maintainer: Matthias Haeni

en: wind-speed long-term temperature par climate-change meteo precipitation relative-humidity meteorology swiss-forest-lab

en: Site photo of the forest station (ISB)

media_type: image/jpeg

en: Site photo of the forest station from below (viewing upwards the slope).

mimetype: image/jpeg

en: Data plot of the field station (ISF)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site photo of the field station (ISF)

en: Site photo of the field station from the side.

en: Data plot of the forest station (ISB)

en: Field station data (ISF)

en: Data file.

en: Site aerial photo (Isone)

en: Site aerial photo from both Isone stations. Source: Google. 2016. Site aerial photo from both Isone stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Forest station data (ISB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Isone in Switzerland where one station is located within a natural broad-leaved forest stand (ISB) with European beech (_Fagus sylvatica_; 70-100 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, ISF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Isone is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Isone, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Thorsten Bartels-Rausch

en: chemistry arctic ozone snow alpine brine heterogeneous solution reaction interface laboratory-study metamorphism antarctica

state: active

type: dataset

en: Ozone data

media_type: dat

en: Trend of ozone mixing ratio ( _O3mixingRatio_ppb_ with time ( _time_s_ ) as measured downstream of the snow sample during the experiments. Time "0" denotes the time when data acquisition with ozone analyser was started. And, ozone (_nOzone_molec_per_s_ ) loss for each experiment with duration of ozone exposure ( _duration_s_ ) of ozone exposure, as derived from the ozone trends shown above. Time "0" denotes the time when the carrier gas with ozone was passed via the snow sample.

format: SERVICE

en: Matlab Script to view and plot data

media_type: .m

en: Matlab Data

media_type: mat

en: All data as Matlab mat file

en: Data Figure 1

en: Data of published Figure

en: Acetone data

en:
intensity of the acetone-water-cluster and water-cluster (as derived by a chemical ionisation mass spectrometer) with time in the carrier gas downstream of packed bed flow tube holding the snow sample or the by-pass, respectively. Time "0" denotes the time when the mass spectrometer data acquisition was started. When the carrier
gas with acetone was passed via the packed bed flow tube, that is switched from by-pass to pass the snow, acetone concentration in the carrier gas rapidly dropped due to surface adsorption and slowly recovered as the adsorption sites saturate. From this, the surface area can be obtained.

en: Readme file

en: This file shows data, code, and plots.

format: PDF

mimetype: application/pdf

en: data list

en: Lists file names, snow sample properties, and flow settings for each data-set.

en: Earth’s snow cover is very dynamic on diurnal time scales. The changes to the snow structure during this metamorphism have wide ranging impacts such as on avalanche formation and on the capacity of surface snow to exchange trace gases with the atmosphere. Here, we investigate the influence of dry metamorphism, which involves fluxes of water vapor, on the chemical reactivity of bromide in the snow. For this, the heterogeneous reactive loss of ozone at a concentration of 5-6E12 molecules cm-3 is investigated in artificial, shock-frozen snow samples doped with 6.2 uM sodium bromide and with varying metamorphism history. The oxidation of bromide in snow is one reaction initiating polar bromine releases and ozone depletions.

alpine

display_name: alpine

antarctica

display_name: antarctica

arctic

display_name: arctic

brine

display_name: brine

chemistry

display_name: chemistry

heterogeneous

display_name: heterogeneous

interface

display_name: interface

laboratory-study

display_name: laboratory-study

metamorphism

display_name: metamorphism

ozone

display_name: ozone

reaction

display_name: reaction

snow

display_name: snow

solution

display_name: solution

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Data set on bromide oxidation by ozone in snow during metamorphism from laboratory study


en: stillberg treeline-ecosystems literature-review mountain-ecology long-term-experiment

media_type: .zip

en: The Stillberg bibliography (Stillberg_bibliography_v1.zip) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals (Stillberg_bibliography_data_v1.csv) along with the metadata file (Stillberg_bibliography_metadata_v1.csv). Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title.

en:
 Background information

The Stillberg ecological treeline research site in the Swiss Alps was established in 1975, with the aim to develop ecologically, technically, and economically sustainable reforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Over almost fifty years, research at the Stillberg site combined long-term monitoring of the large-scale high-elevation afforestation with experimental manipulations simulating global change impacts. Besides providing a scientific basis and practical guidelines for high-elevation afforestation, this research has contributed to a comprehensive understanding of ecological processes in the treeline ecotone across different compartments and scales, from individual trees, non-tree vegetation and soils to whole ecosystems, in the context of global change resulting in more than 150 publications.

 Dataset generation

We compiled a comprehensive list of scientific publications covering research at the Stillberg research site by conducting searches in the literature databases Web of Science and Google Scholar, as well as in the Digital Object Repository of the Swiss Federal Institute for Forest, Snow and Landscape Research WSL (DORA). We compiled all publications about the afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, the G-TREE experiment, as well as other studies related to the Stillberg research site.

 Data description

The Stillberg bibliography (Stillberg_bibliography_data_v1.csv) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals. Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title. The bibliography is described in a metadata file (Stillberg_bibliography_metadata_v1.csv). The bibliography along with the metadata file are provided in a ZIP-folder (Stillberg_bibliography_v1.zip).

literature-review

display_name: literature-review

long-term-experiment

display_name: long-term-experiment

mountain-ecology

display_name: mountain-ecology

stillberg

display_name: stillberg

treeline-ecosystems

display_name: treeline-ecosystems

en: Bibliography of the long-term treeline research site Stillberg, Switzerland


en: meteo swiss-forest-lab relative-humidity meteorology par climate-change temperature wind-speed precipitation long-term

en: Data plot of the field station (OTF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site photo of the field station (OTF)

en: Site photo of the field station from below (viewing upwards the slope).

en: Forest station data (OTB)

media_type: text/csv

en: Data file.

format: CSV

mimetype: text/csv

en: Site aerial photo (Othmarsingen)

en: Site aerial photo from both Othmarsingen stations. Source: Google. 2016. Site aerial photo from both Othmarsingen stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Field station data (OTF)

en: Data plot of the forest station (OTB)

en: Site photo of the forest station (OTB)

en: Site photo of the forest station from above (viewing downwards the slope).

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Othmarsingen in Switzerland where one station is located within a natural deciduous forest stand (OTB) with European beech (_Fagus sylvatica_; 120-140 yrs) and lime trees (_Tilia sp._; 120-140 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, OTF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Othmarsingen is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Othmarsingen, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: dischma-catchment meteo-station meteorological-measurements davos soil-moisture

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: IRKIS Soil moisture measurements Davos


maintainer: EnviDat Support

en: number-of-caught-persons avalanche-fatalities avalanche-accidents avalanche-accident-statistics number-of-dead-persons

en: Fatal avalanche accidents in Switzerland since 1995-1996

media_type: CSV

en:
Attention: this data is not updated after 2022 anymore.
This data collection contains information concerning all accidents by snow avalanches causing at least one fatality in Switzerland. The data set commences on 01/10/1995. After the completion of a hydrological year, the new data is added.
The following information is provided:
 * avalanche identifier
 * date of the accident
 * accuracy of the date in range of days before and after
 * canton
 * name of the locality
 * start zone of the avalanche
  * coordinates (Swiss coordinate system, approximately in middle of start zone)
  * accuracy of the coordinates in meters
 * elevation (in meteres above sea level, app. in middle of start zone)
 * slope aspect (main orientation of start zone)
 * slope inclination (in degree, steepest point within start zone)
 * number of dead persons
 * number of caught persons
 * number of fully buried persons
 * forecasted avalanche danger level
 * activity/location of the accident party at the time of the incident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

number-of-caught-persons

display_name: number-of-caught-persons

number-of-dead-persons

display_name: number-of-dead-persons


en: perception-of-ecosystem-services adults-and-teenagers visual-attractiveness nfi-photos online-questionnaire-survey

en: Codebook to SPSS-file

en: Dataset in csv-format

en: SPSS-Dataset

en: Questionnaire Italian

media_type: .pdf

en: Questionnaire French

en: Questionnaire German

media_type: PDF

en: This questionnaire survey was conducted as an online survey and aimed at investigating the relationship between physical forest characteristics, visual attractiveness of forest and the perception of ecological and cultural ecosystem services in urban forests. Each participant was shown 6 photos out of a pool of 50 photos taken from the Swiss National Forest Inventory (NFI) database. Physical forest characteristics were derived from the photos. The study was conducted as part of the "WaMos meets LFI" (WML) project.

