en: relative-humidity solar-radiation soil-water-balance temperature growing-degree-days precipitation growing-season-length

en: CHELSA-BIOCLIM+

media_type: geotiff

en: Global extented set of bioclimatic variables at different temporal (e.g. monthly, annual, long term normals) resolution in Geotiff format.

format: GeoTIFF

en: CHELSA-BIOCLIM+ Technical Documentation

media_type: PDF

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en: A multitude of physical and biological processes on which ecosystems and human societies depend are governed by climatic conditions. Understanding how these processes are altered by climate change is central to mitigation efforts. Based on mechanistically downscaled climate data, we developed a set of climate-related variables at yet unprecedented spatiotemporal detail as a basis for environmental and ecological analyses. We created gridded data for near-surface relative humidity (hurs), cloud area fraction (clt), near-surface wind speed (sfcWind), vapour pressure deficit (vpd), surface downwelling shortwave radiation (rsds), potential evapotranspiration (pet), climate moisture index (cmi), and site water balance (swb), at a monthly temporal and 30 arcsec spatial resolution globally starting 1980 until 2018. At the same spatial resolution, we further estimated climatological normals of frost change frequency (fcf), snow cover days (scd), potential net primary productivity (npp), growing degree days (gdd), and growing season characteristics for the periods 1981-2010, 2011-2040, 2041-2070, and 2071-2100, considering three shared socioeconomic pathways (SSP126, SSP370, SSP585) and five Earth system models. Time-series variables showed high accuracy when validated against observations from meteorological stations. Climatological normals were also highly correlated to observations although some variables showed notable biases, e.g., snow cover days (scd). Together, the data sets presented here allow improving our understanding of patterns and processes that are governed by climate, including the impact of recent and future climate changes on the world’s ecosystems and associated services to societies.

growing-degree-days

display_name: growing-degree-days

growing-season-length

display_name: growing-season-length

soil-water-balance

display_name: soil-water-balance

solar-radiation

display_name: solar-radiation

en: CHELSA-BIOCLIM+ A novel set of global climate-related predictors at kilometre-resolution


disdrometer-data-laret

maintainer: Daniel Wolfensberger

title_for_slug: disdrometer-data-laret

en: hydrometeors raclets visibility disdrometer precipitation

state: active

type: dataset

en: Disdrometer Data Laret

media_type: application/zip

en: The zip folder contains one netCDF file per day for Laret from February 7 to March 29 2019 with a temporal resolution of 30 seconds (time in UTC). The naming convention for the files is Laret_YYYYMMDD.nc and the files include the following: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

format: ZIP

mimetype: application/zip

en:
A laser optical disdrometer (Parsivel² , OTT Hydromet) was used to measure hydrometeors by extinction when passing a laser beam. The instrument can classify eight different kinds of precipitation, including rain, hail, snow, drizzle, and hybrid forms.
The dataset contains information on precipitation amount and type for the period of February 7 to March 29 2019 in Laret.

disdrometer

display_name: disdrometer

hydrometeors

display_name: hydrometeors

precipitation

display_name: precipitation

raclets

display_name: raclets

visibility

display_name: visibility

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester


maintainer: EnviDat Support

en: wind-direction wind-velocity raclets wind wind-speed anemometer

en: Sonic time

media_type: npy

en: The data set contains the time in YYYY-mm-dd HH:MM:SS.sss for the anemometer data. The time is given in UTC+1.

format: SERVICE

en: Sonic temperature

en: The data set contains values of temperature (°C) measured with the anemometer at a sampling frequency of 20 Hz.

en: Sonic wind component u

en:
The data contains values for u direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component w

en:
The data contains values for w direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component v

en:
The data contains values for v direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: A Young 81000 sonic anemomenter was deployed at Gotschnagrat (LON: 46.859 LAT: 9.849) to record three components of the wind velocity (u, v, w in [m s‾ ¹]) and air temperature (Ts in [°C]). The anemomenter was mounted in direction North at a height of 1.5 m above snow surface at the beginning. The time within each data set is given in UTC+1. Instrument specifications can be found [here](http://www.youngusa.com/Manuals/81000-90(I).pdf) .

anemometer

display_name: anemometer

wind

display_name: wind

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

wind-velocity

display_name: wind-velocity

en: Snow Drift Station - 3D Ultrasonic


causal-effect-of-mfoz

title_for_slug: causal-effect-of-mfoz

en: the-major-function-oriented-zone causality built-up-land-change fujian-province propensity-score-matching selection-bias

en: Data and Stata code for repeating the results

media_type: ZIP

en:
Data.xlsx is the variables of 952 townships
Table 1-2 NN(1-1)_noreplace_caliper(0.01).do is STATA code to produce the results in Table 1 and 2
Figure 5 Distribution of the propensity scores.R is R code rto produce Figure 5
Figure 5 Standard mean difference.R is R code rto produce Figure 5

en:
Title: Closer to causality: How effective is spatial planning in governing built-up land expansion in Fujian Province, China?

Research objective: The Major Function Oriented Zone (MFOZ), the first strategic spatial plan in China, is developed to achieve a coordinated regional development, through spatial regulation and zoning of development. The MFOZ he MFOZ divided land into four major function-oriented zones: The development-optimized zone, the development-prioritised zone, the development-restricted zone, and the development-prohibited zone. We used propensity score marching to evaluate the effect of the MFOZ on built-up land expansion in Fujian Province over three time intervals (2013–2015, 2013–2018 and 2013–2020).

Data: Data.xlsx contains the variables of 954 towns in Fujian Province.
Town_ID is the town unique ID;
County_ID is the county unique ID;
City_ID is the city unique ID;
MFOZ is the the development-prioritised zone and the development-restricted zone (The development-optimized zone and the development-prohibited zone are excluded);
Builtup_13_15 is the built-up land expansion from 2013 to 2015;
Builtup_13_18 is the built-up land expansion from 2013 to 2018;
Builtup_13_20 is the built-up land expansion from 2013 to 2020;
Dis2water is the Euclidean distance from the town to the nearest waterbody;
Slope is the the average slope within the town;
GDP is the average GDP in 2010 within the town;
Pop is the average population in 2010 within the town;
Road is the average population in 2010 within the town;
Dis2city is the Euclidean distance from the town to the nearest prefectural city centre;
Nei_Arable, Nei_Forest, and Nei_Built.up are the area of arable land, forest land, and built-up land neighbouring town i in 2010.

Method: we used the propensity score matching to compare the changes in the amount of built-up land in the towns of the development-prioritised zone with the matched towns of the development-restricted zone. Additionally, we used three evaluation intervals (2013–2015, 2013–2018 and 2013–2020) to evaluate temporal variation in the causal effect of the MFOZ on built-up land expansion.

built-up-land-change

display_name: built-up-land-change

causality

display_name: causality

fujian-province

display_name: fujian-province

propensity-score-matching

display_name: propensity-score-matching

selection-bias

display_name: selection-bias

the-major-function-oriented-zone

display_name: the-major-function-oriented-zone

en: Causal effect of MFOZ


mountain-permafrost-hydrology

maintainer: Jeannette Noetzli

title_for_slug: mountain-permafrost-hydrology

en: permafrost-degradation mass-movements mountain-permafrost-hydrology climate-change-impacts ice-rich-permafrost monitoring-techniques

en: Synthesis report chapter of the Hydro-CH2018 project of the Federal Office for the Environment (FOEN)

format: PDF

en: DORA Persistent URL

en: This report was prepared as one of the synthesis report chapters of the Hydro-CH2018 project of the Federal Office for the Environment (FOEN). In earlier reports such as the CH2014-IMPACTS report (CH-Impacts 2014), the topic of mountain permafrost hydrology was not addressed. Here, we provide a baseline of the available knowledge of mountain permafrost in the Swiss Alps for future reference. We compile an overview of the current understanding of mountain permafrost in the Swiss Alps, its distribution and characteristics, observed and projected changes, and expected impacts on slope stability, infrastructure and hydrological aspects. We also briefly describe the measurement techniques and modelling approaches applied. The chapter closes with a summary of the most important open research questions. The literature cited mainly includes studies on mountain permafrost published in scientific journals and assessments of long-term observation data. We focus on permafrost hydrology interactions wherever information is available. However, systematic studies on permafrost hydrology in mountain areas are still limited.

