en: forest-fire protection-forest bark-beetles natural-hazards protective-effect compound-events extreme-events drought

en: Experts survey protective forest and combined extremes in Val Mesolcina

en: Conclusions and recommendations of the project (in German).

en: Factsheet summarising the key results of the study (in German).

en: Factsheet summarising the key results of the study (in Italian).

en: Case study website

media_type: HTML

en: Page of the case study on the project website. It includes figures fo all questions of the survey and additional synthesis graphs.

en: Description of the study site, extreme event (trigger event) and informations about the survey.

en:
This file contains the anonymous answers to the survey for the case study in the protective forest, Val Mesolcina, GR, Switzerland within the BAFU Project "Wenn Risiken kumulieren - Analyse und Umgang mit unerwarteten Ereignissen und kombinierten Risiken".
The survey consists of two parts, based on different concepts: "top-down" and "bottom-up". Answers for both concepts are available in two different worksheets within the Excel file.

en: Factsheet summarising the methods used in this project (in German).

en: Factsheet summarising the key results of the study (in French).

en:
This dataset contains the results of a case study analysing the potential impacts of a compound meteorological extreme event on the protective forest in the Val Mesolcina. These impacts were assessed in an experts survey. 29 Experts from practice, administration and science estimated the probabilities for a loss of the protective function due to a drought-related compound extreme event based on different hazard scenarios. The experts not only assessed these probabilities but also provided estimates about the reliability of the scenarios, other socio-economic consequences and options for adaptation.
This dataset contains the following information:
- Table with all (anonymised) answers from the survey
- Factsheets summarising the results and methods in German, French and Italian
- A detailed description of the study site and survey instructions
- Link to the project website wit illustrations for each individual question of the survey

bark-beetles

display_name: bark-beetles

compound-events

display_name: compound-events

drought

display_name: drought

extreme-events

display_name: extreme-events

forest-fire

display_name: forest-fire

natural-hazards

display_name: natural-hazards

protection-forest

display_name: protection-forest

protective-effect

display_name: protective-effect

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: EnviDat Support

en: clouds ice-nucleation aerosol raclets backward-trajectories

en: Ice nucleating particle concentrations active at -15 °C at Weissfluhjoch

state: active

type: dataset

media_type: text/csv

format: CSV

mimetype: text/csv

en: This dataset contains number concentrations of ice-nucleating particles active at -15 °C observed at Weissfluhjoch during February and March 2019, as well as complementary data (measured aerosol number concentrations and modelled total precipitation along air mass trajectories). This data formed the basis of our paper with the title “Towards parameterising atmospheric concentrations of ice-nucleating particles active at moderate supercooling”.

aerosol

display_name: aerosol

backward-trajectories

display_name: backward-trajectories

clouds

display_name: clouds

ice-nucleation

display_name: ice-nucleation

raclets

display_name: raclets

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

value: Envidat Harvester

key: uri


maintainer: Irmi Seidl

en: community-energy cooperatives switzerland renewable-energy energy-cooperatives

en: Energy Cooperatives in Switzerland: Survey Results // Energiegenossenschaften in der Schweiz: Befragungsergebnisse

en: Raw date (SPSS)

media_type: SAV

en: Raw data in sav. format (SPSS). For comprehension of the data and variable structure, please consult the modified questionnaire with variable names.

format: SERVICE

en: Raw data (.csv)

media_type: CSV

en: Raw data in csv. format. For comprehension of the data and variable structure, please consult the codebook and the modified questionnaire with variable names.

en: Codebook

media_type: PDF

en: Description of variable attributes and valid n

format: PDF

mimetype: application/pdf

en: Questionnaire with variable names

en: Modified questionnaire with variable names for each item. Should be used together with the data files (.csv or .sav) to reconstruct the data and variable structures.

en:
 Topic of Survey
The data at hand on energy cooperatives in Switzerland were collected in 2016 as part of the project "Collective financing of renewable energy projects in Switzerland and Germany" of the National Research Programme 71 "Managing Energy Consumption". The cooperatives were surveyed on their organizational structure, their activities in electricity and heat generation, their finances, the political context and their assessments of the future.

 Survey Method
The survey was targeted at all energy cooperatives in Switzerland (this is the basic population). The Swiss Commercial Register was searched for cooperatives and specific keywords in order to determine this basic population and collect addresses. This search in May 2016 resulted in a total of 304 energy cooperatives, to which a questionnaire was sent in July 2016. A pre-test with 8 persons had been carried out before the questionnaire was sent out. The questionnaire was provided in German and French. It was sent by mail and an attached letter referred to a link for the digital version if preferred. The online version was designed with the software "Sawtooth". After three weeks, a first, and after six weeks a second reminder letter was sent to those cooperatives that had not yet completed the questionnaire. The returned hardcopy questionnaires were manually entered into the database and then combined with the electronic data from the online survey. In the course of the survey, the total population was reduced from 304 to 289: in 4 cases the survey was not deliverable, 4 cooperatives had dissolved, 6 were not actually energy cooperatives, 1 case had recently changed its legal form. With a response rate of 47%, the final data set comprises 136 responses (from 77 digital and 59 hardcopy questionnaires). However, not all 136 of the returned questionnaires were filled out completely. We checked for answers that seemed contradictory or incomprehensible. If an error could be clearly identified and the correct answer derived, the answer was adjusted, otherwise the answer was replaced by "missing data".

 Anonymization
Participating cooperatives have been assured that their information will be kept confidential and will only be made public anonymously. For this reason, the data have been anonymized in in order to prevent any identification of individual cooperatives.

 How to Use the Data
* The data are available in CSV and SPSS (sav.) format.
* A codebook and a modified version of the used questionnaire are provided to illustrate the data and variable structure. In the questionnaire, the variable names are assigned to the corresponding questions. In the codebook, further information on these variables (valid n, answer categories) can be found. This information (of the codebook) is already integrated in the SPSS file.

 Current Embargo on Data
These data are currently under embargo and will only be released when the project is completed (not before 2020).

