en: dem orthoimage alps findelengletscher orthophoto uav dsm sankt-annafirn gletscher drone glacier griesgletscher

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 22th of September 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 3rd of August 2015.

en: Bulk Data Access

en: Link to the S3 bucket where all the data resources can be downloaded in bulk

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 15th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 26th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 21th of July 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 19th of April 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of July 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 09th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 13th of September 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 28th of September 2015.

media_type: application/pdf

en: This .pdf contains an orthoimage for each dataset as well as a Table which displays the number of flights made, image acquired, number of GCP set and the total area covered.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 15th of August 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 30th of August 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 2nd of July 2016.

en: This folder contains all UAV flights paths that we created for the Sankt Annafirn, the Findelengletscher and Griesgletscher. They have been created with the software eMotion2, that was developped for the eBee platform from Sensefly.

en:
 UAV-derived DSMs and orthoimages

Unmanned Aerial Vehicle (UAV) surveys were conducted between 2015 and 2016 on the Sankt Annafirn, Findelen- and Griesgletscher, situated in the Swiss Alps. Three surveys at the Sankt Annafirn allowed for a full glacier coverage, four surveys at Griesgletscher allowed an almost full glacier coverage and seven surveys at Findelengletscher allowed for a partial coverage of the glacier tongue (see individual datasets for exact extent). For each survey, a high resolution orthoimage and a Digital Surface Model (DSM) was created.

 UAV surveys:

Prior flight, Ground Control Points (GCPs) were deployed on the glacier surface and measured with a differential GPS (Trimble R7 or Leica GPS 1200). They allowed precise georeferencing of the UAV-derived datasets. UAV flight plans were planned with the software *eMotion 2* and a SenseFly eBee was used as surveying platform. The images were then processed with the software Agisoft Photoscan Pro 1.1.6 .

The location and dates of each survey can be found in the table together with the number of flights performed (Nflights), the number of acquired images (Nimages), the number of GCPs set (NGCPs) and the surveyed area.

A folder for each dataset is available (see folder name in table), which contains:

- An orthoimage *glacier_date_photoscan_oi_CH1903+_LV95_0.1m.tif*

- A Digital Surface Model *glacier_date_photoscan_dsm_CH1903+_LV95_0.1m.tif*

- The Agisoft Photoscan automatic processing report  *glacier_date_photoscan_report.pdf*

where:

- *glacier* is the name of the surveyed glacier

- *date* is the date of the UAV image acquisition

- *photoscan* is the name of the photogrammetric software

- *oi* or *dsm* the type of dataset

- *CH1903+_LV95* is the coordinate system and datum of the dataset

- *0.1m* is the resolution of the dataset in meter

- *.tif* is the extention of the dataset

Details about the UAV surveys, the image processing and the accuracy of the UAV-derived products can be found in this publication below.

Paper Citation:
 > _Gindraux et al. 2017. Accuracy Assessment of Digital Surface Models from Unmanned Aerial Vehicles’Imagery on Glaciers, Remote Sensing, 9, 186, 1-15, [doi: 10.3390/rs9020186](https://doi.org/10.3390/rs9020186)._

The folder UAV_flight_paths.zip contains all UAV flights performed on the Sankt Annafirn, Findelengletscher and Griesgletscher. The flights were planned with the software eMotion2 and have the .afp extention.

alps

display_name: alps

dem

display_name: dem

drone

display_name: drone

dsm

display_name: dsm

findelengletscher

display_name: findelengletscher

glacier

display_name: glacier

gletscher

display_name: gletscher

griesgletscher

display_name: griesgletscher

orthoimage

display_name: orthoimage

orthophoto

display_name: orthophoto

sankt-annafirn

display_name: sankt-annafirn

uav

display_name: uav

education

en: Education and science

en: UAV-derived Digital Surface Models and orthoimages for three alpine glaciers


maintainer: EnviDat Support

en: par long-term swiss-forest-lab meteo relative-humidity meteorology temperature precipitation wind-speed climate-change

state: active

type: dataset

en: Site photo of the forest station (LEB)

media_type: image/jpeg

en: Site photo of the forest station from below (viewing upwards the slope)

format: SERVICE

mimetype: image/jpeg

en: Forest station data (LEB)

media_type: text/csv

en: Data file.

format: CSV

mimetype: text/csv

en: Data plot of the forest station (LEB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

format: PDF

mimetype: application/pdf

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for one meteorological station in Lens in Switzerland which is located within a natural coniferous forest with Scots pine (_Pinus sylvestris_; 150-170 yrs)) as dominant tree species. The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Lens is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

fr: Education, science

de: Bildung, Wissenschaft

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Lens, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: reservoirs water-scarcity water-demand climate-change water-supply

en: Water demand (deprecated)

media_type: application/zip

en:
Warning: please use the corrected version 2, since this file contains errors for certain categories such as Livestock, Industry or Houshold.

Water demand estimates for the 307 medium-sized catchments for different categories for current and future conditions. One text file is provided per demand category. One column corresponds to one catchment (IDs compare to shapefile), The data are provided at monthly resolution in mm/d and can be converted to volumes by using the catchment area. E.g.
Q[mm/d] * catchment area [m²] /1000 = Q[m³/d]
or to obtain discharge in m³/s
Q[mm/d] * catchment area [m²]/1000/24/3600 = Q [m³/s].
Future irrigation and hydropower water demand are provided per climate model chain.

format: ZIP

mimetype: application/zip

en: Reservoir volumes

en: Reservoir volume for the 307 medium-sized catchments for different storage categories: natural lakes, artificial reservoirs, reservoirs for artificial snow production, drinking water reservoirs, and usable volumes of natural lakes. Unit: Mio m³. One column per catchment (see shapefile).

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of 307 catchments for which estimates of water supply, demand, and reservoir volumes are provided. The OBJECTID entry corresponds to the catchment ID which is used as a reference in the other datasets provided.

en: Water supply

en: Simulated discharge series for a reference period 1981-2010 and till the end of the century. Data are provided for 39 climate model chains and a control run based on the observed meteorology. Data are provided at daily resolution (mm/d).

en: Water demand version 2 (corrected version)

en:
The dataset Hydro-CH2018 reservoirs provides estimates of current and future water supply, water demand, and storage volumes for 307 medium-sized catchments in Switzerland.
Water supply for current (1981-2010) and future (2070-2099) climate conditions was simulated using the hydrological model PREVAH. For modeling current water supply, observed meteorological time series were used as input, while simulated meteorological time series derived from 39 model chains of the CH2018 initiative were used as an input for simulating future climate conditions.

Water demand was estimated for six categories:

- 1) Drinking water (households and tourism),
- 2) industry (second and third sector),
- 3) artificial snow production,
- 4) agriculture (irrigation and livestock feeding),
- 5) ecology (residual flows), and
- 6) hydropower.

Future estimates consider changes in demand related to population growth and changes in the hydrological conditions.
Storage volumes are provided for natural lakes (storage capacities and usable volumes), artificial reservoirs, reservoirs for artificial snow production, and drinking reservoirs.

A detailed description of the simulation and estimation procedures can be found in

*  Brunner, M.I., Björnsen Gurung, A., Zappa, M., Zekollari, H., Farinotti, D., Stähli, M., 2019. Present and future water scarcity in Switzerland: Potential for alleviation through reservoirs and lakes. Sci. Total Environ. 666, 1033–1047. https://doi.org/10.1016/j.scitotenv.2019.02.169.

