maintainer: Peter Bebi

en: experiment carbon-dioxide vegetation soil-temperature climate-change

en: FACE DATASETS

media_type: application/zip

en: Project description

en: FACE experimental design

media_type: PNG

format: PNG

en:
 Overview
High elevation ecosystems are important in research about environmental change because shifts in climate associated with anthropogenic greenhouse gas emissions are predicted to be more pronounced in these areas than in most other regions of the world. This project involves a Free Air CO2 Enrichment (FACE) and soil warming experiment located in a natural treeline environment near Davos, Switzerland (Stillberg, 2200 m a.s.l.). Elevated atmospheric CO2 concentrations (+200 ppm) were applied from 2001 to 2009, and a soil warming treatment (+4 K) was added in 2007 (ongoing). The combined CO2 enrichment and warming treatment reflects conditions expected to occur in this region in approximately 2050. A broad range of ecological and biogeochemical research is carried out as part of this environmental change project.

#Experimental setup
The experiment consists of 40 hexagonal 1.1 m2 plots, 20 with a Pinus mugo ssp. uncinata (mountain pine, evergreen) individual in the centre and 20 with a Larix decidua (European larch, deciduous) individual in the centre. A dense cover of understorey vegetation surrounds the tree in each plot, including the dominant dwarf shrub species Vaccinium myrtillus (bilberry), Vaccinium gaultherioides (group V. uliginosum agg., northern bilberry) and Empetrum nigrum ssp. hermaphroditum (crowberry) plus several herbaceous and non-vascular species.

At the beginning of the experimental period, the 40 plots were assigned to 10 groups of four neighbouring plots (two larch and two pine trees per group) in order to facilitate the logistics of CO2 distribution and regulation. Half of these groups were randomly assigned to an elevated CO2 treatment while the remaining groups served as controls and received no additional CO2. In spring 2007, one plot of each tree species identity was randomly selected from each of the 10 CO2 treatment groups and assigned a soil warming treatment, yielding a balanced design with a replication of five individual plots for each combination of CO2 level, warming treatment and tree species.

#Data
Soil and air conditions have been monitored closely throughout the study period, with most measurements made during the combined CO2 x warming experiment (2007-2009).

carbon-dioxide

display_name: carbon-dioxide

climate-change

display_name: climate-change

experiment

display_name: experiment

soil-temperature

display_name: soil-temperature

vegetation

display_name: vegetation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: FACE: Stillberg CO2 enrichment and soil warming study


causal-effect-of-mfoz

maintainer: EnviDat Support

title_for_slug: causal-effect-of-mfoz

en: the-major-function-oriented-zone built-up-land-change propensity-score-matching fujian-province causality selection-bias

state: active

type: dataset

en: Data and Stata code for repeating the results

media_type: ZIP

en:
Data.xlsx is the variables of 952 townships
Table 1-2 NN(1-1)_noreplace_caliper(0.01).do is STATA code to produce the results in Table 1 and 2
Figure 5 Distribution of the propensity scores.R is R code rto produce Figure 5
Figure 5 Standard mean difference.R is R code rto produce Figure 5

format: ZIP

en:
Title: Closer to causality: How effective is spatial planning in governing built-up land expansion in Fujian Province, China?

Research objective: The Major Function Oriented Zone (MFOZ), the first strategic spatial plan in China, is developed to achieve a coordinated regional development, through spatial regulation and zoning of development. The MFOZ he MFOZ divided land into four major function-oriented zones: The development-optimized zone, the development-prioritised zone, the development-restricted zone, and the development-prohibited zone. We used propensity score marching to evaluate the effect of the MFOZ on built-up land expansion in Fujian Province over three time intervals (2013–2015, 2013–2018 and 2013–2020).

Data: Data.xlsx contains the variables of 954 towns in Fujian Province.
Town_ID is the town unique ID;
County_ID is the county unique ID;
City_ID is the city unique ID;
MFOZ is the the development-prioritised zone and the development-restricted zone (The development-optimized zone and the development-prohibited zone are excluded);
Builtup_13_15 is the built-up land expansion from 2013 to 2015;
Builtup_13_18 is the built-up land expansion from 2013 to 2018;
Builtup_13_20 is the built-up land expansion from 2013 to 2020;
Dis2water is the Euclidean distance from the town to the nearest waterbody;
Slope is the the average slope within the town;
GDP is the average GDP in 2010 within the town;
Pop is the average population in 2010 within the town;
Road is the average population in 2010 within the town;
Dis2city is the Euclidean distance from the town to the nearest prefectural city centre;
Nei_Arable, Nei_Forest, and Nei_Built.up are the area of arable land, forest land, and built-up land neighbouring town i in 2010.

Method: we used the propensity score matching to compare the changes in the amount of built-up land in the towns of the development-prioritised zone with the matched towns of the development-restricted zone. Additionally, we used three evaluation intervals (2013–2015, 2013–2018 and 2013–2020) to evaluate temporal variation in the causal effect of the MFOZ on built-up land expansion.

built-up-land-change

display_name: built-up-land-change

causality

display_name: causality

fujian-province

display_name: fujian-province

propensity-score-matching

display_name: propensity-score-matching

selection-bias

display_name: selection-bias

the-major-function-oriented-zone

display_name: the-major-function-oriented-zone

education

fr: Education, science

de: Bildung, Wissenschaft

it: Formazione e scienza

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Causal effect of MFOZ


restoring-grassland-multifunctionality

title_for_slug: restoring-grassland-multifunctionality

en: nematodes plants mineralization restoration fungi biodiversity ecosystem-multifunctionality grassland soil-biodiversity bacteria

en: Functional diversity above_belowground fauna

format: XLS

media_type: XLSX

en: Please note that C.sto and Corg have been corrected.

en: Please note that EMF, MF.below, MF.abio and Soil.hetero have been corrected.

en:
Please cite this paper together with the citation for the datafile.

Resch, M. C., Schütz, M., Buchmann, N., Frey, B., Graf, U., van der Putten, W. H., Zimmermann, S., Risch, A. C. 2021. Evaluating long-term success in grassland restoration – an ecosystem multifunctionality approach. Ecological Applications 31, e02271.

 Study area

The study was conducted in the Canton of Zurich, Switzerland, in and around two nature reserves Eigental and Altläufe der Glatt (47°27’ to 47°29’ N, 8°37’ to 8°32’ E, 417 to 572 m a.s.l.). All studied grasslands were located with a radius of approximately 4 km. Average monthly temperatures range from 0.7 ± 2.0 °C (January) to 19.0 ± 1.5 °C (July), and monthly precipitation range from 60 ± 42 mm (January) to 118 ± 46 mm (July [maxima]; 1989-2017; MeteoSchweiz 2018). In our study, we focused on semi-dry and semi-wet oligo- to mesotrophic grasslands characterized by high plant species richness and groundwater fluctuations throughout the year (Delarze et al. 2015, see also Resch et al. 2019).

 Experimental design and sampling

A large-scale restoration experiment to expand and reconnect isolated remnants of species-rich grasslands was initiated in the nature reserve Eigental in 1990. Twenty hectares of adjacent intensive grasslands were chosen for restoration. In 1995, three restoration methods of increasing intervention intensities were implemented. The goal of all three methods was to lower the availability of soil nutrients and hence, facilitate ecosystem development towards the targeted nutrient-poor grasslands. These methods were: Harvest only (hay harvest twice a year), Topsoil (removal of the nutrient-rich topsoil), and Topsoil+Propagules (topsoil removal combined with the application of hay from target vegetation). Plant biomass harvest (once a year in late summer/early autumn) commenced in Topsoil and Topsoil+Propagules five years after the soils were removed and is still ongoing today. We measured restoration success by comparing the three restoration methods with intensively managed (Initial) and semi-natural grasslands (Target) 22 years after restoration. Initial grassland sites share the same agricultural history as the restored sites: mowing and subsequent fertilizing (manure) up to five times a year, as well as different tillage regimes (Resch et al. 2019). Target sites were the sites from which hay for seeding the Topsoil+Propagules sites was collected. Soil conditions (i.e., soil types, soil texture) were comparable to those found in the restored grasslands (Resch et al. 2019). Additionally, Target sites were selected to represent a variety of semi-natural grasslands, including semi-dry to semi-wet conditions. In Target grasslands, biomass is harvested once a year in late summer or early autumn. Eleven 5 m x 5 m (25 m2) plots were randomly established in each of the five treatments (in total 55 plots; for a detailed map see Neff et al. 2020). An additional 2 m x 2 m (4 m2) subplot was randomly established at least 2 m away from each 25 m2 plot for destructive sampling. Data sampling took place between June and September 2017.

Vegetation properties

All plant species were identified within the 25 m2 plots (nomenclature: Lauber and Wagner 1996) in mid-June 2017 (in total 250 species). Vegetation structure and plant biomass were assessed diagonally on a transect of 2 m x 10 cm within the 25 m2 plot in early July 2017. We measured the maximum and mean height of the vegetation at the start, middle and end of the transect and calculated the standard deviation of these measures to describe vegetation structural heterogeneity (Schuldt et al. 2019). Thereafter, biomass was clipped on the entire transect to 1 cm height, sorted into five functional groups (graminoids, forbs, legumes, litter, and woody species), dried at 60 °C for 48 h, and weighed (Meyer et al. 2015).

 Aboveground arthropods

Aboveground arthropods were sampled at two locations in each 25 m2 plot in early July 2017 (see also Neff et al. 2020). Briefly, two cylindrical baskets (50 cm diameter, 67 cm height; woven fabric) were thrown simultaneously from outside the plot into two opposite corners. A closable mosquito mesh sleeve was mounted to the top of the baskets and an integrated metal ring at the bottom was fixed to the ground with metal stakes to assure that insects could not escape. A suction sampler (Vortis, Burkhard Manufacturing Co. Ltd., Hertfordshire, England) was then inserted into one of the baskets through the opening of the sleeve and the plot was “vacuumed" twice for 105 seconds with a 30 seconds break. The collected animals were immediately transferred into 70% ethanol. Arthropods were sorted and assigned to 23 taxonomic groups. Holometabolic larvae were lumped into one category while hemimetabolic larvae were grouped separately from adults in the respective taxonomic rank. We used mean values of individuals per plot for total abundance. Aboveground arthropod richness was defined by the number of different taxa to lowest taxonomic level (in total 23 taxa). All taxa were assigned to one of five trophic levels: 1) primary producers, 2) primary consumers, 3) secondary consumers, 4) tertiary consumers, and 5) quaternary consumers.

