vegetation-height-model-nfi

maintainer: Christian Ginzler

title_for_slug: vegetation-height-model-nfi

en: point-cloud forest vegetation-height-model photogrammety 3d

en: 2015 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2015' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2010 to 2015.

en: Thumbnail

en: 2012 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2012' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2007 to 2012.

en: 2019 Vegetation Height Model NFI (current)

en:
Data 'Vegetation Height Model NFI 2019' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2013 to 2019.

en: Countrywide Stereo-Image Matching for Updating Digital Surface Models in the Framework of the Swiss National Forest Inventory

en: 2016 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2016' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2011 to 2016.

en:
A national vegetation height model was calculated for Switzerland using digital aerial images.
We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution
(1 × 1 m and 0.5 x 0.5 m). The DSM was then normalized to obtain the actual
vegetation heights using a digital terrain model (DTM)
based on laser data with the buildings masked out, and to
produce a vegetation height model (VHM). Such a model
will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very
high level of detail. For covering the whole of Switzerland,
we use summer aerial images from six years.

Latest version is from 2019.

forest

display_name: forest

photogrammety

display_name: photogrammety

point-cloud

display_name: point-cloud

vegetation-height-model

display_name: vegetation-height-model

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Vegetation Height Model NFI


maintainer: Loïc Pellissier Pellissier

en: elevation herbivores-communities environmental-gradients functional-traits community-indices plant-herbivore-interactions alps

state: active

type: dataset

en: Vegetion surveys

media_type: text/plain

en: Species inventories of plants

format: TXT

mimetype: text/plain

en: Orthoptera traits

en: Orthoptera functional traits (incisive mandibular strength averaged by species)

en: Orthoptera surveys

en: Species inventories of Orthoptera

en: Nematode surveys

en: Surveys of soil nematode along elevation

en: Plant traits

en: Plant functional traits (SLA, LDMC, carbon and nitrogen content, punch strenght; averaged by species)

en: Study sites

en: Coordinates and elevation of the study sites

en: Despite the common role of above- and below-ground herbivore communities in mediating ecosystem functioning, our understanding of the variation of species communities along natural gradient is largely strongly biased toward aboveground organisms. This dataset enables to study the variations in assemblages of two dominant groups of herbivores, namely, aboveground orthoptera and belowground nematodes together with their food plants. Herbivores and plant surveys were conducted in 48 natural grasslands along six elevation gradients, selected to span the major macro-climatic and environmental conditions of the Swiss Alps. It compiles herbivores and plant surveys, information on the study sites as well as plant and herbivores functional traits sought to be involved in trophic interactions and to respond to climatic variation along the elevation. Plant functional traits considered are the SLA, the LDMC, the C/N content, the punch strength (i.e. force required to pierce the leave lamina), the mandibular strength for Orthoptera insect. Data were collected during the summer 2016 and 2017.

alps

display_name: alps

community-indices

display_name: community-indices

elevation

display_name: elevation

environmental-gradients

display_name: environmental-gradients

functional-traits

display_name: functional-traits

herbivores-communities

display_name: herbivores-communities

plant-herbivore-interactions

display_name: plant-herbivore-interactions

education

fr: Education, science

de: Bildung, Wissenschaft

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Above- and below-ground herbivore communities along elevation


maintainer: Mountain Hydrology and Mass Movements

en: rockfall-fatalities lightning-fatalities debris-flow-fatalities flood-fatalities earthquake-fatalities landslide-fatalities natural-hazard-fatalities ice-avalanche-fatalities windstorm-fatalities

media_type: CSV

en: Natural hazard fatalities per year in Swizterland since 1946.

format: CSV

mimetype: text/csv

en:
This dataset contains the number of fatalities due to flood, debris flow, landslide, rockfall, windstorm, lightning, ice avalanche, earthquake and other processes like roof avalanche or lacustrine tsunami for each year since 1946.
The following information is contained (by column and column title):

* year
* total number of hazard fatalities
* number of fatalities by flood (German: Hochwasser, Überschwemmung). Flood includes people drowned in flooded or inundated areas or carried away in streams under high-water conditions.
* number of fatalities by debris flow (German: Murgang).
* number of fatalities by landslide (German: Erdrutsch). Landslide includes people killed by landslides and hillslope debris flows (German: Hangmure).
* number of fatalities by rockfall (German: Steinschlag, Fels- und Bergsturz).
* number of fatalities by windstorm (German: Sturm). Windstorm includes people killed by falling objects or trees during very strong wind conditions and people who drowned in lakes because their boat capsized during such conditions.
* number of fatalities by lightning (German: Blitz).
* number of fatalities by ice avalanche (German: Eislawine).
* number of fatalities by earthquake (German: Erdbeben).
* number of fatalities by other processes like roof avalanche, lacustrine tsunami (German: andere Prozesse wie Dachlawine, Tsunami im See).

The data was collected based on newspaper research. For more information please refer to

_Badoux, A., Andres, N., Techel, F., and Hegg, C.: Natural hazard fatalities in Switzerland from 1946 to 2015, Nat. Hazards Earth Syst. Sci., 16, 2747-2768, https://doi.org/10.5194/nhess-16-2747-2016, 2016._

The data collection is financed by the FOEN (with exception of the collection of the avalanche fatalities). The data contains the official statistics of the FOEN on fatalities due to flood, debris flow, landslide, rock fall and avalanche.

Restrictions: The data set is not complete. Only fatalities in or around settlements and on open transportation routes are included. More precisely, fatalities were not collected, when persons exposed themselves to a great danger on purpose. Or fatalities during leisure activities which are connected to a higher risk were not included (this includes e.g. canoeing or river surfing during flood, canyoning, mountaineering, climbing, walking or driving on a closed road).

Fatalities by avalanches are collected at the WSL Institute for Snow and Avalanche Research SLF. You can download the avalanche fatalities per hydrological year [here](https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936) and per calendar year [here](https://www.envidat.ch/dataset/avalanche-fatalities-per-calendar-year-since-1936). For a direct comparison with the fatalities presented here, please download the data set with the calendar years and do not consider fatalities in the backcountry (tour) or in terrain close to ski areas (offpiste).

debris-flow-fatalities

display_name: debris-flow-fatalities

earthquake-fatalities

display_name: earthquake-fatalities

flood-fatalities

display_name: flood-fatalities

ice-avalanche-fatalities

display_name: ice-avalanche-fatalities

landslide-fatalities

display_name: landslide-fatalities

lightning-fatalities

display_name: lightning-fatalities

natural-hazard-fatalities

display_name: natural-hazard-fatalities

rockfall-fatalities

display_name: rockfall-fatalities

windstorm-fatalities

display_name: windstorm-fatalities

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Number of natural hazard fatalities per year in Switzerland since 1946


en: depth-of-snowfall gridded-data terrestiral-laserscanning antarctica terrestrial-laser-scans

en: Scan from 27 December 2018, 1 mm resolution

media_type: ascii x, y, z

format: SERVICE

en: Scan from 27 December 2018, 10 cm resolution

en: Scan from 21 December 2018, 1 mm resolution

en: Scan from 11 January 2019, 1 mm resolution

en: Scan from 4 January 2019, 1 mm resolution

en: Scan from 4 January 2019, 10 cm resolution

en: Scan from 2 January 2019, 10 cm resolution

en: Scan from 21 December 2018, 10 cm resolution

en: Scan from 11 January 2019, 10 cm resolution

en: Scan from 2 January 2019, 1 mm resolution

en:
Surface topography maps (spatial extent: 400 m x 400 m) obtained at approximately 300 m from the top of the Hammarryggen Ice Rise in Dronning Maud Land, East Antarctica, using a Riegl VZ-6000 Terrestrial Laser Scanner (TLS). Scans were obtained on 5 days in the 2018-2019 Austral summer: on December 21 and 27, and January 2, 4 and 11. By using reflectors installed on bamboo poles, scans were registered with respect to the reflectors, such that the difference between two successive scans reveals the spatial patterns of erosion and deposition of snow. On each scan day, we used multiple scan positions to create one combined point cloud. After applying an octree filter on the point cloud, a 3D surface was obtained. For each day, the dataset contains a 1 mm and a 10 cm octree filter resolution file, only including points in a 400 m x 400 m area centered around the scan positions.

Notes:

* All files in the dataset are in the same coordinate system. However, this coordinate system is arbitrary (i.e., not related to any global coordinate system).

* From the installed reflectors, 4 reflectors could be used over the full period. The scan accuracy is generally higher within the area enclosed by the reflectors.

* The scans from January 2 were found to have exhibited small tilt during the scan and are of lesser accuracy.