#Additional Information
* The used questionnaire is provided in German and French.
* Descriptive results of the survey were published in a WSL report: https://www.dora.lib4ri.ch/wsl/islandora/object/wsl:18943

community-energy

display_name: community-energy

cooperatives

display_name: cooperatives

energy-cooperatives

display_name: energy-cooperatives

renewable-energy

display_name: renewable-energy

switzerland

display_name: switzerland


en: ground-temperature ritigraben permos borehole permafrost

en: RIT1: Processed permafrost borehole data (2690  m asl), Ritigraben, Switzerland

en: DATA ACCESS

media_type: URL

en: Map of PERMOS borehole network

en: PERMOS DATA POLICY

en:
_ENVIDAT NOTE: Data currently unvailable and measures are being taken to recover and restore the data files._

Processed ground temperature measurements at the Ritigraben permafrost borehole (RIT_0102) in canton Valais, Switzerland. The borehole is located at 2690 m asl on a flat site. The surface material is coarse blocks and borehole depth is 30 m. Thermistors used YSI 44006. Year of drilling 2002. This borehole is part of the Swiss Permafrost network, PERMOS (www.permos.ch). Contact phillips@slf.ch for details of processing applied.

borehole

display_name: borehole

ground-temperature

display_name: ground-temperature

permafrost

display_name: permafrost

permos

display_name: permos

ritigraben

display_name: ritigraben

envidat

en: EnviDat: the Environmental Data Portal


en: flora madagascar landscape-evolution endemism geology

en: Escarpment evolution drives the diversification of the Madagascar flora

en: Data v1.o

media_type: ZIP

en: used for paper submission only

format: ZIP

media_type: application/zip

en: This upload contains the data (species checklist, species range maps, time-calibrated phylogenies, topographic change, etc.) generated, analyzed, and presented in the paper .

mimetype: application/zip

en: Although much of the endemic biodiversity of Madagascar can be attributed to its isolation as an island in the Indian Ocean, the high rates of speciation throughout its geologic history suggest an influence of local-scale landscape dynamics. The topographic evolution of Madagascar is dominated by the formation of high-relief continental rift escarpment and we argue that the erosion and landward retreat of this topography creates habitat heterogeneity that has served as a speciation pump for the island. The highest plant richness is found along the escarpment and is characterized by steady diversification rates over the last 45 Ma. Modeled landscape evolution by escarpment retreat demonstrates opportunities for allopatric speciation by transient habitat fragmentation through multiple mechanisms, including catchment expansion, isolation of highland remnants and formation of topographic and river barriers The segregation of floral phylogenetic turnover parallel to the escarpment is consistent with these mechanisms and indicates the importance of erosion-driven landscape dynamics on speciation.

endemism

display_name: endemism

flora

display_name: flora

geology

display_name: geology

landscape-evolution

display_name: landscape-evolution

madagascar

display_name: madagascar

educ

en: Education, culture and sport

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Mountain Hydrology and Mass Movements

en: debris-flow-fatalities landslide-fatalities earthquake-fatalities natural-hazard-fatalities flood-fatalities lightning-fatalities windstorm-fatalities ice-avalanche-fatalities rockfall-fatalities

en: Number of natural hazard fatalities per year in Switzerland since 1946

en: Natural hazard fatalities per year in Swizterland since 1946.

en:
This dataset contains the number of fatalities due to flood, debris flow, landslide, rockfall, windstorm, lightning, ice avalanche, earthquake and other processes like roof avalanche or lacustrine tsunami for each year since 1946.
The following information is contained (by column and column title):

* year
* total number of hazard fatalities
* number of fatalities by flood (German: Hochwasser, Überschwemmung). Flood includes people drowned in flooded or inundated areas or carried away in streams under high-water conditions.
* number of fatalities by debris flow (German: Murgang).
* number of fatalities by landslide (German: Erdrutsch). Landslide includes people killed by landslides and hillslope debris flows (German: Hangmure).
* number of fatalities by rockfall (German: Steinschlag, Fels- und Bergsturz).
* number of fatalities by windstorm (German: Sturm). Windstorm includes people killed by falling objects or trees during very strong wind conditions and people who drowned in lakes because their boat capsized during such conditions.
* number of fatalities by lightning (German: Blitz).
* number of fatalities by ice avalanche (German: Eislawine).
* number of fatalities by earthquake (German: Erdbeben).
* number of fatalities by other processes like roof avalanche, lacustrine tsunami (German: andere Prozesse wie Dachlawine, Tsunami im See).

The data was collected based on newspaper research. For more information please refer to

_Badoux, A., Andres, N., Techel, F., and Hegg, C.: Natural hazard fatalities in Switzerland from 1946 to 2015, Nat. Hazards Earth Syst. Sci., 16, 2747-2768, https://doi.org/10.5194/nhess-16-2747-2016, 2016._

The data collection is financed by the FOEN (with exception of the collection of the avalanche fatalities). The data contains the official statistics of the FOEN on fatalities due to flood, debris flow, landslide, rock fall and avalanche.

Restrictions: The data set is not complete. Only fatalities in or around settlements and on open transportation routes are included. More precisely, fatalities were not collected, when persons exposed themselves to a great danger on purpose. Or fatalities during leisure activities which are connected to a higher risk were not included (this includes e.g. canoeing or river surfing during flood, canyoning, mountaineering, climbing, walking or driving on a closed road).

Fatalities by avalanches are collected at the WSL Institute for Snow and Avalanche Research SLF. You can download the avalanche fatalities per hydrological year [here](https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936) and per calendar year [here](https://www.envidat.ch/dataset/avalanche-fatalities-per-calendar-year-since-1936). For a direct comparison with the fatalities presented here, please download the data set with the calendar years and do not consider fatalities in the backcountry (tour) or in terrain close to ski areas (offpiste).

