global-cryosphere-watch-data-survey

maintainer: Mathias Bavay

title_for_slug: global-cryosphere-watch-data-survey

en: automatic-publication gcw data-exchange data-portal data-usage

en: Data interoperability survey

en: Third party data usage

en: Two surveys on the topic of data usage where conducted for the Global Cryosphere Watch data portal. The first one focused on the data provider point of view while the second one focused on the data user point of view. 37 data providers (ie institutions) worldwide provided their answers for the first survey (from fall 2017 until summer 2018) while 54 users (contacted through various mailing list such as the Cryolist) answered the questions on their third party data usage (fall 2019 until January 2020).

automatic-publication

display_name: automatic-publication

data-exchange

display_name: data-exchange

data-portal

display_name: data-portal

data-usage

display_name: data-usage

gcw

display_name: gcw

en: Global Cryosphere Watch data survey


maintainer: Peter Bebi

en: vegetation soil-temperature carbon-dioxide experiment climate-change

state: active

type: dataset

en: FACE experimental design

media_type: PNG

format: PNG

en: FACE DATASETS

media_type: application/zip

format: ZIP

mimetype: application/zip

en: Project description

format: SERVICE

en:
 Overview
High elevation ecosystems are important in research about environmental change because shifts in climate associated with anthropogenic greenhouse gas emissions are predicted to be more pronounced in these areas than in most other regions of the world. This project involves a Free Air CO2 Enrichment (FACE) and soil warming experiment located in a natural treeline environment near Davos, Switzerland (Stillberg, 2200 m a.s.l.). Elevated atmospheric CO2 concentrations (+200 ppm) were applied from 2001 to 2009, and a soil warming treatment (+4 K) was added in 2007 (ongoing). The combined CO2 enrichment and warming treatment reflects conditions expected to occur in this region in approximately 2050. A broad range of ecological and biogeochemical research is carried out as part of this environmental change project.

#Experimental setup
The experiment consists of 40 hexagonal 1.1 m2 plots, 20 with a Pinus mugo ssp. uncinata (mountain pine, evergreen) individual in the centre and 20 with a Larix decidua (European larch, deciduous) individual in the centre. A dense cover of understorey vegetation surrounds the tree in each plot, including the dominant dwarf shrub species Vaccinium myrtillus (bilberry), Vaccinium gaultherioides (group V. uliginosum agg., northern bilberry) and Empetrum nigrum ssp. hermaphroditum (crowberry) plus several herbaceous and non-vascular species.

At the beginning of the experimental period, the 40 plots were assigned to 10 groups of four neighbouring plots (two larch and two pine trees per group) in order to facilitate the logistics of CO2 distribution and regulation. Half of these groups were randomly assigned to an elevated CO2 treatment while the remaining groups served as controls and received no additional CO2. In spring 2007, one plot of each tree species identity was randomly selected from each of the 10 CO2 treatment groups and assigned a soil warming treatment, yielding a balanced design with a replication of five individual plots for each combination of CO2 level, warming treatment and tree species.

#Data
Soil and air conditions have been monitored closely throughout the study period, with most measurements made during the combined CO2 x warming experiment (2007-2009).

carbon-dioxide

display_name: carbon-dioxide

climate-change

display_name: climate-change

experiment

display_name: experiment

soil-temperature

display_name: soil-temperature

vegetation

display_name: vegetation

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: FACE: Stillberg CO2 enrichment and soil warming study


maintainer: Giulia Mazzotti

en: forest-snow snow-energy-balance snow-distribution snow-modelling forest-structure

en: Grid point nomenclature

en: The grid structure of each forest site and the respective nomenclature applied to label individual points within each grid are outlined here.  Each point marks the location of snow depth measurements and co-located canopy structure parameters.

format: XLS

en: Snow depth data open sites

en: Contains all snow detph data accquired at open sites nearby the forest stands during the same period.

en: Coordinates data

en: Includes coordinate information of each surveyed point (7 x 276 = 1932 forest points, 2 open areas)

en: Snow depth data forest sites

en: Contains all snow depth data acquired at all forest sites during winters 2012/13, 2013714 and 2014/15.

en: Meteo data to drive FSM2 model

en: Includes meteorological driving data used to run the forest snow model FSM2, processed and parsed in text files that match the format required by FSM2. Separate files are available for each field area (Laret, Drusatscha and Ischlag) and season (2012/13, 2013/14, 2014/15). Each file includes data for the period from October 1st to May 31st at hourly resolution.

en: Canopy data

en: Includes all canopy structure metrics computed at all surveyed locations

en:
This dataset contains all snow, canopy and meteorological data presented and used in the publication: Mazzotti, G., Essery, R., Moeser, D. & Jonas T. (2020) 'Resolving spatial variability of forest snow using an energy-balance model with a 1-layer canopy'. Water Resources Research, https://doi.org/10.1029/2019WR026129.
This publication must be cited when using this dataset.

forest-snow

display_name: forest-snow

forest-structure

display_name: forest-structure

snow-distribution

display_name: snow-distribution

snow-energy-balance

display_name: snow-energy-balance

snow-modelling

display_name: snow-modelling

en: Snow depth, canopy structure and meterorological datasets from the Davos area, Switzerland, Winters 2012/13-2014/15, used for high-resolution forest snow modelling


maintainer: Christoph Marty

en: Graubunden input

media_type: application/x-tar

en: Grid input data for the 'Graubunden' CH2014 simulation.

mimetype: application/x-tar

en: CH2014 REPORT

en:
CH2014-Impacts: Toward Quantitative Scenarios of Climate Change Impacts in Switzerland

The CH2014-Impacts report presents the results of a concerted effort of 15 Swiss research institutions to describe impacts of climate change in Switzerland quantitatively. This dataset contributes to the Crosphere/Snowcover section.

en: Aare input

en: Grid input data for the 'Aare' CH2014 simulation.

en: Dataset

en: Datasets are grouped under experiment "Aare" and "Graubunden".Data is also made available in netCDF format. A range of tools are available to [read netCDF](http://www.unidata.ucar.edu/software/netcdf/software.html).

en:
 Overview

The CH2014-Impacts initiative is a concerted national effort to describe impacts of climate change in Switzerland quantitatively, drawing on the scientific resources available in Switzerland today. The initiative links the recently developed Swiss Climate Change Scenarios CH2011 with an evolving base of quantitative impact models. The use of a common climate data set across disciplines and research groups sets a high standard of consistency and comparability of results. Impact studies explore the wide range of climatic changes in temperature and precipitation projected in CH2011 for the 21st century, which vary with the assumed global level of greenhouse gases, the time horizon, the underlying climate model, and the geographical region within Switzerland. The differences among climate projections are considered using three greenhouse gas scenarios, three future time periods in the 21st century, and three climate uncertainty levels (Figure 1). Impacts are shown with respect to the reference period 1980-2009 of CH2011, and add to any impacts that have already emerged as a result of earlier climate change.

 Experimental Setup

Future snow cover changes are simulated with the physics-based model Alpine3D (Lehning et al., 2006). It is applied to two regions: The canton of Graubünden and the Aare catchment. These domains are modeled with a Digital Elevation Model (DEM) with a resolution of 200 m × 200 m. This defines the simulation grid that has to be filled with land cover data and downscaled meteorological input data for each cell for the time period of interest at hourly resolution. The reference data set consists of automatic weather station data. All meteorological input parameters are spatially interpolated to the simulation grid. The reference period comprises only thirteen years (1999–2012), because the number of available high elevation weather stations for earlier times is not sufficient to achieve unbiased distribution of the observations with elevation. The model uses projected temperature and precipitation changes for all greenhouse gas scenarios (A1B, A2, and RCP3PD) and CH2011 time periods (2035, 2060, and 2085).

 Data

Snow cover changes are projected to be relatively small in the near term (2035) (Figure 5.1 top), in particular at higher elevations above 2000 m asl. As shown by Bavay et al. (2013) the spread in projected snow cover for this period is greater between different climate model chains (Chapter 3) than between the reference period and the model chain exhibiting the most moderate change. In the 2085 period much larger changes with the potential to fundamentally transform the snow dominated alpine area become apparent (Figure 5.1 bottom). These changes include a shortening of the snow season by 5–9 weeks for the A1B scenario. This is roughly equivalent to an elevation shift of 400–800 m. The slight increase of winter precipitation and therefore snow fall projected in the CH2011 scenarios (with high associated uncertainty) can no longer compensate for the effect of increasing winter temperatures even at high elevations. In terms of Snow Water Equivalents (SWE), the projected reduction is up to two thirds toward the end of the century (2085). A continuous snow cover will be restricted to a shorter time period and/or to regions at increasingly high elevation. In Bern, for example, the number of days per year with at least 5 cm snow depth will decrease by 90% from now 20 days to only 2 days on average.