* By walking along fixed corridors, disturbance of the snow was limited.

antarctica

display_name: antarctica

depth-of-snowfall

display_name: depth-of-snowfall

gridded-data

display_name: gridded-data

terrestiral-laserscanning

display_name: terrestiral-laserscanning

terrestrial-laser-scans

display_name: terrestrial-laser-scans

en: Terrestrial laser scans on Hammarryggen Ice Rise, Dronning Maud Land, East Antarctica


maintainer: EnviDat Support

en: development-priorities urban-region europe spatial-information strategic-plans

en: Planning intentios

en:
The present dataset is part of the report titled Gradinaru S.R., Hersperger A.M., Schmid F. (2021). Deriving Planning Intentions from written planning documents. Report on CONCUR Project- From plans to land change: how strategic spatial planning contributes to the development of urban regions.
The data corresponds to the data collected as part of the DPI Method for deriving all PIs contained in a plan (open coding) as detailed in section 4 of the report. The method involved reading the plans to break down of information in meaningful discrete “incidents” or planning intentions. To identify the planning intentions, the starting points were represented by a) the structuring of the plans in chapters and sub chapters and b) the themes that the plans addressed. Thus, the collected information was not grouped according to pre-defined categories of planning intentions, but rather put together as a list of intentions as revealed by each plan. As a result, we provide, for each case study, a document (named [Urban region name] PI as defined in the plan) which contains:
	Date when the information was filled in.
	Name of the urban region and analysed strategic spatial plan .
	A list of all planning intentions contained in a plan, with each PI being addresses as follows:
	Name of PI as it appears in the plan
	Translated name of the PI (i.e. short name for easy understanding of the meaning)
	Explanation regarding the meaning of the PI
	Why the PI is considered a priority for the urban region
	Spatial information on the PI (text and cartographic representations).
In total, 14 documents are available, one for each case study. Documents contain up to 20 pages of information extracted from the plans together with explanations and notes taken during plan reading.

development-priorities

display_name: development-priorities

europe

display_name: europe

spatial-information

display_name: spatial-information

strategic-plans

display_name: strategic-plans

urban-region

display_name: urban-region

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Planning intentions in strategic plans of European urban regions


maintainer: Giulia Francesca Azzurra Donati

en: integrated-modelling urban-spatial-planning ecological-corridors circuit-theory human-dominated-landscapes biodiversity

en: Amphibian whole life cycle predictors - 10m resolution

media_type: zip-compressed folder of ascii files

en:
Amphibian whole life cycle predictors include 6 variable types:
(1)	Topographic – slope [°]: derived from the Swiss Topographical Landscape model (swissTLM 3D 2015) at 2 m resolution (elevation uncertainty ± 0.5m) and, subsequently, aggregated to a median value;
(2)	Hydrologic: two predictors including nearest distance to water [m] (all water-related objects and rasterized lotic, lentic and reedbeds from the regional cadastral maps – AV: Daten der Amtliche Vermessung) and runoff coefficient [C] (between 0 and 1 relating amount of runoff to amount of precipitation, mapped AV: Daten der Amtliche Vermessung data against literature values for different land covers);
(3)	Edaphic – soil moisture variability (not available): can gathered from the spatial modelling of Ecological Indicator Values in Switzerland (Descombes et al., 2020) and resampled from 100m to 10m;
(4)	Vegetation: we calculated the median and standard deviation of the Normalized Difference Vegetation Index (NDVI) from all available cloud free Sentinel-2 pixels available between April and October for the years 2016 to 2019 (Drusch et al., 2012) and the median vegetation height [m] (not available) can gathered from Ginzler and Hobi (2015);
(5)	Land-use derived: includes three predictors, grassland density [grassland/cell] (not available) - can be gathered from Pazur et al. (2021), total grasslands area evaluated using a spatial weight matrix and a 250m neighborhood radius around each cell; urbanization [buildings/cell] – average building density for a 250m neighborhood around each cell based on the AV: Daten der Amtliche Vermessung ; and traffic intensity [vehicles/day] – average daily vehicle count (Nationales Personenverkehrsmodells);
(6)	Movement-ecology related: includes three predictors of proximity – nearest forest distance [m]; nearest rock-gravel and sandy area (RGS) distance [m] and nearest road distance [m] (considering any road type) – all calculated based on the AV: Daten der Amtliche Vermessung maps.

en: Amphibian species specific landscape resistance maps.

en: For each amphibian species we used the weighted average Ensemble model suitability map and converted it to a resistance map using an exponential decay function following (Duflot et al., 2018) using the species-specific mpa threshold previously computed (Preau et al., 2020). The function assigns a resistance value of 1,000 when habitat suitability equals zero, and a value of one when habitat suitability is greater than or equal to the binarization threshold. The exponential shape strengthens the barrier effect of less favorable areas.

en: Amphibian monitoring data

media_type: .csv

en: Processed amphibian occurrence data (2017-2019) in the cantons of Aargau and Zürich. The dataset includes information for the following species: _Alytes obstetricans_,_Bombina variegata_, _Bufo bufo_, _Hyla arborea_, _Ichtyosaura alpestris_, _Lissotriton helveticus_, _Lissotriton vulgaris_, _Rana temporaria_, _Salamandra salamandra_, and _Triturus cristatus_.

en: Binarized "green" and "grey" landcover data (Cantons of Aargau and Zürich)

en: "Green" landcover refers to lawns and vegetated urban surfaces such as, for example private gardens, public parks, cemeteries, green stripes along roadsides, etc. While "grey" landcover refers to impervious grounds such as roads, troittoirs, other impervious. Binarized maps, 30x30m resolution.

en: Amphibian breeding sites of national importance - cantons of Aargau and Zürich

media_type: .asc

en: Amphibian breeding sites of national importance (focal nodes) in the cantons of Aargau and Zürich, 30x30 m resolution, binarised ascii format.

en: The data includes (1) amphibian occurrence data (2017-2019) for ten species across the cantons of Aargau and Zürich gathered from the Coordination Center for the Protection of Amphibians and Reptiles of Switzerland (http://www.karch.ch), (2) amphibian whole-life cycle environmental predictors (i.e. topographic, hydrologic, edaphic, vegetation, land-use derived, movement-ecology related), and (3) local urban "green" and "grey" landcover data which can be used to identify opportunities for Blue-Green Infrastructure (through green or grey transitions) in support of regional landscape connectivity.

biodiversity

display_name: biodiversity

circuit-theory

display_name: circuit-theory

ecological-corridors

display_name: ecological-corridors

human-dominated-landscapes

display_name: human-dominated-landscapes

integrated-modelling

display_name: integrated-modelling

urban-spatial-planning

display_name: urban-spatial-planning

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Amphibian and urban-rural landscape data Swiss Lowlands


envidat-supports-open-science

maintainer: Ionut Iosifescu Enescu

title_for_slug: envidat-supports-open-science

en: juypter-notebooks research-data-management open-science wsl envidat

en: Article as PDF

media_type: application/pdf

format: PDF

mimetype: application/pdf

en:
The article "EnviDat Supports Open Science" originally appeared in WSLintern No. 3 (2020), page 14-15 and it is republished here with permission from the WSLintern editorial team. It contains guidelines for WSL scientists about the main issues behind Open Science and how to pragmatically approach the complexities of doing Open Science with EnviDat’s support.

License: This article is released by WSL and the EnviDat team to the public domain under a Creative Commons 4.0 CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

envidat

display_name: envidat

juypter-notebooks

display_name: juypter-notebooks

open-science

display_name: open-science

research-data-management

display_name: research-data-management

wsl

display_name: wsl

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat Supports Open Science


automatic-classification-of-avalanches

maintainer: Alec van Herwijnen

title_for_slug: automatic-classification-of-avalanches

en: avalanche machine-learning localization seismic monitoring

media_type: application/x-tar

en:
This tar file contains classification results for two seismic geophone arrays deployed above Davos, Switzerland. The of the first array located at the Dischma Valley was used to automatically identify all seismic events produced by avalanches, whereas the classification perfomed at the second array located at the Wannengrat field site was used to identify airplanes and earthquakes.
Furthermore, this tar file also contains the median back-azimuth of all classified events at the Dischma field site.

mimetype: application/x-tar

en: This dataset contains the classification and localization results obtained during the automatic classification of avalanches during the winter season 2017.

avalanche

display_name: avalanche

localization

display_name: localization

machine-learning

display_name: machine-learning

monitoring

display_name: monitoring

seismic

display_name: seismic

en: Automatic Classification of Avalanches


maintainer: Jana von Freyberg

en: stable-water-isotope alptal stream-water hydrology catchment precipitation

media_type: .txt

en:
Version 2 of the dataset contains additional information on:
- line-conditioned (lc) excess
- precipitation sample volumes
- isotope data quality

en: Data Set Documentation: alptal_Isotopes_daily_2015-2019_v2

media_type: .pdf

en: Documentations contains meta data of the data columns and information about the study catchments.

media_type: PDF

media_type: TXT

en: Single comma-separated txt-file with daily data of stable water isotopes measured in streamwater and precipitation in the Swiss Alptal catchment and two of its tributaries (Erlenbach and Vogelbach), as well as daily data of key hydrometeorological variables from the Alptal valley

en: This dataset contains four years of daily measurements of the natural isotopic composition (2H, 18O) of precipitation and stream water at the Alp catchment (area 47 km2) in Central Switzerland and two of its tributaries (0.73 km2 and 1.55 km2). In addition, the dataset contains daily measurements of key hydrometeorological variables.

