en: spatial-planning land-use-change strategic-spatial-planning strategic-projects urban-transformations large-scale-urban-development-projects europe land-use-transformations

en: QCA data set large-scale urban development projects

en: Please refer to the sections: 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalization in the Metadata for further details on this resource.

en: QCA R script large-scale urban development projects Europe

en:
For the set up of this R script, we used the “QCA” (Duşa, 2019) and “SetMethods” (Oana and Schneider, 2018) R packages.

The following further resources were also used:
Dusa, A. (2019). QCA with R: A comprehensive resource. Springer: Berlin.
Schneider, C. Q., & Wagemann, C. (2012). Set-theoretic methods for the social sciences. A guide to qualitative comparative analysis. Cambridge: Cambridge University Press.
Thomann, E., Oana, I.-E., & Wittwer, S. (2018). Performing fuzzy- and crisp set QCA with R. A user-oriented beginner's guide. Retrieved from http://www.evathomann.com/links/qca-r-manual

en:
Table of Content: 1. General context of the data set "lsUDPs" ; 2. Background and aims of the study using the data set lsUDPs; 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalisation

1. General context of the data set "lsUDPs"
The data set "lsUDPs" has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2020. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, strategic spatial plans) into quantitative land-change modelling approaches at the urban regional level. The first stage (2016-2017) of the CONCUR project focussed on 21 urban regions in Western Europe. The urban regions were selected through a multi-stage strategy for empirical research (see Hersperger, A. M., Grădinaru, S., Oliveira, E., Pagliarin, S., & Palka, G. (2019). Understanding strategic spatial planning to effectively guide development of urban regions. Cities, 94, 96–105. https://doi.org/10.1016/j.cities.2019.05.032 ).

2. Background and aims of the study using the data set lsUDPs
As part of the CONCUR project, a specific task was to examine the relationship between strategic spatial plans and the formulation and implementation (i.e. urban land change) of large-scale urban development projects in Western Europe.
Strategic urban projects are typically large-scale, prominent urban transformations implemented locally with the aim to stimulate urban growth, for instance in the form of urban renewals of deprived neighborhoods, waterfront renewals and transport infrastructures. While strategic urban projects are referred to in the literature with multiple terms, in the CONCOR project we call them large-scale urban development projects (lsUDPs).
Previous studies acknowledged both local and supra-local (or structural) factors impacting the context-specific implementation of lsUDPs. Local governance factors, such as institutional capacity, coordination among public and private actors and political leadership, intertwine with supra-local conditions, such as state re-scaling processes and devolution of state competencies in spatial planning, de-industrialisation and increasing social inequality. Hence, in implementing lsUDPs, multi-scalar factors act in combination.
Because the formulation and implementation of lsUDPs require multi-scalar coordination among coalitions of public and private actors over an extended period of time, they are generally linked to strategic spatial plans (SSPs). Strategic spatial plans convey collective visions and horizons of action negotiated among public and private actors at the local and/or regional level to steer future urban development, and can contain legally binding dispositions, but also indicative guidelines.
The key question remains as to what extent large-scale urban development projects and strategic spatial plans can be regarded as aligned. By alignment, or “concordance”, we mean that strategic projects are formulated and implemented as part of the strategic planning process (“high concordance”), or that the strategic role of projects is reconfirmed in (subsequent) strategic plans (“moderate concordance”). Lack of concordance is found when lsUDPs have been limitedly (or not at all) acknowledged in strategic spatial plans.
We assume that certain local and supra-local factors, characterising the development of the projects, foster (but not strictly “cause”) the degree of alignment between lsUPDs and SSPs. In this study, we empirically examine how, and to what extent, the concordance between 38 European large-scale urban development projects and strategic plans (outcome: CONCOR) has been enabled by five multi-scalar factors (or conditions): (i) the role of the national state (STATE), (ii) the role of (inter)national private actors (PRIVATE), (iii) the occurrence of supra-regional external events (EVENTS), (iv) the degree of transport connectivity (TRANSP), and (v) local resistance from civil society (RESIST). We adopted a (multi-data) case-based qualitative strategy for empirical research and applied the formalised procedure of within- and cross-case comparison offered by fuzzy-set Qualitative Comparative Analysis appropriate for the goal of this study. Based on set theory, QCA formally integrates contextual sensitivity to case specificities (within-case knowledge) with systematic comparative analysis (across-case knowledge).
The research question the data set has been created to reply to is the following: which conditions, and combinations of conditions, enable the concordance between large-scale urban development projects and strategic spatial plans?
The conditions (“independent variables”) considered are. STATE: the set of large-scale urban projects characterized by a high degree of state intervention and support in their formulation and implementation, PRIVATE: the set of large-scale urban projects characterized by a high degree of involvement of (inter)national private actors in their formulation and implementation, EVENTS: the set of large-scale strategic projects whose formulation and implementation have been strongly affected by unforeseen international events and/or global trends, TRANSP: the set of large-scale strategic projects with a high degree of road and/or transit connectivity, and RESIST: set of large-scale strategic projects whose realization has been characterized by resistances that have substantially delayed or modified the project implementation.
The outcome (“dependent variable”) under analysis is CONCOR: the set of large-scale urban projects having a high degree of concordance/alignment/integration with strategic spatial plans

3. The data set lsUDPs

   3.1 Selection of cases and data collection
To generate the current data set on large-scale urban development projects in European urban regions (data set "lsUDPs"), we identified 35 large-scale urban development projects in a sample of the 21 Western urban regions considered in the CONCUR project (see supra, Hersperger et al. 2019): Amsterdam, Barcelona, Copenhagen, Hamburg, Lyon, Manchester, Milan, Stockholm, Stuttgart. The criteria we followed to identify the 35 large-scale urban development projects are: geographical location, size (large-scale), site (located either in the city core or in the larger urban region) and urban function (e.g. housing, transportation infrastructures, service and knowledge economic functions). Employing these criteria facilitated the selection of diverse large-scale urban development projects while still ensuring sufficient comparability.
In 2016, we performed 47 in-depth interviews with experts in urban and regional planning and large-scale strategic projects and infrastructure (i.e. academics and practitioners) about the formulation, implementation and development (1990s–2010s) of each project in each of the 9 selected urban regions. On average, each interviewee answered questions on 3.1 large-scale urban development projects. Three cases were subdivided into two cases because a clear differentiation between specific implementation stages was identified by the interviewees (expansion of the Barcelona airport, cases “bcn_airport80-90” and “bcn_airport00-16”; realisation of Lyon Part-Dieu, cases “lyo_partdieu70-90” and “lyo_partdieu00-16”; MediaCityUK, cases “man_salfordquays80-00” and “man_mediacityuk00-16”). Therefore, from the initial 35 cases, the final number of analysed cases in the lsUDPs dataset is 38.