climate-change-impacts

display_name: climate-change-impacts

ice-rich-permafrost

display_name: ice-rich-permafrost

mass-movements

display_name: mass-movements

monitoring-techniques

display_name: monitoring-techniques

mountain-permafrost-hydrology

display_name: mountain-permafrost-hydrology

permafrost-degradation

display_name: permafrost-degradation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Mountain Permafrost Hydrology


lidar-davos-wolfgang

maintainer: Patric Seifert

title_for_slug: lidar-davos-wolfgang

en: polly tropos clouds lidar raclets

en: Raman Lidar Davos

en: A portable Raman lidar system (Polly) from Leibnitz Institute for Tropospheric Research (Tropos) was deployed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Please use this [link](http://polly.tropos.de/?p=lidarzeit&Ort=39), to be directly forwarded to the Davos location and select the date of interest from the calendar (bold numbers). The data can be requested directly at the Polly team.

clouds

display_name: clouds

lidar

display_name: lidar

polly

display_name: polly

raclets

display_name: raclets

tropos

display_name: tropos

en: LIDAR Davos Wolfgang


maintainer: Franziska Koch

en: snow snow-cover gps liquid-water-content snow-depth

en: Read-me

media_type: application/pdf

en: The read-me file contains the description of the data provided.

mimetype: application/pdf

en: Dataset with GPS-derived snow cover properties and validation data

media_type: text/csv

en: This file includes the data as described in the Read-me file.

format: CSV

mimetype: text/csv

en:
This data set includes GPS-derived snow water equivalent (SWE), snow depth (HS) and liquid water content (LWC) data for three entire snow-covered seasons (2015-2016, 2016-2017, 2017-2018) at the study plot Weissfluhjoch 2540 m a.s.l. (Davos, Switzerland). The procedure to derive these snow properties is described in Koch et al. (2019). The novel approach is based on a combination of GPS signal attenuation and time delay.

The dataset also includes corresponding validation data for SWE and HS measured at Weissfluhjoch, and some additional meteorological data used for interpretation of the snow cover evolution.

Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
> Koch, F., Henkel, P., Appel, F., Schmid, L., Bach, H., Lamm, M., Prasch, M., Schweizer, J., and Mauser, W., 2019. Retrieval of snow water equivalent, liquid water content and snow height of dry and wet snow by combining GPS signal attenuation and time delay. Water Resources Research, 55(5), 4465-4487. https://doi.org/10.1029/2018WR024431

gps

display_name: gps

liquid-water-content

display_name: liquid-water-content

snow

display_name: snow

snow-cover

display_name: snow-cover

snow-depth

display_name: snow-depth

en: GPS-derived data of SWE, HS and LWC and corresponding validation data


maintainer: Marcia Phillips

en: ritigraben borehole permos meteo-station permafrost

en: DATA ACCESS

media_type: SMET

en: Meterological station at the [Ritigraben permafrost borehole](http://www.envidat.ch/dataset/rit1) (RIT_0102) in canton Valais, Switzerland. The station is located at 2690 m asl on a flat site.

borehole

display_name: borehole

meteo-station

display_name: meteo-station

permafrost

display_name: permafrost

permos

display_name: permos

ritigraben

display_name: ritigraben

en: RIT2: Meteorological station at Ritigraben borehole site


maintainer: Dirk Nikolaus Karger

en: free-climate-data bioclim climatology climate-layers climate-change climate precipitation temperature

en: CHELSA Technical Documentation

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en: CHELSA V1.2 (deprecated)

en: CHELSA Version 1.2 based on ERA-Interim forcings and CMIP5

en: CHELSA V2.1 (current)

en: CHELSA Version 2.1 based on ERA5 forcings and CMIP6

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present the CHELSA (Climatologies at high resolution for the earth’s land surface areas) data of downscaled temperature and precipitation to a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperatures. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height, with a subsequent bias correction.

CHELSA data published in EnviDat includes the deprecated version 1.2 (originally published under 10.5061/dryad.kd1d4). Please use the current 2.1 version.

Paper Citation:
 > _Karger DN. et al. Climatologies at high resolution for the earth’s land surface areas, Scientific Data, 4, 170122 (2017) [doi: 10.1038/sdata.2017.122](https://doi.org/10.1038/sdata.2017.122)._

bioclim

display_name: bioclim

climate

display_name: climate

climate-change

display_name: climate-change

climate-layers

display_name: climate-layers

climatology

display_name: climatology

free-climate-data

display_name: free-climate-data

precipitation

display_name: precipitation

temperature

display_name: temperature

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Matthias Haeni

en: swiss-forest-lab long-term climate-change relative-humidity meteorology par precipitation temperature wind-speed meteo

en: Data plot of the forest station (BTB)

en: Data file.

en: Site aerial photo (Bettlachstock)

media_type: image/jpeg

en: Site aerial photo from both Bettlachstock stations. Source: Google. 2016. Site aerial photo from both Bettlachstock stations. Retrieved November 11, 2016, from https://www.google.ch/maps

mimetype: image/jpeg

en: Data plot of the field station (BTF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Field station data (BTF)

en: Site photo of the field station (BTF)

en: Site photo of the field station from the side.

en: Site photo of the forest station (BTB)

en: Site photo of the forest station from the side.

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Bettlachstock in Switzerland where one station is located within a natural mixed forest stand (BTB) with European beech (_Fagus sylvatica_; 170-190 yrs), European silver fir (_Abies alba_; 190 yrs) and Norway spruce (_Picea abies_; 200 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BTF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Bettlachstock is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

wind-speed

display_name: wind-speed

en: Bettlachstock, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Axel Volkwein

en: rockfall impact-testing natural-hazard experiment experiments field-data field-test field-tests mass-movements rockfall-experiments

en: Raw data (high speed videos, acceleration measurements, laboratory tests)

en:
This file contains

* the high speed videos showing the concrete blocks impacting the gallery roof.
* the raw data of the acceleration measurements
* the data of Tiefbauamt Graubünden containg the tension tests of gallery reinforcment, ME-testing the cushion layer and the tests on concrete samples.

en: Video analysis

en: The zip contains five Excel-files that in turn contain the results of the performed video analyses. The sheet "Daten" contains the pixels of different positions on the blocks that were tracked by the software "Kinovea". The sheet "Auswertung" determines the block kinetics based on the pixel data over time.

en: Acceleration measurements

en: The zip file contains five excel files, one for each test conducted. The first sheet contains the raw data and a data set that went through a low-pass filter. The sheet "Allgemein" contains calibration factors for the sensors and time details of a test. The sheets "DiaDaten" and "DiaDatenGefiltert" show the measurements over time. The block and slab kinetics are determined in the sheets "ZeitintegrationBlock" and "ZeitintegrationPlatte". The sheet "VergleichBeschleunigungen" shows the influence of the low-pass-filter and a running average filter on the block accelerations.

en: Five full-scale field tests were conducted with concrete blocks weighting between 800 and 3200 kg being dropped onto the roof of a gallery structure made from reinforced concrete. The impacts were recorded using high-speed video and acceleration measurements at the falling blocks. The dataset contains the raw data as well as the analyses of the block trajectories, i.e. kinetics and dynamics. Setup of the measurements and the analyses conducted are published in Volkwein, A. "Durchführung und Auswertung von Steinschlagversuchen auf eine Stahlbetongalerie", WSL-Berichte, Heft 68, 2018.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

impact-testing

display_name: impact-testing

mass-movements

display_name: mass-movements

natural-hazard

display_name: natural-hazard

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

education

en: Education and science

en: Rockfall gallery testing Parde 2016


snow-drift-station-micro-rain-radar

title_for_slug: snow-drift-station-micro-rain-radar

en: precipitation rain snow radar mountain raclets

en: MRR data of period 3

en: The dataset contains measurements between March 8 and March 13, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: MRR data Period 2

en: The dataset contains measurements between March 5 and March 8, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: MRR data of period 4

en: The dataset contains measurements between March 13 and March 22, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: Parameter MRR

en: The PDF contains additional information on parameters which were set for the certain time periods (time in UTC).

en: MMR Data Period 1

en: The dataset contains measurements between March 1 and March 5, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: The instrument (MRR, Metek) was mounted at Gotschnagrat (LON: 46.859 LAT: 9.849) at a height of 1 m above snow surface (at the beginning of the campaign) with an orientation of 22° with respect to North and a horizontal viewing direction. The sampling time was either 5 s or 10 s, depending on the settings at the specific period. The MRR produces standard outputs like radar reflectivity, doppler velocity, etc., and additional information can be found [here](https://metek.de/de/product/mrr-2/).

mountain

display_name: mountain

precipitation

display_name: precipitation

raclets

display_name: raclets

radar

display_name: radar

rain

display_name: rain

snow

display_name: snow

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow Drift Station - Micro Rain Radar


maintainer: Tessa Hegetschweiler

en: childhood forest teenagers adolescents recreational-activities

en: Dataset survey at schools

en: The dataset of the questionnaire survey at schools in excel format.

format: XLS

en: Dataset comments

en: The codebook to the dataset

en: Survey at schools 2017

en: The dataset of the questionnaire survey at schools in SPSS-format.

en: Questionnaire school survey

en: The questionnaire used in the survey at 8 schools aimed at teenagers in German.

en: The data results from a questionnaire survey conducted at 8 schools in the cantons Zurich, Aargau and St. Gallen. Respondents aged 13-22 years. The aim of the survey was to gain insight into teenagers' relationship to the forest, reasons for visiting or not visiting the forest and activities in the forest.

adolescents

display_name: adolescents

childhood

display_name: childhood

forest

display_name: forest

recreational-activities

display_name: recreational-activities

teenagers

display_name: teenagers

education

en: Education and science

en: Factors influencing teenagers' forest visit frequency


en: precipitation climate-change snowmelt soil-moisture hydrology discharge

en: Daily simulated data for the reference period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the reference period 1981-2017 in mm.