 Belowground fauna

Sampling of all belowground fauna took place in mid-July 2017. Earthworms were sampled in two 30 cm x 30 cm x 20 cm soil monoliths at two opposite corners of the 25 m2 plot (opposite to aboveground arthropod sampling). The excavated soil monolith was broken by hand, all earthworms collected and immediately transferred in a 4% formaldehyde solution. Thereafter, earthworm individuals were identified to species level (in total 10 taxa; Christian and Zicsi 1999) and species assigned to three functional groups (Bouché 1977).
To assess soil arthropod communities, we randomly collected one undisturbed soil core (5 cm diameter, 12 cm depth) in each 4 m2 subplot with a slide hammer corer lined with a plastic sleeve (AMS Samplers, American Falls, Idaho, USA). Soil arthropods were extracted using Berlese-Tullgren funnels (3 mm mesh), starting the day of sampling and lasting 14 days. Individuals were stored in 70% ethanol. Soil arthropods were assigned to 41 taxonomic groups and 4 feeding types. Holometabolic and hemimetabolic larvae were treated as previously described for aboveground arthropods. Belowground arthropod richness refers to the 41 taxonomic groups.

For soil nematode sampling, we randomly collected eight soil cores of 2.2 cm diameter (Giddings Machine Company, Windsor, CO, USA) within each 4 m2 subplot to a depth of 12 cm. The eight cores were combined, gently homogenized, placed in coolers, kept at 4 °C and transported to the laboratory at NIOO in Wageningen (NL) within one week after collection. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriator (Oostenbrink 1960) and prepared for morphological identification and quantification as described by Resch et al. (2019). Nematodes were identified to family level (39 taxa) according to Bongers (1988), assigned to 17 functional groups, 5 feeding types and 5 colonizer-persister (C-P) classes (Yeates et al. 1993, Bongers 1990, Resch et al. 2019).

We randomly collected two more soil cores (2.2 cm diameter x 12 cm depth) within each 4 m2 subplot to determine soil microbial communities. Again, the soil cores were combined, homogenized, placed in coolers and transported to the laboratory at WSL in Birmensdorf (Switzerland) where the metagenomic DNA was extracted from 8 g sieved soil (2 mm) using the DNeasy PowerMax Soil Kit (Quiagen, Hilden, NRW, GER) according to the manufacturer`s instructions. PCR amplification of the V3-V4 region of the prokaryotic small-subunit (16S) and the ribosomal internal transcribed spacer region (ITS2) of eukaryotes was performed with 1 ng of template DNA utilizing PCR primers and conditions as previously described (Frey et al., 2016). PCRs were run in triplicates and pooled. The pooled amplicons were sent to the Genome Quebec Innovation Centre (Montreal, QC, Canada) for barcoding using the Fluidigm Access Array technology (Fluidigm) and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, CA, USA). Quality filtering, clustering into operational taxonomic units (OTUs) and taxonomic assignment were performed as described by Frey et al. (2016) and Adamczyk et al. (2019). We used a customised pipeline largely based on UPARSE (Edgar 2013) implemented in USEARCH v. 9.2 (Edgar 2010). After discarding singletons of dereplicated sequences, clustering into OTUs with 97% sequence similarity was performed (Edgar 2013). Quality-filtered reads were mapped on the filtered set of centroid sequences. Taxonomic classification of prokaryotic and fungal sequences was conducted querying against most recent versions of SILVA (v.132, Quast et al. 2013) and UNITE (v.8, Nilsson et al. 2018). Only taxonomic assignments with confidence rankings equal or higher than 0.8 were accepted (assignments below 0.8 set to unclassified). Prokaryotic OTUs assigned to mitochondria or chloroplasts as well as eukaryotic OTUs assigned other than fungi were removed prior to data analysis. In addition, prokaryotic and fungal datasets were filtered to discard singletons and doubletons. Thereafter, OTU abundance matrices were rarefied to the lowest number of sequences per community, to normalize the total number of reads and achieve parity between samples (Prokaryota: 29,843 reads; Fungi: 26,690 reads). Finally, prokaryotic and fungal observed richness (number of OTUs) were estimated (Prokaryota: 14,010 OTUs; Fungi: 5,813 OTUs). For prokaryotes, we distinguished five and for fungi six functional types based on lowest taxonomic resolution (Nguyen et al. 2016, Tedersoo et al. 2014). Belowground taxon richness was defined by the total number of earthworm, arthropod, nematode, fungi, and prokaryote taxa assigned to lowest taxonomic level. Finally, all belowground taxa were assigned to the same five trophic levels as the aboveground arthropods.

 Soil chemical and physical properties, soil nitrogen mineralization

We randomly collected three 5 cm diameter x 12 cm depth soil samples in each 4 m2 subplot with a slide hammer corer (AMS Samplers, American Falls, Idaho, USA), pooled them and then made two subsamples. One was field-fresh and stored at 3 °C until analysis, the other was dried for 48 h at 60 °C and passed through a 4 mm mesh. From the dried sample, we measured soil pH potentiometrically in 0.01 M CaCl2 (soil:solution ratio=1:2; 30 minutes equilibration time). Total and organic carbon content were measured on fine-ground samples (≤ 0.5 mm) by dry combustion using a CN analyzer NC 2500 (CE Instruments, Wigan, United Kingdom). Inorganic carbon of samples with a pH > 6.5 was removed with acid vapor prior to analysis of organic carbon (Walthert et al. 2010). We calculated total soil carbon (C) storage after correcting its content for soil depth, stone content and density of fine earth (see below). Exchangeable cations were determined on another 5 g dry soil sample with 50 mL unbuffered 1 M NH4Cl solution (soil:solution ratio=1:10, end-over-end shaker for 1.5 hours) and measured by an ICP-OES (Optima 7300 DV, Perkin-Elmer, Waltham, Massachusetts, USA). Thereafter, cation exchange capacity (CEC) was calculated as the sum of exchangeable cations and protons (and expressed as mmolc per 1 kg soil) and used to describe nutrient retention capacity in our plots. Concentrations of exchangeable protons were calculated as the difference between total and Al-induced exchangeable acidity as determined by the KCl-method (Thomas 1982).

Ammonium (NH4+) and nitrate (NO3−) were extracted from a 20 g fresh subsample with 80 mL 1M KCl for 1.5 hours on an end-over-end shaker and filtered through ashless folded filter paper (DF 5895 150, ALBET LabScience, Hahnemühle FineArt GmbH, Dassel, Germany). NH4+ concentrations were determined colorimetrically by automated flow injection analysis (FIAS 300, Perkin-Elmer, Waltham, Massachusetts, USA). NO3− concentrations were measured colorimetrically according to Norman and Stucki (1981). Potential soil net nitrogen (N) mineralization was assessed during an 8-week incubation period under controlled moisture (60% of field capacity), temperature (20 °C) and light conditions (dark) in the laboratory. We weighed duplicate samples of fresh soil equivalent to 8 g dry soil (24 h at 104 °C) into 50 mL Falcon tubes. Soil samples were extracted for NH4+ and NO3− at the beginning and after eight weeks as described above. Soil net N mineralization was calculated as the difference between the inorganic nitrogen (NH4+ and NO3−) before and after the incubation (Hart et al. 1994), corrected for the total incubation time and represented per day values expressed as mg N kg-1 soil d-1.

To assess soil physical properties, we randomly collected one undisturbed soil core per 4 m2 subplot (5 cm diameter, 12 cm depth) in a steel cylinder that fit into the slide hammer (AMS Samplers, American Falls, Idaho, USA). The cylinder was capped in the field to avoid disturbance. We then measured field capacity in the laboratory. For this purpose, the cylinder and soil therein were saturated in a water bath and drained on a sand/silt-bed with a suction corresponding to 60 cm hydrostatic head. The moist soil was dried at 105 °C to constant weight. Field capacity was calculated by dividing the mass of water by the total mass of wet soil contained at 60 cm hydrostatic head and used to describe water holding capacity. Thereafter, samples were passed through a 4 mm mesh. Fine-earth and skeleton fractions were weighed separately to assess bulk soil density (fine-earth plus skeleton), density of fine earth, and proportion of skeleton. Particle density was determined with the pycnometer method (Blake and Hartge 1986), and total porosity and proportion of fine pores were calculated (Danielson and Sutherland 1986). Clay, silt, and sand contents were quantified with the sediment method (Gee and Bauder 1986).

Surface and soil temperature (12 cm depth, water-resistant digital pocket thermometer; IP65, H-B Instrument, Trappe, Pennsylvania, USA) as well as volumetric soil moisture content (12 cm depth, time domain reflectometry; Field-Scout TDR 300, Spectrum Technologies, Aurora, Illinois, USA) were measured at five random locations within the 4 m2 subplots every month from June to September. We calculated the standard deviation of each temperature and moisture measure over four months to describe seasonal variations. Slope inclination was determined at plot-level via GPS measurements (GPS 1200, Leica Geosystem, Heerbrugg, Switzerland) and categorized into slope gradient classes according to FAO standards (1990). Thickness of the topsoil horizon (equivalent to Ah or Aa horizon) was determined at one soil monolith (30 x 30 x 30 cm3) per 4 m2 subplot in cm and rounded to next integer.

 References

Adamczyk, M., F. Hagedorn, S. Wipf, J. Donhauser, P. Vittoz, C. Rixen, A. Frossard, J. Theurillat, and B. Frey. 2019. The soil microbiome of GLORIA mountain summits in the Swiss Alps. Frontiers in Microbiology 10:1080-1101.

Blake, G.R., and K. H. Hartge. 1986. Particle Density. Pages 377-382 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Bongers, T. 1988. De nematoden van Nederland. Stichting Uitgeverij van de Koniklijke Nederlandse Natuurhistorische Verenigung (KNNV), Utrecht.

Bongers, T. 1990. The maturity index: an ecological measure of environmental disturbance based on nematode species composition. Oecologia 83:14-19.

