maintainer: Lisa Hülsmann

en: forest-inventory fagus-sylvatica forest-reserves mortality-models primeval-forests tree-mortality

en: Ukrainian data

en:
READ ME for

Hülsmann L, Bugmann H, Commarmot B, Meyer P, Zimmermann S, Brang P
Data from: Does one model fit all? Patterns of beech mortality in natural forests of three European regions.
Ecological Applications http://dx.doi.org/10.5061/dryad.h4s6t

Forest inventory data of beech for the development of individual-tree mortality models from strict forests reserves in Switzerland, Germany and Ukraine.

The data package provides the files
CH_reduced: inventory data of the reduced dataset from Switzerland that was used to assess the influence of additional environmental and stand characteristics on beech mortality
CH: inventory data from strict forest reserves in Switzerland
DE: inventory data from strict forest reserves in Germany
UA: inventory data from a primeval beech forest in Ukraine

A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.
Diameter at breast height: dbh (mm)
Annual relative basal area increment: relBAI (), calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area (Bigler and Bugmann 2004)
Status of the tree: y, 0 = alive, 1 = dead
Length of the mortality period: dt (years)

Additional environmental and stand characteristics were derived for the reduced Swiss dataset.
Note the varying seasonal level of the covariates considering the entire year, the growing season from April to September (G) and the winter month January to March (W).
All climatic covariates were calculated for both the ‘growth’ (2) and the ‘mortality’ period (3). The stand covariates were derived for the second inventory of each record (2).

Mean diameter at breast height: dbh.mean.2 (mm)
Interquartile range of diameter at breast height: dbh.IQR.2 (mm)
Median diameter at breast height: dbh.median.2 (mm)
Basal area per hectare: BA.2 (m2 ha-1)
Number of trees per hectare: N.2 (ha-1)
pH-value: pH ()
Available water capacity in the soil: AWC (mm)
Mean annual precipitation sum: P.2, P.3 (mm)
Mean precipitation sum during growing season: PG.2, PG.3 (mm)
Mean annual air temperature: mT.2, mT.3 (°C)
Mean air temperature during growing season: mTG.2, mTG.3 (°C)
Mean air temperature during winter months: mTW.2, mTW.3 (°C)
Mean growing degree-days: GDD.2, GDD.3 ()
Mean number of months during growing season with water deficit: mDEFdurG.2, mDEFdurG.3 ()
Mean annual maximum water deficit: mDEFmax.2, mDEFmax.3 (mm)
Overall maximum of the annual maximum water deficit: maxDEFmax.2, maxDEFmax.3 (mm)
Mean of cumulative water deficit during growing season: mDEFcumG.2, mDEFcumG.3 (mm)
Overall maximum of cumulative water deficitduring growing season: maxDEFcumG.2, maxDEFcumG.3 (mm)
Percentage of years with at least one month water deficit: percDEF.2, percDEF.3 (%)

en: Swiss data full

en: Swiss data reduced

en: German data

en:
The datasets comprise nearly 19’000 trees of European beech (_Fagus sylvatica_ L.) from unmanaged forests in Switzerland, Germany / Lower Saxony and Ukraine. Tree death was modelled as a function of size and growth, i.e., stem diameter (DBH) and relative basal area increment (relBAI). To explain the spatial and temporal variability in mortality patterns, we considered a large set of environmental and stand characteristics.

 Inventory data
The strict forest reserves in Switzerland and Germany had been established in the period of 1961-1975 and 1971-1974, respectively. Every reserve included up to 10 permanent plots ranging from 0.09 to 1.8 ha in size, with slightly irregular re-measurement intervals. Permanent plots with pure or mixed beech stands were selected from the reserves of both networks. Reserves with considerable wind disturbance during the monitored intervals were excluded from the analysis. In addition to data from the Swiss and German reserves, data from a 10 ha plot in the primeval beech forest Uholka in Western Ukraine including three remeasurements were used. The inventory data provide diameter measurements at breast height (dbh) for revisited trees with a diameter of more than 4, 7 and 6 cm for Switzerland, Germany and Ukraine, respectively.

 Mortality predictors
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory. As an explanatory variable, the annual relative basal area increment (relBAI) was calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area. Tree dbh in the second inventory was used in addition to relBAI to model tree status (alive or dead) of the third inventory.

To increase the generality of the mortality models, we selected environmental variables that are known to have a considerable influence on growth and mortality of beech. We emphasized the effects of water availability using a large set of drought characteristics that were calculated based on the local site water balance. We also related beech mortality to soil pH, temperature, precipitation and growing degree-days. Additionally, we considered stand characteristics that reflect the development stage, competition and structure of the forests.

 Further information
For further information, refer to Hülsmann _et al_. (2016) Does one model fit all? patterns of beech mortality in natural forests of three European regions. _Ecological Applications_.

fagus-sylvatica

display_name: fagus-sylvatica

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves

mortality-models

display_name: mortality-models

primeval-forests

display_name: primeval-forests

tree-mortality

display_name: tree-mortality

en: Data from: Does one model fit all? patterns of beech mortality in natural forests of three European regions


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: meteorological-measurements soil-moisture dischma-catchment davos meteo-station

state: active

type: dataset

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

format: SERVICE

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

education

fr: Education, science

de: Bildung, Wissenschaft

en: Education and science

it: Formazione e scienza

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: IRKIS Soil moisture measurements Davos


data-analysis-toolkits

maintainer: EnviDat Support

title_for_slug: data-analysis-toolkits

en: hypothesis-testing uncertainty statistics error-propagation bayesian-inference data-analysis

en: Toolkit 7: hypothesis testing, significance, and power

media_type: application/pdf

en: An overview of basic concepts -- and common pitfalls -- in statistical hypothesis testing, statistical significance, and power analysis

format: PDF

mimetype: application/pdf

en: Toolkit 12: weighted averages and their uncertainties

en: There are two different ways to calculate the uncertainty of a weighted average. Software packages often don't tell you which one they are reporting, and the resulting errors can be huge.

en: Toolkit 8: Hodges-Lehmann estimators

en: A quick introduction to Hodges-Lehmann estimators (nonparametric measures of effect size)

en: toolkit 6: averaging in nonlinear functions

en: The average of a nonlinear function will not equal the function evaluated at its average inputs (the mean of the function will differ from from the function of the mean). This toolkit shows how to estimate that averaging bias.

en: Toolkit 11: serial correlation

en: Tools for detecting and correcting for serial correlation in analyses of time series

en: Toolkit 10: linear regression

en: An overview of the math, logic, and pitfalls of ordinary least-squares linear regression

en: Toolkit 9: Experimentwise error rates and statistical fishing expeditions

media_type: .pdf

en: Statistical fishing expeditions, and how to avoid being misled by them

en: Toolkit 4: confidence intervals

en: Toolkit 1: graphically displaying data distributions

en: Toolkit 2: quantifying data distributions using descriptive statistics

en: Toolkit 3: tools for transforming data

en: The ladder of powers and a few other cool transformations

en: Toolkit 5: uncertainty analysis and error propagation

en: Gaussian error propagation, monte carlo methods, and first-order, second-moment error propagation

en:
These are condensed notes covering selected key points in data analysis and statistics. They were developed by James Kirchner for the course "Analysis of Environmental Data" at Berkeley in the 1990's and 2000's. They are not intended to be comprehensive, and thus are not a substitute for a good textbook or a good education!

License: These notes are released by James Kirchner under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.

bayesian-inference

display_name: bayesian-inference

data-analysis

display_name: data-analysis

error-propagation

display_name: error-propagation

hypothesis-testing

display_name: hypothesis-testing

statistics

display_name: statistics

uncertainty

display_name: uncertainty


en: qgis-plugin geodata-processing swiss-geodata raster-processing seilaplan digital-elevation-model open-source digital-planning cable-yarding geoinformation-system

en: DHM-Kacheln zusammenfügen

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. In this tutorial video, we show how to merge multiple DTM raster tiles into one file, using the QGIS tool ‘Virtual Raster’. This simplifies the digital planning of a cable line using the QGIS plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to Seilaplan website: https://seilaplan.wsl.ch

***************************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. In diesem Tutorialvideo zeigen wir, wie man mit dem QGIS-Plugin Virtuelles Raster mehrere DHM-Kacheln zu einem einzigen Rasterfile zusammenfügen und abspeichern kann. Für die Seillinienplanung mit Seilaplan muss nun nur noch eine Datei, mein neues virtuelles Raster, ausgewählt werden.

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geodata-processing

display_name: geodata-processing

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

raster-processing

display_name: raster-processing

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Seilaplan Tutorial: Merge DTM tiles


en: sdms aridity ground-temperature precipitation frost-change-velocity soil

media_type: TIFF

format: TIFF

media_type: tif

en: Mean annual temperature modified from CHELSA

en: Soil organic carbon content modified from SoilGrids

en: Frost change frequency modified from CHELSA

en: Precipitation seasonality from CHELSA

en: Soil pH modified from SoilGrids

en: Precipitation of driest quarter modified from CHELSA

en: Soil clay content modified from SoilGrids

en: Mean diurnal range modified from CHELSA

en: The dataset contains seven environmental layers (average annual temperature, aridity [annual precipitation divided by annual potential evapotranspiration], frost change frequency, precipitation in the driest quarter, mean diurnal temperature range, and precipitation seasonality) modified from CHELSA (https://chelsa-climate.org/) and three soil layers (soil organic matter content, pH water, and clay content) modified from SoilGrids (https://soilgrids.org/).

aridity

display_name: aridity

frost-change-velocity

display_name: frost-change-velocity

ground-temperature

display_name: ground-temperature

precipitation

display_name: precipitation

sdms

display_name: sdms

soil

display_name: soil

en: Environmental layers for SDM simulations (GDPlants)


maintainer: Michael Lehning

en: winter-tourism snow-farming snow terrestrial-laser-scanning snowpack snow-conservation

en: Fluela .smet

media_type: SMET

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Windtunnel and DAV.

en: HS Fluela autumn 2015

media_type: text/plain

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903
Nodata: -9999

format: TXT

mimetype: text/plain

en: Martell .sno

media_type: SNO

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Martell heap

en: HS Fluela spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903

en: HS Martell autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en: Fluela .sno

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Flüela heap

en: Martell .smet

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Hintermartell.

en: HS Martell spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en:
Two data sets obtained for snow farming projects (Fluela, Davos, CH and Martell, IT) in 2015.

The data set contains for each site:

* 10 cm GIS raster of snow depth calculated from terrestrial laserscanning surveys (TLS) in the end of winter season (April/May)

* 10 cm GIS raster of snow depth calculated from TLS in the end of summer season (October)

Input files for SNOWPACK model:

* .sno: snow profile at the end of winter

* .smet: meteorological data measured by weather stations in the area

For more details see Grünewald, T., Lehning, M., and Wolfsperger, F.: Snow farming: Conserving snow over the summer season, The Cryosphere Discuss., https://doi.org/10.5194/tc-2017-93, in review, 2017.

snow

display_name: snow

snow-conservation

display_name: snow-conservation

snow-farming

display_name: snow-farming

snowpack

display_name: snowpack

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

winter-tourism

display_name: winter-tourism

en: Snowfarming data set Davos and Martell 2015


en: snow avalanche avalanche-forecast snow-stability-evaluation snowpack

en: Stability tests

media_type: application/zip

en: Stability tests including csv-files with CT, ECT and PST experiments for each year and each field site.

format: ZIP

mimetype: application/zip

en: Extracted data

en: Extracted data contain validation and results published in Richter et al. (2019).

en: README

en: README file explaining data structure and content

en: Manually observed snow profiles

en: Manually observed snow profiles as csv-files containing depth [cm], thickness [cm], density [kg m-3], hand hardness, first grain type, second grain type, first grain size [mm], and second grain size [mm] of each layer.

en: SNOWPACK simulations

en: This dataset contains all SNOWPACK simulations, including input files, setup and output files.

en:
To validate the critical crack length as implemented in the snow cover model SNOWPACK, PST experiments were conducted for three winter seasons (2015-2017) at two field site above Davos, Switzerland. This dataset contains manually observed snow profiles and stability tests. Furthermore, corresponding SNOWPACK simulations are included.
These data were analyzed and results were published in Richter et al. (2019).

Please refer to the Readme file for further details on the data.

These data are the basis of the following publication:
Richter, B., Schweizer, J., Rotach, M. W., and van Herwijnen, A.: Validating modeled critical crack length for crack propagation in the snow cover model SNOWPACK, The Cryosphere, 13, 3353–3366, https://doi.org/10.5194/tc-13-3353-2019, 2019.

avalanche

display_name: avalanche

avalanche-forecast

display_name: avalanche-forecast

snow-stability-evaluation

display_name: snow-stability-evaluation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Validating and improving the critical crack length in SNOWPACK


maintainer: Adam Winstral

en: snow snow-simulation jules-investigation-model snow-depth jim

en: Station forcing data

en: All forcing data need to run JIM at HS and SWE stations. These are data downscaled directly from COSMO NWP data (WY14, WY15) and further enhanced by additional station observations of snow depth (HS) and air temperature (Ta) in WY17. Further information can be found in README file. Note that in WY14 and WY15, shortwave radiation was not split into direct and diffuse (not necessary for JIM) and that the default method in JIM for splitting precipitation phase was used. In WY 17, direct and diffuse were combined as input to JIM and JIM was forced with pre-processed liquid and solid precipitation phases.

en: DEM

en: 1-km resolution DEM used for downscaling gridded NWP data to stations and for distributing BDE evaluations at HS-stations to SWE-stations

en: HS and SWE observations

en: Automated (HS) and manual (SWE) data used to evaluate model simulations

en: File/data descriptor

en: These data were used to drive and evaluate Jules Investigation Model (JIM) snow simulations. The data provided are the forcing data used for the "deterministic" runs as described in Winstral et al., 2019. The bias-detecting ensemble (Winstral et al., 2019) used observed snow depths (HS) to detect biases in these deterministic simulations related to precipitation and energy inputs to JIM. Simulations that included the BDE evaluations substantially improved JIM simulations.

jim

display_name: jim

jules-investigation-model

display_name: jules-investigation-model

snow-depth

display_name: snow-depth

snow-simulation

display_name: snow-simulation

en: Meteorological data used to develop and validate the bias-detecting ensemble (BDE)


maintainer: Esther R. Frei

en: climate-change picea-abies g-tree swiss-alps stillberg treeline forest seedling-recruitment larix-decidua

en: climate data G-TREE experiment, Davos, Switzerland

en: GTREE Website

en:
 Background information
Climate change-induced range expansion of treeline populations depends on their successful recruitment, which requires dispersal of viable seeds followed by successful establishment of individual propagules. The Global Treeline Range Expansion Experiment (G-TREE) is a global initiative involving researchers from Europe, North America, Australia and New Zealand (Brown et al., 2013). At 15 alpine and Arctic treeline sites worldwide the mechanisms determining the elevational and latitudinal distribution of tree populations are studied using a standardized experimental approach. In summer 2013, a multifactorial seedling recruitment experiment has been established at the Stillberg ecological treeline research site. The aim of this experiment, is to quantify the effect of multiple abiotic and biotic drivers on emergence, survival, and growth of *Larix decidua* and *Picea abies* seedlings in replicated plots along an elevation gradient with three sites below (1930 m a.s.l.), at (2090 m a.s.l.), and above treeline (2410 m a.s.l.; Frei et al., 2018). All plots have been surveyed annually to count seedlings and to measure their total height. Additional environmental factors, such as soil temperature, have been recorded.

 Experimental design
The Stillberg research area is located in the Eastern Swiss Alps near Davos, Switzerland. The site has been used for several long-term monitoring as well as experimental studies for the last four decades. Our G-TREE experiment consists of a lowest site located in a subalpine Larch-Spruce forest (*Larici-Picetum*) dominated by *Larix decidua* and *Picea abies* (1930 m a.s.l.), a transition zone site dominated by alpine shrubs (2100 m a.s.l.), and an uppermost site in an alpine meadow with some dwarf shrubs (2390 m a.s.l.). The three experimental sites were set up following the standard protocol of the global G-TREE initiative (Brown et al., 2013). In a split-plot design, 20 plots (224 cm × 45 cm) were established at each site, which were randomly assigned to the 2 × 2 treatment combinations of the main factors seeding and scarification (i.e. seeding and scarification, seeding only, scarification only, and full control), resulting in five replications per main treatment combination. Each plot was divided into 16 split-plots (22.5 cm × 28 cm), to which treatment combinations of four additional two-level factors species (larch and spruce), provenance (low- and high-elevation), herbivore exclosure (with and without exclosure), and seeding year (2013, 2014) were randomly assigned, which resulted in a total of 960 split-plots (Details see Frei et al. 2018).

 Data description
All plots have been surveyed annually to count seedlings and to measure their total height. Seedling height was assessed with a hand ruler as the total length from the original emerging point to the apical meristem (Details see Frei et al. 2018). Additionally, soil temperature at each site, has been continuously recorded since 2013. Here, we present data from eight years (2013–2021).

climate-change

display_name: climate-change

forest

display_name: forest

g-tree

display_name: g-tree

larix-decidua

display_name: larix-decidua

picea-abies

display_name: picea-abies

seedling-recruitment

display_name: seedling-recruitment

stillberg

display_name: stillberg

swiss-alps

display_name: swiss-alps

treeline

display_name: treeline

en: G-TREE: Global Treeline Range Expansion Experiment Davos, Switzerland


maintainer: Mountain Hydrology and Mass Movements

en: debris-flow-fatalities landslide-fatalities earthquake-fatalities natural-hazard-fatalities flood-fatalities lightning-fatalities windstorm-fatalities ice-avalanche-fatalities rockfall-fatalities

media_type: CSV

en: Natural hazard fatalities per year in Swizterland since 1946.

format: CSV

mimetype: text/csv

en:
This dataset contains the number of fatalities due to flood, debris flow, landslide, rockfall, windstorm, lightning, ice avalanche, earthquake and other processes like roof avalanche or lacustrine tsunami for each year since 1946.
The following information is contained (by column and column title):

* year
* total number of hazard fatalities
* number of fatalities by flood (German: Hochwasser, Überschwemmung). Flood includes people drowned in flooded or inundated areas or carried away in streams under high-water conditions.
* number of fatalities by debris flow (German: Murgang).
* number of fatalities by landslide (German: Erdrutsch). Landslide includes people killed by landslides and hillslope debris flows (German: Hangmure).
* number of fatalities by rockfall (German: Steinschlag, Fels- und Bergsturz).
* number of fatalities by windstorm (German: Sturm). Windstorm includes people killed by falling objects or trees during very strong wind conditions and people who drowned in lakes because their boat capsized during such conditions.
* number of fatalities by lightning (German: Blitz).
* number of fatalities by ice avalanche (German: Eislawine).
* number of fatalities by earthquake (German: Erdbeben).
* number of fatalities by other processes like roof avalanche, lacustrine tsunami (German: andere Prozesse wie Dachlawine, Tsunami im See).

The data was collected based on newspaper research. For more information please refer to

_Badoux, A., Andres, N., Techel, F., and Hegg, C.: Natural hazard fatalities in Switzerland from 1946 to 2015, Nat. Hazards Earth Syst. Sci., 16, 2747-2768, https://doi.org/10.5194/nhess-16-2747-2016, 2016._

The data collection is financed by the FOEN (with exception of the collection of the avalanche fatalities). The data contains the official statistics of the FOEN on fatalities due to flood, debris flow, landslide, rock fall and avalanche.

Restrictions: The data set is not complete. Only fatalities in or around settlements and on open transportation routes are included. More precisely, fatalities were not collected, when persons exposed themselves to a great danger on purpose. Or fatalities during leisure activities which are connected to a higher risk were not included (this includes e.g. canoeing or river surfing during flood, canyoning, mountaineering, climbing, walking or driving on a closed road).

Fatalities by avalanches are collected at the WSL Institute for Snow and Avalanche Research SLF. You can download the avalanche fatalities per hydrological year [here](https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936) and per calendar year [here](https://www.envidat.ch/dataset/avalanche-fatalities-per-calendar-year-since-1936). For a direct comparison with the fatalities presented here, please download the data set with the calendar years and do not consider fatalities in the backcountry (tour) or in terrain close to ski areas (offpiste).

debris-flow-fatalities

display_name: debris-flow-fatalities

earthquake-fatalities

display_name: earthquake-fatalities

flood-fatalities

display_name: flood-fatalities

ice-avalanche-fatalities

display_name: ice-avalanche-fatalities

landslide-fatalities

display_name: landslide-fatalities

lightning-fatalities

display_name: lightning-fatalities

natural-hazard-fatalities

display_name: natural-hazard-fatalities

rockfall-fatalities

display_name: rockfall-fatalities

windstorm-fatalities

display_name: windstorm-fatalities

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Number of natural hazard fatalities per year in Switzerland since 1946


en: flora madagascar landscape-evolution endemism geology

en: Data v1.o

media_type: ZIP

en: used for paper submission only

en: Escarpment evolution drives the diversification of the Madagascar flora

en: This upload contains the data (species checklist, species range maps, time-calibrated phylogenies, topographic change, etc.) generated, analyzed, and presented in the paper .

en: Although much of the endemic biodiversity of Madagascar can be attributed to its isolation as an island in the Indian Ocean, the high rates of speciation throughout its geologic history suggest an influence of local-scale landscape dynamics. The topographic evolution of Madagascar is dominated by the formation of high-relief continental rift escarpment and we argue that the erosion and landward retreat of this topography creates habitat heterogeneity that has served as a speciation pump for the island. The highest plant richness is found along the escarpment and is characterized by steady diversification rates over the last 45 Ma. Modeled landscape evolution by escarpment retreat demonstrates opportunities for allopatric speciation by transient habitat fragmentation through multiple mechanisms, including catchment expansion, isolation of highland remnants and formation of topographic and river barriers The segregation of floral phylogenetic turnover parallel to the escarpment is consistent with these mechanisms and indicates the importance of erosion-driven landscape dynamics on speciation.

endemism

display_name: endemism

flora

display_name: flora

geology

display_name: geology

landscape-evolution

display_name: landscape-evolution

madagascar

display_name: madagascar


en: clouds ice-nucleation aerosol raclets backward-trajectories

media_type: text/csv

en: This dataset contains number concentrations of ice-nucleating particles active at -15 °C observed at Weissfluhjoch during February and March 2019, as well as complementary data (measured aerosol number concentrations and modelled total precipitation along air mass trajectories). This data formed the basis of our paper with the title “Towards parameterising atmospheric concentrations of ice-nucleating particles active at moderate supercooling”.

aerosol

display_name: aerosol

backward-trajectories

display_name: backward-trajectories

clouds

display_name: clouds

ice-nucleation

display_name: ice-nucleation

raclets

display_name: raclets

en: Ice nucleating particle concentrations active at -15 °C at Weissfluhjoch


en: ground-temperature ritigraben permos borehole permafrost

en: DATA ACCESS

media_type: URL

en: Map of PERMOS borehole network

en: PERMOS DATA POLICY

media_type: PDF

en:
_ENVIDAT NOTE: Data currently unvailable and measures are being taken to recover and restore the data files._

Processed ground temperature measurements at the Ritigraben permafrost borehole (RIT_0102) in canton Valais, Switzerland. The borehole is located at 2690 m asl on a flat site. The surface material is coarse blocks and borehole depth is 30 m. Thermistors used YSI 44006. Year of drilling 2002. This borehole is part of the Swiss Permafrost network, PERMOS (www.permos.ch). Contact phillips@slf.ch for details of processing applied.

borehole

display_name: borehole

ground-temperature

display_name: ground-temperature

permafrost

display_name: permafrost

permos

display_name: permos

ritigraben

display_name: ritigraben

en: RIT1: Processed permafrost borehole data (2690  m asl), Ritigraben, Switzerland


en: pattern-formation numerical-model python snow vapor-transport

en:
Data and code v1.0 downloaded from the git.

Running the code requires an installation of FEniCS via docker.

en:
This python code uses the Finite Element library FEniCS (via docker) to solve the one dimensional partial differential equations for heat and mass transfer in snow. The results are written in vtk format.

The dataset contains the code and the output data to reproduce the key Figure 5 from the related publication:

_Schürholt, K., Kowalski, J., Löwe, H.; Elements of future snowpack modeling - Part 1: A physical
instability arising from the non-linear coupling of transport and phase changes, The Cryosphere, 2022_

The code and potential updates can be accessed directly through git via:

https://gitlabext.wsl.ch/snow-physics/snowmodel_fenics

numerical-model

display_name: numerical-model

pattern-formation

display_name: pattern-formation

python

display_name: python

snow

display_name: snow

vapor-transport

display_name: vapor-transport

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: A numerical solver for heat and mass transport in snow based on FEniCS


en: community-energy cooperatives switzerland renewable-energy energy-cooperatives

en: Raw date (SPSS)

media_type: SAV

en: Raw data in sav. format (SPSS). For comprehension of the data and variable structure, please consult the modified questionnaire with variable names.

en: Raw data (.csv)

en: Raw data in csv. format. For comprehension of the data and variable structure, please consult the codebook and the modified questionnaire with variable names.

en: Codebook

en: Description of variable attributes and valid n

en: Questionnaire with variable names

en: Modified questionnaire with variable names for each item. Should be used together with the data files (.csv or .sav) to reconstruct the data and variable structures.

en:
 Topic of Survey
The data at hand on energy cooperatives in Switzerland were collected in 2016 as part of the project "Collective financing of renewable energy projects in Switzerland and Germany" of the National Research Programme 71 "Managing Energy Consumption". The cooperatives were surveyed on their organizational structure, their activities in electricity and heat generation, their finances, the political context and their assessments of the future.

 Survey Method
The survey was targeted at all energy cooperatives in Switzerland (this is the basic population). The Swiss Commercial Register was searched for cooperatives and specific keywords in order to determine this basic population and collect addresses. This search in May 2016 resulted in a total of 304 energy cooperatives, to which a questionnaire was sent in July 2016. A pre-test with 8 persons had been carried out before the questionnaire was sent out. The questionnaire was provided in German and French. It was sent by mail and an attached letter referred to a link for the digital version if preferred. The online version was designed with the software "Sawtooth". After three weeks, a first, and after six weeks a second reminder letter was sent to those cooperatives that had not yet completed the questionnaire. The returned hardcopy questionnaires were manually entered into the database and then combined with the electronic data from the online survey. In the course of the survey, the total population was reduced from 304 to 289: in 4 cases the survey was not deliverable, 4 cooperatives had dissolved, 6 were not actually energy cooperatives, 1 case had recently changed its legal form. With a response rate of 47%, the final data set comprises 136 responses (from 77 digital and 59 hardcopy questionnaires). However, not all 136 of the returned questionnaires were filled out completely. We checked for answers that seemed contradictory or incomprehensible. If an error could be clearly identified and the correct answer derived, the answer was adjusted, otherwise the answer was replaced by "missing data".

 Anonymization
Participating cooperatives have been assured that their information will be kept confidential and will only be made public anonymously. For this reason, the data have been anonymized in in order to prevent any identification of individual cooperatives.

 How to Use the Data
* The data are available in CSV and SPSS (sav.) format.
* A codebook and a modified version of the used questionnaire are provided to illustrate the data and variable structure. In the questionnaire, the variable names are assigned to the corresponding questions. In the codebook, further information on these variables (valid n, answer categories) can be found. This information (of the codebook) is already integrated in the SPSS file.

 Current Embargo on Data
These data are currently under embargo and will only be released when the project is completed (not before 2020).

#Additional Information
* The used questionnaire is provided in German and French.
* Descriptive results of the survey were published in a WSL report: https://www.dora.lib4ri.ch/wsl/islandora/object/wsl:18943

community-energy

display_name: community-energy

cooperatives

display_name: cooperatives

energy-cooperatives

display_name: energy-cooperatives

renewable-energy

display_name: renewable-energy

switzerland

display_name: switzerland

en: Energy Cooperatives in Switzerland: Survey Results // Energiegenossenschaften in der Schweiz: Befragungsergebnisse


en: avalanches photogrammetry snow-depth-distribution dischma snow-hydrology davos

en: Snowdepth maps

media_type: geotiff

format: GeoTIFF

en:
The available datasets are snow depth maps with a spatial resolution of 0.5 m derived from images of the survey camera Vexcel Ultracam mounted on a piloted airplane. Image acquisition was carried out during the approximately peak of winter (time when the thickest snowpack is expected) in spring. The snow depth maps are calculated by the subtraction of a summer-DTM from the processed winter- DSM of the corresponding date. The summer-DTM used was derived from a point cloud of an airborne laser scanner from 2020.

Due to the occurrence of inaccuracies of the calculated snow depth values caused by the photogrammetric method, we applied different masks to significantly increase the reliability of the snow depth maps. We masked out settled areas, high-frequented streets and technical constructions, pixels with high vegetation (height > 0.5 m) , outliers and unrealistic snow depth values. In addition, we modified the snow depth values of snow-free pixels to 0.
The information on buildings and infrastructure comes from the exactly classified ALS point cloud and the TLM dataset from Swisstopo (https://www.swisstopo.admin.ch/de/geodata/landscape/tlm3d.html#links). High vegetation is also derived from the classification and the calculated object height from the point cloud.
Outliers and unrealistic snow depth values are defined as negative snow depth values and snow depths exceeding 10 m. The classification of each pixel of the corresponding orthophoto into snow-covered or snow-free is based on the application of a threshold of the NDSI or manually determined ratios of the RGB values.

An extensive accuracy assessment proves the high accuracy of the snow depth maps with a root mean square error of 0.25 m for the year 2017 and 0.15 m for the following snow depth maps.

The work is published in:

avalanches

display_name: avalanches

davos

display_name: davos

dischma

display_name: dischma

photogrammetry

display_name: photogrammetry

snow-depth-distribution

display_name: snow-depth-distribution

snow-hydrology

display_name: snow-hydrology

en: Snow depth mapping by airplane photogrammetry (2017 -  ongoing)


photogrammetric-drone-data-schurlialp

title_for_slug: photogrammetric-drone-data-schurlialp

en: wingtra uav photogrammetry dsm orthophoto drone-data

en: Data Access

media_type: TIF

en:
- 10 cm DSM
- 10 cm HS
- 3 cm orthophoto
- original RGB images
- Agisoft Metashape Processing Report

All of the products are also available as a cloud optimized geotiff.

en: The data was collected on 16.04.2021 and on 28.05.2021 with a Wingtra Gen II and a Sony RX1 II RGB sensor to obtain snow depth and distribution data. Following the data collection, the data was processed with Agisoft Metashape. A 10cm DSM, a 10cm snow depth raster, a 3mm orthophoto and the original drone images are available for download.

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

uav

display_name: uav

wingtra

display_name: wingtra

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Photogrammetric Drone Data Schürlialp


en: elevational-gradient lichen-growthform functional-taxonomic-groups endemic-species disturbance lichen-growth-form biodiversity functional-taxonomic-group liverwort climate-change-impact bryophyte moss endemic lichen climate-change photobiont madeira-island bryophyte-life-strategy

en: MadCrypto – Bryophyte and macrolichen diversity in laurel forests of Madeira

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science.

format: XLS

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science 30: 1122–1133.

The excel file contains 5 sheets:
1) Plot information
2) Bryophyte data with species specific information, separated per substrate
3) Macrolichen data with species specific information, separated per substrate
4) Bryophyte data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 2 and 4 might therefore differ slightly.
5) Macrolichen data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 3 and 5 might therefore differ slightly.

biodiversity

display_name: biodiversity

bryophyte

display_name: bryophyte

bryophyte-life-strategy

display_name: bryophyte-life-strategy

climate-change

display_name: climate-change

climate-change-impact

display_name: climate-change-impact

disturbance

display_name: disturbance

elevational-gradient

display_name: elevational-gradient

endemic

display_name: endemic

endemic-species

display_name: endemic-species

functional-taxonomic-group

display_name: functional-taxonomic-group

functional-taxonomic-groups

display_name: functional-taxonomic-groups

lichen

display_name: lichen

lichen-growth-form

display_name: lichen-growth-form

lichen-growthform

display_name: lichen-growthform

liverwort

display_name: liverwort

madeira-island

display_name: madeira-island

moss

display_name: moss

photobiont

display_name: photobiont


maintainer: Frank Techel

en: danger-level warning-regions european-alps avalanche-forecast snow

en: Forecast avalanche danger level

en: contains the highest forecast danger level (dangerLevelMax) for each day and warning region

en: shape file warning regions Alps

en:
This dataset contains the data used in the publication by Techel et al., 2018 _Spatial consistency and bias in avalanche forecasts - a case study in the European Alps_ (Nat Haz Earth Syst Sci).
For details on the data please refer to this publication.
The dataset contains the following:
- shape files for the warning regions in the Alps
- highest forecast danger level for each warning region and day

avalanche-forecast

display_name: avalanche-forecast

danger-level

display_name: danger-level

european-alps

display_name: european-alps

snow

display_name: snow

warning-regions

display_name: warning-regions

en: Forecast avalanche danger level European Alps 2011 - 2015


en: uav gletscher glacier drone findelengletscher orthoimage griesgletscher dem alps sankt-annafirn orthophoto dsm

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 30th of August 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 15th of August 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 3rd of August 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 26th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 28th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 09th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 13th of September 2016.

en: This .pdf contains an orthoimage for each dataset as well as a Table which displays the number of flights made, image acquired, number of GCP set and the total area covered.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 21th of July 2015.

en: This folder contains all UAV flights paths that we created for the Sankt Annafirn, the Findelengletscher and Griesgletscher. They have been created with the software eMotion2, that was developped for the eBee platform from Sensefly.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 19th of April 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of July 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 22th of September 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 15th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 2nd of July 2016.

en: Bulk Data Access

en: Link to the S3 bucket where all the data resources can be downloaded in bulk

en:
 UAV-derived DSMs and orthoimages

Unmanned Aerial Vehicle (UAV) surveys were conducted between 2015 and 2016 on the Sankt Annafirn, Findelen- and Griesgletscher, situated in the Swiss Alps. Three surveys at the Sankt Annafirn allowed for a full glacier coverage, four surveys at Griesgletscher allowed an almost full glacier coverage and seven surveys at Findelengletscher allowed for a partial coverage of the glacier tongue (see individual datasets for exact extent). For each survey, a high resolution orthoimage and a Digital Surface Model (DSM) was created.

 UAV surveys:

Prior flight, Ground Control Points (GCPs) were deployed on the glacier surface and measured with a differential GPS (Trimble R7 or Leica GPS 1200). They allowed precise georeferencing of the UAV-derived datasets. UAV flight plans were planned with the software *eMotion 2* and a SenseFly eBee was used as surveying platform. The images were then processed with the software Agisoft Photoscan Pro 1.1.6 .

The location and dates of each survey can be found in the table together with the number of flights performed (Nflights), the number of acquired images (Nimages), the number of GCPs set (NGCPs) and the surveyed area.

A folder for each dataset is available (see folder name in table), which contains:

- An orthoimage *glacier_date_photoscan_oi_CH1903+_LV95_0.1m.tif*

- A Digital Surface Model *glacier_date_photoscan_dsm_CH1903+_LV95_0.1m.tif*

- The Agisoft Photoscan automatic processing report  *glacier_date_photoscan_report.pdf*

where:

- *glacier* is the name of the surveyed glacier

- *date* is the date of the UAV image acquisition

- *photoscan* is the name of the photogrammetric software

- *oi* or *dsm* the type of dataset

- *CH1903+_LV95* is the coordinate system and datum of the dataset

- *0.1m* is the resolution of the dataset in meter

- *.tif* is the extention of the dataset

Details about the UAV surveys, the image processing and the accuracy of the UAV-derived products can be found in this publication below.

Paper Citation:
 > _Gindraux et al. 2017. Accuracy Assessment of Digital Surface Models from Unmanned Aerial Vehicles’Imagery on Glaciers, Remote Sensing, 9, 186, 1-15, [doi: 10.3390/rs9020186](https://doi.org/10.3390/rs9020186)._

The folder UAV_flight_paths.zip contains all UAV flights performed on the Sankt Annafirn, Findelengletscher and Griesgletscher. The flights were planned with the software eMotion2 and have the .afp extention.

alps

display_name: alps

dem

display_name: dem

drone

display_name: drone

dsm

display_name: dsm

findelengletscher

display_name: findelengletscher

glacier

display_name: glacier

gletscher

display_name: gletscher

griesgletscher

display_name: griesgletscher

orthoimage

display_name: orthoimage

orthophoto

display_name: orthophoto

sankt-annafirn

display_name: sankt-annafirn

uav

display_name: uav

en: UAV-derived Digital Surface Models and orthoimages for three alpine glaciers


maintainer: Daniela Brito Melo

en: large-eddy-simulations mixed-grain-transport drifting-snow snow-cohesion saltation

en: LES-LSM code

en: Source code used to perform the analysis presented at the research article "Modeling snow saltation: the effect of grain size and interparticle cohesion". The source code is also available at the WSL/SLF GitLab Repository (https://gitlabext.wsl.ch/atmospheric-models/les-lsm).

en: Data in Figures

media_type: zip-compressed folder of csv

en: Simulation results presented in Figures 1 to 11 of the research article "Modeling snow saltattion: the effect of grain size and interparticle cohesion" in csv format.

en:
This dataset includes the parallel application and the main results supporting the research article "Modeling snow saltation: the effect of grain size and interparticle cohesion" published at the Journal of Geophysical Research: Atmospheres.
The code is a flow solver based on the Large Eddy Simulation (LES) technique coupled with a Lagrangian Stochastic Model (LSM). The interaction of snow particles with the bed is modeled with statistical and physically-based models for aerodynamic entrainment, rebound and splash, following the works of Groot Zwaaftink et al. (2014), Comola and Lehning (2017) and Sharma et al. (2018). This algorithm was also used by Sigmund et al. (2021) to model snow sublimation.

drifting-snow

display_name: drifting-snow

large-eddy-simulations

display_name: large-eddy-simulations

mixed-grain-transport

display_name: mixed-grain-transport

saltation

display_name: saltation

snow-cohesion

display_name: snow-cohesion

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Christoph Marty

en: water-cycle snowfall climate-change-impacts snow hydrology

en: DORA Persistent URL

en: Synthesis report chapter

media_type: application/pdf

en:
This report was prepared as one of the synthesis report chapters of the Hydro-CH2018 project of the Federal Office for the Environment (FOEN). An important feature of snow cover is the fact that its volume and duration is subject to large year-to-year fluctuations. As frozen precipitation, snow cover is nothing other than a natural water reservoir that delays precipitation to runoff and is thus of outstanding importance for the seasonal water balance in Switzerland. Over a whole year, approximately 40% (22 km3) of the annual runoff currently comes from snow melting and only 1% from glacier melting. Typically, the snow cover in the Alpine region builds up over the autumn and winter months, reaches its maximum between February and May, depending on the altitude, and dominates the runoff processes during melting in the following spring and summer months.
Due to the great dependence on minus temperatures and precipitation, the snow cover reacts sensitively to temperatures above 0° Celsius and more or less precipitation. Due to climate change and the associated warming, the proportion of precipitation that falls as snow decreases measurably. In addition to this reduction in snowfall, the warmer temperatures also cause the snow cover to melt more quickly. The decline in snowfall has so far mainly affected lower altitudes, where winter temperatures often reach positive levels.
As climate change progresses, this trend is likely to continue and above all affect higher zones. Even at higher altitudes, the snow cover will then start later, melt away earlier and is increasingly no longer permanently present. This development will also have an effect on the water bodies. Today nival regimes, i.e. regimes shaped by snow, are shifting towards pluvial regimes, i.e. regimes dominated by rain. Overall, winter runoff increases, summer runoff decreases. By the end of the century, the proportion of runoff from snowmelt will decrease throughout Switzerland, albeit to a lesser extent than the proportion from glacier melt.

climate-change-impacts

display_name: climate-change-impacts

hydrology

display_name: hydrology

snow

display_name: snow

snowfall

display_name: snowfall

water-cycle

display_name: water-cycle

en: Snow and the water cycle in a changing climate


en: shortwave-radiation outgoing longwave-radiation davos incoming

en: Processing doc

en: DATA ACCESS

en: Metadata

en: Parameter file

en:
Incoming and outgoing shortwave and longwave 2 min radiation measurements in Davos Dorf, CH.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

davos

display_name: davos

incoming

display_name: incoming

longwave-radiation

display_name: longwave-radiation

outgoing

display_name: outgoing

shortwave-radiation

display_name: shortwave-radiation

en: ASRB_DAV: Shortwave and longwave radiation measurements (2 min) in Davos Dorf


en: zurich floral-resources antwerp urban poznan plants floral-inventories angiospermae paris tartu

media_type: .csv

en: Floral units, mean number of flowers per floral unit and floral abundance of the different plants counted in quadrats in the study sites in Zurich during the four sampling periods

en: Trait values for the sampled plants

en: List of plant species sampled in the five cities (Antwerp, Paris, Poznan, Tartu and Zurich) during the different sampling perionds (four for Zurich, three for the other cities) with their frequency (oc1-oc16) within a 100 m radius

en: Data of a survey of flowering plants in 80 sites in five European cities and urban agglomerations (Antwerp, Belgium; greater Paris, France; Poznan, Poland; Tartu, Estonia; and Zurich, Switzerland) sampled between April and July 2018.

angiospermae

display_name: angiospermae

antwerp

display_name: antwerp

floral-inventories

display_name: floral-inventories

floral-resources

display_name: floral-resources

paris

display_name: paris

plants

display_name: plants

poznan

display_name: poznan

tartu

display_name: tartu

urban

display_name: urban

zurich

display_name: zurich

en: Flowering Plants (Angiospermae) in Urban Green Areas in five European Cities


en: forest-fire protection-forest bark-beetles natural-hazards protective-effect compound-events extreme-events drought

en: Conclusions and recommendations of the project (in German).

en: Factsheet summarising the key results of the study (in German).

en: Factsheet summarising the key results of the study (in Italian).

en: Case study website

media_type: HTML

en: Page of the case study on the project website. It includes figures fo all questions of the survey and additional synthesis graphs.

format: HTML

en: Description of the study site, extreme event (trigger event) and informations about the survey.

media_type: XLSX

en:
This file contains the anonymous answers to the survey for the case study in the protective forest, Val Mesolcina, GR, Switzerland within the BAFU Project "Wenn Risiken kumulieren - Analyse und Umgang mit unerwarteten Ereignissen und kombinierten Risiken".
The survey consists of two parts, based on different concepts: "top-down" and "bottom-up". Answers for both concepts are available in two different worksheets within the Excel file.

en: Factsheet summarising the methods used in this project (in German).

en: Factsheet summarising the key results of the study (in French).

en:
This dataset contains the results of a case study analysing the potential impacts of a compound meteorological extreme event on the protective forest in the Val Mesolcina. These impacts were assessed in an experts survey. 29 Experts from practice, administration and science estimated the probabilities for a loss of the protective function due to a drought-related compound extreme event based on different hazard scenarios. The experts not only assessed these probabilities but also provided estimates about the reliability of the scenarios, other socio-economic consequences and options for adaptation.
This dataset contains the following information:
- Table with all (anonymised) answers from the survey
- Factsheets summarising the results and methods in German, French and Italian
- A detailed description of the study site and survey instructions
- Link to the project website wit illustrations for each individual question of the survey

bark-beetles

display_name: bark-beetles

compound-events

display_name: compound-events

drought

display_name: drought

extreme-events

display_name: extreme-events

forest-fire

display_name: forest-fire

natural-hazards

display_name: natural-hazards

protection-forest

display_name: protection-forest

protective-effect

display_name: protective-effect

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Experts survey protective forest and combined extremes in Val Mesolcina


en: wingtra drone-data uav dsm photogrammetry

en: Data Access

en:
- DSM 10cm resolution
- Orthomosaic 3cm resolution
- Agisoft Metashape Processing Report
- original RGB images

All generated products are also available as a cloud optimized geotiff.

en: We conducted four drone flights in Davos Wolfgang Arelen, in 2020/21 and 2022 to obtain data for the generation of DSMs and orthomosaics at a high resolution. The data was processed with the Agisoft Metashape Professional Software.

drone-data

display_name: drone-data

dsm

display_name: dsm

photogrammetry

display_name: photogrammetry

uav

display_name: uav

wingtra

display_name: wingtra

en: Photogrammetric Drone Data Wolfgang Arelen


maintainer: Tessa Hegetschweiler

en: teenagers childhood forest recreational-activities adolescents

en: Dataset comments

en: The codebook to the dataset

en: Survey at schools 2017

en: The dataset of the questionnaire survey at schools in SPSS-format.

en: Questionnaire school survey

en: The questionnaire used in the survey at 8 schools aimed at teenagers in German.

en: Dataset survey at schools

en: The dataset of the questionnaire survey at schools in excel format.

en: The data results from a questionnaire survey conducted at 8 schools in the cantons Zurich, Aargau and St. Gallen. Respondents aged 13-22 years. The aim of the survey was to gain insight into teenagers' relationship to the forest, reasons for visiting or not visiting the forest and activities in the forest.

adolescents

display_name: adolescents

childhood

display_name: childhood

forest

display_name: forest

recreational-activities

display_name: recreational-activities

teenagers

display_name: teenagers

en: Factors influencing teenagers' forest visit frequency


en: spatial-information urban-region development-priorities europe strategic-plans

en: Planning intentios

en:
The present dataset is part of the report titled Gradinaru S.R., Hersperger A.M., Schmid F. (2021). Deriving Planning Intentions from written planning documents. Report on CONCUR Project- From plans to land change: how strategic spatial planning contributes to the development of urban regions.
The data corresponds to the data collected as part of the DPI Method for deriving all PIs contained in a plan (open coding) as detailed in section 4 of the report. The method involved reading the plans to break down of information in meaningful discrete “incidents” or planning intentions. To identify the planning intentions, the starting points were represented by a) the structuring of the plans in chapters and sub chapters and b) the themes that the plans addressed. Thus, the collected information was not grouped according to pre-defined categories of planning intentions, but rather put together as a list of intentions as revealed by each plan. As a result, we provide, for each case study, a document (named [Urban region name] PI as defined in the plan) which contains:
	Date when the information was filled in.
	Name of the urban region and analysed strategic spatial plan .
	A list of all planning intentions contained in a plan, with each PI being addresses as follows:
	Name of PI as it appears in the plan
	Translated name of the PI (i.e. short name for easy understanding of the meaning)
	Explanation regarding the meaning of the PI
	Why the PI is considered a priority for the urban region
	Spatial information on the PI (text and cartographic representations).
In total, 14 documents are available, one for each case study. Documents contain up to 20 pages of information extracted from the plans together with explanations and notes taken during plan reading.

development-priorities

display_name: development-priorities

europe

display_name: europe

spatial-information

display_name: spatial-information

strategic-plans

display_name: strategic-plans

urban-region

display_name: urban-region

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Planning intentions in strategic plans of European urban regions


maintainer: Ana Beatriz Pierri Daunt

en: ecosystem-services literature-review multifunctionality sense-of-place pdfsearch decision-making landscape-planning resilience planning landscape-ecology socio-ecological-system landscape-services green-infrastructure landscape-perception

en: 6. Protocol

en: 1. Frequency of early concepts.

en: 2. Frequency of additional concepts.

en: 4. Use of any additional concept.

en: 3. Use of any early concept.

en: 5. Planning steps.

en:
Table of content: 1. Frequency of early concepts; 2. Frequency of additional concepts; 3. Use of any early concept; 4. Use of any additional concept, 5. Planning steps; 6. Protocol.

The present dataset is part of the published scientific paper entitled “Landscape ecological concepts in planning: review of recent developments” (Hersperger et al., 2021). The goal of this research was to review recent publications to assess the use of landscape ecological concepts in planning. Specifically, we address the following research questions: Q1. Landscape ecological concepts: What are they? How frequently are they mentioned in current research? Q2. How are landscape ecological concepts integrated in landscape planning?

We analysed all empirical and overview papers that have been published in four key academic journals in the field of landscape ecology and landscape planning in the years 2015–2019 (n = 1918). Four key journals in the field of landscape ecology were selected to conduct the analysis, respectively Landscape Ecology (LE), Landscape Online (LO), Current Landscape Ecology Reports (CLER), and Landscape and Urban Planning (LUP). The title, abstract and keywords of all papers were read in order to identify landscape ecological concepts. Then, all 1918 papers went through a keyword search to identify the use of early and additional concepts. We used the “pdfsearch” package in R programming language and searched for singular and plural forms and different variations of the concepts (see Supplementary material 1, Table A). As a result, we provided four outputs:

  1. Frequency of early concepts. This data provides the total number of times each article used each early concept (Q1). This data was used to produce the Figure 2a at the original publication.

  2. Frequency of additional concepts. This data provides the total number of times each article used each additional concept (Q1). This data was used to produce the Figure 2b at the original publication.

  3. Use of any early concept. This data provides the total number of times each article used any early concept (Q1).
This data was used to produce the Figure 3a at the original publication.

  4. Use of any additional concept. This data provides the total number of times each article used any additional concept (Q1). This data was used to produce the Figure 3b at the original publication.

To address the second question (Q2), the title, abstract and keywords of the papers included in our sample (n=1918 articles) were screened to identify papers that might show how landscape ecological concepts are integrated into planning. We selected 52 empirical papers (see Supplementary material – 4 Integration of landscape ecological concepts into planning), and we provided two outputs:

  5. Planning steps. This data provides the number of times landscape ecological concepts were addressed in each
planning steps in 52 empirical papers analysed in detail (Q2). This data was used to produce the Figure 4 at the
original publication.

  6. Protocol for assessing the integration of landscape ecological concepts into planning. To systematically collect the
data, we used this protocol which addressed the following questions: (a) which type of planning is addressed by the
paper? (b) to which planning level does the paper refer to? (c) which concepts are integrated in any of the planning
steps described above?

decision-making

display_name: decision-making

ecosystem-services

display_name: ecosystem-services

green-infrastructure

display_name: green-infrastructure

landscape-ecology

display_name: landscape-ecology

landscape-perception

display_name: landscape-perception

landscape-planning

display_name: landscape-planning

landscape-services

display_name: landscape-services

literature-review

display_name: literature-review

multifunctionality

display_name: multifunctionality

pdfsearch

display_name: pdfsearch

planning

display_name: planning

resilience

display_name: resilience

sense-of-place

display_name: sense-of-place

socio-ecological-system

display_name: socio-ecological-system

en: The usage of landscape ecological concepts in the planning literature


lwf-tea-bag-sites

maintainer: Marcus Schaub

title_for_slug: lwf-tea-bag-sites

en: roiboos tea-bag green-tea decomposition forest litter carbon verification modeling

en: Site Information

en: Descriptive information on sites

en:
Decomposition of plant litter is a key process for the transfer of carbon and nutrients in ecosystems. Carbon contained in the decaying biomass is released to the atmosphere as respired CO2, and may contribute to global warming. Litterbag studies have been used to improve our knowledge of the drivers of litter decomposition, but they lack comparability because litter quality is plant species-specific. The use of commercial tea bags as a standard substrate was suggested in order to harmonize studies, where green tea and rooibos represent more labile and more recalcitrant C compounds as surrogates of local litter.
The tea bag approach was implemented on eight sites of the Swiss long-term Forest Ecosystem Research (LWF) network (https://www.wsl.ch/LWF). This allowed us to take advantage from the existing infrastructure and data from a previous litterbag study with local litter. In Beatenberg and Schaenis, additional elevation transects were established (1200-1800 m and 540-1150 m, respectively) to examine particularly the effect of temperature on decomposition. In Pfynwald (https://www.wsl.ch/de/ueber-die-wsl/versuchsanlagen-und-labors/flaechen-im-wald/pfynwald.html) and Salgesch, infrastructure of running projects was used to examine the effect of drought and understory removal, respectively. In Novaggio, tea bags were incubated in summer and winter to study the effect of seasonality particularly precipitation. Tea bags are collected after 3, 12, 24, and 36 months; for the two time-shifted experiments additionally after 6 and 9 months.
The study has two primary objectives. Firstly, it contributes to TeaComposition initiative (http://teacomposition.org/) which aims at investigating long-term litter decomposition and its key drivers at present as well as under different future climate scenarios using a common protocol and standard litter (tea) across nine terrestrial biomes. Secondly, the data are used to further develop decomposition models such as Yasso (http://en.ilmatieteenlaitos.fi/yasso) which is used by several countries, including Switzerland to estimate the annual carbon fluxes in dead wood, litter, and soil for reporting in National Greenhouse Gas Inventories under the United Nations Framework Convention on Climate Change and the Kyoto Protocol.

carbon

display_name: carbon

decomposition

display_name: decomposition

forest

display_name: forest

green-tea

display_name: green-tea

litter

display_name: litter

modeling

display_name: modeling

roiboos

display_name: roiboos

tea-bag

display_name: tea-bag

verification

display_name: verification

en: LWF-Tea bag sites


en: consistent aws cryowrf antarctica python

media_type: .zip

en: Scripts to preprocess (and download for some databases) atmospheric weather station data. Furthermore, a list of stations and a map can be created to have an overview.

en:
There are many sources providing atmospheric weather station data for the Antarctic continent. However, variable naming, timestamps and data types are highly variable between the different sources. The published python code intends to make processing of different AWS sources from Antarctica easier. For all datasets that are taken into account variables are renamed in a consistent way. Data from different sources can then be handled in one consistent python dictionary.

The following data sources are taken into account:

* AAD: Australian Antarctic Division (https://data.aad.gov.au/aws)
* ACECRC: Antarctic Climate and Ecosystems Cooperative Research Centre by the Australian Antarctic Division
* AMRC: Antarctic Meteorological Research Center (ftp://amrc.ssec.wisc.edu/pub/aws/q1h/)
* BAS: British Antarctic Survey (ftp://ftp.bas.ac.uk/src/ANTARCTIC_METEOROLOGICAL_DATA/AWS/; https://legacy.bas.ac.uk/met/READER/ANTARCTIC_METEOROLOGICAL_DATA/)
* CLIMANTARTIDE: Antarctic Meteo-Climatological Observatory by the italian National Programme of Antarctic Research (https://www.climantartide.it/dataaccess/index.php?lang=en)
* IMAU: Institute for Marine and Atmospheric research Utrecht (Lazzara et al., 2012), https://www.projects.science.uu.nl/iceclimate/aws/antarctica.ph
* JMA: Japan Meteorological Agency (https://www.data.jma.go.jp/antarctic/datareport/index-e.html)
* NOAA: National Oceanic and Atmospheric Administration (https://gml.noaa.gov/aftp/data/meteorology/in-situ/spo/)
* Other/AWS_PE: Princess Elisabeth (PE), KU Leuven, Prof. N. van Lipzig, personal communication
* Other/DDU_transect: Stations D-17 and D-47 (in transect between Dumont d’Urville and Dome C, Amory, 2020)
* PANGAEA: World Data Center (e.g. König-Langlo, 2012)

Important notes

* Information about data sources is available. Some downloading scripts are included in the provided code. However, users should make sure to comply with the data providers terms and conditions.
* Given changing download options of the differnent institutions the above links may not permanently work and data has to be retrieved by the user of this dataset.
* No quality control is applied in the provided preprocessing software - quality control is up to the user of the datasets. Some dataset are quality controlled by the owner.

Acknowledgements
--------------------------
We thank all the data providers for making the data publicly available or providing them upon request. Full acknowledgements can be found in Gerber et al., submitted.

References
---------------
Amory, C. (2020). “Drifting-snow statistics from multiple-year autonomous measurements in Adélie Land, East
Antarctica”. The Cryosphere, 1713–1725. doi: 10.5194/tc-14-1713-2020

Gerber, F., Sharma, V. and Lehning, M.: CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB, JGR - Atmospheres, submitted.

König-Langlo, G. (2012). “Continuous meteorological observations at Neumayer station (2011-01)”. Alfred Wegener
Institute, Helmholtz Centre for Polar and Marine Research, Bremerhaven, PANGAEA, doi: 10.1594/PANGAEA.
775173

antarctica

display_name: antarctica

aws

display_name: aws

consistent

display_name: consistent

cryowrf

display_name: cryowrf

python

display_name: python

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Preprocessing Antarctic Weather Station (AWS) data in python


en: elevation-gradient beta-diversity resource-availability community-indices urbanization biodiversity anthophila hymenoptera predictive-modelling functional-diversity switzerland protected-areas climate wild-bee

en: Variable importance, model evaluation, partial dependence plots

media_type: .txt

en: The compress file containes a set of txt files with the variable importance, the model evaluation metrics and the partial dependence plots of each of the responses used (alpha and beta taxonomic and functional diversity metrics; community weighted means of 8 functional traits)

en: Elevation and waterbodies

en: Zip file containing two rasters: the digital elevation model of Switzerland and the waterbodies of Switzerland.

en: Taxonomic and functional metrics in the community plots

en:
Response data used for the modeling.
Lat: latitude community plot
Lon: longitude community plot
Richness: species richness
Shannon: Shannon diversity index
FDis: functional dispersion
TOP: Trait Onion Peeling (functional richness)
TED: Trait Even Distribution (functional evenness)
LCBD_taxo: local community contributions to taxonomic beta diversity
LCBD_fun: local community contributions to functional beta diversity
ITD: community weighted means inter-tegula distance
feeding_specialization: community weighted means feeding specialization
tong_length: community weighted means tongue length
phenostart: community weighted means start of the phenology
phenoduration: community weighted means duration of the phenoloy
cleptoparasite: community weighted means cleptoparasites
belowgound: community weighted means proportion belowground
solitary: community weighted means proportion solitary

en: Protected areas

media_type: .tiff

en: Protected areas considered, divided in three groups and rasters: protected areas sensu stricto, protected areas sensu lato and all protected areas

en: Spatial environmental predictors and responses

en:
The .zip file contains the rasters of the environmental predictors and the predicted responses:
-  **Environmental predictors.**:

  -  The raster on the climate contains the PCA axes on the CHELSA variables.

  -  The raster on resource availability contains the PCA axes on plant communities

  -  The raster on land-use contains the land-use composition at 2500 m.

  -  The raster on beekeeping intensity contains thedensity of hives within 2500 m

-  **Responses**:
- The predicted responses without masking the waterbodies (Diversity_stack_revised_Selected_descriptors.tif).
- The predicted responses masking the waterbodies (masked.stack.all.diversity.tiff).

en: Wild bee trait data

en: Text file containing the scores of the 8 used traits. The data originates from the European trait database (compiler: Stuart Roberts; pollinator loss module of the EU- FP6 ALARM project).

en: Deprecated-Predictors

en:
The compress file includes the rster files of the predictors used in the analyses, including the climate, resource availability, land-use and beekeeping intensity metrics.

The raster on the climate contains the PCA axes on the CHELSA variables.
The raster on resource availability contains the PCA axes on plant communities
The raster on land-use contains the land-use composition at 2500 m.
The raster on beekeeping intensity contains thedensity of hives within 2500 m

en:
Raw data supporting the paper "Countrywide wild bee taxonomic and functional diversity reveal a spatial mismatch between alpha and beta-diversity facets across multiple ecological gradients". It contains taxonomic and functional metrics in 3343 community-plots distributed across Switzerland. The calculated metrics are:
- Alpha taxonomic community metrics: species richness and Shannon diversity
- Alpha functional community metrics: Functional richness (using the Trait Onion Peeling index, TOP), functional eveness (using the Trait Even Distribution index, TED) and the functional dispersion.
- Community weighted means of 8 functional traits
- The local community contributions on the functional and taxonomic beta diversity (LCBD).

The dataset also includes the following:
- The used predictors to model the spatial distribution of the community metrics (climate PCA, vegetation PCA, land-use metrics, beekeeping intensity).
-The three types of protected areas, defined according to the protective measures.
- The model evaluation, variable importance and partial dependece data.

anthophila

display_name: anthophila

beta-diversity

display_name: beta-diversity

biodiversity

display_name: biodiversity

climate

display_name: climate

community-indices

display_name: community-indices

elevation-gradient

display_name: elevation-gradient

functional-diversity

display_name: functional-diversity

hymenoptera

display_name: hymenoptera

predictive-modelling

display_name: predictive-modelling

protected-areas

display_name: protected-areas

resource-availability

display_name: resource-availability

switzerland

display_name: switzerland

urbanization

display_name: urbanization

wild-bee

display_name: wild-bee

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data on wild bee taxonomic and functional diversity in Switzerland


en: cosmo-wrf meteoswiss complex-terrain numerical-simulation high-resolution

en: StaticData

media_type: application/zip

en:
Scripts to process geographical/static data (see Section 3 in COSMOWRFdocumentation.pdf).
- ascii_to_bin_landuse.f90
- ascii_to_bin_soiltype.f90
- ascii_to_bin_topo_wgs84_ws2sf1.f90
- see_slopes.ncl
- soiltype_writing.py
- toposmooth_wgs84_cosmobound.ncl
- write_geogrid.o

en: WPSSetup

en: Scripts that need to be changed to compile WPS (see COSMOWRFdocumentation.pdf, Section 4)

en: WPSrun

en: Scripts to run the WRF pre-processing (WPS) for COSMO-WRF simulation (see Section 5 in COSMOWRFdocumentation.pdf)

en: MeteorologicalData

en: Scripts to process meteorological data (see Section 2 in COSMOWRFdocumentation.pdf).

en: COSMO-WRF documentation v1.0

en:
Gerber, Franziska; Sharma, Varun (2018). Running COSMO-WRF on very-high resolution over complex terrain. EnviDat. doi:10.16904/envidat.35

Documentation about the procedure to run COSMO-WRF

en: WRFrun

en: Scripts to run COSMO-WRF simulation (see Section 6 in COSMOWRFdocumentation.pdf)

en: Postprocessing

en: Postprocessing scripts to map WRF output on swiss coordinates (see Section 7 in COSMOWRFdocumentation.pdf)

en: This is a technical documentation of the procedure to run the Weather Research and Forecasting (WRF) model over complex alpine terrain using Consortium for Small-Scale Modeling (COSMO) reanalysis by the Federal Office of Meteorology and Climatology (MeteoSwiss) as initial and boundary conditions (COMSO-WRF). The setup is adapted for very high resolution simulations based on COSMO-2 (2.2 km resolution) reanalysis. This document gives an overview over steps to setup COSMO-WRF and adaptations needed to run COSMO-WRF. Additionally, the calculation of precipitation rate at a horizontal plane and remapping COSMO-WRF output on Swiss coordinates are documented.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

high-resolution

display_name: high-resolution

meteoswiss

display_name: meteoswiss

numerical-simulation

display_name: numerical-simulation

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal


en: orography air-temperature glaciers paleo-climate precipitation last-glacial-maximum

en: Data Access via S3

en:
High resolution, downscaled climate model data are used in a wide variety of applications in environmental sciences. Here we present the CHELSA-TraCE21k downscaling algorithm to create global monthly climatologies for temperature and precipitation at 30 arcsec spatial resolution in 100 year time steps for the last 21,000 years. Paleo orography at high spatial resolution and at each timestep is created by combining high resolution information on glacial cover from current and Last Glacial Maximum (LGM) glacier databases with the interpolation of a dynamic ice sheet model (ICE6G) and a coupling to mean annual temperatures from CCSM3-TraCE21k. Based on the reconstructed paleo orography, mean annual temperature and precipitation was downscaled using the CHELSA V1.2 algorithm.

The data is published under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

en: Technical documentation

media_type: .pdf

en: Technical documentation containing file metadata and variable descriptions.

air-temperature

display_name: air-temperature

glaciers

display_name: glaciers

last-glacial-maximum

display_name: last-glacial-maximum

orography

display_name: orography

paleo-climate

display_name: paleo-climate

precipitation

display_name: precipitation

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: CHELSA-TraCE21k: Downscaled transient temperature and precipitation data since the last glacial maximum


maintainer: Jana von Freyberg

en: snowpack-outflow snowmelt-lysimeter solutes stable-water-isotopes snowmelt-rate

en: The dataset contains volumes, solutes and stable water isotopes of snowpack outflow at daily resolution. 10-minute data are provided of the measurements taken by three snowmelt lysimeter systems at spatially-distributed locations.

en:
This data contain volumes, solutes and isotopes of snowpack outflow measured by a snowmelt lysimeter system at three locations in the southern Alp catchment, situated Central Switzerland. The river Alp is a snow-dominated catchment situated in Central Switzerland characterized by an elevation range from 840 to 1898 m a.s.l.
The dataset provides solutes (major anions and cations, trace metals) and stable water isotopes and water fluxes (snowpack outflow volumes) at daily intervals from several sampling locations. Additionally, the data measured by the snowmelt lysimeter system are provided in 10-minute resolution.

snowmelt-lysimeter

display_name: snowmelt-lysimeter

snowmelt-rate

display_name: snowmelt-rate

snowpack-outflow

display_name: snowpack-outflow

solutes

display_name: solutes

stable-water-isotopes

display_name: stable-water-isotopes

en: Daily data of the volumes, solutes and isotopes in snowpack outflow measured at three locations in the southern Alp catchment


en: ecoregions taxonomy filtering occurrence-records conservation hard-limit accepted-name r-package landsca flags species-distribution synonyms species-observations gbif large-scale range-maps

en: gbif.range R package version 0.2 (deprecated)

media_type: ZIP

en: gbif.range R package version 1.1 (current)

en: wsl.gbif R package version 0.1 (deprecated)

en: Test version, not to be used.

en: GitHub URL

media_type: R

en: Although species range may be obtained using expert maps or modeling methods, expert data is often species-limited and statistical models need more technical expertise as well as many species observations. When unavailable, such information may be extracted from the Global Biodiversity Information facility (GBIF), the largest public data repository inventorying georeferenced species observations worldwide. However, retrieving GBIF records at large scale may be tedious if users are unaware of specific tools and functions that need to be employed. Here we present *gbif.range*, an R library that contains automated methods to generate species range maps from scratch using in-house ecoregions shapefiles and an easy-to-use GBIF download wrapper. Finally, this library also offers a set of additional very useful parameters and functions for large GBIF datasets (generate doi, extract GBIF taxonomy, records filtering...). [gbif.range R project](https://github.com/8Ginette8/gbif.range)

accepted-name

display_name: accepted-name

conservation

display_name: conservation

ecoregions

display_name: ecoregions

filtering

display_name: filtering

flags

display_name: flags

gbif

display_name: gbif

hard-limit

display_name: hard-limit

landsca

display_name: landsca

large-scale

display_name: large-scale

occurrence-records

display_name: occurrence-records

r-package

display_name: r-package

range-maps

display_name: range-maps

species-distribution

display_name: species-distribution

species-observations

display_name: species-observations

synonyms

display_name: synonyms

taxonomy

display_name: taxonomy

en: gbif.range - An R package to generate species range maps based on ecoregions and a user-friendly GBIF wrapper


en: digital-planning swiss-geo-downloader seilaplan qgis-plugin geoinformation-system swiss-geodata cable-yarding digital-elevation-model open-source

en: Herunterladen des DHM mit SwissGeoDownloader

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. The plugin ‘Swiss Geo Downloader’, which is available for the open source geoinformation software QGIS, allows freely available Swiss geodata to be downloaded and displayed directly within QGIS. It was developed in 2021 by Patricia Moll in collaboration with the Swiss Federal Institute for Forest, Snow and Landscape Research WSL. In this tutorial we describe how to download the high accuracy elevation model ‘swissALTI3D’ with the help of the ‘Swiss Geo Downloader’ and how to use it for digital planning of a cable line with the plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to the Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link to Seilaplan website: https://seilaplan.wsl.ch

*********************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Das Plugin Swiss Geo Downloader, welches für das Open Source Geoinformationssystem QGIS zur Verfügung steht, ermöglicht frei verfügbare Schweizer Geodaten direkt innerhalb von QGIS herunterzuladen und anzuzeigen. Es wurde 2021 von Patricia Moll in Zusammenarbeit mit der eidgenössischen Forschungsanstalt Wald, Schnee und Landschaft WSL entwickelt. In diesem Tutorial beschreiben wir, wie man mit Hilfe des Swiss Geo Downloaders das hochgenaue Höhenmodell swissALTI3D herunterladen und für die Seillinienplanung mit dem Plugin Seilaplan verwenden kann.

Link zum Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link zur Seilaplan-Webseite: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geo-downloader

display_name: swiss-geo-downloader

swiss-geodata

display_name: swiss-geodata

education

en: Education and science

envidat

en: EnviDat: the Environmental Data Portal

en: Seilaplan Tutorial: DTM download with SwissGeoDownloader


envidat-supports-open-science

maintainer: Ionut Iosifescu Enescu

title_for_slug: envidat-supports-open-science

en: open-science juypter-notebooks envidat wsl research-data-management

en: Article as PDF

en:
The article "EnviDat Supports Open Science" originally appeared in WSLintern No. 3 (2020), page 14-15 and it is republished here with permission from the WSLintern editorial team. It contains guidelines for WSL scientists about the main issues behind Open Science and how to pragmatically approach the complexities of doing Open Science with EnviDat’s support.

License: This article is released by WSL and the EnviDat team to the public domain under a Creative Commons 4.0 CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

display_name: envidat

juypter-notebooks

display_name: juypter-notebooks

open-science

display_name: open-science

research-data-management

display_name: research-data-management

wsl

display_name: wsl

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat Supports Open Science


present-weather-sensor-klosters

maintainer: Maxime Hervo

title_for_slug: present-weather-sensor-klosters

en: weather sensor precipitation raclets visibility

en: Present Weather Sensor Klosters

media_type: mat

en: Present Weather sensor measuring visibility and weather type installed at Klosters.

en: A present weather sensor (Vaisala PWD22) was deployed in Klosters (LON: 9.880413, LAT: 46.869019) for weather observation, combining the functions of a forwardscatter visibility meter and a present weather sensor. Besides measuring ambient light, it detects the intensity as well as the amount of both liquid and solid precipitation. More information can be found in the [User's Manual](ftp://ftp.cmdl.noaa.gov/aerosol/doc/manuals/PWD22_Manual.pdf).

precipitation

display_name: precipitation

raclets

display_name: raclets

sensor

display_name: sensor

visibility

display_name: visibility

weather

display_name: weather