    3.2 The data set lsUDPs: Data management and operationalisation
Interviews were fully transcribed and analysed through MAXQDA (version 12.3, VERBI GmbH, Berlin, Germany), and intercoder agreement was evaluated on a sample of nine interviews. We also compiled “synthetic case descriptions” (SCD) for each case (totalling more than 160 SCDs) to spot potential inconsistencies among interviewees’ accounts and to facilitate completion of the “calibration table” for each case (see below). An online expert survey distributed to the interviewees (response rate 78%) helped systematise the information collected during the interviews. We also consulted both academic and gray literature on the case studies to check for possible ambiguity and inconsistencies in the interview data, and to solve discrepancies between our assigned set membership scores and questionnaire values. Site visits were also carried out to retrieve additional information on the selected cases.
For each case (i.e. each of the 38 selected large-scale urban development projects), we operationalised each condition (i.e. STATE, PRIVATE, EVENTS, TRANSP, RESIST) and the outcome (CONCOR) in terms of sets, for subsequent application of Qualitative Comparative Analysis. This process is called “calibration”; we used a number of indicators for each condition to qualitatively assess each large-scale project across the conditions. The case-based qualitative assessment was then transformed into fuzzy-set membership values. Fuzzy-set membership values range from 0 to 1, and should be conceived as “fundamentally interpretative tools” that “operationalize theoretical concepts in a way that enhances the dialogue between ideas and evidence” (Ragin 2000:162, in “Fuzzy-set Social Science”. Chicago: University Press). We employed a four-value fuzzy-set scale (0, 0.33, 0.67, 1) to “quantify” into set membership scores the individual histories of cases retrieved from interview data. Only the condition TRANSP was calibrated as a crisp-set (0, 1).
The translation of qualitative case-based information into numerical fuzzy-set membership values was iteratively performed by populating a calibration table following standard practices recently emerged in QCA when dealing with qualitative (interview) data.

europe

display_name: europe

land-use-change

display_name: land-use-change

land-use-transformations

display_name: land-use-transformations

large-scale-urban-development-projects

display_name: large-scale-urban-development-projects

spatial-planning

display_name: spatial-planning

strategic-projects

display_name: strategic-projects

strategic-spatial-planning

display_name: strategic-spatial-planning

urban-transformations

display_name: urban-transformations

education

en: Education and science

en: lsUDPS Large-scale urban development projects in European urban regions


maintainer: Christian G. Sommer

en: snow wind-tunnel kinect wind-crust wind-packing

state: active

type: dataset

en: README

media_type: text/plain

en: Describes the dataset in detail

format: TXT

mimetype: text/plain

en: Processing scripts

media_type: application/zip

en: Contains the Matlab- and R-scripts used to process the Kinect data

format: ZIP

mimetype: application/zip

en: Kinect data

media_type: Link

en: Links to the dataset

format: SERVICE

en:
This data sets contains the Microsoft Kinect data from 15 wind tunnel experiments on wind-packing / wind crust formation. These experiments were performed in the winter 2016/17. The Kinect measures distributed snow depth.

The Kinect data is organized per experiment. Each experiment subfolder contains the processed Kinect depth images and some additional files.

Please refer to the README for more details on the data. The processing scripts are available for download as well. The scripts are mainly provided as documentation and would need to be adjusted to be used.

This dataset is the basis of the following publication:

Sommer C.G., Lehning M. & Fierz C. (2018). Wind Tunnel Experiments: Influence of Erosion and Deposition on Wind-Packing of New Snow. Front. Earth Sci. 6:4. doi: 10.3389/feart.2018.00004

kinect

display_name: kinect

snow

display_name: snow

wind-crust

display_name: wind-crust

wind-packing

display_name: wind-packing

wind-tunnel

display_name: wind-tunnel

fr: Education, science

de: Bildung, Wissenschaft

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Wind crust formation: Microsoft Kinect data


maintainer: Leo Gallus Bont

en: geoprocessing qgis seilaplan openstreetmap accessible-forest forest

en: Preview

media_type: image/png

format: PNG

mimetype: image/png

en: Juypter Notebook for Data Preparation (online)

media_type: ipynb

en: Juypter Notebook for Data Preparation

en: Power lines vector data (close to the area of the sample forest range)

en: Railways vector data (close to the sample forest range)

en: Forest vector data (for sample forest range)

en: Digitised sample perimeter

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

forest

display_name: forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019


maintainer: EnviDat Support

en: snow compression-experiments snow-mechanics x-ray-tomography microstructure

en: README

media_type: TXT

en: README file explaining the organization of the data

en: Snowmicroquakes Data

en: Compression experiments, X-ray images and simulation data with supplemented README file

en:
When snow is compressed with a certain speed, micro-snowquakes are triggered in the porous structure of bonded crystals. The present dataset covers uniaxial compression experiments of snow at different strain rates and concurrent X-ray tomography imaging documenting this feature.

The experiments were conducted in a micro-compression stage operated in the X-ray tomography scanner in the SLF cold laboratory. The dataset comprises the compression force data of 17 compression experiments, the 3D image data from 4 X-ray tomography scans and the results of numerical simulations.

compression-experiments

display_name: compression-experiments

microstructure

display_name: microstructure

snow-mechanics

display_name: snow-mechanics

x-ray-tomography

display_name: x-ray-tomography

education

en: Education and science

en: Compressive stick slip and snow-micro-quakes


maintainer: Sofia Pagliarin

en: imperviousness milan barcelona copernicus urban-atlas soil-sealing

media_type: .csv

media_type: CSV

format: CSV

media_type: mpk

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

en: Information on data sources

en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Soil sealing Barcelona and Milan different territorial levels


maintainer: Esther R. Frei

en: g-tree forest climate-change swiss-alps treeline

en: climate data G-TREE experiment, Davos, Switzerland

en: GTREE Website

en:
G-TREE is a global research network composed of 40 arctic and alpine researchers from around the world. This summer, our field experiment will be established at numerous sites across Canada, France, Norway, Spain, the United States, and Venezuela. Other sites are being developed in Russia, Scotland, and Sweden.

The Stillberg research area is located in the Eastern Swiss Alps near Davos, Switzerland. The site has been used for several long-term monitoring as well as experimental studies for the last four decades. Our G-TREE experiment consists of a lowest site located in a subalpine Larch-Spruce forest (Larici-Picetum) dominated by Larix decidua and Picea abies (1930 m a.s.l.), a transition zone site dominated by alpine shrubs (2100 m a.s.l.), and an uppermost site in an alpine meadow with some dwarf shrubs (2390 m a.s.l.).

climate-change

display_name: climate-change

g-tree

display_name: g-tree

swiss-alps

display_name: swiss-alps

treeline

display_name: treeline

en: G-TREE: Global Treeline Range Expansion Experiment Davos, Switzerland


maintainer: Frank Techel

en: warning-regions danger-level european-alps snow avalanche-forecast

en: shape file warning regions Alps

en: Forecast avalanche danger level

media_type: text/csv

en: contains the highest forecast danger level (dangerLevelMax) for each day and warning region

mimetype: text/csv

en:
This dataset contains the data used in the publication by Techel et al., 2018 _Spatial consistency and bias in avalanche forecasts - a case study in the European Alps_ (Nat Haz Earth Syst Sci).
For details on the data please refer to this publication.
The dataset contains the following:
- shape files for the warning regions in the Alps
- highest forecast danger level for each warning region and day

avalanche-forecast

display_name: avalanche-forecast

danger-level

display_name: danger-level

european-alps

display_name: european-alps

snow

display_name: snow

warning-regions

display_name: warning-regions

en: Forecast avalanche danger level European Alps 2011 - 2015


en: cable-yarding seilaplan open-source swiss-geo-downloader digital-elevation-model geoinformation-system digital-planning swiss-geodata qgis-plugin

en: Herunterladen des DHM mit SwissGeoDownloader

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. The plugin ‘Swiss Geo Downloader’, which is available for the open source geoinformation software QGIS, allows freely available Swiss geodata to be downloaded and displayed directly within QGIS. It was developed in 2021 by Patricia Moll in collaboration with the Swiss Federal Institute for Forest, Snow and Landscape Research WSL. In this tutorial we describe how to download the high accuracy elevation model ‘swissALTI3D’ with the help of the ‘Swiss Geo Downloader’ and how to use it for digital planning of a cable line with the plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to the Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link to Seilaplan website: https://seilaplan.wsl.ch

*********************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Das Plugin Swiss Geo Downloader, welches für das Open Source Geoinformationssystem QGIS zur Verfügung steht, ermöglicht frei verfügbare Schweizer Geodaten direkt innerhalb von QGIS herunterzuladen und anzuzeigen. Es wurde 2021 von Patricia Moll in Zusammenarbeit mit der eidgenössischen Forschungsanstalt Wald, Schnee und Landschaft WSL entwickelt. In diesem Tutorial beschreiben wir, wie man mit Hilfe des Swiss Geo Downloaders das hochgenaue Höhenmodell swissALTI3D herunterladen und für die Seillinienplanung mit dem Plugin Seilaplan verwenden kann.

