en: hydropower ecosystem-protection gis decision-making integral-water-management

en: Indicators

media_type: text/markdown

en: The indicators capture supporting ecosystem functions.

media_type: SHP

format: SHP

en:
 A spatial dataset and tool to simultaneously assess hydropower potential and ecological potential of the Swiss river network (Version 2016)

 Introduction
The steadily growing demand for energy and the simultaneous pursuit of decarbonisation are increasing interest in the expansion of renewable energies worldwide. In Switzerland, various funding projects have been launched to promote technologies in the field of renewable energies and their application as quickly as possible. With the introduction of a funding instrument in 2009, the number of projects submitted to produce renewable energies increased rapidly. The applications for small hydropower plants (≤ 10 MW) were correspondingly numerous. However, the assessment of the environmental impact and its comparison with hydropower importance is still not standardized.
To provide a basis for decision-making, a methodology was developed to determine the overall hydropower potential of a region. A detailed assessment of each river reach, and the systematic and holistic assessment of small hydropower projects at a regional scale are combined here. The assessment of a river reach is conducted at the river space (i.e., the river and adjacent areas) and at the surrounding landscape level. The HYDROpot_integral methodology was developed as part of Carol Hemund's dissertation (2012) at the University of Bern. It allows the evaluation of river reaches holistically, regarding ecological, social, economic and cultural criteria. As a second part of the overall project, the theoretical hydropower (or hydraulic) potential was calculated for the entire river network, which complemnets the spatial assessment. In particular, it is possible to classify river reaches into those that are more suitable for hydropower production (=”use”) and those that are more suitable for protection.

 Material and method
The HYDROpot_Integral method was developed and tested on the basis of cantonal and national data (Hirschi et al. 2013). The method relies on 73 geodata sets. This holistic assessment is the key element of the entire assessment procedure. Its aim is to quantify the importance of the ecosystem functions in terms of services. The river network (GWN07) is divided into reaches of about 450m and for each reach two study units are defined. The river space (RS) records the ecosystem functions of the water body and the nearby riparian area. The length of the RS is 315 m on average in Switzerland and a maximum of 450 m, whereas the width is based on the FOEN definition (BWG 2001: 18f) and varies between 7-107 m. The surrounding landscape (SLS) is the second survey unit that records the ecosystem functions of the surrounding area over a range of 21 m to 321 m. The SLS is calculated over three times the RS width. The length of the SLS is identical to the length of the RS. The ecosystem functions are divided into three types: regulating (service A), cultural (service B) and provisioning (service C) functions. Accordingly, the assessment of the functions is divided into three parts and three values are assigned to each river reach. The more functions there are and the greater their performance, the higher these values are and the more important the corresponding functions are. Hence, these values quantify the importance of the ecosystem functions and the ecological, cultural and economic ecosystem services of each river reach. The concatenation of ecosystem services results in a value (ABC) that can occur in 125 different versions due to the chosen five-level value scale; i.e. each digit of the three-digit number sequence can be assigned a value between 1 and 5. Each of the 125 combinations, and thus each river reach, has its own characteristics determined by the assessments of the three function types. To record the suitability, the combinations are ranked according to their ecological, cultural and economic ecosystem services. These rules mean that the combination that is most suitable for hydropower production at minimum cost in terms of ecological and cultural ecosystem services and has a high economic potential is ranked first; rank 125 indicates the highest ecological and cultural ecosystem services and the lowest economic services and is therefore most suitable for protection. A river reach that is excluded from hydropower use due to legislation, a so-called priority reach, is given rank 126 from the outset and specially marked. A more detailed description of the methods can be found in Hirschi et al. 2013 [Link]. The dataset presented here presents the latest state of the HYDROpot_integral methodology applied at the national level. Only national data that is easily accessible was used in the preparation of the dataset. The cantonal data, such as renaturation and revitalization, would have to be requested by each canton individually and was excluded here. The nationwide value synthesis was made with R.
A list of data sources can be found here [link to text file]
A list of all parameters can be downloaded here [link to PDF and text files]

 Dataset description
Data is presented as a single shapefile. It contains the river network and all assessment results obtained with HYDROpot_Integral.

 Changes in the methodology compared to the original method (Hirschi et. al 2013)

 * RS_A11 Ecomorphology: recorded for the whole of Switzerland and zero values equated with NA;
individual cantons such as Zug and St. Gallen have no mapped values according to the modular
concept of the federal government, Valais and Graubünden only the main valleys, Ticino and Fribourg not
completely (BAFU 2009).
 * RS_A14 Renaturation and revitalization data: not centrally available at the time of data collection.
centrally available, therefore values in GR were equated with NA.
 * RS_A15 Dilution ratio at wastewater treatment plants (WWTPs) for discharges: Zero values
equal to NA.
 * RS_A20 Water flow: use WASTA (2013) with hydroelectric power plants (> 300 kW) under
Federal control and dams serving hydroelectricity (Dam, as of 2013).
 * RS_C05 Synoptic hazard maps: are cantonally managed at the time of data collection,
Values in GR are marked with a 5 so that the systematics in the decision tree is not affected.
is affected.
 * Water quality (RS_A15, RS_A16, RS_A17, RS_A18, RS_A19): for the evaluation of the function type.
A Nature, it is important whether the median of the five values is less than or equal to 3 in total. This
evaluation is based on the decision tree for evaluating GR (Hirschi et al. 2013:22).
Therefore, an evaluation of the station data is made where critical and possible river segments
with poor quality (median less than 3) exist. Only two longer and one short
sections in Switzerland receive a lower median than 3 for water quality.
 * SLS_B06 Visibility: For 99 percent of the river segments (30,733 of 31,062) in the canton of
Bern (2015 reduced version), the landscape area is considered to be visible. Due to this high number
of sections, a large number of viewpoints in the layer of Swisstopo and
the computation time and computability in ArcGIS, the landscape area is classified as generally viewable
(equal to 1).
16 Method
Additional indicators were added (see Appendix B.2):
 * SLS_A21 Dissection
 * SLS_A22 Forest areas
 * SLS_B03 Hiking trails
 * SLS_B10 Residential and vacation homes
 * SLS_B11 Tourist infrastructure
 * SLS_C01 Landfill
 * SLS_C03 Infrastructure
 * SLS_C05 Industry
 * SLS_C06 Agricultural land
Not to be added, although present to some extent:
 * SLS_B06 Cultural assets of national importance: here, too, the calculability of the visibility analysis is
for the whole of Switzerland is limited
 * SLS_A15 Legally binding protection and land use planning: the individual river sections are not
clearly designated, i.e. no geodata exist
The following data are also not supplemented, as they are cantonal data:
 * SLS_A10 Cantonal nature reserves
 * SLS_A16 Forest reserves
 * SLS_A17 Cantonal inventories and contractually protected areas

decision-making

display_name: decision-making

ecosystem-protection

display_name: ecosystem-protection

gis

display_name: gis

hydropower

display_name: hydropower

integral-water-management

display_name: integral-water-management

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


global-cryosphere-watch-data-survey

maintainer: Mathias Bavay

title_for_slug: global-cryosphere-watch-data-survey

en: automatic-publication data-usage data-exchange gcw data-portal

state: active

type: dataset

en: Data interoperability survey

media_type: text/csv

format: CSV

mimetype: text/csv

en: Third party data usage

en: Two surveys on the topic of data usage where conducted for the Global Cryosphere Watch data portal. The first one focused on the data provider point of view while the second one focused on the data user point of view. 37 data providers (ie institutions) worldwide provided their answers for the first survey (from fall 2017 until summer 2018) while 54 users (contacted through various mailing list such as the Cryolist) answered the questions on their third party data usage (fall 2019 until January 2020).

automatic-publication

display_name: automatic-publication

data-exchange

display_name: data-exchange

data-portal

display_name: data-portal

data-usage

display_name: data-usage

gcw

display_name: gcw

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Global Cryosphere Watch data survey


weather-station-klosters

maintainer: Maxime Hervo

title_for_slug: weather-station-klosters

en: precipitation temperature weather wind klosters raclets

en: Weather Station Klosters

media_type: application/zip

en: All in one weather station measuring temperature (°C), humidity (%), wind (m s‾ ¹) and precipitation type. The time format is: number of days from January 0, 0000, UTC.

format: ZIP

mimetype: application/zip

en: A weather station (Lufft WS600) measured meteorological parameters at Klosters (LON: 9.880413, LAT: 46.869019). Detailed information on the specifications can be found [here](https://www.lufft.com/products/compact-weather-sensors-293/ws600-umb-smart-weather-sensor-1832/productAction/outputAsPdf/).

