maintainer: Joan Casanelles Abella

en: chelostoma-florisomne plant-pollinator-interactions osmia-bicornis hylaeus-communis osmia-cornuta antwerp cavity-nesting-bees trap-nest tartu poznan paris urban-ecology zurich dna-metabarcoding

en: Larval food composition

en: Explanation data variables

en: Urbanization poses threats and opportunities for the biodiversity of wild bees. A main gap relates to the food preferences of wild bees in urban ecosystems, which usually harbour large numbers of plant species, particularly at the larval stage. This data sets describes the larval food of four wild bee species (i.e. Chelostoma florisomne, Hylaeus communis, Osmica bicornis and Osmia cornuta) and three genera (i.e. Chelostoma sp., Hylaeus sp, and Osmia sp.) common in urban areas in five different European cities (i.e. Antwerp, Paris, Poznan, Tartu and Zurich). This data results from a European-level study aimed at understanding the effects of urbanization on biodiversity across different cities and citiscapes, and a Swiss project aimed at understanding the effects of urban ecosystems in wild bee feeding behaviour. Wild bees were sampled using standardized trap-nests in 80 sites (32 in Zurich and 12 in each of the remaining cities), selected following a double gradient of available habitat at local and landscape scales. Larval pollen was obtained from the bee nests and identified using DNA metabarconding. The data provides the plant composition at the species or genus level of the different bee nests of the studied species in the studied sites of the five European cities. For Hylaeus communis, this is the first study in reporting larval food composition.

antwerp

display_name: antwerp

cavity-nesting-bees

display_name: cavity-nesting-bees

chelostoma-florisomne

display_name: chelostoma-florisomne

dna-metabarcoding

display_name: dna-metabarcoding

hylaeus-communis

display_name: hylaeus-communis

osmia-bicornis

display_name: osmia-bicornis

osmia-cornuta

display_name: osmia-cornuta

paris

display_name: paris

plant-pollinator-interactions

display_name: plant-pollinator-interactions

poznan

display_name: poznan

tartu

display_name: tartu

trap-nest

display_name: trap-nest

urban-ecology

display_name: urban-ecology

zurich

display_name: zurich

en: Larval food composition of four wild bee species in five European cities


maintainer: EnviDat Support

en: reservoirs water-demand water-scarcity climate-change water-supply

state: active

type: dataset

en: Water demand version 2 (corrected version)

media_type: application/zip

format: ZIP

mimetype: application/zip

en: Reservoir volumes

en: Reservoir volume for the 307 medium-sized catchments for different storage categories: natural lakes, artificial reservoirs, reservoirs for artificial snow production, drinking water reservoirs, and usable volumes of natural lakes. Unit: Mio m³. One column per catchment (see shapefile).

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of 307 catchments for which estimates of water supply, demand, and reservoir volumes are provided. The OBJECTID entry corresponds to the catchment ID which is used as a reference in the other datasets provided.

en: Water supply

en: Simulated discharge series for a reference period 1981-2010 and till the end of the century. Data are provided for 39 climate model chains and a control run based on the observed meteorology. Data are provided at daily resolution (mm/d).

en: Water demand (deprecated)

en:
Warning: please use the corrected version 2, since this file contains errors for certain categories such as Livestock, Industry or Houshold.

Water demand estimates for the 307 medium-sized catchments for different categories for current and future conditions. One text file is provided per demand category. One column corresponds to one catchment (IDs compare to shapefile), The data are provided at monthly resolution in mm/d and can be converted to volumes by using the catchment area. E.g.
Q[mm/d] * catchment area [m²] /1000 = Q[m³/d]
or to obtain discharge in m³/s
Q[mm/d] * catchment area [m²]/1000/24/3600 = Q [m³/s].
Future irrigation and hydropower water demand are provided per climate model chain.

en:
The dataset Hydro-CH2018 reservoirs provides estimates of current and future water supply, water demand, and storage volumes for 307 medium-sized catchments in Switzerland.
Water supply for current (1981-2010) and future (2070-2099) climate conditions was simulated using the hydrological model PREVAH. For modeling current water supply, observed meteorological time series were used as input, while simulated meteorological time series derived from 39 model chains of the CH2018 initiative were used as an input for simulating future climate conditions.

Water demand was estimated for six categories:

- 1) Drinking water (households and tourism),
- 2) industry (second and third sector),
- 3) artificial snow production,
- 4) agriculture (irrigation and livestock feeding),
- 5) ecology (residual flows), and
- 6) hydropower.

Future estimates consider changes in demand related to population growth and changes in the hydrological conditions.
Storage volumes are provided for natural lakes (storage capacities and usable volumes), artificial reservoirs, reservoirs for artificial snow production, and drinking reservoirs.

A detailed description of the simulation and estimation procedures can be found in

*  Brunner, M.I., Björnsen Gurung, A., Zappa, M., Zekollari, H., Farinotti, D., Stähli, M., 2019. Present and future water scarcity in Switzerland: Potential for alleviation through reservoirs and lakes. Sci. Total Environ. 666, 1033–1047. https://doi.org/10.1016/j.scitotenv.2019.02.169.

This dataset contains the following information:

1.	Shapefile with the 307 medium-sized Swiss catchments.
2.   Textfiles with the water supply simulations for the control run and the 39 climate model chains (one file per chain) at daily resolution for the 307 catchments.
3.	Textfiles with the current and future demand estimates per category at monthly resolution for the 307 catchments.
4.	Textfiles with the storage volumes per category and catchment.

climate-change

display_name: climate-change

reservoirs

display_name: reservoirs

water-demand

display_name: water-demand

water-scarcity

display_name: water-scarcity

water-supply

display_name: water-supply

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Hydro-CH2018 reservoirs


en: snow graubunden climate-change switzerland alpine3d-simulations

en: Simulation data

en: Reference data as well as the 2050 and 2099 scenarios for ARPEGE and ETHZ other RCMs available on demand)

format: SERVICE

en: Configuration file

media_type: ini

en:
This is the simulation dataset from _"Response of snow cover and runoff to climate change in high Alpine catchments of Eastern Switzerland"_, M. Bavay, T. Grünewald, M. Lehning, Advances in Water Resources 55, 4-16, 2013

A model study on the impact of climate change on snow cover and runoff has been conducted for the Swiss Canton of Graubünden. The model Alpine3D has been forced with the data from 35 Automatic Weather Stations in order to investigate snow and runoff dynamics for the current climate. The data set has then been modified to reflect climate change as predicted for the 2021-2050 and 2070-2095 periods from an ensemble of regional climate models.

The predicted changes in snow cover will be moderate for 2021-2050 and become drastic in the second half of the century. Towards the end of the century the snow cover changes will roughly be equivalent to an elevation shift of 800 m. Seasonal snow water equivalents will decrease by one to two thirds and snow seasons will be shortened by five to nine weeks in 2095.

Small, higher elevation catchments will show more winter runoff, earlier spring melt peaks and reduced summer runoff. Where glacierized areas exist, the transitional increase in glacier melt will initially offset losses from snow melt. Larger catchments, which reach lower elevations will show much smaller changes since they are already dominated by summer precipitation.

graubunden

display_name: graubunden

snow

display_name: snow

switzerland

display_name: switzerland

en: Alpine3D simulations of future climate scenarios for Graubunden


maintainer: Yohann Chauvier

en: independent-dataset random-stratified-sampling point-process-model survey-effort target-group covariate-correction cluster plant-species background-data environmental-stratification

media_type: ZIP

en: Non-copyright data, scripts, diversity outputs

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models


sensitivity-of-modeled-snow-instability

maintainer: Bettina Richter

title_for_slug: sensitivity-of-modeled-snow-instability

en: numerical-avalanche-forecasting snowpack global-sensitivity-analysis snow-instability snow-cover-modeling

en: Reference run

en: Reference run for the sensitivity analysis at Weissfluhjoch field site for winter season 2016-2017. Meteorological data from the automatic weather stations are used. No biases were introduced to the input data.

en: Case SL

en: Extracted output data for case SL. Here biases were introduced to meteorological input data during the period of slab formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Case ALL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the whole simulation period. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Manually observed snow profiles

en: Manually observed snow profiles at Weissfluhjoch field site for winter season 2016-2017, including layer depth, hand hardness, grain size and grain shape for each layer.