Link zum Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link zur Seilaplan-Webseite: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geo-downloader

display_name: swiss-geo-downloader

swiss-geodata

display_name: swiss-geodata

education

en: Education and science

en: Seilaplan Tutorial: DTM download with SwissGeoDownloader


en: icecube intercomparison snow specific-surface-area microct

en: Statistics of samples

media_type: XLSX

format: XLS

en: TARTES simulations

en: Jupyter notebook with TARTES simulations.

en: Grain survey of snow particles

en: tbd

en: IceCube and MicroCT data

en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

specific-surface-area

display_name: specific-surface-area

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: M. Carol Resch

en: diversity topsoil-removal restoration grassland long-term-experiment vegetation nematodes

en: Nemadotes and vegetation

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

X: X-Coordinate

Y: Y-Coordinate

Ri.veg: Total number of plant species

Div.veg: Shannon diversity of plant species

Ri.nem: Total number of nematode families

Div.nem: Shannon diversity of nematode families

abund: Total nematode abundance (individuals per 100g dry soil)

MI: Maturity index according to Bongers 1990; calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

PPI: Plant parasite index according to Bongers 1990; calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

PPI.MI: Plant parasite to Maturity index according to Bongers, van der Meulen, & Korthals 1997; calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

CI: Channel index according to Ferris, Bongers, & de Goede 2001 (%); calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

EI: Enrichment index according to Ferris, Bongers, & de Goede 2001 (%); calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

SI: Structure index according to Ferris, Bongers, & de Goede 2001 (%); calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

He.a: Herbivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

He.ecto.a: Herbivorous ectoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

He.endo.a: Herbivorous endoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ba.a: Bacterivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Fu.a: Fungivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Om.a: Omnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ca.a: Carnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Om.Ca.a	Sum of omnivorous and carnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014
CP1.a: C-P (colonizer-persister) class 1 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to enrichment indicators according to Ferris, Bongers, & de Goede 2001

CP2.a: C-P (colonizer-persister) class 2 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to stress indicators according to Ferris, Bongers, & de Goede 2001

CP3.a: C-P (colonizer-persister) class 3 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

CP4.a: C-P (colonizer-persister) class 4 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

CP5.a: C-P (colonizer-persister) class 5 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

CP3-5.a: Sum of C-P3, C-P4 and C-P5 nematode abundance (individuals per 100g dry soil) equivalent to structure indicators according to Ferris, Bongers, & de Goede 2001

protect.sp.pro: plant species categorized into species of concern based on their red list status in Switzerland as well as their protection status in Switzerland and the Canton Zurich (Moser, Gygax, Bäumler, Wyler, & Palese, 2002)

tar.sp: Number of target species (all species recorded in the eleven target plots plus propagules of species applied by hand, resulting in a total of 143 species)

Indi.moist: Plant indicator values for soil moisture according to Landolt et al. 2010

Indi.nutri: Plant indicator values for soil nutrients according to Landolt et al. 2010

Management: level of mowing and manuring frequency (35-40 kg N ha-1 application-1); intensity1 = mowing once and no manure; intensity2 = 2-3 times mowing and no manure; intensity3 = 2-3 times mowing and manuring; intensity4 = 4-5 times mowing and manuring

Tillage: last time of tillage

Land.use.history: for Initial plots = recent agricultural use; for all restored sites = agricultural use before restoration
Mowing	earliest date of biomass harvesting (excluding “Initial”) based on contracts between farmers and the Nature Protection Agency of Zurich

Soil.type: based on soil mapping survey 1991 (before restoration)

Soil.texture: determined by the sediment method (Gee & Bauder 1986) and classified into soil textural classes according to FAO (1990)

pH: soil pH (CaCl2)

Slope: slope gradient classes according to FAO (1990; %)

en: Plant community composition (plant species)

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

column 3-252: Plant abundance per species (in total 252 plant species) expressed as cover percentage estimation according to van der Maarel (vdM 1979; 7 classes: 1-7); nomenclature according to Lauber & Wagner (1996)

en: Coordinates of one research plot were wrong. This was corrected in the current version of the file.

en: Nematode feeding types

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

He.ecto.a: Herbivorous ectoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

He.endo.a: Herbivorous endoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ba.a: Bacterivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Fu.a: Fungivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Om.a: Omnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ca.a: Carnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

en: Nematode families

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

column 3-41: Nematode abundance (individuals per 100g dry soil) per family; nomenclature according to Bongers 1988

en: Nematode colonizer-persister classes

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

CP1.a: C-P (colonizer-persister) class 1 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to enrichment indicators according to Ferris, Bongers, & de Goede 2001
CP2.a: C-P (colonizer-persister) class 2 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to stress indicators according to Ferris, Bongers, & de Goede 2001
CP3.a: C-P (colonizer-persister) class 3 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990
CP4.a: C-P (colonizer-persister) class 4 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990
CP5.a: C-P (colonizer-persister) class 5 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:
 > Resch, M.C., Schütz, M., Graf, U., Wagenaar, R., van der Putten, W.H., Risch, A.C. 2019. Does topsoil removal in grassland restoration benefit both soil nematode and plant communities? Journal of Applied Ecology 56: 1782-1793.

Please cite this paper together with the citation for the datafile.

 Methods
 Study area and experimental settings
The study was conducted in a nature reserve (Eigental: 47° 27’ to 47° 29’ N, 8° 37’ E, 461 to 507 m a.s.l.) that is located on the Swiss Central plateau close to Zurich airport (Canton Zurich, Switzerland). The mean annual temperature in this area ranges from 8.9 to 10.6 °C, mean annual precipitation from 910 to 1260 mm [10-year average (2007-2017); MeteoSchweiz, 2018]. The main soil types are calcaric to gleyic Cambisol and Gleysols. The reserve was established in 1967 to protect small remnants of oligotrophic semi-natural grasslands (roughly 12 ha). The plant community can be characterized as Molinion and Mesobromion (semi-wet to semi-dry), depending on the site-specific groundwater level and slope inclination (Delarze, Gonseth, Eggenberg, & Vust, 2015). These remnants represent species-rich islands in an otherwise intensively managed agricultural landscape. Semi-natural grasslands covered an area of 60,000 ha in the Canton Zurich in 1939, however, by 2005 only roughly 600 ha remained (Baudirektion Kanton Zürich, 2007). In 1990, the government of Canton Zurich decided to enlarge the nature reserve Eigental. The goal was to incorporate eleven patches of 20 ha adjacent intensively farmed land and transform these patches into semi-natural grasslands. The patches had a different agricultural history, ranging from permanent (no tillage for >50 years) to temporary grassland (as part of crop rotation; last tillage <5 years). On all freshly integrated patches fertilization was stopped in 1992 and from then on biomass was harvested three times a year and removed. After 5 years without noticeable effects on vegetation composition, the Nature Conservation Agency of Canton Zurich decided to increase the restoration efforts. In 1995, a large-scale experiment was initialized to evaluate if certain treatments can facilitate restoration within a reasonable timeframe of 5 to 10 years after treatment implementation.
The three restoration treatments used were:
i. “Harvest only”: Plots are being mowed two to three times a year and the biomass is removed.
ii. “Topsoil”: Topsoil was removed to a depth of 10 to 20 cm, depending on the depth of the O and A horizon, in four randomly selected areas within each of the eleven patches in late autumn 1995. The size of each topsoil removal area depended on individual patch size and was between 2700 and 7000 m2.
iii. “Topsoil+Propagules”: Propagules from target vegetation were added on half of the area where topsoil was removed, using fresh, seed-containing hay originating from a mixture of semi-dry to semi-wet species-rich grasslands of local provenance (within a radius of 7 km). Hay applications were conducted twice in 1995 and 1996. Repeated applications were chosen to account for the low quantity of available plant material per transfer, since area ratio between receptor and donor sites was roughly 1:1. In addition, hand-collected propagules from 15 selected target species of regional provenance (within a radius of 30 km) were equally applied in 1996 and 1997.
“Topsoil” and “Topsoil+Propagules” plots are mowed once a year, and the biomass is removed. Mowing on these plots started five years after the treatment was implemented.
Eleven permanent plots of 5 m x 5 m were randomly established in each treatment to monitor the vegetation development. The experiment was complemented with 11 control plots that represent the initial state of intensively managed grasslands, further referred to as “Initial”, and 11 control plots that represent the targeted state of donor sites for “Topsoil+Propagules”, further referred to as “Target”. Consequently, the experiment consists of 55 plots (5 treatments x 11 replicates). Management of intensively used grasslands includes mowing and fertilizing (manure) between two to five times a year, as well as different tillage regimes (no tillage for >50 years; last time of tillage <5 years).

