en: orographic-precipitation cosmo-wrf complex-terrain precipitation-variability snow-precipitation

en: StationData

en: Snow depth maps over Dischma valley for 26 January 2016 and 9 March 2016 and snow depth differences between the two dates.

en:
The data presented here corresponds to the publication "Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain" (Gerber et al., 2018a), which investigates the precipitation variability of snow precipitation in the central northern part of the Grisons (CH) and the publication "The importance of near-surface winter precipitation processes in complex alpine terrain" (Gerber et al., 2018b). The dataset contains:

* WRFsimulations: WRF simulation output for simulations with 4x (14x) terrain smoothing with an output timestep of 30 min/5 min and horizontal grid spacings of 1350 m, 450 m, 150 m and 50 m (currently: data available upon request).
* StationData: Meteorological station data of 18 meteorological stations in the central northern part of the Grisons with 30 minute resolution for the period 1 January 2016 till 1 May 2016.
* ADS80data: Photogrammetrically determined snow depth distribution data over the Dischma valley for the 26 January 2016 and 9 March 2016. Snow heights are corrected for buildings, vegetation (> 1m), outliers, and pixles, which are obivously snow-free on the pictures (Bühler et al., 2015). In addition the snow depth differences (snow depth on 9 March 2016 minus snow depth on 26 January 2016) are provided.

For more details about the simulation and observation data, see Gerber et al., 2018 and Gerber and Sharma (2018).

Publications:

Bühler, Y., Marty, M., Egli, L., Veitinger, J., Jonas, T., Thee, P., and Ginzler, C.: Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9, 229–243, doi:10.5194/tc-9-229-2015, 2015.

Gerber, F., Besic, N., Sharma, V., Mott, R., Daniels, M., Gabella, M., Berne, A., Germann, U., and Lehning, M.: Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain, The Cryosphere, 12, 3137–3160, doi:10.5194/tc-12-3137-2018, 2018.

Gerber, F., Mott, R. and Lehning, M.: The importance of near-surface winter precipitation processes in complex alpine terrain, Journal of Hydrometeorology, accepted, 2018.

Gerber, F., and Sharma, V.: Running COSMO-WRF on very-high resolution over complex terrain. Laboratory of Cryospheric Sciences CRYOS, École Polytechnique Fédérale de Lausanne EPFL, Lausanne, Switzerland. doi:10.16904/envidat.35, 2018.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

orographic-precipitation

display_name: orographic-precipitation

precipitation-variability

display_name: precipitation-variability

snow-precipitation

display_name: snow-precipitation

education

en: Education and science

en: DISCHMEX - High-resolution WRF simulations in complex alpine terrain and station measurements


maintainer: Yohann Chauvier

en: random-stratified-sampling point-process-model survey-effort plant-species background-data environmental-stratification target-group covariate-correction cluster independent-dataset

state: active

type: dataset

media_type: ZIP

en: Non-copyright data, scripts, diversity outputs

format: ZIP

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

fr: Education, science

de: Bildung, Wissenschaft

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models


maintainer: EnviDat Support

en: hazard-mapping avalanche natural-hazard satellite snow

en: SPOT6 Avalanche outlines 24 January 2018

media_type: SHP

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset.

format: SHP

mimetype: application/zip

en:
Outlines of 18'737 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 24 January 2018. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

Abstract.
Accurate and timely information on avalanche occurrence are key for avalanche warning, crisis management and avalanche documentation. Today such information is mainly available at isolated locations provided by observers in the field. The achieved reliability considering accuracy, completeness and reliability of the reported avalanche events is limited. In this study we present the spatial continuous mapping of a large avalanche period in January 2018 covering the majority of the Swiss Alps (12’500 km2).

We tested different satellite sensors available for rapid mapping during a first avalanche period. Based on these experiences, we tasked SPOT6/7 data for data acquisition to cover the second, much larger avalanche period. We manually mapped the outlines of 18’737 individual avalanche events, applying image enhancement techniques to analyze regions in cast shadow as well as brightly illuminated ones. The resulting dataset of mapped avalanche outlines, having a unique completeness and reliability, is evaluated to produce maps of avalanche occurrence and avalanche size. We validated the mapping of the avalanche outlines using photographs acquired from helicopters just after the avalanche period.

This study demonstrates the applicability of optical, very high spatial resolution satellite data to map an exceptional avalanche period with very high completeness, accuracy and reliability over a large region. The generated avalanche data is of great value to validate avalanche bulletins, complete existing avalanche databases and for research applications by enabling meaningful statistics on important avalanche parameters.

Koordinate System: CH1903+ LV95 LN02

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow


en: urban-biodiversity sustainability remote-sensing urbanization pollination honeybees

en: Dataset 2

media_type: CSV

en: Dataset 2: Processed data for modelling balance urban greenspace

format: CSV

en: Dataset 3

media_type: .csv

en: Aggregated data on number hives, beekeeping locations and ratios

format: SERVICE

en: Dataset 1

en: Dataset 1: Processed data for urban beekeeping 2012-2018

en: Data on: (1) spatial distribution of urban beekeeping (number of hives and number of beekeeping locations) in 14 Swiss cities (Geneva, Lausanne, Biel, Neuchatel, Basel, Zurich, Chur, Luzern, St. Gallen, Winterthur, Bern, Lugano, Bellinzona, Thun) for the period 2012-2018; (2) aggregated data to model the sustainability of urban beekeeping.

honeybees

display_name: honeybees

pollination

display_name: pollination

remote-sensing

display_name: remote-sensing

sustainability

display_name: sustainability

urban-biodiversity

display_name: urban-biodiversity

urbanization

display_name: urbanization

en: Challenging the sustainability of urban beekeeping: evidence from Swiss cities


data-analysis-toolkits

title_for_slug: data-analysis-toolkits

en: statistics hypothesis-testing uncertainty error-propagation data-analysis bayesian-inference

en: Toolkit 2: quantifying data distributions using descriptive statistics

media_type: application/pdf

format: PDF

mimetype: application/pdf

en: Toolkit 11: serial correlation

en: Tools for detecting and correcting for serial correlation in analyses of time series

en: Toolkit 12: weighted averages and their uncertainties

en: There are two different ways to calculate the uncertainty of a weighted average. Software packages often don't tell you which one they are reporting, and the resulting errors can be huge.

en: Toolkit 4: confidence intervals

en: Toolkit 9: Experimentwise error rates and statistical fishing expeditions

media_type: .pdf

en: Statistical fishing expeditions, and how to avoid being misled by them

en: Toolkit 8: Hodges-Lehmann estimators

en: A quick introduction to Hodges-Lehmann estimators (nonparametric measures of effect size)

en: Toolkit 7: hypothesis testing, significance, and power

en: An overview of basic concepts -- and common pitfalls -- in statistical hypothesis testing, statistical significance, and power analysis

en: toolkit 6: averaging in nonlinear functions

en: The average of a nonlinear function will not equal the function evaluated at its average inputs (the mean of the function will differ from from the function of the mean). This toolkit shows how to estimate that averaging bias.

en: Toolkit 10: linear regression

en: An overview of the math, logic, and pitfalls of ordinary least-squares linear regression

en: Toolkit 1: graphically displaying data distributions

en: Toolkit 3: tools for transforming data

en: The ladder of powers and a few other cool transformations

en: Toolkit 5: uncertainty analysis and error propagation

en: Gaussian error propagation, monte carlo methods, and first-order, second-moment error propagation

en:
These are condensed notes covering selected key points in data analysis and statistics. They were developed by James Kirchner for the course "Analysis of Environmental Data" at Berkeley in the 1990's and 2000's. They are not intended to be comprehensive, and thus are not a substitute for a good textbook or a good education!

License: These notes are released by James Kirchner under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.

bayesian-inference

display_name: bayesian-inference

data-analysis

display_name: data-analysis

error-propagation

display_name: error-propagation

hypothesis-testing

display_name: hypothesis-testing

statistics

display_name: statistics

uncertainty

display_name: uncertainty

education

en: Education and science


maintainer: Océane Hames

en: mosaic snow-deposition snow-transport openfoam arctic-sea-ice

en: snowBedFoam 1.0.

media_type: .zip

en:
OpenFOAM-2.3.0. scripts containing the implemented Eulerian-Lagrangian snow transport model.