alptal

display_name: alptal

catchment

display_name: catchment

hydrology

display_name: hydrology

precipitation

display_name: precipitation

stable-water-isotope

display_name: stable-water-isotope

stream-water

display_name: stream-water

en: Four years of daily stable water isotope data in stream water and precipitation from three Swiss catchments


en: ecology historical-carthography environmental---history wetlands switzerland environmental--policy

en: Wetlands 1850 - 2010 (shapefiles)

media_type: application/zip

en:
 History of wetlands - GIS-Layers
 Location of wetlands based on signatures in topographic maps
* Basis 1850: original measuring table sheets Dufour created between the years 1834 and 1863.
* Basis 1900/ Basis 1950: The Siegfried maps were updated and published at regular intervals between 1870 and 1949. This long period of time made it possible to reconstruct wetlands for two periods based on the Siegfried Maps: the first edition (hereinafter referred to as "1900") and the last edition ("1950").
* Basis 2010: Map sheets from the National Map from 2006 to 2011 were used for the most recent time period of the reconstruction.
 Location of wetlands due to reconstructions
The reconstruction **must not** be interpreted in the sense of a surface-accurate separation, but shows without claim to location accuracy the approximate extent of the areas that would have corresponded to the mapping criteria for wetlands used in today's topographic maps around 1850, 1900 and 1950. The basics can be found in Stuber & Bürgi 2019, chapter 5.4.

format: ZIP

mimetype: application/zip

en:
Naturally, large parts of the Swiss Plateau are characterised by wetlands
and meandering rivers. That this is no longer the case today is the result
of centuries of efforts to obtain dry land. But how did this process take
place? What were the relevant actors and what were their motivations? And
what can be said about the ecological consequences of this development?

In a research project on the history of wetlands in Switzerland since 1700,
we conducted (a) a historical analysis of the development of land use in
wetlands and the actors involved, (b) a historical-cartographic
reconstruction of wetland extent since 1850 and (c) an evaluation of
ecological effects of changes in wetlands on various organisms groups.

The series of GIS layers on wetland history stem from the second part of
the project. The area reconstruction is based on digitized and homogenized
signatures from national map series, as they have been available since
about 1850. Details about the digitalization process and the homogenization
procedures applied ("Rekonstruktionen") are included in Stuber & Bürgi
2019.

Book Citation:
 > Stuber M, Bürgi M (2019) Vom «eroberten Land» zum Renaturierungsprojekt. Geschichte der Feuchtgebiete in der Schweiz seit 1700. "Bristol Schriftenreihe", Band 59. Haupt Verlag, Bern, Stuttgart, Wien. 262 Seiten.

ecology

display_name: ecology

environmental---history

display_name: environmental---history

environmental--policy

display_name: environmental--policy

historical-carthography

display_name: historical-carthography

switzerland

display_name: switzerland

wetlands

display_name: wetlands

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: History of wetlands in Switzerland since 1850


ceilometer-klosters

title_for_slug: ceilometer-klosters

en: ceilometer klosters vertical-visibility raclets cloud-base-height

en: Ceilometer data Klosters

media_type: mat

en: Ceilometer installed at Klosters measuring cloud base height, cloud cover and backscatter profile. The time resolution is 30 seconds, with time given in number of days from January 0, 0000, UTC. More information on the variables in the manufacturer manual.

en: Cloud base height (m) and vertical visibility (m) were measured with the VAISALA Ceilometer CL31 in Klosters (LON: 9.880413, LAT: 46.869019). The CL31 is an instrument with constant reliability for all weather conditions and simultaneous detection of three cloud layers in heights up to 7.6 km.

ceilometer

display_name: ceilometer

cloud-base-height

display_name: cloud-base-height

klosters

display_name: klosters

raclets

display_name: raclets

vertical-visibility

display_name: vertical-visibility

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Ceilometer Klosters


maintainer: Michael Lehning

en: alpine3d snow alpine3d-simulations snow-cover snow-distribution alpine-precipitation snow-hydrology

en: ADS datasets and simulation inputs

en: The file contains the ADS datasets of snow depth and input data used for simulations.

en:
Dataset (Model input, snow distribution and validation) for the precipitation scaling paper, which should be cited along with the data set citation.

This data is useful for distributed hydrological modelling or other tasks that involve the study of snow distribution and precipitation in the high Alpine.

The format of the data is for Alpine3D (models.slf.ch) model runs but other models could be used, too.

Please cite:

_Vögeli, C., Lehning, M., Wever, N., Bavay M., 2016: Scaling Precipitation Input to Spatially Distributed Hydrological Models by Measured Snow Distribution., Front. Earth Sci. 4: 108. doi: 10.3389/feart.2016.00108._

Dataset is provided as a single zip file.
The archive contains two directories, the valuable distributed snow depth maps for the landscape Davos and the simulation input.
The archive also contains the file: "ReadMeMetadataDataSetPrecipitationScaling" which explains the data structure.

alpine-precipitation

display_name: alpine-precipitation

snow

display_name: snow

snow-cover

display_name: snow-cover

snow-distribution

display_name: snow-distribution

snow-hydrology

display_name: snow-hydrology

en: Precipitation Scaling Data Set (Vögeli et al., Frontiers)


maintainer: Matthias Haeni

en: precipitation climate-change long-term temperature meteorology meteo par relative-humidity wind-speed swiss-forest-lab

en: Site photo of the forest station (CLB)

media_type: image/jpeg

en: Site photo of the forest station from below (viewing upwards the slope).

mimetype: image/jpeg

en: Data plot of the field station (CLF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the forest station (CLB)

en: Site photo of the field station (CLF)

en: Site phote of the field station from the side.

media_type: text/csv

en: Data file.

en: Site aerial photo (Celerina)

en: Site aerial photo from both Celerina stations. Source: Google. 2016. Site aerial photo from both Celerina stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Celerina in Switzerland where one station is located within a natural coniferous forest stand (CLB) with Swiss pine (_Pinus cembra_; 210-250 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, CLF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Celerina is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Celerina, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: geoinformationssystem open-source seilaplan digitales-hohenmodell swisstopo digitale-planung seilruckung qgis-plugin schweizer-geodaten

en:
Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Als Alternative zum Swiss Geo Downloader erklären wir in diesem Tutorial Schritt für Schritt, wie man das nötige Höhenmodell von der Swisstopo Webseite herunterladen und in QGIS zur Seillinienplanung verwenden kann.

Link zum Höhenmodell auf der swisstopo Webseite: https://www.swisstopo.admin.ch/de/geodata/height/alti3d.html#technische_details

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

digitale-planung

display_name: digitale-planung

digitales-hohenmodell

display_name: digitales-hohenmodell

geoinformationssystem

display_name: geoinformationssystem

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

schweizer-geodaten

display_name: schweizer-geodaten

seilaplan

display_name: seilaplan

seilruckung

display_name: seilruckung

swisstopo

display_name: swisstopo

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Seilaplan-Tutorial: Herunterladen des DHM von swisstopo Website


weather-station-davos-wolfgang

maintainer: Jörg Wieder

title_for_slug: weather-station-davos-wolfgang

en: temperature weather raclets relative-humidity pressure

en: Weather Station Davos Wolfgang

en: The data file contains date and time (YYYY-MM-DD hh:mm:ss) in UTC, temperature (°C), relative humidity (%), pressure (hPa) at 10 m above ground and above sea level. The data was averaged over 10 minutes.

en: The dataset contains weather parameters measured at Davos Wolfgang (LON: 9.853594, LAT: 46.835577).

pressure

display_name: pressure

raclets

display_name: raclets

weather

display_name: weather


maintainer: Elisabeth Hafner

en: hazard-mapping avalanche snow satellite natural-hazard

en: SPOT6 Avalanche Outlines 16 January 2019

media_type: SHP

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset and within the limitations of the dataset described in the publications.

format: SHP

en:
Outlines of 6'041 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 16 January 2019. The dataset was acquired following a period with very high avalanche danger. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping16012019.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

The data was comprehensivly validated in a subset area in

Hafner, E.D.; Techel, F.; Leinss, S.; Bühler, Y., 2021: Mapping avalanches with satellites - evaluation of performance and completeness. Cryosphere, 15, 2: 983-1004. doi: 10.5194/tc-15-983-2021

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow

en: SPOT6 Avalanche outlines 16 January 2019


en: biological-control switzerland drosophila-suzukii simple-sequence-repeats trichopria-drosophilae nuclear-microsatellite-markers multilocus-genotypes population-genetics

en: Table comprising all pertinent information for multiplex PCRs of species-specific nuclear microsatellite makers for Trichopria drosophilae, comprising all 21 newly developed markers, details on full sequences with GenBank accession numbers, primer sequences (including labeling and pig-tails), and repeat motives. PCRs with respective annealing temperatures (AnnealingTemp) refer to Type-It Multiplex PCR Kit (Qiagen, Hilden, Germany).

en: Multilocus genotypes (biallelic coding for 21 nuclear microsatellites) of Trichopria drosophilae described in Gugerli et al. Agrarforschung Schweiz 2019. Missing data denoted as '999'. Population codes (PopNo) are the following: 1, Vezia; 3, Contone ; 5, Davesco; 6, Corteglia; 7, Mezzana; 8, Stabio; 9, Gordola; 10, Sementina; 12, Brusata di Novazzano; 14, Monteggio; 16, Giubiasco; 17, ComoBP; 18, VD; 19, Weil_D; 20, Dossenheim; 21, BioPlanet_Como. Coordinates (CoordCH_E, CoordCH_N) refer to the Swiss coordinates system CH1903.