 Nematode and plant sampling
Soil nematodes were sampled in 2 m x 2 m plots, randomly established at least 2 m away from the vegetation plots. We collected eight soil cores with a 2.2 cm diameter soil core sampler (Giddings Machine Company, Windsor, CO, USA) to a depth of 12 cm (representing the majority of the plant rooting system) in each plot at the beginning of July 2017. The eight cores within each replicate plot were combined, gently homogenized, placed in coolers and transported to the laboratory of NIOO in Wageningen, the Netherlands, within one week. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriator (Oostenbrink, 1960) and concentrated, resulting in 6 mL nematode solution. The nematode solution was subdivided into three subsamples, two for morphological identification and quantification, and one for molecular work (not used in this study). For morphological identification and quantification, nematodes were heat-killed at 90 °C and fixed in 4 % formaldehyde solution (final volume 10 mL per subsample). All nematodes in 1 mL of formaldehyde solution were counted, and a minimum of 150 individuals per 1 mL sample (or all if less nematodes were present) were identified to family level using Bongers (1988). We then extrapolated the numbers of each nematode taxa identified to the entire sample and expressed them per 100 g dry soil for further analyses.
We calculated number of nematode taxa and Shannon diversity and assessed nematode community composition. In addition, we classified the nematode taxa into feeding types (herbivores, bacterivores, fungivores, omni-carnivores), structural and functional guilds (Table S4). Structural guilds assign nematode taxa according to life-history traits into five colonizer-persister (C-P) classes, ranging from one (early colonizers of new resources) to five (persisters in undisturbed habitats; Bongers 1990). C-P classes can be categorized as indicators for nutrient-enriched (C-P1), stressed (C-P2) and structured (C-P3 + C-P4 + C-P5) soil conditions (Ferris, Bongers, & de Goede, 2001). Functional guilds assign nematode taxa according to their C-P classification combined with their feeding habits (Ferris, Bongers, & de Goede, 2001). Based on the structural and functional guild classification we calculated five additional indices to assess soil nutrient status, disturbance and food web characteristics using NINJA (Sieriebriennikov, Ferris, & de Goede, 2014). 1) The Maturity index indicates the degree of different environmental perturbations (e.g., tillage, nutrient enrichment, pollution) and is used to monitor colonization and subsequent succession after disturbances (Bongers, 1990). 2) The ratio between the Plant Parasite (C-P of herbivorous nematodes only) to Maturity index is used to monitor the recovery of disturbed habitats incorporating information of life-history traits for all feeding types (Bongers, van der Meulen, & Korthals, 1997). 3) The Enrichment index indicates nutrient-enriched soils and agricultural management practices (Ferris, Bongers, & de Goede, 2001). 4) The Structure index provides information about the succession stage of the soil food web and therefore correlates with the degree of maturity of an ecosystem (Ferris, Bongers, & de Goede, 2001). 5) The Channel index provides information about the predominant decomposition pathways, where higher values stand for a higher proportion of energy transformed through the slow fungal decomposition channel (Ferris, Bongers, & de Goede, 2001). In addition, the Structure and Enrichment indices can be displayed in a biplot where nematode assemblages are plotted along a structure (x-axis) and enrichment (y-axis) trajectory (increasing index values). Each biplot quadrat reflects different levels of disturbance, soil nutrient pools and decomposition pathways (Ferris, Bongers, & de Goede, 2001).
The plant surveys were conducted on the 25 m2 permanent plots in June 2017. Plant species cover was visually assessed according to the semi-quantitative cover-abundance scale of Braun-Blanquet (1964; nomenclature: Lauber & Wagner, 1996). We calculated number of species and Shannon diversity, and assessed plant community composition. We also counted the number of target species (all species recorded in the eleven target plots plus propagules of species applied by hand, resulting in a total of 143 species) and categorized plant species into species of concern based on their red list status in Switzerland as well as their protection status in Switzerland and the Canton Zurich (Moser, Gygax, Bäumler, Wyler, & Palese, 2002). Furthermore, we calculated indicator values for soil moisture and soil nutrients for each species according to Landolt et al. (2010).

 References
Baudirektion Kanton Zürich (2007). 10 Jahre Naturschutz-Gesamtkonzept für den Kanton Zürich 1995-2005 – Stand der Umsetzung. Zürich: Baudirektion Kanton Zürich.
Bongers, T. (1988). De nematoden van Nederland. Utrecht: Stichting Uitgeverij Koninklijke Nederlandse Natuurhistorische Vereniging.
Bongers, T. (1990). The maturity index: an ecological measure of environmental disturbance based on nematode species composition. Oecologia, 83, 14-19. doi:10.1007/BF00324627
Bongers, T., van der Meulen, H., & Korthals, G. (1997). Inverse relationship between the nematode maturity index and plant parasite index under enriched nutrient conditions. Applied Soil Ecology, 6, 195-199. doi:10.1016/S0929-1393(96)00136-9
Braun-Blanquet, J. (1964). Pflanzensoziologie, Grundzüge der Vegetationskunde (3rd ed.). Wien: Springer.
Delarze, R., Gonseth, Y., Eggenberg, S., & Vust, M. (2015). Lebensräume der Schweiz: Ökologie - Gefährdung - Kennarten (3rd ed.). Bern: Ott.
Ferris, H., Bongers, T., & de Goede, R.G.M. (2001). A framework for soil food web diagnostics: extension of the nematode faunal analysis concept. Applied Soil Ecology, 18, 13-29. doi:10.1016/S0929-1393(01)00152-4
Landolt, E., Bäumler, B., Erhardt, A., Hegg, O., Klötzli, F., Lämmler, W., … Wohlgemuth, T. (2010). Flora indicativa. Ecological indicator values and biological attributes of the Flora of Switzerland and the Alps (2nd ed.). Bern: Haupt.
Lauber, K., & Wagner, G. (1996). Flora Helvetica. Flora der Schweiz. Bern: Haupt.
MeteoSchweiz (2018). Klimabulletin Jahr 2017, Zürich: MeteoSchweiz.
Moser, D., Gygax, A., Bäumler, B., Wyler, N., & Palese, R. (2002) Rote Liste der gefährteten Farn- und Blütenpflanzen der Schweiz. Bern: BUWAL.
Oostenbrink, M. (1960). Estimating nematode populations by some selected methods. In N.J. Sasser & W.R. Jenkins (Eds.), Nematology (pp. 85-101). Chapel Hill: University of North Carolina Press.
Sieriebriennikov, B., Ferris, H., & de Goede, R.G.M (2014). NINJA: An automated calculation system for nematode-based biological monitoring. European Journal of Soil Biology, 61, 90-93. doi:10.1016/j.ejsobi.2014.02.004

diversity

display_name: diversity

grassland

display_name: grassland

long-term-experiment

display_name: long-term-experiment

nematodes

display_name: nematodes

restoration

display_name: restoration

topsoil-removal

display_name: topsoil-removal

vegetation

display_name: vegetation

en: Grassland restoration: nematodes and plant communities


en: ice-nucleation clouds backward-trajectories raclets aerosol

en: This dataset contains number concentrations of ice-nucleating particles active at -15 °C observed at Weissfluhjoch during February and March 2019, as well as complementary data (measured aerosol number concentrations and modelled total precipitation along air mass trajectories). This data formed the basis of our paper with the title “Towards parameterising atmospheric concentrations of ice-nucleating particles active at moderate supercooling”.