This dataset contains the following information:

1.	Shapefile with the 307 medium-sized Swiss catchments.
2.   Textfiles with the water supply simulations for the control run and the 39 climate model chains (one file per chain) at daily resolution for the 307 catchments.
3.	Textfiles with the current and future demand estimates per category at monthly resolution for the 307 catchments.
4.	Textfiles with the storage volumes per category and catchment.

reservoirs

display_name: reservoirs

water-demand

display_name: water-demand

water-scarcity

display_name: water-scarcity

water-supply

display_name: water-supply

en: Hydro-CH2018 reservoirs


maintainer: Leo Gallus Bont

en: accessible-forest forest qgis openstreetmap geoprocessing seilaplan

en: Digitised sample perimeter

en: Preview

media_type: image/png

format: PNG

mimetype: image/png

en: Railways vector data (close to the sample forest range)

en: Power lines vector data (close to the area of the sample forest range)

en: Forest vector data (for sample forest range)

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en: Juypter Notebook for Data Preparation

media_type: ipynb

en: Juypter Notebook for Data Preparation (online)

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

forest

display_name: forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

education

en: Education and science

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019


en: wind-velocity wind-direction wind-speed anemometer raclets wind

en: Sonic wind component w

en:
The data contains values for w direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component v

media_type: npy

en:
The data contains values for v direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic temperature

en: The data set contains values of temperature (°C) measured with the anemometer at a sampling frequency of 20 Hz.

en: Sonic wind component u

en:
The data contains values for u direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic time

en: The data set contains the time in YYYY-mm-dd HH:MM:SS.sss for the anemometer data. The time is given in UTC+1.

en: A Young 81000 sonic anemomenter was deployed at Gotschnagrat (LON: 46.859 LAT: 9.849) to record three components of the wind velocity (u, v, w in [m s‾ ¹]) and air temperature (Ts in [°C]). The anemomenter was mounted in direction North at a height of 1.5 m above snow surface at the beginning. The time within each data set is given in UTC+1. Instrument specifications can be found [here](http://www.youngusa.com/Manuals/81000-90(I).pdf) .

anemometer

display_name: anemometer

raclets

display_name: raclets

wind

display_name: wind

wind-direction

display_name: wind-direction

wind-velocity

display_name: wind-velocity

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow Drift Station - 3D Ultrasonic


en: snow-water-equivalent snow-height snow-profile gcos snow

en: DATA ACCESS

media_type: CSV

en: STATION METADATA

media_type: text/plain

format: TXT

mimetype: text/plain

en: Snowprofile from 11 observer sites in Switzerland compiled for the Global Climate Observing System (GCOS). Height of snow (cm) and snow water equivalent (mm) are recorded every 2 weeks since the 1947 (depending on station). Attached metadata file gives details of each station.

gcos

display_name: gcos

snow

display_name: snow

snow-height

display_name: snow-height

snow-profile

display_name: snow-profile

snow-water-equivalent

display_name: snow-water-equivalent

education

en: Education and science

en: GCOS SWE data from 11 stations in Switzerland


maintainer: Matthias Haeni

en: swiss-forest-lab long-term par climate-change relative-humidity precipitation meteorology temperature wind-speed meteo

en: Data plot of the field station (NAF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Field station data (NAF)

en: Data file.

en: Site aerial photo (Nationalpark)

en: Site aerial photo from both Nationalpark stations. Source: Google. 2016. Site aerial photo from both Nationalpark stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Forest station data (NAB)

en: Data plot of the forest station (NAB)

en: Site photo of the forest station (NAB)

en: Site photo of the forest station from the side.

en: Site photo of the field station (NAF)

en: Site photo of the field station form the side.

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Nationalpark in Switzerland where one station is located within a natural coniferous forest stand (NAB) with mountain pine (_Pinus mugo_; 210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Nationalpark is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Nationalpark, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: model hydrology water-temperature discharge climate-change-impact

en: Data access

media_type: .zip

en:
This work presents the first extensive study of climate change impacts on rivers temperature in Switzerland. Results show that even for low emissions scenarios, water temperature increase will lead to adverse effect for both ecosystems and socioeconomic sectors (such as nuclear plant cooling) throughout the 21st century. For high emissions scenarios, the effect will be worsen. This study also shows that water warming in summer will be more important in Alpine regions than in lowlands.
This material is distributed under CC BY 4.0 license (https://creativecommons.org/licenses/by/4.0/legalcode).

climate-change-impact

display_name: climate-change-impact

discharge

display_name: discharge

hydrology

display_name: hydrology

model

display_name: model

water-temperature

display_name: water-temperature

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Dataset for: Future water temperature of rivers in Switzerland under climate change investigated with physics-based models


en: long-term relative-humidity par swiss-forest-lab meteo precipitation temperature meteorology wind-speed climate-change

en: Data plot of the forest station (SCB)

media_type: PDF

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Forest station data (SCB)

en: Data file.

en: Site photo of the forest station (SCB)

media_type: JPEG

en: Site photo of the forest station from below (viewing upwards the slope).

en: Data plot of the field station (SCF)

en: Site aerial photo (Schänis)

en: Site aerial photo from both Schänis stations. Source: Google. 2016. Site aerial photo from both Schänis stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Field station data (SCF)

en: Further details on the data repository

en: Meta data documentation.

en: Site photo of the field station (SCF)

en: Site photo of the field station from above (viewing downwards the slope).

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Schänis in Switzerland where one station is located within a natural mixed forest stand (SCB) with European beech (_Fagus sylvatica_; 130-150 yrs), European silver fir (_Abies alba_; 130-150 yrs) and European ash (_Fraxinus excelsior_; 130-150 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, SCF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Schänis is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

en: Schänis, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1998 onwards


maintainer: Thorsten Bartels-Rausch

en: metamorphism solution snow laboratory-study brine ozone antarctica arctic heterogeneous interface chemistry reaction alpine

en: Data Figure 1

media_type: dat

en: Data of published Figure

en: Matlab Data

media_type: mat

en: All data as Matlab mat file

en: Matlab Script to view and plot data

media_type: .m

en: Acetone data

en:
intensity of the acetone-water-cluster and water-cluster (as derived by a chemical ionisation mass spectrometer) with time in the carrier gas downstream of packed bed flow tube holding the snow sample or the by-pass, respectively. Time "0" denotes the time when the mass spectrometer data acquisition was started. When the carrier
gas with acetone was passed via the packed bed flow tube, that is switched from by-pass to pass the snow, acetone concentration in the carrier gas rapidly dropped due to surface adsorption and slowly recovered as the adsorption sites saturate. From this, the surface area can be obtained.

en: Ozone data

en: Trend of ozone mixing ratio ( _O3mixingRatio_ppb_ with time ( _time_s_ ) as measured downstream of the snow sample during the experiments. Time "0" denotes the time when data acquisition with ozone analyser was started. And, ozone (_nOzone_molec_per_s_ ) loss for each experiment with duration of ozone exposure ( _duration_s_ ) of ozone exposure, as derived from the ozone trends shown above. Time "0" denotes the time when the carrier gas with ozone was passed via the snow sample.

en: Readme file

en: This file shows data, code, and plots.

en: data list

en: Lists file names, snow sample properties, and flow settings for each data-set.

en: Earth’s snow cover is very dynamic on diurnal time scales. The changes to the snow structure during this metamorphism have wide ranging impacts such as on avalanche formation and on the capacity of surface snow to exchange trace gases with the atmosphere. Here, we investigate the influence of dry metamorphism, which involves fluxes of water vapor, on the chemical reactivity of bromide in the snow. For this, the heterogeneous reactive loss of ozone at a concentration of 5-6E12 molecules cm-3 is investigated in artificial, shock-frozen snow samples doped with 6.2 uM sodium bromide and with varying metamorphism history. The oxidation of bromide in snow is one reaction initiating polar bromine releases and ozone depletions.

alpine

display_name: alpine

antarctica

display_name: antarctica

arctic

display_name: arctic

brine

display_name: brine

chemistry

display_name: chemistry

heterogeneous

display_name: heterogeneous

interface

display_name: interface

laboratory-study

display_name: laboratory-study

metamorphism

display_name: metamorphism

ozone

display_name: ozone

reaction

display_name: reaction

snow

display_name: snow

solution

display_name: solution

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data set on bromide oxidation by ozone in snow during metamorphism from laboratory study


en: functional-taxonomic-groups functional-taxonomic-group liverwort photobiont bryophyte-life-strategy endemic-species disturbance bryophyte climate-change elevational-gradient lichen moss madeira-island lichen-growth-form climate-change-impact lichen-growthform endemic biodiversity

en: MadCrypto – Bryophyte and macrolichen diversity in laurel forests of Madeira

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science.

format: XLS

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science 30: 1122–1133.

