maintainer: Anita Risch

en: grassland vertebrates invertebrates ecosystem-coupling ecosystem-multifunctionality exclusion swiss-national-park subalpine ecosystem-functions grazing

en: Datafile

en:
ID: Plot ID composited of Fence & Treatment number (90 plots total)

Grassland: Name of the six subalpine grasslands where the exclosure setups were erected. In large grasslands (GRIM, MING, STAB), we established four hierarchical exclosure setups (two in short- and two in tall-grass vegetation), whereas in the small grasslands (BOTS, DADA, MARG) only one setup was erected per vegetation type. BOTS = Val dal Botsch, GRIM = Grimmels, MING = Val Mingér, STAB = Alp Stabelchod, DADA = Stabelchod da daint, MARG = Margunet

Fence: Number of exclosure setup (1 - 18). Note that uneven numbers (1,3,5,7,9,11,13,15,17) represent setups established on short-grass vegetation, even numbers (2,4,6,8,10,12,14,16,18) setups established in tall-grass vegetation
Vegetation	Vegetation type, 1 = short-grass vegetation, 2 = tall-grass vegetation; (9 replicate fences on each vegetation type)
Treatment	Progressive animal exclusion, numbers indicate which animals had access to the plot: 1 = Large/medium/small mammals, and invertebrates have access ("L/M/S/I"), 2 = Medium/small mammals, and invertebrates have access (“M/S/I”), 3 = Small mammals and invertebrates have access (“S/I”), 4 = Invertebrates have access (“I”), 5 = No animals have access (“None”)

Bulkden:	Fine fraction soil bulk density (g cm-3)

Soil.moist	: Soil moisture (%)

Soil.org.C: Rhizosphere soil C content (%)

pH: Soil pH

Nema.PC1: First principal component (PC1) of principal component analysis (PCA) of the soil nematode community composition

Nema.PC2: Second principal component (PC2) of principal component analysis (PCA) of the soil nematode community composition

Micro.PC1: 	First principal component (PC1) of principal component analysis (PCA) of the soil microbial community composition

Micro.PC2: Second principal component (PC2) of principal component analysis (PCA) of the soil microbial community composition

Abv.Inv.PC1: First principal component (PC1) of principal component analysis (PCA) of the aboveground-dwelling invertebrate community composition

Abv.Inv.PC2: Second principal component (PC2) of principal component analysis (PCA) of the aboveground-dwelling invertebrate community composition

Arthr.PC1: First principal component (PC1) of principal component analysis (PCA) of the soil arthropod community composition

Arthr.PC2: Second principal component (PC2) of principal component analysis (PCA) of the soil arthropod community composition

Plant.PC1: First principal component (PC1) of principal component analysis (PCA) of the plant community composition

Plant.PC2: Second principal component (PC2) of principal component analysis (PCA) of the plant community composition

Root.biomass: Root biomass (g m-2)

Micro.biomass	: Microbial biomass carbon (mg kg-1)

Plant.richness: Plant species richness

Plant.N: Plant tissue nitrogen content (%)

Soil.N.min: Soil net nitrogen mineralisation (kg ha-1 season)

Soil.resp: Soil carbon dioxide emissions (soil respiration; g m-2 h-1)

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:
 > Risch AC, Ochoa-Hueso R, van der Putten WH, Bump JK, Busse MD, Frey B, Gwiazdowicz DJ, Page-Dumroese DS, Vandegehuchte ML, Zimmermann S, Schütz M. Size-dependent loss of aboveground animals differentially affects grassland ecosystem coupling and functions. 2018. Nature Communications 9: 3684. [doi: 10.1038/s41467-018-06105-4](https://doi.org/10.1038/s41467-018-06105-4).

Please cite this paper together with the citation for the datafile.

#Methods
Study sites
The experimental exclosure setups were installed within the SNP (IUCN category Ia preserve; Dudley 2008), in south-eastern Switzerland. The park covers 172 km2 of forests and subalpine and alpine grasslands along with scattered rock outcrops and scree slopes. The entire area has been protected from human impact (no hunting, fishing, camping or off-trail hiking) since 1914. Large, fairly homogenous patches of short- and tall-grass vegetation, which originate from different historical management and grazing regimes, cover the park’s subalpine grasslands entirely. Short-grass vegetation developed in areas where cattle used to rest (nutrient input) prior to the park’s foundation (14th century to 1914) (Schütz and others 2003, 2006) and is dominated by lawn grass species such as Festuca rubra L., Briza media L. and Agrostis capillaris L. (Schütz and others 2003, 2006). Today, this vegetation type is intensively grazed by diverse vertebrate and invertebrate communities that inhabit the park and consume up to 60% of the available biomass (Risch and others 2013). Tall-grass vegetation developed where cattle formerly grazed, but did not rest, and is dominated by rather nutrient-poor tussocks of Carex sempervirens Vill. and Nardus stricta L. (Schütz and others 2003, 2006). This vegetation type receives considerably less grazing, with only roughly 20% of the biomass consumed (Risch and others 2013). Consequently, the two vegetation types together represent a long-term trajectory of changes in grazing regimes. Underlying bedrock of all grasslands is dolomite, which renders these grasslands rather poor in nutrients regardless of former and current land-use regimes.
Experimental design
To progressively exclude aboveground vertebrate and invertebrate animals, we established 18 size-selective exclosure setups (nine in short-grass, nine in tall-grass vegetation) distributed over six subalpine grasslands across the SNP (Risch and others 2013, 2015). Elevation differences of exclosure locations did not exceed 350 m (between 1975 and 2300 m a.s.l.). The exclosures were established immediately after snowmelt in spring 2009 and were left in place for five consecutive growing seasons (until end of 2013). They were, however, temporarily dismantled every fall (late October after first snowfall) to protect them from avalanches. They were re-established in the same location every spring immediately after snowmelt. Each size-selective exclosure setup consisted of five plots (2 x 3 m) that progressively excluded aboveground vertebrates and invertebrates from large to small. The plots are labelled according to the guilds that had access to them “L/M/S/I”, “M/S/I”, “S/I”, “I”, “None”; L = large mammals, M = medium mammals, S = small mammals, I = invertebrates, None = no animals had access. As we only had permission to have the experimental setup in place for five consecutive growing seasons, the experiment had to be completely dismantled in the late fall of 2013 and all material removed from the SNP.
Our exclosure design was aimed at excluding mammalian herbivores, but naturally also excluded the few medium and small mammalian predators, as well as the entire aboveground invertebrate food web. A total of 26 large to small mammal species can be found in the SNP, but large apex predators are missing (wolf, bear, lynx) . Reptiles, amphibians and birds are scarce to absent in the subalpine grasslands under study. Only two reptile species occur in the park and they are confined to rocky areas that warm up enough for them to survive. One frog species spawns in an isolated pond far from our grasslands. Only three bird species occasionally feed on the subalpine grasslands. Using game cameras (Moultrie 6MP Game Spy I-60 Infrared Digital Game Camera, Moultrie Feeders, Alabaster, AL, USA), we did observe that the medium- and small-sized mammals (marmot/hares and mice) were not afraid to enter the fences and feed on their designated plots. We never spotted reptiles, amphibians or birds on camera. We distinguished between 59 higher aboveground-dwelling invertebrate taxa that our size-selective exclosures excluded (see also methods for aboveground-dwelling invertebrates below).
The “L/M/S/I” plot (not fenced) was located at least 5 m from the 2.1 m tall and 7 x 9 m large main electrical fence that enclosed the other four plots. The bottom wire of this fence was mounted at 0.5 m height and was not electrified to enable safe access for medium and small mammals, while fencing out the large ones. Within each main fence, we randomly established four 2 x 3 m plots separated by 1-m wide walkways from one another and from the main fence line: 1) the “M/S/I” plots were unfenced, allowing access to all but the large mammals; 2) the “S/I” plots (10 x 10 cm electrical mesh fence) excluded all medium-sized mammals. Note that the bottom 10 cm of this fence remained non-electrified to enable safe access for small mammals; 3) the “I” plots (2 x 2 cm metal mesh fence) excluded all mammals. We double-folded the mesh at the bottom 50 cm to reduce the mesh size to smaller than 1 x 1 cm openings; and 4) the “None” plots were surrounded by a 1 m tall mosquito net (1.5 x 2 mm) to exclude all animals. The top of the plot was covered with a mosquito-meshed wooden frame mounted to the corner posts (roof). We treated these plots a few times with biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) to remove insects that might have entered during data collection or that hatched from the soil, but amounts were negligible and did not impact soil moisture conditions within these plots.
To assess whether the design of the “None” exclosure (mesh and roof) affected the response variables within the plots and, therefore, influenced the results, we established an additional six “micro-climate control” exclosures (one in each of the six grasslands) (Risch and others 2013, 2015). These exclosures were built as the “None” exclosures but were open at the bottom (20 cm) of the 3-m side of the fence facing away from the prevailing wind direction to allow invertebrates to enter. A 20-cm high and 3-m long strip of metal mesh was used to block access to small mammals. Thus, this construction allowed a comparable micro-climate to the “None” plots, but also a comparable feeding pressure by invertebrates to the “I” plots. We compared various properties within these exclosures against one another to assess if our construction altered the conditions in the “None” plots. We showed that differences in plant (e.g., vegetation height, aboveground biomass) and soil properties (e.g., soil temperature, moisture) found between the “I” and the “None” treatments were not due to the construction of the “None” exclosure, but a function of animal exclusions, although the amount of UV light reaching the plant canopy was significantly reduced (Risch and others 2013).
Aboveground invertebrate sampling
Aboveground invertebrates were sampled with two different methods to capture both ground- and plant-dwelling organisms: 1) we randomly placed two pitfall traps (67 mm in diameter, covered with a roof) filled with 20% propylene glycol in one 1 x 1 m subplot of the 2 x 3 m treatment plots in spring 2013 (May) and emptied them every two weeks until late September 2013 (Vandegehuchte and others 2017b, 2018). A pitfall trap consisted of a plastic cylinder (13 cm depth, 6.75 cm diameter). Within each cylinder we placed a 100 ml plastic vial with outer diameter 6.70 cm and on top of the cylinder we placed a plastic funnel to guide the invertebrates into the vials. Each trap was cover with a cone-shaped and transparent plastic roof to protect the trap from rain (Vandegehuchte and others 2017b, 2018). Note that in the “None” plots only one trap was placed as control to check for effectiveness of the exclosure. 2) We vacuumed all invertebrates from a 60 x 60 cm area on another 1 x 1 m subplot with a suction sampler (Vortis, Burkhard manufacturing CO, Ltd., Rickmansworth, Hertfordshire, UK) every month from June to September 2013 (Vandegehuchte and others 2017b, 2018). For this purpose, we quickly placed a square plastic frame (60 x 60 x 40 cm) with a closable mosquito mesh sleeve attached to the top edge into the plot from the outside. The suction sample was then inserted into through the sleeve and operated for 45 s to collect the invertebrates (Vandegehuchte and others 2017b, 2018).
We sorted the ≈100 000 individuals collected with both methods by hand and identified each individual morphologically to the lowest taxonomic level feasible (59 taxa, including orders, suborders, subfamilies, families; phylum for Mollusca). These taxa belonged to the following feeding types: 19 herbivores, 16 detritivores, 9 predators, 8 mixed feeders, 5 omnivores and 2 non-classified feeders (or not feeding as adults) (Vandegehuchte and others 2017b). We summed the numbers from the two pitfall traps and the suction sampling over the course of the 2013 season to represent the aboveground invertebrate abundance and community composition of a plot. Note: we did not specifically attempt to catch flying invertebrates with e.g., sticky traps, thus a few flying insects may have been missed with our vacuum sampling approach.
Sampling of plant properties
The vascular plant species composition was assessed at peak biomass every summer (July) by estimating the frequency of occurrence of each species with the pin count method in each plot (Frank and McNaughton 1990). A total of 172 taxa occurred within our 90 plots and we calculated plant species richness for each plot separately. We used the 2013 data in this study. Plant quality was assessed every year in July and September; here we use plant quality at the end of the experiment (September 2013). Two 10 x 100 cm wide strips of vegetation per plot were clipped, combined, dried at 65°C, and ground (Pulverisette 16, Fritsch, Idar-Oberstein, Germany) to pass through a 0.5 mm sieve. Twenty randomly selected samples across all treatments were analysed for N (Leco TruSpec Analyser, Leco, St. Joseph, Michigan, USA) (Vandegehuchte and others 2015). Nitrogen concentrations of the other samples were then estimated from models established for the experiment and the entire SNP relating Fourier transform-near infrared reflectance (FT-NIR) spectra to the measured values of N using a multi-purpose FT-NIR spectrometer (Bruker Optics, Fällanden, Switzerland) (Vandegehuchte and others 2015). Root biomass was sampled every fall by collecting five 2.2 cm diameter x 10 cm deep soil samples (Giddings Machine Company, Windsor, CO, USA) per plot (450 samples year-1). The samples were dried at 30 °C and roots were sorted from the sample by hand. We sorted each sample for 1 h which allowed to retrieve over 90% of all roots present in the samples (Risch and others 2013). The roots were then dried at 65 °C for 48 and weighed to the nearest mg. We averaged the values per plot and used the 2013 data only in this study.
Sampling of edaphic communities
In 2009, 2010, and 2011 we collected three composited soil samples (5 cm diameter x 10 cm depth; AMS Samplers, American Falls, ID, USA) and assessed bacterial community structure using T-RFLP profiling (Liu and others 1997; Blackwood and others 2003; Hodel and others 2014). We detected a total of 89 operational taxonomic units (OTUs). These values are in accordance with other studies reporting OTU richness (Wirthner and others 2011; Zumsteg and others 2012; Meola and others 2014) using T-RFLP profiling, a method that detects the most abundant, and thus likely, the most relevant, taxa. We averaged the data over the three years of collections for our calculations. Microbial biomass carbon (MBC) was determined with the substrate-induced method (Anderson and Domsch 1978) every fall (September) between 2009 and 2013 by collecting three mineral soil samples (5 cm diameter × 10 cm mineral soil core, AMS Samplers, American Falls, ID, USA). The three samples were combined (90 samples for each sampling year), immediately put on ice, taken to the laboratory, passed through a 2-mm sieve and stored at 4°C. Again, we only used the 2013 data in this study.
Soil samples (5 cm diameter x 10 cm depth) to extract soil arthropods were collected in June, July, and August 2011 with a soil corer lined with a plastic sleeve to ensure an undisturbed sample (total of 270 samples). The plastic line core was immediately sealed on both ends using cling film and put into a cooler. All plots were sampled within three days and the extraction of arthropods started the evening of the sampling day using a high-gradient Tullgren funnel apparatus (Crossley and Blair 1991; Vandegehuchte and others 2015). Samples were kept in the extractor for four days and the soil arthropods were collected in 95% ethanol. All individuals were counted and each individual was identified morphologically to the lowest level feasible [76 taxa, including orders, suborders, subfamilies, families (Protura, Thysanoptera, Aphidina, Psylina, Coleoptera, Brachycera, Nematocera, Auchenorryncha, Heteroptera, Formicidae); sub-phylum for Myriapoda, for Acari and Collembola also including morpho-species). Note that we also included larval stages (nine of the 76 taxa) (Vandegehuchte and others 2015). All data were summed over the season. A detailed species list for mites and collembolans is published (Vandegehuchte and others 2017a) [https://doi.org/10.1371/journal.pone.0118679.s001]. Earthworms are rare in the SNP and therefore were not included. We collected eight random 2.2 cm diameter x 10 cm deep soil cores from each plot in September 2013 to determine the soil nematode community composition. The samples were mixed and the nematodes were extracted from 100 ml of fresh soil using Oostenbrink elutriators (Oostenbrink 1960). All nematodes in a 1 ml of the 10 ml extract were counted, a minimum of 150 individuals sample-1 were identified to genus or family level using (Bongers 1988), the numbers of all nematodes were extrapolated to the entire sample and expressed for a 100 g dry sample. In total we identified 63 genus or family levels (Vandegehuchte and others 2015). The list of all the nematodes found is published (Vandegehuchte and others 2015) [http://www.oikosjournal.org/appendix/oik-03341] or DOI: [doi: 10.1111/oik.03341].
We are aware that sampling soil microbes from 2009 to 2011 and soil arthropods in 2011 was not ideal, but we are positive that this does not bias the results. Most of the parameters measured in our experiment either already showed a treatment response after the first growing season (e.g., plant biomass) or did not respond over the entire time experiment (e.g., microbial biomass C). The microbial community composition (2009 – 2011) was highly influenced by inter-annual differences in temperature and precipitation, but did not differ between treatments or vegetation types (Hodel and others 2014). We therefore felt comfortable using the 2009 through 2011 data for describing the soil microbial community in our experimental treatments. Similarly, we are positive that our soil arthropod data are representative. We did assess soil arthropods in August 2012 and found no differences to the August 2011 data. However, we did not feel comfortable combining the 2011 June, July, August data with only August data for 2012 for our analyses.
Sampling of soil properties
We collected three soil samples (5 cm diameter x 10 cm depth) in each plot in September 2013 after removing the vegetation. First, we collected the top layer of mineral soil rich in organic matter, the surface organic layer or rhizosphere, typically 1 to 3 cm in depth with a soil corer (AMS Samples, American Falls, Idaho, USA). Second, we collected a 10 cm mineral soil core beneath this surface layer. The cores for each layer were composited, dried at 65 °C for 48 h and fine-ground to pass a 0.5 mm screen. We then analysed all samples for total C using a Leco TruSpec Analyser (Leco, St. Joseph, Michigan, USA). Mineral soil pH was measured potentiometrically in 1:2 soil:CaCl2 solution with an equilibration time of 30 min.
Soil net N mineralisation was assessed during the 2013 growing season (Risch and others 2015). For this purpose, we randomly collected a 5 cm diameter x10 cm deep soil sample with a soil corer (AMS Samples, American Falls, Idaho, USA) after clipping the vegetation in June 2013. After weighing and sieving (4 mm mesh) the soil, we extracted a 20 g subsample in 1 mol l-1 KCl for 1.5 h on an end-over-end shaker and thereafter filtered it through ashless folded filter paper (DF 5895 150, ALBET LabScience, Hahnenmühle FineArt GmbH, Dassel, Germany). From these filtrates NO3- concentrations were measured colorimetrically (Norman and Stucki 1981) and NH4+with flow injection analysis (FIAS 300, Perkin Elmer, Waltham Massachusetts, USA) (Risch and others 2015). We dried the rest of the sample 105 °C to constant mass to determine fine,fraction bulk density. A second soil sample was collected within each plot in June 2013 with a corer lined with a 5 x 13 cm aluminium cylinder. The corer was driven 11.5 cm deep into the soil so that the top 1.5 cm of the cylinder remained empty. Into this space we placed a polyester bag (250 µm) filled an ion-exchanger resin to capture the incoming N. The bag was filled with a 1:1 mixture of acidic and alkaline exchanger resin (ion-exchanger I KA/ion exchanger IIIAA, Merck AG, Darmstadt, Germany). We then removed 1.5 cm soil at the bottom of the cylinder and placed a second resin exchanger bag into this space to capture the N leached from the soil column. To assure that the exchange resin was saturated with H+ and Cl- prior to filling the bags, the mixture was stirred with 1.2 ml l-1 HCl for 1 h and then rinsed with demineralized water until the electrical conductivity of the water reached 5 µm cm-1. The cylinder with the resin bags in place was reinserted into the soil with the top flush to the soil surface and incubated for three months. We recollected the cylinders in September 2013. Each resin bag and 20 g of sieved soil (4 mm mesh) from each cylinder were then separately extracted with KCl and NO3- and NH4+ concentrations were measured. Nitrate and NH4+ concentrations of all samples were then converted to a content basis by multiplying their values with fine fraction bulk density. Net N mineralisation was thereafter calculated as the difference between the N content of the samples collected at the end of the three-month incubation (including the N extracted from the bottom resin bag) and the N content at the beginning of the incubation (Risch and others 2015).
Soil CO2 emissions were measured every two weeks between 0900 and 1700 hrs from early May through late September 2013 with a PP-Systems SRC-1 soil respiration chamber (15 cm high, 10 cm diameter; closed circuit) attached to a PP-Systems EGM-4 infrared gas analyser (PP-Systems, Amesbury, MA, USA) on two locations per plot (Risch and others 2013). The chamber was placed on randomly placed, permanently installed PVC collars (10 cm diameter) driven 5 cm into the soil at the beginning of the study (Risch and others 2013). Freshly germinated plants growing within the collars were removed prior to each measurement to avoid measuring plant respiration or photosynthesis. The two measurements collected per plot and sampling date were averaged.
Soil moisture (with time domain reflectometry; Field-Scout TDR-100, Spectrum Technologies, Plainfield, Illionois, USA) and temperature (with a waterproof digital pocket thermometer; Barnstead International, Dubuque, Iowa, USA) were measured at five random locations per plot every two weeks during the growing seasons during the experiment for the 0 to 10 cm depth (Risch and others 2013, 2015). As soil moisture and soil temperature were highly negatively correlated (Risch and others 2013), we only used soil moisture for this study. We used plot-level averages of all values available to capture soil moisture variability during the five years of the experiment. The results remained unchanged when we only used soil moisture from the 2013 growing season.
Numeral calculations and statistical analyses
Ecosystem coupling. We conducted principal component analyses (PCAs; unscaled) at the complete dataset level using the abundances of each taxonomical entity to describe each of the five different communities used in this study: aboveground-dwelling invertebrates, vascular plants, soil microorganisms, soil arthropods and soil nematodes. We retained the first two components (PCA axis 1 and PCA axis 2) of each analysis as we found them to adequately represent the temporal and spatial variability of our 90 treatment plots in previous studies55,67. Together they explained a total of 71.70% of the variation for aboveground invertebrates, 44.36% for plants, 44.85% for soil microorganisms, 61.85% for soil arthropods and 77.19% for soil nematodes. In addition, we used soil pH and soil organic C content as a proxy for soil chemical properties, soil bulk density as a proxy for soil physical properties and soil moisture (negatively correlated with soil temperature) as a proxy for soil micro-climatic conditions for an overall total of fourteen constituents.
We calculated ecosystem coupling9 for each exclosure treatment within each vegetation type (i.e., 2  5 treatment combinations in total) as an integrated measure of pairwise ecological interactions between ecosystem constituents representing ecological communities and the soil abiotic environment. These ecological interactions are defined by non-parametric Spearman rank correlation analyses between two constituents, excluding interactions involving two abiotic constituents (e.g., soil pH vs. soil moisture) and interactions between the first (PC1) and second (PC2) component of each community type, as these are orthogonal by definition. Interactions between abiotic constituents were excluded from the analyses because the focus of our study was on communities and how they interact with one another and their surrounding environment; therefore, including abiotic-abiotic interactions was not of interest here. Given that the effectiveness of our experimental design resulted in that no community composition data of aboveground-dwelling invertebrates was available for the “None” plots (all animals excluded), only thirteen instead of fourteen constituents were included in the ecosystem coupling calculations for this treatment. The complete absence of aboveground invertebrates represents the most extreme case of disturbance between aboveground animal communities and the rest of the ecosystem constituents. This may have resulted in a slight overestimation of ecosystem coupling for these plots.
	Average ecosystem coupling was calculated as follows:
Ecosystem coupling=
where Xi is the absolute Coupling was calculated value of the Spearman’s rho coefficient of the ith correlation for each treatment within each vegetation type (i.e., based on nine replicates each), considering and n is the number of pairwise comparisons considered (n = a total of 80; interactions (56 in the case of the “None” treatment). We considered a total of 40 biotic-biotic interactions (i.e., concerning two community-level principal components such as plants and microbes; 24 in the case of the “None” treatment) and 40 abiotic-biotic (i.e., concerning one community-level principal component and one abiotic factor, e.g., plant community and soil properties; 32 in the case of the “None” treatment).	Coupling was calculated for each treatment within each vegetation type (i.e., based on nine replicates each), considering a total of 80 interactions (56 in the case of the “None” treatment). We considered a total of 40 biotic-biotic interactions (i.e., concerning two community-level principal components such as plants and microbes; 24 in the case of the “None” treatment) and 40 abiotic-biotic (i.e., concerning one community-level principal component and one abiotic factor, e.g., plant community and soil properties; 32 in the case of the “None” treatment).
To establish whether constituents were significantly and positively coupled within treatments (i.e., the average of their correlation coefficients were greater than in a null model where correlation only happens by chance), we calculated one-tailed p-values based on permutation tests with 999 permutations.

We considered six ecosystem functions and process rates commonly used to assess ecosystem functioning (Meyer and others 2015; Manning and others 2018). Plant N content represents a measure of forage quality, while plant richness has been shown to stabilise biomass production, thus allowing the system to respond to changes in herbivory. Soil net N mineralisation, soil respiration, root biomass, and microbial biomass represent fluxes or stocks of energy. For all functions and processes higher values represent higher functioning (Manning and others 2018). All these variables were measured in the last year of the experiment (2013). We then quantified ecosystem multifunctionality using the multiple threshold approach (Byrnes and others 2014; Manning and others 2018), which considers the number of functions that are above a certain threshold, over a series of threshold values (typically 10-99%) that are defined based on the maximum value of each function. We weighted all our functions equally for these calculations (Manning and others 2018). The number of functions in a plot with values higher than a given threshold value for the respective function is summed up. The sum represents ecosystem multifunctionality for that plot. Given that choosing any particular threshold as a measure of ecosystem multifunctionality is arbitrary, we calculated the average of thresholds from 10-90% (in 10% intervals) as a more integrated representation of ecosystem multifunctionality.
We used Pearson correlations to explore the relationships between ecosystem coupling (all interactions, biotic-biotic interactions, abiotic-biotic interactions involving above- and belowground constituents, and all interactions, biotic-biotic interactions, abiotic-biotic interactions involving belowground constituents only) and ecosystem multifunctionality by calculating the slopes of all relationships between ecosystem coupling and multifunctionality for all thresholds between 10 and 99%. We also related ecosystem coupling with the average of multifunctionality at thresholds between 30-80% as explained before and considered this correlation as a robust indication of the type of association between these two variables. In addition, we explored the relationships between ecosystem coupling (all interactions, biotic-biotic interactions, abiotic-biotic interactions involving above- and belowground constituents, and all interactions, biotic-biotic interactions, abiotic-biotic interactions involving belowground constituents only) and individual ecosystem functions. The effects of exclosures and vegetation type on individual functions and multifunctionality were evaluated using linear mixed effects models ('lme' function of the nlme package), with exclosure and vegetation type as fixed effects and fence as a random factor. All statistical analyses and numerical calculations were done in R version 3.4.0 (R Core Team 2016).

#References

- Anderson J, Domsch K. 1978. A physiological method for the quantitative measurement of microbial biomass in soil. Soil Biol Biochem 10:215–21.
- Blackwood CB, Marsh T, Kim S-H, Paul EA. 2003. Terminal Restriction Fragment Length Polymorphism Data Analysis for Quantitative Comparison of Microbial Communities. Appl Environ Microbiol 69:926–32. http://www.ncbi.nlm.nih.gov/pmc/articles/PMC143601/
- Bongers T. 1988. De nematoden von Nederland. Schoorl, The Netherlands: Pirola
- Byrnes JEK, Gamfeldt L, Isbell F, Lefcheck JS, Griffin JN, Hector A, Cardinale BJ, Hooper DU, Dee LE, Duffy JE. 2014. Investigating the relationship between biodiversity and ecosystem multifunctionality: Challenges and solutions. Methods Ecol Evol 5:111–24.
- Crossley DAJ, Blair JM. 1991. A high-efficiency low-technology Tulgren-type extractor for soil microarthopods. Agric Ecosyst Environ 34:187–92.
- Dudley N. 2008. Guidelines for applying protected area managment categories. Gland: IUCN
- Frank DA, McNaughton SJ. 1990. Aboveground biomass estimation with the canopy intercept method: A plant growth form caveat. Oikos 57:57–60.
- Haynes AG, Schütz M, Buchmann N, Page-Dumroese DS, Busse MD, Risch AC. 2014. Linkages between grazing history and herbivore exclusion on decomposition rates in mineral soils of subalpine grasslands. Plant Soil 374.
- Hodel M, Schütz M, Vandegehuchte ML, Frey B, Albrecht M, Busse MD, Risch AC. 2014. Does the aboveground herbivore assemblage influence soil bacterial community composition and richness in subalpine grasslands? Microb Ecol 68:584–95.
- Liu WT, Marsh TL, Cheng H, Forney LJ. 1997. Characterization of microbial diversity by determining terminal restriction fragment length polymorphisms of genes encoding 16S rRNA. Appl Environ Microbiol 63:4516–22. http://www.ncbi.nlm.nih.gov/pmc/articles/PMC168770/
- Manning P, van der Plas F, Soliveres S, Allan E, Maestre FT, Mace G, Whittingham MJ, Fischer M. 2018. Redefining ecosystem multifunctionality. Nat Ecol Evol 2:427–36. https://doi.org/10.1038/s41559-017-0461-7
- Meola M, Lazzaro A, Zeyer J. 2014. Diversity, resistance and resilience of the bacterial communities at two alpine glacier forefields after a reciprocal soil transplantation. Environ Microbiol 16:1918–34. https://onlinelibrary.wiley.com/doi/abs/10.1111/1462-2920.12435
- Meyer ST, Koch C, Weisser WW. 2015. Towards a standardized Rapid Ecosystem Function Assessment (REFA). Trends Ecol Evol 30:390–7. http://www.sciencedirect.com/science/article/pii/S0169534715000968
- Norman R., Stucki JW. 1981. The determination of nitrate and nitrite in soil extracts by ultraviolet spectrophotometry. Soil Sci Soc Am J 45:347–53.
- Ochoa-Hueso R. 2016. Non-linear disruption of ecological interactions in response to nitrogen deposition. Ecology 87:2802–2814.
- Oostenbrink M. 1960. Estimating nematode populations by some selected methods. In: Sasser NJ, Jenkins WR, editors. Nematology. Chapel Hill, NC, USA: University of North Carolina Press. pp 85–101.
- R Core Team. 2016. R: A language and environment for statistical computing. Vienna, Austria: R Foundation for Statistical Computing
- Risch AC, Haynes AG, Busse MD, Filli F, Schütz M. 2013. The response of soil CO2 fluxes to progressively excluding vertebrate and invertebrate herbivores depends on ecosystem type. Ecosystems 16:1192–202.
- Risch AC, Schütz M, Vandegehuchte ML, Van Der Putten WH, Duyts H, Raschein U, Gwiazdowicz DJ, Busse MD, Page-Dumroese DS, Zimmermann S. 2015. Aboveground vertebrate and invertebrate herbivore impact on net N mineralization in subalpine grasslands. Ecology 96:3312–22.
- Schütz M, Risch AC, Achermann G, Thiel-Egenter C, Page-Dumroese DS, Jurgensen MF, Edwards PJ. 2006. Phosphorus translocation by red deer on a subalpine grassland in the Central European Alps. Ecosystems 9:624–633.
- Schütz M, Risch AC, Leuzinger E, Krüsi BO, Achermann G. 2003. Impact of herbivory by red deer (Cervus elaphus L.) on patterns and processes in subalpine grasslands in the Swiss National Park. For Ecol Manage 181:177–88.
- Vandegehuchte ML, van der Putten WH, Duyts H, Schütz M, Risch AC. 2017a. Aboveground mammal and invertebrate exclusions cause consistent changes in soil food webs of two subalpine grassland types, but mechanisms are system-speciﬁc. Oikos 126:212–23.
- Vandegehuchte ML, Raschein U, Schütz M, Gwiazdowicz DJ, Risch AC. 2015. Indirect short- and long-term effects of aboveground invertebrate and vertebrate herbivores on soil microarthropod communities. PLoS One 10:e0118679.
- Vandegehuchte ML, Schütz M, de Schaetzen F, Risch AC. 2017b. Mammal-induced trophic cascades in invertebrate food webs are modulated by grazing intensity in subalpine grassland. J Anim Ecol 86:1434–46.
- Vandegehuchte ML, Trivellone V, Schütz M, Firn J, de Schaetzen F, Risch AC. 2018. Mammalian herbivores affect leafhoppers associated with specific plant functional types at different timescales. Funct Ecol 32:545–55.
- Wirthner S, Frey B, Busse MD, Schütz M, Risch AC. 2011. Effects of wild boar (Sus scrofa L.) rooting on the bacterial community structure in mixed-hardwood forest soils in Switzerland. Eur J Soil Biol 47:296–302. http://dx.doi.org/10.1016/j.ejsobi.2011.07.003
- Zumsteg A, Luster J, Göransson H, Smittenberg RH, Brunner I, Bernasconi SM, Zeyer J, Frey B. 2012. Bacterial, Archaeal and Fungal Succession in the Forefield of a Receding Glacier. Microb Ecol 63:552–64. https://doi.org/10.1007/s00248-011-9991-8

ecosystem-coupling

display_name: ecosystem-coupling

ecosystem-functions

display_name: ecosystem-functions

ecosystem-multifunctionality

display_name: ecosystem-multifunctionality

exclusion

display_name: exclusion

grassland

display_name: grassland

grazing

display_name: grazing

invertebrates

display_name: invertebrates

subalpine

display_name: subalpine

swiss-national-park

display_name: swiss-national-park

vertebrates

display_name: vertebrates

en: Ecosystem coupling and multifunctionality - exclosure experiment


maintainer: Frank Techel

en: extended-column-test switzerland avalanche-danger avalanche-observations rutschblock-test norway

state: active

type: dataset

en: avalanche occurrence data (Norway, Sitzerland) - largest avalanche size per day and warning region

media_type: text/csv

format: CSV

mimetype: text/csv

en: ECT data (Norway, Switzerland)

en: Rutschblock data (Switzerland)

en: avalanche occurrence data (Norway, Sitzerland) - avalanche sizes per day and warning region

en:
Observational data used to quantitatively describe the key elements describing avalanche danger: snowpack stability, the frequency distribution of snowpack stability, and avalanche size.
The data set consists of
- Rutschblock test results (Switzerland)
- Extended Column Test results (Switzerland, Norway)
- Avalanche occurrence data (Switzerland, Norway).
The data were extracted from the respective operational databases of the national avalanche warning services in Switzerland (WSL Institute for Snow and Avalanche Research SLF Davos, Switzerland) and Norway (The Norwegian Water Resources and Energy Directorate NVE).
For further information regarding the data, please refer to the publication or contact the author.

avalanche-danger

display_name: avalanche-danger

avalanche-observations

display_name: avalanche-observations

extended-column-test

display_name: extended-column-test

norway

display_name: norway

rutschblock-test

display_name: rutschblock-test

switzerland

display_name: switzerland

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Stability tests, avalanche observations, Switzerland, Norway


maintainer: Axel Volkwein

en: field-test natural-hazard rockfall-experiments experiments field-tests field-data rockfall experiment impact-testing mass-movements

en: Acceleration measurements

media_type: application/zip

en: The zip file contains five excel files, one for each test conducted. The first sheet contains the raw data and a data set that went through a low-pass filter. The sheet "Allgemein" contains calibration factors for the sensors and time details of a test. The sheets "DiaDaten" and "DiaDatenGefiltert" show the measurements over time. The block and slab kinetics are determined in the sheets "ZeitintegrationBlock" and "ZeitintegrationPlatte". The sheet "VergleichBeschleunigungen" shows the influence of the low-pass-filter and a running average filter on the block accelerations.

format: ZIP

mimetype: application/zip

en: Video analysis

en: The zip contains five Excel-files that in turn contain the results of the performed video analyses. The sheet "Daten" contains the pixels of different positions on the blocks that were tracked by the software "Kinovea". The sheet "Auswertung" determines the block kinetics based on the pixel data over time.

en: Raw data (high speed videos, acceleration measurements, laboratory tests)

en:
This file contains

* the high speed videos showing the concrete blocks impacting the gallery roof.
* the raw data of the acceleration measurements
* the data of Tiefbauamt Graubünden containg the tension tests of gallery reinforcment, ME-testing the cushion layer and the tests on concrete samples.

en: Five full-scale field tests were conducted with concrete blocks weighting between 800 and 3200 kg being dropped onto the roof of a gallery structure made from reinforced concrete. The impacts were recorded using high-speed video and acceleration measurements at the falling blocks. The dataset contains the raw data as well as the analyses of the block trajectories, i.e. kinetics and dynamics. Setup of the measurements and the analyses conducted are published in Volkwein, A. "Durchführung und Auswertung von Steinschlagversuchen auf eine Stahlbetongalerie", WSL-Berichte, Heft 68, 2018.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

impact-testing

display_name: impact-testing

mass-movements

display_name: mass-movements

natural-hazard

display_name: natural-hazard

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

en: Rockfall gallery testing Parde 2016


aerosol-data-davos-wolfgang

maintainer: EnviDat Support

title_for_slug: aerosol-data-davos-wolfgang

en: aerosol particles ice-nucleation raclets inp drincz

en: SMPS Dataset Davos Wolfgang

media_type: application/x-netcdf

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity), in a temporal resolution of 2 minutes, with time in UTC, measured at Davos Wolfgang.

format: SERVICE

mimetype: application/x-netcdf

en: APS Dataset Davos Wolfgang

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Davos Wolfgang.

en: OPC GT-526S Dataset Davos Wolfgang

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en: OPC-N3 Dataset Davos Wolfgang

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: DRINCZ Dataset Davos Wolfgang

en: The DRINCZ file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs) and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3788 , TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and DRINCZ: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l minˉ¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the DRoplet Ice Nuclei Counter Zurich (DRINCZ, ETH Zurich) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

drincz

display_name: drincz

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

particles

display_name: particles

raclets

display_name: raclets

en: Aerosol Data Davos Wolfgang


en: switzerland landscape-services land-use-change land-use statistical-model urbanization modeling

en: Data for Assessing potential landscape service trade-offs driven by urbanization in Switzerland

en:
The provided folder structure follows the set up of the scripts.
Data is only provided when it has been fully produced by us, otherwise dummies are given.
For data that will be produced by one of the scripts, no dummies are given.
The folders may contain sub-folders, which would be filled if the scripts were all run

 00_Analysis_Data
Data produced throughout the process of the calibration and projection that is later needed for analysis

 01_Raw_Data
Primary data from external sources that were used to compile the rasters and numbers used during the calibration and projection of landscape transitions as well as service calculation

 02_Prepared_Data
Data that will be prepared for further use by scripts are put in here
Additionally it contains the parameter sheets for the transition predictors that we compiled

 03_Model_Data
 Model outputs
Folder were the projection models statistics will be saved
 Models
Folder into which the actual transition models will be saved
 Residuals
Folder into which data on models residuals will be saved for future use

 04_Projected_Data
The output of the projections will be saved into this folder

 05_Service_Data
Any service calculations will be saved in here

 06_Results_Analysis
Any Analysis plots and tables as well as intermediate data will be saved here in the respective sub-folder

en: Scripts for Assessing potential landscape service trade-offs driven by urbanization in Switzerland

en:
Scripts ordered by their main purpose within sequential folders in this ReadMe marked with

Within the folders the capital letters refer to the parallel or sequential use of the scripts; scripts here in ReadMe are marked with

 00_Function Scripts
 Functions.r
Script containing several functions for analyzing statistical models: cohen.kappa, meva.table, D2, max-Tss, plot-TSS

 Service_functions.R
Script containing functions for calculating all services and returning sums (and median for bd and rec) as well as rasters

 01_Data Preparation
 A_AS_raster_preparation.R
Preparation of the land use rasters for the years 1985, 1997, and 2009 based on the original Arealstatistik (AS/ASCH); Assigning our categories and assining new values to all "construction sites" for calibrating the models
For model projection starting point (2009) and for service calculations (all ASCH years) the "other" categories were assigned to the land use categories based on dominant neighbor, so that there were no empty cells
Creation of water & mountainous area raster that stayed stable throughout the projections
Creation of MFH raster (2009), to have as base for all new projection years, as this category never becames any other

 B_Factors_preparation.R
Preparation of the factor rasters that were used to calculate service values per cell (see Table 2): LWfactor, Transportation, Vol, Rivers, Lakes, slope, TWW, Hazard_risk

 B_Predictors_preparation.R
Preparation of the raster of the predictors used for calibrating (ASCH years) and projecting (stable) the transition models that do not depend on the land use categories: Temperature (ASCH years), solar radiation (stable), Public transportation access (stable), Elevation (stable), Workers density (ASCH years), Population change (ASCH transitions)

 B_Regions_preparation.R
Preparation of bioregions as raster to be used to mask asxxxx later to calculated services and land use area just for one region

 C_Pred_proj.R
Projecting the dynamic predictors into the future for projecting the land use transitions with the model: Linear extrapolations for workers densities and population; more detailed extrapolation of temperature (based on data for all stations that matched between the temp table we used for the calibration period and the projections from CS2M, and then making a spatial interpolation for all years based on the interpolation of temperature for all years per station)

 02_Model calibration
 A_Bioreg_pred_corr.R
Calculating correlation between the predictors for each bioregion and land use category, Output are those with too high correlation so that one predictor can be removed from transitions were both predictors occur

 A_trans_numbers_bioreg.R
Calculate transition numbers for each bioregion to decide which transitions to primarily consider

 B_Bioreg_ext_eval.R
Calculating TSS based on the external evaluation for the bioregion transitions that happened often enough to try to model them (calibration data: 85-97, evaluation data: 97-09)

 B_Bioreg_int_eval.R
Calculating TSS based on the internal evaluation for the bioregion transitions that happened often enough to try to model them (calibration data: 70%, evaluation data: 30%)

 C_Bioreg_TSS_analysis.R
Extracting TSS numbers from internal and external evaluation, calculating mean and median for each transition for each region for each evaluation method and saving as csv per region to be able to select only the transitions with high enough model performance

 D_Bioreg_Models_for_prediction.R
Calibration of the models that were then used to project land use transitions into the future; calibrated separately for each bioregion

 E_Residuals_trans_models.R
Calculation of Moran's I statistics to analyze the residuals of the land use transition models

 03_Projections
 A_Bioreg_Projections_run.R
Master script for: Extrapolaitng into the future with the regional models and then assembling for each time step to calculate new AS predictors; Several Outputs: txt file to test for NAs in Predictors, txt file with random seed number for sampling, txt file with times for calculation steps (check progress of script while running), csv sheet with projected transition frequencies, tif-rasters for every region and time step, pdf with raster plot for every region and time step

 04_Service calculation
 A_Bioreg_as_services.R
Calculate services per bioregion for years 1985, 1997, 2009

 A_Service_calculation_bioregions.R
Extracting service numbers(sums) per bioregions for all projection runs and storing them in a list of matrixes to be available for further plotting; can be run for swiss wide projections or regional ones

 05_Analysis
 A_Bioreg_ASCH_development.R
Extracting the occurrence of each category per region for all runs (first part), then for ASCH years, and then plotting them nicely; only works for regional projections

 A_Bioreg_Predictors_importanceD2.R
Calculating D2 for each transition and each considered predictor from bivariate models to get value of importance

 B_Bioreg_Pred_imp_analysis.R
Using calculated D2 to sort Predictors according to their importance for each transition

 A_Bioreg_Spatial_results_analysis.R
Plotting randomly sampled runs for ASCH and services to analyses their spatial development

 A_Bioreg_Transition_numbers_check_v1.R
Analyzing the frequency for all transitions for all regions and producing the point plots for each transition separately

 A_Bioreg_Transition_numbers_check_v2.R
Analyzing percentage and numbers of all transitions but plotting them per region and originating ASCH category

 B_Transition_Analysis.R
Further Analysis of transition numbers

 A_Service_analysis.R
Plotting of the service development for bioregions in several ways for analyzing

en:
Data and scripts of publication:

Madleina Gerecke, Oskar Hagen, Janine Bolliger, Anna M. Hersperger, Felix Kienast, Bronwyn Price, Loïc Pellissier (2019) Assessing potential landscape service trade-offs driven by urbanization in Switzerland. Palgrave communications.

Contains land use projections for Switzerland and scripts and data for these projections as well as the calculation of landscape services.

Data Folder:
Contains sub-folder with the data necessary for this study (provided were no copyright issues, otherwise placeholders with descriptions), and folders where produced data may be stored

Scripts Folder:
Contains scripts organized into subfolders depending on their purpose

Note: Some abbreviations within the scripts and data are derived from German words and not English.

land-use

display_name: land-use

land-use-change

display_name: land-use-change

landscape-services

display_name: landscape-services

modeling

display_name: modeling

statistical-model

display_name: statistical-model

switzerland

display_name: switzerland

urbanization

display_name: urbanization

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Land use projections and services for Switzerland


maintainer: Marcia Phillips

en: permafrost meteo-station permos borehole ritigraben

en: DATA ACCESS

media_type: SMET

en: Meterological station at the [Ritigraben permafrost borehole](http://www.envidat.ch/dataset/rit1) (RIT_0102) in canton Valais, Switzerland. The station is located at 2690 m asl on a flat site.

borehole

display_name: borehole

meteo-station

display_name: meteo-station

permafrost

display_name: permafrost

permos

display_name: permos

ritigraben

display_name: ritigraben

en: RIT2: Meteorological station at Ritigraben borehole site


maintainer: Giulia Mazzotti

en: snow-energy-balance snow-modelling snow-distribution forest-snow forest-structure

en: Meteo data to drive FSM2 model

en: Includes meteorological driving data used to run the forest snow model FSM2, processed and parsed in text files that match the format required by FSM2. Separate files are available for each field area (Laret, Drusatscha and Ischlag) and season (2012/13, 2013/14, 2014/15). Each file includes data for the period from October 1st to May 31st at hourly resolution.

en: Snow depth data forest sites

en: Contains all snow depth data acquired at all forest sites during winters 2012/13, 2013714 and 2014/15.

format: XLS

en: Snow depth data open sites

en: Contains all snow detph data accquired at open sites nearby the forest stands during the same period.

en: Grid point nomenclature

en: The grid structure of each forest site and the respective nomenclature applied to label individual points within each grid are outlined here.  Each point marks the location of snow depth measurements and co-located canopy structure parameters.

en: Canopy data

en: Includes all canopy structure metrics computed at all surveyed locations

en: Coordinates data

en: Includes coordinate information of each surveyed point (7 x 276 = 1932 forest points, 2 open areas)

en:
This dataset contains all snow, canopy and meteorological data presented and used in the publication: Mazzotti, G., Essery, R., Moeser, D. & Jonas T. (2020) 'Resolving spatial variability of forest snow using an energy-balance model with a 1-layer canopy'. Water Resources Research, https://doi.org/10.1029/2019WR026129.
This publication must be cited when using this dataset.

forest-snow

display_name: forest-snow

forest-structure

display_name: forest-structure

snow-distribution

display_name: snow-distribution

snow-energy-balance

display_name: snow-energy-balance

snow-modelling

display_name: snow-modelling

en: Snow depth, canopy structure and meterorological datasets from the Davos area, Switzerland, Winters 2012/13-2014/15, used for high-resolution forest snow modelling


maintainer: James W. Kirchner

en: deuterium plynlimon stable-water-isotopes tracer catchment chloride precipitation streamflow

en: 7-hourly stable water istopes

media_type: text/plain

en: Data set of 7-hourly stable water isotope data measured at Carreg Wen (precipitation) and Upper Hafren (streamflow).

format: TXT

mimetype: text/plain

en: Weekly stable water isotopes

en: Data set of weekly stable water isotope data collected at Carreg Wen (precipitation) and Lower Hafren and Tanllwyth (streamflow).

en: Data Set Documentation

media_type: application/pdf

en: This file contains a documentation of the data sets, including references to other helpful documentations.

format: PDF

mimetype: application/pdf

en: The data base contains timeseries of stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK. One data set contains weekly stable water isotope data from the Lower Hafren and Tanllwyth catchments, and the other data set contains 7-hourly stable water isotope data from Upper Hafren. Both data sets also include chloride concentrations in precipitation and streamflow.

catchment

display_name: catchment

chloride

display_name: chloride

deuterium

display_name: deuterium

plynlimon

display_name: plynlimon

precipitation

display_name: precipitation

stable-water-isotopes

display_name: stable-water-isotopes

streamflow

display_name: streamflow

tracer

display_name: tracer

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK


en: roads density buffer jupyter gis geospatial

en: Road Density Calculation (Python Notebook) online

media_type: url

media_type: ipynb

en: Plots

en: Random plot locations

en: Road data from OSM for the surroundings of Menzberg, Switzerland

en:
This dataset contains the road and plot data used for the geospatial analysis example showcased in "Fostering Open Science at WSL with the EnviDat Environmental Data Portal", a contribution to the 5th Open Source Geospatial Research and Education Symposium (OGRS), 2018.
The example uses Jupyter Notebook to calculate road densities in the neighbourhood of sample plot locations with Python. Road data were extracted from OpenStreetMap, while the point data (sample plots) were generated manually.

buffer

display_name: buffer

density

display_name: density

geospatial

display_name: geospatial

gis

display_name: gis

jupyter

display_name: jupyter

roads

display_name: roads

en: Dataset for OGRS 2018 publication


maintainer: Matthias Haeni

en: swiss-forest-lab wind-speed climate-change par relative-humidity meteo meteorology long-term precipitation temperature

en: Site photo of the forest station (JUB)

media_type: image/jpeg

en: Site photo of the forest station from the side.

mimetype: image/jpeg

en: Data plot of the field station (JUF)

en: Data file.

en: Site photo of the field station (JUF)

en: Site photo of the field station from the side.

en: Site aerial photo (Jussy)

en: Site aerial photo from both Jussy stations. Source: Google. 2016. Site aerial photo from both Jussy stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (JUB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Forest station data (JUB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Jussy in Switzerland where one station is located within a natural broad-leaved forest stand (JUB) with sessile oak (_Quercus petrea_; 90 yrs), aspen (_Populus tremula_; 60 yrs) and European hornbeam (_Carpinus betulus_; 60 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, JUF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Jussy is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Jussy, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: turbulence snow dust atmosphere hill deposition particles

en: preferential deposition patterns of all simulations performed

en: The data consist of matlab files. Each files contains a 2D array with the values of deposition at the surface nodes. Each array has Nx x Ny values. Please refer to the original paper for additional information on the spatial resolution and grid size.

en:
Preferential deposition of snow and dust over complex terrain is responsible for a wide range of environmental processes, and accounts for a significant source of uncertainty in surface mass balances of cold and arid regions. Despite the growing body of literature on the subject, previous studies reported contradictory results on the location and magnitude of deposition maxima and minima. This study aims at unraveling the governing processes of preferential deposition in neutrally stable atmosphere and to reconcile seemingly inconsistent results of previous works. For this purpose, a comprehensive modeling approach is developed, based on large eddy simulations of the turbulent airflow, Lagrangian stochastic model of particle trajectories, and immersed-boundary method to represent the underlying topography. The model performance is tested against wind tunnel measurements of dust deposition around isolated and sequential hills. A scale analysis is then performed to investigate the dependence of snowfall deposition on the particle Froude and Stokes numbers, which fully account for the governing processes of inertia, flow advection, and gravity. Additional simulations are performed, to test whether the often used assumption of inertialess particles yields accurate deposition patterns. We finally show that our scale analysis provides qualitatively similar results for hills with different aspect ratios.

This dataset contains the results of the LES-LSM model. Each Matlab file contains a 2D array of deposition values (in kg/m2) in each surface node (ix, iy) of the Cartesian grid. The file names are consistent with the simulation numbers listed in the original paper. For additional information, please refer to "Preferential deposition of snow and dust over hills: governing processes and relevant scales" by F. Comola, M. G. Giometto, S. T. Salesky, M. B. Parlange, and M. Lehning, Journal of Geophysical Research: Atmospheres, 2019.

atmosphere

display_name: atmosphere

deposition

display_name: deposition

dust

display_name: dust

hill

display_name: hill

particles

display_name: particles

snow

display_name: snow

turbulence

display_name: turbulence

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: sea-salt-aerosol ice arctic antarctica snow

en: Fig 1F_1

en: Individual data to mean shown in Figure 1F

en: Fig 1D

en: Data to Figure 1D

en: Read Me

en: Description of the data tables

en: Fig 1F_2

en: Table 2

en: This table lists all NEXAFS data files in chronological order with PE carbon to oxygen signal intensity ratios -from which the atomic ratio were calculated in the paper - before ("preCtoO") and after ("postCtoO") each NEXAFS measurement. Also listed is the change in Na ("lossSodi"), O ("lossOxy"), Cl ("lossChlor"), and C ("lossCarb") signal intensity after the NEXAFS measurement compared to prior to the NEXAFS measurement.

en: Fig 1F

en: Data to Figure 1F

en: Fig 1B

en: Data in Figure 1B

en: Code

media_type: m

en: Matlab code to read and plot the data

en: This table lists all data files in chronological order. "SampleTemp" refers to the reading of the PT-1000 at the side of the sample holder. "cellPressure" is the water vapour pressure during the measurements. From this, in presence of ice, the temperature of the ice sample can be calculated which is given in the column "iceTemp". "dT" is the difference, or temperature offset, between sensor's reading and the ice samples temperature. The offset is due to the sensor being mounted away from the cooled spot of the sample were it experiences heating from warmer parts of the sample holder. The off-set is used to calibrate the temperature sensor and the resulting temperature during the experiments is given in the column "temperature". "relHum" is the relative humidity above (supercooled) liquid and "concBrine" is the concentration of a NaCl solution in mol/l in equilibrium with ice at the experimental temperature. "Area" is the integrated PE signal.

en: Fig 1A

en: Data Figure 1A

en: Fig 1C

en: Data to Figure 1C

en: Fig 1B_1

en: Individual data to mean shown in Figure 1B

en: Fig 1B_2

en: Fib 1B_3

en: Laboratory experiments are presented on the phase change at the surface of sodium chloride – water mixtures at temperatures between 259 K and 240 K. High selectivity to the upper few nanometres of the frozen solution – air interface is achieved by using electron yield near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. We present the NEXAFS spectrum of the hydrohalite.

en: Data set on interfacial supercooling and the precipitation of hydrohalite in frozen NaCl solutions by X-ray absorption spectroscopy


en: snow-distribution snow-depth canopy-height forest-structure airborne-laser-scanning

en: Snow depth maps

en: Snow depth maps from two snow-on flights at each of the three field areas Davos (March 20th and 31st 2017), Engadien (March 20th and 31st, 2017) and Grand Mesa (February 8th and 16th, 2017)

en: Terrain elevation maps

en: Digital elevation model computed from snow-off flights for each of the field areas Davos, Engadine and Grand Mesa

en: Canopy height maps

en: Canopy height maps of each of the three field areas Davos, Engadine and Grand Mesa

en: Readme

en:
This dataset includes snow depth, canopy height and terrain elevation maps of forest stands in the Grisons (CH) and at Grand Mesa (CO,USA) derived from airborne lidar. Data were acquired i) within a pilot mission of NASA's Airborne Snow Observatory in the Swiss Alps in March 2017 and ii) during NASA’s SnowEx campaign at Grand Mesa in February 2017. Snow depth maps are available for two dates separated by approx.1 week, and include an area of ca. 0.5km2 for each of the three sites Davos, Engadine and Grand Mesa.
All data were presented and analyzed in the publication 'Revisiting Snow Cover Variability and Canopy Structure within Forest Stands: Insights from Airborne Lidar Data' (Mazzotti et al., 2019, WRR, doi: 10.1029/2019WR024898). This publication must be cited when using this dataset.

Paper Citation:
 > _Giulia Mazzotti; William Ryan Currier; Jeffrey S. Deems; Justin M. Pflug; Jessica D. Lundquist; Tobias Jonas (2019). Revisiting Snow Cover Variability and Canopy Structure Within Forest Stands: Insights From Airborne Lidar Data. Water Resources Research, 55, 6198– 6216, [doi: 10.1029/2019WR024898](https://doi.org/10.1029/2019WR024898)._

airborne-laser-scanning

display_name: airborne-laser-scanning

canopy-height

display_name: canopy-height

forest-structure

display_name: forest-structure

snow-depth

display_name: snow-depth

snow-distribution

display_name: snow-distribution

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: ALS-based snow depth and canopy height maps from flights in 2017 (Grisons, CH and Grand Mesa, CO)


maintainer: Athanasios Nenes

en: cloud-droplets sigma-w wolfgangpass cloud-modeling supersaturation raclets

en: Predicted cloud droplet numbers (kappa=0.25) Weissfluhjoch

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Davos Wolfgang station between February 24 and March 8 2019. For this, as a sensitivity test, a hygroscopicity parameter of 0.25 is assumed, which is the upper limit determined from the analysis carried out for Weissfluhjoch (https://www.envidat.ch/dataset/ccn-hygroscopicity-predicted-cloud-droplet-numbers-weissfluhjoch). The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Predicted cloud droplet numbers (kappa=0.1) Davos Wolfgang

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Davos Wolfgang station between February 24 and March 8 2019. For this, as a sensitivity test, a hygroscopicity parameter of 0.1 is assumed, which is the lower limit determined from the analysis carried out for Weissfluhjoch (https://www.envidat.ch/dataset/ccn-hygroscopicity-predicted-cloud-droplet-numbers-weissfluhjoch). The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Cloud droplet properties were predicted between February 24 and March 8 2019 for the measurement site Davos Wolfgang (1630 m a.s.l., LON: 9.853594, LAT: 46.835577). Droplet calculations are carried out with the physically based aerosol activation parameterization of Morales and Nenes (2014), employing the “characteristic velocity” approach of Morales and Nenes (2010). Aerosol size distribution observations required to predict the cloud droplet numbers and maximum in-cloud supersaturation are obtained from a Scanning Mobility Particle Size Spectrometer (SMPS) instrument deployed at Davos Wolfgang (https://www.envidat.ch/dataset/aerosol-data-davos-wolfgang). The required vertical velocity measurements are derived from the wind Doppler Lidar (https://www.envidat.ch/dataset/lidar-wind-profiler-data) deployed at the same station and are extracted from the first bin of the instrument, being 200 m above ground level. The hygroscopic properties of the particles measured at Davos Wolfgang could not be estimated, owing to a lack of concurrent CCN measurements. As a sensitivity test, droplet calculations are performed assuming two different values of the aerosol hygroscopicity parameter, 0.1 and 0.25, based on the analysis carried out for Weissfluhjoch. Additional information can be found in Section 2.3 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

cloud-droplets

display_name: cloud-droplets

cloud-modeling

display_name: cloud-modeling

raclets

display_name: raclets

sigma-w

display_name: sigma-w

supersaturation

display_name: supersaturation

wolfgangpass

display_name: wolfgangpass

en: Predicted cloud droplet numbers Davos Wolfgang


en: ground-temperature borehole permos ritigraben permafrost

en: DATA ACCESS

media_type: URL

en: PERMOS DATA POLICY

media_type: PDF

en: Map of PERMOS borehole network

en:
_ENVIDAT NOTE: Data currently unvailable and measures are being taken to recover and restore the data files._

Processed ground temperature measurements at the Ritigraben permafrost borehole (RIT_0102) in canton Valais, Switzerland. The borehole is located at 2690 m asl on a flat site. The surface material is coarse blocks and borehole depth is 30 m. Thermistors used YSI 44006. Year of drilling 2002. This borehole is part of the Swiss Permafrost network, PERMOS (www.permos.ch). Contact phillips@slf.ch for details of processing applied.

borehole

display_name: borehole

ground-temperature

display_name: ground-temperature

permafrost

display_name: permafrost

permos

display_name: permos

ritigraben

display_name: ritigraben

en: RIT1: Processed permafrost borehole data (2690  m asl), Ritigraben, Switzerland


en: adults-and-teenagers online-questionnaire-survey visual-attractiveness nfi-photos perception-of-ecosystem-services

en: Questionnaire Italian

media_type: .pdf

en: Questionnaire German

en: SPSS-Dataset

en: Questionnaire French

en: Dataset in csv-format

en: Codebook to SPSS-file

en: This questionnaire survey was conducted as an online survey and aimed at investigating the relationship between physical forest characteristics, visual attractiveness of forest and the perception of ecological and cultural ecosystem services in urban forests. Each participant was shown 6 photos out of a pool of 50 photos taken from the Swiss National Forest Inventory (NFI) database. Physical forest characteristics were derived from the photos. The study was conducted as part of the "WaMos meets LFI" (WML) project.

adults-and-teenagers

display_name: adults-and-teenagers

nfi-photos

display_name: nfi-photos

online-questionnaire-survey

display_name: online-questionnaire-survey

perception-of-ecosystem-services

display_name: perception-of-ecosystem-services

visual-attractiveness

display_name: visual-attractiveness

education

en: Education and science

en: Relationship between physical forest characteristics, visual attractiveness and perception of ecosystem services in urban forests


en: built-up-classification forest-persistence urban-sprawl spatial-modelling land-use-and-cover-change basic-services planning-outcome urban-compactness forest-gain nature-conservation topography urban-morphology

en: Descricao dos dados em portiuguês

en: Portugues description

media_type: .shp

en: Master plan Ubatuba (zones)

en: Variables description

en: Table of content. Variables description, source, and other important information

en: infill

media_type: geotiff

en: New built-up pixels classified as infill

format: GeoTIFF

en: Native forest cover persistence from 2005 to 2015

en: Axial

en: New built-up pixels classified as axial

en:
Basic education in % per census sector (change per
year)

media_type: SHP

en: Ecological-Economic Zoning (EEZ)

format: SHP

en: Increase in waste collection service

en: Urban persistence: Built-up 2005 = Built-up 2015

en: Topographic Index Position (TPI)

en: Human Development Index (HDI) per municipality (change per year)

en: Master plan Ihabela (zones)

en: isolated

en: New built-up pixels classified as isolated

en: Population density per pixel (change per year)

en: Increase in Normalized Difference Vegetation Index

en: Native forest cover gains from 2005 to 2015

en: slope

en: Slope °

en: Increase in sanitation service

en: Mean income in Reais (R$) per census sector (change per year)

en: Permanent housing density increase

en: Increase in clean water provision service

en:
The present dataset is part of the published scientific paper entitled “The role of spatial planning in land change: An assessment of urban planning and nature conservation efficiency at the southeastern coast of Brazil” (Pierri Daunt, Inostroza and Hersperger, 2021). In this work, we evaluated the conformance of stated spatial planning goals and the outcomes in terms of urban compactness, basic services and housing provision, and nature conservation for different land-use strategies. We evaluate the 2005 Ecological-Economic Zoning (EEZ) and two municipal master plans from 2006 in a coastal region in São Paulo State, Brazil. We used Partial Least Squares Path Modelling (PLS-PM) to explain the relationship between the plan strategies and land-use change ten years after implementation in terms of urban compactness, basic services and housing increase, and nature conservation.

We acquired the data for the explanatory variables from different sources listed on Table 1. Since the model is spatially explicit, all input data were transformed to a 30 m resolution raster. Regarding the evaluated spatial plans, we acquired the zones limits from the São Paulo State Environmental Planning Division (CPLA-SP), Ilhabela and Ubatuba municipality.

1)	Land use and cover data: Urban persistence, Urban axial, Urban infill, Urban Isolates, Forest cover persistence, Forest cover gain, NDVI increase

We acquired two Landsat Collection 1 Higher-Level Surface Reflectance images distributed by the U.S. Geological Survey (USGS), covering the entire study area (paths 76 and 77, row 220, WRS-2 reference system, https://earthexplorer.usgs.gov/). We classified one image acquired by the Landsat 5 Thematic Mapper (TM) sensor on 2005-05-150, and one image from the Landsat 8 Operational Land Imager (OLI) sensor from 2015-08-15. We collected 100 samples for forest cover, 100 samples for built-up cover and 100 samples for other classes. We then classified these three classes of land cover at each image date using the Support Vector Machine (SVM) supervised algorithm (Hsu et al., 2003), using ENVI 5.0 software.

Land-use and land-cover changes from 2005 to 2015 were quantified using map algebra, by mathematically adding them together in pairs (10*LULC2015 + LULC2005). We reclassified the LULC data into forest gain (conversion of any 2005 LULC to forest cover in 2015); forest persistence (2005 forested pixels that remained forested in 2015); new built-up area (conversion of any 2005 LULC to built-up in 2015); and urban maintenance (2005 built-up pixels that remained built-up in 2015).

To describe the spatial configuration of the urban expansion, we classified the new built-up areas into axial, infill and isolated, following Inostroza et al. (2013) (For details, please refer to Supplementary Material I at the original publication).

The NDVI was obtained from the same source used for the LULC data. With the Google Engine platform, we used an annual average for the best pixels (without clouds) for 2005 and 2015, and we calculated the changes between dates. We used increases of > 0.2 NDVI to represent an improvement in forest quality.

2)	Federal Census data organization: Urban Basic Services and Housing indicator, socioeconomic and population:

The data used to infer the values of basic services provision, socioeconomic and population drivers was derived from the Brazilian National Census data (IBGE, 2000 and 2010). Population density, permanent housing unit density, mean income, basic education, and the percentage of houses receiving waste collection, sanitation and water provision services, called basic services in the context of this study, were calculated per 30 m pixel. The Human Development Index is only available at the municipality level. We attributed the HDI for the vector file with the municipality border, and we rasterized (30 m resolution) this file in QGIS. Annual rates of change were then calculated to allow comparability between LULC periods. To infer the BSH, we used only areas with an increase in permanent housing density and basic services provision (See Supplementary Material I at the original publication).

3)	Topographic drivers

To infer the values of the topographic driver, we used the slope data and the Topographic Index Position (TPI) based on the digital elevation model from SRTM (30 m resolution) produced by ALOS (freely available at eorc.jaxa.jp/ALOS/en/about/about_index.htm), and both variables were considered constant from 2005 to 2015 (See Supplementary Material I at the original publication).

basic-services

display_name: basic-services

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Spatially explicit data to evaluate spatial planning outcomes in a coastal region in São Paulo State, Brazil


maintainer: Varun Sharma

en: alps snow-atmosphere-interaction antarctica mesoscale-modelling blowing-snow

media_type: ZIP

en: REPRODUCIBILITY_SIMULATION.zip contains all the extraneous files required to perform the simulations in associated manuscript (see Citations 3 in README.txt). The purpose of sharing these files apart from purposes of reproducibility is to also serve as templates for users to learn the workflow of CRYOWRF and perform simulations for their own purposes.

en:
REPRODUCIBILITY_POSTPROCESSING.zip contains data and scripts used to produce all figures from for the associated manuscript submitted for peer review ( see section on Citations below )

The folders stand for the three case studies presented in the manuscript. Two case studies (case Ia and case Ib) are on simulations in Antarctica and one case study
case II is for simulations in the Alps.

The associated data in the form of netcdf files or text files were produced using CRYOWRF v1.0

Apart from reproducibility, the intention of sharing these scripts is also to make it easy for new users to adopt CRYOWRF and be efficient, in particular in processing snowpack outputs.

The scripts were tested on multiple machines (different OSes) with the attached YAML file (wrf_analysis.yml) to setup the conda environment. All scripts were run using spyder as the IDE.

en:
This repository contains data required for reproducibility of the results to be published in the associated manuscript.

Apart from reproducibility, the attached datasets also serve as templates for new users to adopt CRYOWRF in their research.

The datasets consist of two folders organized in zip format:

1. REPRODUCIBILITY_SIMULATION:
  Consists of namelists for WPS, WRF and SNOWPACK to reproduce simulations published in the manuscript
  Additional files include datasets (from IMAU-FDM / RACMO, see "credits" below ) as well as helper python scripts to
  produce *.sno files
  which are used as initial conditions for SNOWPACK in CRYOWRF.

2. REPRODUCIBILITY_POSTPROCESSING:
   Includes outputs of CRYOWRF and python scripts used to prepare figures in the manuscript.

Each of the folders have their own readme files for more details.

 Code
citation: Varun Sharma. (2021, July 2). vsharma-next/CRYOWRF: CRYOWRF v1.0 (Version v1.0). Zenodo. http://doi.org/10.5281/zenodo.5060165

location: https://gitlabext.wsl.ch/atmospheric-models/CRYOWRF   (stable releases / institutional repo)
        https://github.com/vsharma-next/CRYOWRF            (dev branches / developer repo)

 Publication
**Introducing CRYOWRF v1.0: Multiscale atmospheric flow simulations with advanced snow cover modelling.**
Varun Sharma, Fraziska Gerber and Michael Lehning, Submitted to Geoscientific Model Development

 Acknowledgements
We thank Peter Kuipers Munneke (P.KuipersMunneke@uu.nl) for preparing and sharing outputs of IMAU-FDM and RACMO used for initial conditions for case Ia. The relevant citations for the methods through which these datasets were generated are:

* Kuipers Munneke, P., S. R. M. Ligtenberg, B. P. Y. Noël, I. M. Howat, J. E. Box, E. Mosley-Thompson, J. R. McConnell, K. Steffen, J. T. Harper, S. B. Das and M. R. van den Broeke. 2015. Elevation change of the Greenland ice sheet due to surface mass balance and firn processes, 1960-2014. The Cryosphere, 9, 2009-2025. doi:10.5194/tc-9-2009-2015

 * Ligtenberg, S. R. M., P. Kuipers Munneke, B. P. Y. Noël, and M. R. van den Broeke. 2018. Brief communication: Improved simulation of the present-day Greenland firn layer (1960-2016). The Cryosphere, 12, doi:10.5194/tc-12-1643-2018

alps

display_name: alps

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

mesoscale-modelling

display_name: mesoscale-modelling

snow-atmosphere-interaction

display_name: snow-atmosphere-interaction

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Reproducibility Dataset for CRYOWRF v1.0


en: outgoing incoming davos longwave-radiation shortwave-radiation

en: Processing doc

en: DATA ACCESS

en: Metadata

en: Parameter file

en:
Incoming and outgoing shortwave and longwave 2 min radiation measurements in Davos Dorf, CH.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

davos

display_name: davos

incoming

display_name: incoming

longwave-radiation

display_name: longwave-radiation

outgoing

display_name: outgoing

shortwave-radiation

display_name: shortwave-radiation

en: ASRB_DAV: Shortwave and longwave radiation measurements (2 min) in Davos Dorf


weissfluhjoch-dataset-for-esm-snowmip

maintainer: Nander Wever

title_for_slug: weissfluhjoch-dataset-for-esm-snowmip

en: esm-snowmip snow-depth snow-models snow weissfluhjoch

en: Dataset Weissfluhjoch for ESM-SnowMIP

en: ini file

en: This ini file is required by data-converter from MeteoIO version 1887 (http://models.slf.ch/p/meteoio/)

en: Conversion script

media_type: text/x-sh

en:
Use this script to convert WFJ_optimaldataset_v6.smet to wfj.smet, the file that is used for the ESM-SnowMIP project. It also requires the file: WFJ_AirPressure_Data.zip

Use: bash create_wfj_dataset.sh > input/wfj.smet

mimetype: text/x-sh

en: This Weissfluhjoch dataset is a processed version of the Weissfluhjoch dataset version 6 from https://doi.org/10.16904/6. This dataset was specially created for the ESM-SnowMIP project. Here it is documented how this dataset has been created.

esm-snowmip

display_name: esm-snowmip

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-models

display_name: snow-models

weissfluhjoch

display_name: weissfluhjoch

en: Weissfluhjoch dataset for ESM-SnowMIP


en: humidity wind-speed shortwave-radiation snow-ice-temperature longwave-radiation precipitation-amount wind-direction snow-depth air-temperature

en: Version 4

en:
Deprecated version. Release notes:

Update: dataset extended to 2016-09-02T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: Version 6

en:
Deprecated version.

Release notes:

- Missing ISWR for 2009-09-30 and 2010-04-30 has been replaced by data from WFJ Gipfel

This dataset is the basis for the Weissfluhjoch dataset in ESM-SnowMIP (doi: http://dx.doi.org/10.16904/16).

en: Version 1

en:
Deprecated version. Release notes:

First release of dataset.

en: SNOWPACK ini file (old syntax)

en: This ini-file can be used to run SNOWPACK simulations with the WFJ data set, using version 3.4.0 or higher.

en: Version 5

en:
Deprecated version. Release notes:

Update: using the incoming and outgoing short- and longwave radiation data from the new processing chain from 2010 onwards, filling also data gaps in pre-2010 data.

Update: dataset extended to 2016-10-04T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: Undercatch correction

en: This document describes how the undercatch correction for the Weissfluhjoch measurement site was determined.

en: Version 2

en:
Deprecated version. Release notes:

Bug fix: in v1, incoming radiation components were taken from WFJ_Gipfel station, instead of WFJ Versuchsfeld.

en: SNOWPACK ini file (new syntax)

en: This ini-file can be used to run SNOWPACK simulations with the WFJ data set, using the new MeteoIO Filter, Generator and Interpolation syntax.

en: SNOWPACK sno file

en: This sno-file can be used to run SNOWPACK simulations with the WFJ data set, using version 3.4.0 or higher.

en: Version 7 (current)

en:
Release notes:

Bug fix: in previous versions, snow lysimeter data from September 2010 onwards was erroneously reported for UTC+2, instead of UTC+1 (i.e., reported one hour later than should have been).

Update: dataset extended to 2017-07-11T00:30.

en: All versions

en: Version 3

en:
Deprecated version. Release notes:

Bug fix: in version 2, the undercatch correction was not applied correctly

Bug fix: in version 2, snow lysimeter data was missing for extended periods of time

Update: dataset extended to 2016-01-02T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en:
Dataset of meteorological and snowpack measurements from the automatic weather station at Weissfluhjoch, Davos, Switzerland, suitable for driving snowpack models. The dataset contains standard meteorological measurements, and additionally snowpack runoff data from a snow lysimeter. Where possible, data is quality checked and missing data are replaced from backup sensors from the measurement site itself, or (in only a few cases) from the MeteoSwiss weather station at 470 m distance and 150 m above the measurement site.

Publication
Wever, N., Schmid, L., Heilig, A., Eisen, O., Fierz, C., and Lehning, M. Verification of the multi-layer SNOWPACK model with different water transport schemes. 2015. The Cryosphere. Volume 9. 2271-2293. http://dx.doi.org/10.5194/tc-9-2271-2015.

air-temperature

display_name: air-temperature

humidity

display_name: humidity

precipitation-amount

display_name: precipitation-amount

snow-ice-temperature

display_name: snow-ice-temperature

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: WFJ_MOD: Meteorological and snowpack measurements from Weissfluhjoch, Davos, Switzerland


maintainer: Thorsten Bartels-Rausch

en: ozone heterogeneous brine snow laboratory-study metamorphism arctic alpine reaction interface antarctica chemistry solution

en: data list

media_type: dat

en: Lists file names, snow sample properties, and flow settings for each data-set.

en: Ozone data

en: Trend of ozone mixing ratio ( _O3mixingRatio_ppb_ with time ( _time_s_ ) as measured downstream of the snow sample during the experiments. Time "0" denotes the time when data acquisition with ozone analyser was started. And, ozone (_nOzone_molec_per_s_ ) loss for each experiment with duration of ozone exposure ( _duration_s_ ) of ozone exposure, as derived from the ozone trends shown above. Time "0" denotes the time when the carrier gas with ozone was passed via the snow sample.

en: Acetone data

en:
intensity of the acetone-water-cluster and water-cluster (as derived by a chemical ionisation mass spectrometer) with time in the carrier gas downstream of packed bed flow tube holding the snow sample or the by-pass, respectively. Time "0" denotes the time when the mass spectrometer data acquisition was started. When the carrier
gas with acetone was passed via the packed bed flow tube, that is switched from by-pass to pass the snow, acetone concentration in the carrier gas rapidly dropped due to surface adsorption and slowly recovered as the adsorption sites saturate. From this, the surface area can be obtained.

en: Matlab Data

media_type: mat

en: All data as Matlab mat file

en: Data Figure 1

en: Data of published Figure

en: Matlab Script to view and plot data

media_type: .m

en: Readme file

en: This file shows data, code, and plots.

en: Earth’s snow cover is very dynamic on diurnal time scales. The changes to the snow structure during this metamorphism have wide ranging impacts such as on avalanche formation and on the capacity of surface snow to exchange trace gases with the atmosphere. Here, we investigate the influence of dry metamorphism, which involves fluxes of water vapor, on the chemical reactivity of bromide in the snow. For this, the heterogeneous reactive loss of ozone at a concentration of 5-6E12 molecules cm-3 is investigated in artificial, shock-frozen snow samples doped with 6.2 uM sodium bromide and with varying metamorphism history. The oxidation of bromide in snow is one reaction initiating polar bromine releases and ozone depletions.

alpine

display_name: alpine

antarctica

display_name: antarctica

arctic

display_name: arctic

brine

display_name: brine

chemistry

display_name: chemistry

heterogeneous

display_name: heterogeneous

interface

display_name: interface

laboratory-study

display_name: laboratory-study

metamorphism

display_name: metamorphism

ozone

display_name: ozone

reaction

display_name: reaction

solution

display_name: solution

en: Data set on bromide oxidation by ozone in snow during metamorphism from laboratory study