-level avalanche-activity snow-avalanche avalanche-size avalanche-forcasting

en: Avalanche activity data

media_type: text/csv

en: This data file includes data on the avalanche activity per day aggregated from the avalanche data.

format: CSV

mimetype: text/csv

en: Readme

en: The Readme file contains the description of the two data files.

en: Snow avalanche data

en: This data file includes data on the avalanches mapped in the region of Davos.

en:
These data include all avalanches that were mapped in the region of Davos, Switzerland during the winters 1998-1999 to 2018-2019 (21 years), in total 13,918 avalanches, and the corresponding forecast danger level valid on the day of avalanche occurrence, 3533 days and danger ratings in total.

This avalanche activity data set was analysed and results published by Schweizer et al. (2020). They found that the
number of avalanches per day strongly increased with increasing danger level, but avalanche size was poorly related to avalanche danger level.

The data are provided in two files: the first includes the avalanche data (13,918 records); the second includes the avalanche activity per day (3533 records).
Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Schweizer, J., Mitterer, C., Techel, F., Stoffel, A. and Reuter, B., 2020. On the relation between avalanche occurrence and avalanche danger level. The Cryosphere, 14, 737-750, https://doi.org/10.5194/tc-14-737-2020.

avalanche-activity

display_name: avalanche-activity

avalanche-forcasting

display_name: avalanche-forcasting

avalanche-size

display_name: avalanche-size

danger-level

display_name: danger-level

snow-avalanche

display_name: snow-avalanche

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Snow avalanche data Davos, Switzerland, 1999-2019


maintainer: EnviDat Support

en: forest-gain topography built-up-classification urban-sprawl planning-outcome urban-morphology land-use-and-cover-change forest-persistence urban-compactness nature-conservation spatial-modelling basic-services

state: active

type: dataset

media_type: .shp

en: Master plan Ubatuba (zones)

format: SERVICE

media_type: SHP

en: Ecological-Economic Zoning (EEZ)

format: SHP

media_type: geotiff

en: Increase in Normalized Difference Vegetation Index

format: GeoTIFF

en: Permanent housing density increase

en: Urban persistence: Built-up 2005 = Built-up 2015

en: Population density per pixel (change per year)

en: slope

en: Slope °

en: Human Development Index (HDI) per municipality (change per year)

en: Native forest cover gains from 2005 to 2015

en: Topographic Index Position (TPI)

en: infill

en: New built-up pixels classified as infill

en: Increase in clean water provision service

en: Mean income in Reais (R$) per census sector (change per year)

en: Axial

en: New built-up pixels classified as axial

en:
Basic education in % per census sector (change per
year)

en: Native forest cover persistence from 2005 to 2015

en: isolated

en: New built-up pixels classified as isolated

en: Increase in waste collection service

en: Master plan Ihabela (zones)

en: Variables description

media_type: PDF

en: Table of content. Variables description, source, and other important information

format: PDF

en: Descricao dos dados em portiuguês

en: Portugues description

en: Increase in sanitation service

en:
The present dataset is part of the published scientific paper entitled “The role of spatial planning in land change: An assessment of urban planning and nature conservation efficiency at the southeastern coast of Brazil” (Pierri Daunt, Inostroza and Hersperger, 2021). In this work, we evaluated the conformance of stated spatial planning goals and the outcomes in terms of urban compactness, basic services and housing provision, and nature conservation for different land-use strategies. We evaluate the 2005 Ecological-Economic Zoning (EEZ) and two municipal master plans from 2006 in a coastal region in São Paulo State, Brazil. We used Partial Least Squares Path Modelling (PLS-PM) to explain the relationship between the plan strategies and land-use change ten years after implementation in terms of urban compactness, basic services and housing increase, and nature conservation.

We acquired the data for the explanatory variables from different sources listed on Table 1. Since the model is spatially explicit, all input data were transformed to a 30 m resolution raster. Regarding the evaluated spatial plans, we acquired the zones limits from the São Paulo State Environmental Planning Division (CPLA-SP), Ilhabela and Ubatuba municipality.

1)	Land use and cover data: Urban persistence, Urban axial, Urban infill, Urban Isolates, Forest cover persistence, Forest cover gain, NDVI increase

We acquired two Landsat Collection 1 Higher-Level Surface Reflectance images distributed by the U.S. Geological Survey (USGS), covering the entire study area (paths 76 and 77, row 220, WRS-2 reference system, https://earthexplorer.usgs.gov/). We classified one image acquired by the Landsat 5 Thematic Mapper (TM) sensor on 2005-05-150, and one image from the Landsat 8 Operational Land Imager (OLI) sensor from 2015-08-15. We collected 100 samples for forest cover, 100 samples for built-up cover and 100 samples for other classes. We then classified these three classes of land cover at each image date using the Support Vector Machine (SVM) supervised algorithm (Hsu et al., 2003), using ENVI 5.0 software.

Land-use and land-cover changes from 2005 to 2015 were quantified using map algebra, by mathematically adding them together in pairs (10*LULC2015 + LULC2005). We reclassified the LULC data into forest gain (conversion of any 2005 LULC to forest cover in 2015); forest persistence (2005 forested pixels that remained forested in 2015); new built-up area (conversion of any 2005 LULC to built-up in 2015); and urban maintenance (2005 built-up pixels that remained built-up in 2015).

To describe the spatial configuration of the urban expansion, we classified the new built-up areas into axial, infill and isolated, following Inostroza et al. (2013) (For details, please refer to Supplementary Material I at the original publication).

The NDVI was obtained from the same source used for the LULC data. With the Google Engine platform, we used an annual average for the best pixels (without clouds) for 2005 and 2015, and we calculated the changes between dates. We used increases of > 0.2 NDVI to represent an improvement in forest quality.

2)	Federal Census data organization: Urban Basic Services and Housing indicator, socioeconomic and population:

The data used to infer the values of basic services provision, socioeconomic and population drivers was derived from the Brazilian National Census data (IBGE, 2000 and 2010). Population density, permanent housing unit density, mean income, basic education, and the percentage of houses receiving waste collection, sanitation and water provision services, called basic services in the context of this study, were calculated per 30 m pixel. The Human Development Index is only available at the municipality level. We attributed the HDI for the vector file with the municipality border, and we rasterized (30 m resolution) this file in QGIS. Annual rates of change were then calculated to allow comparability between LULC periods. To infer the BSH, we used only areas with an increase in permanent housing density and basic services provision (See Supplementary Material I at the original publication).

3)	Topographic drivers

To infer the values of the topographic driver, we used the slope data and the Topographic Index Position (TPI) based on the digital elevation model from SRTM (30 m resolution) produced by ALOS (freely available at eorc.jaxa.jp/ALOS/en/about/about_index.htm), and both variables were considered constant from 2005 to 2015 (See Supplementary Material I at the original publication).

basic-services

display_name: basic-services

fr: EnviDat: le portail de données environnementales

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

en: Spatially explicit data to evaluate spatial planning outcomes in a coastal region in São Paulo State, Brazil


maintainer: Alexandre Buttler

en: silvopastoral-systems biogeochemisty climate-change soil transplantation-experiment

en: Dataset

media_type: application/zip

en: Zip archive of all datasets detailed in study.

format: ZIP

mimetype: application/zip

en:
Silvopastoral systems are highly productive and combine long-term wood production with annual provision of forage for livestock. In the Swiss Jura Mountains these systems are a key component of the landscape. As in other cold biomes, climate change can potentially accelerate landscape change within these historically sustainable systems.

In order to anticipate the evolution of subalpine wooded pasture ecosystems under future climate and land-use changes, this project focused on the interplay between soil, vegetation and climate. It was aimed at providing experimental evidence for chief ecosystem processes, with emphasis on the quality of the ecosystem services provided. The main interest was placed on vegetation turf resistance to climate change along an unwooded – sparsely wooded - densely wooded pasture gradient (land-use intensity), where plant productivity, diversity and succession along with rates of carbon cycling and microbial activity provided measures of ecosystem functioning at both plot and landscape level.