snow-depth

display_name: snow-depth

snow-water-equivalent

display_name: snow-water-equivalent

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Alpine3D simulations of future climate scenarios CH2014


dischmex-meteorological-measurements

maintainer: Rebecca Mott

title_for_slug: dischmex-meteorological-measurements

en: meteorological-data dischmex meteorological-measurements dischma meteo-station

en: Meteorological measurements 2016

media_type: application/pdf

en: Location of the meteorological stations

format: PDF

mimetype: application/pdf

en: Meteorological measurement 2014

en: data

en: Meteorological measurement 2015

en: Overview sensors

en: Meteorological measurements 2014

en:
Meteorological measurements recorded in the Dischma valley from 2014-2016. In 2014 and 2015 we used 11 mobile weather stations from sensorscope to record meteorological parameter in the upper Dischma valley in the closer surroundings of the Gletschboden area. The meteorological stations are eqiupped with at least air temperature/humidity, wind velocity and wind direction sensors. Some stations are additionally equipped with precipitation, shortwave radiation and snow surface temperature sensors.
Three transects were installed at different aspects and were equipped with air temperature/humidity and wind sensors. Transect 1 (stations 2-4) provides meteorological Information on an east-north-east facing slope at elevations ranging between 2100 m and 2500 m. Transect 2 (stations 5-7) provides meteorological Information on a south-west slope and transect 3 (stations 8-10) on a north-west slope. Station 1 is fully equipped with meteorological sensors (temperature/humidity, wind, IR, up and downwand shortwave radiation and precipitation).
In 2016, mobile stations from sensorscope were replaced with six permanent meteorological stations. Meteorological stations 1-3 are equipped with an air temperature/humidity sensor, two wind speed sensors, a wind direction sensor and an incoming and outgoing shortwave radiation sensor. Stations 4 and 6 are equipped with an air temperature/humidity sensor and a wind speed/direction sensor. Station 5 is a equipped with an air temperature/humidity sensor, a wind speed/direction sensor, a snow surface temperature sensor, an incoming and outgoing shortwave radiation sensor and an incoming longwave radiation sensor.

dischma

display_name: dischma

dischmex

display_name: dischmex

meteo-station

display_name: meteo-station

meteorological-data

display_name: meteorological-data

meteorological-measurements

display_name: meteorological-measurements

en: DISCHMEX - Meteorological measurements


en: snowpack-simulation rutschblock snowpack failure-layer snow-instability snow-profiles snow-stratigraphy

en: Observed snow profiles

media_type: .csv

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en: ReadMe

en: ReadMe file explaining data structure and content

en: Simulated snow profiles

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en: DAV data set: Properties of observed snow profiles and simulated failure layers

media_type: CSV

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

format: CSV

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-instability

display_name: snow-instability

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack

display_name: snowpack

snowpack-simulation

display_name: snowpack-simulation

en: Observed and simulated snow profile data


maintainer: EnviDat Support

en: nitrogen forest face soil picea-abies co2

en: Gross N mineralisation and nitrification

media_type: text/csv

en: Gross rates of N mineralisation and nitrification (15N dilution)

mimetype: text/csv

en: Resin bags

en: Ammonium, nitrate and their 15N in resin bags

en: Water analyses

en: Analyses of water, especially soil solution

en: Collection points

en: Collection points under the trees

en: Collection of soil solution

en: Soil solution collected by suction cups

en: Soil C and N

en: Analyses of C, N and their stable isotopes in the soil, and soil pH

en: Data obtained in the free-air CO2 enrichment (FACE) experiment at Hofstetten, NW Switzerland, between 2009 and 2016. This dataset contains analyses of the soil solution throughout the experiment, especially for nitrate, as well as different analyses done at the end of the experiment: ammonium and nitrate captured by ion-exchange resin bags and extracted from soil cores, gross N mineralisation and nitrification measured by isotope dilution.

face

display_name: face

forest

display_name: forest

nitrogen

display_name: nitrogen

picea-abies

display_name: picea-abies

soil

display_name: soil

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Nitrogen availability under trees exposed to CO2 enrichment (FACE)


maintainer: Yves Bühler

en: ramms snow hazard-indication-mapping avalanche release hazard-mapping

en: RAMMS simulations NHESS

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

en: Potential Release  Area  NHESS

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

hazard-mapping

display_name: hazard-mapping

ramms

display_name: ramms

release

display_name: release

snow

display_name: snow

en: Automated Avalanche Release Area (PRA) Delineation Davos


en: antarctica snowmicropen snow-density snow-density-profile microstructure

en: Manual snow pits and other snow density measurements

media_type: .txt

en: Documentation SnowMicroPen measurements

media_type: .zip

en: This *.zip archive contains all available documentation of the SnowMicroPen measurements, including the mapping of the SMP measurements in the terrestrial laser scan field at PEA (see documentation for 20161220) and at the Hammarryggen Ice Rise (see documentation for 20190104 and 20190111).

en: Python code exported from the Jupyter notebook for processing the SnowMicroPen files

media_type: py

en: SnowMicroPen pts files and processed txt files

en: Zip archive containing the acquired *.pts files (binary files recorded by the SnowMicroPen), and the converted *.txt files using the SMP.ipynb jupyter notebook (see the python code in the other resources in this dataset)

media_type: ipynb

en: Jupyter notebook for processing the SnowMicroPen files.

en: List of SnowMicroPen measurements

en: List of all SnowMicroPen measurements, including date and location, and processing status. This list has been generated by the python code (see other resources in this dataset).

en: SnowMicroPen (SMP) measurements and manual snowpits from Dronning Maud Land, East Antarctica. Measurements were taken in the vicinity of the Belgium Princess Elisabeth Station (PEA), in a transect towards the coast, and on the Lokeryggen and Hammarryggen Ice Rises near the coast. Measurements were taken during 3 individual campaigns in the 2016-2017, 2018-2019 and 2019-2020 field seasons.

antarctica

display_name: antarctica

microstructure

display_name: microstructure

snow-density

display_name: snow-density

snow-density-profile

display_name: snow-density-profile

snowmicropen

display_name: snowmicropen

en: SnowMicroPen measurements and manual snowpits from Dronning Maud Land, East Antarctica


en: functional-diversity soil phylogenetic-diversity climate taxonomic-diversity ecological-indicator-values grain-size

en: Data access

media_type: ZIP

en:
This dataset comprises a large array of ecological data for the European Alps:

  (1) Current soil and climate predictors at various resolutions.
  (2) GBIF observations of the European Alps Flora (~4,000 species).
  (3) Species habitat suitability maps (1,109 species; based on species observations filtered at 40x40-km)
  at various resolutions used in the study to generate (4); except 'expert'...
  (4) Expert, Taxonomic, phylogenetic and functional diversity of the study region at various resolutions
  (from 100-m to 40-km --> 100-m aggregated & mean to km + non-aggregated/predicted) for CLIM,
  SOIL and CLIM-SOIL models.
  (5) Ecological and altitudinal preferences of the European Alps Flora.
  (6) Data outputs of the related published article.
  (7) All scripts used for analyses.
  (8) Additional files used for analyses.
  (9) Improved set of species habitat suitability maps (~2,600 species; based on species observations
  filtered at 1x1-km) and related taxonomic diversity at 100-m resolution (aggregated to km +
  non-aggregated/predicted) for CLIM, SOIL and CLIM-SOIL models ---> not incorporated in the study.

climate

display_name: climate

ecological-indicator-values

display_name: ecological-indicator-values

functional-diversity

display_name: functional-diversity

grain-size

display_name: grain-size

phylogenetic-diversity

display_name: phylogenetic-diversity

taxonomic-diversity

display_name: taxonomic-diversity

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Resolution in species distribution models shapes spatial patterns of plant multifaceted diversity


maintainer: Giulia Francesca Azzurra Donati

en: biodiversity integrated-modelling human-dominated-landscapes ecological-corridors urban-spatial-planning circuit-theory

en: Amphibian monitoring data

en: Processed amphibian occurrence data (2017-2019) in the cantons of Aargau and Zürich. The dataset includes information for the following species: _Alytes obstetricans_,_Bombina variegata_, _Bufo bufo_, _Hyla arborea_, _Ichtyosaura alpestris_, _Lissotriton helveticus_, _Lissotriton vulgaris_, _Rana temporaria_, _Salamandra salamandra_, and _Triturus cristatus_.

en: Amphibian whole life cycle predictors - 10m resolution

media_type: zip-compressed folder of ascii files

en:
Amphibian whole life cycle predictors include 6 variable types:
(1)	Topographic – slope [°]: derived from the Swiss Topographical Landscape model (swissTLM 3D 2015) at 2 m resolution (elevation uncertainty ± 0.5m) and, subsequently, aggregated to a median value;
(2)	Hydrologic: two predictors including nearest distance to water [m] (all water-related objects and rasterized lotic, lentic and reedbeds from the regional cadastral maps – AV: Daten der Amtliche Vermessung) and runoff coefficient [C] (between 0 and 1 relating amount of runoff to amount of precipitation, mapped AV: Daten der Amtliche Vermessung data against literature values for different land covers);
(3)	Edaphic – soil moisture variability (not available): can gathered from the spatial modelling of Ecological Indicator Values in Switzerland (Descombes et al., 2020) and resampled from 100m to 10m;
(4)	Vegetation: we calculated the median and standard deviation of the Normalized Difference Vegetation Index (NDVI) from all available cloud free Sentinel-2 pixels available between April and October for the years 2016 to 2019 (Drusch et al., 2012) and the median vegetation height [m] (not available) can gathered from Ginzler and Hobi (2015);
(5)	Land-use derived: includes three predictors, grassland density [grassland/cell] (not available) - can be gathered from Pazur et al. (2021), total grasslands area evaluated using a spatial weight matrix and a 250m neighborhood radius around each cell; urbanization [buildings/cell] – average building density for a 250m neighborhood around each cell based on the AV: Daten der Amtliche Vermessung ; and traffic intensity [vehicles/day] – average daily vehicle count (Nationales Personenverkehrsmodells);
(6)	Movement-ecology related: includes three predictors of proximity – nearest forest distance [m]; nearest rock-gravel and sandy area (RGS) distance [m] and nearest road distance [m] (considering any road type) – all calculated based on the AV: Daten der Amtliche Vermessung maps.