aerosol

display_name: aerosol

backward-trajectories

display_name: backward-trajectories

clouds

display_name: clouds

ice-nucleation

display_name: ice-nucleation

raclets

display_name: raclets

education

en: Education and science

en: Ice nucleating particle concentrations active at -15 °C at Weissfluhjoch


maintainer: Joan Casanelles Abella

en: osmia-bicornis trap-nest hylaeus-communis plant-pollinator-interactions tartu poznan cavity-nesting-bees osmia-cornuta dna-metabarcoding zurich chelostoma-florisomne urban-ecology paris antwerp

en: Larval food composition

en: Explanation data variables

en: Urbanization poses threats and opportunities for the biodiversity of wild bees. A main gap relates to the food preferences of wild bees in urban ecosystems, which usually harbour large numbers of plant species, particularly at the larval stage. This data sets describes the larval food of four wild bee species (i.e. Chelostoma florisomne, Hylaeus communis, Osmica bicornis and Osmia cornuta) and three genera (i.e. Chelostoma sp., Hylaeus sp, and Osmia sp.) common in urban areas in five different European cities (i.e. Antwerp, Paris, Poznan, Tartu and Zurich). This data results from a European-level study aimed at understanding the effects of urbanization on biodiversity across different cities and citiscapes, and a Swiss project aimed at understanding the effects of urban ecosystems in wild bee feeding behaviour. Wild bees were sampled using standardized trap-nests in 80 sites (32 in Zurich and 12 in each of the remaining cities), selected following a double gradient of available habitat at local and landscape scales. Larval pollen was obtained from the bee nests and identified using DNA metabarconding. The data provides the plant composition at the species or genus level of the different bee nests of the studied species in the studied sites of the five European cities. For Hylaeus communis, this is the first study in reporting larval food composition.

antwerp

display_name: antwerp

cavity-nesting-bees

display_name: cavity-nesting-bees

chelostoma-florisomne

display_name: chelostoma-florisomne

dna-metabarcoding

display_name: dna-metabarcoding

hylaeus-communis

display_name: hylaeus-communis

osmia-bicornis

display_name: osmia-bicornis

osmia-cornuta

display_name: osmia-cornuta

paris

display_name: paris

plant-pollinator-interactions

display_name: plant-pollinator-interactions

poznan

display_name: poznan

tartu

display_name: tartu

trap-nest

display_name: trap-nest

urban-ecology

display_name: urban-ecology

zurich

display_name: zurich

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Larval food composition of four wild bee species in five European cities


en: alptal first-order-catchment subalpine runoff meteorological-data snow

en: Manual snow measurements Alptal (1968-2020)

en:
Snow depth, snow density and snow water equivalent have been measured since winter 1968/69 along more than 15 transects distributed across the Alptal valley representing different altitudes, aspects and land use (closed forest and open meadows). Length of the snow courses: 20 to 30 m. The measurement interval has been weekly to monthly.
More details about the locations and methods can be found in Stähli, M.; Gustafsson, D., (2006). Long-term investigations of the snow cover in a subalpine semi-forested catchment. Hydrological Processes, 20, 411-428. doi: 10.1002/hyp.6058.

en: Daily meteorological and snow data (1968-2019) Alptal

en:
Air temperature, dew point temperature, relative humidity, wind speed, precipitation and global radiation have been measured (since 1981) on a meadow (Erlenhöhe) in the Erlenbach catchment. It is located at 1'220 m a.s.l. with an exposure towards west. In order to assess the spatial variability of precipiation, two additional rain gauges have been running in the Vogelbach and Lümpenenbach catchment, respectively.
For the period before 1981, meteorological variables have been extrapolated from the nearby MeteoSwiss station Einsiedeln (ca. 15 km north) to the WSL station Erlenhöhe using a linear correction factor for air temperature, wind speed and precipitation.
Snow depth has been recorded automatically since 2003.

en: Daily runoff data from three steep torrents in the Alptal (1968-2019)

en: Runoff, water temperature and electrical conductivity have been measured since 1968 at the outlet of three torrential catchments (with an area of approximately 1 km2 each) located in the Alptal valley: Erlenbach, Lümpenenbach and Vogelbach. This data set provides daily mean values; data at 10-min resolution can be provided on request for the period 1984-2020 (contact: alptal@wsl.ch).

en:
This data set includes 52 years of hydrometeorological measurements from small (first-order) catchments in the pre-alpine valley Alptal. Here we provide daily mean values; values in sub-daily resolution can be provided on demand.
Runoff has been measured at the outlet of three small (first-order) catchments of approximately 1 km2 area: Erlenbach (two independent runoff measurements), Vogelbach and Lümpenenbach. The catchments are similar with regard to geology (Flysch) and soil conditions (clay soils), but differ in forest coverage (20 to 60%). A detailed description of the catchments can be found at https://www.wsl.ch/alptal .
Runoff in these small catchments is typically very dynamic and can temporally carry large amounts of sediment and large wood. Thus, the accuracy of the measurements at very large flow is limited.
Meteorological variables have been measured on a meadow (Erlenhöhe) located in the Erlenbach catchment at 1220 m a.s.l. using a standard meteorological station (incl. ventilated air temperature and heated rain gauges). In addition, precipitation has also been recorded at two other locations (in the Vogelbach and Lümpenenbach catchments).
Snow measurements have been conducted weekly to monthly since 1968 at more than 15 locations (30-m transects) representing different altitudes, aspects and land uses (meadow, forest). In addition, snow depth has been recorded continuously since 2003 at Erlenhöhe, and for this location we also include a simulation of snow depth and SWE (using the numerical model COUP) that assimilates the manual weekly snow-course measurements. Details on these snow measurements can be found in Stähli, M. and Gustafsson, D. 2006. Hydrol. Proc., 20, 411-428. doi: 10.1002/hyp.6058.

Further information on the methods and sensors can be found at https://www.wsl.ch/alptal .

A first version of this data set (for the period 1968-2017) was uploaded in June 2018 at the occasion of the 50-year anniversary. This original data set was updated in February 2021 (with data from 2018 and 2019), and this data set was used for a longterm trend analysis, submitted for publication in a special issue of Hydrological Processes.

alptal

display_name: alptal

first-order-catchment

display_name: first-order-catchment

meteorological-data

display_name: meteorological-data

runoff

display_name: runoff

snow

display_name: snow

subalpine

display_name: subalpine

en: Longterm hydrological observatory Alptal (central Switzerland)


en: snow-mechanics snow-failure snow-avalanche acoustic-emissions viscous-deformation fiber-bundle-model sintering snow

en: fiber-bundle-model-for-snow-failure

en: Data underlying Figures in publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted to "Geophysical Research Letters"

en:
This dataset contains modeled and experimental results for laboratory snow failure experiments and the concurrent acoustic emissions signatures for different loading rates. For modelling the snow failure we used a fiber bundle model that includes sintering and viscous deformation.

The data underlay the figures in the publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted for publication to "Geophysical Research Letters".

acoustic-emissions

display_name: acoustic-emissions

fiber-bundle-model

display_name: fiber-bundle-model

sintering

display_name: sintering

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-mechanics

display_name: snow-mechanics

viscous-deformation

display_name: viscous-deformation

education

en: Education and science

en: Fiber Bundle Model for snow failure and concurrent Acoustic Emissions


en: antarctica consistent python cryowrf aws

media_type: .zip

en: Scripts to preprocess (and download for some databases) atmospheric weather station data. Furthermore, a list of stations and a map can be created to have an overview.

en:
There are many sources providing atmospheric weather station data for the Antarctic continent. However, variable naming, timestamps and data types are highly variable between the different sources. The published python code intends to make processing of different AWS sources from Antarctica easier. For all datasets that are taken into account variables are renamed in a consistent way. Data from different sources can then be handled in one consistent python dictionary.

The following data sources are taken into account:

* AAD: Australian Antarctic Division (https://data.aad.gov.au/aws)
* ACECRC: Antarctic Climate and Ecosystems Cooperative Research Centre by the Australian Antarctic Division
* AMRC: Antarctic Meteorological Research Center (ftp://amrc.ssec.wisc.edu/pub/aws/q1h/)
* BAS: British Antarctic Survey (ftp://ftp.bas.ac.uk/src/ANTARCTIC_METEOROLOGICAL_DATA/AWS/; https://legacy.bas.ac.uk/met/READER/ANTARCTIC_METEOROLOGICAL_DATA/)
* CLIMANTARTIDE: Antarctic Meteo-Climatological Observatory by the italian National Programme of Antarctic Research (https://www.climantartide.it/dataaccess/index.php?lang=en)
* IMAU: Institute for Marine and Atmospheric research Utrecht (Lazzara et al., 2012), https://www.projects.science.uu.nl/iceclimate/aws/antarctica.ph
* JMA: Japan Meteorological Agency (https://www.data.jma.go.jp/antarctic/datareport/index-e.html)
* NOAA: National Oceanic and Atmospheric Administration (https://gml.noaa.gov/aftp/data/meteorology/in-situ/spo/)
* Other/AWS_PE: Princess Elisabeth (PE), KU Leuven, Prof. N. van Lipzig, personal communication
* Other/DDU_transect: Stations D-17 and D-47 (in transect between Dumont d’Urville and Dome C, Amory, 2020)
* PANGAEA: World Data Center (e.g. König-Langlo, 2012)

Important notes

* Information about data sources is available. Some downloading scripts are included in the provided code. However, users should make sure to comply with the data providers terms and conditions.
* Given changing download options of the differnent institutions the above links may not permanently work and data has to be retrieved by the user of this dataset.
* No quality control is applied in the provided preprocessing software - quality control is up to the user of the datasets. Some dataset are quality controlled by the owner.

Acknowledgements
--------------------------
We thank all the data providers for making the data publicly available or providing them upon request. Full acknowledgements can be found in Gerber et al., submitted.

References
---------------
Amory, C. (2020). “Drifting-snow statistics from multiple-year autonomous measurements in Adélie Land, East
Antarctica”. The Cryosphere, 1713–1725. doi: 10.5194/tc-14-1713-2020

Gerber, F., Sharma, V. and Lehning, M.: CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB, JGR - Atmospheres, submitted.

König-Langlo, G. (2012). “Continuous meteorological observations at Neumayer station (2011-01)”. Alfred Wegener
Institute, Helmholtz Centre for Polar and Marine Research, Bremerhaven, PANGAEA, doi: 10.1594/PANGAEA.
775173

antarctica

display_name: antarctica

aws

display_name: aws

consistent

display_name: consistent

cryowrf

display_name: cryowrf

python

display_name: python

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Preprocessing Antarctic Weather Station (AWS) data in python


en: reservoirs water-scarcity climate-change water-supply water-demand

en: Water demand (deprecated)

en:
Warning: please use the corrected version 2, since this file contains errors for certain categories such as Livestock, Industry or Houshold.

Water demand estimates for the 307 medium-sized catchments for different categories for current and future conditions. One text file is provided per demand category. One column corresponds to one catchment (IDs compare to shapefile), The data are provided at monthly resolution in mm/d and can be converted to volumes by using the catchment area. E.g.
Q[mm/d] * catchment area [m²] /1000 = Q[m³/d]
or to obtain discharge in m³/s
Q[mm/d] * catchment area [m²]/1000/24/3600 = Q [m³/s].
Future irrigation and hydropower water demand are provided per climate model chain.

en: Water supply

en: Simulated discharge series for a reference period 1981-2010 and till the end of the century. Data are provided for 39 climate model chains and a control run based on the observed meteorology. Data are provided at daily resolution (mm/d).

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of 307 catchments for which estimates of water supply, demand, and reservoir volumes are provided. The OBJECTID entry corresponds to the catchment ID which is used as a reference in the other datasets provided.

en: Water demand version 2 (corrected version)

en: Reservoir volumes

en: Reservoir volume for the 307 medium-sized catchments for different storage categories: natural lakes, artificial reservoirs, reservoirs for artificial snow production, drinking water reservoirs, and usable volumes of natural lakes. Unit: Mio m³. One column per catchment (see shapefile).

en:
The dataset Hydro-CH2018 reservoirs provides estimates of current and future water supply, water demand, and storage volumes for 307 medium-sized catchments in Switzerland.
Water supply for current (1981-2010) and future (2070-2099) climate conditions was simulated using the hydrological model PREVAH. For modeling current water supply, observed meteorological time series were used as input, while simulated meteorological time series derived from 39 model chains of the CH2018 initiative were used as an input for simulating future climate conditions.

Water demand was estimated for six categories:

- 1) Drinking water (households and tourism),
- 2) industry (second and third sector),
- 3) artificial snow production,
- 4) agriculture (irrigation and livestock feeding),
- 5) ecology (residual flows), and
- 6) hydropower.

Future estimates consider changes in demand related to population growth and changes in the hydrological conditions.
Storage volumes are provided for natural lakes (storage capacities and usable volumes), artificial reservoirs, reservoirs for artificial snow production, and drinking reservoirs.

A detailed description of the simulation and estimation procedures can be found in

*  Brunner, M.I., Björnsen Gurung, A., Zappa, M., Zekollari, H., Farinotti, D., Stähli, M., 2019. Present and future water scarcity in Switzerland: Potential for alleviation through reservoirs and lakes. Sci. Total Environ. 666, 1033–1047. https://doi.org/10.1016/j.scitotenv.2019.02.169.

This dataset contains the following information:

1.	Shapefile with the 307 medium-sized Swiss catchments.
2.   Textfiles with the water supply simulations for the control run and the 39 climate model chains (one file per chain) at daily resolution for the 307 catchments.
3.	Textfiles with the current and future demand estimates per category at monthly resolution for the 307 catchments.
4.	Textfiles with the storage volumes per category and catchment.

climate-change

display_name: climate-change

reservoirs

display_name: reservoirs

water-demand

display_name: water-demand

water-scarcity

display_name: water-scarcity

water-supply

display_name: water-supply

en: Hydro-CH2018 reservoirs


en: co2 picea-abies forest nitrogen soil face

en: Collection points

en: Collection points under the trees

en: Water analyses

en: Analyses of water, especially soil solution

en: Collection of soil solution

en: Soil solution collected by suction cups

en: Soil C and N

en: Analyses of C, N and their stable isotopes in the soil, and soil pH

en: Gross N mineralisation and nitrification

en: Gross rates of N mineralisation and nitrification (15N dilution)

en: Resin bags

en: Ammonium, nitrate and their 15N in resin bags

en: Data obtained in the free-air CO2 enrichment (FACE) experiment at Hofstetten, NW Switzerland, between 2009 and 2016. This dataset contains analyses of the soil solution throughout the experiment, especially for nitrate, as well as different analyses done at the end of the experiment: ammonium and nitrate captured by ion-exchange resin bags and extracted from soil cores, gross N mineralisation and nitrification measured by isotope dilution.

face

display_name: face

forest

display_name: forest

nitrogen

display_name: nitrogen

picea-abies

display_name: picea-abies

soil

display_name: soil

education

en: Education and science

en: Nitrogen availability under trees exposed to CO2 enrichment (FACE)


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: meteorological-measurements meteo-station davos soil-moisture dischma-catchment

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: IRKIS Soil moisture measurements Davos


en: soil-biodiversity grassland soil-chemistry soil-biology restoration bacteria topsoil-removal biodiversity fungi plants nematodes soil

en: Ecosystem coupling_interactions

en:
Treatment	Treatment groups; Y.4-18 = restored grasslands; Initial = intensively managed grasslands; Target = species-rich semi-wet to semi-dry grasslands
Type	Interactions type; A.A = abiotic.abiotic; A.B = abiotic.biotic; B.B = biotic.biotic
Correlation	non-parametric Spearman rank correlations between biotic and abiotic parameters (ecological interactions)

en: Soil properties

en:
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)
N.pool	Soil nitrogen pool (June 2017); corrected for bulk density and 12 cm sampling depth [kg ha-1 12cm-1]
Corg.pool	Soil organic carbon pool (June 2017); corrected for bulk density and 12 cm sampling depth [kg ha-1 12cm-1]
pH	soil pH [CaCl2]
BD	Bulk density [g cm-3]
FC	Field capacity [%]
Veg.1	principle coordinate axis 1 (vegetation)
Veg.1	principle coordinate axis 2 (vegetation)
Nem.1	principle coordinate axis 1 (nematoda)
Nem.2	principle coordinate axis 2 (nematoda)
Fun.1	principle coordinate axis 1 (fungi)
Fun.2	principle coordinate axis 2 (fungi)
Prok.1	principle coordinate axis 1 (prokaryota)
Prok.2	principle coordinate axis 2 (prokaryota)
Veg.H	Shannon diversity (vegetation)
Nem.H	Shannon diversity (nematoda)
Fun.H	Shannon diversity (fungi)
Prok.H	Shannon diversity (prokaryota)

en: Fungi data

en:
Sample.data
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)

Taxonomy
OTU.ID	consecutive numbers for operational taxonomic units (OTUe 1-7794)
Taxonomic rank	Domain, Phylum, Class, Order, Family, Genus, Species

Abundance
columns	Plot.ID (see Sample.data)
rows	OTU.ID (see Taxonomy)

en: Distance to target results

en:
Community	biotic community (vegetation, nematoda, fungi, prokaryota)
Treatment	Treatment groups; Y.4-30= restored grasslands (time since restoration); Initial=intensively managed grasslands (I)
Comparison	within- or between-community Bray-Curtis dissimilarity distance comparison
Label	within-community distances of initial/restored grasslands: treatment abbreviation; between-communities distances of initial/restored-to-target grasslands: treatment abbreviation plus Target (T; species-rich grasslands)
mean	Mean distance to Target (6 plots per treatment group)
sd	Standard deviation of distances to Target (6 plots per treatment group)

en: Vegetation data

en:
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)
column I-LW	Plant abundance per species (in total 327 plant species) expressed as cover percentage estimation according to van der Maarel (vdM 1979; 7 classes: 1-7); nomenclature according to Lauber & Wagner (1996)

en: Nematode data

en:
Sample.data
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)

Taxonomy
ASV.ID	unit number.letter code per amplicon sequence variant (in total 904)
Taxonomic rank	Phylum, Class, Order, Family, Genus, Species

Abundance
columns	Plot.ID (see Sample.data)
rows	ASV.ID (see Taxonomy)

en: Networks

en:
Treatment	Treatment groups; Y.4-18 = restored grasslands; Initial = intensively managed grasslands; Target = species-rich semi-wet to semi-dry grasslands
Correlation	non-parametric Spearman rank correlations
Vertex.1+2	Comparison between network components; N.pool = total soil nitrogen pool [kg ha-1 12 cm-1]; Corg.pool = soil organic carbon pool [kg ha-1 12 cm-1], pH = soil pH [CaCl2]; BD = bulk density [g cm-3]; FC = field capacity [%]
	PCoA 1 + 2 biotic communities [Veg = vegetation; Nem = nematoda; Fun = fungi; Prok = prokaryota]
Type	Interactions type; A.A = abiotic.abiotic; A.B = abiotic.biotic; B.B = biotic.biotic

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Resch, M.C., Schütz, M., Ochoa-Hueso, R., Buchmann, N., Frey, B., Graf, U., van der Putten, W.H., Zimmermann, S., Risch, A.C. (in review). Long-term recovery of above- and belowground interactions in restored grassland after topsoil removal and seed addition. Journal of Applied Ecology_

Please cite this paper together with the citation for the datafile.

Study area and experimental design
The study was conducted in and around two nature reserves, Eigental and Altläufe der Glatt, which were located approximately 5 km apart (47°27´ to 47°29´ N, 8°37´ to 8°32´ E, 417 to 572 m a.s.l., Canton of Zurich, Switzerland; Figure S1 and S2, Table S1). Mean annual temperature and precipitation are 9.8 ± 0.6 °C and 990 ± 168 mm (Kloten climate station 1988-2018; MeteoSchweiz, 2019). TFor this study, we used a space-for-time approach based on eight restoration sites that were between 3 and 32 years old. We measured recovery and restoration success by comparing the restored grasslands with intensively managed and semi-natural grasslands. Using a space-for-time approach requires high similarities in historical properties of the site, such as soil conditions and management regimes, to assure that temporal processes are appropriately represented by spatial patterns (Walker et al., 2010). This was the case in our study. The restored sites had similar soil conditions (i.e., soil type, structure, water availability) as the targeted semi-natural grasslands, while they shared the same agricultural legacy with intensively managed grasslands, i.e., biomass harvest and fertilization (manure and/or slurry) three to five times a year as well as tillage. We randomly established three 5 m x 5 m (25-m2) plots for plant identification and three 2 m x 2 m (4-m2) subplots for soil biotic and abiotic data collection at least 2 m away from the 25-m2 plots in each restoration site. Sites of similar age were grouped into four age classes: Y.4 (3 & 4 years after restoration), Y.18 (17 & 19 years), Y.24 (23 & 25 years), and Y.30 (27 & 32 years). Six intensively managed (Initial) and six semi-natural grassland (Target) sites complemented the experimental set-up, for a total of 36 plots. All plots were sampled under similar conditions, i.e., day of the year, air temperature, soil moisture, and time since last rain event, in June/July 2017 (intensively managed and semi-natural plots) and 2018 (restored plots).

Collection of plants and selected soil biota data
Plant species cover (in %) was visually estimated in each 25-m2 plot in mid-June (Braun-Blanquet, 1964; nomenclature: Lauber & Wagner, 1996). We calculated Shannon diversity and assessed plant community structure. We included soil microbial (fungi, procaryotes) and nematodes in our study as they represent the majority of soil biotic diversity and abundance (Bardgett & van der Putten, 2014), cover various trophic levels of the soil food web (Bongers & Ferris, 1999), and play key roles in soil functioning and ecosystem processes (Bardgett & van der Putten, 2014). In particular, soil nematodes were found to be well suited belowground indicators to evaluate recovery/development after restoration (e.g. Frouz, et al. 2008; Kardol et al., 2009; Resch et al., 2019). We randomly collected ten soil cores (2.2 cm diameter x 12 cm depths; sampler from Giddings Machine Company, Windsor, USA) in the 4-m2 subplots to assess soil nematode and microbial (fungal, prokaryotic) diversities and community structures. For soil nematodes, eight of the soil cores were combined and gently homogenized, placed in coolers and stored at 4 °C and transported to the laboratory (Netherlands Institute of Ecology, NIOO, Wageningen, Netherlands) within three days after collection. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriators (Oostenbrink, 1960). After extraction, each sample was divided into three subsamples, two for molecular identification and one to determine nematode abundance (see Resch et al., 2019). For the molecular work, two subsamples were stored in 70% ethanol (final volume 10 mL each) and transported to the laboratory at the Swiss Federal Research Institute WSL (Birmensdorf, Switzerland). Each subsample was reduced to roughly 200 μL by centrifugation and removal of the supernatant. The remaining ethanol was vaporized (65 °C for 3 h). Thereafter, 180 μL ATL buffer solution (Qiagen, Hilden, Germany) was immediately added and samples were stored at 4 °C until further processing. From these samples, nematode metagenomic DNA was extracted using the DNeasy Blood & Tissue Kit (Qiagen, Hilden, Germany) according to the manufacturer`s protocol, except for the incubation step which was run at 56 °C for 4 h. PCR amplification of the V6-V8 region of the eukaryotic small-subunit (18S) was performed with 7.5 μL of genomic DNA template (ca. 1 ng/μL) in 25 μL reactions containing 5 μL PCR reaction buffer, 2.5 mM MgCL2, 0.2 mM dNTPs, 0.8 μM of each primer (NemF: Sapkota & Nicolaisen, 2015; 18Sr2b: Porazinska et al., 2009), 0.5 μL BSA, and 0.25 μL GoTaq G2 Hot Start Polymerase (Promega Corporation, Madison, USA). Amplification was using an initial DNA denaturation step of 95 °C for 2 min, followed by 35 cycles at 94 °C for 40 sec, 58 °C for 40 sec, 72 °C for 1 min, and a final elongation step at 72 °C for 10 min. Filtering, dereplication, sample inference, chimera identification, and merging of paired-end reads was implemented using the DADA2 pipeline (v.1.12; Callahan et al., 2016) to finally assign amplicon sequence variants (ASVs) as taxonomic units.
We combined and homogenized the remaining two soil cores to assess soil microbes, placed them in coolers (4 °C) and transported them to the laboratory at WSL. Metagenomic DNA was extracted from 8 g sieved soil (2 mm) using the DNAeasy PowerMax Soil Kit (Qiagen, Hilden, Germany) according to the manufacturer´s protocol. PCR amplification of the V3-V4 region of the small-subunit (16S) of prokaryotes (i.e., bacteria and archaea) and the ribosomal internal transcribed spacer region (ITS2) of fungi was performed with 1 ng of template DNA using PCR primers and conditions as previously described (Frey et al., 2016). PCRs were run in triplicates, pooled and sent to the Genome Quebec Innovation Centre (Montreal, QC, Canada) for barcoding using the Fluidigm Access Array technology (Fluidigm) and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, USA). Quality filtering, clustering into operational taxonomic units (OTUs, 97% similarity cutoffs) and taxonomic assignment were performed as previously described (Resch et al., 2021).Taxonomic classification of nematode, prokaryotic and fungal sequences was conducted querying against the most recent versions of PR2 (v.4.11.1; Guillou et al., 2013), SILVA (v.132; Quast et al., 2013), and UNITE (v.8; Nilsson et al., 2019) reference sequence databases. Taxonomic assignment cutoffs were set to confidence rankings ≥ 0.8 (below ranked as unclassified). Prokaryotic OTUs assigned to mitochondria or chloroplasts as well as OTUs or ASVs assigned to other than Fungi or Nematoda were manually removed prior to data analysis. The three datasets were filtered to discard singletons and doubletons. Taxonomic abundance matrices were rarefied to the lowest number of sequences per community to achieve parity of the total number of reads between samples (Prokaryotes: 10,929 reads; Fungi: 18,337 reads; Nematodes: 6,662 reads). We calculated Shannon diversity and assessed community structures for soil nematodes, prokaryotes and fungi based on their relative abundances of ASV or OTU at the taxon level.

Collection of soil physical and chemical properties
We randomly collected one undisturbed soil core (5 cm diameter, 12 cm depth) per 4-m2 subplot using a steel cylinder that fit into the soil corer. The cylinders were capped to avoid disturbance during transport and used to measure field capacity, rock content and fine earth density as previously described (Resch et al., 2021). We randomly collected another three soil cores (5 cm diameter, 12 cm depths) in each 4-m2 subplot to determine soil chemical properties. The cores were pooled, dried at 60 °C for 48 h and passed through a 2 mm sieve. We measured soil pH (CaCl2) on dried samples, total nitrogen (N) and organic carbon (C) concentration on dried and fine-ground samples (≤ 0.5 mm; for details see Resch et al., 2021). We calculated total N and organic C pools after correcting its concentration for soil depth, rock content and fine earth density.

bacteria

display_name: bacteria

biodiversity

display_name: biodiversity

fungi

display_name: fungi

grassland

display_name: grassland

nematodes

display_name: nematodes

plants

display_name: plants

restoration

display_name: restoration

soil-biodiversity

display_name: soil-biodiversity

soil-biology

display_name: soil-biology

soil-chemistry

display_name: soil-chemistry

topsoil-removal

display_name: topsoil-removal

en: Long-term recovery of above-and belowground interactions in restored grasslands


maintainer: Matthias Haeni

en: long-term precipitation meteorology climate-change swiss-forest-lab par wind-speed relative-humidity meteo temperature

en: Field station data (BAF)

en: Data file.

en: Data plot of the field station (BAF)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

format: PDF

mimetype: application/pdf

en: Site photo of the field station (BAF)

media_type: image/jpeg

en: Site photo of the field station from below (viewing upwards the slope).

mimetype: image/jpeg

en: Site aerial photo (Beatenberg)

en: Site aerial photo from both Beatenberg stations. Source: Google. 2016. Site aerial photo from both Beatenberg stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (BAB)

en: Forest station data (BAB)

en: Site photo of the forest station (BAB)

en: Site photo of the forest station from below (viewing upwards the slope).

en:
High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Beatenberg in Switzerland where one station is located within a natural coniferous forest (BAB) with Norway spruce (_Picea abies_; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Beatenberg is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the
Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Beatenberg, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: meteo relative-humidity swiss-forest-lab wind-speed climate-change par long-term temperature precipitation meteorology

en: Data plot of the forest station (NOB)

en: Site photo of the forest station (NOB)

en: Site photo of the forest station from the side.

en: Site photo of the field station (NOF)

en: Site photo of the field station from the side.

en: Field station data (NOF)

en: Forest station data (NOB)

en: Site aerial photo (Novaggio)

en: Site aerial photo from both Novaggio stations. Source: Google. 2016. Site aerial photo from both Novaggio stations. Retrieved November 15, 2016, from https://www.google.ch/maps

en: Data plot of the field station (NOF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Novaggio in Switzerland where one station is located within a natural deciduous forest stand (NOB) with Turkey oak (_Quercus cerris_; 70 yrs), sweet chestnut (_Castanea sativa_; 90 yrs) and silver birch (_Betula pendula_; 70 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Novaggio is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

en: Novaggio, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards