maintainer: EnviDat Support

en: climate-change-impact hydrology water-temperature discharge model

en: Data access

en:
This work presents the first extensive study of climate change impacts on rivers temperature in Switzerland. Results show that even for low emissions scenarios, water temperature increase will lead to adverse effect for both ecosystems and socioeconomic sectors (such as nuclear plant cooling) throughout the 21st century. For high emissions scenarios, the effect will be worsen. This study also shows that water warming in summer will be more important in Alpine regions than in lowlands.
This material is distributed under CC BY 4.0 license (https://creativecommons.org/licenses/by/4.0/legalcode).

climate-change-impact

display_name: climate-change-impact

discharge

display_name: discharge

hydrology

display_name: hydrology

model

display_name: model

water-temperature

display_name: water-temperature

en: Dataset for: Future water temperature of rivers in Switzerland under climate change investigated with physics-based models


en: bryophyte-life-strategy liverwort functional-taxonomic-groups photobiont lichen-growth-form biodiversity bryophyte disturbance lichen functional-taxonomic-group climate-change-impact elevational-gradient climate-change endemic-species endemic lichen-growthform moss madeira-island

state: active

type: dataset

en: MadCrypto – Bryophyte and macrolichen diversity in laurel forests of Madeira

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science.

format: XLS

format: SERVICE

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science 30: 1122–1133.

The excel file contains 5 sheets:
1) Plot information
2) Bryophyte data with species specific information, separated per substrate
3) Macrolichen data with species specific information, separated per substrate
4) Bryophyte data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 2 and 4 might therefore differ slightly.
5) Macrolichen data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 3 and 5 might therefore differ slightly.

biodiversity

display_name: biodiversity

bryophyte

display_name: bryophyte

bryophyte-life-strategy

display_name: bryophyte-life-strategy

climate-change

display_name: climate-change

disturbance

display_name: disturbance

elevational-gradient

display_name: elevational-gradient

endemic

display_name: endemic

endemic-species

display_name: endemic-species

functional-taxonomic-group

display_name: functional-taxonomic-group

functional-taxonomic-groups

display_name: functional-taxonomic-groups

lichen

display_name: lichen

lichen-growth-form

display_name: lichen-growth-form

lichen-growthform

display_name: lichen-growthform

liverwort

display_name: liverwort

madeira-island

display_name: madeira-island

moss

display_name: moss

photobiont

display_name: photobiont

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester


snow-depth-mapping

maintainer: Mauro Marty

title_for_slug: snow-depth-mapping

en: aerial-imagery dsm image-matching avalanche snow-water-equivalent snow-depth snow-hydrology

en: Snow depth map 20160420

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en: Snow depth map 20160126

en:
Snow depth map generated from ADS 100 imagery (CIR). GSD of imagery = 0.16 m
Because of very diffuse light conditions at time of image acquisition the quality of the resulting snow depth values are in some regions quite poor.

media_type: application/pdf

format: PDF

mimetype: application/pdf

en: Snow depth map 20130415

en: Snow depth map generated from ADS 80 imagery (CIR). GSD of imagery = 0.25 m

en: Snow depth map 20160309

en: Snow depth map 20150415

en: Snow depth map 20100416

en: Snow depth map 20120320

en: Snow depth map 20140417

en: Snow depth map generated from ADS 100 imagery (CIR). GSD of imagery = 0.18 m

en:
The available datasets are snow depth maps with a spatial resolution of 2m generated from image matching of ADS 80/100 data. Image acquisition took place at peak of winter (time when the thickest snowpack is expected). The snow depth maps are the difference of a summer DSM from the winter DSM of the corresponding date . The summer DSM used is a product of image matching of ADS 80 data from summer 2013. In the available products buildings, vegetation and outliers were masked (set to NoData).
For the elimination of buildings the TLM layer (swisstopo) was used, because this layer might not represent exactly the
state of infrastructure at time of image acquisition, it is possible that mainly in dense settlement some buildings were not successfully masked. For the relevant area above treeline the masking of buildings showed good results. Vegetation got masked for a height above ground > 1m and was detected in a combination of summer and winter data sets. As Outliers were considered unrealistic snow depths caused by a failure of the image matching algorithm. Snow depths > 15m and smaller than < -15m were classified as outliers. Negative snow depth were kept, because of an uncertainty in image orientation accuracy. It is expected that in regions with negative snow depth also positive snow depth are underestimated by the same amount, which means that an estimation of snow volume should be carried out summing up the absolute values of snow depth (also the negative ones). For volume estimation in small regions the user has to take into account, that orientation accuracy of the images is roughly around 1-2 GSD (30cm), which propagates directly to the snow depth product. Areas which are not covered by snow got assigned a value of 0 as snow depth.

The work is published in:

Bühler, Y.; Marty, M.; Egli, L.; Veitinger, J.; Jonas, T.; Thee, P.; Ginzler, C., (2015). Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9 (1), 229-243. doi: 10.5194/tc-9-229-2015

aerial-imagery

display_name: aerial-imagery

avalanche

display_name: avalanche

dsm

display_name: dsm

image-matching

display_name: image-matching

snow-depth

display_name: snow-depth

snow-hydrology

display_name: snow-hydrology

snow-water-equivalent

display_name: snow-water-equivalent


en: natural-hazard satellite snow avalanche hazard-mapping

en: SPOT6 Avalanche outlines 24 January 2018

media_type: SHP

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset.

format: SHP

mimetype: application/zip

en:
Outlines of 18'737 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 24 January 2018. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

Abstract.
Accurate and timely information on avalanche occurrence are key for avalanche warning, crisis management and avalanche documentation. Today such information is mainly available at isolated locations provided by observers in the field. The achieved reliability considering accuracy, completeness and reliability of the reported avalanche events is limited. In this study we present the spatial continuous mapping of a large avalanche period in January 2018 covering the majority of the Swiss Alps (12’500 km2).

We tested different satellite sensors available for rapid mapping during a first avalanche period. Based on these experiences, we tasked SPOT6/7 data for data acquisition to cover the second, much larger avalanche period. We manually mapped the outlines of 18’737 individual avalanche events, applying image enhancement techniques to analyze regions in cast shadow as well as brightly illuminated ones. The resulting dataset of mapped avalanche outlines, having a unique completeness and reliability, is evaluated to produce maps of avalanche occurrence and avalanche size. We validated the mapping of the avalanche outlines using photographs acquired from helicopters just after the avalanche period.

This study demonstrates the applicability of optical, very high spatial resolution satellite data to map an exceptional avalanche period with very high completeness, accuracy and reliability over a large region. The generated avalanche data is of great value to validate avalanche bulletins, complete existing avalanche databases and for research applications by enabling meaningful statistics on important avalanche parameters.

Koordinate System: CH1903+ LV95 LN02

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow


en: orographic-precipitation climate-change cmip5 precipitation-amount air-temperature

en: Download Server

en:
Predicting future climatic conditions at high spatial resolution is essential for many applications in science. Here we present data for monthly time series of precipitation and minimum and maximum temperature for four downscaled global circulation models. We used model output statistics in combination with mechanistic downscaling (the CHELSA algorithm) to calculate mean monthly maximum and minimum temperatures, as well as monthly precipitation sums at ~5km spatial resolution globally for the years 1850-2100. We validated the performance of the downscaling algorithm by comparing model output with observed climates for the years 1950-2069.

CHELSA_cmip5_ts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

climate-change

display_name: climate-change

orographic-precipitation

display_name: orographic-precipitation

precipitation-amount

display_name: precipitation-amount

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: High resolution monthly precipitation and temperature timeseries for the period 2006-2100


tree-ring-laser-ablation-data

title_for_slug: tree-ring-laser-ablation-data

en: air-pollution tree-rings laser-ablation dendrochronology dendrochemistry

en: Laser ablation data

media_type: .csv

en:
This dataset contains the values of several chemical elements (Mg, Al, Si, S, K, Ca, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Sr, Tl, Pb, Bi) measured in the latewood of tree rings of Mongolian oak from Harbin, China, at a 5-year resolution. Due to the lack of a suitable reference material for wood, absolute concentration was not calculated, and the ratio between the chemical element and 13C was taken as proxy for the element signal.

In Harbin, one of the largest cities and most important industrial centers in northeastern China, air quality monitoring systems were built only by the end of 2015 to meet the national requirements. Thus, dendrochemical analyses could be used as a tool to complement for the lack of air quality data over longer periods of time, allowing for the reconstruction of the temporal trend of trace metals. Our main scopes were to: (a) assess the chemical composition of Quercus mongolica Fisch. ex Ledeb. tree rings from Harbin using a recently developed system of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), (b) identify the main chemical elements which
derived from air pollution and may be used as indicators over the period 1965–2020 in Harbin, while excluding those that were controlled by physiological processes in the tree, and (c) reconstruct the history of pollution in Harbin by comparing the tree-ring chemical composition of recent decades with that of previous decades, in trees growing in the highly polluted city of Harbin and in trees growing in a control site 90 km away from major pollution sources.

Briefly, the temporal trend of some elements was influenced by physiological factors, by environmental factors such as pollution, or influenced by both. Mg, K, Zn, Cu, Ni, Pb, As, Sr and Tl showed changes in pollution levels over time.

air-pollution

display_name: air-pollution

dendrochemistry

display_name: dendrochemistry

dendrochronology

display_name: dendrochronology

laser-ablation

display_name: laser-ablation

tree-rings

display_name: tree-rings

en: Tree-ring laser ablation data


maintainer: Yves Bühler

en: release avalanche hazard-indication-mapping ramms snow hazard-mapping

en: RAMMS simulations NHESS

media_type: application/zip

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

format: ZIP

en: Potential Release  Area  NHESS

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

ramms

display_name: ramms

release

display_name: release

en: Automated Avalanche Release Area (PRA) Delineation Davos


en: snow advection stable-water-isotope 18o metamorphism

en: Data files and read-me

en: raw data and micro-CT data available from contacts

en: Read-me

media_type: text/plain

en: A short description of the data contained in the zipped-file. Recommended for reading before downloading the dataset.

format: TXT

mimetype: text/plain

en:
Stable water isotopes (δ18O) obtained from snow and ice samples of polar regions are used to reconstruct past climate variability, but heat and mass transport processes can affect the isotopic composition. Here we present an experimental study on the effect on the snow isotopic composition by airflow through a snow pack in controlled laboratory conditions. The influence of isothermal and controlled temperature gradient conditions on the δ18O content in the snow and interstitial water vapor is elucidated. The observed disequilibrium between snow and vapor isotopes led to exchange of isotopes between snow and vapor under non-equilibrium processes, significantly changing the δ18O content of the snow. The type of metamorphism of the snow had a significant influence on this process.
Ebner, P. P., Steen-Larsen, H. C., Stenni, B., Schneebeli, M., and Steinfeld, A.: Experimental observation of transient δ18O interaction between snow and advective airflow under various temperature gradient conditions, The Cryosphere Discuss., https://doi.org/10.5194/tc-2017-16, accepted, 2017.

advection

display_name: advection

metamorphism

display_name: metamorphism

stable-water-isotope

display_name: stable-water-isotope

en: Experiments on stable water isotopes,  snow metamorphism, and advection


rorcc

maintainer: Tobias Wechsler

title_for_slug: rorcc

en: run-of-river-power-plants design-discharge environmental-flow climate-change hydropower

en: RoRCC

media_type: XLS

en:
The dataset “RoRCC” consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
-	metadata on the RoR power plants under consideration
-	annual and seasonal production scenarios differentiated into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)
-	annual and seasonal production loss due to environmental flow requirements
-	annual and seasonal the technical increase potential (via design discharge optimisation)
-	annual and seasonal changes in the hydrological cycle for the three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)

en:
The dataset "RoRCC" consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
1) metadata on the RoR power plants under consideration, 2) annual and seasonal production potential scenarios under into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099), 3) annual and seasonal streamflow scenarios, 4) annual and seasonal production loss due to environmental flow requirements, 5) annual and seasonal the technical increase potential (via design discharge optimisation) and 6) annual and seasonal changes in the hydrological cycle.

design-discharge

display_name: design-discharge

environmental-flow

display_name: environmental-flow

hydropower

display_name: hydropower

run-of-river-power-plants

display_name: run-of-river-power-plants

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Giulia Mazzotti

en: snow-modelling snow-distribution forest-snow snow-energy-balance forest-structure

en: Snow depth data open sites

en: Contains all snow detph data accquired at open sites nearby the forest stands during the same period.

en: Coordinates data

en: Includes coordinate information of each surveyed point (7 x 276 = 1932 forest points, 2 open areas)

en: Canopy data

en: Includes all canopy structure metrics computed at all surveyed locations

en: Meteo data to drive FSM2 model

en: Includes meteorological driving data used to run the forest snow model FSM2, processed and parsed in text files that match the format required by FSM2. Separate files are available for each field area (Laret, Drusatscha and Ischlag) and season (2012/13, 2013/14, 2014/15). Each file includes data for the period from October 1st to May 31st at hourly resolution.

en: Snow depth data forest sites

en: Contains all snow depth data acquired at all forest sites during winters 2012/13, 2013714 and 2014/15.

en: Grid point nomenclature

en: The grid structure of each forest site and the respective nomenclature applied to label individual points within each grid are outlined here.  Each point marks the location of snow depth measurements and co-located canopy structure parameters.

en:
This dataset contains all snow, canopy and meteorological data presented and used in the publication: Mazzotti, G., Essery, R., Moeser, D. & Jonas T. (2020) 'Resolving spatial variability of forest snow using an energy-balance model with a 1-layer canopy'. Water Resources Research, https://doi.org/10.1029/2019WR026129.
This publication must be cited when using this dataset.

forest-snow

display_name: forest-snow

forest-structure

display_name: forest-structure

snow-distribution

display_name: snow-distribution

snow-energy-balance

display_name: snow-energy-balance

snow-modelling

display_name: snow-modelling

en: Snow depth, canopy structure and meterorological datasets from the Davos area, Switzerland, Winters 2012/13-2014/15, used for high-resolution forest snow modelling


en: snow-stratigraphy snow-ice-temperature weisfluhjoch snow-density snow-water-equivalent

en: WFJ Snow Profiles 1999-2014

en:
Biweekly manual snow profiles from Weissfluhjoch, Davos, Switzerland.
Version: 2015-09-14T16:25

en: README

media_type: TXT

en: README file giving use metadata.

en: Dataset of manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland. Typical snow profile measurements and observations are included (temperature, density, grain size, grain type, hardness, wetness), following the guidelines of the The International Classification for Seasonal Snow on the Ground (ICSSG) [Fierz, C., Armstrong, R.L., Durand, Y., Etchevers, P., Greene, E., McClung, D.M., Nishimura, K., Satyawali, P.K. and Sokratov, S.A. 2009. The International Classification for Seasonal Snow on the Ground. IHP-VII Technical Documents in Hydrology N°83, IACS Contribution N°1, UNESCO-IHP, Paris].

snow-density

display_name: snow-density

snow-ice-temperature

display_name: snow-ice-temperature

snow-stratigraphy

display_name: snow-stratigraphy

snow-water-equivalent

display_name: snow-water-equivalent

weisfluhjoch

display_name: weisfluhjoch

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland


maintainer: Frank Techel

en: warning-regions danger-level european-alps avalanche-forecast snow

en: Forecast avalanche danger level

media_type: text/csv

en: contains the highest forecast danger level (dangerLevelMax) for each day and warning region

format: CSV

mimetype: text/csv

en: shape file warning regions Alps

en:
This dataset contains the data used in the publication by Techel et al., 2018 _Spatial consistency and bias in avalanche forecasts - a case study in the European Alps_ (Nat Haz Earth Syst Sci).
For details on the data please refer to this publication.
The dataset contains the following:
- shape files for the warning regions in the Alps
- highest forecast danger level for each warning region and day

avalanche-forecast

display_name: avalanche-forecast

danger-level

display_name: danger-level

european-alps

display_name: european-alps

snow

display_name: snow

warning-regions

display_name: warning-regions

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Forecast avalanche danger level European Alps 2011 - 2015


lidar-davos-wolfgang

maintainer: Patric Seifert

title_for_slug: lidar-davos-wolfgang

en: raclets polly lidar clouds tropos

en: Raman Lidar Davos

en: A portable Raman lidar system (Polly) from Leibnitz Institute for Tropospheric Research (Tropos) was deployed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Please use this [link](http://polly.tropos.de/?p=lidarzeit&Ort=39), to be directly forwarded to the Davos location and select the date of interest from the calendar (bold numbers). The data can be requested directly at the Polly team.

clouds

display_name: clouds

lidar

display_name: lidar

polly

display_name: polly

raclets

display_name: raclets

tropos

display_name: tropos

en: LIDAR Davos Wolfgang


en: climate-change perialpine-lakes switzerland hydrologic-and-hydrodynamic-modelling lake-level-regulation

en: Lake outflow scenarios CH2018

en: Lake outflow scenarios for Lake Walen, Lake Zurich, Lake Brienz and Lake Thun.

en: Lake water level scenarios CH2018

en: Lake water level scenarios for Lake Walen, Lake Zurich, Lake Brienz and Lake Thun.

en: Lake characteristics

media_type: XLSX

en: Lake characteristics: stage-area relation for Lake Walen, Lake Zurich, Lake Brienz and Lake Thun, stage-discharge relations for the unregulated Lake Walen and semi-regulated Lake Brienz and, lake level management rules for the two regulated lakes Zurich and Thun.

en:
The dataset "Lake_climate_change_scenarios_CH2018" provides simulation-based climate change impact scenarios for perialpine lakes in Switzerland. These transient future scenarios were produced by combining the hydrologic model PREVAH with the hydrodynamic model MIKE11 to simulate daily lake water level (Lake_water_level_scenarios_CH2018.xls) and outflow scenarios (Lake_outflow_scenarios_CH2018.xls) from 1981 to 2099, using the Swiss Climate Change Scenarios CH2018. The future scenarios contain a total of 39 model members for three Representative Concentration Pathways, RCP2.6 (concerted mitigation efforts), RCP4.5 (limited climate mitigation) and RCP8.5 (no climate mitigation measures). These scenarios result from the study titled "Lower summer lake levels in regulated perialpine lakes, caused by climate change," authored by Wechsler et al. in 2023.

The dataset emphasizes four specific Swiss lakes, each subject to different degrees of lake level management: an unregulated lake (Lake Walen), a semi-regulated lake (Lake Brienz), and two regulated lakes (Lake Zurich and Lake Thun).

In addition, the file (Lake_characteristics.xlsx) includes data used in the modeling process, encompassing the stage-area relation for the four lakes, stage-discharge relations for the unregulated and semi-regulated lakes, and lake level management rules for the two regulated lakes.

climate-change

display_name: climate-change

hydrologic-and-hydrodynamic-modelling

display_name: hydrologic-and-hydrodynamic-modelling

lake-level-regulation

display_name: lake-level-regulation

perialpine-lakes

display_name: perialpine-lakes

switzerland

display_name: switzerland


en: topography antarctica cryowrf wrf landuse

en: WPSinput

en: Input files to run the Weather Research and Forecasting model (WRF) preprocessing system WPS with REMA topography and AntarcticaLC2000 landuse data (see Documentation for details).

en: Scripts

en: Scripts to run the preprocessing to produce WRF binary tiles from REMA and AntarcticaLC2000 for topography and landuse (see Documentation for procedure).

en: Documentation

en: Documentation about how the provided dataset was produced including details to reproduce the dataset.

en:
Reference Elevation Model of Antarctica (REMA) topography and AntarcticaLC2000 landuse data
are now available as static data input for the Weather Research and Forecasting model (WRF). Topography
and landuse are made available at a spatial resolution of 1 km. This documentation describes the methods
applied to convert REMA and AntarcticaLC2000 to WRF readable format and shows how this improves
the representation of the Antarctic topography and landuse categories over coastal Antarctic regions.

antarctica

display_name: antarctica

cryowrf

display_name: cryowrf

landuse

display_name: landuse

topography

display_name: topography

wrf

display_name: wrf

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: REMA topography and AntarcticaLC2000 for WRF


en: soil-water-content landslide-early-warning soil-temperature soil-moisture soil-water-matrix-potential

en: In-situ soil moisture measurements, Trub, 2021-2022

media_type: CSV

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, as well as air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2021-Dec 2022.
Location: slope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Wasen i.E., steep slope, 2019-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, and two additional soil temperature measurements (oC), air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2019-Dec 2022.
Location: steep hillslope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Napf, 2021-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each. Meteorological variables such as air temperature or precipitation can be received from MeteoSwiss.
Time intervall: 1 hour.
Measurement period: June 2021-Dec 2022.
Location: flat terrain, meadow (official MeteoSwiss station)
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Langnau i E, 2021-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each. Meteorological variables, such as air temperature or precipitation can be received from MeteoSwiss.
Time intervall: 1 hour. Measurement period: June 2021-Dec 2022.
Location: flat terrain, meadow (measurement site of MeteoSwiss)
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Ranflüh, 2021-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, as well as air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2021-Dec 2022.
Location: hillslope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: Detailed description of soil moisture measurment sites, soil properties and sensor installations (in German)

media_type: PDF

en: In-situ soil moisture measurements, Wasen i.E., flat location, 2019-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, and two additional soil temperature measurements (oC), air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2019-Dec 2022.
Location: flat terrain, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In the context of landslide early warning research, soil moisture (e.g. volumetric soil water content and soil water potential) has been measured at six locations in the Napf-region (Emmental, central Switzerland) since April 2019. Here, we provide the hourly mean values of all sensors from all 6 locations after a comprehensive data control, filtering and aggregation (from 10-min to 1-hour values). A sub-set of these data (for the locations Wasen i.E.) has previously been published in envidat.ch at https://www.doi.org/10.16904/envidat.369 applying the same data post-processing method. The dataset is complemented with meteorological data (locally measured air temperature and precipitation) as well as soil temperature. A detailed description of the sites and measurement installations can be found in a separate report (attached with the data).

landslide-early-warning

display_name: landslide-early-warning

soil-moisture

display_name: soil-moisture

soil-temperature

display_name: soil-temperature

soil-water-content

display_name: soil-water-content

soil-water-matrix-potential

display_name: soil-water-matrix-potential

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: In-situ soil moisture measurements Napf-region 2019-2022


maintainer: Matthias Haeni

en: wind-speed relative-humidity meteorology meteo swiss-forest-lab precipitation par climate-change long-term temperature

en: Forest station data (JUB)

en: Data file.

en: Data plot of the field station (JUF)

en: Data plot of the forest station (JUB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site photo of the field station (JUF)

media_type: image/jpeg

en: Site photo of the field station from the side.

mimetype: image/jpeg

en: Site photo of the forest station (JUB)

en: Site photo of the forest station from the side.

en: Site aerial photo (Jussy)

en: Site aerial photo from both Jussy stations. Source: Google. 2016. Site aerial photo from both Jussy stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Jussy in Switzerland where one station is located within a natural broad-leaved forest stand (JUB) with sessile oak (_Quercus petrea_; 90 yrs), aspen (_Populus tremula_; 60 yrs) and European hornbeam (_Carpinus betulus_; 60 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, JUF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Jussy is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Jussy, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: soil-properties climate nutrient-addition microbial-respiration anthropogenic-management herbivore-exclusion microbial-biomass-carbon

en: Risch et al. GEB_data.xlsx

media_type: .xlsx

en:
Study sites and experimental design
We collected data from 23 sites that are part of the Nutrient Network Global Research Cooperative (NutNet, https://nutnet.umn.edu/). The mean annual air temperature (MAT) across these sites ranged from -4 to 22°C, mean annual precipitation (MAP) from 252 to 1592 mm, and elevations from 6 to 4261 m above sea level (Fig 1a, Supplementary Table S1), hence cover a wide range of climatic conditions under which grasslands occur (Fig 1b). Soil organic C concentrations ranged between 0.8 to 7.8%, soil total N concentrations between 0.1 and 0.6%, and the soil C:N ratio between 9.1 and 21.5. Soil clay content spanned from 3.0 to 35%, and soil pH from 3.4 to 7.6 (Supplementary Table S2).
At each site, the effects of nutrient addition and herbivore exclusion were tested via a randomized-block design (Borer et al., 2014). Three blocks with 10 treatment plots each were established at each site, except for the site at bldr.us (only two blocks). Each of these 10 plots was randomly assigned to a nutrient or fencing treatment. An individual plot was 5 x 5 m, divided into four 2.5 x 2.5 m subplots. Each subplot was further divided into four 1 x 1 m square sampling plots, one of which was set aside for soil sampling (Borer et al., 2014). Plots were separated by at least 1 m wide walkways. We collected soil samples from four different treatments for this study: (i) untreated control plots (Control), (ii) herbivore exclusion plots (Fence), (iii) plots fertilized with N, P, K, plus nine essential macro and micronutrients (NPK), and (iv) plots with simultaneous fertilizer addition and herbivore exclusion (NPK+Fence). The experiments were established at different times in the past, with years of treatment different among sites (2 – 9 years since start of treatment; Supplementary Table S1). For the nutrient additions, all sites applied 10 g N m-2 each year as time-release urea; 10 g P m-2 yr-1 as triple-super phosphate; 10 g K m-2 yr-1 as potassium sulfate. A micro-nutrient mix (Fe, S, Mg, Mn, Cu, Zn, B, Mo, Ca) was applied at 100 g m-2 together with K in the first year of treatments but not thereafter.
We excluded large vertebrate herbivores (Fence) by fencing two plots, one with and one without NPK additions, within each block. The fences excluded all aboveground mammalian herbivores with a body mass of over 50 g (Borer et al., 2014). At most sites, the fences were 180 cm high, and the fence contained a wire mesh (1 cm holes) for the bottom 90 cm with a 30 cm outward-facing flange stapled to the ground to exclude burrowing animals. Climbing and subterranean animals may potentially still access these plots (Borer et al., 2014). For slight modifications in fence design at a few sites see Supplementary Table S3. Most sites only had wild herbivores, although four sites were also grazed by domestic animals (Supplementary Table S1).

Collection of soil samples, soil microbial respiration, microbial biomass, and other soil properties
Each of the 23 sites received a package containing identical material from the Swiss Federal Institute for Forest, Snow and Landscape Research WSL, Switzerland to be used for sampling (Risch et al., 2015; Risch et al., 2019). We collected two soil cores of 5 cm diameter and 12 cm depth in each sampling plot and composited them to measure MR, MBC, and soil chemical properties (see below). An additional sample (5 x 12 cm) was collected to assess soil physical properties. This sample remained within a steel sampling core after collection and both ends were tightly closed with plastic caps to avoid disturbance. All soils were shipped cooled to the laboratory at (Location will be disclosed after manuscript acceptance) within a few days after collection. Soils were sampled roughly 6 weeks prior to peak biomass at each site during 2015 and 2016.
To assess MR (CO2 production) in a laboratory incubation experiment we weighed duplicate soil samples (8 g dry soil equivalent) into 50-ml Falcon tubes. No additional substrate (glucose, sugar) was added to these samples. We adjusted the soil moisture of each sample to 60% field capacity. We then placed a 15 ml plastic test tube (Semadeni 1701A) containing 7.25 ml 0.05 M NaOH over each soil sample. The test tube was fixed with a plastic rod so that it was not in contact with the soil sample. The Falcon tubes were then sealed with a screw cap and placed in an incubator under completely dark conditions at 20°C. The CO2 produced by microbial respiration was absorbed by the 0.05 M NaOH. For five weeks we measured the decrease in conductivity within the 0.05 M NaOH solution on a weekly basis with a Multimeter WTW Multi 3410 (WTW GmbH, Germany) and replaced the 0.05 M NaOH with fresh solution. We included Falcon tubes without soil samples in each incubation run as blanks to test if tubes were tight and no CO2 could enter or escape. We calibrated the relationship between conductivity reduction and NaOH absorbed as follows: 400 ml 0.05 M NaOH was placed in a beaker and its conductivity was measured with the multimeter. While stirring, air containing CO2 was blown into the solution for approximately one minute, which reacts with NaOH to form Na2CO3. After this process, conductivity was measured again. We then transferred 7.25 ml of the solution into a smaller beaker and added 1 ml of 0.1 M BaCl2 to precipitate Na2CO3 and then titrated the solution with 0.05 M HCl to determine the remaining NaOH. We then repeated these steps with the remaining solution a total of nine times and plotted the conductivities (y-axis) against the NaOH consumed (x-axis, Supplementary Fig S1). This regression line was used to infer the consumption of NaOH from the conductivity reduction in the incubation experiments and to calculate CO2 evolution during incubation. In addition, we determined the optimum concentration for the NaOH solution in series of preliminary experiments, so that the concentration was not too high to become insensitive, but also not too low so that not all NaOH reacts during incubation. We then calculated MR (mg CO2-C kg dry soil-1 h-1) as total amount of CO2 released over the 5 weeks divided by the duration of the entire incubation in hrs.
Soil microbial biomass carbon (MBC; mg C kg soil-1 ) was measured at the beginning of the experiment by measuring the maximal respiratory response to the addition of glucose solution (4 mg glucose per g soil dry weight dissolved in distilled water; substrate-induced respiration method) on approximately 5.5 g of soil (J. P. E. Anderson & Domsch, 1978; Nico Eisenhauer et al., 2018; Scheu, 1992). For this purpose we used an O2-micro-compensation apparatus (Scheu, 1992). More specifically, substrate-induced respiration was calculated from the respiratory response to D-glucose for 10 hr at 20°C. Glucose was added according to preliminary studies to saturate the catabolic enzymes of microorganisms (4 mg g soil-1 dissolved in 400 ml deionized water). The mean of the lowest three readings within the first 10 hrs (between the initial peak caused by disturbing the soil and the peak caused by microbial growth) was taken as maximum initial respiratory response (MIRR; ml O2 kg soil-1 h-1) and microbial biomass (mg C kg soil-1) was calculated as 38 x MIRR (Beck et al., 1997; Cesarz et al., 2022; Thakur et al., 2015).
The rest of the composited sample was dried at 65°C for 48 h, ground and sieved (2 mm mesh) to assess the soil pH, mineral soil total C and N and C:N ratio, and mineral soil organic C (Risch et al., 2019). The undisturbed sample was used to assess water holding capacity (WHC), bulk density (BD), and soil texture [sand, silt, clay; methods in (Risch et al., 2019)]. We used the percentage of sand and clay as an indicator of soil texture in this study. MAT (°C), MAP (mm) and temperature of the wettest quarter (°C) were obtained from www.worldclim.com (Fick & Hijmans, 2017; Hijmans, Cameron, Parra, Jones, & Jarvis, 2005). These variables were selected as they were found to be drivers of soil nutrient processes across these sites in earlier studies (Risch et al., 2020; Risch et al., 2019). Mean annual soil temperatures (MAST; °C) for the 0 to 5 cm soil layer were obtained for each site from the SoilTemp maps (J. Lembrechts et al., 2021; J. J. Lembrechts et al., 2022), global gridded modelled products of soil bioclimatic variables for the 1979-2013 period at a 1-km² resolution, based on CHELSA, ERA5 and in-situ soil temperature measurements.
Numerical calculations and statistical analyses
We calculated MMQ as MR/MBC. We corrected this measure using the average soil temperature of each site (MMQsoil). This temperature correction is necessary as incubation temperatures are usually much higher than site mean annual soil temperatures (see Xu et al. 2017). MMQsoil = MMQ x Q10(MAST – 20)/10, where Q10 was assumed to be 2 (Xu et al. 2017). See Supplementary Fig S2 for comparison of air and soil temperatures across the 23 sites as well as the incubation temperature.
Some of the explanatory variables (clay, soil organic C, C:N ratio) were skewed and were thus log-transformed prior to analyses. All continuous explanatory variables were centred and scaled to have a mean of zero and variance of one. To avoid collinearity between them we filtered them using correlation analysis (Supplementary Fig S3). From the variables that were strongly correlated (Pearson’s |r| > 0.70) (Dormann et al., 2013), we selected the ones that allowed us to minimize the number of variables (Supplementary Fig S3). Specifically, soil total N concentration, soil total C concentration, soil sand content and soil bulk density were dropped from the dataset. We then assessed how these edaphoclimatic variables are related to MMQ across our global grasslands.
For this, we used linear mixed effects models (LMMs) fitted by maximum likelihood with the lme function in the nlme package (version 3.1-153) (Pinheiro, Bates, DebRoy, & Sarkar, 2021) in R version 3.6.3. (R Core Team, 2019). We used treatment as a fixed effect and plot nested in site as random effects to assess treatment differences in MMQsoil, as well as MR, and MBC. The number of years since the treatment started was included as a fixed effect in all the initial models but was not significant and therefore not retained in the models. To assess how differences in MMQsoil were affected by environmental factors (soil, climatic properties) we again used LMMs. Soil and climatic properties were included as fixed effects and plot nested in site as random effects. We did not include interactions between environmental variables. We then used the MuMin package (Barton, 2018) (version 1.42.1) to select the best models that explained the most variation based on Akaike’s information criterion (AIC; model.avg function). We used the corrected AIC (AICc) to account for our small sample size and selected the top models that fell within 4 AICc units (delta AICc < 4) (Burnham & Anderson, 2002; Johnson & Omland, 2004). We present all our top models rather than model averages. Conditional averages are provided in the Supplementary material.
Based on findings from analyses described above and the literature, we developed a conceptual model of direct and indirect relationships between both edaphoclimatic variables and experimental treatments (Supplement Figure S4) to obtain a more holistic approach in understanding how these properties affect MMQsoil. We had data from 23 sites with 272 observations. We tested this model using structural equation modelling based on a d-sep approach (Lefcheck, 2016; Shipley, 2009). We considered those environmental drivers that were included in our top LMMs, namely temperature of the wettest quarter (T.q.wet), soil pH, water holding capacity (WHC) and soil organic C (organic C; Supplementary Figure S4). These factors were allowed to directly affect MMQsoil, and via their interactions with treatments. In addition, treatments were allowed to directly affect MMQsoil. Treatments were included as dummy variables in the model. We tested our conceptual model (Supplementary Fig S4) using the piecewiseSEM package (version 2.0.2; Lefcheck, 2016) in R 3.4.0, in which a structured set of linear models are fitted individually. This approach allowed us to account for the nested experimental design, and overcome some of the limitations of standard structural equation models, such as small sample sizes (Lefcheck, 2016; Shipley, 2009). We used the lme function of the nlme package to model response variables, including site as a random factor. Good fit of the SEM was assumed when Fisher’s C values were non-significant (p > 0.05). For all significant interactions between soil or climate variables and treatments detected in the SEMs, we calculated treatment effect sizes, i.e., the differences in MMQsoil between Control and treatments as log response ratios (LRR) and plotted these values against the climate or soil factors. The LRR were defined as log(Control/Treatment), where treatment was either Fence, NPK or NPK+Fence. To assess which of the LRR-climate or soil property relationships were significant we again used LMMs, in which soil and climatic properties were included as fixed effects and plot nested in site as random effects.

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch Anita C., Zimmermann, Stefan, Schütz, Martin, Borer, Elizabeth T., Broadbent, Arthur A.D., Caldeira, Maria C., Davies, Kendi F., Eisenhauer, Nico, Eskelinen, Anu, Fay, Philip A., Hagedorn, Frank, Knops, Johannes M.H., Lembrechts, Jonas, J., MacDougall, Andrew S., McCulley, Rebecca L., Melbourne, Brett A., Moore, Joslin L., Power, Sally A., Seabloom, Eric W., Silveira, Maria L., Virtanen, Risto, Yahdjian, Laura, Ochoa-Hueso, Raul (accepted). Drivers of the microbial metabolic quotient across global grasslands. Global Ecology and Biogeography

Please cite this paper together with the citation for the datafile.

The microbial metabolic quotient (MMQ; mg CO2-C mg MBC-1 h-1), defined as the amount of microbial CO2 respired (MR; mg CO2-C kg soil-1 h-1) per unit of microbial biomass C (MBC; mg C kg soil-1), is a key parameter for understanding the microbial regulation of the carbon (C) cycle, including soil C sequestration. Here, we experimentally tested hypotheses about the individual and interactive effects of multiple nutrient addition (NPK+micronutrients) and herbivore exclusion on MR, MBC, and MMQ across 23 sites (5 continents). Our sites encompassed a wide range of edaphoclimatic conditions, thus we assessed which edaphoclimatic variables affected MMQ the most and how they interacted with our treatments. Soils were collected in plots with established experimental treatments. MR was assessed in a five-week laboratory incubation without glucose addition, MBC via substrate-induced respiration. MMQ was calculated as MR/MBC and corrected for soil temperatures (MMQsoil). Using LMMs and SEMs, we analysed how edaphoclimatic characteristics and treatments interactively affected MMQsoil. MMQsoil was higher in locations with higher mean annual temperature, lower water holding capacity, and soil organic C concentration, but did not respond to our treatments across sites as neither MR nor MBC changed. We attributed this relative homeostasis to our treatments to the modulating influence of edaphoclimatic variables. For example, herbivore exclusion, regardless of fertilization, led to greater MMQsoil only at sites with lower soil organic C (<1.7%). Our results pinpoint the main variables related to MMQsoil across grasslands and emphasize the importance of the local edaphoclimatic conditions in controlling the response of the C cycle to anthropogenic stressors. By testing hypotheses about MMQsoil across global edaphoclimatic gradients, this work also helps to align the conflicting results of prior studies.

anthropogenic-management

display_name: anthropogenic-management

climate

display_name: climate

herbivore-exclusion

display_name: herbivore-exclusion

microbial-biomass-carbon

display_name: microbial-biomass-carbon

microbial-respiration

display_name: microbial-respiration

nutrient-addition

display_name: nutrient-addition

soil-properties

display_name: soil-properties

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: stillberg mountain-forest afforestation treeline long-term-experiment

en: Dataset V1

media_type: GDB

en: This dataset is outdated and has been replaced with an updated version (see description).

format: GDB

en: Site photo

media_type: JPEG

en: This site photo is outdated and has been replaced with an updated version (see description).

en: Documentation

media_type: DOC

en: This data documentation is outdated and has been replaced with an updated version (see description).

mimetype: application/msword

en:
 Important
This EnviDat entry is outdated. The most recent, usable version of the data can be found under the new EnviDat entry "Long-term afforestation experiment at the Alpine treeline site Stillberg, Switzerland." The entry can be found under this link <https://www.envidat.ch/dataset/afforestation-stillberg> and with this DOI 10.16904/envidat.397.

afforestation

display_name: afforestation

long-term-experiment

display_name: long-term-experiment

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline

display_name: treeline

en: Long-term treeline research dataset at Stillberg, Davos


en: reproducibility antarctica cryowrf blowing-snow surface-mass-balance

media_type: application/x-zip-compressed

en: Python scripts to reproduces figures in Gerber et al., 2022, revised

mimetype: application/x-zip-compressed

en: Processed CRYOWRF output used for the analysis and the figures in the paper.

en: Processed WRF output (run with Noah-MP land surface model) used for the analysis and the figures in the paper.

media_type: ZIP

en: Static input data from the WRF simulations (used in the python scripts in Scripts_Reproducibility).

en: Namelist and input files and information to run the WRF and CRYOWRF simulations used in the paper.

en: Python scripts to reproduces figures in Gerber et al., 2022, submitted.

en:
This dataset contains data and scripts for "CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB" (Gerber et al., submitted).

* Simulation_setup: Namelists and input information to run the simulation. Some input files need to be downloaded from Sharma et a., 2021.
* Static_input: Static topography input file of WRF (geo_em.d01).
* WRF_27km_NoahMP: Preprocessed WRF output of the simulation run with the WRF using the surface parameterization Noah-MP to reproduce the figures and results in the paper.
* WRF_27km_CRYOWRF: Preprocessed WRF output of the simulation run with CRYOWRF to reproduce the figures and results in the paper.
* Scripts_Reproducibility: Python scripts to reproduce the figures and results in the paper.

Note:

* To run some of the scripts Atmospheric Weather station data needs to be prepared using Gerber and Lehning, 2022.
* AWS data is not provided and needs to be downloaded from the corresponding databases. Please make sure to comply with the respective terms and conditions.

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

cryowrf

display_name: cryowrf

reproducibility

display_name: reproducibility

surface-mass-balance

display_name: surface-mass-balance

education

en: Education and science

en: Reproducibility dataset for CRYOWRF validation


en: intercomparison microct specific-surface-area snow icecube

en: TARTES simulations

media_type: ipynb

en: Jupyter notebook with TARTES simulations.

en: Statistics of samples

en: SMP measurement files for snow types A, B, C and D.

en: Grain survey of snow particles

en: The file contains all measurements of the artificial particles for snow types A, B, C, D and E, including the artificial particle mass in the Petri dish.

en: artificial_snow_data set

en: The file contains all micro-CT and IC measurements of the artificial snow data set. The data set was originally produced to investigate the influence of black carbon on SSA measurements.

media_type: zip-compressed folder of csv

en: The file contains all data for the plot in figure 1 of the co-located density and SSA measurement at Summit, Greenland in May 2015, conducted by Schneebeli, Proksch, Schmid.

en: IceCube and MicroCT data

en: The file contains all micro-CT and IC measurements for snow types A, B, C, D and E used in our study. All samples were processed (and stored) in a cold laboratory at -15°C.

en: Influence of black carbon on the measurement of the specific surface of snow with the near infrared method - Philipp Baumann

media_type: .pdf

en: These experiments investigate different possible errors by measuring the specific surface area (SSA) of snow with the near infrared method. The influence of black carbon on this measurement was disproved, the theory was therefore validated. It shows that sunlight has no influence on the measurement with the IceCube. Wind drift snow as thin layer on the sample can increase the measured value of the specific surface by a few percent. This could be part of the error, observed in former measurements at SLF. As reference for the measured SSA values with the near infrared method, computer tomography was used to verify the SSA values.

en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

snow

display_name: snow

specific-surface-area

display_name: specific-surface-area

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: tree-rings dwarf-shrubs treeline stillberg fertilization nitrogen-isotope

en: Data Nutrient Addition Stillberg

media_type: https

en: This link leads to the figshare repository, which contains all nutrient addition data.

en: Metadata Nutrient Addition Stillberg Experimental Design

media_type: PNG

en: Nutrient addition map of the study area with the investigated plots. Each circle (study block) contains one control plot and two plots that received NPK fertilizer corresponding to 15 (NPK15) or 30 (NPK30) kg N ha-1 a-1. Contour lines specify the elevation (m a.s.l.) in steps of 10 m.

format: PNG

en: Project Description Nutrient Addition Stillberg

media_type: HTML

en: Link to Nutrient Addition project description on the WSL website (in German).

format: HTML

en:
 Background information

The availability of nitrogen (N) and phosphorus (P) is considered to be a major factor limiting growth and productivity in terrestrial ecosystems globally. This project aimed to determine whether the growth stimulation documented in previous short‐term fertilisation trials persisted in a longer‐term study (12 years) in the treeline ecotone, and whether possible negative effects of nutrient addition offset the benefits of any growth stimulation.
Over the course of the 12 study years, NPK fertiliser corresponding to 15 or 30 kg N ha−1 a−1 was added annually to plots containing 30‐year‐old *Larix decidua* or 32‐year-old *Pinus uncinata* individuals with an understorey of mainly ericaceous dwarf shrubs. To quantify growth, annual shoot increments of trees and dwarf shrubs as well as radial growth increments of trees were measured. Nutrient concentrations in the soil were also measured and the foliar nutritional status of trees and dwarf shrubs was assessed.

 Experimental design

Over an elevation gradient of 140 m across the treeline afforestation site Stillberg, 22 locations were chosen that covered the whole range of microenvironmental conditions (*see* Nutrient addition experimental design.png). Half of the blocks included European larch (*L. decidua*) and the other half included mountain pine (*P. uncinata*). Within each block, three plantation quadrats were randomly selected as experimental plots and each plot was assigned to a control (no fertilisation) or to one of two fertiliser dose treatments (15 kg and 30 kg N ha−1 a−1). Treatments were assigned randomly but confined so that the location of fertilised plots within a block was not directly above control plots to avoid nutrient input from drainage. For details about the experiment, *see* Möhl et al (2019).

 Data description

The available datasets contain climate variables (2004-2016), nutrient isotope measurements (2010 & 2016), shrub growth measurements (2004-2016), soil parameter measurements and annual ring and shoot measurements (2004-2016). All data can be found here:
<https://figshare.com/articles/dataset/Twelve_years_of_low_nutrient_input_stimulates_growth_of_trees_and_dwarf_shrubs_in_the_treeline_ecotone/7025858>

dwarf-shrubs

display_name: dwarf-shrubs

fertilization

display_name: fertilization

nitrogen-isotope

display_name: nitrogen-isotope

tree-rings

display_name: tree-rings

education

en: Education and science

en: Nutrient addition experiment at the Alpine treeline site Stillberg, Switzerland


maintainer: Henning Löwe

en: microstructure snow-mechanics spherical-model-snow unconfined-compression-experiments discrete-element-modelling 3d-ct-images

en: Data Structure (Python Notebook - view online)

en: Data Access

media_type: HTTPS

en: Data Structure (Python Notebook)

media_type: text/plain

en:
For the investigation of microstructural and mechanical properties of snow unconfined compression experiments and 3D computed tomography (CT) imaging were performed on sintered rounded grain snow and spherical model snow. The spherical model snow was generated to create geometrically simplified, well-defined microstructures for calibration of numerical models, such as discrete element models (DEM) in which the microstructure is represented by spherical particles.
In the experiments, microstructural variation was created by varying the sintering time (contact size) and the density of the ice sphere samples (number of contacts). The 3D CT images allow for a complete reconstruction of the entire experimental sample (cylindrical sample dimension: diameter = 33.6 mm; height = 14 mm).

discrete-element-modelling

display_name: discrete-element-modelling

microstructure

display_name: microstructure

snow-mechanics

display_name: snow-mechanics

spherical-model-snow

display_name: spherical-model-snow

unconfined-compression-experiments

display_name: unconfined-compression-experiments

en: Unconfined compression experiments and 3D CT images of spherical model snow and RG snow samples


en: honeybees pollination remote-sensing urban-biodiversity sustainability urbanization

en: Dataset 3

media_type: .csv

en: Aggregated data on number hives, beekeeping locations and ratios

en: Dataset 2

media_type: CSV

en: Dataset 2: Processed data for modelling balance urban greenspace

en: Dataset 1

en: Dataset 1: Processed data for urban beekeeping 2012-2018

en: Data on: (1) spatial distribution of urban beekeeping (number of hives and number of beekeeping locations) in 14 Swiss cities (Geneva, Lausanne, Biel, Neuchatel, Basel, Zurich, Chur, Luzern, St. Gallen, Winterthur, Bern, Lugano, Bellinzona, Thun) for the period 2012-2018; (2) aggregated data to model the sustainability of urban beekeeping.

honeybees

display_name: honeybees

pollination

display_name: pollination

remote-sensing

display_name: remote-sensing

sustainability

display_name: sustainability

urban-biodiversity

display_name: urban-biodiversity

urbanization

display_name: urbanization

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Challenging the sustainability of urban beekeeping: evidence from Swiss cities


en:
Attention: this data is not updated after 2022 anymore.
This dataset contains the statistics on the number of avalanche fatalities per **calendar year** in Switzerland. The data collection commences with the beginning of the year 1937. After the completion of a hydrological year, which is the standard way avalanche fatalities are summarized in Switzerland and ends on the 30th of September, the new data is appended to the existing dataset.
If you require annual statistics per hydrological year, please download the data from here: [https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936]
The following information is contained (by column and column title):
 - year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste, away from open and secured ski runs)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)
The definitions for these four categories, as described in the guidelines to the avalanche accident database are:
tour:
activities include back-country ski, snowboard or snow-shoe touring
offpiste:
access from ski area, generally from the top of a skilift with short hiking distances
transportation.corridors (Techel et al., 2016):
people travelling or recreating on open or temporarily closed transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)
buildings (Techel et al., 2016):
people inside or just outside buildings, and workers on high alpine building sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

education

en: Education and science

en: Number of avalanche fatalities per calendar year in Switzerland since 1937


en: snowmelt soil-moisture discharge climate-change hydrology precipitation

en: Shapefile of 307 catchments in Switzerland

media_type: application/zip

en: Shapefile of the 307 medium-sized catchments in Switzerland. The "gridcode" provides the ID of the catchment used in the datafiles.

en: Daily simulated data for the reference period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the reference period 1981-2017 in mm.

en: Daily simulated data for the future period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the period 1981-2100 in mm for the 307 catchments.

en:
Daily discharge and the related hydro-meteorological variables precipitation, snowmelt, and soil moisture are provided for current (1981-2017) and for future climate conditions (1981-2100) for 307 medium-sized catchments in Switzerland. The catchments have a median catchment area of 117 km². The 307 catchments together form a set representative of the climatological conditions and runoff characteristics in Switzerland. The four variables were simulated at a daily resolution using the hydrological model PREVAH. PREVAH is a conceptual process-based model that was run in this study in its fully distributed version on a 500 m grid (Viviroli et al. 2009a). For the calibration, runoff time series from 140 mesoscale catchments covering the different runoff regimes were used. The model calibration was conducted over the period 1993-1997. Verification was performed on the period 1983-2005 using (i) volumetric deviation (Viviroli et al. 2007) and (ii) benchmark efficiency (Schäfli et al 2007) as objective functions. The calibration and validation procedures are described in detail in Köplin et al. (2010). The parameters for each model grid cell were derived by regionalizing the parameters obtained for the 140 catchments with a procedure based on ordinary kriging (Viviroli et al. 2009b, Köplin et al. 2010).
The calibrated and validated model was then driven with transient meteorological data (precipitation, temperature, radiation, and wind) representing both reference (1981-2017) and future climate conditions (2018-2099). The data were derived from the CH2018 climate scenarios (NCCS 2018) provided by the Swiss National Centre for Climate Services (NCCS). They were obtained from climate experiments produced with different climate modeling chains, consisting of a global and a regional circulation model each, within EUROCORDEX for three representative concentration pathways (RCP) emission scenarios. Downscaled output of ten climate model chains derived by quantile mapping were considered. The focus was on the chains of the EUR-11 domain with a horizontal resolution of 0.11 degrees (roughly 12.5 km). The climate model chains (GCM, RCM, RCP, and grid resolution) used are listed below:

- ICHEC-EC-EARTH	DMI-HIRHAM5	2.6	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	4.5	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	8.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	2.6	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	4.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	8.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	4.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	8.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	4.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	8.5	EUR-11

*References*:

-	Köplin, N., D. Viviroli, B. Schädler, and R. Weingartner (2010), _How does climate change affect mesoscale catchments in Switzerland? - A framework for a comprehensive assessment_, Advances in Geosciences, 27, 111-119, doi:10.5194/adgeo-27-111-2010.
-	National Centre for Climate Services (2018), CH2018 - _Climate Scenarios for Switzerland_, Tech. rep., NCCS, Zurich.
-	Schäfli, B., and H. V. Gupta (2007), _Do Nash values have value?_, Hydrological Processes, 21, 2075-2080, doi:10.1002/hyp.6825.
-	Viviroli, D., J. Gurtz, and M. Zappa (2007), _The hydrological modelling system PREVAH. Part II - Physical model description_, Geographica Bernensia, 40, 1-89.
-	Viviroli, D., M. Zappa, J. Gurtz, and R. Weingartner (2009a), _An introduction to the hydrological modelling system PREVAH and its pre- and post-processing-tools_, Environmental Modelling & Software, 24, 1209-1222, doi:10.1016/j.envsoft.2009.04.001.
-	Viviroli, D., H. Mittelbach, J. Gurtz, and R. Weingartner (2009b), _Continuous simulation for flood estimation in ungauged mesoscale catchments of Switzerland-Part II: Parameter regionalisation and flood estimation results_, Journal of Hydrology, 377 (1), 208-225, doi:10.1016/j.jhydrol.2009.08.022.

climate-change

display_name: climate-change

discharge

display_name: discharge

hydrology

display_name: hydrology

precipitation

display_name: precipitation

snowmelt

display_name: snowmelt

soil-moisture

display_name: soil-moisture

en: Simulated future discharge and climatological variables for medium-sized catchments in Switzerland


en: ecosystem-services circuit-theory urban-planning biodiversity ecological-corridors network-analysis

en: Amphibian movement resistance layers and scripts for connectivity modelling - part 2

media_type: zip-compressed folder of r scripts and data files

en: The zipped folder includes the script to create and analyse the networks from Circuitscape outputs. The subfolders “Boundaries”, “Layers”, and “Reference_net” contain files either called by the code or created in the process. The subfolder “Outputs_from_Circuitscape” contains the outputs from Circuitscape including node and branch cumulative currents in a network format.

en: Amphibian movement resistance layers and scripts for connectivity modeling - part 1

en: The zipped folder includes the script to aggregate the resistance layers into squared and hexagonal grids. The subfolders “Boundaries”, “Layers”, “Reference_grids”, and “Resistance_from_SDMs” contain files either called by the code or created in the process.The subfolder “Inputs_for_Circuitscape” contains the inputs to run Circuitscape, after doing some subsequent processing steps in QGIS (listed in the R script) with the files created with the script.

en: This data includes (1) Scripts to aggregate landscape resistance layers into squared and hexagonal grids (i.e., different representations and resolutions), (2) Input resistance layers and focal nodes in .txt format to run in Circuitscape (Python implementation v4.0.5). Circuitscape is a software tool for modeling and analyzing landscape connectivity, which simulates movement of organisms across landscapes by estimating resistance to movement across each point of the landscape. (3) Scripts for the ecological network analysis, and (4) environmental predictors for amphibian whole-life cycle habitats used to describe the local environment for BGI design (i.e. topographic, hydrologic, edaphic, vegetation, land-use derived, movement-ecology related).

biodiversity

display_name: biodiversity

circuit-theory

display_name: circuit-theory

ecological-corridors

display_name: ecological-corridors

ecosystem-services

display_name: ecosystem-services

network-analysis

display_name: network-analysis

urban-planning

display_name: urban-planning

en: Multi-Scale Prioritization framework for Urban Blue-Green Infrastructure Planning to Support Biodiversity: Data & Codes


en: snow-water-equivalent natural-climate-variability climate-change-impact cryosphere rain-on-snow uncertainty

en: climate realizations

en: The dataset contains for three variables (snow water equivalent, surface water input and liquid precipitation) 50 realizations of current and future climate periods for two time horizons (mid end end of century), two emission senarions (RCP 4.5 and 8.5) and 10 climate model chains (all EUR11 chains within CH2018). To quantify natural climate variability for projections of snow conditions and resulting rain-on-snow (ROS) flood events, a weather generator was applied to simulate inherently consistent climate variables for multiple realizations of current and future climates at 100 m spatial and hourly temporal resolution over a 12 x 12 km high-altitude study area in the Swiss Alps. The output of the weather generator was used as input for subsequent simulations with an energy balance snow model. The data was extracted in 2021 from original model output.

climate-change-impact

display_name: climate-change-impact

cryosphere

display_name: cryosphere

natural-climate-variability

display_name: natural-climate-variability

rain-on-snow

display_name: rain-on-snow

snow-water-equivalent

display_name: snow-water-equivalent

uncertainty

display_name: uncertainty

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Multiple realizations of daily snow water equivalent, surface water input and liquid precipitation projections for mid- and late-century


maintainer: Michael Lehning

en: snow-farming snowpack terrestrial-laser-scanning winter-tourism snow-conservation snow

en: HS Fluela autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903
Nodata: -9999

en: HS Martell spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en: HS Fluela spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903

en: Martell .sno

media_type: SNO

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Martell heap

en: Fluela .sno

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Flüela heap

en: HS Martell autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en: Martell .smet

media_type: SMET

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Hintermartell.

en: Fluela .smet

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Windtunnel and DAV.

en:
Two data sets obtained for snow farming projects (Fluela, Davos, CH and Martell, IT) in 2015.

The data set contains for each site:

* 10 cm GIS raster of snow depth calculated from terrestrial laserscanning surveys (TLS) in the end of winter season (April/May)

* 10 cm GIS raster of snow depth calculated from TLS in the end of summer season (October)

Input files for SNOWPACK model:

* .sno: snow profile at the end of winter

* .smet: meteorological data measured by weather stations in the area

For more details see Grünewald, T., Lehning, M., and Wolfsperger, F.: Snow farming: Conserving snow over the summer season, The Cryosphere Discuss., https://doi.org/10.5194/tc-2017-93, in review, 2017.

snow

display_name: snow

snow-conservation

display_name: snow-conservation

snow-farming

display_name: snow-farming

snowpack

display_name: snowpack

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

winter-tourism

display_name: winter-tourism

en: Snowfarming data set Davos and Martell 2015


sensitivity-of-modeled-snow-instability

maintainer: Bettina Richter

title_for_slug: sensitivity-of-modeled-snow-instability

en: global-sensitivity-analysis snow-instability snow-cover-modeling numerical-avalanche-forecasting snowpack

en: Case SL

en: Extracted output data for case SL. Here biases were introduced to meteorological input data during the period of slab formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Reference run

en: Reference run for the sensitivity analysis at Weissfluhjoch field site for winter season 2016-2017. Meteorological data from the automatic weather stations are used. No biases were introduced to the input data.

en: Case ALL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the whole simulation period. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Case WL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the period of weak layer formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Manually observed snow profiles

en: Manually observed snow profiles at Weissfluhjoch field site for winter season 2016-2017, including layer depth, hand hardness, grain size and grain shape for each layer.

en: We investigated the sensitivity of modeled snow instability to meteorological input data using SNOWPACK. We therefore used input data from the automatic weather station at the Weissfluhjoch field site for the year 2016-2017. We investigated three scenarios and performed 14'000 simulations for each scenario. The dataset contains extracted output data from modeled SNOWPACK simulations, including setup files to reproduce the simulations. For further information read the README file.

global-sensitivity-analysis

display_name: global-sensitivity-analysis

numerical-avalanche-forecasting

display_name: numerical-avalanche-forecasting

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Sensitivity of modeled snow instability


en: groundwater stable-water-isotopes streamflow runoff alptal

en: Deuterium streamwater event C

media_type: text/csv

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date and time of sample collection (UTC; year-month-day, hours:minutes)
Q d.D: Deuterium composition (per mil) of streamwater sampled at the catchment outlet (697234,210472); the first sample is used as pre-event streamflow sample

en: Deuterium groundwater and baseflow August 2017

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

Date: Date (year-month-day)
Location: Well number or outlet
X: X coordinate (CH1903 LV03)
Y: Y coordinate (CH1903 LV03)
riparian: riparian wells (i.e. from the riparian-like cluster as presented in Kiewiet et al. (2019)) are marked a one, all other wells are marked a zero
d.D (per mil): Deuterium composition (per mil)

en: Deuterium streamwater event A

en: Deuterium streamwater extra event

en: Precipitation and discharge event A

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
With any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date (year-month-day) and time (hours:minutes:seconds) in UTC
Q: Discharge in mm per hour at catchment outlet (697234,210472)
P: Rainfall in mm per hour averaged for two rain gauges (697494,210675) and (698004, 210680)

en: Deuterium streamwater event B

en: Precipitation and discharge event C

en: Deuterium rainfall event A

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date (year-month-day) and time (hours:minutes:seconds) in UTC
P d.D: Deuterium composition of the rainfall samples (per mil)
X: X coordinate (CH1903 LV03)
Y: Y coordinate (CH1903 LV03)

en: Precipitation and discharge extra event

en: Deuterium rainfall event C

en: Precipitation and discharge event B

en: Deuterium rainfall extra event

en: Deuterium rainfall event B

en: Deuterium groundwater and baseflow October 2017

en: Deuterium groundwater and baseflow October 2016

en:
This dataset includes discharge and rainfall measurements and deuterium compositions of streamflow, rainfall and groundwater, for four rainfall events and three baseflow snapshot campaigns in the Studibach (Alptal, Switzerland). More specifically, we present the following data:

- Specific discharge at the catchment outlet at 5-minute resolution (mm per hour);
- Rainfall at 5-minute resolution (mm per hour);
- Rainfall deuterium composition (‰);
- Stormflow deuterium composition (‰);
- Groundwater and baseflow deuterium compositions (‰).

For the files containing rainfall and discharge timeseries (QP), and rainfall and streamwater deuterium compositions ("Deuterium_Rainfall" and "Deuterium_Streamwater"), we added the corresponding event identifier (A, B, C or extra) to the file names. For the files containing the groundwater and baseflow deuterium values ("Deuterium_Snapshot") we added the sample collection date to the file name. We included the X and Y coordinates for each data point (coordinate system: CH1903 LV3) as well as the date and time (UTC).

More information on the data collection and preparation can be found in Kiewiet et al. (in review). A detailed description of the baseflow snapshot campaigns can also be found in Kiewiet et al., 2019.

alptal

display_name: alptal

en: Discharge, rainfall, and deuterium compositions of streamwater, rainwater and groundwater, for four rainfall events in the Studibach, Alptal, Switzerland


en: mowing remote-sensing sentinel-2 land-use use-intensity grassland management landsat

en: Grassland-use intensity map 2021

media_type: geotiff

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2021. See readme file for more details.

format: GeoTIFF

en: Grassland-use intensity map 2018

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2018. See readme file for more details.

en: Preview time of 1st grassland management event 2020

en: Spatial distribution of the timing (day of year; DOY) of the first management event for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the timing of the first event of the year (Weber et al., 2023; IN REVIEW)

en: Preview number of grassland management events 2020

en: Spatial distribution of the number of management events for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the distribution of management frequency (Weber et al., 2023; IN REVIEW)

en: Readme

media_type: TXT

en: Metadata and description of the individual raster layers

en: Grassland-use intensity map 2019

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2019. See readme file for more details.

en: Grassland-use intensity map 2020

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2020. See readme file for more details.

en:
A rule-based algorithm [(Schwieder et al., 2022)](https://doi.org/10.1016/j.rse.2021.112795) was used to produce annual maps for 2018–2021 of grassland-management events, i.e. mowing and/or grazing, for Switzerland using Sentinel-2 and Landsat 8 satellite time series. All satellite images were processed with the [FORCE](https://force-eo.readthedocs.io) framework.

The resulting maps provide information on the number and timing of grassland-management events at a spatial resolution of 10 m × 10 m for the whole of Switzerland. For the final maps, permanent grasslands were masked using a variety of land-use layers, according to [Huber et al. (2022)](https://doi.org/10.1002/rse2.298) but replacing the crop mask with the agricultural-use data from the cantons.

We assessed the detection of management events based on independent reference data, which we acquired from daily time series of publicly available webcams that are widely distributed across Switzerland. We further tested the ecological relevance of the generated intensity measures in relation to nationwide biodiversity data (see Weber et al., 2023; IN REVIEW).

grassland

display_name: grassland

land-use

display_name: land-use

landsat

display_name: landsat

management

display_name: management

mowing

display_name: mowing

remote-sensing

display_name: remote-sensing

use-intensity

display_name: use-intensity

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Grassland-use intensity maps for Switzerland


en: avalanche-forecasting avalanche-danger-level avalanche-bulletin avalanche-forecast verification

en: D_QC for forecasting seasons 2001/2002 until 2019/2020.

en: D_QC for forecasting seasons 2020/2021 - 2022/2023.

en:
The data set contains the re-analyzed (or quality-checked) regional avalanche danger levels (D_QC) for Switzerland.

D_QC relates to dry-snow avalanche conditions only. Measuring the avalanche danger level D is not possible; forecast, nowcast, and hindcast assessments of D are judgments by humans interpreting data. However, combining several pieces of information indicating the same D, it can be expected that it is more likely that D_QC represents the avalanche conditions well.

For the **forecasting seasons 2001/2002 until 2019/2020**, the approach to obtain D_QC is described in detail in Appendix A of [Pérez-Guillén et. al. (2022)](https://nhess.copernicus.org/articles/22/2031/2022/nhess-22-2031-2022.html).

For the **forecasting seasons 2020/2021 and later**, D_QC is derived using the following approach:
1. *Combination of forecast (D_forecast) and nowcast (D_nowcast)*: If there was only one assessment available by an observer after a day in the field for a region, and if D_forecast = D_nowcast --> D_QC = D_forecast.
2. *Combination of several nowcast assessments (D_nowcast)*: If two (or more) observers agreed (or majority opinion) in their (independent) assessments of D_nowcast after a day in the field in the same warning region. --> D_QC = D_nowcast.
3. *Hindcast analysis (D_hindcast)*: In Switzerland, avalanche forecasters re-evaluate all situations when D = 4 (high) or D = 5 (very high) were either forecast, should have been forecast, or when forecasters discussed given one of these two levels but had not given them. Generally, two forecasters assess each situation. In these cases, D_QC = D_hindcast. The hindcast analysis, only available since the forecasting season 2020/2021, replaces what was step (2) in Appendix A of [Pérez-Guillén et. al. (2022)](https://nhess.copernicus.org/articles/22/2031/2022/nhess-22-2031-2022.html).

All other cases - ties in case of (1) or (2), no new information from the warning region in question, or if no D_hindcast was available - are not considered quality-checked, and are, thus, not contained in the data set.

In addition to D_QC, the file contains information on the elevation and aspect, where D_QC likely prevails.
- The indicated elevation is the mean of the respective elevations in (1), (2), or (3). At danger level 1 (low), when no elevation is indicated in the Swiss forecast, a value of 1500 m is set.
- For the four cardinal aspects N, E, S, and W, a value of 1 means that there was agreement that D was reached in this aspect and a value of 0 means that there was agreement that D was not reached in this aspect. Intermediate values correspondingly mark disagreements in the assessments.

avalanche-bulletin

display_name: avalanche-bulletin

avalanche-danger-level

display_name: avalanche-danger-level

avalanche-forecast

display_name: avalanche-forecast

avalanche-forecasting

display_name: avalanche-forecasting

verification

display_name: verification

en: Re-analyzed regional avalanche danger levels in Switzerland


weather-station-davos-wolfgang

maintainer: Jörg Wieder

title_for_slug: weather-station-davos-wolfgang

en: relative-humidity raclets pressure temperature weather

en: Weather Station Davos Wolfgang

en: The data file contains date and time (YYYY-MM-DD hh:mm:ss) in UTC, temperature (°C), relative humidity (%), pressure (hPa) at 10 m above ground and above sea level. The data was averaged over 10 minutes.

en: The dataset contains weather parameters measured at Davos Wolfgang (LON: 9.853594, LAT: 46.835577).

pressure

display_name: pressure

raclets

display_name: raclets

relative-humidity

display_name: relative-humidity

temperature

display_name: temperature

weather

display_name: weather