en: Amphibian species specific landscape resistance maps.

en: For each amphibian species we used the weighted average Ensemble model suitability map and converted it to a resistance map using an exponential decay function following (Duflot et al., 2018) using the species-specific mpa threshold previously computed (Preau et al., 2020). The function assigns a resistance value of 1,000 when habitat suitability equals zero, and a value of one when habitat suitability is greater than or equal to the binarization threshold. The exponential shape strengthens the barrier effect of less favorable areas.

en: Amphibian breeding sites of national importance - cantons of Aargau and Zürich

media_type: .asc

en: Amphibian breeding sites of national importance (focal nodes) in the cantons of Aargau and Zürich, 30x30 m resolution, binarised ascii format.

en: Binarized "green" and "grey" landcover data (Cantons of Aargau and Zürich)

en: "Green" landcover refers to lawns and vegetated urban surfaces such as, for example private gardens, public parks, cemeteries, green stripes along roadsides, etc. While "grey" landcover refers to impervious grounds such as roads, troittoirs, other impervious. Binarized maps, 30x30m resolution.

en: The data includes (1) amphibian occurrence data (2017-2019) for ten species across the cantons of Aargau and Zürich gathered from the Coordination Center for the Protection of Amphibians and Reptiles of Switzerland (http://www.karch.ch), (2) amphibian whole-life cycle environmental predictors (i.e. topographic, hydrologic, edaphic, vegetation, land-use derived, movement-ecology related), and (3) local urban "green" and "grey" landcover data which can be used to identify opportunities for Blue-Green Infrastructure (through green or grey transitions) in support of regional landscape connectivity.

biodiversity

display_name: biodiversity

circuit-theory

display_name: circuit-theory

ecological-corridors

display_name: ecological-corridors

human-dominated-landscapes

display_name: human-dominated-landscapes

integrated-modelling

display_name: integrated-modelling

urban-spatial-planning

display_name: urban-spatial-planning

en: Amphibian and urban-rural landscape data Swiss Lowlands


maintainer: Dirk Nikolaus Karger

en: climate-change free-climate-data bioclim climatology climate temperature precipitation climate-layers

en: CHELSA V2.1 (current)

media_type: geotiff

en: CHELSA Version 2.1 based on ERA5 forcings and CMIP6

format: GeoTIFF

en: CHELSA V1.2 (deprecated)

en: CHELSA Version 1.2 based on ERA-Interim forcings and CMIP5

en: CHELSA Technical Documentation

media_type: PDF

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present the CHELSA (Climatologies at high resolution for the earth’s land surface areas) data of downscaled temperature and precipitation to a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperatures. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height, with a subsequent bias correction.

CHELSA data published in EnviDat includes the deprecated version 1.2 (originally published under 10.5061/dryad.kd1d4). Please use the current 2.1 version.

Paper Citation:
 > _Karger DN. et al. Climatologies at high resolution for the earth’s land surface areas, Scientific Data, 4, 170122 (2017) [doi: 10.1038/sdata.2017.122](https://doi.org/10.1038/sdata.2017.122)._

bioclim

display_name: bioclim

climate-change

display_name: climate-change

climate-layers

display_name: climate-layers

climatology

display_name: climatology

free-climate-data

display_name: free-climate-data

precipitation

display_name: precipitation

temperature

display_name: temperature

education

en: Education and science


maintainer: Loïc Pellissier Pellissier

en: elevation plant-herbivore-interactions environmental-gradients alps community-indices herbivores-communities functional-traits

en: Orthoptera traits

media_type: text/plain

en: Orthoptera functional traits (incisive mandibular strength averaged by species)

format: TXT

mimetype: text/plain

en: Vegetion surveys

en: Species inventories of plants

en: Study sites

en: Coordinates and elevation of the study sites

en: Orthoptera surveys

en: Species inventories of Orthoptera

en: Plant traits

en: Plant functional traits (SLA, LDMC, carbon and nitrogen content, punch strenght; averaged by species)

en: Nematode surveys

en: Surveys of soil nematode along elevation

en: Despite the common role of above- and below-ground herbivore communities in mediating ecosystem functioning, our understanding of the variation of species communities along natural gradient is largely strongly biased toward aboveground organisms. This dataset enables to study the variations in assemblages of two dominant groups of herbivores, namely, aboveground orthoptera and belowground nematodes together with their food plants. Herbivores and plant surveys were conducted in 48 natural grasslands along six elevation gradients, selected to span the major macro-climatic and environmental conditions of the Swiss Alps. It compiles herbivores and plant surveys, information on the study sites as well as plant and herbivores functional traits sought to be involved in trophic interactions and to respond to climatic variation along the elevation. Plant functional traits considered are the SLA, the LDMC, the C/N content, the punch strength (i.e. force required to pierce the leave lamina), the mandibular strength for Orthoptera insect. Data were collected during the summer 2016 and 2017.

alps

display_name: alps

community-indices

display_name: community-indices

elevation

display_name: elevation

environmental-gradients

display_name: environmental-gradients

functional-traits

display_name: functional-traits

herbivores-communities

display_name: herbivores-communities

plant-herbivore-interactions

display_name: plant-herbivore-interactions

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Above- and below-ground herbivore communities along elevation


maintainer: Jonas Stillhard

en: long-term-data-sets fagus-sylvatica permanent-forest-plot-data carpathian-biosphere-reserve primeval-beech-forest forest stand-inventory-data forest-structure dem forest-dynamics

en: Data description

en: Available online on publishers website

en: Dataset

en:
In 2000, a permanent forest plot of 10 ha has been established in the core zone of the primeval beech forest of Uholka.
 All living and dead trees with a diameter at breast height (DBH) ≥ 60 mm were identified to species, DBH measured, stems tagged and mapped.
Since then, the plot has been remeasured in 2005, 2010, and 2015. In total, 4,820 individual trees were measured with 14,116 individual measurements throughout all four inventories.
In spring 2018, an Airborne Laser Scan was carried out, covering the Uholka‐Shyrokyi Luh forest. This data set allows us to derive a high‐resolution digital elevation model (DEM) of the plot area.
The data set allows for important insights into the development and the spatial and temporal dynamics of primeval beech forests.

carpathian-biosphere-reserve

display_name: carpathian-biosphere-reserve

dem

display_name: dem

fagus-sylvatica

display_name: fagus-sylvatica

forest

display_name: forest

forest-dynamics

display_name: forest-dynamics

forest-structure

display_name: forest-structure

long-term-data-sets

display_name: long-term-data-sets

permanent-forest-plot-data

display_name: permanent-forest-plot-data

primeval-beech-forest

display_name: primeval-beech-forest

stand-inventory-data

display_name: stand-inventory-data

education

en: Education and science

en: Stand inventory data from the 10‐ha forest research plot in Uholka, Ukraine


en: raclets backward-trajectories clouds ice-nucleation aerosol

en: This dataset contains number concentrations of ice-nucleating particles active at -15 °C observed at Weissfluhjoch during February and March 2019, as well as complementary data (measured aerosol number concentrations and modelled total precipitation along air mass trajectories). This data formed the basis of our paper with the title “Towards parameterising atmospheric concentrations of ice-nucleating particles active at moderate supercooling”.

aerosol

display_name: aerosol

backward-trajectories

display_name: backward-trajectories

clouds

display_name: clouds

ice-nucleation

display_name: ice-nucleation

raclets

display_name: raclets

en: Ice nucleating particle concentrations active at -15 °C at Weissfluhjoch


maintainer: Alexandre Buttler

en: transplantation-experiment silvopastoral-systems biogeochemisty climate-change soil

en: Zip archive of all datasets detailed in study.

en:
Silvopastoral systems are highly productive and combine long-term wood production with annual provision of forage for livestock. In the Swiss Jura Mountains these systems are a key component of the landscape. As in other cold biomes, climate change can potentially accelerate landscape change within these historically sustainable systems.

In order to anticipate the evolution of subalpine wooded pasture ecosystems under future climate and land-use changes, this project focused on the interplay between soil, vegetation and climate. It was aimed at providing experimental evidence for chief ecosystem processes, with emphasis on the quality of the ecosystem services provided. The main interest was placed on vegetation turf resistance to climate change along an unwooded – sparsely wooded - densely wooded pasture gradient (land-use intensity), where plant productivity, diversity and succession along with rates of carbon cycling and microbial activity provided measures of ecosystem functioning at both plot and landscape level.