The excel file contains 5 sheets:
1) Plot information
2) Bryophyte data with species specific information, separated per substrate
3) Macrolichen data with species specific information, separated per substrate
4) Bryophyte data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 2 and 4 might therefore differ slightly.
5) Macrolichen data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 3 and 5 might therefore differ slightly.

biodiversity

display_name: biodiversity

bryophyte

display_name: bryophyte

bryophyte-life-strategy

display_name: bryophyte-life-strategy

climate-change

display_name: climate-change

climate-change-impact

display_name: climate-change-impact

disturbance

display_name: disturbance

elevational-gradient

display_name: elevational-gradient

endemic

display_name: endemic

endemic-species

display_name: endemic-species

functional-taxonomic-group

display_name: functional-taxonomic-group

functional-taxonomic-groups

display_name: functional-taxonomic-groups

lichen

display_name: lichen

lichen-growth-form

display_name: lichen-growth-form

lichen-growthform

display_name: lichen-growthform

liverwort

display_name: liverwort

madeira-island

display_name: madeira-island

moss

display_name: moss

photobiont

display_name: photobiont


global-cryosphere-watch-data-survey

maintainer: Mathias Bavay

title_for_slug: global-cryosphere-watch-data-survey

en: gcw data-usage data-portal automatic-publication data-exchange

en: Data interoperability survey

en: Third party data usage

en: Two surveys on the topic of data usage where conducted for the Global Cryosphere Watch data portal. The first one focused on the data provider point of view while the second one focused on the data user point of view. 37 data providers (ie institutions) worldwide provided their answers for the first survey (from fall 2017 until summer 2018) while 54 users (contacted through various mailing list such as the Cryolist) answered the questions on their third party data usage (fall 2019 until January 2020).

automatic-publication

display_name: automatic-publication

data-exchange

display_name: data-exchange

data-portal

display_name: data-portal

data-usage

display_name: data-usage

gcw

display_name: gcw

en: Global Cryosphere Watch data survey


maintainer: Sebastian Schlögl

en: snow atmosphere stable-boundary-layer turbulent-sensible-heat-fluxes atmospheric-turbulence

en: Turbulence data WFJ07

en: lower sensor

en: Turbulence data GR00

en: sensor in 2 m height

en: Turbulence data AA00

en: sensor in 0.2 m height

en: Turbulence data PM07

en: NWW

en: SEE

en: upper sensor

en: sensor in 25 m height

en: sensor in 1 m height

en: Turbulence data WFJ11

en:
We used five different atmospheric turbulence datasets from four test sites, with these sites showing differences in their topographical characteristics. We chose one typical alpine test site with high topographical complexity (Weissfluhjoch, Davos, Switzerland) and three test sites consisting of one glacier site (Plaine Morte, Crans-Montana, Switzerland) and two polar sites (Greenland and Antarctica) representing a quasi-ideal site with homogeneous surface and quasi infinite fetch in all directions.
The turbulent sensible heat flux was calculated using the eddy-covariance method. Note that the sonic temperature fluctuations have been converted into virtual temperature fluctuations.
Three-dimensional wind velocity and air temperature were processed using a linear detrending (Rannik and Vesala, 1999) and a planar fit approach (Massmann and Lee, 2002) to rotate the coordinate system. Air temperature, relative humidity and air pressure from weather stations were used to calculate air properties, which are required for the data processing. The weather stations are located in the immediate vicinity of the turbulence tower and are affected by the same air masses. Turbulence data were averaged to 30-min intervals, whilst changing to a 15-min time interval marginally affects the heat fluxes at the Weissfluhjoch test site (Mott et al., 2011). Note that we define a negative sensible heat flux as being directed towards the snow surface and a positive sensible heat flux as being directed upwards.
The selected datasets and corresponding test sites are briefly introduced below:

Weissfluhjoch 2007 (WFJ07): A vertical set-up of two three-dimensional ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) was used at the traditional field site Weissfluhjoch (2540 m asl.) to measure three-dimensional wind velocity and air temperature at a frequency of 20 Hz. The sensors were mounted 3 m and 5 m above the ground and provided reliable data for 50 days between 11 February 2007 and 24 April 2007. Further information on the field campaign can be found in Stössel et al. (2010) and Mott et al. (2011).

Weissfluhjoch 2011-13 (WFJ11): Three-dimensional wind velocity and air temperature were recorded at 5 m above the ground at a frequency of 10 Hz with a three-dimensional ultrasonic anemometer (CSAT3). The analysis was conducted for data obtained between February and March in the years 2011-13.

Plaine Morte 2007 (PM07): Two three-dimensional ultrasonic anemometers (CSAT3) were installed on a horizontal boom facing opposite directions (west-north-west vs. east-south-east) at 3.75 m above the ground to measure air temperature and three-dimensional wind velocity at 20 Hz. The data were collected at the almost flat field site on the Plaine Morte glacier (2750 m asl.) near Crans-Montana, Switzerland from February to April 2007. High quality meteorological data were additionally recorded and used to force the model. A detailed description about the set-up at the Plaine Morte glacier can be found in Huwald et al. (2009) and Bou-Zeid et al. (2010).

Greenland 2000 (GR00): High-frequency three-dimensional ultrasonic anemometer measurements (CSAT3) were recorded at 50 Hz at the Summit Camp (72.3 °N, 38.8 °W, 3208 m asl.) located on the northern dome of the Greenland ice sheet. Data were collected at 1 m and 2 m above the snow surface during summer in 2000 and 2001. Additionally, meteorological measurements were obtained for the post processing and used to force the model. More information about the field campaign can be found in Cullen et al. (2007, 2014).

Antarctica 2000 (AA00): A set-up of three vertical three-dimensional ultrasonic anemometers (DA-600, Kaijo Denki) were installed at Mizuho Station (70°42' S, 44°20' E, 2230 m asl.) in Eastern Antarctica at 0.2, 1 and 25 m and recorded turbulence data at a frequency of 100 Hz from October to November 2000. Longwave and shortwave radiation, relative humidity, air and snow surface temperature were additionally measured and used to force the model. More information about the field campaign can be found in Nishimura and Nemoto (2005).

atmosphere

display_name: atmosphere

atmospheric-turbulence

display_name: atmospheric-turbulence

snow

display_name: snow

stable-boundary-layer

display_name: stable-boundary-layer

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

en: How do stability corrections perform in the stable boundary layer over snow?


maintainer: Loïc Pellissier Pellissier

en: herbivores-communities community-indices alps elevation environmental-gradients functional-traits plant-herbivore-interactions

en: Study sites

en: Coordinates and elevation of the study sites

en: Orthoptera traits

en: Orthoptera functional traits (incisive mandibular strength averaged by species)

en: Orthoptera surveys

en: Species inventories of Orthoptera

en: Plant traits

en: Plant functional traits (SLA, LDMC, carbon and nitrogen content, punch strenght; averaged by species)

en: Nematode surveys

en: Surveys of soil nematode along elevation

en: Vegetion surveys

en: Species inventories of plants

en: Despite the common role of above- and below-ground herbivore communities in mediating ecosystem functioning, our understanding of the variation of species communities along natural gradient is largely strongly biased toward aboveground organisms. This dataset enables to study the variations in assemblages of two dominant groups of herbivores, namely, aboveground orthoptera and belowground nematodes together with their food plants. Herbivores and plant surveys were conducted in 48 natural grasslands along six elevation gradients, selected to span the major macro-climatic and environmental conditions of the Swiss Alps. It compiles herbivores and plant surveys, information on the study sites as well as plant and herbivores functional traits sought to be involved in trophic interactions and to respond to climatic variation along the elevation. Plant functional traits considered are the SLA, the LDMC, the C/N content, the punch strength (i.e. force required to pierce the leave lamina), the mandibular strength for Orthoptera insect. Data were collected during the summer 2016 and 2017.

alps

display_name: alps

community-indices

display_name: community-indices

elevation

display_name: elevation

environmental-gradients

display_name: environmental-gradients

functional-traits

display_name: functional-traits

herbivores-communities

display_name: herbivores-communities

plant-herbivore-interactions

display_name: plant-herbivore-interactions

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Above- and below-ground herbivore communities along elevation


causal-effect-of-mfoz

title_for_slug: causal-effect-of-mfoz

en: built-up-land-change fujian-province propensity-score-matching causality selection-bias the-major-function-oriented-zone

en: Data and Stata code for repeating the results

media_type: ZIP

en:
Data.xlsx is the variables of 952 townships
Table 1-2 NN(1-1)_noreplace_caliper(0.01).do is STATA code to produce the results in Table 1 and 2
Figure 5 Distribution of the propensity scores.R is R code rto produce Figure 5
Figure 5 Standard mean difference.R is R code rto produce Figure 5

en:
Title: Closer to causality: How effective is spatial planning in governing built-up land expansion in Fujian Province, China?

Research objective: The Major Function Oriented Zone (MFOZ), the first strategic spatial plan in China, is developed to achieve a coordinated regional development, through spatial regulation and zoning of development. The MFOZ he MFOZ divided land into four major function-oriented zones: The development-optimized zone, the development-prioritised zone, the development-restricted zone, and the development-prohibited zone. We used propensity score marching to evaluate the effect of the MFOZ on built-up land expansion in Fujian Province over three time intervals (2013–2015, 2013–2018 and 2013–2020).

Data: Data.xlsx contains the variables of 954 towns in Fujian Province.
Town_ID is the town unique ID;
County_ID is the county unique ID;
City_ID is the city unique ID;
MFOZ is the the development-prioritised zone and the development-restricted zone (The development-optimized zone and the development-prohibited zone are excluded);
Builtup_13_15 is the built-up land expansion from 2013 to 2015;
Builtup_13_18 is the built-up land expansion from 2013 to 2018;
Builtup_13_20 is the built-up land expansion from 2013 to 2020;
Dis2water is the Euclidean distance from the town to the nearest waterbody;
Slope is the the average slope within the town;
GDP is the average GDP in 2010 within the town;
Pop is the average population in 2010 within the town;
Road is the average population in 2010 within the town;
Dis2city is the Euclidean distance from the town to the nearest prefectural city centre;
Nei_Arable, Nei_Forest, and Nei_Built.up are the area of arable land, forest land, and built-up land neighbouring town i in 2010.

Method: we used the propensity score matching to compare the changes in the amount of built-up land in the towns of the development-prioritised zone with the matched towns of the development-restricted zone. Additionally, we used three evaluation intervals (2013–2015, 2013–2018 and 2013–2020) to evaluate temporal variation in the causal effect of the MFOZ on built-up land expansion.

built-up-land-change

display_name: built-up-land-change

causality

display_name: causality

fujian-province

display_name: fujian-province

propensity-score-matching

display_name: propensity-score-matching

selection-bias

display_name: selection-bias

the-major-function-oriented-zone

display_name: the-major-function-oriented-zone

en: Causal effect of MFOZ


maintainer: Benjamin Reuter

en: avalanche-problem-type avalanche-danger snow snow-instability snowpack avalanche crocus avalanche-activity weissfluhjoch snow-cover-modeling

en: 1999-2017 Avalanche problem types from Crocus

media_type: .csv

en:
Avalanche problem types were derived from snow cover simulations with the model Crocus at the Weissfluhjoch study plot, Davos, CH.
The data cover the winter seasons between 1999-2017 and include the simulated annual frequencies of new snow, wind slab, persistent weak layer, aging-persistent weak layer and wet snow problem types.
The data are presented in Figure 8 in Reuter et al. (2021).

en: 2015-2016 Avalanche problem types from SNOWPACK

en:
Avalanche problem types were derived from a snow cover simulation with the model SNOWAPCK for the winter season 2015-2016 at the Weissfluhjoch study plot, Davos, CH.
The data cover the period 01.01.2016-30.04.2016. The binary indicator (0,1) tells whether an avalanche problem type was identified in the snow cover simulation (1) or not (0).
The data are presented in Figure 7 in Reuter et al. (2021).

en: 2015-2016 Avalanche problem types from Crocus

en:
Avalanche problem types were derived from a snow cover simulation with the model Crocus for the winter season 2015-2016 at the Weissfluhjoch study plot, Davos, CH.
The data cover the period 01.01.2016-30.04.2016. The binary indicator (0,1) tells whether an avalanche problem type was identified in the snow cover simulation (1) or not (0).
The data are presented in Figure 7 in Reuter et al. (2021).

en: 2015-2016 Seismic avalanche acitivity catalogue

en:
Avalanches were indentified in seismic data recorded by two seismic arrays, one deployed at Wannengrat (2,500 m) and another one deployed in the Dischma valley (2,000 m).
The data cover the period from 01.01.2016 - 30.04.2016 and are presented in Figure 7 in Reuter et al. (2021).

en: 1999-2017 Avalanche problem types from SNOWPACK

en:
Avalanche problem types were derived from snow cover simulations with the model SNOWPACK at the Weissfluhjoch study plot, Davos, CH.
The data cover the winter seasons between 1999-2017 and include the simulated annual frequencies of new snow, wind slab, persistent weak layer, aging-persistent weak layer and wet snow problem types.
The data are shown in Figure 8 in Reuter et al. (2021).

en:
Avalanche problem types were derived from snow cover simulations with the models Crocus and SNOWPACK at the Weissfluhjoch study plot, Davos, CH. The data include annual frequencies of avalanche problem types for the seasons 1999-2017 and daily presence of avalanche problem types for the period 01.01.2016 - 30.04.2016.
Avalanche activity was derived from two seismic sensor arrays deployed no further than 15 km from Weissfluhjoch, Davos, CH. The data cover the period 01.01.2016 - 30.04.2016.

avalanche

display_name: avalanche

avalanche-activity

display_name: avalanche-activity

avalanche-danger

display_name: avalanche-danger

avalanche-problem-type

display_name: avalanche-problem-type

crocus

display_name: crocus

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

snowpack

display_name: snowpack

weissfluhjoch

display_name: weissfluhjoch

en: Simulated avalanche problem types and seismic avalanche activity around Weissfluhjoch


maintainer: Elisabeth Hafner

en: avalanche hazard-mapping satellite snow natural-hazard

en: SPOT6 Avalanche Outlines 16 January 2019

media_type: SHP

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset and within the limitations of the dataset described in the publications.

format: SHP

en:
Outlines of 6'041 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 16 January 2019. The dataset was acquired following a period with very high avalanche danger. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping16012019.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

The data was comprehensivly validated in a subset area in

Hafner, E.D.; Techel, F.; Leinss, S.; Bühler, Y., 2021: Mapping avalanches with satellites - evaluation of performance and completeness. Cryosphere, 15, 2: 983-1004. doi: 10.5194/tc-15-983-2021

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: SPOT6 Avalanche outlines 16 January 2019


en: trichopria-drosophilae nuclear-microsatellite-markers simple-sequence-repeats drosophila-suzukii switzerland population-genetics biological-control multilocus-genotypes

media_type: text/csv

en: Multilocus genotypes (biallelic coding for 21 nuclear microsatellites) of Trichopria drosophilae described in Gugerli et al. Agrarforschung Schweiz 2019. Missing data denoted as '999'. Population codes (PopNo) are the following: 1, Vezia; 3, Contone ; 5, Davesco; 6, Corteglia; 7, Mezzana; 8, Stabio; 9, Gordola; 10, Sementina; 12, Brusata di Novazzano; 14, Monteggio; 16, Giubiasco; 17, ComoBP; 18, VD; 19, Weil_D; 20, Dossenheim; 21, BioPlanet_Como. Coordinates (CoordCH_E, CoordCH_N) refer to the Swiss coordinates system CH1903.

en: Table comprising all pertinent information for multiplex PCRs of species-specific nuclear microsatellite makers for Trichopria drosophilae, comprising all 21 newly developed markers, details on full sequences with GenBank accession numbers, primer sequences (including labeling and pig-tails), and repeat motives. PCRs with respective annealing temperatures (AnnealingTemp) refer to Type-It Multiplex PCR Kit (Qiagen, Hilden, Germany).

en:
 Nuclear microsatellite markers and genotype data for _Trichopria ddrosophilae_

This data set comprises (i) the characteristics of a set of 21 species-specific nuclear microsatellites for PCR amplification in _Trichopria drosophilae_ (ii) and genotype data for samples collected in southern Switzerland (Canton of Ticino), with few reference samples from Canton of Vaud, southern Germany, and northern Italy (lab-reared population).
Markers were developed by Ecogenics GmbH, Balgach (Switzerland), using MiSeq Nano 2x250 v2 format (on a mix of 10 individuals). Multiplex PCR assays for multilocus genotyping were established by Ecological Genetics (WSL Birmensdorf), and population genetic analyses are found in Gugerli et al., Agrarforschung Schweiz 2019.

biological-control

display_name: biological-control

drosophila-suzukii

display_name: drosophila-suzukii

multilocus-genotypes

display_name: multilocus-genotypes

nuclear-microsatellite-markers

display_name: nuclear-microsatellite-markers

population-genetics

display_name: population-genetics

simple-sequence-repeats

display_name: simple-sequence-repeats

switzerland

display_name: switzerland

trichopria-drosophilae

display_name: trichopria-drosophilae

en: Nuclear microsatellite markers for Trichopria drosophilae, parasitoid wasp on Drosophila suzukii


snow-drift-station-micro-rain-radar

title_for_slug: snow-drift-station-micro-rain-radar

en: raclets snow rain radar precipitation mountain

en: MRR data Period 2

media_type: application/zip

en: The dataset contains measurements between March 5 and March 8, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: MRR data of period 3

en: The dataset contains measurements between March 8 and March 13, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: Parameter MRR

media_type: application/pdf

en: The PDF contains additional information on parameters which were set for the certain time periods (time in UTC).

en: MMR Data Period 1

en: The dataset contains measurements between March 1 and March 5, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: MRR data of period 4

en: The dataset contains measurements between March 13 and March 22, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: The instrument (MRR, Metek) was mounted at Gotschnagrat (LON: 46.859 LAT: 9.849) at a height of 1 m above snow surface (at the beginning of the campaign) with an orientation of 22° with respect to North and a horizontal viewing direction. The sampling time was either 5 s or 10 s, depending on the settings at the specific period. The MRR produces standard outputs like radar reflectivity, doppler velocity, etc., and additional information can be found [here](https://metek.de/de/product/mrr-2/).

mountain

display_name: mountain

precipitation

display_name: precipitation

raclets

display_name: raclets

radar

display_name: radar

rain

display_name: rain

en: Snow Drift Station - Micro Rain Radar


maintainer: Océane Hames

en: mosaic snow-deposition openfoam snow-transport arctic-sea-ice

en: snowBedFoam 1.0.

en:
OpenFOAM-2.3.0. scripts containing the implemented Eulerian-Lagrangian snow transport model.

The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en: Paper Draft

en: This is the initial draft of the paper where the snowBedFoam 1.0. results are tested against Terrestrial Laser Scan (TLS) measurements of snow dynamics on Arctic sea ice (MOSAiC expedition). It highlights the numerical limitations of our model as well as the measurement uncertainties, which may occur in such extreme environments.

en: MOSAiC Met City preliminary (Level 2) wind data

media_type: zip-compressed folder of csv

en:
Extract from the preliminary MOSAiC atmospheric data (Level 2) for the time period 6th to 13th of November, 2019.
This data was used to set up the fluid forcing parameters in the snowBedFoam simulations on MOSAiC sea ice. It is being published in this repository with the kind permission from Matthew Shupe and his team.
The final processed and quality controlled version of this dataset (Level 3) has not been published yet. A complete reference will be added in this description once it is released.

en:
snowBedFoam 1.0. is a snow transport solver implemented in the Computational Fluid Dynamics (CFD) software OpenFOAM. It is adapted from the standard multi-phase flow solver DPMFoam for application in snow-influenced environments.

To simulate aeolian snow transport, snowBedFoam 1.0. handles coupled Eulerian–Lagrangian phases, which involve a finite number of particles (snow) spread in a continuous phase (air). The snow erosion and deposition are modelled through physically-based equations such as the ones employed in the well-established LES-Lagrangian Stochastic Model (Comola and Lehning, 2017 ; Sharma et al., 2018). This modelling approach is computationally intensive and thus adapted to simulate snow movement and distribution on small scale terrain.

snowBedFoam 1.0. was tested against topographical data collected on Arctic sea ice during the MOSAiC expedition (Clemens-Sewall, 2021) . Together with atmospheric data from the MOSAiC Met City (Shupe et al., 2021) used for the fluid forcing, the model was able to accurately simulate the zones of erosion and deposition of snow along a complex ice ridge structure.

The core code of snowBedFoam 1.0. is also accessible on the WSL/SLF GitLab repository (more details in the Resources section).

arctic-sea-ice

display_name: arctic-sea-ice

mosaic

display_name: mosaic

openfoam

display_name: openfoam

snow-deposition

display_name: snow-deposition

snow-transport

display_name: snow-transport

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: snowBedFoam: an OpenFOAM Eulerian-Lagrangian solver for modelling snow transport


wind-crust-formation-snowmicropen-data

title_for_slug: wind-crust-formation-snowmicropen-data

en: snowmicropen snow smp wind-packing wind-crust

en: Processing scripts

en: Contains the R-scripts used to process the SMPs

en: README

en: Describes the dataset in detail

en: SMP data

media_type: Link

en: Links to the dataset

en:
This dataset contains the SnowMicroPen (SMP) data from 38 wind tunnel experiments on wind-packing / wind crust formation. These experiments were performed in the winters 2015/16 and 2016/17 and include more than 1000 SMP measurements.

The SMPs are organized per experiment. Each experiment subfolder contains the processed SMP profiles and some additional files.

Please refer to the README for more details on the data. The processing scripts are available for download as well. The scripts are mainly provided as documentation and would need to be adjusted to be used.

This dataset is the basis of the following publication:

Sommer C.G., Lehning M., & Fierz C. (2017). Wind tunnel experiments: Saltation is necessary for wind-packing. Journal of Glaciology, 63(242), 950-958. doi:10.1017/jog.2017.53

smp

display_name: smp

snow

display_name: snow

snowmicropen

display_name: snowmicropen

wind-crust

display_name: wind-crust

wind-packing

display_name: wind-packing

en: Wind crust formation: SnowMicroPen data


maintainer: Michael Lehning

en: Data Source

media_type: R

en: Hourly Gridded Wind Power Time Series

en: Coordinates of Grid Points

en: Description

en: Full Data Description

en:
This dataset consist of simulated hourly power production from an Enercon E82 Turbine at 100 m hub-height. It describes the hourly power output a 1MW turbine would produce in each 0.01° grid cell for the years 2016 and 2017.

100 m wind speed data was taken from the COSMO-1 model (Consortium for Small-scale Modeling 2017), which has a 0.01° horizontal resolution. The domain covered is the whole of Switzerland, with the exclusion of lakes. As such, the number of 0.01◦ pixels within Switzerland amounts to 48657.
Conversion to power output was done based on the power curve of the Enercon E82 Turbine. As power output is lower at altitude due to lower air density, we corrected for this effect as described in (Kruyt et al. 2017).

Please cite the following paper in connection with the dataset:

Paper Citation:
 > _Bert Kruyt, Jérôme Dujardin, and Michael Lehning: Improvement of wind power assessment in complex terrain: The case of COSMO-1 in the Swiss Alps, Front. Energy Res., [doi:10.3389/fenrg.2018.00102] (https://doi.org/10.3389/fenrg.2018.00102)_

mountain-wind-potential

display_name: mountain-wind-potential

topography

display_name: topography

wind-energy

display_name: wind-energy

en: Dataset on Cosmo-1 based Energy Potential in Swiss Alps


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: soil-moisture davos dischma-catchment meteorological-measurements meteo-station

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: IRKIS Soil moisture measurements Davos


en: air-temperature minimum-temperature timeseries free-climate-data climate-layers maximum-temperature century precipitation climate

en: CHELSA Technical Documentation

en: As the CHELSA project is continuously expanded, certain new parameters, time scales etc. are not included anymore in the original publication (Karger et al. 2017). We are therefore provide this document as a guideline of the current climatic parameters available and will expand it as new parameters or time periods will become available. Please refer to the version history for changes made in the document.

en: Data Access

media_type: geotiff

format: GeoTIFF

en:
CHELSAcruts is a delta change monthly climate dataset for the years 1901-2016 for mean monthly maximum temperatures, mean monthly minimum temperatures, and monthly precipitation sum. Here we use the delta change method by B-spline interpolation of anomalies (deltas) of the CRU TS 4.01 dataset. Anomalies were interpolated between all CRU TS grid cells and are then added (for temperature variables) or multiplied (in case of precipitation) to high resolution climate data from CHELSA V1.2 (Karger et al. 2017, Scientific Data). This method has the assumption that climate only varies on the scale of the coarser (CRU TS) dataset, and the spatial pattern (from CHELSA) is consistent over time. This is certainly a rather crude assumption, and for time periods for which more accurate data is available CHELSAcruts should be avoided if possible (e.g. use CHELSA V1.2 for 1979-2015). Different to CHELSA V1.2, CHELSAcruts does not take changing wind patterns, or temperature lapse rates into account, but rather expects them to be constant over time, and similar to the long term averages.

CHELSAcruts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

century

display_name: century

climate

display_name: climate

climate-layers

display_name: climate-layers

free-climate-data

display_name: free-climate-data

maximum-temperature

display_name: maximum-temperature

minimum-temperature

display_name: minimum-temperature

precipitation

display_name: precipitation

timeseries

display_name: timeseries

en: CHELSAcruts -  High resolution temperature and precipitation timeseries for the 20th century and beyond


en: ground-temperature sdms soil aridity frost-change-velocity precipitation

media_type: TIFF

en: Frost change frequency modified from CHELSA

en: Soil clay content modified from SoilGrids

media_type: tif

en: Precipitation seasonality from CHELSA

en: Precipitation of driest quarter modified from CHELSA

en: Mean annual temperature modified from CHELSA

en: Mean diurnal range modified from CHELSA

en: Soil organic carbon content modified from SoilGrids

en: Soil pH modified from SoilGrids

en: The dataset contains seven environmental layers (average annual temperature, aridity [annual precipitation divided by annual potential evapotranspiration], frost change frequency, precipitation in the driest quarter, mean diurnal temperature range, and precipitation seasonality) modified from CHELSA (https://chelsa-climate.org/) and three soil layers (soil organic matter content, pH water, and clay content) modified from SoilGrids (https://soilgrids.org/).

aridity

display_name: aridity

frost-change-velocity

display_name: frost-change-velocity

ground-temperature

display_name: ground-temperature

sdms

display_name: sdms

soil

display_name: soil

en: Environmental layers for SDM simulations (GDPlants)


maintainer: Roksolana Petrovska

en: mortality-rate regeneration shade-tolerance acer lar fagus dominance

media_type: r script (flat-ascii text)

en: The R-script of survival analysis for accelerated failure time model

en: Mortality of regeneration

media_type: CSV

en: Acer platanoides, Acer pseudoplatanus and Fagus sylvatica living and dead juveniles (0-500 cm in height) grown in the deep shade of a prime beech-dominated forest.

en:
 One individual per species, vitality class (low and high) and height class (eight classes: 0–10, 11–20, 21–35, 36–60, 61–90, 91–130, 131–200 and 201–500 cm) was randomly selected and harvested in each of the six plots. This resulted in a sample of 82, 80 and 89 living individuals of A. platanoides, A. pseudoplatanus and F. sylvatica, respectively.

 Additionally stems of dead Acer spp. and F. sylvatica trees that had died within the last three years (2015–2018) were randomly harvested, matching the height classes of the harvested living trees wherever possible. In total, 179 dead young trees (60 A. platanoides, 72 A. pseudoplatanus and 47 F. sylvatica) were collected.

 Variables:
* species_code: a_pla - Acer platanoides, a_pse - Acer pseudoplatanus, f_syl - Fagus sylvatica
* species: as above
* dummy: 0 - living individual, 1 - dead individual
* LAR_cm2_g: leaf area ratio or ratio of leaf area to total plant biomass, [cm2/g]
* tree_age: in years
* avg_ring_micron: average width of the last 5 rings in tree life excluding the last ring
* dry_mass_g: aboveground and belowground biomass
* DLI: direct light index (measured only under living individuals)
* BLI: diffuse light index (measured only under living individuals)
* GLI: global light index

acer

display_name: acer

dominance

display_name: dominance

fagus

display_name: fagus

lar

display_name: lar

mortality-rate

display_name: mortality-rate

regeneration

display_name: regeneration

shade-tolerance

display_name: shade-tolerance

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Mortality of regeneration: Acer spp. and Fagus sylvatica


sensitivity-of-modeled-snow-instability

maintainer: Bettina Richter

title_for_slug: sensitivity-of-modeled-snow-instability

en: numerical-avalanche-forecasting snow-cover-modeling global-sensitivity-analysis snow-instability snowpack

en: Reference run

en: Reference run for the sensitivity analysis at Weissfluhjoch field site for winter season 2016-2017. Meteorological data from the automatic weather stations are used. No biases were introduced to the input data.

en: Case SL

en: Extracted output data for case SL. Here biases were introduced to meteorological input data during the period of slab formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Case WL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the period of weak layer formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Case ALL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the whole simulation period. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Manually observed snow profiles

en: Manually observed snow profiles at Weissfluhjoch field site for winter season 2016-2017, including layer depth, hand hardness, grain size and grain shape for each layer.

en: We investigated the sensitivity of modeled snow instability to meteorological input data using SNOWPACK. We therefore used input data from the automatic weather station at the Weissfluhjoch field site for the year 2016-2017. We investigated three scenarios and performed 14'000 simulations for each scenario. The dataset contains extracted output data from modeled SNOWPACK simulations, including setup files to reproduce the simulations. For further information read the README file.

global-sensitivity-analysis

display_name: global-sensitivity-analysis

numerical-avalanche-forecasting

display_name: numerical-avalanche-forecasting

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

snowpack

display_name: snowpack

en: Sensitivity of modeled snow instability


en: wolf carrion biogeochemical-cycling carcass soil-biodiversity decomposition fungi detritus yellowstone bacteria

en:
Site	ID for different carcasses across the Yellowstone Landscape
Location	Sampling location, either under carcass or control plot
Species	Indicating whether carcass was from bison or elk
Gender	Gener of carcass; F = female, M = male, ? = unknown
Lat	Latitude
Long	Longitude
DSK	Days since kill; in days
Soil.N	Soil N concentration (%)
Soil.C	Soil C concentration (%)
Veg.C	Vegetation C concentration (%); dominant grasses sampled
Veg.N	Vegetation N concentration (%); dominant grasses sampled
Veg.CtoN	Vegetation C to N ratio; dominant grasses sampled
Soil.resp	Soil respiration (g m-2 h-1)
soil.temp	Soil temperature (°C)
Soil.moist	Soil moisture (volumentric; %)
CRR	Cotton rotting rate
bacteria.richness	Bacteria richness
bacteria.diversity	Bacteria diverstiy
fungi.richness	Fungi richness
fungi.diversity	Fungi diversity
bacteria.abundance	Bacteria abundance
fungi.abundance	Fungi abundance

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch, A.C., Frossard, A., Schütz, M., Frey, B., Morris, A.W., Bump, J.K. (accepted) Effects of elk and bison carcasses on soil microbial communities and ecosystem functions in Yellowstone, USA. (accepted). Functional Ecology
doi: ...

Methods
Study area and study sites
This study was conducted in YNP’s Northern Range (NR), located in north-western Wyoming and south-western Montana, USA (~44.9163° N, 110.4169° W). The NR expands over ~1000 km2 and features long cold winters and short dry summers. Grasslands and shrublands dominate the NR that is the home of large migratory herds of bison (winter counts 2017: ~3919 individuals; Geremia, Wallen, & White, 2017) and elk (~5349 individuals) as well as their main predators, approximately five packs of wolves with a total of 33 individuals (Smith et al., 2017). As part of a long-term research program within YNP, wolf predation has been studied since their reintroduction in 1995.
For our study, we received ground-truthed coordinates of bison and elk carcasses from winter 2016/17 (November 2016 through April 2017) from the YNP Wolf Project. Between June 20 and July 1, 2017, we visited 24 carcasses in total. At five sites, we could not sample as the carcasses were no longer found. In total we located remains (hairmats, rumen content, bones, teeth) of 19 adult male and female carcasses (7 bison, 12 elk; Supplementary Table 1). Live body weights of adult bison and elk are approximately 730 kg (male bison), 450 kg (female bison), 330 kg (male elk), and 235 kg (female elk, Meagher, 1973; Quimby & Johnson, 1951).
The kills and subsequent consumption happened between 34 and 173 days prior to our sampling (hereafter “days since kill”, DSK), for which we accounted in our statistics. Note that wolves and other scavengers consumed the soft tissue of the carcasses quickly, hence, there is close to no soft tissue left for decomposition as compared to an intact body left on the soil surface. The 19 carcass sites covered the extent of YNP’s NR, with both bison and elk carcasses showing similar distributions; elevation ranged from 1703 to 2884 m a.s.l. (Supplementary Fig 1 & Supplementary Table 1). The carcasses were all located in grassland or sage-brush shrubland, with or without sparsely scattered trees, and both bison and elk carcasses showed the same distribution of DSK. At each study site, we selected a reference plot (hereafter “control”) that was of comparable size, slope aspect and vegetation to the carcass location (hereafter “carcass”). The control was at least 10 m away (Danell, Berteaux, & Brathen, 2002; Melis et al., 2007) from the carcass itself to ensure the absence of potential direct and indirect carcass effects (paired design; (Bump, Webster, et al., 2009; Bump, Peterson, et al., 2009).

Ecosystem functions and soil properties
We randomly collected 50 g of mineral soil from three locations on both control and carcass plots to a depth of 5 cm with sterile techniques and gently mixed the material to obtain a composite sample. Half the soil sample was immediately bagged in plastic bags (whirl packs), stored in a cooler with ice packs (~5 ºC), sieved (2-mm) and frozen within 4-6 hours of collection to assess soil microbial communities. For this purpose, we extracted total genomic DNA from 0.5 g soil using the PowerSoil DNA Isolation Kit (Qiagen, Hilden, Germany). DNA concentrations were measured using PicoGreen (Molecular Probes, Eugene, OR, USA). PCR amplifications of partial bacterial small-subunit ribosomal RNA genes (region V3–V4 of 16S rRNA) and fungal ribosomal internal transcribed spacers (region ITS2) were performed as described previously (Frey et al., 2016). Each sample consisting of 40 ng DNA was amplified in triplicate and pooled before purification with Agencourt AMPure XP beads (Beckman Colter, Berea, CA, USA) and quantified with the Qubit 2.0 fluorometric system (Life Technologies, Paisley, UK). Amplicons were sent to the Genome Quebec Innovation Center (Montreal, Canada) for barcoding using the Fluidigm Access Array technology and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, CA, USA).
Quality control of bacterial and fungal reads was performed using a customized pipeline (Supplementary Table 2; Frey et al., 2016). Paired-ends reads were matched with USEARCH (Edgar & Flyvbjerg, 2015), substitution errors were corrected using Bayeshammer (Nikolenko, Korobeynikov, & Alekseyev, 2013) and PCR primers were trimmed (allowing for 1 mismatch, read length >300 bp for 16S and >200 bp for ITS primers) using Cutadapt (M. Martin, 2011). Sequences were dereplicated and singleton reads removed prior to clustering into operational taxonomic units (OTUs) at 97% identity using USEARCH (Edgar, 2013). The remaining centroid sequences were tested for the presence of ribosomal signatures using Metaxa2 (Bengtsson-Palme et al., 2015) or ITSx (Bengtsson-Palme et al., 2013). Taxonomic assignments of the OTUs were obtained using Bayesian classifier (Wang, Garrity, Tiedje, & Cole, 2007) with a minimum bootstrap support of 60% implemented in mothur (Schloss et al., 2009) by querying the bacterial and fungal reads against the SILVA Release 128 (Quast et al., 2013) and UNITE 8.0 (Abarenkov et al., 2010) reference databases for 16S and ITS OTUs, respectively.
Abundances of the bacterial 16S rRNA gene and fungal ITS amplicon were determined by quantitative real-time PCR (qPCR) on an ABI7500 Fast Real-Time PCR system (Applied Biosystems, Foster City, CA, USA) as described previously (Frossard et al., 2018). The same primers (without barcodes) and cycling conditions as for the sequencing approach were used for the 16S and ITS qPCR. Three standard curves per target region were obtained using tenfold serial dilutions of plasmids generated from cloned targets (Frey, Niklaus, Kremer, Lüscher, & Zimmermann, 2011). Data were converted to represent mean copy number of targets per gram of soil (dry weight).
The other half of the soil sample was bagged in paper, dried to constant weight at 60°C, passed through a 2 mm sieve and analyzed for total C and N concentration with a CE Instruments NC 2100 soil analyzer (CE Elantech Inc., Lakewood NJ, USA). We also collected 20 mature and undamaged leaves of the dominant grass species growing on control and carcass sites, but taxa were not recorded. The plant material was dried at 60°C, finely ground till homogenized and also analyzed to obtain total C and N concentrations. Soil temperature (10 cm depth) was measured with a waterproof digital thermometer (Barnstead International, Dubuque IA, USA) at three locations each at the control and carcass site. Soil moisture (0 – 10 cm depth) was measured with time domain reflectometry (Field-Scout TDR-100; Spectrum Technologies, Plainfield IL, USA) at five randomly chosen points on control and carcass sites. We measured soil respiration at five randomly chosen points at both control and carcass sites with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA). For each measurement the soil chamber (15 cm high; 10 cm diameter) was tightly placed on the soil surface, after clipping plants to avoid measuring plant respiration or photosynthesis. Measurements were conducted over 120 s.
In addition, we assessed the decomposition rates of standardized OM using the cotton strip assay (Latter & Howson, 1977; Latter & Walton, 1988). Cotton cloth tensile strength loss (CTSL) is a measure of decomposition, and an index to express the combined effect of soil microclimatic, physical, chemical and biological properties on decomposition while accounting for OM quality (Latter & Walton, 1988; Risch, Jurgensen, & Frank, 2007; Withington & Sanford Jr., 2007). We placed five 20 cm wide x 13 cm long sheets of 100% unbleached cotton cloth (American Type SM 1/18’’, Warp: 34/1, Weft: 20/1, Weave plain, 29.5 picks/cm warp, 22 picks/cm weft, 237 g/m2; Daniel Jenny & Co., Switzerland;) at each carcass and control site vertically into the soil by making slits with a flat spade to a depth of 12 cm. We inserted each cloth with the spade, and then pushed the slit closed to assure tight contact with the soil. The cloths were retrieved after 18 to 27 days. After retrieval, the cloths were air-dried, remaining soil gently removed by hand, and 1.5 cm wide strips were cut at the 3.5-5.0 cm (top) and the 9-10.5 cm (bottom) soil depth. The strips were equilibrated at 50 % relative humidity and 20°C for 48 hours (climate chamber) prior to strength testing (Scanpro Awetron TH-1 tensile strength tester; AB Lorentzen and Wettre, Kista, Sweden). Cotton rotting rate (CRR) = (CTScontrol - CTSfinal/CTSfinal)1/3 * (365/t), where CTScontrol is the cotton tensile strength of a control cloth and CTSfinal the cotton tensile strength of the incubated sample, t is the incubation period in days. Control cloths were inserted into the ground and immediately retrieved to account for tensile strength loss associated with cloth insertion. We averaged the CRR of top and bottom strips for further analyses as no difference was found between the two. All sampling and cloth insertion took place between June 20 and July 1, 2017, cloths were retrieved between July 17 and 20, 2017. Soil respiration, average CRR, vegetation N concentration and vegetation C:N ratio are defined as ecosystem functions, soil C and N concentration, soil temperature and moisture as soil abiotic properties, and bacterial and fungal richness (number of taxa), diversity (Shannon) and abundance as soil biotic properties.

Statistical analyses
Univariate analyses for ecosystem functions, soil biotic and abiotic properties
We tested whether individual ecosystem functions, soil biotic and abiotic properties differed between carcass and control (“Location”), bison and elk (“Species”) and days since kill (“DSK”). For this purpose, we used linear mixed effect models (LMM, “nlme” package v 3.1 – 131.1 in R v 3.4.4; Pinheiro, Bates, DebRoy, & Sarkar, 2018; R Core Team, 2019) with Location, Species, Location x Species and DSK as fixed effects. Site was included as random effect to account for the paired design. We developed a separate model for all dependent variables. All but bacterial richness, fungal richness, fungal diversity and vegetation N concentration were natural-log transformed to meet model assumptions. For each LMM, we calculated contrasts to assess the specific comparisons we were interested in with the “lsmeans” package v 2.27-62 (Lenth & Love, 2018): 1) carcass vs control, 2) carcass bison vs control bison, and 3) carcass elk vs control elk. We also tested whether we had differences between bison and elk carcasses or the sites where bison and elk were killed and included contrasts 4) carcass bison vs carcass elk and 5) control bison vs control elk.
We calculated the log response ratio (LRR = ln[carcass/control]) to obtain carcass effects for all variables for both species separately. LRR < 0 indicates higher value at control compared to carcass, LRR > 0 indicates higher values at carcass compared control. We used LRRs for visualization and to assess spatial patterns in carcass effects across YNP. For this purpose we calculated the Moran’s I statistic for each ecosystem function, soil biotic and abiotic property based on a latitude-longitude matrix with the “moran.test” function in the “spdep” package version 1.1-3 (Bivand et al., 2019).
Multivariate analyses
Rare OTUs, defined as OTUs with a low abundance of reads, were retained in multivariate methods because they only marginally influence these analyses (Gobet, Quince, & Ramette, 2010). Bray–Curtis dissimilarity matrices were generated based on square-root-transformed matrices. We used Principal Coordinate Analyses (PCoA) to assess how soil bacterial and fungal communities differed between control and carcass of bison and elk (“vegan” package v 2.5-4, Oksanen et al., 2019). We then extracted PCoA axes scores 1 and 2 and used LMM (“nlme” package) with Location, Species, Location x Species and DSK as fixed effects. Site was, again, included as random effect. We again calculated the contrasts as described above using the “lsmeans” package. We also assessed how ecosystem functions, and soil abiotic and biotic properties were related to the soil bacteria and fungi community structure associated with bison and elk control and carcasses using the “envfit” function in the “vegan” package (Oksanen et al., 2019).
Indicator species analyses were performed using the multipatt function implemented in the “indicspecies” package version 1.7.6 with 100000 permutations (De Caceres & Jansen, 2016). This step allowed to identify OTUs that led to changes in multivariate patterns between control and carcass of both bison and elk separately (De Cáceres, Legendre, & Moretti, 2010). The multipatt function uses a point biserial correlation coefficient statistical test. Indicator OTUs were defined as bacterial and fungal OTUs with more than 50 sequences, i.e., removing rare taxa and taxa with low abundances containing little indicator information (Rime et al., 2015) and that were significantly correlated with Location (p < 0.05, correlation coefficient > 0.3). A heatmap of these OTUs were generated with the vegan and ggplot2 packages. The indicator analyses were performed in R version 3.3.3 (R Core Team, 2017).

References
Abarenkov, K., Henrik Nilsson, R., Larsson, K.-H., Alexander, I. J., Eberhardt, U., Erland, S., … Kõljalg, U. (2010). The UNITE database for molecular identification of fungi – recent updates and future perspectives. New Phytologist, 186(2), 281–285. doi:10.1111/j.1469-8137.2009.03160.x
Bengtsson-Palme, J., Hartmann, M., Eriksson, K. M., Pal, C., Thorell, K., Larsson, D. G. J., & Nilsson, R. H. (2015). metaxa2: improved identification and taxonomic classification of small and large subunit rRNA in metagenomic data. Molecular Ecology Resources, 15(6), 1403–1414. doi:10.1111/1755-0998.12399
Bengtsson-Palme, J., Ryberg, M., Hartmann, M., Branco, S., Wang, Z., Godhe, A., … Nilsson, R. H. (2013). Improved software detection and extraction of ITS1 and ITS2 from ribosomal ITS sequences of fungi and other eukaryotes for analysis of environmental sequencing data. Methods in Ecology and Evolution, 4(10), 914–919. doi:10.1111/2041-210X.12073
Bivand, R., Altman, M., Anselin, L., Assuncao, R., Berke, O., Blanchet, G., … Yu, D. (2019). spdep: Spatial dependence, weighthing schemes, statistics. R package version 1.1-3.
Bump, J. K., Peterson, R. O., & Vucetich, J. A. (2009). Wolves modulate soil nutrient heterogeneity and foliar nitrogen by configuring the distribution of ungulate carcasses. Ecology, 90(11), 3159–3167.
Bump, J. K., Webster, C. R., Vucetich, J. A., Peterson, R. O., Shields, J. M., & Powers, M. D. (2009). Ungulate carcasses perforate ecological filters and create biogeochemical hotspots in forest herbaceous layers allowing trees a competitive advantage. Ecosystems, 12(6), 996–1007. doi:10.1007/s10021-009-9274-0
Danell, K., Berteaux, D., & Brathen, K. A. (2002). Effect of muskox carcasses on nitrogen concentration in tundra vegetation. Arctic, 55(4), 389392.
De Caceres, M., & Jansen, F. (2016). indicspecies: relationship between species and groups of species. R package version 1.7.6.
De Cáceres, M., Legendre, P., & Moretti, M. (2010). Improving indicator species analysis by combining groups of sites. Oikos, 119(10), 1674–1684. doi:10.1111/j.1600-0706.2010.18334.x
Edgar, R. C. (2013). UPARSE: highly accurate OTU sequences from microbial amplicon reads. Nature Methods, 10, 996.
Edgar, R. C., & Flyvbjerg, H. (2015). Error filtering, pair assembly and error correction for next-generation sequencing reads. Bioinformatics, 31(21), 3476–3482. doi:10.1093/bioinformatics/btv401
Frey, B., Niklaus, P. A., Kremer, J., Lüscher, P., & Zimmermann, S. (2011). Heavy-machinery traffic impacts methane emissions as well as methanogen abundance and community structure in oxic forest soils. Applied and Environmental Microbiology, 77(17), 6060–6068. doi:10.1128/AEM.05206-11
Frey, B., Rime, T., Phillips, M., Stierli, B., Hajdas, I., Widmer, F., & Hartmann, M. (2016). Microbial diversity in European alpine permafrost and active layers. FEMS Microbial Ecology, 92(3), fiw018.
Frossard, A., Donhauser, J., Mestrot, A., Gygax, S., Bååth, E., & Frey, B. (2018). Long- and short-term effects of mercury pollution on the soil microbiome. Soil Biology and Biochemistry, 120, 191–199. doi:https://doi.org/10.1016/j.soilbio.2018.01.028
Geremia, C., Wallen, R., & White, P. J. (2017). Status report of the Yellowstone bison population, September 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center for Resources.
Gobet, A., Quince, C., & Ramette, A. (2010). Multivariate cutoff level analysis (MultiCoLA) of large community data sets. Nucleic Acids Research, 38(15), e155–e155. doi:10.1093/nar/gkq545
Latter, P., & Howson, G. (1977). The use of cotton strips to indicate cellulose decomposition in the field. Pedobiologia, (17), 145–155.
Latter, P., & Walton, D. (1988). The cotton strip assay for cellulose decomposition studies in soil: history of the assay and development. In Cotton strip assay: an index for decomposition in soils (pp. 7–9). ITE Symposium, Institute of Terrestrial Ecology, Natural Environment Research Council, UK.
Lenth, R., & Love, J. (2018). lsmeans: least-squares means. R package version 2.27-62.
Martin, M. (2011). Cutadapt removes adapter sequences from high-throughput sequencing reads. EMBnet.Journal, 17(1), 10–12.
Meagher, M. M. (1973). The bison of Yellowstone National Park. NPS Scientific Monograph (Vol. 1). National Park Service, Yellowstone Center for Resources.
Melis, C., Selva, N., Teurlings, I., Skarpe, C., Linnell, J. D. C., & Andersen, R. (2007). Soil and vegetation nutrient response to bison carcasses in Białowieża Primeval Forest, Poland. Ecological Research, 22(5), 807–813. doi:10.1007/s11284-006-0321-4
Nikolenko, S. I., Korobeynikov, A. I., & Alekseyev, M. A. (2013). BayesHammer: Bayesian clustering for error correction in single-cell sequencing. BMC Genomics, 14(1), S7. doi:10.1186/1471-2164-14-S1-S7
Oksanen, J., Blanchet, F. G., Friendly, M., Kindt, R., Legendre, P., McGlinn, D., … Wagner, H. H. (2019). vegan: community ecology package. R package version 2.5-4.
Pinheiro, J., Bates, D., DebRoy, S., & Sarkar, D. (2018). nlme: Linear and nonlinear mixed effect models. R package version 3.1-131.1.
Quast, C., Pruesse, E., Yilmaz, P., Gerken, J., Schweer, T., Yarza, P., … Glöckner, F. O. (2013). The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research, 41(Database issue), D590–D596. doi:10.1093/nar/gks1219
Quimby, D. C., & Johnson, D. E. (1951). Weights and measurements of Rocky Mountain elk. Journal of Wildlife Management, 15, 57–62.
R Core Team. (2017). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Zurich, Switzerland.
R Core Team. (2019). R: A language and environment for statistical computing. Vienna, Austria: R Foundation for Statistical Computing.
Rime, T., Hartmann, M., Brunner, I., Widmer, F., Zeyer, J., & Frey, B. (2015). Vertical distribution of the soil microbiota along a successional gradient in a glacier forefield. Molecular Ecology, 24(5), 1091–1108. doi:10.1111/mec.13051
Risch, A. C., Jurgensen, M. F., & Frank, D. A. (2007). Effects of grazing and soil micro-climate on decomposition rates in a spatio-temporally heterogeneous grassland. Plant and Soil, 298(1–2), 191–201. doi:10.1007/s11104-007-9354-x
Schloss, P. D., Westcott, S. L., Ryabin, T., Hall, J. R., Hartmann, M., Hollister, E. B., … Weber, C. F. (2009). Introducing mothur: open-source, platform-independent, community-supported software for describing and comparing microbial communities. Applied and Environmental Microbiology, 75(23), 7537–7541. doi:10.1128/AEM.01541-09
Smith, D., Stahler, D., Cassidy, K., Stahler, E., Metz, M., Cassidy, B., … Cato, E. (2018). Yellowstone National Park wolf project annual report 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center of Resources.
Wang, Q., Garrity, G. M., Tiedje, J. M., & Cole, J. R. (2007). Naive Bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy. Applied and Environmental Microbiology, 73(16), 5261–5267. doi:10.1128/AEM.00062-07
Withington, C., & Sanford Jr., R. (2007). Decomposition rates of buried substances increase with altitude in a forest-alpine tundra ecotone. Soil Biology and Biochemistry, (39), 68–75.

Please cite this paper together with the citation for the datafile.

bacteria

display_name: bacteria

biogeochemical-cycling

display_name: biogeochemical-cycling

carcass

display_name: carcass

carrion

display_name: carrion

decomposition

display_name: decomposition

detritus

display_name: detritus

fungi

display_name: fungi

soil-biodiversity

display_name: soil-biodiversity

wolf

display_name: wolf

yellowstone

display_name: yellowstone

education

en: Education and science

en: Elk and bison carcasses in Yellowstone, USA