maintainer: Mountain Hydrology and Mass Movements

en: debris-flow-fatalities natural-hazard-fatalities lightning-fatalities windstorm-fatalities rockfall-fatalities flood-fatalities earthquake-fatalities landslide-fatalities ice-avalanche-fatalities

en: Natural hazard fatalities per year in Swizterland since 1946.

en:
This dataset contains the number of fatalities due to flood, debris flow, landslide, rockfall, windstorm, lightning, ice avalanche, earthquake and other processes like roof avalanche or lacustrine tsunami for each year since 1946.
The following information is contained (by column and column title):

* year
* total number of hazard fatalities
* number of fatalities by flood (German: Hochwasser, Überschwemmung). Flood includes people drowned in flooded or inundated areas or carried away in streams under high-water conditions.
* number of fatalities by debris flow (German: Murgang).
* number of fatalities by landslide (German: Erdrutsch). Landslide includes people killed by landslides and hillslope debris flows (German: Hangmure).
* number of fatalities by rockfall (German: Steinschlag, Fels- und Bergsturz).
* number of fatalities by windstorm (German: Sturm). Windstorm includes people killed by falling objects or trees during very strong wind conditions and people who drowned in lakes because their boat capsized during such conditions.
* number of fatalities by lightning (German: Blitz).
* number of fatalities by ice avalanche (German: Eislawine).
* number of fatalities by earthquake (German: Erdbeben).
* number of fatalities by other processes like roof avalanche, lacustrine tsunami (German: andere Prozesse wie Dachlawine, Tsunami im See).

The data was collected based on newspaper research. For more information please refer to

_Badoux, A., Andres, N., Techel, F., and Hegg, C.: Natural hazard fatalities in Switzerland from 1946 to 2015, Nat. Hazards Earth Syst. Sci., 16, 2747-2768, https://doi.org/10.5194/nhess-16-2747-2016, 2016._

The data collection is financed by the FOEN (with exception of the collection of the avalanche fatalities). The data contains the official statistics of the FOEN on fatalities due to flood, debris flow, landslide, rock fall and avalanche.

Restrictions: The data set is not complete. Only fatalities in or around settlements and on open transportation routes are included. More precisely, fatalities were not collected, when persons exposed themselves to a great danger on purpose. Or fatalities during leisure activities which are connected to a higher risk were not included (this includes e.g. canoeing or river surfing during flood, canyoning, mountaineering, climbing, walking or driving on a closed road).

Fatalities by avalanches are collected at the WSL Institute for Snow and Avalanche Research SLF. You can download the avalanche fatalities per hydrological year [here](https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936) and per calendar year [here](https://www.envidat.ch/dataset/avalanche-fatalities-per-calendar-year-since-1936). For a direct comparison with the fatalities presented here, please download the data set with the calendar years and do not consider fatalities in the backcountry (tour) or in terrain close to ski areas (offpiste).

debris-flow-fatalities

display_name: debris-flow-fatalities

earthquake-fatalities

display_name: earthquake-fatalities

flood-fatalities

display_name: flood-fatalities

ice-avalanche-fatalities

display_name: ice-avalanche-fatalities

landslide-fatalities

display_name: landslide-fatalities

lightning-fatalities

display_name: lightning-fatalities

natural-hazard-fatalities

display_name: natural-hazard-fatalities

rockfall-fatalities

display_name: rockfall-fatalities

windstorm-fatalities

display_name: windstorm-fatalities

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: Number of natural hazard fatalities per year in Switzerland since 1946


maintainer: Christoph Marty

state: active

type: dataset

en: Aare input

media_type: application/x-tar

en: Grid input data for the 'Aare' CH2014 simulation.

format: SERVICE

mimetype: application/x-tar

en: Graubunden input

en: Grid input data for the 'Graubunden' CH2014 simulation.

en: CH2014 REPORT

en:
CH2014-Impacts: Toward Quantitative Scenarios of Climate Change Impacts in Switzerland

The CH2014-Impacts report presents the results of a concerted effort of 15 Swiss research institutions to describe impacts of climate change in Switzerland quantitatively. This dataset contributes to the Crosphere/Snowcover section.

en: Dataset

en: Datasets are grouped under experiment "Aare" and "Graubunden".Data is also made available in netCDF format. A range of tools are available to [read netCDF](http://www.unidata.ucar.edu/software/netcdf/software.html).

en:
 Overview

The CH2014-Impacts initiative is a concerted national effort to describe impacts of climate change in Switzerland quantitatively, drawing on the scientific resources available in Switzerland today. The initiative links the recently developed Swiss Climate Change Scenarios CH2011 with an evolving base of quantitative impact models. The use of a common climate data set across disciplines and research groups sets a high standard of consistency and comparability of results. Impact studies explore the wide range of climatic changes in temperature and precipitation projected in CH2011 for the 21st century, which vary with the assumed global level of greenhouse gases, the time horizon, the underlying climate model, and the geographical region within Switzerland. The differences among climate projections are considered using three greenhouse gas scenarios, three future time periods in the 21st century, and three climate uncertainty levels (Figure 1). Impacts are shown with respect to the reference period 1980-2009 of CH2011, and add to any impacts that have already emerged as a result of earlier climate change.

 Experimental Setup

Future snow cover changes are simulated with the physics-based model Alpine3D (Lehning et al., 2006). It is applied to two regions: The canton of Graubünden and the Aare catchment. These domains are modeled with a Digital Elevation Model (DEM) with a resolution of 200 m × 200 m. This defines the simulation grid that has to be filled with land cover data and downscaled meteorological input data for each cell for the time period of interest at hourly resolution. The reference data set consists of automatic weather station data. All meteorological input parameters are spatially interpolated to the simulation grid. The reference period comprises only thirteen years (1999–2012), because the number of available high elevation weather stations for earlier times is not sufficient to achieve unbiased distribution of the observations with elevation. The model uses projected temperature and precipitation changes for all greenhouse gas scenarios (A1B, A2, and RCP3PD) and CH2011 time periods (2035, 2060, and 2085).

 Data

Snow cover changes are projected to be relatively small in the near term (2035) (Figure 5.1 top), in particular at higher elevations above 2000 m asl. As shown by Bavay et al. (2013) the spread in projected snow cover for this period is greater between different climate model chains (Chapter 3) than between the reference period and the model chain exhibiting the most moderate change. In the 2085 period much larger changes with the potential to fundamentally transform the snow dominated alpine area become apparent (Figure 5.1 bottom). These changes include a shortening of the snow season by 5–9 weeks for the A1B scenario. This is roughly equivalent to an elevation shift of 400–800 m. The slight increase of winter precipitation and therefore snow fall projected in the CH2011 scenarios (with high associated uncertainty) can no longer compensate for the effect of increasing winter temperatures even at high elevations. In terms of Snow Water Equivalents (SWE), the projected reduction is up to two thirds toward the end of the century (2085). A continuous snow cover will be restricted to a shorter time period and/or to regions at increasingly high elevation. In Bern, for example, the number of days per year with at least 5 cm snow depth will decrease by 90% from now 20 days to only 2 days on average.

climate-change

display_name: climate-change

snow-depth

display_name: snow-depth

snow-water-equivalent

display_name: snow-water-equivalent

fr: Education, science

de: Bildung, Wissenschaft

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Alpine3D simulations of future climate scenarios CH2014


photogrammetric-drone-data-dorfberg

title_for_slug: photogrammetric-drone-data-dorfberg

en: snow drone-data photogrammetry uav dsm orthophoto snow-depth-mapping snow-distribution

en: Data Access

media_type: TIF

en:
- 3cm-resolution Orthophoto
- 10cm-resolution DSM
- 10cm-resolution snow depth raster
- original RGB images
- Agisoft Metashape Report

All products are also available as a cloud optimized geotiff.

en: The data was collected with a Wingtra Gen II drone and a Sony RX1R II sensor. In total, 10 flights were conducted at different dates, both in summer and winter. A DSM, an orthophoto, a snow depth raster and the original drone images from every flight are available at a high resolution (10cm and 3cm, respectively).

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

snow

display_name: snow

snow-depth-mapping

display_name: snow-depth-mapping

snow-distribution

display_name: snow-distribution

uav

display_name: uav

en: Photogrammetric Drone Data Dorfberg


en: rutschblock snow-instability snowpack-simulation failure-layer snow-profiles snowpack snow-stratigraphy

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

media_type: .csv

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en: Simulated snow profiles

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en: DAV data set: Properties of observed snow profiles and simulated failure layers

media_type: CSV

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

format: CSV

en: ReadMe

en: ReadMe file explaining data structure and content

en: Observed snow profiles

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-instability

display_name: snow-instability

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack

display_name: snowpack

snowpack-simulation

display_name: snowpack-simulation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Observed and simulated snow profile data


maintainer: Ueli Reber

en: biodiversity bgb text-corpus policy-analysis policy-documents environmental--policy switzerland

en: Replication files

en:
 Introduction

The ZIP file contains all data and code to replicate the analyses reported in the following paper.

Reber, U., Fischer, M., Ingold, K., Kienast, F., Hersperger, A. M., Grütter, R., & Benz, R. (2022). Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics. *Policy Sciences*. [https://doi.org/10.1007/s11077-022-09456-4](https://doi.org/10.1007/s11077-022-09456-4)

If you use any of the material included in this repository, please refer to the paper. If you use (parts of) the text corpus, please also refer to the sources used for its compilation listed below. The content of the texts may not be changed.

 Data folder

The data folder contains the following files.

* _corpus.parquet_: Text corpus of Swiss policy documents
* _dict_de.csv_: Biodiversity dictionary (German)
* _dict_fr.csv_: Biodiversity dictionary (French)
* _dict_it.csv_: Biodiversity dictionary (Italian)
* _topic_labels.csv_: labels/codes for policy sectors
* _topics.csv_: labels/codes for policy sectors

The corpus and the dictionary were compiled by the authors specifically for this project. The labels/codes for policy sectors are based on the [coding scheme](http://ws-old.parlament.ch/affairs/topics) of the Swiss Parliament.

 Text corpus

The text corpus consists of 439,984 Swiss policy documents in German, French, and Italian from 1999 to 2018. The corpus was compiled from the following source between 2020-10-01 and 2021-01-31.

* Transcripts and parliamentary businesses (e.g. questions, motions, parliamentary initiatives) via the [Web Services (WS)](https://www.parlament.ch/de/%C3%BCber-das-parlament/fakten-und-zahlen/open-data-web-services) provided by the Swiss Parliament
* The official compilation of federal legislation ("Amtliche Sammlung", AS) via [opendata.swiss](https://opendata.swiss/de/dataset/official-compilation-of-federal-legislation-bs-as-1947-2018) provided by the Swiss Federal Archives (SFA)
* The federal gazette ("Bundesblatt") via [fedlex.admin.ch](https://www.fedlex.admin.ch/de/fga/index)
* Decisions of federal courts via [entscheidsuche.ch (ES)](https://entscheidsuche.ch/)

The corpus is stored in a single data frame to use with R saved as [PARQUET](https://parquet.apache.org/) file (corpus.parquet). The data frame has the following structure.

* _text_id_: Unique identifier for each text (source information as prefix, e.g. "t_")
* _doc_type_: Document type (see coding scheme below)
* _branch_: Government branche (1 legislative, 2 executive, 3 judicative)
* _stage_: Stage of policy process (1 drafting, 2 introduction, 3 interpretation)
* _year_: Year of publication
* _topic_: Policy sector (coding scheme in separate file in data folder)
* _lang_: Language (de, fr, it)
* _text_: Text

The following list contains the coding scheme for the doc_type variable.

* 101: Federal gazette // Draft for public consultation ("Vernehmlassungsverfahren")
* 102: Federal gazette // Explanation of draft for parliament ("Botschaft")
* 103: Federal gazette // Strategy, action plan
* 104: Federal gazette // Federal council decree ("Bundesratsbeschluss")
* 105: Federal gazette // (Simple) Federal decree ("(Einfacher) Bundesbeschluss")
* 106: Federal gazette // General decree ("Allgemeinverfügung")
* 107: Federal gazette // Treaty ("Übereinkommen")
* 108: Federal gazette // Treaty ("Abkommen")
* 109: Federal gazette // Draft for parliament ("Entwurf")
* 110: Federal gazette // Report ("Bericht")
* 111: Federal gazette // Report of parliamentary comission ("Bericht")
* 112: Federal gazette // Report of federal council ("Bericht")
* 201: Parl. businesses // Submitted text
* 202: Parl. businesses // Reason text
* 203: Parl. businesses // Federal council response
* 204: Parl. businesses // Initial situation
* 205: Parl. businesses // Proceedings
* 301: Parl. transcripts // Speech of MP
* 302: Parl. transcripts // Speech of federal council
* 401: Federal legislation // Legal text of the official compilation (law, ordinances, etc.)
* 501: Court decisions // Federal Supreme Court
* 502: Court decisions // Federal Criminal Court
* 503: Court decisions // Federal Administrative Court

 Code folder

The code folder contains all R code for the analyses. The files are numbered chronologically.

* _1_classifier_training.R_: Training of classifiers for classification of policy sectors
* _2_classifier_application.R_: Classification of documents in corpus
* _3_dictionary_application.R_: Biodiversity indexing of documents in corpus
* _4_stm_truncation.R_: Truncation of indexed documents to keep only relevant parts
* _5_stm_translation.R_: Translation of FR and IT documents to DE
* _6_stm_model.R_: Preprocesssing and structural topic model
* _7_plots.R_: Plots and numbers as included in the paper

The code/functions folder contains custom functions used in the scripts, e.g. to support topic model interpretation.

Package versions and setup details are noted in the code files.

 Contact

Please direct any questions to Ueli Reber (ueli.reber@eawag.ch).

bgb

display_name: bgb

biodiversity

display_name: biodiversity

environmental--policy

display_name: environmental--policy

policy-analysis

display_name: policy-analysis

policy-documents

display_name: policy-documents

switzerland

display_name: switzerland

text-corpus

display_name: text-corpus

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Replication files for "Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics"


maintainer: Daniela Brito Melo

en: snow-cohesion large-eddy-simulations saltation drifting-snow mixed-grain-transport

en: Data in Figures

media_type: zip-compressed folder of csv

en: Simulation results presented in Figures 1 to 11 of the research article "Modeling snow saltattion: the effect of grain size and interparticle cohesion" in csv format.

en: LES-LSM code

en: Source code used to perform the analysis presented at the research article "Modeling snow saltation: the effect of grain size and interparticle cohesion". The source code is also available at the WSL/SLF GitLab Repository (https://gitlabext.wsl.ch/atmospheric-models/les-lsm).

en:
This dataset includes the parallel application and the main results supporting the research article "Modeling snow saltation: the effect of grain size and interparticle cohesion" published at the Journal of Geophysical Research: Atmospheres.
The code is a flow solver based on the Large Eddy Simulation (LES) technique coupled with a Lagrangian Stochastic Model (LSM). The interaction of snow particles with the bed is modeled with statistical and physically-based models for aerodynamic entrainment, rebound and splash, following the works of Groot Zwaaftink et al. (2014), Comola and Lehning (2017) and Sharma et al. (2018). This algorithm was also used by Sigmund et al. (2021) to model snow sublimation.

drifting-snow

display_name: drifting-snow

large-eddy-simulations

display_name: large-eddy-simulations

mixed-grain-transport

display_name: mixed-grain-transport

saltation

display_name: saltation

snow-cohesion

display_name: snow-cohesion


maintainer: EnviDat Support

en: cmip5 orographic-precipitation air-temperature climate-change precipitation-amount

en: Download Server

en:
Predicting future climatic conditions at high spatial resolution is essential for many applications in science. Here we present data for monthly time series of precipitation and minimum and maximum temperature for four downscaled global circulation models. We used model output statistics in combination with mechanistic downscaling (the CHELSA algorithm) to calculate mean monthly maximum and minimum temperatures, as well as monthly precipitation sums at ~5km spatial resolution globally for the years 1850-2100. We validated the performance of the downscaling algorithm by comparing model output with observed climates for the years 1950-2069.

CHELSA_cmip5_ts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

climate-change

display_name: climate-change

orographic-precipitation

display_name: orographic-precipitation

precipitation-amount

display_name: precipitation-amount

en: High resolution monthly precipitation and temperature timeseries for the period 2006-2100


ceilometer-klosters

title_for_slug: ceilometer-klosters

en: cloud-base-height vertical-visibility ceilometer raclets klosters

en: Ceilometer data Klosters

media_type: mat

en: Ceilometer installed at Klosters measuring cloud base height, cloud cover and backscatter profile. The time resolution is 30 seconds, with time given in number of days from January 0, 0000, UTC. More information on the variables in the manufacturer manual.

en: Cloud base height (m) and vertical visibility (m) were measured with the VAISALA Ceilometer CL31 in Klosters (LON: 9.880413, LAT: 46.869019). The CL31 is an instrument with constant reliability for all weather conditions and simultaneous detection of three cloud layers in heights up to 7.6 km.

ceilometer

display_name: ceilometer

cloud-base-height

display_name: cloud-base-height

klosters

display_name: klosters

raclets

display_name: raclets

vertical-visibility

display_name: vertical-visibility

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Ceilometer Klosters


en: natural-avalanches machine-learning avalanche avalanche-size snowpack-model

en: Data set AV2 used for training the avalanche-size estimator (Sections 2.1.2 and 3.2 in Mayer et al.)

format: XLS

en: Data set DL was used for validation of the avalanche-day classifier and the avalanche-size estimator. The data set contains the quality-checked danger levels merged with the respective SNOWPACK simulations (Sections 2.3 and 3.3(2) in Mayer et al.).

en: Data set AV3 was used for validation of the avalanche-day classifier (Sections 2.1.3 and 3.3(1) in Mayer et al.).

en: Data set AV1 was used for training the avalanche-day classifier (Sections 2.1.1, 2.2, and 3.1 in Mayer et al.).

en:
The data set contained in this repository was used in the analysis by Mayer et al. (2023):
Mayer, S. I., Techel, F., Schweizer, J., and van Herwijnen, A.: Prediction of natural dry-snow avalanche activity using physics-based snowpack simulations, EGUsphere, https://doi.org/10.5194/egusphere-2023-646, 2023.

avalanche

display_name: avalanche

avalanche-size

display_name: avalanche-size

machine-learning

display_name: machine-learning

natural-avalanches

display_name: natural-avalanches

snowpack-model

display_name: snowpack-model

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data-set for prediction of natural dry-snow avalanche activity and avalanche size using physics-based snowpack simulations


en: ecosystem-protection gis decision-making hydropower integral-water-management

media_type: SHP

format: SHP

en: Indicators

media_type: text/markdown

en: The indicators capture supporting ecosystem functions.

en:
 A spatial dataset and tool to simultaneously assess hydropower potential and ecological potential of the Swiss river network (Version 2016)

 Introduction
The steadily growing demand for energy and the simultaneous pursuit of decarbonisation are increasing interest in the expansion of renewable energies worldwide. In Switzerland, various funding projects have been launched to promote technologies in the field of renewable energies and their application as quickly as possible. With the introduction of a funding instrument in 2009, the number of projects submitted to produce renewable energies increased rapidly. The applications for small hydropower plants (≤ 10 MW) were correspondingly numerous. However, the assessment of the environmental impact and its comparison with hydropower importance is still not standardized.
To provide a basis for decision-making, a methodology was developed to determine the overall hydropower potential of a region. A detailed assessment of each river reach, and the systematic and holistic assessment of small hydropower projects at a regional scale are combined here. The assessment of a river reach is conducted at the river space (i.e., the river and adjacent areas) and at the surrounding landscape level. The HYDROpot_integral methodology was developed as part of Carol Hemund's dissertation (2012) at the University of Bern. It allows the evaluation of river reaches holistically, regarding ecological, social, economic and cultural criteria. As a second part of the overall project, the theoretical hydropower (or hydraulic) potential was calculated for the entire river network, which complemnets the spatial assessment. In particular, it is possible to classify river reaches into those that are more suitable for hydropower production (=”use”) and those that are more suitable for protection.

 Material and method
The HYDROpot_Integral method was developed and tested on the basis of cantonal and national data (Hirschi et al. 2013). The method relies on 73 geodata sets. This holistic assessment is the key element of the entire assessment procedure. Its aim is to quantify the importance of the ecosystem functions in terms of services. The river network (GWN07) is divided into reaches of about 450m and for each reach two study units are defined. The river space (RS) records the ecosystem functions of the water body and the nearby riparian area. The length of the RS is 315 m on average in Switzerland and a maximum of 450 m, whereas the width is based on the FOEN definition (BWG 2001: 18f) and varies between 7-107 m. The surrounding landscape (SLS) is the second survey unit that records the ecosystem functions of the surrounding area over a range of 21 m to 321 m. The SLS is calculated over three times the RS width. The length of the SLS is identical to the length of the RS. The ecosystem functions are divided into three types: regulating (service A), cultural (service B) and provisioning (service C) functions. Accordingly, the assessment of the functions is divided into three parts and three values are assigned to each river reach. The more functions there are and the greater their performance, the higher these values are and the more important the corresponding functions are. Hence, these values quantify the importance of the ecosystem functions and the ecological, cultural and economic ecosystem services of each river reach. The concatenation of ecosystem services results in a value (ABC) that can occur in 125 different versions due to the chosen five-level value scale; i.e. each digit of the three-digit number sequence can be assigned a value between 1 and 5. Each of the 125 combinations, and thus each river reach, has its own characteristics determined by the assessments of the three function types. To record the suitability, the combinations are ranked according to their ecological, cultural and economic ecosystem services. These rules mean that the combination that is most suitable for hydropower production at minimum cost in terms of ecological and cultural ecosystem services and has a high economic potential is ranked first; rank 125 indicates the highest ecological and cultural ecosystem services and the lowest economic services and is therefore most suitable for protection. A river reach that is excluded from hydropower use due to legislation, a so-called priority reach, is given rank 126 from the outset and specially marked. A more detailed description of the methods can be found in Hirschi et al. 2013 [Link]. The dataset presented here presents the latest state of the HYDROpot_integral methodology applied at the national level. Only national data that is easily accessible was used in the preparation of the dataset. The cantonal data, such as renaturation and revitalization, would have to be requested by each canton individually and was excluded here. The nationwide value synthesis was made with R.
A list of data sources can be found here [link to text file]
A list of all parameters can be downloaded here [link to PDF and text files]

 Dataset description
Data is presented as a single shapefile. It contains the river network and all assessment results obtained with HYDROpot_Integral.

 Changes in the methodology compared to the original method (Hirschi et. al 2013)

 * RS_A11 Ecomorphology: recorded for the whole of Switzerland and zero values equated with NA;
individual cantons such as Zug and St. Gallen have no mapped values according to the modular
concept of the federal government, Valais and Graubünden only the main valleys, Ticino and Fribourg not
completely (BAFU 2009).
 * RS_A14 Renaturation and revitalization data: not centrally available at the time of data collection.
centrally available, therefore values in GR were equated with NA.
 * RS_A15 Dilution ratio at wastewater treatment plants (WWTPs) for discharges: Zero values
equal to NA.
 * RS_A20 Water flow: use WASTA (2013) with hydroelectric power plants (> 300 kW) under
Federal control and dams serving hydroelectricity (Dam, as of 2013).
 * RS_C05 Synoptic hazard maps: are cantonally managed at the time of data collection,
Values in GR are marked with a 5 so that the systematics in the decision tree is not affected.
is affected.
 * Water quality (RS_A15, RS_A16, RS_A17, RS_A18, RS_A19): for the evaluation of the function type.
A Nature, it is important whether the median of the five values is less than or equal to 3 in total. This
evaluation is based on the decision tree for evaluating GR (Hirschi et al. 2013:22).
Therefore, an evaluation of the station data is made where critical and possible river segments
with poor quality (median less than 3) exist. Only two longer and one short
sections in Switzerland receive a lower median than 3 for water quality.
 * SLS_B06 Visibility: For 99 percent of the river segments (30,733 of 31,062) in the canton of
Bern (2015 reduced version), the landscape area is considered to be visible. Due to this high number
of sections, a large number of viewpoints in the layer of Swisstopo and
the computation time and computability in ArcGIS, the landscape area is classified as generally viewable
(equal to 1).
16 Method
Additional indicators were added (see Appendix B.2):
 * SLS_A21 Dissection
 * SLS_A22 Forest areas
 * SLS_B03 Hiking trails
 * SLS_B10 Residential and vacation homes
 * SLS_B11 Tourist infrastructure
 * SLS_C01 Landfill
 * SLS_C03 Infrastructure
 * SLS_C05 Industry
 * SLS_C06 Agricultural land
Not to be added, although present to some extent:
 * SLS_B06 Cultural assets of national importance: here, too, the calculability of the visibility analysis is
for the whole of Switzerland is limited
 * SLS_A15 Legally binding protection and land use planning: the individual river sections are not
clearly designated, i.e. no geodata exist
The following data are also not supplemented, as they are cantonal data:
 * SLS_A10 Cantonal nature reserves
 * SLS_A16 Forest reserves
 * SLS_A17 Cantonal inventories and contractually protected areas

decision-making

display_name: decision-making

ecosystem-protection

display_name: ecosystem-protection

gis

display_name: gis

hydropower

display_name: hydropower

integral-water-management

display_name: integral-water-management


maintainer: Michael Lehning

en: Data Source

media_type: R

en: Hourly Gridded Wind Power Time Series

en: Coordinates of Grid Points

en: Description

media_type: application/pdf

en: Full Data Description

format: PDF

mimetype: application/pdf

en:
This dataset consist of simulated hourly power production from an Enercon E82 Turbine at 100 m hub-height. It describes the hourly power output a 1MW turbine would produce in each 0.01° grid cell for the years 2016 and 2017.

100 m wind speed data was taken from the COSMO-1 model (Consortium for Small-scale Modeling 2017), which has a 0.01° horizontal resolution. The domain covered is the whole of Switzerland, with the exclusion of lakes. As such, the number of 0.01◦ pixels within Switzerland amounts to 48657.
Conversion to power output was done based on the power curve of the Enercon E82 Turbine. As power output is lower at altitude due to lower air density, we corrected for this effect as described in (Kruyt et al. 2017).

Please cite the following paper in connection with the dataset:

Paper Citation:
 > _Bert Kruyt, Jérôme Dujardin, and Michael Lehning: Improvement of wind power assessment in complex terrain: The case of COSMO-1 in the Swiss Alps, Front. Energy Res., [doi:10.3389/fenrg.2018.00102] (https://doi.org/10.3389/fenrg.2018.00102)_

mountain-wind-potential

display_name: mountain-wind-potential

topography

display_name: topography

wind-energy

display_name: wind-energy

en: Dataset on Cosmo-1 based Energy Potential in Swiss Alps


en: ecological-indicator-values taxonomic-diversity functional-diversity phylogenetic-diversity grain-size climate soil

en: Data access

media_type: ZIP

format: ZIP

en:
This dataset comprises a large array of ecological data for the European Alps:

  (1) Current soil and climate predictors at various resolutions.
  (2) GBIF observations of the European Alps Flora (~4,000 species).
  (3) Species habitat suitability maps (1,109 species; based on species observations filtered at 40x40-km)
  at various resolutions used in the study to generate (4); except 'expert'...
  (4) Expert, Taxonomic, phylogenetic and functional diversity of the study region at various resolutions
  (from 100-m to 40-km --> 100-m aggregated & mean to km + non-aggregated/predicted) for CLIM,
  SOIL and CLIM-SOIL models.
  (5) Ecological and altitudinal preferences of the European Alps Flora.
  (6) Data outputs of the related published article.
  (7) All scripts used for analyses.
  (8) Additional files used for analyses.
  (9) Improved set of species habitat suitability maps (~2,600 species; based on species observations
  filtered at 1x1-km) and related taxonomic diversity at 100-m resolution (aggregated to km +
  non-aggregated/predicted) for CLIM, SOIL and CLIM-SOIL models ---> not incorporated in the study.

climate

display_name: climate

ecological-indicator-values

display_name: ecological-indicator-values

functional-diversity

display_name: functional-diversity

grain-size

display_name: grain-size

phylogenetic-diversity

display_name: phylogenetic-diversity

soil

display_name: soil

taxonomic-diversity

display_name: taxonomic-diversity

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Resolution in species distribution models shapes spatial patterns of plant multifaceted diversity


maintainer: Anita C. Risch

en: non-native-plant herbivory weed-management native-plant grassland

en: Correction: Data file native and non-native plant interactions in Australian grasslands

media_type: XLSX

en:
taxa tab:	list and overview of all the recorded species

* family:                 family of the plant

* genus:                genus of the plant

* species:                plant species name

* origin:                indicates whether the plant is native to Australia or not (non-native)

* common name:	        common name of the plant species

* functional group:	        functional group of the plant species: forb, graminoid, fern, tree

* functional group detailed:	gives more detail about the type of graminoid and forb: legume, forb (non-leguminous),
                        grass, sedge, rush, fern, tree

* lifeform:                annual or perennial lifeform (species which can have both of these lifeforms where
                        considered as annuals)

plot tab:	list of species found in each plot and their cover (%)

* sampling.session:        provides information about the sampling time:
                        May2020 = data that was collected in May 2020
                        Nov2020 = data that was collected in November 2020

* farm.name:	            name of the farms where the sampling took place:
                        SF = farm of the Southern group
                        NF = farm of the Northern group
                        numbers 1-3 = randomly allocated to the Southern group of farms
                        numbers 4-6 = randomly allocated to the Northern group of farms

* site.type:	                KG: Kangaroo grass dominated site
                        ALG: ALG+KG site (Kangarooo grass and African lovegrass co-dominated site)

* plot.no:                plot number: 9-12

* scientific.name:	        scientific name of the plant species found in a certain plot

* functional group:	        indicates whether the species found is a tree, forb, graminoid or fern

* functional group detailed:	indicates whether the species found is a tree, legume, forb (non-leguminous),
                        grass, sedge, rush, fern

* lifeform:                specifies the lifeform of the species: annual or perennial lifeform
                        (species which can have both of these lifeforms where considered as annuals)

corrections tab:	Detailed description of corrections made in plot.data tab

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Schlierenzauer, C., Risch, A.C., Schütz, M., Firn, J. 2021. Non-native Eragrostis curvula reduces plant species diversity in pastures of South-eastern Australia even when native Themeda triandra remains co-dominant. Plants 10, 596._

Please cite this paper together with the citation for the datafile.

Study area
The study was conducted in the lowland grassy woodlands of the Bega Valley Region, which is located in the south-east corner of New South Wales, Australia. Embedded between the Pacific Ocean and the Australian Alps, the lowland grassy woodlands are mostly located on granitic substrates and reach elevations of roughly 500 m above sea level. Typically, these grassy woodlands receive less precipitation (mean annual precipitation between 700-1100 mm) compared to the more elevated areas that surround them (NSW Government - Office of Environment and Heritage 2017).
The vegetation is dominated by an open tree canopy layer consisting of Eucalyptus tereticornis Sm, Angophora floribunda Sm. (Sweet) and a range of other eucalypt species. Sometimes shrub or small trees are also present, whereas grasses and forbs form the ground-cover. In areas without intensive agricultural history, this layer is dominated by perennial, tussock grasses such as Themeda triandra Forssk, Microlaena stipoides R.Br (Weeping Grass), Eragrostis leptostachya Steud. (Paddock Lovegrass) and Echinopogon ovatus P.Beauv (Forest Hedgehog Grass). The remaining inter-tussock spaces are occupied by a diversity of growth-restricted grasses and herbaceous forbs (NSW - Department of Planing, Industries and Environment 2019; NSW Government - Office of Environment and Heritage 2017).
Clearing, pasture sowing, fertilizer application and livestock grazing resulted in a dramatic decrease in the extent of these natural woodlands, with less than five percent within conservation reserves and overall, with only about 20% of their original extent in New South Wales still existing (Tozer et al. 2010). The remaining areas outside of reserves are threatened by altered fire frequencies, habitat clearing, livestock grazing and especially by non-native plant invasion, particularly Eragrostis curvula (Schrad.) Nees. For this reason, the grassy woodlands are listed as an endangered ecological community in the NSW state legislation. Additionally, they are considered as critically endangered by the Commonwealth of Australia (Threatened Species Scientific Committee (TSSC) 2013).

Experimental design and sampling
The study was conducted on six farms and in each of them two sites were chosen, representing a paired design. One of the sites at each farm is dominated by native Themeda triandra, the other one co-dominated by non-native Eragrostis curvula and Themeda triandra. All farms are within a radius of approximately 10 km from the town Candelo. Three of the farms are located North (36°40’ to 36°42’ S and 149°38’ to 149°42’ E) and three of them are located South (36°51’ to 36°49’ S and 149°38’ to 149°42’ E) of Candelo.
Non-native herbivores (mainly cattle, sheep and rabbits) and native herbivorous marsupials (mainly kangaroos, wallabies and wombats) are present in the area of these sites. On each site, data was collected within four plots (each 1 x 1 m) in May and November 2020. All plant species found within a plot were recorded and their relative abundance was estimated.

References
NSW - Department of Planing, Industries and Environment. 2019. “Lowland Grassy Woodland in the South East Corner Bioregion - Endangered Ecological Community Listing.” https://www.environment.nsw.gov.au/topics/animals-and-plants/threatened-species/nsw-threatened-species-scientific-committee/determinations/final-determinations/2004-2007/lowland-grassy-woodland-south-east-corner-bioregion-endangered-ecological-community-l (February 18, 2021).
NSW Government - Office of Environment and Heritage. 2017. “Lowland Grassy Woodland in the South East Corner Bioregion - Profile.” https://www.environment.nsw.gov.au/threatenedSpeciesApp/profile.aspx?id=20070 (January 31, 2021).
Threatened Species Scientific Committee (TSSC). 2013. Environment Protection and Biodiversity Conservation Act 1999 (EPBC Act) Conservation Advice for Lowland Grassy Woodland in the South East Corner Bioregion. http://www.environment.gov.au/biodiversity/threatened/communities/pubs/82-conservation-advice.pdf.
Tozer, Mark et al. 2010. “Native Vegetation of Southeast NSW: A Revised Classification and Map for the Coast and Eastern Tablelands.” Cunninghamia : a journal of plant ecology for eastern Australia 11(3): 359–406.

grassland

display_name: grassland

herbivory

display_name: herbivory

native-plant

display_name: native-plant

non-native-plant

display_name: non-native-plant

weed-management

display_name: weed-management

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Native and no-native plant interactions in Australian grasslands


bryophytes-of-europe-traits-bet-dataset

title_for_slug: bryophytes-of-europe-traits-bet-dataset

en: life-history-traits red-list mosses indicator-values iucn bioclimatic-variables liverworts hornworts

media_type: PDF

en: PDF including the (trait) explanations.

en: Excel file including the BET dataset and (trait) explanations.

media_type: TXT

en: Text file including the BET dataset.

format: TXT

en: The Bryophytes of Europe Traits (BET) dataset includes values for 65 biological and ecological traits and 25 bioclimatic variables for all 1816 bryophytes included in the European Red List (Hodgetts et al. 2019). The traits are compiled from several regional trait datasets and manually complemented using Floras, species-specific literature and expert knowledge. The bioclimatic variables are calculated using the European range of each species. Details regarding the trait compilation and extraction of bioclimatic variables can be found in the corresponding data paper (Van Zuijlen et al. 2023).

bioclimatic-variables

display_name: bioclimatic-variables

hornworts

display_name: hornworts

indicator-values

display_name: indicator-values

iucn

display_name: iucn

life-history-traits

display_name: life-history-traits

liverworts

display_name: liverworts

mosses

display_name: mosses

red-list

display_name: red-list


dischmex-meteorological-measurements

maintainer: Rebecca Mott

title_for_slug: dischmex-meteorological-measurements

en: dischma meteorological-measurements meteorological-data dischmex meteo-station

en: Meteorological measurement 2015

en: Location of the meteorological stations

en: Meteorological measurement 2014

media_type: application/zip

en: data

mimetype: application/zip

en: Meteorological measurements 2014

en: Meteorological measurements 2016

en: Overview sensors

en:
Meteorological measurements recorded in the Dischma valley from 2014-2016. In 2014 and 2015 we used 11 mobile weather stations from sensorscope to record meteorological parameter in the upper Dischma valley in the closer surroundings of the Gletschboden area. The meteorological stations are eqiupped with at least air temperature/humidity, wind velocity and wind direction sensors. Some stations are additionally equipped with precipitation, shortwave radiation and snow surface temperature sensors.
Three transects were installed at different aspects and were equipped with air temperature/humidity and wind sensors. Transect 1 (stations 2-4) provides meteorological Information on an east-north-east facing slope at elevations ranging between 2100 m and 2500 m. Transect 2 (stations 5-7) provides meteorological Information on a south-west slope and transect 3 (stations 8-10) on a north-west slope. Station 1 is fully equipped with meteorological sensors (temperature/humidity, wind, IR, up and downwand shortwave radiation and precipitation).
In 2016, mobile stations from sensorscope were replaced with six permanent meteorological stations. Meteorological stations 1-3 are equipped with an air temperature/humidity sensor, two wind speed sensors, a wind direction sensor and an incoming and outgoing shortwave radiation sensor. Stations 4 and 6 are equipped with an air temperature/humidity sensor and a wind speed/direction sensor. Station 5 is a equipped with an air temperature/humidity sensor, a wind speed/direction sensor, a snow surface temperature sensor, an incoming and outgoing shortwave radiation sensor and an incoming longwave radiation sensor.

dischma

display_name: dischma

dischmex

display_name: dischmex

meteo-station

display_name: meteo-station

meteorological-data

display_name: meteorological-data

meteorological-measurements

display_name: meteorological-measurements

en: DISCHMEX - Meteorological measurements


maintainer: Nander Wever

en: wind-speed shortwave-radiation longwave-radiation air-temperature precipitation-amount wind-direction snow-depth humidity snow-ice-temperature

en: Version 1

media_type: SMET

en:
Deprecated version. Release notes:

First release of dataset.

en: SNOWPACK sno file

en: This sno-file can be used to run SNOWPACK simulations with the WFJ data set, using version 3.4.0 or higher.

en: All versions

en: Version 5

en:
Deprecated version. Release notes:

Update: using the incoming and outgoing short- and longwave radiation data from the new processing chain from 2010 onwards, filling also data gaps in pre-2010 data.

Update: dataset extended to 2016-10-04T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: Version 4

en:
Deprecated version. Release notes:

Update: dataset extended to 2016-09-02T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: Version 2

en:
Deprecated version. Release notes:

Bug fix: in v1, incoming radiation components were taken from WFJ_Gipfel station, instead of WFJ Versuchsfeld.

en: Undercatch correction

en: This document describes how the undercatch correction for the Weissfluhjoch measurement site was determined.

en: Version 3

en:
Deprecated version. Release notes:

Bug fix: in version 2, the undercatch correction was not applied correctly

Bug fix: in version 2, snow lysimeter data was missing for extended periods of time

Update: dataset extended to 2016-01-02T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: SNOWPACK ini file (old syntax)

en: This ini-file can be used to run SNOWPACK simulations with the WFJ data set, using version 3.4.0 or higher.

en: Version 6

en:
Deprecated version.

Release notes:

- Missing ISWR for 2009-09-30 and 2010-04-30 has been replaced by data from WFJ Gipfel

This dataset is the basis for the Weissfluhjoch dataset in ESM-SnowMIP (doi: http://dx.doi.org/10.16904/16).

en: SNOWPACK ini file (new syntax)

en: This ini-file can be used to run SNOWPACK simulations with the WFJ data set, using the new MeteoIO Filter, Generator and Interpolation syntax.

en: Version 7 (current)

en:
Release notes:

Bug fix: in previous versions, snow lysimeter data from September 2010 onwards was erroneously reported for UTC+2, instead of UTC+1 (i.e., reported one hour later than should have been).

Update: dataset extended to 2017-07-11T00:30.

en:
Dataset of meteorological and snowpack measurements from the automatic weather station at Weissfluhjoch, Davos, Switzerland, suitable for driving snowpack models. The dataset contains standard meteorological measurements, and additionally snowpack runoff data from a snow lysimeter. Where possible, data is quality checked and missing data are replaced from backup sensors from the measurement site itself, or (in only a few cases) from the MeteoSwiss weather station at 470 m distance and 150 m above the measurement site.

Publication
Wever, N., Schmid, L., Heilig, A., Eisen, O., Fierz, C., and Lehning, M. Verification of the multi-layer SNOWPACK model with different water transport schemes. 2015. The Cryosphere. Volume 9. 2271-2293. http://dx.doi.org/10.5194/tc-9-2271-2015.

air-temperature

display_name: air-temperature

humidity

display_name: humidity

longwave-radiation

display_name: longwave-radiation

precipitation-amount

display_name: precipitation-amount

shortwave-radiation

display_name: shortwave-radiation

snow-depth

display_name: snow-depth

snow-ice-temperature

display_name: snow-ice-temperature

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: WFJ_MOD: Meteorological and snowpack measurements from Weissfluhjoch, Davos, Switzerland


maintainer: James W. Kirchner

en: evapotranspiration ecohydrology diel-cycle streamflow snowmelt diurnal-cycle sap-flow groundwater

en: Daily time series

media_type: text/plain

en: Daily hydrometeorological and ecohydrological time series

mimetype: text/plain

en: Subcatchment polygons

en: Subcatchment polygons for use in the Google Earth Engine scripts.

en: MODIS NDSI script

en: Google Earth Engine script for computing MODIS normalized difference snow index (NDSI) values and averaging them over subcatchment areas.

en: Metadata

en: Column descriptions for both data files, and map coordinates for all measurement locations.

en: MODIS EVI2 script

en: Google Earth Engine script for computing MODIS two-band enhanced vegetation index (EVI2) values and averaging them over subcatchments.

en: 30-minute time series

en: 30-minute hydrometeorological and ecohydrological time series.

en:
Hydrometerological and ecohydrological time series from Sagehen Creek and Independence Creek, Sierra Nevada, USA, illustrating hydrological responses to daily cycles in snowmelt and evapotranspiration forcing.

Data include 30-minute time series of

- weather variables,

- sap flow fluxes,

- groundwater levels (in two riparian transects of shallow groundwater wells),

- and stream stages (at 12 sites spanning a 500-meter elevation gradient),

and daily time series of

- temperature, precipitation, and snow water equivalent at three nearby snow telemetry stations

- diel cycle index values for groundwater levels and stream stages,

- and MODIS normalized difference snow index (NDSI) and enhanced vegetation index (EVI2) values averaged over selected subcatchments.

Google Earth Engine scripts for extracting the MODIS data are also provided.

diel-cycle

display_name: diel-cycle

diurnal-cycle

display_name: diurnal-cycle

ecohydrology

display_name: ecohydrology

evapotranspiration

display_name: evapotranspiration

groundwater

display_name: groundwater

sap-flow

display_name: sap-flow

snowmelt

display_name: snowmelt

streamflow

display_name: streamflow

en: Daily cycles in solar flux, snowmelt, transpiration, groundwater, and streamflow at Sagehen and Independence Creeks, Sierra Nevada, USA


en: place-attachment electrodermal-activity sense-of-place landscape urban-ecology

en: 03. Publication Ready Data

en: 04. Scripts

en: 00. EDA Raw Data

en: 01. EDA Processed Data

en: 05. Visuals

en: 02. Questionnaire Data

en: This repository contains data on EDA measurements of visitors with different cultural backgrounds in virtual urban park settings. The parks are a Persian garden (Shiraz, Iran) and a historical park in Zurich, Switzerland. The cultural background of the visitors is Persian and Central European. The repository contains raw data from EDA, processed time series and statistical procedures.

electrodermal-activity

display_name: electrodermal-activity

landscape

display_name: landscape

place-attachment

display_name: place-attachment

sense-of-place

display_name: sense-of-place

urban-ecology

display_name: urban-ecology

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Electrodermal Activity (EDA) of Bi-cultural Visitors In Virtual Park Settings


automatic-classification-of-avalanches

maintainer: Alec van Herwijnen

title_for_slug: automatic-classification-of-avalanches

en: avalanche monitoring localization seismic machine-learning

media_type: application/x-tar

en:
This tar file contains classification results for two seismic geophone arrays deployed above Davos, Switzerland. The of the first array located at the Dischma Valley was used to automatically identify all seismic events produced by avalanches, whereas the classification perfomed at the second array located at the Wannengrat field site was used to identify airplanes and earthquakes.
Furthermore, this tar file also contains the median back-azimuth of all classified events at the Dischma field site.

en: This dataset contains the classification and localization results obtained during the automatic classification of avalanches during the winter season 2017.

avalanche

display_name: avalanche

localization

display_name: localization

machine-learning

display_name: machine-learning

monitoring

display_name: monitoring

seismic

display_name: seismic

en: Automatic Classification of Avalanches


lwf-tea-bag-sites

maintainer: Marcus Schaub

title_for_slug: lwf-tea-bag-sites

en: green-tea roiboos litter carbon forest tea-bag decomposition verification modeling

en: Site Information

media_type: text/csv

en: Descriptive information on sites

mimetype: text/csv

en:
Decomposition of plant litter is a key process for the transfer of carbon and nutrients in ecosystems. Carbon contained in the decaying biomass is released to the atmosphere as respired CO2, and may contribute to global warming. Litterbag studies have been used to improve our knowledge of the drivers of litter decomposition, but they lack comparability because litter quality is plant species-specific. The use of commercial tea bags as a standard substrate was suggested in order to harmonize studies, where green tea and rooibos represent more labile and more recalcitrant C compounds as surrogates of local litter.
The tea bag approach was implemented on eight sites of the Swiss long-term Forest Ecosystem Research (LWF) network (https://www.wsl.ch/LWF). This allowed us to take advantage from the existing infrastructure and data from a previous litterbag study with local litter. In Beatenberg and Schaenis, additional elevation transects were established (1200-1800 m and 540-1150 m, respectively) to examine particularly the effect of temperature on decomposition. In Pfynwald (https://www.wsl.ch/de/ueber-die-wsl/versuchsanlagen-und-labors/flaechen-im-wald/pfynwald.html) and Salgesch, infrastructure of running projects was used to examine the effect of drought and understory removal, respectively. In Novaggio, tea bags were incubated in summer and winter to study the effect of seasonality particularly precipitation. Tea bags are collected after 3, 12, 24, and 36 months; for the two time-shifted experiments additionally after 6 and 9 months.
The study has two primary objectives. Firstly, it contributes to TeaComposition initiative (http://teacomposition.org/) which aims at investigating long-term litter decomposition and its key drivers at present as well as under different future climate scenarios using a common protocol and standard litter (tea) across nine terrestrial biomes. Secondly, the data are used to further develop decomposition models such as Yasso (http://en.ilmatieteenlaitos.fi/yasso) which is used by several countries, including Switzerland to estimate the annual carbon fluxes in dead wood, litter, and soil for reporting in National Greenhouse Gas Inventories under the United Nations Framework Convention on Climate Change and the Kyoto Protocol.

carbon

display_name: carbon

decomposition

display_name: decomposition

forest

display_name: forest

green-tea

display_name: green-tea

litter

display_name: litter

modeling

display_name: modeling

roiboos

display_name: roiboos

tea-bag

display_name: tea-bag

verification

display_name: verification

en: LWF-Tea bag sites


en: radiation atmospheric-conditions wind precipitation temperature-profiles

en: Site photo 3

media_type: JPEG

en: This site photo is outdated and has been replaced with an updated version (see description).

en: Site photo 1

en: Overview plot

media_type: PNG

en: This overview plot is outdated and has been replaced with an updated version (see description).

format: PNG

en: Latest data from Stillberg climate station

media_type: smet

en: This dataset is outdated and has been replaced with an updated version (see description).

en: Site photo 2

en: STB2 CSV

en: README

en: This description is outdated and has been replaced with an updated version (see description).

en: DATA ACCESS

en: This data access is outdated and has been replaced with an updated version (see description).

en:
 Important
This EnviDat entry is outdated. The most recent, usable version of the data can be found under the new EnviDat entry "Long-term meteorological station Stillberg, Davos, Switzerland at 2090 m a.s.l.." The entry can be found under this link <https://www.envidat.ch/dataset/meteo-stillberg> and with this DOI 10.16904/envidat.396.

atmospheric-conditions

display_name: atmospheric-conditions

precipitation

display_name: precipitation

radiation

display_name: radiation

temperature-profiles

display_name: temperature-profiles

wind

display_name: wind

en: Long-term meteorological and snow station at 2090 m a.s.l., Stillberg, Davos, Switzerland (1975 - present)


en: patchy-snow-covers riegl-vz6000 tls snow-ablation-rates terrestrial-laser-scanning

en: Digital Elevation Modell 2015

en: Snowmask 2015

en: Gletschboden test site

en: Digital Elevation Modell 2014

en: Digital Elevation Modell 2016

en: Snowmask 2014

en: Snowmask 2016

en: We recorded snow ablation maps with a terrestrial laser scanner (TLS, Riegl-VZ6000) at the Gletschboden area. The TLS position is located approximately 30 vertical meters above the Gletschboden area at a northerly exposed slope. In total 44 TLS measurement sets have been conducted in three consecutive years 2014-2016 (2014: 13 measurements; 2015: 17 measurements; 2016: 14 measurements). The TLS system has a single-point measurement frequency of 300 kHz and a beam divergence of 0.007°. This set-up allows a horizontal resolution of approximately 0.01 m in 100 m distance to the TLS position. One scan of the Gletschboden area lasts approximately 15 minutes. The travel time from the laser scanner towards the surface is recorded and afterwards converted into a point cloud of distances. 5 reflectors located at the Gletschboden area and in the closer surroundings were additionally scanned during each measurement to transform the point cloud from the scanner own coordinate system into Swiss coordinates. Additionally, orthophotos have been created by using pictures recorded from the TLS in order to provide snow mask maps. Snow and bare ground can be distinguished by the RGB color information of the orthophoto. Cells with blue band information greater than 175 were categorized as snow and all cells with values smaller or equal 175 were categorized as bare ground.

patchy-snow-covers

display_name: patchy-snow-covers

snow-ablation-rates

display_name: snow-ablation-rates

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

tls

display_name: tls

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: DISCHMEX - High-resolution daily snow ablation rates in an Alpine environment


en: avalanche-activity time-lapse-photography glide-snow-avalanche snowpack-simulation avalanche

en: README

media_type: .txt

en: README.txt explaining the dataset and columns of tables in more detail.

en: SNOWPACK simulations

media_type: .pro

en: SNOWPACK simulations (.pro and .smet) covering season 2008/09 to 2021/22 at 10 virtual locations on Dorfberg. The locations correspond to the most common glide-snow avalanche paths.

en: Glide-snow avalanche activity

media_type: .csv

en: Table that contains all glide-snow avalanche events that were detected in time-lapse photographs (season 2008/09 to 2021/22). The columns are explained in the README.txt

en: Glide distances for opening glide-cracks

media_type: zip-compressed folder of csv

en: This folder contains all glide-cracks where glide-distances were extracted from time-lapse photographs. Glide-distances were calculated in x-direction (width) and y-direction (downslope, length) by georeferencing the images.

en:
This dataset includes the processed data of the glide-snow avalanche activity and dynamics on Dorfberg (Davos, Switzerland) covering seasons 2008/09 to 2021/22. This dataset was described in the research article:

Fees, A., van Herwijnen A., Altenbach, M., Lombardo, M., Schweizer, J.: Glide-snow avalanche characteristics at different time-scales extracted from time-lapse photography, Annals of Glaciology, 91

We extracted the dynamics of opening glide-cracks and the glide-snow avalanche activity from time-lapse photographs. Glide-snow avalanches were separated into surface and interface events using the liquid water content which was simulated with SNOWPACK at 10 virtual stations on Dorfberg.

avalanche

display_name: avalanche

avalanche-activity

display_name: avalanche-activity

glide-snow-avalanche

display_name: glide-snow-avalanche

snowpack-simulation

display_name: snowpack-simulation

time-lapse-photography

display_name: time-lapse-photography

en: Glide-snow avalanche activity on Dorfberg, Davos, Switzerland


maintainer: Athanasios Nenes

en: cloud-modeling supersaturation ccn dmt-ccn-chamber sigma-w hygroscopicity weissfluhjoch raclets cloud-droplets

en: Predicted cloud droplet number concentrations Weissfluhjoch

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Weissfluhjoch station between February 24 and March 8 2019. For this, a hygroscopicity parameter of 0.25 is assumed, according to the CCN-derived values. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Hygroscopicity parameter Weissfluhjoch

en:
The aerosol hygroscopicity parameter is derived combining the CCN and SMPS size distribution data collected between February 24 and March 8 2019 at Weissfluhjoch. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The instrument supersaturation (SS%)
* The calculated hygroscopicity parameter (kappa)
* The calculated critical dry diameter of the particles (Dcr) in nm.

Missing values are indicated by "-999".

en: CCN data Weissfluhjoch

en:
In-situ CCN measurements were conducted between February 24 and March 8 2019 at Weissfluhjoch. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* Filtered CCN number concentrations (in cmˉ³) measured at 6 discrete supersaturations (SS) ranging from 0.09% to 0.74%. The name of each CCN column is indicative of the SS developed within the instrument.
* Instrument characteristics such as sample temperature (in °C) and pressure (in mbar)
* A code that refers to the reason of filtering.

Missing or filtered CCN values are indicated by "-999", while a declaration of each "Error_code" can be found in the following list:

_Error_code_:

0000: Measurements without error

1000: Period of transient operation after a supersaturation change

2000: Sharp change (decrease) in the room temperature housing the instrument, which induces a reset in column temperature

3000: Irregular values in the room temperature housing the instrument

9999: Missing data

en:
Cloud Condensation Nuclei (CCN) data: A Droplet Measurement Technologies (DMT) single-column continuous-flow streamwise thermal gradient chamber (CFSTGC; Roberts and Nenes, 2005) was deployed at the measurement site Weissfluhjoch (2700 m a.s.l., LON: 9.806475, LAT: 46.832964) to record the in-situ CCN number concentrations between February 24 and March 8 2019 for different supersaturations (SS). To account for the difference between the ambient (~735 mbar) and the calibration pressure (~800 mbar), the SS reported by the instrument is adjusted by a factor of 0.92. The CFSTGC was cycled between 6 discrete SS values ranging from 0.09% to 0.74%, producing a full CCN spectrum every hour. The raw CCN measurements are filtered to discount periods of transient operation and whenever the room temperature housing the instrument changed sufficiently to induce a reset in column temperature. Additional information can be found in Section 2.1.2 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

Hygroscopicity data: The CCN number concentration measurements were directly related to the size distribution and total aerosol concentration data measured by the Scanning Mobility Particle Size Spectrometer (SMPS) instrument at the same station (https://www.envidat.ch/dataset/aerosol-data-weissfluhjoch) to infer the particles hygroscopicity parameter (kappa). For each SMPS scan, the particles critical dry diameter (Dcr) is estimated by integrating backward the SMPS size distribution, until the aerosol number matches the CCN concentration observed for the same time period as the SMPS scan. Assuming the particle chemical composition is internally mixed, the kappa is determined from Dcr and SS, applying Köhler theory. Additional information can be found in Section 2.2 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

Predicted cloud droplet numbers: Droplet calculations are carried out with the physically based aerosol activation parameterization of Morales and Nenes (2014), employing the “characteristic velocity” approach of Morales and Nenes (2010). Aerosol size distribution observations required to predict the cloud droplet numbers and maximum in-cloud supersaturation are obtained from the SMPS instrument deployed at Weissfluhjoch. The required vertical velocity measurements are derived from the wind Doppler Lidar (https://www.envidat.ch/dataset/lidar-wind-profiler-data) deployed at Davos Wolfgang and are extracted for the altitude of interest, being 1100 m above ground level for Weissfluhjoch. Additional information can be found in Section 2.3 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

ccn

display_name: ccn

cloud-droplets

display_name: cloud-droplets

cloud-modeling

display_name: cloud-modeling

dmt-ccn-chamber

display_name: dmt-ccn-chamber

hygroscopicity

display_name: hygroscopicity

raclets

display_name: raclets

sigma-w

display_name: sigma-w

supersaturation

display_name: supersaturation

weissfluhjoch

display_name: weissfluhjoch

en: CCN, hygroscopicity, predicted cloud droplet numbers Weissfluhjoch


maintainer: Matthias Haeni

en: wind-speed par meteo long-term temperature climate-change swiss-forest-lab meteorology relative-humidity precipitation

en: Site photo of the forest station (CIB)

media_type: image/jpeg

en: Site photo of the forest station from below (viewing upwards the slope).

mimetype: image/jpeg

en: Data plot of the field station (CIF)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Forest station data (CIB)

en: Data file.

en: Site photo of the field station (CIF)

en: Site photo of the field station from the side.

en: Data plot of the forest station (CIB)

en: Site aerial photo (Chironico)

en: Site aerial photo from both Chironico stations. Source: Google. 2016. Site aerial photo from both Chironico stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Chironico in Switzerland where one station is located within a natural coniferous forest stand (CIB) with Norway spruce (_Picea abies_; 160-180 yrs) and European silver fir (_Abies alba_; 140-160 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, CIF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Chironico is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Chironico, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 2000 onwards


maintainer: Elisabeth Hafner

en: validation satellite avalanche snow avalanche-hazard-mapping

en: Satellite Avalanche Mapping Validation data and data description

media_type: ZIP

en: 14 shapefiles to be used only together with the data description also provided as a pdf.

en:
Validation points, validation area, ground truth coverage, SPOT 6 avalanche outlines, Sentinel-1 avalanche outlines, Sentinel-2 avalanche outlines, Davos avalanche mapping (DAvalMap) avalanche outlines as shapefiles and a detailed attribute description (DataDescription_EvalSatMappingMethods.pdf).

Coordinate system: CH1903+_LV95

The generation of this dataset is described in detail in:

Hafner, E. D., Techel, F., Leinss, S., and Bühler, Y.: Mapping avalanches with satellites – evaluation of performance and completeness, The Cryosphere, https://doi.org/10.5194/tc-2020-272, 2021.

avalanche

display_name: avalanche

avalanche-hazard-mapping

display_name: avalanche-hazard-mapping

satellite

display_name: satellite

snow

display_name: snow

validation

display_name: validation

en: Satellite avalanche mapping validation data


maintainer: Achille Capelli

en: swe liquid-water-content lwc snow-water-equivalent snow gnss gps

en: GNSS derived SWE, HS, and LWC for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Daily data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Snow and meteo data from automatic sensors from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: GNSS derived data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Snow and meteo data from automatic sensors for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Daily observer data from automatic sensors from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: Daily data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Daily observer data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Daily data from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Daily observer data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: Profile data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Snow profiles data from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: Manual profiles

media_type: .zip

en: Data of the traditional manual profiles for the locations Weissfluhjoch, Klosters and Küblis. For the location of Küblis there are no traditional manual profile data. We provided the data as both PDF and .CAAML format (See https://niviz.org/ or http://caaml.org/Schemas/V5.0/Profiles/SnowProfileIACS/CAAMLv5_SnowProfileIACS.pdf). Moreover, we added LWC and density profiles when available (all locations).

en: Snow profiles data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Daily data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Snow and meteo data from automatic sensors from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: Snow and meteo data from automatic sensors for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Webcam images

en: Webcam images showing some typical differences in the snow conditions at the four sites (Küblis, Klosters, Laret and Weissfluhjoch) for two time periods (14-18.3.2019 and 27.1-11.2.2020). Both time periods included a precipitation event with partial rain-on–snow occurring at the lower locations.

en: Snow profiles data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: GNSS derived SWE, LWC and HS from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-20

en: GNSS derived SWE, LWC and HS from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-20

en: This database contains GNSS derived snow water equivalent (SWE), liquid water content (LWC), and snow height (HS) and reference data collected during the two winter 2018-2020 at 4 sites Weissfluhjoch (2540 m asl, 46°49’47’’ N, 9°48’34’’E), Laret (1515 m asl, . 46°50’2’’N, 9°52’17’’E), Klosters (1200 m asl, 46°51’49’’N, 9°53’17’’E), and Küblis (815 m asl, 46°54’48’’N, 9°46’54’’E).

gnss

display_name: gnss

gps

display_name: gps

liquid-water-content

display_name: liquid-water-content

lwc

display_name: lwc

en: Snow water equivalent measurements with low-cost GNSS receivers along a steep elevation gradient in the East-ern Swiss Alps


en: verification avalanche-bulletin avalanche-forecast avalanche-danger-level avalanche-forecasting

en: D_QC for forecasting seasons 2020/2021 - 2022/2023.

en: D_QC for forecasting seasons 2001/2002 until 2019/2020.

en:
The data set contains the re-analyzed (or quality-checked) regional avalanche danger levels (D_QC) for Switzerland.

D_QC relates to dry-snow avalanche conditions only. Measuring the avalanche danger level D is not possible; forecast, nowcast, and hindcast assessments of D are judgments by humans interpreting data. However, combining several pieces of information indicating the same D, it can be expected that it is more likely that D_QC represents the avalanche conditions well.

For the **forecasting seasons 2001/2002 until 2019/2020**, the approach to obtain D_QC is described in detail in Appendix A of [Pérez-Guillén et. al. (2022)](https://nhess.copernicus.org/articles/22/2031/2022/nhess-22-2031-2022.html).

For the **forecasting seasons 2020/2021 and later**, D_QC is derived using the following approach:
1. *Combination of forecast (D_forecast) and nowcast (D_nowcast)*: If there was only one assessment available by an observer after a day in the field for a region, and if D_forecast = D_nowcast --> D_QC = D_forecast.
2. *Combination of several nowcast assessments (D_nowcast)*: If two (or more) observers agreed (or majority opinion) in their (independent) assessments of D_nowcast after a day in the field in the same warning region. --> D_QC = D_nowcast.
3. *Hindcast analysis (D_hindcast)*: In Switzerland, avalanche forecasters re-evaluate all situations when D = 4 (high) or D = 5 (very high) were either forecast, should have been forecast, or when forecasters discussed given one of these two levels but had not given them. Generally, two forecasters assess each situation. In these cases, D_QC = D_hindcast. The hindcast analysis, only available since the forecasting season 2020/2021, replaces what was step (2) in Appendix A of [Pérez-Guillén et. al. (2022)](https://nhess.copernicus.org/articles/22/2031/2022/nhess-22-2031-2022.html).

All other cases - ties in case of (1) or (2), no new information from the warning region in question, or if no D_hindcast was available - are not considered quality-checked, and are, thus, not contained in the data set.

In addition to D_QC, the file contains information on the elevation and aspect, where D_QC likely prevails.
- The indicated elevation is the mean of the respective elevations in (1), (2), or (3). At danger level 1 (low), when no elevation is indicated in the Swiss forecast, a value of 1500 m is set.
- For the four cardinal aspects N, E, S, and W, a value of 1 means that there was agreement that D was reached in this aspect and a value of 0 means that there was agreement that D was not reached in this aspect. Intermediate values correspondingly mark disagreements in the assessments.

avalanche-bulletin

display_name: avalanche-bulletin

avalanche-danger-level

display_name: avalanche-danger-level

avalanche-forecast

display_name: avalanche-forecast

avalanche-forecasting

display_name: avalanche-forecasting

verification

display_name: verification

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Re-analyzed regional avalanche danger levels in Switzerland


en: rain-on-snow snowpack meteorological-data catchment-data snow-hydrology

en: The file contains all data needed to run simulations with the snow cover model SNOWPACK.

en: Meteorological data used to run SNOWPACK for 58 catchments in the Swiss Alps. The data consists of a 2 km grid of "virtual meteorological stations" for each catchment. It was used to simulate snow cover processes during rain-on-snow events, therefore meteorological data of each catchment contains at least one rain-on-snow event. Further information can be found in the attached readme.txt and in Würzer & Jonas et al. (2017), currently under review in Hydrological Processes.

catchment-data

display_name: catchment-data

meteorological-data

display_name: meteorological-data

rain-on-snow

display_name: rain-on-snow

snow-hydrology

display_name: snow-hydrology

snowpack

display_name: snowpack

en: Meteorological data for investigation of rain-on-snow events in 58 catchments in Switzerland


en: geoinformation-software digital-elevation-model swiss-geodata seilaplan digital-planning swisstopo cable-yarding open-source qgis-plugin

en: View video on youtube!

en: Herunterladen des DHM von swisstopo Website

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. As an alternative to using the ‘Swiss Geo Downloader’ plugin, the DTM can be obtained directly from Swisstopo. In this tutorial we explain step by step how to download the necessary DTM from the Swisstopo Website, and how to use it in QGIS for the digital planning of a cable line using the plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to the elevation model on the swisstopo website: https://www.swisstopo.admin.ch/de/geodata/height/alti3d.html#technische_details

Link to the rope map website: https://seilaplan.wsl.ch

********************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Als Alternative zum Swiss Geo Downloader erklären wir in diesem Tutorial Schritt für Schritt, wie man das nötige Höhenmodell von der Swisstopo Webseite herunterladen und in QGIS zur Seillinienplanung verwenden kann.

Link zum Höhenmodell auf der swisstopo Webseite: https://www.swisstopo.admin.ch/de/geodata/height/alti3d.html#technische_details

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-software

display_name: geoinformation-software

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

swisstopo

display_name: swisstopo

en: Seilaplan Tutorial: DTM download from swisstopo website


en: online-questionnaire-survey visual-attractiveness adults-and-teenagers perception-of-ecosystem-services nfi-photos

en: Questionnaire French

media_type: .pdf

en: SPSS-Dataset

en: Questionnaire Italian

en: Dataset in csv-format

en: Questionnaire German

media_type: PDF

en: Codebook to SPSS-file

en: This questionnaire survey was conducted as an online survey and aimed at investigating the relationship between physical forest characteristics, visual attractiveness of forest and the perception of ecological and cultural ecosystem services in urban forests. Each participant was shown 6 photos out of a pool of 50 photos taken from the Swiss National Forest Inventory (NFI) database. Physical forest characteristics were derived from the photos. The study was conducted as part of the "WaMos meets LFI" (WML) project.

adults-and-teenagers

display_name: adults-and-teenagers

nfi-photos

display_name: nfi-photos

online-questionnaire-survey

display_name: online-questionnaire-survey

perception-of-ecosystem-services

display_name: perception-of-ecosystem-services

visual-attractiveness

display_name: visual-attractiveness

en: Relationship between physical forest characteristics, visual attractiveness and perception of ecosystem services in urban forests


en: water-front snow-stratigraphy ice-layers weissfluhjoch snowmicropen snow-temperature

en: WFJ_ICE_LAYERS dataset

media_type: application/zip

en: README

en: The WFJ_ICE_LAYERS dataset contains multi-instrument snowpack measurements at high temporal resolution, which enable to monitor the formation of deep ice layers due to preferential water flow, at the Weissfluhjoch research site, Davos, Switzerland. It covers the winter 2016/2017, with a focus on the early melting season. This dataset includes traditional snowpack profiles (weekly resolution, 15/11/2016-29/05/2017), SnowMicroPen penetration resistance profiles (daily resolution, 01/02/2017-19/04/2017), snow temperatures measured at different heights in the snowpack (half-hourly resolution, 01/03/2017-15/04/2017) and the water front height derived from an upward-looking ground penetrating radar (3-hour resolution, 04/03/2017-08/04/2017). The measurements are complemented by initialization files for SNOWPACK model simulations with the ice reservoir parameterization at Weissfluhjoch for the winter 2016/2017.

ice-layers

display_name: ice-layers

snow-stratigraphy

display_name: snow-stratigraphy

snow-temperature

display_name: snow-temperature

snowmicropen

display_name: snowmicropen

water-front

display_name: water-front

weissfluhjoch

display_name: weissfluhjoch

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: WFJ_ICE_LAYERS: Multi-instrument data for monitoring deep ice layer formation in an alpine snowpack


en: avalanche snow-instability snow avalanche-forecasting avalanche-danger danger-level

en: Read-me file

en: This read-me file contains the descriptions of the variables.

en: Field observations of snow instabilities

media_type: CSV

en:
This data set includes 589 snow profile observations including a rutschblock test, observations of signs of instability and an assessment of the local avalanche danger level, mainly recorded in the region of Davos (eastern Swiss Alps) during the winter seasons 2001-2002 to 2018-2019.

These data were analyzed and results published by Schweizer et al. (2021). They characterized the avalanche danger levels based on signs of instability (whumpfs, shooting cracks, recent avalanches), snow stability class and new snow height.

The data are provided in a csv file (589 records); the variables are described in the corresponding read-me file.

These data are the basis of the following publication: Schweizer, J., Mitterer, C., Reuter, B., and Techel, F.: Avalanche danger level characteristics from field observations of snow instability, Cryosphere, 15, 3293-3315, https://doi.org/10.5194/tc-15-3293-2021, 2021.

 Acknowlegements
Many of the data were recorded by SLF observers and staff members, among those Roland Meister, Stephan Harvey, Lukas Dürr, Marcia Phillips, Christine Pielmeier and Thomas Stucki. Their contribution is gratefully acknowledged.

avalanche

display_name: avalanche

avalanche-danger

display_name: avalanche-danger

avalanche-forecasting

display_name: avalanche-forecasting

danger-level

display_name: danger-level

snow

display_name: snow

snow-instability

display_name: snow-instability


swiss-fluxnet-site-davos

title_for_slug: swiss-fluxnet-site-davos

en: greenhouse-gas eddy-covariance forest flux icos meteorological-measurements swiss-fluxnet swiss-forest-lab

en: Processed data

en: Processed flux and meteo data are available from the European Fluxes Database Cluster.

en: Site description

en: Data access

en: The flux and meteo data of the Swiss FluxNet site Davos are openly available. Near real-time flux and meteo data are uploaded daily to the ICOS Carbon Portal.

en: Fluxnet2015 dataset

en: Processed flux and meteo data are also part of the Fluxnet2015 dataset.

en:
The Swiss FluxNet Site Davos is a managed subalpine evergreen forest, located on the Seehorn mountain near Davos in the Swiss Alps. The site is dominated by Norway spruce. The tower is owned by the Federal Office for the Environment (FOEN).
Ecosystem flux measurements of CO2, H2O (since 1997) as well as CH4 and N2O (since 2016) are performed with the eddy covariance method.
In addition to Swiss FluxNet, the site is part of the National Air Pollution Monitoring Network (NABEL), the Long term Forest Ecosystem Research (LWF), the biological drought and growth indicator network (TreeNet) and of ICOS Switzerland (Integrated Carbon Observation System). Since November 2019, the site is an ICOS Class 1 Ecosystem station.

Measurements

- Ecosystem flux measurements of CO2, H2O vapour (since 1997) as well a CH4 and N2O (since 2016) are performed with the eddy-covariance method. This method is based on measurements of trace gas mixing ratios, using infrared gas analyzers (for CO2, H2O vapor) and laser spectrometers (for CH4 and N2O), combined with wind speed and wind direction measurements, using 3D sonic anemometers. To resolve the short-term turbulent fluctuations in the atmosphere, very fast measurements are needed: we measure at 10-20 Hz, i.e., 10-20 times per second. To assess the energy budget of each ecosystem, also radiation sensors and soil climate profiles are installed at the site.
- Sub-canopy eddy fluxes (CO2, H2O, since 2023 also CH4).
- Continuous profile concentration and forest floor flux measurement of CO2, H2O, CH4, N2O.
- Auxiliary micrometeorology and soil climate measurements.

Data availability

Near real-time flux and meteo data uploaded daily to the ICOS Carbon Portal. Processed flux and meteo data are also available from the European Fluxes Database Cluster and part of Fluxnet2015 dataset.

Data policy

ICOS data license:
[https://www.icos-cp.eu/data-services/about-data-portal/data-license](https://www.icos-cp.eu/data-services/about-data-portal/data-license)

Detailed site info:
[https://www.swissfluxnet.ethz.ch/index.php/sites/ch-dav-davos/site-info-ch-dav/](https://www.swissfluxnet.ethz.ch/index.php/sites/ch-dav-davos/site-info-ch-dav/)

eddy-covariance

display_name: eddy-covariance

flux

display_name: flux

forest

display_name: forest

greenhouse-gas

display_name: greenhouse-gas

icos

display_name: icos

meteorological-measurements

display_name: meteorological-measurements

swiss-fluxnet

display_name: swiss-fluxnet

swiss-forest-lab

display_name: swiss-forest-lab

en: Swiss FluxNet Site Davos