Experimental transplantation of monolith soil turfs to lower altitudes allowed to simulate soil warming and reduced annual precipitation. In order to simulate a year-round warmer and drier climate the natural climate variation along an altitudinal gradient was used as a proxy. The aim was to simulate realistic climate change scenarios for the second half of the 21st century predicted by the IPCC report and downscaled for Switzerland providing regionalized interpolated projections integrating therein trends for temperature increase and precipitation decrease. By using permanent meteorological stations within the network of the Federal Office of Meteorology and Climatology (MeteoSwiss), we obtained high resolution regional data on the variation of mean annual temperature (MAT) and mean annual precipitation (MAP) in relation to altitude in the Swiss Jura Mountains. We observed a general increase of +0.5 K in MAT and a decrease of -20 % MAP for each 100 m decrease in altitude along the SE slope of the Swiss Jura Mountains. These relationships served for the selection of the transplantation sites such that in comparison to a control site at 1350 m a.s.l. (Combe des Amburnex, N 46°54’, E 6°23’) a +2 K MAT and -20 % MAP was achieved at 1010 m a.s.l. (Saint-George, N 46°52’, E 6°26’), a +4 K MAT and -40 % MAP at 570 m a.s.l., (Arboretum d’Aubonne, N 46°51’, E 6°37’), and a +5 K MAT and -50 % MAP at 395 m a.s.l. (Les Bois Chamblard, N 46°47’, E 6°41’). The two stations at 1010 m a.s.l. and 570 m a.s.l. corresponded to the IPCC scenario A1B for a moderate increase in greenhouse gas emissions and to scenario A2 for a high increase in greenhouse gas emissions, respectively. The station at 395 m a.s.l. was chosen to represent an extreme scenario with climate variables lying at the positive tail distribution of model predictions under the A2 scenario.

Soil cores were assembled into rectangular PVC boxes of 60  80 cm2 size and of 35 cm height. All mesocosms were dug down to surface level into previously prepared trenches in the ground thus preventing lateral heat exchange with the atmosphere. Since at each site the mesocosms were placed in a common garden with no light interception, mesocosms with turfs from the two wooded pastures were shaded from direct sun light to simulate the natural light conditions in the corresponding habitats. Each mesocosm was equipped with a drainage system and was connected to a water tank thus representing a zero potential lysimeter collecting soil solution and precipitation/snowmelt runoff. ECH2O EC-TM sensor probes coupled to Em50 data-loggers (Decagon Devices, Inc., USA) recorded soil temperature and volumetric water content in each mesocosm at the top-soil (0 to -3 cm) every minute and data were averaged over one hour intervals. Climate parameters at each transplantation site were monitored continuously throughout the experiment by means of automated weather stations (Sensor Scope Sàrl, Switzerland), measuring rain precipitation (non-heated tipping bucket gauges) and air temperature and humidity 2 m above the ground surface at one minute intervals.

A list of above- and belowground variables were measured to assess the resilience of biogeochemical processes, plant productivity, tree regeneration, and carbon sequestration for each respective land-use practice. Furthermore, the experimental data were used to improve on (parameterization) the existing spatially explicit, dynamic model WoodPaM and refine the modelʼs climatic and land-use variables so that different scenarios of climate change and land use change could be simulated. Natural and management induced disturbance patterns were incorporated into the model.
The data have been made available within the project CCES Mounted. The climate stations Sensorscope are still in use within the project CLIMARBRE (Wald und Klimawandel, WSL/BAFU).

#References

1. Puissant, J., Cécillon, L., Mills, R.T.E., Robroek, B.J.M. Gavazov, K., De Danieli, S., Spiegelberger, T., Buttler, A., Brun, J.J. 2015. Seasonal influence of climate manipulation on microbial community structure and function in mountain soils. Soil Biology and Biochemistry 80: 296–305.
2. Mills, R., K. Gavazov, T. Spiegelberger, D. Johnson and A. Buttler 2014. Diminished soil functions occur under simulated climate change in a sup-alpine pasture, but heterotrophic temperature sensitivity indicates microbial resilience. Science of the Total Environment, vol. 473–474(0): 465-472.
3. Gavazov, K., Spiegelberger, T. and Buttler, A. 2014. Transplantation of subalpine wood-pasture turfs along a natural climatic gradient reveals lower resistance of unwooded pastures to climate change compared to wooded ones. Oecologia (174) : 1425-1435.
4. Peringer A., Siehoff S., Chételat J., Spiegelberger T., Buttler A. & Gillet F. 2013. Past and future landscape dynamics in pasture-woodlands of the Swiss Jura Mountains under climate change. Ecology and Society, 18, 3: 11. DOI: 10.5751/ES-05600-180311. [online] URL: http://www.ecologyandsociety.org/vol18/iss3/art11/
5. Gavazov, K. S., A. Peringer, A. Buttler, F. Gillet and T. Spiegelberger. 2013. Dynamics of Forage Production in Pasture-woodlands of the Swiss Jura Mountains under Projected Climate Change Scenarios. Ecology and Society 18 (1): 38. [online] URL: http://www.ecologyandsociety.org/vol18/iss1/art38/

biogeochemisty

display_name: biogeochemisty

climate-change

display_name: climate-change

silvopastoral-systems

display_name: silvopastoral-systems

soil

display_name: soil

transplantation-experiment

display_name: transplantation-experiment

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Biogeochemical data from a transplantation experiment of monolith soil turfs along an altitudinal gradient to simulate climate change scenarios


en: avalanche-forecasting snow-instability danger-level snow avalanche avalanche-danger

en: Field observations of snow instabilities

media_type: CSV

en: Read-me file

en: This read-me file contains the descriptions of the variables.

en:
This data set includes 589 snow profile observations including a rutschblock test, observations of signs of instability and an assessment of the local avalanche danger level, mainly recorded in the region of Davos (eastern Swiss Alps) during the winter seasons 2001-2002 to 2018-2019.

These data were analyzed and results published by Schweizer et al. (2021). They characterized the avalanche danger levels based on signs of instability (whumpfs, shooting cracks, recent avalanches), snow stability class and new snow height.

The data are provided in a csv file (589 records); the variables are described in the corresponding read-me file.

These data are the basis of the following publication: Schweizer, J., Mitterer, C., Reuter, B., and Techel, F.: Avalanche danger level characteristics from field observations of snow instability, Cryosphere, 15, in review, 2021.

 Acknowlegements
Many of the data were recorded by SLF observers and staff members, among those Roland Meister, Stephan Harvey, Lukas Dürr, Marcia Phillips, Christine Pielmeier and Thomas Stucki. Their contribution is gratefully acknowledged.

avalanche

display_name: avalanche

avalanche-danger

display_name: avalanche-danger

avalanche-forecasting

display_name: avalanche-forecasting

snow

display_name: snow

snow-instability

display_name: snow-instability


sensitivity-of-modeled-snow-instability

maintainer: Bettina Richter

title_for_slug: sensitivity-of-modeled-snow-instability

en: snow-instability snow-cover-modeling snowpack numerical-avalanche-forecasting global-sensitivity-analysis

en: Case SL

en: Extracted output data for case SL. Here biases were introduced to meteorological input data during the period of slab formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Manually observed snow profiles

en: Manually observed snow profiles at Weissfluhjoch field site for winter season 2016-2017, including layer depth, hand hardness, grain size and grain shape for each layer.

en: Case ALL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the whole simulation period. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Reference run

en: Reference run for the sensitivity analysis at Weissfluhjoch field site for winter season 2016-2017. Meteorological data from the automatic weather stations are used. No biases were introduced to the input data.

en: Case WL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the period of weak layer formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: We investigated the sensitivity of modeled snow instability to meteorological input data using SNOWPACK. We therefore used input data from the automatic weather station at the Weissfluhjoch field site for the year 2016-2017. We investigated three scenarios and performed 14'000 simulations for each scenario. The dataset contains extracted output data from modeled SNOWPACK simulations, including setup files to reproduce the simulations. For further information read the README file.