adults-and-teenagers

display_name: adults-and-teenagers

nfi-photos

display_name: nfi-photos

online-questionnaire-survey

display_name: online-questionnaire-survey

perception-of-ecosystem-services

display_name: perception-of-ecosystem-services

visual-attractiveness

display_name: visual-attractiveness

en: Relationship between physical forest characteristics, visual attractiveness and perception of ecosystem services in urban forests


maintainer: Lisa Hülsmann

en: primeval-forests forest-inventory tree-mortality mortality-models fagus-sylvatica forest-reserves

en: Swiss data full

en:
READ ME for

Hülsmann L, Bugmann H, Commarmot B, Meyer P, Zimmermann S, Brang P
Data from: Does one model fit all? Patterns of beech mortality in natural forests of three European regions.
Ecological Applications http://dx.doi.org/10.5061/dryad.h4s6t

Forest inventory data of beech for the development of individual-tree mortality models from strict forests reserves in Switzerland, Germany and Ukraine.

The data package provides the files
CH_reduced: inventory data of the reduced dataset from Switzerland that was used to assess the influence of additional environmental and stand characteristics on beech mortality
CH: inventory data from strict forest reserves in Switzerland
DE: inventory data from strict forest reserves in Germany
UA: inventory data from a primeval beech forest in Ukraine

A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.
Diameter at breast height: dbh (mm)
Annual relative basal area increment: relBAI (), calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area (Bigler and Bugmann 2004)
Status of the tree: y, 0 = alive, 1 = dead
Length of the mortality period: dt (years)

Additional environmental and stand characteristics were derived for the reduced Swiss dataset.
Note the varying seasonal level of the covariates considering the entire year, the growing season from April to September (G) and the winter month January to March (W).
All climatic covariates were calculated for both the ‘growth’ (2) and the ‘mortality’ period (3). The stand covariates were derived for the second inventory of each record (2).

Mean diameter at breast height: dbh.mean.2 (mm)
Interquartile range of diameter at breast height: dbh.IQR.2 (mm)
Median diameter at breast height: dbh.median.2 (mm)
Basal area per hectare: BA.2 (m2 ha-1)
Number of trees per hectare: N.2 (ha-1)
pH-value: pH ()
Available water capacity in the soil: AWC (mm)
Mean annual precipitation sum: P.2, P.3 (mm)
Mean precipitation sum during growing season: PG.2, PG.3 (mm)
Mean annual air temperature: mT.2, mT.3 (°C)
Mean air temperature during growing season: mTG.2, mTG.3 (°C)
Mean air temperature during winter months: mTW.2, mTW.3 (°C)
Mean growing degree-days: GDD.2, GDD.3 ()
Mean number of months during growing season with water deficit: mDEFdurG.2, mDEFdurG.3 ()
Mean annual maximum water deficit: mDEFmax.2, mDEFmax.3 (mm)
Overall maximum of the annual maximum water deficit: maxDEFmax.2, maxDEFmax.3 (mm)
Mean of cumulative water deficit during growing season: mDEFcumG.2, mDEFcumG.3 (mm)
Overall maximum of cumulative water deficitduring growing season: maxDEFcumG.2, maxDEFcumG.3 (mm)
Percentage of years with at least one month water deficit: percDEF.2, percDEF.3 (%)

en: German data

en: Swiss data reduced

en: Ukrainian data

en:
The datasets comprise nearly 19’000 trees of European beech (_Fagus sylvatica_ L.) from unmanaged forests in Switzerland, Germany / Lower Saxony and Ukraine. Tree death was modelled as a function of size and growth, i.e., stem diameter (DBH) and relative basal area increment (relBAI). To explain the spatial and temporal variability in mortality patterns, we considered a large set of environmental and stand characteristics.

 Inventory data
The strict forest reserves in Switzerland and Germany had been established in the period of 1961-1975 and 1971-1974, respectively. Every reserve included up to 10 permanent plots ranging from 0.09 to 1.8 ha in size, with slightly irregular re-measurement intervals. Permanent plots with pure or mixed beech stands were selected from the reserves of both networks. Reserves with considerable wind disturbance during the monitored intervals were excluded from the analysis. In addition to data from the Swiss and German reserves, data from a 10 ha plot in the primeval beech forest Uholka in Western Ukraine including three remeasurements were used. The inventory data provide diameter measurements at breast height (dbh) for revisited trees with a diameter of more than 4, 7 and 6 cm for Switzerland, Germany and Ukraine, respectively.

 Mortality predictors
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory. As an explanatory variable, the annual relative basal area increment (relBAI) was calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area. Tree dbh in the second inventory was used in addition to relBAI to model tree status (alive or dead) of the third inventory.

To increase the generality of the mortality models, we selected environmental variables that are known to have a considerable influence on growth and mortality of beech. We emphasized the effects of water availability using a large set of drought characteristics that were calculated based on the local site water balance. We also related beech mortality to soil pH, temperature, precipitation and growing degree-days. Additionally, we considered stand characteristics that reflect the development stage, competition and structure of the forests.

 Further information
For further information, refer to Hülsmann _et al_. (2016) Does one model fit all? patterns of beech mortality in natural forests of three European regions. _Ecological Applications_.

fagus-sylvatica

display_name: fagus-sylvatica

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves

mortality-models

display_name: mortality-models

primeval-forests

display_name: primeval-forests

tree-mortality

display_name: tree-mortality

en: Data from: Does one model fit all? patterns of beech mortality in natural forests of three European regions


high-resolution-climate-data-for-europe

title_for_slug: high-resolution-climate-data-for-europe

en: cordex precipitation daily-climate minimum-temperature europe eur11 maximum-temperature air-temperature

en: Data Access

media_type: NetCDF

en: CHELSA EUR11 Technical Documentation

en: As the CHELSA project is continuously expanded, certain new parameters, time scales etc. are not included anymore in the original publication (Karger et al. 2017). We are therefore provide this document as a guideline of the current climatic parameters available and will expand it as new parameters or time periods will become available. Please refer to the version history for changes made in the document.

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present downscaled climate data for the CORDEX EUR11 domain at a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperature lapse rates. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height. The resulting data consist of a daily temperature and precipitation timeseries.

The data is distributed under a: Creative Commons: Attribution 4.0 International (CC BY 4.0) license.

air-temperature

display_name: air-temperature

cordex

display_name: cordex

daily-climate

display_name: daily-climate

europe

display_name: europe

maximum-temperature

display_name: maximum-temperature

minimum-temperature

display_name: minimum-temperature

precipitation

display_name: precipitation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: High resolution climate data for Europe


en: avalanche-mapping remote-sensing avalanche reliability avalanche-size-estimation

en: AvalancheReliabilityData

media_type: application/x-zip-compressed

en: The .zip contains all data used to conduct the reliability study as well as the results, a detailed description of the included files is contained in the included pdf. All geospatial data is provided in the Swiss Coordinate System: CH1903+ / LV95 (EPSG 2056). For any use of the data the proper citation provided is obligatory!

mimetype: application/x-zip-compressed

en:
This dataset contains the data used and collected to investigate the reliability of avalanche size estimates and avalanche outlines (see related publications). Namely this is

 Avalanche size estimates

* the 10 pictures depicting avalanches
* the survey results from the 170 participants

 Avalanche outlines mapped from oblique photographs
* the pictures of the six avalanches
* the avalanche outlines mapped by the 10 participants
* the reference mapped from the georeferenced photographs

 Avalanche outlines from remotely-sensed imagery
* the orthophotos in the four different resolutions (2m, 1m, 50cm, 25cm)
* the area of interest (AoI) delimiting the research area
* the avalanche mappings in each resolution for all five participants
* the shade masks used to separate illuminated and shaded areas

The acquisition of the orthophotos has been partially supported by the Swiss National Science Foundation (SNF; Grant N°200021_172800).

avalanche

display_name: avalanche

avalanche-mapping

display_name: avalanche-mapping

avalanche-size-estimation

display_name: avalanche-size-estimation

reliability

display_name: reliability

remote-sensing

display_name: remote-sensing

en: Data reliability study: avalanche size estimates and outlines


maintainer: Yohann Chauvier

en: random-stratified-sampling survey-effort point-process-model target-group independent-dataset environmental-stratification cluster background-data covariate-correction plant-species

media_type: ZIP

en: Non-copyright data, scripts, diversity outputs

format: ZIP

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models


en: gcos snow-water-equivalent wagital snow meteodat-gmbh

media_type: TXT

format: TXT

en:
Total water reserves of the snow cover [mio m3] for Wägital catchment, Switzerland, for reference date April 1. Data is separated in 2 elevation zones 900m-1500m asl and 1500m-2300m asl. Time period 1943-2023, status 2023-04-17.

Funded currently or in the past by:

- Federal Office of Meteorology and Climatology MeteoSwiss in the context of GCOS Switzerland
- Meteodat GmbH
- Institute of Geography, University of Zurich
- WSL Institute for Snow and Avalanche Research SLF
- Institute of Geography, ETH Zurich (IAC ETH Zurich)
- AG Kraftwerk Wägital (AXPO and EWZ)

See also https://www.meteodat.ch/waegital.html

gcos

display_name: gcos

meteodat-gmbh

display_name: meteodat-gmbh

snow

display_name: snow

snow-water-equivalent

display_name: snow-water-equivalent

wagital

display_name: wagital

en: Snow water equivalent for reference date April 1 for Wägital catchment, starting 1943


en: forest shortwave-radiation fractional-snow shading longwave-radiation

en: Sky-view fraction along the cablecar transect

media_type: text/plain

en: Data is used and described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research. DOI:10.1029/2018JD029908.

mimetype: text/plain

en: Radiation Data 18.04.2019

en:
Spatiotemporal incoming/outgoing shortwave and longwave radiation as well as sunlit and shaded-snow view fractions below an evergreen forest stand in the Swiss alps. Data was collected on 18th of April 2018 along a 48m long, heterogeneous forest stand under full snow cover conditions.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

format: XLS

en: Seasonal sub-canopy radiation data

en:
Seasonal, spatially aggregated incoming and outgoing shortwave radiation below an evergreen forest stand collected with a cable car system.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover Control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: Radiation Data 25.4.2018

en:
Spatiotemporal incoming/outgoing shortwave and longwave radiation as well as sunlit and shaded-snow view fractions below an evergreen forest stand in the Swiss alps. Data was collected on 25th of April 2018 along a 48m long, heterogeneous forest stand under partial snow cover conditions.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: This data set consists of incoming and outgoing short- and longwave radiation as well as sunlit-snow-view-fraction as described in the JGR-Atmospheres paper "Shading by trees and fractional snow cover control the sub-canopy radiation budget", by Malle et al. (2019). Data was collected along a 48m long, heterogeneous forest transect between January and June 2018 close to Davos, Switzerland.

forest

display_name: forest

fractional-snow

display_name: fractional-snow

longwave-radiation

display_name: longwave-radiation

shading

display_name: shading

shortwave-radiation

display_name: shortwave-radiation


maintainer: Adam Winstral

en: jim jules-investigation-model snow snow-simulation snow-depth

en: HS and SWE observations

media_type: application/zip

en: Automated (HS) and manual (SWE) data used to evaluate model simulations

mimetype: application/zip

en: Station forcing data

en: All forcing data need to run JIM at HS and SWE stations. These are data downscaled directly from COSMO NWP data (WY14, WY15) and further enhanced by additional station observations of snow depth (HS) and air temperature (Ta) in WY17. Further information can be found in README file. Note that in WY14 and WY15, shortwave radiation was not split into direct and diffuse (not necessary for JIM) and that the default method in JIM for splitting precipitation phase was used. In WY 17, direct and diffuse were combined as input to JIM and JIM was forced with pre-processed liquid and solid precipitation phases.

en: DEM

en: 1-km resolution DEM used for downscaling gridded NWP data to stations and for distributing BDE evaluations at HS-stations to SWE-stations

en: File/data descriptor

en: These data were used to drive and evaluate Jules Investigation Model (JIM) snow simulations. The data provided are the forcing data used for the "deterministic" runs as described in Winstral et al., 2019. The bias-detecting ensemble (Winstral et al., 2019) used observed snow depths (HS) to detect biases in these deterministic simulations related to precipitation and energy inputs to JIM. Simulations that included the BDE evaluations substantially improved JIM simulations.

jim

display_name: jim

jules-investigation-model

display_name: jules-investigation-model

snow-depth

display_name: snow-depth

snow-simulation

display_name: snow-simulation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Meteorological data used to develop and validate the bias-detecting ensemble (BDE)


en: weisfluhjoch longwave-radiation davos radiation shortwave-radiation

en: Metadata

en: DATA ACCESS

media_type: SMET

en: ASRB radiation station at the Weissfluhjoch versuchsfeld.

en: Parameter file

en: Description of ASRB parameters.

en: Processing doc

en: Description of processing code that was ported to R by P. Frei (2016).

en:
Incoming and outgoing shortwave and longwave 2 min radiation measurements at the Weissfluhjoch research site, Davos, CH. The experimental site at the Weissfluhjoch (WFJ, 46.83 N, 9.81 E) is located at an altitude of 2540 m in the Swiss Alps near Davos. During the winter months, almost all precipitation falls as snow at this altitude. As a consequence, a continuous seasonal snow cover builds up every winter, with a maximum snow height ranging from 153–366 cm over the period 1934–2012. The measurement site is located in an almost flat part of a southeast oriented slope.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

davos

display_name: davos

radiation

display_name: radiation

weisfluhjoch

display_name: weisfluhjoch

en: ASRB_WFJVF: Shortwave and longwave radiation measurements (2 min) at the Weissfluhjoch research site, Davos


en: atmosphere laboratory-study snow-atmosphere-interactions ice chemistry

media_type: zip-compressed folder of csv

en: Near Ambient Pressure partial Auger-Meitner electron yield X-ray absorption spectra and photon flux data. X-ray energy in eV in column 1, analyzer electron count intensity in arb. units in column 2.

en: Processed data as shown in Figure 4 of publication. X-ray energy in eV in column one, electron count intensity in arb. units in column 2.

media_type: .csv

en:
The table lists all NEXAFS raw data with the following columns:

* name:						raw file name
* xRayEkinRange_eV: 		Smallest and largest X-ray photon energy in eV
* scientaPassEnergy_eV: 	Pass energy of electron analyzer in eV
* scientaDwellTime_ms: 		Dwell time of electron analyzer in ms
* regionName:				O K-edge for all data
* scientaAcquisitionMode: 	Fixed energy (snapshot) mode
* scientaEkinRange_eV: 		Smallest and largest energy of the kinetic energy window used for detection in this work
* scientaEkinStep_eV		Not defined in fixed energy mode
* scientaLensMode:			Tune table
* scientaRegionIterations: 	Iterations (sweeps)
* scientaSequenceIterations: Iterations (sweeps)
* sampleTemp_dC: 			Temperature as monitored at the sample holder in °C
* cellPressure_mbar: 		Total pressure in measurement cell in mbar
* iceTemp_dC: 				Temperature of ice sample calculated based on vapour pressure (assuming total pressure equals partial pressure of water) in °C
* smplX_mm: 				positon of measurement spot, x dimension in mm
* smplY_mm: 				positon of measurement spot, y dimension in mm
* smplZ_mm: 				positon of measurement spot, z dimension in mm
* sealingTemp:				temperature at base of sample manipulator
* lastModifiedDatestr: 		time and date when data aquisition was finished
* sample: 					sample description

en: Data are compiled that have been used to demonstrate the impact of high water partial pressure on X-ray absorption spectra of ice.

atmosphere

display_name: atmosphere

chemistry

display_name: chemistry

ice

display_name: ice

laboratory-study

display_name: laboratory-study

snow-atmosphere-interactions

display_name: snow-atmosphere-interactions

en: An ice oxygen K-edge NEXAFS spectroscopy data set on gas-phase processing


en: marine dna-metabarcoding plankton biodiversity fish fjord environmental-dna

en: Code, data and figures

en: Here there are all the data and code to reproduce the figures and analysis presented in the paper, with a README.md file

en: Metabarcoding data

en: Raw metabarcoding data for both primers (teleo and 18S) and corresponding file to perform the demultiplexing and primer trimming

en:
This dataset contains the raw environmental DNA data associated with the publication *Environmental drivers of eukaryotic plankton and fish biodiversity in an Arctic fjord* in the journal Polar Biology (2023).

 Methods

**Sampling**
We sampled the Lilliehöök fjord on the west coast of Spitsbergen (Svalbard, Norway) over 3 days from 3 to 5 of August 2021. Samples were taken from the glacier front up to the fjord mouth of the Krossfjorden system, around 30 km long, after the Lilliehöök fjord merged with the mouth of Möller fjord. The fjord’s maximum depth has been recorded at 373 m (Svendsen et al. 2002) and has no sill at its entrance, thereby facilitating water exchange with the open ocean of the West Spitsbergen Current. We used a research vessel to sample 5 sites for a total of 15 samples, sampling 3 depths per site (3-m, chlorophyll a maximum and 85-m, unless sea floor was shallower). Shallow and intermediate samples between 3-m and 12-m represent ~35-L of water filtered in-situ using long tubing and a peristaltic pump, and all other deeper samples were taken from a total of 3 Niskin bottles (General Oceanics), representing 22-L of water sampled per sample. Water was filtered through a VigiDNA filtration capsule (SPYGEN) with a 0.20-µm pore size using an Athena peristaltic pump (Proactive Environmental Products, Bradenton, Florida) with a flow rate of ~1-L/min. Each sample was handled with single use tubing and gloves.

**Molecular**
To perform the amplification, we used two sets of primers: teleo (forward: ACACCGCCCGTCACTCT, reverse: CTTCCGGTACACTTACCATG; Valentini et al. 2016) and the universal eukaryotic 1389F/1510R primer pair, amplifying the V9-18S rDNA gene (Amaral-Zettler et al. 2009) (forward: TTGTACACACCGCCC, reverse: CCTTCYGCAGGTTCACCTAC).

 Data content:

+ Metabarcoding data: This zip file contains the 2 sequencing libraries filtered to only retain the samples used in the present study.
+ Code, data and figure: This zip file contains all data and code to reproduce the figures and the analysis in the study, with an associated README explaining the content of each folder.

 Additional informations
For more details, please see the Methods in the associated publication: DOI: 10.1007/s00300-023-03187-9.

biodiversity

display_name: biodiversity

dna-metabarcoding

display_name: dna-metabarcoding

environmental-dna

display_name: environmental-dna

fish

display_name: fish

fjord

display_name: fjord

marine

display_name: marine

plankton

display_name: plankton

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data: Environmental drivers of eukaryotic plankton and fish biodiversity in an Arctic fjord


tree-ring-laser-ablation-data

title_for_slug: tree-ring-laser-ablation-data

en: laser-ablation air-pollution dendrochemistry dendrochronology tree-rings

en: Laser ablation data

en:
This dataset contains the values of several chemical elements (Mg, Al, Si, S, K, Ca, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Sr, Tl, Pb, Bi) measured in the latewood of tree rings of Mongolian oak from Harbin, China, at a 5-year resolution. Due to the lack of a suitable reference material for wood, absolute concentration was not calculated, and the ratio between the chemical element and 13C was taken as proxy for the element signal.

In Harbin, one of the largest cities and most important industrial centers in northeastern China, air quality monitoring systems were built only by the end of 2015 to meet the national requirements. Thus, dendrochemical analyses could be used as a tool to complement for the lack of air quality data over longer periods of time, allowing for the reconstruction of the temporal trend of trace metals. Our main scopes were to: (a) assess the chemical composition of Quercus mongolica Fisch. ex Ledeb. tree rings from Harbin using a recently developed system of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), (b) identify the main chemical elements which
derived from air pollution and may be used as indicators over the period 1965–2020 in Harbin, while excluding those that were controlled by physiological processes in the tree, and (c) reconstruct the history of pollution in Harbin by comparing the tree-ring chemical composition of recent decades with that of previous decades, in trees growing in the highly polluted city of Harbin and in trees growing in a control site 90 km away from major pollution sources.

Briefly, the temporal trend of some elements was influenced by physiological factors, by environmental factors such as pollution, or influenced by both. Mg, K, Zn, Cu, Ni, Pb, As, Sr and Tl showed changes in pollution levels over time.

air-pollution

display_name: air-pollution

dendrochemistry

display_name: dendrochemistry

dendrochronology

display_name: dendrochronology

laser-ablation

display_name: laser-ablation

tree-rings

display_name: tree-rings

en: Tree-ring laser ablation data


maintainer: Yves Bühler

en: hazard-indication-mapping hazard-mapping snow ramms release avalanche

en: Potential Release  Area  NHESS

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en: RAMMS simulations NHESS

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

hazard-mapping

display_name: hazard-mapping

ramms

display_name: ramms

release

display_name: release

snow

display_name: snow

en: Automated Avalanche Release Area (PRA) Delineation Davos


maintainer: Chunhong Zhao

en: austin land-dynamics urban-morphology landscape land-use

en: Land use dynamics in Austin since 1992

media_type: img

en: The present dataset is part of the published scientific paper Zhao C, Weng Q, Hersperger A M. Characterizing the 3-D urban morphology transformation to understand urban-form dynamics: a case study of Austin, Texas, USA. Landscape and urban planning, 2020, 203:103881. The overall objective of this paper is to understand urban form dynamics in the Austin metropolitan area for the periods 2006–2011 and 2011–2016. The study also aims to understand to what extent the changes in the built environment (in terms of ‘efficient growth’ versus ‘inefficient growth’) from the 1990s to 2016 in the Austin metropolitan area corresponded with ‘compact and efficient growth’ planning policy documents. The UMT distribution can be found in the paper. The area of transitioning UMT was provided in Table 2 and Table 3 can be found in the Appendix of the paper. A protocol was developed to perform the content analysis of the strategic plans and gather the data. The detailed list of protocol items can be found in Appendix B of the paper. This study demonstrates the advantage of applying Lidar data to characterize 3-D urban morphology type (UMT) transition and understand its dynamics, which helps develop a comprehensive understanding of the urbanization process and provides a tool for planning intentions and policies evaluation on urban development over time. The UMT maps can be found in Appendix A of the paper. The Lidar point datasets and the 30 × 30 m National Land Cover Database (NLCD) are the two main data sources of UMT mapping. Lidar datasets were gathered from different projects that had been conducted and collected by state agencies and other organizations between 2007 and 2017. Table A1 in the appendix in the paper shows the accuracies and acquisition parameters of the Lidar projects from 2007 to 2017. Land use/cover dynamics in Austin metropolitan area dataset provides Land use/cover patterns in the years 1992, 2001, 2004, 2006, 2008, 2011, 2013, 2016 with a spatial resolution of 30 meters. Since NLCD 1992 used a different classification system for the urban land classes, we first reclassified the NLCD 1992 using a customized Arcpy package.

austin

display_name: austin

land-dynamics

display_name: land-dynamics

land-use

display_name: land-use

landscape

display_name: landscape

urban-morphology

display_name: urban-morphology

en: Land use/cover dynamics in Austin metropolitan area since 1992


dischmex-meteorological-measurements

maintainer: Rebecca Mott

title_for_slug: dischmex-meteorological-measurements

en: meteo-station dischmex meteorological-data dischma meteorological-measurements

en: Meteorological measurements 2014

media_type: application/pdf

en: Location of the meteorological stations

en: Meteorological measurement 2014

en: data

en: Meteorological measurements 2016

en: Overview sensors

en: Meteorological measurement 2015

en:
Meteorological measurements recorded in the Dischma valley from 2014-2016. In 2014 and 2015 we used 11 mobile weather stations from sensorscope to record meteorological parameter in the upper Dischma valley in the closer surroundings of the Gletschboden area. The meteorological stations are eqiupped with at least air temperature/humidity, wind velocity and wind direction sensors. Some stations are additionally equipped with precipitation, shortwave radiation and snow surface temperature sensors.
Three transects were installed at different aspects and were equipped with air temperature/humidity and wind sensors. Transect 1 (stations 2-4) provides meteorological Information on an east-north-east facing slope at elevations ranging between 2100 m and 2500 m. Transect 2 (stations 5-7) provides meteorological Information on a south-west slope and transect 3 (stations 8-10) on a north-west slope. Station 1 is fully equipped with meteorological sensors (temperature/humidity, wind, IR, up and downwand shortwave radiation and precipitation).
In 2016, mobile stations from sensorscope were replaced with six permanent meteorological stations. Meteorological stations 1-3 are equipped with an air temperature/humidity sensor, two wind speed sensors, a wind direction sensor and an incoming and outgoing shortwave radiation sensor. Stations 4 and 6 are equipped with an air temperature/humidity sensor and a wind speed/direction sensor. Station 5 is a equipped with an air temperature/humidity sensor, a wind speed/direction sensor, a snow surface temperature sensor, an incoming and outgoing shortwave radiation sensor and an incoming longwave radiation sensor.

dischma

display_name: dischma

dischmex

display_name: dischmex

meteo-station

display_name: meteo-station

meteorological-data

display_name: meteorological-data

meteorological-measurements

display_name: meteorological-measurements

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: DISCHMEX - Meteorological measurements


maintainer: Athanasios Nenes

en: cloud-modeling supersaturation wolfgangpass raclets cloud-droplets sigma-w

en: Predicted cloud droplet numbers (kappa=0.1) Davos Wolfgang

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Davos Wolfgang station between February 24 and March 8 2019. For this, as a sensitivity test, a hygroscopicity parameter of 0.1 is assumed, which is the lower limit determined from the analysis carried out for Weissfluhjoch (https://www.envidat.ch/dataset/ccn-hygroscopicity-predicted-cloud-droplet-numbers-weissfluhjoch). The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Predicted cloud droplet numbers (kappa=0.25) Weissfluhjoch

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Davos Wolfgang station between February 24 and March 8 2019. For this, as a sensitivity test, a hygroscopicity parameter of 0.25 is assumed, which is the upper limit determined from the analysis carried out for Weissfluhjoch (https://www.envidat.ch/dataset/ccn-hygroscopicity-predicted-cloud-droplet-numbers-weissfluhjoch). The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Cloud droplet properties were predicted between February 24 and March 8 2019 for the measurement site Davos Wolfgang (1630 m a.s.l., LON: 9.853594, LAT: 46.835577). Droplet calculations are carried out with the physically based aerosol activation parameterization of Morales and Nenes (2014), employing the “characteristic velocity” approach of Morales and Nenes (2010). Aerosol size distribution observations required to predict the cloud droplet numbers and maximum in-cloud supersaturation are obtained from a Scanning Mobility Particle Size Spectrometer (SMPS) instrument deployed at Davos Wolfgang (https://www.envidat.ch/dataset/aerosol-data-davos-wolfgang). The required vertical velocity measurements are derived from the wind Doppler Lidar (https://www.envidat.ch/dataset/lidar-wind-profiler-data) deployed at the same station and are extracted from the first bin of the instrument, being 200 m above ground level. The hygroscopic properties of the particles measured at Davos Wolfgang could not be estimated, owing to a lack of concurrent CCN measurements. As a sensitivity test, droplet calculations are performed assuming two different values of the aerosol hygroscopicity parameter, 0.1 and 0.25, based on the analysis carried out for Weissfluhjoch. Additional information can be found in Section 2.3 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

cloud-droplets

display_name: cloud-droplets

cloud-modeling

display_name: cloud-modeling

raclets

display_name: raclets

sigma-w

display_name: sigma-w

supersaturation

display_name: supersaturation

wolfgangpass

display_name: wolfgangpass

en: Predicted cloud droplet numbers Davos Wolfgang


maintainer: Achille Capelli

en: lwc gps swe gnss liquid-water-content snow-water-equivalent snow

en: Webcam images

en: Webcam images showing some typical differences in the snow conditions at the four sites (Küblis, Klosters, Laret and Weissfluhjoch) for two time periods (14-18.3.2019 and 27.1-11.2.2020). Both time periods included a precipitation event with partial rain-on–snow occurring at the lower locations.

en: GNSS derived SWE, HS, and LWC for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: GNSS derived SWE, LWC and HS from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-20

en: Snow profiles data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Snow and meteo data from automatic sensors from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: Daily data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Snow and meteo data from automatic sensors from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: Snow and meteo data from automatic sensors for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: GNSS derived data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Daily observer data from automatic sensors from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: Daily data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Daily observer data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: Manual profiles

en: Data of the traditional manual profiles for the locations Weissfluhjoch, Klosters and Küblis. For the location of Küblis there are no traditional manual profile data. We provided the data as both PDF and .CAAML format (See https://niviz.org/ or http://caaml.org/Schemas/V5.0/Profiles/SnowProfileIACS/CAAMLv5_SnowProfileIACS.pdf). Moreover, we added LWC and density profiles when available (all locations).

en: Snow and meteo data from automatic sensors for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Snow profiles data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: GNSS derived SWE, LWC and HS from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-20

en: Daily data from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Daily data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Profile data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Daily observer data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Snow profiles data from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: This database contains GNSS derived snow water equivalent (SWE), liquid water content (LWC), and snow height (HS) and reference data collected during the two winter 2018-2020 at 4 sites Weissfluhjoch (2540 m asl, 46°49’47’’ N, 9°48’34’’E), Laret (1515 m asl, . 46°50’2’’N, 9°52’17’’E), Klosters (1200 m asl, 46°51’49’’N, 9°53’17’’E), and Küblis (815 m asl, 46°54’48’’N, 9°46’54’’E).

gnss

display_name: gnss

gps

display_name: gps

liquid-water-content

display_name: liquid-water-content

lwc

display_name: lwc

snow

display_name: snow

en: Snow water equivalent measurements with low-cost GNSS receivers along a steep elevation gradient in the East-ern Swiss Alps


maintainer: Francesco Comola

en: cohesion sediment snow wind saltation sand

en: Output of the model simulations

en: Model results on granular splash and saltation process of sand and snow particles

en:
The wind-driven saltation of sand and snow shapes dunes and ripples, generates dust emission, and erodes the surface of the Antarctic ice sheet. Here, we use a model based on the discrete element method to simulate grain-flow interactions and study the effect of particle cohesion on saltation dynamics.

The data contains the model output of granular splash simulations and saltation simulations. Granular splash, the main particle entrainment process in saltation, occurs upon impact of saltating particles with the granular bed. We performed Monte Carlo simulations of granular splash for loose sand grains and for cohesive ice grains. The analysis indicate that different values of cohesion have significant effects not on the number of splashed grains, on the ejection velocity, and the rebound velocity.

In our saltation simulations, we trigger particle movement with a single splash event at the inlet section section and let the system evolve until steady state. Our results show that saltation over cohesive surfaces is difficult to initiate but easy to sustain at low wind speed. The occurrence of transport thus depends on the history of the wind speed, a phenomenon known as hysteresis. We also show that saltation over cohesive surfaces presents higher mass fluxes but requires longer distances to saturate, which increases the size of the smallest stable surface ripples. Our model results have implications for large-scale aeolian processes on Earth and Titan, where sand grains are thought to be very cohesive.

cohesion

display_name: cohesion

saltation

display_name: saltation

sand

display_name: sand

sediment

display_name: sediment

wind

display_name: wind

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Saltation of cohesive granular materials


en: long-term-experiment afforestation mountain-forest treeline stillberg

en:
 Background information

The Stillberg ecological treeline research site in the Swiss Alps was established in 1975, with the aim to develop ecologically, technically, and economically sustainable reforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Long-term monitoring of the large-scale high-elevation afforestation has generated data about tree growth, survival, and vitality. In addition, detailed characteristics of the microsite conditions of the research were conducted. Besides providing a scientific basis and practical guidelines for high-elevation afforestation, this research has contributed to a comprehensive understanding of ecological processes in the treeline ecotone.

 Experiment description

The Stillberg afforestation experiment was established in 1975 by planting 92,000 seedlings of *Larix decidua*, *Pinus cembra* and *Pinus mugo* ssp. *uncinata* in the alpine treeline ecotone. The afforestation site is located on a northeast-facing slope with steep, topographically highly structured terrain and covers elevations from 2075 to 2230 m a.s.l. The afforestation site was divided into 4052 square plots of 3.5 × 3.5 m, arranged in a regular species-alternating pattern over the whole area. Each plot contained 25 trees of one species (1350 plots per species), and the seedlings were systematically planted 70 cm apart. The trees have been monitored since 1975. Specifically, tree mortality was assessed annually from 1975 until 1995 and has been documented every ten years since then, with surveys in 2005 and 2015 (the next survey is due in 2025). Height of the surviving trees was measured in 1975, 1979, 1982, 1985, 1990, 1995, 2005, and 2015. In 1995, 2005, and 2015, drivers of tree vitality were assessed for a subset of trees per plot. Additionally, an extensive set of environmental parameters characterizing microsite conditions of the afforestation area were recorded before and after the planting of the trees.

 Data description

The five datasets from the afforestation experiment comprise ecological and environmental data from the main afforestation experiment in five datasets with accompanying metadata (Stillberg_afforestation_all_metadata.xlsx). All data and metadata files are bundled in a ZIP-file (Stillberg_afforestation_v1.zip). In particular, a first dataset contains environmental data characterising microsite conditions of the 4000 plots with regard to soil, topography, vegetation and microclimatic conditions (Stillberg_afforestation_plot_data_v1.csv; Stillberg_afforestation_plot_metadata_v1.csv. In each plot, the natural tree regeneration was assessed by counting seedings of several tree species in 2005 and 2015 (Stillberg_afforestation_regeneration_data_v1.csv; Stillberg_afforestation_regeneration_metadata_v1.csv). Furthermore, specific information about each of the 92’000 planted trees of the tree species is available (Stillberg_afforestation_tree_parameter_data_v1.csv; Stillberg_afforestation_tree_parameter_metadata_v1.csv). Survival data for each of the 92’000 individual trees can be found in a separate dataset (Stillberg_afforestation_tree_survival_data_v1.csv; Stillberg_afforestation_tree_survival_metadata_v1.csv). Tree growth and vitality parameters are available for all trees from 1995, and for subsets of trees for 2005 and 2015 (Stillberg_afforestation_tree_measurements_data_v1.csv; Stillberg_afforestation_tree_measurements_metadata_v1.csv).

afforestation

display_name: afforestation

long-term-experiment

display_name: long-term-experiment

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline

display_name: treeline

en: Long-term afforestation experiment at the Alpine treeline site Stillberg, Switzerland


aerosol-data-davos-wolfgang

title_for_slug: aerosol-data-davos-wolfgang

en: drincz raclets particles aerosol inp ice-nucleation

en: APS Dataset Davos Wolfgang

media_type: application/x-netcdf

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Davos Wolfgang.

mimetype: application/x-netcdf

en: DRINCZ Dataset Davos Wolfgang

en: The DRINCZ file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en: OPC-N3 Dataset Davos Wolfgang

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: SMPS Dataset Davos Wolfgang

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity), in a temporal resolution of 2 minutes, with time in UTC, measured at Davos Wolfgang.

en: OPC GT-526S Dataset Davos Wolfgang

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs) and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3788 , TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and DRINCZ: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l minˉ¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the DRoplet Ice Nuclei Counter Zurich (DRINCZ, ETH Zurich) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

drincz

display_name: drincz

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

particles

display_name: particles

raclets

display_name: raclets

en: Aerosol Data Davos Wolfgang


en: soil-moisture snowmelt climate-change discharge precipitation hydrology

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of the 307 medium-sized catchments in Switzerland. The "gridcode" provides the ID of the catchment used in the datafiles.

en: Daily simulated data for the reference period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the reference period 1981-2017 in mm.

en: Daily simulated data for the future period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the period 1981-2100 in mm for the 307 catchments.

en:
Daily discharge and the related hydro-meteorological variables precipitation, snowmelt, and soil moisture are provided for current (1981-2017) and for future climate conditions (1981-2100) for 307 medium-sized catchments in Switzerland. The catchments have a median catchment area of 117 km². The 307 catchments together form a set representative of the climatological conditions and runoff characteristics in Switzerland. The four variables were simulated at a daily resolution using the hydrological model PREVAH. PREVAH is a conceptual process-based model that was run in this study in its fully distributed version on a 500 m grid (Viviroli et al. 2009a). For the calibration, runoff time series from 140 mesoscale catchments covering the different runoff regimes were used. The model calibration was conducted over the period 1993-1997. Verification was performed on the period 1983-2005 using (i) volumetric deviation (Viviroli et al. 2007) and (ii) benchmark efficiency (Schäfli et al 2007) as objective functions. The calibration and validation procedures are described in detail in Köplin et al. (2010). The parameters for each model grid cell were derived by regionalizing the parameters obtained for the 140 catchments with a procedure based on ordinary kriging (Viviroli et al. 2009b, Köplin et al. 2010).
The calibrated and validated model was then driven with transient meteorological data (precipitation, temperature, radiation, and wind) representing both reference (1981-2017) and future climate conditions (2018-2099). The data were derived from the CH2018 climate scenarios (NCCS 2018) provided by the Swiss National Centre for Climate Services (NCCS). They were obtained from climate experiments produced with different climate modeling chains, consisting of a global and a regional circulation model each, within EUROCORDEX for three representative concentration pathways (RCP) emission scenarios. Downscaled output of ten climate model chains derived by quantile mapping were considered. The focus was on the chains of the EUR-11 domain with a horizontal resolution of 0.11 degrees (roughly 12.5 km). The climate model chains (GCM, RCM, RCP, and grid resolution) used are listed below:

- ICHEC-EC-EARTH	DMI-HIRHAM5	2.6	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	4.5	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	8.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	2.6	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	4.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	8.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	4.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	8.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	4.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	8.5	EUR-11

*References*:

-	Köplin, N., D. Viviroli, B. Schädler, and R. Weingartner (2010), _How does climate change affect mesoscale catchments in Switzerland? - A framework for a comprehensive assessment_, Advances in Geosciences, 27, 111-119, doi:10.5194/adgeo-27-111-2010.
-	National Centre for Climate Services (2018), CH2018 - _Climate Scenarios for Switzerland_, Tech. rep., NCCS, Zurich.
-	Schäfli, B., and H. V. Gupta (2007), _Do Nash values have value?_, Hydrological Processes, 21, 2075-2080, doi:10.1002/hyp.6825.
-	Viviroli, D., J. Gurtz, and M. Zappa (2007), _The hydrological modelling system PREVAH. Part II - Physical model description_, Geographica Bernensia, 40, 1-89.
-	Viviroli, D., M. Zappa, J. Gurtz, and R. Weingartner (2009a), _An introduction to the hydrological modelling system PREVAH and its pre- and post-processing-tools_, Environmental Modelling & Software, 24, 1209-1222, doi:10.1016/j.envsoft.2009.04.001.
-	Viviroli, D., H. Mittelbach, J. Gurtz, and R. Weingartner (2009b), _Continuous simulation for flood estimation in ungauged mesoscale catchments of Switzerland-Part II: Parameter regionalisation and flood estimation results_, Journal of Hydrology, 377 (1), 208-225, doi:10.1016/j.jhydrol.2009.08.022.

climate-change

display_name: climate-change

discharge

display_name: discharge

hydrology

display_name: hydrology

precipitation

display_name: precipitation

snowmelt

display_name: snowmelt

soil-moisture

display_name: soil-moisture

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Simulated future discharge and climatological variables for medium-sized catchments in Switzerland


en: snowpack-simulation avalanche-activity avalanche time-lapse-photography glide-snow-avalanche

en: Glide-snow avalanche activity

en: Table that contains all glide-snow avalanche events that were detected in time-lapse photographs (season 2008/09 to 2021/22). The columns are explained in the README.txt

en: README

media_type: .txt

en: README.txt explaining the dataset and columns of tables in more detail.

en: SNOWPACK simulations

media_type: .pro

en: SNOWPACK simulations (.pro and .smet) covering season 2008/09 to 2021/22 at 10 virtual locations on Dorfberg. The locations correspond to the most common glide-snow avalanche paths.

en: Glide distances for opening glide-cracks

en: This folder contains all glide-cracks where glide-distances were extracted from time-lapse photographs. Glide-distances were calculated in x-direction (width) and y-direction (downslope, length) by georeferencing the images.

en:
This dataset includes the processed data of the glide-snow avalanche activity and dynamics on Dorfberg (Davos, Switzerland) covering seasons 2008/09 to 2021/22. This dataset was described in the research article:

Fees, A., van Herwijnen A., Altenbach, M., Lombardo, M., Schweizer, J.: Glide-snow avalanche characteristics at different time-scales extracted from time-lapse photography, Annals of Glaciology, 91

We extracted the dynamics of opening glide-cracks and the glide-snow avalanche activity from time-lapse photographs. Glide-snow avalanches were separated into surface and interface events using the liquid water content which was simulated with SNOWPACK at 10 virtual stations on Dorfberg.

avalanche

display_name: avalanche

avalanche-activity

display_name: avalanche-activity

glide-snow-avalanche

display_name: glide-snow-avalanche

snowpack-simulation

display_name: snowpack-simulation

time-lapse-photography

display_name: time-lapse-photography

en: Glide-snow avalanche activity on Dorfberg, Davos, Switzerland


en: numerical-simulation meteoswiss cosmo-wrf complex-terrain high-resolution

en: MeteorologicalData

en: Scripts to process meteorological data (see Section 2 in COSMOWRFdocumentation.pdf).

en: WPSrun

en: Scripts to run the WRF pre-processing (WPS) for COSMO-WRF simulation (see Section 5 in COSMOWRFdocumentation.pdf)

en: WRFrun

en: Scripts to run COSMO-WRF simulation (see Section 6 in COSMOWRFdocumentation.pdf)

en: StaticData

en:
Scripts to process geographical/static data (see Section 3 in COSMOWRFdocumentation.pdf).
- ascii_to_bin_landuse.f90
- ascii_to_bin_soiltype.f90
- ascii_to_bin_topo_wgs84_ws2sf1.f90
- see_slopes.ncl
- soiltype_writing.py
- toposmooth_wgs84_cosmobound.ncl
- write_geogrid.o

en: Postprocessing

en: Postprocessing scripts to map WRF output on swiss coordinates (see Section 7 in COSMOWRFdocumentation.pdf)

en: COSMO-WRF documentation v1.0

en:
Gerber, Franziska; Sharma, Varun (2018). Running COSMO-WRF on very-high resolution over complex terrain. EnviDat. doi:10.16904/envidat.35

Documentation about the procedure to run COSMO-WRF

en: WPSSetup

en: Scripts that need to be changed to compile WPS (see COSMOWRFdocumentation.pdf, Section 4)

en: This is a technical documentation of the procedure to run the Weather Research and Forecasting (WRF) model over complex alpine terrain using Consortium for Small-Scale Modeling (COSMO) reanalysis by the Federal Office of Meteorology and Climatology (MeteoSwiss) as initial and boundary conditions (COMSO-WRF). The setup is adapted for very high resolution simulations based on COSMO-2 (2.2 km resolution) reanalysis. This document gives an overview over steps to setup COSMO-WRF and adaptations needed to run COSMO-WRF. Additionally, the calculation of precipitation rate at a horizontal plane and remapping COSMO-WRF output on Swiss coordinates are documented.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

high-resolution

display_name: high-resolution

meteoswiss

display_name: meteoswiss

numerical-simulation

display_name: numerical-simulation


root-traits

maintainer: Ivano Brunner

title_for_slug: root-traits

en: drought soil-coring belowground-biomass fine-root-traits ingrowth-cores

en: Root-traits

en:
Fine-root traits of Scots pine in response to enhanced soil water availability deriving from long-term irrigation in the Pfynwald

Data_Fig.1.xlsx
Fine-root biomass of the topsoil (0-10 cm) in the dry and irrigated treatment of the Scots pine forest of the years 2003 to 2016 recorded by soil coring

Data_Tab1+2_2005.xlsx
Fine-root traits from roots of ingrowth cores from 2005 after two years of growth in the dry and irrigated treatment of the Scots pine forest

Data_Tab1+2_2016.xlsx
Fine-root traits from roots of ingrowth cores from 2016 after two years of growth, and from roots of the soil-coring sampling from 2016 in the dry and irrigated treatment of the Scots pine forest

belowground-biomass

display_name: belowground-biomass

drought

display_name: drought

fine-root-traits

display_name: fine-root-traits

ingrowth-cores

display_name: ingrowth-cores

soil-coring

display_name: soil-coring

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: snow snow-profile snow-water-equivalent gcos snow-height

en: DATA ACCESS

media_type: CSV

en: STATION METADATA

en: Snowprofile from 11 observer sites in Switzerland compiled for the Global Climate Observing System (GCOS). Height of snow (cm) and snow water equivalent (mm) are recorded every 2 weeks since the 1947 (depending on station). Attached metadata file gives details of each station.

gcos

display_name: gcos

snow

display_name: snow

snow-height

display_name: snow-height

snow-profile

display_name: snow-profile

snow-water-equivalent

display_name: snow-water-equivalent

en: GCOS SWE data from 11 stations in Switzerland


en: terrestrial-laser-scans terrestiral-laserscanning depth-of-snowfall gridded-data antarctica

en: Scan from 21 December 2018, 1 mm resolution

media_type: ascii x, y, z

en: Scan from 4 January 2019, 10 cm resolution

en: Scan from 4 January 2019, 1 mm resolution

en: Scan from 11 January 2019, 1 mm resolution

en: Scan from 2 January 2019, 1 mm resolution

en: Scan from 27 December 2018, 10 cm resolution

en: Scan from 27 December 2018, 1 mm resolution

en: Scan from 2 January 2019, 10 cm resolution

en: Deprecated: Scan from 11 January 2019, 10 cm resolution, version 1

en: This resource is deprecated. It contains erroneous data.

en: Scan from 21 December 2018, 10 cm resolution

en: Scan from 11 January 2019, 10 cm resolution, version 2

en:
Surface topography maps (spatial extent: 400 m x 400 m) obtained at approximately 300 m from the top of the Hammarryggen Ice Rise in Dronning Maud Land, East Antarctica, using a Riegl VZ-6000 Terrestrial Laser Scanner (TLS). Scans were obtained on 5 days in the 2018-2019 Austral summer: on December 21 and 27, and January 2, 4 and 11. By using reflectors installed on bamboo poles, scans were registered with respect to the reflectors, such that the difference between two successive scans reveals the spatial patterns of erosion and deposition of snow. On each scan day, we used multiple scan positions to create one combined point cloud. After applying an octree filter on the point cloud, a 3D surface was obtained. For each day, the dataset contains a 1 mm and a 10 cm octree filter resolution file, only including points in a 400 m x 400 m area centered around the scan positions.

Notes:

* All files in the dataset are in the same coordinate system. However, this coordinate system is arbitrary (i.e., not related to any global coordinate system).

* From the installed reflectors, 4 reflectors could be used over the full period. The scan accuracy is generally higher within the area enclosed by the reflectors.

* The scans from January 2 were found to have exhibited small tilt during the scan and are of lesser accuracy.

* By walking along fixed corridors, disturbance of the snow was limited.

antarctica

display_name: antarctica

depth-of-snowfall

display_name: depth-of-snowfall

gridded-data

display_name: gridded-data

terrestiral-laserscanning

display_name: terrestiral-laserscanning

terrestrial-laser-scans

display_name: terrestrial-laser-scans

en: Terrestrial laser scans on Hammarryggen Ice Rise, Dronning Maud Land, East Antarctica


intratrait

maintainer: Christian Rixen

title_for_slug: intratrait

en: climate-change elevation-range neighbour-interactions cold-adapted-plants plant-traits elevation-gradient

en: Plant trait data along elevation gradients on mountains

media_type: R

en:
This data set was used to test whether species specialized to high elevations or with narrow elevational ranges show more conservative (i.e. less variable) trait responses across their elevational distribution, or in response to neighbours, than species from lower elevations or with wider elevational ranges. We did so by studying intraspecific trait variation of 66 species along 40 elevational gradients in four countries (Switzerland, Australia, New Zealand, China) in both hemispheres. As an indication of potential neighbour interactions that could drive trait variation, we also analysed plant species’ height ratio, its height relative to its nearest neighbour.
The following traits and parameters were measured and are available in this data set:
As an indication of plant stature, we measured vegetative and generative height, where vegetative height was distance from soil to highest vegetative leaf and generative height was distance to the highest point on the reproductive shoot. As a measure of reproductive investment, we noted the presence of flowers on the randomly chosen individuals (see below). As a measure of individual and genet basal area, we measured individual plant and patch diameters, in two dimensions (along the largest diameter and perpendicular to it). In clonal plant species, plant diameter was equivalent to an individual rosette, whereas patch diameter referred to the whole genet and could represent the size of a tuft, tussock or cushion. For genera with more singular growth forms (e.g., some Gentiana species) plant and patch diameter were the same. The two diameter measurements were made at right angles, allowing estimates of patch and plant areas to be calculated as an ellipse (i.e., area = 0.5 a 0.5 b Π). All traits were measured on ten randomly selected individuals per site. Flower count data was considered in a binary fashion on a per individual basis (because for some species individuals only produce one flower when flowering) so that the presence or absence of flower(s) was a nominal value between 0 and 10 for each species at each site. We then collected at least three leaves (up to 30 for small and light leaves) from each of the first three individuals selected from each species for determination of leaf dry matter content (LDMC) and specific leaf area (SLA). For calculations of LDMC and SLA, fresh leaves were scanned on a flatbed scanner to determine leaf area. Leaves were then weighed on a balance to a precision of +/- 0.001g, prior to being air dried and reweighed with a balance to a precision of +/- 0.0001g. LDMC was calculated by dividing dry leaf mass by fresh leaf mass. SLA was calculated by dividing leaf area by dry leaf mass. Additionally, within an area of 10 cm diameter around the target individual, we determined the tallest neighbouring species and measured its vegetative and generative height, and estimated the percent cover of the target species, other vegetation, rock, and bare soil.
For more details see Rixen et al. 2022, Journal of Ecology.

climate-change

display_name: climate-change

cold-adapted-plants

display_name: cold-adapted-plants

elevation-gradient

display_name: elevation-gradient

elevation-range

display_name: elevation-range

neighbour-interactions

display_name: neighbour-interactions

plant-traits

display_name: plant-traits

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: intratrait


maintainer: Océane Hames

en: openfoam arctic-sea-ice snow-deposition snow-transport mosaic

en: MOSAiC Met City preliminary (Level 2) wind data

en:
Extract from the preliminary MOSAiC atmospheric data (Level 2) for the time period 6th to 13th of November, 2019.
This data was used to set up the fluid forcing parameters in the snowBedFoam simulations on MOSAiC sea ice. It is being published in this repository with the kind permission from Matthew Shupe and his team.
The final processed and quality controlled version of this dataset (Level 3) has not been published yet. A complete reference will be added in this description once it is released.

en: snowBedFoam 1.0.

media_type: .zip

en:
OpenFOAM-2.3.0. scripts containing the implemented Eulerian-Lagrangian snow transport model.

The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en: Paper Draft

media_type: PDF

en: This is the initial draft of the paper where the snowBedFoam 1.0. results are tested against Terrestrial Laser Scan (TLS) measurements of snow dynamics on Arctic sea ice (MOSAiC expedition). It highlights the numerical limitations of our model as well as the measurement uncertainties, which may occur in such extreme environments.

en:
snowBedFoam 1.0. is a snow transport solver implemented in the Computational Fluid Dynamics (CFD) software OpenFOAM. It is adapted from the standard multi-phase flow solver DPMFoam for application in snow-influenced environments.

To simulate aeolian snow transport, snowBedFoam 1.0. handles coupled Eulerian–Lagrangian phases, which involve a finite number of particles (snow) spread in a continuous phase (air). The snow erosion and deposition are modelled through physically-based equations such as the ones employed in the well-established LES-Lagrangian Stochastic Model (Comola and Lehning, 2017 ; Sharma et al., 2018). This modelling approach is computationally intensive and thus adapted to simulate snow movement and distribution on small scale terrain.

snowBedFoam 1.0. was tested against topographical data collected on Arctic sea ice during the MOSAiC expedition (Clemens-Sewall, 2021) . Together with atmospheric data from the MOSAiC Met City (Shupe et al., 2021) used for the fluid forcing, the model was able to accurately simulate the zones of erosion and deposition of snow along a complex ice ridge structure.

The core code of snowBedFoam 1.0. is also accessible on the WSL/SLF GitLab repository (more details in the Resources section).

arctic-sea-ice

display_name: arctic-sea-ice

mosaic

display_name: mosaic

openfoam

display_name: openfoam

snow-deposition

display_name: snow-deposition

snow-transport

display_name: snow-transport

en: snowBedFoam: an OpenFOAM Eulerian-Lagrangian solver for modelling snow transport


en: qgis-plugin digital-elevation-model open-source digital-planning geoinformation-software swiss-geodata cable-yarding seilaplan swisstopo

en: Herunterladen des DHM von swisstopo Website

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. As an alternative to using the ‘Swiss Geo Downloader’ plugin, the DTM can be obtained directly from Swisstopo. In this tutorial we explain step by step how to download the necessary DTM from the Swisstopo Website, and how to use it in QGIS for the digital planning of a cable line using the plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to the elevation model on the swisstopo website: https://www.swisstopo.admin.ch/de/geodata/height/alti3d.html#technische_details

Link to the rope map website: https://seilaplan.wsl.ch

********************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Als Alternative zum Swiss Geo Downloader erklären wir in diesem Tutorial Schritt für Schritt, wie man das nötige Höhenmodell von der Swisstopo Webseite herunterladen und in QGIS zur Seillinienplanung verwenden kann.

Link zum Höhenmodell auf der swisstopo Webseite: https://www.swisstopo.admin.ch/de/geodata/height/alti3d.html#technische_details

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-software

display_name: geoinformation-software

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

swisstopo

display_name: swisstopo

en: Seilaplan Tutorial: DTM download from swisstopo website