en:
 Nuclear microsatellite markers and genotype data for _Trichopria ddrosophilae_

This data set comprises (i) the characteristics of a set of 21 species-specific nuclear microsatellites for PCR amplification in _Trichopria drosophilae_ (ii) and genotype data for samples collected in southern Switzerland (Canton of Ticino), with few reference samples from Canton of Vaud, southern Germany, and northern Italy (lab-reared population).
Markers were developed by Ecogenics GmbH, Balgach (Switzerland), using MiSeq Nano 2x250 v2 format (on a mix of 10 individuals). Multiplex PCR assays for multilocus genotyping were established by Ecological Genetics (WSL Birmensdorf), and population genetic analyses are found in Gugerli et al., Agrarforschung Schweiz 2019.

biological-control

display_name: biological-control

drosophila-suzukii

display_name: drosophila-suzukii

multilocus-genotypes

display_name: multilocus-genotypes

nuclear-microsatellite-markers

display_name: nuclear-microsatellite-markers

population-genetics

display_name: population-genetics

simple-sequence-repeats

display_name: simple-sequence-repeats

switzerland

display_name: switzerland

trichopria-drosophilae

display_name: trichopria-drosophilae

en: Nuclear microsatellite markers for Trichopria drosophilae, parasitoid wasp on Drosophila suzukii


en: decision-making ecosystem-protection integral-water-management gis hydropower

en: Indicators

media_type: text/markdown

en: The indicators capture supporting ecosystem functions.

en:
 A spatial dataset and tool to simultaneously assess hydropower potential and ecological potential of the Swiss river network (Version 2016)

 Introduction
The steadily growing demand for energy and the simultaneous pursuit of decarbonisation are increasing interest in the expansion of renewable energies worldwide. In Switzerland, various funding projects have been launched to promote technologies in the field of renewable energies and their application as quickly as possible. With the introduction of a funding instrument in 2009, the number of projects submitted to produce renewable energies increased rapidly. The applications for small hydropower plants (≤ 10 MW) were correspondingly numerous. However, the assessment of the environmental impact and its comparison with hydropower importance is still not standardized.
To provide a basis for decision-making, a methodology was developed to determine the overall hydropower potential of a region. A detailed assessment of each river reach, and the systematic and holistic assessment of small hydropower projects at a regional scale are combined here. The assessment of a river reach is conducted at the river space (i.e., the river and adjacent areas) and at the surrounding landscape level. The HYDROpot_integral methodology was developed as part of Carol Hemund's dissertation (2012) at the University of Bern. It allows the evaluation of river reaches holistically, regarding ecological, social, economic and cultural criteria. As a second part of the overall project, the theoretical hydropower (or hydraulic) potential was calculated for the entire river network, which complemnets the spatial assessment. In particular, it is possible to classify river reaches into those that are more suitable for hydropower production (=”use”) and those that are more suitable for protection.

 Material and method
The HYDROpot_Integral method was developed and tested on the basis of cantonal and national data (Hirschi et al. 2013). The method relies on 73 geodata sets. This holistic assessment is the key element of the entire assessment procedure. Its aim is to quantify the importance of the ecosystem functions in terms of services. The river network (GWN07) is divided into reaches of about 450m and for each reach two study units are defined. The river space (RS) records the ecosystem functions of the water body and the nearby riparian area. The length of the RS is 315 m on average in Switzerland and a maximum of 450 m, whereas the width is based on the FOEN definition (BWG 2001: 18f) and varies between 7-107 m. The surrounding landscape (SLS) is the second survey unit that records the ecosystem functions of the surrounding area over a range of 21 m to 321 m. The SLS is calculated over three times the RS width. The length of the SLS is identical to the length of the RS. The ecosystem functions are divided into three types: regulating (service A), cultural (service B) and provisioning (service C) functions. Accordingly, the assessment of the functions is divided into three parts and three values are assigned to each river reach. The more functions there are and the greater their performance, the higher these values are and the more important the corresponding functions are. Hence, these values quantify the importance of the ecosystem functions and the ecological, cultural and economic ecosystem services of each river reach. The concatenation of ecosystem services results in a value (ABC) that can occur in 125 different versions due to the chosen five-level value scale; i.e. each digit of the three-digit number sequence can be assigned a value between 1 and 5. Each of the 125 combinations, and thus each river reach, has its own characteristics determined by the assessments of the three function types. To record the suitability, the combinations are ranked according to their ecological, cultural and economic ecosystem services. These rules mean that the combination that is most suitable for hydropower production at minimum cost in terms of ecological and cultural ecosystem services and has a high economic potential is ranked first; rank 125 indicates the highest ecological and cultural ecosystem services and the lowest economic services and is therefore most suitable for protection. A river reach that is excluded from hydropower use due to legislation, a so-called priority reach, is given rank 126 from the outset and specially marked. A more detailed description of the methods can be found in Hirschi et al. 2013 [Link]. The dataset presented here presents the latest state of the HYDROpot_integral methodology applied at the national level. Only national data that is easily accessible was used in the preparation of the dataset. The cantonal data, such as renaturation and revitalization, would have to be requested by each canton individually and was excluded here. The nationwide value synthesis was made with R.
A list of data sources can be found here [link to text file]
A list of all parameters can be downloaded here [link to PDF and text files]

 Dataset description
Data is presented as a single shapefile. It contains the river network and all assessment results obtained with HYDROpot_Integral.

 Changes in the methodology compared to the original method (Hirschi et. al 2013)

 * RS_A11 Ecomorphology: recorded for the whole of Switzerland and zero values equated with NA;
individual cantons such as Zug and St. Gallen have no mapped values according to the modular
concept of the federal government, Valais and Graubünden only the main valleys, Ticino and Fribourg not
completely (BAFU 2009).
 * RS_A14 Renaturation and revitalization data: not centrally available at the time of data collection.
centrally available, therefore values in GR were equated with NA.
 * RS_A15 Dilution ratio at wastewater treatment plants (WWTPs) for discharges: Zero values
equal to NA.
 * RS_A20 Water flow: use WASTA (2013) with hydroelectric power plants (> 300 kW) under
Federal control and dams serving hydroelectricity (Dam, as of 2013).
 * RS_C05 Synoptic hazard maps: are cantonally managed at the time of data collection,
Values in GR are marked with a 5 so that the systematics in the decision tree is not affected.
is affected.
 * Water quality (RS_A15, RS_A16, RS_A17, RS_A18, RS_A19): for the evaluation of the function type.
A Nature, it is important whether the median of the five values is less than or equal to 3 in total. This
evaluation is based on the decision tree for evaluating GR (Hirschi et al. 2013:22).
Therefore, an evaluation of the station data is made where critical and possible river segments
with poor quality (median less than 3) exist. Only two longer and one short
sections in Switzerland receive a lower median than 3 for water quality.
 * SLS_B06 Visibility: For 99 percent of the river segments (30,733 of 31,062) in the canton of
Bern (2015 reduced version), the landscape area is considered to be visible. Due to this high number
of sections, a large number of viewpoints in the layer of Swisstopo and
the computation time and computability in ArcGIS, the landscape area is classified as generally viewable
(equal to 1).
16 Method
Additional indicators were added (see Appendix B.2):
 * SLS_A21 Dissection
 * SLS_A22 Forest areas
 * SLS_B03 Hiking trails
 * SLS_B10 Residential and vacation homes
 * SLS_B11 Tourist infrastructure
 * SLS_C01 Landfill
 * SLS_C03 Infrastructure
 * SLS_C05 Industry
 * SLS_C06 Agricultural land
Not to be added, although present to some extent:
 * SLS_B06 Cultural assets of national importance: here, too, the calculability of the visibility analysis is
for the whole of Switzerland is limited
 * SLS_A15 Legally binding protection and land use planning: the individual river sections are not
clearly designated, i.e. no geodata exist
The following data are also not supplemented, as they are cantonal data:
 * SLS_A10 Cantonal nature reserves
 * SLS_A16 Forest reserves
 * SLS_A17 Cantonal inventories and contractually protected areas

decision-making

display_name: decision-making

ecosystem-protection

display_name: ecosystem-protection

gis

display_name: gis

hydropower

display_name: hydropower

integral-water-management

display_name: integral-water-management

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal


en: uncertainty rain-on-snow natural-climate-variability climate-change-impact cryosphere snow-water-equivalent

en: climate realizations

en: The dataset contains for three variables (snow water equivalent, surface water input and liquid precipitation) 50 realizations of current and future climate periods for two time horizons (mid end end of century), two emission senarions (RCP 4.5 and 8.5) and 10 climate model chains (all EUR11 chains within CH2018). To quantify natural climate variability for projections of snow conditions and resulting rain-on-snow (ROS) flood events, a weather generator was applied to simulate inherently consistent climate variables for multiple realizations of current and future climates at 100 m spatial and hourly temporal resolution over a 12 x 12 km high-altitude study area in the Swiss Alps. The output of the weather generator was used as input for subsequent simulations with an energy balance snow model. The data was extracted in 2021 from original model output.

climate-change-impact

display_name: climate-change-impact

cryosphere

display_name: cryosphere

natural-climate-variability

display_name: natural-climate-variability

rain-on-snow

display_name: rain-on-snow

snow-water-equivalent

display_name: snow-water-equivalent

uncertainty

display_name: uncertainty

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Multiple realizations of daily snow water equivalent, surface water input and liquid precipitation projections for mid- and late-century


en: erosion sediment-transport model mars snow

media_type: text/plain

en: Datasets of Figure 2

en: Datasets of Figure 3b

en: Datasets of Figure 3a

en: Datasets of Figure 4b

en: Datasets of Figure 4a

en:
The files contain the datasets used to produce Figures 2, 3, and 4 of the manuscript ([doi: 10.1002/2016GL071822](http://dx.doi.org/10.1002/2016GL071822)).

