disdrometer-data-gotschnagrat

title_for_slug: disdrometer-data-gotschnagrat

en: raclets precipitation disdrometer hydrometeors visibility

en: Disdrometer Data Gotschnagrat

en: The zip folder contains one netCDF file per day for Gotschnagrat from February 11 to March 27 2019 with a temporal resolution of 30 seconds (time in UTC). The naming convention for the files is Gotschna_YYYYMMDD.nc and the files include the following: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

en: A laser optical disdrometer (Parsivel² , OTT Hydromet) was deployed at Gotschnagrat (LON: 9.849, LAT: 46.859) to measure hydrometeors by extinction when passing a laser beam. The instrument can classify eight different kinds of precipitation, including rain, hail, snow, drizzle, and hybrid forms. The dataset contains information on precipitation amount and type for the period of February 11 to March 27 2019 at Gotschnagrat.

disdrometer

display_name: disdrometer

hydrometeors

display_name: hydrometeors

raclets

display_name: raclets

visibility

display_name: visibility

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Peter Bebi

en: soil-temperature carbon-dioxide vegetation experiment climate-change

state: active

type: dataset

en: FACE experimental design

media_type: PNG

format: PNG

en: FACE DATASETS

media_type: application/zip

format: ZIP

mimetype: application/zip

en: Project description

format: SERVICE

en:
 Overview
High elevation ecosystems are important in research about environmental change because shifts in climate associated with anthropogenic greenhouse gas emissions are predicted to be more pronounced in these areas than in most other regions of the world. This project involves a Free Air CO2 Enrichment (FACE) and soil warming experiment located in a natural treeline environment near Davos, Switzerland (Stillberg, 2200 m a.s.l.). Elevated atmospheric CO2 concentrations (+200 ppm) were applied from 2001 to 2009, and a soil warming treatment (+4 K) was added in 2007 (ongoing). The combined CO2 enrichment and warming treatment reflects conditions expected to occur in this region in approximately 2050. A broad range of ecological and biogeochemical research is carried out as part of this environmental change project.

#Experimental setup
The experiment consists of 40 hexagonal 1.1 m2 plots, 20 with a Pinus mugo ssp. uncinata (mountain pine, evergreen) individual in the centre and 20 with a Larix decidua (European larch, deciduous) individual in the centre. A dense cover of understorey vegetation surrounds the tree in each plot, including the dominant dwarf shrub species Vaccinium myrtillus (bilberry), Vaccinium gaultherioides (group V. uliginosum agg., northern bilberry) and Empetrum nigrum ssp. hermaphroditum (crowberry) plus several herbaceous and non-vascular species.

At the beginning of the experimental period, the 40 plots were assigned to 10 groups of four neighbouring plots (two larch and two pine trees per group) in order to facilitate the logistics of CO2 distribution and regulation. Half of these groups were randomly assigned to an elevated CO2 treatment while the remaining groups served as controls and received no additional CO2. In spring 2007, one plot of each tree species identity was randomly selected from each of the 10 CO2 treatment groups and assigned a soil warming treatment, yielding a balanced design with a replication of five individual plots for each combination of CO2 level, warming treatment and tree species.

#Data
Soil and air conditions have been monitored closely throughout the study period, with most measurements made during the combined CO2 x warming experiment (2007-2009).

carbon-dioxide

display_name: carbon-dioxide

climate-change

display_name: climate-change

experiment

display_name: experiment

soil-temperature

display_name: soil-temperature

vegetation

display_name: vegetation

education

fr: Education, science

de: Bildung, Wissenschaft

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: FACE: Stillberg CO2 enrichment and soil warming study


maintainer: EnviDat Support

en: urban-landscape landscape-planning land-change urban-planning concur

media_type: .pdf

en:
Book of abstracts from the virtual conference "From Plans to Land Change: Dynamics of Urban Regions"

Cities and urban regions are among the most dynamic land-use systems in the world, with dramatic consequences for the provision of ecosystem services and the livelihood of people. Planning is a multifaceted activity with extensive experience in the management of these urbanization processes. However, our understanding of planning’s contribution to shaping urban land use, form and structure is still incomplete, with serious consequences for the efficacy of urban planning and land change models.

This international conference aims to bring together the community of scholars working on planning evaluation and urban modelling. The participants are offered the opportunity to present their current research and to discuss how theoretical developments, data sources, comparative studies and modelling approaches might advance the field.

The conference was financially supported by the CONCUR project and sustained by Swiss Federal Research Institute WSL.

concur

display_name: concur

land-change

display_name: land-change

landscape-planning

display_name: landscape-planning

urban-landscape

display_name: urban-landscape

urban-planning

display_name: urban-planning

en: From Plans to Land Change: Dynamics of Urban Regions. Book of Abstracts


maintainer: Sofia Pagliarin

en: milan barcelona imperviousness soil-sealing urban-atlas copernicus

media_type: CSV

en: Information on data sources

format: CSV

media_type: .csv

media_type: mpk

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas

en: Soil sealing Barcelona and Milan different territorial levels


en: plants soil-moisture ecological-maps landolt switzerland ecological-indicator-values soil-ph soil-mapping

en: Description

en: Description of the predictors provided in this dataset

format: XLS

en: Predictors

en: Predictors generated and used in Descombes et al. (2020)

en:
Ecologically meaningful predictors are often neglected in plant distribution studies, resulting in incomplete niche quantification and low predictive power of species distribution models (SDMs). Because environmental data are rare and expensive to collect, and because their relationship with local climatic and topographic conditions are complex, mapping them over large geographic extents and at high spatial resolution remains a major challenge. Here, we derived environmental data layers by mapping ecological indicator values (EIVs) in space by using a large set of environmental predictors in Switzerland.

This dataset contains the predictors (raster layers) generated and used in the following publication (Descombes et al. 2020). Only predictors for which we have the rights to share them are provided. Other datasets and predictors can be accessed via the original data provider. Details on the predictors and sources are fully described in the publication. The predictors are provided as GeoTIFF files, at 93 m spatial resolution and Mercator projection ("+proj=merc +lon_0=0 +k=1 +x_0=0 +y_0=0 +ellps=WGS84 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs"). The excel file (xlsx) provides a short description of the raster layers.

Paper Citation:

Descombes, P. et al. (2020). Spatial modelling of ecological indicator values improves predictions of plant distributions in complex landscapes. Ecography. (accepted)

ecological-indicator-values

display_name: ecological-indicator-values

ecological-maps

display_name: ecological-maps

landolt

display_name: landolt

plants

display_name: plants

soil-mapping

display_name: soil-mapping

soil-moisture

display_name: soil-moisture

soil-ph

display_name: soil-ph

switzerland

display_name: switzerland

education

en: Education and science


en: snow-precipitation orographic-precipitation complex-terrain cosmo-wrf precipitation-variability

en: StationData

en: Snow depth maps over Dischma valley for 26 January 2016 and 9 March 2016 and snow depth differences between the two dates.

en:
The data presented here corresponds to the publication "Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain" (Gerber et al., 2018a), which investigates the precipitation variability of snow precipitation in the central northern part of the Grisons (CH) and the publication "The importance of near-surface winter precipitation processes in complex alpine terrain" (Gerber et al., 2018b). The dataset contains:

* WRFsimulations: WRF simulation output for simulations with 4x (14x) terrain smoothing with an output timestep of 30 min/5 min and horizontal grid spacings of 1350 m, 450 m, 150 m and 50 m (currently: data available upon request).
* StationData: Meteorological station data of 18 meteorological stations in the central northern part of the Grisons with 30 minute resolution for the period 1 January 2016 till 1 May 2016.
* ADS80data: Photogrammetrically determined snow depth distribution data over the Dischma valley for the 26 January 2016 and 9 March 2016. Snow heights are corrected for buildings, vegetation (> 1m), outliers, and pixles, which are obivously snow-free on the pictures (Bühler et al., 2015). In addition the snow depth differences (snow depth on 9 March 2016 minus snow depth on 26 January 2016) are provided.

For more details about the simulation and observation data, see Gerber et al., 2018 and Gerber and Sharma (2018).