global-sensitivity-analysis

display_name: global-sensitivity-analysis

numerical-avalanche-forecasting

display_name: numerical-avalanche-forecasting

snow-cover-modeling

display_name: snow-cover-modeling

snowpack

display_name: snowpack

en: Sensitivity of modeled snow instability


maintainer: Matthias Haeni

en: temperature par relative-humidity swiss-forest-lab meteorology meteo long-term wind-speed precipitation climate-change

en: Field station data (ISF)

en: Data file.

en: Data plot of the forest station (ISB)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

mimetype: application/pdf

en: Forest station data (ISB)

en: Site photo of the forest station (ISB)

media_type: image/jpeg

en: Site photo of the forest station from below (viewing upwards the slope).

mimetype: image/jpeg

en: Data plot of the field station (ISF)

en: Site photo of the field station (ISF)

en: Site photo of the field station from the side.

en: Site aerial photo (Isone)

en: Site aerial photo from both Isone stations. Source: Google. 2016. Site aerial photo from both Isone stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Isone in Switzerland where one station is located within a natural broad-leaved forest stand (ISB) with European beech (_Fagus sylvatica_; 70-100 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, ISF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Isone is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Isone, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Sebastian Schlögl

en: turbulent-sensible-heat-fluxes atmosphere snow atmospheric-turbulence stable-boundary-layer

en: Turbulence data AA00

en: sensor in 1 m height

en: Turbulence data PM07

en: NWW

en: SEE

en: Turbulence data WFJ07

en: upper sensor

en: sensor in 25 m height

en: lower sensor

en: Turbulence data WFJ11

en: sensor in 0.2 m height

en: Turbulence data GR00

en: sensor in 2 m height

en:
We used five different atmospheric turbulence datasets from four test sites, with these sites showing differences in their topographical characteristics. We chose one typical alpine test site with high topographical complexity (Weissfluhjoch, Davos, Switzerland) and three test sites consisting of one glacier site (Plaine Morte, Crans-Montana, Switzerland) and two polar sites (Greenland and Antarctica) representing a quasi-ideal site with homogeneous surface and quasi infinite fetch in all directions.
The turbulent sensible heat flux was calculated using the eddy-covariance method. Note that the sonic temperature fluctuations have been converted into virtual temperature fluctuations.
Three-dimensional wind velocity and air temperature were processed using a linear detrending (Rannik and Vesala, 1999) and a planar fit approach (Massmann and Lee, 2002) to rotate the coordinate system. Air temperature, relative humidity and air pressure from weather stations were used to calculate air properties, which are required for the data processing. The weather stations are located in the immediate vicinity of the turbulence tower and are affected by the same air masses. Turbulence data were averaged to 30-min intervals, whilst changing to a 15-min time interval marginally affects the heat fluxes at the Weissfluhjoch test site (Mott et al., 2011). Note that we define a negative sensible heat flux as being directed towards the snow surface and a positive sensible heat flux as being directed upwards.
The selected datasets and corresponding test sites are briefly introduced below:

Weissfluhjoch 2007 (WFJ07): A vertical set-up of two three-dimensional ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) was used at the traditional field site Weissfluhjoch (2540 m asl.) to measure three-dimensional wind velocity and air temperature at a frequency of 20 Hz. The sensors were mounted 3 m and 5 m above the ground and provided reliable data for 50 days between 11 February 2007 and 24 April 2007. Further information on the field campaign can be found in Stössel et al. (2010) and Mott et al. (2011).

Weissfluhjoch 2011-13 (WFJ11): Three-dimensional wind velocity and air temperature were recorded at 5 m above the ground at a frequency of 10 Hz with a three-dimensional ultrasonic anemometer (CSAT3). The analysis was conducted for data obtained between February and March in the years 2011-13.

Plaine Morte 2007 (PM07): Two three-dimensional ultrasonic anemometers (CSAT3) were installed on a horizontal boom facing opposite directions (west-north-west vs. east-south-east) at 3.75 m above the ground to measure air temperature and three-dimensional wind velocity at 20 Hz. The data were collected at the almost flat field site on the Plaine Morte glacier (2750 m asl.) near Crans-Montana, Switzerland from February to April 2007. High quality meteorological data were additionally recorded and used to force the model. A detailed description about the set-up at the Plaine Morte glacier can be found in Huwald et al. (2009) and Bou-Zeid et al. (2010).

Greenland 2000 (GR00): High-frequency three-dimensional ultrasonic anemometer measurements (CSAT3) were recorded at 50 Hz at the Summit Camp (72.3 °N, 38.8 °W, 3208 m asl.) located on the northern dome of the Greenland ice sheet. Data were collected at 1 m and 2 m above the snow surface during summer in 2000 and 2001. Additionally, meteorological measurements were obtained for the post processing and used to force the model. More information about the field campaign can be found in Cullen et al. (2007, 2014).

Antarctica 2000 (AA00): A set-up of three vertical three-dimensional ultrasonic anemometers (DA-600, Kaijo Denki) were installed at Mizuho Station (70°42' S, 44°20' E, 2230 m asl.) in Eastern Antarctica at 0.2, 1 and 25 m and recorded turbulence data at a frequency of 100 Hz from October to November 2000. Longwave and shortwave radiation, relative humidity, air and snow surface temperature were additionally measured and used to force the model. More information about the field campaign can be found in Nishimura and Nemoto (2005).

atmosphere

display_name: atmosphere

atmospheric-turbulence

display_name: atmospheric-turbulence

stable-boundary-layer

display_name: stable-boundary-layer

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

en: How do stability corrections perform in the stable boundary layer over snow?


en: temperature par relative-humidity swiss-forest-lab meteorology meteo long-term wind-speed precipitation climate-change

en: Field station data (BTF)

en: Data file.

en: Data plot of the field station (BTF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site photo of the field station (BTF)

en: Site photo of the field station from the side.

en: Site photo of the forest station (BTB)

en: Site photo of the forest station from the side.

en: Site aerial photo (Bettlachstock)

en: Site aerial photo from both Bettlachstock stations. Source: Google. 2016. Site aerial photo from both Bettlachstock stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (BTB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Bettlachstock in Switzerland where one station is located within a natural mixed forest stand (BTB) with European beech (_Fagus sylvatica_; 170-190 yrs), European silver fir (_Abies alba_; 190 yrs) and Norway spruce (_Picea abies_; 200 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BTF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Bettlachstock is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Bettlachstock, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Frank Techel

en: snow warning-regions danger-level european-alps avalanche-forecast

en: Forecast avalanche danger level

en: contains the highest forecast danger level (dangerLevelMax) for each day and warning region

en: shape file warning regions Alps

en:
This dataset contains the data used in the publication by Techel et al., 2018 _Spatial consistency and bias in avalanche forecasts - a case study in the European Alps_ (Nat Haz Earth Syst Sci).
For details on the data please refer to this publication.
The dataset contains the following:
- shape files for the warning regions in the Alps
- highest forecast danger level for each warning region and day

avalanche-forecast

display_name: avalanche-forecast

danger-level

display_name: danger-level

european-alps

display_name: european-alps

snow

display_name: snow

warning-regions

display_name: warning-regions

en: Forecast avalanche danger level European Alps 2011 - 2015


maintainer: Henning Löwe

en: microstructure discrete-element-modelling snow-mechanics spherical-model-snow 3d-ct-images unconfined-compression-experiments

en: Data Access

media_type: HTTPS

en: Data Structure (Python Notebook - view online)

media_type: ipynb

media_type: text/plain

format: TXT

mimetype: text/plain

en: Data Structure (Python Notebook)

en:
For the investigation of microstructural and mechanical properties of snow unconfined compression experiments and 3D computed tomography (CT) imaging were performed on sintered rounded grain snow and spherical model snow. The spherical model snow was generated to create geometrically simplified, well-defined microstructures for calibration of numerical models, such as discrete element models (DEM) in which the microstructure is represented by spherical particles.
In the experiments, microstructural variation was created by varying the sintering time (contact size) and the density of the ice sphere samples (number of contacts). The 3D CT images allow for a complete reconstruction of the entire experimental sample (cylindrical sample dimension: diameter = 33.6 mm; height = 14 mm).