Experimental transplantation of monolith soil turfs to lower altitudes allowed to simulate soil warming and reduced annual precipitation. In order to simulate a year-round warmer and drier climate the natural climate variation along an altitudinal gradient was used as a proxy. The aim was to simulate realistic climate change scenarios for the second half of the 21st century predicted by the IPCC report and downscaled for Switzerland providing regionalized interpolated projections integrating therein trends for temperature increase and precipitation decrease. By using permanent meteorological stations within the network of the Federal Office of Meteorology and Climatology (MeteoSwiss), we obtained high resolution regional data on the variation of mean annual temperature (MAT) and mean annual precipitation (MAP) in relation to altitude in the Swiss Jura Mountains. We observed a general increase of +0.5 K in MAT and a decrease of -20 % MAP for each 100 m decrease in altitude along the SE slope of the Swiss Jura Mountains. These relationships served for the selection of the transplantation sites such that in comparison to a control site at 1350 m a.s.l. (Combe des Amburnex, N 46°54’, E 6°23’) a +2 K MAT and -20 % MAP was achieved at 1010 m a.s.l. (Saint-George, N 46°52’, E 6°26’), a +4 K MAT and -40 % MAP at 570 m a.s.l., (Arboretum d’Aubonne, N 46°51’, E 6°37’), and a +5 K MAT and -50 % MAP at 395 m a.s.l. (Les Bois Chamblard, N 46°47’, E 6°41’). The two stations at 1010 m a.s.l. and 570 m a.s.l. corresponded to the IPCC scenario A1B for a moderate increase in greenhouse gas emissions and to scenario A2 for a high increase in greenhouse gas emissions, respectively. The station at 395 m a.s.l. was chosen to represent an extreme scenario with climate variables lying at the positive tail distribution of model predictions under the A2 scenario.

Soil cores were assembled into rectangular PVC boxes of 60  80 cm2 size and of 35 cm height. All mesocosms were dug down to surface level into previously prepared trenches in the ground thus preventing lateral heat exchange with the atmosphere. Since at each site the mesocosms were placed in a common garden with no light interception, mesocosms with turfs from the two wooded pastures were shaded from direct sun light to simulate the natural light conditions in the corresponding habitats. Each mesocosm was equipped with a drainage system and was connected to a water tank thus representing a zero potential lysimeter collecting soil solution and precipitation/snowmelt runoff. ECH2O EC-TM sensor probes coupled to Em50 data-loggers (Decagon Devices, Inc., USA) recorded soil temperature and volumetric water content in each mesocosm at the top-soil (0 to -3 cm) every minute and data were averaged over one hour intervals. Climate parameters at each transplantation site were monitored continuously throughout the experiment by means of automated weather stations (Sensor Scope Sàrl, Switzerland), measuring rain precipitation (non-heated tipping bucket gauges) and air temperature and humidity 2 m above the ground surface at one minute intervals.

A list of above- and belowground variables were measured to assess the resilience of biogeochemical processes, plant productivity, tree regeneration, and carbon sequestration for each respective land-use practice. Furthermore, the experimental data were used to improve on (parameterization) the existing spatially explicit, dynamic model WoodPaM and refine the modelʼs climatic and land-use variables so that different scenarios of climate change and land use change could be simulated. Natural and management induced disturbance patterns were incorporated into the model.
The data have been made available within the project CCES Mounted. The climate stations Sensorscope are still in use within the project CLIMARBRE (Wald und Klimawandel, WSL/BAFU).

#References

1. Puissant, J., Cécillon, L., Mills, R.T.E., Robroek, B.J.M. Gavazov, K., De Danieli, S., Spiegelberger, T., Buttler, A., Brun, J.J. 2015. Seasonal influence of climate manipulation on microbial community structure and function in mountain soils. Soil Biology and Biochemistry 80: 296–305.
2. Mills, R., K. Gavazov, T. Spiegelberger, D. Johnson and A. Buttler 2014. Diminished soil functions occur under simulated climate change in a sup-alpine pasture, but heterotrophic temperature sensitivity indicates microbial resilience. Science of the Total Environment, vol. 473–474(0): 465-472.
3. Gavazov, K., Spiegelberger, T. and Buttler, A. 2014. Transplantation of subalpine wood-pasture turfs along a natural climatic gradient reveals lower resistance of unwooded pastures to climate change compared to wooded ones. Oecologia (174) : 1425-1435.
4. Peringer A., Siehoff S., Chételat J., Spiegelberger T., Buttler A. & Gillet F. 2013. Past and future landscape dynamics in pasture-woodlands of the Swiss Jura Mountains under climate change. Ecology and Society, 18, 3: 11. DOI: 10.5751/ES-05600-180311. [online] URL: http://www.ecologyandsociety.org/vol18/iss3/art11/
5. Gavazov, K. S., A. Peringer, A. Buttler, F. Gillet and T. Spiegelberger. 2013. Dynamics of Forage Production in Pasture-woodlands of the Swiss Jura Mountains under Projected Climate Change Scenarios. Ecology and Society 18 (1): 38. [online] URL: http://www.ecologyandsociety.org/vol18/iss1/art38/

biogeochemisty

display_name: biogeochemisty

climate-change

display_name: climate-change

silvopastoral-systems

display_name: silvopastoral-systems

soil

display_name: soil

transplantation-experiment

display_name: transplantation-experiment

en: Biogeochemical data from a transplantation experiment of monolith soil turfs along an altitudinal gradient to simulate climate change scenarios


en: mountain irradiance photovoltaic albedo snow reflection energy

en: PV Data

en: Windows users use the 7-zip app to extract the zip-file.

en:
 Overview
The SUNWELL Modelling Environment is a combination of data and code that models electricity production from satellite-derived irradiance data and other spatial data sets for all of Switzerland. This ensemble accompanies the publication "The bright side of PV production in snow-covered mountains", published in the Proceedings of the National Academy of Science and reproduces all results and figures of. Code and resources are in their original form (with documentation). A new version with a more generalized application to PV modelling and with more flexibility in terms of input and output formats will be released in the coming months.

 Format
All code is written and has to be executed in Matlab. The input and output data sets are also in the Matlab-specific .mat format. Whenever publicly available, the original data is provided as geotif, .xlsx or other common format.
This is the case for:

- Digital Elevation Model (InputsFromMatlab/MSG/OriginalData/ASTERDEM),
- Landsurface cover type (InputsFromMatlab/MSG/OriginalData/CORINE),
- Population Density (InputsFromMatlab/MSG/OriginalData/popdensRaster,
- Electricity production from three of our validation sites (/Validation/WSL),
- Measured irradiance for two validation sites (/Validation/ASRB)
The ‘Metadata’ documents in the respective folders provide further information about the data sources and processing. Figures are produced either in .pdf or .png format.

 Structure
The central level of the SUNWELL environment holds the 5 Mains, which run the different modelling aspects of the paper; each code is documented separately. Additional code is located in the ‘DataProcessing’ and the ‘functions’ folder. Functions are called in the different Mains.

‘InputsFromMatlab’ contains the radiation and albedo input data sets in separate subfolders (SIS/SISDIR/ALB). The original data is not publicly available, but can be requested for research purposes free of charge. We provide a processed subset of the data set that was used to run the SUNWELL simulations. The MSG subfolder contains additional spatial input data sets.

‘Outputs’ contains the output files from the different mains (matching names, Main_CHallpixels.m  Prod_CHallpixels)

‘Publication_figures’ contains all individual figures from the PNAS publication, as well as the generating code (/code_plot) and the power point figures (/ppts) that provide the combined final figures.

‘Validation’ contains the data sets used in the model validation:

- Electricity production from three of our validation sites (/WSL),
- Measured irradiance for two validation sites (/ASRB)

Electricity production from a validation site at Lac des Toules in Wallis (/LDT), this data set was provided under an NDA and cannot be made publicly available.

Paper Citation:
 > _Annelen Kahl; Jérôme Dujardin; Michael Lehning (2018). Dataset on PV Production in Snow Covered Mountains. PNAS - Proceedings of the National Academy of Sciences. (in press)_

albedo

display_name: albedo

energy

display_name: energy

irradiance

display_name: irradiance

mountain

display_name: mountain

photovoltaic

display_name: photovoltaic

reflection

display_name: reflection

snow

display_name: snow

envidat

en: EnviDat: the Environmental Data Portal


en: hazard-mapping avalanche satellite snow natural-hazard

en: SPOT6 Avalanche outlines 24 January 2018

media_type: SHP

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset.

format: SHP

en:
Outlines of 18'737 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 24 January 2018. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

Abstract.
Accurate and timely information on avalanche occurrence are key for avalanche warning, crisis management and avalanche documentation. Today such information is mainly available at isolated locations provided by observers in the field. The achieved reliability considering accuracy, completeness and reliability of the reported avalanche events is limited. In this study we present the spatial continuous mapping of a large avalanche period in January 2018 covering the majority of the Swiss Alps (12’500 km2).

We tested different satellite sensors available for rapid mapping during a first avalanche period. Based on these experiences, we tasked SPOT6/7 data for data acquisition to cover the second, much larger avalanche period. We manually mapped the outlines of 18’737 individual avalanche events, applying image enhancement techniques to analyze regions in cast shadow as well as brightly illuminated ones. The resulting dataset of mapped avalanche outlines, having a unique completeness and reliability, is evaluated to produce maps of avalanche occurrence and avalanche size. We validated the mapping of the avalanche outlines using photographs acquired from helicopters just after the avalanche period.

This study demonstrates the applicability of optical, very high spatial resolution satellite data to map an exceptional avalanche period with very high completeness, accuracy and reliability over a large region. The generated avalanche data is of great value to validate avalanche bulletins, complete existing avalanche databases and for research applications by enabling meaningful statistics on important avalanche parameters.