Publications:

Bühler, Y., Marty, M., Egli, L., Veitinger, J., Jonas, T., Thee, P., and Ginzler, C.: Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9, 229–243, doi:10.5194/tc-9-229-2015, 2015.

Gerber, F., Besic, N., Sharma, V., Mott, R., Daniels, M., Gabella, M., Berne, A., Germann, U., and Lehning, M.: Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain, The Cryosphere, 12, 3137–3160, doi:10.5194/tc-12-3137-2018, 2018.

Gerber, F., Mott, R. and Lehning, M.: The importance of near-surface winter precipitation processes in complex alpine terrain, Journal of Hydrometeorology, accepted, 2018.

Gerber, F., and Sharma, V.: Running COSMO-WRF on very-high resolution over complex terrain. Laboratory of Cryospheric Sciences CRYOS, École Polytechnique Fédérale de Lausanne EPFL, Lausanne, Switzerland. doi:10.16904/envidat.35, 2018.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

orographic-precipitation

display_name: orographic-precipitation

precipitation-variability

display_name: precipitation-variability

snow-precipitation

display_name: snow-precipitation

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: DISCHMEX - High-resolution WRF simulations in complex alpine terrain and station measurements


en: urban-ecology landscape place-attachment electrodermal-activity sense-of-place

en: 03. Publication Ready Data

media_type: ZIP

en: 01. EDA Processed Data

en: 02. Questionnaire Data

en: 05. Visuals

en: 04. Scripts

en: 00. EDA Raw Data

en: This repository contains data on EDA measurements of visitors with different cultural backgrounds in virtual urban park settings. The parks are a Persian garden (Shiraz, Iran) and a historical park in Zurich, Switzerland. The cultural background of the visitors is Persian and Central European. The repository contains raw data from EDA, processed time series and statistical procedures.

electrodermal-activity

display_name: electrodermal-activity

landscape

display_name: landscape

place-attachment

display_name: place-attachment

sense-of-place

display_name: sense-of-place

urban-ecology

display_name: urban-ecology

en: Electrodermal Activity (EDA) of Bi-cultural Visitors In Virtual Park Settings


en: snowmelt climate-change discharge precipitation soil-moisture hydrology

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of the 307 medium-sized catchments in Switzerland. The "gridcode" provides the ID of the catchment used in the datafiles.

en: Daily simulated data for the reference period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the reference period 1981-2017 in mm.

en: Daily simulated data for the future period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the period 1981-2100 in mm for the 307 catchments.

en:
Daily discharge and the related hydro-meteorological variables precipitation, snowmelt, and soil moisture are provided for current (1981-2017) and for future climate conditions (1981-2100) for 307 medium-sized catchments in Switzerland. The catchments have a median catchment area of 117 km². The 307 catchments together form a set representative of the climatological conditions and runoff characteristics in Switzerland. The four variables were simulated at a daily resolution using the hydrological model PREVAH. PREVAH is a conceptual process-based model that was run in this study in its fully distributed version on a 500 m grid (Viviroli et al. 2009a). For the calibration, runoff time series from 140 mesoscale catchments covering the different runoff regimes were used. The model calibration was conducted over the period 1993-1997. Verification was performed on the period 1983-2005 using (i) volumetric deviation (Viviroli et al. 2007) and (ii) benchmark efficiency (Schäfli et al 2007) as objective functions. The calibration and validation procedures are described in detail in Köplin et al. (2010). The parameters for each model grid cell were derived by regionalizing the parameters obtained for the 140 catchments with a procedure based on ordinary kriging (Viviroli et al. 2009b, Köplin et al. 2010).
The calibrated and validated model was then driven with transient meteorological data (precipitation, temperature, radiation, and wind) representing both reference (1981-2017) and future climate conditions (2018-2099). The data were derived from the CH2018 climate scenarios (NCCS 2018) provided by the Swiss National Centre for Climate Services (NCCS). They were obtained from climate experiments produced with different climate modeling chains, consisting of a global and a regional circulation model each, within EUROCORDEX for three representative concentration pathways (RCP) emission scenarios. Downscaled output of ten climate model chains derived by quantile mapping were considered. The focus was on the chains of the EUR-11 domain with a horizontal resolution of 0.11 degrees (roughly 12.5 km). The climate model chains (GCM, RCM, RCP, and grid resolution) used are listed below:

- ICHEC-EC-EARTH	DMI-HIRHAM5	2.6	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	4.5	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	8.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	2.6	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	4.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	8.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	4.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	8.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	4.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	8.5	EUR-11

*References*:

-	Köplin, N., D. Viviroli, B. Schädler, and R. Weingartner (2010), _How does climate change affect mesoscale catchments in Switzerland? - A framework for a comprehensive assessment_, Advances in Geosciences, 27, 111-119, doi:10.5194/adgeo-27-111-2010.
-	National Centre for Climate Services (2018), CH2018 - _Climate Scenarios for Switzerland_, Tech. rep., NCCS, Zurich.
-	Schäfli, B., and H. V. Gupta (2007), _Do Nash values have value?_, Hydrological Processes, 21, 2075-2080, doi:10.1002/hyp.6825.
-	Viviroli, D., J. Gurtz, and M. Zappa (2007), _The hydrological modelling system PREVAH. Part II - Physical model description_, Geographica Bernensia, 40, 1-89.
-	Viviroli, D., M. Zappa, J. Gurtz, and R. Weingartner (2009a), _An introduction to the hydrological modelling system PREVAH and its pre- and post-processing-tools_, Environmental Modelling & Software, 24, 1209-1222, doi:10.1016/j.envsoft.2009.04.001.
-	Viviroli, D., H. Mittelbach, J. Gurtz, and R. Weingartner (2009b), _Continuous simulation for flood estimation in ungauged mesoscale catchments of Switzerland-Part II: Parameter regionalisation and flood estimation results_, Journal of Hydrology, 377 (1), 208-225, doi:10.1016/j.jhydrol.2009.08.022.

climate-change

display_name: climate-change

discharge

display_name: discharge

hydrology

display_name: hydrology

precipitation

display_name: precipitation

snowmelt

display_name: snowmelt

education

en: Education and science

en: Simulated future discharge and climatological variables for medium-sized catchments in Switzerland


en: ice-nucleation clouds raclets backward-trajectories aerosol

media_type: text/csv

mimetype: text/csv

en: This dataset contains number concentrations of ice-nucleating particles active at -15 °C observed at Weissfluhjoch during February and March 2019, as well as complementary data (measured aerosol number concentrations and modelled total precipitation along air mass trajectories). This data formed the basis of our paper with the title “Towards parameterising atmospheric concentrations of ice-nucleating particles active at moderate supercooling”.

aerosol

display_name: aerosol

backward-trajectories

display_name: backward-trajectories

clouds

display_name: clouds

ice-nucleation

display_name: ice-nucleation

raclets

display_name: raclets

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Ice nucleating particle concentrations active at -15 °C at Weissfluhjoch


maintainer: EnviDat

en: research-data-management meteorological-data-format csv nead metadata-convention

en: NEAD syntax v0.1 (EBNF)

media_type: text/plain

format: TXT

mimetype: text/plain

en: NEAD on GitHub

media_type: HTML

format: HTML

en: PyNEAD (future reference implementation)

en: MeteoIO (future reference implementation)

media_type: text/html

mimetype: text/html

en:
Acknowledgement: The NEAD format includes NetCDF metadata and is proudly inspired by both SMET and NetCDF formats. NEAD is designed as a long-term data preservation and exchange format.

The NEAD specifications were presented at the "WMO Data Conference 2020 - Earth System Data Exchange in the 21st Century" (Virtual Conference).

-----------------------

Summary:
The Non-Binary Environmental Data Archive (NEAD) format is being developed as a generic and intuitive format that combines the self-documenting features of NetCDF with human readable and writeable features of CSV. It is designed for exchange and preservation of time series data in environmental data repositories.

License: The NEAD specifications are released to the public domain under a Creative Commons CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

csv

display_name: csv

metadata-convention

display_name: metadata-convention

meteorological-data-format

display_name: meteorological-data-format

nead

display_name: nead

research-data-management

display_name: research-data-management

en: Non-Binary Environmental Archive Data (NEAD) format


en: snow erosion sediment-transport model mars

en: Datasets of Figure 3a

en: Datasets of Figure 3b

en: Datasets of Figure 2

en: Datasets of Figure 4b

en: Datasets of Figure 4a

en:
The files contain the datasets used to produce Figures 2, 3, and 4 of the manuscript ([doi: 10.1002/2016GL071822](http://dx.doi.org/10.1002/2016GL071822)).