debris-flow-fatalities

display_name: debris-flow-fatalities

earthquake-fatalities

display_name: earthquake-fatalities

flood-fatalities

display_name: flood-fatalities

ice-avalanche-fatalities

display_name: ice-avalanche-fatalities

landslide-fatalities

display_name: landslide-fatalities

lightning-fatalities

display_name: lightning-fatalities

natural-hazard-fatalities

display_name: natural-hazard-fatalities

rockfall-fatalities

display_name: rockfall-fatalities

windstorm-fatalities

display_name: windstorm-fatalities


maintainer: Esther R. Frei

en: climate-change picea-abies g-tree swiss-alps stillberg treeline forest seedling-recruitment larix-decidua

en: G-TREE: Global Treeline Range Expansion Experiment Davos, Switzerland

media_type: text/plain

en: climate data G-TREE experiment, Davos, Switzerland

format: TXT

mimetype: text/plain

en: GTREE Website

en:
 Background information
Climate change-induced range expansion of treeline populations depends on their successful recruitment, which requires dispersal of viable seeds followed by successful establishment of individual propagules. The Global Treeline Range Expansion Experiment (G-TREE) is a global initiative involving researchers from Europe, North America, Australia and New Zealand (Brown et al., 2013). At 15 alpine and Arctic treeline sites worldwide the mechanisms determining the elevational and latitudinal distribution of tree populations are studied using a standardized experimental approach. In summer 2013, a multifactorial seedling recruitment experiment has been established at the Stillberg ecological treeline research site. The aim of this experiment, is to quantify the effect of multiple abiotic and biotic drivers on emergence, survival, and growth of *Larix decidua* and *Picea abies* seedlings in replicated plots along an elevation gradient with three sites below (1930 m a.s.l.), at (2090 m a.s.l.), and above treeline (2410 m a.s.l.; Frei et al., 2018). All plots have been surveyed annually to count seedlings and to measure their total height. Additional environmental factors, such as soil temperature, have been recorded.

 Experimental design
The Stillberg research area is located in the Eastern Swiss Alps near Davos, Switzerland. The site has been used for several long-term monitoring as well as experimental studies for the last four decades. Our G-TREE experiment consists of a lowest site located in a subalpine Larch-Spruce forest (*Larici-Picetum*) dominated by *Larix decidua* and *Picea abies* (1930 m a.s.l.), a transition zone site dominated by alpine shrubs (2100 m a.s.l.), and an uppermost site in an alpine meadow with some dwarf shrubs (2390 m a.s.l.). The three experimental sites were set up following the standard protocol of the global G-TREE initiative (Brown et al., 2013). In a split-plot design, 20 plots (224 cm × 45 cm) were established at each site, which were randomly assigned to the 2 × 2 treatment combinations of the main factors seeding and scarification (i.e. seeding and scarification, seeding only, scarification only, and full control), resulting in five replications per main treatment combination. Each plot was divided into 16 split-plots (22.5 cm × 28 cm), to which treatment combinations of four additional two-level factors species (larch and spruce), provenance (low- and high-elevation), herbivore exclosure (with and without exclosure), and seeding year (2013, 2014) were randomly assigned, which resulted in a total of 960 split-plots (Details see Frei et al. 2018).

 Data description
All plots have been surveyed annually to count seedlings and to measure their total height. Seedling height was assessed with a hand ruler as the total length from the original emerging point to the apical meristem (Details see Frei et al. 2018). Additionally, soil temperature at each site, has been continuously recorded since 2013. Here, we present data from eight years (2013–2021).

climate-change

display_name: climate-change

forest

display_name: forest

g-tree

display_name: g-tree

larix-decidua

display_name: larix-decidua

picea-abies

display_name: picea-abies

seedling-recruitment

display_name: seedling-recruitment

stillberg

display_name: stillberg

swiss-alps

display_name: swiss-alps

treeline

display_name: treeline


en: qgis-plugin geodata-processing swiss-geodata raster-processing seilaplan digital-elevation-model open-source digital-planning cable-yarding geoinformation-system

en: Seilaplan Tutorial: Merge DTM tiles

en: DHM-Kacheln zusammenfügen

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. In this tutorial video, we show how to merge multiple DTM raster tiles into one file, using the QGIS tool ‘Virtual Raster’. This simplifies the digital planning of a cable line using the QGIS plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to Seilaplan website: https://seilaplan.wsl.ch

***************************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. In diesem Tutorialvideo zeigen wir, wie man mit dem QGIS-Plugin Virtuelles Raster mehrere DHM-Kacheln zu einem einzigen Rasterfile zusammenfügen und abspeichern kann. Für die Seillinienplanung mit Seilaplan muss nun nur noch eine Datei, mein neues virtuelles Raster, ausgewählt werden.

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geodata-processing

display_name: geodata-processing

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

raster-processing

display_name: raster-processing

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

envidat

en: EnviDat: the Environmental Data Portal


maintainer: Adam Winstral

en: snow snow-simulation jules-investigation-model snow-depth jim

en: Meteorological data used to develop and validate the bias-detecting ensemble (BDE)

en: Station forcing data

en: All forcing data need to run JIM at HS and SWE stations. These are data downscaled directly from COSMO NWP data (WY14, WY15) and further enhanced by additional station observations of snow depth (HS) and air temperature (Ta) in WY17. Further information can be found in README file. Note that in WY14 and WY15, shortwave radiation was not split into direct and diffuse (not necessary for JIM) and that the default method in JIM for splitting precipitation phase was used. In WY 17, direct and diffuse were combined as input to JIM and JIM was forced with pre-processed liquid and solid precipitation phases.

en: DEM

en: 1-km resolution DEM used for downscaling gridded NWP data to stations and for distributing BDE evaluations at HS-stations to SWE-stations

en: HS and SWE observations

en: Automated (HS) and manual (SWE) data used to evaluate model simulations

en: File/data descriptor

en: These data were used to drive and evaluate Jules Investigation Model (JIM) snow simulations. The data provided are the forcing data used for the "deterministic" runs as described in Winstral et al., 2019. The bias-detecting ensemble (Winstral et al., 2019) used observed snow depths (HS) to detect biases in these deterministic simulations related to precipitation and energy inputs to JIM. Simulations that included the BDE evaluations substantially improved JIM simulations.

jim

display_name: jim

jules-investigation-model

display_name: jules-investigation-model

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-simulation

display_name: snow-simulation

educ

en: Education, culture and sport


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: meteorological-measurements soil-moisture dischma-catchment davos meteo-station

en: IRKIS Soil moisture measurements Davos

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Esther Frei

en: mountain-ecology stillberg treeline-ecosystems long-term-experiment literature-review

en: Bibliography of the long-term treeline research site Stillberg, Switzerland

media_type: .zip

en: The Stillberg bibliography (Stillberg_bibliography_v1.zip) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals (Stillberg_bibliography_data_v1.csv) along with the metadata file (Stillberg_bibliography_metadata_v1.csv). Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title.

en:
 Background information

The Stillberg ecological treeline research site in the Swiss Alps was established in 1975, with the aim to develop ecologically, technically, and economically sustainable reforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Over almost fifty years, research at the Stillberg site combined long-term monitoring of the large-scale high-elevation afforestation with experimental manipulations simulating global change impacts. Besides providing a scientific basis and practical guidelines for high-elevation afforestation, this research has contributed to a comprehensive understanding of ecological processes in the treeline ecotone across different compartments and scales, from individual trees, non-tree vegetation and soils to whole ecosystems, in the context of global change resulting in more than 150 publications.

 Dataset generation

We compiled a comprehensive list of scientific publications covering research at the Stillberg research site by conducting searches in the literature databases Web of Science and Google Scholar, as well as in the Digital Object Repository of the Swiss Federal Institute for Forest, Snow and Landscape Research WSL (DORA). We compiled all publications about the afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, the G-TREE experiment, as well as other studies related to the Stillberg research site.

 Data description

The Stillberg bibliography (Stillberg_bibliography_data_v1.csv) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals. Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title. The bibliography is described in a metadata file (Stillberg_bibliography_metadata_v1.csv). The bibliography along with the metadata file are provided in a ZIP-folder (Stillberg_bibliography_v1.zip).

literature-review

display_name: literature-review

long-term-experiment

display_name: long-term-experiment

mountain-ecology

display_name: mountain-ecology

stillberg

display_name: stillberg

treeline-ecosystems

display_name: treeline-ecosystems

envidat

en: EnviDat: the Environmental Data Portal


en: snow avalanche avalanche-forecast snow-stability-evaluation snowpack

en: Validating and improving the critical crack length in SNOWPACK

en: Stability tests

en: Stability tests including csv-files with CT, ECT and PST experiments for each year and each field site.

en: Extracted data

en: Extracted data contain validation and results published in Richter et al. (2019).

en: README

en: README file explaining data structure and content

en: Manually observed snow profiles

en: Manually observed snow profiles as csv-files containing depth [cm], thickness [cm], density [kg m-3], hand hardness, first grain type, second grain type, first grain size [mm], and second grain size [mm] of each layer.

en: SNOWPACK simulations

en: This dataset contains all SNOWPACK simulations, including input files, setup and output files.

en:
To validate the critical crack length as implemented in the snow cover model SNOWPACK, PST experiments were conducted for three winter seasons (2015-2017) at two field site above Davos, Switzerland. This dataset contains manually observed snow profiles and stability tests. Furthermore, corresponding SNOWPACK simulations are included.
These data were analyzed and results were published in Richter et al. (2019).

Please refer to the Readme file for further details on the data.

These data are the basis of the following publication:
Richter, B., Schweizer, J., Rotach, M. W., and van Herwijnen, A.: Validating modeled critical crack length for crack propagation in the snow cover model SNOWPACK, The Cryosphere, 13, 3353–3366, https://doi.org/10.5194/tc-13-3353-2019, 2019.

avalanche

display_name: avalanche

avalanche-forecast

display_name: avalanche-forecast

snow-stability-evaluation

display_name: snow-stability-evaluation

snowpack

display_name: snowpack


maintainer: Michael Lehning

en: winter-tourism snow-farming snow terrestrial-laser-scanning snowpack snow-conservation

en: Snowfarming data set Davos and Martell 2015

en: Fluela .smet

media_type: SMET

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Windtunnel and DAV.

en: HS Fluela autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903
Nodata: -9999

en: Martell .sno

media_type: SNO

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Martell heap

en: HS Fluela spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903

en: HS Martell autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en: Fluela .sno

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Flüela heap

en: Martell .smet

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Hintermartell.

en: HS Martell spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en:
Two data sets obtained for snow farming projects (Fluela, Davos, CH and Martell, IT) in 2015.

The data set contains for each site:

* 10 cm GIS raster of snow depth calculated from terrestrial laserscanning surveys (TLS) in the end of winter season (April/May)

* 10 cm GIS raster of snow depth calculated from TLS in the end of summer season (October)

Input files for SNOWPACK model:

* .sno: snow profile at the end of winter

* .smet: meteorological data measured by weather stations in the area

For more details see Grünewald, T., Lehning, M., and Wolfsperger, F.: Snow farming: Conserving snow over the summer season, The Cryosphere Discuss., https://doi.org/10.5194/tc-2017-93, in review, 2017.

snow

display_name: snow

snow-conservation

display_name: snow-conservation

snow-farming

display_name: snow-farming

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

winter-tourism

display_name: winter-tourism

educ

en: Education, culture and sport

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Anita C. Risch

en: grassland soil worldwide mineralization nutrient-network global soil-biology soil-chemistry

en:
site.code: Site code

Continent: Continent

sampleID: Sample ID

nn.latitude: Lattitude

nn.longitude: Longitude

bioclim.T.ann: Mean annual temperature (°C)

bioclim.T.var: Temperature variability (°C)

bioclim.T.q.wet: Temperature of the wettest quarter (°C)

bioclim.T.q.dry: Temperature of the driest quarter (°C)

bioclim.T.q.warm: Temperature of the warmest quarter (°C)

bioclim.P.ann: Mean annual preciptiation (mm)

bioclim.P.q.wet: Precipitation of the wettest quarter (mm)

ch.pH: pH

ch.WSK.vol: Water holding capacity (vol%)

ch.bulkdensity.gcm3: Bulk density (g cm-3)

ch.porespace: Pore space (vol%)

ch.sand.perc: Soil texture: sand (%)

ch.silt.perc: Soil texture: silt (%)

ch.clay.perc: Soil texture: clay (%)

ch.NO3start.mgg: NO3 at the beginning of the incubation (mgkg)

ch.Ntot.perc: Total soil N (%)

ch.Ctot.perc: Total soil C (%)

ch.Corg.perc: Soil organic C (%)

ch.netNminfield.mgkgd: Realised soil net N mineralisation (mg kg-1 d-1)

