en: land-use switzerland urbanization statistical-model landscape-services land-use-change modeling

en: Scripts for Assessing potential landscape service trade-offs driven by urbanization in Switzerland

en:
Scripts ordered by their main purpose within sequential folders in this ReadMe marked with

Within the folders the capital letters refer to the parallel or sequential use of the scripts; scripts here in ReadMe are marked with

 00_Function Scripts
 Functions.r
Script containing several functions for analyzing statistical models: cohen.kappa, meva.table, D2, max-Tss, plot-TSS

 Service_functions.R
Script containing functions for calculating all services and returning sums (and median for bd and rec) as well as rasters

 01_Data Preparation
 A_AS_raster_preparation.R
Preparation of the land use rasters for the years 1985, 1997, and 2009 based on the original Arealstatistik (AS/ASCH); Assigning our categories and assining new values to all "construction sites" for calibrating the models
For model projection starting point (2009) and for service calculations (all ASCH years) the "other" categories were assigned to the land use categories based on dominant neighbor, so that there were no empty cells
Creation of water & mountainous area raster that stayed stable throughout the projections
Creation of MFH raster (2009), to have as base for all new projection years, as this category never becames any other

 B_Factors_preparation.R
Preparation of the factor rasters that were used to calculate service values per cell (see Table 2): LWfactor, Transportation, Vol, Rivers, Lakes, slope, TWW, Hazard_risk

 B_Predictors_preparation.R
Preparation of the raster of the predictors used for calibrating (ASCH years) and projecting (stable) the transition models that do not depend on the land use categories: Temperature (ASCH years), solar radiation (stable), Public transportation access (stable), Elevation (stable), Workers density (ASCH years), Population change (ASCH transitions)

 B_Regions_preparation.R
Preparation of bioregions as raster to be used to mask asxxxx later to calculated services and land use area just for one region

 C_Pred_proj.R
Projecting the dynamic predictors into the future for projecting the land use transitions with the model: Linear extrapolations for workers densities and population; more detailed extrapolation of temperature (based on data for all stations that matched between the temp table we used for the calibration period and the projections from CS2M, and then making a spatial interpolation for all years based on the interpolation of temperature for all years per station)

 02_Model calibration
 A_Bioreg_pred_corr.R
Calculating correlation between the predictors for each bioregion and land use category, Output are those with too high correlation so that one predictor can be removed from transitions were both predictors occur

 A_trans_numbers_bioreg.R
Calculate transition numbers for each bioregion to decide which transitions to primarily consider

 B_Bioreg_ext_eval.R
Calculating TSS based on the external evaluation for the bioregion transitions that happened often enough to try to model them (calibration data: 85-97, evaluation data: 97-09)

 B_Bioreg_int_eval.R
Calculating TSS based on the internal evaluation for the bioregion transitions that happened often enough to try to model them (calibration data: 70%, evaluation data: 30%)

 C_Bioreg_TSS_analysis.R
Extracting TSS numbers from internal and external evaluation, calculating mean and median for each transition for each region for each evaluation method and saving as csv per region to be able to select only the transitions with high enough model performance

 D_Bioreg_Models_for_prediction.R
Calibration of the models that were then used to project land use transitions into the future; calibrated separately for each bioregion

 E_Residuals_trans_models.R
Calculation of Moran's I statistics to analyze the residuals of the land use transition models

 03_Projections
 A_Bioreg_Projections_run.R
Master script for: Extrapolaitng into the future with the regional models and then assembling for each time step to calculate new AS predictors; Several Outputs: txt file to test for NAs in Predictors, txt file with random seed number for sampling, txt file with times for calculation steps (check progress of script while running), csv sheet with projected transition frequencies, tif-rasters for every region and time step, pdf with raster plot for every region and time step

 04_Service calculation
 A_Bioreg_as_services.R
Calculate services per bioregion for years 1985, 1997, 2009

 A_Service_calculation_bioregions.R
Extracting service numbers(sums) per bioregions for all projection runs and storing them in a list of matrixes to be available for further plotting; can be run for swiss wide projections or regional ones

 05_Analysis
 A_Bioreg_ASCH_development.R
Extracting the occurrence of each category per region for all runs (first part), then for ASCH years, and then plotting them nicely; only works for regional projections

 A_Bioreg_Predictors_importanceD2.R
Calculating D2 for each transition and each considered predictor from bivariate models to get value of importance

 B_Bioreg_Pred_imp_analysis.R
Using calculated D2 to sort Predictors according to their importance for each transition

 A_Bioreg_Spatial_results_analysis.R
Plotting randomly sampled runs for ASCH and services to analyses their spatial development

 A_Bioreg_Transition_numbers_check_v1.R
Analyzing the frequency for all transitions for all regions and producing the point plots for each transition separately

 A_Bioreg_Transition_numbers_check_v2.R
Analyzing percentage and numbers of all transitions but plotting them per region and originating ASCH category

 B_Transition_Analysis.R
Further Analysis of transition numbers

 A_Service_analysis.R
Plotting of the service development for bioregions in several ways for analyzing

en: Data for Assessing potential landscape service trade-offs driven by urbanization in Switzerland

en:
The provided folder structure follows the set up of the scripts.
Data is only provided when it has been fully produced by us, otherwise dummies are given.
For data that will be produced by one of the scripts, no dummies are given.
The folders may contain sub-folders, which would be filled if the scripts were all run

 00_Analysis_Data
Data produced throughout the process of the calibration and projection that is later needed for analysis

 01_Raw_Data
Primary data from external sources that were used to compile the rasters and numbers used during the calibration and projection of landscape transitions as well as service calculation

 02_Prepared_Data
Data that will be prepared for further use by scripts are put in here
Additionally it contains the parameter sheets for the transition predictors that we compiled

 03_Model_Data
 Model outputs
Folder were the projection models statistics will be saved
 Models
Folder into which the actual transition models will be saved
 Residuals
Folder into which data on models residuals will be saved for future use

 04_Projected_Data
The output of the projections will be saved into this folder

 05_Service_Data
Any service calculations will be saved in here

 06_Results_Analysis
Any Analysis plots and tables as well as intermediate data will be saved here in the respective sub-folder

en:
Data and scripts of publication:

Madleina Gerecke, Oskar Hagen, Janine Bolliger, Anna M. Hersperger, Felix Kienast, Bronwyn Price, Loïc Pellissier (2019) Assessing potential landscape service trade-offs driven by urbanization in Switzerland. Palgrave communications.

Contains land use projections for Switzerland and scripts and data for these projections as well as the calculation of landscape services.

Data Folder:
Contains sub-folder with the data necessary for this study (provided were no copyright issues, otherwise placeholders with descriptions), and folders where produced data may be stored

Scripts Folder:
Contains scripts organized into subfolders depending on their purpose

Note: Some abbreviations within the scripts and data are derived from German words and not English.

land-use

display_name: land-use

land-use-change

display_name: land-use-change

landscape-services

display_name: landscape-services

modeling

display_name: modeling

statistical-model

display_name: statistical-model

switzerland

display_name: switzerland

urbanization

display_name: urbanization

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Land use projections and services for Switzerland


maintainer: EnviDat Support

en: snow arctic antarctica ice sea-salt-aerosol

state: active

type: dataset

en: Fig 1F

media_type: text/plain

en: Data to Figure 1F

format: TXT

mimetype: text/plain

en: Fig 1E

en: Data to Figure 1E

en: Fig 1F_2

en: Individual data to mean shown in Figure 1F

en: Fig 1B

en: Data in Figure 1B

en: Fig 1F_1

en: Fig 1A

en: Data Figure 1A

en: Code

media_type: m

en: Matlab code to read and plot the data

format: SERVICE

en: Fig 1C

en: Data to Figure 1C

en: Table 2

en: This table lists all NEXAFS data files in chronological order with PE carbon to oxygen signal intensity ratios -from which the atomic ratio were calculated in the paper - before ("preCtoO") and after ("postCtoO") each NEXAFS measurement. Also listed is the change in Na ("lossSodi"), O ("lossOxy"), Cl ("lossChlor"), and C ("lossCarb") signal intensity after the NEXAFS measurement compared to prior to the NEXAFS measurement.

en: Fig 1B_2

en: Individual data to mean shown in Figure 1B

en: Fig 1D

en: Data to Figure 1D

en: Fib 1B_3

en: Read Me

media_type: application/pdf

en: Description of the data tables

format: PDF

mimetype: application/pdf

en: This table lists all data files in chronological order. "SampleTemp" refers to the reading of the PT-1000 at the side of the sample holder. "cellPressure" is the water vapour pressure during the measurements. From this, in presence of ice, the temperature of the ice sample can be calculated which is given in the column "iceTemp". "dT" is the difference, or temperature offset, between sensor's reading and the ice samples temperature. The offset is due to the sensor being mounted away from the cooled spot of the sample were it experiences heating from warmer parts of the sample holder. The off-set is used to calibrate the temperature sensor and the resulting temperature during the experiments is given in the column "temperature". "relHum" is the relative humidity above (supercooled) liquid and "concBrine" is the concentration of a NaCl solution in mol/l in equilibrium with ice at the experimental temperature. "Area" is the integrated PE signal.

en: Laboratory experiments are presented on the phase change at the surface of sodium chloride – water mixtures at temperatures between 259 K and 240 K. High selectivity to the upper few nanometres of the frozen solution – air interface is achieved by using electron yield near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. We present the NEXAFS spectrum of the hydrohalite.

fr: EnviDat: le portail de données environnementales

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

en: Data set on interfacial supercooling and the precipitation of hydrohalite in frozen NaCl solutions by X-ray absorption spectroscopy


en: swiss-geodata swisstopo geoinformation-software digital-elevation-model qgis-plugin digital-planning open-source cable-yarding seilaplan

en: View video on youtube!

en: Herunterladen des DHM von swisstopo Website

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. As an alternative to using the ‘Swiss Geo Downloader’ plugin, the DTM can be obtained directly from Swisstopo. In this tutorial we explain step by step how to download the necessary DTM from the Swisstopo Website, and how to use it in QGIS for the digital planning of a cable line using the plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to the elevation model on the swisstopo website: https://www.swisstopo.admin.ch/de/geodata/height/alti3d.html#technische_details

Link to the rope map website: https://seilaplan.wsl.ch

********************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Als Alternative zum Swiss Geo Downloader erklären wir in diesem Tutorial Schritt für Schritt, wie man das nötige Höhenmodell von der Swisstopo Webseite herunterladen und in QGIS zur Seillinienplanung verwenden kann.

Link zum Höhenmodell auf der swisstopo Webseite: https://www.swisstopo.admin.ch/de/geodata/height/alti3d.html#technische_details

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-software

display_name: geoinformation-software

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

swisstopo

display_name: swisstopo

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Seilaplan Tutorial: DTM download from swisstopo website


soil-respiration-exclosure-experiment

title_for_slug: soil-respiration-exclosure-experiment

en: soil-respiration subalpine ungulates grassland grazing

en: Soil respiration Switzerland

en:
ID: Fence number

Year	:Year of sampling

mean.CO2: soil respiration measured with PP-systems SRC-1 soil respriation chamber attached to a EGM-4 infrared gas analyser; units CO2 g m-2 h-1

Grassland: Grasslands where fences were errected. Note that on large grasslands (STAB, GRIM, MING) 2 pairs of fences were errected (2 in short, 2 in tall-grass vegetation), on small grasslands (DADA, MARG, BOTS) only one pair of fences was errected (1 short-grass; one-tallgrass vegetation)

Fence: Fence number; un-even numbers on short-grass vegetation (1,3,5,7,9,11,13,15,17), even numbers on tall-grass vegetation (2,4,6,8,10,12,14,16,18)

Vegetation:	1 = shortgrass vegetation, 2 = tall-grass vegetation (9 replicate fences on each vegetation type)

Treatment	: 1 = all herbivores grazing, 2 = large ungulates (red deer, chamois) excluded

format: XLS

en:
Location of data collection
The Swiss National Park (SNP) is located in the southeastern part of Switzerland, and covers an area of 170 km2, 50 km2 of which is forested, 33 km2 is occupied by alpine and 3 km2 by subalpine grasslands. Elevations range from 1350 to 3170 m a.s.l., and mean annual precipitation and temperature are 871 mm and 0.6°C measured at the Park’s weather station in Buffalora (1980 m a.s.l.) between 1960 and 2009 (MeteoSchweiz 2011). Founded in 1914, the SNP received minimal human disturbance for almost 100 years (no hunting, fishing, or camping, visitors are not allowed to leave the trails). Large (> 1 ha) homogeneous patches of short- and tall-grass vegetation characterize the subalpine grasslands. The average vegetation height of short-grass vegetation is 2 to 5 cm. Red fescue (Festuca rubra L.), quaking grass (Briza media L.) and common bent grass (Agrostis tenuis Sipthrob) are the predominating plant species in this vegetation type. Tussocks of evergreen sedge (Carex sempervirens Vill.) and mat grass (Nardus stricta L.) are predominant in the tall-grass vegetation, which averages 20 cm in vegetation height (Schütz and others 2006). Short-grass vegetation developed in areas where cattle and sheep rested (high nutrient input) during agricultural land-use (from 14th century until 1914); tall-grass vegetation developed in areas where cattle and sheep used to graze, but did not rest (Schütz and others 2003, 2006). Herbivores were shown to consume > 60% of the biomass in short-grass compared to < 20% in tall-grass vegetation (Schütz and others 2006). The herbivore community present in the SNP can be divided into four groups based on body size/weight: large [red deer (Cervus elaphus L.) and chamois (Rupricapra rupricapra L.); 30 - 150 kg], medium [marmot (Marmota marmota L.) and snow hare (Lepus timidus L.); 3 – 6 kg], and small vertebrate herbivores (small rodents: e.g. Clethrionomys spp., Microtus spp., Apodemus spp.; 30 – 100 g) as well as invertebrates (e.g. grasshoppers, caterpillars, cicadas, < 5 g).

Experimental design
We selected 18 subalpine grassland sites (9 short-grass, 9 tall-grass vegetation). The sites were spread across the entire park on dolomite parent material at altitudes of 1975 to 2300 meters. At each site we established an exclosure network (fences) in spring 2009 (early June), immediately after snowmelt. Each exclosure network consisted of a total of five 2 × 3 m sized plots that progressively excluded the different herbivores listed above (further labeled according to the herbivore guilds that had access to the respective plots “All”, “Marmot/Mice/Invertebrates”, “Mice/Invertebrates”, “Invertebrates”, “None”). The “All” treatment was thus accessible to all herbivores, was not fenced and was located at least 5 m away from a 2.1 m tall and 7 × 9 m main fence that enclosed the other four treatments. This fence was constructed of 10 × 10 cm wooden posts and electrical equestrian tape (AGRARO ECO, Landi, Bern, Switzerland; 20 mm width) mounted at 0.7 m, 0.95 m, 1.2 m, 1.5 m and 2.1 m above the ground that were connected to a solar charged battery (AGRARO Sunpower S250, Landi, Bern, Switzerland). We also mounted non-electrically charged equestrian tape at 0.5 m to help exclude deer and chamois, yet allow marmots and hares to enter safely. Within each main fenced area we randomly established four 2 × 3 m plots: (1) The “Marmot/Mice/Invertebrates” plot remained unfenced, thus, with the exception of red deer and chamois, all herbivores were able to access the plot, (2) The “Mice/Invertebrates” plot consisted of a 90 cm high electric sheep fence (AGRARO Weidezaunnetz ECO, Landi, Bern, Switzerland; mesh size 10 × 10 cm) connected to the solar panel and excluded all medium sized mammals (marmots, hares), but provided access for small mammals and invertebrates, (3) The “Invertebrates” plot provided access for invertebrates only and was surrounded by 1 m high metal mesh (Hortima AG, Hausen, Schweiz; mesh size 2 × 2 cm), (4) The “None” plot was surrounded by a 1 m tall mosquito net (Sala Ferramenta AG, Biasca, Switzerland; mesh size 1.5 × 2 mm) to exclude all herbivores. This plot was covered with a roof constructed of a wooden frame lined with mosquito mesh that was mounted on the wooden corner posts. We also treated this plot with a biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) when needed to remove insects that might have entered during data collection or that hatched from the soil.

!!! The here published data set only contains data for “All”, and “Marmot/Mice/Invertebrates” (= ungulates excluded) plots !!!

Data collection
In-situ soil CO2 emissions were measured with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA) on two randomly selected locations on one subplot within each of the 90 plots. For each measurement the soil chamber (15 cm high; 10 cm diameter) was placed on a permanently installed PVC collar (10 cm diameter) driven five centimeters into the soil at the beginning of the study (June 2009). The measurements were conducted between 0900 and 1700 hours every two weeks from early to early September 2009, 2010, 2011 and 2013. Freshly germinated plants growing within the PVC collars were removed prior to each measurement to avoid measuring plant respiration/photosynthesis. The two measurements collected per plot every two weeks were averaged.

Please acknowledge the funding of the study: funded by the Swiss National Science Foundation, SNF grant-no 31003A_122009/1 to Anita C. Risch, Martin Schütz and Flurin Filli

grassland

display_name: grassland

grazing

display_name: grazing

soil-respiration

display_name: soil-respiration

subalpine

display_name: subalpine

ungulates

display_name: ungulates

en: Soil respiration - exclosure experiment


en: pairwise-stand-comparisons forest-management biogeography soil-impacts biodiversity

media_type: CSV

en: Baseline data

format: CSV

en: headers

media_type: ascii, tab separated, also as excel table

en: Description of headers for data_wohlgemuth_etal_Neobiota_2022

en: references

media_type: XLS

en: Bibliography of all references cited in data_wohlgemuth_etal_Neobiota_2022.

en: Compiled data on the impacts of seven important NNTs (Acacia dealbata, Ailanthus altissima, Eucalyptus globulus, Prunus serotina, Pseudotsuga menziesii, Quercus rubra, Robinia pseudoacacia) on physical and chemical soil and biodiversity in Europe, and summarise commonalities and differences. A total of 107 publications considered, studies referred to biodiversity attributes and soil properties: 2804 lines and 30 rows.

biodiversity

display_name: biodiversity

biogeography

display_name: biogeography

forest-management

display_name: forest-management

pairwise-stand-comparisons

display_name: pairwise-stand-comparisons

soil-impacts

display_name: soil-impacts

en: Impact of non-native tree species in Europe on soil properties and biodiversity: a review


en: hazard-mapping satellite avalanche snow natural-hazard

en: SPOT6 Avalanche outlines 24 January 2018

media_type: SHP

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset.

format: SHP

mimetype: application/zip

en:
Outlines of 18'737 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 24 January 2018. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

Abstract.
Accurate and timely information on avalanche occurrence are key for avalanche warning, crisis management and avalanche documentation. Today such information is mainly available at isolated locations provided by observers in the field. The achieved reliability considering accuracy, completeness and reliability of the reported avalanche events is limited. In this study we present the spatial continuous mapping of a large avalanche period in January 2018 covering the majority of the Swiss Alps (12’500 km2).

We tested different satellite sensors available for rapid mapping during a first avalanche period. Based on these experiences, we tasked SPOT6/7 data for data acquisition to cover the second, much larger avalanche period. We manually mapped the outlines of 18’737 individual avalanche events, applying image enhancement techniques to analyze regions in cast shadow as well as brightly illuminated ones. The resulting dataset of mapped avalanche outlines, having a unique completeness and reliability, is evaluated to produce maps of avalanche occurrence and avalanche size. We validated the mapping of the avalanche outlines using photographs acquired from helicopters just after the avalanche period.

This study demonstrates the applicability of optical, very high spatial resolution satellite data to map an exceptional avalanche period with very high completeness, accuracy and reliability over a large region. The generated avalanche data is of great value to validate avalanche bulletins, complete existing avalanche databases and for research applications by enabling meaningful statistics on important avalanche parameters.

Koordinate System: CH1903+ LV95 LN02

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow

education

en: Education and science


maintainer: Maria Elvira Murazzi

en: forest-trees nanoplastic polystyrene 13c-labelling uptake

en: Nanoplastic in forests experiment

en:
Data embargoed until August 2022, and it will be provided upon request

-  excel file containing: two working sheets (leaf supply and root supply experiment) with a table with the values 13C-nanopolystyrene in the different tissues of the two forest tree species; graph showing the differences between controls and treatments of 13C-nanopolystyrene enrichment for each tissue of each forest tree species; ANOVA table showing significant values after having exposed the tree species to 13C-nanopolystyrene

en:
The fate of plastic in the environment is of global concern, because its production recently has
increased strongly and it accumulates in terrestrial and aquatic ecosystems. Although some knowledge on
its role in aquatic and terrestrial ecosystems was gained in the recent decade, hitherto very little is known
about the impact of micro and nanoplastics in forest ecosystems.

The aim of this pioneering project was to explore if nanoplastics are taken up by forest trees species
through leaves or roots. In greenhouse experiments, we exposed leaves or roots of seedling of two forest
trees species to solutions with highly 13C-labelled polystyrene nanoparticles (13C-nPS, 99 atom%) and
examined if they were incorporated in different above- and belowground tissues.

Treated part of the trees for both species showed significant 13C-enrichment, indicating that trees take up nanoparticles. However, the overall 13C signal strength in tissues that were not exposed to the 13C label remained low (Δδ13C<1‰) and was confined to a few seedlings, leaving it ambiguous whether nanoplastic transport occurs or not.

We acknowledge that the new method developed might be not sensitive enough to unequivocally detect
mechanisms of nanoplastic uptake and transport at environmentally realistic concentrations.

forest-trees

display_name: forest-trees

nanoplastic

display_name: nanoplastic

polystyrene

display_name: polystyrene

uptake

display_name: uptake

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Nanoplastics in forests: Exploring the effects of nanoplastics on forest soils and tree physiology (NanoPlast)


intratrait

maintainer: Christian Rixen

title_for_slug: intratrait

en: cold-adapted-plants climate-change elevation-range neighbour-interactions elevation-gradient plant-traits

media_type: R

en: Plant trait data along elevation gradients on mountains

en:
This data set was used to test whether species specialized to high elevations or with narrow elevational ranges show more conservative (i.e. less variable) trait responses across their elevational distribution, or in response to neighbours, than species from lower elevations or with wider elevational ranges. We did so by studying intraspecific trait variation of 66 species along 40 elevational gradients in four countries (Switzerland, Australia, New Zealand, China) in both hemispheres. As an indication of potential neighbour interactions that could drive trait variation, we also analysed plant species’ height ratio, its height relative to its nearest neighbour.
The following traits and parameters were measured and are available in this data set:
As an indication of plant stature, we measured vegetative and generative height, where vegetative height was distance from soil to highest vegetative leaf and generative height was distance to the highest point on the reproductive shoot. As a measure of reproductive investment, we noted the presence of flowers on the randomly chosen individuals (see below). As a measure of individual and genet basal area, we measured individual plant and patch diameters, in two dimensions (along the largest diameter and perpendicular to it). In clonal plant species, plant diameter was equivalent to an individual rosette, whereas patch diameter referred to the whole genet and could represent the size of a tuft, tussock or cushion. For genera with more singular growth forms (e.g., some Gentiana species) plant and patch diameter were the same. The two diameter measurements were made at right angles, allowing estimates of patch and plant areas to be calculated as an ellipse (i.e., area = 0.5 a 0.5 b Π). All traits were measured on ten randomly selected individuals per site. Flower count data was considered in a binary fashion on a per individual basis (because for some species individuals only produce one flower when flowering) so that the presence or absence of flower(s) was a nominal value between 0 and 10 for each species at each site. We then collected at least three leaves (up to 30 for small and light leaves) from each of the first three individuals selected from each species for determination of leaf dry matter content (LDMC) and specific leaf area (SLA). For calculations of LDMC and SLA, fresh leaves were scanned on a flatbed scanner to determine leaf area. Leaves were then weighed on a balance to a precision of +/- 0.001g, prior to being air dried and reweighed with a balance to a precision of +/- 0.0001g. LDMC was calculated by dividing dry leaf mass by fresh leaf mass. SLA was calculated by dividing leaf area by dry leaf mass. Additionally, within an area of 10 cm diameter around the target individual, we determined the tallest neighbouring species and measured its vegetative and generative height, and estimated the percent cover of the target species, other vegetation, rock, and bare soil.
For more details see Rixen et al. 2022, Journal of Ecology.

climate-change

display_name: climate-change

cold-adapted-plants

display_name: cold-adapted-plants

elevation-gradient

display_name: elevation-gradient

elevation-range

display_name: elevation-range

neighbour-interactions

display_name: neighbour-interactions

plant-traits

display_name: plant-traits

en: intratrait


en: planning-outcome forest-persistence urban-compactness spatial-modelling nature-conservation land-use-and-cover-change urban-morphology basic-services built-up-classification forest-gain topography urban-sprawl

media_type: .shp

en: Master plan Ubatuba (zones)

media_type: geotiff

en: Population density per pixel (change per year)

format: GeoTIFF

en: Master plan Ihabela (zones)

en: Increase in sanitation service

en: Urban persistence: Built-up 2005 = Built-up 2015

en: slope

en: Slope °

en: infill

en: New built-up pixels classified as infill

en: Native forest cover gains from 2005 to 2015

en: Increase in waste collection service

en:
Basic education in % per census sector (change per
year)

en: Native forest cover persistence from 2005 to 2015

en: Variables description

media_type: PDF

en: Table of content. Variables description, source, and other important information

en: Increase in clean water provision service

en: Increase in Normalized Difference Vegetation Index

en: Topographic Index Position (TPI)

en: Mean income in Reais (R$) per census sector (change per year)

en: Descricao dos dados em portiuguês

en: Portugues description

en: Permanent housing density increase

en: isolated

en: New built-up pixels classified as isolated

en: Human Development Index (HDI) per municipality (change per year)

en: Ecological-Economic Zoning (EEZ)

en: Axial

en: New built-up pixels classified as axial

en:
The present dataset is part of the published scientific paper entitled “The role of spatial planning in land change: An assessment of urban planning and nature conservation efficiency at the southeastern coast of Brazil” (Pierri Daunt, Inostroza and Hersperger, 2021). In this work, we evaluated the conformance of stated spatial planning goals and the outcomes in terms of urban compactness, basic services and housing provision, and nature conservation for different land-use strategies. We evaluate the 2005 Ecological-Economic Zoning (EEZ) and two municipal master plans from 2006 in a coastal region in São Paulo State, Brazil. We used Partial Least Squares Path Modelling (PLS-PM) to explain the relationship between the plan strategies and land-use change ten years after implementation in terms of urban compactness, basic services and housing increase, and nature conservation.

We acquired the data for the explanatory variables from different sources listed on Table 1. Since the model is spatially explicit, all input data were transformed to a 30 m resolution raster. Regarding the evaluated spatial plans, we acquired the zones limits from the São Paulo State Environmental Planning Division (CPLA-SP), Ilhabela and Ubatuba municipality.

1)	Land use and cover data: Urban persistence, Urban axial, Urban infill, Urban Isolates, Forest cover persistence, Forest cover gain, NDVI increase

We acquired two Landsat Collection 1 Higher-Level Surface Reflectance images distributed by the U.S. Geological Survey (USGS), covering the entire study area (paths 76 and 77, row 220, WRS-2 reference system, https://earthexplorer.usgs.gov/). We classified one image acquired by the Landsat 5 Thematic Mapper (TM) sensor on 2005-05-150, and one image from the Landsat 8 Operational Land Imager (OLI) sensor from 2015-08-15. We collected 100 samples for forest cover, 100 samples for built-up cover and 100 samples for other classes. We then classified these three classes of land cover at each image date using the Support Vector Machine (SVM) supervised algorithm (Hsu et al., 2003), using ENVI 5.0 software.

Land-use and land-cover changes from 2005 to 2015 were quantified using map algebra, by mathematically adding them together in pairs (10*LULC2015 + LULC2005). We reclassified the LULC data into forest gain (conversion of any 2005 LULC to forest cover in 2015); forest persistence (2005 forested pixels that remained forested in 2015); new built-up area (conversion of any 2005 LULC to built-up in 2015); and urban maintenance (2005 built-up pixels that remained built-up in 2015).

To describe the spatial configuration of the urban expansion, we classified the new built-up areas into axial, infill and isolated, following Inostroza et al. (2013) (For details, please refer to Supplementary Material I at the original publication).

The NDVI was obtained from the same source used for the LULC data. With the Google Engine platform, we used an annual average for the best pixels (without clouds) for 2005 and 2015, and we calculated the changes between dates. We used increases of > 0.2 NDVI to represent an improvement in forest quality.

2)	Federal Census data organization: Urban Basic Services and Housing indicator, socioeconomic and population:

The data used to infer the values of basic services provision, socioeconomic and population drivers was derived from the Brazilian National Census data (IBGE, 2000 and 2010). Population density, permanent housing unit density, mean income, basic education, and the percentage of houses receiving waste collection, sanitation and water provision services, called basic services in the context of this study, were calculated per 30 m pixel. The Human Development Index is only available at the municipality level. We attributed the HDI for the vector file with the municipality border, and we rasterized (30 m resolution) this file in QGIS. Annual rates of change were then calculated to allow comparability between LULC periods. To infer the BSH, we used only areas with an increase in permanent housing density and basic services provision (See Supplementary Material I at the original publication).

3)	Topographic drivers

To infer the values of the topographic driver, we used the slope data and the Topographic Index Position (TPI) based on the digital elevation model from SRTM (30 m resolution) produced by ALOS (freely available at eorc.jaxa.jp/ALOS/en/about/about_index.htm), and both variables were considered constant from 2005 to 2015 (See Supplementary Material I at the original publication).

basic-services

display_name: basic-services

en: Spatially explicit data to evaluate spatial planning outcomes in a coastal region in São Paulo State, Brazil


maintainer: Rebecca Mott

en: dischmex turbulent-sensible-heat-fluxes patchy-snow-covers eddy-covariance-measurements snow-patch

media_type: application/zip

en: Eddy-covariance measurement with an ultrasonic anemometer (DA-600, Kaijo-Denki) in 0.3 m on a daily basis.

format: ZIP

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 0.7 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 3.2 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.5 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.6 m.

en: Output explanation

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.3 m.

en: Gletschboden setup

media_type: image/png

en: Background map based on data © 2014/2016 swisstopo (JD100042)

format: PNG

mimetype: image/png

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.2 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 1.7 m on a daily basis.

en:
This dataset contains eddy-covariance measurements in the ablation period of 2014-2016. Measurements were taken from two turbulence towers over a long-lasting snow patch, which are 5 m apart from each other (2014 and 2015). The turbulence towers were equipped with two YOUNG ultrasonic anemometers mounted 0.7 m (in 2014) and 3.3 m (in 2015) above snow-free ground, two ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) mounted at 2.6 m (in 2014) and 2.2 m (in 2015) above snow-free ground and one anemometer (DA-600, Kaijo Denki) mounted at 0.3 m above snow surface.

The measurement setup changed in 2016 and includes a measurement above the snow-free ground in upwind direction (Swiss coordinates: 790191/176689). The measurement tower is equipped with one ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 3.3 m above the snow-free ground. Additionally, one measurement tower is installed above the long-Lasting snow patch and equipped with the same setup as 2015.

Turbulence data were sampled at a frequency of 20 Hz. The processing of the data to quality controlled fluxes has been done with the Biomicrometeorology flux software (Thomas et al., 2009). The program applies plausibility tests and a despiking test after Vickers and Mahrt (1997) on the measured data. The routine further applies a time-lag correction and considers the deployment (e.g. the sonic azimuth). A frequency response correction (Moore, 1986) is done and a three-dimensional rotation is performed. Finally, quality assurance/quality control (QA/QC) flags after Foken et al., (2004) are issued and fast Fourier transform power and co-spectra are calculated. The change in snow height is considered in the post-processing for every measurement day. The turbulence data were averaged to 30 minute intervals.

dischmex

display_name: dischmex

eddy-covariance-measurements

display_name: eddy-covariance-measurements

patchy-snow-covers

display_name: patchy-snow-covers

snow-patch

display_name: snow-patch

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: DISCHMEX - Impact of extreme land-surface heterogeneity on micrometeorology over spring snow-cover


en: relative-humidity climate-change meteo long-term swiss-forest-lab meteorology temperature precipitation wind-speed par

en: Site aerial photo (Novaggio)

media_type: image/jpeg

en: Site aerial photo from both Novaggio stations. Source: Google. 2016. Site aerial photo from both Novaggio stations. Retrieved November 15, 2016, from https://www.google.ch/maps

mimetype: image/jpeg

en: Field station data (NOF)

media_type: text/csv

en: Data file.

mimetype: text/csv

en: Forest station data (NOB)

en: Site photo of the forest station (NOB)

en: Site photo of the forest station from the side.

en: Site photo of the field station (NOF)

en: Site photo of the field station from the side.

en: Data plot of the field station (NOF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the forest station (NOB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Novaggio in Switzerland where one station is located within a natural deciduous forest stand (NOB) with Turkey oak (_Quercus cerris_; 70 yrs), sweet chestnut (_Castanea sativa_; 90 yrs) and silver birch (_Betula pendula_; 70 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Novaggio is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Novaggio, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


maintainer: Ionuț Iosifescu Enescu

en: map 1GB

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en: map 0.2GB

en: huge map 100GB

en: large map 10GB

en: map 0.5GB

en: map 2GB

en: Bulk Data Access

en: Link to the S3 bucket where all the data resources can be downloaded in bulk

en: map preview 0.5MB

en:
The attached data are some large GIS raster files (GeoTIFFs) made with Natural Earth data. Natural Earth is a free vector and raster map data @ naturalearthdata.com. The data used for creating these large files was the "Cross Blended Hypso with Shaded Relief and Water". Data was concatenated to achieve larger and larger files. Internal pyramids were created, in order that the files can be opened easily in a GIS software such as QGIS or by a (future) GIS data visualisation module integrated in EnviDat.

Made with Natural Earth. Free vector and raster map data @ naturalearthdata.com

gis

display_name: gis

large-files

display_name: large-files

natural-earth

display_name: natural-earth

qgis

display_name: qgis

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Large GIS raster data derived from Natural Earth Data (Cross Blended Hypso with Shaded Relief and Water)


maintainer: Jana von Freyberg

en: plant-water-uptake review endmember-mixing-models root-zone ecohydrology uncertainties stable-water-isotopes

en: Data set of MEE-20-04-264

en: The following two tables contain information about the data sources of the values reported in Table 1 and 2 in the paper “Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources” published in the journal ‘Methods in Ecology and Evolution’.

en: Data set of MEE-20-04-264 (CSV)

en: The following two tables contain information about the data sources of the values reported in Table 1 and 2 in the paper “Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources” published in the journal 'Methods in Ecology and Evolution'.

ecohydrology

display_name: ecohydrology

endmember-mixing-models

display_name: endmember-mixing-models

plant-water-uptake

display_name: plant-water-uptake

review

display_name: review

root-zone

display_name: root-zone

stable-water-isotopes

display_name: stable-water-isotopes

uncertainties

display_name: uncertainties

en: Data set of: Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources


maintainer: Matthias Haeni

en: climate-change long-term meteo swiss-forest-lab meteorology precipitation temperature par wind-speed relative-humidity

en: Forest station data (ALB)

en: Site aerial photo (Alpthal)

en: Site aerial photo from the Alpthal forest station. Source: Google. 2016. Site aerial photo from the Alpthal forest station. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (ALB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for one meteorological station in Alpthal in Switzerland which is located within a natural coniferous forest (ALB) with Norway spruce (_Picea abies_; 180-230 yrs) as dominant tree species. The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Alpthal is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

en: Alpthal, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: snow-precipitation complex-terrain orographic-precipitation precipitation-variability cosmo-wrf

en: Snow depth maps over Dischma valley for 26 January 2016 and 9 March 2016 and snow depth differences between the two dates.

en: StationData

en:
The data presented here corresponds to the publication "Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain" (Gerber et al., 2018a), which investigates the precipitation variability of snow precipitation in the central northern part of the Grisons (CH) and the publication "The importance of near-surface winter precipitation processes in complex alpine terrain" (Gerber et al., 2018b). The dataset contains:

* WRFsimulations: WRF simulation output for simulations with 4x (14x) terrain smoothing with an output timestep of 30 min/5 min and horizontal grid spacings of 1350 m, 450 m, 150 m and 50 m (currently: data available upon request).
* StationData: Meteorological station data of 18 meteorological stations in the central northern part of the Grisons with 30 minute resolution for the period 1 January 2016 till 1 May 2016.
* ADS80data: Photogrammetrically determined snow depth distribution data over the Dischma valley for the 26 January 2016 and 9 March 2016. Snow heights are corrected for buildings, vegetation (> 1m), outliers, and pixles, which are obivously snow-free on the pictures (Bühler et al., 2015). In addition the snow depth differences (snow depth on 9 March 2016 minus snow depth on 26 January 2016) are provided.

For more details about the simulation and observation data, see Gerber et al., 2018 and Gerber and Sharma (2018).

Publications:

Bühler, Y., Marty, M., Egli, L., Veitinger, J., Jonas, T., Thee, P., and Ginzler, C.: Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9, 229–243, doi:10.5194/tc-9-229-2015, 2015.

Gerber, F., Besic, N., Sharma, V., Mott, R., Daniels, M., Gabella, M., Berne, A., Germann, U., and Lehning, M.: Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain, The Cryosphere, 12, 3137–3160, doi:10.5194/tc-12-3137-2018, 2018.

Gerber, F., Mott, R. and Lehning, M.: The importance of near-surface winter precipitation processes in complex alpine terrain, Journal of Hydrometeorology, accepted, 2018.

Gerber, F., and Sharma, V.: Running COSMO-WRF on very-high resolution over complex terrain. Laboratory of Cryospheric Sciences CRYOS, École Polytechnique Fédérale de Lausanne EPFL, Lausanne, Switzerland. doi:10.16904/envidat.35, 2018.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

orographic-precipitation

display_name: orographic-precipitation

precipitation-variability

display_name: precipitation-variability

snow-precipitation

display_name: snow-precipitation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: DISCHMEX - High-resolution WRF simulations in complex alpine terrain and station measurements


snow-depth-mapping

maintainer: Mauro Marty

title_for_slug: snow-depth-mapping

en: image-matching dsm snow-hydrology aerial-imagery snow-water-equivalent avalanche snow-depth

en: Snow depth map 20160420

en: Snow depth map 20130415

en: Snow depth map generated from ADS 80 imagery (CIR). GSD of imagery = 0.25 m

en: Snow depth map 20160126

en:
Snow depth map generated from ADS 100 imagery (CIR). GSD of imagery = 0.16 m
Because of very diffuse light conditions at time of image acquisition the quality of the resulting snow depth values are in some regions quite poor.

en: Snow depth map 20160309

en: Snow depth map 20100416

en: Snow depth map 20140417

en: Snow depth map generated from ADS 100 imagery (CIR). GSD of imagery = 0.18 m

en: Snow depth map 20150415

en: Snow depth map 20120320

en:
The available datasets are snow depth maps with a spatial resolution of 2m generated from image matching of ADS 80/100 data. Image acquisition took place at peak of winter (time when the thickest snowpack is expected). The snow depth maps are the difference of a summer DSM from the winter DSM of the corresponding date . The summer DSM used is a product of image matching of ADS 80 data from summer 2013. In the available products buildings, vegetation and outliers were masked (set to NoData).
For the elimination of buildings the TLM layer (swisstopo) was used, because this layer might not represent exactly the
state of infrastructure at time of image acquisition, it is possible that mainly in dense settlement some buildings were not successfully masked. For the relevant area above treeline the masking of buildings showed good results. Vegetation got masked for a height above ground > 1m and was detected in a combination of summer and winter data sets. As Outliers were considered unrealistic snow depths caused by a failure of the image matching algorithm. Snow depths > 15m and smaller than < -15m were classified as outliers. Negative snow depth were kept, because of an uncertainty in image orientation accuracy. It is expected that in regions with negative snow depth also positive snow depth are underestimated by the same amount, which means that an estimation of snow volume should be carried out summing up the absolute values of snow depth (also the negative ones). For volume estimation in small regions the user has to take into account, that orientation accuracy of the images is roughly around 1-2 GSD (30cm), which propagates directly to the snow depth product. Areas which are not covered by snow got assigned a value of 0 as snow depth.

The work is published in:

Bühler, Y.; Marty, M.; Egli, L.; Veitinger, J.; Jonas, T.; Thee, P.; Ginzler, C., (2015). Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9 (1), 229-243. doi: 10.5194/tc-9-229-2015

aerial-imagery

display_name: aerial-imagery

avalanche

display_name: avalanche

dsm

display_name: dsm

image-matching

display_name: image-matching

snow-depth

display_name: snow-depth

snow-hydrology

display_name: snow-hydrology

snow-water-equivalent

display_name: snow-water-equivalent

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Michael Lehning

en: snowpack terrestrial-laser-scanning winter-tourism snow-farming snow snow-conservation

en: HS Fluela spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903

en: Fluela .sno

media_type: SNO

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Flüela heap

en: HS Martell autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en: Fluela .smet

media_type: SMET

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Windtunnel and DAV.

en: HS Martell spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en: Martell .smet

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Hintermartell.

en: HS Fluela autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903
Nodata: -9999

en: Martell .sno

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Martell heap

en:
Two data sets obtained for snow farming projects (Fluela, Davos, CH and Martell, IT) in 2015.

The data set contains for each site:

* 10 cm GIS raster of snow depth calculated from terrestrial laserscanning surveys (TLS) in the end of winter season (April/May)

* 10 cm GIS raster of snow depth calculated from TLS in the end of summer season (October)

Input files for SNOWPACK model:

* .sno: snow profile at the end of winter

* .smet: meteorological data measured by weather stations in the area

For more details see Grünewald, T., Lehning, M., and Wolfsperger, F.: Snow farming: Conserving snow over the summer season, The Cryosphere Discuss., https://doi.org/10.5194/tc-2017-93, in review, 2017.

snow

display_name: snow

snow-conservation

display_name: snow-conservation

snow-farming

display_name: snow-farming

snowpack

display_name: snowpack

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

winter-tourism

display_name: winter-tourism

education

en: Education and science

en: Snowfarming data set Davos and Martell 2015


maintainer: Henning Löwe

en: grain-shape discrete-element-modelling fast-sintering granular-snow angle-of-repose

media_type: text/plain

en: Angle of repose and 3D CT images

en:
5 Snow types were examined and glass beads as a cohesion-less reference, named as follows:

RG: rounded grains (sieved with 0.7 - 1.4 mm)

FC: faceted grains (1.4 - 2 mm)

FCS: small faceted grains (0.7 - 1.4 mm)

IB: ice beads (4 mm)

IBS: small ice beads (2 - 2.2 mm)

GB: glass beads(2 mm)

en:
Angle of repose experiments were performed with different snow types at temperatures between -2 and -40°C. They were used to examine granular snow dynamics on the grain-scale with focus on the role of grain shape and cohesion. The angle of repose was observed by sieving snow onto a round, freestanding base until a stationary heap was formed.

This dataset consists of 1) the images of the experimental heaps that were taken to determine the angle of repose, 2) one binary 3D micro computed tomography image of each snow type. The CT images were taken with the SLF micro-CT40 to characterize snow properties and grain shape.

The experiments with natural snow types (rounded and faceted grains) and spherical model snow allowed for an examination of the differences in granular properties between natural grain shapes and spherical particles in view of Discrete Element Modelling. With the chosen temperatures, the effect of sintering could be observed that increases the angle of repose with increasing temperature.

angle-of-repose

display_name: angle-of-repose

discrete-element-modelling

display_name: discrete-element-modelling

fast-sintering

display_name: fast-sintering

grain-shape

display_name: grain-shape

granular-snow

display_name: granular-snow

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Angle of repose experiments with natural and spherical snow


en: surface-mass-balance antarctica cryowrf reproducibility blowing-snow

media_type: ZIP

en: Python scripts to reproduces figures in Gerber et al., 2022, submitted.

en: Namelist and input files and information to run the WRF and CRYOWRF simulations used in the paper.

en: Static input data from the WRF simulations (used in the python scripts in Scripts_Reproducibility).

en: Processed CRYOWRF output used for the analysis and the figures in the paper.

en: Processed WRF output (run with Noah-MP land surface model) used for the analysis and the figures in the paper.

en:
This dataset contains data and scripts for "CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB" (Gerber et al., submitted).

* Simulation_setup: Namelists and input information to run the simulation. Some input files need to be downloaded from Sharma et a., 2021.
* Static_input: Static topography input file of WRF (geo_em.d01).
* WRF_27km_NoahMP: Preprocessed WRF output of the simulation run with the WRF using the surface parameterization Noah-MP to reproduce the figures and results in the paper.
* WRF_27km_CRYOWRF: Preprocessed WRF output of the simulation run with CRYOWRF to reproduce the figures and results in the paper.
* Scripts_Reproducibility: Python scripts to reproduce the figures and results in the paper.

Note:

* To run some of the scripts Atmospheric Weather station data needs to be prepared using Gerber and Lehning, 2022.
* AWS data is not provided and needs to be downloaded from the corresponding databases. Please make sure to comply with the respective terms and conditions.

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

cryowrf

display_name: cryowrf

reproducibility

display_name: reproducibility

surface-mass-balance

display_name: surface-mass-balance

en: Reproducibility dataset for CRYOWRF validation


vegetation-height-model-nfi

maintainer: Christian Ginzler

title_for_slug: vegetation-height-model-nfi

en: 3d vegetation-height-model forest photogrammety point-cloud

en: 2016 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2016' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2011 to 2016.

en: 2012 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2012' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2007 to 2012.

en: 2019 Vegetation Height Model NFI (current)

en:
Data 'Vegetation Height Model NFI 2019' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2013 to 2019.

en: Countrywide Stereo-Image Matching for Updating Digital Surface Models in the Framework of the Swiss National Forest Inventory

en: 2015 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2015' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2010 to 2015.

en: Thumbnail

en:
A national vegetation height model was calculated for Switzerland using digital aerial images.
We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution
(1 × 1 m and 0.5 x 0.5 m). The DSM was then normalized to obtain the actual
vegetation heights using a digital terrain model (DTM)
based on laser data with the buildings masked out, and to
produce a vegetation height model (VHM). Such a model
will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very
high level of detail. For covering the whole of Switzerland,
we use summer aerial images from six years.

Latest version is from 2019.

forest

display_name: forest

photogrammety

display_name: photogrammety

point-cloud

display_name: point-cloud

vegetation-height-model

display_name: vegetation-height-model

education

en: Education and science

en: Vegetation Height Model NFI


en: alptal time-series switzerland studibach groundwater

en:
Groundwater time series of the monitoring network in the Studibach (C7) catchment, Alptal, Switzerland published in
Rinderer M., van Meerveld I, McGlynn B. (2019): From points to patterns – Assessing runoff source area dynamics and hydrological connectivity using time series clustering. Water Resources Research, doi: 2018WR023886R

en: Groundwater time series between 2010 and 2014 of the distributed monitoring system in the Studibach (C7), Alptal, Switzerland. Data published in Rinderer M., van Meerveld I, McGlynn B. (2019): From points to patterns – Assessing runoff source area dynamics and hydrological connectivity using time series clustering. Water Resources Research, doi: 2018WR023886R

alptal

display_name: alptal

groundwater

display_name: groundwater

studibach

display_name: studibach

switzerland

display_name: switzerland

time-series

display_name: time-series

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Groundwater time series Studibach (Rinderer et al., 2019, WRR)


snow-drift-station-snow-and-air-data

maintainer: Benjamin Walter

title_for_slug: snow-drift-station-snow-and-air-data

en: snow-temperature snow-depth raclets snow temperature snow-height

en: Snow Surface Temperature

en: The snow surface temperature (°C) was measured with a Campbell SI-111 at 0.7 m above ground. The time is given in UTC+1.

en: Air Temperature

en: The air temperature (°C) was measured with a Campbell CS-215 which was mounted at a height of 2.2 m above ground. The time is given in UTC+1.

en: Relative Humidity

en: The relative humidity (%) was measured with a Campbell CS-215 at a height of 2.2 m above ground. The time is given in UTC+1.

en: Snow Depth

en: The snow depth (cm) was measured with a Lufft SHM-31 which was mounted at 1.7 m above ground. The time is given in UTC+1.

en: Snow and air data was monitored at Gotschnagrat (LON: 46.859 LAT: 9.849) by an infrarot radiometer (Campbell SI-111) for snow temperature (°C), a snow height sensor (Lufft SHM-31) for snow height change (cm) and a temperature and humidity sensor (Campbell CS-215) for air temperature (°C) and relative humidity (%). No filter was applied to the sensors and the smapling frequency was 1 Hz.

raclets

display_name: raclets

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-height

display_name: snow-height

snow-temperature

display_name: snow-temperature

temperature

display_name: temperature

en: Snow Drift Station - Snow and Air Data


en: digital-planning digital-elevation-model seilaplan open-source qgis-plugin swiss-geodata swiss-geo-downloader geoinformation-system cable-yarding

en: Herunterladen des DHM mit SwissGeoDownloader

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. The plugin ‘Swiss Geo Downloader’, which is available for the open source geoinformation software QGIS, allows freely available Swiss geodata to be downloaded and displayed directly within QGIS. It was developed in 2021 by Patricia Moll in collaboration with the Swiss Federal Institute for Forest, Snow and Landscape Research WSL. In this tutorial we describe how to download the high accuracy elevation model ‘swissALTI3D’ with the help of the ‘Swiss Geo Downloader’ and how to use it for digital planning of a cable line with the plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to the Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link to Seilaplan website: https://seilaplan.wsl.ch

*********************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Das Plugin Swiss Geo Downloader, welches für das Open Source Geoinformationssystem QGIS zur Verfügung steht, ermöglicht frei verfügbare Schweizer Geodaten direkt innerhalb von QGIS herunterzuladen und anzuzeigen. Es wurde 2021 von Patricia Moll in Zusammenarbeit mit der eidgenössischen Forschungsanstalt Wald, Schnee und Landschaft WSL entwickelt. In diesem Tutorial beschreiben wir, wie man mit Hilfe des Swiss Geo Downloaders das hochgenaue Höhenmodell swissALTI3D herunterladen und für die Seillinienplanung mit dem Plugin Seilaplan verwenden kann.

Link zum Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link zur Seilaplan-Webseite: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geo-downloader

display_name: swiss-geo-downloader

swiss-geodata

display_name: swiss-geodata

education

en: Education and science

en: Seilaplan Tutorial: DTM download with SwissGeoDownloader


maintainer: Vanessa Burg

en: review manure switzerland bioenergy biogas

en: Biogas from animal manure in Switzerland: energy potential, technology development and resource mobilization

en: Aim of this white paper is to provide decision-makers, administrations and stakeholders with the most current research findings in order to promote the optimal use of bioenergy from manure in the Swiss energy transition. For this purpose, the results of the Swiss competence center for bioenergy research - SCCER BIOSWEET - are summarized and presented in a broader context. If nothing else is mentioned, the results refer to Switzerland and in case of the feedstock to the domestic biomass potentials.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


present-weather-sensor-klosters

maintainer: Maxime Hervo

title_for_slug: present-weather-sensor-klosters

en: visibility sensor weather precipitation raclets

en: Present Weather Sensor Klosters

media_type: mat

en: Present Weather sensor measuring visibility and weather type installed at Klosters.

en: A present weather sensor (Vaisala PWD22) was deployed in Klosters (LON: 9.880413, LAT: 46.869019) for weather observation, combining the functions of a forwardscatter visibility meter and a present weather sensor. Besides measuring ambient light, it detects the intensity as well as the amount of both liquid and solid precipitation. More information can be found in the [User's Manual](ftp://ftp.cmdl.noaa.gov/aerosol/doc/manuals/PWD22_Manual.pdf).

precipitation

display_name: precipitation

raclets

display_name: raclets

sensor

display_name: sensor

visibility

display_name: visibility

weather

display_name: weather


en: rutschblock snowpack-simulation snow-stratigraphy snowpack snow-profiles snow-instability failure-layer

en: Simulated snow profiles

media_type: .csv

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en: ReadMe

en: ReadMe file explaining data structure and content

en: Observed snow profiles

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en: DAV data set: Properties of observed snow profiles and simulated failure layers

media_type: CSV

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-instability

display_name: snow-instability

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack

display_name: snowpack

snowpack-simulation

display_name: snowpack-simulation

en: Observed and simulated snow profile data


weather-station-klosters

title_for_slug: weather-station-klosters

en: precipitation raclets wind klosters weather temperature

en: Weather Station Klosters

en: All in one weather station measuring temperature (°C), humidity (%), wind (m s‾ ¹) and precipitation type. The time format is: number of days from January 0, 0000, UTC.

en: A weather station (Lufft WS600) measured meteorological parameters at Klosters (LON: 9.880413, LAT: 46.869019). Detailed information on the specifications can be found [here](https://www.lufft.com/products/compact-weather-sensors-293/ws600-umb-smart-weather-sensor-1832/productAction/outputAsPdf/).

klosters

display_name: klosters

temperature

display_name: temperature

wind

display_name: wind

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Esther R. Frei

en: climate-change forest treeline swiss-alps g-tree

en: climate data G-TREE experiment, Davos, Switzerland

en: GTREE Website

en:
G-TREE is a global research network composed of 40 arctic and alpine researchers from around the world. This summer, our field experiment will be established at numerous sites across Canada, France, Norway, Spain, the United States, and Venezuela. Other sites are being developed in Russia, Scotland, and Sweden.

The Stillberg research area is located in the Eastern Swiss Alps near Davos, Switzerland. The site has been used for several long-term monitoring as well as experimental studies for the last four decades. Our G-TREE experiment consists of a lowest site located in a subalpine Larch-Spruce forest (Larici-Picetum) dominated by Larix decidua and Picea abies (1930 m a.s.l.), a transition zone site dominated by alpine shrubs (2100 m a.s.l.), and an uppermost site in an alpine meadow with some dwarf shrubs (2390 m a.s.l.).

climate-change

display_name: climate-change

forest

display_name: forest

g-tree

display_name: g-tree

swiss-alps

display_name: swiss-alps

treeline

display_name: treeline

en: G-TREE: Global Treeline Range Expansion Experiment Davos, Switzerland


en:
This dataset contains the statistics on the number of avalanche fatalities per **calendar year** in Switzerland. The data collection commences with the beginning of the year 1937. After the completion of a hydrological year, which is the standard way avalanche fatalities are summarized in Switzerland and ends on the 30th of September, the new data is appended to the existing dataset.
If you require annual statistics per hydrological year, please download the data from here: [https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936]

The following information is contained (by column and column title):
 - year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste, away from open and secured ski runs)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)

The definitions for these four categories, as described in the guidelines to the avalanche accident database are:

tour:
activities include back-country ski, snowboard or snow-shoe touring

offpiste:
access from ski area, generally from the top of a skilift with short hiking distances

transportation.corridors (Techel et al., 2016):
people travelling or recreating on open or temporarily closed transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)

buildings (Techel et al., 2016):
people inside or just outside buildings, and workers on high alpine building sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

en: Number of avalanche fatalities per calendar year in Switzerland since 1937


wind-lidar-davos-wolfgang

title_for_slug: wind-lidar-davos-wolfgang

en: wind wolfgangpass raclets profiles lidar

en: Wind LIDAR data Wolfgang

en: A Leosphere WidCube 100S was deployed at Davos Wolfang, measuring wind profiles as well as performing PPI and RHI scans. Time format is in UTC with highest time resolution of 5 seconds.

en: Scanning wind Lidar from Meteoswiss was installed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577) and measured from 200 m above ground to 8100 m. The time resolution is up to 5 seconds. The Lidar was measuring wind profiles but also performed plan position indicator (PPI) and range height indicator (RHI) scans.

lidar

display_name: lidar

profiles

display_name: profiles

raclets

display_name: raclets

wolfgangpass

display_name: wolfgangpass

en: Wind LIDAR Davos Wolfgang