en: failure-layer snow-stratigraphy snowpack rutschblock snowpack-simulation snow-profiles snow-instability

en: DAV data set: Properties of observed snow profiles and simulated failure layers

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

en: Observed snow profiles

media_type: .csv

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en: ReadMe

en: ReadMe file explaining data structure and content

en: Simulated snow profiles

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-instability

display_name: snow-instability

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack

display_name: snowpack

snowpack-simulation

display_name: snowpack-simulation

en: Observed and simulated snow profile data


en: ecosystem-protection decision-making gis integral-water-management hydropower

state: active

type: dataset

en: Indicators

media_type: text/markdown

en: The indicators capture supporting ecosystem functions.

format: SERVICE

media_type: SHP

format: SHP

en:
 A spatial dataset and tool to simultaneously assess hydropower potential and ecological potential of the Swiss river network (Version 2016)

 Introduction
The steadily growing demand for energy and the simultaneous pursuit of decarbonisation are increasing interest in the expansion of renewable energies worldwide. In Switzerland, various funding projects have been launched to promote technologies in the field of renewable energies and their application as quickly as possible. With the introduction of a funding instrument in 2009, the number of projects submitted to produce renewable energies increased rapidly. The applications for small hydropower plants (≤ 10 MW) were correspondingly numerous. However, the assessment of the environmental impact and its comparison with hydropower importance is still not standardized.
To provide a basis for decision-making, a methodology was developed to determine the overall hydropower potential of a region. A detailed assessment of each river reach, and the systematic and holistic assessment of small hydropower projects at a regional scale are combined here. The assessment of a river reach is conducted at the river space (i.e., the river and adjacent areas) and at the surrounding landscape level. The HYDROpot_integral methodology was developed as part of Carol Hemund's dissertation (2012) at the University of Bern. It allows the evaluation of river reaches holistically, regarding ecological, social, economic and cultural criteria. As a second part of the overall project, the theoretical hydropower (or hydraulic) potential was calculated for the entire river network, which complemnets the spatial assessment. In particular, it is possible to classify river reaches into those that are more suitable for hydropower production (=”use”) and those that are more suitable for protection.

 Material and method
The HYDROpot_Integral method was developed and tested on the basis of cantonal and national data (Hirschi et al. 2013). The method relies on 73 geodata sets. This holistic assessment is the key element of the entire assessment procedure. Its aim is to quantify the importance of the ecosystem functions in terms of services. The river network (GWN07) is divided into reaches of about 450m and for each reach two study units are defined. The river space (RS) records the ecosystem functions of the water body and the nearby riparian area. The length of the RS is 315 m on average in Switzerland and a maximum of 450 m, whereas the width is based on the FOEN definition (BWG 2001: 18f) and varies between 7-107 m. The surrounding landscape (SLS) is the second survey unit that records the ecosystem functions of the surrounding area over a range of 21 m to 321 m. The SLS is calculated over three times the RS width. The length of the SLS is identical to the length of the RS. The ecosystem functions are divided into three types: regulating (service A), cultural (service B) and provisioning (service C) functions. Accordingly, the assessment of the functions is divided into three parts and three values are assigned to each river reach. The more functions there are and the greater their performance, the higher these values are and the more important the corresponding functions are. Hence, these values quantify the importance of the ecosystem functions and the ecological, cultural and economic ecosystem services of each river reach. The concatenation of ecosystem services results in a value (ABC) that can occur in 125 different versions due to the chosen five-level value scale; i.e. each digit of the three-digit number sequence can be assigned a value between 1 and 5. Each of the 125 combinations, and thus each river reach, has its own characteristics determined by the assessments of the three function types. To record the suitability, the combinations are ranked according to their ecological, cultural and economic ecosystem services. These rules mean that the combination that is most suitable for hydropower production at minimum cost in terms of ecological and cultural ecosystem services and has a high economic potential is ranked first; rank 125 indicates the highest ecological and cultural ecosystem services and the lowest economic services and is therefore most suitable for protection. A river reach that is excluded from hydropower use due to legislation, a so-called priority reach, is given rank 126 from the outset and specially marked. A more detailed description of the methods can be found in Hirschi et al. 2013 [Link]. The dataset presented here presents the latest state of the HYDROpot_integral methodology applied at the national level. Only national data that is easily accessible was used in the preparation of the dataset. The cantonal data, such as renaturation and revitalization, would have to be requested by each canton individually and was excluded here. The nationwide value synthesis was made with R.
A list of data sources can be found here [link to text file]
A list of all parameters can be downloaded here [link to PDF and text files]

 Dataset description
Data is presented as a single shapefile. It contains the river network and all assessment results obtained with HYDROpot_Integral.

 Changes in the methodology compared to the original method (Hirschi et. al 2013)

 * RS_A11 Ecomorphology: recorded for the whole of Switzerland and zero values equated with NA;
individual cantons such as Zug and St. Gallen have no mapped values according to the modular
concept of the federal government, Valais and Graubünden only the main valleys, Ticino and Fribourg not
completely (BAFU 2009).
 * RS_A14 Renaturation and revitalization data: not centrally available at the time of data collection.
centrally available, therefore values in GR were equated with NA.
 * RS_A15 Dilution ratio at wastewater treatment plants (WWTPs) for discharges: Zero values
equal to NA.
 * RS_A20 Water flow: use WASTA (2013) with hydroelectric power plants (> 300 kW) under
Federal control and dams serving hydroelectricity (Dam, as of 2013).
 * RS_C05 Synoptic hazard maps: are cantonally managed at the time of data collection,
Values in GR are marked with a 5 so that the systematics in the decision tree is not affected.
is affected.
 * Water quality (RS_A15, RS_A16, RS_A17, RS_A18, RS_A19): for the evaluation of the function type.
A Nature, it is important whether the median of the five values is less than or equal to 3 in total. This
evaluation is based on the decision tree for evaluating GR (Hirschi et al. 2013:22).
Therefore, an evaluation of the station data is made where critical and possible river segments
with poor quality (median less than 3) exist. Only two longer and one short
sections in Switzerland receive a lower median than 3 for water quality.
 * SLS_B06 Visibility: For 99 percent of the river segments (30,733 of 31,062) in the canton of
Bern (2015 reduced version), the landscape area is considered to be visible. Due to this high number
of sections, a large number of viewpoints in the layer of Swisstopo and
the computation time and computability in ArcGIS, the landscape area is classified as generally viewable
(equal to 1).
16 Method
Additional indicators were added (see Appendix B.2):
 * SLS_A21 Dissection
 * SLS_A22 Forest areas
 * SLS_B03 Hiking trails
 * SLS_B10 Residential and vacation homes
 * SLS_B11 Tourist infrastructure
 * SLS_C01 Landfill
 * SLS_C03 Infrastructure
 * SLS_C05 Industry
 * SLS_C06 Agricultural land
Not to be added, although present to some extent:
 * SLS_B06 Cultural assets of national importance: here, too, the calculability of the visibility analysis is
for the whole of Switzerland is limited
 * SLS_A15 Legally binding protection and land use planning: the individual river sections are not
clearly designated, i.e. no geodata exist
The following data are also not supplemented, as they are cantonal data:
 * SLS_A10 Cantonal nature reserves
 * SLS_A16 Forest reserves
 * SLS_A17 Cantonal inventories and contractually protected areas

decision-making

display_name: decision-making

ecosystem-protection

display_name: ecosystem-protection

gis

display_name: gis

hydropower

display_name: hydropower

integral-water-management

display_name: integral-water-management

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester


weissfluhjoch-dataset-for-esm-snowmip

maintainer: Nander Wever

title_for_slug: weissfluhjoch-dataset-for-esm-snowmip

en: weissfluhjoch snow-depth snow-models esm-snowmip snow

en: ini file

en: This ini file is required by data-converter from MeteoIO version 1887 (http://models.slf.ch/p/meteoio/)

en: Dataset Weissfluhjoch for ESM-SnowMIP

media_type: application/zip

format: ZIP

mimetype: application/zip

en: Conversion script

media_type: text/x-sh

en:
Use this script to convert WFJ_optimaldataset_v6.smet to wfj.smet, the file that is used for the ESM-SnowMIP project. It also requires the file: WFJ_AirPressure_Data.zip

Use: bash create_wfj_dataset.sh > input/wfj.smet

mimetype: text/x-sh

en: This Weissfluhjoch dataset is a processed version of the Weissfluhjoch dataset version 6 from https://doi.org/10.16904/6. This dataset was specially created for the ESM-SnowMIP project. Here it is documented how this dataset has been created.

esm-snowmip

display_name: esm-snowmip

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-models

display_name: snow-models

weissfluhjoch

display_name: weissfluhjoch

en: Weissfluhjoch dataset for ESM-SnowMIP


maintainer: EnviDat Support

en: outgoing weissfluhjoch shortwave-radiation incoming longwave-radiation

en: Metadata

media_type: application/pdf

format: PDF

mimetype: application/pdf

en: Parameter file

media_type: text/plain

format: TXT

mimetype: text/plain

en: Processing doc

en: DATA ACCESS

en:
Corrected incoming and outgoing shortwave and longwave 2 min radiation measurements at the Weissfluhjoch summit, Davos, CH.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

incoming

display_name: incoming

longwave-radiation

display_name: longwave-radiation

outgoing

display_name: outgoing

shortwave-radiation

display_name: shortwave-radiation

en: ASRB_WFJ: Shortwave and longwave radiation measurements (2 min) at the Weissfluhjoch research site, Davos


en: pinales species-distribution-model species-occurrence species-range-map fagales species-richness

en: Occurrence maps for species of Fagales and Pinales with few records

media_type: ZIP

en: Point_buffer.zip includes 267 occurrence maps of species that do not have enough occurrence data for polygon mapping.

en: Species range maps of species in Fagales and Pinales (with enough occurrences)

en: species_map.zip includes species 1690 range maps generated based on the integrated method described in Lyu et al., (2022). File names with (polygon) indicate that this map is only generated by polygon mapping, as there are not enough occurrences for SDMs.

en:
This database contains 1957 distribution maps of species from Fagales and Pinales constructed based on a method integrating polygon mapping and SDMs (Lyu et al., 2022).
To construct the maps, we first collected occurrence data from 48 different sources. According to the number of occurrences after data cleaning, three kinds of maps are constructed: (1) For species with more than 20 occurrences, we performed SDM and polygon mapping described in Lyu et al. (2022) and select the integration of the two layers as the distribution range; (2) For species with more than 4 but less than 20 occurrences, we only use polygon mapping to draw the distribution range; (3) For species with less than 4 occurrences, a 20-km buffer was generated around the occurrences as the distribution range. The maps were manually checked and evaluated (see Note S3 and Table S9 in Lyu et al., 2022 for details).

fagales

display_name: fagales

pinales

display_name: pinales

species-distribution-model

display_name: species-distribution-model

species-occurrence

display_name: species-occurrence

species-range-map

display_name: species-range-map

species-richness

display_name: species-richness

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Species distribution maps of Fagales and Pinales (GDPlants)


en: raster-processing digital-elevation-model geoinformation-system geodata-processing seilaplan digital-planning cable-yarding swiss-geodata qgis-plugin open-source

en: DHM-Kacheln zusammenfügen

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. In this tutorial video, we show how to merge multiple DTM raster tiles into one file, using the QGIS tool ‘Virtual Raster’. This simplifies the digital planning of a cable line using the QGIS plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to Seilaplan website: https://seilaplan.wsl.ch

***************************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. In diesem Tutorialvideo zeigen wir, wie man mit dem QGIS-Plugin Virtuelles Raster mehrere DHM-Kacheln zu einem einzigen Rasterfile zusammenfügen und abspeichern kann. Für die Seillinienplanung mit Seilaplan muss nun nur noch eine Datei, mein neues virtuelles Raster, ausgewählt werden.

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geodata-processing

display_name: geodata-processing

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

raster-processing

display_name: raster-processing

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Seilaplan Tutorial: Merge DTM tiles


en: biogeography pairwise-stand-comparisons forest-management soil-impacts biodiversity

en: references

media_type: XLS

en: Bibliography of all references cited in data_wohlgemuth_etal_Neobiota_2022.

format: XLS

media_type: CSV

en: Baseline data

format: CSV

en: headers

media_type: ascii, tab separated, also as excel table

en: Description of headers for data_wohlgemuth_etal_Neobiota_2022

en: Compiled data on the impacts of seven important NNTs (Acacia dealbata, Ailanthus altissima, Eucalyptus globulus, Prunus serotina, Pseudotsuga menziesii, Quercus rubra, Robinia pseudoacacia) on physical and chemical soil and biodiversity in Europe, and summarise commonalities and differences. A total of 107 publications considered, studies referred to biodiversity attributes and soil properties: 2804 lines and 30 rows.

biodiversity

display_name: biodiversity

biogeography

display_name: biogeography

forest-management

display_name: forest-management

pairwise-stand-comparisons

display_name: pairwise-stand-comparisons

soil-impacts

display_name: soil-impacts

en: Impact of non-native tree species in Europe on soil properties and biodiversity: a review


maintainer: Avalanche Warning Service SLF

en: Avalanche fatalities per year in Switzerland since 1936/1937

mimetype: text/csv

en:
This dataset contains the statistics on the number of avalanche fatalities per hydrological year in Switzerland. The data set commences with the beginning of the hydrological year 1936/37 on 01/10/1936. After the completion of a hydrological year, the new data is appended to the existing dataset.

The following information is contained (by column and column title):
 - hydrological year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)

The definition for these four categories as described in the guidelines to the avalanche accident database:

**tour**:
activities include back-country ski, snowboard or snow-shoe touring

**offpiste**:
access from ski area, generally from the top of a skilift with short hiking distances

**transportation.corridors** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people travelling or recreating on open or temporarily closed
transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)

**buildings** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people inside or just outside buildings, and workers on high alpine building
sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

education

en: Education and science

en: Number of avalanche fatalities per hydrological year in Switzerland since 1936-1937


en: mountain-forest treeline-ecosystems stillberg foresty afforestation davos

en: Dataset V1

media_type: GDB

en: This dataset has been depricated in favour of an updated version.

format: GDB

en: Documentation

media_type: application/msword

mimetype: application/msword

en: Site photo

media_type: JPEG

en:
#Background Information

A history of many centuries of seasonal livestock grazing of alpine pastures has significantly depressed the treeline in many European mountain ranges. Therefore, observations of treeline patterns are more likely to be obscured by historical land use than in regions with less human influence and might not provide relevant information about environmental factors that influence mortality and growth patterns at the natural high-elevation limit of tree existence. To overcome this, we used a large afforestation experiment in the Swiss Alps, "Stillberg", to address the following questions:

Can trees survive above the current treeline in the European Alps? Are environmental factors that influence spatial patterns of mortality the same as those that influence height growth? Does the relative importance of these environmental variables change over the first 40 years after planting as seedlings?

#Dataset
The 5 ha Stillberg long-term afforestation research area is located near Davos (Central Alps, Switzerland). The bottom of the afforestation is approximately at the current treeline and it covers an altitudinal gradient of more than 150 m (2075 to 2230 m a.s.l.; see picture above). Approximately 92'000 seedlings of three treeline species (Larix decidua, Pinus mugo ssp. uncinata and Pinus cembra) were systematically planted in 1975, and mortality and height growth were closely monitored during the following 40 years.

Publications
Barbeito, I., Dawes, M. A., Rixen, C., Senn, J. and Bebi, P. (2012), Factors driving mortality and growth at treeline: a 30-year experiment of 92 000 conifers. Ecology, 93: 389–401. http://dx.doi.org/10.1890/11-0384.1

afforestation

display_name: afforestation

davos

display_name: davos

foresty

display_name: foresty

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline-ecosystems

display_name: treeline-ecosystems

envidat

en: EnviDat: the Environmental Data Portal

en: Long-term treeline research dataset at Stillberg, Davos


en: antarctica snowmicropen terrestrial-laser-scanning mass-flux drifting-snow meteorological-data

en: README

en: Describes the dataset in detail

en: Dataset

media_type: Link

en: Links to the dataset

en:
This dataset contains the data acquired during the expedition to Princess Elisabeth Antarctica Station in December 2016 and January 2017. The dataset consits of meterorological data, drifting snow mass flux data, SnowMicroPen data and Terrestrial Laser Scanning data.

Please refer to the README for more information about the data.

This dataset is the basis of the following publication:

Sommer, C. G., Wever, N., Fierz, C., and Lehning, M.: Wind-packing of snow in Antarctica, The Cryosphere Discuss., https://doi.org/10.5194/tc-2018-36, in review, 2018.

antarctica

display_name: antarctica

drifting-snow

display_name: drifting-snow

mass-flux

display_name: mass-flux

meteorological-data

display_name: meteorological-data

snowmicropen

display_name: snowmicropen

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Expedition to Princess Elisabeth Antarctica Station, 2016/2017


maintainer: Stephan Zimmermann

en: fagus-orientalis-lipsky magnesium biogeochemical-cycling calcium potassium

en: Concentrations of Ca, Mg, K, and Na in throughfall, litterflow and soil solution of a Hyrcanian forst in Northern Iran

en:
Throughfall, litterflow and soil solution were sampled during one whole year under five Oriental beech trees in a mixed Hyrcanian beech forest. The amounts of Ca2+, Mg2+, K+ and Na+ in these fluxes were calculated based on their concentrations and the sampled volumes, and subsequently compared with the respective fluxes in the rainfall and soil solution of an adjacent forest gap.
In addition six soil profiles, one close to every single tree and one in the forest gap, were analyzed for pH, CaCO3, organic matter and texture.

biogeochemical-cycling

display_name: biogeochemical-cycling

calcium

display_name: calcium

fagus-orientalis-lipsky

display_name: fagus-orientalis-lipsky

magnesium

display_name: magnesium

potassium

display_name: potassium

education

en: Education and science

en: Base cation dynamics in an Oriental beech forest


maintainer: Henning Löwe

en: grain-shape angle-of-repose discrete-element-modelling granular-snow fast-sintering

en: Angle of repose and 3D CT images

en:
5 Snow types were examined and glass beads as a cohesion-less reference, named as follows:

RG: rounded grains (sieved with 0.7 - 1.4 mm)

FC: faceted grains (1.4 - 2 mm)

FCS: small faceted grains (0.7 - 1.4 mm)

IB: ice beads (4 mm)

IBS: small ice beads (2 - 2.2 mm)

GB: glass beads(2 mm)

en:
Angle of repose experiments were performed with different snow types at temperatures between -2 and -40°C. They were used to examine granular snow dynamics on the grain-scale with focus on the role of grain shape and cohesion. The angle of repose was observed by sieving snow onto a round, freestanding base until a stationary heap was formed.

This dataset consists of 1) the images of the experimental heaps that were taken to determine the angle of repose, 2) one binary 3D micro computed tomography image of each snow type. The CT images were taken with the SLF micro-CT40 to characterize snow properties and grain shape.

The experiments with natural snow types (rounded and faceted grains) and spherical model snow allowed for an examination of the differences in granular properties between natural grain shapes and spherical particles in view of Discrete Element Modelling. With the chosen temperatures, the effect of sintering could be observed that increases the angle of repose with increasing temperature.

angle-of-repose

display_name: angle-of-repose

discrete-element-modelling

display_name: discrete-element-modelling

fast-sintering

display_name: fast-sintering

grain-shape

display_name: grain-shape

granular-snow

display_name: granular-snow

en: Angle of repose experiments with natural and spherical snow


mountain-permafrost-hydrology

maintainer: Jeannette Noetzli

title_for_slug: mountain-permafrost-hydrology

en: climate-change-impacts permafrost-degradation ice-rich-permafrost mountain-permafrost-hydrology mass-movements monitoring-techniques

en: Synthesis report chapter of the Hydro-CH2018 project of the Federal Office for the Environment (FOEN)

media_type: PDF

en: DORA Persistent URL

en: This report was prepared as one of the synthesis report chapters of the Hydro-CH2018 project of the Federal Office for the Environment (FOEN). In earlier reports such as the CH2014-IMPACTS report (CH-Impacts 2014), the topic of mountain permafrost hydrology was not addressed. Here, we provide a baseline of the available knowledge of mountain permafrost in the Swiss Alps for future reference. We compile an overview of the current understanding of mountain permafrost in the Swiss Alps, its distribution and characteristics, observed and projected changes, and expected impacts on slope stability, infrastructure and hydrological aspects. We also briefly describe the measurement techniques and modelling approaches applied. The chapter closes with a summary of the most important open research questions. The literature cited mainly includes studies on mountain permafrost published in scientific journals and assessments of long-term observation data. We focus on permafrost hydrology interactions wherever information is available. However, systematic studies on permafrost hydrology in mountain areas are still limited.

climate-change-impacts

display_name: climate-change-impacts

ice-rich-permafrost

display_name: ice-rich-permafrost

mass-movements

display_name: mass-movements

monitoring-techniques

display_name: monitoring-techniques

mountain-permafrost-hydrology

display_name: mountain-permafrost-hydrology

permafrost-degradation

display_name: permafrost-degradation

envidat

en: EnviDat: the Environmental Data Portal

en: Mountain Permafrost Hydrology


en: digital-planning open-source wms-data seilaplan qgis-plugin geoinformation-system digital-elevation-model cable-yarding swiss-geodata

en: View video on youtube!

en: WMS-Layer als Hintergrundkarten laden

en:
In order to digitally plan a cable line using the QGIS plugin ‘Seilaplan’, maps with various background information are helpful. In this tutorial we show you how to obtain maps that are helpful for cable line planning, for example a national map of Switzerland at different scales, the NFI vegetation height model or the NFI forest mix rate. For this we explain what WMS datasets are and how to integrate them into QGIS. No download of large data is needed for this, only a good internet connection. Please note that the tutorial language is German!

Link for the integration of WMS data: https://wms.geo.admin.ch/

Link to the description on the Swisstopo website:
https://www.geo.admin.ch/en/geo-services/geo-services/portrayal-services-web-mapping/web-map-services-wms.html

Link to the Seilaplan website: https://seilaplan.wsl.ch

**************************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung sind verschiedene Hintergrundkarten hilfreich. In diesem Tutorialvideo zeigen wir, was WMS Daten sind und wie man diese in QGIS einbinden kann. Dafür müssen die Daten nicht heruntergeladen werden. Es braucht lediglich eine gute Internetverbindung. Für die Seillinienplanung hilfreiche Karten sind bspw. die Landeskarte der Schweiz in verschiedenen Massstäben, das Vegetationshöhenmodell LFI oder der Waldmischungsgrad LFI.

Link zur Einbindung der WMS Daten: https://wms.geo.admin.ch/

Link zur Beschreibung auf der Swisstopo Webseite: https://www.geo.admin.ch/de/geo-dienstleistungen/geodienste/darstellungsdienste-webmapping-webgis-anwendungen/web-map-services-wms.html

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

wms-data

display_name: wms-data

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Seilaplan Tutorial: Load WMS layers as background maps


maintainer: Jürg Schweizer

en: avalanche-activity avalanche-size snow-avalanche avalanche-forcasting danger-level

en: Readme

en: The Readme file contains the description of the two data files.

en: Avalanche activity data

media_type: text/csv

en: This data file includes data on the avalanche activity per day aggregated from the avalanche data.

en: Snow avalanche data

en: This data file includes data on the avalanches mapped in the region of Davos.

en:
These data include all avalanches that were mapped in the region of Davos, Switzerland during the winters 1998-1999 to 2018-2019 (21 years), in total 13,918 avalanches, and the corresponding forecast danger level valid on the day of avalanche occurrence, 3533 days and danger ratings in total.

This avalanche activity data set was analysed and results published by Schweizer et al. (2020). They found that the
number of avalanches per day strongly increased with increasing danger level, but avalanche size was poorly related to avalanche danger level.

The data are provided in two files: the first includes the avalanche data (13,918 records); the second includes the avalanche activity per day (3533 records).
Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Schweizer, J., Mitterer, C., Techel, F., Stoffel, A. and Reuter, B., 2020. On the relation between avalanche occurrence and avalanche danger level. The Cryosphere, 14, 737-750, https://doi.org/10.5194/tc-14-737-2020.

avalanche-activity

display_name: avalanche-activity

avalanche-forcasting

display_name: avalanche-forcasting

avalanche-size

display_name: avalanche-size

danger-level

display_name: danger-level

snow-avalanche

display_name: snow-avalanche

education

en: Education and science

en: Snow avalanche data Davos, Switzerland, 1999-2019


en: climate precipitation free-climate-data air-temperature climate-layers century timeseries maximum-temperature minimum-temperature

en: CHELSA Technical Documentation

en: As the CHELSA project is continuously expanded, certain new parameters, time scales etc. are not included anymore in the original publication (Karger et al. 2017). We are therefore provide this document as a guideline of the current climatic parameters available and will expand it as new parameters or time periods will become available. Please refer to the version history for changes made in the document.

en: Data Access

media_type: geotiff

format: GeoTIFF

en:
CHELSAcruts is a delta change monthly climate dataset for the years 1901-2016 for mean monthly maximum temperatures, mean monthly minimum temperatures, and monthly precipitation sum. Here we use the delta change method by B-spline interpolation of anomalies (deltas) of the CRU TS 4.01 dataset. Anomalies were interpolated between all CRU TS grid cells and are then added (for temperature variables) or multiplied (in case of precipitation) to high resolution climate data from CHELSA V1.2 (Karger et al. 2017, Scientific Data). This method has the assumption that climate only varies on the scale of the coarser (CRU TS) dataset, and the spatial pattern (from CHELSA) is consistent over time. This is certainly a rather crude assumption, and for time periods for which more accurate data is available CHELSAcruts should be avoided if possible (e.g. use CHELSA V1.2 for 1979-2015). Different to CHELSA V1.2, CHELSAcruts does not take changing wind patterns, or temperature lapse rates into account, but rather expects them to be constant over time, and similar to the long term averages.

CHELSAcruts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

century

display_name: century

climate

display_name: climate

climate-layers

display_name: climate-layers

free-climate-data

display_name: free-climate-data

maximum-temperature

display_name: maximum-temperature

minimum-temperature

display_name: minimum-temperature

precipitation

display_name: precipitation

timeseries

display_name: timeseries

envidat

en: EnviDat: the Environmental Data Portal

en: CHELSAcruts -  High resolution temperature and precipitation timeseries for the 20th century and beyond


maintainer: Sebastian Schlögl

en: snow turbulent-sensible-heat-fluxes atmosphere atmospheric-turbulence stable-boundary-layer

en: Turbulence data GR00

en: sensor in 1 m height

en: Turbulence data WFJ11

en: Turbulence data WFJ07

en: lower sensor

en: Turbulence data AA00

en: Turbulence data PM07

en: NWW

en: sensor in 0.2 m height

en: SEE

en: sensor in 2 m height

en: sensor in 25 m height

en: upper sensor

en:
We used five different atmospheric turbulence datasets from four test sites, with these sites showing differences in their topographical characteristics. We chose one typical alpine test site with high topographical complexity (Weissfluhjoch, Davos, Switzerland) and three test sites consisting of one glacier site (Plaine Morte, Crans-Montana, Switzerland) and two polar sites (Greenland and Antarctica) representing a quasi-ideal site with homogeneous surface and quasi infinite fetch in all directions.
The turbulent sensible heat flux was calculated using the eddy-covariance method. Note that the sonic temperature fluctuations have been converted into virtual temperature fluctuations.
Three-dimensional wind velocity and air temperature were processed using a linear detrending (Rannik and Vesala, 1999) and a planar fit approach (Massmann and Lee, 2002) to rotate the coordinate system. Air temperature, relative humidity and air pressure from weather stations were used to calculate air properties, which are required for the data processing. The weather stations are located in the immediate vicinity of the turbulence tower and are affected by the same air masses. Turbulence data were averaged to 30-min intervals, whilst changing to a 15-min time interval marginally affects the heat fluxes at the Weissfluhjoch test site (Mott et al., 2011). Note that we define a negative sensible heat flux as being directed towards the snow surface and a positive sensible heat flux as being directed upwards.
The selected datasets and corresponding test sites are briefly introduced below:

Weissfluhjoch 2007 (WFJ07): A vertical set-up of two three-dimensional ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) was used at the traditional field site Weissfluhjoch (2540 m asl.) to measure three-dimensional wind velocity and air temperature at a frequency of 20 Hz. The sensors were mounted 3 m and 5 m above the ground and provided reliable data for 50 days between 11 February 2007 and 24 April 2007. Further information on the field campaign can be found in Stössel et al. (2010) and Mott et al. (2011).

Weissfluhjoch 2011-13 (WFJ11): Three-dimensional wind velocity and air temperature were recorded at 5 m above the ground at a frequency of 10 Hz with a three-dimensional ultrasonic anemometer (CSAT3). The analysis was conducted for data obtained between February and March in the years 2011-13.

Plaine Morte 2007 (PM07): Two three-dimensional ultrasonic anemometers (CSAT3) were installed on a horizontal boom facing opposite directions (west-north-west vs. east-south-east) at 3.75 m above the ground to measure air temperature and three-dimensional wind velocity at 20 Hz. The data were collected at the almost flat field site on the Plaine Morte glacier (2750 m asl.) near Crans-Montana, Switzerland from February to April 2007. High quality meteorological data were additionally recorded and used to force the model. A detailed description about the set-up at the Plaine Morte glacier can be found in Huwald et al. (2009) and Bou-Zeid et al. (2010).

Greenland 2000 (GR00): High-frequency three-dimensional ultrasonic anemometer measurements (CSAT3) were recorded at 50 Hz at the Summit Camp (72.3 °N, 38.8 °W, 3208 m asl.) located on the northern dome of the Greenland ice sheet. Data were collected at 1 m and 2 m above the snow surface during summer in 2000 and 2001. Additionally, meteorological measurements were obtained for the post processing and used to force the model. More information about the field campaign can be found in Cullen et al. (2007, 2014).

Antarctica 2000 (AA00): A set-up of three vertical three-dimensional ultrasonic anemometers (DA-600, Kaijo Denki) were installed at Mizuho Station (70°42' S, 44°20' E, 2230 m asl.) in Eastern Antarctica at 0.2, 1 and 25 m and recorded turbulence data at a frequency of 100 Hz from October to November 2000. Longwave and shortwave radiation, relative humidity, air and snow surface temperature were additionally measured and used to force the model. More information about the field campaign can be found in Nishimura and Nemoto (2005).

atmosphere

display_name: atmosphere

atmospheric-turbulence

display_name: atmospheric-turbulence

snow

display_name: snow

stable-boundary-layer

display_name: stable-boundary-layer

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: How do stability corrections perform in the stable boundary layer over snow?


en: urban-ecology electrodermal-activity sense-of-place landscape place-attachment

en: 04. Scripts

en: 02. Questionnaire Data

en: 01. EDA Processed Data

en: 00. EDA Raw Data

en: 03. Publication Ready Data

en: 05. Visuals

en: This repository contains data on EDA measurements of visitors with different cultural backgrounds in virtual urban park settings. The parks are a Persian garden (Shiraz, Iran) and a historical park in Zurich, Switzerland. The cultural background of the visitors is Persian and Central European. The repository contains raw data from EDA, processed time series and statistical procedures.

electrodermal-activity

display_name: electrodermal-activity

landscape

display_name: landscape

place-attachment

display_name: place-attachment

sense-of-place

display_name: sense-of-place

urban-ecology

display_name: urban-ecology

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Electrodermal Activity (EDA) of Bi-cultural Visitors In Virtual Park Settings


vegetation-height-model-nfi

maintainer: Christian Ginzler

title_for_slug: vegetation-height-model-nfi

en: photogrammety 3d point-cloud forest vegetation-height-model

en: 2016 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2016' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2011 to 2016.

en: 2015 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2015' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2010 to 2015.

en: Countrywide Stereo-Image Matching for Updating Digital Surface Models in the Framework of the Swiss National Forest Inventory

en: Thumbnail

media_type: image/jpeg

mimetype: image/jpeg

en: 2012 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2012' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2007 to 2012.

en: 2019 Vegetation Height Model NFI (current)

en:
Data 'Vegetation Height Model NFI 2019' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2013 to 2019.

en:
A national vegetation height model was calculated for Switzerland using digital aerial images.
We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution
(1 × 1 m and 0.5 x 0.5 m). The DSM was then normalized to obtain the actual
vegetation heights using a digital terrain model (DTM)
based on laser data with the buildings masked out, and to
produce a vegetation height model (VHM). Such a model
will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very
high level of detail. For covering the whole of Switzerland,
we use summer aerial images from six years.

Latest version is from 2019.

forest

display_name: forest

photogrammety

display_name: photogrammety

point-cloud

display_name: point-cloud

vegetation-height-model

display_name: vegetation-height-model

en: Vegetation Height Model NFI


maintainer: Sven-Eric Hopf

en: monitoring ash-dieback iap fraxinus forest

en: Monitoring of ash trees as part of the Intercantonal Forest Observation Programme

media_type: .pdf

en: Packgroun information on data for the publication: Spread and Severity of Ash Dieback in Switzerland – Tree Characteristics and Landscape Features Explain Varying Mortality Probability, (Klesse et al. 2021, Front. For. Glob. Change 4:645920., doi: 10.3389/ffgc.2021.645920)

en:
In 2013, the Institute for Applied Plant Biology (IAP) started a monitoring programme to study the development and the spatial variation of the ash dieback disease with the aim to find some partially resistant European ash trees (Fraxinus excelsior).
We collaborate as co-authors for the publication: Spread and Severity of Ash Dieback in Switzerland - Tree Characteristics and Landscape Features Explain Varying Mortality Probability (Klesse et al. 2021 in frontiers)

ash-dieback

display_name: ash-dieback

fraxinus

display_name: fraxinus

iap

display_name: iap

monitoring

display_name: monitoring

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Giulia Mazzotti

en: forest-snow snow-energy-balance forest-structure snow-modelling snow-distribution

en: Coordinates data

en: Includes coordinate information of each surveyed point (7 x 276 = 1932 forest points, 2 open areas)

en: Grid point nomenclature

en: The grid structure of each forest site and the respective nomenclature applied to label individual points within each grid are outlined here.  Each point marks the location of snow depth measurements and co-located canopy structure parameters.

en: Snow depth data forest sites

en: Contains all snow depth data acquired at all forest sites during winters 2012/13, 2013714 and 2014/15.

en: Meteo data to drive FSM2 model

media_type: application/zip

en: Includes meteorological driving data used to run the forest snow model FSM2, processed and parsed in text files that match the format required by FSM2. Separate files are available for each field area (Laret, Drusatscha and Ischlag) and season (2012/13, 2013/14, 2014/15). Each file includes data for the period from October 1st to May 31st at hourly resolution.

en: Snow depth data open sites

en: Contains all snow detph data accquired at open sites nearby the forest stands during the same period.

en: Canopy data

en: Includes all canopy structure metrics computed at all surveyed locations

en:
This dataset contains all snow, canopy and meteorological data presented and used in the publication: Mazzotti, G., Essery, R., Moeser, D. & Jonas T. (2020) 'Resolving spatial variability of forest snow using an energy-balance model with a 1-layer canopy'. Water Resources Research, https://doi.org/10.1029/2019WR026129.
This publication must be cited when using this dataset.

forest-snow

display_name: forest-snow

forest-structure

display_name: forest-structure

snow-distribution

display_name: snow-distribution

snow-energy-balance

display_name: snow-energy-balance

snow-modelling

display_name: snow-modelling

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Snow depth, canopy structure and meterorological datasets from the Davos area, Switzerland, Winters 2012/13-2014/15, used for high-resolution forest snow modelling


maintainer: Anita Risch

en: grazing grassland ecosystem-functions ecosystem-multifunctionality vertebrates subalpine invertebrates swiss-national-park exclusion ecosystem-coupling

en: Datafile

en:
ID: Plot ID composited of Fence & Treatment number (90 plots total)

Grassland: Name of the six subalpine grasslands where the exclosure setups were erected. In large grasslands (GRIM, MING, STAB), we established four hierarchical exclosure setups (two in short- and two in tall-grass vegetation), whereas in the small grasslands (BOTS, DADA, MARG) only one setup was erected per vegetation type. BOTS = Val dal Botsch, GRIM = Grimmels, MING = Val Mingér, STAB = Alp Stabelchod, DADA = Stabelchod da daint, MARG = Margunet

Fence: Number of exclosure setup (1 - 18). Note that uneven numbers (1,3,5,7,9,11,13,15,17) represent setups established on short-grass vegetation, even numbers (2,4,6,8,10,12,14,16,18) setups established in tall-grass vegetation
Vegetation	Vegetation type, 1 = short-grass vegetation, 2 = tall-grass vegetation; (9 replicate fences on each vegetation type)
Treatment	Progressive animal exclusion, numbers indicate which animals had access to the plot: 1 = Large/medium/small mammals, and invertebrates have access ("L/M/S/I"), 2 = Medium/small mammals, and invertebrates have access (“M/S/I”), 3 = Small mammals and invertebrates have access (“S/I”), 4 = Invertebrates have access (“I”), 5 = No animals have access (“None”)

Bulkden:	Fine fraction soil bulk density (g cm-3)

Soil.moist	: Soil moisture (%)

Soil.org.C: Rhizosphere soil C content (%)

pH: Soil pH

Nema.PC1: First principal component (PC1) of principal component analysis (PCA) of the soil nematode community composition

Nema.PC2: Second principal component (PC2) of principal component analysis (PCA) of the soil nematode community composition

Micro.PC1: 	First principal component (PC1) of principal component analysis (PCA) of the soil microbial community composition

Micro.PC2: Second principal component (PC2) of principal component analysis (PCA) of the soil microbial community composition

Abv.Inv.PC1: First principal component (PC1) of principal component analysis (PCA) of the aboveground-dwelling invertebrate community composition

Abv.Inv.PC2: Second principal component (PC2) of principal component analysis (PCA) of the aboveground-dwelling invertebrate community composition

Arthr.PC1: First principal component (PC1) of principal component analysis (PCA) of the soil arthropod community composition

Arthr.PC2: Second principal component (PC2) of principal component analysis (PCA) of the soil arthropod community composition

Plant.PC1: First principal component (PC1) of principal component analysis (PCA) of the plant community composition

Plant.PC2: Second principal component (PC2) of principal component analysis (PCA) of the plant community composition

Root.biomass: Root biomass (g m-2)

Micro.biomass	: Microbial biomass carbon (mg kg-1)

Plant.richness: Plant species richness

Plant.N: Plant tissue nitrogen content (%)

Soil.N.min: Soil net nitrogen mineralisation (kg ha-1 season)

Soil.resp: Soil carbon dioxide emissions (soil respiration; g m-2 h-1)

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:
 > Risch AC, Ochoa-Hueso R, van der Putten WH, Bump JK, Busse MD, Frey B, Gwiazdowicz DJ, Page-Dumroese DS, Vandegehuchte ML, Zimmermann S, Schütz M. Size-dependent loss of aboveground animals differentially affects grassland ecosystem coupling and functions. 2018. Nature Communications 9: 3684. [doi: 10.1038/s41467-018-06105-4](https://doi.org/10.1038/s41467-018-06105-4).

Please cite this paper together with the citation for the datafile.

#Methods
Study sites
The experimental exclosure setups were installed within the SNP (IUCN category Ia preserve; Dudley 2008), in south-eastern Switzerland. The park covers 172 km2 of forests and subalpine and alpine grasslands along with scattered rock outcrops and scree slopes. The entire area has been protected from human impact (no hunting, fishing, camping or off-trail hiking) since 1914. Large, fairly homogenous patches of short- and tall-grass vegetation, which originate from different historical management and grazing regimes, cover the park’s subalpine grasslands entirely. Short-grass vegetation developed in areas where cattle used to rest (nutrient input) prior to the park’s foundation (14th century to 1914) (Schütz and others 2003, 2006) and is dominated by lawn grass species such as Festuca rubra L., Briza media L. and Agrostis capillaris L. (Schütz and others 2003, 2006). Today, this vegetation type is intensively grazed by diverse vertebrate and invertebrate communities that inhabit the park and consume up to 60% of the available biomass (Risch and others 2013). Tall-grass vegetation developed where cattle formerly grazed, but did not rest, and is dominated by rather nutrient-poor tussocks of Carex sempervirens Vill. and Nardus stricta L. (Schütz and others 2003, 2006). This vegetation type receives considerably less grazing, with only roughly 20% of the biomass consumed (Risch and others 2013). Consequently, the two vegetation types together represent a long-term trajectory of changes in grazing regimes. Underlying bedrock of all grasslands is dolomite, which renders these grasslands rather poor in nutrients regardless of former and current land-use regimes.
Experimental design
To progressively exclude aboveground vertebrate and invertebrate animals, we established 18 size-selective exclosure setups (nine in short-grass, nine in tall-grass vegetation) distributed over six subalpine grasslands across the SNP (Risch and others 2013, 2015). Elevation differences of exclosure locations did not exceed 350 m (between 1975 and 2300 m a.s.l.). The exclosures were established immediately after snowmelt in spring 2009 and were left in place for five consecutive growing seasons (until end of 2013). They were, however, temporarily dismantled every fall (late October after first snowfall) to protect them from avalanches. They were re-established in the same location every spring immediately after snowmelt. Each size-selective exclosure setup consisted of five plots (2 x 3 m) that progressively excluded aboveground vertebrates and invertebrates from large to small. The plots are labelled according to the guilds that had access to them “L/M/S/I”, “M/S/I”, “S/I”, “I”, “None”; L = large mammals, M = medium mammals, S = small mammals, I = invertebrates, None = no animals had access. As we only had permission to have the experimental setup in place for five consecutive growing seasons, the experiment had to be completely dismantled in the late fall of 2013 and all material removed from the SNP.
Our exclosure design was aimed at excluding mammalian herbivores, but naturally also excluded the few medium and small mammalian predators, as well as the entire aboveground invertebrate food web. A total of 26 large to small mammal species can be found in the SNP, but large apex predators are missing (wolf, bear, lynx) . Reptiles, amphibians and birds are scarce to absent in the subalpine grasslands under study. Only two reptile species occur in the park and they are confined to rocky areas that warm up enough for them to survive. One frog species spawns in an isolated pond far from our grasslands. Only three bird species occasionally feed on the subalpine grasslands. Using game cameras (Moultrie 6MP Game Spy I-60 Infrared Digital Game Camera, Moultrie Feeders, Alabaster, AL, USA), we did observe that the medium- and small-sized mammals (marmot/hares and mice) were not afraid to enter the fences and feed on their designated plots. We never spotted reptiles, amphibians or birds on camera. We distinguished between 59 higher aboveground-dwelling invertebrate taxa that our size-selective exclosures excluded (see also methods for aboveground-dwelling invertebrates below).
The “L/M/S/I” plot (not fenced) was located at least 5 m from the 2.1 m tall and 7 x 9 m large main electrical fence that enclosed the other four plots. The bottom wire of this fence was mounted at 0.5 m height and was not electrified to enable safe access for medium and small mammals, while fencing out the large ones. Within each main fence, we randomly established four 2 x 3 m plots separated by 1-m wide walkways from one another and from the main fence line: 1) the “M/S/I” plots were unfenced, allowing access to all but the large mammals; 2) the “S/I” plots (10 x 10 cm electrical mesh fence) excluded all medium-sized mammals. Note that the bottom 10 cm of this fence remained non-electrified to enable safe access for small mammals; 3) the “I” plots (2 x 2 cm metal mesh fence) excluded all mammals. We double-folded the mesh at the bottom 50 cm to reduce the mesh size to smaller than 1 x 1 cm openings; and 4) the “None” plots were surrounded by a 1 m tall mosquito net (1.5 x 2 mm) to exclude all animals. The top of the plot was covered with a mosquito-meshed wooden frame mounted to the corner posts (roof). We treated these plots a few times with biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) to remove insects that might have entered during data collection or that hatched from the soil, but amounts were negligible and did not impact soil moisture conditions within these plots.
To assess whether the design of the “None” exclosure (mesh and roof) affected the response variables within the plots and, therefore, influenced the results, we established an additional six “micro-climate control” exclosures (one in each of the six grasslands) (Risch and others 2013, 2015). These exclosures were built as the “None” exclosures but were open at the bottom (20 cm) of the 3-m side of the fence facing away from the prevailing wind direction to allow invertebrates to enter. A 20-cm high and 3-m long strip of metal mesh was used to block access to small mammals. Thus, this construction allowed a comparable micro-climate to the “None” plots, but also a comparable feeding pressure by invertebrates to the “I” plots. We compared various properties within these exclosures against one another to assess if our construction altered the conditions in the “None” plots. We showed that differences in plant (e.g., vegetation height, aboveground biomass) and soil properties (e.g., soil temperature, moisture) found between the “I” and the “None” treatments were not due to the construction of the “None” exclosure, but a function of animal exclusions, although the amount of UV light reaching the plant canopy was significantly reduced (Risch and others 2013).
Aboveground invertebrate sampling
Aboveground invertebrates were sampled with two different methods to capture both ground- and plant-dwelling organisms: 1) we randomly placed two pitfall traps (67 mm in diameter, covered with a roof) filled with 20% propylene glycol in one 1 x 1 m subplot of the 2 x 3 m treatment plots in spring 2013 (May) and emptied them every two weeks until late September 2013 (Vandegehuchte and others 2017b, 2018). A pitfall trap consisted of a plastic cylinder (13 cm depth, 6.75 cm diameter). Within each cylinder we placed a 100 ml plastic vial with outer diameter 6.70 cm and on top of the cylinder we placed a plastic funnel to guide the invertebrates into the vials. Each trap was cover with a cone-shaped and transparent plastic roof to protect the trap from rain (Vandegehuchte and others 2017b, 2018). Note that in the “None” plots only one trap was placed as control to check for effectiveness of the exclosure. 2) We vacuumed all invertebrates from a 60 x 60 cm area on another 1 x 1 m subplot with a suction sampler (Vortis, Burkhard manufacturing CO, Ltd., Rickmansworth, Hertfordshire, UK) every month from June to September 2013 (Vandegehuchte and others 2017b, 2018). For this purpose, we quickly placed a square plastic frame (60 x 60 x 40 cm) with a closable mosquito mesh sleeve attached to the top edge into the plot from the outside. The suction sample was then inserted into through the sleeve and operated for 45 s to collect the invertebrates (Vandegehuchte and others 2017b, 2018).
We sorted the ≈100 000 individuals collected with both methods by hand and identified each individual morphologically to the lowest taxonomic level feasible (59 taxa, including orders, suborders, subfamilies, families; phylum for Mollusca). These taxa belonged to the following feeding types: 19 herbivores, 16 detritivores, 9 predators, 8 mixed feeders, 5 omnivores and 2 non-classified feeders (or not feeding as adults) (Vandegehuchte and others 2017b). We summed the numbers from the two pitfall traps and the suction sampling over the course of the 2013 season to represent the aboveground invertebrate abundance and community composition of a plot. Note: we did not specifically attempt to catch flying invertebrates with e.g., sticky traps, thus a few flying insects may have been missed with our vacuum sampling approach.
Sampling of plant properties
The vascular plant species composition was assessed at peak biomass every summer (July) by estimating the frequency of occurrence of each species with the pin count method in each plot (Frank and McNaughton 1990). A total of 172 taxa occurred within our 90 plots and we calculated plant species richness for each plot separately. We used the 2013 data in this study. Plant quality was assessed every year in July and September; here we use plant quality at the end of the experiment (September 2013). Two 10 x 100 cm wide strips of vegetation per plot were clipped, combined, dried at 65°C, and ground (Pulverisette 16, Fritsch, Idar-Oberstein, Germany) to pass through a 0.5 mm sieve. Twenty randomly selected samples across all treatments were analysed for N (Leco TruSpec Analyser, Leco, St. Joseph, Michigan, USA) (Vandegehuchte and others 2015). Nitrogen concentrations of the other samples were then estimated from models established for the experiment and the entire SNP relating Fourier transform-near infrared reflectance (FT-NIR) spectra to the measured values of N using a multi-purpose FT-NIR spectrometer (Bruker Optics, Fällanden, Switzerland) (Vandegehuchte and others 2015). Root biomass was sampled every fall by collecting five 2.2 cm diameter x 10 cm deep soil samples (Giddings Machine Company, Windsor, CO, USA) per plot (450 samples year-1). The samples were dried at 30 °C and roots were sorted from the sample by hand. We sorted each sample for 1 h which allowed to retrieve over 90% of all roots present in the samples (Risch and others 2013). The roots were then dried at 65 °C for 48 and weighed to the nearest mg. We averaged the values per plot and used the 2013 data only in this study.
Sampling of edaphic communities
In 2009, 2010, and 2011 we collected three composited soil samples (5 cm diameter x 10 cm depth; AMS Samplers, American Falls, ID, USA) and assessed bacterial community structure using T-RFLP profiling (Liu and others 1997; Blackwood and others 2003; Hodel and others 2014). We detected a total of 89 operational taxonomic units (OTUs). These values are in accordance with other studies reporting OTU richness (Wirthner and others 2011; Zumsteg and others 2012; Meola and others 2014) using T-RFLP profiling, a method that detects the most abundant, and thus likely, the most relevant, taxa. We averaged the data over the three years of collections for our calculations. Microbial biomass carbon (MBC) was determined with the substrate-induced method (Anderson and Domsch 1978) every fall (September) between 2009 and 2013 by collecting three mineral soil samples (5 cm diameter × 10 cm mineral soil core, AMS Samplers, American Falls, ID, USA). The three samples were combined (90 samples for each sampling year), immediately put on ice, taken to the laboratory, passed through a 2-mm sieve and stored at 4°C. Again, we only used the 2013 data in this study.
Soil samples (5 cm diameter x 10 cm depth) to extract soil arthropods were collected in June, July, and August 2011 with a soil corer lined with a plastic sleeve to ensure an undisturbed sample (total of 270 samples). The plastic line core was immediately sealed on both ends using cling film and put into a cooler. All plots were sampled within three days and the extraction of arthropods started the evening of the sampling day using a high-gradient Tullgren funnel apparatus (Crossley and Blair 1991; Vandegehuchte and others 2015). Samples were kept in the extractor for four days and the soil arthropods were collected in 95% ethanol. All individuals were counted and each individual was identified morphologically to the lowest level feasible [76 taxa, including orders, suborders, subfamilies, families (Protura, Thysanoptera, Aphidina, Psylina, Coleoptera, Brachycera, Nematocera, Auchenorryncha, Heteroptera, Formicidae); sub-phylum for Myriapoda, for Acari and Collembola also including morpho-species). Note that we also included larval stages (nine of the 76 taxa) (Vandegehuchte and others 2015). All data were summed over the season. A detailed species list for mites and collembolans is published (Vandegehuchte and others 2017a) [https://doi.org/10.1371/journal.pone.0118679.s001]. Earthworms are rare in the SNP and therefore were not included. We collected eight random 2.2 cm diameter x 10 cm deep soil cores from each plot in September 2013 to determine the soil nematode community composition. The samples were mixed and the nematodes were extracted from 100 ml of fresh soil using Oostenbrink elutriators (Oostenbrink 1960). All nematodes in a 1 ml of the 10 ml extract were counted, a minimum of 150 individuals sample-1 were identified to genus or family level using (Bongers 1988), the numbers of all nematodes were extrapolated to the entire sample and expressed for a 100 g dry sample. In total we identified 63 genus or family levels (Vandegehuchte and others 2015). The list of all the nematodes found is published (Vandegehuchte and others 2015) [http://www.oikosjournal.org/appendix/oik-03341] or DOI: [doi: 10.1111/oik.03341].
We are aware that sampling soil microbes from 2009 to 2011 and soil arthropods in 2011 was not ideal, but we are positive that this does not bias the results. Most of the parameters measured in our experiment either already showed a treatment response after the first growing season (e.g., plant biomass) or did not respond over the entire time experiment (e.g., microbial biomass C). The microbial community composition (2009 – 2011) was highly influenced by inter-annual differences in temperature and precipitation, but did not differ between treatments or vegetation types (Hodel and others 2014). We therefore felt comfortable using the 2009 through 2011 data for describing the soil microbial community in our experimental treatments. Similarly, we are positive that our soil arthropod data are representative. We did assess soil arthropods in August 2012 and found no differences to the August 2011 data. However, we did not feel comfortable combining the 2011 June, July, August data with only August data for 2012 for our analyses.
Sampling of soil properties
We collected three soil samples (5 cm diameter x 10 cm depth) in each plot in September 2013 after removing the vegetation. First, we collected the top layer of mineral soil rich in organic matter, the surface organic layer or rhizosphere, typically 1 to 3 cm in depth with a soil corer (AMS Samples, American Falls, Idaho, USA). Second, we collected a 10 cm mineral soil core beneath this surface layer. The cores for each layer were composited, dried at 65 °C for 48 h and fine-ground to pass a 0.5 mm screen. We then analysed all samples for total C using a Leco TruSpec Analyser (Leco, St. Joseph, Michigan, USA). Mineral soil pH was measured potentiometrically in 1:2 soil:CaCl2 solution with an equilibration time of 30 min.
Soil net N mineralisation was assessed during the 2013 growing season (Risch and others 2015). For this purpose, we randomly collected a 5 cm diameter x10 cm deep soil sample with a soil corer (AMS Samples, American Falls, Idaho, USA) after clipping the vegetation in June 2013. After weighing and sieving (4 mm mesh) the soil, we extracted a 20 g subsample in 1 mol l-1 KCl for 1.5 h on an end-over-end shaker and thereafter filtered it through ashless folded filter paper (DF 5895 150, ALBET LabScience, Hahnenmühle FineArt GmbH, Dassel, Germany). From these filtrates NO3- concentrations were measured colorimetrically (Norman and Stucki 1981) and NH4+with flow injection analysis (FIAS 300, Perkin Elmer, Waltham Massachusetts, USA) (Risch and others 2015). We dried the rest of the sample 105 °C to constant mass to determine fine,fraction bulk density. A second soil sample was collected within each plot in June 2013 with a corer lined with a 5 x 13 cm aluminium cylinder. The corer was driven 11.5 cm deep into the soil so that the top 1.5 cm of the cylinder remained empty. Into this space we placed a polyester bag (250 µm) filled an ion-exchanger resin to capture the incoming N. The bag was filled with a 1:1 mixture of acidic and alkaline exchanger resin (ion-exchanger I KA/ion exchanger IIIAA, Merck AG, Darmstadt, Germany). We then removed 1.5 cm soil at the bottom of the cylinder and placed a second resin exchanger bag into this space to capture the N leached from the soil column. To assure that the exchange resin was saturated with H+ and Cl- prior to filling the bags, the mixture was stirred with 1.2 ml l-1 HCl for 1 h and then rinsed with demineralized water until the electrical conductivity of the water reached 5 µm cm-1. The cylinder with the resin bags in place was reinserted into the soil with the top flush to the soil surface and incubated for three months. We recollected the cylinders in September 2013. Each resin bag and 20 g of sieved soil (4 mm mesh) from each cylinder were then separately extracted with KCl and NO3- and NH4+ concentrations were measured. Nitrate and NH4+ concentrations of all samples were then converted to a content basis by multiplying their values with fine fraction bulk density. Net N mineralisation was thereafter calculated as the difference between the N content of the samples collected at the end of the three-month incubation (including the N extracted from the bottom resin bag) and the N content at the beginning of the incubation (Risch and others 2015).
Soil CO2 emissions were measured every two weeks between 0900 and 1700 hrs from early May through late September 2013 with a PP-Systems SRC-1 soil respiration chamber (15 cm high, 10 cm diameter; closed circuit) attached to a PP-Systems EGM-4 infrared gas analyser (PP-Systems, Amesbury, MA, USA) on two locations per plot (Risch and others 2013). The chamber was placed on randomly placed, permanently installed PVC collars (10 cm diameter) driven 5 cm into the soil at the beginning of the study (Risch and others 2013). Freshly germinated plants growing within the collars were removed prior to each measurement to avoid measuring plant respiration or photosynthesis. The two measurements collected per plot and sampling date were averaged.
Soil moisture (with time domain reflectometry; Field-Scout TDR-100, Spectrum Technologies, Plainfield, Illionois, USA) and temperature (with a waterproof digital pocket thermometer; Barnstead International, Dubuque, Iowa, USA) were measured at five random locations per plot every two weeks during the growing seasons during the experiment for the 0 to 10 cm depth (Risch and others 2013, 2015). As soil moisture and soil temperature were highly negatively correlated (Risch and others 2013), we only used soil moisture for this study. We used plot-level averages of all values available to capture soil moisture variability during the five years of the experiment. The results remained unchanged when we only used soil moisture from the 2013 growing season.
Numeral calculations and statistical analyses
Ecosystem coupling. We conducted principal component analyses (PCAs; unscaled) at the complete dataset level using the abundances of each taxonomical entity to describe each of the five different communities used in this study: aboveground-dwelling invertebrates, vascular plants, soil microorganisms, soil arthropods and soil nematodes. We retained the first two components (PCA axis 1 and PCA axis 2) of each analysis as we found them to adequately represent the temporal and spatial variability of our 90 treatment plots in previous studies55,67. Together they explained a total of 71.70% of the variation for aboveground invertebrates, 44.36% for plants, 44.85% for soil microorganisms, 61.85% for soil arthropods and 77.19% for soil nematodes. In addition, we used soil pH and soil organic C content as a proxy for soil chemical properties, soil bulk density as a proxy for soil physical properties and soil moisture (negatively correlated with soil temperature) as a proxy for soil micro-climatic conditions for an overall total of fourteen constituents.
We calculated ecosystem coupling9 for each exclosure treatment within each vegetation type (i.e., 2  5 treatment combinations in total) as an integrated measure of pairwise ecological interactions between ecosystem constituents representing ecological communities and the soil abiotic environment. These ecological interactions are defined by non-parametric Spearman rank correlation analyses between two constituents, excluding interactions involving two abiotic constituents (e.g., soil pH vs. soil moisture) and interactions between the first (PC1) and second (PC2) component of each community type, as these are orthogonal by definition. Interactions between abiotic constituents were excluded from the analyses because the focus of our study was on communities and how they interact with one another and their surrounding environment; therefore, including abiotic-abiotic interactions was not of interest here. Given that the effectiveness of our experimental design resulted in that no community composition data of aboveground-dwelling invertebrates was available for the “None” plots (all animals excluded), only thirteen instead of fourteen constituents were included in the ecosystem coupling calculations for this treatment. The complete absence of aboveground invertebrates represents the most extreme case of disturbance between aboveground animal communities and the rest of the ecosystem constituents. This may have resulted in a slight overestimation of ecosystem coupling for these plots.
	Average ecosystem coupling was calculated as follows:
Ecosystem coupling=
where Xi is the absolute Coupling was calculated value of the Spearman’s rho coefficient of the ith correlation for each treatment within each vegetation type (i.e., based on nine replicates each), considering and n is the number of pairwise comparisons considered (n = a total of 80; interactions (56 in the case of the “None” treatment). We considered a total of 40 biotic-biotic interactions (i.e., concerning two community-level principal components such as plants and microbes; 24 in the case of the “None” treatment) and 40 abiotic-biotic (i.e., concerning one community-level principal component and one abiotic factor, e.g., plant community and soil properties; 32 in the case of the “None” treatment).	Coupling was calculated for each treatment within each vegetation type (i.e., based on nine replicates each), considering a total of 80 interactions (56 in the case of the “None” treatment). We considered a total of 40 biotic-biotic interactions (i.e., concerning two community-level principal components such as plants and microbes; 24 in the case of the “None” treatment) and 40 abiotic-biotic (i.e., concerning one community-level principal component and one abiotic factor, e.g., plant community and soil properties; 32 in the case of the “None” treatment).
To establish whether constituents were significantly and positively coupled within treatments (i.e., the average of their correlation coefficients were greater than in a null model where correlation only happens by chance), we calculated one-tailed p-values based on permutation tests with 999 permutations.

We considered six ecosystem functions and process rates commonly used to assess ecosystem functioning (Meyer and others 2015; Manning and others 2018). Plant N content represents a measure of forage quality, while plant richness has been shown to stabilise biomass production, thus allowing the system to respond to changes in herbivory. Soil net N mineralisation, soil respiration, root biomass, and microbial biomass represent fluxes or stocks of energy. For all functions and processes higher values represent higher functioning (Manning and others 2018). All these variables were measured in the last year of the experiment (2013). We then quantified ecosystem multifunctionality using the multiple threshold approach (Byrnes and others 2014; Manning and others 2018), which considers the number of functions that are above a certain threshold, over a series of threshold values (typically 10-99%) that are defined based on the maximum value of each function. We weighted all our functions equally for these calculations (Manning and others 2018). The number of functions in a plot with values higher than a given threshold value for the respective function is summed up. The sum represents ecosystem multifunctionality for that plot. Given that choosing any particular threshold as a measure of ecosystem multifunctionality is arbitrary, we calculated the average of thresholds from 10-90% (in 10% intervals) as a more integrated representation of ecosystem multifunctionality.
We used Pearson correlations to explore the relationships between ecosystem coupling (all interactions, biotic-biotic interactions, abiotic-biotic interactions involving above- and belowground constituents, and all interactions, biotic-biotic interactions, abiotic-biotic interactions involving belowground constituents only) and ecosystem multifunctionality by calculating the slopes of all relationships between ecosystem coupling and multifunctionality for all thresholds between 10 and 99%. We also related ecosystem coupling with the average of multifunctionality at thresholds between 30-80% as explained before and considered this correlation as a robust indication of the type of association between these two variables. In addition, we explored the relationships between ecosystem coupling (all interactions, biotic-biotic interactions, abiotic-biotic interactions involving above- and belowground constituents, and all interactions, biotic-biotic interactions, abiotic-biotic interactions involving belowground constituents only) and individual ecosystem functions. The effects of exclosures and vegetation type on individual functions and multifunctionality were evaluated using linear mixed effects models ('lme' function of the nlme package), with exclosure and vegetation type as fixed effects and fence as a random factor. All statistical analyses and numerical calculations were done in R version 3.4.0 (R Core Team 2016).

#References

- Anderson J, Domsch K. 1978. A physiological method for the quantitative measurement of microbial biomass in soil. Soil Biol Biochem 10:215–21.
- Blackwood CB, Marsh T, Kim S-H, Paul EA. 2003. Terminal Restriction Fragment Length Polymorphism Data Analysis for Quantitative Comparison of Microbial Communities. Appl Environ Microbiol 69:926–32. http://www.ncbi.nlm.nih.gov/pmc/articles/PMC143601/
- Bongers T. 1988. De nematoden von Nederland. Schoorl, The Netherlands: Pirola
- Byrnes JEK, Gamfeldt L, Isbell F, Lefcheck JS, Griffin JN, Hector A, Cardinale BJ, Hooper DU, Dee LE, Duffy JE. 2014. Investigating the relationship between biodiversity and ecosystem multifunctionality: Challenges and solutions. Methods Ecol Evol 5:111–24.
- Crossley DAJ, Blair JM. 1991. A high-efficiency low-technology Tulgren-type extractor for soil microarthopods. Agric Ecosyst Environ 34:187–92.
- Dudley N. 2008. Guidelines for applying protected area managment categories. Gland: IUCN
- Frank DA, McNaughton SJ. 1990. Aboveground biomass estimation with the canopy intercept method: A plant growth form caveat. Oikos 57:57–60.
- Haynes AG, Schütz M, Buchmann N, Page-Dumroese DS, Busse MD, Risch AC. 2014. Linkages between grazing history and herbivore exclusion on decomposition rates in mineral soils of subalpine grasslands. Plant Soil 374.
- Hodel M, Schütz M, Vandegehuchte ML, Frey B, Albrecht M, Busse MD, Risch AC. 2014. Does the aboveground herbivore assemblage influence soil bacterial community composition and richness in subalpine grasslands? Microb Ecol 68:584–95.
- Liu WT, Marsh TL, Cheng H, Forney LJ. 1997. Characterization of microbial diversity by determining terminal restriction fragment length polymorphisms of genes encoding 16S rRNA. Appl Environ Microbiol 63:4516–22. http://www.ncbi.nlm.nih.gov/pmc/articles/PMC168770/
- Manning P, van der Plas F, Soliveres S, Allan E, Maestre FT, Mace G, Whittingham MJ, Fischer M. 2018. Redefining ecosystem multifunctionality. Nat Ecol Evol 2:427–36. https://doi.org/10.1038/s41559-017-0461-7
- Meola M, Lazzaro A, Zeyer J. 2014. Diversity, resistance and resilience of the bacterial communities at two alpine glacier forefields after a reciprocal soil transplantation. Environ Microbiol 16:1918–34. https://onlinelibrary.wiley.com/doi/abs/10.1111/1462-2920.12435
- Meyer ST, Koch C, Weisser WW. 2015. Towards a standardized Rapid Ecosystem Function Assessment (REFA). Trends Ecol Evol 30:390–7. http://www.sciencedirect.com/science/article/pii/S0169534715000968
- Norman R., Stucki JW. 1981. The determination of nitrate and nitrite in soil extracts by ultraviolet spectrophotometry. Soil Sci Soc Am J 45:347–53.
- Ochoa-Hueso R. 2016. Non-linear disruption of ecological interactions in response to nitrogen deposition. Ecology 87:2802–2814.
- Oostenbrink M. 1960. Estimating nematode populations by some selected methods. In: Sasser NJ, Jenkins WR, editors. Nematology. Chapel Hill, NC, USA: University of North Carolina Press. pp 85–101.
- R Core Team. 2016. R: A language and environment for statistical computing. Vienna, Austria: R Foundation for Statistical Computing
- Risch AC, Haynes AG, Busse MD, Filli F, Schütz M. 2013. The response of soil CO2 fluxes to progressively excluding vertebrate and invertebrate herbivores depends on ecosystem type. Ecosystems 16:1192–202.
- Risch AC, Schütz M, Vandegehuchte ML, Van Der Putten WH, Duyts H, Raschein U, Gwiazdowicz DJ, Busse MD, Page-Dumroese DS, Zimmermann S. 2015. Aboveground vertebrate and invertebrate herbivore impact on net N mineralization in subalpine grasslands. Ecology 96:3312–22.
- Schütz M, Risch AC, Achermann G, Thiel-Egenter C, Page-Dumroese DS, Jurgensen MF, Edwards PJ. 2006. Phosphorus translocation by red deer on a subalpine grassland in the Central European Alps. Ecosystems 9:624–633.
- Schütz M, Risch AC, Leuzinger E, Krüsi BO, Achermann G. 2003. Impact of herbivory by red deer (Cervus elaphus L.) on patterns and processes in subalpine grasslands in the Swiss National Park. For Ecol Manage 181:177–88.
- Vandegehuchte ML, van der Putten WH, Duyts H, Schütz M, Risch AC. 2017a. Aboveground mammal and invertebrate exclusions cause consistent changes in soil food webs of two subalpine grassland types, but mechanisms are system-speciﬁc. Oikos 126:212–23.
- Vandegehuchte ML, Raschein U, Schütz M, Gwiazdowicz DJ, Risch AC. 2015. Indirect short- and long-term effects of aboveground invertebrate and vertebrate herbivores on soil microarthropod communities. PLoS One 10:e0118679.
- Vandegehuchte ML, Schütz M, de Schaetzen F, Risch AC. 2017b. Mammal-induced trophic cascades in invertebrate food webs are modulated by grazing intensity in subalpine grassland. J Anim Ecol 86:1434–46.
- Vandegehuchte ML, Trivellone V, Schütz M, Firn J, de Schaetzen F, Risch AC. 2018. Mammalian herbivores affect leafhoppers associated with specific plant functional types at different timescales. Funct Ecol 32:545–55.
- Wirthner S, Frey B, Busse MD, Schütz M, Risch AC. 2011. Effects of wild boar (Sus scrofa L.) rooting on the bacterial community structure in mixed-hardwood forest soils in Switzerland. Eur J Soil Biol 47:296–302. http://dx.doi.org/10.1016/j.ejsobi.2011.07.003
- Zumsteg A, Luster J, Göransson H, Smittenberg RH, Brunner I, Bernasconi SM, Zeyer J, Frey B. 2012. Bacterial, Archaeal and Fungal Succession in the Forefield of a Receding Glacier. Microb Ecol 63:552–64. https://doi.org/10.1007/s00248-011-9991-8

ecosystem-coupling

display_name: ecosystem-coupling

ecosystem-functions

display_name: ecosystem-functions

ecosystem-multifunctionality

display_name: ecosystem-multifunctionality

exclusion

display_name: exclusion

grassland

display_name: grassland

grazing

display_name: grazing

invertebrates

display_name: invertebrates

subalpine

display_name: subalpine

swiss-national-park

display_name: swiss-national-park

vertebrates

display_name: vertebrates

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Ecosystem coupling and multifunctionality - exclosure experiment


maintainer: Athanasios Nenes

en: sigma-w ccn hygroscopicity cloud-droplets weissfluhjoch raclets supersaturation dmt-ccn-chamber cloud-modeling

en: Predicted cloud droplet number concentrations Weissfluhjoch

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Weissfluhjoch station between February 24 and March 8 2019. For this, a hygroscopicity parameter of 0.25 is assumed, according to the CCN-derived values. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Hygroscopicity parameter Weissfluhjoch

en:
The aerosol hygroscopicity parameter is derived combining the CCN and SMPS size distribution data collected between February 24 and March 8 2019 at Weissfluhjoch. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The instrument supersaturation (SS%)
* The calculated hygroscopicity parameter (kappa)
* The calculated critical dry diameter of the particles (Dcr) in nm.

Missing values are indicated by "-999".

en: CCN data Weissfluhjoch

en:
In-situ CCN measurements were conducted between February 24 and March 8 2019 at Weissfluhjoch. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* Filtered CCN number concentrations (in cmˉ³) measured at 6 discrete supersaturations (SS) ranging from 0.09% to 0.74%. The name of each CCN column is indicative of the SS developed within the instrument.
* Instrument characteristics such as sample temperature (in °C) and pressure (in mbar)
* A code that refers to the reason of filtering.

Missing or filtered CCN values are indicated by "-999", while a declaration of each "Error_code" can be found in the following list:

_Error_code_:

0000: Measurements without error

1000: Period of transient operation after a supersaturation change

2000: Sharp change (decrease) in the room temperature housing the instrument, which induces a reset in column temperature

3000: Irregular values in the room temperature housing the instrument

9999: Missing data

en:
Cloud Condensation Nuclei (CCN) data: A Droplet Measurement Technologies (DMT) single-column continuous-flow streamwise thermal gradient chamber (CFSTGC; Roberts and Nenes, 2005) was deployed at the measurement site Weissfluhjoch (2700 m a.s.l., LON: 9.806475, LAT: 46.832964) to record the in-situ CCN number concentrations between February 24 and March 8 2019 for different supersaturations (SS). To account for the difference between the ambient (~735 mbar) and the calibration pressure (~800 mbar), the SS reported by the instrument is adjusted by a factor of 0.92. The CFSTGC was cycled between 6 discrete SS values ranging from 0.09% to 0.74%, producing a full CCN spectrum every hour. The raw CCN measurements are filtered to discount periods of transient operation and whenever the room temperature housing the instrument changed sufficiently to induce a reset in column temperature. Additional information can be found in Section 2.1.2 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

Hygroscopicity data: The CCN number concentration measurements were directly related to the size distribution and total aerosol concentration data measured by the Scanning Mobility Particle Size Spectrometer (SMPS) instrument at the same station (https://www.envidat.ch/dataset/aerosol-data-weissfluhjoch) to infer the particles hygroscopicity parameter (kappa). For each SMPS scan, the particles critical dry diameter (Dcr) is estimated by integrating backward the SMPS size distribution, until the aerosol number matches the CCN concentration observed for the same time period as the SMPS scan. Assuming the particle chemical composition is internally mixed, the kappa is determined from Dcr and SS, applying Köhler theory. Additional information can be found in Section 2.2 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

Predicted cloud droplet numbers: Droplet calculations are carried out with the physically based aerosol activation parameterization of Morales and Nenes (2014), employing the “characteristic velocity” approach of Morales and Nenes (2010). Aerosol size distribution observations required to predict the cloud droplet numbers and maximum in-cloud supersaturation are obtained from the SMPS instrument deployed at Weissfluhjoch. The required vertical velocity measurements are derived from the wind Doppler Lidar (https://www.envidat.ch/dataset/lidar-wind-profiler-data) deployed at Davos Wolfgang and are extracted for the altitude of interest, being 1100 m above ground level for Weissfluhjoch. Additional information can be found in Section 2.3 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

ccn

display_name: ccn

cloud-droplets

display_name: cloud-droplets

cloud-modeling

display_name: cloud-modeling

dmt-ccn-chamber

display_name: dmt-ccn-chamber

hygroscopicity

display_name: hygroscopicity

raclets

display_name: raclets

sigma-w

display_name: sigma-w

supersaturation

display_name: supersaturation

weissfluhjoch

display_name: weissfluhjoch

en: CCN, hygroscopicity, predicted cloud droplet numbers Weissfluhjoch