 Manuscript Abstract:
Despite being the main sediment entrainment mechanism in aeolian transport, granular splash is still poorly understood. We provide a deeper insight into the dynamics of sand and snow ejection with a stochastic model derived from the energy and momentum conservation laws. Our analysis highlights that the ejection regime of uniform sand is inherently different from that of heterogeneous sand. Moreover, we show that cohesive snow presents a mixed ejection regime, statistically controlled either by energy or momentum conservation depending on the impact velocity. The proposed formulation can provide a solid base for granular splash simulations in saltation models, leading to more reliable assessments of aeolian transport on Earth and Mars.

erosion

display_name: erosion

mars

display_name: mars

model

display_name: model

sediment-transport

display_name: sediment-transport

snow

display_name: snow

en: Energy- and momentum-conserving model of splash entrainment in sand and snow saltation


lwf-tea-bag-sites

maintainer: Marcus Schaub

title_for_slug: lwf-tea-bag-sites

en: roiboos modeling green-tea decomposition verification litter tea-bag carbon forest

en: Site Information

en: Descriptive information on sites

en:
Decomposition of plant litter is a key process for the transfer of carbon and nutrients in ecosystems. Carbon contained in the decaying biomass is released to the atmosphere as respired CO2, and may contribute to global warming. Litterbag studies have been used to improve our knowledge of the drivers of litter decomposition, but they lack comparability because litter quality is plant species-specific. The use of commercial tea bags as a standard substrate was suggested in order to harmonize studies, where green tea and rooibos represent more labile and more recalcitrant C compounds as surrogates of local litter.
The tea bag approach was implemented on eight sites of the Swiss long-term Forest Ecosystem Research (LWF) network (https://www.wsl.ch/LWF). This allowed us to take advantage from the existing infrastructure and data from a previous litterbag study with local litter. In Beatenberg and Schaenis, additional elevation transects were established (1200-1800 m and 540-1150 m, respectively) to examine particularly the effect of temperature on decomposition. In Pfynwald (https://www.wsl.ch/de/ueber-die-wsl/versuchsanlagen-und-labors/flaechen-im-wald/pfynwald.html) and Salgesch, infrastructure of running projects was used to examine the effect of drought and understory removal, respectively. In Novaggio, tea bags were incubated in summer and winter to study the effect of seasonality particularly precipitation. Tea bags are collected after 3, 12, 24, and 36 months; for the two time-shifted experiments additionally after 6 and 9 months.
The study has two primary objectives. Firstly, it contributes to TeaComposition initiative (http://teacomposition.org/) which aims at investigating long-term litter decomposition and its key drivers at present as well as under different future climate scenarios using a common protocol and standard litter (tea) across nine terrestrial biomes. Secondly, the data are used to further develop decomposition models such as Yasso (http://en.ilmatieteenlaitos.fi/yasso) which is used by several countries, including Switzerland to estimate the annual carbon fluxes in dead wood, litter, and soil for reporting in National Greenhouse Gas Inventories under the United Nations Framework Convention on Climate Change and the Kyoto Protocol.

carbon

display_name: carbon

decomposition

display_name: decomposition

forest

display_name: forest

green-tea

display_name: green-tea

litter

display_name: litter

modeling

display_name: modeling

roiboos

display_name: roiboos

tea-bag

display_name: tea-bag

verification

display_name: verification

en: LWF-Tea bag sites


en: precipitation climate-change wind-speed meteo long-term meteorology relative-humidity swiss-forest-lab par temperature

en: Data plot of the forest station (OTB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Othmarsingen)

en: Site aerial photo from both Othmarsingen stations. Source: Google. 2016. Site aerial photo from both Othmarsingen stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Site photo of the field station (OTF)

en: Site photo of the field station from below (viewing upwards the slope).

en: Data plot of the field station (OTF)

en: Site photo of the forest station (OTB)

en: Site photo of the forest station from above (viewing downwards the slope).

en: Field station data (OTF)

en: Data file.

en: Forest station data (OTB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Othmarsingen in Switzerland where one station is located within a natural deciduous forest stand (OTB) with European beech (_Fagus sylvatica_; 120-140 yrs) and lime trees (_Tilia sp._; 120-140 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, OTF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Othmarsingen is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Othmarsingen, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


maintainer: Axel Volkwein

en: field-tests mass-movements experiments rockfall field-data experiment rockfall-experiments natural-hazard field-test impact-testing

en: Video analysis

en: The zip contains five Excel-files that in turn contain the results of the performed video analyses. The sheet "Daten" contains the pixels of different positions on the blocks that were tracked by the software "Kinovea". The sheet "Auswertung" determines the block kinetics based on the pixel data over time.

en: Raw data (high speed videos, acceleration measurements, laboratory tests)

en:
This file contains

* the high speed videos showing the concrete blocks impacting the gallery roof.
* the raw data of the acceleration measurements
* the data of Tiefbauamt Graubünden containg the tension tests of gallery reinforcment, ME-testing the cushion layer and the tests on concrete samples.

en: Acceleration measurements

en: The zip file contains five excel files, one for each test conducted. The first sheet contains the raw data and a data set that went through a low-pass filter. The sheet "Allgemein" contains calibration factors for the sensors and time details of a test. The sheets "DiaDaten" and "DiaDatenGefiltert" show the measurements over time. The block and slab kinetics are determined in the sheets "ZeitintegrationBlock" and "ZeitintegrationPlatte". The sheet "VergleichBeschleunigungen" shows the influence of the low-pass-filter and a running average filter on the block accelerations.

en: Five full-scale field tests were conducted with concrete blocks weighting between 800 and 3200 kg being dropped onto the roof of a gallery structure made from reinforced concrete. The impacts were recorded using high-speed video and acceleration measurements at the falling blocks. The dataset contains the raw data as well as the analyses of the block trajectories, i.e. kinetics and dynamics. Setup of the measurements and the analyses conducted are published in Volkwein, A. "Durchführung und Auswertung von Steinschlagversuchen auf eine Stahlbetongalerie", WSL-Berichte, Heft 68, 2018.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

impact-testing

display_name: impact-testing

mass-movements

display_name: mass-movements

natural-hazard

display_name: natural-hazard

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Rockfall gallery testing Parde 2016


en: photovoltaic shortwave-radiation albedo snow winter-energy-production

en: Data Forward Scattering

media_type: .zip

en: GROUNDEYE model for multiple forward scattering in snow-covered terrain. Meteorological and topographical input data set for the Meierhofertäli near Davos, Switzerland, September 2017 - August 2018. Output data for September 2017 - August 2018 at hourly resolution and every pixel. Post-processing scripts for plotting and analysis.

en:
 Overview
We present GROUNDEYE, a new model of radiative transfer over mountainous terrain, which considers for the first time the forward scattering properties of snow.
Embedded in the surface process model Alpine3D, the new terrain radiation model GROUNDEYE receives interpolated real weather data with diffuse and direct broadband shortwave radiation for each pixel as well as a spatially variable plane albedo from the module SNOWPACK.

 Format
The GROUNDEYE model is written in c++, as is the entire environment of Alpine3d. The input and output data sets are .xlsx or .txt format, pre- and postprocessing including the generation of all figures is in .R format.

 Structure
In Data_Forward_Scattering.zip you will find all necessary data and model details to
reproduce the results of the JGR publication "How forward-scattering snow and terrain change the Alpine radiation balance with application to solar panels"

 - 	Model Input Data contains the meteorological and topographic input data sets, the BRDF, and preprocessing scripts.
 - Model Code contains the full model Alpine3d including the radiative transfer module GROUNDEYE.
 - Model Output Data contains the results of the simulation of terrain irradiance and irradiance of solar panels; hourly resolution, 1. Sptember 2017 - 31. August 2018.
 - Measurements Solar Testsite contains information and measurements of the solar testsite at the Totalp near Davos, Switzerland.
 - Postprocessing contains all R-Scripts used for the analysis and
plotting of the corresponding data.