discrete-element-modelling

display_name: discrete-element-modelling

microstructure

display_name: microstructure

snow-mechanics

display_name: snow-mechanics

spherical-model-snow

display_name: spherical-model-snow

unconfined-compression-experiments

display_name: unconfined-compression-experiments

en: Unconfined compression experiments and 3D CT images of spherical model snow and RG snow samples


aerosol-data-davos-wolfgang

title_for_slug: aerosol-data-davos-wolfgang

en: aerosol particles raclets drincz inp ice-nucleation

en: OPC-N3 Dataset Davos Wolfgang

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: SMPS Dataset Davos Wolfgang

media_type: application/x-netcdf

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity), in a temporal resolution of 2 minutes, with time in UTC, measured at Davos Wolfgang.

mimetype: application/x-netcdf

en: OPC GT-526S Dataset Davos Wolfgang

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en: DRINCZ Dataset Davos Wolfgang

en: The DRINCZ file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en: APS Dataset Davos Wolfgang

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Davos Wolfgang.

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs) and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3788 , TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and DRINCZ: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l minˉ¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the DRoplet Ice Nuclei Counter Zurich (DRINCZ, ETH Zurich) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

drincz

display_name: drincz

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

particles

display_name: particles

raclets

display_name: raclets

en: Aerosol Data Davos Wolfgang


maintainer: Leo Gallus Bont

en: qgis seilaplan forest geoprocessing accessible-forest openstreetmap

en: Railways vector data (close to the sample forest range)

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en: Preview

media_type: image/png

format: PNG

mimetype: image/png

en: Juypter Notebook for Data Preparation

en: Forest vector data (for sample forest range)

en: Juypter Notebook for Data Preparation (online)

en: Power lines vector data (close to the area of the sample forest range)

en: Digitised sample perimeter

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

forest

display_name: forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019


en: snowmicropen water-front weissfluhjoch snow-stratigraphy snow-temperature ice-layers

en: WFJ_ICE_LAYERS dataset

en: README

en: The WFJ_ICE_LAYERS dataset contains multi-instrument snowpack measurements at high temporal resolution, which enable to monitor the formation of deep ice layers due to preferential water flow, at the Weissfluhjoch research site, Davos, Switzerland. It covers the winter 2016/2017, with a focus on the early melting season. This dataset includes traditional snowpack profiles (weekly resolution, 15/11/2016-29/05/2017), SnowMicroPen penetration resistance profiles (daily resolution, 01/02/2017-19/04/2017), snow temperatures measured at different heights in the snowpack (half-hourly resolution, 01/03/2017-15/04/2017) and the water front height derived from an upward-looking ground penetrating radar (3-hour resolution, 04/03/2017-08/04/2017). The measurements are complemented by initialization files for SNOWPACK model simulations with the ice reservoir parameterization at Weissfluhjoch for the winter 2016/2017.

ice-layers

display_name: ice-layers

snow-stratigraphy

display_name: snow-stratigraphy

snow-temperature

display_name: snow-temperature

snowmicropen

display_name: snowmicropen

water-front

display_name: water-front

weissfluhjoch

display_name: weissfluhjoch

en: WFJ_ICE_LAYERS: Multi-instrument data for monitoring deep ice layer formation in an alpine snowpack


en: number-of-caught-persons avalanche-fatalities avalanche-accidents avalanche-accident-statistics number-of-dead-persons

en: Fatal avalanche accidents in Switzerland since 1995-1996

en:
This data collection contains information concerning all accidents by snow avalanches causing at least one fatality in Switzerland. The data set commences on 01/10/1995. After the completion of a hydrological year, the new data is added.

The following information is provided:

 * avalanche identifier
 * date of the accident
 * accuracy of the date in range of days before and after
 * canton
 * name of the locality
 * start zone of the avalanche
  * coordinates (Swiss coordinate system, approximately in middle of start zone)
  * accuracy of the coordinates in meters
 * elevation (in meteres above sea level, app. in middle of start zone)
 * slope aspect (main orientation of start zone)
 * slope inclination (in degree, steepest point within start zone)
 * number of dead persons
 * number of caught persons
 * number of fully buried persons
 * forecasted avalanche danger level
 * activity/location of the accident party at the time of the incident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

number-of-caught-persons

display_name: number-of-caught-persons

number-of-dead-persons

display_name: number-of-dead-persons


maintainer: Yves Bühler

en: avalanche release snow hazard-mapping ramms hazard-indication-mapping

en: RAMMS simulations NHESS

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

en: Potential Release  Area  NHESS

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

hazard-mapping

display_name: hazard-mapping

ramms

display_name: ramms

release

display_name: release

snow

display_name: snow

en: Automated Avalanche Release Area (PRA) Delineation Davos


en: specific-surface-area microct icecube intercomparison snow

en: Statistics of samples

media_type: XLSX

format: XLS

en: TARTES simulations

en: Jupyter notebook with TARTES simulations.

en: Grain survey of snow particles

en: tbd

en: IceCube and MicroCT data

en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

specific-surface-area

display_name: specific-surface-area

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Marco Moretti

en: zurich honeybees urbanization urban-biodiversity bettergardens gardens urban-ecosystems pollinator-experiment resource-availability wild-bees city4bees beekeeping

media_type: .csv

en:
The data contains the following columns:

  SiteID: numeric, the identity of the garden where the bee was sampled.
  Taxonname: character, species name
  Lecty: numeric discreet, a mesure of specialisation degree. Levels: 1 = monolectic; 2=oliolectic; 3=polilectic
  Pheno.start= numeric discreet, the starting week of the flying activity.
  Pheno.end= numeric discreet, the ending week of the flying activity.
  Pheno.duration=numeric discreet, Pheno.end - Pheno.start
  Daytime.activity = numeric continuous, individual-level measure of the day hour when the bee was sampled
  ITD = numeric continuous, individual-level measure of the InterTegular Distance, a metric of mobility in mm.
  Rel.tongue.length =numeric continuous, individual-level measure of the relative tongue length (Tongue length / ITD), a metric of specilaisation degree, in mm.

en: Metadata for the predictors and response dataset

en: Metadata for the predictor and response dataset

en: Response and predictors used for the SEMs

en:
Mean, standard deviation , minimum and maximum values of six functional traits. The data has the following structure:
- Bee_species: bee scientific name
- mean_trait: mean value
- sd_trait: standard deviation
_min_trait: minimum value
- max_trait: maximum value
- trait: the six traits used. ITD = Intertegular distance (mm); Pheno.duration = duration of the phenology; Pheno.start = start of the phenology; Pheno.end = end of the phenology; Rel.tongue.length= relative tongue length (mm); Daytime.activity = daily activity (h)
DistNichePart: functional dissimilarity in a multidimentional trait space defined by five traits between wild bee individuals of a wild bee species and the honeybee individuals. Values are at the species level.

en:
Cities are socio-ecological systems that filter and select species, thus establishing unique species assemblages and biotic interactions. Urban ecosystems can host richer wild bee communities than highly intensified agricultural areas, specifically in resource-rich urban green spaces such as allotment and family gardens. At the same time, urban beekeeping has boomed in many European cities, raising concerns that the fast addition of a large number of managed bees could deplete the existing floral resources, triggering competition between wild bees and honeybees. The data has been used to investigated the interplay between resource availability and the number of honeybees at local and landscape scales and how this relationship influences wild bee diversity.

This dataset contains the raw and processed data supporting the findings from the paper: "Low resource availability drives feeding niche partitioning between wild bees and honeybees in a European city".