en: Case WL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the period of weak layer formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: We investigated the sensitivity of modeled snow instability to meteorological input data using SNOWPACK. We therefore used input data from the automatic weather station at the Weissfluhjoch field site for the year 2016-2017. We investigated three scenarios and performed 14'000 simulations for each scenario. The dataset contains extracted output data from modeled SNOWPACK simulations, including setup files to reproduce the simulations. For further information read the README file.

global-sensitivity-analysis

display_name: global-sensitivity-analysis

numerical-avalanche-forecasting

display_name: numerical-avalanche-forecasting

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

snowpack

display_name: snowpack

en: Sensitivity of modeled snow instability


maintainer: Henning Löwe

en: grain-shape granular-snow fast-sintering discrete-element-modelling angle-of-repose

en: Angle of repose and 3D CT images

en:
5 Snow types were examined and glass beads as a cohesion-less reference, named as follows:

RG: rounded grains (sieved with 0.7 - 1.4 mm)

FC: faceted grains (1.4 - 2 mm)

FCS: small faceted grains (0.7 - 1.4 mm)

IB: ice beads (4 mm)

IBS: small ice beads (2 - 2.2 mm)

GB: glass beads(2 mm)

media_type: text/plain

format: TXT

mimetype: text/plain

en:
Angle of repose experiments were performed with different snow types at temperatures between -2 and -40°C. They were used to examine granular snow dynamics on the grain-scale with focus on the role of grain shape and cohesion. The angle of repose was observed by sieving snow onto a round, freestanding base until a stationary heap was formed.

This dataset consists of 1) the images of the experimental heaps that were taken to determine the angle of repose, 2) one binary 3D micro computed tomography image of each snow type. The CT images were taken with the SLF micro-CT40 to characterize snow properties and grain shape.

The experiments with natural snow types (rounded and faceted grains) and spherical model snow allowed for an examination of the differences in granular properties between natural grain shapes and spherical particles in view of Discrete Element Modelling. With the chosen temperatures, the effect of sintering could be observed that increases the angle of repose with increasing temperature.

angle-of-repose

display_name: angle-of-repose

discrete-element-modelling

display_name: discrete-element-modelling

fast-sintering

display_name: fast-sintering

grain-shape

display_name: grain-shape

granular-snow

display_name: granular-snow

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Angle of repose experiments with natural and spherical snow


en: specific-surface-area microct snow intercomparison icecube

en: Statistics of samples

media_type: XLSX

format: XLS

en: Grain survey of snow particles

en: tbd

en: IceCube and MicroCT data

en: TARTES simulations

media_type: ipynb

en: Jupyter notebook with TARTES simulations.

en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

snow

display_name: snow

specific-surface-area

display_name: specific-surface-area


maintainer: Elisabeth Hafner

en: snow natural-hazard avalanche hazard-mapping satellite

en: SPOT6 Avalanche Outlines 16 January 2019

media_type: SHP

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset and within the limitations of the dataset described in the publications.

format: SHP

en:
Outlines of 6'041 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 16 January 2019. The dataset was acquired following a period with very high avalanche danger. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping16012019.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

The data was comprehensivly validated in a subset area in

Hafner, E.D.; Techel, F.; Leinss, S.; Bühler, Y., 2021: Mapping avalanches with satellites - evaluation of performance and completeness. Cryosphere, 15, 2: 983-1004. doi: 10.5194/tc-15-983-2021

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

en: SPOT6 Avalanche outlines 16 January 2019


en: rutschblock snow-stratigraphy snow-profiles snowpack-simulation snowpack failure-layer snow-instability

en: Observed snow profiles

media_type: .csv

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en: Simulated snow profiles

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en: DAV data set: Properties of observed snow profiles and simulated failure layers

media_type: CSV

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

format: CSV

en: ReadMe

en: ReadMe file explaining data structure and content

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack-simulation

display_name: snowpack-simulation

education

en: Education and science

en: Observed and simulated snow profile data


en: airborne-laser-scanning snow-distribution snow-depth canopy-height forest-structure

en: Canopy height maps

en: Canopy height maps of each of the three field areas Davos, Engadine and Grand Mesa

en: Terrain elevation maps

en: Digital elevation model computed from snow-off flights for each of the field areas Davos, Engadine and Grand Mesa

en: Readme

en: Snow depth maps

en: Snow depth maps from two snow-on flights at each of the three field areas Davos (March 20th and 31st 2017), Engadien (March 20th and 31st, 2017) and Grand Mesa (February 8th and 16th, 2017)

en:
This dataset includes snow depth, canopy height and terrain elevation maps of forest stands in the Grisons (CH) and at Grand Mesa (CO,USA) derived from airborne lidar. Data were acquired i) within a pilot mission of NASA's Airborne Snow Observatory in the Swiss Alps in March 2017 and ii) during NASA’s SnowEx campaign at Grand Mesa in February 2017. Snow depth maps are available for two dates separated by approx.1 week, and include an area of ca. 0.5km2 for each of the three sites Davos, Engadine and Grand Mesa.
All data were presented and analyzed in the publication 'Revisiting Snow Cover Variability and Canopy Structure within Forest Stands: Insights from Airborne Lidar Data' (Mazzotti et al., 2019, WRR, doi: 10.1029/2019WR024898). This publication must be cited when using this dataset.

Paper Citation:
 > _Giulia Mazzotti; William Ryan Currier; Jeffrey S. Deems; Justin M. Pflug; Jessica D. Lundquist; Tobias Jonas (2019). Revisiting Snow Cover Variability and Canopy Structure Within Forest Stands: Insights From Airborne Lidar Data. Water Resources Research, 55, 6198– 6216, [doi: 10.1029/2019WR024898](https://doi.org/10.1029/2019WR024898)._

airborne-laser-scanning

display_name: airborne-laser-scanning

canopy-height

display_name: canopy-height

forest-structure

display_name: forest-structure

snow-depth

display_name: snow-depth

snow-distribution

display_name: snow-distribution

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: ALS-based snow depth and canopy height maps from flights in 2017 (Grisons, CH and Grand Mesa, CO)


maintainer: Leo Gallus Bont

en: geoprocessing accessible-forest qgis seilaplan forest openstreetmap

en: Preview

media_type: image/png

format: PNG

mimetype: image/png

en: Juypter Notebook for Data Preparation

en: Power lines vector data (close to the area of the sample forest range)

en: Forest vector data (for sample forest range)

en: Digitised sample perimeter

en: Railways vector data (close to the sample forest range)

en: Juypter Notebook for Data Preparation (online)

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

forest

display_name: forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019


maintainer: Stephan Zimmermann

en: magnesium fagus-orientalis-lipsky biogeochemical-cycling calcium potassium

en: Concentrations of Ca, Mg, K, and Na in throughfall, litterflow and soil solution of a Hyrcanian forst in Northern Iran

en:
Throughfall, litterflow and soil solution were sampled during one whole year under five Oriental beech trees in a mixed Hyrcanian beech forest. The amounts of Ca2+, Mg2+, K+ and Na+ in these fluxes were calculated based on their concentrations and the sampled volumes, and subsequently compared with the respective fluxes in the rainfall and soil solution of an adjacent forest gap.
In addition six soil profiles, one close to every single tree and one in the forest gap, were analyzed for pH, CaCO3, organic matter and texture.

biogeochemical-cycling

display_name: biogeochemical-cycling

calcium

display_name: calcium

fagus-orientalis-lipsky

display_name: fagus-orientalis-lipsky

magnesium

display_name: magnesium

potassium

display_name: potassium

education

en: Education and science

en: Base cation dynamics in an Oriental beech forest


en: biological-control trichopria-drosophilae population-genetics nuclear-microsatellite-markers multilocus-genotypes simple-sequence-repeats drosophila-suzukii switzerland

media_type: text/csv

en: Multilocus genotypes (biallelic coding for 21 nuclear microsatellites) of Trichopria drosophilae described in Gugerli et al. Agrarforschung Schweiz 2019. Missing data denoted as '999'. Population codes (PopNo) are the following: 1, Vezia; 3, Contone ; 5, Davesco; 6, Corteglia; 7, Mezzana; 8, Stabio; 9, Gordola; 10, Sementina; 12, Brusata di Novazzano; 14, Monteggio; 16, Giubiasco; 17, ComoBP; 18, VD; 19, Weil_D; 20, Dossenheim; 21, BioPlanet_Como. Coordinates (CoordCH_E, CoordCH_N) refer to the Swiss coordinates system CH1903.

