data-set-on-snow-instability

maintainer: EnviDat Support

title_for_slug: data-set-on-snow-instability

en: weak-layer snow-avalanche snow-stability-evaluation avalanche-forcasting crack-propagation propgatoin-saw-test rutschblock slab slab-tensile-support failure-initiation

en: Read-me file on snow instability data

en: data set on snow instability

en:
These data on snow instability include three data subsets that were analyzed and the results published by Reuter and Schweizer (2018) who suggest a novel framework on how to describe snow instability by failure initiation, crack propagation and slab tensile support.

Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Reuter, B. and Schweizer, J., 2018. Describing snow instability by failure initiation, crack propagation and slab tensile support. Geophys. Res. Lett., 45, doi: 10.1029/2018GL078069.

avalanche-forcasting

display_name: avalanche-forcasting

crack-propagation

display_name: crack-propagation

failure-initiation

display_name: failure-initiation

propgatoin-saw-test

display_name: propgatoin-saw-test

rutschblock

display_name: rutschblock

slab

display_name: slab

slab-tensile-support

display_name: slab-tensile-support

snow-avalanche

display_name: snow-avalanche

snow-stability-evaluation

display_name: snow-stability-evaluation

weak-layer

display_name: weak-layer

en: Data set on snow instability


en: occupancy-models landscape wetlands amphibians conservation

state: active

type: dataset

en: Model code, description

media_type: HTML

en: This is the output of the R markdown file that provides JAGS model code and describes how to format the provided data and fit the dynamic occupancy models described in the associated publication, for a quick overview.

format: HTML

en: Model code

media_type: Rmd

en: This R markdown file contains all code and descriptions necessary to load and format the provided data and to fit the dynamic occupancy models described in the associated publication, including JAGS code for the fitted models.

format: SERVICE

en: Covariate data 2

media_type: CSV

en: This file contains covariate data that changes over time for 856 ponds in 21 years (long format): whether or not a pond exists in year _t_, the age of constructed ponds in year _t_, structural connectivity of the pond in year _t_.

format: CSV

en: Covariate data 1

en: This file contains covariate data that does not change over time for 856 ponds: the region the pond is in, whether the pond is old or new (constructed since 1991), elevation, water surface area, fluctuations of the water table (yes, no), the percent forest cover in 100m radius around the pond, the area or large (>6m wide) roads in 1km radius around the pond.

en: Original raw data

media_type: XLSX

en: This file contains the original raw monitoring data as provided by the canton of Aargau. Access is restricted and only considered upon request and in consultation with the canton of Aargau.

format: XLS

en: Observation data

en: This file contains detection/non-detection data for the 12 amphibian species between 1999 and 2019 for 3 annual visits. Detectable denotes whether or not a visit j was made to pond i in year t. ObservedID gives a unique ID for the observer collecting the data during visit j to pond i in year t.

en: Readme

media_type: PDF

en: Description of methods and datasets.

format: PDF

en:
In the canton of Aargau, hundreds of new ponds have been constructed since the 1990s to benefit declining amphibian populations. This dataset consists of monitoring data for all 12 pond-breeding amphibian species in the canton of Aargau from 1999 to 2019 in 856 ponds, and environmental variables that describe the ponds and the landscape surrounding the ponds. Species observation data is detection/non-detection data from repeat visits during survey years, during which all potentially suitable ponds in an area were surveyed. Environmental variables describing the ponds are whether the pond has been newly constructed since 1991 or not, pond age (if constructed), elevation a.s.l., the water surface area, and whether the water table fluctuates or not. Environmental variables describing the surroundings of the ponds are the percent area of forest within a circular buffer of radius 100m around the pond, the area of large (width ≥6m) roads within a circular buffer of radius 1km around the pond, and structural connectivity.

The canton of Aargau is the owner of the monitoring data; the original datafile is only disclosed upon request and in consultation with the canton of Aargau.

The edited dataset contains cleaned observation data for the 12 amphibian species, as well as compiled and edited covariate data and code to fit dynamic occupancy models.

amphibians

display_name: amphibians

conservation

display_name: conservation

landscape

display_name: landscape

occupancy-models

display_name: occupancy-models

wetlands

display_name: wetlands

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Amphibian observation and pond data (Aargau, Switzerland)


en: number-of-caught-persons avalanche-accidents number-of-dead-persons avalanche-fatalities avalanche-accident-statistics

en: Fatal avalanche accidents in Switzerland since 1995-1996

mimetype: text/csv

en:
This data collection contains information concerning all accidents by snow avalanches causing at least one fatality in Switzerland. The data set commences on 01/10/1995. After the completion of a hydrological year, the new data is added.

The following information is provided:

 * avalanche identifier
 * date of the accident
 * accuracy of the date in range of days before and after
 * canton
 * name of the locality
 * start zone of the avalanche
  * coordinates (Swiss coordinate system, approximately in middle of start zone)
  * accuracy of the coordinates in meters
 * elevation (in meteres above sea level, app. in middle of start zone)
 * slope aspect (main orientation of start zone)
 * slope inclination (in degree, steepest point within start zone)
 * number of dead persons
 * number of caught persons
 * number of fully buried persons
 * forecasted avalanche danger level
 * activity/location of the accident party at the time of the incident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

number-of-caught-persons

display_name: number-of-caught-persons

number-of-dead-persons

display_name: number-of-dead-persons


aerosol-data-davos-wolfgang

title_for_slug: aerosol-data-davos-wolfgang

en: aerosol drincz particles raclets inp ice-nucleation

en: OPC GT-526S Dataset Davos Wolfgang

media_type: text/csv

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en: DRINCZ Dataset Davos Wolfgang

en: The DRINCZ file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en: SMPS Dataset Davos Wolfgang

media_type: application/x-netcdf

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity), in a temporal resolution of 2 minutes, with time in UTC, measured at Davos Wolfgang.

mimetype: application/x-netcdf

en: OPC-N3 Dataset Davos Wolfgang

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: APS Dataset Davos Wolfgang

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Davos Wolfgang.

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs) and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3788 , TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and DRINCZ: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l minˉ¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the DRoplet Ice Nuclei Counter Zurich (DRINCZ, ETH Zurich) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

drincz

display_name: drincz

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

particles

display_name: particles

raclets

display_name: raclets

en: Aerosol Data Davos Wolfgang


en: hydrological-simulations soil-moisture discharge drought-2018 low-flow prevah precipitation

en: Shapefile of 307 catchments in Switzerland

media_type: application/zip

en: Shapefile of 307 catchments for which simulations of precipitation, discharge, soil moisture, and low flow are provided. The OBJECTID entry corresponds to the data columns in the textfiles of the simulated data provided.

format: ZIP

mimetype: application/zip

en: Precipitation

media_type: text/plain

en: Simulated precipitation for the 307 medium-sized catchments. The first column provides the date in the format YYYYMMDD. One column corresponds to one catchment. Unit: mm/d.

format: TXT

mimetype: text/plain

en: Low-flow storage

en: Simulated low-flow storage for the 307 medium-sized catchments. The first column provides the date in the format YYYYMMDD. One column corresponds to one catchment. Unit: mm.

