maintainer: Esther R. Frei

en: climate-change g-tree forest swiss-alps treeline

en: GTREE Website

en: climate data G-TREE experiment, Davos, Switzerland

en:
G-TREE is a global research network composed of 40 arctic and alpine researchers from around the world. This summer, our field experiment will be established at numerous sites across Canada, France, Norway, Spain, the United States, and Venezuela. Other sites are being developed in Russia, Scotland, and Sweden.

The Stillberg research area is located in the Eastern Swiss Alps near Davos, Switzerland. The site has been used for several long-term monitoring as well as experimental studies for the last four decades. Our G-TREE experiment consists of a lowest site located in a subalpine Larch-Spruce forest (Larici-Picetum) dominated by Larix decidua and Picea abies (1930 m a.s.l.), a transition zone site dominated by alpine shrubs (2100 m a.s.l.), and an uppermost site in an alpine meadow with some dwarf shrubs (2390 m a.s.l.).

climate-change

display_name: climate-change

forest

display_name: forest

g-tree

display_name: g-tree

swiss-alps

display_name: swiss-alps

treeline

display_name: treeline

en: G-TREE: Global Treeline Range Expansion Experiment Davos, Switzerland


maintainer: Frank Techel

en: snow avalanches alps shapefile observations

state: active

type: dataset

en: Selected wet snow avalanche activity data Davos, Switzerland (2011-2014)

media_type: application/zip

en: Zip archive with shapefiles for the selected wet snow avalanche polygons, including metadata.

format: ZIP

mimetype: application/zip

en:
Polygons of wet snow avalanches in the Davos area, as documented by the Swiss avalanche warning service. The georeferenced outlines of the avalanches contain both the release as well as the deposit area, but without separating between both.

The dataset is a subset of the total record of 1615 avalanches classified as wet snow avalanches from October 2011 - September 2014, containing those 255 avalanches exceeding 0.0125 km^2. Every polygon comes with meta data, including the date of occurrence.

This dataset is the underlying dataset to:
Wever, N., Vera Valero, C. and Techel, F. (2018) _Coupled snow cover and avalanche dynamics simulations to evaluate wet snow avalanche activity_. Submitted to J. Geophys. Res., in review.

alps

display_name: alps

avalanches

display_name: avalanches

observations

display_name: observations

shapefile

display_name: shapefile

snow

display_name: snow

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester


en: microct intercomparison snow icecube specific-surface-area

en: TARTES simulations

media_type: ipynb

en: Jupyter notebook with TARTES simulations.

format: SERVICE

en: Statistics of samples

media_type: XLSX

format: XLS

en: IceCube and MicroCT data

en: Grain survey of snow particles

en: tbd

en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

specific-surface-area

display_name: specific-surface-area


maintainer: EnviDat Support

en: jupyter density geospatial buffer roads gis

en: Plots

en: Random plot locations

en: Road data from OSM for the surroundings of Menzberg, Switzerland

en: Road Density Calculation (Python Notebook) online

media_type: url

en:
This dataset contains the road and plot data used for the geospatial analysis example showcased in "Fostering Open Science at WSL with the EnviDat Environmental Data Portal", a contribution to the 5th Open Source Geospatial Research and Education Symposium (OGRS), 2018.
The example uses Jupyter Notebook to calculate road densities in the neighbourhood of sample plot locations with Python. Road data were extracted from OpenStreetMap, while the point data (sample plots) were generated manually.

buffer

display_name: buffer

density

display_name: density

geospatial

display_name: geospatial

gis

display_name: gis

jupyter

display_name: jupyter

roads

display_name: roads

en: Dataset for OGRS 2018 publication


en: snow-density snow-ice-temperature snow-stratigraphy weisfluhjoch snow-water-equivalent

en: README

media_type: TXT

en: README file giving use metadata.

format: TXT

en: WFJ Snow Profiles 1999-2014

en:
Biweekly manual snow profiles from Weissfluhjoch, Davos, Switzerland.
Version: 2015-09-14T16:25

en: Dataset of manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland. Typical snow profile measurements and observations are included (temperature, density, grain size, grain type, hardness, wetness), following the guidelines of the The International Classification for Seasonal Snow on the Ground (ICSSG) [Fierz, C., Armstrong, R.L., Durand, Y., Etchevers, P., Greene, E., McClung, D.M., Nishimura, K., Satyawali, P.K. and Sokratov, S.A. 2009. The International Classification for Seasonal Snow on the Ground. IHP-VII Technical Documents in Hydrology N°83, IACS Contribution N°1, UNESCO-IHP, Paris].

snow-density

display_name: snow-density

snow-ice-temperature

display_name: snow-ice-temperature

snow-stratigraphy

display_name: snow-stratigraphy

snow-water-equivalent

display_name: snow-water-equivalent

weisfluhjoch

display_name: weisfluhjoch

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland


en: land-use-transformations land-use-simulations digital-zoning-plans land-use-change spatial-planning

media_type: ascii x, y, z

en: Legend simulated maps

en:
Table of Content: 1. General context of the data set "LUSzoning”; 2. Background and aims of the study using the data set LUSzoning; 3. The data set LUSzoning.
1. General context of the data set "LUSzoning".
The data set "LUSzoning" stands for Land-use simulations integrating zoning regulations in Spanish functional urban areas. The data set has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2021. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, digital zoning plans) into quantitative land-change modelling approaches at the urban regional level.
2.	Background and aims of the study using the data set “LUSzoning”.
As part of the CONCUR project, a specific task was to integrate planning spatial policies in land-change modelling. Planning can be implemented in modelling using either hard or gradual restrictions. Different studies have addressed the inclusion of spatial planning policies in land-use change modelling. However, the integration of zoning constraints is generally established as hard or Boolean-based restrictions (e.g., whether urban development is allowed or not), while not accounting for the spatial heterogeneity or gradual characteristics within planning zones (e.g., whether planning regulations allow low, medium or high urban density), though these could improve real patterns simulations in urban areas. We assume Spanish General Zoning plans were suitable to explore the integration of planning into land-change modelling as soft constrains because they define land-use intensities in the buildable zoning areas. In light of the above considerations, the overall aim of the study was to model urban land-use changes using a multi-scenario approach that integrates digitized zoning plans for the Functional Urban Areas (FUAs) of Madrid, Barcelona, Valencia, and Zaragoza. The following specific objectives were addressed: i) to analyse the role of planning by defining three future scenarios that integrate digitized zoning plans and one scenario that assumes almost no planning intervention; ii) to introduce zoning constraints that reflect different degrees of urban densities; iii) to generate a transferable spatially-explicit modelling framework to integrate planning into land-use change simulations.
Four future land-use demands scenarios were defined for the FUAs. Storylines were created considering probable development scenarios related to zoning plans, current Spanish legislation and sustainability goals defined along two axes: a high market-oriented vs. high planning-intervention axis, and an axis of short-term economic growth vs. long-term sustainable growth. The sustainable development scenario (S1) is characterized by low gross floor area (GFA) growth that is limited to areas that are currently under development according to zoning plans. The business-as-usual scenario (S2) is characterized by medium GFA growth in the range of on-going trends. The strong development scenario (S3) is characterized by high GFA growth rates. Growth is restricted to buildable areas without urbanization project designated in zoning plans. The unrestricted development scenario (S4) prioritizes a high degree of market liberalization characterized by high GFA growth that surpasses population demands. S4 follows a rapid economic growth pattern with almost no planning intervention.
3.	 The data set “LUSzoning”.
The dataset includes 16 .asc raster layers providing the simulated land-uses under four defined scenarios for Barcelona, Madrid, Valencia and Zaragoza Functional Urban Areas (FUAs) for 2030. The simulated raster layers were created using CLUMondo simulation framework and have a spatial resolution of 30m. The .asc layers name include the name of the FUA and scenario number. For example, the output from simulating the urban growth for the city of Zaragoza under Scenario 2 is named “Zaragoza_S2.tif”. Furthermore, a .txt file named “Legend.txt” includes the numeric value of the land-use and the category of land-use that represents to interpret the .asc raster layers. The name of the land-use classes is a reclassification of the Urban Atlas 2012 land-use classes within the four Spanish FUAs analyzed.

digital-zoning-plans

display_name: digital-zoning-plans

land-use-change

display_name: land-use-change

land-use-simulations

display_name: land-use-simulations

land-use-transformations

display_name: land-use-transformations

spatial-planning

display_name: spatial-planning

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: LUSzoning: Land-use simulations integrating zoning regulations in Spanish functional urban areas


maintainer: Maria Elvira Murazzi

en: uptake 13c-labelling forest-trees nanoplastic polystyrene

en: Nanoplastic in forests experiment

media_type: XLS

en:
Data embargoed until August 2022, and it will be provided upon request

-  excel file containing: two working sheets (leaf supply and root supply experiment) with a table with the values 13C-nanopolystyrene in the different tissues of the two forest tree species; graph showing the differences between controls and treatments of 13C-nanopolystyrene enrichment for each tissue of each forest tree species; ANOVA table showing significant values after having exposed the tree species to 13C-nanopolystyrene

en:
The fate of plastic in the environment is of global concern, because its production recently has
increased strongly and it accumulates in terrestrial and aquatic ecosystems. Although some knowledge on
its role in aquatic and terrestrial ecosystems was gained in the recent decade, hitherto very little is known
about the impact of micro and nanoplastics in forest ecosystems.

The aim of this pioneering project was to explore if nanoplastics are taken up by forest trees species
through leaves or roots. In greenhouse experiments, we exposed leaves or roots of seedling of two forest
trees species to solutions with highly 13C-labelled polystyrene nanoparticles (13C-nPS, 99 atom%) and
examined if they were incorporated in different above- and belowground tissues.

Treated part of the trees for both species showed significant 13C-enrichment, indicating that trees take up nanoparticles. However, the overall 13C signal strength in tissues that were not exposed to the 13C label remained low (Δδ13C<1‰) and was confined to a few seedlings, leaving it ambiguous whether nanoplastic transport occurs or not.

We acknowledge that the new method developed might be not sensitive enough to unequivocally detect
mechanisms of nanoplastic uptake and transport at environmentally realistic concentrations.

forest-trees

display_name: forest-trees

nanoplastic

display_name: nanoplastic

polystyrene

display_name: polystyrene

uptake

display_name: uptake

en: Nanoplastics in forests: Exploring the effects of nanoplastics on forest soils and tree physiology (NanoPlast)


en: turbulence blowing-snow micro-rain-radar drifting-snow large-eddy-simulations meteorological-data antarctica eddy-covariance-measurements mass-flux

media_type: zip-compressed folder of text files (f90)

en: Source code of the large-eddy simulations coupled with a Lagrangian stochastic model (LES-LSM), available on GitLab.

en: Measurement data from micro-meteorological station

media_type: zip-compressed folder of ASCII files

en: Automatic in-situ measurements of micro-meteorology and snow transport

en: Measurement data from snow particle counter at MRR site

media_type: zip-compressed folder of csv

en: Near-surface observations of drifting snow from a Snow Particle Counter (SPC) installed at the location of the Micro Rain Radar.

en: Readme

en: Meta data

en: Measurement data from Micro Rain Radar (MRR)

media_type: NetCDF

en: Remote sensing data of blowing snow from a Micro Rain Radar (MRR).

en: Simulation data for a situation with negligible snow transport

en: Results from two LES-LSM simulations called NoDrift_1 and NoDrift_2, which reproduce the conditions observed at the S17 site on 12th January 2019, 05:40 to 05:50 UTC.

en: Simulation data for a situation with significant snow transport

en: Data from two LES-LSM simulations called Drift_1 and Drift_2, which reproduce the conditions observed at the S17 site on 11th January 2019, 00:40 to 00:50 UTC.

en:
This dataset contains measurement and simulation data. The measurements characterize the standard meteorology, turbulence, and snow transport at the S17 site near Syowa Station in East Antarctica during an expedition in austral summer 2018/2019. Large-eddy simulations with sublimating particles provide additional insight into the latent and sensible heat exchange between snow and air in two example situations observed at the S17 site.

A part of the measurement data was recorded by an automatic measurement station from 10th January 2019 to 26th January 2019. This measurement station was equipped with standard meteorological sensors, a three-dimensional ultrasonic anemometer, an open-path infrared gas analyzer, a snow particle counter, an infrared radiometer for measurements of the surface temperature, and a sonic ranging sensor measuring changes in snow surface elevation.

At a horizontal distance of approximately 500 m, a Micro Rain Radar (MRR) was installed in a tilted configuration with an elevation angle of 7° for remote sensing of blowing snow between 25th December 2018 and 24th January 2019. In addition, near-surface in-situ measurements of snow transport were performed at the location of the MRR by deploying a snow particle counter from 27th December 2018 to 24th January 2019.

The simulations cover a 18 x 18 x 6 m³ domain and reproduce the steady-state conditions during a 10-min interval with significant snow transport and another 10-min interval with negligible snow transport. We provide the model source code and the post-processed simulation data, i.e., horizontally averaged quantities as a function of height and time.

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

drifting-snow

display_name: drifting-snow

eddy-covariance-measurements

display_name: eddy-covariance-measurements

large-eddy-simulations

display_name: large-eddy-simulations

mass-flux

display_name: mass-flux

meteorological-data

display_name: meteorological-data

micro-rain-radar

display_name: micro-rain-radar

turbulence

display_name: turbulence

en: Meteorology and snow transport at S17 near Syowa, Antarctica, in austral summer 2018/2019


weissfluhjoch-dataset-for-esm-snowmip

maintainer: Nander Wever

title_for_slug: weissfluhjoch-dataset-for-esm-snowmip

en: snow weissfluhjoch snow-depth esm-snowmip snow-models

en: Dataset Weissfluhjoch for ESM-SnowMIP

en: Conversion script

media_type: text/x-sh

en:
Use this script to convert WFJ_optimaldataset_v6.smet to wfj.smet, the file that is used for the ESM-SnowMIP project. It also requires the file: WFJ_AirPressure_Data.zip

Use: bash create_wfj_dataset.sh > input/wfj.smet

mimetype: text/x-sh

en: ini file

en: This ini file is required by data-converter from MeteoIO version 1887 (http://models.slf.ch/p/meteoio/)

en: This Weissfluhjoch dataset is a processed version of the Weissfluhjoch dataset version 6 from https://doi.org/10.16904/6. This dataset was specially created for the ESM-SnowMIP project. Here it is documented how this dataset has been created.

esm-snowmip

display_name: esm-snowmip

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-models

display_name: snow-models

weissfluhjoch

display_name: weissfluhjoch

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Weissfluhjoch dataset for ESM-SnowMIP


en: 18o advection stable-water-isotope snow metamorphism

en: Read-me

media_type: text/plain

en: A short description of the data contained in the zipped-file. Recommended for reading before downloading the dataset.

mimetype: text/plain

en: Data files and read-me

en: raw data and micro-CT data available from contacts

en:
Stable water isotopes (δ18O) obtained from snow and ice samples of polar regions are used to reconstruct past climate variability, but heat and mass transport processes can affect the isotopic composition. Here we present an experimental study on the effect on the snow isotopic composition by airflow through a snow pack in controlled laboratory conditions. The influence of isothermal and controlled temperature gradient conditions on the δ18O content in the snow and interstitial water vapor is elucidated. The observed disequilibrium between snow and vapor isotopes led to exchange of isotopes between snow and vapor under non-equilibrium processes, significantly changing the δ18O content of the snow. The type of metamorphism of the snow had a significant influence on this process.
Ebner, P. P., Steen-Larsen, H. C., Stenni, B., Schneebeli, M., and Steinfeld, A.: Experimental observation of transient δ18O interaction between snow and advective airflow under various temperature gradient conditions, The Cryosphere Discuss., https://doi.org/10.5194/tc-2017-16, accepted, 2017.

advection

display_name: advection

metamorphism

display_name: metamorphism

stable-water-isotope

display_name: stable-water-isotope

en: Experiments on stable water isotopes,  snow metamorphism, and advection


aerosol-data-weissfluhjoch

title_for_slug: aerosol-data-weissfluhjoch

en: particles linda inp ice-nucleation raclets aerosol

en: OPC-GT526S Dataset Weissfluhjoch

media_type: text/csv

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

format: CSV

mimetype: text/csv

en: LINDA Dataset Weissfluhjoch

en: The LINDA file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en: APS Dataset Weissfluhjoch

media_type: application/x-netcdf

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Weissfluhjoch.

mimetype: application/x-netcdf

en: OPC-N3 Dataset Weissfluhjoch

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: SMPS Dataset Weissfluhjoch

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity) in a temporal resolution of 2 minutes, with time in UTC, measured at Weissfluhjoch.

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Weissfluhjoch (LON: 9.806475, LAT: 46.832964). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs), and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (SMPS 3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3787 TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and LINDA: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l min‾¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the LED based Ice Nucleation Detection Apparatus (LINDA, University of Basel) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

linda

display_name: linda

particles

display_name: particles

raclets

display_name: raclets

en: Aerosol Data Weissfluhjoch


en: runoff streamflow alptal stable-water-isotopes groundwater

en: Deuterium groundwater and baseflow October 2017

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

Date: Date (year-month-day)
Location: Well number or outlet
X: X coordinate (CH1903 LV03)
Y: Y coordinate (CH1903 LV03)
riparian: riparian wells (i.e. from the riparian-like cluster as presented in Kiewiet et al. (2019)) are marked a one, all other wells are marked a zero
d.D (per mil): Deuterium composition (per mil)

en: Precipitation and discharge event A

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
With any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date (year-month-day) and time (hours:minutes:seconds) in UTC
Q: Discharge in mm per hour at catchment outlet (697234,210472)
P: Rainfall in mm per hour averaged for two rain gauges (697494,210675) and (698004, 210680)

en: Deuterium rainfall event C

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date (year-month-day) and time (hours:minutes:seconds) in UTC
P d.D: Deuterium composition of the rainfall samples (per mil)
X: X coordinate (CH1903 LV03)
Y: Y coordinate (CH1903 LV03)

en: Deuterium rainfall event B

en: Precipitation and discharge extra event

en: Deuterium streamwater event A

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date and time of sample collection (UTC; year-month-day, hours:minutes)
Q d.D: Deuterium composition (per mil) of streamwater sampled at the catchment outlet (697234,210472); the first sample is used as pre-event streamflow sample

en: Precipitation and discharge event C

en: Deuterium rainfall event A

en: Deuterium streamwater event B

en: Deuterium streamwater event C

en: Deuterium groundwater and baseflow October 2016

en: Deuterium groundwater and baseflow August 2017

en: Precipitation and discharge event B

en: Deuterium streamwater extra event

en: Deuterium rainfall extra event

en:
This dataset includes discharge and rainfall measurements and deuterium compositions of streamflow, rainfall and groundwater, for four rainfall events and three baseflow snapshot campaigns in the Studibach (Alptal, Switzerland). More specifically, we present the following data:

- Specific discharge at the catchment outlet at 5-minute resolution (mm per hour);
- Rainfall at 5-minute resolution (mm per hour);
- Rainfall deuterium composition (‰);
- Stormflow deuterium composition (‰);
- Groundwater and baseflow deuterium compositions (‰).

For the files containing rainfall and discharge timeseries (QP), and rainfall and streamwater deuterium compositions ("Deuterium_Rainfall" and "Deuterium_Streamwater"), we added the corresponding event identifier (A, B, C or extra) to the file names. For the files containing the groundwater and baseflow deuterium values ("Deuterium_Snapshot") we added the sample collection date to the file name. We included the X and Y coordinates for each data point (coordinate system: CH1903 LV3) as well as the date and time (UTC).

More information on the data collection and preparation can be found in Kiewiet et al. (in review). A detailed description of the baseflow snapshot campaigns can also be found in Kiewiet et al., 2019.

alptal

display_name: alptal

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Discharge, rainfall, and deuterium compositions of streamwater, rainwater and groundwater, for four rainfall events in the Studibach, Alptal, Switzerland


en: snow-avalanche snow-mechanics fiber-bundle-model viscous-deformation snow snow-failure acoustic-emissions sintering

en: fiber-bundle-model-for-snow-failure

en: Data underlying Figures in publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted to "Geophysical Research Letters"

en:
This dataset contains modeled and experimental results for laboratory snow failure experiments and the concurrent acoustic emissions signatures for different loading rates. For modelling the snow failure we used a fiber bundle model that includes sintering and viscous deformation.

The data underlay the figures in the publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted for publication to "Geophysical Research Letters".

acoustic-emissions

display_name: acoustic-emissions

fiber-bundle-model

display_name: fiber-bundle-model

sintering

display_name: sintering

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-mechanics

display_name: snow-mechanics

viscous-deformation

display_name: viscous-deformation

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Fiber Bundle Model for snow failure and concurrent Acoustic Emissions


maintainer: Stephan Zimmermann

en: biogeochemical-cycling magnesium fagus-orientalis-lipsky calcium potassium

en: Concentrations of Ca, Mg, K, and Na in throughfall, litterflow and soil solution of a Hyrcanian forst in Northern Iran

en:
Throughfall, litterflow and soil solution were sampled during one whole year under five Oriental beech trees in a mixed Hyrcanian beech forest. The amounts of Ca2+, Mg2+, K+ and Na+ in these fluxes were calculated based on their concentrations and the sampled volumes, and subsequently compared with the respective fluxes in the rainfall and soil solution of an adjacent forest gap.
In addition six soil profiles, one close to every single tree and one in the forest gap, were analyzed for pH, CaCO3, organic matter and texture.

biogeochemical-cycling

display_name: biogeochemical-cycling

calcium

display_name: calcium

fagus-orientalis-lipsky

display_name: fagus-orientalis-lipsky

magnesium

display_name: magnesium

potassium

display_name: potassium

en: Base cation dynamics in an Oriental beech forest


en: detritus wolf carrion decomposition soil-biodiversity yellowstone biogeochemical-cycling carcass bacteria fungi

en:
Site	ID for different carcasses across the Yellowstone Landscape
Location	Sampling location, either under carcass or control plot
Species	Indicating whether carcass was from bison or elk
Gender	Gener of carcass; F = female, M = male, ? = unknown
Lat	Latitude
Long	Longitude
DSK	Days since kill; in days
Soil.N	Soil N concentration (%)
Soil.C	Soil C concentration (%)
Veg.C	Vegetation C concentration (%); dominant grasses sampled
Veg.N	Vegetation N concentration (%); dominant grasses sampled
Veg.CtoN	Vegetation C to N ratio; dominant grasses sampled
Soil.resp	Soil respiration (g m-2 h-1)
soil.temp	Soil temperature (°C)
Soil.moist	Soil moisture (volumentric; %)
CRR	Cotton rotting rate
bacteria.richness	Bacteria richness
bacteria.diversity	Bacteria diverstiy
fungi.richness	Fungi richness
fungi.diversity	Fungi diversity
bacteria.abundance	Bacteria abundance
fungi.abundance	Fungi abundance

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch, A.C., Frossard, A., Schütz, M., Frey, B., Morris, A.W., Bump, J.K. (accepted) Effects of elk and bison carcasses on soil microbial communities and ecosystem functions in Yellowstone, USA. (accepted). Functional Ecology
doi: ...

Methods
Study area and study sites
This study was conducted in YNP’s Northern Range (NR), located in north-western Wyoming and south-western Montana, USA (~44.9163° N, 110.4169° W). The NR expands over ~1000 km2 and features long cold winters and short dry summers. Grasslands and shrublands dominate the NR that is the home of large migratory herds of bison (winter counts 2017: ~3919 individuals; Geremia, Wallen, & White, 2017) and elk (~5349 individuals) as well as their main predators, approximately five packs of wolves with a total of 33 individuals (Smith et al., 2017). As part of a long-term research program within YNP, wolf predation has been studied since their reintroduction in 1995.
For our study, we received ground-truthed coordinates of bison and elk carcasses from winter 2016/17 (November 2016 through April 2017) from the YNP Wolf Project. Between June 20 and July 1, 2017, we visited 24 carcasses in total. At five sites, we could not sample as the carcasses were no longer found. In total we located remains (hairmats, rumen content, bones, teeth) of 19 adult male and female carcasses (7 bison, 12 elk; Supplementary Table 1). Live body weights of adult bison and elk are approximately 730 kg (male bison), 450 kg (female bison), 330 kg (male elk), and 235 kg (female elk, Meagher, 1973; Quimby & Johnson, 1951).
The kills and subsequent consumption happened between 34 and 173 days prior to our sampling (hereafter “days since kill”, DSK), for which we accounted in our statistics. Note that wolves and other scavengers consumed the soft tissue of the carcasses quickly, hence, there is close to no soft tissue left for decomposition as compared to an intact body left on the soil surface. The 19 carcass sites covered the extent of YNP’s NR, with both bison and elk carcasses showing similar distributions; elevation ranged from 1703 to 2884 m a.s.l. (Supplementary Fig 1 & Supplementary Table 1). The carcasses were all located in grassland or sage-brush shrubland, with or without sparsely scattered trees, and both bison and elk carcasses showed the same distribution of DSK. At each study site, we selected a reference plot (hereafter “control”) that was of comparable size, slope aspect and vegetation to the carcass location (hereafter “carcass”). The control was at least 10 m away (Danell, Berteaux, & Brathen, 2002; Melis et al., 2007) from the carcass itself to ensure the absence of potential direct and indirect carcass effects (paired design; (Bump, Webster, et al., 2009; Bump, Peterson, et al., 2009).

Ecosystem functions and soil properties
We randomly collected 50 g of mineral soil from three locations on both control and carcass plots to a depth of 5 cm with sterile techniques and gently mixed the material to obtain a composite sample. Half the soil sample was immediately bagged in plastic bags (whirl packs), stored in a cooler with ice packs (~5 ºC), sieved (2-mm) and frozen within 4-6 hours of collection to assess soil microbial communities. For this purpose, we extracted total genomic DNA from 0.5 g soil using the PowerSoil DNA Isolation Kit (Qiagen, Hilden, Germany). DNA concentrations were measured using PicoGreen (Molecular Probes, Eugene, OR, USA). PCR amplifications of partial bacterial small-subunit ribosomal RNA genes (region V3–V4 of 16S rRNA) and fungal ribosomal internal transcribed spacers (region ITS2) were performed as described previously (Frey et al., 2016). Each sample consisting of 40 ng DNA was amplified in triplicate and pooled before purification with Agencourt AMPure XP beads (Beckman Colter, Berea, CA, USA) and quantified with the Qubit 2.0 fluorometric system (Life Technologies, Paisley, UK). Amplicons were sent to the Genome Quebec Innovation Center (Montreal, Canada) for barcoding using the Fluidigm Access Array technology and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, CA, USA).
Quality control of bacterial and fungal reads was performed using a customized pipeline (Supplementary Table 2; Frey et al., 2016). Paired-ends reads were matched with USEARCH (Edgar & Flyvbjerg, 2015), substitution errors were corrected using Bayeshammer (Nikolenko, Korobeynikov, & Alekseyev, 2013) and PCR primers were trimmed (allowing for 1 mismatch, read length >300 bp for 16S and >200 bp for ITS primers) using Cutadapt (M. Martin, 2011). Sequences were dereplicated and singleton reads removed prior to clustering into operational taxonomic units (OTUs) at 97% identity using USEARCH (Edgar, 2013). The remaining centroid sequences were tested for the presence of ribosomal signatures using Metaxa2 (Bengtsson-Palme et al., 2015) or ITSx (Bengtsson-Palme et al., 2013). Taxonomic assignments of the OTUs were obtained using Bayesian classifier (Wang, Garrity, Tiedje, & Cole, 2007) with a minimum bootstrap support of 60% implemented in mothur (Schloss et al., 2009) by querying the bacterial and fungal reads against the SILVA Release 128 (Quast et al., 2013) and UNITE 8.0 (Abarenkov et al., 2010) reference databases for 16S and ITS OTUs, respectively.
Abundances of the bacterial 16S rRNA gene and fungal ITS amplicon were determined by quantitative real-time PCR (qPCR) on an ABI7500 Fast Real-Time PCR system (Applied Biosystems, Foster City, CA, USA) as described previously (Frossard et al., 2018). The same primers (without barcodes) and cycling conditions as for the sequencing approach were used for the 16S and ITS qPCR. Three standard curves per target region were obtained using tenfold serial dilutions of plasmids generated from cloned targets (Frey, Niklaus, Kremer, Lüscher, & Zimmermann, 2011). Data were converted to represent mean copy number of targets per gram of soil (dry weight).
The other half of the soil sample was bagged in paper, dried to constant weight at 60°C, passed through a 2 mm sieve and analyzed for total C and N concentration with a CE Instruments NC 2100 soil analyzer (CE Elantech Inc., Lakewood NJ, USA). We also collected 20 mature and undamaged leaves of the dominant grass species growing on control and carcass sites, but taxa were not recorded. The plant material was dried at 60°C, finely ground till homogenized and also analyzed to obtain total C and N concentrations. Soil temperature (10 cm depth) was measured with a waterproof digital thermometer (Barnstead International, Dubuque IA, USA) at three locations each at the control and carcass site. Soil moisture (0 – 10 cm depth) was measured with time domain reflectometry (Field-Scout TDR-100; Spectrum Technologies, Plainfield IL, USA) at five randomly chosen points on control and carcass sites. We measured soil respiration at five randomly chosen points at both control and carcass sites with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA). For each measurement the soil chamber (15 cm high; 10 cm diameter) was tightly placed on the soil surface, after clipping plants to avoid measuring plant respiration or photosynthesis. Measurements were conducted over 120 s.
In addition, we assessed the decomposition rates of standardized OM using the cotton strip assay (Latter & Howson, 1977; Latter & Walton, 1988). Cotton cloth tensile strength loss (CTSL) is a measure of decomposition, and an index to express the combined effect of soil microclimatic, physical, chemical and biological properties on decomposition while accounting for OM quality (Latter & Walton, 1988; Risch, Jurgensen, & Frank, 2007; Withington & Sanford Jr., 2007). We placed five 20 cm wide x 13 cm long sheets of 100% unbleached cotton cloth (American Type SM 1/18’’, Warp: 34/1, Weft: 20/1, Weave plain, 29.5 picks/cm warp, 22 picks/cm weft, 237 g/m2; Daniel Jenny & Co., Switzerland;) at each carcass and control site vertically into the soil by making slits with a flat spade to a depth of 12 cm. We inserted each cloth with the spade, and then pushed the slit closed to assure tight contact with the soil. The cloths were retrieved after 18 to 27 days. After retrieval, the cloths were air-dried, remaining soil gently removed by hand, and 1.5 cm wide strips were cut at the 3.5-5.0 cm (top) and the 9-10.5 cm (bottom) soil depth. The strips were equilibrated at 50 % relative humidity and 20°C for 48 hours (climate chamber) prior to strength testing (Scanpro Awetron TH-1 tensile strength tester; AB Lorentzen and Wettre, Kista, Sweden). Cotton rotting rate (CRR) = (CTScontrol - CTSfinal/CTSfinal)1/3 * (365/t), where CTScontrol is the cotton tensile strength of a control cloth and CTSfinal the cotton tensile strength of the incubated sample, t is the incubation period in days. Control cloths were inserted into the ground and immediately retrieved to account for tensile strength loss associated with cloth insertion. We averaged the CRR of top and bottom strips for further analyses as no difference was found between the two. All sampling and cloth insertion took place between June 20 and July 1, 2017, cloths were retrieved between July 17 and 20, 2017. Soil respiration, average CRR, vegetation N concentration and vegetation C:N ratio are defined as ecosystem functions, soil C and N concentration, soil temperature and moisture as soil abiotic properties, and bacterial and fungal richness (number of taxa), diversity (Shannon) and abundance as soil biotic properties.

Statistical analyses
Univariate analyses for ecosystem functions, soil biotic and abiotic properties
We tested whether individual ecosystem functions, soil biotic and abiotic properties differed between carcass and control (“Location”), bison and elk (“Species”) and days since kill (“DSK”). For this purpose, we used linear mixed effect models (LMM, “nlme” package v 3.1 – 131.1 in R v 3.4.4; Pinheiro, Bates, DebRoy, & Sarkar, 2018; R Core Team, 2019) with Location, Species, Location x Species and DSK as fixed effects. Site was included as random effect to account for the paired design. We developed a separate model for all dependent variables. All but bacterial richness, fungal richness, fungal diversity and vegetation N concentration were natural-log transformed to meet model assumptions. For each LMM, we calculated contrasts to assess the specific comparisons we were interested in with the “lsmeans” package v 2.27-62 (Lenth & Love, 2018): 1) carcass vs control, 2) carcass bison vs control bison, and 3) carcass elk vs control elk. We also tested whether we had differences between bison and elk carcasses or the sites where bison and elk were killed and included contrasts 4) carcass bison vs carcass elk and 5) control bison vs control elk.
We calculated the log response ratio (LRR = ln[carcass/control]) to obtain carcass effects for all variables for both species separately. LRR < 0 indicates higher value at control compared to carcass, LRR > 0 indicates higher values at carcass compared control. We used LRRs for visualization and to assess spatial patterns in carcass effects across YNP. For this purpose we calculated the Moran’s I statistic for each ecosystem function, soil biotic and abiotic property based on a latitude-longitude matrix with the “moran.test” function in the “spdep” package version 1.1-3 (Bivand et al., 2019).
Multivariate analyses
Rare OTUs, defined as OTUs with a low abundance of reads, were retained in multivariate methods because they only marginally influence these analyses (Gobet, Quince, & Ramette, 2010). Bray–Curtis dissimilarity matrices were generated based on square-root-transformed matrices. We used Principal Coordinate Analyses (PCoA) to assess how soil bacterial and fungal communities differed between control and carcass of bison and elk (“vegan” package v 2.5-4, Oksanen et al., 2019). We then extracted PCoA axes scores 1 and 2 and used LMM (“nlme” package) with Location, Species, Location x Species and DSK as fixed effects. Site was, again, included as random effect. We again calculated the contrasts as described above using the “lsmeans” package. We also assessed how ecosystem functions, and soil abiotic and biotic properties were related to the soil bacteria and fungi community structure associated with bison and elk control and carcasses using the “envfit” function in the “vegan” package (Oksanen et al., 2019).
Indicator species analyses were performed using the multipatt function implemented in the “indicspecies” package version 1.7.6 with 100000 permutations (De Caceres & Jansen, 2016). This step allowed to identify OTUs that led to changes in multivariate patterns between control and carcass of both bison and elk separately (De Cáceres, Legendre, & Moretti, 2010). The multipatt function uses a point biserial correlation coefficient statistical test. Indicator OTUs were defined as bacterial and fungal OTUs with more than 50 sequences, i.e., removing rare taxa and taxa with low abundances containing little indicator information (Rime et al., 2015) and that were significantly correlated with Location (p < 0.05, correlation coefficient > 0.3). A heatmap of these OTUs were generated with the vegan and ggplot2 packages. The indicator analyses were performed in R version 3.3.3 (R Core Team, 2017).

References
Abarenkov, K., Henrik Nilsson, R., Larsson, K.-H., Alexander, I. J., Eberhardt, U., Erland, S., … Kõljalg, U. (2010). The UNITE database for molecular identification of fungi – recent updates and future perspectives. New Phytologist, 186(2), 281–285. doi:10.1111/j.1469-8137.2009.03160.x
Bengtsson-Palme, J., Hartmann, M., Eriksson, K. M., Pal, C., Thorell, K., Larsson, D. G. J., & Nilsson, R. H. (2015). metaxa2: improved identification and taxonomic classification of small and large subunit rRNA in metagenomic data. Molecular Ecology Resources, 15(6), 1403–1414. doi:10.1111/1755-0998.12399
Bengtsson-Palme, J., Ryberg, M., Hartmann, M., Branco, S., Wang, Z., Godhe, A., … Nilsson, R. H. (2013). Improved software detection and extraction of ITS1 and ITS2 from ribosomal ITS sequences of fungi and other eukaryotes for analysis of environmental sequencing data. Methods in Ecology and Evolution, 4(10), 914–919. doi:10.1111/2041-210X.12073
Bivand, R., Altman, M., Anselin, L., Assuncao, R., Berke, O., Blanchet, G., … Yu, D. (2019). spdep: Spatial dependence, weighthing schemes, statistics. R package version 1.1-3.
Bump, J. K., Peterson, R. O., & Vucetich, J. A. (2009). Wolves modulate soil nutrient heterogeneity and foliar nitrogen by configuring the distribution of ungulate carcasses. Ecology, 90(11), 3159–3167.
Bump, J. K., Webster, C. R., Vucetich, J. A., Peterson, R. O., Shields, J. M., & Powers, M. D. (2009). Ungulate carcasses perforate ecological filters and create biogeochemical hotspots in forest herbaceous layers allowing trees a competitive advantage. Ecosystems, 12(6), 996–1007. doi:10.1007/s10021-009-9274-0
Danell, K., Berteaux, D., & Brathen, K. A. (2002). Effect of muskox carcasses on nitrogen concentration in tundra vegetation. Arctic, 55(4), 389392.
De Caceres, M., & Jansen, F. (2016). indicspecies: relationship between species and groups of species. R package version 1.7.6.
De Cáceres, M., Legendre, P., & Moretti, M. (2010). Improving indicator species analysis by combining groups of sites. Oikos, 119(10), 1674–1684. doi:10.1111/j.1600-0706.2010.18334.x
Edgar, R. C. (2013). UPARSE: highly accurate OTU sequences from microbial amplicon reads. Nature Methods, 10, 996.
Edgar, R. C., & Flyvbjerg, H. (2015). Error filtering, pair assembly and error correction for next-generation sequencing reads. Bioinformatics, 31(21), 3476–3482. doi:10.1093/bioinformatics/btv401
Frey, B., Niklaus, P. A., Kremer, J., Lüscher, P., & Zimmermann, S. (2011). Heavy-machinery traffic impacts methane emissions as well as methanogen abundance and community structure in oxic forest soils. Applied and Environmental Microbiology, 77(17), 6060–6068. doi:10.1128/AEM.05206-11
Frey, B., Rime, T., Phillips, M., Stierli, B., Hajdas, I., Widmer, F., & Hartmann, M. (2016). Microbial diversity in European alpine permafrost and active layers. FEMS Microbial Ecology, 92(3), fiw018.
Frossard, A., Donhauser, J., Mestrot, A., Gygax, S., Bååth, E., & Frey, B. (2018). Long- and short-term effects of mercury pollution on the soil microbiome. Soil Biology and Biochemistry, 120, 191–199. doi:https://doi.org/10.1016/j.soilbio.2018.01.028
Geremia, C., Wallen, R., & White, P. J. (2017). Status report of the Yellowstone bison population, September 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center for Resources.
Gobet, A., Quince, C., & Ramette, A. (2010). Multivariate cutoff level analysis (MultiCoLA) of large community data sets. Nucleic Acids Research, 38(15), e155–e155. doi:10.1093/nar/gkq545
Latter, P., & Howson, G. (1977). The use of cotton strips to indicate cellulose decomposition in the field. Pedobiologia, (17), 145–155.
Latter, P., & Walton, D. (1988). The cotton strip assay for cellulose decomposition studies in soil: history of the assay and development. In Cotton strip assay: an index for decomposition in soils (pp. 7–9). ITE Symposium, Institute of Terrestrial Ecology, Natural Environment Research Council, UK.
Lenth, R., & Love, J. (2018). lsmeans: least-squares means. R package version 2.27-62.
Martin, M. (2011). Cutadapt removes adapter sequences from high-throughput sequencing reads. EMBnet.Journal, 17(1), 10–12.
Meagher, M. M. (1973). The bison of Yellowstone National Park. NPS Scientific Monograph (Vol. 1). National Park Service, Yellowstone Center for Resources.
Melis, C., Selva, N., Teurlings, I., Skarpe, C., Linnell, J. D. C., & Andersen, R. (2007). Soil and vegetation nutrient response to bison carcasses in Białowieża Primeval Forest, Poland. Ecological Research, 22(5), 807–813. doi:10.1007/s11284-006-0321-4
Nikolenko, S. I., Korobeynikov, A. I., & Alekseyev, M. A. (2013). BayesHammer: Bayesian clustering for error correction in single-cell sequencing. BMC Genomics, 14(1), S7. doi:10.1186/1471-2164-14-S1-S7
Oksanen, J., Blanchet, F. G., Friendly, M., Kindt, R., Legendre, P., McGlinn, D., … Wagner, H. H. (2019). vegan: community ecology package. R package version 2.5-4.
Pinheiro, J., Bates, D., DebRoy, S., & Sarkar, D. (2018). nlme: Linear and nonlinear mixed effect models. R package version 3.1-131.1.
Quast, C., Pruesse, E., Yilmaz, P., Gerken, J., Schweer, T., Yarza, P., … Glöckner, F. O. (2013). The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research, 41(Database issue), D590–D596. doi:10.1093/nar/gks1219
Quimby, D. C., & Johnson, D. E. (1951). Weights and measurements of Rocky Mountain elk. Journal of Wildlife Management, 15, 57–62.
R Core Team. (2017). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Zurich, Switzerland.
R Core Team. (2019). R: A language and environment for statistical computing. Vienna, Austria: R Foundation for Statistical Computing.
Rime, T., Hartmann, M., Brunner, I., Widmer, F., Zeyer, J., & Frey, B. (2015). Vertical distribution of the soil microbiota along a successional gradient in a glacier forefield. Molecular Ecology, 24(5), 1091–1108. doi:10.1111/mec.13051
Risch, A. C., Jurgensen, M. F., & Frank, D. A. (2007). Effects of grazing and soil micro-climate on decomposition rates in a spatio-temporally heterogeneous grassland. Plant and Soil, 298(1–2), 191–201. doi:10.1007/s11104-007-9354-x
Schloss, P. D., Westcott, S. L., Ryabin, T., Hall, J. R., Hartmann, M., Hollister, E. B., … Weber, C. F. (2009). Introducing mothur: open-source, platform-independent, community-supported software for describing and comparing microbial communities. Applied and Environmental Microbiology, 75(23), 7537–7541. doi:10.1128/AEM.01541-09
Smith, D., Stahler, D., Cassidy, K., Stahler, E., Metz, M., Cassidy, B., … Cato, E. (2018). Yellowstone National Park wolf project annual report 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center of Resources.
Wang, Q., Garrity, G. M., Tiedje, J. M., & Cole, J. R. (2007). Naive Bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy. Applied and Environmental Microbiology, 73(16), 5261–5267. doi:10.1128/AEM.00062-07
Withington, C., & Sanford Jr., R. (2007). Decomposition rates of buried substances increase with altitude in a forest-alpine tundra ecotone. Soil Biology and Biochemistry, (39), 68–75.

Please cite this paper together with the citation for the datafile.

bacteria

display_name: bacteria

carcass

display_name: carcass

carrion

display_name: carrion

decomposition

display_name: decomposition

detritus

display_name: detritus

fungi

display_name: fungi

soil-biodiversity

display_name: soil-biodiversity

wolf

display_name: wolf

yellowstone

display_name: yellowstone

en: Elk and bison carcasses in Yellowstone, USA


greenland-shrubs-and-microclimate

maintainer: Nathalie Chardon

title_for_slug: greenland-shrubs-and-microclimate

en: field-data climate accessible-shrub-forest validation sdm arctic

en: Kangerluarsunnguaq

media_type: .csv

en:
 Collected August 2020 (PI: Nathalie Isabelle Chardon)

These data collected August 2020 (PI: Nathalie Isabelle Chardon). Please contact N. I. Chardon (nathalie.chardon_at_gmail.com) for individual quadrat (i.e. 1 m x 1 m) data, which are averaged at the 90 m spatial grid here.

 COLUMN ABBREVIATIONS

 Metadata for 90 m spatial grid

id: sampling zone and unique 90 m grid identifier

long: WGS84 longitude

lat: WGS84 latitude

x_stere: longitude in Polar Stereographic (EPSG 4326)

y_stere: latitude in Polar Stereographic (EPSG 4326)

date: sampling day.month.year

 Species presence [1] or absence [0] at grid level

alcr: _Alnus crispa_

bena: _Betula nana_

dila: _Diapensia lapponica_

emni: _Empetrum nigrum_

hahy: _Harimanella hypoides_

lopr: _Loiseleuria procumbens_

oxpa: _Oxycoccus palustre_

phca: _Phyllodoce caerulea_

rhod: _Rhododendron_ sp.

saar: _Salix arctica_

sagl: _Salix glauca_

sahe: _Salix herbacea_

vaul: _Vaccinium uliginosum_

drin: _Dryas integrifolia_

thpr: _Thymus praecox_

 Habitat characteristics [% cover]

shrub: all shrub species

gram: graminoids

forb: forbs

bryo: bryophytes

lich: lichens

litt: litter

bare: bare ground

stone: stones (> 2 cm)

org: organic crust

 Shrub species height (maximum vegetative height) [mm] and cover (estimated in 1x1 m quadrat) [%]

alcr_c: _Alnus crispa_ cover

alcr_h: _Alnus crispa_ height

bena_c: _Betula nana_ cover

bena_h: _Betula nana_ height

dila_c: _Diapensia lapponica_ cover

dila_h: _Diapensia lapponica_ height

emni_c: _Empetrum nigrum_ cover

emni_h: _Empetrum nigrum_ height

hahy_c: _Harimanella hypoides_ cover

hahy_h: _Harimanella hypoides_ height

lopr_c: _Loiseleuria procumbens_ cover

lopr_h: _Loiseleuria procumbens_ height

oxpa_c: _Oxycoccus palustre_ cover

oxpa_h: _Oxycoccus palustre_ height

phca_c: _Phyllodoce caerulea_ cover

phca_height: _Phyllodoce caerulea_ height

rhod_c: _Rhododendron_ sp. cover

rhod_h: _Rhododendron_ sp. height

saar_c: _Salix arctica_ cover

saar_h: _Salix arctica_ height

sagl_c: _Salix glauca_ cover

sagl_h: _Salix glauca_ height

sahe_c: _Salix herbacea_ cover

sahe_h: _Salix herbacea_ height

vaul_c: _Vaccinium uliginosum_ cover

vaul_h: _Vaccinium uliginosum_ height

drin_c: _Dryas integrifolia_ cover

drin_h: _Dryas integrifolia_ height

 Community characteristics

rich_pa: shrub species richness at grid level

rich: shrub species richness averaged across 3 1x1 m sampling quadrats per grid

shan: Shannon diversity (‘vegan’ package; Oksanen et al. 2019)

comp_bena: shrub competition on _Betula nana_ (i.e. summed cover of non-_B. nana_ species) [% cover]

comp_sagl: shrub competition on _Salix glauca_ (i.e. summed cover of non-_S. glauca_ species) [% cover]

ht_cwm: maximum shrub canopy height (i.e. community weighted mean by abundance of maximum shrub height) [mm]

 Topography and terrain wetness (calculated from)

tcws: Tasseled Cap Wetness component (Sentinal images)

slope: slope angle (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

twi: SAGA wetness index (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015)

asp: aspect (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

 Downscaled climate (time series 1984 – 2013)

insoljja: average June-August insolation [MJ cm-2 yr-1]

precipmam: cumulative March-May precipitation [mm]

tempcont: yearly maximum – minimum temperature [ºC]

tempmin: yearly minimum temperature [ºC]

precipjja: cumulative June-August precipitation [mm]

tempjja: average maximum June-August temperature [ºC]

tempmax: yearly maximum temperature [ºC]

en: GitLab Repository

media_type: .zip

en: Zip drive of GitLab repository contents (https://gitlab.com/nathaliechardon/gl_microclim).

en: Nuup Kangerlua

en:
 Collected July-August 2011-2013 (PI: Jacob Nabe-Nielsen)

These data collected July-August 2011-2013 (PI: Jacob Nabe-Nielsen). Please contact J. Nabe-Nielsen (jnn_at_ecos.au.dk) to request access to data on all surveyed shrub species. Available here are only data used in Chardon et al. 2022.

 COLUMN ABBREVIATIONS

 Metadata for 90 m spatial grid

year: sampling year

alt: average altitude of grid as recorded during field surveys [m]

long: WGS84 longitude

lat: WGS84 latitude

x_stere: longitude in Polar Stereographic (EPSG 4326)

y_stere: latitude in Polar Stereographic (EPSG 4326)

 Species presence [1] or absence [0] at grid level

pa_bena: _Betula nana_

pa_sagl: _Salix glauca_

 Shrub species cover (calculated from pin hits in 0.7 x 0.7 m frame, based on total of 25 hits) [%]

cov_bena: _Betula nana_ cover

cov_sagl: _Salix glauca_ cover

 Downscaled climate (time series 1984 – 2013)

tempjja: average maximum June-August temperature [ºC]

tempmax: yearly maximum temperature [ºC]

tempmin: yearly minimum temperature [ºC]

tempcont: yearly maximum – minimum temperature [ºC]

precipmam: cumulative March-May precipitation [mm]

precipjja: cumulative June-August precipitation [mm]

insoljja: average June-August insolation [MJ cm-2 yr-1]

 Topography and terrain wetness (calculated from)

twi: SAGA wetness index (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015)

slope: slope angle (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

asp: aspect (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

tcws: Tasseled Cap Wetness component (Sentinal images)

 Community characteristics

rich: shrub species richness averaged across pin-point frames per grid

shan: Shannon diversity (‘vegan’ package; Oksanen et al. 2019)

comp_bena: shrub competition on Betula nana (i.e. summed cover of non-_B. nana_ species) [% cover]

comp_sagl: shrub competition on Salix glauca (i.e. summed cover of non-_S. glauca_ species) [% cover]

en:
 Study Aim

We collected these data to alternatively train and validate high resolution (~ 90 m) Species Distribution Models (SDMs) and Species Abundance Models (SAMs) for _Betula nana_ L. (dwarf birch, Betulaceae) and _Salix glauca_ L. (grey willow, Salicaceae) in Southwest Greenland to assess how well such models can predict local-scale patterns.

 Data Description

Individual (presence-absence, abundance, maximum vegetative height) and community (species composition, maximum canopy height) shrub data for two fjords near Nuuk, Southwest Greenland. Also provided are corresponding downscaled climate data as well as calculated topographic and terrain wetness indicator variables.

 Nuup Kangerlua (Godthåbsfjord)

_Betula nana_ and _Salix glauca_ presence-absence, abundance, community species richness

 Kangerluarsunnguaq (Kobbefjord)

Shrub presence-absence, abundance, maximum vegetative height, community composition, maximum shrub canopy height

 Methods

 Field survey in Nuup Kangerlua

We conducted a stratified systematic plant survey along the length of Nuup Kangerlua (NK) fjord in Soutwesth Greenland (Fig. 1 in Chardon et al. 2022; following Nabe-Nielsen et al., 2017). At five distinct sites, we sampled along elevational gradients to collect data on presences, absences, abundance, and species composition of all woody species using a 0.7 x 0.7 m pin-point frame (Fig. 1e in Chardon et al. 2022). For model training, we converted these pin-point data to percent cover estimates based on the number of pins dropped (n = 25 per plot) and averaged them across the 119 spatio-climatic grids (see next section) corresponding to the plot locations (for details see Appendix S2 in Chardon et al. 2022).

 Field survey in Kangerluarsunnguaq

We conducted a random stratified plant survey in Kangerluarsunnguaq (K) fjord in Southwest Greenland. We used a preliminary Species Abundance Model trained with summed pin counts of _Betula nana_ in NK fjord (see Fig. S1.3 in Chardon et al. 2022) to stratify the ~ 27 x 17 km fjord landscape into low, medium, and high abundances classes. We randomly selected 90 x 90 m spatio-climatic grids to survey in each class for a total of 200 grids, ensuring that they were accessible by foot or boat (for details see Appendix S2 in Chardon et al. 2022). Within each grid, we sampled within three 1 m2 quadrats arranged in a randomly rotated equilateral triangle centered on the mid-point of the cell. We used a gridded sampling quadrat with 1% delineations (Fig. 1h in Chardon et al. 2022) to record woody species presences, absences, and composition, estimated percent cover, and measured maximum shrub species vegetatitve height. At every plot, we also visually scanned the area in a 20 m radius from the plot and recorded the presence of any additional shrub species to estimate grid-level species richness. As in NK fjord, we averaged these data at the grid level (for details see Appendix S2 in Chardon et al. 2022).

 Biotic variables

We calculated biotic microscale variables from the plant survey data collected in NK and K fjords. We calculated shrub species richness, diversity, and competition (i.e. sum of non-B. nana or non-S. glauca pin hits or percent cover). In K fjord, we also calculated canopy height as the community weighted mean (by abundance) of maximum vegetative shrub height.

 Climate variables

We computed high resolution temperature, precipitation, and insolation for local scale data for the study area by statistically downscaling climate time series (1982 - 2013) from the monthly CHELSA data (Karger et al. 2017). We downscaled these data from 30 arc sec (~ 400 m at the latitude of our study) to our target grid size of ~ 90 m with geographic weighted regression and using the MEaSUREs Greenland Ice Mapping Project (GIMP) Digital Elevation Model (DEM) v. 1 (Howat et al., 2014, 2015). We then calculated 30-year averages of the climate parameters: average summer (June – August) maximum temperature, yearly maximum temperature, yearly minimum temperature, temperature continentality (yearly max. - min. temperatures), cumulative Spring (March – May) precipitation, cumulative summer precipitation, and average summer incident solar radiation (henceforth, insolation) (for calculation details see Appendices S2, S3 in Chardon et al. 2022 and Appendix S2 in von Oppen et al. 2021).

 Topography and terrain wetness indicator variables

We calculated several topographic and terrain wetness indices at a local scale. We derived slope, aspect, and the SAGA wetness index (hereafter TWI; Boehner et al., 2002; Boehner and Selige, 2006) from the GIMP DEM. TWI is a measure of how ‘wet’ an area is, based on water drainage from the surrounding landscape. We also calculated the tasseled cap wetness component (hereafter TCW, Crist and Cicone 1984) from satellite images (for details see Appendices S2, S3 in Chardon et al. 2022) as an alternative measure of wetness.

 Computer code

Attached as zip file and available on GitLab (https://gitlab.com/nathaliechardon/gl_microclim)

 Third-party data

Data used to calculate climate, topography, and terrain wetness indicator variables are publicly available (see Appendix S2 in Chardon et al. 2022 for all data references).

accessible-shrub-forest

display_name: accessible-shrub-forest

arctic

display_name: arctic

climate

display_name: climate

field-data

display_name: field-data

sdm

display_name: sdm

validation

display_name: validation

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Greenland shrubs and microclimate


maintainer: Paraskevi Georgakaki

en: ice-crystal-number-concentration wrf blowing-snow liquid-water-content swiss-alps jungfraujoch secondary-ice-production ice-water-content

en: Observational data

en:
The .zip file contains 6 .csv files including all microphysical measurements taken at the Jungfraujoch station during the two periods of interest:

* 25-28 January 2014 : northwesterly-winds (NW)
* 29 January - 1 February 2014 : southeasterly-winds (SE)

The total Ice Crystal Number Concentration (ICNC; reported in L⁻¹) is measured by the two-dimensional stereo hydrometeor spectrometer (2D-S; Lawson et al., 2006) over the size range 10-1280 μm. The total ice water content (IWC; reported in gm⁻³) is also derived by the 2D-S data using the Brown and Francis (1995) mass-diameter relationship. Finally, the quantification of the liquid water content (LWC; reported in gm⁻³) is based on the liquid droplet size distribution data derived from a DMT cloud droplet probe (CDP; Lance et al., 2010) over the size range 2-50 μm. The frequency of the measurements in the .csv files is 30 min, to match the output frequency of the model. Datetime is also reported in the files (DD/MM/YYYY h:mm) in UTC.

Acknowledgment: Collection and pre-processing of the microphysical measurements has been performed by Gary Lloyd (gary.lloyd@manchester.ac.uk). More details about the instrumentation during the CLACE2014 campaign can be found in Lloyd et al. (2015).

en: WRF outputs

media_type: zip-compressed folder of NetCDF files

en:
The .zip file contains all the NetCDF outputs produced by the mesoscale Weather Research and Forecasting (WRF) model (version: 4.0.1). Two case studies were simulated in this study, between 25-28 January 2014 (00:00 UTC) and 29 January - 1 February 2014 (00:00 UTC), respectively. The former is denoted as "NW" and the latter as "SE", owing to the prevailing wind conditions at the Jungfraujoch (JFJ) station.

The outputs come from the innermost domain of the simulations with a spatial resolution of 1 km and are extracted from the nearest to JFJ model grid point (46.55°N 7.98°E). The dimensions of each model variable is [145,100], which corresponds to time and height, respectively. The frequency of the outputs is 30 min. Note that the first 24 hours of each simulation (i.e., the first 48 outputs) were considered spin up time.

The following sets of sensitivity simulations were presented in this study:

* CNTRL_NW.nc, CNTRL_SE.nc : Sensitivity simulations performed with the default version of WRF
* DS_PHILL_NW.nc, DS_PHILL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Phillips et al. (2018)
* DS_SULL_NW.nc, DS_SULL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Sullivan et al. (2018)
* PHILL_NW.nc, PHILL_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Phillips et al. (2017)
* TAKAH_NW.nc, TAKAH_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Sullivan et al. (2018) based on Takahashi et al. (1995)
* TAKAHrim_NW.nc, TAKAHrim_SE.nc : Same set-up as before but applied only to collisions between rimed ice particles
* BIPS_Xk0_DY_NW.nc, BIPS_Xk0_DY_SE.nc : Sensitivity simulations including a source of Xk0 (either 10.0 or 100.0 L⁻¹) ice crystals with sizes of DY (either 10 or 100 μm) in the first atmospheric level of the model
* BIPS100_PHILL_NW.nc, BIPS100_PHILL_SE.nc : Sensitivity simulations where the combined effect of blowing snow and ice-ice collisional break-up is examined

en:
This repository contains all WRF model outputs and observational data sets used for the paper:
Georgakaki, P., Sotiropoulou, G., Vignon, É., Billault-Roux, A.-C., Berne, A., and Nenes, A.: Secondary ice production processes in wintertime alpine mixed-phase clouds, Atmos. Chem. Phys. Discuss., https://doi.org/10.5194/acp-2021-760, in review, 2021.

blowing-snow

display_name: blowing-snow

ice-crystal-number-concentration

display_name: ice-crystal-number-concentration

ice-water-content

display_name: ice-water-content

jungfraujoch

display_name: jungfraujoch

liquid-water-content

display_name: liquid-water-content

secondary-ice-production

display_name: secondary-ice-production

swiss-alps

display_name: swiss-alps

wrf

display_name: wrf

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Data for the publication "Secondary ice production processes in wintertime alpine mixed-phase clouds"


en: wind-speed anemometer raclets wind wind-velocity wind-direction

en: Sonic wind component v

media_type: npy

en:
The data contains values for v direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic time

en: The data set contains the time in YYYY-mm-dd HH:MM:SS.sss for the anemometer data. The time is given in UTC+1.

en: Sonic wind component w

en:
The data contains values for w direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component u

en:
The data contains values for u direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic temperature

en: The data set contains values of temperature (°C) measured with the anemometer at a sampling frequency of 20 Hz.

en: A Young 81000 sonic anemomenter was deployed at Gotschnagrat (LON: 46.859 LAT: 9.849) to record three components of the wind velocity (u, v, w in [m s‾ ¹]) and air temperature (Ts in [°C]). The anemomenter was mounted in direction North at a height of 1.5 m above snow surface at the beginning. The time within each data set is given in UTC+1. Instrument specifications can be found [here](http://www.youngusa.com/Manuals/81000-90(I).pdf) .

anemometer

display_name: anemometer

raclets

display_name: raclets

wind

display_name: wind

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

wind-velocity

display_name: wind-velocity

en: Snow Drift Station - 3D Ultrasonic


dischmex-meteorological-measurements

maintainer: Rebecca Mott

title_for_slug: dischmex-meteorological-measurements

en: meteorological-data meteo-station dischmex meteorological-measurements dischma

en: Meteorological measurements 2016

media_type: application/pdf

en: Location of the meteorological stations

format: PDF

mimetype: application/pdf

en: Meteorological measurement 2015

en: Overview sensors

en: Meteorological measurements 2014

media_type: application/zip

en: data

en: Meteorological measurement 2014

en:
Meteorological measurements recorded in the Dischma valley from 2014-2016. In 2014 and 2015 we used 11 mobile weather stations from sensorscope to record meteorological parameter in the upper Dischma valley in the closer surroundings of the Gletschboden area. The meteorological stations are eqiupped with at least air temperature/humidity, wind velocity and wind direction sensors. Some stations are additionally equipped with precipitation, shortwave radiation and snow surface temperature sensors.
Three transects were installed at different aspects and were equipped with air temperature/humidity and wind sensors. Transect 1 (stations 2-4) provides meteorological Information on an east-north-east facing slope at elevations ranging between 2100 m and 2500 m. Transect 2 (stations 5-7) provides meteorological Information on a south-west slope and transect 3 (stations 8-10) on a north-west slope. Station 1 is fully equipped with meteorological sensors (temperature/humidity, wind, IR, up and downwand shortwave radiation and precipitation).
In 2016, mobile stations from sensorscope were replaced with six permanent meteorological stations. Meteorological stations 1-3 are equipped with an air temperature/humidity sensor, two wind speed sensors, a wind direction sensor and an incoming and outgoing shortwave radiation sensor. Stations 4 and 6 are equipped with an air temperature/humidity sensor and a wind speed/direction sensor. Station 5 is a equipped with an air temperature/humidity sensor, a wind speed/direction sensor, a snow surface temperature sensor, an incoming and outgoing shortwave radiation sensor and an incoming longwave radiation sensor.

dischma

display_name: dischma

dischmex

display_name: dischmex

meteo-station

display_name: meteo-station

meteorological-data

display_name: meteorological-data

meteorological-measurements

display_name: meteorological-measurements

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: DISCHMEX - Meteorological measurements


maintainer: Axel Volkwein

en: experiment impact-testing field-tests field-test mass-movements rockfall natural-hazard field-data rockfall-experiments experiments

en: Acceleration measurements

en: The zip file contains five excel files, one for each test conducted. The first sheet contains the raw data and a data set that went through a low-pass filter. The sheet "Allgemein" contains calibration factors for the sensors and time details of a test. The sheets "DiaDaten" and "DiaDatenGefiltert" show the measurements over time. The block and slab kinetics are determined in the sheets "ZeitintegrationBlock" and "ZeitintegrationPlatte". The sheet "VergleichBeschleunigungen" shows the influence of the low-pass-filter and a running average filter on the block accelerations.

en: Video analysis

en: The zip contains five Excel-files that in turn contain the results of the performed video analyses. The sheet "Daten" contains the pixels of different positions on the blocks that were tracked by the software "Kinovea". The sheet "Auswertung" determines the block kinetics based on the pixel data over time.

en: Raw data (high speed videos, acceleration measurements, laboratory tests)

en:
This file contains

* the high speed videos showing the concrete blocks impacting the gallery roof.
* the raw data of the acceleration measurements
* the data of Tiefbauamt Graubünden containg the tension tests of gallery reinforcment, ME-testing the cushion layer and the tests on concrete samples.

en: Five full-scale field tests were conducted with concrete blocks weighting between 800 and 3200 kg being dropped onto the roof of a gallery structure made from reinforced concrete. The impacts were recorded using high-speed video and acceleration measurements at the falling blocks. The dataset contains the raw data as well as the analyses of the block trajectories, i.e. kinetics and dynamics. Setup of the measurements and the analyses conducted are published in Volkwein, A. "Durchführung und Auswertung von Steinschlagversuchen auf eine Stahlbetongalerie", WSL-Berichte, Heft 68, 2018.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

impact-testing

display_name: impact-testing

mass-movements

display_name: mass-movements

natural-hazard

display_name: natural-hazard

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Rockfall gallery testing Parde 2016


en: environmental--policy ecology switzerland environmental---history historical-carthography wetlands

en: Wetlands 1850 - 2010 (shapefiles)

en:
 History of wetlands - GIS-Layers
 Location of wetlands based on signatures in topographic maps
* Basis 1850: original measuring table sheets Dufour created between the years 1834 and 1863.
* Basis 1900/ Basis 1950: The Siegfried maps were updated and published at regular intervals between 1870 and 1949. This long period of time made it possible to reconstruct wetlands for two periods based on the Siegfried Maps: the first edition (hereinafter referred to as "1900") and the last edition ("1950").
* Basis 2010: Map sheets from the National Map from 2006 to 2011 were used for the most recent time period of the reconstruction.
 Location of wetlands due to reconstructions
The reconstruction **must not** be interpreted in the sense of a surface-accurate separation, but shows without claim to location accuracy the approximate extent of the areas that would have corresponded to the mapping criteria for wetlands used in today's topographic maps around 1850, 1900 and 1950. The basics can be found in Stuber & Bürgi 2019, chapter 5.4.

en:
Naturally, large parts of the Swiss Plateau are characterised by wetlands
and meandering rivers. That this is no longer the case today is the result
of centuries of efforts to obtain dry land. But how did this process take
place? What were the relevant actors and what were their motivations? And
what can be said about the ecological consequences of this development?

In a research project on the history of wetlands in Switzerland since 1700,
we conducted (a) a historical analysis of the development of land use in
wetlands and the actors involved, (b) a historical-cartographic
reconstruction of wetland extent since 1850 and (c) an evaluation of
ecological effects of changes in wetlands on various organisms groups.

The series of GIS layers on wetland history stem from the second part of
the project. The area reconstruction is based on digitized and homogenized
signatures from national map series, as they have been available since
about 1850. Details about the digitalization process and the homogenization
procedures applied ("Rekonstruktionen") are included in Stuber & Bürgi
2019.

Book Citation:
 > Stuber M, Bürgi M (2019) Vom «eroberten Land» zum Renaturierungsprojekt. Geschichte der Feuchtgebiete in der Schweiz seit 1700. "Bristol Schriftenreihe", Band 59. Haupt Verlag, Bern, Stuttgart, Wien. 262 Seiten.

ecology

display_name: ecology

environmental---history

display_name: environmental---history

environmental--policy

display_name: environmental--policy

historical-carthography

display_name: historical-carthography

switzerland

display_name: switzerland

wetlands

display_name: wetlands

en: History of wetlands in Switzerland since 1850


media_type: CSV

en:
This dataset contains the statistics on the number of avalanche fatalities per **calendar year** in Switzerland. The data collection commences with the beginning of the year 1937. After the completion of a hydrological year, which is the standard way avalanche fatalities are summarized in Switzerland and ends on the 30th of September, the new data is appended to the existing dataset.
If you require annual statistics per hydrological year, please download the data from here: [https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936]

The following information is contained (by column and column title):
 - year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste, away from open and secured ski runs)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)

The definitions for these four categories, as described in the guidelines to the avalanche accident database are:

tour:
activities include back-country ski, snowboard or snow-shoe touring

offpiste:
access from ski area, generally from the top of a skilift with short hiking distances

transportation.corridors (Techel et al., 2016):
people travelling or recreating on open or temporarily closed transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)

buildings (Techel et al., 2016):
people inside or just outside buildings, and workers on high alpine building sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Number of avalanche fatalities per calendar year in Switzerland since 1937


high-resolution-climate-data-for-europe

title_for_slug: high-resolution-climate-data-for-europe

en: minimum-temperature cordex europe precipitation daily-climate maximum-temperature air-temperature eur11

en: Data Access

en: CHELSA EUR11 Technical Documentation

media_type: PDF

en: As the CHELSA project is continuously expanded, certain new parameters, time scales etc. are not included anymore in the original publication (Karger et al. 2017). We are therefore provide this document as a guideline of the current climatic parameters available and will expand it as new parameters or time periods will become available. Please refer to the version history for changes made in the document.

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present downscaled climate data for the CORDEX EUR11 domain at a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperature lapse rates. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height. The resulting data consist of a daily temperature and precipitation timeseries.

The data is distributed under a: Creative Commons: Attribution 4.0 International (CC BY 4.0) license.

air-temperature

display_name: air-temperature

cordex

display_name: cordex

daily-climate

display_name: daily-climate

europe

display_name: europe

maximum-temperature

display_name: maximum-temperature

minimum-temperature

display_name: minimum-temperature

precipitation

display_name: precipitation

en: High resolution climate data for Europe


en: natural-hazards experiments mass-movements field-data field-tests rockfall experiment field-test trajectory

en: These data contain the point clouds obtained from laser scanning the test slope and the six test blocks used for the experiments. The coordinates of the slope are given in CH-1903 format. The coordinates of the block point clouds are kept in a lokal x/y/z coordinate system.

en: Block trajectories recorded from local positioning system

media_type: ascii, tab separated, also as Excel table

en: This file contains more than 80 rockfall trajectories projected onto the terrain, i.e. the positions of the single blocks over time during the single tests that were recorded by the local positioning system with about 10Hz. It contains the detected positions as well as a smoothened path (see Volkwein et al., Geosciences, 2018). The table also contains the derived velocities and accelerations along the slope (attention: these accelerations are the once that occur during an impact).

en: Jumps and impacts

media_type: ascii, tab separated, also as excel table

en: This table contains data of more than 2200 of each jumps and impacts of the test blocks on a grassy slope. It gives there durations in combination with acting accerlartions and the rotational speed of the blocks. The data were retrieved using the block internal accelerometer and rotation sensors. The combination of these data with the measurement from the local positioning system allows the deduction of jump lengths, slope gradient etc.

en: Overview of all tests

media_type: ZIP

en:
This table gives an overview on all tests performed including
- block used
- start & end position
- number of jumps
- etc.
-

en:
In summer 2014, 6 rock blocks between 20 and 80kg have been thrown in total 111 times down a slope at the Swiss Oberalppass close to the village Tschamut. The slope was mainly covered by grass and its lower part was flat and large enough to provide natural runouts of the single trajectories.

An extensive measurement program has been set up to measure the block trajectories: With surveyor's instruments the slope and the six used rock blocks were scanned and the start and end positions of each test were recorded. During the single events two cameras filmed the trajectories. A special sensor device located within the blocks recorded the acting accelerations and rotational speeds over time. Further, the device emitted a Wifi signal that got detected from eight receivers around the slope. Based on this signal the block position has been recorded over time.

The dataset contains all data that were gathered through above field campaign.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

mass-movements

display_name: mass-movements

natural-hazards

display_name: natural-hazards

rockfall

display_name: rockfall

trajectory

display_name: trajectory

education

en: Education and science

en: Repetitive trajectory testing in Tschamut 2014