Koordinate System: CH1903+ LV95 LN02

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: wetlands landscape amphibians conservation occupancy-models

en: Model code

media_type: Rmd

en: This R markdown file contains all code and descriptions necessary to load and format the provided data and to fit the dynamic occupancy models described in the associated publication, including JAGS code for the fitted models.

en: Covariate data 1

en: This file contains covariate data that does not change over time for 856 ponds: the region the pond is in, whether the pond is old or new (constructed since 1991), elevation, water surface area, fluctuations of the water table (yes, no), the percent forest cover in 100m radius around the pond, the area or large (>6m wide) roads in 1km radius around the pond.

en: Observation data

en: This file contains detection/non-detection data for the 12 amphibian species between 1999 and 2019 for 3 annual visits. Detectable denotes whether or not a visit j was made to pond i in year t. ObservedID gives a unique ID for the observer collecting the data during visit j to pond i in year t.

en: Model code, description

media_type: HTML

en: This is the output of the R markdown file that provides JAGS model code and describes how to format the provided data and fit the dynamic occupancy models described in the associated publication, for a quick overview.

format: HTML

en: Original raw data

media_type: XLSX

en: This file contains the original raw monitoring data as provided by the canton of Aargau. Access is restricted and only considered upon request and in consultation with the canton of Aargau.

en: Covariate data 2

en: This file contains covariate data that changes over time for 856 ponds in 21 years (long format): whether or not a pond exists in year _t_, the age of constructed ponds in year _t_, structural connectivity of the pond in year _t_.

en: Readme

en: Description of methods and datasets.

en:
In the canton of Aargau, hundreds of new ponds have been constructed since the 1990s to benefit declining amphibian populations. This dataset consists of monitoring data for all 12 pond-breeding amphibian species in the canton of Aargau from 1999 to 2019 in 856 ponds, and environmental variables that describe the ponds and the landscape surrounding the ponds. Species observation data is detection/non-detection data from repeat visits during survey years, during which all potentially suitable ponds in an area were surveyed. Environmental variables describing the ponds are whether the pond has been newly constructed since 1991 or not, pond age (if constructed), elevation a.s.l., the water surface area, and whether the water table fluctuates or not. Environmental variables describing the surroundings of the ponds are the percent area of forest within a circular buffer of radius 100m around the pond, the area of large (width ≥6m) roads within a circular buffer of radius 1km around the pond, and structural connectivity.

The canton of Aargau is the owner of the monitoring data; the original datafile is only disclosed upon request and in consultation with the canton of Aargau.

The edited dataset contains cleaned observation data for the 12 amphibian species, as well as compiled and edited covariate data and code to fit dynamic occupancy models.

amphibians

display_name: amphibians

conservation

display_name: conservation

landscape

display_name: landscape

occupancy-models

display_name: occupancy-models

wetlands

display_name: wetlands

education

en: Education and science

en: Amphibian observation and pond data (Aargau, Switzerland)


en: species-observations synonyms occurrence-records landsca accepted-name range-maps gbif species-distribution filtering taxonomy ecoregions flags hard-limit conservation large-scale r-package

en: GitHub URL

media_type: R

en: wsl.gbif R package version 0.1 (deprecated)

en: Test version, not to be used.

en: gbif.range R package version 0.2 (current)

en: Although species range may be obtained using expert maps or modeling methods, expert data is often species-limited and statistical models need more technical expertise as well as many species observations. When unavailable, such information may be extracted from the Global Biodiversity Information facility (GBIF), the largest public data repository inventorying georeferenced species observations worldwide. However, retrieving GBIF records at large scale may be tedious if users are unaware of specific tools and functions that need to be employed. Here we present *gbif.range*, a R library that contains automated methods to generate species range maps from scratch using in-house ecoregions shapefiles and an easy-to-use GBIF download wrapper. Finally, this library also offers a set of additional very useful parameters and functions for large GBIF datasets (generate doi, extract GBIF taxonomy, records filtering...). [gbif.range R project](https://github.com/8Ginette8/gbif.range)

accepted-name

display_name: accepted-name

ecoregions

display_name: ecoregions

filtering

display_name: filtering

flags

display_name: flags

gbif

display_name: gbif

hard-limit

display_name: hard-limit

landsca

display_name: landsca

large-scale

display_name: large-scale

occurrence-records

display_name: occurrence-records

r-package

display_name: r-package

range-maps

display_name: range-maps

species-distribution

display_name: species-distribution

species-observations

display_name: species-observations

synonyms

display_name: synonyms

taxonomy

display_name: taxonomy

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: gbif.range - An R package to generate species range maps based on ecoregions and a user-friendly GBIF wrapper


maintainer: Zhao

en: planning driving-factors urban-land-use land-dynamics austin

en: Potential driving factors of urban transformations of Austin over 25 years

en: In this study, the Austin metropolitan area, Texas, U.S., one of the fastest urban transformations and transformations regions, is selected to test the hypothesis that spatial planning and policies are important factors of urban transformations. Despite ample previous work in understanding the interactions between human and urban form transformation at specific areas, the actual interventions and outcomes of planning and policies (e.g., ‘smart growth’) on urban forms have been poorly measured. In this study, the potential influencing factors of urban transformations of Austin over 25 years were selected and collected.

austin

display_name: austin

driving-factors

display_name: driving-factors

land-dynamics

display_name: land-dynamics

planning

display_name: planning

urban-land-use

display_name: urban-land-use


maintainer: Lisa Hülsmann

en: empirical-mortality-models inventory-data forest-reserves tree-growth tree-mortality

en: Calibration data

en:
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.

 Meta data
Reserve: Name of the forest reserve

Plot: Permanent plot number

 Tree data
Species: Latin species name (or species group, cf. _Quercus_ spp.)

y: Status of the tree with 0 = alive and 1 = dead

dt: Length of the mortality period (years)

DBH: Diameter at breast height (mm) of the second inventory

relBAI: Annual relative basal area increment (-) calculated based on the first and the second DBH measurement as the compound annual growth rate of the trees basal area

 Stand data
_All stand variables were calculated for the second inventory._

mDBH: Mean diameter at breast height (mm)

iqrDBH: Interquartile range of diameter at breast height (mm)

BA: Basal area per hectare (m2 ha-1)

N: Number of trees per hectare (ha-1)

 Climate data
_Both climate variables were calculated for the period between the second and the third inventory._

P: Mean annual precipitation sum (mm)

mT: Mean annual air temperature (°C)

en:
The dataset comprises > 90 000 records from inventories in 54 strict forest reserves in [Switzerland](https://www.wsl.ch/de/wald/biodiversitaet-naturschutz-urwald/naturwaldreservate.html) and [Lower Saxony / Germany](http://naturwaelder.de/) along a considerable environmental gradient. It was used to develop parsimonious, species-specific mortality models for 18 European tree species based on tree size and growth as well as additional covariates on stand structure and climate.

 Inventory data
Measurements had been conducted repeatedly on up to 14 permanent plots per reserve for up to 60 years with re-measurement intervals of 4 - 27 years. The permanent plots vary in size between 0.03 and 3.47 ha. The inventories provide diameter measurements at breast height (DBH) and information on the species and status (alive or dead) of trees with DBH ≥ 4 cm for Switzerland and ≥ 7 cm for Germany.

 Data selection
We excluded three permanent plots where at least 80 % of the trees died during an interval of 10 years, and mortality could be clearly assigned to a disturbance agent. Mortality in the remaining stands was rather low, with a mean annual mortality rate of 1.5 % and strong variation between plots from 0 to 6.5 % (assessed for trees of all species with DBH ≥ 7 cm).
We only used data from permanent plots with at least 20 trees per species to obtain reliable plot-level mortality rates even for species with low mortality rates (about 5 % during 10 years), and selected tree species occurring on at least 10 plots to cover sufficient ecological gradients. This led to a dataset of 197 permanent plots and 18 tree or shrub species: _Abies alba_ Mill., _Acer campestre_ L., _Acer pseudoplatanus_ L., _Alnus incana_ Moench., _Betula pendula_ Roth, _Carpinus betulus_ L., _Cornus mas_ L., _Corylus avellana_ L., _Fagus sylvatica_ L., _Fraxinus excelsior_ L., _Picea abies_ (L.) Karst, _Pinus mugo_ Turra, _Pinus sylvestris_ L., _Quercus pubescens_ Willd., _Quercus_ spp. (_Q. petraea_ Liebl. and _Q. robur_ L.; not properly differentiated in the Swiss inventories), _Sorbus aria_ Crantz, _Tilia cordata_ Mill. and _Ulmus glabra_ Huds..

 Predictors of tree mortality
We considered tree size and growth as key indicators for mortality risk. Radial stem growth between the first and second inventory and DBH at the second inventory were used to predict tree status (alive or dead) at the third inventory. To this end, the annual relative basal area increment (relBAI) was calculated as the compound annual growth rate of the trees basal area. Additional covariates on stand structure and climate comprise mean annual precipitation sum (P), mean annual air temperature (mT), the mean and the interquartile range of DBH (mDBH, iqrDBH), basal area (BA) and the number of trees (N) per hectare.