en: Soil moisture

en: Simulated plant-available soil moisture for the 307 medium-sized catchments. The first column provides the date in the format YYYYMMDD. One column corresponds to one catchment. Unit: mm.

en: Discharge

en: Simulated discharge for the 307 medium-sized catchments. The first column provides the date in the format YYYYMMDD. One column corresponds to one catchment. Unit: mm/d.

en: The dataset provides simulated 1) precipitation, 2) discharge, 3) soil moisture, and 4) low-flow simulations for 307 medium-sized catchments in Switzerland for the period 1981-2018. The data were simulated using the hydrological model PREVAH in its gridded-version. The simulated time series are provided at daily resolution. A detailed description of the modeling approach can be found in Brunner et al. 2019 submitted to NHESS.

discharge

display_name: discharge

hydrological-simulations

display_name: hydrological-simulations

low-flow

display_name: low-flow

precipitation

display_name: precipitation

prevah

display_name: prevah

soil-moisture

display_name: soil-moisture

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Hydro-meteorological simulations for the period 1981-2018 for Switzerland


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: dischma-catchment soil-moisture meteo-station davos meteorological-measurements

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

en: IRKIS Soil moisture measurements Davos


rorcc

maintainer: Tobias Wechsler

title_for_slug: rorcc

en: design-discharge hydropower environmental-flow run-of-river-power-plants climate-change

en: RoRCC

media_type: XLS

en:
The dataset “RoRCC” consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
-	metadata on the RoR power plants under consideration
-	annual and seasonal production scenarios differentiated into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)
-	annual and seasonal production loss due to environmental flow requirements
-	annual and seasonal the technical increase potential (via design discharge optimisation)
-	annual and seasonal changes in the hydrological cycle for the three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)

en:
The dataset "RoRCC" consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
1) metadata on the RoR power plants under consideration, 2) annual and seasonal production potential scenarios under into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099), 3) annual and seasonal streamflow scenarios, 4) annual and seasonal production loss due to environmental flow requirements, 5) annual and seasonal the technical increase potential (via design discharge optimisation) and 6) annual and seasonal changes in the hydrological cycle.

climate-change

display_name: climate-change

design-discharge

display_name: design-discharge

environmental-flow

display_name: environmental-flow

hydropower

display_name: hydropower

run-of-river-power-plants

display_name: run-of-river-power-plants


en: forest fractional-snow shading longwave-radiation shortwave-radiation

en: Sky-view fraction along the cablecar transect

en: Data is used and described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research. DOI:10.1029/2018JD029908.

en: Radiation Data 18.04.2019

en:
Spatiotemporal incoming/outgoing shortwave and longwave radiation as well as sunlit and shaded-snow view fractions below an evergreen forest stand in the Swiss alps. Data was collected on 18th of April 2018 along a 48m long, heterogeneous forest stand under full snow cover conditions.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: Seasonal sub-canopy radiation data

en:
Seasonal, spatially aggregated incoming and outgoing shortwave radiation below an evergreen forest stand collected with a cable car system.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover Control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: Radiation Data 25.4.2018

en:
Spatiotemporal incoming/outgoing shortwave and longwave radiation as well as sunlit and shaded-snow view fractions below an evergreen forest stand in the Swiss alps. Data was collected on 25th of April 2018 along a 48m long, heterogeneous forest stand under partial snow cover conditions.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: This data set consists of incoming and outgoing short- and longwave radiation as well as sunlit-snow-view-fraction as described in the JGR-Atmospheres paper "Shading by trees and fractional snow cover control the sub-canopy radiation budget", by Malle et al. (2019). Data was collected along a 48m long, heterogeneous forest transect between January and June 2018 close to Davos, Switzerland.

forest

display_name: forest

fractional-snow

display_name: fractional-snow

longwave-radiation

display_name: longwave-radiation

shading

display_name: shading

shortwave-radiation

display_name: shortwave-radiation


high-resolution-climate-data-for-europe

title_for_slug: high-resolution-climate-data-for-europe

en: air-temperature europe cordex maximum-temperature precipitation daily-climate eur11 minimum-temperature

en: Data Access

media_type: NetCDF

en: CHELSA EUR11 Technical Documentation

en: As the CHELSA project is continuously expanded, certain new parameters, time scales etc. are not included anymore in the original publication (Karger et al. 2017). We are therefore provide this document as a guideline of the current climatic parameters available and will expand it as new parameters or time periods will become available. Please refer to the version history for changes made in the document.

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present downscaled climate data for the CORDEX EUR11 domain at a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperature lapse rates. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height. The resulting data consist of a daily temperature and precipitation timeseries.

The data is distributed under a: Creative Commons: Attribution 4.0 International (CC BY 4.0) license.

air-temperature

display_name: air-temperature

cordex

display_name: cordex

daily-climate

display_name: daily-climate

europe

display_name: europe

maximum-temperature

display_name: maximum-temperature

minimum-temperature

display_name: minimum-temperature

precipitation

display_name: precipitation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: High resolution climate data for Europe


en: aerosol clouds ice-nucleation raclets backward-trajectories

en: This dataset contains number concentrations of ice-nucleating particles active at -15 °C observed at Weissfluhjoch during February and March 2019, as well as complementary data (measured aerosol number concentrations and modelled total precipitation along air mass trajectories). This data formed the basis of our paper with the title “Towards parameterising atmospheric concentrations of ice-nucleating particles active at moderate supercooling”.

aerosol

display_name: aerosol

backward-trajectories

display_name: backward-trajectories

clouds

display_name: clouds

ice-nucleation

display_name: ice-nucleation

raclets

display_name: raclets

en: Ice nucleating particle concentrations active at -15 °C at Weissfluhjoch


digitizing-historical-plague

maintainer: Christian Ginzler

title_for_slug: digitizing-historical-plague

en: plague-inventory bubonic-plague plague-outbreaks plague-mapping palaeo-epidemiology historical-plague black-death yersinia-pestis

en: We present newly digitized data on 6,929 plague outbreaks that occurred between 1347 and 1900 AD across Europe. The data base on an inventory initially published 1976. For georeferencing the information of Tele Atlas 2009 was used. The coordinates are in the reference systems ETRS89 and WGS84.

black-death

display_name: black-death

bubonic-plague

display_name: bubonic-plague

historical-plague

display_name: historical-plague

palaeo-epidemiology

display_name: palaeo-epidemiology

plague-inventory

display_name: plague-inventory

plague-mapping

display_name: plague-mapping

plague-outbreaks

display_name: plague-outbreaks

yersinia-pestis

display_name: yersinia-pestis

en: Digitizing historical plague


radar-wind-profiler-davos-wolfgang

maintainer: Maxim Hervo

title_for_slug: radar-wind-profiler-davos-wolfgang

en: radar wind-speed raclets wind-direction wolfgangpass

en: Radar Wind Profiler Data

en: A Vaisala Lap3000 was installed at Davos Wolfgang to record wind profiles. The time format is number of days fom January 0, 0000 in UTC with a 10 minute resolution.

en: The RADAR wind profiler from Meteoswiss was installed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577) and measured from 2171 m above sea level to 11079 m, with a temporal resolution of 10 minutes.

radar

display_name: radar

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

wolfgangpass

display_name: wolfgangpass

en: RADAR Wind profiler Davos Wolfgang


en: wild-bee switzerland predictive-modelling beta-diversity protected-areas elevation-gradient functional-diversity community-indices anthophila climate biodiversity hymenoptera urbanization resource-availability

media_type: .txt

en:
Lat: latitude community plot
Lon: longitude community plot
Richness: species richness
Shannon: Shannon diversity index
FDis: functional dispersion
TOP: Trait Onion Peeling (functional richness)
TED: Trait Even Distribution (functional evenness)
LCBD_taxo: local community contributions to taxonomic beta diversity
LCBD_fun: local community contributions to functional beta diversity
ITD: community weighted means inter-tegula distance
feeding_specialization: community weighted means feeding specialization
tong_length: community weighted means tongue length
phenostart: community weighted means start of the phenology
phenoduration: community weighted means duration of the phenoloy
cleptoparasite: community weighted means cleptoparasites
belowgound: community weighted means proportion belowground
solitary: community weighted means proportion solitary

en:
Raw data supporting the paper "Countrywide wild bee taxonomic and functional diversity reveal a spatial mismatch between alpha and beta-diversity facets across multiple ecological gradients". It contains taxonomic and functional metrics in 4591 community-plots distributed across Switzerland. The calculated metrics are:
- Alpha taxonomic community metrics: species richness and Shannon diversity
- Alpha functional community metrics: Functional richness (using the Trait Onion Peeling index, TOP), functional eveness (using the Trait Even Distribution index, TED) and the functional dispersion.
- Community weighted means of 8 functional traits
- The local community contributions on the functional and taxonomic beta diversity (LCBD).

anthophila

display_name: anthophila

beta-diversity

display_name: beta-diversity

biodiversity

display_name: biodiversity

climate

display_name: climate

community-indices

display_name: community-indices

elevation-gradient

display_name: elevation-gradient

functional-diversity

display_name: functional-diversity

hymenoptera

display_name: hymenoptera

predictive-modelling

display_name: predictive-modelling

protected-areas

display_name: protected-areas

resource-availability

display_name: resource-availability

switzerland

display_name: switzerland

urbanization

display_name: urbanization

wild-bee

display_name: wild-bee

en: Data on wild bee taxonomic and functional diversity in Switzerland


maintainer: Sofia Pagliarin

en: barcelona soil-sealing copernicus milan urban-atlas imperviousness

media_type: mpk

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

en: Information on data sources

media_type: .csv

en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Soil sealing Barcelona and Milan different territorial levels


maintainer: Roksolana Petrovska

en: fagus mortality-rate shade-tolerance regeneration dominance acer lar

media_type: r script (flat-ascii text)

en: The R-script of survival analysis for accelerated failure time model

en: Mortality of regeneration

en: Acer platanoides, Acer pseudoplatanus and Fagus sylvatica living and dead juveniles (0-500 cm in height) grown in the deep shade of a prime beech-dominated forest.

en:
 One individual per species, vitality class (low and high) and height class (eight classes: 0–10, 11–20, 21–35, 36–60, 61–90, 91–130, 131–200 and 201–500 cm) was randomly selected and harvested in each of the six plots. This resulted in a sample of 82, 80 and 89 living individuals of A. platanoides, A. pseudoplatanus and F. sylvatica, respectively.

 Additionally stems of dead Acer spp. and F. sylvatica trees that had died within the last three years (2015–2018) were randomly harvested, matching the height classes of the harvested living trees wherever possible. In total, 179 dead young trees (60 A. platanoides, 72 A. pseudoplatanus and 47 F. sylvatica) were collected.

 Variables:
* species_code: a_pla - Acer platanoides, a_pse - Acer pseudoplatanus, f_syl - Fagus sylvatica
* species: as above
* dummy: 0 - living individual, 1 - dead individual
* LAR_cm2_g: leaf area ratio or ratio of leaf area to total plant biomass, [cm2/g]
* tree_age: in years
* avg_ring_micron: average width of the last 5 rings in tree life excluding the last ring
* dry_mass_g: aboveground and belowground biomass
* DLI: direct light index (measured only under living individuals)
* BLI: diffuse light index (measured only under living individuals)
* GLI: global light index

acer

display_name: acer

dominance

display_name: dominance

fagus

display_name: fagus

lar

display_name: lar

mortality-rate

display_name: mortality-rate

regeneration

display_name: regeneration

shade-tolerance

display_name: shade-tolerance

en: Mortality of regeneration: Acer spp. and Fagus sylvatica


en: vertical-wind-motion snow-cover boundary-layer-winds snow-depth saltation

en: Data Compilation

media_type: ZIP

en: Compressed TXT files

en:
The data correspond to the experiments presented and discussed in a paper regarding the interaction between turbulent wind fluctuations and snow saltation mass-fluxes (Paterna, 2016). Each of the nine data files corresponds to a different experiment presented in the paper and conducted in the winter 2014/2015 in the WSL/SLF cold wind tunnel in Davos. For each file the five columns indicate the time from the beginning of the experiment, the streamwise (u’) and the vertical (w’) wind velocity fluctuations, the streamwise (qx) and the vertical (qz) snow mass-flux components. From these time-series the scales of the snow saltation and of the turbulent flow are obtained with respect to the eddy-cycles and snow saltation cycles. From spectral analysis of the time-series a decoupling of the snow saltation from the turbulence forcing reveals two regimes of interaction: a turbulence-dependent regime occurring with weak saltation, and a turbulence-independent regime with strong saltation. Further details can be found at the link below.

Publication http://onlinelibrary.wiley.com/doi/10.1002/2016GL068171/abstract

boundary-layer-winds

display_name: boundary-layer-winds

saltation

display_name: saltation

snow-cover

display_name: snow-cover

snow-depth

display_name: snow-depth

vertical-wind-motion

display_name: vertical-wind-motion

en: Wind tunnel measurement data of drifting snow and turbulent wind fluctuations


en: land-change urban-landscape urban-planning landscape-planning concur

media_type: .pdf

en:
Book of abstracts from the virtual conference "From Plans to Land Change: Dynamics of Urban Regions"

Cities and urban regions are among the most dynamic land-use systems in the world, with dramatic consequences for the provision of ecosystem services and the livelihood of people. Planning is a multifaceted activity with extensive experience in the management of these urbanization processes. However, our understanding of planning’s contribution to shaping urban land use, form and structure is still incomplete, with serious consequences for the efficacy of urban planning and land change models.

This international conference aims to bring together the community of scholars working on planning evaluation and urban modelling. The participants are offered the opportunity to present their current research and to discuss how theoretical developments, data sources, comparative studies and modelling approaches might advance the field.

The conference was financially supported by the CONCUR project and sustained by Swiss Federal Research Institute WSL.

concur

display_name: concur

land-change

display_name: land-change

landscape-planning

display_name: landscape-planning

urban-landscape

display_name: urban-landscape

urban-planning

display_name: urban-planning

en: From Plans to Land Change: Dynamics of Urban Regions. Book of Abstracts


backward-trajectories

maintainer: Michael Sprenger

title_for_slug: backward-trajectories

en: raclets backward-trajectories complex-topopgraphy atmospheric-dynamics cosmo lagrangian-analysis alps

en: Backward Trajectories

en: The trajectories are started from surface up to 5000 m altitude, with an equidistant vertical spacing of 200 m, and calculated 120 h backward in time. As long as the trajectories stay in the COSMO1 domain (essentially the Alpine region), as run operationally at MeteoSwiss, the COSMO analysis wind fields are used. When the trajectories leave this domain, they are extended further backward in time based on ECMWF analysis data. The following fields are traced along the trajectories: longitude, latitude, geopotential height, pressure, specific humidity, temperature and surface topography. Furthermore, it is indicated for each trajectory time instance on which model data, COSMO or ECMWF, the trajectory time is based. Finally, the trajectories are started every hour in the specified time period, and positions and fields are available every 10 min. Each day is saved as a separate file. The last 8 digits of the file names indicate the starting date of the trajectories.

en: Backward trajectories were calculated from two positions: Davos Wolfgang (LON: 9.85361, LAT: 46.83551) and Weissfluhjoch (LON: 9.80646 LAT: 46.83304) for the time period February 2 until March 27 2019 using COSMO or ECMWF, respectively.

alps

display_name: alps

atmospheric-dynamics

display_name: atmospheric-dynamics

backward-trajectories

display_name: backward-trajectories

complex-topopgraphy

display_name: complex-topopgraphy

cosmo

display_name: cosmo

lagrangian-analysis

display_name: lagrangian-analysis

raclets

display_name: raclets

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Backward  Trajectories


en: cmip5 climate-change orographic-precipitation precipitation-amount air-temperature

en: Download Server

en:
Predicting future climatic conditions at high spatial resolution is essential for many applications in science. Here we present data for monthly time series of precipitation and minimum and maximum temperature for four downscaled global circulation models. We used model output statistics in combination with mechanistic downscaling (the CHELSA algorithm) to calculate mean monthly maximum and minimum temperatures, as well as monthly precipitation sums at ~5km spatial resolution globally for the years 1850-2100. We validated the performance of the downscaling algorithm by comparing model output with observed climates for the years 1950-2069.

CHELSA_cmip5_ts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

climate-change

display_name: climate-change

orographic-precipitation

display_name: orographic-precipitation

precipitation-amount

display_name: precipitation-amount

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: High resolution monthly precipitation and temperature timeseries for the period 2006-2100


maintainer: Yohann Chauvier

en: background-data covariate-correction independent-dataset target-group survey-effort random-stratified-sampling cluster point-process-model environmental-stratification plant-species

en: Non-copyright data, scripts, diversity outputs

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models


maintainer: Christoph Marty

en: hydrology water-cycle snowfall climate-change-impacts snow

en: Synthesis report chapter

media_type: application/pdf

mimetype: application/pdf

en: DORA Persistent URL

en:
This report was prepared as one of the synthesis report chapters of the Hydro-CH2018 project of the Federal Office for the Environment (FOEN). An important feature of snow cover is the fact that its volume and duration is subject to large year-to-year fluctuations. As frozen precipitation, snow cover is nothing other than a natural water reservoir that delays precipitation to runoff and is thus of outstanding importance for the seasonal water balance in Switzerland. Over a whole year, approximately 40% (22 km3) of the annual runoff currently comes from snow melting and only 1% from glacier melting. Typically, the snow cover in the Alpine region builds up over the autumn and winter months, reaches its maximum between February and May, depending on the altitude, and dominates the runoff processes during melting in the following spring and summer months.
Due to the great dependence on minus temperatures and precipitation, the snow cover reacts sensitively to temperatures above 0° Celsius and more or less precipitation. Due to climate change and the associated warming, the proportion of precipitation that falls as snow decreases measurably. In addition to this reduction in snowfall, the warmer temperatures also cause the snow cover to melt more quickly. The decline in snowfall has so far mainly affected lower altitudes, where winter temperatures often reach positive levels.
As climate change progresses, this trend is likely to continue and above all affect higher zones. Even at higher altitudes, the snow cover will then start later, melt away earlier and is increasingly no longer permanently present. This development will also have an effect on the water bodies. Today nival regimes, i.e. regimes shaped by snow, are shifting towards pluvial regimes, i.e. regimes dominated by rain. Overall, winter runoff increases, summer runoff decreases. By the end of the century, the proportion of runoff from snowmelt will decrease throughout Switzerland, albeit to a lesser extent than the proportion from glacier melt.

climate-change-impacts

display_name: climate-change-impacts

hydrology

display_name: hydrology

snow

display_name: snow

snowfall

display_name: snowfall

water-cycle

display_name: water-cycle

en: Snow and the water cycle in a changing climate


maintainer: Michael Lehning

en: snow alpine3d-simulations snow-hydrology snow-distribution alpine3d snow-cover alpine-precipitation

en: ADS datasets and simulation inputs

en: The file contains the ADS datasets of snow depth and input data used for simulations.

en:
Dataset (Model input, snow distribution and validation) for the precipitation scaling paper, which should be cited along with the data set citation.

This data is useful for distributed hydrological modelling or other tasks that involve the study of snow distribution and precipitation in the high Alpine.

The format of the data is for Alpine3D (models.slf.ch) model runs but other models could be used, too.

Please cite:

_Vögeli, C., Lehning, M., Wever, N., Bavay M., 2016: Scaling Precipitation Input to Spatially Distributed Hydrological Models by Measured Snow Distribution., Front. Earth Sci. 4: 108. doi: 10.3389/feart.2016.00108._

Dataset is provided as a single zip file.
The archive contains two directories, the valuable distributed snow depth maps for the landscape Davos and the simulation input.
The archive also contains the file: "ReadMeMetadataDataSetPrecipitationScaling" which explains the data structure.

alpine-precipitation

display_name: alpine-precipitation

snow-cover

display_name: snow-cover

snow-distribution

display_name: snow-distribution

snow-hydrology

display_name: snow-hydrology

education

en: Education and science

en: Precipitation Scaling Data Set (Vögeli et al., Frontiers)


lwf-tea-bag-sites

maintainer: Marcus Schaub

title_for_slug: lwf-tea-bag-sites

en: carbon green-tea modeling tea-bag decomposition roiboos forest verification litter

en: Site Information

en: Descriptive information on sites

en:
Decomposition of plant litter is a key process for the transfer of carbon and nutrients in ecosystems. Carbon contained in the decaying biomass is released to the atmosphere as respired CO2, and may contribute to global warming. Litterbag studies have been used to improve our knowledge of the drivers of litter decomposition, but they lack comparability because litter quality is plant species-specific. The use of commercial tea bags as a standard substrate was suggested in order to harmonize studies, where green tea and rooibos represent more labile and more recalcitrant C compounds as surrogates of local litter.
The tea bag approach was implemented on eight sites of the Swiss long-term Forest Ecosystem Research (LWF) network (https://www.wsl.ch/LWF). This allowed us to take advantage from the existing infrastructure and data from a previous litterbag study with local litter. In Beatenberg and Schaenis, additional elevation transects were established (1200-1800 m and 540-1150 m, respectively) to examine particularly the effect of temperature on decomposition. In Pfynwald (https://www.wsl.ch/de/ueber-die-wsl/versuchsanlagen-und-labors/flaechen-im-wald/pfynwald.html) and Salgesch, infrastructure of running projects was used to examine the effect of drought and understory removal, respectively. In Novaggio, tea bags were incubated in summer and winter to study the effect of seasonality particularly precipitation. Tea bags are collected after 3, 12, 24, and 36 months; for the two time-shifted experiments additionally after 6 and 9 months.
The study has two primary objectives. Firstly, it contributes to TeaComposition initiative (http://teacomposition.org/) which aims at investigating long-term litter decomposition and its key drivers at present as well as under different future climate scenarios using a common protocol and standard litter (tea) across nine terrestrial biomes. Secondly, the data are used to further develop decomposition models such as Yasso (http://en.ilmatieteenlaitos.fi/yasso) which is used by several countries, including Switzerland to estimate the annual carbon fluxes in dead wood, litter, and soil for reporting in National Greenhouse Gas Inventories under the United Nations Framework Convention on Climate Change and the Kyoto Protocol.

carbon

display_name: carbon

decomposition

display_name: decomposition

forest

display_name: forest

green-tea

display_name: green-tea

litter

display_name: litter

modeling

display_name: modeling

roiboos

display_name: roiboos

tea-bag

display_name: tea-bag

verification

display_name: verification

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: LWF-Tea bag sites


maintainer: Leo Gallus Bont

en: accessible-forest openstreetmap forest geoprocessing qgis seilaplan

en: Railways vector data (close to the sample forest range)

en: Power lines vector data (close to the area of the sample forest range)

en: Forest vector data (for sample forest range)

en: Preview

media_type: image/png

format: PNG

mimetype: image/png

en: Digitised sample perimeter

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en: Juypter Notebook for Data Preparation (online)

media_type: ipynb

en: Juypter Notebook for Data Preparation

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019


data-broedlin-cnp

title_for_slug: data-broedlin-cnp

en: nitrogen stoichiometry phosphorus forest soil drying-rewetting dissolved-organic-matter mineralization carbon

en: Data Broedlin-CNP

en: Data Broedlin-CNP-Release

en: Raw data of C-N-P mobilization experiment from Oi, Oe/Oa, and A horizons of beech forest soils along a nutrient availability gradient.

en: Mircocosm experiment to identify the individual patterns and controls of C, N, and P mobilization in soils under beech forests. Organic and mineral horizons sampled along a nutrient availability gradient in Germany were exposed to either permanent moist conditions or to dry spells in microcosms and quantified the release of inorganic and organic C, N, and P.

dissolved-organic-matter

display_name: dissolved-organic-matter

drying-rewetting

display_name: drying-rewetting

mineralization

display_name: mineralization

nitrogen

display_name: nitrogen

phosphorus

display_name: phosphorus

soil

display_name: soil

stoichiometry

display_name: stoichiometry

education

en: Education and science

en: Data Broedlin CNP


maintainer: Esther R. Frei

en: g-tree forest treeline climate-change swiss-alps

en: climate data G-TREE experiment, Davos, Switzerland

en: GTREE Website

en:
G-TREE is a global research network composed of 40 arctic and alpine researchers from around the world. This summer, our field experiment will be established at numerous sites across Canada, France, Norway, Spain, the United States, and Venezuela. Other sites are being developed in Russia, Scotland, and Sweden.

The Stillberg research area is located in the Eastern Swiss Alps near Davos, Switzerland. The site has been used for several long-term monitoring as well as experimental studies for the last four decades. Our G-TREE experiment consists of a lowest site located in a subalpine Larch-Spruce forest (Larici-Picetum) dominated by Larix decidua and Picea abies (1930 m a.s.l.), a transition zone site dominated by alpine shrubs (2100 m a.s.l.), and an uppermost site in an alpine meadow with some dwarf shrubs (2390 m a.s.l.).

climate-change

display_name: climate-change

forest

display_name: forest

g-tree

display_name: g-tree

swiss-alps

display_name: swiss-alps

treeline

display_name: treeline

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: G-TREE: Global Treeline Range Expansion Experiment Davos, Switzerland


en: precipitation swiss-forest-lab relative-humidity temperature meteorology meteo par climate-change wind-speed long-term

en: Data plot of the field station (LAF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Field station data (LAF)

en: Data file.

en: Site photo of the field station (LAF)

media_type: image/jpeg

en: Site photo of the field station from the side.

mimetype: image/jpeg

en: Site aerial photo (Lausanne)

en: Site aerial photo from both Lausanne stations. Source: Google. 2016. Site aerial photo from both Lausanne stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (LAB)

en: Forest station data (LAB)

en: Site photo of the forest station (LAB)

en: Site photo of the fforest station from the side.

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Lausanne in Switzerland where one station is located within a natural mixed forest stand (LAB) with European beech (_Fagus sylvatica_; 160-170 yrs), European silver fir (_Abies alba_; 160-170 yrs) and Norway spruce (_Picea abies_; 160-170 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, LAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Lausanne is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Lausanne, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


en: rain-on-snow catchment-data snow-hydrology snowpack meteorological-data

en: The file contains all data needed to run simulations with the snow cover model SNOWPACK.

en: Meteorological data used to run SNOWPACK for 58 catchments in the Swiss Alps. The data consists of a 2 km grid of "virtual meteorological stations" for each catchment. It was used to simulate snow cover processes during rain-on-snow events, therefore meteorological data of each catchment contains at least one rain-on-snow event. Further information can be found in the attached readme.txt and in Würzer & Jonas et al. (2017), currently under review in Hydrological Processes.

catchment-data

display_name: catchment-data

meteorological-data

display_name: meteorological-data

rain-on-snow

display_name: rain-on-snow

snow-hydrology

display_name: snow-hydrology

snowpack

display_name: snowpack

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Meteorological data for investigation of rain-on-snow events in 58 catchments in Switzerland


maintainer: Giulia Mazzotti

en: snow-energy-balance snow-distribution forest-snow snow-modelling forest-structure

en: Meteo data to drive FSM2 model

en: Includes meteorological driving data used to run the forest snow model FSM2, processed and parsed in text files that match the format required by FSM2. Separate files are available for each field area (Laret, Drusatscha and Ischlag) and season (2012/13, 2013/14, 2014/15). Each file includes data for the period from October 1st to May 31st at hourly resolution.

en: Snow depth data forest sites

en: Contains all snow depth data acquired at all forest sites during winters 2012/13, 2013714 and 2014/15.

en: Canopy data

en: Includes all canopy structure metrics computed at all surveyed locations

en: Coordinates data

en: Includes coordinate information of each surveyed point (7 x 276 = 1932 forest points, 2 open areas)

en: Snow depth data open sites

en: Contains all snow detph data accquired at open sites nearby the forest stands during the same period.

en: Grid point nomenclature

en: The grid structure of each forest site and the respective nomenclature applied to label individual points within each grid are outlined here.  Each point marks the location of snow depth measurements and co-located canopy structure parameters.

en:
This dataset contains all snow, canopy and meteorological data presented and used in the publication: Mazzotti, G., Essery, R., Moeser, D. & Jonas T. (2020) 'Resolving spatial variability of forest snow using an energy-balance model with a 1-layer canopy'. Water Resources Research, https://doi.org/10.1029/2019WR026129.
This publication must be cited when using this dataset.

forest-snow

display_name: forest-snow

forest-structure

display_name: forest-structure

snow-distribution

display_name: snow-distribution

snow-energy-balance

display_name: snow-energy-balance

snow-modelling

display_name: snow-modelling

en: Snow depth, canopy structure and meterorological datasets from the Davos area, Switzerland, Winters 2012/13-2014/15, used for high-resolution forest snow modelling


maintainer: Anita C. Risch

en: grassland non-native-plant herbivory native-plant weed-management

media_type: XLSX

en: Correction: Data file native and non-native plant interactions in Australian grasslands

en:
taxa tab:	list and overview of all the recorded species

* family:                 family of the plant

* genus:                genus of the plant

* species:                plant species name

* origin:                indicates whether the plant is native to Australia or not (non-native)

* common name:	        common name of the plant species

* functional group:	        functional group of the plant species: forb, graminoid, fern, tree

* functional group detailed:	gives more detail about the type of graminoid and forb: legume, forb (non-leguminous),
                        grass, sedge, rush, fern, tree

* lifeform:                annual or perennial lifeform (species which can have both of these lifeforms where
                        considered as annuals)

plot tab:	list of species found in each plot and their cover (%)

* sampling.session:        provides information about the sampling time:
                        May2020 = data that was collected in May 2020
                        Nov2020 = data that was collected in November 2020

* farm.name:	            name of the farms where the sampling took place:
                        SF = farm of the Southern group
                        NF = farm of the Northern group
                        numbers 1-3 = randomly allocated to the Southern group of farms
                        numbers 4-6 = randomly allocated to the Northern group of farms

* site.type:	                KG: Kangaroo grass dominated site
                        ALG: ALG+KG site (Kangarooo grass and African lovegrass co-dominated site)

* plot.no:                plot number: 9-12

* scientific.name:	        scientific name of the plant species found in a certain plot

* functional group:	        indicates whether the species found is a tree, forb, graminoid or fern

* functional group detailed:	indicates whether the species found is a tree, legume, forb (non-leguminous),
                        grass, sedge, rush, fern

* lifeform:                specifies the lifeform of the species: annual or perennial lifeform
                        (species which can have both of these lifeforms where considered as annuals)

corrections tab:	Detailed description of corrections made in plot.data tab

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Schlierenzauer, C., Risch, A.C., Schütz, M., Firn, J. 2021. Non-native Eragrostis curvula reduces plant species diversity in pastures of South-eastern Australia even when native Themeda triandra remains co-dominant. Plants 10, 596._

Please cite this paper together with the citation for the datafile.

Study area
The study was conducted in the lowland grassy woodlands of the Bega Valley Region, which is located in the south-east corner of New South Wales, Australia. Embedded between the Pacific Ocean and the Australian Alps, the lowland grassy woodlands are mostly located on granitic substrates and reach elevations of roughly 500 m above sea level. Typically, these grassy woodlands receive less precipitation (mean annual precipitation between 700-1100 mm) compared to the more elevated areas that surround them (NSW Government - Office of Environment and Heritage 2017).
The vegetation is dominated by an open tree canopy layer consisting of Eucalyptus tereticornis Sm, Angophora floribunda Sm. (Sweet) and a range of other eucalypt species. Sometimes shrub or small trees are also present, whereas grasses and forbs form the ground-cover. In areas without intensive agricultural history, this layer is dominated by perennial, tussock grasses such as Themeda triandra Forssk, Microlaena stipoides R.Br (Weeping Grass), Eragrostis leptostachya Steud. (Paddock Lovegrass) and Echinopogon ovatus P.Beauv (Forest Hedgehog Grass). The remaining inter-tussock spaces are occupied by a diversity of growth-restricted grasses and herbaceous forbs (NSW - Department of Planing, Industries and Environment 2019; NSW Government - Office of Environment and Heritage 2017).
Clearing, pasture sowing, fertilizer application and livestock grazing resulted in a dramatic decrease in the extent of these natural woodlands, with less than five percent within conservation reserves and overall, with only about 20% of their original extent in New South Wales still existing (Tozer et al. 2010). The remaining areas outside of reserves are threatened by altered fire frequencies, habitat clearing, livestock grazing and especially by non-native plant invasion, particularly Eragrostis curvula (Schrad.) Nees. For this reason, the grassy woodlands are listed as an endangered ecological community in the NSW state legislation. Additionally, they are considered as critically endangered by the Commonwealth of Australia (Threatened Species Scientific Committee (TSSC) 2013).

Experimental design and sampling
The study was conducted on six farms and in each of them two sites were chosen, representing a paired design. One of the sites at each farm is dominated by native Themeda triandra, the other one co-dominated by non-native Eragrostis curvula and Themeda triandra. All farms are within a radius of approximately 10 km from the town Candelo. Three of the farms are located North (36°40’ to 36°42’ S and 149°38’ to 149°42’ E) and three of them are located South (36°51’ to 36°49’ S and 149°38’ to 149°42’ E) of Candelo.
Non-native herbivores (mainly cattle, sheep and rabbits) and native herbivorous marsupials (mainly kangaroos, wallabies and wombats) are present in the area of these sites. On each site, data was collected within four plots (each 1 x 1 m) in May and November 2020. All plant species found within a plot were recorded and their relative abundance was estimated.

References
NSW - Department of Planing, Industries and Environment. 2019. “Lowland Grassy Woodland in the South East Corner Bioregion - Endangered Ecological Community Listing.” https://www.environment.nsw.gov.au/topics/animals-and-plants/threatened-species/nsw-threatened-species-scientific-committee/determinations/final-determinations/2004-2007/lowland-grassy-woodland-south-east-corner-bioregion-endangered-ecological-community-l (February 18, 2021).
NSW Government - Office of Environment and Heritage. 2017. “Lowland Grassy Woodland in the South East Corner Bioregion - Profile.” https://www.environment.nsw.gov.au/threatenedSpeciesApp/profile.aspx?id=20070 (January 31, 2021).
Threatened Species Scientific Committee (TSSC). 2013. Environment Protection and Biodiversity Conservation Act 1999 (EPBC Act) Conservation Advice for Lowland Grassy Woodland in the South East Corner Bioregion. http://www.environment.gov.au/biodiversity/threatened/communities/pubs/82-conservation-advice.pdf.
Tozer, Mark et al. 2010. “Native Vegetation of Southeast NSW: A Revised Classification and Map for the Coast and Eastern Tablelands.” Cunninghamia : a journal of plant ecology for eastern Australia 11(3): 359–406.

grassland

display_name: grassland

herbivory

display_name: herbivory

native-plant

display_name: native-plant

non-native-plant

display_name: non-native-plant

weed-management

display_name: weed-management

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Native and no-native plant interactions in Australian grasslands


maintainer: Océane Hames

en: snow-deposition arctic-sea-ice openfoam mosaic snow-transport

en: MOSAiC Met City preliminary (Level 2) wind data

media_type: zip-compressed folder of csv

en:
Extract from the preliminary MOSAiC atmospheric data (Level 2) for the time period 6th to 13th of November, 2019.
This data was used to set up the fluid forcing parameters in the snowBedFoam simulations on MOSAiC sea ice. It is being published in this repository with the kind permission from Matthew Shupe and his team.
The final processed and quality controlled version of this dataset (Level 3) has not been published yet. A complete reference will be added in this description once it is released.

en: snowBedFoam 1.0.

media_type: .zip

en:
OpenFOAM-2.3.0. scripts containing the implemented Eulerian-Lagrangian snow transport model.

The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en: Paper Draft

media_type: PDF

en: This is the initial draft of the paper where the snowBedFoam 1.0. results are tested against Terrestrial Laser Scan (TLS) measurements of snow dynamics on Arctic sea ice (MOSAiC expedition). It highlights the numerical limitations of our model as well as the measurement uncertainties, which may occur in such extreme environments.

en:
snowBedFoam 1.0. is a snow transport solver implemented in the Computational Fluid Dynamics (CFD) software OpenFOAM. It is adapted from the standard multi-phase flow solver DPMFoam for application in snow-influenced environments.

To simulate aeolian snow transport, snowBedFoam 1.0. handles coupled Eulerian–Lagrangian phases, which involve a finite number of particles (snow) spread in a continuous phase (air). The snow erosion and deposition are modelled through physically-based equations such as the ones employed in the well-established LES-Lagrangian Stochastic Model (Comola and Lehning, 2017 ; Sharma et al., 2018). This modelling approach is computationally intensive and thus adapted to simulate snow movement and distribution on small scale terrain.

snowBedFoam 1.0. was tested against topographical data collected on Arctic sea ice during the MOSAiC expedition (Clemens-Sewall, 2021) . Together with atmospheric data from the MOSAiC Met City (Shupe et al., 2021) used for the fluid forcing, the model was able to accurately simulate the zones of erosion and deposition of snow along a complex ice ridge structure.

The core code of snowBedFoam 1.0. is also accessible on the WSL/SLF GitLab repository (more details in the Resources section).

arctic-sea-ice

display_name: arctic-sea-ice

mosaic

display_name: mosaic

openfoam

display_name: openfoam

snow-deposition

display_name: snow-deposition

snow-transport

display_name: snow-transport

en: snowBedFoam: an OpenFOAM Eulerian-Lagrangian solver for modelling snow transport


snow-depth-mapping

maintainer: Mauro Marty

title_for_slug: snow-depth-mapping

en: dsm aerial-imagery snow-depth snow-hydrology image-matching snow-water-equivalent avalanche

en: Snow depth map 20120320

en: Snow depth map generated from ADS 80 imagery (CIR). GSD of imagery = 0.25 m

en: Snow depth map 20160309

en: Snow depth map 20100416

en: Snow depth map 20130415

en: Snow depth map 20140417

en: Snow depth map generated from ADS 100 imagery (CIR). GSD of imagery = 0.18 m

en: Snow depth map 20160126

en:
Snow depth map generated from ADS 100 imagery (CIR). GSD of imagery = 0.16 m
Because of very diffuse light conditions at time of image acquisition the quality of the resulting snow depth values are in some regions quite poor.

en: Snow depth map 20160420

en: Snow depth map 20150415

en:
The available datasets are snow depth maps with a spatial resolution of 2m generated from image matching of ADS 80/100 data. Image acquisition took place at peak of winter (time when the thickest snowpack is expected). The snow depth maps are the difference of a summer DSM from the winter DSM of the corresponding date . The summer DSM used is a product of image matching of ADS 80 data from summer 2013. In the available products buildings, vegetation and outliers were masked (set to NoData).
For the elimination of buildings the TLM layer (swisstopo) was used, because this layer might not represent exactly the
state of infrastructure at time of image acquisition, it is possible that mainly in dense settlement some buildings were not successfully masked. For the relevant area above treeline the masking of buildings showed good results. Vegetation got masked for a height above ground > 1m and was detected in a combination of summer and winter data sets. As Outliers were considered unrealistic snow depths caused by a failure of the image matching algorithm. Snow depths > 15m and smaller than < -15m were classified as outliers. Negative snow depth were kept, because of an uncertainty in image orientation accuracy. It is expected that in regions with negative snow depth also positive snow depth are underestimated by the same amount, which means that an estimation of snow volume should be carried out summing up the absolute values of snow depth (also the negative ones). For volume estimation in small regions the user has to take into account, that orientation accuracy of the images is roughly around 1-2 GSD (30cm), which propagates directly to the snow depth product. Areas which are not covered by snow got assigned a value of 0 as snow depth.

The work is published in:

Bühler, Y.; Marty, M.; Egli, L.; Veitinger, J.; Jonas, T.; Thee, P.; Ginzler, C., (2015). Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9 (1), 229-243. doi: 10.5194/tc-9-229-2015

aerial-imagery

display_name: aerial-imagery

avalanche

display_name: avalanche

dsm

display_name: dsm

image-matching

display_name: image-matching

snow-depth

display_name: snow-depth

snow-hydrology

display_name: snow-hydrology

snow-water-equivalent

display_name: snow-water-equivalent


maintainer: EnviDat Support

en: pressure-perturbations cces landslide-testsite landslides pore-water tramm

en: TRAMM Ruedlingen data

media_type: application/zip

en: TRAMM project data from the Ruedlingen site (exp 1 + 2). Measured parameters include soil suction, water level, soil volumetric water content, rain intensity, and soil temperature.

en:
A landslide testsite dataset related to pore water pressure perturbations on the stability of unsaturated silty sand slopes leading to the initiation and propagation of the shear deformations and eventual rapid mass movements. This project was initiated and led by the Institute of Geotechnical Engineering (IGT) of the Swiss Federal Institute of Technology (ETH Zurich) and was incorporated in a Swiss national (TRAMM) and a European Union (SafeLand) multidisciplinary research project. Field site: The experimental slope is 7.5 m wide by 35 m long, located in the Swiss lowlands on an east facing slope over-looking the river Rhine, at an altitude of ~ 350 masl. Originally there were forestry covertures of circa 80%, heights of 5-20 m. Shrubs up to 1-5 m high and a free herb layer covered ~ 50% of the surface. The average gradient was determined to be from 38° to 43° with a slightly concave surface. The underlying rock consists mainly of Molasse, which is formed by alternate layers of sea deposits under the Tethys Sea (Seawater Molasse) and land deposits (Freshwater Molasse). Several augured samples, as well as an outcrop of the bedrock about 20 m above the selected field, revealed horizontal layering of fine grained sand- and marlstone at the test site. The sandstone was later proven to be highly permeable and fissured. Grain-size distributions were determined and the soil was classified as medium-low plasticity silty sand. Site instrumentation:Measurements of soil suction, groundwater level, soil volumetric water content, rain intensity and soil temperature were taken and combined with geophysical monitoring using Electrical Resistance Tomography (ERT) and investigations into subsurface flow by means of tracer experiments. Deformations were monitored during the experiment, both on the surface via photogrammetrical methods and within the soil mass, using a flexible probe equipped with strain gauges at different points and two axis inclinometers on the top and acoustic sensors. Instruments were installed mainly in three clusters at depths of 15, 30, 60, 90, 120, and 150 cm below the ground surface over the slope, including jet-fill tensiometers, TDRs, Decagon TDRs, piezometers, soil temperature sensors, deformation probes, earth pressure cells, acoustic sensors and rain gauges. A ring-net barrier (provided by Geobrugg AG) was set up at the foot of the slope to protect the road. Experiments: A sprinkling experiment was carried out in September 2008 to investigate the hydrological and mechanical response of the slope (Experiment 1), followed by a second one to trigger a landslide in March 2009 (Experiment 2).

Publications

1. Lehmann, P., F. Gambazzi, B. Suski, L. Baron, A. Askarinejad, S. M. Springman, K. Holliger, and D. Or (2013), Evolution of soil wetting patterns preceding a hydrologically induced landslide inferred from electrical resistivity survey and point measurements of volumetric water content and pore water pressure, Water Resour. Res., 49, 7992–8004, doi:[10.1002/2013WR014560](http://dx.doi.org/10.1002/2013WR014560).

2. Springman, S. M., Kienzler, P., Casini, F., & Askarinejad, A. (2009). Landslide triggering experiment in a steep forested slope in Switzerland. In 17th International Conference of Soil Mechanics and Geotechnical Engineering, Alexandria, Egypt (pp. 1698-1701). doi: [10.3233/978-1-60750-031-5-1698](http://dx.doi.org/10.3233/978-1-60750-031-5-1698)

cces

display_name: cces

landslide-testsite

display_name: landslide-testsite

landslides

display_name: landslides

pore-water

display_name: pore-water

pressure-perturbations

display_name: pressure-perturbations

tramm

display_name: tramm

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: TRAMM project Ruedlingen experimental landslide dataset, Switzerland


maintainer: Matthias Haeni

en: par climate-change long-term swiss-forest-lab meteo wind-speed relative-humidity temperature meteorology precipitation

en: Site photo of the field station (VSF)

en: Site photo of the field station from the side.

en: Site aerial photo (Visp)

en: Site aerial photo from both Visp stations. Source: Google. 2016. Site aerial photo from both Visp stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the field station (VSF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the forest station (VSB)

en: Site photo of the forest station (VSB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Field station data (VSF)

media_type: text/csv

en: Data file.

en: Forest station data (VSB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Visp in Switzerland where one station is located within a natural mixed forest stand (VSB) with Scots pine (_Pinus sylvestris_; 40-80 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, VSF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Visp is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Visp, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Sebastian Schlögl

en: atmospheric-turbulence turbulent-sensible-heat-fluxes snow atmosphere stable-boundary-layer

en: Turbulence data WFJ07

en: lower sensor

en: Turbulence data AA00

en: sensor in 25 m height

en: Turbulence data GR00

en: sensor in 1 m height

en: Turbulence data PM07

en: NWW

en: Turbulence data WFJ11

en: upper sensor

en: sensor in 2 m height

en: sensor in 0.2 m height

en: SEE

en:
We used five different atmospheric turbulence datasets from four test sites, with these sites showing differences in their topographical characteristics. We chose one typical alpine test site with high topographical complexity (Weissfluhjoch, Davos, Switzerland) and three test sites consisting of one glacier site (Plaine Morte, Crans-Montana, Switzerland) and two polar sites (Greenland and Antarctica) representing a quasi-ideal site with homogeneous surface and quasi infinite fetch in all directions.
The turbulent sensible heat flux was calculated using the eddy-covariance method. Note that the sonic temperature fluctuations have been converted into virtual temperature fluctuations.
Three-dimensional wind velocity and air temperature were processed using a linear detrending (Rannik and Vesala, 1999) and a planar fit approach (Massmann and Lee, 2002) to rotate the coordinate system. Air temperature, relative humidity and air pressure from weather stations were used to calculate air properties, which are required for the data processing. The weather stations are located in the immediate vicinity of the turbulence tower and are affected by the same air masses. Turbulence data were averaged to 30-min intervals, whilst changing to a 15-min time interval marginally affects the heat fluxes at the Weissfluhjoch test site (Mott et al., 2011). Note that we define a negative sensible heat flux as being directed towards the snow surface and a positive sensible heat flux as being directed upwards.
The selected datasets and corresponding test sites are briefly introduced below:

Weissfluhjoch 2007 (WFJ07): A vertical set-up of two three-dimensional ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) was used at the traditional field site Weissfluhjoch (2540 m asl.) to measure three-dimensional wind velocity and air temperature at a frequency of 20 Hz. The sensors were mounted 3 m and 5 m above the ground and provided reliable data for 50 days between 11 February 2007 and 24 April 2007. Further information on the field campaign can be found in Stössel et al. (2010) and Mott et al. (2011).

Weissfluhjoch 2011-13 (WFJ11): Three-dimensional wind velocity and air temperature were recorded at 5 m above the ground at a frequency of 10 Hz with a three-dimensional ultrasonic anemometer (CSAT3). The analysis was conducted for data obtained between February and March in the years 2011-13.

Plaine Morte 2007 (PM07): Two three-dimensional ultrasonic anemometers (CSAT3) were installed on a horizontal boom facing opposite directions (west-north-west vs. east-south-east) at 3.75 m above the ground to measure air temperature and three-dimensional wind velocity at 20 Hz. The data were collected at the almost flat field site on the Plaine Morte glacier (2750 m asl.) near Crans-Montana, Switzerland from February to April 2007. High quality meteorological data were additionally recorded and used to force the model. A detailed description about the set-up at the Plaine Morte glacier can be found in Huwald et al. (2009) and Bou-Zeid et al. (2010).

Greenland 2000 (GR00): High-frequency three-dimensional ultrasonic anemometer measurements (CSAT3) were recorded at 50 Hz at the Summit Camp (72.3 °N, 38.8 °W, 3208 m asl.) located on the northern dome of the Greenland ice sheet. Data were collected at 1 m and 2 m above the snow surface during summer in 2000 and 2001. Additionally, meteorological measurements were obtained for the post processing and used to force the model. More information about the field campaign can be found in Cullen et al. (2007, 2014).

Antarctica 2000 (AA00): A set-up of three vertical three-dimensional ultrasonic anemometers (DA-600, Kaijo Denki) were installed at Mizuho Station (70°42' S, 44°20' E, 2230 m asl.) in Eastern Antarctica at 0.2, 1 and 25 m and recorded turbulence data at a frequency of 100 Hz from October to November 2000. Longwave and shortwave radiation, relative humidity, air and snow surface temperature were additionally measured and used to force the model. More information about the field campaign can be found in Nishimura and Nemoto (2005).

atmosphere

display_name: atmosphere

atmospheric-turbulence

display_name: atmospheric-turbulence

snow

display_name: snow

stable-boundary-layer

display_name: stable-boundary-layer

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

education

en: Education and science

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: How do stability corrections perform in the stable boundary layer over snow?