mimetype: text/csv

en: Table comprising all pertinent information for multiplex PCRs of species-specific nuclear microsatellite makers for Trichopria drosophilae, comprising all 21 newly developed markers, details on full sequences with GenBank accession numbers, primer sequences (including labeling and pig-tails), and repeat motives. PCRs with respective annealing temperatures (AnnealingTemp) refer to Type-It Multiplex PCR Kit (Qiagen, Hilden, Germany).

en:
 Nuclear microsatellite markers and genotype data for _Trichopria ddrosophilae_

This data set comprises (i) the characteristics of a set of 21 species-specific nuclear microsatellites for PCR amplification in _Trichopria drosophilae_ (ii) and genotype data for samples collected in southern Switzerland (Canton of Ticino), with few reference samples from Canton of Vaud, southern Germany, and northern Italy (lab-reared population).
Markers were developed by Ecogenics GmbH, Balgach (Switzerland), using MiSeq Nano 2x250 v2 format (on a mix of 10 individuals). Multiplex PCR assays for multilocus genotyping were established by Ecological Genetics (WSL Birmensdorf), and population genetic analyses are found in Gugerli et al., Agrarforschung Schweiz 2019.

biological-control

display_name: biological-control

drosophila-suzukii

display_name: drosophila-suzukii

multilocus-genotypes

display_name: multilocus-genotypes

nuclear-microsatellite-markers

display_name: nuclear-microsatellite-markers

population-genetics

display_name: population-genetics

simple-sequence-repeats

display_name: simple-sequence-repeats

switzerland

display_name: switzerland

trichopria-drosophilae

display_name: trichopria-drosophilae

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Nuclear microsatellite markers for Trichopria drosophilae, parasitoid wasp on Drosophila suzukii


maintainer: Jana von Freyberg

en: catchment stream-water stable-water-isotope precipitation alptal hydrology

media_type: PDF

format: PDF

media_type: .txt

en:
Version 2 of the dataset contains additional information on:
- line-conditioned (lc) excess
- precipitation sample volumes
- isotope data quality

en: Data Set Documentation: alptal_Isotopes_daily_2015-2019_v2

media_type: .pdf

en: Documentations contains meta data of the data columns and information about the study catchments.

media_type: TXT

en: Single comma-separated txt-file with daily data of stable water isotopes measured in streamwater and precipitation in the Swiss Alptal catchment and two of its tributaries (Erlenbach and Vogelbach), as well as daily data of key hydrometeorological variables from the Alptal valley

en: This dataset contains four years of daily measurements of the natural isotopic composition (2H, 18O) of precipitation and stream water at the Alp catchment (area 47 km2) in Central Switzerland and two of its tributaries (0.73 km2 and 1.55 km2). In addition, the dataset contains daily measurements of key hydrometeorological variables.

alptal

display_name: alptal

catchment

display_name: catchment

hydrology

display_name: hydrology

precipitation

display_name: precipitation

stable-water-isotope

display_name: stable-water-isotope

stream-water

display_name: stream-water

en: Four years of daily stable water isotope data in stream water and precipitation from three Swiss catchments


maintainer: Giulia Mazzotti

en: snow-energy-balance snow-modelling snow-distribution forest-snow forest-structure

en: Coordinates data

en: Includes coordinate information of each surveyed point (7 x 276 = 1932 forest points, 2 open areas)

en: Grid point nomenclature

en: The grid structure of each forest site and the respective nomenclature applied to label individual points within each grid are outlined here.  Each point marks the location of snow depth measurements and co-located canopy structure parameters.

en: Meteo data to drive FSM2 model

en: Includes meteorological driving data used to run the forest snow model FSM2, processed and parsed in text files that match the format required by FSM2. Separate files are available for each field area (Laret, Drusatscha and Ischlag) and season (2012/13, 2013/14, 2014/15). Each file includes data for the period from October 1st to May 31st at hourly resolution.

en: Snow depth data forest sites

en: Contains all snow depth data acquired at all forest sites during winters 2012/13, 2013714 and 2014/15.

en: Snow depth data open sites

en: Contains all snow detph data accquired at open sites nearby the forest stands during the same period.

en: Canopy data

en: Includes all canopy structure metrics computed at all surveyed locations

en:
This dataset contains all snow, canopy and meteorological data presented and used in the publication: Mazzotti, G., Essery, R., Moeser, D. & Jonas T. (2020) 'Resolving spatial variability of forest snow using an energy-balance model with a 1-layer canopy'. Water Resources Research, https://doi.org/10.1029/2019WR026129.
This publication must be cited when using this dataset.

forest-snow

display_name: forest-snow

forest-structure

display_name: forest-structure

snow-distribution

display_name: snow-distribution

snow-energy-balance

display_name: snow-energy-balance

snow-modelling

display_name: snow-modelling

en: Snow depth, canopy structure and meterorological datasets from the Davos area, Switzerland, Winters 2012/13-2014/15, used for high-resolution forest snow modelling


maintainer: Leonie Schönbeck

en: gas-exchange acclimation fluorescence pinus-sylvestris photosynthesis vpd drought

en: Methods light response

en: Methods and parameters for light response curves

en: Methods ACi curves

en:
Parameters and methods for CO2 response curves of Photosynthesis.

Metatdata format by
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Instrument details

en:
Instrument details for all LiCor instruments used during collection of dataset.

Metatdata created following guidelines from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Methods survey

en: Parameters and methods for point measurements / survey measurements

en: Variable names and units

en: Variable names, description and units for the Pfynwald Gas exchange data

en: Methods fluorescence

en:
Parameters and methodology for Fluorescence measurements

Metadata format from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Methods diurnal measurements

en:
Parameters and methodology for diurnal measurements

Metadata format from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Pfynwald gas exchange

en:
Full dataset of Pfynwald gas exchange data taken in the period from June 2013 to October 2020.
All metdata can be found in attached documents.
Data uploaded after quality control using guidelines by Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en:
Gas exchange was measured on control, irrigated and irrigation-stop trees at the irrigation experiment Pfynwald, during the years 2013, 2014, 2016-2020. The measurement campaigns served different purposes, resulting in a large dataset containing survey data, CO2 response curves of photosynthesis, light response curves of photosynthesis, and fluorescence measurements. Measurements were done with LiCor 6400 and LiCor 6800 instruments. Until 2016, measurements were done on excised branches or branches lower in the canopy. From 2016 onwards, measurements were done in the top of the canopy using fixed installed scaffolds.
All metadata can be found in the attached documents.

acclimation

display_name: acclimation

drought

display_name: drought

fluorescence

display_name: fluorescence

gas-exchange

display_name: gas-exchange

photosynthesis

display_name: photosynthesis

pinus-sylvestris

display_name: pinus-sylvestris

vpd

display_name: vpd

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: 2013-2020 gas exchange at Pfynwald


maintainer: Thorsten Bartels-Rausch

en: cryosphere snow antartic laboratory-study arctic polar sea-salt-aerosol

en: Experimental Results: Uptake coefficients vs. temperature and ozone concentration

en:
* Final Data to Figure 3: Uptake coefficients as a function of temperature at 5E12 molecules per cm3 ozone concentration.
* Final Data to Figure 6: Uptake coefficients at different temperatures as a function of gas- phase ozone concentration.

The average ozone uptake coefficients of the three cycles between the bypass and the flow tube per repeat is taken as the mean uptake coefficient for each experiment. Gamma was corrected for gas phase diffusion limitation following the Cooney–Kim– Davis (CKD) method52 (see supporting material of publication for details).

en: Experimental results of uptake coefficient vs. temperature and ozone concentration

en:
Data to Figure 3: Measured uptake coefficients as a function of temperature at 5E12 molecules per cm3 ozone concentration.

