en: python aws cryowrf antarctica consistent

en: Scripts to preprocess (and download for some databases) atmospheric weather station data. Furthermore, a list of stations and a map can be created to have an overview.

en:
There are many sources providing atmospheric weather station data for the Antarctic continent. However, variable naming, timestamps and data types are highly variable between the different sources. The published python code intends to make processing of different AWS sources from Antarctica easier. For all datasets that are taken into account variables are renamed in a consistent way. Data from different sources can then be handled in one consistent python dictionary.

The following data sources are taken into account:

* AAD: Australian Antarctic Division (https://data.aad.gov.au/aws)
* ACECRC: Antarctic Climate and Ecosystems Cooperative Research Centre by the Australian Antarctic Division
* AMRC: Antarctic Meteorological Research Center (ftp://amrc.ssec.wisc.edu/pub/aws/q1h/)
* BAS: British Antarctic Survey (ftp://ftp.bas.ac.uk/src/ANTARCTIC_METEOROLOGICAL_DATA/AWS/; https://legacy.bas.ac.uk/met/READER/ANTARCTIC_METEOROLOGICAL_DATA/)
* CLIMANTARTIDE: Antarctic Meteo-Climatological Observatory by the italian National Programme of Antarctic Research (https://www.climantartide.it/dataaccess/index.php?lang=en)
* IMAU: Institute for Marine and Atmospheric research Utrecht (Lazzara et al., 2012), https://www.projects.science.uu.nl/iceclimate/aws/antarctica.ph
* JMA: Japan Meteorological Agency (https://www.data.jma.go.jp/antarctic/datareport/index-e.html)
* NOAA: National Oceanic and Atmospheric Administration (https://gml.noaa.gov/aftp/data/meteorology/in-situ/spo/)
* Other/AWS_PE: Princess Elisabeth (PE), KU Leuven, Prof. N. van Lipzig, personal communication
* Other/DDU_transect: Stations D-17 and D-47 (in transect between Dumont d’Urville and Dome C, Amory, 2020)
* PANGAEA: World Data Center (e.g. König-Langlo, 2012)

Important notes

* Information about data sources is available. Some downloading scripts are included in the provided code. However, users should make sure to comply with the data providers terms and conditions.
* Given changing download options of the differnent institutions the above links may not permanently work and data has to be retrieved by the user of this dataset.
* No quality control is applied in the provided preprocessing software - quality control is up to the user of the datasets. Some dataset are quality controlled by the owner.

Acknowledgements
--------------------------
We thank all the data providers for making the data publicly available or providing them upon request. Full acknowledgements can be found in Gerber et al., submitted.

References
---------------
Amory, C. (2020). “Drifting-snow statistics from multiple-year autonomous measurements in Adélie Land, East
Antarctica”. The Cryosphere, 1713–1725. doi: 10.5194/tc-14-1713-2020

Gerber, F., Sharma, V. and Lehning, M.: CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB, JGR - Atmospheres, submitted.

König-Langlo, G. (2012). “Continuous meteorological observations at Neumayer station (2011-01)”. Alfred Wegener
Institute, Helmholtz Centre for Polar and Marine Research, Bremerhaven, PANGAEA, doi: 10.1594/PANGAEA.
775173

antarctica

display_name: antarctica

aws

display_name: aws

consistent

display_name: consistent

cryowrf

display_name: cryowrf

python

display_name: python

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Preprocessing Antarctic Weather Station (AWS) data in python


maintainer: Giulia Mazzotti

en: snow-modelling snow-energy-balance snow-distribution forest-snow forest-structure

state: active

type: dataset

en: Coordinates data

en: Includes coordinate information of each surveyed point (7 x 276 = 1932 forest points, 2 open areas)

format: XLS

en: Grid point nomenclature

en: The grid structure of each forest site and the respective nomenclature applied to label individual points within each grid are outlined here.  Each point marks the location of snow depth measurements and co-located canopy structure parameters.

en: Snow depth data forest sites

en: Contains all snow depth data acquired at all forest sites during winters 2012/13, 2013714 and 2014/15.

en: Canopy data

en: Includes all canopy structure metrics computed at all surveyed locations

en: Snow depth data open sites

en: Contains all snow detph data accquired at open sites nearby the forest stands during the same period.

en: Meteo data to drive FSM2 model

media_type: application/zip

en: Includes meteorological driving data used to run the forest snow model FSM2, processed and parsed in text files that match the format required by FSM2. Separate files are available for each field area (Laret, Drusatscha and Ischlag) and season (2012/13, 2013/14, 2014/15). Each file includes data for the period from October 1st to May 31st at hourly resolution.

format: ZIP

mimetype: application/zip

en:
This dataset contains all snow, canopy and meteorological data presented and used in the publication: Mazzotti, G., Essery, R., Moeser, D. & Jonas T. (2020) 'Resolving spatial variability of forest snow using an energy-balance model with a 1-layer canopy'. Water Resources Research, https://doi.org/10.1029/2019WR026129.
This publication must be cited when using this dataset.

forest-snow

display_name: forest-snow

forest-structure

display_name: forest-structure

snow-distribution

display_name: snow-distribution

snow-energy-balance

display_name: snow-energy-balance

snow-modelling

display_name: snow-modelling

education

fr: Education, science

de: Bildung, Wissenschaft

it: Formazione e scienza

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Snow depth, canopy structure and meterorological datasets from the Davos area, Switzerland, Winters 2012/13-2014/15, used for high-resolution forest snow modelling


maintainer: Marcia Phillips

en: temperature permafrost permos gemsstock borehole

en: PERMOS DATA POLICY

media_type: PDF

format: PDF

en: Map of PERMOS borehole network

format: SERVICE

en: DATASET & PLOTS

media_type: URL

en: Data visualiser and download service provided by PERMOS.

en:
Processed ground temperature measurements at the Gemsstock permafrost borehole in canton Uri, Switzerland. The borehole is located at 2940 m asl on a steep (50°) North-West slope (315°). The surface material is bedrock and borehole depth is 40 m. Thermistors used YSI 44008. Year of drilling 2006. This borehole is part of the Swiss Permafrost network, PERMOS (www.permos.ch). Contact phillips@slf.ch for details of processing applied.

Publications

1. A. Haberkorn, M. Phillips, R. Kenner, H. Rhyner, M. Bavay, S.P. Galos, M. Hoelzle. Thermal regime of rock and its relation to snow cover in steep Alpine rock walls: Gemsstock, central Swiss Alps. 2015. Geografiska Annaler: Series A, Physical Geography. Volume 97. Issue 3. 579–597. http://dx.doi.org/10.1111/geoa.12101. 10.1111/geoa.12101.