The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en: Paper Draft

media_type: PDF

en: This is the initial draft of the paper where the snowBedFoam 1.0. results are tested against Terrestrial Laser Scan (TLS) measurements of snow dynamics on Arctic sea ice (MOSAiC expedition). It highlights the numerical limitations of our model as well as the measurement uncertainties, which may occur in such extreme environments.

en: MOSAiC Met City preliminary (Level 2) wind data

media_type: zip-compressed folder of csv

en:
Extract from the preliminary MOSAiC atmospheric data (Level 2) for the time period 6th to 13th of November, 2019.
This data was used to set up the fluid forcing parameters in the snowBedFoam simulations on MOSAiC sea ice. It is being published in this repository with the kind permission from Matthew Shupe and his team.
The final processed and quality controlled version of this dataset (Level 3) has not been published yet. A complete reference will be added in this description once it is released.

en:
snowBedFoam 1.0. is a snow transport solver implemented in the Computational Fluid Dynamics (CFD) software OpenFOAM. It is adapted from the standard multi-phase flow solver DPMFoam for application in snow-influenced environments.

To simulate aeolian snow transport, snowBedFoam 1.0. handles coupled Eulerian–Lagrangian phases, which involve a finite number of particles (snow) spread in a continuous phase (air). The snow erosion and deposition are modelled through physically-based equations such as the ones employed in the well-established LES-Lagrangian Stochastic Model (Comola and Lehning, 2017 ; Sharma et al., 2018). This modelling approach is computationally intensive and thus adapted to simulate snow movement and distribution on small scale terrain.

snowBedFoam 1.0. was tested against topographical data collected on Arctic sea ice during the MOSAiC expedition (Clemens-Sewall, 2021) . Together with atmospheric data from the MOSAiC Met City (Shupe et al., 2021) used for the fluid forcing, the model was able to accurately simulate the zones of erosion and deposition of snow along a complex ice ridge structure.

The core code of snowBedFoam 1.0. is also accessible on the WSL/SLF GitLab repository (more details in the Resources section).

arctic-sea-ice

display_name: arctic-sea-ice

mosaic

display_name: mosaic

openfoam

display_name: openfoam

snow-deposition

display_name: snow-deposition

snow-transport

display_name: snow-transport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: snowBedFoam: an OpenFOAM Eulerian-Lagrangian solver for modelling snow transport


en: photovoltaic snow winter-energy-production albedo shortwave-radiation

en: Data Forward Scattering

en: GROUNDEYE model for multiple forward scattering in snow-covered terrain. Meteorological and topographical input data set for the Meierhofertäli near Davos, Switzerland, September 2017 - August 2018. Output data for September 2017 - August 2018 at hourly resolution and every pixel. Post-processing scripts for plotting and analysis.

en:
 Overview
We present GROUNDEYE, a new model of radiative transfer over mountainous terrain, which considers for the first time the forward scattering properties of snow.
Embedded in the surface process model Alpine3D, the new terrain radiation model GROUNDEYE receives interpolated real weather data with diffuse and direct broadband shortwave radiation for each pixel as well as a spatially variable plane albedo from the module SNOWPACK.

 Format
The GROUNDEYE model is written in c++, as is the entire environment of Alpine3d. The input and output data sets are .xlsx or .txt format, pre- and postprocessing including the generation of all figures is in .R format.

 Structure
In Data_Forward_Scattering.zip you will find all necessary data and model details to
reproduce the results of the JGR publication "How forward-scattering snow and terrain change the Alpine radiation balance with application to solar panels"

 - 	Model Input Data contains the meteorological and topographic input data sets, the BRDF, and preprocessing scripts.
 - Model Code contains the full model Alpine3d including the radiative transfer module GROUNDEYE.
 - Model Output Data contains the results of the simulation of terrain irradiance and irradiance of solar panels; hourly resolution, 1. Sptember 2017 - 31. August 2018.
 - Measurements Solar Testsite contains information and measurements of the solar testsite at the Totalp near Davos, Switzerland.
 - Postprocessing contains all R-Scripts used for the analysis and
plotting of the corresponding data.

In each of these folders you will find detailed information in
the file 'About this Folder.txt'.

albedo

display_name: albedo

photovoltaic

display_name: photovoltaic

shortwave-radiation

display_name: shortwave-radiation

snow

display_name: snow

winter-energy-production

display_name: winter-energy-production

en: Data, Code Link and Metadata on Forward Scattering of Snow at Totalp


biogas-aus-hofdunger-in-der-schweiz

title_for_slug: biogas-aus-hofdunger-in-der-schweiz

en: manure biogas switzerland bioenergy review

en: Biogas aus Hofdünger in der Schweiz

en: Ziel dieses Whitepapers ist es, Entscheidungsträgern, Verwaltungen und Stakeholdern die aktuellsten Forschungsergebnisse zur Verfügung zu stellen, um die optimale Nutzung von Bioenergie aus Hofdünger in der Schweizer Energiewende zu fördern. Zu diesem Zweck werden die Ergebnisse des Schweizer Kompetenzzentrums für Bioenergieforschung - SCCER BIOSWEET - zusammengefasst und in einem breiteren Kontext dargestellt. Wenn nichts anderes erwähnt wird, beziehen sich die Ergebnisse auf die Schweiz und im Falle der Ressourcen auf die heimischen Biomassepotenziale.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland

education

en: Education and science


maintainer: Henning Löwe

en: unconfined-compression-experiments spherical-model-snow microstructure 3d-ct-images discrete-element-modelling snow-mechanics

en: Data Structure (Python Notebook)

media_type: ipynb

en: Data Access

media_type: HTTPS

media_type: text/plain

format: TXT

mimetype: text/plain

en: Data Structure (Python Notebook - view online)

en:
For the investigation of microstructural and mechanical properties of snow unconfined compression experiments and 3D computed tomography (CT) imaging were performed on sintered rounded grain snow and spherical model snow. The spherical model snow was generated to create geometrically simplified, well-defined microstructures for calibration of numerical models, such as discrete element models (DEM) in which the microstructure is represented by spherical particles.
In the experiments, microstructural variation was created by varying the sintering time (contact size) and the density of the ice sphere samples (number of contacts). The 3D CT images allow for a complete reconstruction of the entire experimental sample (cylindrical sample dimension: diameter = 33.6 mm; height = 14 mm).

discrete-element-modelling

display_name: discrete-element-modelling

microstructure

display_name: microstructure

snow-mechanics

display_name: snow-mechanics

spherical-model-snow

display_name: spherical-model-snow

unconfined-compression-experiments

display_name: unconfined-compression-experiments

en: Unconfined compression experiments and 3D CT images of spherical model snow and RG snow samples


snow-drift-station-snow-and-air-data

maintainer: Benjamin Walter

title_for_slug: snow-drift-station-snow-and-air-data

en: raclets temperature snow snow-depth snow-temperature snow-height

en: Relative Humidity

en: The relative humidity (%) was measured with a Campbell CS-215 at a height of 2.2 m above ground. The time is given in UTC+1.

format: XLS

en: Snow Surface Temperature

en: The snow surface temperature (°C) was measured with a Campbell SI-111 at 0.7 m above ground. The time is given in UTC+1.

en: Snow Depth

en: The snow depth (cm) was measured with a Lufft SHM-31 which was mounted at 1.7 m above ground. The time is given in UTC+1.

en: Air Temperature

en: The air temperature (°C) was measured with a Campbell CS-215 which was mounted at a height of 2.2 m above ground. The time is given in UTC+1.

en: Snow and air data was monitored at Gotschnagrat (LON: 46.859 LAT: 9.849) by an infrarot radiometer (Campbell SI-111) for snow temperature (°C), a snow height sensor (Lufft SHM-31) for snow height change (cm) and a temperature and humidity sensor (Campbell CS-215) for air temperature (°C) and relative humidity (%). No filter was applied to the sensors and the smapling frequency was 1 Hz.

raclets

display_name: raclets

snow-depth

display_name: snow-depth

snow-height

display_name: snow-height

snow-temperature

display_name: snow-temperature

temperature

display_name: temperature

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow Drift Station - Snow and Air Data


ceilometer-klosters

title_for_slug: ceilometer-klosters

en: klosters raclets vertical-visibility ceilometer cloud-base-height

en: Ceilometer data Klosters

media_type: mat

en: Ceilometer installed at Klosters measuring cloud base height, cloud cover and backscatter profile. The time resolution is 30 seconds, with time given in number of days from January 0, 0000, UTC. More information on the variables in the manufacturer manual.

en: Cloud base height (m) and vertical visibility (m) were measured with the VAISALA Ceilometer CL31 in Klosters (LON: 9.880413, LAT: 46.869019). The CL31 is an instrument with constant reliability for all weather conditions and simultaneous detection of three cloud layers in heights up to 7.6 km.

ceilometer

display_name: ceilometer

cloud-base-height

display_name: cloud-base-height

klosters

display_name: klosters

vertical-visibility

display_name: vertical-visibility

education

en: Education and science

en: Ceilometer Klosters


en: video-encoding research-data-management sentinel-2 raster core gridded-data geodata time-series

media_type: .sh

en:
Shell script to extract data from the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en: View publication in the Digital Object Repository at WSL (DORA)

media_type: HTML

format: HTML

en:
Shell script to reproduce the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software for working with CORE will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en: CORE Dataset (80 GB)

media_type: CORE

en:
DISCLAIMER: CORE is still in development. Interested parties are warmly invited to join common development, to comment, discuss, find bugs, etc.

Acknowledgement: The CORE format was proudly inspired by the Cloud Optimized GeoTIFF ([COG](https://www.cogeo.org/)) format, by considering how to leverage the ability of clients issuing HTTP GET range requests for a time-series of remote sensing and aerial imagery (instead of just one image).

License: The Cloud Optimized Raster Encoding (CORE) specifications are released to the public domain under a Creative Commons 1.0 CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

-----------------------

Summary:
The Cloud Optimized Raster Encoding (CORE) format is being developed for the efficient storage and management of gridded data by applying video encoding algorithms. It is mainly designed for the exchange and preservation of large time series data in environmental data repositories, while in the same time enabling more efficient workflows on the cloud. It can be applied to any large number of similar (in pixel size and image dimensions) raster data layers. CORE is not designed to replace COG but to work together with COG for a collection of many layers (e.g. by offering a fast preview of layers when switching between layers of a time series).

WARNING: Currently only applicable to RGB/Byte imagery. The final CORE specifications may probably be very different from what is written herein or CORE may not ever become productive due to a myriad of reasons (see also 'Major issues to be solved').

With this early public sharing of the format we explicitly support the Open Science agenda, which implies "shifting from the standard practices of publishing research results in scientific publications towards sharing and using all available knowledge at an earlier stage in the research process" (quote from: European Commission, Directorate General for Research and Innovation, 2016. Open innovation, open science, open to the world).

CORE Specifications:

1) a MP4 or WebM video digital multimedia container format (or any future video container playable as HTML video in major browsers)

2) a free to use or open video compression codec such as H.264, VP9, or AV1 (or any future video codec that is open sourced or free to use for end users)

Note: H.264 is currently recommended because of the wide usage with support in all major browsers, fast encoding due to acceleration in hardware (which is currently not the case for AV1 or VP9) and the fact that MPEG LA has allowed the free use for streaming video that is free to the end users. However, please note that H.264 is restricted by patents and its use in proprietary or commercial software requires the payment of royalties to [MPEG LA](https://www.mpegla.com/programs/avc-h-264/). However, when AV1 matures and accelerated hardware encoding becomes available, AV1 is expected to offer 30% to 50% smaller file size in comparison with H.264, while retaining the [same quality](https://trac.ffmpeg.org/wiki/Encode/AV1).

3) the encoding frame rate should be of one frame per second (fps) with each layer segmented in internal tiles, similar to COG, ordered by the main use case when accessing the data: either layer contiguous or tile contiguous;

Note: The internal tile arrangement should support an easy navigation inside the CORE video format, depending on the use case.

4) a CORE file is optimised for streaming with the moov atom at the beginning of the file (e.g. with -movflags faststart) and optional additional optimisations depending on the codec used (e.g. -tune fastdecode -tune zerolatency for H.264)

5) metadata tags inside the moov atom for describing and using geographic image data (that are preferably compatible with the [OGC GeoTIFF standard](https://www.ogc.org/standards/geotiff) or any future standard accepted by the geospatial community) as well as list of original file names corresponding to each CORE layer

6) it needs to encode similar source rasters (such as time series of rasters with the same extent and resolution, or different tiles of the same product; each input raster should be having the same image and pixel size)

7) it provides a mechanism for addressing and requesting overviews (lower resolution data) for a fast display in web browser depending on the map scale (currently external overviews)

Major issues to be solved:

- Internal overviews (similar to COG), by chaining lower resolution videos in the same MP4 container for fast access to overviews first); Currently, overviews are kept as separate files, as external overviews.

- Metadata encoding (how to best encode spatial extent, layer names, and so on, for each of the layer inside the series, which may have a different geographical extent, etc...; Known issues: adding too many tags with FFmpeg which are not part of the standard MP4 moov atom; metadata tags have a limited string length.

- Applicability beyond RGB/Byte datasets; defining a standard way of converting cell values from Int16/UInt16/UInt32/Int32/Float32/Float64/ data types into multi-band Byte values (and reconstructing them back to the original data type within acceptable thresholds)

Example

Notice: The provided CORE (.mp4) examples contain modified Copernicus Sentinel data [2018-2021].

For generating the CORE examples provided, 50 original Sentinel 2 (S-2) TCI data images from an area located inside Switzerland were downloaded from www.copernicus.eu, and then transformed into CORE format using ffmpeg with H.264 encoding using the [x264 library](https://www.videolan.org/developers/x264.html).

For full reproducibility, we provide the original data set and results, as well scripts for data encoding and extraction (see resources).

core

display_name: core

geodata

display_name: geodata

gridded-data

display_name: gridded-data

raster

display_name: raster

research-data-management

display_name: research-data-management

time-series

display_name: time-series

video-encoding

display_name: video-encoding


maintainer: Francesco Comola

en: wind sand saltation cohesion snow sediment

en: Output of the model simulations

media_type: application/zip

en: Model results on granular splash and saltation process of sand and snow particles

en:
The wind-driven saltation of sand and snow shapes dunes and ripples, generates dust emission, and erodes the surface of the Antarctic ice sheet. Here, we use a model based on the discrete element method to simulate grain-flow interactions and study the effect of particle cohesion on saltation dynamics.

The data contains the model output of granular splash simulations and saltation simulations. Granular splash, the main particle entrainment process in saltation, occurs upon impact of saltating particles with the granular bed. We performed Monte Carlo simulations of granular splash for loose sand grains and for cohesive ice grains. The analysis indicate that different values of cohesion have significant effects not on the number of splashed grains, on the ejection velocity, and the rebound velocity.

In our saltation simulations, we trigger particle movement with a single splash event at the inlet section section and let the system evolve until steady state. Our results show that saltation over cohesive surfaces is difficult to initiate but easy to sustain at low wind speed. The occurrence of transport thus depends on the history of the wind speed, a phenomenon known as hysteresis. We also show that saltation over cohesive surfaces presents higher mass fluxes but requires longer distances to saturate, which increases the size of the smallest stable surface ripples. Our model results have implications for large-scale aeolian processes on Earth and Titan, where sand grains are thought to be very cohesive.

cohesion

display_name: cohesion

saltation

display_name: saltation

sand

display_name: sand

sediment

display_name: sediment

snow

display_name: snow

wind

display_name: wind

en: Saltation of cohesive granular materials


maintainer: Daniela Brito Melo

en: saltation large-eddy-simulations snow-cohesion mixed-grain-transport drifting-snow

en: Data in Figures

en: Simulation results presented in Figures 1 to 11 of the research article "Modeling snow saltattion: the effect of grain size and interparticle cohesion" in csv format.

en: LES-LSM code

en: Source code used to perform the analysis presented at the research article "Modeling snow saltation: the effect of grain size and interparticle cohesion". The source code is also available at the WSL/SLF GitLab Repository (https://gitlabext.wsl.ch/atmospheric-models/les-lsm).

en:
This dataset includes the parallel application and the main results supporting the research article "Modeling snow saltation: the effect of grain size and interparticle cohesion" published at the Journal of Geophysical Research: Atmospheres.
The code is a flow solver based on the Large Eddy Simulation (LES) technique coupled with a Lagrangian Stochastic Model (LSM). The interaction of snow particles with the bed is modeled with statistical and physically-based models for aerodynamic entrainment, rebound and splash, following the works of Groot Zwaaftink et al. (2014), Comola and Lehning (2017) and Sharma et al. (2018). This algorithm was also used by Sigmund et al. (2021) to model snow sublimation.

drifting-snow

display_name: drifting-snow

large-eddy-simulations

display_name: large-eddy-simulations

mixed-grain-transport

display_name: mixed-grain-transport

snow-cohesion

display_name: snow-cohesion

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: geoinformation-system swiss-geodata cable-yarding open-source qgis-plugin digital-planning digital-elevation-model swiss-geo-downloader seilaplan

en: Herunterladen des DHM mit SwissGeoDownloader

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. The plugin ‘Swiss Geo Downloader’, which is available for the open source geoinformation software QGIS, allows freely available Swiss geodata to be downloaded and displayed directly within QGIS. It was developed in 2021 by Patricia Moll in collaboration with the Swiss Federal Institute for Forest, Snow and Landscape Research WSL. In this tutorial we describe how to download the high accuracy elevation model ‘swissALTI3D’ with the help of the ‘Swiss Geo Downloader’ and how to use it for digital planning of a cable line with the plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to the Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link to Seilaplan website: https://seilaplan.wsl.ch

*********************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Das Plugin Swiss Geo Downloader, welches für das Open Source Geoinformationssystem QGIS zur Verfügung steht, ermöglicht frei verfügbare Schweizer Geodaten direkt innerhalb von QGIS herunterzuladen und anzuzeigen. Es wurde 2021 von Patricia Moll in Zusammenarbeit mit der eidgenössischen Forschungsanstalt Wald, Schnee und Landschaft WSL entwickelt. In diesem Tutorial beschreiben wir, wie man mit Hilfe des Swiss Geo Downloaders das hochgenaue Höhenmodell swissALTI3D herunterladen und für die Seillinienplanung mit dem Plugin Seilaplan verwenden kann.

Link zum Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link zur Seilaplan-Webseite: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geo-downloader

display_name: swiss-geo-downloader

swiss-geodata

display_name: swiss-geodata

education

en: Education and science

en: Seilaplan Tutorial: DTM download with SwissGeoDownloader


maintainer: Sofia Pagliarin

en: soil-sealing barcelona milan copernicus imperviousness urban-atlas

media_type: mpk

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

en: Information on data sources

en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas

en: Soil sealing Barcelona and Milan different territorial levels


maintainer: Marcus Schaub

en: tree-species dbh forest scots-pine swiss-forest-lab crown-condition lwf tree drought diameter-at-breast-height irrigation

en: Swiss Forest Health Inventory

media_type: text/html

mimetype: text/html

en: Site photo 1

media_type: JPEG

en: Site photo 2

en: Site photo 3

en: Shapefile	of measurement location

media_type: URL

en: Dataset

media_type: XLSX

en: Long-term Irrigation	Experiment Pfynwald homepage

en: To study the performance of mature Scots pine (_Pinus sylvestris_ L.) under chronic drought conditions in comparison to their immediate physiological response to drought release, a controlled long-term and large-scale irrigation experiment has been set up in 2003. The experiment is located in a xeric mature Scots pine forest in the Pfynwald (46° 18' N, 7° 36' E, 615 m a.s.l.) in one of the driest inner-Alpine valleys of the European Alps, the Valais (mean annual temperature: 9.2°C, annual precipitation sum: 657 mm, both 1961-1990). Tree age is on average 100 years, the top height is 10.8 m and the stand density is 730 stems ha-1 with a basal area of 27.3 m2 ha-1. The forest is described as _Erico Pinetum sylvestris_ and the soil is a shallow pararendzina characterized by low water retention. The experimental site (1.2 ha; 800 trees) is split up into eight plots of 1'000 m2 each. During April-October, irrigation is applied on four randomly selected plots with sprinklers of 1 m height at night using water from an adjacent water channel. The amount of irrigation corresponds to a supplementary rainfall of 700 mm year-1. Trees in the other four plots grow under naturally dry conditions. Soil moisture has been monitored since the beginning of the project at 3 soil depths (10, 20 and 60 cm). The crown condition of each tree is being assessed each year since 2003. Tree measurement data such as diameter at breast height, tree height, and social status were assessed in 2002, 2009 and 2014. The duration of the irrigation experiment is planned for 20 years.

crown-condition

display_name: crown-condition

dbh

display_name: dbh

diameter-at-breast-height

display_name: diameter-at-breast-height

drought

display_name: drought

forest

display_name: forest

irrigation

display_name: irrigation

lwf

display_name: lwf

scots-pine

display_name: scots-pine

swiss-forest-lab

display_name: swiss-forest-lab

tree

display_name: tree

tree-species

display_name: tree-species

en: Tree measurements 2002-2016 from the long-term irrigation experiment Pfynwald, Switzerland


maintainer: Sven-Eric Hopf

en: ash-dieback forest monitoring fraxinus iap

en: Monitoring of ash trees as part of the Intercantonal Forest Observation Programme

media_type: .pdf

en: Packgroun information on data for the publication: Spread and Severity of Ash Dieback in Switzerland – Tree Characteristics and Landscape Features Explain Varying Mortality Probability, (Klesse et al. 2021, Front. For. Glob. Change 4:645920., doi: 10.3389/ffgc.2021.645920)

en:
In 2013, the Institute for Applied Plant Biology (IAP) started a monitoring programme to study the development and the spatial variation of the ash dieback disease with the aim to find some partially resistant European ash trees (Fraxinus excelsior).
We collaborate as co-authors for the publication: Spread and Severity of Ash Dieback in Switzerland - Tree Characteristics and Landscape Features Explain Varying Mortality Probability (Klesse et al. 2021 in frontiers)

ash-dieback

display_name: ash-dieback

fraxinus

display_name: fraxinus

iap

display_name: iap

monitoring

display_name: monitoring

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: uas remote-sensing swe snow-depth snow

en: HS map Brämabül, 14. April 2015

media_type: image/tiff

en:
10 cm resolution
15 cm accuracy

format: TIFF

mimetype: image/tiff

en: .tfw file

media_type: tfw

en: coordinates for the .tif raster

en:
This snow depth map was generated 14 January 2015, close to peak of winter accumulation, applying Unmanned Aerial System digital surface models with a spatial resolution of 10 cm. The covered area is 285'000 m2 at the top of Brämabüel, 2490 m a.s.l. covering all expositions. Coordinate system: CH1903LV03.

A detailed description is given here:

Bühler, Y., Adams, M. S., Bösch, R., and Stoffel, A.: Mapping snow depth in alpine terrain with unmanned aerial systems (UASs): potential and limitations, The Cryosphere, 10, 1075-1088, 10.5194/tc-10-1075-2016, 2016.

Abstract:
Detailed information on the spatial and temporal distribution, and variability of snow depth (HS) is a crucial input for numerous applications in hydrology, climatology, ecology and avalanche research. Nowadays, snow depth distribution is usually estimated by combining point measurements from weather stations or observers in the field with spatial interpolation algorithms. However, even a dense measurement network is not able to capture the large spatial variability of snow depth in alpine terrain.
Remote sensing methods, such as laser scanning or digital photogrammetry, have recently been successfully applied to map snow depth variability at local and regional scales. However, such data acquisition is costly, if manned airplanes are involved. The effectiveness of ground-based measurements on the other hand, is often hindered by occlusions, due to the complex terrain or acute viewing angles. In this paper, we investigate the application of unmanned aerial systems (UAS), in combination with structure-from-motion photogrammetry, to map snow depth distribution. Such systems have the advantage that they are comparatively cost-effective and can be applied very flexibly to cover also otherwise inaccessible terrain. In this study we map snow depth at two different locations: a) a sheltered location at the bottom of the Flüela valley (1900 m a.s.l.) and b) an exposed location (2500 m a.s.l.) on a peak in the ski resort Jakobshorn, both in the vicinity of Davos, Switzerland. At the first test site, we monitor the ablation on three different dates. We validate the photogrammetric snow depth maps using simultaneously acquired manual snow depth measurements. The resulting snow depth values have a root mean square error (RMSE) better than 0.07 to 0.15 m on meadows and rocks and a RMSE better than 0.30 m on sections covered by bushes or tall grass. This new measurement technology opens the door for efficient, flexible, repeatable and cost effective snow depth monitoring for various applications, investigating the worlds cryosphere.

remote-sensing

display_name: remote-sensing

snow

display_name: snow

snow-depth

display_name: snow-depth

swe

display_name: swe

uas

display_name: uas

en: UAS based snow depth maps Brämabüel, Davos, CH


en: lee-side-flow-field alpine3d lidar tls preferential-deposition

en: Dataset

media_type: ZIP

en:
The data presented here corresponds to the publication "A Close-Ridge Small-Scale Atmospheric Flow Field and its Influence on Snow Accumulation" (Gerber et al., 2017), which investigates an eddy-like structure in the vicinity of the Sattelhorn in the Dischma valley (Davos Switzerland) and its influence on snow accumulation. The dataset contains:

* Alpine3D: Alpine3D snow depth grids (25 m resolution) for two simulations with and without snow redistribution.
* ARPS: 10 ARPS simulations (25 m horizontal resolution) with different model setups (wind direction, wind speed, stability).
* LiDAR: Processed LiDAR PPI (D2_PPI_1h) and RHI (D2_cross_1h) across the valley with a hourly resolution for the period 27 October 2015 01:00 - 29 October 2015c 21:00 (spatial resolution: 25 m).
* meteostations-dischma: Meteorological station data of two meteorological stations in the Dischma valley with 10 minute resolution for the period 28 October 2015 - 30 October 2015.
* TLS: Snow depth change data (m) between 28 October 2015 and 30 October 2015 based on terrestrial laser scans.

For more details about the simulation and observation data, see Gerber et al., 2017.

Publication: Gerber et al., 2017: A Close-Ridge Small-Scale Atmospheric Flow Field and its Influence on Snow Accumulation, submitted to JGR - Atmospheres.

lee-side-flow-field

display_name: lee-side-flow-field

lidar

display_name: lidar

preferential-deposition

display_name: preferential-deposition

tls

display_name: tls

en: DISCHMEX - Observations and simulations of the close-ridge small-scale atmospheric flow field and snow accumulation at Sattelhorn, Dischma valley, Davos, Switzerland.


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: davos dischma-catchment soil-moisture meteorological-measurements meteo-station

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

en: IRKIS Soil moisture measurements Davos


causal-effect-of-lup

title_for_slug: causal-effect-of-lup

en: psm-did land-use-change land-use-planning plan-evaluation annual-effect

en: causal-effect-of-lup

en:
Data.dbf contains the varibles of 1662 villages in Zhangzhou Cities
PSM_DID.R can re-produce the results

en:
Title: Does zoning contain built-up land expansion? Causal evidence from Zhangzhou City, China.

Research objective: Built-up land zoning is an imporatant policy measure of land use planning (LUP) to contain built-up land expansion in China. We used a difference-indifference model with propensity score matching to estimate the average and annual effect of built-up land zoning on built-up land expansion in Zhangzhou City, China between 2010 and 2020.

Data: Data.dbf contains the varibles of 1662 villages in Zhangzhou Cities in 1995, 2000, 2005, 2010, 2013, 2015, 2018, and 2020.
XZQDM2 is villages' unique administrative ID;
Area is the land area of village i;
Dis2water is the Euclidean distance from village i to the nearest waterbody;
Dis2coastl is the Euclidean distance from village i to the nearest coastline;
Dis2city is the the Euclidean distance from village i to the city center;
Dis2county is the the Euclidean distance from village i to the nearest county center;
Elevation is the the average elevation within village i;
Dis2road is the the Euclidean distance from village i to the nearest road;
Nei_Built_ is the the area of built-up land (Nei Built.upit) in the neighboring villages of village i in year t;
Treated is a binary variable, Treated = 1 to the villages that were partially or entirely located inside the development-permitted zones, and Treated = 0 to the villages that were entirely located outside the development-permitted zones;
Intensity is the percentage of land that was assigned to the development-permitted zones in village i;
Year represent the year in 1995, 2000, 2005, 2010, 2013, 2015, 2018, and 2020;
BuLE is the dependent variable, representing built-up land expansion in village i in year t;
Town is town' unique administrative ID.

Method: First, we employed propensity score matching to overcome the selection bias and satisfy the parallel trend
assumption. Second, we built four Difference-in-Difference models to estimate the average and annual effect.

annual-effect

display_name: annual-effect

land-use-change

display_name: land-use-change

land-use-planning

display_name: land-use-planning

plan-evaluation

display_name: plan-evaluation

psm-did

display_name: psm-did

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Causal effect of LUP


en: temperature par precipitation long-term swiss-forest-lab wind-speed meteorology relative-humidity climate-change meteo

en: Data plot of the field station (LAF)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Field station data (LAF)

media_type: text/csv

en: Data file.

mimetype: text/csv

en: Site photo of the field station (LAF)

media_type: image/jpeg

en: Site photo of the field station from the side.

mimetype: image/jpeg

en: Data plot of the forest station (LAB)

en: Site photo of the forest station (LAB)

en: Site photo of the fforest station from the side.

en: Forest station data (LAB)

en: Site aerial photo (Lausanne)

en: Site aerial photo from both Lausanne stations. Source: Google. 2016. Site aerial photo from both Lausanne stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Lausanne in Switzerland where one station is located within a natural mixed forest stand (LAB) with European beech (_Fagus sylvatica_; 160-170 yrs), European silver fir (_Abies alba_; 160-170 yrs) and Norway spruce (_Picea abies_; 160-170 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, LAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Lausanne is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Lausanne, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


maintainer: Loïc Pellissier Pellissier

en: herbivores-communities environmental-gradients elevation community-indices functional-traits alps plant-herbivore-interactions

en: Study sites

media_type: text/plain

en: Coordinates and elevation of the study sites

en: Vegetion surveys

en: Species inventories of plants

en: Orthoptera traits

en: Orthoptera functional traits (incisive mandibular strength averaged by species)

en: Nematode surveys

en: Surveys of soil nematode along elevation

en: Plant traits

en: Plant functional traits (SLA, LDMC, carbon and nitrogen content, punch strenght; averaged by species)

en: Orthoptera surveys

en: Species inventories of Orthoptera

en: Despite the common role of above- and below-ground herbivore communities in mediating ecosystem functioning, our understanding of the variation of species communities along natural gradient is largely strongly biased toward aboveground organisms. This dataset enables to study the variations in assemblages of two dominant groups of herbivores, namely, aboveground orthoptera and belowground nematodes together with their food plants. Herbivores and plant surveys were conducted in 48 natural grasslands along six elevation gradients, selected to span the major macro-climatic and environmental conditions of the Swiss Alps. It compiles herbivores and plant surveys, information on the study sites as well as plant and herbivores functional traits sought to be involved in trophic interactions and to respond to climatic variation along the elevation. Plant functional traits considered are the SLA, the LDMC, the C/N content, the punch strength (i.e. force required to pierce the leave lamina), the mandibular strength for Orthoptera insect. Data were collected during the summer 2016 and 2017.

alps

display_name: alps

community-indices

display_name: community-indices

elevation

display_name: elevation

environmental-gradients

display_name: environmental-gradients

functional-traits

display_name: functional-traits

herbivores-communities

display_name: herbivores-communities

plant-herbivore-interactions

display_name: plant-herbivore-interactions

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Above- and below-ground herbivore communities along elevation


en: air-temperature shortwave-radiation precipitation-amount humidity snow-ice-temperature longwave-radiation snow-depth wind-direction wind-speed

en: Version 3

en:
Deprecated version. Release notes:

Bug fix: in version 2, the undercatch correction was not applied correctly

Bug fix: in version 2, snow lysimeter data was missing for extended periods of time

Update: dataset extended to 2016-01-02T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: Undercatch correction

en: This document describes how the undercatch correction for the Weissfluhjoch measurement site was determined.

en: All versions

en: SNOWPACK ini file (new syntax)

en: This ini-file can be used to run SNOWPACK simulations with the WFJ data set, using the new MeteoIO Filter, Generator and Interpolation syntax.

en: Version 2

en:
Deprecated version. Release notes:

Bug fix: in v1, incoming radiation components were taken from WFJ_Gipfel station, instead of WFJ Versuchsfeld.

en: Version 6

media_type: SMET

en:
Deprecated version.

Release notes:

- Missing ISWR for 2009-09-30 and 2010-04-30 has been replaced by data from WFJ Gipfel

This dataset is the basis for the Weissfluhjoch dataset in ESM-SnowMIP (doi: http://dx.doi.org/10.16904/16).

en: Version 4

en:
Deprecated version. Release notes:

Update: dataset extended to 2016-09-02T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: SNOWPACK ini file (old syntax)

en: This ini-file can be used to run SNOWPACK simulations with the WFJ data set, using version 3.4.0 or higher.

en: Version 7 (current)

en:
Release notes:

Bug fix: in previous versions, snow lysimeter data from September 2010 onwards was erroneously reported for UTC+2, instead of UTC+1 (i.e., reported one hour later than should have been).

Update: dataset extended to 2017-07-11T00:30.

en: Version 1

en:
Deprecated version. Release notes:

First release of dataset.

en: Version 5

en:
Deprecated version. Release notes:

Update: using the incoming and outgoing short- and longwave radiation data from the new processing chain from 2010 onwards, filling also data gaps in pre-2010 data.

Update: dataset extended to 2016-10-04T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: SNOWPACK sno file

en: This sno-file can be used to run SNOWPACK simulations with the WFJ data set, using version 3.4.0 or higher.

en:
Dataset of meteorological and snowpack measurements from the automatic weather station at Weissfluhjoch, Davos, Switzerland, suitable for driving snowpack models. The dataset contains standard meteorological measurements, and additionally snowpack runoff data from a snow lysimeter. Where possible, data is quality checked and missing data are replaced from backup sensors from the measurement site itself, or (in only a few cases) from the MeteoSwiss weather station at 470 m distance and 150 m above the measurement site.

Publication
Wever, N., Schmid, L., Heilig, A., Eisen, O., Fierz, C., and Lehning, M. Verification of the multi-layer SNOWPACK model with different water transport schemes. 2015. The Cryosphere. Volume 9. 2271-2293. http://dx.doi.org/10.5194/tc-9-2271-2015.

air-temperature

display_name: air-temperature

humidity

display_name: humidity

longwave-radiation

display_name: longwave-radiation

precipitation-amount

display_name: precipitation-amount

shortwave-radiation

display_name: shortwave-radiation

snow-depth

display_name: snow-depth

snow-ice-temperature

display_name: snow-ice-temperature

wind-direction

display_name: wind-direction

en: WFJ_MOD: Meteorological and snowpack measurements from Weissfluhjoch, Davos, Switzerland


maintainer: Thorsten Bartels-Rausch

en: solution reaction metamorphism heterogeneous antarctica arctic chemistry brine snow laboratory-study alpine interface ozone

en: Acetone data

media_type: dat

en:
intensity of the acetone-water-cluster and water-cluster (as derived by a chemical ionisation mass spectrometer) with time in the carrier gas downstream of packed bed flow tube holding the snow sample or the by-pass, respectively. Time "0" denotes the time when the mass spectrometer data acquisition was started. When the carrier
gas with acetone was passed via the packed bed flow tube, that is switched from by-pass to pass the snow, acetone concentration in the carrier gas rapidly dropped due to surface adsorption and slowly recovered as the adsorption sites saturate. From this, the surface area can be obtained.

en: data list

en: Lists file names, snow sample properties, and flow settings for each data-set.

en: Ozone data

en: Trend of ozone mixing ratio ( _O3mixingRatio_ppb_ with time ( _time_s_ ) as measured downstream of the snow sample during the experiments. Time "0" denotes the time when data acquisition with ozone analyser was started. And, ozone (_nOzone_molec_per_s_ ) loss for each experiment with duration of ozone exposure ( _duration_s_ ) of ozone exposure, as derived from the ozone trends shown above. Time "0" denotes the time when the carrier gas with ozone was passed via the snow sample.

en: Data Figure 1

en: Data of published Figure

en: Matlab Data

media_type: mat

en: All data as Matlab mat file

en: Matlab Script to view and plot data

media_type: .m

en: Readme file

en: This file shows data, code, and plots.

en: Earth’s snow cover is very dynamic on diurnal time scales. The changes to the snow structure during this metamorphism have wide ranging impacts such as on avalanche formation and on the capacity of surface snow to exchange trace gases with the atmosphere. Here, we investigate the influence of dry metamorphism, which involves fluxes of water vapor, on the chemical reactivity of bromide in the snow. For this, the heterogeneous reactive loss of ozone at a concentration of 5-6E12 molecules cm-3 is investigated in artificial, shock-frozen snow samples doped with 6.2 uM sodium bromide and with varying metamorphism history. The oxidation of bromide in snow is one reaction initiating polar bromine releases and ozone depletions.

alpine

display_name: alpine

antarctica

display_name: antarctica

arctic

display_name: arctic

brine

display_name: brine

chemistry

display_name: chemistry

heterogeneous

display_name: heterogeneous

interface

display_name: interface

laboratory-study

display_name: laboratory-study

metamorphism

display_name: metamorphism

ozone

display_name: ozone

reaction

display_name: reaction

snow

display_name: snow

solution

display_name: solution

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data set on bromide oxidation by ozone in snow during metamorphism from laboratory study


maintainer: Frank Techel

en: warning-regions danger-level avalanche-forecast snow european-alps

en: shape file warning regions Alps

media_type: application/zip

en: Forecast avalanche danger level

en: contains the highest forecast danger level (dangerLevelMax) for each day and warning region

en:
This dataset contains the data used in the publication by Techel et al., 2018 _Spatial consistency and bias in avalanche forecasts - a case study in the European Alps_ (Nat Haz Earth Syst Sci).
For details on the data please refer to this publication.
The dataset contains the following:
- shape files for the warning regions in the Alps
- highest forecast danger level for each warning region and day

avalanche-forecast

display_name: avalanche-forecast

danger-level

display_name: danger-level

european-alps

display_name: european-alps

warning-regions

display_name: warning-regions

en: Forecast avalanche danger level European Alps 2011 - 2015


en: avalanche-accident-statistics long-term-trends avalanche-accident avalanche-fatalities avalanche-statistics

en: Data avalanche fatalities 1969/1970 - 2014/2015

en: The data comprises avalanche fatality data from the Alpine regions in the seven countries Austria, France, Germany, Italy, Liechtenstein, Slovenia, and Switzerland.

en:
During the last 45 years, about 100 people lost their lives in avalanches in the European Alps each year. Avalanche fatalities in settlements and on transportation corridors have considerably decreased since the 1970s. In contrast, the number of avalanche fatalities during recreational activities away from avalanche-secured terrain doubled between the 1960s and 1980s and has remained relatively stable since, despite a continuing strong increase in winter backcountry recreational activities.

Data complementing Figure 2 in:
_"Avalanche fatalities in the European Alps: long-term trends and statistics"_, by Techel, F., Jarry, F., Kronthaler, G., Mitterer, S., Nairz, P., Pavšek, M., Valt, M., and Darms, G.

Data description:
please refer to section 2 (Data and Methods) in the mentioned publication

avalanche-accident

display_name: avalanche-accident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

avalanche-statistics

display_name: avalanche-statistics

long-term-trends

display_name: long-term-trends

en: Avalanche fatalities in the European Alps (1969/1970 - 2014/2015)


en: snow-stratigraphy ice-layers snow-temperature water-front weissfluhjoch snowmicropen

en: WFJ_ICE_LAYERS dataset

en: README

en: The WFJ_ICE_LAYERS dataset contains multi-instrument snowpack measurements at high temporal resolution, which enable to monitor the formation of deep ice layers due to preferential water flow, at the Weissfluhjoch research site, Davos, Switzerland. It covers the winter 2016/2017, with a focus on the early melting season. This dataset includes traditional snowpack profiles (weekly resolution, 15/11/2016-29/05/2017), SnowMicroPen penetration resistance profiles (daily resolution, 01/02/2017-19/04/2017), snow temperatures measured at different heights in the snowpack (half-hourly resolution, 01/03/2017-15/04/2017) and the water front height derived from an upward-looking ground penetrating radar (3-hour resolution, 04/03/2017-08/04/2017). The measurements are complemented by initialization files for SNOWPACK model simulations with the ice reservoir parameterization at Weissfluhjoch for the winter 2016/2017.

ice-layers

display_name: ice-layers

snow-stratigraphy

display_name: snow-stratigraphy

snow-temperature

display_name: snow-temperature

snowmicropen

display_name: snowmicropen

water-front

display_name: water-front

weissfluhjoch

display_name: weissfluhjoch

en: WFJ_ICE_LAYERS: Multi-instrument data for monitoring deep ice layer formation in an alpine snowpack


en: consistent python antarctica cryowrf aws

media_type: .zip

en: Scripts to preprocess (and download for some databases) atmospheric weather station data. Furthermore, a list of stations and a map can be created to have an overview.

en:
There are many sources providing atmospheric weather station data for the Antarctic continent. However, variable naming, timestamps and data types are highly variable between the different sources. The published python code intends to make processing of different AWS sources from Antarctica easier. For all datasets that are taken into account variables are renamed in a consistent way. Data from different sources can then be handled in one consistent python dictionary.

The following data sources are taken into account:

* AAD: Australian Antarctic Division (https://data.aad.gov.au/aws)
* ACECRC: Antarctic Climate and Ecosystems Cooperative Research Centre by the Australian Antarctic Division
* AMRC: Antarctic Meteorological Research Center (ftp://amrc.ssec.wisc.edu/pub/aws/q1h/)
* BAS: British Antarctic Survey (ftp://ftp.bas.ac.uk/src/ANTARCTIC_METEOROLOGICAL_DATA/AWS/; https://legacy.bas.ac.uk/met/READER/ANTARCTIC_METEOROLOGICAL_DATA/)
* CLIMANTARTIDE: Antarctic Meteo-Climatological Observatory by the italian National Programme of Antarctic Research (https://www.climantartide.it/dataaccess/index.php?lang=en)
* IMAU: Institute for Marine and Atmospheric research Utrecht (Lazzara et al., 2012), https://www.projects.science.uu.nl/iceclimate/aws/antarctica.ph
* JMA: Japan Meteorological Agency (https://www.data.jma.go.jp/antarctic/datareport/index-e.html)
* NOAA: National Oceanic and Atmospheric Administration (https://gml.noaa.gov/aftp/data/meteorology/in-situ/spo/)
* Other/AWS_PE: Princess Elisabeth (PE), KU Leuven, Prof. N. van Lipzig, personal communication
* Other/DDU_transect: Stations D-17 and D-47 (in transect between Dumont d’Urville and Dome C, Amory, 2020)
* PANGAEA: World Data Center (e.g. König-Langlo, 2012)

Important notes

* Information about data sources is available. Some downloading scripts are included in the provided code. However, users should make sure to comply with the data providers terms and conditions.
* Given changing download options of the differnent institutions the above links may not permanently work and data has to be retrieved by the user of this dataset.
* No quality control is applied in the provided preprocessing software - quality control is up to the user of the datasets. Some dataset are quality controlled by the owner.

Acknowledgements
--------------------------
We thank all the data providers for making the data publicly available or providing them upon request. Full acknowledgements can be found in Gerber et al., submitted.

References
---------------
Amory, C. (2020). “Drifting-snow statistics from multiple-year autonomous measurements in Adélie Land, East
Antarctica”. The Cryosphere, 1713–1725. doi: 10.5194/tc-14-1713-2020

Gerber, F., Sharma, V. and Lehning, M.: CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB, JGR - Atmospheres, submitted.

König-Langlo, G. (2012). “Continuous meteorological observations at Neumayer station (2011-01)”. Alfred Wegener
Institute, Helmholtz Centre for Polar and Marine Research, Bremerhaven, PANGAEA, doi: 10.1594/PANGAEA.
775173

antarctica

display_name: antarctica

aws

display_name: aws

consistent

display_name: consistent

cryowrf

display_name: cryowrf

python

display_name: python

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Preprocessing Antarctic Weather Station (AWS) data in python


maintainer: Christoph Marty

en: Aare input

media_type: application/x-tar

en: Grid input data for the 'Aare' CH2014 simulation.

mimetype: application/x-tar

en: CH2014 REPORT

en:
CH2014-Impacts: Toward Quantitative Scenarios of Climate Change Impacts in Switzerland

The CH2014-Impacts report presents the results of a concerted effort of 15 Swiss research institutions to describe impacts of climate change in Switzerland quantitatively. This dataset contributes to the Crosphere/Snowcover section.

en: Dataset

en: Datasets are grouped under experiment "Aare" and "Graubunden".Data is also made available in netCDF format. A range of tools are available to [read netCDF](http://www.unidata.ucar.edu/software/netcdf/software.html).

en: Graubunden input

en: Grid input data for the 'Graubunden' CH2014 simulation.

en:
 Overview

The CH2014-Impacts initiative is a concerted national effort to describe impacts of climate change in Switzerland quantitatively, drawing on the scientific resources available in Switzerland today. The initiative links the recently developed Swiss Climate Change Scenarios CH2011 with an evolving base of quantitative impact models. The use of a common climate data set across disciplines and research groups sets a high standard of consistency and comparability of results. Impact studies explore the wide range of climatic changes in temperature and precipitation projected in CH2011 for the 21st century, which vary with the assumed global level of greenhouse gases, the time horizon, the underlying climate model, and the geographical region within Switzerland. The differences among climate projections are considered using three greenhouse gas scenarios, three future time periods in the 21st century, and three climate uncertainty levels (Figure 1). Impacts are shown with respect to the reference period 1980-2009 of CH2011, and add to any impacts that have already emerged as a result of earlier climate change.

 Experimental Setup

Future snow cover changes are simulated with the physics-based model Alpine3D (Lehning et al., 2006). It is applied to two regions: The canton of Graubünden and the Aare catchment. These domains are modeled with a Digital Elevation Model (DEM) with a resolution of 200 m × 200 m. This defines the simulation grid that has to be filled with land cover data and downscaled meteorological input data for each cell for the time period of interest at hourly resolution. The reference data set consists of automatic weather station data. All meteorological input parameters are spatially interpolated to the simulation grid. The reference period comprises only thirteen years (1999–2012), because the number of available high elevation weather stations for earlier times is not sufficient to achieve unbiased distribution of the observations with elevation. The model uses projected temperature and precipitation changes for all greenhouse gas scenarios (A1B, A2, and RCP3PD) and CH2011 time periods (2035, 2060, and 2085).

 Data

Snow cover changes are projected to be relatively small in the near term (2035) (Figure 5.1 top), in particular at higher elevations above 2000 m asl. As shown by Bavay et al. (2013) the spread in projected snow cover for this period is greater between different climate model chains (Chapter 3) than between the reference period and the model chain exhibiting the most moderate change. In the 2085 period much larger changes with the potential to fundamentally transform the snow dominated alpine area become apparent (Figure 5.1 bottom). These changes include a shortening of the snow season by 5–9 weeks for the A1B scenario. This is roughly equivalent to an elevation shift of 400–800 m. The slight increase of winter precipitation and therefore snow fall projected in the CH2011 scenarios (with high associated uncertainty) can no longer compensate for the effect of increasing winter temperatures even at high elevations. In terms of Snow Water Equivalents (SWE), the projected reduction is up to two thirds toward the end of the century (2085). A continuous snow cover will be restricted to a shorter time period and/or to regions at increasingly high elevation. In Bern, for example, the number of days per year with at least 5 cm snow depth will decrease by 90% from now 20 days to only 2 days on average.

climate-change

display_name: climate-change

snow-depth

display_name: snow-depth

snow-water-equivalent

display_name: snow-water-equivalent

en: Alpine3D simulations of future climate scenarios CH2014


disdrometer-data-laret

maintainer: Daniel Wolfensberger

title_for_slug: disdrometer-data-laret

en: hydrometeors visibility disdrometer raclets precipitation

en: Disdrometer Data Laret

en: The zip folder contains one netCDF file per day for Laret from February 7 to March 29 2019 with a temporal resolution of 30 seconds (time in UTC). The naming convention for the files is Laret_YYYYMMDD.nc and the files include the following: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

en:
A laser optical disdrometer (Parsivel² , OTT Hydromet) was used to measure hydrometeors by extinction when passing a laser beam. The instrument can classify eight different kinds of precipitation, including rain, hail, snow, drizzle, and hybrid forms.
The dataset contains information on precipitation amount and type for the period of February 7 to March 29 2019 in Laret.

disdrometer

display_name: disdrometer

hydrometeors

display_name: hydrometeors

precipitation

display_name: precipitation

raclets

display_name: raclets

visibility

display_name: visibility


maintainer: James W. Kirchner

en: deuterium chloride stable-water-isotopes plynlimon precipitation streamflow catchment tracer

en: Data Set Documentation

en: This file contains a documentation of the data sets, including references to other helpful documentations.

en: 7-hourly stable water istopes

en: Data set of 7-hourly stable water isotope data measured at Carreg Wen (precipitation) and Upper Hafren (streamflow).

en: Weekly stable water isotopes

en: Data set of weekly stable water isotope data collected at Carreg Wen (precipitation) and Lower Hafren and Tanllwyth (streamflow).

en: The data base contains timeseries of stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK. One data set contains weekly stable water isotope data from the Lower Hafren and Tanllwyth catchments, and the other data set contains 7-hourly stable water isotope data from Upper Hafren. Both data sets also include chloride concentrations in precipitation and streamflow.

catchment

display_name: catchment

chloride

display_name: chloride

deuterium

display_name: deuterium

plynlimon

display_name: plynlimon

stable-water-isotopes

display_name: stable-water-isotopes

streamflow

display_name: streamflow

tracer

display_name: tracer

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK


en: European Snow Booklet public metadata

en:
The core of the European Snow Booklet (ESB), the country reports of 38 European countries, are based on information and metadata on snow measurements collected through a comprehensive survey, the ESB Questionnaire, between August 2017 and March 2018. The station metadata (for example location, elevation, measurement start date) from each country was provided by one or several institutions responsible for snow observations. By answering the questionnaire the contacts agreed that the information and metadata provided could be presented in the ESB. For cases where institutions indicated that information on station locations could be made publicly available, the metadata for the variables snow depth (HS), depth of snowfall (HN) and water equivalent of the snow cover (SWE), is additionally provided here for download (METADATA.xlsx).
Please note that not all institutions gave permission to publish their station metadata. This metadata has to be requested from the non-personal institution contacts provided in the METADATA.xlsx file. In some cases, however, no institutional contact is available and thus the contact of the country representative who filled in the questionnaire is used.
For current, updated station metadata we refer to the (non-personal) institutional contacts provided in METADATA.xlsx and/or the institution webpages. Note, however, that we cannot guarantee for completeness of the dataset for all countries because operational networks are prone to changes.

en: COST European Snow Booklet (ESB) - DORA Link

media_type: HTML

en: DORA Link of the COST European Snow Booklet (ESB).

en: List of authors and list of the editorial board of the European Snow Booklet

en:
Here you can find the list of all lead authors of the different chapters of the European Snow Booklet (ESB).
In addition a list of the editorial board that reviewed the ESB is given.

en: COST European Snow Booklet (ESB)

en: Please find here the web version of the COST European Snow Booklet (ESB).

en: European Snow Booklet unpublished metadata

en: The entire station metadata of all European institutions that contributed data is stored in METADATA_unpublished.xlsx. This file, however, cannot be accessed, since not all institutions gave permission to publish their station metadata. If you wish to access the metadata, please send a request to marty@slf.ch stating clearly why you want to access these metadata. NOTE: in this file ONLY station metadata (Lat/Lon/Altitude) is given, NO measured snow depth data.

en:
The European Snow Booklet (ESB) is a book of reference for snow measurements that has been produced through collaboration with many European snow practitioners and snow scientists in the framework of the European Cooperation in Science and Technology (COST) Action ES1404 “A European network for a harmonised monitoring of snow for the benefit of climate change scenarios, hydrology and numerical weather prediction (HarmoSnow)”. The ESB provides a unique collection of information about operational snow observations in the European countries and the methods used to perform basic measurements of snow on the ground: snow depth (HS), depth of snowfall (HN), water equivalent of the snow cover (SWE) and presence of snow on the ground (PSG). Information and station metadata (for example location, elevation) for these basic snow variables were collected through a comprehensive survey, the ESB questionnaire between August 2017 and March 2018. Numerous institutions of 38 European countries provided detailed information describing the status of the operational snow observations and the methods used at the time of the survey. Based on the information provided, a country report was written for each European country. Similarities and differences among the countries, that is, the choice of snow variables to be measured, the measurement principles applied, the number of stations, or the spatial and elevational station distribution are pointed out. Thus the collection of country reports demonstrates the relevance of snow measurements for each country. Thus, the intention of the ESB is to foster better knowledge transfer regarding snow measurements between the snow science and operational communities and to improve the communication of information to the general public.

For detailed information on the European countries, we refer to the ESB, which can be downloaded here (envidat.ch). Please note that the ESB is not a living document and information and station metadata are from August 2017 till March 2018, except for Latvia (metadata updated in December 2018).

depth-of-snowfall

display_name: depth-of-snowfall

harmonisation-of-snow-measurements

display_name: harmonisation-of-snow-measurements

snow-measurement-methods

display_name: snow-measurement-methods

water-equivalent-of-the-snow-cover

display_name: water-equivalent-of-the-snow-cover

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: European Snow Booklet – an Inventory of Snow Measurements in Europe


maintainer: Zhao

en: driving-factors urban-land-use planning austin land-dynamics

en: Potential driving factors of urban transformations of Austin over 25 years

en: In this study, the Austin metropolitan area, Texas, U.S., one of the fastest urban transformations and transformations regions, is selected to test the hypothesis that spatial planning and policies are important factors of urban transformations. Despite ample previous work in understanding the interactions between human and urban form transformation at specific areas, the actual interventions and outcomes of planning and policies (e.g., ‘smart growth’) on urban forms have been poorly measured. In this study, the potential influencing factors of urban transformations of Austin over 25 years were selected and collected.

austin

display_name: austin

driving-factors

display_name: driving-factors

land-dynamics

display_name: land-dynamics

planning

display_name: planning

urban-land-use

display_name: urban-land-use


en: snow-profiles failure-layer snow-stratigraphy snowpack snowpack-simulation rutschblock snow-instability

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

media_type: .csv

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en: Observed snow profiles

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en: Simulated snow profiles

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en: ReadMe

en: ReadMe file explaining data structure and content

en: DAV data set: Properties of observed snow profiles and simulated failure layers

media_type: CSV

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-instability

display_name: snow-instability

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack

display_name: snowpack

snowpack-simulation

display_name: snowpack-simulation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Observed and simulated snow profile data