ch.netNminlab.mgkgd: Potential soil ne N mineralisation (mg kg-1 d-1)

archaea.cpg.log: Ammonia oxidising archaea (archaeal amoA gene copies g-1 soil)

bacteria.cpg.log: Ammonia oxidising bacteria (bacterial amoA gene copies g-1 soil)

micr.biom: Microbial biomass (ug g-1 soil)

ch.CtoN: C to N ratio

ch.netNnitriffield.mgkgd.sqrt: Realised soil net nitrification, transformed (mg kg-1 d-1)

ch.netNammoniffield.mgkgd.sqrt: Realised soil net ammonification, transformed (mg kg-1 d-1)

ch.netNnitriflab.mgkgd.sqrt: Potential soil net nitrification, transformed (mg kg-1 d-1)

ch.netNammoniflab.mgkgd.sqrt: Potential soil net ammonifiation, transformed (mg kg-1 d-1)

format: XLS

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch, A. C.; Zimmermann, S.; Ochoa-Hueso, R.; Schütz, M.; Frey, B.; Firn, J. L.; Fay, P. A.; Hagedorn, F.; Borer, E. T.; Seabloom, E. W.; et al. Soil net nitrogen mineralisation across global grasslands. Nat. Commun. 2019, 10 (1), 4981 (10 pp.). doi.org/10.1038/s41467-019-12948-2

Please cite this paper together with the citation for the datafile.

We conducted coordinated measurements of realised and potential soil net Nmin, and assessed water holding capacity, bulk density, C and N content, texture, pH, pore space, microbial biomass, and archaeal (AOA) and bacterial (AOB) ammonia oxidiser abundance using identical materials and methods across 30 grasslands on six continents. The sites covered a globally relevant range of climatic and edaphic conditions. Climate data was obtained from worldclim - Global climate data https://www.worldclim.org/

global

display_name: global

grassland

display_name: grassland

mineralization

display_name: mineralization

nutrient-network

display_name: nutrient-network

soil

display_name: soil

soil-biology

display_name: soil-biology

soil-chemistry

display_name: soil-chemistry

worldwide

display_name: worldwide

en: EnviDat: the Environmental Data Portal


en: uav gletscher glacier drone findelengletscher orthoimage griesgletscher dem alps sankt-annafirn orthophoto dsm

en: UAV-derived Digital Surface Models and orthoimages for three alpine glaciers

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 30th of August 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 15th of August 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 3rd of August 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 26th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 28th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 09th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 13th of September 2016.

media_type: application/pdf

en: This .pdf contains an orthoimage for each dataset as well as a Table which displays the number of flights made, image acquired, number of GCP set and the total area covered.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 21th of July 2015.

en: This folder contains all UAV flights paths that we created for the Sankt Annafirn, the Findelengletscher and Griesgletscher. They have been created with the software eMotion2, that was developped for the eBee platform from Sensefly.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 19th of April 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of July 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 22th of September 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 15th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 2nd of July 2016.

en: Bulk Data Access

en: Link to the S3 bucket where all the data resources can be downloaded in bulk

en:
 UAV-derived DSMs and orthoimages

Unmanned Aerial Vehicle (UAV) surveys were conducted between 2015 and 2016 on the Sankt Annafirn, Findelen- and Griesgletscher, situated in the Swiss Alps. Three surveys at the Sankt Annafirn allowed for a full glacier coverage, four surveys at Griesgletscher allowed an almost full glacier coverage and seven surveys at Findelengletscher allowed for a partial coverage of the glacier tongue (see individual datasets for exact extent). For each survey, a high resolution orthoimage and a Digital Surface Model (DSM) was created.

 UAV surveys:

Prior flight, Ground Control Points (GCPs) were deployed on the glacier surface and measured with a differential GPS (Trimble R7 or Leica GPS 1200). They allowed precise georeferencing of the UAV-derived datasets. UAV flight plans were planned with the software *eMotion 2* and a SenseFly eBee was used as surveying platform. The images were then processed with the software Agisoft Photoscan Pro 1.1.6 .

The location and dates of each survey can be found in the table together with the number of flights performed (Nflights), the number of acquired images (Nimages), the number of GCPs set (NGCPs) and the surveyed area.

A folder for each dataset is available (see folder name in table), which contains:

- An orthoimage *glacier_date_photoscan_oi_CH1903+_LV95_0.1m.tif*

- A Digital Surface Model *glacier_date_photoscan_dsm_CH1903+_LV95_0.1m.tif*

- The Agisoft Photoscan automatic processing report  *glacier_date_photoscan_report.pdf*

where:

- *glacier* is the name of the surveyed glacier

- *date* is the date of the UAV image acquisition

- *photoscan* is the name of the photogrammetric software

- *oi* or *dsm* the type of dataset

- *CH1903+_LV95* is the coordinate system and datum of the dataset

- *0.1m* is the resolution of the dataset in meter

- *.tif* is the extention of the dataset

Details about the UAV surveys, the image processing and the accuracy of the UAV-derived products can be found in this publication below.

Paper Citation:
 > _Gindraux et al. 2017. Accuracy Assessment of Digital Surface Models from Unmanned Aerial Vehicles’Imagery on Glaciers, Remote Sensing, 9, 186, 1-15, [doi: 10.3390/rs9020186](https://doi.org/10.3390/rs9020186)._

The folder UAV_flight_paths.zip contains all UAV flights performed on the Sankt Annafirn, Findelengletscher and Griesgletscher. The flights were planned with the software eMotion2 and have the .afp extention.

alps

display_name: alps

dem

display_name: dem

drone

display_name: drone

dsm

display_name: dsm

findelengletscher

display_name: findelengletscher

glacier

display_name: glacier

gletscher

display_name: gletscher

griesgletscher

display_name: griesgletscher

orthoimage

display_name: orthoimage

orthophoto

display_name: orthophoto

sankt-annafirn

display_name: sankt-annafirn

uav

display_name: uav


en: sdms aridity ground-temperature precipitation frost-change-velocity soil

en: Environmental layers for SDM simulations (GDPlants)

media_type: TIFF

format: TIFF

media_type: tif

en: Mean annual temperature modified from CHELSA

en: Soil organic carbon content modified from SoilGrids

en: Frost change frequency modified from CHELSA

en: Precipitation seasonality from CHELSA

en: Soil pH modified from SoilGrids

en: Precipitation of driest quarter modified from CHELSA

en: Soil clay content modified from SoilGrids

en: Mean diurnal range modified from CHELSA

en: The dataset contains seven environmental layers (average annual temperature, aridity [annual precipitation divided by annual potential evapotranspiration], frost change frequency, precipitation in the driest quarter, mean diurnal temperature range, and precipitation seasonality) modified from CHELSA (https://chelsa-climate.org/) and three soil layers (soil organic matter content, pH water, and clay content) modified from SoilGrids (https://soilgrids.org/).