In each of these folders you will find detailed information in
the file 'About this Folder.txt'.

albedo

display_name: albedo

photovoltaic

display_name: photovoltaic

shortwave-radiation

display_name: shortwave-radiation

snow

display_name: snow

winter-energy-production

display_name: winter-energy-production

en: Data, Code Link and Metadata on Forward Scattering of Snow at Totalp


maintainer: Peter Bebi

en: soil-temperature carbon-dioxide climate-change experiment vegetation

en: FACE experimental design

media_type: PNG

format: PNG

en: Project description

en: FACE DATASETS

en:
 Overview
High elevation ecosystems are important in research about environmental change because shifts in climate associated with anthropogenic greenhouse gas emissions are predicted to be more pronounced in these areas than in most other regions of the world. This project involves a Free Air CO2 Enrichment (FACE) and soil warming experiment located in a natural treeline environment near Davos, Switzerland (Stillberg, 2200 m a.s.l.). Elevated atmospheric CO2 concentrations (+200 ppm) were applied from 2001 to 2009, and a soil warming treatment (+4 K) was added in 2007 (ongoing). The combined CO2 enrichment and warming treatment reflects conditions expected to occur in this region in approximately 2050. A broad range of ecological and biogeochemical research is carried out as part of this environmental change project.

#Experimental setup
The experiment consists of 40 hexagonal 1.1 m2 plots, 20 with a Pinus mugo ssp. uncinata (mountain pine, evergreen) individual in the centre and 20 with a Larix decidua (European larch, deciduous) individual in the centre. A dense cover of understorey vegetation surrounds the tree in each plot, including the dominant dwarf shrub species Vaccinium myrtillus (bilberry), Vaccinium gaultherioides (group V. uliginosum agg., northern bilberry) and Empetrum nigrum ssp. hermaphroditum (crowberry) plus several herbaceous and non-vascular species.

At the beginning of the experimental period, the 40 plots were assigned to 10 groups of four neighbouring plots (two larch and two pine trees per group) in order to facilitate the logistics of CO2 distribution and regulation. Half of these groups were randomly assigned to an elevated CO2 treatment while the remaining groups served as controls and received no additional CO2. In spring 2007, one plot of each tree species identity was randomly selected from each of the 10 CO2 treatment groups and assigned a soil warming treatment, yielding a balanced design with a replication of five individual plots for each combination of CO2 level, warming treatment and tree species.

#Data
Soil and air conditions have been monitored closely throughout the study period, with most measurements made during the combined CO2 x warming experiment (2007-2009).

carbon-dioxide

display_name: carbon-dioxide

climate-change

display_name: climate-change

soil-temperature

display_name: soil-temperature

vegetation

display_name: vegetation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: FACE: Stillberg CO2 enrichment and soil warming study


maintainer: Frank Hagedorn

en: fertilization zero-tension-lysimeters beech phosphorus soil-temperature forest-topsoil seasons nitrogen dissolved-organic-phosphorus nutrient-fluxes

media_type: XLSX

format: XLS

en:
Data on dissolved organic and inorganic phosphorus and nitrogen concentrations in leachates and their corresponding
fluxes from the litter layer, the Oe/Oa horizon, and the A horizon of two German beech forest sites.
Leachate samples were taken in April 2018, July 2018, October 2018, Feb./Mar. 2019, and July 2019
with zero-tension lysimeters after artificial irrigation. Soil samples were taken in July 2019.
For more details please refer to the publication.

beech

display_name: beech

dissolved-organic-phosphorus

display_name: dissolved-organic-phosphorus

fertilization

display_name: fertilization

forest-topsoil

display_name: forest-topsoil

nitrogen

display_name: nitrogen

nutrient-fluxes

display_name: nutrient-fluxes

phosphorus

display_name: phosphorus

seasons

display_name: seasons

zero-tension-lysimeters

display_name: zero-tension-lysimeters

en: Phosphorus and nitrogen leaching from beech forest soils


intratrait

maintainer: Christian Rixen

title_for_slug: intratrait

en: climate-change elevation-range plant-traits neighbour-interactions elevation-gradient cold-adapted-plants

media_type: CSV

en: Plant trait data along elevation gradients on mountains

media_type: R

en:
This data set was used to test whether species specialized to high elevations or with narrow elevational ranges show more conservative (i.e. less variable) trait responses across their elevational distribution, or in response to neighbours, than species from lower elevations or with wider elevational ranges. We did so by studying intraspecific trait variation of 66 species along 40 elevational gradients in four countries (Switzerland, Australia, New Zealand, China) in both hemispheres. As an indication of potential neighbour interactions that could drive trait variation, we also analysed plant species’ height ratio, its height relative to its nearest neighbour.
The following traits and parameters were measured and are available in this data set:
As an indication of plant stature, we measured vegetative and generative height, where vegetative height was distance from soil to highest vegetative leaf and generative height was distance to the highest point on the reproductive shoot. As a measure of reproductive investment, we noted the presence of flowers on the randomly chosen individuals (see below). As a measure of individual and genet basal area, we measured individual plant and patch diameters, in two dimensions (along the largest diameter and perpendicular to it). In clonal plant species, plant diameter was equivalent to an individual rosette, whereas patch diameter referred to the whole genet and could represent the size of a tuft, tussock or cushion. For genera with more singular growth forms (e.g., some Gentiana species) plant and patch diameter were the same. The two diameter measurements were made at right angles, allowing estimates of patch and plant areas to be calculated as an ellipse (i.e., area = 0.5 a 0.5 b Π). All traits were measured on ten randomly selected individuals per site. Flower count data was considered in a binary fashion on a per individual basis (because for some species individuals only produce one flower when flowering) so that the presence or absence of flower(s) was a nominal value between 0 and 10 for each species at each site. We then collected at least three leaves (up to 30 for small and light leaves) from each of the first three individuals selected from each species for determination of leaf dry matter content (LDMC) and specific leaf area (SLA). For calculations of LDMC and SLA, fresh leaves were scanned on a flatbed scanner to determine leaf area. Leaves were then weighed on a balance to a precision of +/- 0.001g, prior to being air dried and reweighed with a balance to a precision of +/- 0.0001g. LDMC was calculated by dividing dry leaf mass by fresh leaf mass. SLA was calculated by dividing leaf area by dry leaf mass. Additionally, within an area of 10 cm diameter around the target individual, we determined the tallest neighbouring species and measured its vegetative and generative height, and estimated the percent cover of the target species, other vegetation, rock, and bare soil.
For more details see Rixen et al. 2022, Journal of Ecology.

cold-adapted-plants

display_name: cold-adapted-plants

elevation-gradient

display_name: elevation-gradient

elevation-range

display_name: elevation-range

neighbour-interactions

display_name: neighbour-interactions

plant-traits

display_name: plant-traits

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: intratrait


en: precipitation meteorology swiss-forest-lab relative-humidity long-term meteo wind-speed temperature par climate-change

en: Site photo of the field station (NAF)

en: Site photo of the field station form the side.

en: Data plot of the forest station (NAB)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Forest station data (NAB)

en: Data file.

en: Site aerial photo (Nationalpark)

en: Site aerial photo from both Nationalpark stations. Source: Google. 2016. Site aerial photo from both Nationalpark stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Site photo of the forest station (NAB)

en: Site photo of the forest station from the side.

en: Field station data (NAF)

en: Data plot of the field station (NAF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Nationalpark in Switzerland where one station is located within a natural coniferous forest stand (NAB) with mountain pine (_Pinus mugo_; 210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Nationalpark is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Nationalpark, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: uncertainties endmember-mixing-models stable-water-isotopes plant-water-uptake ecohydrology root-zone review

en: Data set of MEE-20-04-264

en: The following two tables contain information about the data sources of the values reported in Table 1 and 2 in the paper “Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources” published in the journal ‘Methods in Ecology and Evolution’.

en: Data set of MEE-20-04-264 (CSV)

en: The following two tables contain information about the data sources of the values reported in Table 1 and 2 in the paper “Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources” published in the journal 'Methods in Ecology and Evolution'.

ecohydrology

display_name: ecohydrology

endmember-mixing-models

display_name: endmember-mixing-models

plant-water-uptake

display_name: plant-water-uptake

review

display_name: review

root-zone

display_name: root-zone

stable-water-isotopes

display_name: stable-water-isotopes

uncertainties

display_name: uncertainties

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data set of: Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources


maintainer: Anita C. Risch

en: herbivore ammonification mineralization climate grassland nitrification global-change nutrient-network soil nitrogen fertilization

en: Risch et al. 2020 - Raw data for publication "Global impacts of fertilization and herbivore removal on soil net nitrogen mineralization are modulated by local climate and soil properties"

en:
we assessed how the removal of mammalian herbivores (Fence) and fertilization with growth-limiting nutrients (N, P, K, plus nine essential macro- and micronutrients; NPK) individually, and in combination (NPK+Fence), affected potential and realized soil net Nmin across 22 natural and semi-natural grasslands on five continents. Our sites spanned a comprehensive range of climatic and edaphic conditions found across the grassland biome. We focused on grasslands, because they cover 40-50% of the ice-free land surface and provide vital ecosystem functions and services. They are particularly important for forage production and C sequestration. Worldwide, grasslands store approximately 20-30% of the Earth’s terrestrial C, most of it in the soil (Schimel, 1995; White et al., 2000).