Data to Figure 6: Measured uptake coefficients at different temperatures as a function of gas- phase ozone concentration.

en: The reaction of ozone with bromide in polar regions results in the formation of reactive bromide species with impacts on ozone budget and the oxidative capacity of the lower atmosphere. Here, we present a data investigating the temperature dependence of bromide oxidation by ozone using a coated wall flow tube reactor coated with an aqueous mixture of citric acid and sodium bromide, a proxy for sea salt aerosol in snow or the free troposphere. Thus study shows the effect of of organic species at relatively mild temperatures between the freezing point and eutectic temperature as typical for Earth's cryosphere.

antartic

display_name: antartic

arctic

display_name: arctic

cryosphere

display_name: cryosphere

laboratory-study

display_name: laboratory-study

polar

display_name: polar

sea-salt-aerosol

display_name: sea-salt-aerosol

snow

display_name: snow

en: Kinetic experiments on the oxidation of bromide by ozone from 289-245 K.


en: biodiversity soil-impacts forest-management pairwise-stand-comparisons biogeography

en: references

media_type: XLS

en: Bibliography of all references cited in data_wohlgemuth_etal_Neobiota_2022.

en: headers

media_type: ascii, tab separated, also as excel table

en: Description of headers for data_wohlgemuth_etal_Neobiota_2022

en: Baseline data

en: Compiled data on the impacts of seven important NNTs (Acacia dealbata, Ailanthus altissima, Eucalyptus globulus, Prunus serotina, Pseudotsuga menziesii, Quercus rubra, Robinia pseudoacacia) on physical and chemical soil and biodiversity in Europe, and summarise commonalities and differences. A total of 107 publications considered, studies referred to biodiversity attributes and soil properties: 2804 lines and 30 rows.

biodiversity

display_name: biodiversity

biogeography

display_name: biogeography

forest-management

display_name: forest-management

pairwise-stand-comparisons

display_name: pairwise-stand-comparisons

soil-impacts

display_name: soil-impacts

en: Impact of non-native tree species in Europe on soil properties and biodiversity: a review


en: perception-of-ecosystem-services visual-attractiveness online-questionnaire-survey nfi-photos adults-and-teenagers

en: Codebook to SPSS-file

media_type: application/pdf

mimetype: application/pdf

en: Questionnaire French

en: Questionnaire German

en: SPSS-Dataset

en: Dataset in csv-format

en: Questionnaire Italian

en: This questionnaire survey was conducted as an online survey and aimed at investigating the relationship between physical forest characteristics, visual attractiveness of forest and the perception of ecological and cultural ecosystem services in urban forests. Each participant was shown 6 photos out of a pool of 50 photos taken from the Swiss National Forest Inventory (NFI) database. Physical forest characteristics were derived from the photos. The study was conducted as part of the "WaMos meets LFI" (WML) project.

adults-and-teenagers

display_name: adults-and-teenagers

nfi-photos

display_name: nfi-photos

online-questionnaire-survey

display_name: online-questionnaire-survey

perception-of-ecosystem-services

display_name: perception-of-ecosystem-services

visual-attractiveness

display_name: visual-attractiveness

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Relationship between physical forest characteristics, visual attractiveness and perception of ecosystem services in urban forests


en: historical-carthography environmental---history switzerland environmental--policy ecology wetlands

en: Wetlands 1850 - 2010 (shapefiles)

media_type: application/zip

en:
 History of wetlands - GIS-Layers
 Location of wetlands based on signatures in topographic maps
* Basis 1850: original measuring table sheets Dufour created between the years 1834 and 1863.
* Basis 1900/ Basis 1950: The Siegfried maps were updated and published at regular intervals between 1870 and 1949. This long period of time made it possible to reconstruct wetlands for two periods based on the Siegfried Maps: the first edition (hereinafter referred to as "1900") and the last edition ("1950").
* Basis 2010: Map sheets from the National Map from 2006 to 2011 were used for the most recent time period of the reconstruction.
 Location of wetlands due to reconstructions
The reconstruction **must not** be interpreted in the sense of a surface-accurate separation, but shows without claim to location accuracy the approximate extent of the areas that would have corresponded to the mapping criteria for wetlands used in today's topographic maps around 1850, 1900 and 1950. The basics can be found in Stuber & Bürgi 2019, chapter 5.4.

en:
Naturally, large parts of the Swiss Plateau are characterised by wetlands
and meandering rivers. That this is no longer the case today is the result
of centuries of efforts to obtain dry land. But how did this process take
place? What were the relevant actors and what were their motivations? And
what can be said about the ecological consequences of this development?

In a research project on the history of wetlands in Switzerland since 1700,
we conducted (a) a historical analysis of the development of land use in
wetlands and the actors involved, (b) a historical-cartographic
reconstruction of wetland extent since 1850 and (c) an evaluation of
ecological effects of changes in wetlands on various organisms groups.

The series of GIS layers on wetland history stem from the second part of
the project. The area reconstruction is based on digitized and homogenized
signatures from national map series, as they have been available since
about 1850. Details about the digitalization process and the homogenization
procedures applied ("Rekonstruktionen") are included in Stuber & Bürgi
2019.

Book Citation:
 > Stuber M, Bürgi M (2019) Vom «eroberten Land» zum Renaturierungsprojekt. Geschichte der Feuchtgebiete in der Schweiz seit 1700. "Bristol Schriftenreihe", Band 59. Haupt Verlag, Bern, Stuttgart, Wien. 262 Seiten.

ecology

display_name: ecology

environmental---history

display_name: environmental---history

environmental--policy

display_name: environmental--policy

historical-carthography

display_name: historical-carthography

switzerland

display_name: switzerland

wetlands

display_name: wetlands

en: History of wetlands in Switzerland since 1850


maintainer: Océane Hames

en: arctic-sea-ice openfoam snow-transport snow-deposition mosaic

en: Paper Draft

en: This is the initial draft of the paper where the snowBedFoam 1.0. results are tested against Terrestrial Laser Scan (TLS) measurements of snow dynamics on Arctic sea ice (MOSAiC expedition). It highlights the numerical limitations of our model as well as the measurement uncertainties, which may occur in such extreme environments.

en: MOSAiC Met City preliminary (Level 2) wind data

media_type: zip-compressed folder of csv

en:
Extract from the preliminary MOSAiC atmospheric data (Level 2) for the time period 6th to 13th of November, 2019.
This data was used to set up the fluid forcing parameters in the snowBedFoam simulations on MOSAiC sea ice. It is being published in this repository with the kind permission from Matthew Shupe and his team.
The final processed and quality controlled version of this dataset (Level 3) has not been published yet. A complete reference will be added in this description once it is released.

en: snowBedFoam 1.0.

media_type: .zip

en:
OpenFOAM-2.3.0. scripts containing the implemented Eulerian-Lagrangian snow transport model.

The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en:
snowBedFoam 1.0. is a snow transport solver implemented in the Computational Fluid Dynamics (CFD) software OpenFOAM. It is adapted from the standard multi-phase flow solver DPMFoam for application in snow-influenced environments.

To simulate aeolian snow transport, snowBedFoam 1.0. handles coupled Eulerian–Lagrangian phases, which involve a finite number of particles (snow) spread in a continuous phase (air). The snow erosion and deposition are modelled through physically-based equations such as the ones employed in the well-established LES-Lagrangian Stochastic Model (Comola and Lehning, 2017 ; Sharma et al., 2018). This modelling approach is computationally intensive and thus adapted to simulate snow movement and distribution on small scale terrain.

snowBedFoam 1.0. was tested against topographical data collected on Arctic sea ice during the MOSAiC expedition (Clemens-Sewall, 2021) . Together with atmospheric data from the MOSAiC Met City (Shupe et al., 2021) used for the fluid forcing, the model was able to accurately simulate the zones of erosion and deposition of snow along a complex ice ridge structure.

The core code of snowBedFoam 1.0. is also accessible on the WSL/SLF GitLab repository (more details in the Resources section).

arctic-sea-ice

display_name: arctic-sea-ice

mosaic

display_name: mosaic

openfoam

display_name: openfoam

snow-deposition

display_name: snow-deposition

snow-transport

display_name: snow-transport

en: snowBedFoam: an OpenFOAM Eulerian-Lagrangian solver for modelling snow transport


en: stable-water-isotopes alptal streamflow runoff groundwater

en: Deuterium groundwater and baseflow October 2017

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

Date: Date (year-month-day)
Location: Well number or outlet
X: X coordinate (CH1903 LV03)
Y: Y coordinate (CH1903 LV03)
riparian: riparian wells (i.e. from the riparian-like cluster as presented in Kiewiet et al. (2019)) are marked a one, all other wells are marked a zero
d.D (per mil): Deuterium composition (per mil)

en: Precipitation and discharge event A

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
With any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date (year-month-day) and time (hours:minutes:seconds) in UTC
Q: Discharge in mm per hour at catchment outlet (697234,210472)
P: Rainfall in mm per hour averaged for two rain gauges (697494,210675) and (698004, 210680)

en: Deuterium rainfall event C

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date (year-month-day) and time (hours:minutes:seconds) in UTC
P d.D: Deuterium composition of the rainfall samples (per mil)
X: X coordinate (CH1903 LV03)
Y: Y coordinate (CH1903 LV03)

en: Deuterium rainfall event B

en: Deuterium streamwater event C

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date and time of sample collection (UTC; year-month-day, hours:minutes)
Q d.D: Deuterium composition (per mil) of streamwater sampled at the catchment outlet (697234,210472); the first sample is used as pre-event streamflow sample

en: Deuterium streamwater extra event

en: Deuterium streamwater event B

en: Precipitation and discharge extra event

en: Deuterium groundwater and baseflow August 2017

en: Deuterium rainfall extra event

en: Deuterium groundwater and baseflow October 2016

en: Precipitation and discharge event C

en: Deuterium rainfall event A

en: Precipitation and discharge event B

en: Deuterium streamwater event A

en:
This dataset includes discharge and rainfall measurements and deuterium compositions of streamflow, rainfall and groundwater, for four rainfall events and three baseflow snapshot campaigns in the Studibach (Alptal, Switzerland). More specifically, we present the following data:

- Specific discharge at the catchment outlet at 5-minute resolution (mm per hour);
- Rainfall at 5-minute resolution (mm per hour);
- Rainfall deuterium composition (‰);
- Stormflow deuterium composition (‰);
- Groundwater and baseflow deuterium compositions (‰).

For the files containing rainfall and discharge timeseries (QP), and rainfall and streamwater deuterium compositions ("Deuterium_Rainfall" and "Deuterium_Streamwater"), we added the corresponding event identifier (A, B, C or extra) to the file names. For the files containing the groundwater and baseflow deuterium values ("Deuterium_Snapshot") we added the sample collection date to the file name. We included the X and Y coordinates for each data point (coordinate system: CH1903 LV3) as well as the date and time (UTC).

More information on the data collection and preparation can be found in Kiewiet et al. (in review). A detailed description of the baseflow snapshot campaigns can also be found in Kiewiet et al., 2019.

alptal

display_name: alptal

en: Discharge, rainfall, and deuterium compositions of streamwater, rainwater and groundwater, for four rainfall events in the Studibach, Alptal, Switzerland


rorcc

maintainer: Tobias Wechsler

title_for_slug: rorcc

en: climate-change run-of-river-power-plants design-discharge environmental-flow hydropower

en: RoRCC

en:
The dataset “RoRCC” consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
-	metadata on the RoR power plants under consideration
-	annual and seasonal production scenarios differentiated into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)
-	annual and seasonal production loss due to environmental flow requirements
-	annual and seasonal the technical increase potential (via design discharge optimisation)
-	annual and seasonal changes in the hydrological cycle for the three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)

en:
The dataset "RoRCC" consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
1) metadata on the RoR power plants under consideration, 2) annual and seasonal production potential scenarios under into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099), 3) annual and seasonal streamflow scenarios, 4) annual and seasonal production loss due to environmental flow requirements, 5) annual and seasonal the technical increase potential (via design discharge optimisation) and 6) annual and seasonal changes in the hydrological cycle.

climate-change

display_name: climate-change

design-discharge

display_name: design-discharge

environmental-flow

display_name: environmental-flow

hydropower

display_name: hydropower

run-of-river-power-plants

display_name: run-of-river-power-plants

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Frank Techel

en: european-alps danger-level snow avalanche-forecast warning-regions

en: shape file warning regions Alps

en: Forecast avalanche danger level

en: contains the highest forecast danger level (dangerLevelMax) for each day and warning region

en:
This dataset contains the data used in the publication by Techel et al., 2018 _Spatial consistency and bias in avalanche forecasts - a case study in the European Alps_ (Nat Haz Earth Syst Sci).
For details on the data please refer to this publication.
The dataset contains the following:
- shape files for the warning regions in the Alps
- highest forecast danger level for each warning region and day

avalanche-forecast

display_name: avalanche-forecast

danger-level

display_name: danger-level

european-alps

display_name: european-alps

snow

display_name: snow

warning-regions

display_name: warning-regions

en: Forecast avalanche danger level European Alps 2011 - 2015


maintainer: Maria Elvira Murazzi

en: forest-trees uptake polystyrene nanoplastic 13c-labelling

en: Nanoplastic in forests experiment

en:
Data embargoed until August 2022, and it will be provided upon request

-  excel file containing: two working sheets (leaf supply and root supply experiment) with a table with the values 13C-nanopolystyrene in the different tissues of the two forest tree species; graph showing the differences between controls and treatments of 13C-nanopolystyrene enrichment for each tissue of each forest tree species; ANOVA table showing significant values after having exposed the tree species to 13C-nanopolystyrene

en:
The fate of plastic in the environment is of global concern, because its production recently has
increased strongly and it accumulates in terrestrial and aquatic ecosystems. Although some knowledge on
its role in aquatic and terrestrial ecosystems was gained in the recent decade, hitherto very little is known
about the impact of micro and nanoplastics in forest ecosystems.

The aim of this pioneering project was to explore if nanoplastics are taken up by forest trees species
through leaves or roots. In greenhouse experiments, we exposed leaves or roots of seedling of two forest
trees species to solutions with highly 13C-labelled polystyrene nanoparticles (13C-nPS, 99 atom%) and
examined if they were incorporated in different above- and belowground tissues.

Treated part of the trees for both species showed significant 13C-enrichment, indicating that trees take up nanoparticles. However, the overall 13C signal strength in tissues that were not exposed to the 13C label remained low (Δδ13C<1‰) and was confined to a few seedlings, leaving it ambiguous whether nanoplastic transport occurs or not.

We acknowledge that the new method developed might be not sensitive enough to unequivocally detect
mechanisms of nanoplastic uptake and transport at environmentally realistic concentrations.

forest-trees

display_name: forest-trees

nanoplastic

display_name: nanoplastic

polystyrene

display_name: polystyrene

uptake

display_name: uptake

en: Nanoplastics in forests: Exploring the effects of nanoplastics on forest soils and tree physiology (NanoPlast)


maintainer: Varun Sharma

en: mesoscale-modelling alps blowing-snow snow-atmosphere-interaction antarctica

media_type: ZIP

en:
REPRODUCIBILITY_POSTPROCESSING.zip contains data and scripts used to produce all figures from for the associated manuscript submitted for peer review ( see section on Citations below )

The folders stand for the three case studies presented in the manuscript. Two case studies (case Ia and case Ib) are on simulations in Antarctica and one case study
case II is for simulations in the Alps.

The associated data in the form of netcdf files or text files were produced using CRYOWRF v1.0

Apart from reproducibility, the intention of sharing these scripts is also to make it easy for new users to adopt CRYOWRF and be efficient, in particular in processing snowpack outputs.

The scripts were tested on multiple machines (different OSes) with the attached YAML file (wrf_analysis.yml) to setup the conda environment. All scripts were run using spyder as the IDE.

en: REPRODUCIBILITY_SIMULATION.zip contains all the extraneous files required to perform the simulations in associated manuscript (see Citations 3 in README.txt). The purpose of sharing these files apart from purposes of reproducibility is to also serve as templates for users to learn the workflow of CRYOWRF and perform simulations for their own purposes.

en:
This repository contains data required for reproducibility of the results to be published in the associated manuscript.

Apart from reproducibility, the attached datasets also serve as templates for new users to adopt CRYOWRF in their research.

The datasets consist of two folders organized in zip format:

1. REPRODUCIBILITY_SIMULATION:
  Consists of namelists for WPS, WRF and SNOWPACK to reproduce simulations published in the manuscript
  Additional files include datasets (from IMAU-FDM / RACMO, see "credits" below ) as well as helper python scripts to
  produce *.sno files
  which are used as initial conditions for SNOWPACK in CRYOWRF.

2. REPRODUCIBILITY_POSTPROCESSING:
   Includes outputs of CRYOWRF and python scripts used to prepare figures in the manuscript.

Each of the folders have their own readme files for more details.

 Code
citation: Varun Sharma. (2021, July 2). vsharma-next/CRYOWRF: CRYOWRF v1.0 (Version v1.0). Zenodo. http://doi.org/10.5281/zenodo.5060165

location: https://gitlabext.wsl.ch/atmospheric-models/CRYOWRF   (stable releases / institutional repo)
        https://github.com/vsharma-next/CRYOWRF            (dev branches / developer repo)

 Publication
**Introducing CRYOWRF v1.0: Multiscale atmospheric flow simulations with advanced snow cover modelling.**
Varun Sharma, Fraziska Gerber and Michael Lehning, Submitted to Geoscientific Model Development

 Acknowledgements
We thank Peter Kuipers Munneke (P.KuipersMunneke@uu.nl) for preparing and sharing outputs of IMAU-FDM and RACMO used for initial conditions for case Ia. The relevant citations for the methods through which these datasets were generated are:

* Kuipers Munneke, P., S. R. M. Ligtenberg, B. P. Y. Noël, I. M. Howat, J. E. Box, E. Mosley-Thompson, J. R. McConnell, K. Steffen, J. T. Harper, S. B. Das and M. R. van den Broeke. 2015. Elevation change of the Greenland ice sheet due to surface mass balance and firn processes, 1960-2014. The Cryosphere, 9, 2009-2025. doi:10.5194/tc-9-2009-2015

 * Ligtenberg, S. R. M., P. Kuipers Munneke, B. P. Y. Noël, and M. R. van den Broeke. 2018. Brief communication: Improved simulation of the present-day Greenland firn layer (1960-2016). The Cryosphere, 12, doi:10.5194/tc-12-1643-2018

alps

display_name: alps

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

mesoscale-modelling

display_name: mesoscale-modelling

snow-atmosphere-interaction

display_name: snow-atmosphere-interaction

en: Reproducibility Dataset for CRYOWRF v1.0


weather-station-davos-wolfgang

maintainer: Jörg Wieder

title_for_slug: weather-station-davos-wolfgang

en: pressure relative-humidity raclets temperature weather

en: Weather Station Davos Wolfgang

en: The data file contains date and time (YYYY-MM-DD hh:mm:ss) in UTC, temperature (°C), relative humidity (%), pressure (hPa) at 10 m above ground and above sea level. The data was averaged over 10 minutes.

en: The dataset contains weather parameters measured at Davos Wolfgang (LON: 9.853594, LAT: 46.835577).

pressure

display_name: pressure

raclets

display_name: raclets

relative-humidity

display_name: relative-humidity

temperature

display_name: temperature

weather

display_name: weather

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


modeling-snow-failure-with-dem

title_for_slug: modeling-snow-failure-with-dem

en: discrete-element-modelling snow snow-micro-mechanics snow-failure snow-avalanche

en: Dataset

en: The zip file contains the data underlying the figures presented in Bobillier et al. (2019). The figures can be reproduced with the python file, which is also provided.

en: Read-me

en: The read-me file contains a description of all the data provided in the zip file.

en: Python file

media_type: text/x-python

en: Python file to reproduce the figures in Bobillier et al. (2019)

mimetype: text/x-python

en: This data set includes the modeling results described in the research article by Bobiller et al. (2020). All the figures in the article can be reproduced with the data provided.

discrete-element-modelling

display_name: discrete-element-modelling

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-micro-mechanics

display_name: snow-micro-mechanics

en: Modeling snow failure with DEM


maintainer: EnviDat Support

en: snow-stratigraphy weissfluhjoch snowmicropen snow-temperature water-front ice-layers

en: WFJ_ICE_LAYERS dataset

en: README

media_type: text/plain

en: The WFJ_ICE_LAYERS dataset contains multi-instrument snowpack measurements at high temporal resolution, which enable to monitor the formation of deep ice layers due to preferential water flow, at the Weissfluhjoch research site, Davos, Switzerland. It covers the winter 2016/2017, with a focus on the early melting season. This dataset includes traditional snowpack profiles (weekly resolution, 15/11/2016-29/05/2017), SnowMicroPen penetration resistance profiles (daily resolution, 01/02/2017-19/04/2017), snow temperatures measured at different heights in the snowpack (half-hourly resolution, 01/03/2017-15/04/2017) and the water front height derived from an upward-looking ground penetrating radar (3-hour resolution, 04/03/2017-08/04/2017). The measurements are complemented by initialization files for SNOWPACK model simulations with the ice reservoir parameterization at Weissfluhjoch for the winter 2016/2017.

ice-layers

display_name: ice-layers

snow-stratigraphy

display_name: snow-stratigraphy

snow-temperature

display_name: snow-temperature

snowmicropen

display_name: snowmicropen

water-front

display_name: water-front

weissfluhjoch

display_name: weissfluhjoch

en: WFJ_ICE_LAYERS: Multi-instrument data for monitoring deep ice layer formation in an alpine snowpack


en: hazard-mapping snow avalanche natural-hazard satellite

en: SPOT6 Avalanche outlines 24 January 2018

media_type: SHP

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset.

en:
Outlines of 18'737 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 24 January 2018. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

Abstract.
Accurate and timely information on avalanche occurrence are key for avalanche warning, crisis management and avalanche documentation. Today such information is mainly available at isolated locations provided by observers in the field. The achieved reliability considering accuracy, completeness and reliability of the reported avalanche events is limited. In this study we present the spatial continuous mapping of a large avalanche period in January 2018 covering the majority of the Swiss Alps (12’500 km2).

We tested different satellite sensors available for rapid mapping during a first avalanche period. Based on these experiences, we tasked SPOT6/7 data for data acquisition to cover the second, much larger avalanche period. We manually mapped the outlines of 18’737 individual avalanche events, applying image enhancement techniques to analyze regions in cast shadow as well as brightly illuminated ones. The resulting dataset of mapped avalanche outlines, having a unique completeness and reliability, is evaluated to produce maps of avalanche occurrence and avalanche size. We validated the mapping of the avalanche outlines using photographs acquired from helicopters just after the avalanche period.

This study demonstrates the applicability of optical, very high spatial resolution satellite data to map an exceptional avalanche period with very high completeness, accuracy and reliability over a large region. The generated avalanche data is of great value to validate avalanche bulletins, complete existing avalanche databases and for research applications by enabling meaningful statistics on important avalanche parameters.

Koordinate System: CH1903+ LV95 LN02

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow

education

en: Education and science


en: conservation amphibians landscape wetlands occupancy-models

en: Original raw data

media_type: XLSX

en: This file contains the original raw monitoring data as provided by the canton of Aargau. Access is restricted and only considered upon request and in consultation with the canton of Aargau.

en: Model code

media_type: Rmd

en: This R markdown file contains all code and descriptions necessary to load and format the provided data and to fit the dynamic occupancy models described in the associated publication, including JAGS code for the fitted models.

en: Model code, description

media_type: HTML

en: This is the output of the R markdown file that provides JAGS model code and describes how to format the provided data and fit the dynamic occupancy models described in the associated publication, for a quick overview.

format: HTML

en: Readme

en: Description of methods and datasets.

en: Covariate data 2

media_type: CSV

en: This file contains covariate data that changes over time for 856 ponds in 21 years (long format): whether or not a pond exists in year _t_, the age of constructed ponds in year _t_, structural connectivity of the pond in year _t_.

en: Covariate data 1

en: This file contains covariate data that does not change over time for 856 ponds: the region the pond is in, whether the pond is old or new (constructed since 1991), elevation, water surface area, fluctuations of the water table (yes, no), the percent forest cover in 100m radius around the pond, the area or large (>6m wide) roads in 1km radius around the pond.

en: Observation data

en: This file contains detection/non-detection data for the 12 amphibian species between 1999 and 2019 for 3 annual visits. Detectable denotes whether or not a visit j was made to pond i in year t. ObservedID gives a unique ID for the observer collecting the data during visit j to pond i in year t.

en:
In the canton of Aargau, hundreds of new ponds have been constructed since the 1990s to benefit declining amphibian populations. This dataset consists of monitoring data for all 12 pond-breeding amphibian species in the canton of Aargau from 1999 to 2019 in 856 ponds, and environmental variables that describe the ponds and the landscape surrounding the ponds. Species observation data is detection/non-detection data from repeat visits during survey years, during which all potentially suitable ponds in an area were surveyed. Environmental variables describing the ponds are whether the pond has been newly constructed since 1991 or not, pond age (if constructed), elevation a.s.l., the water surface area, and whether the water table fluctuates or not. Environmental variables describing the surroundings of the ponds are the percent area of forest within a circular buffer of radius 100m around the pond, the area of large (width ≥6m) roads within a circular buffer of radius 1km around the pond, and structural connectivity.

The canton of Aargau is the owner of the monitoring data; the original datafile is only disclosed upon request and in consultation with the canton of Aargau.

The edited dataset contains cleaned observation data for the 12 amphibian species, as well as compiled and edited covariate data and code to fit dynamic occupancy models.

amphibians

display_name: amphibians

conservation

display_name: conservation

landscape

display_name: landscape

occupancy-models

display_name: occupancy-models

wetlands

display_name: wetlands

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Amphibian observation and pond data (Aargau, Switzerland)


aerosol-data-weissfluhjoch

title_for_slug: aerosol-data-weissfluhjoch

en: inp raclets ice-nucleation particles aerosol linda

en: OPC-N3 Dataset Weissfluhjoch

media_type: text/csv

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: APS Dataset Weissfluhjoch

media_type: application/x-netcdf

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Weissfluhjoch.

mimetype: application/x-netcdf

en: OPC-GT526S Dataset Weissfluhjoch

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en: LINDA Dataset Weissfluhjoch

en: The LINDA file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en: SMPS Dataset Weissfluhjoch

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity) in a temporal resolution of 2 minutes, with time in UTC, measured at Weissfluhjoch.

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Weissfluhjoch (LON: 9.806475, LAT: 46.832964). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs), and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (SMPS 3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3787 TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and LINDA: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l min‾¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the LED based Ice Nucleation Detection Apparatus (LINDA, University of Basel) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

linda

display_name: linda

particles

display_name: particles

raclets

display_name: raclets

education

en: Education and science

en: Aerosol Data Weissfluhjoch


en: sea-ice terrestrial-laser-scans tls sea-ice-elevation polar

en: Link to post-processed TLS’s of Antarctic sea ice

en: Post Processed TLS's

en: Compressed dat files

en: Data processing documentation

media_type: DOC

en:
This dataset comprises of a post-processed set of terrestrial laser scans (TLS’s) of Antarctic sea ice obtained during the Sea Ice Physics and Ecosystem Experiment-2 (SIPEX-2, http://seaice.acecrc.org.au/sipex2012/) in September-November 2012. The post-processing steps include the registration of the individual scans into a single 3-dimensional point cloud, the removal of unwanted noise caused by particles in the air (i.e., snow crystals), and the final generation of surface grids based on the cleaned individual point returns. The final product includes the ‘xyz’ coordinates of the individual point measurements, and gridded surfaces covering study areas of 100m x 100 m, and at resolutions of 0.01 m, 0.1 m, 0.25 m, 0.5 m and 1 m for each of the survey dates. Additionally, subgrid statistics that include the mean elevation, standard deviation, minimum and maximum elevations, range, and number of point returns in each gridcell are generated. The final product is provided in space-delimited text files, with the surface grids provided in Digital Terrain Model (DTM) format ready for visualization in any GIS software.

How to cite:
Please also cite the original publication when using this data set.: Trujillo, E., K. Leonard, T. Maksym, and M. Lehning (2016), Changes in snow distribution and surface topography following a snowstorm on Antarctic sea ice, J. Geophys. Res. Earth Surf., 121, doi:[10.1002/2016JF003893](https://dx.doi.org/10.1002/2016JF003893).

polar

display_name: polar

sea-ice

display_name: sea-ice

sea-ice-elevation

display_name: sea-ice-elevation

terrestrial-laser-scans

display_name: terrestrial-laser-scans

tls

display_name: tls

envidat

en: EnviDat: the Environmental Data Portal

en: High resolution sea ice surface topography from the SIPEX-2 expedition, East Antarctica, 2012


en: ritigraben permafrost permos ground-temperature borehole

en: DATA ACCESS

media_type: URL

en: Map of PERMOS borehole network

en: PERMOS DATA POLICY

media_type: PDF

en:
_ENVIDAT NOTE: Data currently unvailable and measures are being taken to recover and restore the data files._

Processed ground temperature measurements at the Ritigraben permafrost borehole (RIT_0102) in canton Valais, Switzerland. The borehole is located at 2690 m asl on a flat site. The surface material is coarse blocks and borehole depth is 30 m. Thermistors used YSI 44006. Year of drilling 2002. This borehole is part of the Swiss Permafrost network, PERMOS (www.permos.ch). Contact phillips@slf.ch for details of processing applied.

borehole

display_name: borehole

ground-temperature

display_name: ground-temperature

permafrost

display_name: permafrost

permos

display_name: permos

ritigraben

display_name: ritigraben

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: RIT1: Processed permafrost borehole data (2690  m asl), Ritigraben, Switzerland


en: antarctica mass-flux meteorological-data drifting-snow eddy-covariance-measurements blowing-snow micro-rain-radar large-eddy-simulations turbulence

media_type: zip-compressed folder of text files (f90)

en: Source code of the large-eddy simulations coupled with a Lagrangian stochastic model (LES-LSM), available on GitLab.

en: Measurement data from Micro Rain Radar (MRR)

media_type: NetCDF

en: Remote sensing data of blowing snow from a Micro Rain Radar (MRR).

en: Measurement data from micro-meteorological station

media_type: zip-compressed folder of ASCII files

en: Automatic in-situ measurements of micro-meteorology and snow transport

en: Simulation data for a situation with significant snow transport

en: Data from two LES-LSM simulations called Drift_1 and Drift_2, which reproduce the conditions observed at the S17 site on 11th January 2019, 00:40 to 00:50 UTC.

en: Readme

media_type: TXT

en: Meta data

en: Simulation data for a situation with negligible snow transport

en: Results from two LES-LSM simulations called NoDrift_1 and NoDrift_2, which reproduce the conditions observed at the S17 site on 12th January 2019, 05:40 to 05:50 UTC.

en: Measurement data from snow particle counter at MRR site

en: Near-surface observations of drifting snow from a Snow Particle Counter (SPC) installed at the location of the Micro Rain Radar.

en:
This dataset contains measurement and simulation data. The measurements characterize the standard meteorology, turbulence, and snow transport at the S17 site near Syowa Station in East Antarctica during an expedition in austral summer 2018/2019. Large-eddy simulations with sublimating particles provide additional insight into the latent and sensible heat exchange between snow and air in two example situations observed at the S17 site.

A part of the measurement data was recorded by an automatic measurement station from 10th January 2019 to 26th January 2019. This measurement station was equipped with standard meteorological sensors, a three-dimensional ultrasonic anemometer, an open-path infrared gas analyzer, a snow particle counter, an infrared radiometer for measurements of the surface temperature, and a sonic ranging sensor measuring changes in snow surface elevation.

At a horizontal distance of approximately 500 m, a Micro Rain Radar (MRR) was installed in a tilted configuration with an elevation angle of 7° for remote sensing of blowing snow between 25th December 2018 and 24th January 2019. In addition, near-surface in-situ measurements of snow transport were performed at the location of the MRR by deploying a snow particle counter from 27th December 2018 to 24th January 2019.

The simulations cover a 18 x 18 x 6 m³ domain and reproduce the steady-state conditions during a 10-min interval with significant snow transport and another 10-min interval with negligible snow transport. We provide the model source code and the post-processed simulation data, i.e., horizontally averaged quantities as a function of height and time.

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

drifting-snow

display_name: drifting-snow

eddy-covariance-measurements

display_name: eddy-covariance-measurements

large-eddy-simulations

display_name: large-eddy-simulations

mass-flux

display_name: mass-flux

meteorological-data

display_name: meteorological-data

micro-rain-radar

display_name: micro-rain-radar

turbulence

display_name: turbulence

education

en: Education and science

en: Meteorology and snow transport at S17 near Syowa, Antarctica, in austral summer 2018/2019


en: antarctica blowing-snow surface-mass-balance reproducibility cryowrf

media_type: ZIP

en: Python scripts to reproduces figures in Gerber et al., 2022, submitted.

media_type: application/zip

en: Processed WRF output (run with Noah-MP land surface model) used for the analysis and the figures in the paper.

en: Static input data from the WRF simulations (used in the python scripts in Scripts_Reproducibility).

en: Namelist and input files and information to run the WRF and CRYOWRF simulations used in the paper.

en: Processed CRYOWRF output used for the analysis and the figures in the paper.

en:
This dataset contains data and scripts for "CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB" (Gerber et al., submitted).

* Simulation_setup: Namelists and input information to run the simulation. Some input files need to be downloaded from Sharma et a., 2021.
* Static_input: Static topography input file of WRF (geo_em.d01).
* WRF_27km_NoahMP: Preprocessed WRF output of the simulation run with the WRF using the surface parameterization Noah-MP to reproduce the figures and results in the paper.
* WRF_27km_CRYOWRF: Preprocessed WRF output of the simulation run with CRYOWRF to reproduce the figures and results in the paper.
* Scripts_Reproducibility: Python scripts to reproduce the figures and results in the paper.

Note:

* To run some of the scripts Atmospheric Weather station data needs to be prepared using Gerber and Lehning, 2022.
* AWS data is not provided and needs to be downloaded from the corresponding databases. Please make sure to comply with the respective terms and conditions.

cryowrf

display_name: cryowrf

reproducibility

display_name: reproducibility

surface-mass-balance

display_name: surface-mass-balance

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Reproducibility dataset for CRYOWRF validation


maintainer: Lisa Hülsmann

en: empirical-mortality-models tree-mortality forest-reserves inventory-data tree-growth

en: Calibration data

en:
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.

 Meta data
Reserve: Name of the forest reserve

Plot: Permanent plot number

 Tree data
Species: Latin species name (or species group, cf. _Quercus_ spp.)

y: Status of the tree with 0 = alive and 1 = dead

dt: Length of the mortality period (years)

DBH: Diameter at breast height (mm) of the second inventory

relBAI: Annual relative basal area increment (-) calculated based on the first and the second DBH measurement as the compound annual growth rate of the trees basal area

 Stand data
_All stand variables were calculated for the second inventory._

mDBH: Mean diameter at breast height (mm)

iqrDBH: Interquartile range of diameter at breast height (mm)

BA: Basal area per hectare (m2 ha-1)

N: Number of trees per hectare (ha-1)

 Climate data
_Both climate variables were calculated for the period between the second and the third inventory._

P: Mean annual precipitation sum (mm)

mT: Mean annual air temperature (°C)

en:
The dataset comprises > 90 000 records from inventories in 54 strict forest reserves in [Switzerland](https://www.wsl.ch/de/wald/biodiversitaet-naturschutz-urwald/naturwaldreservate.html) and [Lower Saxony / Germany](http://naturwaelder.de/) along a considerable environmental gradient. It was used to develop parsimonious, species-specific mortality models for 18 European tree species based on tree size and growth as well as additional covariates on stand structure and climate.

 Inventory data
Measurements had been conducted repeatedly on up to 14 permanent plots per reserve for up to 60 years with re-measurement intervals of 4 - 27 years. The permanent plots vary in size between 0.03 and 3.47 ha. The inventories provide diameter measurements at breast height (DBH) and information on the species and status (alive or dead) of trees with DBH ≥ 4 cm for Switzerland and ≥ 7 cm for Germany.

 Data selection
We excluded three permanent plots where at least 80 % of the trees died during an interval of 10 years, and mortality could be clearly assigned to a disturbance agent. Mortality in the remaining stands was rather low, with a mean annual mortality rate of 1.5 % and strong variation between plots from 0 to 6.5 % (assessed for trees of all species with DBH ≥ 7 cm).
We only used data from permanent plots with at least 20 trees per species to obtain reliable plot-level mortality rates even for species with low mortality rates (about 5 % during 10 years), and selected tree species occurring on at least 10 plots to cover sufficient ecological gradients. This led to a dataset of 197 permanent plots and 18 tree or shrub species: _Abies alba_ Mill., _Acer campestre_ L., _Acer pseudoplatanus_ L., _Alnus incana_ Moench., _Betula pendula_ Roth, _Carpinus betulus_ L., _Cornus mas_ L., _Corylus avellana_ L., _Fagus sylvatica_ L., _Fraxinus excelsior_ L., _Picea abies_ (L.) Karst, _Pinus mugo_ Turra, _Pinus sylvestris_ L., _Quercus pubescens_ Willd., _Quercus_ spp. (_Q. petraea_ Liebl. and _Q. robur_ L.; not properly differentiated in the Swiss inventories), _Sorbus aria_ Crantz, _Tilia cordata_ Mill. and _Ulmus glabra_ Huds..

 Predictors of tree mortality
We considered tree size and growth as key indicators for mortality risk. Radial stem growth between the first and second inventory and DBH at the second inventory were used to predict tree status (alive or dead) at the third inventory. To this end, the annual relative basal area increment (relBAI) was calculated as the compound annual growth rate of the trees basal area. Additional covariates on stand structure and climate comprise mean annual precipitation sum (P), mean annual air temperature (mT), the mean and the interquartile range of DBH (mDBH, iqrDBH), basal area (BA) and the number of trees (N) per hectare.

 Further information
For further information, refer to Hülsmann _et al_. (in press) How to kill a tree – Empirical mortality models for eighteen species and their performance in a dynamic forest model. _Ecological Applications_.

empirical-mortality-models

display_name: empirical-mortality-models

forest-reserves

display_name: forest-reserves

inventory-data

display_name: inventory-data

tree-growth

display_name: tree-growth

tree-mortality

display_name: tree-mortality

en: Calibration data for empirical mortality models of 18 European tree species


en: urban-region development-priorities europe spatial-information strategic-plans

en: Planning intentios

en:
The present dataset is part of the report titled Gradinaru S.R., Hersperger A.M., Schmid F. (2021). Deriving Planning Intentions from written planning documents. Report on CONCUR Project- From plans to land change: how strategic spatial planning contributes to the development of urban regions.
The data corresponds to the data collected as part of the DPI Method for deriving all PIs contained in a plan (open coding) as detailed in section 4 of the report. The method involved reading the plans to break down of information in meaningful discrete “incidents” or planning intentions. To identify the planning intentions, the starting points were represented by a) the structuring of the plans in chapters and sub chapters and b) the themes that the plans addressed. Thus, the collected information was not grouped according to pre-defined categories of planning intentions, but rather put together as a list of intentions as revealed by each plan. As a result, we provide, for each case study, a document (named [Urban region name] PI as defined in the plan) which contains:
	Date when the information was filled in.
	Name of the urban region and analysed strategic spatial plan .
	A list of all planning intentions contained in a plan, with each PI being addresses as follows:
	Name of PI as it appears in the plan
	Translated name of the PI (i.e. short name for easy understanding of the meaning)
	Explanation regarding the meaning of the PI
	Why the PI is considered a priority for the urban region
	Spatial information on the PI (text and cartographic representations).
In total, 14 documents are available, one for each case study. Documents contain up to 20 pages of information extracted from the plans together with explanations and notes taken during plan reading.

development-priorities

display_name: development-priorities

europe

display_name: europe

spatial-information

display_name: spatial-information

strategic-plans

display_name: strategic-plans

urban-region

display_name: urban-region

education

en: Education and science

en: Planning intentions in strategic plans of European urban regions