aridity

display_name: aridity

frost-change-velocity

display_name: frost-change-velocity

ground-temperature

display_name: ground-temperature

precipitation

display_name: precipitation

sdms

display_name: sdms

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Yaquan Chang

en: model-residuals hengduan-mountains habitat-heterogeneity phytodiversity hypervolume

en: Phytodiversity is associated with habitat heterogeneity from Eurasia to Hengduan

en: Eurasia plant family richness map

en: This is the plant family level richness map at the Eurasia scale calculated from https://www.nature.com/articles/s41597-021-00997-6

en: HDM heterogeneity scales

en: The Heterogeneity matrics in the Hengduan mountain scale

en: Plant range map at Hengduan scale

en: This is the plant range map at the Hengduan mountain scale based on species distribution model, elevation, and county level distribution information

en: Hengduan plant family richness map

en: This is the family level plant richness map in the Hengduan mountain scale at 1km resoution

en: Eurasia SR and heteorgeneity

en: This table is used for the Eurasia scale analyses, including both family level species richness map and different heterogeneity predictors

en: This research data is used to re includes 1 km resolution seed plant species range maps for the Hengduan mountain region (southwest China), elevation information for each species, family-level plant richness data, and habitat heterogeneity data at both Eurasia and Hengduan mountain regions. This research data includes 1 km resolution seed plant species range maps for the Hengduan mountain region (southwest China), elevation information for each species, family-level plant richness data, and habitat heterogeneity data at both Eurasia and Hengduan mountain regions.

habitat-heterogeneity

display_name: habitat-heterogeneity

hengduan-mountains

display_name: hengduan-mountains

hypervolume

display_name: hypervolume

model-residuals

display_name: model-residuals

phytodiversity

display_name: phytodiversity


swiss-fluxnet-site-lageren

title_for_slug: swiss-fluxnet-site-lageren

en: swiss-forest-lab forest meteorological-measurements greenhouse-gas flux eddy-covariance swiss-fluxnet

en: Swiss FluxNet Site Lägeren

en: Site description

media_type: .pdf

en: Data access

media_type: .csv

en: The flux and meteo data of the Swiss FluxNet site Lägeren are openly available from the European Fluxes Database Cluster.

en: Fluxnet2015 dataset

en: The flux and meteo data of the Swiss FluxNet site Lägeren are also part of the Fluxnet2015 dataset.

en:
The Swiss FluxNet Site Lägeren is a managed mixed deciduous mountain forest located on the steep Lägeren mountain (NW of Zurich, Swiss Plateau). The forest is highly diverse, dominated by beech, but also including ash, maple, spruce and fir trees. Eddy covariance flux measurements were started in April 2004. The site was part of the international CarboEurope IP network and the National Air Pollution Monitoring Network (NABEL). In addition to Swiss FluxNet, the site is part of the Long-term Forest Ecosystem Research (LWF) of WSL and the biological drought and growth indicator network (TreeNet) of WSL.

Measurements

- Ecosystem flux measurements of CO2, H2O vapour are performed with the eddy-covariance method. This method is based on measurements of trace gas mixing ratios, using infrared gas analyzers (for CO2, H2O vapor), combined with wind speed and wind direction measurements, using 3D sonic anemometers. To resolve the short-term turbulent fluctuations in the atmosphere, very fast measurements are needed: we measure at 10-20 Hz, i.e., 10-20 times per second. To assess the energy budget of each ecosystem, also radiation sensors and soil climate profiles are installed at the site.
- Sub-canopy eddy fluxes (CO2, H2O), soil respiration campaigns
- Continuous CO2 profile measurements.
- Auxiliary micrometeorology and soil climate measurements.

Data availability

All data are available from the European Fluxes Database Cluster, but are also part of Fluxnet2015 dataset.

Data policy

ICOS data license:
[https://www.icos-cp.eu/data-services/about-data-portal/data-license](https://www.icos-cp.eu/data-services/about-data-portal/data-license)

Detailed site info:
[https://www.swissfluxnet.ethz.ch/index.php/sites/ch-lae-laegeren/site-info-ch-lae//](https://www.swissfluxnet.ethz.ch/index.php/sites/ch-lae-laegeren/site-info-ch-lae/)

eddy-covariance

display_name: eddy-covariance

flux

display_name: flux

forest

display_name: forest

greenhouse-gas

display_name: greenhouse-gas

meteorological-measurements

display_name: meteorological-measurements

swiss-fluxnet

display_name: swiss-fluxnet

swiss-forest-lab

display_name: swiss-forest-lab


data-analysis-toolkits

title_for_slug: data-analysis-toolkits

en: hypothesis-testing uncertainty statistics error-propagation bayesian-inference data-analysis

en: Data analysis toolkits

en: Toolkit 7: hypothesis testing, significance, and power

en: An overview of basic concepts -- and common pitfalls -- in statistical hypothesis testing, statistical significance, and power analysis

en: Toolkit 12: weighted averages and their uncertainties

en: There are two different ways to calculate the uncertainty of a weighted average. Software packages often don't tell you which one they are reporting, and the resulting errors can be huge.

en: Toolkit 8: Hodges-Lehmann estimators

en: A quick introduction to Hodges-Lehmann estimators (nonparametric measures of effect size)

en: toolkit 6: averaging in nonlinear functions

en: The average of a nonlinear function will not equal the function evaluated at its average inputs (the mean of the function will differ from from the function of the mean). This toolkit shows how to estimate that averaging bias.

en: Toolkit 11: serial correlation

en: Tools for detecting and correcting for serial correlation in analyses of time series

en: Toolkit 10: linear regression

en: An overview of the math, logic, and pitfalls of ordinary least-squares linear regression

en: Toolkit 9: Experimentwise error rates and statistical fishing expeditions

en: Statistical fishing expeditions, and how to avoid being misled by them

en: Toolkit 4: confidence intervals

en: Toolkit 1: graphically displaying data distributions

en: Toolkit 2: quantifying data distributions using descriptive statistics

en: Toolkit 3: tools for transforming data

en: The ladder of powers and a few other cool transformations

en: Toolkit 5: uncertainty analysis and error propagation

en: Gaussian error propagation, monte carlo methods, and first-order, second-moment error propagation

en:
These are condensed notes covering selected key points in data analysis and statistics. They were developed by James Kirchner for the course "Analysis of Environmental Data" at Berkeley in the 1990's and 2000's. They are not intended to be comprehensive, and thus are not a substitute for a good textbook or a good education!

License: These notes are released by James Kirchner under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.

bayesian-inference

display_name: bayesian-inference

data-analysis

display_name: data-analysis

error-propagation

display_name: error-propagation

hypothesis-testing

display_name: hypothesis-testing

statistics

display_name: statistics

uncertainty

display_name: uncertainty

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Loïc Pellissier Pellissier

en: community-indices plant-herbivore-interactions elevation herbivores-communities alps functional-traits environmental-gradients

en: Above- and below-ground herbivore communities along elevation

en: Orthoptera surveys

en: Species inventories of Orthoptera

en: Orthoptera traits

en: Orthoptera functional traits (incisive mandibular strength averaged by species)

en: Study sites

en: Coordinates and elevation of the study sites

en: Plant traits

en: Plant functional traits (SLA, LDMC, carbon and nitrogen content, punch strenght; averaged by species)

en: Nematode surveys

en: Surveys of soil nematode along elevation

en: Vegetion surveys

en: Species inventories of plants

en: Despite the common role of above- and below-ground herbivore communities in mediating ecosystem functioning, our understanding of the variation of species communities along natural gradient is largely strongly biased toward aboveground organisms. This dataset enables to study the variations in assemblages of two dominant groups of herbivores, namely, aboveground orthoptera and belowground nematodes together with their food plants. Herbivores and plant surveys were conducted in 48 natural grasslands along six elevation gradients, selected to span the major macro-climatic and environmental conditions of the Swiss Alps. It compiles herbivores and plant surveys, information on the study sites as well as plant and herbivores functional traits sought to be involved in trophic interactions and to respond to climatic variation along the elevation. Plant functional traits considered are the SLA, the LDMC, the C/N content, the punch strength (i.e. force required to pierce the leave lamina), the mandibular strength for Orthoptera insect. Data were collected during the summer 2016 and 2017.

alps

display_name: alps

community-indices

display_name: community-indices

elevation

display_name: elevation

environmental-gradients

display_name: environmental-gradients

functional-traits

display_name: functional-traits

herbivores-communities

display_name: herbivores-communities

plant-herbivore-interactions

display_name: plant-herbivore-interactions


maintainer: Albrecht von Boetticher

en: natural-hazard dberisintermixing interfoam shallow-landslide barrier-impact-simulation finite-volumes murgang hangmuren debris-flow

en: Three-dimensional debris flow simulation tool debrisInterMixing

en: Installation Instructions for debrisInterMixing-6

en: These are the installation instructions for debrisInterMixing4

en:
This version of debrisInterMixing is based on OpenFOAM Version 4.x and was tested on Ubuntu 18.04.1 LTS.
Please follow the instructions given in ReadMe_debrisInterMixing4.pdf for installation.

en: debrisInterMixing for OF-Version 6

en:
Here the updated versions of debrisInterMixing are provided for download. The first OpenFoam-compatible Version 2.3.x are available as supplement to v. Boetticher, A., Turowski, J. M., McArdell,W. B., Rickenmann, D., Hürlimann, M., Scheidl, C., and Kirchner, J. W.: DebrisInterMixing-2.3: A Finite Volume solver for three dimensional debris flow simulations based on two calibration parameters. Part two: model validation with experiments. Geoscientific Model Development, 10, 11: 3963-3978. doi: 10.5194/gmd-10-3963-2017.
DebrisInterMixing is a Volume-of-Fluid based Finite Volume code that accounts for shear-thinning sensitive shares of fine sediment suspension together with pressure-sensitive components of the gravel grains within debris flow mixtures. All model properties can be derived from a material sample except for a grid-sensitive calibration parameter.
For more information, please contact albrecht.vonboetticher@wasserbau.ch.

barrier-impact-simulation

display_name: barrier-impact-simulation

dberisintermixing

display_name: dberisintermixing

debris-flow

display_name: debris-flow

finite-volumes

display_name: finite-volumes

hangmuren

display_name: hangmuren

interfoam

display_name: interfoam

murgang

display_name: murgang

natural-hazard

display_name: natural-hazard

shallow-landslide

display_name: shallow-landslide

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal


maintainer: Lisa Hülsmann

en: forest-inventory fagus-sylvatica forest-reserves mortality-models primeval-forests tree-mortality

en: Data from: Does one model fit all? patterns of beech mortality in natural forests of three European regions

en: Ukrainian data

en:
READ ME for

Hülsmann L, Bugmann H, Commarmot B, Meyer P, Zimmermann S, Brang P
Data from: Does one model fit all? Patterns of beech mortality in natural forests of three European regions.
Ecological Applications http://dx.doi.org/10.5061/dryad.h4s6t

Forest inventory data of beech for the development of individual-tree mortality models from strict forests reserves in Switzerland, Germany and Ukraine.

The data package provides the files
CH_reduced: inventory data of the reduced dataset from Switzerland that was used to assess the influence of additional environmental and stand characteristics on beech mortality
CH: inventory data from strict forest reserves in Switzerland
DE: inventory data from strict forest reserves in Germany
UA: inventory data from a primeval beech forest in Ukraine

A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.
Diameter at breast height: dbh (mm)
Annual relative basal area increment: relBAI (), calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area (Bigler and Bugmann 2004)
Status of the tree: y, 0 = alive, 1 = dead
Length of the mortality period: dt (years)

Additional environmental and stand characteristics were derived for the reduced Swiss dataset.
Note the varying seasonal level of the covariates considering the entire year, the growing season from April to September (G) and the winter month January to March (W).
All climatic covariates were calculated for both the ‘growth’ (2) and the ‘mortality’ period (3). The stand covariates were derived for the second inventory of each record (2).