The data contains:
1. Bee trait measurements at the species and individual-level of five functional traits.
2. The values of the feeding niche partitioning (functional dissimilarity to honeybees)
3. The predictors of resource availability and beekeeping intensity at local and landscape scales used in the modelling of the paper for the 23 experimental sites.

beekeeping

display_name: beekeeping

bettergardens

display_name: bettergardens

gardens

display_name: gardens

honeybees

display_name: honeybees

pollinator-experiment

display_name: pollinator-experiment

resource-availability

display_name: resource-availability

urban-biodiversity

display_name: urban-biodiversity

urban-ecosystems

display_name: urban-ecosystems

urbanization

display_name: urbanization

wild-bees

display_name: wild-bees

zurich

display_name: zurich

en: Niche partitioning between wild bees and honeybees


maintainer: Michael Lehning

en: Data Source

media_type: R

en: Hourly Gridded Wind Power Time Series

en: Description

en: Full Data Description

en: Coordinates of Grid Points

en:
This dataset consist of simulated hourly power production from an Enercon E82 Turbine at 100 m hub-height. It describes the hourly power output a 1MW turbine would produce in each 0.01° grid cell for the years 2016 and 2017.

100 m wind speed data was taken from the COSMO-1 model (Consortium for Small-scale Modeling 2017), which has a 0.01° horizontal resolution. The domain covered is the whole of Switzerland, with the exclusion of lakes. As such, the number of 0.01◦ pixels within Switzerland amounts to 48657.
Conversion to power output was done based on the power curve of the Enercon E82 Turbine. As power output is lower at altitude due to lower air density, we corrected for this effect as described in (Kruyt et al. 2017).

Please cite the following paper in connection with the dataset:

Paper Citation:
 > _Bert Kruyt, Jérôme Dujardin, and Michael Lehning: Improvement of wind power assessment in complex terrain: The case of COSMO-1 in the Swiss Alps, Front. Energy Res., [doi:10.3389/fenrg.2018.00102] (https://doi.org/10.3389/fenrg.2018.00102)_

mountain-wind-potential

display_name: mountain-wind-potential

topography

display_name: topography

wind-energy

display_name: wind-energy

en: Dataset on Cosmo-1 based Energy Potential in Swiss Alps


data-analysis-toolkits

title_for_slug: data-analysis-toolkits

en: hypothesis-testing bayesian-inference uncertainty statistics error-propagation data-analysis

en: Toolkit 2: quantifying data distributions using descriptive statistics

en: Toolkit 8: Hodges-Lehmann estimators

en: A quick introduction to Hodges-Lehmann estimators (nonparametric measures of effect size)

en: Toolkit 7: hypothesis testing, significance, and power

en: An overview of basic concepts -- and common pitfalls -- in statistical hypothesis testing, statistical significance, and power analysis

en: Toolkit 1: graphically displaying data distributions

en: Toolkit 9: Experimentwise error rates and statistical fishing expeditions

media_type: .pdf

en: Statistical fishing expeditions, and how to avoid being misled by them

en: Toolkit 3: tools for transforming data

en: The ladder of powers and a few other cool transformations

en: Toolkit 4: confidence intervals

en: Toolkit 11: serial correlation

en: Tools for detecting and correcting for serial correlation in analyses of time series

en: Toolkit 12: weighted averages and their uncertainties

en: There are two different ways to calculate the uncertainty of a weighted average. Software packages often don't tell you which one they are reporting, and the resulting errors can be huge.

en: Toolkit 10: linear regression

en: An overview of the math, logic, and pitfalls of ordinary least-squares linear regression

en: toolkit 6: averaging in nonlinear functions

en: The average of a nonlinear function will not equal the function evaluated at its average inputs (the mean of the function will differ from from the function of the mean). This toolkit shows how to estimate that averaging bias.

en: Toolkit 5: uncertainty analysis and error propagation

en: Gaussian error propagation, monte carlo methods, and first-order, second-moment error propagation

en:
These are condensed notes covering selected key points in data analysis and statistics. They were developed by James Kirchner for the course "Analysis of Environmental Data" at Berkeley in the 1990's and 2000's. They are not intended to be comprehensive, and thus are not a substitute for a good textbook or a good education!

License: These notes are released by James Kirchner under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.

bayesian-inference

display_name: bayesian-inference

data-analysis

display_name: data-analysis

error-propagation

display_name: error-propagation

hypothesis-testing

display_name: hypothesis-testing

statistics

display_name: statistics

uncertainty

display_name: uncertainty

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal


maintainer: Albrecht von Boetticher

en: interfoam murgang natural-hazard shallow-landslide hangmuren dberisintermixing finite-volumes barrier-impact-simulation debris-flow

en: debrisInterMixing for OF-Version 6

en:
This version of debrisInterMixing is based on OpenFOAM Version 4.x and was tested on Ubuntu 18.04.1 LTS.
Please follow the instructions given in ReadMe_debrisInterMixing4.pdf for installation.

en: Installation Instructions for debrisInterMixing-6

en: These are the installation instructions for debrisInterMixing4

en:
Here the updated versions of debrisInterMixing are provided for download. The first OpenFoam-compatible Version 2.3.x are available as supplement to v. Boetticher, A., Turowski, J. M., McArdell,W. B., Rickenmann, D., Hürlimann, M., Scheidl, C., and Kirchner, J. W.: DebrisInterMixing-2.3: A Finite Volume solver for three dimensional debris flow simulations based on two calibration parameters. Part two: model validation with experiments. Geoscientific Model Development, 10, 11: 3963-3978. doi: 10.5194/gmd-10-3963-2017.
DebrisInterMixing is a Volume-of-Fluid based Finite Volume code that accounts for shear-thinning sensitive shares of fine sediment suspension together with pressure-sensitive components of the gravel grains within debris flow mixtures. All model properties can be derived from a material sample except for a grid-sensitive calibration parameter.
For more information, please contact albrecht.vonboetticher@wasserbau.ch.

barrier-impact-simulation

display_name: barrier-impact-simulation

dberisintermixing

display_name: dberisintermixing

debris-flow

display_name: debris-flow

finite-volumes

display_name: finite-volumes

hangmuren

display_name: hangmuren

interfoam

display_name: interfoam

murgang

display_name: murgang

natural-hazard

display_name: natural-hazard

shallow-landslide

display_name: shallow-landslide

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Three-dimensional debris flow simulation tool debrisInterMixing


en: climate anthophila predictive-modelling beta-diversity hymenoptera functional-diversity biodiversity wild-bee protected-areas resource-availability elevation-gradient urbanization switzerland community-indices

media_type: .txt

en:
Lat: latitude community plot
Lon: longitude community plot
Richness: species richness
Shannon: Shannon diversity index
FDis: functional dispersion
TOP: Trait Onion Peeling (functional richness)
TED: Trait Even Distribution (functional evenness)
LCBD_taxo: local community contributions to taxonomic beta diversity
LCBD_fun: local community contributions to functional beta diversity
ITD: community weighted means inter-tegula distance
feeding_specialization: community weighted means feeding specialization
tong_length: community weighted means tongue length
phenostart: community weighted means start of the phenology
phenoduration: community weighted means duration of the phenoloy
cleptoparasite: community weighted means cleptoparasites
belowgound: community weighted means proportion belowground
solitary: community weighted means proportion solitary

en:
Raw data supporting the paper "Countrywide wild bee taxonomic and functional diversity reveal a spatial mismatch between alpha and beta-diversity facets across multiple ecological gradients". It contains taxonomic and functional metrics in 4591 community-plots distributed across Switzerland. The calculated metrics are:
- Alpha taxonomic community metrics: species richness and Shannon diversity
- Alpha functional community metrics: Functional richness (using the Trait Onion Peeling index, TOP), functional eveness (using the Trait Even Distribution index, TED) and the functional dispersion.
- Community weighted means of 8 functional traits
- The local community contributions on the functional and taxonomic beta diversity (LCBD).

anthophila

display_name: anthophila

beta-diversity

display_name: beta-diversity

biodiversity

display_name: biodiversity

climate

display_name: climate

community-indices

display_name: community-indices

elevation-gradient

display_name: elevation-gradient

functional-diversity

display_name: functional-diversity

hymenoptera

display_name: hymenoptera

predictive-modelling

display_name: predictive-modelling

protected-areas

display_name: protected-areas

resource-availability

display_name: resource-availability

switzerland

display_name: switzerland

urbanization

display_name: urbanization

wild-bee

display_name: wild-bee

en: Data on wild bee taxonomic and functional diversity in Switzerland


en: swe snow-depth snow uas remote-sensing

en: HS map Brämabül, 14. April 2015

en:
10 cm resolution
15 cm accuracy

en: .tfw file

media_type: tfw

en: coordinates for the .tif raster

en:
This snow depth map was generated 14 January 2015, close to peak of winter accumulation, applying Unmanned Aerial System digital surface models with a spatial resolution of 10 cm. The covered area is 285'000 m2 at the top of Brämabüel, 2490 m a.s.l. covering all expositions. Coordinate system: CH1903LV03.

A detailed description is given here:

Bühler, Y., Adams, M. S., Bösch, R., and Stoffel, A.: Mapping snow depth in alpine terrain with unmanned aerial systems (UASs): potential and limitations, The Cryosphere, 10, 1075-1088, 10.5194/tc-10-1075-2016, 2016.

Abstract:
Detailed information on the spatial and temporal distribution, and variability of snow depth (HS) is a crucial input for numerous applications in hydrology, climatology, ecology and avalanche research. Nowadays, snow depth distribution is usually estimated by combining point measurements from weather stations or observers in the field with spatial interpolation algorithms. However, even a dense measurement network is not able to capture the large spatial variability of snow depth in alpine terrain.
Remote sensing methods, such as laser scanning or digital photogrammetry, have recently been successfully applied to map snow depth variability at local and regional scales. However, such data acquisition is costly, if manned airplanes are involved. The effectiveness of ground-based measurements on the other hand, is often hindered by occlusions, due to the complex terrain or acute viewing angles. In this paper, we investigate the application of unmanned aerial systems (UAS), in combination with structure-from-motion photogrammetry, to map snow depth distribution. Such systems have the advantage that they are comparatively cost-effective and can be applied very flexibly to cover also otherwise inaccessible terrain. In this study we map snow depth at two different locations: a) a sheltered location at the bottom of the Flüela valley (1900 m a.s.l.) and b) an exposed location (2500 m a.s.l.) on a peak in the ski resort Jakobshorn, both in the vicinity of Davos, Switzerland. At the first test site, we monitor the ablation on three different dates. We validate the photogrammetric snow depth maps using simultaneously acquired manual snow depth measurements. The resulting snow depth values have a root mean square error (RMSE) better than 0.07 to 0.15 m on meadows and rocks and a RMSE better than 0.30 m on sections covered by bushes or tall grass. This new measurement technology opens the door for efficient, flexible, repeatable and cost effective snow depth monitoring for various applications, investigating the worlds cryosphere.

remote-sensing

display_name: remote-sensing

snow

display_name: snow

snow-depth

display_name: snow-depth

swe

display_name: swe

uas

display_name: uas

en: UAS based snow depth maps Brämabüel, Davos, CH


global-cryosphere-watch-data-survey

maintainer: Mathias Bavay

title_for_slug: global-cryosphere-watch-data-survey

en: data-portal data-usage data-exchange automatic-publication gcw

en: Data interoperability survey

media_type: text/csv

en: Third party data usage

en: Two surveys on the topic of data usage where conducted for the Global Cryosphere Watch data portal. The first one focused on the data provider point of view while the second one focused on the data user point of view. 37 data providers (ie institutions) worldwide provided their answers for the first survey (from fall 2017 until summer 2018) while 54 users (contacted through various mailing list such as the Cryolist) answered the questions on their third party data usage (fall 2019 until January 2020).

automatic-publication

display_name: automatic-publication

data-exchange

display_name: data-exchange

data-portal

display_name: data-portal

data-usage

display_name: data-usage

gcw

display_name: gcw

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Global Cryosphere Watch data survey


disdrometer-data-davos-wolfgang

title_for_slug: disdrometer-data-davos-wolfgang

en: davos raclets fall-velocity disdrometer precipitation

en: Disdrometer Data Davos Wolfgang

media_type: application/zip

en:
The zip folder contains one netCDF file per day for Davos Wolfgang from February 8 to March 19 2019 with a temporal resolution of 30 seconds (time in UTC) and includes:

- characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...)
- precipitation rate
- radar reflectivity
- visibility range
- weather codes
- instrument performance

en: The dataset contains information on precipitation amount and type for Davos Wolfgang (LON: 9.853594, LAT: 46.835577) from February 8 to March 19 2019. It includes: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

davos

display_name: davos

disdrometer

display_name: disdrometer

fall-velocity

display_name: fall-velocity

precipitation

display_name: precipitation

raclets

display_name: raclets

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Avalanche Warning Service SLF

en: Avalanche fatalities per year in Switzerland since 1936/1937

media_type: CSV

en:
This dataset contains the statistics on the number of avalanche fatalities per hydrological year in Switzerland. The data set commences with the beginning of the hydrological year 1936/37 on 01/10/1936. After the completion of a hydrological year, the new data is appended to the existing dataset.

The following information is contained (by column and column title):
 - hydrological year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)

The definition for these four categories as described in the guidelines to the avalanche accident database:

**tour**:
activities include back-country ski, snowboard or snow-shoe touring

**offpiste**:
access from ski area, generally from the top of a skilift with short hiking distances

**transportation.corridors** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people travelling or recreating on open or temporarily closed
transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)

**buildings** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people inside or just outside buildings, and workers on high alpine building
sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

en: Number of avalanche fatalities per hydrological year in Switzerland since 1936-1937


en: nonlinear-deconvolution impulse-response-function irf system-identification greens-function de-mixing deconvolution arma-noise transfer-function time-series-analysis irfnnhsr

en: Impulse Response Function script

media_type: r script (flat-ascii text)

en: Benchmark demonstration scripts and results

media_type: zip-compressed folder of R scripts and tab-delimited text files

en: README file for IRFnnhs.R and benchmark demonstration scripts

media_type: flat-ascii text

en:
The R script IRFnnhs.R, which efficiently estimates impulse response functions for environmental systems that are nonlinear, nonstationary, or heterogeneous, based on their input and output time series.

Scripts and results for a series of benchmark tests are also provided, to accompany Kirchner, J.W., Impulse response functions for heterogeneous, nonstationary, and nonlinear systems, estimated by deconvolution and demixing of noisy time series, _Sensors_, 22(9), 3291, https://doi.org/10.3390/s22093291, 2022.

arma-noise

display_name: arma-noise

de-mixing

display_name: de-mixing

deconvolution

display_name: deconvolution

greens-function

display_name: greens-function

impulse-response-function

display_name: impulse-response-function

irf

display_name: irf

irfnnhsr

display_name: irfnnhsr

nonlinear-deconvolution

display_name: nonlinear-deconvolution

system-identification

display_name: system-identification

time-series-analysis

display_name: time-series-analysis

transfer-function

display_name: transfer-function

en: Impulse response functions for nonlinear nonstationary and heterogeneous systems


en: snow numerical-model python pattern-formation vapor-transport

media_type: ZIP

en:
Data and code v1.0 downloaded from the git.

Running the code requires an installation of FEniCS via docker.

en:
This python code uses the Finite Element library FEniCS (via docker) to solve the one dimensional partial differential equations for heat and mass transfer in snow. The results are written in vtk format.

The dataset contains the code and the output data to reproduce the key Figure 5 from the related publication:

_Schürholt, K., Kowalski, J., Löwe, H.; Elements of future snowpack modeling - Part 1: A physical
instability arising from the non-linear coupling of transport and phase changes, The Cryosphere, 2022_

The code and potential updates can be accessed directly through git via:

https://gitlabext.wsl.ch/snow-physics/snowmodel_fenics

numerical-model

display_name: numerical-model

pattern-formation

display_name: pattern-formation

python

display_name: python

snow

display_name: snow

vapor-transport

display_name: vapor-transport

education

en: Education and science

en: A numerical solver for heat and mass transport in snow based on FEniCS


maintainer: Mahdi Jafari

en: snow-density-profile numerical-simulation openfoam convection-in-snow vapor-transport

en: snowpackBuoyantPimpleFoam

en:
This zipped folder includes (1) the source code files, (2) an example case for simulation, and (3) an instruction how to compile and use the new solver.

Note that the most updated version of snowpackBuoyantPimpleFoam can be found in the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/snow-models/snowpackbuoyantpimplefoam

en: snowpackBuoyantPimpleFoam is a two-phase solver implemented to model convection of water vapor with phase change in snowpacks. This new solver is based on the standard solver of buoyantPimpleFoam in the open-source fluid dynamics software, OpenFOAM 5.0 (www.openfoam.org).

convection-in-snow

display_name: convection-in-snow

numerical-simulation

display_name: numerical-simulation

openfoam

display_name: openfoam

snow-density-profile

display_name: snow-density-profile

envidat

en: EnviDat: the Environmental Data Portal

en: snowpackBuoyantPimpleFoam: an OpenFOAM Eulerian–Eulerian two-phase solver for modelling convection of water vapor in snowpacks


en: geodata gridded-data raster time-series sentinel-2 video-encoding core

en: CORE Dataset (80 GB)

media_type: CORE

media_type: .sh

en:
Shell script to extract data from the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en:
Shell script to reproduce the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software for working with CORE will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en:
DISCLAIMER: CORE is still in development. Interested parties are warmly invited to join common development, to comment, discuss, find bugs, etc.

Acknowledgement: The CORE format was proudly inspired by the Cloud Optimized GeoTIFF ([COG](https://www.cogeo.org/)) format, by considering how to leverage the ability of clients issuing HTTP GET range requests for a time-series of remote sensing and aerial imagery (instead of just one image).

License: The Cloud Optimized Raster Encoding (CORE) specifications are released to the public domain under a Creative Commons 4.0 CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

-----------------------

Summary:
The Cloud Optimized Raster Encoding (CORE) format is being developed for the efficient storage and management of gridded data by applying video encoding algorithms. It is mainly designed for the exchange and preservation of large time series data in environmental data repositories, while in the same time enabling more efficient workflows on the cloud. It can be applied to any large number of similar (in pixel size and image dimensions) raster data layers. CORE is not designed to replace COG but to work together with COG for a collection of many layers (e.g. by offering a fast preview of layers when switching between layers of a time series).

WARNING: Currently only applicable to RGB/Byte imagery. The final CORE specifications may probably be very different from what is written herein or CORE may not ever become productive due to a myriad of reasons (see also 'Major issues to be solved').

With this early public sharing of the format we explicitly support the Open Science agenda, which implies "shifting from the standard practices of publishing research results in scientific publications towards sharing and using all available knowledge at an earlier stage in the research process" (quote from: European Commission, Directorate General for Research and Innovation, 2016. Open innovation, open science, open to the world).

CORE Specifications:

1) a MP4 or WebM video digital multimedia container format (or any future video container playable as HTML video in major browsers)

2) a free to use or open video compression codec such as H.264, VP9, or AV1 (or any future video codec that is open sourced or free to use for end users)

Note: H.264 is currently recommended because of the wide usage with support in all major browsers, fast encoding due to acceleration in hardware (which is currently not the case for AV1 or VP9) and the fact that MPEG LA has allowed the free use for streaming video that is free to the end users. However, please note that H.264 is restricted by patents and its use in proprietary or commercial software requires the payment of royalties to [MPEG LA](https://www.mpegla.com/programs/avc-h-264/). However, when AV1 matures and accelerated hardware encoding becomes available, AV1 is expected to offer 30% to 50% smaller file size in comparison with H.264, while retaining the [same quality](https://trac.ffmpeg.org/wiki/Encode/AV1).

3) the encoding frame rate should be of one frame per second (fps) with each layer segmented in internal tiles, similar to COG, ordered by the main use case when accessing the data: either layer contiguous or tile contiguous;

Note: The internal tile arrangement should support an easy navigation inside the CORE video format, depending on the use case.

4) a CORE file is optimised for streaming with the moov atom at the beginning of the file (e.g. with -movflags faststart) and optional additional optimisations depending on the codec used (e.g. -tune fastdecode -tune zerolatency for H.264)

5) metadata tags inside the moov atom for describing and using geographic image data (that are preferably compatible with the [OGC GeoTIFF standard](https://www.ogc.org/standards/geotiff) or any future standard accepted by the geospatial community) as well as list of original file names corresponding to each CORE layer

6) it needs to encode similar source rasters (such as time series of rasters with the same extent and resolution, or different tiles of the same product; each input raster should be having the same image and pixel size)

7) it provides a mechanism for addressing and requesting overviews (lower resolution data) for a fast display in web browser depending on the map scale (currently external overviews)

Major issues to be solved:

- Internal overviews (similar to COG), by chaining lower resolution videos in the same MP4 container for fast access to overviews first); Currently, overviews are kept as separate files, as external overviews.

- Metadata encoding (how to best encode spatial extent, layer names, and so on, for each of the layer inside the series, which may have a different geographical extent, etc...; Known issues: adding too many tags with FFmpeg which are not part of the standard MP4 moov atom; metadata tags have a limited string length.

- Applicability beyond RGB/Byte datasets; defining a standard way of converting cell values from Int16/UInt16/UInt32/Int32/Float32/Float64/ data types into multi-band Byte values (and reconstructing them back to the original data type within acceptable thresholds)

Example

Notice: The provided CORE (.mp4) examples contain modified Copernicus Sentinel data [2018-2021].

For generating the CORE examples provided, 50 original Sentinel 2 (S-2) TCI data images from an area located inside Switzerland were downloaded from www.copernicus.eu, and then transformed into CORE format using ffmpeg with H.264 encoding using the [x264 library](https://www.videolan.org/developers/x264.html).

For full reproducibility, we provide the original data set and results, as well scripts for data encoding and extraction (see resources).

core

display_name: core

geodata

display_name: geodata

gridded-data

display_name: gridded-data

raster

display_name: raster

time-series

display_name: time-series

video-encoding

display_name: video-encoding

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Francesco Comola

en: sediment sand saltation snow cohesion wind

en: Output of the model simulations

en: Model results on granular splash and saltation process of sand and snow particles

en:
The wind-driven saltation of sand and snow shapes dunes and ripples, generates dust emission, and erodes the surface of the Antarctic ice sheet. Here, we use a model based on the discrete element method to simulate grain-flow interactions and study the effect of particle cohesion on saltation dynamics.

The data contains the model output of granular splash simulations and saltation simulations. Granular splash, the main particle entrainment process in saltation, occurs upon impact of saltating particles with the granular bed. We performed Monte Carlo simulations of granular splash for loose sand grains and for cohesive ice grains. The analysis indicate that different values of cohesion have significant effects not on the number of splashed grains, on the ejection velocity, and the rebound velocity.