klosters

display_name: klosters

precipitation

display_name: precipitation

raclets

display_name: raclets

temperature

display_name: temperature

weather

display_name: weather

wind

display_name: wind


maintainer: Sofia Pagliarin

en: imperviousness urban-atlas milan barcelona copernicus soil-sealing

media_type: .csv

format: SERVICE

media_type: mpk

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

media_type: CSV

en: Information on data sources

en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas

en: Soil sealing Barcelona and Milan different territorial levels


maintainer: EnviDat Support

en: davos foresty treeline-ecosystems afforestation stillberg mountain-forest

en: Dataset V1

media_type: GDB

en: This dataset has been depricated in favour of an updated version.

format: GDB

en: Site photo

media_type: JPEG

en: Documentation

media_type: application/msword

mimetype: application/msword

en:
#Background Information

A history of many centuries of seasonal livestock grazing of alpine pastures has significantly depressed the treeline in many European mountain ranges. Therefore, observations of treeline patterns are more likely to be obscured by historical land use than in regions with less human influence and might not provide relevant information about environmental factors that influence mortality and growth patterns at the natural high-elevation limit of tree existence. To overcome this, we used a large afforestation experiment in the Swiss Alps, "Stillberg", to address the following questions:

Can trees survive above the current treeline in the European Alps? Are environmental factors that influence spatial patterns of mortality the same as those that influence height growth? Does the relative importance of these environmental variables change over the first 40 years after planting as seedlings?

#Dataset
The 5 ha Stillberg long-term afforestation research area is located near Davos (Central Alps, Switzerland). The bottom of the afforestation is approximately at the current treeline and it covers an altitudinal gradient of more than 150 m (2075 to 2230 m a.s.l.; see picture above). Approximately 92'000 seedlings of three treeline species (Larix decidua, Pinus mugo ssp. uncinata and Pinus cembra) were systematically planted in 1975, and mortality and height growth were closely monitored during the following 40 years.

Publications
Barbeito, I., Dawes, M. A., Rixen, C., Senn, J. and Bebi, P. (2012), Factors driving mortality and growth at treeline: a 30-year experiment of 92 000 conifers. Ecology, 93: 389–401. http://dx.doi.org/10.1890/11-0384.1

afforestation

display_name: afforestation

davos

display_name: davos

foresty

display_name: foresty

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline-ecosystems

display_name: treeline-ecosystems

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Long-term treeline research dataset at Stillberg, Davos


maintainer: Jana von Freyberg

en: snowpack-outflow stable-water-isotopes solutes snowmelt-lysimeter snowmelt-rate

en: The dataset contains volumes, solutes and stable water isotopes of snowpack outflow at daily resolution. 10-minute data are provided of the measurements taken by three snowmelt lysimeter systems at spatially-distributed locations.

format: XLS

en:
This data contain volumes, solutes and isotopes of snowpack outflow measured by a snowmelt lysimeter system at three locations in the southern Alp catchment, situated Central Switzerland. The river Alp is a snow-dominated catchment situated in Central Switzerland characterized by an elevation range from 840 to 1898 m a.s.l.
The dataset provides solutes (major anions and cations, trace metals) and stable water isotopes and water fluxes (snowpack outflow volumes) at daily intervals from several sampling locations. Additionally, the data measured by the snowmelt lysimeter system are provided in 10-minute resolution.

snowmelt-lysimeter

display_name: snowmelt-lysimeter

snowmelt-rate

display_name: snowmelt-rate

snowpack-outflow

display_name: snowpack-outflow

solutes

display_name: solutes

stable-water-isotopes

display_name: stable-water-isotopes

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Daily data of the volumes, solutes and isotopes in snowpack outflow measured at three locations in the southern Alp catchment


en: snow-precipitation precipitation-variability complex-terrain orographic-precipitation cosmo-wrf

en: StationData

en: Snow depth maps over Dischma valley for 26 January 2016 and 9 March 2016 and snow depth differences between the two dates.

en:
The data presented here corresponds to the publication "Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain" (Gerber et al., 2018a), which investigates the precipitation variability of snow precipitation in the central northern part of the Grisons (CH) and the publication "The importance of near-surface winter precipitation processes in complex alpine terrain" (Gerber et al., 2018b). The dataset contains:

* WRFsimulations: WRF simulation output for simulations with 4x (14x) terrain smoothing with an output timestep of 30 min/5 min and horizontal grid spacings of 1350 m, 450 m, 150 m and 50 m (currently: data available upon request).
* StationData: Meteorological station data of 18 meteorological stations in the central northern part of the Grisons with 30 minute resolution for the period 1 January 2016 till 1 May 2016.
* ADS80data: Photogrammetrically determined snow depth distribution data over the Dischma valley for the 26 January 2016 and 9 March 2016. Snow heights are corrected for buildings, vegetation (> 1m), outliers, and pixles, which are obivously snow-free on the pictures (Bühler et al., 2015). In addition the snow depth differences (snow depth on 9 March 2016 minus snow depth on 26 January 2016) are provided.

For more details about the simulation and observation data, see Gerber et al., 2018 and Gerber and Sharma (2018).

Publications:

Bühler, Y., Marty, M., Egli, L., Veitinger, J., Jonas, T., Thee, P., and Ginzler, C.: Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9, 229–243, doi:10.5194/tc-9-229-2015, 2015.

Gerber, F., Besic, N., Sharma, V., Mott, R., Daniels, M., Gabella, M., Berne, A., Germann, U., and Lehning, M.: Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain, The Cryosphere, 12, 3137–3160, doi:10.5194/tc-12-3137-2018, 2018.

Gerber, F., Mott, R. and Lehning, M.: The importance of near-surface winter precipitation processes in complex alpine terrain, Journal of Hydrometeorology, accepted, 2018.

Gerber, F., and Sharma, V.: Running COSMO-WRF on very-high resolution over complex terrain. Laboratory of Cryospheric Sciences CRYOS, École Polytechnique Fédérale de Lausanne EPFL, Lausanne, Switzerland. doi:10.16904/envidat.35, 2018.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

orographic-precipitation

display_name: orographic-precipitation

precipitation-variability

display_name: precipitation-variability

snow-precipitation

display_name: snow-precipitation

en: DISCHMEX - High-resolution WRF simulations in complex alpine terrain and station measurements


restoring-grassland-multifunctionality

title_for_slug: restoring-grassland-multifunctionality

en: soil-biodiversity bacteria ecosystem-multifunctionality nematodes grassland biodiversity plants fungi mineralization restoration

en: Functional diversity above_belowground fauna

media_type: XLSX

en: Please note that EMF, MF.below, MF.abio and Soil.hetero have been corrected.

en: Please note that C.sto and Corg have been corrected.

en:
Please cite this paper together with the citation for the datafile.

Resch, M. C., Schütz, M., Buchmann, N., Frey, B., Graf, U., van der Putten, W. H., Zimmermann, S., Risch, A. C. 2021. Evaluating long-term success in grassland restoration – an ecosystem multifunctionality approach. Ecological Applications 31, e02271.

 Study area

The study was conducted in the Canton of Zurich, Switzerland, in and around two nature reserves Eigental and Altläufe der Glatt (47°27’ to 47°29’ N, 8°37’ to 8°32’ E, 417 to 572 m a.s.l.). All studied grasslands were located with a radius of approximately 4 km. Average monthly temperatures range from 0.7 ± 2.0 °C (January) to 19.0 ± 1.5 °C (July), and monthly precipitation range from 60 ± 42 mm (January) to 118 ± 46 mm (July [maxima]; 1989-2017; MeteoSchweiz 2018). In our study, we focused on semi-dry and semi-wet oligo- to mesotrophic grasslands characterized by high plant species richness and groundwater fluctuations throughout the year (Delarze et al. 2015, see also Resch et al. 2019).

 Experimental design and sampling

A large-scale restoration experiment to expand and reconnect isolated remnants of species-rich grasslands was initiated in the nature reserve Eigental in 1990. Twenty hectares of adjacent intensive grasslands were chosen for restoration. In 1995, three restoration methods of increasing intervention intensities were implemented. The goal of all three methods was to lower the availability of soil nutrients and hence, facilitate ecosystem development towards the targeted nutrient-poor grasslands. These methods were: Harvest only (hay harvest twice a year), Topsoil (removal of the nutrient-rich topsoil), and Topsoil+Propagules (topsoil removal combined with the application of hay from target vegetation). Plant biomass harvest (once a year in late summer/early autumn) commenced in Topsoil and Topsoil+Propagules five years after the soils were removed and is still ongoing today. We measured restoration success by comparing the three restoration methods with intensively managed (Initial) and semi-natural grasslands (Target) 22 years after restoration. Initial grassland sites share the same agricultural history as the restored sites: mowing and subsequent fertilizing (manure) up to five times a year, as well as different tillage regimes (Resch et al. 2019). Target sites were the sites from which hay for seeding the Topsoil+Propagules sites was collected. Soil conditions (i.e., soil types, soil texture) were comparable to those found in the restored grasslands (Resch et al. 2019). Additionally, Target sites were selected to represent a variety of semi-natural grasslands, including semi-dry to semi-wet conditions. In Target grasslands, biomass is harvested once a year in late summer or early autumn. Eleven 5 m x 5 m (25 m2) plots were randomly established in each of the five treatments (in total 55 plots; for a detailed map see Neff et al. 2020). An additional 2 m x 2 m (4 m2) subplot was randomly established at least 2 m away from each 25 m2 plot for destructive sampling. Data sampling took place between June and September 2017.

Vegetation properties

All plant species were identified within the 25 m2 plots (nomenclature: Lauber and Wagner 1996) in mid-June 2017 (in total 250 species). Vegetation structure and plant biomass were assessed diagonally on a transect of 2 m x 10 cm within the 25 m2 plot in early July 2017. We measured the maximum and mean height of the vegetation at the start, middle and end of the transect and calculated the standard deviation of these measures to describe vegetation structural heterogeneity (Schuldt et al. 2019). Thereafter, biomass was clipped on the entire transect to 1 cm height, sorted into five functional groups (graminoids, forbs, legumes, litter, and woody species), dried at 60 °C for 48 h, and weighed (Meyer et al. 2015).

 Aboveground arthropods

Aboveground arthropods were sampled at two locations in each 25 m2 plot in early July 2017 (see also Neff et al. 2020). Briefly, two cylindrical baskets (50 cm diameter, 67 cm height; woven fabric) were thrown simultaneously from outside the plot into two opposite corners. A closable mosquito mesh sleeve was mounted to the top of the baskets and an integrated metal ring at the bottom was fixed to the ground with metal stakes to assure that insects could not escape. A suction sampler (Vortis, Burkhard Manufacturing Co. Ltd., Hertfordshire, England) was then inserted into one of the baskets through the opening of the sleeve and the plot was “vacuumed" twice for 105 seconds with a 30 seconds break. The collected animals were immediately transferred into 70% ethanol. Arthropods were sorted and assigned to 23 taxonomic groups. Holometabolic larvae were lumped into one category while hemimetabolic larvae were grouped separately from adults in the respective taxonomic rank. We used mean values of individuals per plot for total abundance. Aboveground arthropod richness was defined by the number of different taxa to lowest taxonomic level (in total 23 taxa). All taxa were assigned to one of five trophic levels: 1) primary producers, 2) primary consumers, 3) secondary consumers, 4) tertiary consumers, and 5) quaternary consumers.

 Belowground fauna

Sampling of all belowground fauna took place in mid-July 2017. Earthworms were sampled in two 30 cm x 30 cm x 20 cm soil monoliths at two opposite corners of the 25 m2 plot (opposite to aboveground arthropod sampling). The excavated soil monolith was broken by hand, all earthworms collected and immediately transferred in a 4% formaldehyde solution. Thereafter, earthworm individuals were identified to species level (in total 10 taxa; Christian and Zicsi 1999) and species assigned to three functional groups (Bouché 1977).
To assess soil arthropod communities, we randomly collected one undisturbed soil core (5 cm diameter, 12 cm depth) in each 4 m2 subplot with a slide hammer corer lined with a plastic sleeve (AMS Samplers, American Falls, Idaho, USA). Soil arthropods were extracted using Berlese-Tullgren funnels (3 mm mesh), starting the day of sampling and lasting 14 days. Individuals were stored in 70% ethanol. Soil arthropods were assigned to 41 taxonomic groups and 4 feeding types. Holometabolic and hemimetabolic larvae were treated as previously described for aboveground arthropods. Belowground arthropod richness refers to the 41 taxonomic groups.

For soil nematode sampling, we randomly collected eight soil cores of 2.2 cm diameter (Giddings Machine Company, Windsor, CO, USA) within each 4 m2 subplot to a depth of 12 cm. The eight cores were combined, gently homogenized, placed in coolers, kept at 4 °C and transported to the laboratory at NIOO in Wageningen (NL) within one week after collection. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriator (Oostenbrink 1960) and prepared for morphological identification and quantification as described by Resch et al. (2019). Nematodes were identified to family level (39 taxa) according to Bongers (1988), assigned to 17 functional groups, 5 feeding types and 5 colonizer-persister (C-P) classes (Yeates et al. 1993, Bongers 1990, Resch et al. 2019).

We randomly collected two more soil cores (2.2 cm diameter x 12 cm depth) within each 4 m2 subplot to determine soil microbial communities. Again, the soil cores were combined, homogenized, placed in coolers and transported to the laboratory at WSL in Birmensdorf (Switzerland) where the metagenomic DNA was extracted from 8 g sieved soil (2 mm) using the DNeasy PowerMax Soil Kit (Quiagen, Hilden, NRW, GER) according to the manufacturer`s instructions. PCR amplification of the V3-V4 region of the prokaryotic small-subunit (16S) and the ribosomal internal transcribed spacer region (ITS2) of eukaryotes was performed with 1 ng of template DNA utilizing PCR primers and conditions as previously described (Frey et al., 2016). PCRs were run in triplicates and pooled. The pooled amplicons were sent to the Genome Quebec Innovation Centre (Montreal, QC, Canada) for barcoding using the Fluidigm Access Array technology (Fluidigm) and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, CA, USA). Quality filtering, clustering into operational taxonomic units (OTUs) and taxonomic assignment were performed as described by Frey et al. (2016) and Adamczyk et al. (2019). We used a customised pipeline largely based on UPARSE (Edgar 2013) implemented in USEARCH v. 9.2 (Edgar 2010). After discarding singletons of dereplicated sequences, clustering into OTUs with 97% sequence similarity was performed (Edgar 2013). Quality-filtered reads were mapped on the filtered set of centroid sequences. Taxonomic classification of prokaryotic and fungal sequences was conducted querying against most recent versions of SILVA (v.132, Quast et al. 2013) and UNITE (v.8, Nilsson et al. 2018). Only taxonomic assignments with confidence rankings equal or higher than 0.8 were accepted (assignments below 0.8 set to unclassified). Prokaryotic OTUs assigned to mitochondria or chloroplasts as well as eukaryotic OTUs assigned other than fungi were removed prior to data analysis. In addition, prokaryotic and fungal datasets were filtered to discard singletons and doubletons. Thereafter, OTU abundance matrices were rarefied to the lowest number of sequences per community, to normalize the total number of reads and achieve parity between samples (Prokaryota: 29,843 reads; Fungi: 26,690 reads). Finally, prokaryotic and fungal observed richness (number of OTUs) were estimated (Prokaryota: 14,010 OTUs; Fungi: 5,813 OTUs). For prokaryotes, we distinguished five and for fungi six functional types based on lowest taxonomic resolution (Nguyen et al. 2016, Tedersoo et al. 2014). Belowground taxon richness was defined by the total number of earthworm, arthropod, nematode, fungi, and prokaryote taxa assigned to lowest taxonomic level. Finally, all belowground taxa were assigned to the same five trophic levels as the aboveground arthropods.

 Soil chemical and physical properties, soil nitrogen mineralization

We randomly collected three 5 cm diameter x 12 cm depth soil samples in each 4 m2 subplot with a slide hammer corer (AMS Samplers, American Falls, Idaho, USA), pooled them and then made two subsamples. One was field-fresh and stored at 3 °C until analysis, the other was dried for 48 h at 60 °C and passed through a 4 mm mesh. From the dried sample, we measured soil pH potentiometrically in 0.01 M CaCl2 (soil:solution ratio=1:2; 30 minutes equilibration time). Total and organic carbon content were measured on fine-ground samples (≤ 0.5 mm) by dry combustion using a CN analyzer NC 2500 (CE Instruments, Wigan, United Kingdom). Inorganic carbon of samples with a pH > 6.5 was removed with acid vapor prior to analysis of organic carbon (Walthert et al. 2010). We calculated total soil carbon (C) storage after correcting its content for soil depth, stone content and density of fine earth (see below). Exchangeable cations were determined on another 5 g dry soil sample with 50 mL unbuffered 1 M NH4Cl solution (soil:solution ratio=1:10, end-over-end shaker for 1.5 hours) and measured by an ICP-OES (Optima 7300 DV, Perkin-Elmer, Waltham, Massachusetts, USA). Thereafter, cation exchange capacity (CEC) was calculated as the sum of exchangeable cations and protons (and expressed as mmolc per 1 kg soil) and used to describe nutrient retention capacity in our plots. Concentrations of exchangeable protons were calculated as the difference between total and Al-induced exchangeable acidity as determined by the KCl-method (Thomas 1982).

Ammonium (NH4+) and nitrate (NO3−) were extracted from a 20 g fresh subsample with 80 mL 1M KCl for 1.5 hours on an end-over-end shaker and filtered through ashless folded filter paper (DF 5895 150, ALBET LabScience, Hahnemühle FineArt GmbH, Dassel, Germany). NH4+ concentrations were determined colorimetrically by automated flow injection analysis (FIAS 300, Perkin-Elmer, Waltham, Massachusetts, USA). NO3− concentrations were measured colorimetrically according to Norman and Stucki (1981). Potential soil net nitrogen (N) mineralization was assessed during an 8-week incubation period under controlled moisture (60% of field capacity), temperature (20 °C) and light conditions (dark) in the laboratory. We weighed duplicate samples of fresh soil equivalent to 8 g dry soil (24 h at 104 °C) into 50 mL Falcon tubes. Soil samples were extracted for NH4+ and NO3− at the beginning and after eight weeks as described above. Soil net N mineralization was calculated as the difference between the inorganic nitrogen (NH4+ and NO3−) before and after the incubation (Hart et al. 1994), corrected for the total incubation time and represented per day values expressed as mg N kg-1 soil d-1.

To assess soil physical properties, we randomly collected one undisturbed soil core per 4 m2 subplot (5 cm diameter, 12 cm depth) in a steel cylinder that fit into the slide hammer (AMS Samplers, American Falls, Idaho, USA). The cylinder was capped in the field to avoid disturbance. We then measured field capacity in the laboratory. For this purpose, the cylinder and soil therein were saturated in a water bath and drained on a sand/silt-bed with a suction corresponding to 60 cm hydrostatic head. The moist soil was dried at 105 °C to constant weight. Field capacity was calculated by dividing the mass of water by the total mass of wet soil contained at 60 cm hydrostatic head and used to describe water holding capacity. Thereafter, samples were passed through a 4 mm mesh. Fine-earth and skeleton fractions were weighed separately to assess bulk soil density (fine-earth plus skeleton), density of fine earth, and proportion of skeleton. Particle density was determined with the pycnometer method (Blake and Hartge 1986), and total porosity and proportion of fine pores were calculated (Danielson and Sutherland 1986). Clay, silt, and sand contents were quantified with the sediment method (Gee and Bauder 1986).

Surface and soil temperature (12 cm depth, water-resistant digital pocket thermometer; IP65, H-B Instrument, Trappe, Pennsylvania, USA) as well as volumetric soil moisture content (12 cm depth, time domain reflectometry; Field-Scout TDR 300, Spectrum Technologies, Aurora, Illinois, USA) were measured at five random locations within the 4 m2 subplots every month from June to September. We calculated the standard deviation of each temperature and moisture measure over four months to describe seasonal variations. Slope inclination was determined at plot-level via GPS measurements (GPS 1200, Leica Geosystem, Heerbrugg, Switzerland) and categorized into slope gradient classes according to FAO standards (1990). Thickness of the topsoil horizon (equivalent to Ah or Aa horizon) was determined at one soil monolith (30 x 30 x 30 cm3) per 4 m2 subplot in cm and rounded to next integer.

 References

Adamczyk, M., F. Hagedorn, S. Wipf, J. Donhauser, P. Vittoz, C. Rixen, A. Frossard, J. Theurillat, and B. Frey. 2019. The soil microbiome of GLORIA mountain summits in the Swiss Alps. Frontiers in Microbiology 10:1080-1101.

Blake, G.R., and K. H. Hartge. 1986. Particle Density. Pages 377-382 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Bongers, T. 1988. De nematoden van Nederland. Stichting Uitgeverij van de Koniklijke Nederlandse Natuurhistorische Verenigung (KNNV), Utrecht.

Bongers, T. 1990. The maturity index: an ecological measure of environmental disturbance based on nematode species composition. Oecologia 83:14-19.

Bouché, M. B. 1977. Strategies lombriciennes. Ecological Bulletins 25:122-132.

Christian, E., and A. Zicsi. 1999. Ein synoptischer Bestimmungsschlüssel der Regenwürmer Österreichs (Oligochaeta: Lumbricidae). Die Bodenkultur 50:121-131.

Danielson, R. E., and P. L. Sutherland. 1986. Porosity. Pages 443-461 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Delarze, R., Y. Gonseth, S. Eggenberg, and M. Vust. 2015. Lebensräume der Schweiz: Ökologie ‐ Gefährdung ‐ Kennarten, Ott Verlag, Bern.

Edgar, R. C. 2010. Search and clustering orders of magnitude faster than BLAST. Bioinformatics 26:2460–2461.

Edgar, R. C. 2013. UPARSE: highly accurate OTU sequences from microbial amplicon reads. Nature Methods 10:996–998.

FAO. 1990. Guidelines for soil description, third ed. Land and Water Development Division at the Food and Agriculture Organization of the United Nations (FAO), Rome.

Frey, B., T. Rime, M. Phillips, B. Stierli, I. Hajdas, F. Widmer, and M. Hartmann. 2016. Microbial diversity in European alpine permafrost and active layers. FEMS Microbiology Ecology 92:fiw018.

Gee, G.W., and J. W. Bauder. 1986. Particle-size analysis. Pages 383-411 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Hart, S. C, J. M. Stark, E. A. Davidson, and M. K. Firestone. 1994. Nitrogen mineralization, immobilization, and nitrification. Pages 985-1016 in R. W. Weaver, S. Angle, P. Bottomley, D. Bezdicek, S. Smith, A. Tabatabai, and A. Wollum, editors. Methods of soil analysis: Part 2—Microbiological and biochemical properties. Soil Science Society of America (SSSA) Inc., Madison.

Lauber, K., Wagner, G., 1996. Flora Helvetica. Flora der Schweiz. Haupt Verlag, Bern.

MeteoSchweiz, 2018. Klimabulletin Jahr 2017. MeteoSchweiz, Zürich.

Meyer, S. T., C. Koch, and W. W. Weisser. 2015. Towards a standardized rapid ecosystem function assessment (REFA). Trends in Ecology and Evolution 30:390-397.

Neff, F., M. C. Resch, A. Marty, J. Rolley, M. Schütz, A. C. Risch, and M. M. Gossner. 2020. Long-term restoration success of insect herbivore communities in semi-natural grasslands – a functional approach. Ecological Applications 0:e02133

Nguyen, N.H., Z. W. Song, S. T. Bates, S. Branco, L. Tedersoo, J. Menke, J. S. Schilling, and P. G. Kennedy. 2016. FUNGuild: an open annotation tool for parsing fungal community datasets by ecological guild. Fungal Ecology 20:241–248.

Nilsson, R. H., K.-H. Larsson, A. F. S. Taylor, J. Bengtsson-Palme, T. S. Jeppesen, D. Schigel, P. G. Kennedy, K. Picard, F. O. Glöckner, L. Tedersoo, I. Saar, U. Kõljalg, and K. Abarenkov. 2018. The UNITE database for molecular identification of fungi: handling dark taxa and parallel taxonomic classifications. Nucleic Acids Research 47:259–264.

Norman, R. J., and J. W. Stucki. 1981. The Determination of Nitrate and Nitrite in Soil Extracts by Ultraviolet Spectrophotometry. Soil Science Society of America Journal 45:347-353.

Oostenbrink, M. 1960. Estimating nematode populations by some selected methods. Pages 81-101 in J. J. Sasser, and W. R. Jenkins, editors. Nematology. Univ. of North Carolina Press, Chapel Hill.

Quast, C., E. Pruesse, P. Yilmaz, J. Gerken, T. Schweer, P. Yarza, J. Peplies, and F. O. Glöckner. 2013. The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research 41:590-596.

Resch, M. C., M. Schütz, U. Graf, R. Wagenaar, W.H. van der Putten, and A. C. Risch. 2019. Does topsoil removal in grassland restoration benefit both soil nematode and plant communities? Journal of Applied Ecology 56:1782-1793.

Schuldt, A., A. Ebeling, M. Kunz, M. Staab, C. Guimarães-Steinicke, D. Bachmann, N. Buchmann, W. Durka, A. Fichtner, F. Fornoff, W. Härdtle, L. R. Hertzog, A-N. Klein, C. Roscher, J. Schaller, von G. Oheimb, A. Weigelt, W. Weisser, C.Wirth, J. Zhang, H. Bruelheide, and N. Eisenhauer. 2019. Multiple plant diversity components drive consumer communities across ecosystems. Nature Communications 10:1460.

Tedersoo, L., M. Bahram, S. Põlme, U. Kõljalg, N. S. Yorou, R. Wijesundera, L. Villarreal Ruiz, A. M. Vasco-Palacios, P. Q. Thu, A. Suija, M. E. Smith, C. Sharp, E. Saluveer, A. Saitta, M. Rosas, T. Riit, D. Ratkowsky, K. Pritsch, K. Põldmaa, M. Piepenbring, C. Phosri, M. Peterson, K. Parts, K. Pärtel, E. Otsing, E. Nouhra, A. L. Njouonkou, R. H. Nilsson, L. N. Morgado, J. Mayor, T. W. May, L. Majuakim, D. J. Lodge, S. See Lee, K.-H. Larsson, P. Kohout, K. Hosaka, I. Hiiesalu, T. W. Henkel, H. Harend, L.-D. Guo, A. Greslebin, G. Grelet, J. Geml, G. Gates, W. Dunstan, C. Dunk, R. Frenkhan, L. Dearnaley, A. De Kesel, T. Dang, X. Chen, F. Buegger, F. Q. Brearley, G. Bonito, S. Anslan, S. Abell, and K. Abarenkov. 2014. Global diversity and geography of soil fungi. Science 346:1256688.

Thomas, G.W. 1982. Exchangeable cations. Pages 159-165 in A. L. Page, R. H. Miller, and D. R. Keeney, editors. Methods of Soil Analysis: Part 2—Chemical and microbiological properties. Soil Science Society of America (SSSA) Inc., Madison.

Walthert, L., U. Graf, A. Kammer, J. Luster, D. Pezzotta, S. Zimmermann, and F. Hagedorn. 2010. Determination of organic and inorganic carbon, δ13C, and nitrogen in soils containing carbonates after acid fumigation with HCl. Journal of Plant Nutrition and Soil Sciences 173:207-216.

Yeates, G. W., T. Bongers, R. G. M. de Goede, D. W. Freckman, and S. S. Georgieva. 1993. Feeding habits in soil nematode families and genera – an outline for soil ecologists. Journal of Nematology 25:315-331.

bacteria

display_name: bacteria

biodiversity

display_name: biodiversity

ecosystem-multifunctionality

display_name: ecosystem-multifunctionality

fungi

display_name: fungi

grassland

display_name: grassland

mineralization

display_name: mineralization

nematodes

display_name: nematodes

plants

display_name: plants

restoration

display_name: restoration

soil-biodiversity

display_name: soil-biodiversity

en: Restoring grassland multifunctionality


en: population-genetics multilocus-genotypes biological-control simple-sequence-repeats drosophila-suzukii switzerland trichopria-drosophilae nuclear-microsatellite-markers

en: Table comprising all pertinent information for multiplex PCRs of species-specific nuclear microsatellite makers for Trichopria drosophilae, comprising all 21 newly developed markers, details on full sequences with GenBank accession numbers, primer sequences (including labeling and pig-tails), and repeat motives. PCRs with respective annealing temperatures (AnnealingTemp) refer to Type-It Multiplex PCR Kit (Qiagen, Hilden, Germany).

en: Multilocus genotypes (biallelic coding for 21 nuclear microsatellites) of Trichopria drosophilae described in Gugerli et al. Agrarforschung Schweiz 2019. Missing data denoted as '999'. Population codes (PopNo) are the following: 1, Vezia; 3, Contone ; 5, Davesco; 6, Corteglia; 7, Mezzana; 8, Stabio; 9, Gordola; 10, Sementina; 12, Brusata di Novazzano; 14, Monteggio; 16, Giubiasco; 17, ComoBP; 18, VD; 19, Weil_D; 20, Dossenheim; 21, BioPlanet_Como. Coordinates (CoordCH_E, CoordCH_N) refer to the Swiss coordinates system CH1903.

en:
 Nuclear microsatellite markers and genotype data for _Trichopria ddrosophilae_

This data set comprises (i) the characteristics of a set of 21 species-specific nuclear microsatellites for PCR amplification in _Trichopria drosophilae_ (ii) and genotype data for samples collected in southern Switzerland (Canton of Ticino), with few reference samples from Canton of Vaud, southern Germany, and northern Italy (lab-reared population).
Markers were developed by Ecogenics GmbH, Balgach (Switzerland), using MiSeq Nano 2x250 v2 format (on a mix of 10 individuals). Multiplex PCR assays for multilocus genotyping were established by Ecological Genetics (WSL Birmensdorf), and population genetic analyses are found in Gugerli et al., Agrarforschung Schweiz 2019.

biological-control

display_name: biological-control

drosophila-suzukii

display_name: drosophila-suzukii

multilocus-genotypes

display_name: multilocus-genotypes

nuclear-microsatellite-markers

display_name: nuclear-microsatellite-markers

population-genetics

display_name: population-genetics

simple-sequence-repeats

display_name: simple-sequence-repeats

switzerland

display_name: switzerland

trichopria-drosophilae

display_name: trichopria-drosophilae

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Nuclear microsatellite markers for Trichopria drosophilae, parasitoid wasp on Drosophila suzukii


maintainer: Axel Volkwein

en: field-tests mass-movements experiments field-data field-test natural-hazards experiment rockfall trajectory

en: Block trajectories recorded from local positioning system

media_type: ascii, tab separated, also as Excel table

en: This file contains more than 80 rockfall trajectories projected onto the terrain, i.e. the positions of the single blocks over time during the single tests that were recorded by the local positioning system with about 10Hz. It contains the detected positions as well as a smoothened path (see Volkwein et al., Geosciences, 2018). The table also contains the derived velocities and accelerations along the slope (attention: these accelerations are the once that occur during an impact).

en: Overview of all tests

media_type: ZIP

en:
This table gives an overview on all tests performed including
- block used
- start & end position
- number of jumps
- etc.
-

en: Jumps and impacts

media_type: ascii, tab separated, also as excel table

en: This table contains data of more than 2200 of each jumps and impacts of the test blocks on a grassy slope. It gives there durations in combination with acting accerlartions and the rotational speed of the blocks. The data were retrieved using the block internal accelerometer and rotation sensors. The combination of these data with the measurement from the local positioning system allows the deduction of jump lengths, slope gradient etc.

en: These data contain the point clouds obtained from laser scanning the test slope and the six test blocks used for the experiments. The coordinates of the slope are given in CH-1903 format. The coordinates of the block point clouds are kept in a lokal x/y/z coordinate system.

en:
In summer 2014, 6 rock blocks between 20 and 80kg have been thrown in total 111 times down a slope at the Swiss Oberalppass close to the village Tschamut. The slope was mainly covered by grass and its lower part was flat and large enough to provide natural runouts of the single trajectories.

An extensive measurement program has been set up to measure the block trajectories: With surveyor's instruments the slope and the six used rock blocks were scanned and the start and end positions of each test were recorded. During the single events two cameras filmed the trajectories. A special sensor device located within the blocks recorded the acting accelerations and rotational speeds over time. Further, the device emitted a Wifi signal that got detected from eight receivers around the slope. Based on this signal the block position has been recorded over time.

The dataset contains all data that were gathered through above field campaign.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

mass-movements

display_name: mass-movements

natural-hazards

display_name: natural-hazards

rockfall

display_name: rockfall

trajectory

display_name: trajectory

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Repetitive trajectory testing in Tschamut 2014


sensitivity-of-modeled-snow-instability

maintainer: Bettina Richter

title_for_slug: sensitivity-of-modeled-snow-instability

en: snow-cover-modeling numerical-avalanche-forecasting snow-instability global-sensitivity-analysis snowpack

en: Case SL

en: Extracted output data for case SL. Here biases were introduced to meteorological input data during the period of slab formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Manually observed snow profiles

en: Manually observed snow profiles at Weissfluhjoch field site for winter season 2016-2017, including layer depth, hand hardness, grain size and grain shape for each layer.

en: Reference run

en: Reference run for the sensitivity analysis at Weissfluhjoch field site for winter season 2016-2017. Meteorological data from the automatic weather stations are used. No biases were introduced to the input data.

en: Case WL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the period of weak layer formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Case ALL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the whole simulation period. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: We investigated the sensitivity of modeled snow instability to meteorological input data using SNOWPACK. We therefore used input data from the automatic weather station at the Weissfluhjoch field site for the year 2016-2017. We investigated three scenarios and performed 14'000 simulations for each scenario. The dataset contains extracted output data from modeled SNOWPACK simulations, including setup files to reproduce the simulations. For further information read the README file.

global-sensitivity-analysis

display_name: global-sensitivity-analysis

numerical-avalanche-forecasting

display_name: numerical-avalanche-forecasting

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

snowpack

display_name: snowpack

en: Sensitivity of modeled snow instability


maintainer: Tessa Hegetschweiler

en: adolescents recreational-activities childhood teenagers forest

en: Dataset comments

en: The codebook to the dataset

en: Questionnaire school survey

media_type: application/pdf

en: The questionnaire used in the survey at 8 schools aimed at teenagers in German.

format: PDF

mimetype: application/pdf

en: Dataset survey at schools

en: The dataset of the questionnaire survey at schools in excel format.

en: Survey at schools 2017

en: The dataset of the questionnaire survey at schools in SPSS-format.

en: The data results from a questionnaire survey conducted at 8 schools in the cantons Zurich, Aargau and St. Gallen. Respondents aged 13-22 years. The aim of the survey was to gain insight into teenagers' relationship to the forest, reasons for visiting or not visiting the forest and activities in the forest.

adolescents

display_name: adolescents

childhood

display_name: childhood

forest

display_name: forest

recreational-activities

display_name: recreational-activities

teenagers

display_name: teenagers

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Factors influencing teenagers' forest visit frequency


soil-respiration-exclosure-experiment

title_for_slug: soil-respiration-exclosure-experiment

en: grazing soil-respiration subalpine ungulates grassland

en: Soil respiration Switzerland

en:
ID: Fence number

Year	:Year of sampling

mean.CO2: soil respiration measured with PP-systems SRC-1 soil respriation chamber attached to a EGM-4 infrared gas analyser; units CO2 g m-2 h-1

Grassland: Grasslands where fences were errected. Note that on large grasslands (STAB, GRIM, MING) 2 pairs of fences were errected (2 in short, 2 in tall-grass vegetation), on small grasslands (DADA, MARG, BOTS) only one pair of fences was errected (1 short-grass; one-tallgrass vegetation)

Fence: Fence number; un-even numbers on short-grass vegetation (1,3,5,7,9,11,13,15,17), even numbers on tall-grass vegetation (2,4,6,8,10,12,14,16,18)

Vegetation:	1 = shortgrass vegetation, 2 = tall-grass vegetation (9 replicate fences on each vegetation type)

Treatment	: 1 = all herbivores grazing, 2 = large ungulates (red deer, chamois) excluded

en:
Location of data collection
The Swiss National Park (SNP) is located in the southeastern part of Switzerland, and covers an area of 170 km2, 50 km2 of which is forested, 33 km2 is occupied by alpine and 3 km2 by subalpine grasslands. Elevations range from 1350 to 3170 m a.s.l., and mean annual precipitation and temperature are 871 mm and 0.6°C measured at the Park’s weather station in Buffalora (1980 m a.s.l.) between 1960 and 2009 (MeteoSchweiz 2011). Founded in 1914, the SNP received minimal human disturbance for almost 100 years (no hunting, fishing, or camping, visitors are not allowed to leave the trails). Large (> 1 ha) homogeneous patches of short- and tall-grass vegetation characterize the subalpine grasslands. The average vegetation height of short-grass vegetation is 2 to 5 cm. Red fescue (Festuca rubra L.), quaking grass (Briza media L.) and common bent grass (Agrostis tenuis Sipthrob) are the predominating plant species in this vegetation type. Tussocks of evergreen sedge (Carex sempervirens Vill.) and mat grass (Nardus stricta L.) are predominant in the tall-grass vegetation, which averages 20 cm in vegetation height (Schütz and others 2006). Short-grass vegetation developed in areas where cattle and sheep rested (high nutrient input) during agricultural land-use (from 14th century until 1914); tall-grass vegetation developed in areas where cattle and sheep used to graze, but did not rest (Schütz and others 2003, 2006). Herbivores were shown to consume > 60% of the biomass in short-grass compared to < 20% in tall-grass vegetation (Schütz and others 2006). The herbivore community present in the SNP can be divided into four groups based on body size/weight: large [red deer (Cervus elaphus L.) and chamois (Rupricapra rupricapra L.); 30 - 150 kg], medium [marmot (Marmota marmota L.) and snow hare (Lepus timidus L.); 3 – 6 kg], and small vertebrate herbivores (small rodents: e.g. Clethrionomys spp., Microtus spp., Apodemus spp.; 30 – 100 g) as well as invertebrates (e.g. grasshoppers, caterpillars, cicadas, < 5 g).

Experimental design
We selected 18 subalpine grassland sites (9 short-grass, 9 tall-grass vegetation). The sites were spread across the entire park on dolomite parent material at altitudes of 1975 to 2300 meters. At each site we established an exclosure network (fences) in spring 2009 (early June), immediately after snowmelt. Each exclosure network consisted of a total of five 2 × 3 m sized plots that progressively excluded the different herbivores listed above (further labeled according to the herbivore guilds that had access to the respective plots “All”, “Marmot/Mice/Invertebrates”, “Mice/Invertebrates”, “Invertebrates”, “None”). The “All” treatment was thus accessible to all herbivores, was not fenced and was located at least 5 m away from a 2.1 m tall and 7 × 9 m main fence that enclosed the other four treatments. This fence was constructed of 10 × 10 cm wooden posts and electrical equestrian tape (AGRARO ECO, Landi, Bern, Switzerland; 20 mm width) mounted at 0.7 m, 0.95 m, 1.2 m, 1.5 m and 2.1 m above the ground that were connected to a solar charged battery (AGRARO Sunpower S250, Landi, Bern, Switzerland). We also mounted non-electrically charged equestrian tape at 0.5 m to help exclude deer and chamois, yet allow marmots and hares to enter safely. Within each main fenced area we randomly established four 2 × 3 m plots: (1) The “Marmot/Mice/Invertebrates” plot remained unfenced, thus, with the exception of red deer and chamois, all herbivores were able to access the plot, (2) The “Mice/Invertebrates” plot consisted of a 90 cm high electric sheep fence (AGRARO Weidezaunnetz ECO, Landi, Bern, Switzerland; mesh size 10 × 10 cm) connected to the solar panel and excluded all medium sized mammals (marmots, hares), but provided access for small mammals and invertebrates, (3) The “Invertebrates” plot provided access for invertebrates only and was surrounded by 1 m high metal mesh (Hortima AG, Hausen, Schweiz; mesh size 2 × 2 cm), (4) The “None” plot was surrounded by a 1 m tall mosquito net (Sala Ferramenta AG, Biasca, Switzerland; mesh size 1.5 × 2 mm) to exclude all herbivores. This plot was covered with a roof constructed of a wooden frame lined with mosquito mesh that was mounted on the wooden corner posts. We also treated this plot with a biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) when needed to remove insects that might have entered during data collection or that hatched from the soil.

!!! The here published data set only contains data for “All”, and “Marmot/Mice/Invertebrates” (= ungulates excluded) plots !!!

Data collection
In-situ soil CO2 emissions were measured with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA) on two randomly selected locations on one subplot within each of the 90 plots. For each measurement the soil chamber (15 cm high; 10 cm diameter) was placed on a permanently installed PVC collar (10 cm diameter) driven five centimeters into the soil at the beginning of the study (June 2009). The measurements were conducted between 0900 and 1700 hours every two weeks from early to early September 2009, 2010, 2011 and 2013. Freshly germinated plants growing within the PVC collars were removed prior to each measurement to avoid measuring plant respiration/photosynthesis. The two measurements collected per plot every two weeks were averaged.

Please acknowledge the funding of the study: funded by the Swiss National Science Foundation, SNF grant-no 31003A_122009/1 to Anita C. Risch, Martin Schütz and Flurin Filli

grassland

display_name: grassland

grazing

display_name: grazing

soil-respiration

display_name: soil-respiration

subalpine

display_name: subalpine

ungulates

display_name: ungulates

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Soil respiration - exclosure experiment


en: land-use-simulations spatial-planning land-use-transformations digital-zoning-plans land-use-change

media_type: ascii x, y, z

en: Legend simulated maps

en:
Table of Content: 1. General context of the data set "LUSzoning”; 2. Background and aims of the study using the data set LUSzoning; 3. The data set LUSzoning.
1. General context of the data set "LUSzoning".
The data set "LUSzoning" stands for Land-use simulations integrating zoning regulations in Spanish functional urban areas. The data set has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2021. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, digital zoning plans) into quantitative land-change modelling approaches at the urban regional level.
2.	Background and aims of the study using the data set “LUSzoning”.
As part of the CONCUR project, a specific task was to integrate planning spatial policies in land-change modelling. Planning can be implemented in modelling using either hard or gradual restrictions. Different studies have addressed the inclusion of spatial planning policies in land-use change modelling. However, the integration of zoning constraints is generally established as hard or Boolean-based restrictions (e.g., whether urban development is allowed or not), while not accounting for the spatial heterogeneity or gradual characteristics within planning zones (e.g., whether planning regulations allow low, medium or high urban density), though these could improve real patterns simulations in urban areas. We assume Spanish General Zoning plans were suitable to explore the integration of planning into land-change modelling as soft constrains because they define land-use intensities in the buildable zoning areas. In light of the above considerations, the overall aim of the study was to model urban land-use changes using a multi-scenario approach that integrates digitized zoning plans for the Functional Urban Areas (FUAs) of Madrid, Barcelona, Valencia, and Zaragoza. The following specific objectives were addressed: i) to analyse the role of planning by defining three future scenarios that integrate digitized zoning plans and one scenario that assumes almost no planning intervention; ii) to introduce zoning constraints that reflect different degrees of urban densities; iii) to generate a transferable spatially-explicit modelling framework to integrate planning into land-use change simulations.
Four future land-use demands scenarios were defined for the FUAs. Storylines were created considering probable development scenarios related to zoning plans, current Spanish legislation and sustainability goals defined along two axes: a high market-oriented vs. high planning-intervention axis, and an axis of short-term economic growth vs. long-term sustainable growth. The sustainable development scenario (S1) is characterized by low gross floor area (GFA) growth that is limited to areas that are currently under development according to zoning plans. The business-as-usual scenario (S2) is characterized by medium GFA growth in the range of on-going trends. The strong development scenario (S3) is characterized by high GFA growth rates. Growth is restricted to buildable areas without urbanization project designated in zoning plans. The unrestricted development scenario (S4) prioritizes a high degree of market liberalization characterized by high GFA growth that surpasses population demands. S4 follows a rapid economic growth pattern with almost no planning intervention.
3.	 The data set “LUSzoning”.
The dataset includes 16 .asc raster layers providing the simulated land-uses under four defined scenarios for Barcelona, Madrid, Valencia and Zaragoza Functional Urban Areas (FUAs) for 2030. The simulated raster layers were created using CLUMondo simulation framework and have a spatial resolution of 30m. The .asc layers name include the name of the FUA and scenario number. For example, the output from simulating the urban growth for the city of Zaragoza under Scenario 2 is named “Zaragoza_S2.tif”. Furthermore, a .txt file named “Legend.txt” includes the numeric value of the land-use and the category of land-use that represents to interpret the .asc raster layers. The name of the land-use classes is a reclassification of the Urban Atlas 2012 land-use classes within the four Spanish FUAs analyzed.

digital-zoning-plans

display_name: digital-zoning-plans

land-use-change

display_name: land-use-change

land-use-simulations

display_name: land-use-simulations

land-use-transformations

display_name: land-use-transformations

spatial-planning

display_name: spatial-planning

en: LUSzoning: Land-use simulations integrating zoning regulations in Spanish functional urban areas


en: aerosol raclets ice-nucleation backward-trajectories clouds

en: This dataset contains number concentrations of ice-nucleating particles active at -15 °C observed at Weissfluhjoch during February and March 2019, as well as complementary data (measured aerosol number concentrations and modelled total precipitation along air mass trajectories). This data formed the basis of our paper with the title “Towards parameterising atmospheric concentrations of ice-nucleating particles active at moderate supercooling”.

aerosol

display_name: aerosol

backward-trajectories

display_name: backward-trajectories

clouds

display_name: clouds

ice-nucleation

display_name: ice-nucleation

raclets

display_name: raclets

en: Ice nucleating particle concentrations active at -15 °C at Weissfluhjoch


en: snow-stability-evaluation avalanche-forecast snow avalanche snowpack

en: SNOWPACK simulations

en: This dataset contains all SNOWPACK simulations, including input files, setup and output files.

en: README

media_type: text/plain

en: README file explaining data structure and content

format: TXT

mimetype: text/plain

en: Extracted data

en: Extracted data contain validation and results published in Richter et al. (2019).

en: Stability tests

en: Stability tests including csv-files with CT, ECT and PST experiments for each year and each field site.

en: Manually observed snow profiles

en: Manually observed snow profiles as csv-files containing depth [cm], thickness [cm], density [kg m-3], hand hardness, first grain type, second grain type, first grain size [mm], and second grain size [mm] of each layer.

en:
To validate the critical crack length as implemented in the snow cover model SNOWPACK, PST experiments were conducted for three winter seasons (2015-2017) at two field site above Davos, Switzerland. This dataset contains manually observed snow profiles and stability tests. Furthermore, corresponding SNOWPACK simulations are included.
These data were analyzed and results were published in Richter et al. (2019).

Please refer to the Readme file for further details on the data.

These data are the basis of the following publication:
Richter, B., Schweizer, J., Rotach, M. W., and van Herwijnen, A.: Validating modeled critical crack length for crack propagation in the snow cover model SNOWPACK, The Cryosphere, 13, 3353–3366, https://doi.org/10.5194/tc-13-3353-2019, 2019.

avalanche

display_name: avalanche

avalanche-forecast

display_name: avalanche-forecast

snow

display_name: snow

snow-stability-evaluation

display_name: snow-stability-evaluation

snowpack

display_name: snowpack

en: Validating and improving the critical crack length in SNOWPACK


en: photovoltaic shortwave-radiation winter-energy-production snow albedo

en: Data Forward Scattering

media_type: .zip

en: GROUNDEYE model for multiple forward scattering in snow-covered terrain. Meteorological and topographical input data set for the Meierhofertäli near Davos, Switzerland, September 2017 - August 2018. Output data for September 2017 - August 2018 at hourly resolution and every pixel. Post-processing scripts for plotting and analysis.

en:
 Overview
We present GROUNDEYE, a new model of radiative transfer over mountainous terrain, which considers for the first time the forward scattering properties of snow.
Embedded in the surface process model Alpine3D, the new terrain radiation model GROUNDEYE receives interpolated real weather data with diffuse and direct broadband shortwave radiation for each pixel as well as a spatially variable plane albedo from the module SNOWPACK.

 Format
The GROUNDEYE model is written in c++, as is the entire environment of Alpine3d. The input and output data sets are .xlsx or .txt format, pre- and postprocessing including the generation of all figures is in .R format.

 Structure
In Data_Forward_Scattering.zip you will find all necessary data and model details to
reproduce the results of the JGR publication "How forward-scattering snow and terrain change the Alpine radiation balance with application to solar panels"

 - 	Model Input Data contains the meteorological and topographic input data sets, the BRDF, and preprocessing scripts.
 - Model Code contains the full model Alpine3d including the radiative transfer module GROUNDEYE.
 - Model Output Data contains the results of the simulation of terrain irradiance and irradiance of solar panels; hourly resolution, 1. Sptember 2017 - 31. August 2018.
 - Measurements Solar Testsite contains information and measurements of the solar testsite at the Totalp near Davos, Switzerland.
 - Postprocessing contains all R-Scripts used for the analysis and
plotting of the corresponding data.

In each of these folders you will find detailed information in
the file 'About this Folder.txt'.

albedo

display_name: albedo

photovoltaic

display_name: photovoltaic

shortwave-radiation

display_name: shortwave-radiation

winter-energy-production

display_name: winter-energy-production

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data, Code Link and Metadata on Forward Scattering of Snow at Totalp


en: terrestiral-laserscanning antarctica depth-of-snowfall terrestrial-laser-scans gridded-data

en: Scan from 21 December 2018, 1 mm resolution

en: Scan from 21 December 2018, 10 cm resolution

en: Scan from 11 January 2019, 1 mm resolution

en: Scan from 11 January 2019, 10 cm resolution

en: Scan from 2 January 2019, 10 cm resolution

en: Scan from 27 December 2018, 1 mm resolution

en: Scan from 4 January 2019, 1 mm resolution

en: Scan from 27 December 2018, 10 cm resolution

en: Scan from 4 January 2019, 10 cm resolution

en: Scan from 2 January 2019, 1 mm resolution

en:
Surface topography maps (spatial extent: 400 m x 400 m) obtained at approximately 300 m from the top of the Hammarryggen Ice Rise in Dronning Maud Land, East Antarctica, using a Riegl VZ-6000 Terrestrial Laser Scanner (TLS). Scans were obtained on 5 days in the 2018-2019 Austral summer: on December 21 and 27, and January 2, 4 and 11. By using reflectors installed on bamboo poles, scans were registered with respect to the reflectors, such that the difference between two successive scans reveals the spatial patterns of erosion and deposition of snow. On each scan day, we used multiple scan positions to create one combined point cloud. After applying an octree filter on the point cloud, a 3D surface was obtained. For each day, the dataset contains a 1 mm and a 10 cm octree filter resolution file, only including points in a 400 m x 400 m area centered around the scan positions.

Notes:

* All files in the dataset are in the same coordinate system. However, this coordinate system is arbitrary (i.e., not related to any global coordinate system).

* From the installed reflectors, 4 reflectors could be used over the full period. The scan accuracy is generally higher within the area enclosed by the reflectors.

* The scans from January 2 were found to have exhibited small tilt during the scan and are of lesser accuracy.

* By walking along fixed corridors, disturbance of the snow was limited.

antarctica

display_name: antarctica

depth-of-snowfall

display_name: depth-of-snowfall

gridded-data

display_name: gridded-data

terrestiral-laserscanning

display_name: terrestiral-laserscanning

terrestrial-laser-scans

display_name: terrestrial-laser-scans

en: Terrestrial laser scans on Hammarryggen Ice Rise, Dronning Maud Land, East Antarctica


en: anemometer wind-speed raclets wind-velocity wind wind-direction

en: Sonic wind component v

media_type: npy

en:
The data contains values for v direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component w

en:
The data contains values for w direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component u

en:
The data contains values for u direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic temperature

en: The data set contains values of temperature (°C) measured with the anemometer at a sampling frequency of 20 Hz.

en: Sonic time

en: The data set contains the time in YYYY-mm-dd HH:MM:SS.sss for the anemometer data. The time is given in UTC+1.

en: A Young 81000 sonic anemomenter was deployed at Gotschnagrat (LON: 46.859 LAT: 9.849) to record three components of the wind velocity (u, v, w in [m s‾ ¹]) and air temperature (Ts in [°C]). The anemomenter was mounted in direction North at a height of 1.5 m above snow surface at the beginning. The time within each data set is given in UTC+1. Instrument specifications can be found [here](http://www.youngusa.com/Manuals/81000-90(I).pdf) .

anemometer

display_name: anemometer

wind

display_name: wind

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

wind-velocity

display_name: wind-velocity

education

en: Education and science

en: Snow Drift Station - 3D Ultrasonic


en: COST European Snow Booklet (ESB) - DORA Link

media_type: HTML

en: DORA Link of the COST European Snow Booklet (ESB).

format: HTML

en: COST European Snow Booklet (ESB)

en: Please find here the web version of the COST European Snow Booklet (ESB).

en: European Snow Booklet unpublished metadata

en: The entire station metadata of all European institutions that contributed data is stored in METADATA_unpublished.xlsx. This file, however, cannot be accessed, since not all institutions gave permission to publish their station metadata. If you wish to access the metadata, please send a request to marty@slf.ch stating clearly why you want to access these metadata. NOTE: in this file ONLY station metadata (Lat/Lon/Altitude) is given, NO measured snow depth data.

en: List of authors and list of the editorial board of the European Snow Booklet

en:
Here you can find the list of all lead authors of the different chapters of the European Snow Booklet (ESB).
In addition a list of the editorial board that reviewed the ESB is given.

en: European Snow Booklet public metadata

en:
The core of the European Snow Booklet (ESB), the country reports of 38 European countries, are based on information and metadata on snow measurements collected through a comprehensive survey, the ESB Questionnaire, between August 2017 and March 2018. The station metadata (for example location, elevation, measurement start date) from each country was provided by one or several institutions responsible for snow observations. By answering the questionnaire the contacts agreed that the information and metadata provided could be presented in the ESB. For cases where institutions indicated that information on station locations could be made publicly available, the metadata for the variables snow depth (HS), depth of snowfall (HN) and water equivalent of the snow cover (SWE), is additionally provided here for download (METADATA.xlsx).
Please note that not all institutions gave permission to publish their station metadata. This metadata has to be requested from the non-personal institution contacts provided in the METADATA.xlsx file. In some cases, however, no institutional contact is available and thus the contact of the country representative who filled in the questionnaire is used.
For current, updated station metadata we refer to the (non-personal) institutional contacts provided in METADATA.xlsx and/or the institution webpages. Note, however, that we cannot guarantee for completeness of the dataset for all countries because operational networks are prone to changes.

en:
The European Snow Booklet (ESB) is a book of reference for snow measurements that has been produced through collaboration with many European snow practitioners and snow scientists in the framework of the European Cooperation in Science and Technology (COST) Action ES1404 “A European network for a harmonised monitoring of snow for the benefit of climate change scenarios, hydrology and numerical weather prediction (HarmoSnow)”. The ESB provides a unique collection of information about operational snow observations in the European countries and the methods used to perform basic measurements of snow on the ground: snow depth (HS), depth of snowfall (HN), water equivalent of the snow cover (SWE) and presence of snow on the ground (PSG). Information and station metadata (for example location, elevation) for these basic snow variables were collected through a comprehensive survey, the ESB questionnaire between August 2017 and March 2018. Numerous institutions of 38 European countries provided detailed information describing the status of the operational snow observations and the methods used at the time of the survey. Based on the information provided, a country report was written for each European country. Similarities and differences among the countries, that is, the choice of snow variables to be measured, the measurement principles applied, the number of stations, or the spatial and elevational station distribution are pointed out. Thus the collection of country reports demonstrates the relevance of snow measurements for each country. Thus, the intention of the ESB is to foster better knowledge transfer regarding snow measurements between the snow science and operational communities and to improve the communication of information to the general public.

For detailed information on the European countries, we refer to the ESB, which can be downloaded here (envidat.ch). Please note that the ESB is not a living document and information and station metadata are from August 2017 till March 2018, except for Latvia (metadata updated in December 2018).

harmonisation-of-snow-measurements

display_name: harmonisation-of-snow-measurements

snow-depth

display_name: snow-depth

snow-measurement-methods

display_name: snow-measurement-methods

water-equivalent-of-the-snow-cover

display_name: water-equivalent-of-the-snow-cover

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: European Snow Booklet – an Inventory of Snow Measurements in Europe


maintainer: Leo Gallus Bont

en: geoprocessing openstreetmap seilaplan accessible-forest forest qgis

en: Railways vector data (close to the sample forest range)

media_type: application/zip

en: Juypter Notebook for Data Preparation (online)

media_type: ipynb

en: Digitised sample perimeter

en: Power lines vector data (close to the area of the sample forest range)

en: Preview

media_type: image/png

format: PNG

mimetype: image/png

en: Forest vector data (for sample forest range)

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en: Juypter Notebook for Data Preparation

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

forest

display_name: forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019


en: pattern-formation numerical-model python vapor-transport snow

en:
Data and code v1.0 downloaded from the git.

Running the code requires an installation of FEniCS via docker.

en:
This python code uses the Finite Element library FEniCS (via docker) to solve the one dimensional partial differential equations for heat and mass transfer in snow. The results are written in vtk format.

The dataset contains the code and the output data to reproduce the key Figure 5 from the related publication:

_Schürholt, K., Kowalski, J., Löwe, H.; Elements of future snowpack modeling - Part 1: A physical
instability arising from the non-linear coupling of transport and phase changes, The Cryosphere, 2022_

The code and potential updates can be accessed directly through git via:

https://gitlabext.wsl.ch/snow-physics/snowmodel_fenics

numerical-model

display_name: numerical-model

pattern-formation

display_name: pattern-formation

python

display_name: python

snow

display_name: snow

vapor-transport

display_name: vapor-transport

education

en: Education and science

en: A numerical solver for heat and mass transport in snow based on FEniCS