Study sites and experimental design
The 22 sites contributing to this project are part of the Nutrient Network Global Research Cooperative (NutNet, https://nutnet.umn.edu/). Mean annual temperature across our 22 sites ranged from -4 to 22°C, mean annual precipitation from 252 to 1,592 mm, and elevations from 6 to 4,261 m above sea level (Fig. 1, Supplementary Table S1). Soil organic C varied from 0.8 to 7.8%, soil total N from 0.1 to 0.6%, and the soil C:N ratio from 9.1 to 21.5. Soil clay content spanned from 3.0 to 35%, and soil pH from 3.4 to 7.6 (Supplementary Table S2). Thus, the sites covered a wide range of environments in which grasslands occur (Fig. 1, Supplementary Table S1 & S2).
At each site, the effects of nutrient addition and herbivore removal were tested via a randomized-block design (Borer et al., 2014; Supplementary Fig. S1a). Three replicate blocks with 10 treatment plots each were established at each site, with the exception of the site at bldr.us, where only two blocks were established (Supplementary Fig. S1a). The 10 plots were randomly assigned to a nutrient or fencing treatment, but only a subset of four plots was used in the current study, each with a different treatment (see below; Supplementary Fig. S1a). All plots were 5 x 5 m and divided into four 2.5 x 2.5 m subplots (Supplementary Fig. S1b). Each subplot was further divided into four 1 x 1 m square sampling plots, one of which was set aside for soil sampling (Borer et al., 2014; Supplementary Fig. S1b). Plots were separated by at least 1 m wide walkways.
In this study, we collected data from the following four treatments: (i) untreated control plots (Control), (ii) herbivore removal plots (Fence), (iii) plots fertilized with N, P, K, plus nine essential macro and micronutrients (NPK), and (iv) plots with simultaneous fertilizer addition and herbivore removal (NPK+Fence; Supplementary Fig. S1a). The number of years of treatment differed among sites (2 – 9 years since start of treatment; Supplementary Table S1). For the nutrient additions, all sites applied 10 g N m-2 yr-1 as time-release urea; 10 g P m-2 yr-1 as triple-super phosphate; 10 g K m-2 yr-1 as potassium sulfate. A micro-nutrient mix (Fe, S, Mg, Mn, Cu, Zn, B, Mo, Ca) was applied at 100 g m-2 together with K in the first year of treatments but not thereafter.
The vertebrate herbivore removal treatment (Fence) was established by fencing two plots, one control and one NPK plot, within each of the blocks (Supplementary Fig. S1a). We designed the fences so that they would effectively exclude aboveground mammalian herbivores with a body mass of over 50 g (Borer et al., 2014). At the majority of sites, the height of the fences was 180 cm, and the fence design included wire mesh (1 cm holes) on the first 90 cm along with a 30 cm outward-facing flange stapled to the ground to exclude burrowing animals; climbing and subterranean animals may potentially still access these plots (Borer et al., 2014). For slight modifications in fence design at a few sites see Supplementary Table S3. While most sites only had native herbivores, a few sites (4) were also grazed by domestic animals (Supplementary Table S1).
Potential and realized soil net N mineralization, ammonification, nitrification and other soil properties
Each site participating in the study received a package containing identical material from the Swiss Federal Institute for Forest, Snow and Landscape Research (WSL) to be used for sampling and on-site N incubations. For the field incubation, we followed the protocol by Risch et al. (2015, 2019). Briefly, we drove a 5 x 15 cm (diameter x depth) steel cylinder 13.5 cm deep into the soil after clipping the vegetation at randomized locations in each plot. The top 1.5 cm of the cylinder remained empty to capture incoming N from run-off or deposition with a polyester mesh bag (mesh-size 250 µm) filled with 13.2 ± 0.9 g of acidic and alkaline exchanger resin (1:1 mixture; ion-exchanger I KA/ion-exchanger III AA, Merck AG, Darmstadt). The bag was fixed in place with a metal Seeger ring (Bruetsch-Rüegger Holding, Urdorf, Switzerland). We then removed 1.5 cm soil at the bottom of the cylinder and placed another resin bag to capture N leached from the soil column. The exchange resin was saturated with H+ and Cl- prior to filling the bags by stirring the mixture in 1.2M HCl for 1 h and then rinsing it with demineralized water until the electrical conductivity of the water reached 5 μS/cm. The cylinders were then re-inserted into the cored hole, level with the soil surface, and incubated for an average of 42 days (range 40 to 57days). The individual site coordinators chose the timing of incubation to start approximately six weeks prior to peak plant biomass production. All incubations were completed between February 2015 and January 2016 accounting for differences in growing season between northern and southern hemispheres. At the end of the incubation, the cylinders were re-collected and immediately shipped to WSL in an insulated box together with cold packs to halt further mineralization. Gloves were worn at all times to avoid contamination of the samples. Upon arrival at WSL, we extracted the resin bags and a 20 g subsample of sieved soil (4 mm) separately in a 100 ml PE-bottle with 80 ml 1 M KCl for 1.5 h on an end-over-end shaker and filtered through ashless folded filter paper (DF 5895 150, ALBET LabScience). We measured NO3- (colorimetrically; Norman & Stucki, 1981) and NH4+concentrations (flow injection analysis; FIAS 300, Perkin Elmer) on these filtrates.
At the start of the field incubation, we additionally collected two soil cores of 5 x 12 cm (diameter x depth) in each sampling plot and composited them to measure potential soil net Nmin, soil chemical and biological properties (see below). We also collected an additional sample (5 x 12 cm) to assess soil physical properties, which remained within the steel cylinder. Both ends were tightly closed with plastic caps. Cores were carefully packed to avoid further disturbance, and together with the composited soil samples, were shipped to the laboratory at WSL within a few days after collection.
From the composited samples, we extracted an equivalent of 20 g dry soil with KCl, as described above, and measured NO3- and NH4+concentrations. Realized soil net Nmin was then calculated as the difference between the inorganic N content of samples collected at the end of the incubation (plus N extracted from the bottom resin bag) and the N content at the beginning of the incubation; values were scaled to represent daily mineralization rates (mg N kg-1soil d-1; Risch et al., 2015). Realized soil net Nmin values represent an average period of 42 days prior to peak biomass, typically the highest period of biological activity, and not the entire year (Risch et al., 2019).
A second subsample of the composited sample was used to determine potential soil net Nmin in the laboratory (Risch et al., 2019). Briefly, we weighed duplicate samples (8 g dry soil) into 50-ml Falcon tubes. Soil moisture was brought to 60% of the field capacity of each plot, the Falcon tubes tightly closed and then incubated at 20°C for 42 days in a dark room. Every week the Falcon tubes were opened and ventilated. At the end of the incubation, the soil samples were extracted the same way as described above and NO3- and NH4+ was determined. Potential soil net Nmin was calculated as the difference between the N content before and after the incubation and scaled to represent daily values (mg N kg-1soil d-1). Using our NO3- and NH4+ measures we also calculated potential and realized soil net nitrification and soil net ammonification to be able to better understand the drivers of fertilization and herbivore removal effects on potential and realized soil net Nmin.
A third subsample of the composite soil sample was sieved (2 mm mesh) and microbial biomass (μg Cmic g-1 soil dry weight) was estimated by measuring the maximal respiratory response to the addition of glucose solution (4 mg glucose per g soil dry weight dissolved in distilled water; substrate-induced respiration method) on approximately 5.5 g of soil (Anderson & Domsch, 1978). The rest of the composited sample was dried at 65°C for 48 h, ground and sieved (2 mm mesh) to assess a series of soil chemical properties (Risch et al., 2019). We measured the percentage of clay as an indicator of soil texture (Gee & Bauder, 1986; Risch et al., 2019).
Statistical analyses
Potential and realized soil net Nmin were square root transformed to account for a highly skewed data distribution (yt = sign(y)*sqrt|y|; negative values in the data set impeded log transformation). To assess treatment effects on potential and realized soil net Nmin, we used linear mixed effects models (LMMs) fitted by maximum likelihood using the lme function from the nlme package (version 3.131.1; Pinheiro et al., 2016), R version 3.6.1; R Foundation for Statistical Computing. Treatment (Control, Fence, NPK, NPK+Fence) was a fixed factor, with site and block as random factors, where block was nested within site. We also tested for effects of time since start of treatments in preliminary analyses by adding total treatment years as an additional fixed factor. We did not find a significant effect of years of treatment, and thus dropped this variable from the models. The LMMs were corrected using varIdent if the homogeneity of variance criterion was not met (Pinheiro et al., 2016). To visualize our results, we calculated treatment effects using Cohens’ d statistic (Cohen, 1977; Koricheva et al., 2013). Note that calculating response ratios (or log response ratios) was not possible with our data, as we have both negative and positive values. We also fitted LMMs for potential and realized soil net ammonification and nitrification to gain more insight into how global change affects the processes underpinning potential and realized soil net Nmin. We also sqrt-transformed (see above) these dependent variables. Treatment was included as a fixed factor with random factors as described above. In addition, we assessed how potential and realized soil net Nmin were related to potential and realized soil net ammonification and nitrification, respectively. For this, we calculated site averages for each treatment separately. We then ran LMMs, with potential and realized soil net Nmin as the dependent variable, potential and realized soil net ammonification/nitrification as the independent ones. Site was included as a random factor.
Based on our previous work (Risch et al., 2019) and the existing literature (Schimel & Bennett, 2004; Liu et al., 2017), we developed a priori causal conceptual models of relationships among treatments, environmental drivers, and potential and realized soil net Nmin (Supplementary Fig. S2) to test with structural equation modelling (SEM) using a d-sep approach (Shipley, 2009; Lefcheck, 2016). The variables included in the model were long-term climatic conditions, specifically, site-level mean annual precipitation (MAP) and temperature of the wettest quarter (T.q.wet), plot-level soil texture (clay content) and soil microbial biomass. Mean annual precipitation and T.q.wet were obtained from WorldClim (Hijmans et al., 2005) (http://www.worldclim.org/) and together with the experimental treatments were predicted to directly affect soil properties and soil net Nmin (Supplementary Fig. S2). Soil clay content was, in turn, predicted to affect microbial biomass and soil net Nmin. Because we determined microbial biomass prior to incubating the samples in the laboratory or field, we assumed that the abundance of these microbes would be responsible for N process rates and not vice versa (Supplementary Fig. S2). We tested our conceptual model (Supplementary Fig. S2) using the piecewiseSEM package (version 2.0.2; Lefcheck, 2016) in R 3.4.0, in which a structured set of linear models are fitted individually. This approach allowed us to account for the nested experimental design, and overcome some of the limitations of standard structural equation models, such as small sample sizes (Shipley, 2009; Lefcheck, 2016). We used the lme function of the nlme package to model response variables, including site as a random factor. Good fit of the SEM was assumed when Fisher’s C values were non-significant (p > 0.05). For all significant interactions between covariates and experimental treatments detected in the SEMs, we calculated treatment effect sizes, i.e. the differences in potential or realized soil net Nmin between Control and treatments (Fence, NPK, NPK+Fence) and plotted these values against the climate or soil covariates. Finally, we fitted LMMs for the soil variables included in our SEMs, with treatment as the fixed factor, and with site and block as random factors, where block was nested within site.