Bouché, M. B. 1977. Strategies lombriciennes. Ecological Bulletins 25:122-132.

Christian, E., and A. Zicsi. 1999. Ein synoptischer Bestimmungsschlüssel der Regenwürmer Österreichs (Oligochaeta: Lumbricidae). Die Bodenkultur 50:121-131.

Danielson, R. E., and P. L. Sutherland. 1986. Porosity. Pages 443-461 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Delarze, R., Y. Gonseth, S. Eggenberg, and M. Vust. 2015. Lebensräume der Schweiz: Ökologie ‐ Gefährdung ‐ Kennarten, Ott Verlag, Bern.

Edgar, R. C. 2010. Search and clustering orders of magnitude faster than BLAST. Bioinformatics 26:2460–2461.

Edgar, R. C. 2013. UPARSE: highly accurate OTU sequences from microbial amplicon reads. Nature Methods 10:996–998.

FAO. 1990. Guidelines for soil description, third ed. Land and Water Development Division at the Food and Agriculture Organization of the United Nations (FAO), Rome.

Frey, B., T. Rime, M. Phillips, B. Stierli, I. Hajdas, F. Widmer, and M. Hartmann. 2016. Microbial diversity in European alpine permafrost and active layers. FEMS Microbiology Ecology 92:fiw018.

Gee, G.W., and J. W. Bauder. 1986. Particle-size analysis. Pages 383-411 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Hart, S. C, J. M. Stark, E. A. Davidson, and M. K. Firestone. 1994. Nitrogen mineralization, immobilization, and nitrification. Pages 985-1016 in R. W. Weaver, S. Angle, P. Bottomley, D. Bezdicek, S. Smith, A. Tabatabai, and A. Wollum, editors. Methods of soil analysis: Part 2—Microbiological and biochemical properties. Soil Science Society of America (SSSA) Inc., Madison.

Lauber, K., Wagner, G., 1996. Flora Helvetica. Flora der Schweiz. Haupt Verlag, Bern.

MeteoSchweiz, 2018. Klimabulletin Jahr 2017. MeteoSchweiz, Zürich.

Meyer, S. T., C. Koch, and W. W. Weisser. 2015. Towards a standardized rapid ecosystem function assessment (REFA). Trends in Ecology and Evolution 30:390-397.

Neff, F., M. C. Resch, A. Marty, J. Rolley, M. Schütz, A. C. Risch, and M. M. Gossner. 2020. Long-term restoration success of insect herbivore communities in semi-natural grasslands – a functional approach. Ecological Applications 0:e02133

Nguyen, N.H., Z. W. Song, S. T. Bates, S. Branco, L. Tedersoo, J. Menke, J. S. Schilling, and P. G. Kennedy. 2016. FUNGuild: an open annotation tool for parsing fungal community datasets by ecological guild. Fungal Ecology 20:241–248.

Nilsson, R. H., K.-H. Larsson, A. F. S. Taylor, J. Bengtsson-Palme, T. S. Jeppesen, D. Schigel, P. G. Kennedy, K. Picard, F. O. Glöckner, L. Tedersoo, I. Saar, U. Kõljalg, and K. Abarenkov. 2018. The UNITE database for molecular identification of fungi: handling dark taxa and parallel taxonomic classifications. Nucleic Acids Research 47:259–264.

Norman, R. J., and J. W. Stucki. 1981. The Determination of Nitrate and Nitrite in Soil Extracts by Ultraviolet Spectrophotometry. Soil Science Society of America Journal 45:347-353.

Oostenbrink, M. 1960. Estimating nematode populations by some selected methods. Pages 81-101 in J. J. Sasser, and W. R. Jenkins, editors. Nematology. Univ. of North Carolina Press, Chapel Hill.

Quast, C., E. Pruesse, P. Yilmaz, J. Gerken, T. Schweer, P. Yarza, J. Peplies, and F. O. Glöckner. 2013. The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research 41:590-596.

Resch, M. C., M. Schütz, U. Graf, R. Wagenaar, W.H. van der Putten, and A. C. Risch. 2019. Does topsoil removal in grassland restoration benefit both soil nematode and plant communities? Journal of Applied Ecology 56:1782-1793.

Schuldt, A., A. Ebeling, M. Kunz, M. Staab, C. Guimarães-Steinicke, D. Bachmann, N. Buchmann, W. Durka, A. Fichtner, F. Fornoff, W. Härdtle, L. R. Hertzog, A-N. Klein, C. Roscher, J. Schaller, von G. Oheimb, A. Weigelt, W. Weisser, C.Wirth, J. Zhang, H. Bruelheide, and N. Eisenhauer. 2019. Multiple plant diversity components drive consumer communities across ecosystems. Nature Communications 10:1460.

Tedersoo, L., M. Bahram, S. Põlme, U. Kõljalg, N. S. Yorou, R. Wijesundera, L. Villarreal Ruiz, A. M. Vasco-Palacios, P. Q. Thu, A. Suija, M. E. Smith, C. Sharp, E. Saluveer, A. Saitta, M. Rosas, T. Riit, D. Ratkowsky, K. Pritsch, K. Põldmaa, M. Piepenbring, C. Phosri, M. Peterson, K. Parts, K. Pärtel, E. Otsing, E. Nouhra, A. L. Njouonkou, R. H. Nilsson, L. N. Morgado, J. Mayor, T. W. May, L. Majuakim, D. J. Lodge, S. See Lee, K.-H. Larsson, P. Kohout, K. Hosaka, I. Hiiesalu, T. W. Henkel, H. Harend, L.-D. Guo, A. Greslebin, G. Grelet, J. Geml, G. Gates, W. Dunstan, C. Dunk, R. Frenkhan, L. Dearnaley, A. De Kesel, T. Dang, X. Chen, F. Buegger, F. Q. Brearley, G. Bonito, S. Anslan, S. Abell, and K. Abarenkov. 2014. Global diversity and geography of soil fungi. Science 346:1256688.

Thomas, G.W. 1982. Exchangeable cations. Pages 159-165 in A. L. Page, R. H. Miller, and D. R. Keeney, editors. Methods of Soil Analysis: Part 2—Chemical and microbiological properties. Soil Science Society of America (SSSA) Inc., Madison.

Walthert, L., U. Graf, A. Kammer, J. Luster, D. Pezzotta, S. Zimmermann, and F. Hagedorn. 2010. Determination of organic and inorganic carbon, δ13C, and nitrogen in soils containing carbonates after acid fumigation with HCl. Journal of Plant Nutrition and Soil Sciences 173:207-216.

Yeates, G. W., T. Bongers, R. G. M. de Goede, D. W. Freckman, and S. S. Georgieva. 1993. Feeding habits in soil nematode families and genera – an outline for soil ecologists. Journal of Nematology 25:315-331.

bacteria

display_name: bacteria

biodiversity

display_name: biodiversity

ecosystem-multifunctionality

display_name: ecosystem-multifunctionality

fungi

display_name: fungi

grassland

display_name: grassland

mineralization

display_name: mineralization

nematodes

display_name: nematodes

plants

display_name: plants

restoration

display_name: restoration

soil-biodiversity

display_name: soil-biodiversity

en: Restoring grassland multifunctionality


maintainer: Anita C. Risch

en: weed-management non-native-plant herbivory native-plant grassland

en: Correction: Data file native and non-native plant interactions in Australian grasslands

en:
taxa tab:	list and overview of all the recorded species

* family:                 family of the plant

* genus:                genus of the plant

* species:                plant species name

* origin:                indicates whether the plant is native to Australia or not (non-native)

* common name:	        common name of the plant species

* functional group:	        functional group of the plant species: forb, graminoid, fern, tree

* functional group detailed:	gives more detail about the type of graminoid and forb: legume, forb (non-leguminous),
                        grass, sedge, rush, fern, tree

* lifeform:                annual or perennial lifeform (species which can have both of these lifeforms where
                        considered as annuals)

plot tab:	list of species found in each plot and their cover (%)

* sampling.session:        provides information about the sampling time:
                        May2020 = data that was collected in May 2020
                        Nov2020 = data that was collected in November 2020

* farm.name:	            name of the farms where the sampling took place:
                        SF = farm of the Southern group
                        NF = farm of the Northern group
                        numbers 1-3 = randomly allocated to the Southern group of farms
                        numbers 4-6 = randomly allocated to the Northern group of farms

* site.type:	                KG: Kangaroo grass dominated site
                        ALG: ALG+KG site (Kangarooo grass and African lovegrass co-dominated site)

* plot.no:                plot number: 9-12

* scientific.name:	        scientific name of the plant species found in a certain plot

* functional group:	        indicates whether the species found is a tree, forb, graminoid or fern

* functional group detailed:	indicates whether the species found is a tree, legume, forb (non-leguminous),
                        grass, sedge, rush, fern

* lifeform:                specifies the lifeform of the species: annual or perennial lifeform
                        (species which can have both of these lifeforms where considered as annuals)

corrections tab:	Detailed description of corrections made in plot.data tab

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Schlierenzauer, C., Risch, A.C., Schütz, M., Firn, J. 2021. Non-native Eragrostis curvula reduces plant species diversity in pastures of South-eastern Australia even when native Themeda triandra remains co-dominant. Plants 10, 596._

Please cite this paper together with the citation for the datafile.