2. R. Kenner, M. Phillips, C. Danioth, C. Denier, P. Thee, A. Zgraggen. Investigation of rock and ice loss in a recently deglaciated mountain rock wall using terrestrial laser scanning: Gemsstock, Swiss Alps. 2011. Cold Regions Science and Technology. Volume 67. Issue 3. 157–164. http://dx.doi.org/10.1016/j.coldregions.2011.04.006. 10.1016/j.coldregions.2011.04.006.

borehole

display_name: borehole

gemsstock

display_name: gemsstock

permafrost

display_name: permafrost

permos

display_name: permos

temperature

display_name: temperature

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Processed permafrost borehole data (2940 m asl), Gemsstock, Switzerland


maintainer: Sofia Pagliarin

en: imperviousness milan soil-sealing urban-atlas barcelona copernicus

media_type: mpk

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

media_type: CSV

en: Information on data sources

format: CSV

media_type: .csv

en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas

en: Soil sealing Barcelona and Milan different territorial levels


maintainer: Paraskevi Georgakaki

en: secondary-ice-production liquid-water-content ice-crystal-number-concentration jungfraujoch blowing-snow swiss-alps ice-water-content wrf

en: Observational data

media_type: zip-compressed folder of csv

en:
The .zip file contains 6 .csv files including all microphysical measurements taken at the Jungfraujoch station during the two periods of interest:

* 25-28 January 2014 : northwesterly-winds (NW)
* 29 January - 1 February 2014 : southeasterly-winds (SE)

The total Ice Crystal Number Concentration (ICNC; reported in L⁻¹) is measured by the two-dimensional stereo hydrometeor spectrometer (2D-S; Lawson et al., 2006) over the size range 10-1280 μm. The total ice water content (IWC; reported in gm⁻³) is also derived by the 2D-S data using the Brown and Francis (1995) mass-diameter relationship. Finally, the quantification of the liquid water content (LWC; reported in gm⁻³) is based on the liquid droplet size distribution data derived from a DMT cloud droplet probe (CDP; Lance et al., 2010) over the size range 2-50 μm. The frequency of the measurements in the .csv files is 30 min, to match the output frequency of the model. Datetime is also reported in the files (DD/MM/YYYY h:mm) in UTC.

Acknowledgment: Collection and pre-processing of the microphysical measurements has been performed by Gary Lloyd (gary.lloyd@manchester.ac.uk). More details about the instrumentation during the CLACE2014 campaign can be found in Lloyd et al. (2015).

en: WRF outputs

media_type: zip-compressed folder of NetCDF files

en:
The .zip file contains all the NetCDF outputs produced by the mesoscale Weather Research and Forecasting (WRF) model (version: 4.0.1). Two case studies were simulated in this study, between 25-28 January 2014 (00:00 UTC) and 29 January - 1 February 2014 (00:00 UTC), respectively. The former is denoted as "NW" and the latter as "SE", owing to the prevailing wind conditions at the Jungfraujoch (JFJ) station.

The outputs come from the innermost domain of the simulations with a spatial resolution of 1 km and are extracted from the nearest to JFJ model grid point (46.55°N 7.98°E). The dimensions of each model variable is [145,100], which corresponds to time and height, respectively. The frequency of the outputs is 30 min. Note that the first 24 hours of each simulation (i.e., the first 48 outputs) were considered spin up time.

The following sets of sensitivity simulations were presented in this study:

* CNTRL_NW.nc, CNTRL_SE.nc : Sensitivity simulations performed with the default version of WRF
* DS_PHILL_NW.nc, DS_PHILL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Phillips et al. (2018)
* DS_SULL_NW.nc, DS_SULL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Sullivan et al. (2018)
* PHILL_NW.nc, PHILL_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Phillips et al. (2017)
* TAKAH_NW.nc, TAKAH_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Sullivan et al. (2018) based on Takahashi et al. (1995)
* TAKAHrim_NW.nc, TAKAHrim_SE.nc : Same set-up as before but applied only to collisions between rimed ice particles
* BIPS_Xk0_DY_NW.nc, BIPS_Xk0_DY_SE.nc : Sensitivity simulations including a source of Xk0 (either 10.0 or 100.0 L⁻¹) ice crystals with sizes of DY (either 10 or 100 μm) in the first atmospheric level of the model
* BIPS100_PHILL_NW.nc, BIPS100_PHILL_SE.nc : Sensitivity simulations where the combined effect of blowing snow and ice-ice collisional break-up is examined

en:
This repository contains all WRF model outputs and observational data sets used for the paper:
Georgakaki, P., Sotiropoulou, G., Vignon, É., Billault-Roux, A.-C., Berne, A., and Nenes, A.: Secondary ice production processes in wintertime alpine mixed-phase clouds, Atmos. Chem. Phys. Discuss., https://doi.org/10.5194/acp-2021-760, in review, 2021.

blowing-snow

display_name: blowing-snow

ice-crystal-number-concentration

display_name: ice-crystal-number-concentration

ice-water-content

display_name: ice-water-content

jungfraujoch

display_name: jungfraujoch

liquid-water-content

display_name: liquid-water-content

secondary-ice-production

display_name: secondary-ice-production

swiss-alps

display_name: swiss-alps

wrf

display_name: wrf

en: Data for the publication "Secondary ice production processes in wintertime alpine mixed-phase clouds"


maintainer: Adam Winstral

en: snow-simulation jules-investigation-model snow snow-depth jim

en: DEM

media_type: text/plain

en: 1-km resolution DEM used for downscaling gridded NWP data to stations and for distributing BDE evaluations at HS-stations to SWE-stations

format: TXT

mimetype: text/plain

en: Station forcing data

en: All forcing data need to run JIM at HS and SWE stations. These are data downscaled directly from COSMO NWP data (WY14, WY15) and further enhanced by additional station observations of snow depth (HS) and air temperature (Ta) in WY17. Further information can be found in README file. Note that in WY14 and WY15, shortwave radiation was not split into direct and diffuse (not necessary for JIM) and that the default method in JIM for splitting precipitation phase was used. In WY 17, direct and diffuse were combined as input to JIM and JIM was forced with pre-processed liquid and solid precipitation phases.

en: File/data descriptor

en: HS and SWE observations

en: Automated (HS) and manual (SWE) data used to evaluate model simulations

en: These data were used to drive and evaluate Jules Investigation Model (JIM) snow simulations. The data provided are the forcing data used for the "deterministic" runs as described in Winstral et al., 2019. The bias-detecting ensemble (Winstral et al., 2019) used observed snow depths (HS) to detect biases in these deterministic simulations related to precipitation and energy inputs to JIM. Simulations that included the BDE evaluations substantially improved JIM simulations.

jim

display_name: jim

jules-investigation-model

display_name: jules-investigation-model

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-simulation

display_name: snow-simulation

en: Meteorological data used to develop and validate the bias-detecting ensemble (BDE)


maintainer: Michael Lehning

en: snow-conservation snow-farming snowpack winter-tourism snow terrestrial-laser-scanning

en: HS Fluela autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903
Nodata: -9999

en: Fluela .sno

media_type: SNO

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Flüela heap

en: Martell .sno

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Martell heap

en: HS Fluela spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903

en: Fluela .smet

media_type: SMET

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Windtunnel and DAV.

en: Martell .smet

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Hintermartell.

en: HS Martell autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en: HS Martell spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en:
Two data sets obtained for snow farming projects (Fluela, Davos, CH and Martell, IT) in 2015.