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch Anita C., Zimmermann, Stefan, Moser, Barbara, Schütz, Martin, Hagedorn, Frank, Firn, Jennifer, Fay, Philip A., Adler, Peter B., Biederman, Lori A., Blair, John M., Borer, Elizabeth T., Broadbent, Arthur A.D., Brown, Cynthia S., Cadotte, Marc W., Caldeira, Maria C., Davies, Kendi F., di Virgilio, Augustina, Eisenhauer, Nico, Eskelinen, Anu, Knops, Johannes M.H., MacDougall, Andrew S., McCulley, Rebecca L., Melbourne, Brett A., Moore, Joslin L., Power, Sally A., Prober, Suzanne M., Seabloom, Eric W., Siebert, Julia, Silveira, Maria L. , Speziale, Karina L., Stevens, Carly J., Tognetti, Pedro M., Virtanen, Risto, Yahdjian, Laura, Ochoa-Hueso, Raul (accepted). Global impacts of fertilization and herbivore removal on soil net nitrogen mineralization are modulated by local climate and soil properties. Global Change Biology

Please cite this paper together with the citation for the datafile.

We assessed how the removal of mammalian herbivores (Fence) and fertilization with growth-limiting nutrients (N, P, K, plus nine essential macro- and micronutrients; NPK) individually, and in combination (NPK+Fence), affected potential and realized soil net Nmin across 22 natural and semi-natural grasslands on five continents. Our sites spanned a comprehensive range of climatic and edaphic conditions found across the grassland biome. We focused on grasslands, because they cover 40-50% of the ice-free land surface and provide vital ecosystem functions and services. They are particularly important for forage production and C sequestration. Worldwide, grasslands store approximately 20-30% of the Earth’s terrestrial C, most of it in the soil (Schimel, 1995; White et al., 2000).

ammonification

display_name: ammonification

climate

display_name: climate

fertilization

display_name: fertilization

global-change

display_name: global-change

grassland

display_name: grassland

herbivore

display_name: herbivore

mineralization

display_name: mineralization

nitrification

display_name: nitrification

nitrogen

display_name: nitrogen

nutrient-network

display_name: nutrient-network

soil

display_name: soil

en: Anthropogenic change and soil net N mineralization


en: century free-climate-data air-temperature maximum-temperature climate climate-layers precipitation timeseries minimum-temperature

en: CHELSA Technical Documentation

en: As the CHELSA project is continuously expanded, certain new parameters, time scales etc. are not included anymore in the original publication (Karger et al. 2017). We are therefore provide this document as a guideline of the current climatic parameters available and will expand it as new parameters or time periods will become available. Please refer to the version history for changes made in the document.

en: Data Access

media_type: geotiff

format: GeoTIFF

en:
CHELSAcruts is a delta change monthly climate dataset for the years 1901-2016 for mean monthly maximum temperatures, mean monthly minimum temperatures, and monthly precipitation sum. Here we use the delta change method by B-spline interpolation of anomalies (deltas) of the CRU TS 4.01 dataset. Anomalies were interpolated between all CRU TS grid cells and are then added (for temperature variables) or multiplied (in case of precipitation) to high resolution climate data from CHELSA V1.2 (Karger et al. 2017, Scientific Data). This method has the assumption that climate only varies on the scale of the coarser (CRU TS) dataset, and the spatial pattern (from CHELSA) is consistent over time. This is certainly a rather crude assumption, and for time periods for which more accurate data is available CHELSAcruts should be avoided if possible (e.g. use CHELSA V1.2 for 1979-2015). Different to CHELSA V1.2, CHELSAcruts does not take changing wind patterns, or temperature lapse rates into account, but rather expects them to be constant over time, and similar to the long term averages.

CHELSAcruts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

century

display_name: century

climate-layers

display_name: climate-layers

free-climate-data

display_name: free-climate-data

maximum-temperature

display_name: maximum-temperature

minimum-temperature

display_name: minimum-temperature

precipitation

display_name: precipitation

timeseries

display_name: timeseries

en: CHELSAcruts -  High resolution temperature and precipitation timeseries for the 20th century and beyond


en: permafrost borehole ritigraben permos ground-temperature

en: Map of PERMOS borehole network

media_type: URL

en: PERMOS DATA POLICY

en: DATA ACCESS

en:
_ENVIDAT NOTE: Data currently unvailable and measures are being taken to recover and restore the data files._

Processed ground temperature measurements at the Ritigraben permafrost borehole (RIT_0102) in canton Valais, Switzerland. The borehole is located at 2690 m asl on a flat site. The surface material is coarse blocks and borehole depth is 30 m. Thermistors used YSI 44006. Year of drilling 2002. This borehole is part of the Swiss Permafrost network, PERMOS (www.permos.ch). Contact phillips@slf.ch for details of processing applied.

borehole

display_name: borehole

ground-temperature

display_name: ground-temperature

permafrost

display_name: permafrost

permos

display_name: permos

ritigraben

display_name: ritigraben

en: RIT1: Processed permafrost borehole data (2690  m asl), Ritigraben, Switzerland


en: seilruckung qgis-plugin digitale-planung swiss-geo-downloader geoinformationssystem schweizer-geodaten seilaplan open-source digitales-hohenmodell

en:
Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Das Plugin Swiss Geo Downloader, welches für das Open Source Geoinformationssystem QGIS zur Verfügung steht, ermöglicht frei verfügbare Schweizer Geodaten direkt innerhalb von QGIS herunterzuladen und anzuzeigen. Es wurde 2021 von Patricia Moll in Zusammenarbeit mit der eidgenössischen Forschungsanstalt Wald, Schnee und Landschaft WSL entwickelt. In diesem Tutorial beschreiben wir, wie man mit Hilfe des Swiss Geo Downloaders das hochgenaue Höhenmodell swissALTI3D herunterladen und für die Seillinienplanung mit dem Plugin Seilaplan verwenden kann.

Link zum Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link zur Seilaplan-Webseite: https://seilaplan.wsl.ch

digitale-planung

display_name: digitale-planung

digitales-hohenmodell

display_name: digitales-hohenmodell

geoinformationssystem

display_name: geoinformationssystem

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

schweizer-geodaten

display_name: schweizer-geodaten

seilaplan

display_name: seilaplan

seilruckung

display_name: seilruckung

swiss-geo-downloader

display_name: swiss-geo-downloader

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Seilaplan-Tutorial: Herunterladen des DHM mit SwissGeoDownloader


en: wind-speed temperature par climate-change precipitation meteorology swiss-forest-lab relative-humidity long-term meteo

en: Site aerial photo (Novaggio)

en: Site aerial photo from both Novaggio stations. Source: Google. 2016. Site aerial photo from both Novaggio stations. Retrieved November 15, 2016, from https://www.google.ch/maps

en: Site photo of the forest station (NOB)

en: Site photo of the forest station from the side.

en: Field station data (NOF)

en: Data file.

en: Site photo of the field station (NOF)

en: Site photo of the field station from the side.

en: Forest station data (NOB)

en: Data plot of the field station (NOF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the forest station (NOB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Novaggio in Switzerland where one station is located within a natural deciduous forest stand (NOB) with Turkey oak (_Quercus cerris_; 70 yrs), sweet chestnut (_Castanea sativa_; 90 yrs) and silver birch (_Betula pendula_; 70 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Novaggio is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Novaggio, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards