en: erosion model mars snow sediment-transport

en: Datasets of Figure 2

en: Datasets of Figure 4a

en: Datasets of Figure 3b

en: Datasets of Figure 3a

en: Datasets of Figure 4b

en:
The files contain the datasets used to produce Figures 2, 3, and 4 of the manuscript ([doi: 10.1002/2016GL071822](http://dx.doi.org/10.1002/2016GL071822)).

 Manuscript Abstract:
Despite being the main sediment entrainment mechanism in aeolian transport, granular splash is still poorly understood. We provide a deeper insight into the dynamics of sand and snow ejection with a stochastic model derived from the energy and momentum conservation laws. Our analysis highlights that the ejection regime of uniform sand is inherently different from that of heterogeneous sand. Moreover, we show that cohesive snow presents a mixed ejection regime, statistically controlled either by energy or momentum conservation depending on the impact velocity. The proposed formulation can provide a solid base for granular splash simulations in saltation models, leading to more reliable assessments of aeolian transport on Earth and Mars.

erosion

display_name: erosion

mars

display_name: mars

model

display_name: model

sediment-transport

display_name: sediment-transport

snow

display_name: snow

education

en: Education and science

en: Energy- and momentum-conserving model of splash entrainment in sand and snow saltation


maintainer: EnviDat Support

en: acoustic-emissions sintering viscous-deformation snow-avalanche snow-mechanics snow fiber-bundle-model snow-failure

state: active

type: dataset

en: fiber-bundle-model-for-snow-failure

media_type: application/zip

en: Data underlying Figures in publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted to "Geophysical Research Letters"

format: ZIP

mimetype: application/zip

en:
This dataset contains modeled and experimental results for laboratory snow failure experiments and the concurrent acoustic emissions signatures for different loading rates. For modelling the snow failure we used a fiber bundle model that includes sintering and viscous deformation.

The data underlay the figures in the publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted for publication to "Geophysical Research Letters".

acoustic-emissions

display_name: acoustic-emissions

fiber-bundle-model

display_name: fiber-bundle-model

sintering

display_name: sintering

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-mechanics

display_name: snow-mechanics

viscous-deformation

display_name: viscous-deformation

fr: Education, science

de: Bildung, Wissenschaft

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Fiber Bundle Model for snow failure and concurrent Acoustic Emissions


maintainer: Matthias Haeni

en: swiss-forest-lab precipitation meteorology meteo par long-term temperature relative-humidity climate-change wind-speed

en: Site aerial photo (Beatenberg)

media_type: image/jpeg

en: Site aerial photo from both Beatenberg stations. Source: Google. 2016. Site aerial photo from both Beatenberg stations. Retrieved November 11, 2016, from https://www.google.ch/maps

format: SERVICE

mimetype: image/jpeg

en: Site photo of the forest station (BAB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Site photo of the field station (BAF)

en: Site photo of the field station from below (viewing upwards the slope).

en: Data plot of the field station (BAF)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

format: PDF

mimetype: application/pdf

en: Field station data (BAF)

media_type: text/csv

en: Data file.

format: CSV

mimetype: text/csv

en: Forest station data (BAB)

en: Data plot of the forest station (BAB)

en:
High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Beatenberg in Switzerland where one station is located within a natural coniferous forest (BAB) with Norway spruce (_Picea abies_; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Beatenberg is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the
Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Beatenberg, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: geochemical-solutes precipitation spatially-distributed-sampling stable-water-isotopes stream-water

format: XLS

en: The dataset contains daily measurements of volumes, isotopes and solutes of stream water as well as precipitation measured several locations; meteorological variables are added. Date: 18.07.2019

en:
This dataset contain measurements of solute and stable water isotopes in stream water and precipitation in the Alp catchment and two of its tributaries (between 2015 -2018) . The river Alp is a snow-dominated catchment situated in Central Switzerland characterized by an elevation range from 840 to 1898 m a.s.l. The dataset provides solutes (major anions and cations, trace metals) and stable water isotopes and water fluxes (precipitation rates, discharge) at daily intervals from several sampling locations.
An updated version of the isotope dataset is available here: https://www.doi.org/10.16904/envidat.242

geochemical-solutes

display_name: geochemical-solutes

spatially-distributed-sampling

display_name: spatially-distributed-sampling

stable-water-isotopes

display_name: stable-water-isotopes

stream-water

display_name: stream-water

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Daily data of solute and stable water isotopes in stream water and precipitation in the Alp catchment, Central Switzerland


dischmex-meteorological-measurements

maintainer: Rebecca Mott

title_for_slug: dischmex-meteorological-measurements

en: meteo-station dischma meteorological-measurements meteorological-data dischmex

en: Meteorological measurements 2016

en: Location of the meteorological stations

en: Meteorological measurement 2014

en: data

en: Meteorological measurement 2015

en: Overview sensors

en: Meteorological measurements 2014

en:
Meteorological measurements recorded in the Dischma valley from 2014-2016. In 2014 and 2015 we used 11 mobile weather stations from sensorscope to record meteorological parameter in the upper Dischma valley in the closer surroundings of the Gletschboden area. The meteorological stations are eqiupped with at least air temperature/humidity, wind velocity and wind direction sensors. Some stations are additionally equipped with precipitation, shortwave radiation and snow surface temperature sensors.
Three transects were installed at different aspects and were equipped with air temperature/humidity and wind sensors. Transect 1 (stations 2-4) provides meteorological Information on an east-north-east facing slope at elevations ranging between 2100 m and 2500 m. Transect 2 (stations 5-7) provides meteorological Information on a south-west slope and transect 3 (stations 8-10) on a north-west slope. Station 1 is fully equipped with meteorological sensors (temperature/humidity, wind, IR, up and downwand shortwave radiation and precipitation).
In 2016, mobile stations from sensorscope were replaced with six permanent meteorological stations. Meteorological stations 1-3 are equipped with an air temperature/humidity sensor, two wind speed sensors, a wind direction sensor and an incoming and outgoing shortwave radiation sensor. Stations 4 and 6 are equipped with an air temperature/humidity sensor and a wind speed/direction sensor. Station 5 is a equipped with an air temperature/humidity sensor, a wind speed/direction sensor, a snow surface temperature sensor, an incoming and outgoing shortwave radiation sensor and an incoming longwave radiation sensor.

dischma

display_name: dischma

dischmex

display_name: dischmex

meteo-station

display_name: meteo-station

meteorological-data

display_name: meteorological-data

meteorological-measurements

display_name: meteorological-measurements

en: DISCHMEX - Meteorological measurements


en: topography cryowrf antarctica landuse wrf

en: Scripts

en: Scripts to run the preprocessing to produce WRF binary tiles from REMA and AntarcticaLC2000 for topography and landuse (see Documentation for procedure).

en: WPSinput

en: Input files to run the Weather Research and Forecasting model (WRF) preprocessing system WPS with REMA topography and AntarcticaLC2000 landuse data (see Documentation for details).

en: Documentation

en: Documentation about how the provided dataset was produced including details to reproduce the dataset.

en:
Reference Elevation Model of Antarctica (REMA) topography and AntarcticaLC2000 landuse data
are now available as static data input for the Weather Research and Forecasting model (WRF). Topography
and landuse are made available at a spatial resolution of 1 km. This documentation describes the methods
applied to convert REMA and AntarcticaLC2000 to WRF readable format and shows how this improves
the representation of the Antarctic topography and landuse categories over coastal Antarctic regions.

antarctica

display_name: antarctica

cryowrf

display_name: cryowrf

landuse

display_name: landuse

topography

display_name: topography

wrf

display_name: wrf

en: REMA topography and AntarcticaLC2000 for WRF


maintainer: M. Carol Resch

en: vegetation grassland diversity nematodes topsoil-removal long-term-experiment restoration

en: Nematode colonizer-persister classes

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

CP1.a: C-P (colonizer-persister) class 1 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to enrichment indicators according to Ferris, Bongers, & de Goede 2001
CP2.a: C-P (colonizer-persister) class 2 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to stress indicators according to Ferris, Bongers, & de Goede 2001
CP3.a: C-P (colonizer-persister) class 3 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990
CP4.a: C-P (colonizer-persister) class 4 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990
CP5.a: C-P (colonizer-persister) class 5 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

en: Nemadotes and vegetation

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

X: X-Coordinate

Y: Y-Coordinate

Ri.veg: Total number of plant species

Div.veg: Shannon diversity of plant species

Ri.nem: Total number of nematode families

Div.nem: Shannon diversity of nematode families

abund: Total nematode abundance (individuals per 100g dry soil)

MI: Maturity index according to Bongers 1990; calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

PPI: Plant parasite index according to Bongers 1990; calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

PPI.MI: Plant parasite to Maturity index according to Bongers, van der Meulen, & Korthals 1997; calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

CI: Channel index according to Ferris, Bongers, & de Goede 2001 (%); calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

EI: Enrichment index according to Ferris, Bongers, & de Goede 2001 (%); calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

SI: Structure index according to Ferris, Bongers, & de Goede 2001 (%); calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

He.a: Herbivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

He.ecto.a: Herbivorous ectoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

He.endo.a: Herbivorous endoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ba.a: Bacterivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Fu.a: Fungivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Om.a: Omnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ca.a: Carnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Om.Ca.a	Sum of omnivorous and carnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014
CP1.a: C-P (colonizer-persister) class 1 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to enrichment indicators according to Ferris, Bongers, & de Goede 2001

CP2.a: C-P (colonizer-persister) class 2 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to stress indicators according to Ferris, Bongers, & de Goede 2001

CP3.a: C-P (colonizer-persister) class 3 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

CP4.a: C-P (colonizer-persister) class 4 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

CP5.a: C-P (colonizer-persister) class 5 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

CP3-5.a: Sum of C-P3, C-P4 and C-P5 nematode abundance (individuals per 100g dry soil) equivalent to structure indicators according to Ferris, Bongers, & de Goede 2001

protect.sp.pro: plant species categorized into species of concern based on their red list status in Switzerland as well as their protection status in Switzerland and the Canton Zurich (Moser, Gygax, Bäumler, Wyler, & Palese, 2002)

tar.sp: Number of target species (all species recorded in the eleven target plots plus propagules of species applied by hand, resulting in a total of 143 species)

Indi.moist: Plant indicator values for soil moisture according to Landolt et al. 2010

Indi.nutri: Plant indicator values for soil nutrients according to Landolt et al. 2010

Management: level of mowing and manuring frequency (35-40 kg N ha-1 application-1); intensity1 = mowing once and no manure; intensity2 = 2-3 times mowing and no manure; intensity3 = 2-3 times mowing and manuring; intensity4 = 4-5 times mowing and manuring

Tillage: last time of tillage

Land.use.history: for Initial plots = recent agricultural use; for all restored sites = agricultural use before restoration
Mowing	earliest date of biomass harvesting (excluding “Initial”) based on contracts between farmers and the Nature Protection Agency of Zurich

Soil.type: based on soil mapping survey 1991 (before restoration)

Soil.texture: determined by the sediment method (Gee & Bauder 1986) and classified into soil textural classes according to FAO (1990)

pH: soil pH (CaCl2)

Slope: slope gradient classes according to FAO (1990; %)

en: Nematode families

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

column 3-41: Nematode abundance (individuals per 100g dry soil) per family; nomenclature according to Bongers 1988

en: Plant community composition (plant species)

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

column 3-252: Plant abundance per species (in total 252 plant species) expressed as cover percentage estimation according to van der Maarel (vdM 1979; 7 classes: 1-7); nomenclature according to Lauber & Wagner (1996)

en: Coordinates of one research plot were wrong. This was corrected in the current version of the file.

en: Nematode feeding types

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

He.ecto.a: Herbivorous ectoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

He.endo.a: Herbivorous endoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ba.a: Bacterivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Fu.a: Fungivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Om.a: Omnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ca.a: Carnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:
 > Resch, M.C., Schütz, M., Graf, U., Wagenaar, R., van der Putten, W.H., Risch, A.C. 2019. Does topsoil removal in grassland restoration benefit both soil nematode and plant communities? Journal of Applied Ecology 56: 1782-1793.

Please cite this paper together with the citation for the datafile.

 Methods
 Study area and experimental settings
The study was conducted in a nature reserve (Eigental: 47° 27’ to 47° 29’ N, 8° 37’ E, 461 to 507 m a.s.l.) that is located on the Swiss Central plateau close to Zurich airport (Canton Zurich, Switzerland). The mean annual temperature in this area ranges from 8.9 to 10.6 °C, mean annual precipitation from 910 to 1260 mm [10-year average (2007-2017); MeteoSchweiz, 2018]. The main soil types are calcaric to gleyic Cambisol and Gleysols. The reserve was established in 1967 to protect small remnants of oligotrophic semi-natural grasslands (roughly 12 ha). The plant community can be characterized as Molinion and Mesobromion (semi-wet to semi-dry), depending on the site-specific groundwater level and slope inclination (Delarze, Gonseth, Eggenberg, & Vust, 2015). These remnants represent species-rich islands in an otherwise intensively managed agricultural landscape. Semi-natural grasslands covered an area of 60,000 ha in the Canton Zurich in 1939, however, by 2005 only roughly 600 ha remained (Baudirektion Kanton Zürich, 2007). In 1990, the government of Canton Zurich decided to enlarge the nature reserve Eigental. The goal was to incorporate eleven patches of 20 ha adjacent intensively farmed land and transform these patches into semi-natural grasslands. The patches had a different agricultural history, ranging from permanent (no tillage for >50 years) to temporary grassland (as part of crop rotation; last tillage <5 years). On all freshly integrated patches fertilization was stopped in 1992 and from then on biomass was harvested three times a year and removed. After 5 years without noticeable effects on vegetation composition, the Nature Conservation Agency of Canton Zurich decided to increase the restoration efforts. In 1995, a large-scale experiment was initialized to evaluate if certain treatments can facilitate restoration within a reasonable timeframe of 5 to 10 years after treatment implementation.
The three restoration treatments used were:
i. “Harvest only”: Plots are being mowed two to three times a year and the biomass is removed.
ii. “Topsoil”: Topsoil was removed to a depth of 10 to 20 cm, depending on the depth of the O and A horizon, in four randomly selected areas within each of the eleven patches in late autumn 1995. The size of each topsoil removal area depended on individual patch size and was between 2700 and 7000 m2.
iii. “Topsoil+Propagules”: Propagules from target vegetation were added on half of the area where topsoil was removed, using fresh, seed-containing hay originating from a mixture of semi-dry to semi-wet species-rich grasslands of local provenance (within a radius of 7 km). Hay applications were conducted twice in 1995 and 1996. Repeated applications were chosen to account for the low quantity of available plant material per transfer, since area ratio between receptor and donor sites was roughly 1:1. In addition, hand-collected propagules from 15 selected target species of regional provenance (within a radius of 30 km) were equally applied in 1996 and 1997.
“Topsoil” and “Topsoil+Propagules” plots are mowed once a year, and the biomass is removed. Mowing on these plots started five years after the treatment was implemented.
Eleven permanent plots of 5 m x 5 m were randomly established in each treatment to monitor the vegetation development. The experiment was complemented with 11 control plots that represent the initial state of intensively managed grasslands, further referred to as “Initial”, and 11 control plots that represent the targeted state of donor sites for “Topsoil+Propagules”, further referred to as “Target”. Consequently, the experiment consists of 55 plots (5 treatments x 11 replicates). Management of intensively used grasslands includes mowing and fertilizing (manure) between two to five times a year, as well as different tillage regimes (no tillage for >50 years; last time of tillage <5 years).

 Nematode and plant sampling
Soil nematodes were sampled in 2 m x 2 m plots, randomly established at least 2 m away from the vegetation plots. We collected eight soil cores with a 2.2 cm diameter soil core sampler (Giddings Machine Company, Windsor, CO, USA) to a depth of 12 cm (representing the majority of the plant rooting system) in each plot at the beginning of July 2017. The eight cores within each replicate plot were combined, gently homogenized, placed in coolers and transported to the laboratory of NIOO in Wageningen, the Netherlands, within one week. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriator (Oostenbrink, 1960) and concentrated, resulting in 6 mL nematode solution. The nematode solution was subdivided into three subsamples, two for morphological identification and quantification, and one for molecular work (not used in this study). For morphological identification and quantification, nematodes were heat-killed at 90 °C and fixed in 4 % formaldehyde solution (final volume 10 mL per subsample). All nematodes in 1 mL of formaldehyde solution were counted, and a minimum of 150 individuals per 1 mL sample (or all if less nematodes were present) were identified to family level using Bongers (1988). We then extrapolated the numbers of each nematode taxa identified to the entire sample and expressed them per 100 g dry soil for further analyses.
We calculated number of nematode taxa and Shannon diversity and assessed nematode community composition. In addition, we classified the nematode taxa into feeding types (herbivores, bacterivores, fungivores, omni-carnivores), structural and functional guilds (Table S4). Structural guilds assign nematode taxa according to life-history traits into five colonizer-persister (C-P) classes, ranging from one (early colonizers of new resources) to five (persisters in undisturbed habitats; Bongers 1990). C-P classes can be categorized as indicators for nutrient-enriched (C-P1), stressed (C-P2) and structured (C-P3 + C-P4 + C-P5) soil conditions (Ferris, Bongers, & de Goede, 2001). Functional guilds assign nematode taxa according to their C-P classification combined with their feeding habits (Ferris, Bongers, & de Goede, 2001). Based on the structural and functional guild classification we calculated five additional indices to assess soil nutrient status, disturbance and food web characteristics using NINJA (Sieriebriennikov, Ferris, & de Goede, 2014). 1) The Maturity index indicates the degree of different environmental perturbations (e.g., tillage, nutrient enrichment, pollution) and is used to monitor colonization and subsequent succession after disturbances (Bongers, 1990). 2) The ratio between the Plant Parasite (C-P of herbivorous nematodes only) to Maturity index is used to monitor the recovery of disturbed habitats incorporating information of life-history traits for all feeding types (Bongers, van der Meulen, & Korthals, 1997). 3) The Enrichment index indicates nutrient-enriched soils and agricultural management practices (Ferris, Bongers, & de Goede, 2001). 4) The Structure index provides information about the succession stage of the soil food web and therefore correlates with the degree of maturity of an ecosystem (Ferris, Bongers, & de Goede, 2001). 5) The Channel index provides information about the predominant decomposition pathways, where higher values stand for a higher proportion of energy transformed through the slow fungal decomposition channel (Ferris, Bongers, & de Goede, 2001). In addition, the Structure and Enrichment indices can be displayed in a biplot where nematode assemblages are plotted along a structure (x-axis) and enrichment (y-axis) trajectory (increasing index values). Each biplot quadrat reflects different levels of disturbance, soil nutrient pools and decomposition pathways (Ferris, Bongers, & de Goede, 2001).
The plant surveys were conducted on the 25 m2 permanent plots in June 2017. Plant species cover was visually assessed according to the semi-quantitative cover-abundance scale of Braun-Blanquet (1964; nomenclature: Lauber & Wagner, 1996). We calculated number of species and Shannon diversity, and assessed plant community composition. We also counted the number of target species (all species recorded in the eleven target plots plus propagules of species applied by hand, resulting in a total of 143 species) and categorized plant species into species of concern based on their red list status in Switzerland as well as their protection status in Switzerland and the Canton Zurich (Moser, Gygax, Bäumler, Wyler, & Palese, 2002). Furthermore, we calculated indicator values for soil moisture and soil nutrients for each species according to Landolt et al. (2010).

 References
Baudirektion Kanton Zürich (2007). 10 Jahre Naturschutz-Gesamtkonzept für den Kanton Zürich 1995-2005 – Stand der Umsetzung. Zürich: Baudirektion Kanton Zürich.
Bongers, T. (1988). De nematoden van Nederland. Utrecht: Stichting Uitgeverij Koninklijke Nederlandse Natuurhistorische Vereniging.
Bongers, T. (1990). The maturity index: an ecological measure of environmental disturbance based on nematode species composition. Oecologia, 83, 14-19. doi:10.1007/BF00324627
Bongers, T., van der Meulen, H., & Korthals, G. (1997). Inverse relationship between the nematode maturity index and plant parasite index under enriched nutrient conditions. Applied Soil Ecology, 6, 195-199. doi:10.1016/S0929-1393(96)00136-9
Braun-Blanquet, J. (1964). Pflanzensoziologie, Grundzüge der Vegetationskunde (3rd ed.). Wien: Springer.
Delarze, R., Gonseth, Y., Eggenberg, S., & Vust, M. (2015). Lebensräume der Schweiz: Ökologie - Gefährdung - Kennarten (3rd ed.). Bern: Ott.
Ferris, H., Bongers, T., & de Goede, R.G.M. (2001). A framework for soil food web diagnostics: extension of the nematode faunal analysis concept. Applied Soil Ecology, 18, 13-29. doi:10.1016/S0929-1393(01)00152-4
Landolt, E., Bäumler, B., Erhardt, A., Hegg, O., Klötzli, F., Lämmler, W., … Wohlgemuth, T. (2010). Flora indicativa. Ecological indicator values and biological attributes of the Flora of Switzerland and the Alps (2nd ed.). Bern: Haupt.
Lauber, K., & Wagner, G. (1996). Flora Helvetica. Flora der Schweiz. Bern: Haupt.
MeteoSchweiz (2018). Klimabulletin Jahr 2017, Zürich: MeteoSchweiz.
Moser, D., Gygax, A., Bäumler, B., Wyler, N., & Palese, R. (2002) Rote Liste der gefährteten Farn- und Blütenpflanzen der Schweiz. Bern: BUWAL.
Oostenbrink, M. (1960). Estimating nematode populations by some selected methods. In N.J. Sasser & W.R. Jenkins (Eds.), Nematology (pp. 85-101). Chapel Hill: University of North Carolina Press.
Sieriebriennikov, B., Ferris, H., & de Goede, R.G.M (2014). NINJA: An automated calculation system for nematode-based biological monitoring. European Journal of Soil Biology, 61, 90-93. doi:10.1016/j.ejsobi.2014.02.004

diversity

display_name: diversity

grassland

display_name: grassland

long-term-experiment

display_name: long-term-experiment

nematodes

display_name: nematodes

restoration

display_name: restoration

topsoil-removal

display_name: topsoil-removal

vegetation

display_name: vegetation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Grassland restoration: nematodes and plant communities


lwf-tea-bag-sites

maintainer: Marcus Schaub

title_for_slug: lwf-tea-bag-sites

en: forest modeling decomposition litter tea-bag green-tea roiboos carbon verification

en: Site Information

en: Descriptive information on sites

en:
Decomposition of plant litter is a key process for the transfer of carbon and nutrients in ecosystems. Carbon contained in the decaying biomass is released to the atmosphere as respired CO2, and may contribute to global warming. Litterbag studies have been used to improve our knowledge of the drivers of litter decomposition, but they lack comparability because litter quality is plant species-specific. The use of commercial tea bags as a standard substrate was suggested in order to harmonize studies, where green tea and rooibos represent more labile and more recalcitrant C compounds as surrogates of local litter.
The tea bag approach was implemented on eight sites of the Swiss long-term Forest Ecosystem Research (LWF) network (https://www.wsl.ch/LWF). This allowed us to take advantage from the existing infrastructure and data from a previous litterbag study with local litter. In Beatenberg and Schaenis, additional elevation transects were established (1200-1800 m and 540-1150 m, respectively) to examine particularly the effect of temperature on decomposition. In Pfynwald (https://www.wsl.ch/de/ueber-die-wsl/versuchsanlagen-und-labors/flaechen-im-wald/pfynwald.html) and Salgesch, infrastructure of running projects was used to examine the effect of drought and understory removal, respectively. In Novaggio, tea bags were incubated in summer and winter to study the effect of seasonality particularly precipitation. Tea bags are collected after 3, 12, 24, and 36 months; for the two time-shifted experiments additionally after 6 and 9 months.
The study has two primary objectives. Firstly, it contributes to TeaComposition initiative (http://teacomposition.org/) which aims at investigating long-term litter decomposition and its key drivers at present as well as under different future climate scenarios using a common protocol and standard litter (tea) across nine terrestrial biomes. Secondly, the data are used to further develop decomposition models such as Yasso (http://en.ilmatieteenlaitos.fi/yasso) which is used by several countries, including Switzerland to estimate the annual carbon fluxes in dead wood, litter, and soil for reporting in National Greenhouse Gas Inventories under the United Nations Framework Convention on Climate Change and the Kyoto Protocol.

carbon

display_name: carbon

decomposition

display_name: decomposition

forest

display_name: forest

green-tea

display_name: green-tea

litter

display_name: litter

modeling

display_name: modeling

roiboos

display_name: roiboos

tea-bag

display_name: tea-bag

verification

display_name: verification

en: LWF-Tea bag sites


maintainer: Thorsten Bartels-Rausch

en: reaction ozone brine solution alpine metamorphism interface arctic snow chemistry heterogeneous antarctica laboratory-study

en: Data Figure 1

media_type: dat

en: Data of published Figure

en: Readme file

en: This file shows data, code, and plots.

en: Acetone data

en:
intensity of the acetone-water-cluster and water-cluster (as derived by a chemical ionisation mass spectrometer) with time in the carrier gas downstream of packed bed flow tube holding the snow sample or the by-pass, respectively. Time "0" denotes the time when the mass spectrometer data acquisition was started. When the carrier
gas with acetone was passed via the packed bed flow tube, that is switched from by-pass to pass the snow, acetone concentration in the carrier gas rapidly dropped due to surface adsorption and slowly recovered as the adsorption sites saturate. From this, the surface area can be obtained.

en: data list

en: Lists file names, snow sample properties, and flow settings for each data-set.

en: Matlab Data

media_type: mat

en: All data as Matlab mat file

en: Matlab Script to view and plot data

media_type: .m

en: Ozone data

en: Trend of ozone mixing ratio ( _O3mixingRatio_ppb_ with time ( _time_s_ ) as measured downstream of the snow sample during the experiments. Time "0" denotes the time when data acquisition with ozone analyser was started. And, ozone (_nOzone_molec_per_s_ ) loss for each experiment with duration of ozone exposure ( _duration_s_ ) of ozone exposure, as derived from the ozone trends shown above. Time "0" denotes the time when the carrier gas with ozone was passed via the snow sample.

en: Earth’s snow cover is very dynamic on diurnal time scales. The changes to the snow structure during this metamorphism have wide ranging impacts such as on avalanche formation and on the capacity of surface snow to exchange trace gases with the atmosphere. Here, we investigate the influence of dry metamorphism, which involves fluxes of water vapor, on the chemical reactivity of bromide in the snow. For this, the heterogeneous reactive loss of ozone at a concentration of 5-6E12 molecules cm-3 is investigated in artificial, shock-frozen snow samples doped with 6.2 uM sodium bromide and with varying metamorphism history. The oxidation of bromide in snow is one reaction initiating polar bromine releases and ozone depletions.

alpine

display_name: alpine

antarctica

display_name: antarctica

arctic

display_name: arctic

brine

display_name: brine

chemistry

display_name: chemistry

heterogeneous

display_name: heterogeneous

interface

display_name: interface

laboratory-study

display_name: laboratory-study

metamorphism

display_name: metamorphism

ozone

display_name: ozone

reaction

display_name: reaction

snow

display_name: snow

solution

display_name: solution

en: Data set on bromide oxidation by ozone in snow during metamorphism from laboratory study


en: wind-speed meteorology temperature precipitation meteo par long-term relative-humidity climate-change swiss-forest-lab

en: Site photo of the field station (NOF)

en: Site photo of the field station from the side.

en: Field station data (NOF)

en: Data file.

en: Site photo of the forest station (NOB)

en: Site photo of the forest station from the side.

en: Data plot of the field station (NOF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the forest station (NOB)

en: Forest station data (NOB)

en: Site aerial photo (Novaggio)

en: Site aerial photo from both Novaggio stations. Source: Google. 2016. Site aerial photo from both Novaggio stations. Retrieved November 15, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Novaggio in Switzerland where one station is located within a natural deciduous forest stand (NOB) with Turkey oak (_Quercus cerris_; 70 yrs), sweet chestnut (_Castanea sativa_; 90 yrs) and silver birch (_Betula pendula_; 70 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Novaggio is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Novaggio, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


en: solar-radiation temperature relative-humidity soil-water-balance precipitation growing-season-length growing-degree-days

en: CHELSA-BIOCLIM+

media_type: geotiff

en: Global extented set of bioclimatic variables at different temporal (e.g. monthly, annual, long term normals) resolution in Geotiff format.

format: GeoTIFF

en: CHELSA-BIOCLIM+ Technical Documentation

media_type: PDF

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en: A multitude of physical and biological processes on which ecosystems and human societies depend are governed by climatic conditions. Understanding how these processes are altered by climate change is central to mitigation efforts. Based on mechanistically downscaled climate data, we developed a set of climate-related variables at yet unprecedented spatiotemporal detail as a basis for environmental and ecological analyses. We created gridded data for near-surface relative humidity (hurs), cloud area fraction (clt), near-surface wind speed (sfcWind), vapour pressure deficit (vpd), surface downwelling shortwave radiation (rsds), potential evapotranspiration (pet), climate moisture index (cmi), and site water balance (swb), at a monthly temporal and 30 arcsec spatial resolution globally starting 1980 until 2018. At the same spatial resolution, we further estimated climatological normals of frost change frequency (fcf), snow cover days (scd), potential net primary productivity (npp), growing degree days (gdd), and growing season characteristics for the periods 1981-2010, 2011-2040, 2041-2070, and 2071-2100, considering three shared socioeconomic pathways (SSP126, SSP370, SSP585) and five Earth system models. Time-series variables showed high accuracy when validated against observations from meteorological stations. Climatological normals were also highly correlated to observations although some variables showed notable biases, e.g., snow cover days (scd). Together, the data sets presented here allow improving our understanding of patterns and processes that are governed by climate, including the impact of recent and future climate changes on the world’s ecosystems and associated services to societies.

growing-degree-days

display_name: growing-degree-days

growing-season-length

display_name: growing-season-length

soil-water-balance

display_name: soil-water-balance

solar-radiation

display_name: solar-radiation

en: CHELSA-BIOCLIM+ A novel set of global climate-related predictors at kilometre-resolution


maintainer: Anita C. Risch

en: worldwide grassland soil-chemistry nutrient-network mineralization global soil soil-biology

en:
site.code: Site code

Continent: Continent

sampleID: Sample ID

nn.latitude: Lattitude

nn.longitude: Longitude

bioclim.T.ann: Mean annual temperature (°C)

bioclim.T.var: Temperature variability (°C)

bioclim.T.q.wet: Temperature of the wettest quarter (°C)

bioclim.T.q.dry: Temperature of the driest quarter (°C)

bioclim.T.q.warm: Temperature of the warmest quarter (°C)

bioclim.P.ann: Mean annual preciptiation (mm)

bioclim.P.q.wet: Precipitation of the wettest quarter (mm)

ch.pH: pH

ch.WSK.vol: Water holding capacity (vol%)

ch.bulkdensity.gcm3: Bulk density (g cm-3)

ch.porespace: Pore space (vol%)

ch.sand.perc: Soil texture: sand (%)

ch.silt.perc: Soil texture: silt (%)

ch.clay.perc: Soil texture: clay (%)

ch.NO3start.mgg: NO3 at the beginning of the incubation (mgkg)

ch.Ntot.perc: Total soil N (%)

ch.Ctot.perc: Total soil C (%)

ch.Corg.perc: Soil organic C (%)

ch.netNminfield.mgkgd: Realised soil net N mineralisation (mg kg-1 d-1)

ch.netNminlab.mgkgd: Potential soil ne N mineralisation (mg kg-1 d-1)

archaea.cpg.log: Ammonia oxidising archaea (archaeal amoA gene copies g-1 soil)

bacteria.cpg.log: Ammonia oxidising bacteria (bacterial amoA gene copies g-1 soil)

micr.biom: Microbial biomass (ug g-1 soil)

ch.CtoN: C to N ratio

ch.netNnitriffield.mgkgd.sqrt: Realised soil net nitrification, transformed (mg kg-1 d-1)

ch.netNammoniffield.mgkgd.sqrt: Realised soil net ammonification, transformed (mg kg-1 d-1)

ch.netNnitriflab.mgkgd.sqrt: Potential soil net nitrification, transformed (mg kg-1 d-1)

ch.netNammoniflab.mgkgd.sqrt: Potential soil net ammonifiation, transformed (mg kg-1 d-1)

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch, A. C.; Zimmermann, S.; Ochoa-Hueso, R.; Schütz, M.; Frey, B.; Firn, J. L.; Fay, P. A.; Hagedorn, F.; Borer, E. T.; Seabloom, E. W.; et al. Soil net nitrogen mineralisation across global grasslands. Nat. Commun. 2019, 10 (1), 4981 (10 pp.). doi.org/10.1038/s41467-019-12948-2

Please cite this paper together with the citation for the datafile.

We conducted coordinated measurements of realised and potential soil net Nmin, and assessed water holding capacity, bulk density, C and N content, texture, pH, pore space, microbial biomass, and archaeal (AOA) and bacterial (AOB) ammonia oxidiser abundance using identical materials and methods across 30 grasslands on six continents. The sites covered a globally relevant range of climatic and edaphic conditions. Climate data was obtained from worldclim - Global climate data https://www.worldclim.org/

global

display_name: global

grassland

display_name: grassland

mineralization

display_name: mineralization

nutrient-network

display_name: nutrient-network

soil

display_name: soil

soil-biology

display_name: soil-biology

soil-chemistry

display_name: soil-chemistry

worldwide

display_name: worldwide


maintainer: Alexandre Buttler

en: soil biogeochemisty transplantation-experiment silvopastoral-systems climate-change

en: Dataset

en: Zip archive of all datasets detailed in study.

en:
Silvopastoral systems are highly productive and combine long-term wood production with annual provision of forage for livestock. In the Swiss Jura Mountains these systems are a key component of the landscape. As in other cold biomes, climate change can potentially accelerate landscape change within these historically sustainable systems.

In order to anticipate the evolution of subalpine wooded pasture ecosystems under future climate and land-use changes, this project focused on the interplay between soil, vegetation and climate. It was aimed at providing experimental evidence for chief ecosystem processes, with emphasis on the quality of the ecosystem services provided. The main interest was placed on vegetation turf resistance to climate change along an unwooded – sparsely wooded - densely wooded pasture gradient (land-use intensity), where plant productivity, diversity and succession along with rates of carbon cycling and microbial activity provided measures of ecosystem functioning at both plot and landscape level.

Experimental transplantation of monolith soil turfs to lower altitudes allowed to simulate soil warming and reduced annual precipitation. In order to simulate a year-round warmer and drier climate the natural climate variation along an altitudinal gradient was used as a proxy. The aim was to simulate realistic climate change scenarios for the second half of the 21st century predicted by the IPCC report and downscaled for Switzerland providing regionalized interpolated projections integrating therein trends for temperature increase and precipitation decrease. By using permanent meteorological stations within the network of the Federal Office of Meteorology and Climatology (MeteoSwiss), we obtained high resolution regional data on the variation of mean annual temperature (MAT) and mean annual precipitation (MAP) in relation to altitude in the Swiss Jura Mountains. We observed a general increase of +0.5 K in MAT and a decrease of -20 % MAP for each 100 m decrease in altitude along the SE slope of the Swiss Jura Mountains. These relationships served for the selection of the transplantation sites such that in comparison to a control site at 1350 m a.s.l. (Combe des Amburnex, N 46°54’, E 6°23’) a +2 K MAT and -20 % MAP was achieved at 1010 m a.s.l. (Saint-George, N 46°52’, E 6°26’), a +4 K MAT and -40 % MAP at 570 m a.s.l., (Arboretum d’Aubonne, N 46°51’, E 6°37’), and a +5 K MAT and -50 % MAP at 395 m a.s.l. (Les Bois Chamblard, N 46°47’, E 6°41’). The two stations at 1010 m a.s.l. and 570 m a.s.l. corresponded to the IPCC scenario A1B for a moderate increase in greenhouse gas emissions and to scenario A2 for a high increase in greenhouse gas emissions, respectively. The station at 395 m a.s.l. was chosen to represent an extreme scenario with climate variables lying at the positive tail distribution of model predictions under the A2 scenario.

Soil cores were assembled into rectangular PVC boxes of 60  80 cm2 size and of 35 cm height. All mesocosms were dug down to surface level into previously prepared trenches in the ground thus preventing lateral heat exchange with the atmosphere. Since at each site the mesocosms were placed in a common garden with no light interception, mesocosms with turfs from the two wooded pastures were shaded from direct sun light to simulate the natural light conditions in the corresponding habitats. Each mesocosm was equipped with a drainage system and was connected to a water tank thus representing a zero potential lysimeter collecting soil solution and precipitation/snowmelt runoff. ECH2O EC-TM sensor probes coupled to Em50 data-loggers (Decagon Devices, Inc., USA) recorded soil temperature and volumetric water content in each mesocosm at the top-soil (0 to -3 cm) every minute and data were averaged over one hour intervals. Climate parameters at each transplantation site were monitored continuously throughout the experiment by means of automated weather stations (Sensor Scope Sàrl, Switzerland), measuring rain precipitation (non-heated tipping bucket gauges) and air temperature and humidity 2 m above the ground surface at one minute intervals.

A list of above- and belowground variables were measured to assess the resilience of biogeochemical processes, plant productivity, tree regeneration, and carbon sequestration for each respective land-use practice. Furthermore, the experimental data were used to improve on (parameterization) the existing spatially explicit, dynamic model WoodPaM and refine the modelʼs climatic and land-use variables so that different scenarios of climate change and land use change could be simulated. Natural and management induced disturbance patterns were incorporated into the model.
The data have been made available within the project CCES Mounted. The climate stations Sensorscope are still in use within the project CLIMARBRE (Wald und Klimawandel, WSL/BAFU).

#References

1. Puissant, J., Cécillon, L., Mills, R.T.E., Robroek, B.J.M. Gavazov, K., De Danieli, S., Spiegelberger, T., Buttler, A., Brun, J.J. 2015. Seasonal influence of climate manipulation on microbial community structure and function in mountain soils. Soil Biology and Biochemistry 80: 296–305.
2. Mills, R., K. Gavazov, T. Spiegelberger, D. Johnson and A. Buttler 2014. Diminished soil functions occur under simulated climate change in a sup-alpine pasture, but heterotrophic temperature sensitivity indicates microbial resilience. Science of the Total Environment, vol. 473–474(0): 465-472.
3. Gavazov, K., Spiegelberger, T. and Buttler, A. 2014. Transplantation of subalpine wood-pasture turfs along a natural climatic gradient reveals lower resistance of unwooded pastures to climate change compared to wooded ones. Oecologia (174) : 1425-1435.
4. Peringer A., Siehoff S., Chételat J., Spiegelberger T., Buttler A. & Gillet F. 2013. Past and future landscape dynamics in pasture-woodlands of the Swiss Jura Mountains under climate change. Ecology and Society, 18, 3: 11. DOI: 10.5751/ES-05600-180311. [online] URL: http://www.ecologyandsociety.org/vol18/iss3/art11/
5. Gavazov, K. S., A. Peringer, A. Buttler, F. Gillet and T. Spiegelberger. 2013. Dynamics of Forage Production in Pasture-woodlands of the Swiss Jura Mountains under Projected Climate Change Scenarios. Ecology and Society 18 (1): 38. [online] URL: http://www.ecologyandsociety.org/vol18/iss1/art38/

biogeochemisty

display_name: biogeochemisty

climate-change

display_name: climate-change

silvopastoral-systems

display_name: silvopastoral-systems

transplantation-experiment

display_name: transplantation-experiment

en: Biogeochemical data from a transplantation experiment of monolith soil turfs along an altitudinal gradient to simulate climate change scenarios


maintainer: Leo Gallus Bont

en: seilaplan accessible-forest openstreetmap qgis geoprocessing forest

en: Power lines vector data (close to the area of the sample forest range)

en: Preview

media_type: image/png

format: PNG

mimetype: image/png

en: Juypter Notebook for Data Preparation (online)

media_type: ipynb

en: Railways vector data (close to the sample forest range)

en: Forest vector data (for sample forest range)

en: Digitised sample perimeter

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en: Juypter Notebook for Data Preparation

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

forest

display_name: forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019


en: uncertainty natural-climate-variability climate-change-impact rain-on-snow snow-water-equivalent cryosphere

en: climate realizations

en: The dataset contains for three variables (snow water equivalent, surface water input and liquid precipitation) 50 realizations of current and future climate periods for two time horizons (mid end end of century), two emission senarions (RCP 4.5 and 8.5) and 10 climate model chains (all EUR11 chains within CH2018). To quantify natural climate variability for projections of snow conditions and resulting rain-on-snow (ROS) flood events, a weather generator was applied to simulate inherently consistent climate variables for multiple realizations of current and future climates at 100 m spatial and hourly temporal resolution over a 12 x 12 km high-altitude study area in the Swiss Alps. The output of the weather generator was used as input for subsequent simulations with an energy balance snow model. The data was extracted in 2021 from original model output.

climate-change-impact

display_name: climate-change-impact

cryosphere

display_name: cryosphere

natural-climate-variability

display_name: natural-climate-variability

rain-on-snow

display_name: rain-on-snow

snow-water-equivalent

display_name: snow-water-equivalent

uncertainty

display_name: uncertainty

en: Multiple realizations of daily snow water equivalent, surface water input and liquid precipitation projections for mid- and late-century


en: meteorology meteo wind-speed par temperature climate-change long-term swiss-forest-lab precipitation relative-humidity

en: Field station data (LAF)

en: Data file.

en: Data plot of the forest station (LAB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Lausanne)

en: Site aerial photo from both Lausanne stations. Source: Google. 2016. Site aerial photo from both Lausanne stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Site photo of the forest station (LAB)

en: Site photo of the fforest station from the side.

en: Forest station data (LAB)

en: Data plot of the field station (LAF)

en: Site photo of the field station (LAF)

en: Site photo of the field station from the side.

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Lausanne in Switzerland where one station is located within a natural mixed forest stand (LAB) with European beech (_Fagus sylvatica_; 160-170 yrs), European silver fir (_Abies alba_; 160-170 yrs) and Norway spruce (_Picea abies_; 160-170 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, LAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Lausanne is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Lausanne, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


en: air-temperature last-glacial-maximum glaciers paleo-climate orography precipitation

en: Data Access via S3

en:
High resolution, downscaled climate model data are used in a wide variety of applications in environmental sciences. Here we present the CHELSA-TraCE21k downscaling algorithm to create global monthly climatologies for temperature and precipitation at 30 arcsec spatial resolution in 100 year time steps for the last 21,000 years. Paleo orography at high spatial resolution and at each timestep is created by combining high resolution information on glacial cover from current and Last Glacial Maximum (LGM) glacier databases with the interpolation of a dynamic ice sheet model (ICE6G) and a coupling to mean annual temperatures from CCSM3-TraCE21k. Based on the reconstructed paleo orography, mean annual temperature and precipitation was downscaled using the CHELSA V1.2 algorithm.

The data is published under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

en: Technical documentation

media_type: .pdf

en: Technical documentation containing file metadata and variable descriptions.

air-temperature

display_name: air-temperature

glaciers

display_name: glaciers

last-glacial-maximum

display_name: last-glacial-maximum

orography

display_name: orography

paleo-climate

display_name: paleo-climate

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: CHELSA-TraCE21k: Downscaled transient temperature and precipitation data since the last glacial maximum


en: spatial-information urban-region strategic-plans development-priorities europe

en: Planning intentios

en:
The present dataset is part of the report titled Gradinaru S.R., Hersperger A.M., Schmid F. (2021). Deriving Planning Intentions from written planning documents. Report on CONCUR Project- From plans to land change: how strategic spatial planning contributes to the development of urban regions.
The data corresponds to the data collected as part of the DPI Method for deriving all PIs contained in a plan (open coding) as detailed in section 4 of the report. The method involved reading the plans to break down of information in meaningful discrete “incidents” or planning intentions. To identify the planning intentions, the starting points were represented by a) the structuring of the plans in chapters and sub chapters and b) the themes that the plans addressed. Thus, the collected information was not grouped according to pre-defined categories of planning intentions, but rather put together as a list of intentions as revealed by each plan. As a result, we provide, for each case study, a document (named [Urban region name] PI as defined in the plan) which contains:
	Date when the information was filled in.
	Name of the urban region and analysed strategic spatial plan .
	A list of all planning intentions contained in a plan, with each PI being addresses as follows:
	Name of PI as it appears in the plan
	Translated name of the PI (i.e. short name for easy understanding of the meaning)
	Explanation regarding the meaning of the PI
	Why the PI is considered a priority for the urban region
	Spatial information on the PI (text and cartographic representations).
In total, 14 documents are available, one for each case study. Documents contain up to 20 pages of information extracted from the plans together with explanations and notes taken during plan reading.

development-priorities

display_name: development-priorities

europe

display_name: europe

spatial-information

display_name: spatial-information

strategic-plans

display_name: strategic-plans

urban-region

display_name: urban-region

en: Planning intentions in strategic plans of European urban regions


weissfluhjoch-dataset-for-esm-snowmip

maintainer: Nander Wever

title_for_slug: weissfluhjoch-dataset-for-esm-snowmip

en: weissfluhjoch snow-depth snow-models esm-snowmip snow

en: ini file

en: This ini file is required by data-converter from MeteoIO version 1887 (http://models.slf.ch/p/meteoio/)

en: Dataset Weissfluhjoch for ESM-SnowMIP

en: Conversion script

media_type: text/x-sh

en:
Use this script to convert WFJ_optimaldataset_v6.smet to wfj.smet, the file that is used for the ESM-SnowMIP project. It also requires the file: WFJ_AirPressure_Data.zip

Use: bash create_wfj_dataset.sh > input/wfj.smet

mimetype: text/x-sh

en: This Weissfluhjoch dataset is a processed version of the Weissfluhjoch dataset version 6 from https://doi.org/10.16904/6. This dataset was specially created for the ESM-SnowMIP project. Here it is documented how this dataset has been created.

esm-snowmip

display_name: esm-snowmip

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-models

display_name: snow-models

weissfluhjoch

display_name: weissfluhjoch

en: Weissfluhjoch dataset for ESM-SnowMIP


en: pinales species-distribution-model species-occurrence species-range-map fagales species-richness

en: Occurrence maps for species of Fagales and Pinales with few records

media_type: ZIP

en: Point_buffer.zip includes 267 occurrence maps of species that do not have enough occurrence data for polygon mapping.

en: Species range maps of species in Fagales and Pinales (with enough occurrences)

en: species_map.zip includes species 1690 range maps generated based on the integrated method described in Lyu et al., (2022). File names with (polygon) indicate that this map is only generated by polygon mapping, as there are not enough occurrences for SDMs.

en:
This database contains 1957 distribution maps of species from Fagales and Pinales constructed based on a method integrating polygon mapping and SDMs (Lyu et al., 2022).
To construct the maps, we first collected occurrence data from 48 different sources. According to the number of occurrences after data cleaning, three kinds of maps are constructed: (1) For species with more than 20 occurrences, we performed SDM and polygon mapping described in Lyu et al. (2022) and select the integration of the two layers as the distribution range; (2) For species with more than 4 but less than 20 occurrences, we only use polygon mapping to draw the distribution range; (3) For species with less than 4 occurrences, a 20-km buffer was generated around the occurrences as the distribution range. The maps were manually checked and evaluated (see Note S3 and Table S9 in Lyu et al., 2022 for details).

fagales

display_name: fagales

pinales

display_name: pinales

species-distribution-model

display_name: species-distribution-model

species-occurrence

display_name: species-occurrence

species-range-map

display_name: species-range-map

species-richness

display_name: species-richness

en: Species distribution maps of Fagales and Pinales (GDPlants)


en: failure-layer snow-stratigraphy snowpack rutschblock snowpack-simulation snow-profiles snow-instability

en: DAV data set: Properties of observed snow profiles and simulated failure layers

media_type: CSV

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

en: Observed snow profiles

media_type: .csv

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en: ReadMe

en: ReadMe file explaining data structure and content

en: Simulated snow profiles

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-instability

display_name: snow-instability

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack

display_name: snowpack

snowpack-simulation

display_name: snowpack-simulation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Observed and simulated snow profile data


en: biogeography pairwise-stand-comparisons forest-management soil-impacts biodiversity

en: references

media_type: XLS

en: Bibliography of all references cited in data_wohlgemuth_etal_Neobiota_2022.

en: Baseline data

en: headers

media_type: ascii, tab separated, also as excel table

en: Description of headers for data_wohlgemuth_etal_Neobiota_2022

en: Compiled data on the impacts of seven important NNTs (Acacia dealbata, Ailanthus altissima, Eucalyptus globulus, Prunus serotina, Pseudotsuga menziesii, Quercus rubra, Robinia pseudoacacia) on physical and chemical soil and biodiversity in Europe, and summarise commonalities and differences. A total of 107 publications considered, studies referred to biodiversity attributes and soil properties: 2804 lines and 30 rows.

biodiversity

display_name: biodiversity

biogeography

display_name: biogeography

forest-management

display_name: forest-management

pairwise-stand-comparisons

display_name: pairwise-stand-comparisons

soil-impacts

display_name: soil-impacts

en: Impact of non-native tree species in Europe on soil properties and biodiversity: a review


en: ecosystem-protection decision-making gis integral-water-management hydropower

en: Indicators

media_type: text/markdown

en: The indicators capture supporting ecosystem functions.

media_type: SHP

format: SHP

en:
 A spatial dataset and tool to simultaneously assess hydropower potential and ecological potential of the Swiss river network (Version 2016)

 Introduction
The steadily growing demand for energy and the simultaneous pursuit of decarbonisation are increasing interest in the expansion of renewable energies worldwide. In Switzerland, various funding projects have been launched to promote technologies in the field of renewable energies and their application as quickly as possible. With the introduction of a funding instrument in 2009, the number of projects submitted to produce renewable energies increased rapidly. The applications for small hydropower plants (≤ 10 MW) were correspondingly numerous. However, the assessment of the environmental impact and its comparison with hydropower importance is still not standardized.
To provide a basis for decision-making, a methodology was developed to determine the overall hydropower potential of a region. A detailed assessment of each river reach, and the systematic and holistic assessment of small hydropower projects at a regional scale are combined here. The assessment of a river reach is conducted at the river space (i.e., the river and adjacent areas) and at the surrounding landscape level. The HYDROpot_integral methodology was developed as part of Carol Hemund's dissertation (2012) at the University of Bern. It allows the evaluation of river reaches holistically, regarding ecological, social, economic and cultural criteria. As a second part of the overall project, the theoretical hydropower (or hydraulic) potential was calculated for the entire river network, which complemnets the spatial assessment. In particular, it is possible to classify river reaches into those that are more suitable for hydropower production (=”use”) and those that are more suitable for protection.

 Material and method
The HYDROpot_Integral method was developed and tested on the basis of cantonal and national data (Hirschi et al. 2013). The method relies on 73 geodata sets. This holistic assessment is the key element of the entire assessment procedure. Its aim is to quantify the importance of the ecosystem functions in terms of services. The river network (GWN07) is divided into reaches of about 450m and for each reach two study units are defined. The river space (RS) records the ecosystem functions of the water body and the nearby riparian area. The length of the RS is 315 m on average in Switzerland and a maximum of 450 m, whereas the width is based on the FOEN definition (BWG 2001: 18f) and varies between 7-107 m. The surrounding landscape (SLS) is the second survey unit that records the ecosystem functions of the surrounding area over a range of 21 m to 321 m. The SLS is calculated over three times the RS width. The length of the SLS is identical to the length of the RS. The ecosystem functions are divided into three types: regulating (service A), cultural (service B) and provisioning (service C) functions. Accordingly, the assessment of the functions is divided into three parts and three values are assigned to each river reach. The more functions there are and the greater their performance, the higher these values are and the more important the corresponding functions are. Hence, these values quantify the importance of the ecosystem functions and the ecological, cultural and economic ecosystem services of each river reach. The concatenation of ecosystem services results in a value (ABC) that can occur in 125 different versions due to the chosen five-level value scale; i.e. each digit of the three-digit number sequence can be assigned a value between 1 and 5. Each of the 125 combinations, and thus each river reach, has its own characteristics determined by the assessments of the three function types. To record the suitability, the combinations are ranked according to their ecological, cultural and economic ecosystem services. These rules mean that the combination that is most suitable for hydropower production at minimum cost in terms of ecological and cultural ecosystem services and has a high economic potential is ranked first; rank 125 indicates the highest ecological and cultural ecosystem services and the lowest economic services and is therefore most suitable for protection. A river reach that is excluded from hydropower use due to legislation, a so-called priority reach, is given rank 126 from the outset and specially marked. A more detailed description of the methods can be found in Hirschi et al. 2013 [Link]. The dataset presented here presents the latest state of the HYDROpot_integral methodology applied at the national level. Only national data that is easily accessible was used in the preparation of the dataset. The cantonal data, such as renaturation and revitalization, would have to be requested by each canton individually and was excluded here. The nationwide value synthesis was made with R.
A list of data sources can be found here [link to text file]
A list of all parameters can be downloaded here [link to PDF and text files]

 Dataset description
Data is presented as a single shapefile. It contains the river network and all assessment results obtained with HYDROpot_Integral.

 Changes in the methodology compared to the original method (Hirschi et. al 2013)

 * RS_A11 Ecomorphology: recorded for the whole of Switzerland and zero values equated with NA;
individual cantons such as Zug and St. Gallen have no mapped values according to the modular
concept of the federal government, Valais and Graubünden only the main valleys, Ticino and Fribourg not
completely (BAFU 2009).
 * RS_A14 Renaturation and revitalization data: not centrally available at the time of data collection.
centrally available, therefore values in GR were equated with NA.
 * RS_A15 Dilution ratio at wastewater treatment plants (WWTPs) for discharges: Zero values
equal to NA.
 * RS_A20 Water flow: use WASTA (2013) with hydroelectric power plants (> 300 kW) under
Federal control and dams serving hydroelectricity (Dam, as of 2013).
 * RS_C05 Synoptic hazard maps: are cantonally managed at the time of data collection,
Values in GR are marked with a 5 so that the systematics in the decision tree is not affected.
is affected.
 * Water quality (RS_A15, RS_A16, RS_A17, RS_A18, RS_A19): for the evaluation of the function type.
A Nature, it is important whether the median of the five values is less than or equal to 3 in total. This
evaluation is based on the decision tree for evaluating GR (Hirschi et al. 2013:22).
Therefore, an evaluation of the station data is made where critical and possible river segments
with poor quality (median less than 3) exist. Only two longer and one short
sections in Switzerland receive a lower median than 3 for water quality.
 * SLS_B06 Visibility: For 99 percent of the river segments (30,733 of 31,062) in the canton of
Bern (2015 reduced version), the landscape area is considered to be visible. Due to this high number
of sections, a large number of viewpoints in the layer of Swisstopo and
the computation time and computability in ArcGIS, the landscape area is classified as generally viewable
(equal to 1).
16 Method
Additional indicators were added (see Appendix B.2):
 * SLS_A21 Dissection
 * SLS_A22 Forest areas
 * SLS_B03 Hiking trails
 * SLS_B10 Residential and vacation homes
 * SLS_B11 Tourist infrastructure
 * SLS_C01 Landfill
 * SLS_C03 Infrastructure
 * SLS_C05 Industry
 * SLS_C06 Agricultural land
Not to be added, although present to some extent:
 * SLS_B06 Cultural assets of national importance: here, too, the calculability of the visibility analysis is
for the whole of Switzerland is limited
 * SLS_A15 Legally binding protection and land use planning: the individual river sections are not
clearly designated, i.e. no geodata exist
The following data are also not supplemented, as they are cantonal data:
 * SLS_A10 Cantonal nature reserves
 * SLS_A16 Forest reserves
 * SLS_A17 Cantonal inventories and contractually protected areas

decision-making

display_name: decision-making

ecosystem-protection

display_name: ecosystem-protection

gis

display_name: gis

hydropower

display_name: hydropower

integral-water-management

display_name: integral-water-management


en: outgoing weissfluhjoch shortwave-radiation incoming longwave-radiation

en: Metadata

media_type: application/pdf

en: Parameter file

media_type: text/plain

format: TXT

mimetype: text/plain

en: Processing doc

en: DATA ACCESS

en:
Corrected incoming and outgoing shortwave and longwave 2 min radiation measurements at the Weissfluhjoch summit, Davos, CH.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

incoming

display_name: incoming

longwave-radiation

display_name: longwave-radiation

outgoing

display_name: outgoing

shortwave-radiation

display_name: shortwave-radiation

weissfluhjoch

display_name: weissfluhjoch

en: ASRB_WFJ: Shortwave and longwave radiation measurements (2 min) at the Weissfluhjoch research site, Davos


en: spatial-planning land-use-simulations digital-zoning-plans land-use-change land-use-transformations

media_type: ascii x, y, z

en: Legend simulated maps

en:
Table of Content: 1. General context of the data set "LUSzoning”; 2. Background and aims of the study using the data set LUSzoning; 3. The data set LUSzoning.
1. General context of the data set "LUSzoning".
The data set "LUSzoning" stands for Land-use simulations integrating zoning regulations in Spanish functional urban areas. The data set has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2021. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, digital zoning plans) into quantitative land-change modelling approaches at the urban regional level.
2.	Background and aims of the study using the data set “LUSzoning”.
As part of the CONCUR project, a specific task was to integrate planning spatial policies in land-change modelling. Planning can be implemented in modelling using either hard or gradual restrictions. Different studies have addressed the inclusion of spatial planning policies in land-use change modelling. However, the integration of zoning constraints is generally established as hard or Boolean-based restrictions (e.g., whether urban development is allowed or not), while not accounting for the spatial heterogeneity or gradual characteristics within planning zones (e.g., whether planning regulations allow low, medium or high urban density), though these could improve real patterns simulations in urban areas. We assume Spanish General Zoning plans were suitable to explore the integration of planning into land-change modelling as soft constrains because they define land-use intensities in the buildable zoning areas. In light of the above considerations, the overall aim of the study was to model urban land-use changes using a multi-scenario approach that integrates digitized zoning plans for the Functional Urban Areas (FUAs) of Madrid, Barcelona, Valencia, and Zaragoza. The following specific objectives were addressed: i) to analyse the role of planning by defining three future scenarios that integrate digitized zoning plans and one scenario that assumes almost no planning intervention; ii) to introduce zoning constraints that reflect different degrees of urban densities; iii) to generate a transferable spatially-explicit modelling framework to integrate planning into land-use change simulations.
Four future land-use demands scenarios were defined for the FUAs. Storylines were created considering probable development scenarios related to zoning plans, current Spanish legislation and sustainability goals defined along two axes: a high market-oriented vs. high planning-intervention axis, and an axis of short-term economic growth vs. long-term sustainable growth. The sustainable development scenario (S1) is characterized by low gross floor area (GFA) growth that is limited to areas that are currently under development according to zoning plans. The business-as-usual scenario (S2) is characterized by medium GFA growth in the range of on-going trends. The strong development scenario (S3) is characterized by high GFA growth rates. Growth is restricted to buildable areas without urbanization project designated in zoning plans. The unrestricted development scenario (S4) prioritizes a high degree of market liberalization characterized by high GFA growth that surpasses population demands. S4 follows a rapid economic growth pattern with almost no planning intervention.
3.	 The data set “LUSzoning”.
The dataset includes 16 .asc raster layers providing the simulated land-uses under four defined scenarios for Barcelona, Madrid, Valencia and Zaragoza Functional Urban Areas (FUAs) for 2030. The simulated raster layers were created using CLUMondo simulation framework and have a spatial resolution of 30m. The .asc layers name include the name of the FUA and scenario number. For example, the output from simulating the urban growth for the city of Zaragoza under Scenario 2 is named “Zaragoza_S2.tif”. Furthermore, a .txt file named “Legend.txt” includes the numeric value of the land-use and the category of land-use that represents to interpret the .asc raster layers. The name of the land-use classes is a reclassification of the Urban Atlas 2012 land-use classes within the four Spanish FUAs analyzed.

digital-zoning-plans

display_name: digital-zoning-plans

land-use-change

display_name: land-use-change

land-use-simulations

display_name: land-use-simulations

land-use-transformations

display_name: land-use-transformations

spatial-planning

display_name: spatial-planning

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: LUSzoning: Land-use simulations integrating zoning regulations in Spanish functional urban areas


en: mountain-forest treeline-ecosystems stillberg foresty afforestation davos

en: Dataset V1

media_type: GDB

en: This dataset has been depricated in favour of an updated version.

format: GDB

en: Documentation

media_type: application/msword

mimetype: application/msword

en: Site photo

media_type: JPEG

en:
#Background Information

A history of many centuries of seasonal livestock grazing of alpine pastures has significantly depressed the treeline in many European mountain ranges. Therefore, observations of treeline patterns are more likely to be obscured by historical land use than in regions with less human influence and might not provide relevant information about environmental factors that influence mortality and growth patterns at the natural high-elevation limit of tree existence. To overcome this, we used a large afforestation experiment in the Swiss Alps, "Stillberg", to address the following questions:

Can trees survive above the current treeline in the European Alps? Are environmental factors that influence spatial patterns of mortality the same as those that influence height growth? Does the relative importance of these environmental variables change over the first 40 years after planting as seedlings?

#Dataset
The 5 ha Stillberg long-term afforestation research area is located near Davos (Central Alps, Switzerland). The bottom of the afforestation is approximately at the current treeline and it covers an altitudinal gradient of more than 150 m (2075 to 2230 m a.s.l.; see picture above). Approximately 92'000 seedlings of three treeline species (Larix decidua, Pinus mugo ssp. uncinata and Pinus cembra) were systematically planted in 1975, and mortality and height growth were closely monitored during the following 40 years.

Publications
Barbeito, I., Dawes, M. A., Rixen, C., Senn, J. and Bebi, P. (2012), Factors driving mortality and growth at treeline: a 30-year experiment of 92 000 conifers. Ecology, 93: 389–401. http://dx.doi.org/10.1890/11-0384.1

afforestation

display_name: afforestation

davos

display_name: davos

foresty

display_name: foresty

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline-ecosystems

display_name: treeline-ecosystems

en: Long-term treeline research dataset at Stillberg, Davos


maintainer: Avalanche Warning Service SLF

en: Avalanche fatalities per year in Switzerland since 1936/1937

en:
This dataset contains the statistics on the number of avalanche fatalities per hydrological year in Switzerland. The data set commences with the beginning of the hydrological year 1936/37 on 01/10/1936. After the completion of a hydrological year, the new data is appended to the existing dataset.

The following information is contained (by column and column title):
 - hydrological year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)

The definition for these four categories as described in the guidelines to the avalanche accident database:

**tour**:
activities include back-country ski, snowboard or snow-shoe touring

**offpiste**:
access from ski area, generally from the top of a skilift with short hiking distances

**transportation.corridors** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people travelling or recreating on open or temporarily closed
transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)

**buildings** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people inside or just outside buildings, and workers on high alpine building
sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

en: Number of avalanche fatalities per hydrological year in Switzerland since 1936-1937


maintainer: Stephan Zimmermann

en: fagus-orientalis-lipsky magnesium biogeochemical-cycling calcium potassium

en: Concentrations of Ca, Mg, K, and Na in throughfall, litterflow and soil solution of a Hyrcanian forst in Northern Iran

en:
Throughfall, litterflow and soil solution were sampled during one whole year under five Oriental beech trees in a mixed Hyrcanian beech forest. The amounts of Ca2+, Mg2+, K+ and Na+ in these fluxes were calculated based on their concentrations and the sampled volumes, and subsequently compared with the respective fluxes in the rainfall and soil solution of an adjacent forest gap.
In addition six soil profiles, one close to every single tree and one in the forest gap, were analyzed for pH, CaCO3, organic matter and texture.

biogeochemical-cycling

display_name: biogeochemical-cycling

calcium

display_name: calcium

fagus-orientalis-lipsky

display_name: fagus-orientalis-lipsky

magnesium

display_name: magnesium

potassium

display_name: potassium

en: Base cation dynamics in an Oriental beech forest