 Manuscript Abstract:
Despite being the main sediment entrainment mechanism in aeolian transport, granular splash is still poorly understood. We provide a deeper insight into the dynamics of sand and snow ejection with a stochastic model derived from the energy and momentum conservation laws. Our analysis highlights that the ejection regime of uniform sand is inherently different from that of heterogeneous sand. Moreover, we show that cohesive snow presents a mixed ejection regime, statistically controlled either by energy or momentum conservation depending on the impact velocity. The proposed formulation can provide a solid base for granular splash simulations in saltation models, leading to more reliable assessments of aeolian transport on Earth and Mars.

erosion

display_name: erosion

mars

display_name: mars

model

display_name: model

sediment-transport

display_name: sediment-transport

snow

display_name: snow

en: Energy- and momentum-conserving model of splash entrainment in sand and snow saltation


maintainer: Paraskevi Georgakaki

en: ice-water-content blowing-snow secondary-ice-production liquid-water-content jungfraujoch wrf swiss-alps ice-crystal-number-concentration

en: Observational data

media_type: zip-compressed folder of csv

en:
The .zip file contains 6 .csv files including all microphysical measurements taken at the Jungfraujoch station during the two periods of interest:

* 25-28 January 2014 : northwesterly-winds (NW)
* 29 January - 1 February 2014 : southeasterly-winds (SE)

The total Ice Crystal Number Concentration (ICNC; reported in L⁻¹) is measured by the two-dimensional stereo hydrometeor spectrometer (2D-S; Lawson et al., 2006) over the size range 10-1280 μm. The total ice water content (IWC; reported in gm⁻³) is also derived by the 2D-S data using the Brown and Francis (1995) mass-diameter relationship. Finally, the quantification of the liquid water content (LWC; reported in gm⁻³) is based on the liquid droplet size distribution data derived from a DMT cloud droplet probe (CDP; Lance et al., 2010) over the size range 2-50 μm. The frequency of the measurements in the .csv files is 30 min, to match the output frequency of the model. Datetime is also reported in the files (DD/MM/YYYY h:mm) in UTC.

Acknowledgment: Collection and pre-processing of the microphysical measurements has been performed by Gary Lloyd (gary.lloyd@manchester.ac.uk). More details about the instrumentation during the CLACE2014 campaign can be found in Lloyd et al. (2015).

en: WRF outputs

media_type: zip-compressed folder of NetCDF files

en:
The .zip file contains all the NetCDF outputs produced by the mesoscale Weather Research and Forecasting (WRF) model (version: 4.0.1). Two case studies were simulated in this study, between 25-28 January 2014 (00:00 UTC) and 29 January - 1 February 2014 (00:00 UTC), respectively. The former is denoted as "NW" and the latter as "SE", owing to the prevailing wind conditions at the Jungfraujoch (JFJ) station.

The outputs come from the innermost domain of the simulations with a spatial resolution of 1 km and are extracted from the nearest to JFJ model grid point (46.55°N 7.98°E). The dimensions of each model variable is [145,100], which corresponds to time and height, respectively. The frequency of the outputs is 30 min. Note that the first 24 hours of each simulation (i.e., the first 48 outputs) were considered spin up time.

The following sets of sensitivity simulations were presented in this study:

* CNTRL_NW.nc, CNTRL_SE.nc : Sensitivity simulations performed with the default version of WRF
* DS_PHILL_NW.nc, DS_PHILL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Phillips et al. (2018)
* DS_SULL_NW.nc, DS_SULL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Sullivan et al. (2018)
* PHILL_NW.nc, PHILL_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Phillips et al. (2017)
* TAKAH_NW.nc, TAKAH_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Sullivan et al. (2018) based on Takahashi et al. (1995)
* TAKAHrim_NW.nc, TAKAHrim_SE.nc : Same set-up as before but applied only to collisions between rimed ice particles
* BIPS_Xk0_DY_NW.nc, BIPS_Xk0_DY_SE.nc : Sensitivity simulations including a source of Xk0 (either 10.0 or 100.0 L⁻¹) ice crystals with sizes of DY (either 10 or 100 μm) in the first atmospheric level of the model
* BIPS100_PHILL_NW.nc, BIPS100_PHILL_SE.nc : Sensitivity simulations where the combined effect of blowing snow and ice-ice collisional break-up is examined

en:
This repository contains all WRF model outputs and observational data sets used for the paper:
Georgakaki, P., Sotiropoulou, G., Vignon, É., Billault-Roux, A.-C., Berne, A., and Nenes, A.: Secondary ice production processes in wintertime alpine mixed-phase clouds, Atmos. Chem. Phys. Discuss., https://doi.org/10.5194/acp-2021-760, in review, 2021.

blowing-snow

display_name: blowing-snow

ice-crystal-number-concentration

display_name: ice-crystal-number-concentration

ice-water-content

display_name: ice-water-content

jungfraujoch

display_name: jungfraujoch

liquid-water-content

display_name: liquid-water-content

secondary-ice-production

display_name: secondary-ice-production

swiss-alps

display_name: swiss-alps

wrf

display_name: wrf

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data for the publication "Secondary ice production processes in wintertime alpine mixed-phase clouds"


maintainer: Frank Techel

en: switzerland norway rutschblock-test extended-column-test avalanche-danger avalanche-observations

en: avalanche occurrence data (Norway, Sitzerland) - avalanche sizes per day and warning region

en: avalanche occurrence data (Norway, Sitzerland) - largest avalanche size per day and warning region

en: Rutschblock data (Switzerland)

en: ECT data (Norway, Switzerland)

en:
Observational data used to quantitatively describe the key elements describing avalanche danger: snowpack stability, the frequency distribution of snowpack stability, and avalanche size.
The data set consists of
- Rutschblock test results (Switzerland)
- Extended Column Test results (Switzerland, Norway)
- Avalanche occurrence data (Switzerland, Norway).
The data were extracted from the respective operational databases of the national avalanche warning services in Switzerland (WSL Institute for Snow and Avalanche Research SLF Davos, Switzerland) and Norway (The Norwegian Water Resources and Energy Directorate NVE).
For further information regarding the data, please refer to the publication or contact the author.

avalanche-danger

display_name: avalanche-danger

avalanche-observations

display_name: avalanche-observations

extended-column-test

display_name: extended-column-test

norway

display_name: norway

rutschblock-test

display_name: rutschblock-test

switzerland

display_name: switzerland

en: Stability tests, avalanche observations, Switzerland, Norway


en: digital-elevation-model open-source geoinformation-system geodata-processing digital-planning cable-yarding raster-processing seilaplan qgis-plugin swiss-geodata

en: View video on youtube!

en: DHM-Kacheln zusammenfügen

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. In this tutorial video, we show how to merge multiple DTM raster tiles into one file, using the QGIS tool ‘Virtual Raster’. This simplifies the digital planning of a cable line using the QGIS plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to Seilaplan website: https://seilaplan.wsl.ch

***************************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. In diesem Tutorialvideo zeigen wir, wie man mit dem QGIS-Plugin Virtuelles Raster mehrere DHM-Kacheln zu einem einzigen Rasterfile zusammenfügen und abspeichern kann. Für die Seillinienplanung mit Seilaplan muss nun nur noch eine Datei, mein neues virtuelles Raster, ausgewählt werden.

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geodata-processing

display_name: geodata-processing

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

raster-processing

display_name: raster-processing

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

en: Seilaplan Tutorial: Merge DTM tiles


maintainer: Felix Neff

en: topsoil-removal grassland diversity functional-traits functional-diversity restoration insects long-term-experiment

en: Insect abundance

en:
Abundance of adult insects recorded in the samplings on all experimental sites

- **Plot**: ID of Plot
- **Treatment**: Experimental treatment
- **Species**: Insect species name (following [Fauna Europaea](https://fauna-eu.org))
- **Author**: Author and year of species' description (following [Fauna Europaea](https://fauna-eu.org))
- **Group**: Insect group as used in the analyses
- **Number_Adults**: Number of adult individuals recorded
- **Herbivore**: Logical indicating whether the species is feeding as a herbivore (*TRUE*) or not (*FALSE*)

en: Insect traits

en:
Functional traits of all herbivorous insect species sampled in the study.