Study area
The study was conducted in the lowland grassy woodlands of the Bega Valley Region, which is located in the south-east corner of New South Wales, Australia. Embedded between the Pacific Ocean and the Australian Alps, the lowland grassy woodlands are mostly located on granitic substrates and reach elevations of roughly 500 m above sea level. Typically, these grassy woodlands receive less precipitation (mean annual precipitation between 700-1100 mm) compared to the more elevated areas that surround them (NSW Government - Office of Environment and Heritage 2017).
The vegetation is dominated by an open tree canopy layer consisting of Eucalyptus tereticornis Sm, Angophora floribunda Sm. (Sweet) and a range of other eucalypt species. Sometimes shrub or small trees are also present, whereas grasses and forbs form the ground-cover. In areas without intensive agricultural history, this layer is dominated by perennial, tussock grasses such as Themeda triandra Forssk, Microlaena stipoides R.Br (Weeping Grass), Eragrostis leptostachya Steud. (Paddock Lovegrass) and Echinopogon ovatus P.Beauv (Forest Hedgehog Grass). The remaining inter-tussock spaces are occupied by a diversity of growth-restricted grasses and herbaceous forbs (NSW - Department of Planing, Industries and Environment 2019; NSW Government - Office of Environment and Heritage 2017).
Clearing, pasture sowing, fertilizer application and livestock grazing resulted in a dramatic decrease in the extent of these natural woodlands, with less than five percent within conservation reserves and overall, with only about 20% of their original extent in New South Wales still existing (Tozer et al. 2010). The remaining areas outside of reserves are threatened by altered fire frequencies, habitat clearing, livestock grazing and especially by non-native plant invasion, particularly Eragrostis curvula (Schrad.) Nees. For this reason, the grassy woodlands are listed as an endangered ecological community in the NSW state legislation. Additionally, they are considered as critically endangered by the Commonwealth of Australia (Threatened Species Scientific Committee (TSSC) 2013).

Experimental design and sampling
The study was conducted on six farms and in each of them two sites were chosen, representing a paired design. One of the sites at each farm is dominated by native Themeda triandra, the other one co-dominated by non-native Eragrostis curvula and Themeda triandra. All farms are within a radius of approximately 10 km from the town Candelo. Three of the farms are located North (36°40’ to 36°42’ S and 149°38’ to 149°42’ E) and three of them are located South (36°51’ to 36°49’ S and 149°38’ to 149°42’ E) of Candelo.
Non-native herbivores (mainly cattle, sheep and rabbits) and native herbivorous marsupials (mainly kangaroos, wallabies and wombats) are present in the area of these sites. On each site, data was collected within four plots (each 1 x 1 m) in May and November 2020. All plant species found within a plot were recorded and their relative abundance was estimated.

References
NSW - Department of Planing, Industries and Environment. 2019. “Lowland Grassy Woodland in the South East Corner Bioregion - Endangered Ecological Community Listing.” https://www.environment.nsw.gov.au/topics/animals-and-plants/threatened-species/nsw-threatened-species-scientific-committee/determinations/final-determinations/2004-2007/lowland-grassy-woodland-south-east-corner-bioregion-endangered-ecological-community-l (February 18, 2021).
NSW Government - Office of Environment and Heritage. 2017. “Lowland Grassy Woodland in the South East Corner Bioregion - Profile.” https://www.environment.nsw.gov.au/threatenedSpeciesApp/profile.aspx?id=20070 (January 31, 2021).
Threatened Species Scientific Committee (TSSC). 2013. Environment Protection and Biodiversity Conservation Act 1999 (EPBC Act) Conservation Advice for Lowland Grassy Woodland in the South East Corner Bioregion. http://www.environment.gov.au/biodiversity/threatened/communities/pubs/82-conservation-advice.pdf.
Tozer, Mark et al. 2010. “Native Vegetation of Southeast NSW: A Revised Classification and Map for the Coast and Eastern Tablelands.” Cunninghamia : a journal of plant ecology for eastern Australia 11(3): 359–406.

herbivory

display_name: herbivory

native-plant

display_name: native-plant

non-native-plant

display_name: non-native-plant

weed-management

display_name: weed-management

en: Native and no-native plant interactions in Australian grasslands


en: biogeochemical-cycling wolf detritus carrion decomposition bacteria fungi yellowstone carcass soil-biodiversity

en:
Site	ID for different carcasses across the Yellowstone Landscape
Location	Sampling location, either under carcass or control plot
Species	Indicating whether carcass was from bison or elk
Gender	Gener of carcass; F = female, M = male, ? = unknown
Lat	Latitude
Long	Longitude
DSK	Days since kill; in days
Soil.N	Soil N concentration (%)
Soil.C	Soil C concentration (%)
Veg.C	Vegetation C concentration (%); dominant grasses sampled
Veg.N	Vegetation N concentration (%); dominant grasses sampled
Veg.CtoN	Vegetation C to N ratio; dominant grasses sampled
Soil.resp	Soil respiration (g m-2 h-1)
soil.temp	Soil temperature (°C)
Soil.moist	Soil moisture (volumentric; %)
CRR	Cotton rotting rate
bacteria.richness	Bacteria richness
bacteria.diversity	Bacteria diverstiy
fungi.richness	Fungi richness
fungi.diversity	Fungi diversity
bacteria.abundance	Bacteria abundance
fungi.abundance	Fungi abundance

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch, A.C., Frossard, A., Schütz, M., Frey, B., Morris, A.W., Bump, J.K. (accepted) Effects of elk and bison carcasses on soil microbial communities and ecosystem functions in Yellowstone, USA. (accepted). Functional Ecology
doi: ...

Methods
Study area and study sites
This study was conducted in YNP’s Northern Range (NR), located in north-western Wyoming and south-western Montana, USA (~44.9163° N, 110.4169° W). The NR expands over ~1000 km2 and features long cold winters and short dry summers. Grasslands and shrublands dominate the NR that is the home of large migratory herds of bison (winter counts 2017: ~3919 individuals; Geremia, Wallen, & White, 2017) and elk (~5349 individuals) as well as their main predators, approximately five packs of wolves with a total of 33 individuals (Smith et al., 2017). As part of a long-term research program within YNP, wolf predation has been studied since their reintroduction in 1995.
For our study, we received ground-truthed coordinates of bison and elk carcasses from winter 2016/17 (November 2016 through April 2017) from the YNP Wolf Project. Between June 20 and July 1, 2017, we visited 24 carcasses in total. At five sites, we could not sample as the carcasses were no longer found. In total we located remains (hairmats, rumen content, bones, teeth) of 19 adult male and female carcasses (7 bison, 12 elk; Supplementary Table 1). Live body weights of adult bison and elk are approximately 730 kg (male bison), 450 kg (female bison), 330 kg (male elk), and 235 kg (female elk, Meagher, 1973; Quimby & Johnson, 1951).
The kills and subsequent consumption happened between 34 and 173 days prior to our sampling (hereafter “days since kill”, DSK), for which we accounted in our statistics. Note that wolves and other scavengers consumed the soft tissue of the carcasses quickly, hence, there is close to no soft tissue left for decomposition as compared to an intact body left on the soil surface. The 19 carcass sites covered the extent of YNP’s NR, with both bison and elk carcasses showing similar distributions; elevation ranged from 1703 to 2884 m a.s.l. (Supplementary Fig 1 & Supplementary Table 1). The carcasses were all located in grassland or sage-brush shrubland, with or without sparsely scattered trees, and both bison and elk carcasses showed the same distribution of DSK. At each study site, we selected a reference plot (hereafter “control”) that was of comparable size, slope aspect and vegetation to the carcass location (hereafter “carcass”). The control was at least 10 m away (Danell, Berteaux, & Brathen, 2002; Melis et al., 2007) from the carcass itself to ensure the absence of potential direct and indirect carcass effects (paired design; (Bump, Webster, et al., 2009; Bump, Peterson, et al., 2009).

Ecosystem functions and soil properties
We randomly collected 50 g of mineral soil from three locations on both control and carcass plots to a depth of 5 cm with sterile techniques and gently mixed the material to obtain a composite sample. Half the soil sample was immediately bagged in plastic bags (whirl packs), stored in a cooler with ice packs (~5 ºC), sieved (2-mm) and frozen within 4-6 hours of collection to assess soil microbial communities. For this purpose, we extracted total genomic DNA from 0.5 g soil using the PowerSoil DNA Isolation Kit (Qiagen, Hilden, Germany). DNA concentrations were measured using PicoGreen (Molecular Probes, Eugene, OR, USA). PCR amplifications of partial bacterial small-subunit ribosomal RNA genes (region V3–V4 of 16S rRNA) and fungal ribosomal internal transcribed spacers (region ITS2) were performed as described previously (Frey et al., 2016). Each sample consisting of 40 ng DNA was amplified in triplicate and pooled before purification with Agencourt AMPure XP beads (Beckman Colter, Berea, CA, USA) and quantified with the Qubit 2.0 fluorometric system (Life Technologies, Paisley, UK). Amplicons were sent to the Genome Quebec Innovation Center (Montreal, Canada) for barcoding using the Fluidigm Access Array technology and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, CA, USA).
Quality control of bacterial and fungal reads was performed using a customized pipeline (Supplementary Table 2; Frey et al., 2016). Paired-ends reads were matched with USEARCH (Edgar & Flyvbjerg, 2015), substitution errors were corrected using Bayeshammer (Nikolenko, Korobeynikov, & Alekseyev, 2013) and PCR primers were trimmed (allowing for 1 mismatch, read length >300 bp for 16S and >200 bp for ITS primers) using Cutadapt (M. Martin, 2011). Sequences were dereplicated and singleton reads removed prior to clustering into operational taxonomic units (OTUs) at 97% identity using USEARCH (Edgar, 2013). The remaining centroid sequences were tested for the presence of ribosomal signatures using Metaxa2 (Bengtsson-Palme et al., 2015) or ITSx (Bengtsson-Palme et al., 2013). Taxonomic assignments of the OTUs were obtained using Bayesian classifier (Wang, Garrity, Tiedje, & Cole, 2007) with a minimum bootstrap support of 60% implemented in mothur (Schloss et al., 2009) by querying the bacterial and fungal reads against the SILVA Release 128 (Quast et al., 2013) and UNITE 8.0 (Abarenkov et al., 2010) reference databases for 16S and ITS OTUs, respectively.
Abundances of the bacterial 16S rRNA gene and fungal ITS amplicon were determined by quantitative real-time PCR (qPCR) on an ABI7500 Fast Real-Time PCR system (Applied Biosystems, Foster City, CA, USA) as described previously (Frossard et al., 2018). The same primers (without barcodes) and cycling conditions as for the sequencing approach were used for the 16S and ITS qPCR. Three standard curves per target region were obtained using tenfold serial dilutions of plasmids generated from cloned targets (Frey, Niklaus, Kremer, Lüscher, & Zimmermann, 2011). Data were converted to represent mean copy number of targets per gram of soil (dry weight).
The other half of the soil sample was bagged in paper, dried to constant weight at 60°C, passed through a 2 mm sieve and analyzed for total C and N concentration with a CE Instruments NC 2100 soil analyzer (CE Elantech Inc., Lakewood NJ, USA). We also collected 20 mature and undamaged leaves of the dominant grass species growing on control and carcass sites, but taxa were not recorded. The plant material was dried at 60°C, finely ground till homogenized and also analyzed to obtain total C and N concentrations. Soil temperature (10 cm depth) was measured with a waterproof digital thermometer (Barnstead International, Dubuque IA, USA) at three locations each at the control and carcass site. Soil moisture (0 – 10 cm depth) was measured with time domain reflectometry (Field-Scout TDR-100; Spectrum Technologies, Plainfield IL, USA) at five randomly chosen points on control and carcass sites. We measured soil respiration at five randomly chosen points at both control and carcass sites with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA). For each measurement the soil chamber (15 cm high; 10 cm diameter) was tightly placed on the soil surface, after clipping plants to avoid measuring plant respiration or photosynthesis. Measurements were conducted over 120 s.
In addition, we assessed the decomposition rates of standardized OM using the cotton strip assay (Latter & Howson, 1977; Latter & Walton, 1988). Cotton cloth tensile strength loss (CTSL) is a measure of decomposition, and an index to express the combined effect of soil microclimatic, physical, chemical and biological properties on decomposition while accounting for OM quality (Latter & Walton, 1988; Risch, Jurgensen, & Frank, 2007; Withington & Sanford Jr., 2007). We placed five 20 cm wide x 13 cm long sheets of 100% unbleached cotton cloth (American Type SM 1/18’’, Warp: 34/1, Weft: 20/1, Weave plain, 29.5 picks/cm warp, 22 picks/cm weft, 237 g/m2; Daniel Jenny & Co., Switzerland;) at each carcass and control site vertically into the soil by making slits with a flat spade to a depth of 12 cm. We inserted each cloth with the spade, and then pushed the slit closed to assure tight contact with the soil. The cloths were retrieved after 18 to 27 days. After retrieval, the cloths were air-dried, remaining soil gently removed by hand, and 1.5 cm wide strips were cut at the 3.5-5.0 cm (top) and the 9-10.5 cm (bottom) soil depth. The strips were equilibrated at 50 % relative humidity and 20°C for 48 hours (climate chamber) prior to strength testing (Scanpro Awetron TH-1 tensile strength tester; AB Lorentzen and Wettre, Kista, Sweden). Cotton rotting rate (CRR) = (CTScontrol - CTSfinal/CTSfinal)1/3 * (365/t), where CTScontrol is the cotton tensile strength of a control cloth and CTSfinal the cotton tensile strength of the incubated sample, t is the incubation period in days. Control cloths were inserted into the ground and immediately retrieved to account for tensile strength loss associated with cloth insertion. We averaged the CRR of top and bottom strips for further analyses as no difference was found between the two. All sampling and cloth insertion took place between June 20 and July 1, 2017, cloths were retrieved between July 17 and 20, 2017. Soil respiration, average CRR, vegetation N concentration and vegetation C:N ratio are defined as ecosystem functions, soil C and N concentration, soil temperature and moisture as soil abiotic properties, and bacterial and fungal richness (number of taxa), diversity (Shannon) and abundance as soil biotic properties.

Statistical analyses
Univariate analyses for ecosystem functions, soil biotic and abiotic properties
We tested whether individual ecosystem functions, soil biotic and abiotic properties differed between carcass and control (“Location”), bison and elk (“Species”) and days since kill (“DSK”). For this purpose, we used linear mixed effect models (LMM, “nlme” package v 3.1 – 131.1 in R v 3.4.4; Pinheiro, Bates, DebRoy, & Sarkar, 2018; R Core Team, 2019) with Location, Species, Location x Species and DSK as fixed effects. Site was included as random effect to account for the paired design. We developed a separate model for all dependent variables. All but bacterial richness, fungal richness, fungal diversity and vegetation N concentration were natural-log transformed to meet model assumptions. For each LMM, we calculated contrasts to assess the specific comparisons we were interested in with the “lsmeans” package v 2.27-62 (Lenth & Love, 2018): 1) carcass vs control, 2) carcass bison vs control bison, and 3) carcass elk vs control elk. We also tested whether we had differences between bison and elk carcasses or the sites where bison and elk were killed and included contrasts 4) carcass bison vs carcass elk and 5) control bison vs control elk.
We calculated the log response ratio (LRR = ln[carcass/control]) to obtain carcass effects for all variables for both species separately. LRR < 0 indicates higher value at control compared to carcass, LRR > 0 indicates higher values at carcass compared control. We used LRRs for visualization and to assess spatial patterns in carcass effects across YNP. For this purpose we calculated the Moran’s I statistic for each ecosystem function, soil biotic and abiotic property based on a latitude-longitude matrix with the “moran.test” function in the “spdep” package version 1.1-3 (Bivand et al., 2019).
Multivariate analyses
Rare OTUs, defined as OTUs with a low abundance of reads, were retained in multivariate methods because they only marginally influence these analyses (Gobet, Quince, & Ramette, 2010). Bray–Curtis dissimilarity matrices were generated based on square-root-transformed matrices. We used Principal Coordinate Analyses (PCoA) to assess how soil bacterial and fungal communities differed between control and carcass of bison and elk (“vegan” package v 2.5-4, Oksanen et al., 2019). We then extracted PCoA axes scores 1 and 2 and used LMM (“nlme” package) with Location, Species, Location x Species and DSK as fixed effects. Site was, again, included as random effect. We again calculated the contrasts as described above using the “lsmeans” package. We also assessed how ecosystem functions, and soil abiotic and biotic properties were related to the soil bacteria and fungi community structure associated with bison and elk control and carcasses using the “envfit” function in the “vegan” package (Oksanen et al., 2019).
Indicator species analyses were performed using the multipatt function implemented in the “indicspecies” package version 1.7.6 with 100000 permutations (De Caceres & Jansen, 2016). This step allowed to identify OTUs that led to changes in multivariate patterns between control and carcass of both bison and elk separately (De Cáceres, Legendre, & Moretti, 2010). The multipatt function uses a point biserial correlation coefficient statistical test. Indicator OTUs were defined as bacterial and fungal OTUs with more than 50 sequences, i.e., removing rare taxa and taxa with low abundances containing little indicator information (Rime et al., 2015) and that were significantly correlated with Location (p < 0.05, correlation coefficient > 0.3). A heatmap of these OTUs were generated with the vegan and ggplot2 packages. The indicator analyses were performed in R version 3.3.3 (R Core Team, 2017).

References
Abarenkov, K., Henrik Nilsson, R., Larsson, K.-H., Alexander, I. J., Eberhardt, U., Erland, S., … Kõljalg, U. (2010). The UNITE database for molecular identification of fungi – recent updates and future perspectives. New Phytologist, 186(2), 281–285. doi:10.1111/j.1469-8137.2009.03160.x
Bengtsson-Palme, J., Hartmann, M., Eriksson, K. M., Pal, C., Thorell, K., Larsson, D. G. J., & Nilsson, R. H. (2015). metaxa2: improved identification and taxonomic classification of small and large subunit rRNA in metagenomic data. Molecular Ecology Resources, 15(6), 1403–1414. doi:10.1111/1755-0998.12399
Bengtsson-Palme, J., Ryberg, M., Hartmann, M., Branco, S., Wang, Z., Godhe, A., … Nilsson, R. H. (2013). Improved software detection and extraction of ITS1 and ITS2 from ribosomal ITS sequences of fungi and other eukaryotes for analysis of environmental sequencing data. Methods in Ecology and Evolution, 4(10), 914–919. doi:10.1111/2041-210X.12073
Bivand, R., Altman, M., Anselin, L., Assuncao, R., Berke, O., Blanchet, G., … Yu, D. (2019). spdep: Spatial dependence, weighthing schemes, statistics. R package version 1.1-3.
Bump, J. K., Peterson, R. O., & Vucetich, J. A. (2009). Wolves modulate soil nutrient heterogeneity and foliar nitrogen by configuring the distribution of ungulate carcasses. Ecology, 90(11), 3159–3167.
Bump, J. K., Webster, C. R., Vucetich, J. A., Peterson, R. O., Shields, J. M., & Powers, M. D. (2009). Ungulate carcasses perforate ecological filters and create biogeochemical hotspots in forest herbaceous layers allowing trees a competitive advantage. Ecosystems, 12(6), 996–1007. doi:10.1007/s10021-009-9274-0
Danell, K., Berteaux, D., & Brathen, K. A. (2002). Effect of muskox carcasses on nitrogen concentration in tundra vegetation. Arctic, 55(4), 389392.
De Caceres, M., & Jansen, F. (2016). indicspecies: relationship between species and groups of species. R package version 1.7.6.
De Cáceres, M., Legendre, P., & Moretti, M. (2010). Improving indicator species analysis by combining groups of sites. Oikos, 119(10), 1674–1684. doi:10.1111/j.1600-0706.2010.18334.x
Edgar, R. C. (2013). UPARSE: highly accurate OTU sequences from microbial amplicon reads. Nature Methods, 10, 996.
Edgar, R. C., & Flyvbjerg, H. (2015). Error filtering, pair assembly and error correction for next-generation sequencing reads. Bioinformatics, 31(21), 3476–3482. doi:10.1093/bioinformatics/btv401
Frey, B., Niklaus, P. A., Kremer, J., Lüscher, P., & Zimmermann, S. (2011). Heavy-machinery traffic impacts methane emissions as well as methanogen abundance and community structure in oxic forest soils. Applied and Environmental Microbiology, 77(17), 6060–6068. doi:10.1128/AEM.05206-11
Frey, B., Rime, T., Phillips, M., Stierli, B., Hajdas, I., Widmer, F., & Hartmann, M. (2016). Microbial diversity in European alpine permafrost and active layers. FEMS Microbial Ecology, 92(3), fiw018.
Frossard, A., Donhauser, J., Mestrot, A., Gygax, S., Bååth, E., & Frey, B. (2018). Long- and short-term effects of mercury pollution on the soil microbiome. Soil Biology and Biochemistry, 120, 191–199. doi:https://doi.org/10.1016/j.soilbio.2018.01.028
Geremia, C., Wallen, R., & White, P. J. (2017). Status report of the Yellowstone bison population, September 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center for Resources.
Gobet, A., Quince, C., & Ramette, A. (2010). Multivariate cutoff level analysis (MultiCoLA) of large community data sets. Nucleic Acids Research, 38(15), e155–e155. doi:10.1093/nar/gkq545
Latter, P., & Howson, G. (1977). The use of cotton strips to indicate cellulose decomposition in the field. Pedobiologia, (17), 145–155.
Latter, P., & Walton, D. (1988). The cotton strip assay for cellulose decomposition studies in soil: history of the assay and development. In Cotton strip assay: an index for decomposition in soils (pp. 7–9). ITE Symposium, Institute of Terrestrial Ecology, Natural Environment Research Council, UK.
Lenth, R., & Love, J. (2018). lsmeans: least-squares means. R package version 2.27-62.
Martin, M. (2011). Cutadapt removes adapter sequences from high-throughput sequencing reads. EMBnet.Journal, 17(1), 10–12.
Meagher, M. M. (1973). The bison of Yellowstone National Park. NPS Scientific Monograph (Vol. 1). National Park Service, Yellowstone Center for Resources.
Melis, C., Selva, N., Teurlings, I., Skarpe, C., Linnell, J. D. C., & Andersen, R. (2007). Soil and vegetation nutrient response to bison carcasses in Białowieża Primeval Forest, Poland. Ecological Research, 22(5), 807–813. doi:10.1007/s11284-006-0321-4
Nikolenko, S. I., Korobeynikov, A. I., & Alekseyev, M. A. (2013). BayesHammer: Bayesian clustering for error correction in single-cell sequencing. BMC Genomics, 14(1), S7. doi:10.1186/1471-2164-14-S1-S7
Oksanen, J., Blanchet, F. G., Friendly, M., Kindt, R., Legendre, P., McGlinn, D., … Wagner, H. H. (2019). vegan: community ecology package. R package version 2.5-4.
Pinheiro, J., Bates, D., DebRoy, S., & Sarkar, D. (2018). nlme: Linear and nonlinear mixed effect models. R package version 3.1-131.1.
Quast, C., Pruesse, E., Yilmaz, P., Gerken, J., Schweer, T., Yarza, P., … Glöckner, F. O. (2013). The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research, 41(Database issue), D590–D596. doi:10.1093/nar/gks1219
Quimby, D. C., & Johnson, D. E. (1951). Weights and measurements of Rocky Mountain elk. Journal of Wildlife Management, 15, 57–62.
R Core Team. (2017). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Zurich, Switzerland.
R Core Team. (2019). R: A language and environment for statistical computing. Vienna, Austria: R Foundation for Statistical Computing.
Rime, T., Hartmann, M., Brunner, I., Widmer, F., Zeyer, J., & Frey, B. (2015). Vertical distribution of the soil microbiota along a successional gradient in a glacier forefield. Molecular Ecology, 24(5), 1091–1108. doi:10.1111/mec.13051
Risch, A. C., Jurgensen, M. F., & Frank, D. A. (2007). Effects of grazing and soil micro-climate on decomposition rates in a spatio-temporally heterogeneous grassland. Plant and Soil, 298(1–2), 191–201. doi:10.1007/s11104-007-9354-x
Schloss, P. D., Westcott, S. L., Ryabin, T., Hall, J. R., Hartmann, M., Hollister, E. B., … Weber, C. F. (2009). Introducing mothur: open-source, platform-independent, community-supported software for describing and comparing microbial communities. Applied and Environmental Microbiology, 75(23), 7537–7541. doi:10.1128/AEM.01541-09
Smith, D., Stahler, D., Cassidy, K., Stahler, E., Metz, M., Cassidy, B., … Cato, E. (2018). Yellowstone National Park wolf project annual report 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center of Resources.
Wang, Q., Garrity, G. M., Tiedje, J. M., & Cole, J. R. (2007). Naive Bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy. Applied and Environmental Microbiology, 73(16), 5261–5267. doi:10.1128/AEM.00062-07
Withington, C., & Sanford Jr., R. (2007). Decomposition rates of buried substances increase with altitude in a forest-alpine tundra ecotone. Soil Biology and Biochemistry, (39), 68–75.

Please cite this paper together with the citation for the datafile.

biogeochemical-cycling

display_name: biogeochemical-cycling

carcass

display_name: carcass

carrion

display_name: carrion

decomposition

display_name: decomposition

detritus

display_name: detritus

wolf

display_name: wolf

yellowstone

display_name: yellowstone

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Elk and bison carcasses in Yellowstone, USA


en: rain-on-snow catchment-data meteorological-data snowpack snow-hydrology

en: The file contains all data needed to run simulations with the snow cover model SNOWPACK.

mimetype: application/zip

media_type: text/plain

format: TXT

mimetype: text/plain

en: Meteorological data used to run SNOWPACK for 58 catchments in the Swiss Alps. The data consists of a 2 km grid of "virtual meteorological stations" for each catchment. It was used to simulate snow cover processes during rain-on-snow events, therefore meteorological data of each catchment contains at least one rain-on-snow event. Further information can be found in the attached readme.txt and in Würzer & Jonas et al. (2017), currently under review in Hydrological Processes.

catchment-data

display_name: catchment-data

meteorological-data

display_name: meteorological-data

rain-on-snow

display_name: rain-on-snow

snow-hydrology

display_name: snow-hydrology

snowpack

display_name: snowpack

en: Meteorological data for investigation of rain-on-snow events in 58 catchments in Switzerland


maintainer: Frank Techel

en: avalanches alps observations snow shapefile

en: Selected wet snow avalanche activity data Davos, Switzerland (2011-2014)

en: Zip archive with shapefiles for the selected wet snow avalanche polygons, including metadata.

en:
Polygons of wet snow avalanches in the Davos area, as documented by the Swiss avalanche warning service. The georeferenced outlines of the avalanches contain both the release as well as the deposit area, but without separating between both.

The dataset is a subset of the total record of 1615 avalanches classified as wet snow avalanches from October 2011 - September 2014, containing those 255 avalanches exceeding 0.0125 km^2. Every polygon comes with meta data, including the date of occurrence.

This dataset is the underlying dataset to:
Wever, N., Vera Valero, C. and Techel, F. (2018) _Coupled snow cover and avalanche dynamics simulations to evaluate wet snow avalanche activity_. Submitted to J. Geophys. Res., in review.

alps

display_name: alps

avalanches

display_name: avalanches

observations

display_name: observations

shapefile

display_name: shapefile

snow

display_name: snow


present-weather-sensor-klosters

maintainer: Maxime Hervo

title_for_slug: present-weather-sensor-klosters

en: weather precipitation visibility sensor raclets

en: Present Weather Sensor Klosters

media_type: mat

en: Present Weather sensor measuring visibility and weather type installed at Klosters.

format: SERVICE

en: A present weather sensor (Vaisala PWD22) was deployed in Klosters (LON: 9.880413, LAT: 46.869019) for weather observation, combining the functions of a forwardscatter visibility meter and a present weather sensor. Besides measuring ambient light, it detects the intensity as well as the amount of both liquid and solid precipitation. More information can be found in the [User's Manual](ftp://ftp.cmdl.noaa.gov/aerosol/doc/manuals/PWD22_Manual.pdf).

precipitation

display_name: precipitation

raclets

display_name: raclets

sensor

display_name: sensor

visibility

display_name: visibility

weather

display_name: weather


en: time-series video-encoding gridded-data geodata sentinel-2 core research-data-management raster

en: CORE Dataset (80 GB)

media_type: CORE

en: View publication in the Digital Object Repository at WSL (DORA)

media_type: HTML

format: HTML

media_type: .sh

en:
Shell script to reproduce the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software for working with CORE will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en:
Shell script to extract data from the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en:
DISCLAIMER: CORE is still in development. Interested parties are warmly invited to join common development, to comment, discuss, find bugs, etc.

Acknowledgement: The CORE format was proudly inspired by the Cloud Optimized GeoTIFF ([COG](https://www.cogeo.org/)) format, by considering how to leverage the ability of clients issuing HTTP GET range requests for a time-series of remote sensing and aerial imagery (instead of just one image).

License: The Cloud Optimized Raster Encoding (CORE) specifications are released to the public domain under a Creative Commons 1.0 CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

-----------------------

Summary:
The Cloud Optimized Raster Encoding (CORE) format is being developed for the efficient storage and management of gridded data by applying video encoding algorithms. It is mainly designed for the exchange and preservation of large time series data in environmental data repositories, while in the same time enabling more efficient workflows on the cloud. It can be applied to any large number of similar (in pixel size and image dimensions) raster data layers. CORE is not designed to replace COG but to work together with COG for a collection of many layers (e.g. by offering a fast preview of layers when switching between layers of a time series).

WARNING: Currently only applicable to RGB/Byte imagery. The final CORE specifications may probably be very different from what is written herein or CORE may not ever become productive due to a myriad of reasons (see also 'Major issues to be solved').

With this early public sharing of the format we explicitly support the Open Science agenda, which implies "shifting from the standard practices of publishing research results in scientific publications towards sharing and using all available knowledge at an earlier stage in the research process" (quote from: European Commission, Directorate General for Research and Innovation, 2016. Open innovation, open science, open to the world).

CORE Specifications:

1) a MP4 or WebM video digital multimedia container format (or any future video container playable as HTML video in major browsers)

2) a free to use or open video compression codec such as H.264, VP9, or AV1 (or any future video codec that is open sourced or free to use for end users)

Note: H.264 is currently recommended because of the wide usage with support in all major browsers, fast encoding due to acceleration in hardware (which is currently not the case for AV1 or VP9) and the fact that MPEG LA has allowed the free use for streaming video that is free to the end users. However, please note that H.264 is restricted by patents and its use in proprietary or commercial software requires the payment of royalties to [MPEG LA](https://www.mpegla.com/programs/avc-h-264/). However, when AV1 matures and accelerated hardware encoding becomes available, AV1 is expected to offer 30% to 50% smaller file size in comparison with H.264, while retaining the [same quality](https://trac.ffmpeg.org/wiki/Encode/AV1).

3) the encoding frame rate should be of one frame per second (fps) with each layer segmented in internal tiles, similar to COG, ordered by the main use case when accessing the data: either layer contiguous or tile contiguous;

Note: The internal tile arrangement should support an easy navigation inside the CORE video format, depending on the use case.

4) a CORE file is optimised for streaming with the moov atom at the beginning of the file (e.g. with -movflags faststart) and optional additional optimisations depending on the codec used (e.g. -tune fastdecode -tune zerolatency for H.264)

5) metadata tags inside the moov atom for describing and using geographic image data (that are preferably compatible with the [OGC GeoTIFF standard](https://www.ogc.org/standards/geotiff) or any future standard accepted by the geospatial community) as well as list of original file names corresponding to each CORE layer

6) it needs to encode similar source rasters (such as time series of rasters with the same extent and resolution, or different tiles of the same product; each input raster should be having the same image and pixel size)

7) it provides a mechanism for addressing and requesting overviews (lower resolution data) for a fast display in web browser depending on the map scale (currently external overviews)

Major issues to be solved:

- Internal overviews (similar to COG), by chaining lower resolution videos in the same MP4 container for fast access to overviews first); Currently, overviews are kept as separate files, as external overviews.

- Metadata encoding (how to best encode spatial extent, layer names, and so on, for each of the layer inside the series, which may have a different geographical extent, etc...; Known issues: adding too many tags with FFmpeg which are not part of the standard MP4 moov atom; metadata tags have a limited string length.

- Applicability beyond RGB/Byte datasets; defining a standard way of converting cell values from Int16/UInt16/UInt32/Int32/Float32/Float64/ data types into multi-band Byte values (and reconstructing them back to the original data type within acceptable thresholds)

Example

Notice: The provided CORE (.mp4) examples contain modified Copernicus Sentinel data [2018-2021].

For generating the CORE examples provided, 50 original Sentinel 2 (S-2) TCI data images from an area located inside Switzerland were downloaded from www.copernicus.eu, and then transformed into CORE format using ffmpeg with H.264 encoding using the [x264 library](https://www.videolan.org/developers/x264.html).

For full reproducibility, we provide the original data set and results, as well scripts for data encoding and extraction (see resources).

core

display_name: core

geodata

display_name: geodata

gridded-data

display_name: gridded-data

raster

display_name: raster

research-data-management

display_name: research-data-management

time-series

display_name: time-series

video-encoding

display_name: video-encoding


snow-drift-station-snow-and-air-data

maintainer: Benjamin Walter

title_for_slug: snow-drift-station-snow-and-air-data

en: raclets snow-depth temperature snow snow-height snow-temperature

en: Snow Depth

en: The snow depth (cm) was measured with a Lufft SHM-31 which was mounted at 1.7 m above ground. The time is given in UTC+1.

en: Relative Humidity

en: The relative humidity (%) was measured with a Campbell CS-215 at a height of 2.2 m above ground. The time is given in UTC+1.

en: Air Temperature

en: The air temperature (°C) was measured with a Campbell CS-215 which was mounted at a height of 2.2 m above ground. The time is given in UTC+1.

en: Snow Surface Temperature

en: The snow surface temperature (°C) was measured with a Campbell SI-111 at 0.7 m above ground. The time is given in UTC+1.

en: Snow and air data was monitored at Gotschnagrat (LON: 46.859 LAT: 9.849) by an infrarot radiometer (Campbell SI-111) for snow temperature (°C), a snow height sensor (Lufft SHM-31) for snow height change (cm) and a temperature and humidity sensor (Campbell CS-215) for air temperature (°C) and relative humidity (%). No filter was applied to the sensors and the smapling frequency was 1 Hz.

snow-depth

display_name: snow-depth

snow-height

display_name: snow-height

snow-temperature

display_name: snow-temperature

temperature

display_name: temperature

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow Drift Station - Snow and Air Data


en: digital-elevation-model seilaplan wms-data swiss-geodata geoinformation-system cable-yarding open-source qgis-plugin digital-planning

en: View video on youtube!

en: WMS-Layer als Hintergrundkarten laden

en:
In order to digitally plan a cable line using the QGIS plugin ‘Seilaplan’, maps with various background information are helpful. In this tutorial we show you how to obtain maps that are helpful for cable line planning, for example a national map of Switzerland at different scales, the NFI vegetation height model or the NFI forest mix rate. For this we explain what WMS datasets are and how to integrate them into QGIS. No download of large data is needed for this, only a good internet connection. Please note that the tutorial language is German!

Link for the integration of WMS data: https://wms.geo.admin.ch/

Link to the description on the Swisstopo website:
https://www.geo.admin.ch/en/geo-services/geo-services/portrayal-services-web-mapping/web-map-services-wms.html

Link to the Seilaplan website: https://seilaplan.wsl.ch

**************************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung sind verschiedene Hintergrundkarten hilfreich. In diesem Tutorialvideo zeigen wir, was WMS Daten sind und wie man diese in QGIS einbinden kann. Dafür müssen die Daten nicht heruntergeladen werden. Es braucht lediglich eine gute Internetverbindung. Für die Seillinienplanung hilfreiche Karten sind bspw. die Landeskarte der Schweiz in verschiedenen Massstäben, das Vegetationshöhenmodell LFI oder der Waldmischungsgrad LFI.

Link zur Einbindung der WMS Daten: https://wms.geo.admin.ch/

Link zur Beschreibung auf der Swisstopo Webseite: https://www.geo.admin.ch/de/geo-dienstleistungen/geodienste/darstellungsdienste-webmapping-webgis-anwendungen/web-map-services-wms.html

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

wms-data

display_name: wms-data

en: Seilaplan Tutorial: Load WMS layers as background maps


maintainer: James W. Kirchner

en: groundwater streamflow diel-cycle evapotranspiration diurnal-cycle sap-flow snowmelt ecohydrology

en: Metadata

media_type: application/pdf

en: Column descriptions for both data files, and map coordinates for all measurement locations.

format: PDF

mimetype: application/pdf

en: Daily time series

en: Daily hydrometeorological and ecohydrological time series

en: MODIS NDSI script

en: Google Earth Engine script for computing MODIS normalized difference snow index (NDSI) values and averaging them over subcatchment areas.

en: MODIS EVI2 script

en: Google Earth Engine script for computing MODIS two-band enhanced vegetation index (EVI2) values and averaging them over subcatchments.

en: 30-minute time series

en: 30-minute hydrometeorological and ecohydrological time series.

en: Subcatchment polygons

en: Subcatchment polygons for use in the Google Earth Engine scripts.

en:
Hydrometerological and ecohydrological time series from Sagehen Creek and Independence Creek, Sierra Nevada, USA, illustrating hydrological responses to daily cycles in snowmelt and evapotranspiration forcing.

Data include 30-minute time series of

- weather variables,

- sap flow fluxes,

- groundwater levels (in two riparian transects of shallow groundwater wells),

- and stream stages (at 12 sites spanning a 500-meter elevation gradient),

and daily time series of

- temperature, precipitation, and snow water equivalent at three nearby snow telemetry stations

- diel cycle index values for groundwater levels and stream stages,

- and MODIS normalized difference snow index (NDSI) and enhanced vegetation index (EVI2) values averaged over selected subcatchments.

Google Earth Engine scripts for extracting the MODIS data are also provided.

diel-cycle

display_name: diel-cycle

diurnal-cycle

display_name: diurnal-cycle

ecohydrology

display_name: ecohydrology

evapotranspiration

display_name: evapotranspiration

groundwater

display_name: groundwater

sap-flow

display_name: sap-flow

snowmelt

display_name: snowmelt

streamflow

display_name: streamflow

en: Daily cycles in solar flux, snowmelt, transpiration, groundwater, and streamflow at Sagehen and Independence Creeks, Sierra Nevada, USA


envidat-supports-open-science

maintainer: Ionut Iosifescu Enescu

title_for_slug: envidat-supports-open-science

en: wsl envidat open-science research-data-management juypter-notebooks

en: Article as PDF

en:
The article "EnviDat Supports Open Science" originally appeared in WSLintern No. 3 (2020), page 14-15 and it is republished here with permission from the WSLintern editorial team. It contains guidelines for WSL scientists about the main issues behind Open Science and how to pragmatically approach the complexities of doing Open Science with EnviDat’s support.

License: This article is released by WSL and the EnviDat team to the public domain under a Creative Commons 4.0 CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

envidat

display_name: envidat

juypter-notebooks

display_name: juypter-notebooks

open-science

display_name: open-science

research-data-management

display_name: research-data-management

wsl

display_name: wsl

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat Supports Open Science


en: danger-level warning-regions snow european-alps avalanche-forecast

en: Forecast avalanche danger level

media_type: text/csv

en: contains the highest forecast danger level (dangerLevelMax) for each day and warning region

format: CSV

mimetype: text/csv

en: shape file warning regions Alps

en:
This dataset contains the data used in the publication by Techel et al., 2018 _Spatial consistency and bias in avalanche forecasts - a case study in the European Alps_ (Nat Haz Earth Syst Sci).
For details on the data please refer to this publication.
The dataset contains the following:
- shape files for the warning regions in the Alps
- highest forecast danger level for each warning region and day

avalanche-forecast

display_name: avalanche-forecast

danger-level

display_name: danger-level

european-alps

display_name: european-alps

snow

display_name: snow

warning-regions

display_name: warning-regions

en: Forecast avalanche danger level European Alps 2011 - 2015


maintainer: Océane Hames

en: arctic-sea-ice snow-transport openfoam mosaic snow-deposition

en: MOSAiC Met City preliminary (Level 2) wind data

media_type: zip-compressed folder of csv

en:
Extract from the preliminary MOSAiC atmospheric data (Level 2) for the time period 6th to 13th of November, 2019.
This data was used to set up the fluid forcing parameters in the snowBedFoam simulations on MOSAiC sea ice. It is being published in this repository with the kind permission from Matthew Shupe and his team.
The final processed and quality controlled version of this dataset (Level 3) has not been published yet. A complete reference will be added in this description once it is released.

en: Paper Draft

media_type: PDF

en: This is the initial draft of the paper where the snowBedFoam 1.0. results are tested against Terrestrial Laser Scan (TLS) measurements of snow dynamics on Arctic sea ice (MOSAiC expedition). It highlights the numerical limitations of our model as well as the measurement uncertainties, which may occur in such extreme environments.

en: snowBedFoam 1.0.

media_type: .zip

en:
OpenFOAM-2.3.0. scripts containing the implemented Eulerian-Lagrangian snow transport model.

The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en:
snowBedFoam 1.0. is a snow transport solver implemented in the Computational Fluid Dynamics (CFD) software OpenFOAM. It is adapted from the standard multi-phase flow solver DPMFoam for application in snow-influenced environments.

To simulate aeolian snow transport, snowBedFoam 1.0. handles coupled Eulerian–Lagrangian phases, which involve a finite number of particles (snow) spread in a continuous phase (air). The snow erosion and deposition are modelled through physically-based equations such as the ones employed in the well-established LES-Lagrangian Stochastic Model (Comola and Lehning, 2017 ; Sharma et al., 2018). This modelling approach is computationally intensive and thus adapted to simulate snow movement and distribution on small scale terrain.

snowBedFoam 1.0. was tested against topographical data collected on Arctic sea ice during the MOSAiC expedition (Clemens-Sewall, 2021) . Together with atmospheric data from the MOSAiC Met City (Shupe et al., 2021) used for the fluid forcing, the model was able to accurately simulate the zones of erosion and deposition of snow along a complex ice ridge structure.

The core code of snowBedFoam 1.0. is also accessible on the WSL/SLF GitLab repository (more details in the Resources section).

arctic-sea-ice

display_name: arctic-sea-ice

mosaic

display_name: mosaic

openfoam

display_name: openfoam

snow-deposition

display_name: snow-deposition

snow-transport

display_name: snow-transport

en: snowBedFoam: an OpenFOAM Eulerian-Lagrangian solver for modelling snow transport


en: biogeography biodiversity soil-impacts pairwise-stand-comparisons forest-management

en: headers

media_type: ascii, tab separated, also as excel table

en: Description of headers for data_wohlgemuth_etal_Neobiota_2022

media_type: CSV

en: Baseline data

en: references

media_type: XLS

en: Bibliography of all references cited in data_wohlgemuth_etal_Neobiota_2022.

en: Compiled data on the impacts of seven important NNTs (Acacia dealbata, Ailanthus altissima, Eucalyptus globulus, Prunus serotina, Pseudotsuga menziesii, Quercus rubra, Robinia pseudoacacia) on physical and chemical soil and biodiversity in Europe, and summarise commonalities and differences. A total of 107 publications considered, studies referred to biodiversity attributes and soil properties: 2804 lines and 30 rows.

biodiversity

display_name: biodiversity

biogeography

display_name: biogeography

forest-management

display_name: forest-management

pairwise-stand-comparisons

display_name: pairwise-stand-comparisons

soil-impacts

display_name: soil-impacts

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Impact of non-native tree species in Europe on soil properties and biodiversity: a review


maintainer: Sven-Eric Hopf

en: fraxinus ash-dieback forest monitoring iap

en: Monitoring of ash trees as part of the Intercantonal Forest Observation Programme

media_type: .pdf

en: Packgroun information on data for the publication: Spread and Severity of Ash Dieback in Switzerland – Tree Characteristics and Landscape Features Explain Varying Mortality Probability, (Klesse et al. 2021, Front. For. Glob. Change 4:645920., doi: 10.3389/ffgc.2021.645920)

en:
In 2013, the Institute for Applied Plant Biology (IAP) started a monitoring programme to study the development and the spatial variation of the ash dieback disease with the aim to find some partially resistant European ash trees (Fraxinus excelsior).
We collaborate as co-authors for the publication: Spread and Severity of Ash Dieback in Switzerland - Tree Characteristics and Landscape Features Explain Varying Mortality Probability (Klesse et al. 2021 in frontiers)

ash-dieback

display_name: ash-dieback

forest

display_name: forest

fraxinus

display_name: fraxinus

iap

display_name: iap

monitoring

display_name: monitoring


en: precipitation aridity soil frost-change-velocity ground-temperature sdms

media_type: TIFF

en: Soil organic carbon content modified from SoilGrids

format: TIFF

media_type: tif

en: Precipitation seasonality from CHELSA

en: Soil pH modified from SoilGrids

en: Precipitation of driest quarter modified from CHELSA

en: Soil clay content modified from SoilGrids

en: Frost change frequency modified from CHELSA

en: Mean diurnal range modified from CHELSA

en: Mean annual temperature modified from CHELSA

en: The dataset contains seven environmental layers (average annual temperature, aridity [annual precipitation divided by annual potential evapotranspiration], frost change frequency, precipitation in the driest quarter, mean diurnal temperature range, and precipitation seasonality) modified from CHELSA (https://chelsa-climate.org/) and three soil layers (soil organic matter content, pH water, and clay content) modified from SoilGrids (https://soilgrids.org/).

aridity

display_name: aridity

frost-change-velocity

display_name: frost-change-velocity

ground-temperature

display_name: ground-temperature

precipitation

display_name: precipitation

sdms

display_name: sdms

soil

display_name: soil

en: Environmental layers for SDM simulations (GDPlants)


maintainer: Michael Lehning

en: snow-farming snowpack terrestrial-laser-scanning snow snow-conservation winter-tourism

en: Martell .sno

media_type: SNO

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Martell heap

en: Fluela .sno

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Flüela heap

en: HS Fluela autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903
Nodata: -9999

en: Martell .smet

media_type: SMET

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Hintermartell.

en: Fluela .smet

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Windtunnel and DAV.

en: HS Fluela spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903

en: HS Martell autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en: HS Martell spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en:
Two data sets obtained for snow farming projects (Fluela, Davos, CH and Martell, IT) in 2015.

The data set contains for each site:

* 10 cm GIS raster of snow depth calculated from terrestrial laserscanning surveys (TLS) in the end of winter season (April/May)

* 10 cm GIS raster of snow depth calculated from TLS in the end of summer season (October)

Input files for SNOWPACK model:

* .sno: snow profile at the end of winter

* .smet: meteorological data measured by weather stations in the area

For more details see Grünewald, T., Lehning, M., and Wolfsperger, F.: Snow farming: Conserving snow over the summer season, The Cryosphere Discuss., https://doi.org/10.5194/tc-2017-93, in review, 2017.

snow

display_name: snow

snow-conservation

display_name: snow-conservation

snow-farming

display_name: snow-farming

snowpack

display_name: snowpack

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

winter-tourism

display_name: winter-tourism

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snowfarming data set Davos and Martell 2015


automatic-detection-of-avalanches

maintainer: Matthias Heck

title_for_slug: automatic-detection-of-avalanches

en: seismic snow monitoring hidden-markov-model avalanche-activity

en: Results and Scripts

media_type: application/zip

en: This zip package contains the classification results, coherence results, reference data set, python scripts used for the classification and the start and end times for the pre-processed continuous seismic data. A further readme file is also include for more detailed information.

en: This dataset contains the results obtained by an automatic classification using hidden Markov models of a continuous seismic dataset. To avoid long computational times, we reduced the seismic data using pre-processing step. The start and end times of the windows used for the classification are also included in this dataset. Furthermore, an avalanche reference data set is included and the python scripts used to perform the processing steps and the classification.

avalanche-activity

display_name: avalanche-activity

hidden-markov-model

display_name: hidden-markov-model

seismic

display_name: seismic

en: Automatic detection of avalanches


en: plynlimon stable-water-isotopes tracer precipitation catchment chloride deuterium streamflow

en: Data Set Documentation

en: This file contains a documentation of the data sets, including references to other helpful documentations.

en: 7-hourly stable water istopes

media_type: text/plain

en: Data set of 7-hourly stable water isotope data measured at Carreg Wen (precipitation) and Upper Hafren (streamflow).

en: Weekly stable water isotopes

en: Data set of weekly stable water isotope data collected at Carreg Wen (precipitation) and Lower Hafren and Tanllwyth (streamflow).

en: The data base contains timeseries of stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK. One data set contains weekly stable water isotope data from the Lower Hafren and Tanllwyth catchments, and the other data set contains 7-hourly stable water isotope data from Upper Hafren. Both data sets also include chloride concentrations in precipitation and streamflow.

catchment

display_name: catchment

chloride

display_name: chloride

deuterium

display_name: deuterium

plynlimon

display_name: plynlimon

stable-water-isotopes

display_name: stable-water-isotopes

streamflow

display_name: streamflow

tracer

display_name: tracer

en: Stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK


en: urban-biodiversity remote-sensing honeybees urbanization sustainability pollination

en: Dataset 2

en: Dataset 2: Processed data for modelling balance urban greenspace

en: Dataset 3

media_type: .csv

en: Aggregated data on number hives, beekeeping locations and ratios

en: Dataset 1

en: Dataset 1: Processed data for urban beekeeping 2012-2018

en: Data on: (1) spatial distribution of urban beekeeping (number of hives and number of beekeeping locations) in 14 Swiss cities (Geneva, Lausanne, Biel, Neuchatel, Basel, Zurich, Chur, Luzern, St. Gallen, Winterthur, Bern, Lugano, Bellinzona, Thun) for the period 2012-2018; (2) aggregated data to model the sustainability of urban beekeeping.

honeybees

display_name: honeybees

pollination

display_name: pollination

remote-sensing

display_name: remote-sensing

sustainability

display_name: sustainability

urban-biodiversity

display_name: urban-biodiversity

urbanization

display_name: urbanization

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Challenging the sustainability of urban beekeeping: evidence from Swiss cities


maintainer: Yves Bühler

en: hazard-indication-mapping release snow avalanche ramms hazard-mapping

en: RAMMS simulations NHESS

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

en: Potential Release  Area  NHESS

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

hazard-mapping

display_name: hazard-mapping

ramms

display_name: ramms

release

display_name: release

snow

display_name: snow

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Automated Avalanche Release Area (PRA) Delineation Davos


maintainer: Yohann Chauvier

en: point-process-model target-group survey-effort cluster independent-dataset plant-species covariate-correction random-stratified-sampling background-data environmental-stratification

media_type: ZIP

en: Non-copyright data, scripts, diversity outputs

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models