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of the 307 medium-sized catchments in Switzerland. The "gridcode" provides the ID of the catchment used in the datafiles.

en: Daily simulated data for the future period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the period 1981-2100 in mm for the 307 catchments.

en:
Daily discharge and the related hydro-meteorological variables precipitation, snowmelt, and soil moisture are provided for current (1981-2017) and for future climate conditions (1981-2100) for 307 medium-sized catchments in Switzerland. The catchments have a median catchment area of 117 km². The 307 catchments together form a set representative of the climatological conditions and runoff characteristics in Switzerland. The four variables were simulated at a daily resolution using the hydrological model PREVAH. PREVAH is a conceptual process-based model that was run in this study in its fully distributed version on a 500 m grid (Viviroli et al. 2009a). For the calibration, runoff time series from 140 mesoscale catchments covering the different runoff regimes were used. The model calibration was conducted over the period 1993-1997. Verification was performed on the period 1983-2005 using (i) volumetric deviation (Viviroli et al. 2007) and (ii) benchmark efficiency (Schäfli et al 2007) as objective functions. The calibration and validation procedures are described in detail in Köplin et al. (2010). The parameters for each model grid cell were derived by regionalizing the parameters obtained for the 140 catchments with a procedure based on ordinary kriging (Viviroli et al. 2009b, Köplin et al. 2010).
The calibrated and validated model was then driven with transient meteorological data (precipitation, temperature, radiation, and wind) representing both reference (1981-2017) and future climate conditions (2018-2099). The data were derived from the CH2018 climate scenarios (NCCS 2018) provided by the Swiss National Centre for Climate Services (NCCS). They were obtained from climate experiments produced with different climate modeling chains, consisting of a global and a regional circulation model each, within EUROCORDEX for three representative concentration pathways (RCP) emission scenarios. Downscaled output of ten climate model chains derived by quantile mapping were considered. The focus was on the chains of the EUR-11 domain with a horizontal resolution of 0.11 degrees (roughly 12.5 km). The climate model chains (GCM, RCM, RCP, and grid resolution) used are listed below:

- ICHEC-EC-EARTH	DMI-HIRHAM5	2.6	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	4.5	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	8.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	2.6	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	4.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	8.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	4.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	8.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	4.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	8.5	EUR-11

*References*:

-	Köplin, N., D. Viviroli, B. Schädler, and R. Weingartner (2010), _How does climate change affect mesoscale catchments in Switzerland? - A framework for a comprehensive assessment_, Advances in Geosciences, 27, 111-119, doi:10.5194/adgeo-27-111-2010.
-	National Centre for Climate Services (2018), CH2018 - _Climate Scenarios for Switzerland_, Tech. rep., NCCS, Zurich.
-	Schäfli, B., and H. V. Gupta (2007), _Do Nash values have value?_, Hydrological Processes, 21, 2075-2080, doi:10.1002/hyp.6825.
-	Viviroli, D., J. Gurtz, and M. Zappa (2007), _The hydrological modelling system PREVAH. Part II - Physical model description_, Geographica Bernensia, 40, 1-89.
-	Viviroli, D., M. Zappa, J. Gurtz, and R. Weingartner (2009a), _An introduction to the hydrological modelling system PREVAH and its pre- and post-processing-tools_, Environmental Modelling & Software, 24, 1209-1222, doi:10.1016/j.envsoft.2009.04.001.
-	Viviroli, D., H. Mittelbach, J. Gurtz, and R. Weingartner (2009b), _Continuous simulation for flood estimation in ungauged mesoscale catchments of Switzerland-Part II: Parameter regionalisation and flood estimation results_, Journal of Hydrology, 377 (1), 208-225, doi:10.1016/j.jhydrol.2009.08.022.

climate-change

display_name: climate-change

discharge

display_name: discharge

hydrology

display_name: hydrology

snowmelt

display_name: snowmelt

soil-moisture

display_name: soil-moisture

en: Simulated future discharge and climatological variables for medium-sized catchments in Switzerland


snow-drift-station-snow-and-air-data

maintainer: Benjamin Walter

title_for_slug: snow-drift-station-snow-and-air-data

en: raclets snow-temperature temperature snow-depth snow-height snow

en: Snow Depth

en: The snow depth (cm) was measured with a Lufft SHM-31 which was mounted at 1.7 m above ground. The time is given in UTC+1.

en: Relative Humidity

en: The relative humidity (%) was measured with a Campbell CS-215 at a height of 2.2 m above ground. The time is given in UTC+1.

en: Air Temperature

en: The air temperature (°C) was measured with a Campbell CS-215 which was mounted at a height of 2.2 m above ground. The time is given in UTC+1.

en: Snow Surface Temperature

en: The snow surface temperature (°C) was measured with a Campbell SI-111 at 0.7 m above ground. The time is given in UTC+1.

en: Snow and air data was monitored at Gotschnagrat (LON: 46.859 LAT: 9.849) by an infrarot radiometer (Campbell SI-111) for snow temperature (°C), a snow height sensor (Lufft SHM-31) for snow height change (cm) and a temperature and humidity sensor (Campbell CS-215) for air temperature (°C) and relative humidity (%). No filter was applied to the sensors and the smapling frequency was 1 Hz.

snow-depth

display_name: snow-depth

snow-height

display_name: snow-height

snow-temperature

display_name: snow-temperature

temperature

display_name: temperature

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow Drift Station - Snow and Air Data


en: par long-term meteo wind-speed precipitation climate-change relative-humidity meteorology swiss-forest-lab temperature

en: Field station data (BAF)

en: Data file.

en: Data plot of the forest station (BAB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Beatenberg)

en: Site aerial photo from both Beatenberg stations. Source: Google. 2016. Site aerial photo from both Beatenberg stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the field station (BAF)

en: Site photo of the forest station (BAB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Site photo of the field station (BAF)

en: Site photo of the field station from below (viewing upwards the slope).

en: Forest station data (BAB)

en:
High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Beatenberg in Switzerland where one station is located within a natural coniferous forest (BAB) with Norway spruce (_Picea abies_; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Beatenberg is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the
Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

wind-speed

display_name: wind-speed

education

en: Education and science

en: Beatenberg, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Ionut Iosifescu Enescu

en: hpc research-data-management reproducibility open-data jupyter-notebooks open-science open-source

en: Open Science Support @ WSL (Poster)

en:
This poster was originally created for the swissuniversities Open Science Action Plan: Kick-Off Forum, and showed to the audience on 17.10.2019. It illustrates how the environmental data portal EnviDat provides the tools for fostering Open Science and Reproducibility of scientific research at WSL.

Supporting open science is a highly relevant user requirement for EnviDat and for implementing FAIR (Findability, Accessibility, Interoperability and Reusability) principles at dataset level.
EnviDat encourages WSL scientists to complement data publication with a complete description of research methods and the inclusion of the open source software, code or scripts used for processing the dataset or for obtaining the published results. By openly publishing open software (e.g. as Jupyter notebooks) alongside research data sets, researchers can contribute to mitigate reproducibility issues.

EnviDat also promotes and supports, where possible and practical, the publication of software as Jupyter notebooks. Jupyter notebooks provide a solution for improved documentation and interactive execution of open code in a wide range of programming languages (Python, R, Octave/Matlab, Java or Scala). These programming languages are widely used in environmental research at WSL and well supported by the Jupyter-compatible kernels. We have sucessfully interfaced EnviDat-hosted notebooks with the WSL High-Performance Computing (HPC) Linux Cluster through a JupyterHub/JuypterLab beta installation on the HPC cluster implemented in close collaboration with the WSL IT-Services.
For existing software that cannot be easily migrated to Jupyter Notebooks, the Open Science and Reproducibility is assisted by containerisation. We have proven that several Singularity containers can successfully run on WSL's HPC cluster.

Finally, the researchers can upload the data/results complemented by code (e.g. as Jupyter Notebooks, or Singularity containers) and any additional documentation in EnviDat. Consequently, they will receive a DOI for the entire dataset, which they can reference in their science paper in order to publish a more reproducible research.

_License_: This poster is released by WSL and the EnviDat team to the public domain under a Creative Commons 4.0 CC0 "No Rights Reserved" international license. You can reuse this poster in any way you want, for any purposes and without restrictions.

hpc

display_name: hpc

jupyter-notebooks

display_name: jupyter-notebooks

open-data

display_name: open-data

open-science

display_name: open-science

open-source

display_name: open-source

reproducibility

display_name: reproducibility

research-data-management

display_name: research-data-management

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Open Science Support at the Swiss Federal Research Institute WSL. The EnviDat Concept


maintainer: Albrecht von Boetticher

en: debris-flow hangmuren barrier-impact-simulation finite-volumes dberisintermixing shallow-landslide murgang interfoam natural-hazard

en:
This version of debrisInterMixing is based on OpenFOAM Version 4.x and was tested on Ubuntu 18.04.1 LTS.
Please follow the instructions given in ReadMe_debrisInterMixing4.pdf for installation.

en: debrisInterMixing for OF-Version 6

en: These are the installation instructions for debrisInterMixing4

en: Installation Instructions for debrisInterMixing-6

en:
Here the updated versions of debrisInterMixing are provided for download. The first OpenFoam-compatible Version 2.3.x are available as supplement to v. Boetticher, A., Turowski, J. M., McArdell,W. B., Rickenmann, D., Hürlimann, M., Scheidl, C., and Kirchner, J. W.: DebrisInterMixing-2.3: A Finite Volume solver for three dimensional debris flow simulations based on two calibration parameters. Part two: model validation with experiments. Geoscientific Model Development, 10, 11: 3963-3978. doi: 10.5194/gmd-10-3963-2017.
DebrisInterMixing is a Volume-of-Fluid based Finite Volume code that accounts for shear-thinning sensitive shares of fine sediment suspension together with pressure-sensitive components of the gravel grains within debris flow mixtures. All model properties can be derived from a material sample except for a grid-sensitive calibration parameter.
For more information, please contact albrecht.vonboetticher@wasserbau.ch.

barrier-impact-simulation

display_name: barrier-impact-simulation

dberisintermixing

display_name: dberisintermixing

debris-flow

display_name: debris-flow

finite-volumes

display_name: finite-volumes

hangmuren

display_name: hangmuren

interfoam

display_name: interfoam

murgang

display_name: murgang

natural-hazard

display_name: natural-hazard

shallow-landslide

display_name: shallow-landslide

en: Three-dimensional debris flow simulation tool debrisInterMixing


maintainer: Lisa Hülsmann

en: tree-growth empirical-mortality-models forest-reserves inventory-data tree-mortality

en: Calibration data

en:
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.

 Meta data
Reserve: Name of the forest reserve

Plot: Permanent plot number

 Tree data
Species: Latin species name (or species group, cf. _Quercus_ spp.)

y: Status of the tree with 0 = alive and 1 = dead

dt: Length of the mortality period (years)

DBH: Diameter at breast height (mm) of the second inventory

relBAI: Annual relative basal area increment (-) calculated based on the first and the second DBH measurement as the compound annual growth rate of the trees basal area

 Stand data
_All stand variables were calculated for the second inventory._

mDBH: Mean diameter at breast height (mm)

iqrDBH: Interquartile range of diameter at breast height (mm)

BA: Basal area per hectare (m2 ha-1)

N: Number of trees per hectare (ha-1)

 Climate data
_Both climate variables were calculated for the period between the second and the third inventory._

P: Mean annual precipitation sum (mm)

mT: Mean annual air temperature (°C)

en:
The dataset comprises > 90 000 records from inventories in 54 strict forest reserves in [Switzerland](https://www.wsl.ch/de/wald/biodiversitaet-naturschutz-urwald/naturwaldreservate.html) and [Lower Saxony / Germany](http://naturwaelder.de/) along a considerable environmental gradient. It was used to develop parsimonious, species-specific mortality models for 18 European tree species based on tree size and growth as well as additional covariates on stand structure and climate.

 Inventory data
Measurements had been conducted repeatedly on up to 14 permanent plots per reserve for up to 60 years with re-measurement intervals of 4 - 27 years. The permanent plots vary in size between 0.03 and 3.47 ha. The inventories provide diameter measurements at breast height (DBH) and information on the species and status (alive or dead) of trees with DBH ≥ 4 cm for Switzerland and ≥ 7 cm for Germany.

 Data selection
We excluded three permanent plots where at least 80 % of the trees died during an interval of 10 years, and mortality could be clearly assigned to a disturbance agent. Mortality in the remaining stands was rather low, with a mean annual mortality rate of 1.5 % and strong variation between plots from 0 to 6.5 % (assessed for trees of all species with DBH ≥ 7 cm).
We only used data from permanent plots with at least 20 trees per species to obtain reliable plot-level mortality rates even for species with low mortality rates (about 5 % during 10 years), and selected tree species occurring on at least 10 plots to cover sufficient ecological gradients. This led to a dataset of 197 permanent plots and 18 tree or shrub species: _Abies alba_ Mill., _Acer campestre_ L., _Acer pseudoplatanus_ L., _Alnus incana_ Moench., _Betula pendula_ Roth, _Carpinus betulus_ L., _Cornus mas_ L., _Corylus avellana_ L., _Fagus sylvatica_ L., _Fraxinus excelsior_ L., _Picea abies_ (L.) Karst, _Pinus mugo_ Turra, _Pinus sylvestris_ L., _Quercus pubescens_ Willd., _Quercus_ spp. (_Q. petraea_ Liebl. and _Q. robur_ L.; not properly differentiated in the Swiss inventories), _Sorbus aria_ Crantz, _Tilia cordata_ Mill. and _Ulmus glabra_ Huds..

 Predictors of tree mortality
We considered tree size and growth as key indicators for mortality risk. Radial stem growth between the first and second inventory and DBH at the second inventory were used to predict tree status (alive or dead) at the third inventory. To this end, the annual relative basal area increment (relBAI) was calculated as the compound annual growth rate of the trees basal area. Additional covariates on stand structure and climate comprise mean annual precipitation sum (P), mean annual air temperature (mT), the mean and the interquartile range of DBH (mDBH, iqrDBH), basal area (BA) and the number of trees (N) per hectare.

 Further information
For further information, refer to Hülsmann _et al_. (in press) How to kill a tree – Empirical mortality models for eighteen species and their performance in a dynamic forest model. _Ecological Applications_.

empirical-mortality-models

display_name: empirical-mortality-models

forest-reserves

display_name: forest-reserves

inventory-data

display_name: inventory-data

tree-growth

display_name: tree-growth

tree-mortality

display_name: tree-mortality

en: Calibration data for empirical mortality models of 18 European tree species


maintainer: Avalanche Warning Service SLF

en: Avalanche fatalities per year in Switzerland since 1936/1937

media_type: CSV

en:
Attention: this data is not updated after 2022 anymore.
This dataset contains the statistics on the number of avalanche fatalities per hydrological year in Switzerland. The data set commences with the beginning of the hydrological year 1936/37 on 01/10/1936. After the completion of a hydrological year, the new data is appended to the existing dataset.
The following information is contained (by column and column title):
 - hydrological year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)
The definition for these four categories as described in the guidelines to the avalanche accident database:
**tour**:
activities include back-country ski, snowboard or snow-shoe touring
**offpiste**:
access from ski area, generally from the top of a skilift with short hiking distances
**transportation.corridors** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people travelling or recreating on open or temporarily closed
transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)
**buildings** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people inside or just outside buildings, and workers on high alpine building
sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

education

en: Education and science

en: Number of avalanche fatalities per hydrological year in Switzerland since 1936-1937


maintainer: Andrin Caviezel

en: sensor-stream stonenodedata rockfall rockfall-experiments induced-rockfall dem rockfall-runout deposition-points natural-hazards stonenode

en: StoneNode v1.0 Data for equipped experimental Runs.

en: Corresponding StoneNode v1.0 data streams belonging to the deposition points.

en: Induced Rockfall Data, Tschamut, GR

en:
 Induced Rockfall Experimental Data, Tschamut, GR, Switzerland

The archive contains site specific geographical data as well as the deposition points of manually induced rockfall by releasing differently shaped boulders with 30–80 kg of mass. Additionally availabe are the StoneNode v1.0 sensor streams for the equipped rocks.

The _OverviewFigures_ file serves as quick representation of the included data. It also contains the overview table for the rock masses in order to set the dimensions accordingly in RAMMS::ROCKFALL.

The archive contains the following folders:
<\ul>
* DEM: ArcGIS compatible DEM Tschamut_DEM_2m (grid resolution of 2 m) as well as the .asc grid used in RAMMS::ROCKFALL simulations
* _DepositionPoints_: containing two folders _RF Tschamut Frozen_ and _RF Tschamut WET_ containing each a shapefile with the complete deposition data of each series as well as deposition shapfiles for each rock shape.
* _DigitizedRocks_: Digitized point clouds of the used rocks as used for RAMMS::ROCKFALL simulations (.pts files) (dimensions have to be checked).
* _Orthofoto_: Orthophoto of the experimental site obtained via UAV with 5 cm resolution.

en:
 Dataset of an experimental campaign of induced rockfall in Tschamut, Grisons, Switzerland.

The data archive contains site specific geographical data such as DEM and orthophoto as well as the deposition points of manually induced rockfall by releasing differently shaped boulders with 30–80 kg of mass. Additionally available are all the StoneNode data streams for rocks equipped with a sensor. The data set consists of

* Deposition points from two series (wet (27/10/2016) and frozen (08/12/2016) ground)
* Digital Elevation Model (grid resolution 2 m) obtained via UAV
* Orthophoto (5 cm resolution) obtained via UAV
* Digitized rock point clouds (.pts input files for RAMMS::ROCKFALL)
* StoneNode v1.0 raw data stream for equipped rocks.

Further information is found in

* A. Caviezel et al., _Design and Evaluation of a Low-Power Sensor Device for Induced Rockfall Experiments_, IEEE Transactions on Instrumentation and Measurement, 2018, 67, 767-779, http://ieeexplore.ieee.org/document/8122020/
* P. Niklaus et al., _StoneNode: A low-power sensor device for induced rockfall experiments_, 2017 IEEE Sensors Applications Symposium (SAS), 2017, 1-6, http://ieeexplore.ieee.org/document/7894081/

dem

display_name: dem

deposition-points

display_name: deposition-points

induced-rockfall

display_name: induced-rockfall

natural-hazards

display_name: natural-hazards

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

rockfall-runout

display_name: rockfall-runout

sensor-stream

display_name: sensor-stream

stonenode

display_name: stonenode

stonenodedata

display_name: stonenodedata

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Induced Rockfall Dataset (Small Rock Experimental Campaign), Tschamut, Grisons, Switzerland


maintainer: Zhao

en: austin land-dynamics urban-land-use driving-factors planning

en: Potential driving factors of urban transformations of Austin over 25 years

en: In this study, the Austin metropolitan area, Texas, U.S., one of the fastest urban transformations and transformations regions, is selected to test the hypothesis that spatial planning and policies are important factors of urban transformations. Despite ample previous work in understanding the interactions between human and urban form transformation at specific areas, the actual interventions and outcomes of planning and policies (e.g., ‘smart growth’) on urban forms have been poorly measured. In this study, the potential influencing factors of urban transformations of Austin over 25 years were selected and collected.

austin

display_name: austin

driving-factors

display_name: driving-factors

land-dynamics

display_name: land-dynamics

planning

display_name: planning

urban-land-use

display_name: urban-land-use


en: seilaplan geoinformation-system raster-processing swiss-geodata geodata-processing digital-planning qgis-plugin digital-elevation-model open-source cable-yarding

en: DHM-Kacheln zusammenfügen

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. In this tutorial video, we show how to merge multiple DTM raster tiles into one file, using the QGIS tool ‘Virtual Raster’. This simplifies the digital planning of a cable line using the QGIS plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to Seilaplan website: https://seilaplan.wsl.ch

***************************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. In diesem Tutorialvideo zeigen wir, wie man mit dem QGIS-Plugin Virtuelles Raster mehrere DHM-Kacheln zu einem einzigen Rasterfile zusammenfügen und abspeichern kann. Für die Seillinienplanung mit Seilaplan muss nun nur noch eine Datei, mein neues virtuelles Raster, ausgewählt werden.

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geodata-processing

display_name: geodata-processing

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

raster-processing

display_name: raster-processing

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

en: Seilaplan Tutorial: Merge DTM tiles


sensitivity-of-modeled-snow-instability

maintainer: Bettina Richter

title_for_slug: sensitivity-of-modeled-snow-instability

en: global-sensitivity-analysis snow-cover-modeling numerical-avalanche-forecasting snowpack snow-instability

en: Case WL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the period of weak layer formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Case ALL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the whole simulation period. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Reference run

en: Reference run for the sensitivity analysis at Weissfluhjoch field site for winter season 2016-2017. Meteorological data from the automatic weather stations are used. No biases were introduced to the input data.

en: Manually observed snow profiles

en: Manually observed snow profiles at Weissfluhjoch field site for winter season 2016-2017, including layer depth, hand hardness, grain size and grain shape for each layer.

en: Case SL

en: Extracted output data for case SL. Here biases were introduced to meteorological input data during the period of slab formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: We investigated the sensitivity of modeled snow instability to meteorological input data using SNOWPACK. We therefore used input data from the automatic weather station at the Weissfluhjoch field site for the year 2016-2017. We investigated three scenarios and performed 14'000 simulations for each scenario. The dataset contains extracted output data from modeled SNOWPACK simulations, including setup files to reproduce the simulations. For further information read the README file.

global-sensitivity-analysis

display_name: global-sensitivity-analysis

numerical-avalanche-forecasting

display_name: numerical-avalanche-forecasting

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

snowpack

display_name: snowpack

education

en: Education and science

en: Sensitivity of modeled snow instability


maintainer: EnviDat Support

en: longwave-radiation incoming outgoing shortwave-radiation davos

en: Processing doc

en: DATA ACCESS

en: Parameter file

media_type: text/plain

format: TXT

mimetype: text/plain

en: Metadata

en:
Incoming and outgoing shortwave and longwave 2 min radiation measurements in Davos Dorf, CH.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

davos

display_name: davos

incoming

display_name: incoming

longwave-radiation

display_name: longwave-radiation

outgoing

display_name: outgoing

shortwave-radiation

display_name: shortwave-radiation

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: ASRB_DAV: Shortwave and longwave radiation measurements (2 min) in Davos Dorf


global-cryosphere-watch-data-survey

maintainer: Mathias Bavay

title_for_slug: global-cryosphere-watch-data-survey

en: automatic-publication data-usage data-portal gcw data-exchange

en: Third party data usage

en: Data interoperability survey

en: Two surveys on the topic of data usage where conducted for the Global Cryosphere Watch data portal. The first one focused on the data provider point of view while the second one focused on the data user point of view. 37 data providers (ie institutions) worldwide provided their answers for the first survey (from fall 2017 until summer 2018) while 54 users (contacted through various mailing list such as the Cryolist) answered the questions on their third party data usage (fall 2019 until January 2020).

automatic-publication

display_name: automatic-publication

data-exchange

display_name: data-exchange

data-portal

display_name: data-portal

data-usage

display_name: data-usage

gcw

display_name: gcw

en: Global Cryosphere Watch data survey


en: snow-ice-temperature weisfluhjoch snow-density snow-stratigraphy snow-water-equivalent

en: WFJ Snow Profiles 1999-2014

en:
Biweekly manual snow profiles from Weissfluhjoch, Davos, Switzerland.
Version: 2015-09-14T16:25

en: README

media_type: TXT

en: README file giving use metadata.

en: Dataset of manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland. Typical snow profile measurements and observations are included (temperature, density, grain size, grain type, hardness, wetness), following the guidelines of the The International Classification for Seasonal Snow on the Ground (ICSSG) [Fierz, C., Armstrong, R.L., Durand, Y., Etchevers, P., Greene, E., McClung, D.M., Nishimura, K., Satyawali, P.K. and Sokratov, S.A. 2009. The International Classification for Seasonal Snow on the Ground. IHP-VII Technical Documents in Hydrology N°83, IACS Contribution N°1, UNESCO-IHP, Paris].

snow-density

display_name: snow-density

snow-ice-temperature

display_name: snow-ice-temperature

snow-stratigraphy

display_name: snow-stratigraphy

snow-water-equivalent

display_name: snow-water-equivalent

weisfluhjoch

display_name: weisfluhjoch

en: Manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland


en: raclets aerosol backward-trajectories ice-nucleation clouds

en: This dataset contains number concentrations of ice-nucleating particles active at -15 °C observed at Weissfluhjoch during February and March 2019, as well as complementary data (measured aerosol number concentrations and modelled total precipitation along air mass trajectories). This data formed the basis of our paper with the title “Towards parameterising atmospheric concentrations of ice-nucleating particles active at moderate supercooling”.

aerosol

display_name: aerosol

backward-trajectories

display_name: backward-trajectories

clouds

display_name: clouds

ice-nucleation

display_name: ice-nucleation

raclets

display_name: raclets

education

en: Education and science

en: Ice nucleating particle concentrations active at -15 °C at Weissfluhjoch


maintainer: Henning Löwe

en: unconfined-compression-experiments spherical-model-snow microstructure 3d-ct-images discrete-element-modelling snow-mechanics

en: Data Structure (Python Notebook)

media_type: ipynb

en: Data Structure (Python Notebook - view online)

en: Data Access

media_type: HTTPS

en:
For the investigation of microstructural and mechanical properties of snow unconfined compression experiments and 3D computed tomography (CT) imaging were performed on sintered rounded grain snow and spherical model snow. The spherical model snow was generated to create geometrically simplified, well-defined microstructures for calibration of numerical models, such as discrete element models (DEM) in which the microstructure is represented by spherical particles.
In the experiments, microstructural variation was created by varying the sintering time (contact size) and the density of the ice sphere samples (number of contacts). The 3D CT images allow for a complete reconstruction of the entire experimental sample (cylindrical sample dimension: diameter = 33.6 mm; height = 14 mm).

discrete-element-modelling

display_name: discrete-element-modelling

microstructure

display_name: microstructure

snow-mechanics

display_name: snow-mechanics

spherical-model-snow

display_name: spherical-model-snow

unconfined-compression-experiments

display_name: unconfined-compression-experiments

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Unconfined compression experiments and 3D CT images of spherical model snow and RG snow samples


maintainer: Loïc Pellissier Pellissier

en: community-indices plant-herbivore-interactions environmental-gradients elevation functional-traits herbivores-communities alps

en: Nematode surveys

en: Surveys of soil nematode along elevation

en: Orthoptera surveys

en: Species inventories of Orthoptera

en: Vegetion surveys

en: Species inventories of plants

en: Plant traits

en: Plant functional traits (SLA, LDMC, carbon and nitrogen content, punch strenght; averaged by species)

en: Orthoptera traits

en: Orthoptera functional traits (incisive mandibular strength averaged by species)

en: Study sites

en: Coordinates and elevation of the study sites

en: Despite the common role of above- and below-ground herbivore communities in mediating ecosystem functioning, our understanding of the variation of species communities along natural gradient is largely strongly biased toward aboveground organisms. This dataset enables to study the variations in assemblages of two dominant groups of herbivores, namely, aboveground orthoptera and belowground nematodes together with their food plants. Herbivores and plant surveys were conducted in 48 natural grasslands along six elevation gradients, selected to span the major macro-climatic and environmental conditions of the Swiss Alps. It compiles herbivores and plant surveys, information on the study sites as well as plant and herbivores functional traits sought to be involved in trophic interactions and to respond to climatic variation along the elevation. Plant functional traits considered are the SLA, the LDMC, the C/N content, the punch strength (i.e. force required to pierce the leave lamina), the mandibular strength for Orthoptera insect. Data were collected during the summer 2016 and 2017.

alps

display_name: alps

community-indices

display_name: community-indices

elevation

display_name: elevation

environmental-gradients

display_name: environmental-gradients

functional-traits

display_name: functional-traits

herbivores-communities

display_name: herbivores-communities

plant-herbivore-interactions

display_name: plant-herbivore-interactions

en: Above- and below-ground herbivore communities along elevation


backward-trajectories

maintainer: Michael Sprenger

title_for_slug: backward-trajectories

en: lagrangian-analysis atmospheric-dynamics complex-topopgraphy raclets backward-trajectories alps cosmo

en: Backward Trajectories

en: The trajectories are started from surface up to 5000 m altitude, with an equidistant vertical spacing of 200 m, and calculated 120 h backward in time. As long as the trajectories stay in the COSMO1 domain (essentially the Alpine region), as run operationally at MeteoSwiss, the COSMO analysis wind fields are used. When the trajectories leave this domain, they are extended further backward in time based on ECMWF analysis data. The following fields are traced along the trajectories: longitude, latitude, geopotential height, pressure, specific humidity, temperature and surface topography. Furthermore, it is indicated for each trajectory time instance on which model data, COSMO or ECMWF, the trajectory time is based. Finally, the trajectories are started every hour in the specified time period, and positions and fields are available every 10 min. Each day is saved as a separate file. The last 8 digits of the file names indicate the starting date of the trajectories.

en: Backward trajectories were calculated from two positions: Davos Wolfgang (LON: 9.85361, LAT: 46.83551) and Weissfluhjoch (LON: 9.80646 LAT: 46.83304) for the time period February 2 until March 27 2019 using COSMO or ECMWF, respectively.

atmospheric-dynamics

display_name: atmospheric-dynamics

complex-topopgraphy

display_name: complex-topopgraphy

cosmo

display_name: cosmo

lagrangian-analysis

display_name: lagrangian-analysis

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Backward  Trajectories


rorcc

maintainer: Tobias Wechsler

title_for_slug: rorcc

en: hydropower design-discharge climate-change environmental-flow run-of-river-power-plants

en: RoRCC

media_type: XLS

en:
The dataset “RoRCC” consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
-	metadata on the RoR power plants under consideration
-	annual and seasonal production scenarios differentiated into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)
-	annual and seasonal production loss due to environmental flow requirements
-	annual and seasonal the technical increase potential (via design discharge optimisation)
-	annual and seasonal changes in the hydrological cycle for the three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)

en:
The dataset "RoRCC" consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
1) metadata on the RoR power plants under consideration, 2) annual and seasonal production potential scenarios under into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099), 3) annual and seasonal streamflow scenarios, 4) annual and seasonal production loss due to environmental flow requirements, 5) annual and seasonal the technical increase potential (via design discharge optimisation) and 6) annual and seasonal changes in the hydrological cycle.

climate-change

display_name: climate-change

design-discharge

display_name: design-discharge

environmental-flow

display_name: environmental-flow

hydropower

display_name: hydropower

run-of-river-power-plants

display_name: run-of-river-power-plants


vegetation-height-model-nfi

maintainer: Christian Ginzler

title_for_slug: vegetation-height-model-nfi

en: 3d vegetation-height-model forest point-cloud photogrammety

en: Countrywide Stereo-Image Matching for Updating Digital Surface Models in the Framework of the Swiss National Forest Inventory

en: Thumbnail

en: 2016 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2016' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2011 to 2016.

en: 2012 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2012' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2007 to 2012.

en: 2015 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2015' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2010 to 2015.

en: 2019 Vegetation Height Model NFI (current)

en:
Data 'Vegetation Height Model NFI 2019' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2013 to 2019.

en:
A national vegetation height model was calculated for Switzerland using digital aerial images.
We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution
(1 × 1 m and 0.5 x 0.5 m). The DSM was then normalized to obtain the actual
vegetation heights using a digital terrain model (DTM)
based on laser data with the buildings masked out, and to
produce a vegetation height model (VHM). Such a model
will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very
high level of detail. For covering the whole of Switzerland,
we use summer aerial images from six years.

Latest version is from 2019.

forest

display_name: forest

photogrammety

display_name: photogrammety

point-cloud

display_name: point-cloud

vegetation-height-model

display_name: vegetation-height-model

en: Vegetation Height Model NFI


en: energy-cooperatives cooperatives switzerland renewable-energy community-energy

en: Questionnaire with variable names

en: Modified questionnaire with variable names for each item. Should be used together with the data files (.csv or .sav) to reconstruct the data and variable structures.

en: Raw date (SPSS)

media_type: SAV

en: Raw data in sav. format (SPSS). For comprehension of the data and variable structure, please consult the modified questionnaire with variable names.

en: Codebook

en: Description of variable attributes and valid n

en: Raw data (.csv)

en: Raw data in csv. format. For comprehension of the data and variable structure, please consult the codebook and the modified questionnaire with variable names.

en:
 Topic of Survey
The data at hand on energy cooperatives in Switzerland were collected in 2016 as part of the project "Collective financing of renewable energy projects in Switzerland and Germany" of the National Research Programme 71 "Managing Energy Consumption". The cooperatives were surveyed on their organizational structure, their activities in electricity and heat generation, their finances, the political context and their assessments of the future.

 Survey Method
The survey was targeted at all energy cooperatives in Switzerland (this is the basic population). The Swiss Commercial Register was searched for cooperatives and specific keywords in order to determine this basic population and collect addresses. This search in May 2016 resulted in a total of 304 energy cooperatives, to which a questionnaire was sent in July 2016. A pre-test with 8 persons had been carried out before the questionnaire was sent out. The questionnaire was provided in German and French. It was sent by mail and an attached letter referred to a link for the digital version if preferred. The online version was designed with the software "Sawtooth". After three weeks, a first, and after six weeks a second reminder letter was sent to those cooperatives that had not yet completed the questionnaire. The returned hardcopy questionnaires were manually entered into the database and then combined with the electronic data from the online survey. In the course of the survey, the total population was reduced from 304 to 289: in 4 cases the survey was not deliverable, 4 cooperatives had dissolved, 6 were not actually energy cooperatives, 1 case had recently changed its legal form. With a response rate of 47%, the final data set comprises 136 responses (from 77 digital and 59 hardcopy questionnaires). However, not all 136 of the returned questionnaires were filled out completely. We checked for answers that seemed contradictory or incomprehensible. If an error could be clearly identified and the correct answer derived, the answer was adjusted, otherwise the answer was replaced by "missing data".

 Anonymization
Participating cooperatives have been assured that their information will be kept confidential and will only be made public anonymously. For this reason, the data have been anonymized in in order to prevent any identification of individual cooperatives.

 How to Use the Data
* The data are available in CSV and SPSS (sav.) format.
* A codebook and a modified version of the used questionnaire are provided to illustrate the data and variable structure. In the questionnaire, the variable names are assigned to the corresponding questions. In the codebook, further information on these variables (valid n, answer categories) can be found. This information (of the codebook) is already integrated in the SPSS file.

 Current Embargo on Data
These data are currently under embargo and will only be released when the project is completed (not before 2020).

#Additional Information
* The used questionnaire is provided in German and French.
* Descriptive results of the survey were published in a WSL report: https://www.dora.lib4ri.ch/wsl/islandora/object/wsl:18943

community-energy

display_name: community-energy

cooperatives

display_name: cooperatives

energy-cooperatives

display_name: energy-cooperatives

renewable-energy

display_name: renewable-energy

switzerland

display_name: switzerland

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Energy Cooperatives in Switzerland: Survey Results // Energiegenossenschaften in der Schweiz: Befragungsergebnisse


maintainer: Matthias Haeni

en: meteo swiss-forest-lab long-term meteorology par relative-humidity wind-speed climate-change precipitation temperature

en: Site photo of the field station (VSF)

en: Site photo of the field station from the side.

en: Site photo of the forest station (VSB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Data plot of the forest station (VSB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Visp)

en: Site aerial photo from both Visp stations. Source: Google. 2016. Site aerial photo from both Visp stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the field station (VSF)

en: Forest station data (VSB)

en: Data file.

en: Field station data (VSF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Visp in Switzerland where one station is located within a natural mixed forest stand (VSB) with Scots pine (_Pinus sylvestris_; 40-80 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, VSF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Visp is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Visp, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: land-use remote-sensing mowing management landsat grassland sentinel-2 use-intensity

en: Grassland-use intensity map 2021

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2021. See readme file for more details.

en: Preview time of 1st grassland management event 2020

media_type: PNG

en: Spatial distribution of the timing (day of year; DOY) of the first management event for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the timing of the first event of the year (Weber et al., 2023; IN REVIEW)

format: PNG

en: Grassland-use intensity map 2018

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2018. See readme file for more details.

en: Grassland-use intensity map 2019

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2019. See readme file for more details.

en: Readme

en: Metadata and description of the individual raster layers

en: Preview number of grassland management events 2020

en: Spatial distribution of the number of management events for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the distribution of management frequency (Weber et al., 2023; IN REVIEW)

en: Grassland-use intensity map 2020

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2020. See readme file for more details.

en:
A rule-based algorithm [(Schwieder et al., 2022)](https://doi.org/10.1016/j.rse.2021.112795) was used to produce annual maps for 2018–2021 of grassland-management events, i.e. mowing and/or grazing, for Switzerland using Sentinel-2 and Landsat 8 satellite time series. All satellite images were processed with the [FORCE](https://force-eo.readthedocs.io) framework.

The resulting maps provide information on the number and timing of grassland-management events at a spatial resolution of 10 m × 10 m for the whole of Switzerland. For the final maps, permanent grasslands were masked using a variety of land-use layers, according to [Huber et al. (2022)](https://doi.org/10.1002/rse2.298) but replacing the crop mask with the agricultural-use data from the cantons.

We assessed the detection of management events based on independent reference data, which we acquired from daily time series of publicly available webcams that are widely distributed across Switzerland. We further tested the ecological relevance of the generated intensity measures in relation to nationwide biodiversity data (see Weber et al., 2023; IN REVIEW).

grassland

display_name: grassland

land-use

display_name: land-use

landsat

display_name: landsat

management

display_name: management

mowing

display_name: mowing

remote-sensing

display_name: remote-sensing

use-intensity

display_name: use-intensity

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Grassland-use intensity maps for Switzerland


en: snow antarctica ice arctic sea-salt-aerosol

en: Table 2

en: This table lists all NEXAFS data files in chronological order with PE carbon to oxygen signal intensity ratios -from which the atomic ratio were calculated in the paper - before ("preCtoO") and after ("postCtoO") each NEXAFS measurement. Also listed is the change in Na ("lossSodi"), O ("lossOxy"), Cl ("lossChlor"), and C ("lossCarb") signal intensity after the NEXAFS measurement compared to prior to the NEXAFS measurement.

en: Fig 1F

en: Data to Figure 1F

en: Fig 1A

en: Data Figure 1A

en: Fig 1B

en: Data in Figure 1B

en: Fig 1F_1

en: Individual data to mean shown in Figure 1F

en: Fig 1C

en: Data to Figure 1C

en: Fig 1B_2

en: Individual data to mean shown in Figure 1B

en: Fig 1D

en: Data to Figure 1D

en: Fig 1F_2

en: Read Me

en: Description of the data tables

en: Fig 1B_1

en: This table lists all data files in chronological order. "SampleTemp" refers to the reading of the PT-1000 at the side of the sample holder. "cellPressure" is the water vapour pressure during the measurements. From this, in presence of ice, the temperature of the ice sample can be calculated which is given in the column "iceTemp". "dT" is the difference, or temperature offset, between sensor's reading and the ice samples temperature. The offset is due to the sensor being mounted away from the cooled spot of the sample were it experiences heating from warmer parts of the sample holder. The off-set is used to calibrate the temperature sensor and the resulting temperature during the experiments is given in the column "temperature". "relHum" is the relative humidity above (supercooled) liquid and "concBrine" is the concentration of a NaCl solution in mol/l in equilibrium with ice at the experimental temperature. "Area" is the integrated PE signal.

en: Code

media_type: m

en: Matlab code to read and plot the data

en: Fig 1E

en: Laboratory experiments are presented on the phase change at the surface of sodium chloride – water mixtures at temperatures between 259 K and 240 K. High selectivity to the upper few nanometres of the frozen solution – air interface is achieved by using electron yield near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. We present the NEXAFS spectrum of the hydrohalite.

en: Data set on interfacial supercooling and the precipitation of hydrohalite in frozen NaCl solutions by X-ray absorption spectroscopy


maintainer: Jürg Schweizer

en: danger-level avalanche-activity avalanche-size snow-avalanche avalanche-forcasting

en: Avalanche activity data

en: This data file includes data on the avalanche activity per day aggregated from the avalanche data.

en: Readme

en: The Readme file contains the description of the two data files.

en: Snow avalanche data

en: This data file includes data on the avalanches mapped in the region of Davos.

en:
These data include all avalanches that were mapped in the region of Davos, Switzerland during the winters 1998-1999 to 2018-2019 (21 years), in total 13,918 avalanches, and the corresponding forecast danger level valid on the day of avalanche occurrence, 3533 days and danger ratings in total.

This avalanche activity data set was analysed and results published by Schweizer et al. (2020). They found that the
number of avalanches per day strongly increased with increasing danger level, but avalanche size was poorly related to avalanche danger level.

The data are provided in two files: the first includes the avalanche data (13,918 records); the second includes the avalanche activity per day (3533 records).
Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Schweizer, J., Mitterer, C., Techel, F., Stoffel, A. and Reuter, B., 2020. On the relation between avalanche occurrence and avalanche danger level. The Cryosphere, 14, 737-750, https://doi.org/10.5194/tc-14-737-2020.

avalanche-activity

display_name: avalanche-activity

avalanche-forcasting

display_name: avalanche-forcasting

avalanche-size

display_name: avalanche-size

danger-level

display_name: danger-level

snow-avalanche

display_name: snow-avalanche

education

en: Education and science

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow avalanche data Davos, Switzerland, 1999-2019


en: torymus-sinensis biological-control castanea-sativa southern-switzerland population-evolution dryocosmus-kuriphilus pest-invasion

en:
Data has been collected from summer 2011 to 2016.

Main reasons for NA values:

-	D. kuriphilus still not arrived in the site.
-	No galls were found during the field sampling.
-	Site has not been sampled in the correspondent year because of time, weather or money constrains.
-    T. sinensis not found in the galls

Variable description:

Year = sampling year.

Coordinate, elevation, slope, aspect = average site characteristics.

ts_arrival = T. sinensis arrival year.

dk_arrival = D. kuriphilus arrival year.

dk_parasitism_by_ts = D. kuriphilus parasitism rate by T. sinensis. Formula: (no. of T. sinensis/ no. of D. kuriphilus chambers) * 100 at gall level.

dk_infestation = Percentage of attacked buds. Formula: no. of attacked buds / no. of total developed buds*100 (as presented in Kotobuki et al. 1985) at shoot level.

ts_per_bud = number of alive T. sinensis individual calculated at bud level.

dk_per_bud = number of alive D. kuriphilus individual calculated at bud level.

dk_pot_per_bud = overall number (dead and alive) D. kuriphilus individual calculated at bud level.

total_gall_nr_per_bud = average gall number per bud.

chamber_per_galls = average D. kuriphilus chamber number per gall.

For details see the submitted publication with the same name

References
Kotobuki, K., Mori, K. and Sato, Y. (1985) ‘2 methods to estimate the tree damage by chestnut gall wasp Dryocosmus-kuriphilus’, Bulletin of the fruit tree research station A (Yatabe), 2(12), pp. 29–36.

en:
This dataset contains the population evolution of a pest and its biocontrol agent in terms of presence proportion at gall level and absolute number of insects.

The study area extends from the Cuneo region (Piedmont, Italy) to southern Switzerland. In order to provide a complete range of data covering the entire process from the pest arrival to complete biological control by its natural enemy T. sinensis, a space-for-time substitution approach has been adopted so as to create a temporal gradient of the epidemic stages over the whole study area.

The southernmost Swiss sites roughly represent the arrival and establishment of the pest without the presence of the natural enemy, the central ones the early epidemic stage and the epidemic peak, whereas the northern ones the end of the epidemic with the beginning of the biocontrol. The Italian ones represent the beginning of the equilibrium between the two population as well as the situation with stable T. sinensis populations on the long term.

These data are used in the paper entitled: Torymus sinensis local and regional early population dynamics in the Insubrian and Piedmont regions

biological-control

display_name: biological-control

castanea-sativa

display_name: castanea-sativa

dryocosmus-kuriphilus

display_name: dryocosmus-kuriphilus

pest-invasion

display_name: pest-invasion

population-evolution

display_name: population-evolution

southern-switzerland

display_name: southern-switzerland

torymus-sinensis

display_name: torymus-sinensis


maintainer: Robert Pazúr

en: remote-sensing cropland switzerland habitat sentinel-2 grassland agriculture vegetation-indices machine-learning phenology

en: (current version) Cropland and grassland map of Switzerland (v.1.5)

media_type: geotiff

en: Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.6  (v1.0)

media_type: TIFF

en:
!!! Please check out the newer version in the repository !!!
Mask of unsealed surfaces of Switzerland based on 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.6

format: TIFF

en: (current version) Cropland, grassland, and shrubland map of Switzerland (v.1.5)

en: GEE (Google Earth Engine) script (JavaScript) to derived the output map  (v1.0)

media_type: JS

en: !!! Please check out the newer version in the repository !!! The code used in Google Earth Engine to derive the cropland, grassland and shrubland map of Switzerland

en: Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.7 (v1.0)

en: !!! Please check out the newer version in this repository !!! Assuming that sealed surfaces have little or no phenological response we calculated a mask of unsealed surfaces based on the 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.7.

en: (current version) Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.7 (v1.5)

en: Cropland and grassland map of Switzerland  (v.1.0)

en: !!! Please check out the newer version in this repository !!! (1) cropland; (2) grassland; other LC classes are masked out from the map

en: Cropland, grassland, and shrubland map of Switzerland (v1.0)

en: !!! Please check out the newer version in this repository !!! (1) cropland; (2) grassland; (3) shrubland; other LC classes are masked out from the map

en: GEE (Google Earth Engine) script (JavaScript) to derived the output map  (v1.5)

en: The code used in Google Earth Engine to derive the cropland, grassland and shrubland map of Switzerland. Compare to the previous version the newer version includes the shadow masking procedure which might be important in the mountainous areas.

en: (current version) Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.6 (v1.5)

en: Assuming that sealed surfaces have little or no phenological response we calculated a mask of unsealed surfaces based on the 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.6.

en: We developed a map of cropland and grassland allocation for Switzerland based on several indices dominantly derived from Sentinel-2 satellite imagery captured over multiple growing seasons. The classification model was trained based on parcel-based data derived from landholder reporting. The mapping was conducted on Google Earth Engine platform using random forest classifier. Areas of high vegetation, shrubland, sealed surface and non-vegetated areas were masked out from the country-wide map. The resulting map has high accuracy in lowlands as well as mountainous areas.

agriculture

display_name: agriculture

cropland

display_name: cropland

grassland

display_name: grassland

habitat

display_name: habitat

machine-learning

display_name: machine-learning

phenology

display_name: phenology

switzerland

display_name: switzerland

vegetation-indices

display_name: vegetation-indices

en: Cropland and grassland map of Switzerland based on Sentinel-2 data


en: longwave-radiation snow-height gemstock meteo-station shortwave-radiation

en: DATA ACCESS

en:
Meteo data at Gemsstock [Level 2 dataset](http://models.slf.ch/p/dataset-processing/).

fields      = timestamp TSS HS VW DW VW_MAX OSWR ISWR ILWR RECORD AUX_VOLTAGE LOGGER_VOLTAGE LW_SENSOR_TEMP VENTILATION_FLAG OLWR

en: Meteorological station at Gemstock (3021 m asl) in Canton Uri. The station includes in/out LW/SW and a snow height sensor.

gemstock

display_name: gemstock

longwave-radiation

display_name: longwave-radiation

meteo-station

display_name: meteo-station

shortwave-radiation

display_name: shortwave-radiation

snow-height

display_name: snow-height

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: GEM2: Meteorological and snow station at Gemsstock (3021 m asl), Canton Uri, Switzerland


maintainer: Frank Techel

en: avalanche-fatalities avalanche-accident-statistics avalanche-statistics avalanche-accident long-term-trends

en: Data avalanche fatalities 1969/1970 - 2014/2015

en: The data comprises avalanche fatality data from the Alpine regions in the seven countries Austria, France, Germany, Italy, Liechtenstein, Slovenia, and Switzerland.

en:
During the last 45 years, about 100 people lost their lives in avalanches in the European Alps each year. Avalanche fatalities in settlements and on transportation corridors have considerably decreased since the 1970s. In contrast, the number of avalanche fatalities during recreational activities away from avalanche-secured terrain doubled between the 1960s and 1980s and has remained relatively stable since, despite a continuing strong increase in winter backcountry recreational activities.

Data complementing Figure 2 in:
_"Avalanche fatalities in the European Alps: long-term trends and statistics"_, by Techel, F., Jarry, F., Kronthaler, G., Mitterer, S., Nairz, P., Pavšek, M., Valt, M., and Darms, G.

Data description:
please refer to section 2 (Data and Methods) in the mentioned publication

avalanche-accident

display_name: avalanche-accident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

avalanche-statistics

display_name: avalanche-statistics

long-term-trends

display_name: long-term-trends

en: Avalanche fatalities in the European Alps (1969/1970 - 2014/2015)