The data set contains for each site:

* 10 cm GIS raster of snow depth calculated from terrestrial laserscanning surveys (TLS) in the end of winter season (April/May)

* 10 cm GIS raster of snow depth calculated from TLS in the end of summer season (October)

Input files for SNOWPACK model:

* .sno: snow profile at the end of winter

* .smet: meteorological data measured by weather stations in the area

For more details see Grünewald, T., Lehning, M., and Wolfsperger, F.: Snow farming: Conserving snow over the summer season, The Cryosphere Discuss., https://doi.org/10.5194/tc-2017-93, in review, 2017.

snow-conservation

display_name: snow-conservation

snow-farming

display_name: snow-farming

snowpack

display_name: snowpack

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

winter-tourism

display_name: winter-tourism

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snowfarming data set Davos and Martell 2015


rorcc

maintainer: Tobias Wechsler

title_for_slug: rorcc

en: design-discharge hydropower environmental-flow run-of-river-power-plants climate-change

en: RoRCC

media_type: XLS

en:
The dataset “RoRCC” consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
-	metadata on the RoR power plants under consideration
-	annual and seasonal production scenarios differentiated into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)
-	annual and seasonal production loss due to environmental flow requirements
-	annual and seasonal the technical increase potential (via design discharge optimisation)
-	annual and seasonal changes in the hydrological cycle for the three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)

en:
The dataset "RoRCC" consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
1) metadata on the RoR power plants under consideration, 2) annual and seasonal production potential scenarios under into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099), 3) annual and seasonal streamflow scenarios, 4) annual and seasonal production loss due to environmental flow requirements, 5) annual and seasonal the technical increase potential (via design discharge optimisation) and 6) annual and seasonal changes in the hydrological cycle.

climate-change

display_name: climate-change

design-discharge

display_name: design-discharge

environmental-flow

display_name: environmental-flow

hydropower

display_name: hydropower

run-of-river-power-plants

display_name: run-of-river-power-plants


en: filtering range-maps species-observations accepted-name species-distribution hard-limit flags occurrence-records taxonomy r-package landsca ecoregions synonyms large-scale gbif conservation

en: gbif.range R package version 0.2 (current)

media_type: ZIP

en: wsl.gbif R package version 0.1 (deprecated)

en: Test version, not to be used.

en: GitHub URL

media_type: R

en: Although species range may be obtained using expert maps or modeling methods, expert data is often species-limited and statistical models need more technical expertise as well as many species observations. When unavailable, such information may be extracted from the Global Biodiversity Information facility (GBIF), the largest public data repository inventorying georeferenced species observations worldwide. However, retrieving GBIF records at large scale may be tedious if users are unaware of specific tools and functions that need to be employed. Here we present *gbif.range*, a R library that contains automated methods to generate species range maps from scratch using in-house ecoregions shapefiles and an easy-to-use GBIF download wrapper. Finally, this library also offers a set of additional very useful parameters and functions for large GBIF datasets (generate doi, extract GBIF taxonomy, records filtering...). [gbif.range R project](https://github.com/8Ginette8/gbif.range)

accepted-name

display_name: accepted-name

conservation

display_name: conservation

ecoregions

display_name: ecoregions

filtering

display_name: filtering

flags

display_name: flags

gbif

display_name: gbif

hard-limit

display_name: hard-limit

landsca

display_name: landsca

large-scale

display_name: large-scale

occurrence-records

display_name: occurrence-records

r-package

display_name: r-package

range-maps

display_name: range-maps

species-distribution

display_name: species-distribution

species-observations

display_name: species-observations

synonyms

display_name: synonyms

taxonomy

display_name: taxonomy

en: gbif.range - An R package to generate species range maps based on ecoregions and a user-friendly GBIF wrapper


maintainer: Yves Bühler

en: avalanche ramms release hazard-mapping snow hazard-indication-mapping

en: RAMMS simulations NHESS

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

en: Potential Release  Area  NHESS

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

hazard-mapping

display_name: hazard-mapping

ramms

display_name: ramms

release

display_name: release

snow

display_name: snow

en: Automated Avalanche Release Area (PRA) Delineation Davos


maintainer: EnviDat Support

en: python pattern-formation numerical-model snow vapor-transport

en:
Data and code v1.0 downloaded from the git.

Running the code requires an installation of FEniCS via docker.

en:
This python code uses the Finite Element library FEniCS (via docker) to solve the one dimensional partial differential equations for heat and mass transfer in snow. The results are written in vtk format.

The dataset contains the code and the output data to reproduce the key Figure 5 from the related publication:

_Schürholt, K., Kowalski, J., Löwe, H.; Elements of future snowpack modeling - Part 1: A physical
instability arising from the non-linear coupling of transport and phase changes, The Cryosphere, 2022_

The code and potential updates can be accessed directly through git via:

https://gitlabext.wsl.ch/snow-physics/snowmodel_fenics

numerical-model

display_name: numerical-model

pattern-formation

display_name: pattern-formation

python

display_name: python

vapor-transport

display_name: vapor-transport

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: A numerical solver for heat and mass transport in snow based on FEniCS


maintainer: Albrecht von Boetticher

en: interfoam dberisintermixing barrier-impact-simulation finite-volumes shallow-landslide natural-hazard murgang hangmuren debris-flow

en: debrisInterMixing for OF-Version 6

media_type: application/pdf

en: These are the installation instructions for debrisInterMixing4

mimetype: application/pdf

en: Installation Instructions for debrisInterMixing-6

en:
This version of debrisInterMixing is based on OpenFOAM Version 4.x and was tested on Ubuntu 18.04.1 LTS.
Please follow the instructions given in ReadMe_debrisInterMixing4.pdf for installation.

en:
Here the updated versions of debrisInterMixing are provided for download. The first OpenFoam-compatible Version 2.3.x are available as supplement to v. Boetticher, A., Turowski, J. M., McArdell,W. B., Rickenmann, D., Hürlimann, M., Scheidl, C., and Kirchner, J. W.: DebrisInterMixing-2.3: A Finite Volume solver for three dimensional debris flow simulations based on two calibration parameters. Part two: model validation with experiments. Geoscientific Model Development, 10, 11: 3963-3978. doi: 10.5194/gmd-10-3963-2017.
DebrisInterMixing is a Volume-of-Fluid based Finite Volume code that accounts for shear-thinning sensitive shares of fine sediment suspension together with pressure-sensitive components of the gravel grains within debris flow mixtures. All model properties can be derived from a material sample except for a grid-sensitive calibration parameter.
For more information, please contact albrecht.vonboetticher@wasserbau.ch.

barrier-impact-simulation

display_name: barrier-impact-simulation

dberisintermixing

display_name: dberisintermixing

debris-flow

display_name: debris-flow

finite-volumes

display_name: finite-volumes

hangmuren

display_name: hangmuren

interfoam

display_name: interfoam

murgang

display_name: murgang

natural-hazard

display_name: natural-hazard

shallow-landslide

display_name: shallow-landslide

en: Three-dimensional debris flow simulation tool debrisInterMixing


en: snow-stability-evaluation snow avalanche avalanche-forecast snowpack

en: Extracted data

en: Extracted data contain validation and results published in Richter et al. (2019).

en: Stability tests

en: Stability tests including csv-files with CT, ECT and PST experiments for each year and each field site.

en: README

en: README file explaining data structure and content

en: SNOWPACK simulations

en: This dataset contains all SNOWPACK simulations, including input files, setup and output files.

en: Manually observed snow profiles

en: Manually observed snow profiles as csv-files containing depth [cm], thickness [cm], density [kg m-3], hand hardness, first grain type, second grain type, first grain size [mm], and second grain size [mm] of each layer.

en:
To validate the critical crack length as implemented in the snow cover model SNOWPACK, PST experiments were conducted for three winter seasons (2015-2017) at two field site above Davos, Switzerland. This dataset contains manually observed snow profiles and stability tests. Furthermore, corresponding SNOWPACK simulations are included.
These data were analyzed and results were published in Richter et al. (2019).

Please refer to the Readme file for further details on the data.

These data are the basis of the following publication:
Richter, B., Schweizer, J., Rotach, M. W., and van Herwijnen, A.: Validating modeled critical crack length for crack propagation in the snow cover model SNOWPACK, The Cryosphere, 13, 3353–3366, https://doi.org/10.5194/tc-13-3353-2019, 2019.

avalanche

display_name: avalanche

avalanche-forecast

display_name: avalanche-forecast

snow-stability-evaluation

display_name: snow-stability-evaluation

snowpack

display_name: snowpack

en: Validating and improving the critical crack length in SNOWPACK


maintainer: Jana von Freyberg

en: precipitation stream-water alptal hydrology catchment stable-water-isotope

media_type: .txt

en:
Version 2 of the dataset contains additional information on:
- line-conditioned (lc) excess
- precipitation sample volumes
- isotope data quality

en: Data Set Documentation: alptal_Isotopes_daily_2015-2019_v2

media_type: .pdf

en: Documentations contains meta data of the data columns and information about the study catchments.

media_type: TXT

en: Single comma-separated txt-file with daily data of stable water isotopes measured in streamwater and precipitation in the Swiss Alptal catchment and two of its tributaries (Erlenbach and Vogelbach), as well as daily data of key hydrometeorological variables from the Alptal valley

en: This dataset contains four years of daily measurements of the natural isotopic composition (2H, 18O) of precipitation and stream water at the Alp catchment (area 47 km2) in Central Switzerland and two of its tributaries (0.73 km2 and 1.55 km2). In addition, the dataset contains daily measurements of key hydrometeorological variables.

alptal

display_name: alptal

catchment

display_name: catchment

hydrology

display_name: hydrology

precipitation

display_name: precipitation

stable-water-isotope

display_name: stable-water-isotope

stream-water

display_name: stream-water

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Four years of daily stable water isotope data in stream water and precipitation from three Swiss catchments


en: catchment-data snowpack rain-on-snow snow-hydrology meteorological-data

media_type: application/zip

en: The file contains all data needed to run simulations with the snow cover model SNOWPACK.

en: Meteorological data used to run SNOWPACK for 58 catchments in the Swiss Alps. The data consists of a 2 km grid of "virtual meteorological stations" for each catchment. It was used to simulate snow cover processes during rain-on-snow events, therefore meteorological data of each catchment contains at least one rain-on-snow event. Further information can be found in the attached readme.txt and in Würzer & Jonas et al. (2017), currently under review in Hydrological Processes.

catchment-data

display_name: catchment-data

meteorological-data

display_name: meteorological-data

rain-on-snow

display_name: rain-on-snow

snow-hydrology

display_name: snow-hydrology

en: Meteorological data for investigation of rain-on-snow events in 58 catchments in Switzerland


sensitivity-of-modeled-snow-instability

maintainer: Bettina Richter

title_for_slug: sensitivity-of-modeled-snow-instability

en: global-sensitivity-analysis numerical-avalanche-forecasting snow-instability snowpack snow-cover-modeling

en: Case SL

en: Extracted output data for case SL. Here biases were introduced to meteorological input data during the period of slab formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Manually observed snow profiles

en: Manually observed snow profiles at Weissfluhjoch field site for winter season 2016-2017, including layer depth, hand hardness, grain size and grain shape for each layer.

en: Case ALL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the whole simulation period. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Case WL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the period of weak layer formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Reference run

en: Reference run for the sensitivity analysis at Weissfluhjoch field site for winter season 2016-2017. Meteorological data from the automatic weather stations are used. No biases were introduced to the input data.

en: We investigated the sensitivity of modeled snow instability to meteorological input data using SNOWPACK. We therefore used input data from the automatic weather station at the Weissfluhjoch field site for the year 2016-2017. We investigated three scenarios and performed 14'000 simulations for each scenario. The dataset contains extracted output data from modeled SNOWPACK simulations, including setup files to reproduce the simulations. For further information read the README file.

global-sensitivity-analysis

display_name: global-sensitivity-analysis

numerical-avalanche-forecasting

display_name: numerical-avalanche-forecasting

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

en: Sensitivity of modeled snow instability


maintainer: Esther R. Frei

en: swiss-alps climate-change treeline g-tree forest

en: GTREE Website

en: climate data G-TREE experiment, Davos, Switzerland

en:
G-TREE is a global research network composed of 40 arctic and alpine researchers from around the world. This summer, our field experiment will be established at numerous sites across Canada, France, Norway, Spain, the United States, and Venezuela. Other sites are being developed in Russia, Scotland, and Sweden.

The Stillberg research area is located in the Eastern Swiss Alps near Davos, Switzerland. The site has been used for several long-term monitoring as well as experimental studies for the last four decades. Our G-TREE experiment consists of a lowest site located in a subalpine Larch-Spruce forest (Larici-Picetum) dominated by Larix decidua and Picea abies (1930 m a.s.l.), a transition zone site dominated by alpine shrubs (2100 m a.s.l.), and an uppermost site in an alpine meadow with some dwarf shrubs (2390 m a.s.l.).

climate-change

display_name: climate-change

forest

display_name: forest

g-tree

display_name: g-tree

swiss-alps

display_name: swiss-alps

treeline

display_name: treeline

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: G-TREE: Global Treeline Range Expansion Experiment Davos, Switzerland


present-weather-sensor-klosters

maintainer: Maxime Hervo

title_for_slug: present-weather-sensor-klosters

en: raclets weather visibility sensor precipitation

en: Present Weather Sensor Klosters

media_type: mat

en: Present Weather sensor measuring visibility and weather type installed at Klosters.

en: A present weather sensor (Vaisala PWD22) was deployed in Klosters (LON: 9.880413, LAT: 46.869019) for weather observation, combining the functions of a forwardscatter visibility meter and a present weather sensor. Besides measuring ambient light, it detects the intensity as well as the amount of both liquid and solid precipitation. More information can be found in the [User's Manual](ftp://ftp.cmdl.noaa.gov/aerosol/doc/manuals/PWD22_Manual.pdf).

raclets

display_name: raclets

sensor

display_name: sensor

visibility

display_name: visibility

weather

display_name: weather


maintainer: Christoph Marty

en: CH2014 REPORT

en:
CH2014-Impacts: Toward Quantitative Scenarios of Climate Change Impacts in Switzerland

The CH2014-Impacts report presents the results of a concerted effort of 15 Swiss research institutions to describe impacts of climate change in Switzerland quantitatively. This dataset contributes to the Crosphere/Snowcover section.

en: Graubunden input

media_type: application/x-tar

en: Grid input data for the 'Graubunden' CH2014 simulation.

mimetype: application/x-tar

en: Dataset

en: Datasets are grouped under experiment "Aare" and "Graubunden".Data is also made available in netCDF format. A range of tools are available to [read netCDF](http://www.unidata.ucar.edu/software/netcdf/software.html).

en: Aare input

en: Grid input data for the 'Aare' CH2014 simulation.

en:
 Overview

The CH2014-Impacts initiative is a concerted national effort to describe impacts of climate change in Switzerland quantitatively, drawing on the scientific resources available in Switzerland today. The initiative links the recently developed Swiss Climate Change Scenarios CH2011 with an evolving base of quantitative impact models. The use of a common climate data set across disciplines and research groups sets a high standard of consistency and comparability of results. Impact studies explore the wide range of climatic changes in temperature and precipitation projected in CH2011 for the 21st century, which vary with the assumed global level of greenhouse gases, the time horizon, the underlying climate model, and the geographical region within Switzerland. The differences among climate projections are considered using three greenhouse gas scenarios, three future time periods in the 21st century, and three climate uncertainty levels (Figure 1). Impacts are shown with respect to the reference period 1980-2009 of CH2011, and add to any impacts that have already emerged as a result of earlier climate change.

 Experimental Setup

Future snow cover changes are simulated with the physics-based model Alpine3D (Lehning et al., 2006). It is applied to two regions: The canton of Graubünden and the Aare catchment. These domains are modeled with a Digital Elevation Model (DEM) with a resolution of 200 m × 200 m. This defines the simulation grid that has to be filled with land cover data and downscaled meteorological input data for each cell for the time period of interest at hourly resolution. The reference data set consists of automatic weather station data. All meteorological input parameters are spatially interpolated to the simulation grid. The reference period comprises only thirteen years (1999–2012), because the number of available high elevation weather stations for earlier times is not sufficient to achieve unbiased distribution of the observations with elevation. The model uses projected temperature and precipitation changes for all greenhouse gas scenarios (A1B, A2, and RCP3PD) and CH2011 time periods (2035, 2060, and 2085).

 Data

Snow cover changes are projected to be relatively small in the near term (2035) (Figure 5.1 top), in particular at higher elevations above 2000 m asl. As shown by Bavay et al. (2013) the spread in projected snow cover for this period is greater between different climate model chains (Chapter 3) than between the reference period and the model chain exhibiting the most moderate change. In the 2085 period much larger changes with the potential to fundamentally transform the snow dominated alpine area become apparent (Figure 5.1 bottom). These changes include a shortening of the snow season by 5–9 weeks for the A1B scenario. This is roughly equivalent to an elevation shift of 400–800 m. The slight increase of winter precipitation and therefore snow fall projected in the CH2011 scenarios (with high associated uncertainty) can no longer compensate for the effect of increasing winter temperatures even at high elevations. In terms of Snow Water Equivalents (SWE), the projected reduction is up to two thirds toward the end of the century (2085). A continuous snow cover will be restricted to a shorter time period and/or to regions at increasingly high elevation. In Bern, for example, the number of days per year with at least 5 cm snow depth will decrease by 90% from now 20 days to only 2 days on average.

snow-depth

display_name: snow-depth

snow-water-equivalent

display_name: snow-water-equivalent

en: Alpine3D simulations of future climate scenarios CH2014


maintainer: Matthias Haeni

en: long-term swiss-forest-lab temperature relative-humidity meteo climate-change precipitation meteorology par wind-speed

en: Site photo of the field station (NAF)

media_type: image/jpeg

en: Site photo of the field station form the side.

mimetype: image/jpeg

en: Data plot of the field station (NAF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Nationalpark)

en: Site aerial photo from both Nationalpark stations. Source: Google. 2016. Site aerial photo from both Nationalpark stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Forest station data (NAB)

media_type: text/csv

en: Data file.

mimetype: text/csv

en: Data plot of the forest station (NAB)

en: Site photo of the forest station (NAB)

en: Site photo of the forest station from the side.

en: Field station data (NAF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Nationalpark in Switzerland where one station is located within a natural coniferous forest stand (NAB) with mountain pine (_Pinus mugo_; 210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Nationalpark is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Nationalpark, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: par relative-humidity precipitation climate-change meteo meteorology temperature swiss-forest-lab long-term wind-speed

en: Field station data (SCF)

en: Site photo of the forest station (SCB)

media_type: JPEG

en: Site photo of the forest station from below (viewing upwards the slope).

en: Site aerial photo (Schänis)

en: Site aerial photo from both Schänis stations. Source: Google. 2016. Site aerial photo from both Schänis stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Further details on the data repository

media_type: PDF

en: Meta data documentation.

en: Data plot of the forest station (SCB)

en: Data plot of the field station (SCF)

en: Site photo of the field station (SCF)

en: Site photo of the field station from above (viewing downwards the slope).

en: Forest station data (SCB)

media_type: CSV

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Schänis in Switzerland where one station is located within a natural mixed forest stand (SCB) with European beech (_Fagus sylvatica_; 130-150 yrs), European silver fir (_Abies alba_; 130-150 yrs) and European ash (_Fraxinus excelsior_; 130-150 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, SCF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Schänis is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Schänis, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1998 onwards


maintainer: Henning Löwe

en: granular-snow fast-sintering angle-of-repose grain-shape discrete-element-modelling

media_type: text/plain

en: Angle of repose and 3D CT images

en:
5 Snow types were examined and glass beads as a cohesion-less reference, named as follows:

RG: rounded grains (sieved with 0.7 - 1.4 mm)

FC: faceted grains (1.4 - 2 mm)

FCS: small faceted grains (0.7 - 1.4 mm)

IB: ice beads (4 mm)

IBS: small ice beads (2 - 2.2 mm)

GB: glass beads(2 mm)

en:
Angle of repose experiments were performed with different snow types at temperatures between -2 and -40°C. They were used to examine granular snow dynamics on the grain-scale with focus on the role of grain shape and cohesion. The angle of repose was observed by sieving snow onto a round, freestanding base until a stationary heap was formed.

This dataset consists of 1) the images of the experimental heaps that were taken to determine the angle of repose, 2) one binary 3D micro computed tomography image of each snow type. The CT images were taken with the SLF micro-CT40 to characterize snow properties and grain shape.

The experiments with natural snow types (rounded and faceted grains) and spherical model snow allowed for an examination of the differences in granular properties between natural grain shapes and spherical particles in view of Discrete Element Modelling. With the chosen temperatures, the effect of sintering could be observed that increases the angle of repose with increasing temperature.

angle-of-repose

display_name: angle-of-repose

discrete-element-modelling

display_name: discrete-element-modelling

fast-sintering

display_name: fast-sintering

grain-shape

display_name: grain-shape

granular-snow

display_name: granular-snow

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Angle of repose experiments with natural and spherical snow


en: microct icecube snow specific-surface-area intercomparison

en: Statistics of samples

media_type: XLSX

en: TARTES simulations

media_type: ipynb

en: Jupyter notebook with TARTES simulations.

en: IceCube and MicroCT data

en: Grain survey of snow particles

en: tbd

en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

snow

display_name: snow

specific-surface-area

display_name: specific-surface-area


maintainer: Leonie Schönbeck

en: gas-exchange pinus-sylvestris drought fluorescence acclimation vpd photosynthesis

en: Pfynwald gas exchange

en:
Full dataset of Pfynwald gas exchange data taken in the period from June 2013 to October 2020.
All metdata can be found in attached documents.
Data uploaded after quality control using guidelines by Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Methods light response

en: Methods and parameters for light response curves

en: Methods fluorescence

en:
Parameters and methodology for Fluorescence measurements

Metadata format from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Methods ACi curves

en:
Parameters and methods for CO2 response curves of Photosynthesis.

Metatdata format by
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Methods survey

media_type: .csv

en: Parameters and methods for point measurements / survey measurements

en: Methods diurnal measurements

en:
Parameters and methodology for diurnal measurements

Metadata format from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Instrument details

en:
Instrument details for all LiCor instruments used during collection of dataset.

Metatdata created following guidelines from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Variable names and units

en: Variable names, description and units for the Pfynwald Gas exchange data

en:
Gas exchange was measured on control, irrigated and irrigation-stop trees at the irrigation experiment Pfynwald, during the years 2013, 2014, 2016-2020. The measurement campaigns served different purposes, resulting in a large dataset containing survey data, CO2 response curves of photosynthesis, light response curves of photosynthesis, and fluorescence measurements. Measurements were done with LiCor 6400 and LiCor 6800 instruments. Until 2016, measurements were done on excised branches or branches lower in the canopy. From 2016 onwards, measurements were done in the top of the canopy using fixed installed scaffolds.
All metadata can be found in the attached documents.

acclimation

display_name: acclimation

drought

display_name: drought

fluorescence

display_name: fluorescence

gas-exchange

display_name: gas-exchange

photosynthesis

display_name: photosynthesis

pinus-sylvestris

display_name: pinus-sylvestris

vpd

display_name: vpd

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: 2013-2020 gas exchange at Pfynwald


en: snow-temperature snow-stratigraphy ice-layers snowmicropen weissfluhjoch water-front

en: WFJ_ICE_LAYERS dataset

en: README

en: The WFJ_ICE_LAYERS dataset contains multi-instrument snowpack measurements at high temporal resolution, which enable to monitor the formation of deep ice layers due to preferential water flow, at the Weissfluhjoch research site, Davos, Switzerland. It covers the winter 2016/2017, with a focus on the early melting season. This dataset includes traditional snowpack profiles (weekly resolution, 15/11/2016-29/05/2017), SnowMicroPen penetration resistance profiles (daily resolution, 01/02/2017-19/04/2017), snow temperatures measured at different heights in the snowpack (half-hourly resolution, 01/03/2017-15/04/2017) and the water front height derived from an upward-looking ground penetrating radar (3-hour resolution, 04/03/2017-08/04/2017). The measurements are complemented by initialization files for SNOWPACK model simulations with the ice reservoir parameterization at Weissfluhjoch for the winter 2016/2017.

ice-layers

display_name: ice-layers

snow-stratigraphy

display_name: snow-stratigraphy

snow-temperature

display_name: snow-temperature

snowmicropen

display_name: snowmicropen

water-front

display_name: water-front

weissfluhjoch

display_name: weissfluhjoch

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: WFJ_ICE_LAYERS: Multi-instrument data for monitoring deep ice layer formation in an alpine snowpack


en: strategic-plans urban-region spatial-information development-priorities europe

en: Planning intentios

en:
The present dataset is part of the report titled Gradinaru S.R., Hersperger A.M., Schmid F. (2021). Deriving Planning Intentions from written planning documents. Report on CONCUR Project- From plans to land change: how strategic spatial planning contributes to the development of urban regions.
The data corresponds to the data collected as part of the DPI Method for deriving all PIs contained in a plan (open coding) as detailed in section 4 of the report. The method involved reading the plans to break down of information in meaningful discrete “incidents” or planning intentions. To identify the planning intentions, the starting points were represented by a) the structuring of the plans in chapters and sub chapters and b) the themes that the plans addressed. Thus, the collected information was not grouped according to pre-defined categories of planning intentions, but rather put together as a list of intentions as revealed by each plan. As a result, we provide, for each case study, a document (named [Urban region name] PI as defined in the plan) which contains:
	Date when the information was filled in.
	Name of the urban region and analysed strategic spatial plan .
	A list of all planning intentions contained in a plan, with each PI being addresses as follows:
	Name of PI as it appears in the plan
	Translated name of the PI (i.e. short name for easy understanding of the meaning)
	Explanation regarding the meaning of the PI
	Why the PI is considered a priority for the urban region
	Spatial information on the PI (text and cartographic representations).
In total, 14 documents are available, one for each case study. Documents contain up to 20 pages of information extracted from the plans together with explanations and notes taken during plan reading.

development-priorities

display_name: development-priorities

europe

display_name: europe

spatial-information

display_name: spatial-information

strategic-plans

display_name: strategic-plans

urban-region

display_name: urban-region

en: Planning intentions in strategic plans of European urban regions


maintainer: Anita C. Risch

en: grassland herbivore nutrient-network global-change climate fertilization soil nitrification ammonification nitrogen mineralization

en: Risch et al. 2020 - Raw data for publication "Global impacts of fertilization and herbivore removal on soil net nitrogen mineralization are modulated by local climate and soil properties"

en:
we assessed how the removal of mammalian herbivores (Fence) and fertilization with growth-limiting nutrients (N, P, K, plus nine essential macro- and micronutrients; NPK) individually, and in combination (NPK+Fence), affected potential and realized soil net Nmin across 22 natural and semi-natural grasslands on five continents. Our sites spanned a comprehensive range of climatic and edaphic conditions found across the grassland biome. We focused on grasslands, because they cover 40-50% of the ice-free land surface and provide vital ecosystem functions and services. They are particularly important for forage production and C sequestration. Worldwide, grasslands store approximately 20-30% of the Earth’s terrestrial C, most of it in the soil (Schimel, 1995; White et al., 2000).

Study sites and experimental design
The 22 sites contributing to this project are part of the Nutrient Network Global Research Cooperative (NutNet, https://nutnet.umn.edu/). Mean annual temperature across our 22 sites ranged from -4 to 22°C, mean annual precipitation from 252 to 1,592 mm, and elevations from 6 to 4,261 m above sea level (Fig. 1, Supplementary Table S1). Soil organic C varied from 0.8 to 7.8%, soil total N from 0.1 to 0.6%, and the soil C:N ratio from 9.1 to 21.5. Soil clay content spanned from 3.0 to 35%, and soil pH from 3.4 to 7.6 (Supplementary Table S2). Thus, the sites covered a wide range of environments in which grasslands occur (Fig. 1, Supplementary Table S1 & S2).
At each site, the effects of nutrient addition and herbivore removal were tested via a randomized-block design (Borer et al., 2014; Supplementary Fig. S1a). Three replicate blocks with 10 treatment plots each were established at each site, with the exception of the site at bldr.us, where only two blocks were established (Supplementary Fig. S1a). The 10 plots were randomly assigned to a nutrient or fencing treatment, but only a subset of four plots was used in the current study, each with a different treatment (see below; Supplementary Fig. S1a). All plots were 5 x 5 m and divided into four 2.5 x 2.5 m subplots (Supplementary Fig. S1b). Each subplot was further divided into four 1 x 1 m square sampling plots, one of which was set aside for soil sampling (Borer et al., 2014; Supplementary Fig. S1b). Plots were separated by at least 1 m wide walkways.
In this study, we collected data from the following four treatments: (i) untreated control plots (Control), (ii) herbivore removal plots (Fence), (iii) plots fertilized with N, P, K, plus nine essential macro and micronutrients (NPK), and (iv) plots with simultaneous fertilizer addition and herbivore removal (NPK+Fence; Supplementary Fig. S1a). The number of years of treatment differed among sites (2 – 9 years since start of treatment; Supplementary Table S1). For the nutrient additions, all sites applied 10 g N m-2 yr-1 as time-release urea; 10 g P m-2 yr-1 as triple-super phosphate; 10 g K m-2 yr-1 as potassium sulfate. A micro-nutrient mix (Fe, S, Mg, Mn, Cu, Zn, B, Mo, Ca) was applied at 100 g m-2 together with K in the first year of treatments but not thereafter.
The vertebrate herbivore removal treatment (Fence) was established by fencing two plots, one control and one NPK plot, within each of the blocks (Supplementary Fig. S1a). We designed the fences so that they would effectively exclude aboveground mammalian herbivores with a body mass of over 50 g (Borer et al., 2014). At the majority of sites, the height of the fences was 180 cm, and the fence design included wire mesh (1 cm holes) on the first 90 cm along with a 30 cm outward-facing flange stapled to the ground to exclude burrowing animals; climbing and subterranean animals may potentially still access these plots (Borer et al., 2014). For slight modifications in fence design at a few sites see Supplementary Table S3. While most sites only had native herbivores, a few sites (4) were also grazed by domestic animals (Supplementary Table S1).
Potential and realized soil net N mineralization, ammonification, nitrification and other soil properties
Each site participating in the study received a package containing identical material from the Swiss Federal Institute for Forest, Snow and Landscape Research (WSL) to be used for sampling and on-site N incubations. For the field incubation, we followed the protocol by Risch et al. (2015, 2019). Briefly, we drove a 5 x 15 cm (diameter x depth) steel cylinder 13.5 cm deep into the soil after clipping the vegetation at randomized locations in each plot. The top 1.5 cm of the cylinder remained empty to capture incoming N from run-off or deposition with a polyester mesh bag (mesh-size 250 µm) filled with 13.2 ± 0.9 g of acidic and alkaline exchanger resin (1:1 mixture; ion-exchanger I KA/ion-exchanger III AA, Merck AG, Darmstadt). The bag was fixed in place with a metal Seeger ring (Bruetsch-Rüegger Holding, Urdorf, Switzerland). We then removed 1.5 cm soil at the bottom of the cylinder and placed another resin bag to capture N leached from the soil column. The exchange resin was saturated with H+ and Cl- prior to filling the bags by stirring the mixture in 1.2M HCl for 1 h and then rinsing it with demineralized water until the electrical conductivity of the water reached 5 μS/cm. The cylinders were then re-inserted into the cored hole, level with the soil surface, and incubated for an average of 42 days (range 40 to 57days). The individual site coordinators chose the timing of incubation to start approximately six weeks prior to peak plant biomass production. All incubations were completed between February 2015 and January 2016 accounting for differences in growing season between northern and southern hemispheres. At the end of the incubation, the cylinders were re-collected and immediately shipped to WSL in an insulated box together with cold packs to halt further mineralization. Gloves were worn at all times to avoid contamination of the samples. Upon arrival at WSL, we extracted the resin bags and a 20 g subsample of sieved soil (4 mm) separately in a 100 ml PE-bottle with 80 ml 1 M KCl for 1.5 h on an end-over-end shaker and filtered through ashless folded filter paper (DF 5895 150, ALBET LabScience). We measured NO3- (colorimetrically; Norman & Stucki, 1981) and NH4+concentrations (flow injection analysis; FIAS 300, Perkin Elmer) on these filtrates.
At the start of the field incubation, we additionally collected two soil cores of 5 x 12 cm (diameter x depth) in each sampling plot and composited them to measure potential soil net Nmin, soil chemical and biological properties (see below). We also collected an additional sample (5 x 12 cm) to assess soil physical properties, which remained within the steel cylinder. Both ends were tightly closed with plastic caps. Cores were carefully packed to avoid further disturbance, and together with the composited soil samples, were shipped to the laboratory at WSL within a few days after collection.
From the composited samples, we extracted an equivalent of 20 g dry soil with KCl, as described above, and measured NO3- and NH4+concentrations. Realized soil net Nmin was then calculated as the difference between the inorganic N content of samples collected at the end of the incubation (plus N extracted from the bottom resin bag) and the N content at the beginning of the incubation; values were scaled to represent daily mineralization rates (mg N kg-1soil d-1; Risch et al., 2015). Realized soil net Nmin values represent an average period of 42 days prior to peak biomass, typically the highest period of biological activity, and not the entire year (Risch et al., 2019).
A second subsample of the composited sample was used to determine potential soil net Nmin in the laboratory (Risch et al., 2019). Briefly, we weighed duplicate samples (8 g dry soil) into 50-ml Falcon tubes. Soil moisture was brought to 60% of the field capacity of each plot, the Falcon tubes tightly closed and then incubated at 20°C for 42 days in a dark room. Every week the Falcon tubes were opened and ventilated. At the end of the incubation, the soil samples were extracted the same way as described above and NO3- and NH4+ was determined. Potential soil net Nmin was calculated as the difference between the N content before and after the incubation and scaled to represent daily values (mg N kg-1soil d-1). Using our NO3- and NH4+ measures we also calculated potential and realized soil net nitrification and soil net ammonification to be able to better understand the drivers of fertilization and herbivore removal effects on potential and realized soil net Nmin.
A third subsample of the composite soil sample was sieved (2 mm mesh) and microbial biomass (μg Cmic g-1 soil dry weight) was estimated by measuring the maximal respiratory response to the addition of glucose solution (4 mg glucose per g soil dry weight dissolved in distilled water; substrate-induced respiration method) on approximately 5.5 g of soil (Anderson & Domsch, 1978). The rest of the composited sample was dried at 65°C for 48 h, ground and sieved (2 mm mesh) to assess a series of soil chemical properties (Risch et al., 2019). We measured the percentage of clay as an indicator of soil texture (Gee & Bauder, 1986; Risch et al., 2019).
Statistical analyses
Potential and realized soil net Nmin were square root transformed to account for a highly skewed data distribution (yt = sign(y)*sqrt|y|; negative values in the data set impeded log transformation). To assess treatment effects on potential and realized soil net Nmin, we used linear mixed effects models (LMMs) fitted by maximum likelihood using the lme function from the nlme package (version 3.131.1; Pinheiro et al., 2016), R version 3.6.1; R Foundation for Statistical Computing. Treatment (Control, Fence, NPK, NPK+Fence) was a fixed factor, with site and block as random factors, where block was nested within site. We also tested for effects of time since start of treatments in preliminary analyses by adding total treatment years as an additional fixed factor. We did not find a significant effect of years of treatment, and thus dropped this variable from the models. The LMMs were corrected using varIdent if the homogeneity of variance criterion was not met (Pinheiro et al., 2016). To visualize our results, we calculated treatment effects using Cohens’ d statistic (Cohen, 1977; Koricheva et al., 2013). Note that calculating response ratios (or log response ratios) was not possible with our data, as we have both negative and positive values. We also fitted LMMs for potential and realized soil net ammonification and nitrification to gain more insight into how global change affects the processes underpinning potential and realized soil net Nmin. We also sqrt-transformed (see above) these dependent variables. Treatment was included as a fixed factor with random factors as described above. In addition, we assessed how potential and realized soil net Nmin were related to potential and realized soil net ammonification and nitrification, respectively. For this, we calculated site averages for each treatment separately. We then ran LMMs, with potential and realized soil net Nmin as the dependent variable, potential and realized soil net ammonification/nitrification as the independent ones. Site was included as a random factor.
Based on our previous work (Risch et al., 2019) and the existing literature (Schimel & Bennett, 2004; Liu et al., 2017), we developed a priori causal conceptual models of relationships among treatments, environmental drivers, and potential and realized soil net Nmin (Supplementary Fig. S2) to test with structural equation modelling (SEM) using a d-sep approach (Shipley, 2009; Lefcheck, 2016). The variables included in the model were long-term climatic conditions, specifically, site-level mean annual precipitation (MAP) and temperature of the wettest quarter (T.q.wet), plot-level soil texture (clay content) and soil microbial biomass. Mean annual precipitation and T.q.wet were obtained from WorldClim (Hijmans et al., 2005) (http://www.worldclim.org/) and together with the experimental treatments were predicted to directly affect soil properties and soil net Nmin (Supplementary Fig. S2). Soil clay content was, in turn, predicted to affect microbial biomass and soil net Nmin. Because we determined microbial biomass prior to incubating the samples in the laboratory or field, we assumed that the abundance of these microbes would be responsible for N process rates and not vice versa (Supplementary Fig. S2). We tested our conceptual model (Supplementary Fig. S2) using the piecewiseSEM package (version 2.0.2; Lefcheck, 2016) in R 3.4.0, in which a structured set of linear models are fitted individually. This approach allowed us to account for the nested experimental design, and overcome some of the limitations of standard structural equation models, such as small sample sizes (Shipley, 2009; Lefcheck, 2016). We used the lme function of the nlme package to model response variables, including site as a random factor. Good fit of the SEM was assumed when Fisher’s C values were non-significant (p > 0.05). For all significant interactions between covariates and experimental treatments detected in the SEMs, we calculated treatment effect sizes, i.e. the differences in potential or realized soil net Nmin between Control and treatments (Fence, NPK, NPK+Fence) and plotted these values against the climate or soil covariates. Finally, we fitted LMMs for the soil variables included in our SEMs, with treatment as the fixed factor, and with site and block as random factors, where block was nested within site.

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch Anita C., Zimmermann, Stefan, Moser, Barbara, Schütz, Martin, Hagedorn, Frank, Firn, Jennifer, Fay, Philip A., Adler, Peter B., Biederman, Lori A., Blair, John M., Borer, Elizabeth T., Broadbent, Arthur A.D., Brown, Cynthia S., Cadotte, Marc W., Caldeira, Maria C., Davies, Kendi F., di Virgilio, Augustina, Eisenhauer, Nico, Eskelinen, Anu, Knops, Johannes M.H., MacDougall, Andrew S., McCulley, Rebecca L., Melbourne, Brett A., Moore, Joslin L., Power, Sally A., Prober, Suzanne M., Seabloom, Eric W., Siebert, Julia, Silveira, Maria L. , Speziale, Karina L., Stevens, Carly J., Tognetti, Pedro M., Virtanen, Risto, Yahdjian, Laura, Ochoa-Hueso, Raul (accepted). Global impacts of fertilization and herbivore removal on soil net nitrogen mineralization are modulated by local climate and soil properties. Global Change Biology

Please cite this paper together with the citation for the datafile.

We assessed how the removal of mammalian herbivores (Fence) and fertilization with growth-limiting nutrients (N, P, K, plus nine essential macro- and micronutrients; NPK) individually, and in combination (NPK+Fence), affected potential and realized soil net Nmin across 22 natural and semi-natural grasslands on five continents. Our sites spanned a comprehensive range of climatic and edaphic conditions found across the grassland biome. We focused on grasslands, because they cover 40-50% of the ice-free land surface and provide vital ecosystem functions and services. They are particularly important for forage production and C sequestration. Worldwide, grasslands store approximately 20-30% of the Earth’s terrestrial C, most of it in the soil (Schimel, 1995; White et al., 2000).

ammonification

display_name: ammonification

climate

display_name: climate

fertilization

display_name: fertilization

global-change

display_name: global-change

grassland

display_name: grassland

herbivore

display_name: herbivore

mineralization

display_name: mineralization

nitrification

display_name: nitrification

nitrogen

display_name: nitrogen

nutrient-network

display_name: nutrient-network

soil

display_name: soil

en: Anthropogenic change and soil net N mineralization


en: snowpack snow-profiles rutschblock failure-layer snow-stratigraphy snowpack-simulation snow-instability

en: DAV data set: Properties of observed snow profiles and simulated failure layers

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

en: Simulated snow profiles

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en: ReadMe

en: ReadMe file explaining data structure and content

en: Observed snow profiles

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-instability

display_name: snow-instability

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack

display_name: snowpack

snowpack-simulation

display_name: snowpack-simulation

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Observed and simulated snow profile data


maintainer: Zhao

en: austin driving-factors urban-land-use planning land-dynamics

en: Potential driving factors of urban transformations of Austin over 25 years

media_type: ZIP

en: In this study, the Austin metropolitan area, Texas, U.S., one of the fastest urban transformations and transformations regions, is selected to test the hypothesis that spatial planning and policies are important factors of urban transformations. Despite ample previous work in understanding the interactions between human and urban form transformation at specific areas, the actual interventions and outcomes of planning and policies (e.g., ‘smart growth’) on urban forms have been poorly measured. In this study, the potential influencing factors of urban transformations of Austin over 25 years were selected and collected.

austin

display_name: austin

driving-factors

display_name: driving-factors

land-dynamics

display_name: land-dynamics

planning

display_name: planning

urban-land-use

display_name: urban-land-use

education

en: Education and science

en: EnviDat: the Environmental Data Portal


maintainer: Tessa Hegetschweiler

en: forest teenagers recreational-activities childhood adolescents

en: Dataset comments

en: The codebook to the dataset

en: Survey at schools 2017

en: The dataset of the questionnaire survey at schools in SPSS-format.

en: Questionnaire school survey

media_type: application/pdf

en: The questionnaire used in the survey at 8 schools aimed at teenagers in German.

en: Dataset survey at schools

en: The dataset of the questionnaire survey at schools in excel format.

en: The data results from a questionnaire survey conducted at 8 schools in the cantons Zurich, Aargau and St. Gallen. Respondents aged 13-22 years. The aim of the survey was to gain insight into teenagers' relationship to the forest, reasons for visiting or not visiting the forest and activities in the forest.

adolescents

display_name: adolescents

childhood

display_name: childhood

forest

display_name: forest

recreational-activities

display_name: recreational-activities

teenagers

display_name: teenagers

en: Factors influencing teenagers' forest visit frequency


en: nfi-photos online-questionnaire-survey visual-attractiveness adults-and-teenagers perception-of-ecosystem-services

en: Questionnaire French

en: Dataset in csv-format

en: SPSS-Dataset

en: Codebook to SPSS-file

en: Questionnaire German

en: Questionnaire Italian

en: This questionnaire survey was conducted as an online survey and aimed at investigating the relationship between physical forest characteristics, visual attractiveness of forest and the perception of ecological and cultural ecosystem services in urban forests. Each participant was shown 6 photos out of a pool of 50 photos taken from the Swiss National Forest Inventory (NFI) database. Physical forest characteristics were derived from the photos. The study was conducted as part of the "WaMos meets LFI" (WML) project.

adults-and-teenagers

display_name: adults-and-teenagers

nfi-photos

display_name: nfi-photos

online-questionnaire-survey

display_name: online-questionnaire-survey

perception-of-ecosystem-services

display_name: perception-of-ecosystem-services

visual-attractiveness

display_name: visual-attractiveness

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Relationship between physical forest characteristics, visual attractiveness and perception of ecosystem services in urban forests


aerosol-data-weissfluhjoch

title_for_slug: aerosol-data-weissfluhjoch

en: linda raclets particles inp ice-nucleation aerosol

en: OPC-N3 Dataset Weissfluhjoch

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: LINDA Dataset Weissfluhjoch

en: The LINDA file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en: SMPS Dataset Weissfluhjoch

media_type: application/x-netcdf

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity) in a temporal resolution of 2 minutes, with time in UTC, measured at Weissfluhjoch.

mimetype: application/x-netcdf

en: APS Dataset Weissfluhjoch

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Weissfluhjoch.

en: OPC-GT526S Dataset Weissfluhjoch

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Weissfluhjoch (LON: 9.806475, LAT: 46.832964). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs), and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (SMPS 3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3787 TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and LINDA: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l min‾¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the LED based Ice Nucleation Detection Apparatus (LINDA, University of Basel) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

linda

display_name: linda

particles

display_name: particles

raclets

display_name: raclets

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Aerosol Data Weissfluhjoch


maintainer: Mahdi Jafari

en: openfoam convection-in-snow snow-density-profile numerical-simulation vapor-transport

en: snowpackBuoyantPimpleFoam

en:
This zipped folder includes (1) the source code files, (2) an example case for simulation, and (3) an instruction how to compile and use the new solver.

Note that the most updated version of snowpackBuoyantPimpleFoam can be found in the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/snow-models/snowpackbuoyantpimplefoam

en: snowpackBuoyantPimpleFoam is a two-phase solver implemented to model convection of water vapor with phase change in snowpacks. This new solver is based on the standard solver of buoyantPimpleFoam in the open-source fluid dynamics software, OpenFOAM 5.0 (www.openfoam.org).

convection-in-snow

display_name: convection-in-snow

numerical-simulation

display_name: numerical-simulation

openfoam

display_name: openfoam

snow-density-profile

display_name: snow-density-profile

vapor-transport

display_name: vapor-transport

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: snowpackBuoyantPimpleFoam: an OpenFOAM Eulerian–Eulerian two-phase solver for modelling convection of water vapor in snowpacks