 Further information
For further information, refer to Hülsmann _et al_. (in press) How to kill a tree – Empirical mortality models for eighteen species and their performance in a dynamic forest model. _Ecological Applications_.

empirical-mortality-models

display_name: empirical-mortality-models

forest-reserves

display_name: forest-reserves

inventory-data

display_name: inventory-data

tree-growth

display_name: tree-growth

tree-mortality

display_name: tree-mortality

en: Calibration data for empirical mortality models of 18 European tree species


en: carrion carcass wolf yellowstone detritus bacteria fungi soil-biodiversity biogeochemical-cycling decomposition

en:
Site	ID for different carcasses across the Yellowstone Landscape
Location	Sampling location, either under carcass or control plot
Species	Indicating whether carcass was from bison or elk
Gender	Gener of carcass; F = female, M = male, ? = unknown
Lat	Latitude
Long	Longitude
DSK	Days since kill; in days
Soil.N	Soil N concentration (%)
Soil.C	Soil C concentration (%)
Veg.C	Vegetation C concentration (%); dominant grasses sampled
Veg.N	Vegetation N concentration (%); dominant grasses sampled
Veg.CtoN	Vegetation C to N ratio; dominant grasses sampled
Soil.resp	Soil respiration (g m-2 h-1)
soil.temp	Soil temperature (°C)
Soil.moist	Soil moisture (volumentric; %)
CRR	Cotton rotting rate
bacteria.richness	Bacteria richness
bacteria.diversity	Bacteria diverstiy
fungi.richness	Fungi richness
fungi.diversity	Fungi diversity
bacteria.abundance	Bacteria abundance
fungi.abundance	Fungi abundance

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch, A.C., Frossard, A., Schütz, M., Frey, B., Morris, A.W., Bump, J.K. (accepted) Effects of elk and bison carcasses on soil microbial communities and ecosystem functions in Yellowstone, USA. (accepted). Functional Ecology
doi: ...

Methods
Study area and study sites
This study was conducted in YNP’s Northern Range (NR), located in north-western Wyoming and south-western Montana, USA (~44.9163° N, 110.4169° W). The NR expands over ~1000 km2 and features long cold winters and short dry summers. Grasslands and shrublands dominate the NR that is the home of large migratory herds of bison (winter counts 2017: ~3919 individuals; Geremia, Wallen, & White, 2017) and elk (~5349 individuals) as well as their main predators, approximately five packs of wolves with a total of 33 individuals (Smith et al., 2017). As part of a long-term research program within YNP, wolf predation has been studied since their reintroduction in 1995.
For our study, we received ground-truthed coordinates of bison and elk carcasses from winter 2016/17 (November 2016 through April 2017) from the YNP Wolf Project. Between June 20 and July 1, 2017, we visited 24 carcasses in total. At five sites, we could not sample as the carcasses were no longer found. In total we located remains (hairmats, rumen content, bones, teeth) of 19 adult male and female carcasses (7 bison, 12 elk; Supplementary Table 1). Live body weights of adult bison and elk are approximately 730 kg (male bison), 450 kg (female bison), 330 kg (male elk), and 235 kg (female elk, Meagher, 1973; Quimby & Johnson, 1951).
The kills and subsequent consumption happened between 34 and 173 days prior to our sampling (hereafter “days since kill”, DSK), for which we accounted in our statistics. Note that wolves and other scavengers consumed the soft tissue of the carcasses quickly, hence, there is close to no soft tissue left for decomposition as compared to an intact body left on the soil surface. The 19 carcass sites covered the extent of YNP’s NR, with both bison and elk carcasses showing similar distributions; elevation ranged from 1703 to 2884 m a.s.l. (Supplementary Fig 1 & Supplementary Table 1). The carcasses were all located in grassland or sage-brush shrubland, with or without sparsely scattered trees, and both bison and elk carcasses showed the same distribution of DSK. At each study site, we selected a reference plot (hereafter “control”) that was of comparable size, slope aspect and vegetation to the carcass location (hereafter “carcass”). The control was at least 10 m away (Danell, Berteaux, & Brathen, 2002; Melis et al., 2007) from the carcass itself to ensure the absence of potential direct and indirect carcass effects (paired design; (Bump, Webster, et al., 2009; Bump, Peterson, et al., 2009).

Ecosystem functions and soil properties
We randomly collected 50 g of mineral soil from three locations on both control and carcass plots to a depth of 5 cm with sterile techniques and gently mixed the material to obtain a composite sample. Half the soil sample was immediately bagged in plastic bags (whirl packs), stored in a cooler with ice packs (~5 ºC), sieved (2-mm) and frozen within 4-6 hours of collection to assess soil microbial communities. For this purpose, we extracted total genomic DNA from 0.5 g soil using the PowerSoil DNA Isolation Kit (Qiagen, Hilden, Germany). DNA concentrations were measured using PicoGreen (Molecular Probes, Eugene, OR, USA). PCR amplifications of partial bacterial small-subunit ribosomal RNA genes (region V3–V4 of 16S rRNA) and fungal ribosomal internal transcribed spacers (region ITS2) were performed as described previously (Frey et al., 2016). Each sample consisting of 40 ng DNA was amplified in triplicate and pooled before purification with Agencourt AMPure XP beads (Beckman Colter, Berea, CA, USA) and quantified with the Qubit 2.0 fluorometric system (Life Technologies, Paisley, UK). Amplicons were sent to the Genome Quebec Innovation Center (Montreal, Canada) for barcoding using the Fluidigm Access Array technology and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, CA, USA).
Quality control of bacterial and fungal reads was performed using a customized pipeline (Supplementary Table 2; Frey et al., 2016). Paired-ends reads were matched with USEARCH (Edgar & Flyvbjerg, 2015), substitution errors were corrected using Bayeshammer (Nikolenko, Korobeynikov, & Alekseyev, 2013) and PCR primers were trimmed (allowing for 1 mismatch, read length >300 bp for 16S and >200 bp for ITS primers) using Cutadapt (M. Martin, 2011). Sequences were dereplicated and singleton reads removed prior to clustering into operational taxonomic units (OTUs) at 97% identity using USEARCH (Edgar, 2013). The remaining centroid sequences were tested for the presence of ribosomal signatures using Metaxa2 (Bengtsson-Palme et al., 2015) or ITSx (Bengtsson-Palme et al., 2013). Taxonomic assignments of the OTUs were obtained using Bayesian classifier (Wang, Garrity, Tiedje, & Cole, 2007) with a minimum bootstrap support of 60% implemented in mothur (Schloss et al., 2009) by querying the bacterial and fungal reads against the SILVA Release 128 (Quast et al., 2013) and UNITE 8.0 (Abarenkov et al., 2010) reference databases for 16S and ITS OTUs, respectively.
Abundances of the bacterial 16S rRNA gene and fungal ITS amplicon were determined by quantitative real-time PCR (qPCR) on an ABI7500 Fast Real-Time PCR system (Applied Biosystems, Foster City, CA, USA) as described previously (Frossard et al., 2018). The same primers (without barcodes) and cycling conditions as for the sequencing approach were used for the 16S and ITS qPCR. Three standard curves per target region were obtained using tenfold serial dilutions of plasmids generated from cloned targets (Frey, Niklaus, Kremer, Lüscher, & Zimmermann, 2011). Data were converted to represent mean copy number of targets per gram of soil (dry weight).
The other half of the soil sample was bagged in paper, dried to constant weight at 60°C, passed through a 2 mm sieve and analyzed for total C and N concentration with a CE Instruments NC 2100 soil analyzer (CE Elantech Inc., Lakewood NJ, USA). We also collected 20 mature and undamaged leaves of the dominant grass species growing on control and carcass sites, but taxa were not recorded. The plant material was dried at 60°C, finely ground till homogenized and also analyzed to obtain total C and N concentrations. Soil temperature (10 cm depth) was measured with a waterproof digital thermometer (Barnstead International, Dubuque IA, USA) at three locations each at the control and carcass site. Soil moisture (0 – 10 cm depth) was measured with time domain reflectometry (Field-Scout TDR-100; Spectrum Technologies, Plainfield IL, USA) at five randomly chosen points on control and carcass sites. We measured soil respiration at five randomly chosen points at both control and carcass sites with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA). For each measurement the soil chamber (15 cm high; 10 cm diameter) was tightly placed on the soil surface, after clipping plants to avoid measuring plant respiration or photosynthesis. Measurements were conducted over 120 s.
In addition, we assessed the decomposition rates of standardized OM using the cotton strip assay (Latter & Howson, 1977; Latter & Walton, 1988). Cotton cloth tensile strength loss (CTSL) is a measure of decomposition, and an index to express the combined effect of soil microclimatic, physical, chemical and biological properties on decomposition while accounting for OM quality (Latter & Walton, 1988; Risch, Jurgensen, & Frank, 2007; Withington & Sanford Jr., 2007). We placed five 20 cm wide x 13 cm long sheets of 100% unbleached cotton cloth (American Type SM 1/18’’, Warp: 34/1, Weft: 20/1, Weave plain, 29.5 picks/cm warp, 22 picks/cm weft, 237 g/m2; Daniel Jenny & Co., Switzerland;) at each carcass and control site vertically into the soil by making slits with a flat spade to a depth of 12 cm. We inserted each cloth with the spade, and then pushed the slit closed to assure tight contact with the soil. The cloths were retrieved after 18 to 27 days. After retrieval, the cloths were air-dried, remaining soil gently removed by hand, and 1.5 cm wide strips were cut at the 3.5-5.0 cm (top) and the 9-10.5 cm (bottom) soil depth. The strips were equilibrated at 50 % relative humidity and 20°C for 48 hours (climate chamber) prior to strength testing (Scanpro Awetron TH-1 tensile strength tester; AB Lorentzen and Wettre, Kista, Sweden). Cotton rotting rate (CRR) = (CTScontrol - CTSfinal/CTSfinal)1/3 * (365/t), where CTScontrol is the cotton tensile strength of a control cloth and CTSfinal the cotton tensile strength of the incubated sample, t is the incubation period in days. Control cloths were inserted into the ground and immediately retrieved to account for tensile strength loss associated with cloth insertion. We averaged the CRR of top and bottom strips for further analyses as no difference was found between the two. All sampling and cloth insertion took place between June 20 and July 1, 2017, cloths were retrieved between July 17 and 20, 2017. Soil respiration, average CRR, vegetation N concentration and vegetation C:N ratio are defined as ecosystem functions, soil C and N concentration, soil temperature and moisture as soil abiotic properties, and bacterial and fungal richness (number of taxa), diversity (Shannon) and abundance as soil biotic properties.

Statistical analyses
Univariate analyses for ecosystem functions, soil biotic and abiotic properties
We tested whether individual ecosystem functions, soil biotic and abiotic properties differed between carcass and control (“Location”), bison and elk (“Species”) and days since kill (“DSK”). For this purpose, we used linear mixed effect models (LMM, “nlme” package v 3.1 – 131.1 in R v 3.4.4; Pinheiro, Bates, DebRoy, & Sarkar, 2018; R Core Team, 2019) with Location, Species, Location x Species and DSK as fixed effects. Site was included as random effect to account for the paired design. We developed a separate model for all dependent variables. All but bacterial richness, fungal richness, fungal diversity and vegetation N concentration were natural-log transformed to meet model assumptions. For each LMM, we calculated contrasts to assess the specific comparisons we were interested in with the “lsmeans” package v 2.27-62 (Lenth & Love, 2018): 1) carcass vs control, 2) carcass bison vs control bison, and 3) carcass elk vs control elk. We also tested whether we had differences between bison and elk carcasses or the sites where bison and elk were killed and included contrasts 4) carcass bison vs carcass elk and 5) control bison vs control elk.
We calculated the log response ratio (LRR = ln[carcass/control]) to obtain carcass effects for all variables for both species separately. LRR < 0 indicates higher value at control compared to carcass, LRR > 0 indicates higher values at carcass compared control. We used LRRs for visualization and to assess spatial patterns in carcass effects across YNP. For this purpose we calculated the Moran’s I statistic for each ecosystem function, soil biotic and abiotic property based on a latitude-longitude matrix with the “moran.test” function in the “spdep” package version 1.1-3 (Bivand et al., 2019).
Multivariate analyses
Rare OTUs, defined as OTUs with a low abundance of reads, were retained in multivariate methods because they only marginally influence these analyses (Gobet, Quince, & Ramette, 2010). Bray–Curtis dissimilarity matrices were generated based on square-root-transformed matrices. We used Principal Coordinate Analyses (PCoA) to assess how soil bacterial and fungal communities differed between control and carcass of bison and elk (“vegan” package v 2.5-4, Oksanen et al., 2019). We then extracted PCoA axes scores 1 and 2 and used LMM (“nlme” package) with Location, Species, Location x Species and DSK as fixed effects. Site was, again, included as random effect. We again calculated the contrasts as described above using the “lsmeans” package. We also assessed how ecosystem functions, and soil abiotic and biotic properties were related to the soil bacteria and fungi community structure associated with bison and elk control and carcasses using the “envfit” function in the “vegan” package (Oksanen et al., 2019).
Indicator species analyses were performed using the multipatt function implemented in the “indicspecies” package version 1.7.6 with 100000 permutations (De Caceres & Jansen, 2016). This step allowed to identify OTUs that led to changes in multivariate patterns between control and carcass of both bison and elk separately (De Cáceres, Legendre, & Moretti, 2010). The multipatt function uses a point biserial correlation coefficient statistical test. Indicator OTUs were defined as bacterial and fungal OTUs with more than 50 sequences, i.e., removing rare taxa and taxa with low abundances containing little indicator information (Rime et al., 2015) and that were significantly correlated with Location (p < 0.05, correlation coefficient > 0.3). A heatmap of these OTUs were generated with the vegan and ggplot2 packages. The indicator analyses were performed in R version 3.3.3 (R Core Team, 2017).

References
Abarenkov, K., Henrik Nilsson, R., Larsson, K.-H., Alexander, I. J., Eberhardt, U., Erland, S., … Kõljalg, U. (2010). The UNITE database for molecular identification of fungi – recent updates and future perspectives. New Phytologist, 186(2), 281–285. doi:10.1111/j.1469-8137.2009.03160.x
Bengtsson-Palme, J., Hartmann, M., Eriksson, K. M., Pal, C., Thorell, K., Larsson, D. G. J., & Nilsson, R. H. (2015). metaxa2: improved identification and taxonomic classification of small and large subunit rRNA in metagenomic data. Molecular Ecology Resources, 15(6), 1403–1414. doi:10.1111/1755-0998.12399
Bengtsson-Palme, J., Ryberg, M., Hartmann, M., Branco, S., Wang, Z., Godhe, A., … Nilsson, R. H. (2013). Improved software detection and extraction of ITS1 and ITS2 from ribosomal ITS sequences of fungi and other eukaryotes for analysis of environmental sequencing data. Methods in Ecology and Evolution, 4(10), 914–919. doi:10.1111/2041-210X.12073
Bivand, R., Altman, M., Anselin, L., Assuncao, R., Berke, O., Blanchet, G., … Yu, D. (2019). spdep: Spatial dependence, weighthing schemes, statistics. R package version 1.1-3.
Bump, J. K., Peterson, R. O., & Vucetich, J. A. (2009). Wolves modulate soil nutrient heterogeneity and foliar nitrogen by configuring the distribution of ungulate carcasses. Ecology, 90(11), 3159–3167.
Bump, J. K., Webster, C. R., Vucetich, J. A., Peterson, R. O., Shields, J. M., & Powers, M. D. (2009). Ungulate carcasses perforate ecological filters and create biogeochemical hotspots in forest herbaceous layers allowing trees a competitive advantage. Ecosystems, 12(6), 996–1007. doi:10.1007/s10021-009-9274-0
Danell, K., Berteaux, D., & Brathen, K. A. (2002). Effect of muskox carcasses on nitrogen concentration in tundra vegetation. Arctic, 55(4), 389392.
De Caceres, M., & Jansen, F. (2016). indicspecies: relationship between species and groups of species. R package version 1.7.6.
De Cáceres, M., Legendre, P., & Moretti, M. (2010). Improving indicator species analysis by combining groups of sites. Oikos, 119(10), 1674–1684. doi:10.1111/j.1600-0706.2010.18334.x
Edgar, R. C. (2013). UPARSE: highly accurate OTU sequences from microbial amplicon reads. Nature Methods, 10, 996.
Edgar, R. C., & Flyvbjerg, H. (2015). Error filtering, pair assembly and error correction for next-generation sequencing reads. Bioinformatics, 31(21), 3476–3482. doi:10.1093/bioinformatics/btv401
Frey, B., Niklaus, P. A., Kremer, J., Lüscher, P., & Zimmermann, S. (2011). Heavy-machinery traffic impacts methane emissions as well as methanogen abundance and community structure in oxic forest soils. Applied and Environmental Microbiology, 77(17), 6060–6068. doi:10.1128/AEM.05206-11
Frey, B., Rime, T., Phillips, M., Stierli, B., Hajdas, I., Widmer, F., & Hartmann, M. (2016). Microbial diversity in European alpine permafrost and active layers. FEMS Microbial Ecology, 92(3), fiw018.
Frossard, A., Donhauser, J., Mestrot, A., Gygax, S., Bååth, E., & Frey, B. (2018). Long- and short-term effects of mercury pollution on the soil microbiome. Soil Biology and Biochemistry, 120, 191–199. doi:https://doi.org/10.1016/j.soilbio.2018.01.028
Geremia, C., Wallen, R., & White, P. J. (2017). Status report of the Yellowstone bison population, September 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center for Resources.
Gobet, A., Quince, C., & Ramette, A. (2010). Multivariate cutoff level analysis (MultiCoLA) of large community data sets. Nucleic Acids Research, 38(15), e155–e155. doi:10.1093/nar/gkq545
Latter, P., & Howson, G. (1977). The use of cotton strips to indicate cellulose decomposition in the field. Pedobiologia, (17), 145–155.
Latter, P., & Walton, D. (1988). The cotton strip assay for cellulose decomposition studies in soil: history of the assay and development. In Cotton strip assay: an index for decomposition in soils (pp. 7–9). ITE Symposium, Institute of Terrestrial Ecology, Natural Environment Research Council, UK.
Lenth, R., & Love, J. (2018). lsmeans: least-squares means. R package version 2.27-62.
Martin, M. (2011). Cutadapt removes adapter sequences from high-throughput sequencing reads. EMBnet.Journal, 17(1), 10–12.
Meagher, M. M. (1973). The bison of Yellowstone National Park. NPS Scientific Monograph (Vol. 1). National Park Service, Yellowstone Center for Resources.
Melis, C., Selva, N., Teurlings, I., Skarpe, C., Linnell, J. D. C., & Andersen, R. (2007). Soil and vegetation nutrient response to bison carcasses in Białowieża Primeval Forest, Poland. Ecological Research, 22(5), 807–813. doi:10.1007/s11284-006-0321-4
Nikolenko, S. I., Korobeynikov, A. I., & Alekseyev, M. A. (2013). BayesHammer: Bayesian clustering for error correction in single-cell sequencing. BMC Genomics, 14(1), S7. doi:10.1186/1471-2164-14-S1-S7
Oksanen, J., Blanchet, F. G., Friendly, M., Kindt, R., Legendre, P., McGlinn, D., … Wagner, H. H. (2019). vegan: community ecology package. R package version 2.5-4.
Pinheiro, J., Bates, D., DebRoy, S., & Sarkar, D. (2018). nlme: Linear and nonlinear mixed effect models. R package version 3.1-131.1.
Quast, C., Pruesse, E., Yilmaz, P., Gerken, J., Schweer, T., Yarza, P., … Glöckner, F. O. (2013). The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research, 41(Database issue), D590–D596. doi:10.1093/nar/gks1219
Quimby, D. C., & Johnson, D. E. (1951). Weights and measurements of Rocky Mountain elk. Journal of Wildlife Management, 15, 57–62.
R Core Team. (2017). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Zurich, Switzerland.
R Core Team. (2019). R: A language and environment for statistical computing. Vienna, Austria: R Foundation for Statistical Computing.
Rime, T., Hartmann, M., Brunner, I., Widmer, F., Zeyer, J., & Frey, B. (2015). Vertical distribution of the soil microbiota along a successional gradient in a glacier forefield. Molecular Ecology, 24(5), 1091–1108. doi:10.1111/mec.13051
Risch, A. C., Jurgensen, M. F., & Frank, D. A. (2007). Effects of grazing and soil micro-climate on decomposition rates in a spatio-temporally heterogeneous grassland. Plant and Soil, 298(1–2), 191–201. doi:10.1007/s11104-007-9354-x
Schloss, P. D., Westcott, S. L., Ryabin, T., Hall, J. R., Hartmann, M., Hollister, E. B., … Weber, C. F. (2009). Introducing mothur: open-source, platform-independent, community-supported software for describing and comparing microbial communities. Applied and Environmental Microbiology, 75(23), 7537–7541. doi:10.1128/AEM.01541-09
Smith, D., Stahler, D., Cassidy, K., Stahler, E., Metz, M., Cassidy, B., … Cato, E. (2018). Yellowstone National Park wolf project annual report 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center of Resources.
Wang, Q., Garrity, G. M., Tiedje, J. M., & Cole, J. R. (2007). Naive Bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy. Applied and Environmental Microbiology, 73(16), 5261–5267. doi:10.1128/AEM.00062-07
Withington, C., & Sanford Jr., R. (2007). Decomposition rates of buried substances increase with altitude in a forest-alpine tundra ecotone. Soil Biology and Biochemistry, (39), 68–75.

Please cite this paper together with the citation for the datafile.

bacteria

display_name: bacteria

biogeochemical-cycling

display_name: biogeochemical-cycling

carcass

display_name: carcass

carrion

display_name: carrion

decomposition

display_name: decomposition

detritus

display_name: detritus

fungi

display_name: fungi

soil-biodiversity

display_name: soil-biodiversity

wolf

display_name: wolf

yellowstone

display_name: yellowstone

education

en: Education and science

en: Elk and bison carcasses in Yellowstone, USA


maintainer: Axel Volkwein

en: rockfall field-tests impact-testing field-data experiment experiments mass-movements field-test natural-hazard rockfall-experiments

en: Acceleration measurements

media_type: application/zip

en: The zip file contains five excel files, one for each test conducted. The first sheet contains the raw data and a data set that went through a low-pass filter. The sheet "Allgemein" contains calibration factors for the sensors and time details of a test. The sheets "DiaDaten" and "DiaDatenGefiltert" show the measurements over time. The block and slab kinetics are determined in the sheets "ZeitintegrationBlock" and "ZeitintegrationPlatte". The sheet "VergleichBeschleunigungen" shows the influence of the low-pass-filter and a running average filter on the block accelerations.

en: Video analysis

en: The zip contains five Excel-files that in turn contain the results of the performed video analyses. The sheet "Daten" contains the pixels of different positions on the blocks that were tracked by the software "Kinovea". The sheet "Auswertung" determines the block kinetics based on the pixel data over time.

en: Raw data (high speed videos, acceleration measurements, laboratory tests)

en:
This file contains

* the high speed videos showing the concrete blocks impacting the gallery roof.
* the raw data of the acceleration measurements
* the data of Tiefbauamt Graubünden containg the tension tests of gallery reinforcment, ME-testing the cushion layer and the tests on concrete samples.

en: Five full-scale field tests were conducted with concrete blocks weighting between 800 and 3200 kg being dropped onto the roof of a gallery structure made from reinforced concrete. The impacts were recorded using high-speed video and acceleration measurements at the falling blocks. The dataset contains the raw data as well as the analyses of the block trajectories, i.e. kinetics and dynamics. Setup of the measurements and the analyses conducted are published in Volkwein, A. "Durchführung und Auswertung von Steinschlagversuchen auf eine Stahlbetongalerie", WSL-Berichte, Heft 68, 2018.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

impact-testing

display_name: impact-testing

mass-movements

display_name: mass-movements

natural-hazard

display_name: natural-hazard

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

en: Rockfall gallery testing Parde 2016


en: foresty treeline-ecosystems stillberg davos afforestation mountain-forest

en: Documentation

media_type: application/msword

mimetype: application/msword

en: Site photo

media_type: JPEG

en: Dataset V1

media_type: GDB

en: This dataset has been depricated in favour of an updated version.

format: GDB

en:
#Background Information

A history of many centuries of seasonal livestock grazing of alpine pastures has significantly depressed the treeline in many European mountain ranges. Therefore, observations of treeline patterns are more likely to be obscured by historical land use than in regions with less human influence and might not provide relevant information about environmental factors that influence mortality and growth patterns at the natural high-elevation limit of tree existence. To overcome this, we used a large afforestation experiment in the Swiss Alps, "Stillberg", to address the following questions:

Can trees survive above the current treeline in the European Alps? Are environmental factors that influence spatial patterns of mortality the same as those that influence height growth? Does the relative importance of these environmental variables change over the first 40 years after planting as seedlings?

#Dataset
The 5 ha Stillberg long-term afforestation research area is located near Davos (Central Alps, Switzerland). The bottom of the afforestation is approximately at the current treeline and it covers an altitudinal gradient of more than 150 m (2075 to 2230 m a.s.l.; see picture above). Approximately 92'000 seedlings of three treeline species (Larix decidua, Pinus mugo ssp. uncinata and Pinus cembra) were systematically planted in 1975, and mortality and height growth were closely monitored during the following 40 years.

Publications
Barbeito, I., Dawes, M. A., Rixen, C., Senn, J. and Bebi, P. (2012), Factors driving mortality and growth at treeline: a 30-year experiment of 92 000 conifers. Ecology, 93: 389–401. http://dx.doi.org/10.1890/11-0384.1

afforestation

display_name: afforestation

davos

display_name: davos

foresty

display_name: foresty

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline-ecosystems

display_name: treeline-ecosystems

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Long-term treeline research dataset at Stillberg, Davos


maintainer: Roksolana Petrovska

en: fagus lar regeneration dominance shade-tolerance acer mortality-rate

media_type: r script (flat-ascii text)

en: The R-script of survival analysis for accelerated failure time model

en: Mortality of regeneration

media_type: CSV

en: Acer platanoides, Acer pseudoplatanus and Fagus sylvatica living and dead juveniles (0-500 cm in height) grown in the deep shade of a prime beech-dominated forest.

en:
 One individual per species, vitality class (low and high) and height class (eight classes: 0–10, 11–20, 21–35, 36–60, 61–90, 91–130, 131–200 and 201–500 cm) was randomly selected and harvested in each of the six plots. This resulted in a sample of 82, 80 and 89 living individuals of A. platanoides, A. pseudoplatanus and F. sylvatica, respectively.

 Additionally stems of dead Acer spp. and F. sylvatica trees that had died within the last three years (2015–2018) were randomly harvested, matching the height classes of the harvested living trees wherever possible. In total, 179 dead young trees (60 A. platanoides, 72 A. pseudoplatanus and 47 F. sylvatica) were collected.

 Variables:
* species_code: a_pla - Acer platanoides, a_pse - Acer pseudoplatanus, f_syl - Fagus sylvatica
* species: as above
* dummy: 0 - living individual, 1 - dead individual
* LAR_cm2_g: leaf area ratio or ratio of leaf area to total plant biomass, [cm2/g]
* tree_age: in years
* avg_ring_micron: average width of the last 5 rings in tree life excluding the last ring
* dry_mass_g: aboveground and belowground biomass
* DLI: direct light index (measured only under living individuals)
* BLI: diffuse light index (measured only under living individuals)
* GLI: global light index

acer

display_name: acer

dominance

display_name: dominance

fagus

display_name: fagus

lar

display_name: lar

mortality-rate

display_name: mortality-rate

regeneration

display_name: regeneration

shade-tolerance

display_name: shade-tolerance

education

en: Education and science

en: Mortality of regeneration: Acer spp. and Fagus sylvatica