- **Species**: Insect species name (following [Fauna Europaea](https://fauna-eu.org))
- **Author**: Author and year of species' description (following [Fauna Europaea](https://fauna-eu.org))
- **Group**: Insect group as used in the analyses
- **Body volume**: Body volume determined by body length, body width and body height (in mm$^3$)
- **Body_shape**: Ratio of body length to body width
- **Hind_femur_shape**: Ratio of hind-femur length to hind-femur width
- **Hind_front_leg_ratio**: Ratio of front-leg length to hind-leg length (leg length = femur length + tibia length)
- **Wing_length_rel**: Ratio of wing length to body length
- **Leg_length_rel**: Ratio of front-leg length to body length (leg length = femur length + tibia length)
- **Antenna_length_rel**: Ratio antenna length to body length
- **Eye_width_rel**: Ratio of eye width to head width (Auchenorrhyncha, Heteroptera) / to head height (Orthoptera)
- **Feeding_specialization**: Insect specialization on food source (*m*: monophagous, *o*: oligophagous, *p*: polyphagous)
- **Feeding_tissue**: Feeding tissue used for feeding (*c*: chewers, *x*: xylem, *p*: phloem, *m*: mesophyll, *m-p/r*: mesophyll as well as phloem and/or reproductive organs, *r*: reproductive organs, *se*: ripe seeds)
- **Hibernation**: Hibernation stage (*e*: egg, *e/n*: egg and nymph, *n*: nymph, *a*: adult)
- **Generations**: Number of generations per year (*1.5* stands for *1-2* generations per year)
- **Moisture_pref_mean**: mean of preferred habitat moistures (*1*: xerophilous, *2*: moderately xerophilous, *3*: moderately mesohygrophilous, *4*: mesohygrophilous, *5*: moderately hygrophilous, *6*: hygrophilous, *7*: moderately hydrophilous, *8*: hydrophilous)
- **Moisture_pref_range**: range of preferred habitat moistures (indicating degree of specialization)

en: Plot information

en:
Information on the experimental plots.

- **Plot**: ID of Plot
- **Treatment**: Experimental treatment
- **Landuse_history**: recent agricultural use for Initial; agricultural use before restoration for all restored sites
- **Last_tilled**: Last time the site was tilled
- **Intensity**: Frequency and intensity of mowing and manuring (*intensity1*: mowing once and no manure, i*ntensity2*: 2-3 times mowing and no manure, *intensity3*: 2-3 times mowing and manuring, *intensity4*: 4-5 times mowing and manuring)
- **Slope**: slope gradient according to classes defined by FAO (1990)
- **X**: X coordinate of the plot (CH1903)
- **Y**: Y coordinate of the plot (CH1903)
- **Cluster**: Spatial cluster of the plot

en:
This dataset contains all data, on which the following publication below is based.

**Paper Citation**:

Neff, F., Resch, M. C., Marty, A., Rolley, J. D., Schütz, M., Risch, A. C, Gossner, M. M. 2020. Long-term restoration success of insect herbivore communities in semi-natural grasslands: a functional approach. Ecological Applications, 30, e02133. [10.1002/eap.2133](https://doi.org/10.1002/eap.2133)

Please cite this paper together with the citation for the datafile.

 Methods

 Study site
The study area is situated within and nearby to Eigental nature reserve (47°27’36” to 47°29’06” N, 8°37’12” to 8°37’44” E, 461 to 507 m a.s.l.) in the vicinity of Zurich airport (Canton Zurich, Switzerland). Mean annual precipitation and temperature is 903 ± 136 mm and 9.14°C ± 0.50°C (mean ± SD for 2007-2017 (*MeteoSchweiz 2018*)). In 1967, the Eigental nature reserve was established to protect small and isolated remnants of species-rich, semi-natural grasslands (roughly 12 ha), which were embedded in an otherwise intensively managed landscape. It is characterized by oligo- to mesotrophic Molinion (semi-wet, matrix species *Molinia caerulea*) and Mesobromion (semi-dry, matrix species *Bromus erectus*) meadows (*Delarze et al. 2015*), reflecting small-scale habitat heterogeneity, mainly due to site-specific groundwater levels and slope inclination. As in most Central European grasslands, management is necessary to prevent shrub and tree invasions as well as to secure low levels of available soil nutrients and thus to maintain these species-rich habitats ([*Poschlod and WallisDeVries 2002*](https://doi.org/10.1016/S0006-3207(01)00201-4)).
In 1990, the government of the Canton Zurich decided to enlarge the Eigental nature reserve as a counter measure against degradation and biodiversity loss in semi-natural grasslands due to overutilization and the excessive input of nutrients (mostly nitrogen). Eleven patches of adjacent intensively managed grassland (in total roughly 20 ha) were targeted to be transformed into semi-natural grasslands. As a first restoration measure, fertilization was ceased, and biomass harvested three times to remove excessive soil nutrients from the original system and thus benefit plant species with low competitive ability on the long run. In 1995, the restoration efforts were increased and a large-scale experiment comprising three restoration measures with increasing intervention intensities was implemented:

- **Harvest only**: Initial restoration measures were continued with mowing and removing of the aboveground biomass two times a year (early summer and autumn).
- **Topsoil**: Removal of topsoil, depending on the thickness of the A horizon the upper 10 to 20 cm, in four randomly selected areas within the eleven patches in late autumn 1995. The size of the restoration area depended on individual patch size (2700 to 7000 m2).
- **Topsoil + Propagules**: Plant propagules were added on half of the area where topsoil was removed via application of fresh, seed-containing hay and hand-collected propagules of target species originating from semi-dry and semi-wet species-rich grasslands with local and regional provenance (within radius of 7 to 30 km) (1995, 1996, 1997).

Management of *Topsoil* and *Topsoil + Propagules* started five years after treatment implementation and included yearly mowing and removing of aboveground biomass (late summer or early autumn). The experiment was complemented with intensively managed grassland sites that share the same agricultural history as the restored sites (**Initial**; swards dominated by *Lolium perenne*, *L. multiflorum* and *Trifolium repens*): mowing and subsequent fertilizing (manure) up to five times a year, as well as different tillage regimes. Finally, sites were selected in target semi-dry and semi-wet grasslands (**Target**) located within the Eigental nature reserve and another nature reserve nearby (Altläufe der Glatt; 47°28’29” to 47°27’41” N, 8°31’56” to 8°32’26” E, 418 to 420 m a.s.l.). The selected target sites are mown and aboveground biomass removed once a year in late summer or early autumn. For each of the five treatments, we selected eleven plots (5 m × 5 m) spread across the sites. Altogether, the experiment included 55 plots.

 Arthropod sampling
Aboveground arthropods were sampled using suction sampling on four consecutive days in early July 2017 before the grasslands were mown. Arthropods were sampled in two locations on each 5 m × 5 m plot, once in the south-western and once in the north-eastern corner to account for possible spatial heterogeneity within the plots. Arthropods were sorted to order or lower taxonomic levels and individuals were identified to species level. We focused on three groups (Hemiptera: Auchenorrhyncha, Hemiptera: Heteroptera, Orthoptera),

 Functional traits
We used two sets of functional traits in this study.

**Morphometric traits**:
Body volume, body shape, hind femur shape, hind/front leg ratio, wing length, leg length, antenna length and eye width. We used trait measurements from [*Simons et al. (2016)*](http://dx.doi.org/10.1890/15-0616.1) and [*Neff et al. (2019)*](https://doi.org/10.1007/s10980-019-00872-1) and complemented them with measurements on study specimens. These measurements were conducted using a high-resolution measuring stereo microscope (Leica DVM6, Leica Microsystems) including automated high-resolution photo stacking with the software Leica Application Suite X (LAS X, © 2018 Leica Microsystems CMS GmbH) and Leica Map Premium (Leica Microsystems, © 1996-2017 Digital Surf) at WSL Birmensdorf. The eight morphometric traits were calculated from direct measurements of body parts on specimens of all sampled species. From each species, we measured at least one female and one male specimen. Additionally, for species that show wing dimorphism, we included the different wing morphs and weighted them by their prevalence reported in literature. For few species, of which not all wing morphs were available for measurements (10 cases), we estimated relative wing length from congeneric species or from the literature.

**Life-history traits**
Based on an existing data set collected by [*Gossner et al. (2015)*](http://dx.doi.org/10.1890/14-2159.1). We included traits describing different life-history characteristics of herbivore insect species, namely: feeding specialization, feeding tissue, hibernation stage and number of generations per year, which are related to insect species’ vulnerability to changes in plant community composition, microhabitat use and disturbance tolerance. To represent potential changes in habitat moisture with abandonment of intensive land use (e.g., change in ground-water level), we also included two traits related to preferred habitat moisture of the study species: moisture preference, describing species’ optimum habitat moisture, and moisture range, which describes the species’ range of preferable moisture conditions.

 References

Delarze, R., Y. Gonseth, S. Eggenberg, and M. Vust. 2015. Lebensräume der Schweiz: Ökologie - Gefährdung - Kennarten. 3rd ed. Ott, Bern.

Gossner, M. M., N. K. Simons, R. Achtziger, T. Blick, W. H. O. Dorow, F. Dziock, F. Köhler, W. Rabitsch, and W. W. Weisser. 2015. A summary of eight traits of Coleoptera, Hemiptera, Orthoptera and Araneae, occurring in grasslands in Germany. Scientific Data 2:150013.

MeteoSchweiz. 2018. Klimabulletin Jahr 2017. MeteoSchweiz, Zürich.

Neff, F., N. Blüthgen, M. N. Chisté, N. K. Simons, J. Steckel, W. W. Weisser, C. Westphal, L. Pellissier, and M. M. Gossner. 2019. Cross-scale effects of land use on the functional composition of herbivorous insect communities. Landscape Ecology 34:2001–2015.

Poschlod, P., and M. F. WallisDeVries. 2002. The historical and socioeconomic perspective of calcareous grasslands—lessons from the distant and recent past. Biological Conservation 104:361–376.

Simons, N. K., W. W. Weisser, and M. M. Gossner. 2016. Multi-taxa approach shows consistent shifts in arthropod functional traits along grassland land-use intensity gradient. Ecology 97:754–764.

diversity

display_name: diversity

functional-diversity

display_name: functional-diversity

functional-traits

display_name: functional-traits

grassland

display_name: grassland

insects

display_name: insects

long-term-experiment

display_name: long-term-experiment

restoration

display_name: restoration

topsoil-removal

display_name: topsoil-removal

en: Grassland restoration: insects and insect traits


maintainer: Sebastian Schlögl

en: atmospheric-turbulence atmosphere snow turbulent-sensible-heat-fluxes stable-boundary-layer

en: Turbulence data AA00

en: sensor in 1 m height

en: Turbulence data PM07

en: NWW

en: SEE

en: Turbulence data WFJ07

en: upper sensor

en: sensor in 25 m height

en: sensor in 0.2 m height

en: lower sensor

en: Turbulence data GR00

en: sensor in 2 m height

en: Turbulence data WFJ11

en:
We used five different atmospheric turbulence datasets from four test sites, with these sites showing differences in their topographical characteristics. We chose one typical alpine test site with high topographical complexity (Weissfluhjoch, Davos, Switzerland) and three test sites consisting of one glacier site (Plaine Morte, Crans-Montana, Switzerland) and two polar sites (Greenland and Antarctica) representing a quasi-ideal site with homogeneous surface and quasi infinite fetch in all directions.
The turbulent sensible heat flux was calculated using the eddy-covariance method. Note that the sonic temperature fluctuations have been converted into virtual temperature fluctuations.
Three-dimensional wind velocity and air temperature were processed using a linear detrending (Rannik and Vesala, 1999) and a planar fit approach (Massmann and Lee, 2002) to rotate the coordinate system. Air temperature, relative humidity and air pressure from weather stations were used to calculate air properties, which are required for the data processing. The weather stations are located in the immediate vicinity of the turbulence tower and are affected by the same air masses. Turbulence data were averaged to 30-min intervals, whilst changing to a 15-min time interval marginally affects the heat fluxes at the Weissfluhjoch test site (Mott et al., 2011). Note that we define a negative sensible heat flux as being directed towards the snow surface and a positive sensible heat flux as being directed upwards.
The selected datasets and corresponding test sites are briefly introduced below:

Weissfluhjoch 2007 (WFJ07): A vertical set-up of two three-dimensional ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) was used at the traditional field site Weissfluhjoch (2540 m asl.) to measure three-dimensional wind velocity and air temperature at a frequency of 20 Hz. The sensors were mounted 3 m and 5 m above the ground and provided reliable data for 50 days between 11 February 2007 and 24 April 2007. Further information on the field campaign can be found in Stössel et al. (2010) and Mott et al. (2011).

Weissfluhjoch 2011-13 (WFJ11): Three-dimensional wind velocity and air temperature were recorded at 5 m above the ground at a frequency of 10 Hz with a three-dimensional ultrasonic anemometer (CSAT3). The analysis was conducted for data obtained between February and March in the years 2011-13.

Plaine Morte 2007 (PM07): Two three-dimensional ultrasonic anemometers (CSAT3) were installed on a horizontal boom facing opposite directions (west-north-west vs. east-south-east) at 3.75 m above the ground to measure air temperature and three-dimensional wind velocity at 20 Hz. The data were collected at the almost flat field site on the Plaine Morte glacier (2750 m asl.) near Crans-Montana, Switzerland from February to April 2007. High quality meteorological data were additionally recorded and used to force the model. A detailed description about the set-up at the Plaine Morte glacier can be found in Huwald et al. (2009) and Bou-Zeid et al. (2010).

Greenland 2000 (GR00): High-frequency three-dimensional ultrasonic anemometer measurements (CSAT3) were recorded at 50 Hz at the Summit Camp (72.3 °N, 38.8 °W, 3208 m asl.) located on the northern dome of the Greenland ice sheet. Data were collected at 1 m and 2 m above the snow surface during summer in 2000 and 2001. Additionally, meteorological measurements were obtained for the post processing and used to force the model. More information about the field campaign can be found in Cullen et al. (2007, 2014).

Antarctica 2000 (AA00): A set-up of three vertical three-dimensional ultrasonic anemometers (DA-600, Kaijo Denki) were installed at Mizuho Station (70°42' S, 44°20' E, 2230 m asl.) in Eastern Antarctica at 0.2, 1 and 25 m and recorded turbulence data at a frequency of 100 Hz from October to November 2000. Longwave and shortwave radiation, relative humidity, air and snow surface temperature were additionally measured and used to force the model. More information about the field campaign can be found in Nishimura and Nemoto (2005).

atmosphere

display_name: atmosphere

atmospheric-turbulence

display_name: atmospheric-turbulence

snow

display_name: snow

stable-boundary-layer

display_name: stable-boundary-layer

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

education

en: Education and science

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: How do stability corrections perform in the stable boundary layer over snow?


causal-effect-of-mfoz

title_for_slug: causal-effect-of-mfoz

en: selection-bias propensity-score-matching built-up-land-change the-major-function-oriented-zone fujian-province causality

en: Data and Stata code for repeating the results

en:
Data.xlsx is the variables of 952 townships
Table 1-2 NN(1-1)_noreplace_caliper(0.01).do is STATA code to produce the results in Table 1 and 2
Figure 5 Distribution of the propensity scores.R is R code rto produce Figure 5
Figure 5 Standard mean difference.R is R code rto produce Figure 5

en:
Title: Closer to causality: How effective is spatial planning in governing built-up land expansion in Fujian Province, China?

Research objective: The Major Function Oriented Zone (MFOZ), the first strategic spatial plan in China, is developed to achieve a coordinated regional development, through spatial regulation and zoning of development. The MFOZ he MFOZ divided land into four major function-oriented zones: The development-optimized zone, the development-prioritised zone, the development-restricted zone, and the development-prohibited zone. We used propensity score marching to evaluate the effect of the MFOZ on built-up land expansion in Fujian Province over three time intervals (2013–2015, 2013–2018 and 2013–2020).

Data: Data.xlsx contains the variables of 954 towns in Fujian Province.
Town_ID is the town unique ID;
County_ID is the county unique ID;
City_ID is the city unique ID;
MFOZ is the the development-prioritised zone and the development-restricted zone (The development-optimized zone and the development-prohibited zone are excluded);
Builtup_13_15 is the built-up land expansion from 2013 to 2015;
Builtup_13_18 is the built-up land expansion from 2013 to 2018;
Builtup_13_20 is the built-up land expansion from 2013 to 2020;
Dis2water is the Euclidean distance from the town to the nearest waterbody;
Slope is the the average slope within the town;
GDP is the average GDP in 2010 within the town;
Pop is the average population in 2010 within the town;
Road is the average population in 2010 within the town;
Dis2city is the Euclidean distance from the town to the nearest prefectural city centre;
Nei_Arable, Nei_Forest, and Nei_Built.up are the area of arable land, forest land, and built-up land neighbouring town i in 2010.

Method: we used the propensity score matching to compare the changes in the amount of built-up land in the towns of the development-prioritised zone with the matched towns of the development-restricted zone. Additionally, we used three evaluation intervals (2013–2015, 2013–2018 and 2013–2020) to evaluate temporal variation in the causal effect of the MFOZ on built-up land expansion.

built-up-land-change

display_name: built-up-land-change

causality

display_name: causality

fujian-province

display_name: fujian-province

propensity-score-matching

display_name: propensity-score-matching

selection-bias

display_name: selection-bias

the-major-function-oriented-zone

display_name: the-major-function-oriented-zone

en: EnviDat: the Environmental Data Portal

en: Causal effect of MFOZ


en: air-temperature humidity precipitation-amount shortwave-radiation snow-depth longwave-radiation

en: Latest data from Stillberg climate station

media_type: SMET

en: This dataset represents the latest data from the Stillberg climate station updated daily. Automated quality control procedures are applied but no manual checks as in the main dataset.

en: DATA ACCESS

en: Meteorological station data 1975-2016. Outlier analysis and general quality control has been carried out. Station was completely renovated in 2007 and instruments changed. A complete air temperature timeseries can be obtained by combining parameters "TA" and "AIR_TEMP_FUEHLER".

en: Overview plot

en: Overview plots of all variables in timeseries.

en: README

media_type: TXT

en: Description of station parameters and history.

en: Site photo 1

media_type: JPEG

en: Snow sensor perpendicular to slope.

en: Site photo 2

en: STB2 CSV

en: Stillberg meteo as CSV (see smet for metadata header)

en: Site photo 3

en: Longterm meteorological and snow station on a steep (c. 40 degrees) North-East exposed slope at 2090 m a.s.l above Davos, Switzerland. Established 1975 and ongoing measurements made, although instruments have changed during this period. The station is located within a experimental plantation that serves as avalanche protection to downslope communities as well as a unique site for treeline dynamics research.

air-temperature

display_name: air-temperature

humidity

display_name: humidity

longwave-radiation

display_name: longwave-radiation

precipitation-amount

display_name: precipitation-amount

shortwave-radiation

display_name: shortwave-radiation

snow-depth

display_name: snow-depth

en: Long-term meteorological and snow station at 2090 m a.s.l., Stillberg, Davos, Switzerland (1975 - present)


maintainer: Jana von Freyberg

en: stable-water-isotopes root-zone review ecohydrology endmember-mixing-models uncertainties plant-water-uptake

en: Data set of MEE-20-04-264

media_type: application/pdf

en: The following two tables contain information about the data sources of the values reported in Table 1 and 2 in the paper “Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources” published in the journal ‘Methods in Ecology and Evolution’.

format: PDF

mimetype: application/pdf

en: Data set of MEE-20-04-264 (CSV)

en: The following two tables contain information about the data sources of the values reported in Table 1 and 2 in the paper “Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources” published in the journal 'Methods in Ecology and Evolution'.

ecohydrology

display_name: ecohydrology

endmember-mixing-models

display_name: endmember-mixing-models

plant-water-uptake

display_name: plant-water-uptake

review

display_name: review

root-zone

display_name: root-zone

stable-water-isotopes

display_name: stable-water-isotopes

uncertainties

display_name: uncertainties

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data set of: Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources


maintainer: Leo Gallus Bont

en: geoprocessing accessible-forest openstreetmap seilaplan forest qgis

en: Digitised sample perimeter

en: Juypter Notebook for Data Preparation (online)

media_type: ipynb

en: Preview

media_type: image/png

mimetype: image/png

en: Railways vector data (close to the sample forest range)

en: Forest vector data (for sample forest range)

en: Power lines vector data (close to the area of the sample forest range)

en: Juypter Notebook for Data Preparation

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

forest

display_name: forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019


en: temperature par precipitation long-term climate-change meteo wind-speed swiss-forest-lab meteorology relative-humidity

en: Site aerial photo (Schänis)

en: Site aerial photo from both Schänis stations. Source: Google. 2016. Site aerial photo from both Schänis stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Forest station data (SCB)

media_type: CSV

en: Data file.

en: Data plot of the field station (SCF)

media_type: PDF

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the forest station (SCB)

en: Site photo of the forest station (SCB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Further details on the data repository

en: Meta data documentation.

en: Site photo of the field station (SCF)

en: Site photo of the field station from above (viewing downwards the slope).

en: Field station data (SCF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Schänis in Switzerland where one station is located within a natural mixed forest stand (SCB) with European beech (_Fagus sylvatica_; 130-150 yrs), European silver fir (_Abies alba_; 130-150 yrs) and European ash (_Fraxinus excelsior_; 130-150 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, SCF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Schänis is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Schänis, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1998 onwards


en: meteorology climate-change par wind-speed temperature swiss-forest-lab relative-humidity meteo long-term precipitation

en: Data plot of the forest station (NEB)

en: Site photo of the field station (NEF)

media_type: image/jpeg

en: Site photo of the field station from the side.

mimetype: image/jpeg

en: Field station data (NEF)

en: Site photo of the forest station (NEB)

en: Forest station data (NEB)

en: Data plot of the field station (NEF)

en: Site aerial photo (Neunkirch)

en: Site aerial photo from both Neunkirch stations. Source: Google. 2016. Site aerial photo from both Neunkirch stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Neunkirch in Switzerland where one station is located within a natural deciduous forest stand (NEB) with European beech (_Fagus sylvatica_; 160 yrs), sycamore maple (_Acer pseudoplatanus_; 160 yrs) and lime trees (_Tilia sp._; 110 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NEF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Neunkirch is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Neunkirch, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: climate-change-impact uncertainty cryosphere snow-water-equivalent natural-climate-variability rain-on-snow

en: climate realizations

en: The dataset contains for three variables (snow water equivalent, surface water input and liquid precipitation) 50 realizations of current and future climate periods for two time horizons (mid end end of century), two emission senarions (RCP 4.5 and 8.5) and 10 climate model chains (all EUR11 chains within CH2018). To quantify natural climate variability for projections of snow conditions and resulting rain-on-snow (ROS) flood events, a weather generator was applied to simulate inherently consistent climate variables for multiple realizations of current and future climates at 100 m spatial and hourly temporal resolution over a 12 x 12 km high-altitude study area in the Swiss Alps. The output of the weather generator was used as input for subsequent simulations with an energy balance snow model. The data was extracted in 2021 from original model output.

climate-change-impact

display_name: climate-change-impact

cryosphere

display_name: cryosphere

natural-climate-variability

display_name: natural-climate-variability

rain-on-snow

display_name: rain-on-snow

snow-water-equivalent

display_name: snow-water-equivalent

uncertainty

display_name: uncertainty

en: Multiple realizations of daily snow water equivalent, surface water input and liquid precipitation projections for mid- and late-century


soil-respiration-exclosure-experiment

title_for_slug: soil-respiration-exclosure-experiment

en: subalpine ungulates grassland soil-respiration grazing

en: Soil respiration Switzerland

en:
ID: Fence number

Year	:Year of sampling

mean.CO2: soil respiration measured with PP-systems SRC-1 soil respriation chamber attached to a EGM-4 infrared gas analyser; units CO2 g m-2 h-1

Grassland: Grasslands where fences were errected. Note that on large grasslands (STAB, GRIM, MING) 2 pairs of fences were errected (2 in short, 2 in tall-grass vegetation), on small grasslands (DADA, MARG, BOTS) only one pair of fences was errected (1 short-grass; one-tallgrass vegetation)

Fence: Fence number; un-even numbers on short-grass vegetation (1,3,5,7,9,11,13,15,17), even numbers on tall-grass vegetation (2,4,6,8,10,12,14,16,18)

Vegetation:	1 = shortgrass vegetation, 2 = tall-grass vegetation (9 replicate fences on each vegetation type)

Treatment	: 1 = all herbivores grazing, 2 = large ungulates (red deer, chamois) excluded

en:
Location of data collection
The Swiss National Park (SNP) is located in the southeastern part of Switzerland, and covers an area of 170 km2, 50 km2 of which is forested, 33 km2 is occupied by alpine and 3 km2 by subalpine grasslands. Elevations range from 1350 to 3170 m a.s.l., and mean annual precipitation and temperature are 871 mm and 0.6°C measured at the Park’s weather station in Buffalora (1980 m a.s.l.) between 1960 and 2009 (MeteoSchweiz 2011). Founded in 1914, the SNP received minimal human disturbance for almost 100 years (no hunting, fishing, or camping, visitors are not allowed to leave the trails). Large (> 1 ha) homogeneous patches of short- and tall-grass vegetation characterize the subalpine grasslands. The average vegetation height of short-grass vegetation is 2 to 5 cm. Red fescue (Festuca rubra L.), quaking grass (Briza media L.) and common bent grass (Agrostis tenuis Sipthrob) are the predominating plant species in this vegetation type. Tussocks of evergreen sedge (Carex sempervirens Vill.) and mat grass (Nardus stricta L.) are predominant in the tall-grass vegetation, which averages 20 cm in vegetation height (Schütz and others 2006). Short-grass vegetation developed in areas where cattle and sheep rested (high nutrient input) during agricultural land-use (from 14th century until 1914); tall-grass vegetation developed in areas where cattle and sheep used to graze, but did not rest (Schütz and others 2003, 2006). Herbivores were shown to consume > 60% of the biomass in short-grass compared to < 20% in tall-grass vegetation (Schütz and others 2006). The herbivore community present in the SNP can be divided into four groups based on body size/weight: large [red deer (Cervus elaphus L.) and chamois (Rupricapra rupricapra L.); 30 - 150 kg], medium [marmot (Marmota marmota L.) and snow hare (Lepus timidus L.); 3 – 6 kg], and small vertebrate herbivores (small rodents: e.g. Clethrionomys spp., Microtus spp., Apodemus spp.; 30 – 100 g) as well as invertebrates (e.g. grasshoppers, caterpillars, cicadas, < 5 g).

Experimental design
We selected 18 subalpine grassland sites (9 short-grass, 9 tall-grass vegetation). The sites were spread across the entire park on dolomite parent material at altitudes of 1975 to 2300 meters. At each site we established an exclosure network (fences) in spring 2009 (early June), immediately after snowmelt. Each exclosure network consisted of a total of five 2 × 3 m sized plots that progressively excluded the different herbivores listed above (further labeled according to the herbivore guilds that had access to the respective plots “All”, “Marmot/Mice/Invertebrates”, “Mice/Invertebrates”, “Invertebrates”, “None”). The “All” treatment was thus accessible to all herbivores, was not fenced and was located at least 5 m away from a 2.1 m tall and 7 × 9 m main fence that enclosed the other four treatments. This fence was constructed of 10 × 10 cm wooden posts and electrical equestrian tape (AGRARO ECO, Landi, Bern, Switzerland; 20 mm width) mounted at 0.7 m, 0.95 m, 1.2 m, 1.5 m and 2.1 m above the ground that were connected to a solar charged battery (AGRARO Sunpower S250, Landi, Bern, Switzerland). We also mounted non-electrically charged equestrian tape at 0.5 m to help exclude deer and chamois, yet allow marmots and hares to enter safely. Within each main fenced area we randomly established four 2 × 3 m plots: (1) The “Marmot/Mice/Invertebrates” plot remained unfenced, thus, with the exception of red deer and chamois, all herbivores were able to access the plot, (2) The “Mice/Invertebrates” plot consisted of a 90 cm high electric sheep fence (AGRARO Weidezaunnetz ECO, Landi, Bern, Switzerland; mesh size 10 × 10 cm) connected to the solar panel and excluded all medium sized mammals (marmots, hares), but provided access for small mammals and invertebrates, (3) The “Invertebrates” plot provided access for invertebrates only and was surrounded by 1 m high metal mesh (Hortima AG, Hausen, Schweiz; mesh size 2 × 2 cm), (4) The “None” plot was surrounded by a 1 m tall mosquito net (Sala Ferramenta AG, Biasca, Switzerland; mesh size 1.5 × 2 mm) to exclude all herbivores. This plot was covered with a roof constructed of a wooden frame lined with mosquito mesh that was mounted on the wooden corner posts. We also treated this plot with a biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) when needed to remove insects that might have entered during data collection or that hatched from the soil.

!!! The here published data set only contains data for “All”, and “Marmot/Mice/Invertebrates” (= ungulates excluded) plots !!!

Data collection
In-situ soil CO2 emissions were measured with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA) on two randomly selected locations on one subplot within each of the 90 plots. For each measurement the soil chamber (15 cm high; 10 cm diameter) was placed on a permanently installed PVC collar (10 cm diameter) driven five centimeters into the soil at the beginning of the study (June 2009). The measurements were conducted between 0900 and 1700 hours every two weeks from early to early September 2009, 2010, 2011 and 2013. Freshly germinated plants growing within the PVC collars were removed prior to each measurement to avoid measuring plant respiration/photosynthesis. The two measurements collected per plot every two weeks were averaged.

Please acknowledge the funding of the study: funded by the Swiss National Science Foundation, SNF grant-no 31003A_122009/1 to Anita C. Risch, Martin Schütz and Flurin Filli

grassland

display_name: grassland

grazing

display_name: grazing

soil-respiration

display_name: soil-respiration

subalpine

display_name: subalpine

ungulates

display_name: ungulates

en: Soil respiration - exclosure experiment


en: gemstock meteo-station shortwave-radiation snow-height longwave-radiation

en: DATA ACCESS

en:
Meteo data at Gemsstock [Level 2 dataset](http://models.slf.ch/p/dataset-processing/).

fields      = timestamp TSS HS VW DW VW_MAX OSWR ISWR ILWR RECORD AUX_VOLTAGE LOGGER_VOLTAGE LW_SENSOR_TEMP VENTILATION_FLAG OLWR

en: Meteorological station at Gemstock (3021 m asl) in Canton Uri. The station includes in/out LW/SW and a snow height sensor.

gemstock

display_name: gemstock

longwave-radiation

display_name: longwave-radiation

meteo-station

display_name: meteo-station

shortwave-radiation

display_name: shortwave-radiation

snow-height

display_name: snow-height

en: GEM2: Meteorological and snow station at Gemsstock (3021 m asl), Canton Uri, Switzerland


en: climate-change-impact hydrology water-temperature model discharge

en: Data access

media_type: .zip

en:
This work presents the first extensive study of climate change impacts on rivers temperature in Switzerland. Results show that even for low emissions scenarios, water temperature increase will lead to adverse effect for both ecosystems and socioeconomic sectors (such as nuclear plant cooling) throughout the 21st century. For high emissions scenarios, the effect will be worsen. This study also shows that water warming in summer will be more important in Alpine regions than in lowlands.
This material is distributed under CC BY 4.0 license (https://creativecommons.org/licenses/by/4.0/legalcode).

discharge

display_name: discharge

hydrology

display_name: hydrology

model

display_name: model

water-temperature

display_name: water-temperature

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Dataset for: Future water temperature of rivers in Switzerland under climate change investigated with physics-based models


en: wind-direction raclets wind wind-velocity wind-speed anemometer

en: Sonic wind component w

en:
The data contains values for w direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic time

media_type: npy

en: The data set contains the time in YYYY-mm-dd HH:MM:SS.sss for the anemometer data. The time is given in UTC+1.

en: Sonic wind component u

en:
The data contains values for u direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic temperature

en: The data set contains values of temperature (°C) measured with the anemometer at a sampling frequency of 20 Hz.

en: Sonic wind component v

en:
The data contains values for v direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: A Young 81000 sonic anemomenter was deployed at Gotschnagrat (LON: 46.859 LAT: 9.849) to record three components of the wind velocity (u, v, w in [m s‾ ¹]) and air temperature (Ts in [°C]). The anemomenter was mounted in direction North at a height of 1.5 m above snow surface at the beginning. The time within each data set is given in UTC+1. Instrument specifications can be found [here](http://www.youngusa.com/Manuals/81000-90(I).pdf) .

anemometer

display_name: anemometer

raclets

display_name: raclets

wind

display_name: wind

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

wind-velocity

display_name: wind-velocity

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow Drift Station - 3D Ultrasonic


en: switzerland manure review bioenergy biogas

en: Production de biogaz à partir d’engrais de ferme en Suisse

en: L'objectif de ce livre blanc est de fournir aux décideurs, aux administrations et aux parties prenantes les résultats de recherche les plus récents afin de promouvoir l'utilisation optimale de la bioénergie issue des engrais de ferme dans la transition énergétique suisse. A cette fin, les résultats du centre de compétence suisse pour la recherche en bioénergie - SCCER BIOSWEET - sont résumés et présentés dans un contexte plus large. Si rien d'autre n'est mentionné, les résultats se réfèrent à la Suisse et, dans le cas de la matière première, aux potentiels nationaux de biomasse.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland

education

en: Education and science


en: wetlands landscape amphibians occupancy-models conservation

en: Covariate data 2

en: This file contains covariate data that changes over time for 856 ponds in 21 years (long format): whether or not a pond exists in year _t_, the age of constructed ponds in year _t_, structural connectivity of the pond in year _t_.

en: Model code

media_type: Rmd

en: This R markdown file contains all code and descriptions necessary to load and format the provided data and to fit the dynamic occupancy models described in the associated publication, including JAGS code for the fitted models.

en: Covariate data 1

en: This file contains covariate data that does not change over time for 856 ponds: the region the pond is in, whether the pond is old or new (constructed since 1991), elevation, water surface area, fluctuations of the water table (yes, no), the percent forest cover in 100m radius around the pond, the area or large (>6m wide) roads in 1km radius around the pond.

en: Model code, description

en: This is the output of the R markdown file that provides JAGS model code and describes how to format the provided data and fit the dynamic occupancy models described in the associated publication, for a quick overview.

en: Original raw data

media_type: XLSX

en: This file contains the original raw monitoring data as provided by the canton of Aargau. Access is restricted and only considered upon request and in consultation with the canton of Aargau.

en: Readme

en: Description of methods and datasets.

en: Observation data

en: This file contains detection/non-detection data for the 12 amphibian species between 1999 and 2019 for 3 annual visits. Detectable denotes whether or not a visit j was made to pond i in year t. ObservedID gives a unique ID for the observer collecting the data during visit j to pond i in year t.

en:
In the canton of Aargau, hundreds of new ponds have been constructed since the 1990s to benefit declining amphibian populations. This dataset consists of monitoring data for all 12 pond-breeding amphibian species in the canton of Aargau from 1999 to 2019 in 856 ponds, and environmental variables that describe the ponds and the landscape surrounding the ponds. Species observation data is detection/non-detection data from repeat visits during survey years, during which all potentially suitable ponds in an area were surveyed. Environmental variables describing the ponds are whether the pond has been newly constructed since 1991 or not, pond age (if constructed), elevation a.s.l., the water surface area, and whether the water table fluctuates or not. Environmental variables describing the surroundings of the ponds are the percent area of forest within a circular buffer of radius 100m around the pond, the area of large (width ≥6m) roads within a circular buffer of radius 1km around the pond, and structural connectivity.

The canton of Aargau is the owner of the monitoring data; the original datafile is only disclosed upon request and in consultation with the canton of Aargau.

The edited dataset contains cleaned observation data for the 12 amphibian species, as well as compiled and edited covariate data and code to fit dynamic occupancy models.

amphibians

display_name: amphibians

conservation

display_name: conservation

landscape

display_name: landscape

occupancy-models

display_name: occupancy-models

wetlands

display_name: wetlands

envidat

en: EnviDat: the Environmental Data Portal

en: Amphibian observation and pond data (Aargau, Switzerland)


maintainer: Robert Pazúr

en: grassland habitat remote-sensing vegetation-indices cropland switzerland agriculture sentinel-2 machine-learning phenology

en: GEE (Google Earth Engine) script (JavaScript) to derived the output map  (v1.5)

media_type: JS

en: The code used in Google Earth Engine to derive the cropland, grassland and shrubland map of Switzerland. Compare to the previous version the newer version includes the shadow masking procedure which might be important in the mountainous areas.

en: (current version) Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.6 (v1.5)

media_type: geotiff

en: Assuming that sealed surfaces have little or no phenological response we calculated a mask of unsealed surfaces based on the 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.6.

format: GeoTIFF

en: Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.6  (v1.0)

media_type: TIFF

en:
!!! Please check out the newer version in the repository !!!
Mask of unsealed surfaces of Switzerland based on 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.6

en: Cropland, grassland, and shrubland map of Switzerland (v1.0)

en: !!! Please check out the newer version in this repository !!! (1) cropland; (2) grassland; (3) shrubland; other LC classes are masked out from the map

en: Cropland and grassland map of Switzerland  (v.1.0)

en: !!! Please check out the newer version in this repository !!! (1) cropland; (2) grassland; other LC classes are masked out from the map

en: (current version) Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.7 (v1.5)

en: Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.7 (v1.0)

en: !!! Please check out the newer version in this repository !!! Assuming that sealed surfaces have little or no phenological response we calculated a mask of unsealed surfaces based on the 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.7.

en: GEE (Google Earth Engine) script (JavaScript) to derived the output map  (v1.0)

en: !!! Please check out the newer version in the repository !!! The code used in Google Earth Engine to derive the cropland, grassland and shrubland map of Switzerland

en: (current version) Cropland, grassland, and shrubland map of Switzerland (v.1.5)

en: (current version) Cropland and grassland map of Switzerland (v.1.5)

en: We developed a map of cropland and grassland allocation for Switzerland based on several indices dominantly derived from Sentinel-2 satellite imagery captured over multiple growing seasons. The classification model was trained based on parcel-based data derived from landholder reporting. The mapping was conducted on Google Earth Engine platform using random forest classifier. Areas of high vegetation, shrubland, sealed surface and non-vegetated areas were masked out from the country-wide map. The resulting map has high accuracy in lowlands as well as mountainous areas.

agriculture

display_name: agriculture

cropland

display_name: cropland

grassland

display_name: grassland

habitat

display_name: habitat

machine-learning

display_name: machine-learning

phenology

display_name: phenology

remote-sensing

display_name: remote-sensing

vegetation-indices

display_name: vegetation-indices

education

en: Education and science

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Cropland and grassland map of Switzerland based on Sentinel-2 data


maintainer: Matthias Haeni

en: meteo relative-humidity precipitation par climate-change temperature long-term meteorology swiss-forest-lab wind-speed

en: Site photo of the field station (CIF)

en: Site photo of the field station from the side.

en: Data plot of the field station (CIF)

media_type: text/csv

en: Data file.

en: Forest station data (CIB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Chironico)

en: Site aerial photo from both Chironico stations. Source: Google. 2016. Site aerial photo from both Chironico stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (CIB)

en: Site photo of the forest station (CIB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Chironico in Switzerland where one station is located within a natural coniferous forest stand (CIB) with Norway spruce (_Picea abies_; 160-180 yrs) and European silver fir (_Abies alba_; 140-160 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, CIF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Chironico is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

envidat

en: EnviDat: the Environmental Data Portal

en: Chironico, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 2000 onwards