In our saltation simulations, we trigger particle movement with a single splash event at the inlet section section and let the system evolve until steady state. Our results show that saltation over cohesive surfaces is difficult to initiate but easy to sustain at low wind speed. The occurrence of transport thus depends on the history of the wind speed, a phenomenon known as hysteresis. We also show that saltation over cohesive surfaces presents higher mass fluxes but requires longer distances to saturate, which increases the size of the smallest stable surface ripples. Our model results have implications for large-scale aeolian processes on Earth and Titan, where sand grains are thought to be very cohesive.

cohesion

display_name: cohesion

saltation

display_name: saltation

sand

display_name: sand

sediment

display_name: sediment

wind

display_name: wind

en: Saltation of cohesive granular materials


en: avalanche-forecast snow-stability-evaluation avalanche snowpack snow

en: Manually observed snow profiles

en: Manually observed snow profiles as csv-files containing depth [cm], thickness [cm], density [kg m-3], hand hardness, first grain type, second grain type, first grain size [mm], and second grain size [mm] of each layer.

en: SNOWPACK simulations

en: This dataset contains all SNOWPACK simulations, including input files, setup and output files.

en: Stability tests

en: Stability tests including csv-files with CT, ECT and PST experiments for each year and each field site.

en: README

media_type: text/plain

en: README file explaining data structure and content

en: Extracted data

en: Extracted data contain validation and results published in Richter et al. (2019).

en:
To validate the critical crack length as implemented in the snow cover model SNOWPACK, PST experiments were conducted for three winter seasons (2015-2017) at two field site above Davos, Switzerland. This dataset contains manually observed snow profiles and stability tests. Furthermore, corresponding SNOWPACK simulations are included.
These data were analyzed and results were published in Richter et al. (2019).

Please refer to the Readme file for further details on the data.

These data are the basis of the following publication:
Richter, B., Schweizer, J., Rotach, M. W., and van Herwijnen, A.: Validating modeled critical crack length for crack propagation in the snow cover model SNOWPACK, The Cryosphere, 13, 3353–3366, https://doi.org/10.5194/tc-13-3353-2019, 2019.

avalanche

display_name: avalanche

avalanche-forecast

display_name: avalanche-forecast

snow

display_name: snow

snow-stability-evaluation

display_name: snow-stability-evaluation

snowpack

display_name: snowpack

education

en: Education and science

en: Validating and improving the critical crack length in SNOWPACK


maintainer: Ueli Reber

en: bgb text-corpus biodiversity policy-analysis environmental--policy policy-documents switzerland

en: Replication files

en:
 Introduction

The ZIP file contains all data and code to replicate the analyses reported in the following paper.

Reber, U., Fischer, M., Ingold, K., Kienast, F., Hersperger, A. M., Grütter, R., & Benz, R. (2022). Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics. *Policy Sciences*. [https://doi.org/10.1007/s11077-022-09456-4](https://doi.org/10.1007/s11077-022-09456-4)

If you use any of the material included in this repository, please refer to the paper. If you use (parts of) the text corpus, please also refer to the sources used for its compilation listed below. The content of the texts may not be changed.

 Data folder

The data folder contains the following files.

* _corpus.parquet_: Text corpus of Swiss policy documents
* _dict_de.csv_: Biodiversity dictionary (German)
* _dict_fr.csv_: Biodiversity dictionary (French)
* _dict_it.csv_: Biodiversity dictionary (Italian)
* _topic_labels.csv_: labels/codes for policy sectors
* _topics.csv_: labels/codes for policy sectors

The corpus and the dictionary were compiled by the authors specifically for this project. The labels/codes for policy sectors are based on the [coding scheme](http://ws-old.parlament.ch/affairs/topics) of the Swiss Parliament.

 Text corpus

The text corpus consists of 439,984 Swiss policy documents in German, French, and Italian from 1999 to 2018. The corpus was compiled from the following source between 2020-10-01 and 2021-01-31.

* Transcripts and parliamentary businesses (e.g. questions, motions, parliamentary initiatives) via the [Web Services (WS)](https://www.parlament.ch/de/%C3%BCber-das-parlament/fakten-und-zahlen/open-data-web-services) provided by the Swiss Parliament
* The official compilation of federal legislation ("Amtliche Sammlung", AS) via [opendata.swiss](https://opendata.swiss/de/dataset/official-compilation-of-federal-legislation-bs-as-1947-2018) provided by the Swiss Federal Archives (SFA)
* The federal gazette ("Bundesblatt") via [fedlex.admin.ch](https://www.fedlex.admin.ch/de/fga/index)
* Decisions of federal courts via [entscheidsuche.ch (ES)](https://entscheidsuche.ch/)

The corpus is stored in a single data frame to use with R saved as [PARQUET](https://parquet.apache.org/) file (corpus.parquet). The data frame has the following structure.

* _text_id_: Unique identifier for each text (source information as prefix, e.g. "t_")
* _doc_type_: Document type (see coding scheme below)
* _branch_: Government branche (1 legislative, 2 executive, 3 judicative)
* _stage_: Stage of policy process (1 drafting, 2 introduction, 3 interpretation)
* _year_: Year of publication
* _topic_: Policy sector (coding scheme in separate file in data folder)
* _lang_: Language (de, fr, it)
* _text_: Text

The following list contains the coding scheme for the doc_type variable.

* 101: Federal gazette // Draft for public consultation ("Vernehmlassungsverfahren")
* 102: Federal gazette // Explanation of draft for parliament ("Botschaft")
* 103: Federal gazette // Strategy, action plan
* 104: Federal gazette // Federal council decree ("Bundesratsbeschluss")
* 105: Federal gazette // (Simple) Federal decree ("(Einfacher) Bundesbeschluss")
* 106: Federal gazette // General decree ("Allgemeinverfügung")
* 107: Federal gazette // Treaty ("Übereinkommen")
* 108: Federal gazette // Treaty ("Abkommen")
* 109: Federal gazette // Draft for parliament ("Entwurf")
* 110: Federal gazette // Report ("Bericht")
* 111: Federal gazette // Report of parliamentary comission ("Bericht")
* 112: Federal gazette // Report of federal council ("Bericht")
* 201: Parl. businesses // Submitted text
* 202: Parl. businesses // Reason text
* 203: Parl. businesses // Federal council response
* 204: Parl. businesses // Initial situation
* 205: Parl. businesses // Proceedings
* 301: Parl. transcripts // Speech of MP
* 302: Parl. transcripts // Speech of federal council
* 401: Federal legislation // Legal text of the official compilation (law, ordinances, etc.)
* 501: Court decisions // Federal Supreme Court
* 502: Court decisions // Federal Criminal Court
* 503: Court decisions // Federal Administrative Court

 Code folder

The code folder contains all R code for the analyses. The files are numbered chronologically.

* _1_classifier_training.R_: Training of classifiers for classification of policy sectors
* _2_classifier_application.R_: Classification of documents in corpus
* _3_dictionary_application.R_: Biodiversity indexing of documents in corpus
* _4_stm_truncation.R_: Truncation of indexed documents to keep only relevant parts
* _5_stm_translation.R_: Translation of FR and IT documents to DE
* _6_stm_model.R_: Preprocesssing and structural topic model
* _7_plots.R_: Plots and numbers as included in the paper

The code/functions folder contains custom functions used in the scripts, e.g. to support topic model interpretation.

Package versions and setup details are noted in the code files.

 Contact

Please direct any questions to Ueli Reber (ueli.reber@eawag.ch).

bgb

display_name: bgb

biodiversity

display_name: biodiversity

environmental--policy

display_name: environmental--policy

policy-analysis

display_name: policy-analysis

policy-documents

display_name: policy-documents

switzerland

display_name: switzerland

text-corpus

display_name: text-corpus

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Replication files for "Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics"


en: climate-change precipitation wind-speed long-term meteo meteorology swiss-forest-lab relative-humidity par temperature

en: Site photo of the forest station (VSB)

media_type: image/jpeg

en: Site photo of the forest station from below (viewing upwards the slope).

en: Site photo of the field station (VSF)

en: Site photo of the field station from the side.

en: Field station data (VSF)

en: Data file.

en: Data plot of the forest station (VSB)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Visp)

en: Site aerial photo from both Visp stations. Source: Google. 2016. Site aerial photo from both Visp stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the field station (VSF)

en: Forest station data (VSB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Visp in Switzerland where one station is located within a natural mixed forest stand (VSB) with Scots pine (_Pinus sylvestris_; 40-80 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, VSF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Visp is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Visp, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards