maintainer: Francesco Comola

en: sediment sand cohesion wind saltation snow

en: Output of the model simulations

en: Model results on granular splash and saltation process of sand and snow particles

en:
The wind-driven saltation of sand and snow shapes dunes and ripples, generates dust emission, and erodes the surface of the Antarctic ice sheet. Here, we use a model based on the discrete element method to simulate grain-flow interactions and study the effect of particle cohesion on saltation dynamics.

The data contains the model output of granular splash simulations and saltation simulations. Granular splash, the main particle entrainment process in saltation, occurs upon impact of saltating particles with the granular bed. We performed Monte Carlo simulations of granular splash for loose sand grains and for cohesive ice grains. The analysis indicate that different values of cohesion have significant effects not on the number of splashed grains, on the ejection velocity, and the rebound velocity.

In our saltation simulations, we trigger particle movement with a single splash event at the inlet section section and let the system evolve until steady state. Our results show that saltation over cohesive surfaces is difficult to initiate but easy to sustain at low wind speed. The occurrence of transport thus depends on the history of the wind speed, a phenomenon known as hysteresis. We also show that saltation over cohesive surfaces presents higher mass fluxes but requires longer distances to saturate, which increases the size of the smallest stable surface ripples. Our model results have implications for large-scale aeolian processes on Earth and Titan, where sand grains are thought to be very cohesive.

cohesion

display_name: cohesion

saltation

display_name: saltation

sand

display_name: sand

sediment

display_name: sediment

snow

display_name: snow

wind

display_name: wind

en: Saltation of cohesive granular materials


en: grain-size ecological-indicator-values taxonomic-diversity soil phylogenetic-diversity functional-diversity climate

state: active

type: dataset

en: Data access

media_type: ZIP

format: ZIP

en:
This dataset comprises a large array of ecological data for the European Alps:

  (1) Current soil and climate predictors at various resolutions.
  (2) GBIF observations of the European Alps Flora (~4,000 species).
  (3) Species habitat suitability maps (1,109 species; based on species observations filtered at 40x40-km)
  at various resolutions used in the study to generate (4); except 'expert'...
  (4) Expert, Taxonomic, phylogenetic and functional diversity of the study region at various resolutions
  (from 100-m to 40-km --> 100-m aggregated & mean to km + non-aggregated/predicted) for CLIM,
  SOIL and CLIM-SOIL models.
  (5) Ecological and altitudinal preferences of the European Alps Flora.
  (6) Data outputs of the related published article.
  (7) All scripts used for analyses.
  (8) Additional files used for analyses.
  (9) Improved set of species habitat suitability maps (~2,600 species; based on species observations
  filtered at 1x1-km) and related taxonomic diversity at 100-m resolution (aggregated to km +
  non-aggregated/predicted) for CLIM, SOIL and CLIM-SOIL models ---> not incorporated in the study.

climate

display_name: climate

ecological-indicator-values

display_name: ecological-indicator-values

functional-diversity

display_name: functional-diversity

grain-size

display_name: grain-size

phylogenetic-diversity

display_name: phylogenetic-diversity

soil

display_name: soil

taxonomic-diversity

display_name: taxonomic-diversity

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Resolution in species distribution models shapes spatial patterns of plant multifaceted diversity


lidar-davos-wolfgang

maintainer: Patric Seifert

title_for_slug: lidar-davos-wolfgang

en: clouds lidar raclets polly tropos

en: Raman Lidar Davos

format: SERVICE

en: A portable Raman lidar system (Polly) from Leibnitz Institute for Tropospheric Research (Tropos) was deployed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Please use this [link](http://polly.tropos.de/?p=lidarzeit&Ort=39), to be directly forwarded to the Davos location and select the date of interest from the calendar (bold numbers). The data can be requested directly at the Polly team.

clouds

display_name: clouds

lidar

display_name: lidar

polly

display_name: polly

raclets

display_name: raclets

tropos

display_name: tropos

en: LIDAR Davos Wolfgang


maintainer: EnviDat Support

en: wagital gcos snow-water-equivalent snow meteodat-gmbh

media_type: TXT

format: TXT

en:
Total water reserves of the snow cover [mio m3] for Wägital catchment, Switzerland, for reference date April 1. Data is separated in 2 elevation zones 900m-1500m asl and 1500m-2300m asl. Time period 1943-2022, status 2022-04-20.

Funded currently or in the past by:

- Federal Office of Meteorology and Climatology MeteoSwiss in the context of GCOS Switzerland
- Meteodat GmbH
- Institute of Geography, University of Zurich
- WSL Institute for Snow and Avalanche Research SLF
- Institute of Geography, ETH Zurich (IAC ETH Zurich)
- AG Kraftwerk Wägital (AXPO and EWZ)

See also https://www.meteodat.ch/waegital.html

gcos

display_name: gcos

meteodat-gmbh

display_name: meteodat-gmbh

snow-water-equivalent

display_name: snow-water-equivalent

wagital

display_name: wagital

en: Snow water equivalent for reference date April 1 for Wägital catchment, starting 1943


en: open-source digital-elevation-model digital-planning geoinformation-software cable-yarding swiss-geodata seilaplan swisstopo qgis-plugin

en: Herunterladen des DHM von swisstopo Website

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. As an alternative to using the ‘Swiss Geo Downloader’ plugin, the DTM can be obtained directly from Swisstopo. In this tutorial we explain step by step how to download the necessary DTM from the Swisstopo Website, and how to use it in QGIS for the digital planning of a cable line using the plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to the elevation model on the swisstopo website: https://www.swisstopo.admin.ch/de/geodata/height/alti3d.html#technische_details

Link to the rope map website: https://seilaplan.wsl.ch

********************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Als Alternative zum Swiss Geo Downloader erklären wir in diesem Tutorial Schritt für Schritt, wie man das nötige Höhenmodell von der Swisstopo Webseite herunterladen und in QGIS zur Seillinienplanung verwenden kann.

Link zum Höhenmodell auf der swisstopo Webseite: https://www.swisstopo.admin.ch/de/geodata/height/alti3d.html#technische_details

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-software

display_name: geoinformation-software

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

swisstopo

display_name: swisstopo

en: Seilaplan Tutorial: DTM download from swisstopo website


lwf-tea-bag-sites

maintainer: Marcus Schaub

title_for_slug: lwf-tea-bag-sites

en: tea-bag roiboos carbon verification green-tea modeling litter decomposition forest

en: Site Information

media_type: text/csv

en: Descriptive information on sites

format: CSV

mimetype: text/csv

en:
Decomposition of plant litter is a key process for the transfer of carbon and nutrients in ecosystems. Carbon contained in the decaying biomass is released to the atmosphere as respired CO2, and may contribute to global warming. Litterbag studies have been used to improve our knowledge of the drivers of litter decomposition, but they lack comparability because litter quality is plant species-specific. The use of commercial tea bags as a standard substrate was suggested in order to harmonize studies, where green tea and rooibos represent more labile and more recalcitrant C compounds as surrogates of local litter.
The tea bag approach was implemented on eight sites of the Swiss long-term Forest Ecosystem Research (LWF) network (https://www.wsl.ch/LWF). This allowed us to take advantage from the existing infrastructure and data from a previous litterbag study with local litter. In Beatenberg and Schaenis, additional elevation transects were established (1200-1800 m and 540-1150 m, respectively) to examine particularly the effect of temperature on decomposition. In Pfynwald (https://www.wsl.ch/de/ueber-die-wsl/versuchsanlagen-und-labors/flaechen-im-wald/pfynwald.html) and Salgesch, infrastructure of running projects was used to examine the effect of drought and understory removal, respectively. In Novaggio, tea bags were incubated in summer and winter to study the effect of seasonality particularly precipitation. Tea bags are collected after 3, 12, 24, and 36 months; for the two time-shifted experiments additionally after 6 and 9 months.
The study has two primary objectives. Firstly, it contributes to TeaComposition initiative (http://teacomposition.org/) which aims at investigating long-term litter decomposition and its key drivers at present as well as under different future climate scenarios using a common protocol and standard litter (tea) across nine terrestrial biomes. Secondly, the data are used to further develop decomposition models such as Yasso (http://en.ilmatieteenlaitos.fi/yasso) which is used by several countries, including Switzerland to estimate the annual carbon fluxes in dead wood, litter, and soil for reporting in National Greenhouse Gas Inventories under the United Nations Framework Convention on Climate Change and the Kyoto Protocol.

carbon

display_name: carbon

decomposition

display_name: decomposition

forest

display_name: forest

green-tea

display_name: green-tea

litter

display_name: litter

modeling

display_name: modeling

roiboos

display_name: roiboos

tea-bag

display_name: tea-bag

verification

display_name: verification

en: LWF-Tea bag sites


en: forest shading shortwave-radiation longwave-radiation fractional-snow

en: Seasonal sub-canopy radiation data

en:
Seasonal, spatially aggregated incoming and outgoing shortwave radiation below an evergreen forest stand collected with a cable car system.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover Control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

format: XLS

en: Radiation Data 18.04.2019

en:
Spatiotemporal incoming/outgoing shortwave and longwave radiation as well as sunlit and shaded-snow view fractions below an evergreen forest stand in the Swiss alps. Data was collected on 18th of April 2018 along a 48m long, heterogeneous forest stand under full snow cover conditions.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: Radiation Data 25.4.2018

en:
Spatiotemporal incoming/outgoing shortwave and longwave radiation as well as sunlit and shaded-snow view fractions below an evergreen forest stand in the Swiss alps. Data was collected on 25th of April 2018 along a 48m long, heterogeneous forest stand under partial snow cover conditions.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: Sky-view fraction along the cablecar transect

media_type: text/plain

en: Data is used and described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research. DOI:10.1029/2018JD029908.

mimetype: text/plain

en: This data set consists of incoming and outgoing short- and longwave radiation as well as sunlit-snow-view-fraction as described in the JGR-Atmospheres paper "Shading by trees and fractional snow cover control the sub-canopy radiation budget", by Malle et al. (2019). Data was collected along a 48m long, heterogeneous forest transect between January and June 2018 close to Davos, Switzerland.

fractional-snow

display_name: fractional-snow

longwave-radiation

display_name: longwave-radiation

shading

display_name: shading

shortwave-radiation

display_name: shortwave-radiation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: land-use-transformations strategic-spatial-planning urban-transformations strategic-projects land-use-change spatial-planning large-scale-urban-development-projects europe

en: QCA R script large-scale urban development projects Europe

media_type: R

en:
For the set up of this R script, we used the “QCA” (Duşa, 2019) and “SetMethods” (Oana and Schneider, 2018) R packages.

The following further resources were also used:
Dusa, A. (2019). QCA with R: A comprehensive resource. Springer: Berlin.
Schneider, C. Q., & Wagemann, C. (2012). Set-theoretic methods for the social sciences. A guide to qualitative comparative analysis. Cambridge: Cambridge University Press.
Thomann, E., Oana, I.-E., & Wittwer, S. (2018). Performing fuzzy- and crisp set QCA with R. A user-oriented beginner's guide. Retrieved from http://www.evathomann.com/links/qca-r-manual

en: QCA data set large-scale urban development projects

en: Please refer to the sections: 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalization in the Metadata for further details on this resource.

en:
Table of Content: 1. General context of the data set "lsUDPs" ; 2. Background and aims of the study using the data set lsUDPs; 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalisation

1. General context of the data set "lsUDPs"
The data set "lsUDPs" has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2020. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, strategic spatial plans) into quantitative land-change modelling approaches at the urban regional level. The first stage (2016-2017) of the CONCUR project focussed on 21 urban regions in Western Europe. The urban regions were selected through a multi-stage strategy for empirical research (see Hersperger, A. M., Grădinaru, S., Oliveira, E., Pagliarin, S., & Palka, G. (2019). Understanding strategic spatial planning to effectively guide development of urban regions. Cities, 94, 96–105. https://doi.org/10.1016/j.cities.2019.05.032 ).

2. Background and aims of the study using the data set lsUDPs
As part of the CONCUR project, a specific task was to examine the relationship between strategic spatial plans and the formulation and implementation (i.e. urban land change) of large-scale urban development projects in Western Europe.
Strategic urban projects are typically large-scale, prominent urban transformations implemented locally with the aim to stimulate urban growth, for instance in the form of urban renewals of deprived neighborhoods, waterfront renewals and transport infrastructures. While strategic urban projects are referred to in the literature with multiple terms, in the CONCOR project we call them large-scale urban development projects (lsUDPs).
Previous studies acknowledged both local and supra-local (or structural) factors impacting the context-specific implementation of lsUDPs. Local governance factors, such as institutional capacity, coordination among public and private actors and political leadership, intertwine with supra-local conditions, such as state re-scaling processes and devolution of state competencies in spatial planning, de-industrialisation and increasing social inequality. Hence, in implementing lsUDPs, multi-scalar factors act in combination.
Because the formulation and implementation of lsUDPs require multi-scalar coordination among coalitions of public and private actors over an extended period of time, they are generally linked to strategic spatial plans (SSPs). Strategic spatial plans convey collective visions and horizons of action negotiated among public and private actors at the local and/or regional level to steer future urban development, and can contain legally binding dispositions, but also indicative guidelines.
The key question remains as to what extent large-scale urban development projects and strategic spatial plans can be regarded as aligned. By alignment, or “concordance”, we mean that strategic projects are formulated and implemented as part of the strategic planning process (“high concordance”), or that the strategic role of projects is reconfirmed in (subsequent) strategic plans (“moderate concordance”). Lack of concordance is found when lsUDPs have been limitedly (or not at all) acknowledged in strategic spatial plans.
We assume that certain local and supra-local factors, characterising the development of the projects, foster (but not strictly “cause”) the degree of alignment between lsUPDs and SSPs. In this study, we empirically examine how, and to what extent, the concordance between 38 European large-scale urban development projects and strategic plans (outcome: CONCOR) has been enabled by five multi-scalar factors (or conditions): (i) the role of the national state (STATE), (ii) the role of (inter)national private actors (PRIVATE), (iii) the occurrence of supra-regional external events (EVENTS), (iv) the degree of transport connectivity (TRANSP), and (v) local resistance from civil society (RESIST). We adopted a (multi-data) case-based qualitative strategy for empirical research and applied the formalised procedure of within- and cross-case comparison offered by fuzzy-set Qualitative Comparative Analysis appropriate for the goal of this study. Based on set theory, QCA formally integrates contextual sensitivity to case specificities (within-case knowledge) with systematic comparative analysis (across-case knowledge).
The research question the data set has been created to reply to is the following: which conditions, and combinations of conditions, enable the concordance between large-scale urban development projects and strategic spatial plans?
The conditions (“independent variables”) considered are. STATE: the set of large-scale urban projects characterized by a high degree of state intervention and support in their formulation and implementation, PRIVATE: the set of large-scale urban projects characterized by a high degree of involvement of (inter)national private actors in their formulation and implementation, EVENTS: the set of large-scale strategic projects whose formulation and implementation have been strongly affected by unforeseen international events and/or global trends, TRANSP: the set of large-scale strategic projects with a high degree of road and/or transit connectivity, and RESIST: set of large-scale strategic projects whose realization has been characterized by resistances that have substantially delayed or modified the project implementation.
The outcome (“dependent variable”) under analysis is CONCOR: the set of large-scale urban projects having a high degree of concordance/alignment/integration with strategic spatial plans

3. The data set lsUDPs

   3.1 Selection of cases and data collection
To generate the current data set on large-scale urban development projects in European urban regions (data set "lsUDPs"), we identified 35 large-scale urban development projects in a sample of the 21 Western urban regions considered in the CONCUR project (see supra, Hersperger et al. 2019): Amsterdam, Barcelona, Copenhagen, Hamburg, Lyon, Manchester, Milan, Stockholm, Stuttgart. The criteria we followed to identify the 35 large-scale urban development projects are: geographical location, size (large-scale), site (located either in the city core or in the larger urban region) and urban function (e.g. housing, transportation infrastructures, service and knowledge economic functions). Employing these criteria facilitated the selection of diverse large-scale urban development projects while still ensuring sufficient comparability.
In 2016, we performed 47 in-depth interviews with experts in urban and regional planning and large-scale strategic projects and infrastructure (i.e. academics and practitioners) about the formulation, implementation and development (1990s–2010s) of each project in each of the 9 selected urban regions. On average, each interviewee answered questions on 3.1 large-scale urban development projects. Three cases were subdivided into two cases because a clear differentiation between specific implementation stages was identified by the interviewees (expansion of the Barcelona airport, cases “bcn_airport80-90” and “bcn_airport00-16”; realisation of Lyon Part-Dieu, cases “lyo_partdieu70-90” and “lyo_partdieu00-16”; MediaCityUK, cases “man_salfordquays80-00” and “man_mediacityuk00-16”). Therefore, from the initial 35 cases, the final number of analysed cases in the lsUDPs dataset is 38.

    3.2 The data set lsUDPs: Data management and operationalisation
Interviews were fully transcribed and analysed through MAXQDA (version 12.3, VERBI GmbH, Berlin, Germany), and intercoder agreement was evaluated on a sample of nine interviews. We also compiled “synthetic case descriptions” (SCD) for each case (totalling more than 160 SCDs) to spot potential inconsistencies among interviewees’ accounts and to facilitate completion of the “calibration table” for each case (see below). An online expert survey distributed to the interviewees (response rate 78%) helped systematise the information collected during the interviews. We also consulted both academic and gray literature on the case studies to check for possible ambiguity and inconsistencies in the interview data, and to solve discrepancies between our assigned set membership scores and questionnaire values. Site visits were also carried out to retrieve additional information on the selected cases.
For each case (i.e. each of the 38 selected large-scale urban development projects), we operationalised each condition (i.e. STATE, PRIVATE, EVENTS, TRANSP, RESIST) and the outcome (CONCOR) in terms of sets, for subsequent application of Qualitative Comparative Analysis. This process is called “calibration”; we used a number of indicators for each condition to qualitatively assess each large-scale project across the conditions. The case-based qualitative assessment was then transformed into fuzzy-set membership values. Fuzzy-set membership values range from 0 to 1, and should be conceived as “fundamentally interpretative tools” that “operationalize theoretical concepts in a way that enhances the dialogue between ideas and evidence” (Ragin 2000:162, in “Fuzzy-set Social Science”. Chicago: University Press). We employed a four-value fuzzy-set scale (0, 0.33, 0.67, 1) to “quantify” into set membership scores the individual histories of cases retrieved from interview data. Only the condition TRANSP was calibrated as a crisp-set (0, 1).
The translation of qualitative case-based information into numerical fuzzy-set membership values was iteratively performed by populating a calibration table following standard practices recently emerged in QCA when dealing with qualitative (interview) data.

europe

display_name: europe

land-use-change

display_name: land-use-change

land-use-transformations

display_name: land-use-transformations

large-scale-urban-development-projects

display_name: large-scale-urban-development-projects

spatial-planning

display_name: spatial-planning

strategic-projects

display_name: strategic-projects

strategic-spatial-planning

display_name: strategic-spatial-planning

urban-transformations

display_name: urban-transformations

en: lsUDPS Large-scale urban development projects in European urban regions


en: outgoing longwave-radiation weissfluhjoch incoming shortwave-radiation

en: Metadata

media_type: application/pdf

format: PDF

mimetype: application/pdf

en: Parameter file

en: DATA ACCESS

en: Processing doc

en:
Corrected incoming and outgoing shortwave and longwave 2 min radiation measurements at the Weissfluhjoch summit, Davos, CH.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

incoming

display_name: incoming

outgoing

display_name: outgoing

weissfluhjoch

display_name: weissfluhjoch

en: ASRB_WFJ: Shortwave and longwave radiation measurements (2 min) at the Weissfluhjoch research site, Davos


maintainer: Lisa Hülsmann

en: forest-reserves tree-mortality primeval-forests forest-inventory mortality-models fagus-sylvatica

en: Swiss data full

en:
READ ME for

Hülsmann L, Bugmann H, Commarmot B, Meyer P, Zimmermann S, Brang P
Data from: Does one model fit all? Patterns of beech mortality in natural forests of three European regions.
Ecological Applications http://dx.doi.org/10.5061/dryad.h4s6t

Forest inventory data of beech for the development of individual-tree mortality models from strict forests reserves in Switzerland, Germany and Ukraine.

The data package provides the files
CH_reduced: inventory data of the reduced dataset from Switzerland that was used to assess the influence of additional environmental and stand characteristics on beech mortality
CH: inventory data from strict forest reserves in Switzerland
DE: inventory data from strict forest reserves in Germany
UA: inventory data from a primeval beech forest in Ukraine

A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.
Diameter at breast height: dbh (mm)
Annual relative basal area increment: relBAI (), calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area (Bigler and Bugmann 2004)
Status of the tree: y, 0 = alive, 1 = dead
Length of the mortality period: dt (years)

Additional environmental and stand characteristics were derived for the reduced Swiss dataset.
Note the varying seasonal level of the covariates considering the entire year, the growing season from April to September (G) and the winter month January to March (W).
All climatic covariates were calculated for both the ‘growth’ (2) and the ‘mortality’ period (3). The stand covariates were derived for the second inventory of each record (2).

Mean diameter at breast height: dbh.mean.2 (mm)
Interquartile range of diameter at breast height: dbh.IQR.2 (mm)
Median diameter at breast height: dbh.median.2 (mm)
Basal area per hectare: BA.2 (m2 ha-1)
Number of trees per hectare: N.2 (ha-1)
pH-value: pH ()
Available water capacity in the soil: AWC (mm)
Mean annual precipitation sum: P.2, P.3 (mm)
Mean precipitation sum during growing season: PG.2, PG.3 (mm)
Mean annual air temperature: mT.2, mT.3 (°C)
Mean air temperature during growing season: mTG.2, mTG.3 (°C)
Mean air temperature during winter months: mTW.2, mTW.3 (°C)
Mean growing degree-days: GDD.2, GDD.3 ()
Mean number of months during growing season with water deficit: mDEFdurG.2, mDEFdurG.3 ()
Mean annual maximum water deficit: mDEFmax.2, mDEFmax.3 (mm)
Overall maximum of the annual maximum water deficit: maxDEFmax.2, maxDEFmax.3 (mm)
Mean of cumulative water deficit during growing season: mDEFcumG.2, mDEFcumG.3 (mm)
Overall maximum of cumulative water deficitduring growing season: maxDEFcumG.2, maxDEFcumG.3 (mm)
Percentage of years with at least one month water deficit: percDEF.2, percDEF.3 (%)

en: Ukrainian data

en: German data

en: Swiss data reduced

en:
The datasets comprise nearly 19’000 trees of European beech (_Fagus sylvatica_ L.) from unmanaged forests in Switzerland, Germany / Lower Saxony and Ukraine. Tree death was modelled as a function of size and growth, i.e., stem diameter (DBH) and relative basal area increment (relBAI). To explain the spatial and temporal variability in mortality patterns, we considered a large set of environmental and stand characteristics.

 Inventory data
The strict forest reserves in Switzerland and Germany had been established in the period of 1961-1975 and 1971-1974, respectively. Every reserve included up to 10 permanent plots ranging from 0.09 to 1.8 ha in size, with slightly irregular re-measurement intervals. Permanent plots with pure or mixed beech stands were selected from the reserves of both networks. Reserves with considerable wind disturbance during the monitored intervals were excluded from the analysis. In addition to data from the Swiss and German reserves, data from a 10 ha plot in the primeval beech forest Uholka in Western Ukraine including three remeasurements were used. The inventory data provide diameter measurements at breast height (dbh) for revisited trees with a diameter of more than 4, 7 and 6 cm for Switzerland, Germany and Ukraine, respectively.

 Mortality predictors
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory. As an explanatory variable, the annual relative basal area increment (relBAI) was calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area. Tree dbh in the second inventory was used in addition to relBAI to model tree status (alive or dead) of the third inventory.

To increase the generality of the mortality models, we selected environmental variables that are known to have a considerable influence on growth and mortality of beech. We emphasized the effects of water availability using a large set of drought characteristics that were calculated based on the local site water balance. We also related beech mortality to soil pH, temperature, precipitation and growing degree-days. Additionally, we considered stand characteristics that reflect the development stage, competition and structure of the forests.

 Further information
For further information, refer to Hülsmann _et al_. (2016) Does one model fit all? patterns of beech mortality in natural forests of three European regions. _Ecological Applications_.

fagus-sylvatica

display_name: fagus-sylvatica

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves

mortality-models

display_name: mortality-models

primeval-forests

display_name: primeval-forests

tree-mortality

display_name: tree-mortality

education

en: Education and science

en: Data from: Does one model fit all? patterns of beech mortality in natural forests of three European regions


biogas-aus-hofdunger-in-der-schweiz

title_for_slug: biogas-aus-hofdunger-in-der-schweiz

en: bioenergy switzerland manure biogas review

en: Biogas aus Hofdünger in der Schweiz

media_type: PDF

en: Ziel dieses Whitepapers ist es, Entscheidungsträgern, Verwaltungen und Stakeholdern die aktuellsten Forschungsergebnisse zur Verfügung zu stellen, um die optimale Nutzung von Bioenergie aus Hofdünger in der Schweizer Energiewende zu fördern. Zu diesem Zweck werden die Ergebnisse des Schweizer Kompetenzzentrums für Bioenergieforschung - SCCER BIOSWEET - zusammengefasst und in einem breiteren Kontext dargestellt. Wenn nichts anderes erwähnt wird, beziehen sich die Ergebnisse auf die Schweiz und im Falle der Ressourcen auf die heimischen Biomassepotenziale.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: development-priorities strategic-plans europe spatial-information urban-region

en: Planning intentios

en:
The present dataset is part of the report titled Gradinaru S.R., Hersperger A.M., Schmid F. (2021). Deriving Planning Intentions from written planning documents. Report on CONCUR Project- From plans to land change: how strategic spatial planning contributes to the development of urban regions.
The data corresponds to the data collected as part of the DPI Method for deriving all PIs contained in a plan (open coding) as detailed in section 4 of the report. The method involved reading the plans to break down of information in meaningful discrete “incidents” or planning intentions. To identify the planning intentions, the starting points were represented by a) the structuring of the plans in chapters and sub chapters and b) the themes that the plans addressed. Thus, the collected information was not grouped according to pre-defined categories of planning intentions, but rather put together as a list of intentions as revealed by each plan. As a result, we provide, for each case study, a document (named [Urban region name] PI as defined in the plan) which contains:
	Date when the information was filled in.
	Name of the urban region and analysed strategic spatial plan .
	A list of all planning intentions contained in a plan, with each PI being addresses as follows:
	Name of PI as it appears in the plan
	Translated name of the PI (i.e. short name for easy understanding of the meaning)
	Explanation regarding the meaning of the PI
	Why the PI is considered a priority for the urban region
	Spatial information on the PI (text and cartographic representations).
In total, 14 documents are available, one for each case study. Documents contain up to 20 pages of information extracted from the plans together with explanations and notes taken during plan reading.

development-priorities

display_name: development-priorities

europe

display_name: europe

spatial-information

display_name: spatial-information

strategic-plans

display_name: strategic-plans

urban-region

display_name: urban-region

en: Planning intentions in strategic plans of European urban regions


en: urban-planning urban-landscape concur landscape-planning land-change

media_type: .pdf

en:
Book of abstracts from the virtual conference "From Plans to Land Change: Dynamics of Urban Regions"

Cities and urban regions are among the most dynamic land-use systems in the world, with dramatic consequences for the provision of ecosystem services and the livelihood of people. Planning is a multifaceted activity with extensive experience in the management of these urbanization processes. However, our understanding of planning’s contribution to shaping urban land use, form and structure is still incomplete, with serious consequences for the efficacy of urban planning and land change models.

This international conference aims to bring together the community of scholars working on planning evaluation and urban modelling. The participants are offered the opportunity to present their current research and to discuss how theoretical developments, data sources, comparative studies and modelling approaches might advance the field.

The conference was financially supported by the CONCUR project and sustained by Swiss Federal Research Institute WSL.

concur

display_name: concur

land-change

display_name: land-change

landscape-planning

display_name: landscape-planning

urban-landscape

display_name: urban-landscape

urban-planning

display_name: urban-planning

en: From Plans to Land Change: Dynamics of Urban Regions. Book of Abstracts


en: snow-ice-temperature snow-water-equivalent weisfluhjoch snow-density snow-stratigraphy

en: README

en: README file giving use metadata.

en: WFJ Snow Profiles 1999-2014

media_type: application/zip

en:
Biweekly manual snow profiles from Weissfluhjoch, Davos, Switzerland.
Version: 2015-09-14T16:25

mimetype: application/zip

en: Dataset of manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland. Typical snow profile measurements and observations are included (temperature, density, grain size, grain type, hardness, wetness), following the guidelines of the The International Classification for Seasonal Snow on the Ground (ICSSG) [Fierz, C., Armstrong, R.L., Durand, Y., Etchevers, P., Greene, E., McClung, D.M., Nishimura, K., Satyawali, P.K. and Sokratov, S.A. 2009. The International Classification for Seasonal Snow on the Ground. IHP-VII Technical Documents in Hydrology N°83, IACS Contribution N°1, UNESCO-IHP, Paris].

snow-density

display_name: snow-density

snow-ice-temperature

display_name: snow-ice-temperature

snow-stratigraphy

display_name: snow-stratigraphy

snow-water-equivalent

display_name: snow-water-equivalent

weisfluhjoch

display_name: weisfluhjoch

en: Manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland


maintainer: Christian G. Sommer

en: wind-packing wind-tunnel kinect snow wind-crust

en: Kinect data

media_type: Link

en: Links to the dataset

en: Describes the dataset in detail

en: Processing scripts

en: Contains the Matlab- and R-scripts used to process the Kinect data

en:
This data sets contains the Microsoft Kinect data from 15 wind tunnel experiments on wind-packing / wind crust formation. These experiments were performed in the winter 2016/17. The Kinect measures distributed snow depth.

The Kinect data is organized per experiment. Each experiment subfolder contains the processed Kinect depth images and some additional files.

Please refer to the README for more details on the data. The processing scripts are available for download as well. The scripts are mainly provided as documentation and would need to be adjusted to be used.

This dataset is the basis of the following publication:

Sommer C.G., Lehning M. & Fierz C. (2018). Wind Tunnel Experiments: Influence of Erosion and Deposition on Wind-Packing of New Snow. Front. Earth Sci. 6:4. doi: 10.3389/feart.2018.00004

kinect

display_name: kinect

snow

display_name: snow

wind-crust

display_name: wind-crust

wind-packing

display_name: wind-packing

wind-tunnel

display_name: wind-tunnel

education

en: Education and science

en: Wind crust formation: Microsoft Kinect data


maintainer: Océane Hames

en: arctic-sea-ice mosaic snow-transport snow-deposition openfoam

en: snowBedFoam 1.0.

media_type: .zip

en:
OpenFOAM-2.3.0. scripts containing the implemented Eulerian-Lagrangian snow transport model.

The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en: Paper Draft

en: This is the initial draft of the paper where the snowBedFoam 1.0. results are tested against Terrestrial Laser Scan (TLS) measurements of snow dynamics on Arctic sea ice (MOSAiC expedition). It highlights the numerical limitations of our model as well as the measurement uncertainties, which may occur in such extreme environments.

en: MOSAiC Met City preliminary (Level 2) wind data

media_type: zip-compressed folder of csv

en:
Extract from the preliminary MOSAiC atmospheric data (Level 2) for the time period 6th to 13th of November, 2019.
This data was used to set up the fluid forcing parameters in the snowBedFoam simulations on MOSAiC sea ice. It is being published in this repository with the kind permission from Matthew Shupe and his team.
The final processed and quality controlled version of this dataset (Level 3) has not been published yet. A complete reference will be added in this description once it is released.

en:
snowBedFoam 1.0. is a snow transport solver implemented in the Computational Fluid Dynamics (CFD) software OpenFOAM. It is adapted from the standard multi-phase flow solver DPMFoam for application in snow-influenced environments.

To simulate aeolian snow transport, snowBedFoam 1.0. handles coupled Eulerian–Lagrangian phases, which involve a finite number of particles (snow) spread in a continuous phase (air). The snow erosion and deposition are modelled through physically-based equations such as the ones employed in the well-established LES-Lagrangian Stochastic Model (Comola and Lehning, 2017 ; Sharma et al., 2018). This modelling approach is computationally intensive and thus adapted to simulate snow movement and distribution on small scale terrain.

snowBedFoam 1.0. was tested against topographical data collected on Arctic sea ice during the MOSAiC expedition (Clemens-Sewall, 2021) . Together with atmospheric data from the MOSAiC Met City (Shupe et al., 2021) used for the fluid forcing, the model was able to accurately simulate the zones of erosion and deposition of snow along a complex ice ridge structure.

The core code of snowBedFoam 1.0. is also accessible on the WSL/SLF GitLab repository (more details in the Resources section).

arctic-sea-ice

display_name: arctic-sea-ice

mosaic

display_name: mosaic

openfoam

display_name: openfoam

snow-deposition

display_name: snow-deposition

snow-transport

display_name: snow-transport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: snowBedFoam: an OpenFOAM Eulerian-Lagrangian solver for modelling snow transport


en: seilaplan wms-data open-source swiss-geodata geoinformation-system qgis-plugin digital-planning digital-elevation-model cable-yarding

en: View video on youtube!

en: WMS-Layer als Hintergrundkarten laden

en:
In order to digitally plan a cable line using the QGIS plugin ‘Seilaplan’, maps with various background information are helpful. In this tutorial we show you how to obtain maps that are helpful for cable line planning, for example a national map of Switzerland at different scales, the NFI vegetation height model or the NFI forest mix rate. For this we explain what WMS datasets are and how to integrate them into QGIS. No download of large data is needed for this, only a good internet connection. Please note that the tutorial language is German!

Link for the integration of WMS data: https://wms.geo.admin.ch/

Link to the description on the Swisstopo website:
https://www.geo.admin.ch/en/geo-services/geo-services/portrayal-services-web-mapping/web-map-services-wms.html

Link to the Seilaplan website: https://seilaplan.wsl.ch

**************************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung sind verschiedene Hintergrundkarten hilfreich. In diesem Tutorialvideo zeigen wir, was WMS Daten sind und wie man diese in QGIS einbinden kann. Dafür müssen die Daten nicht heruntergeladen werden. Es braucht lediglich eine gute Internetverbindung. Für die Seillinienplanung hilfreiche Karten sind bspw. die Landeskarte der Schweiz in verschiedenen Massstäben, das Vegetationshöhenmodell LFI oder der Waldmischungsgrad LFI.

Link zur Einbindung der WMS Daten: https://wms.geo.admin.ch/

Link zur Beschreibung auf der Swisstopo Webseite: https://www.geo.admin.ch/de/geo-dienstleistungen/geodienste/darstellungsdienste-webmapping-webgis-anwendungen/web-map-services-wms.html

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

wms-data

display_name: wms-data

en: Seilaplan Tutorial: Load WMS layers as background maps


maintainer: Andrin Caviezel

en: induced-rockfall stonenodedata natural-hazards sensor-stream stonenode rockfall-runout dem rockfall rockfall-experiments deposition-points

en: StoneNode v1.0 Data for equipped experimental Runs.

en: Corresponding StoneNode v1.0 data streams belonging to the deposition points.

en: Induced Rockfall Data, Tschamut, GR

en:
 Induced Rockfall Experimental Data, Tschamut, GR, Switzerland

The archive contains site specific geographical data as well as the deposition points of manually induced rockfall by releasing differently shaped boulders with 30–80 kg of mass. Additionally availabe are the StoneNode v1.0 sensor streams for the equipped rocks.

The _OverviewFigures_ file serves as quick representation of the included data. It also contains the overview table for the rock masses in order to set the dimensions accordingly in RAMMS::ROCKFALL.

The archive contains the following folders:
<\ul>
* DEM: ArcGIS compatible DEM Tschamut_DEM_2m (grid resolution of 2 m) as well as the .asc grid used in RAMMS::ROCKFALL simulations
* _DepositionPoints_: containing two folders _RF Tschamut Frozen_ and _RF Tschamut WET_ containing each a shapefile with the complete deposition data of each series as well as deposition shapfiles for each rock shape.
* _DigitizedRocks_: Digitized point clouds of the used rocks as used for RAMMS::ROCKFALL simulations (.pts files) (dimensions have to be checked).
* _Orthofoto_: Orthophoto of the experimental site obtained via UAV with 5 cm resolution.

en:
 Dataset of an experimental campaign of induced rockfall in Tschamut, Grisons, Switzerland.

The data archive contains site specific geographical data such as DEM and orthophoto as well as the deposition points of manually induced rockfall by releasing differently shaped boulders with 30–80 kg of mass. Additionally available are all the StoneNode data streams for rocks equipped with a sensor. The data set consists of

* Deposition points from two series (wet (27/10/2016) and frozen (08/12/2016) ground)
* Digital Elevation Model (grid resolution 2 m) obtained via UAV
* Orthophoto (5 cm resolution) obtained via UAV
* Digitized rock point clouds (.pts input files for RAMMS::ROCKFALL)
* StoneNode v1.0 raw data stream for equipped rocks.

Further information is found in

* A. Caviezel et al., _Design and Evaluation of a Low-Power Sensor Device for Induced Rockfall Experiments_, IEEE Transactions on Instrumentation and Measurement, 2018, 67, 767-779, http://ieeexplore.ieee.org/document/8122020/
* P. Niklaus et al., _StoneNode: A low-power sensor device for induced rockfall experiments_, 2017 IEEE Sensors Applications Symposium (SAS), 2017, 1-6, http://ieeexplore.ieee.org/document/7894081/

dem

display_name: dem

deposition-points

display_name: deposition-points

induced-rockfall

display_name: induced-rockfall

natural-hazards

display_name: natural-hazards

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

rockfall-runout

display_name: rockfall-runout

sensor-stream

display_name: sensor-stream

stonenode

display_name: stonenode

stonenodedata

display_name: stonenodedata

education

en: Education and science

en: Induced Rockfall Dataset (Small Rock Experimental Campaign), Tschamut, Grisons, Switzerland


en: swe snow-depth remote-sensing snow uas

en: .tfw file

media_type: tfw

en: coordinates for the .tif raster

en: HS map Brämabül, 14. April 2015

media_type: image/tiff

en:
10 cm resolution
15 cm accuracy

format: TIFF

mimetype: image/tiff

en:
This snow depth map was generated 14 January 2015, close to peak of winter accumulation, applying Unmanned Aerial System digital surface models with a spatial resolution of 10 cm. The covered area is 285'000 m2 at the top of Brämabüel, 2490 m a.s.l. covering all expositions. Coordinate system: CH1903LV03.

A detailed description is given here:

Bühler, Y., Adams, M. S., Bösch, R., and Stoffel, A.: Mapping snow depth in alpine terrain with unmanned aerial systems (UASs): potential and limitations, The Cryosphere, 10, 1075-1088, 10.5194/tc-10-1075-2016, 2016.

Abstract:
Detailed information on the spatial and temporal distribution, and variability of snow depth (HS) is a crucial input for numerous applications in hydrology, climatology, ecology and avalanche research. Nowadays, snow depth distribution is usually estimated by combining point measurements from weather stations or observers in the field with spatial interpolation algorithms. However, even a dense measurement network is not able to capture the large spatial variability of snow depth in alpine terrain.
Remote sensing methods, such as laser scanning or digital photogrammetry, have recently been successfully applied to map snow depth variability at local and regional scales. However, such data acquisition is costly, if manned airplanes are involved. The effectiveness of ground-based measurements on the other hand, is often hindered by occlusions, due to the complex terrain or acute viewing angles. In this paper, we investigate the application of unmanned aerial systems (UAS), in combination with structure-from-motion photogrammetry, to map snow depth distribution. Such systems have the advantage that they are comparatively cost-effective and can be applied very flexibly to cover also otherwise inaccessible terrain. In this study we map snow depth at two different locations: a) a sheltered location at the bottom of the Flüela valley (1900 m a.s.l.) and b) an exposed location (2500 m a.s.l.) on a peak in the ski resort Jakobshorn, both in the vicinity of Davos, Switzerland. At the first test site, we monitor the ablation on three different dates. We validate the photogrammetric snow depth maps using simultaneously acquired manual snow depth measurements. The resulting snow depth values have a root mean square error (RMSE) better than 0.07 to 0.15 m on meadows and rocks and a RMSE better than 0.30 m on sections covered by bushes or tall grass. This new measurement technology opens the door for efficient, flexible, repeatable and cost effective snow depth monitoring for various applications, investigating the worlds cryosphere.

remote-sensing

display_name: remote-sensing

snow

display_name: snow

snow-depth

display_name: snow-depth

swe

display_name: swe

uas

display_name: uas

en: UAS based snow depth maps Brämabüel, Davos, CH


maintainer: Roksolana Petrovska

en: shade-tolerance mortality-rate dominance fagus lar regeneration acer

en: Mortality of regeneration

media_type: CSV

en: Acer platanoides, Acer pseudoplatanus and Fagus sylvatica living and dead juveniles (0-500 cm in height) grown in the deep shade of a prime beech-dominated forest.

media_type: r script (flat-ascii text)

en: The R-script of survival analysis for accelerated failure time model

en:
 One individual per species, vitality class (low and high) and height class (eight classes: 0–10, 11–20, 21–35, 36–60, 61–90, 91–130, 131–200 and 201–500 cm) was randomly selected and harvested in each of the six plots. This resulted in a sample of 82, 80 and 89 living individuals of A. platanoides, A. pseudoplatanus and F. sylvatica, respectively.

 Additionally stems of dead Acer spp. and F. sylvatica trees that had died within the last three years (2015–2018) were randomly harvested, matching the height classes of the harvested living trees wherever possible. In total, 179 dead young trees (60 A. platanoides, 72 A. pseudoplatanus and 47 F. sylvatica) were collected.

 Variables:
* species_code: a_pla - Acer platanoides, a_pse - Acer pseudoplatanus, f_syl - Fagus sylvatica
* species: as above
* dummy: 0 - living individual, 1 - dead individual
* LAR_cm2_g: leaf area ratio or ratio of leaf area to total plant biomass, [cm2/g]
* tree_age: in years
* avg_ring_micron: average width of the last 5 rings in tree life excluding the last ring
* dry_mass_g: aboveground and belowground biomass
* DLI: direct light index (measured only under living individuals)
* BLI: diffuse light index (measured only under living individuals)
* GLI: global light index

acer

display_name: acer

dominance

display_name: dominance

fagus

display_name: fagus

lar

display_name: lar

mortality-rate

display_name: mortality-rate

regeneration

display_name: regeneration

shade-tolerance

display_name: shade-tolerance

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Mortality of regeneration: Acer spp. and Fagus sylvatica


en: fagales species-range-map species-richness pinales species-distribution-model species-occurrence

en: Occurrence maps for species of Fagales and Pinales with few records

en: Point_buffer.zip includes 267 occurrence maps of species that do not have enough occurrence data for polygon mapping.

en: Species range maps of species in Fagales and Pinales (with enough occurrences)

en: species_map.zip includes species 1690 range maps generated based on the integrated method described in Lyu et al., (2022). File names with (polygon) indicate that this map is only generated by polygon mapping, as there are not enough occurrences for SDMs.

en:
This database contains 1957 distribution maps of species from Fagales and Pinales constructed based on a method integrating polygon mapping and SDMs (Lyu et al., 2022).
To construct the maps, we first collected occurrence data from 48 different sources. According to the number of occurrences after data cleaning, three kinds of maps are constructed: (1) For species with more than 20 occurrences, we performed SDM and polygon mapping described in Lyu et al. (2022) and select the integration of the two layers as the distribution range; (2) For species with more than 4 but less than 20 occurrences, we only use polygon mapping to draw the distribution range; (3) For species with less than 4 occurrences, a 20-km buffer was generated around the occurrences as the distribution range. The maps were manually checked and evaluated (see Note S3 and Table S9 in Lyu et al., 2022 for details).

fagales

display_name: fagales

pinales

display_name: pinales

species-distribution-model

display_name: species-distribution-model

species-occurrence

display_name: species-occurrence

species-range-map

display_name: species-range-map

species-richness

display_name: species-richness

education

en: Education and science

en: Species distribution maps of Fagales and Pinales (GDPlants)


modeling-snow-failure-with-dem

title_for_slug: modeling-snow-failure-with-dem

en: snow-avalanche snow discrete-element-modelling snow-micro-mechanics snow-failure

en: Dataset

en: The zip file contains the data underlying the figures presented in Bobillier et al. (2019). The figures can be reproduced with the python file, which is also provided.

en: Python file

media_type: text/x-python

en: Python file to reproduce the figures in Bobillier et al. (2019)

mimetype: text/x-python

en: Read-me

en: The read-me file contains a description of all the data provided in the zip file.

en: This data set includes the modeling results described in the research article by Bobiller et al. (2020). All the figures in the article can be reproduced with the data provided.

discrete-element-modelling

display_name: discrete-element-modelling

snow

display_name: snow

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-micro-mechanics

display_name: snow-micro-mechanics

en: Modeling snow failure with DEM


weather-station-davos-wolfgang

maintainer: Jörg Wieder

title_for_slug: weather-station-davos-wolfgang

en: weather pressure raclets temperature relative-humidity

en: Weather Station Davos Wolfgang

en: The data file contains date and time (YYYY-MM-DD hh:mm:ss) in UTC, temperature (°C), relative humidity (%), pressure (hPa) at 10 m above ground and above sea level. The data was averaged over 10 minutes.

en: The dataset contains weather parameters measured at Davos Wolfgang (LON: 9.853594, LAT: 46.835577).

pressure

display_name: pressure

raclets

display_name: raclets

relative-humidity

display_name: relative-humidity

temperature

display_name: temperature

weather

display_name: weather

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: manure review switzerland bioenergy biogas

en: Production de biogaz à partir d’engrais de ferme en Suisse

en: L'objectif de ce livre blanc est de fournir aux décideurs, aux administrations et aux parties prenantes les résultats de recherche les plus récents afin de promouvoir l'utilisation optimale de la bioénergie issue des engrais de ferme dans la transition énergétique suisse. A cette fin, les résultats du centre de compétence suisse pour la recherche en bioénergie - SCCER BIOSWEET - sont résumés et présentés dans un contexte plus large. Si rien d'autre n'est mentionné, les résultats se réfèrent à la Suisse et, dans le cas de la matière première, aux potentiels nationaux de biomasse.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland

education

en: Education and science


data-analysis-toolkits

title_for_slug: data-analysis-toolkits

en: hypothesis-testing data-analysis statistics uncertainty error-propagation bayesian-inference

en: Toolkit 7: hypothesis testing, significance, and power

en: An overview of basic concepts -- and common pitfalls -- in statistical hypothesis testing, statistical significance, and power analysis

en: Toolkit 12: weighted averages and their uncertainties

en: There are two different ways to calculate the uncertainty of a weighted average. Software packages often don't tell you which one they are reporting, and the resulting errors can be huge.

en: Toolkit 1: graphically displaying data distributions

en: Toolkit 10: linear regression

en: An overview of the math, logic, and pitfalls of ordinary least-squares linear regression

en: Toolkit 8: Hodges-Lehmann estimators

en: A quick introduction to Hodges-Lehmann estimators (nonparametric measures of effect size)

en: Toolkit 11: serial correlation

en: Tools for detecting and correcting for serial correlation in analyses of time series

en: Toolkit 5: uncertainty analysis and error propagation

en: Gaussian error propagation, monte carlo methods, and first-order, second-moment error propagation

en: Toolkit 9: Experimentwise error rates and statistical fishing expeditions

en: Statistical fishing expeditions, and how to avoid being misled by them

en: Toolkit 3: tools for transforming data

en: The ladder of powers and a few other cool transformations

en: toolkit 6: averaging in nonlinear functions

en: The average of a nonlinear function will not equal the function evaluated at its average inputs (the mean of the function will differ from from the function of the mean). This toolkit shows how to estimate that averaging bias.

en: Toolkit 2: quantifying data distributions using descriptive statistics

en: Toolkit 4: confidence intervals

en:
These are condensed notes covering selected key points in data analysis and statistics. They were developed by James Kirchner for the course "Analysis of Environmental Data" at Berkeley in the 1990's and 2000's. They are not intended to be comprehensive, and thus are not a substitute for a good textbook or a good education!

License: These notes are released by James Kirchner under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.

bayesian-inference

display_name: bayesian-inference

data-analysis

display_name: data-analysis

error-propagation

display_name: error-propagation

hypothesis-testing

display_name: hypothesis-testing

statistics

display_name: statistics

uncertainty

display_name: uncertainty


vegetation-height-model-nfi

maintainer: Christian Ginzler

title_for_slug: vegetation-height-model-nfi

en: point-cloud forest photogrammety 3d vegetation-height-model

en: 2012 Vegetation Height Model NFI

media_type: geotiff

en:
Data 'Vegetation Height Model NFI 2012' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2007 to 2012.

format: GeoTIFF

en: 2016 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2016' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2011 to 2016.

en: 2019 Vegetation Height Model NFI (current)

en:
Data 'Vegetation Height Model NFI 2019' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2013 to 2019.

en: 2015 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2015' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2010 to 2015.

en: Thumbnail

media_type: image/jpeg

mimetype: image/jpeg

en: Countrywide Stereo-Image Matching for Updating Digital Surface Models in the Framework of the Swiss National Forest Inventory

en:
A national vegetation height model was calculated for Switzerland using digital aerial images.
We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution
(1 × 1 m and 0.5 x 0.5 m). The DSM was then normalized to obtain the actual
vegetation heights using a digital terrain model (DTM)
based on laser data with the buildings masked out, and to
produce a vegetation height model (VHM). Such a model
will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very
high level of detail. For covering the whole of Switzerland,
we use summer aerial images from six years.

Latest version is from 2019.

forest

display_name: forest

photogrammety

display_name: photogrammety

point-cloud

display_name: point-cloud

vegetation-height-model

display_name: vegetation-height-model

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Vegetation Height Model NFI


en: system-identification transfer-function de-mixing time-series-analysis deconvolution arma-noise irfnnhsr impulse-response-function greens-function irf nonlinear-deconvolution

en: README file for IRFnnhs.R and benchmark demonstration scripts

media_type: flat-ascii text

en: Benchmark demonstration scripts and results

media_type: zip-compressed folder of R scripts and tab-delimited text files

en: Impulse Response Function script

en:
The R script IRFnnhs.R, which efficiently estimates impulse response functions for environmental systems that are nonlinear, nonstationary, or heterogeneous, based on their input and output time series.

Scripts and results for a series of benchmark tests are also provided, to accompany Kirchner, J.W., Impulse response functions for heterogeneous, nonstationary, and nonlinear systems, estimated by deconvolution and demixing of noisy time series, _Sensors_, 22(9), 3291, https://doi.org/10.3390/s22093291, 2022.

arma-noise

display_name: arma-noise

de-mixing

display_name: de-mixing

deconvolution

display_name: deconvolution

greens-function

display_name: greens-function

impulse-response-function

display_name: impulse-response-function

irf

display_name: irf

irfnnhsr

display_name: irfnnhsr

nonlinear-deconvolution

display_name: nonlinear-deconvolution

system-identification

display_name: system-identification

time-series-analysis

display_name: time-series-analysis

transfer-function

display_name: transfer-function

en: Impulse response functions for nonlinear nonstationary and heterogeneous systems


en: long-term relative-humidity par temperature swiss-forest-lab precipitation climate-change meteo meteorology wind-speed

en: Data plot of the forest station (LEB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site photo of the forest station (LEB)

en: Site photo of the forest station from below (viewing upwards the slope)

en: Forest station data (LEB)

media_type: text/csv

en: Data file.

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for one meteorological station in Lens in Switzerland which is located within a natural coniferous forest with Scots pine (_Pinus sylvestris_; 150-170 yrs)) as dominant tree species. The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Lens is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Lens, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: hydropower ecosystem-protection gis decision-making integral-water-management

en: Indicators

media_type: text/markdown

en: The indicators capture supporting ecosystem functions.

media_type: SHP

format: SHP

en:
 A spatial dataset and tool to simultaneously assess hydropower potential and ecological potential of the Swiss river network (Version 2016)

 Introduction
The steadily growing demand for energy and the simultaneous pursuit of decarbonisation are increasing interest in the expansion of renewable energies worldwide. In Switzerland, various funding projects have been launched to promote technologies in the field of renewable energies and their application as quickly as possible. With the introduction of a funding instrument in 2009, the number of projects submitted to produce renewable energies increased rapidly. The applications for small hydropower plants (≤ 10 MW) were correspondingly numerous. However, the assessment of the environmental impact and its comparison with hydropower importance is still not standardized.
To provide a basis for decision-making, a methodology was developed to determine the overall hydropower potential of a region. A detailed assessment of each river reach, and the systematic and holistic assessment of small hydropower projects at a regional scale are combined here. The assessment of a river reach is conducted at the river space (i.e., the river and adjacent areas) and at the surrounding landscape level. The HYDROpot_integral methodology was developed as part of Carol Hemund's dissertation (2012) at the University of Bern. It allows the evaluation of river reaches holistically, regarding ecological, social, economic and cultural criteria. As a second part of the overall project, the theoretical hydropower (or hydraulic) potential was calculated for the entire river network, which complemnets the spatial assessment. In particular, it is possible to classify river reaches into those that are more suitable for hydropower production (=”use”) and those that are more suitable for protection.

 Material and method
The HYDROpot_Integral method was developed and tested on the basis of cantonal and national data (Hirschi et al. 2013). The method relies on 73 geodata sets. This holistic assessment is the key element of the entire assessment procedure. Its aim is to quantify the importance of the ecosystem functions in terms of services. The river network (GWN07) is divided into reaches of about 450m and for each reach two study units are defined. The river space (RS) records the ecosystem functions of the water body and the nearby riparian area. The length of the RS is 315 m on average in Switzerland and a maximum of 450 m, whereas the width is based on the FOEN definition (BWG 2001: 18f) and varies between 7-107 m. The surrounding landscape (SLS) is the second survey unit that records the ecosystem functions of the surrounding area over a range of 21 m to 321 m. The SLS is calculated over three times the RS width. The length of the SLS is identical to the length of the RS. The ecosystem functions are divided into three types: regulating (service A), cultural (service B) and provisioning (service C) functions. Accordingly, the assessment of the functions is divided into three parts and three values are assigned to each river reach. The more functions there are and the greater their performance, the higher these values are and the more important the corresponding functions are. Hence, these values quantify the importance of the ecosystem functions and the ecological, cultural and economic ecosystem services of each river reach. The concatenation of ecosystem services results in a value (ABC) that can occur in 125 different versions due to the chosen five-level value scale; i.e. each digit of the three-digit number sequence can be assigned a value between 1 and 5. Each of the 125 combinations, and thus each river reach, has its own characteristics determined by the assessments of the three function types. To record the suitability, the combinations are ranked according to their ecological, cultural and economic ecosystem services. These rules mean that the combination that is most suitable for hydropower production at minimum cost in terms of ecological and cultural ecosystem services and has a high economic potential is ranked first; rank 125 indicates the highest ecological and cultural ecosystem services and the lowest economic services and is therefore most suitable for protection. A river reach that is excluded from hydropower use due to legislation, a so-called priority reach, is given rank 126 from the outset and specially marked. A more detailed description of the methods can be found in Hirschi et al. 2013 [Link]. The dataset presented here presents the latest state of the HYDROpot_integral methodology applied at the national level. Only national data that is easily accessible was used in the preparation of the dataset. The cantonal data, such as renaturation and revitalization, would have to be requested by each canton individually and was excluded here. The nationwide value synthesis was made with R.
A list of data sources can be found here [link to text file]
A list of all parameters can be downloaded here [link to PDF and text files]

 Dataset description
Data is presented as a single shapefile. It contains the river network and all assessment results obtained with HYDROpot_Integral.

 Changes in the methodology compared to the original method (Hirschi et. al 2013)

 * RS_A11 Ecomorphology: recorded for the whole of Switzerland and zero values equated with NA;
individual cantons such as Zug and St. Gallen have no mapped values according to the modular
concept of the federal government, Valais and Graubünden only the main valleys, Ticino and Fribourg not
completely (BAFU 2009).
 * RS_A14 Renaturation and revitalization data: not centrally available at the time of data collection.
centrally available, therefore values in GR were equated with NA.
 * RS_A15 Dilution ratio at wastewater treatment plants (WWTPs) for discharges: Zero values
equal to NA.
 * RS_A20 Water flow: use WASTA (2013) with hydroelectric power plants (> 300 kW) under
Federal control and dams serving hydroelectricity (Dam, as of 2013).
 * RS_C05 Synoptic hazard maps: are cantonally managed at the time of data collection,
Values in GR are marked with a 5 so that the systematics in the decision tree is not affected.
is affected.
 * Water quality (RS_A15, RS_A16, RS_A17, RS_A18, RS_A19): for the evaluation of the function type.
A Nature, it is important whether the median of the five values is less than or equal to 3 in total. This
evaluation is based on the decision tree for evaluating GR (Hirschi et al. 2013:22).
Therefore, an evaluation of the station data is made where critical and possible river segments
with poor quality (median less than 3) exist. Only two longer and one short
sections in Switzerland receive a lower median than 3 for water quality.
 * SLS_B06 Visibility: For 99 percent of the river segments (30,733 of 31,062) in the canton of
Bern (2015 reduced version), the landscape area is considered to be visible. Due to this high number
of sections, a large number of viewpoints in the layer of Swisstopo and
the computation time and computability in ArcGIS, the landscape area is classified as generally viewable
(equal to 1).
16 Method
Additional indicators were added (see Appendix B.2):
 * SLS_A21 Dissection
 * SLS_A22 Forest areas
 * SLS_B03 Hiking trails
 * SLS_B10 Residential and vacation homes
 * SLS_B11 Tourist infrastructure
 * SLS_C01 Landfill
 * SLS_C03 Infrastructure
 * SLS_C05 Industry
 * SLS_C06 Agricultural land
Not to be added, although present to some extent:
 * SLS_B06 Cultural assets of national importance: here, too, the calculability of the visibility analysis is
for the whole of Switzerland is limited
 * SLS_A15 Legally binding protection and land use planning: the individual river sections are not
clearly designated, i.e. no geodata exist
The following data are also not supplemented, as they are cantonal data:
 * SLS_A10 Cantonal nature reserves
 * SLS_A16 Forest reserves
 * SLS_A17 Cantonal inventories and contractually protected areas

decision-making

display_name: decision-making

ecosystem-protection

display_name: ecosystem-protection

gis

display_name: gis

hydropower

display_name: hydropower

integral-water-management

display_name: integral-water-management

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Sofia Pagliarin

en: imperviousness urban-atlas milan barcelona copernicus soil-sealing

media_type: .csv

media_type: mpk

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

en: Information on data sources

en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas

en: Soil sealing Barcelona and Milan different territorial levels


weather-station-klosters

maintainer: Maxime Hervo

title_for_slug: weather-station-klosters

en: precipitation temperature weather wind klosters raclets

en: Weather Station Klosters

media_type: application/zip

en: All in one weather station measuring temperature (°C), humidity (%), wind (m s‾ ¹) and precipitation type. The time format is: number of days from January 0, 0000, UTC.

en: A weather station (Lufft WS600) measured meteorological parameters at Klosters (LON: 9.880413, LAT: 46.869019). Detailed information on the specifications can be found [here](https://www.lufft.com/products/compact-weather-sensors-293/ws600-umb-smart-weather-sensor-1832/productAction/outputAsPdf/).

klosters

display_name: klosters

raclets

display_name: raclets

weather

display_name: weather

wind

display_name: wind


global-cryosphere-watch-data-survey

maintainer: Mathias Bavay

title_for_slug: global-cryosphere-watch-data-survey

en: automatic-publication data-usage data-exchange gcw data-portal

en: Data interoperability survey

en: Third party data usage

en: Two surveys on the topic of data usage where conducted for the Global Cryosphere Watch data portal. The first one focused on the data provider point of view while the second one focused on the data user point of view. 37 data providers (ie institutions) worldwide provided their answers for the first survey (from fall 2017 until summer 2018) while 54 users (contacted through various mailing list such as the Cryolist) answered the questions on their third party data usage (fall 2019 until January 2020).

automatic-publication

display_name: automatic-publication

data-exchange

display_name: data-exchange

data-portal

display_name: data-portal

data-usage

display_name: data-usage

gcw

display_name: gcw

en: Global Cryosphere Watch data survey


maintainer: Jana von Freyberg

en: snowpack-outflow stable-water-isotopes solutes snowmelt-lysimeter snowmelt-rate

en: The dataset contains volumes, solutes and stable water isotopes of snowpack outflow at daily resolution. 10-minute data are provided of the measurements taken by three snowmelt lysimeter systems at spatially-distributed locations.

en:
This data contain volumes, solutes and isotopes of snowpack outflow measured by a snowmelt lysimeter system at three locations in the southern Alp catchment, situated Central Switzerland. The river Alp is a snow-dominated catchment situated in Central Switzerland characterized by an elevation range from 840 to 1898 m a.s.l.
The dataset provides solutes (major anions and cations, trace metals) and stable water isotopes and water fluxes (snowpack outflow volumes) at daily intervals from several sampling locations. Additionally, the data measured by the snowmelt lysimeter system are provided in 10-minute resolution.

snowmelt-lysimeter

display_name: snowmelt-lysimeter

snowmelt-rate

display_name: snowmelt-rate

snowpack-outflow

display_name: snowpack-outflow

solutes

display_name: solutes

stable-water-isotopes

display_name: stable-water-isotopes

education

en: Education and science

en: Daily data of the volumes, solutes and isotopes in snowpack outflow measured at three locations in the southern Alp catchment


en: snow-precipitation precipitation-variability complex-terrain orographic-precipitation cosmo-wrf

en: StationData

en: Snow depth maps over Dischma valley for 26 January 2016 and 9 March 2016 and snow depth differences between the two dates.

en:
The data presented here corresponds to the publication "Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain" (Gerber et al., 2018a), which investigates the precipitation variability of snow precipitation in the central northern part of the Grisons (CH) and the publication "The importance of near-surface winter precipitation processes in complex alpine terrain" (Gerber et al., 2018b). The dataset contains:

* WRFsimulations: WRF simulation output for simulations with 4x (14x) terrain smoothing with an output timestep of 30 min/5 min and horizontal grid spacings of 1350 m, 450 m, 150 m and 50 m (currently: data available upon request).
* StationData: Meteorological station data of 18 meteorological stations in the central northern part of the Grisons with 30 minute resolution for the period 1 January 2016 till 1 May 2016.
* ADS80data: Photogrammetrically determined snow depth distribution data over the Dischma valley for the 26 January 2016 and 9 March 2016. Snow heights are corrected for buildings, vegetation (> 1m), outliers, and pixles, which are obivously snow-free on the pictures (Bühler et al., 2015). In addition the snow depth differences (snow depth on 9 March 2016 minus snow depth on 26 January 2016) are provided.

For more details about the simulation and observation data, see Gerber et al., 2018 and Gerber and Sharma (2018).

Publications:

Bühler, Y., Marty, M., Egli, L., Veitinger, J., Jonas, T., Thee, P., and Ginzler, C.: Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9, 229–243, doi:10.5194/tc-9-229-2015, 2015.

Gerber, F., Besic, N., Sharma, V., Mott, R., Daniels, M., Gabella, M., Berne, A., Germann, U., and Lehning, M.: Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain, The Cryosphere, 12, 3137–3160, doi:10.5194/tc-12-3137-2018, 2018.

Gerber, F., Mott, R. and Lehning, M.: The importance of near-surface winter precipitation processes in complex alpine terrain, Journal of Hydrometeorology, accepted, 2018.

Gerber, F., and Sharma, V.: Running COSMO-WRF on very-high resolution over complex terrain. Laboratory of Cryospheric Sciences CRYOS, École Polytechnique Fédérale de Lausanne EPFL, Lausanne, Switzerland. doi:10.16904/envidat.35, 2018.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

orographic-precipitation

display_name: orographic-precipitation

precipitation-variability

display_name: precipitation-variability

snow-precipitation

display_name: snow-precipitation

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: DISCHMEX - High-resolution WRF simulations in complex alpine terrain and station measurements


en: davos foresty treeline-ecosystems afforestation stillberg mountain-forest

en: Dataset V1

media_type: GDB

en: This dataset has been depricated in favour of an updated version.

format: GDB

en: Site photo

media_type: JPEG

en: Documentation

media_type: application/msword

mimetype: application/msword

en:
#Background Information

A history of many centuries of seasonal livestock grazing of alpine pastures has significantly depressed the treeline in many European mountain ranges. Therefore, observations of treeline patterns are more likely to be obscured by historical land use than in regions with less human influence and might not provide relevant information about environmental factors that influence mortality and growth patterns at the natural high-elevation limit of tree existence. To overcome this, we used a large afforestation experiment in the Swiss Alps, "Stillberg", to address the following questions:

Can trees survive above the current treeline in the European Alps? Are environmental factors that influence spatial patterns of mortality the same as those that influence height growth? Does the relative importance of these environmental variables change over the first 40 years after planting as seedlings?

#Dataset
The 5 ha Stillberg long-term afforestation research area is located near Davos (Central Alps, Switzerland). The bottom of the afforestation is approximately at the current treeline and it covers an altitudinal gradient of more than 150 m (2075 to 2230 m a.s.l.; see picture above). Approximately 92'000 seedlings of three treeline species (Larix decidua, Pinus mugo ssp. uncinata and Pinus cembra) were systematically planted in 1975, and mortality and height growth were closely monitored during the following 40 years.

Publications
Barbeito, I., Dawes, M. A., Rixen, C., Senn, J. and Bebi, P. (2012), Factors driving mortality and growth at treeline: a 30-year experiment of 92 000 conifers. Ecology, 93: 389–401. http://dx.doi.org/10.1890/11-0384.1

afforestation

display_name: afforestation

davos

display_name: davos

foresty

display_name: foresty

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline-ecosystems

display_name: treeline-ecosystems

en: Long-term treeline research dataset at Stillberg, Davos