Mean diameter at breast height: dbh.mean.2 (mm)
Interquartile range of diameter at breast height: dbh.IQR.2 (mm)
Median diameter at breast height: dbh.median.2 (mm)
Basal area per hectare: BA.2 (m2 ha-1)
Number of trees per hectare: N.2 (ha-1)
pH-value: pH ()
Available water capacity in the soil: AWC (mm)
Mean annual precipitation sum: P.2, P.3 (mm)
Mean precipitation sum during growing season: PG.2, PG.3 (mm)
Mean annual air temperature: mT.2, mT.3 (°C)
Mean air temperature during growing season: mTG.2, mTG.3 (°C)
Mean air temperature during winter months: mTW.2, mTW.3 (°C)
Mean growing degree-days: GDD.2, GDD.3 ()
Mean number of months during growing season with water deficit: mDEFdurG.2, mDEFdurG.3 ()
Mean annual maximum water deficit: mDEFmax.2, mDEFmax.3 (mm)
Overall maximum of the annual maximum water deficit: maxDEFmax.2, maxDEFmax.3 (mm)
Mean of cumulative water deficit during growing season: mDEFcumG.2, mDEFcumG.3 (mm)
Overall maximum of cumulative water deficitduring growing season: maxDEFcumG.2, maxDEFcumG.3 (mm)
Percentage of years with at least one month water deficit: percDEF.2, percDEF.3 (%)

en: Swiss data full

en: Swiss data reduced

en: German data

en:
The datasets comprise nearly 19’000 trees of European beech (_Fagus sylvatica_ L.) from unmanaged forests in Switzerland, Germany / Lower Saxony and Ukraine. Tree death was modelled as a function of size and growth, i.e., stem diameter (DBH) and relative basal area increment (relBAI). To explain the spatial and temporal variability in mortality patterns, we considered a large set of environmental and stand characteristics.

 Inventory data
The strict forest reserves in Switzerland and Germany had been established in the period of 1961-1975 and 1971-1974, respectively. Every reserve included up to 10 permanent plots ranging from 0.09 to 1.8 ha in size, with slightly irregular re-measurement intervals. Permanent plots with pure or mixed beech stands were selected from the reserves of both networks. Reserves with considerable wind disturbance during the monitored intervals were excluded from the analysis. In addition to data from the Swiss and German reserves, data from a 10 ha plot in the primeval beech forest Uholka in Western Ukraine including three remeasurements were used. The inventory data provide diameter measurements at breast height (dbh) for revisited trees with a diameter of more than 4, 7 and 6 cm for Switzerland, Germany and Ukraine, respectively.

 Mortality predictors
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory. As an explanatory variable, the annual relative basal area increment (relBAI) was calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area. Tree dbh in the second inventory was used in addition to relBAI to model tree status (alive or dead) of the third inventory.

To increase the generality of the mortality models, we selected environmental variables that are known to have a considerable influence on growth and mortality of beech. We emphasized the effects of water availability using a large set of drought characteristics that were calculated based on the local site water balance. We also related beech mortality to soil pH, temperature, precipitation and growing degree-days. Additionally, we considered stand characteristics that reflect the development stage, competition and structure of the forests.

 Further information
For further information, refer to Hülsmann _et al_. (2016) Does one model fit all? patterns of beech mortality in natural forests of three European regions. _Ecological Applications_.

fagus-sylvatica

display_name: fagus-sylvatica

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves

mortality-models

display_name: mortality-models

primeval-forests

display_name: primeval-forests

tree-mortality

display_name: tree-mortality

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: orographic-precipitation precipitation-variability complex-terrain cosmo-wrf snow-precipitation

en: DISCHMEX - High-resolution WRF simulations in complex alpine terrain and station measurements

en: StationData

en: Snow depth maps over Dischma valley for 26 January 2016 and 9 March 2016 and snow depth differences between the two dates.

en:
The data presented here corresponds to the publication "Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain" (Gerber et al., 2018a), which investigates the precipitation variability of snow precipitation in the central northern part of the Grisons (CH) and the publication "The importance of near-surface winter precipitation processes in complex alpine terrain" (Gerber et al., 2018b). The dataset contains:

* WRFsimulations: WRF simulation output for simulations with 4x (14x) terrain smoothing with an output timestep of 30 min/5 min and horizontal grid spacings of 1350 m, 450 m, 150 m and 50 m (currently: data available upon request).
* StationData: Meteorological station data of 18 meteorological stations in the central northern part of the Grisons with 30 minute resolution for the period 1 January 2016 till 1 May 2016.
* ADS80data: Photogrammetrically determined snow depth distribution data over the Dischma valley for the 26 January 2016 and 9 March 2016. Snow heights are corrected for buildings, vegetation (> 1m), outliers, and pixles, which are obivously snow-free on the pictures (Bühler et al., 2015). In addition the snow depth differences (snow depth on 9 March 2016 minus snow depth on 26 January 2016) are provided.

For more details about the simulation and observation data, see Gerber et al., 2018 and Gerber and Sharma (2018).

Publications:

Bühler, Y., Marty, M., Egli, L., Veitinger, J., Jonas, T., Thee, P., and Ginzler, C.: Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9, 229–243, doi:10.5194/tc-9-229-2015, 2015.

Gerber, F., Besic, N., Sharma, V., Mott, R., Daniels, M., Gabella, M., Berne, A., Germann, U., and Lehning, M.: Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain, The Cryosphere, 12, 3137–3160, doi:10.5194/tc-12-3137-2018, 2018.

Gerber, F., Mott, R. and Lehning, M.: The importance of near-surface winter precipitation processes in complex alpine terrain, Journal of Hydrometeorology, accepted, 2018.

Gerber, F., and Sharma, V.: Running COSMO-WRF on very-high resolution over complex terrain. Laboratory of Cryospheric Sciences CRYOS, École Polytechnique Fédérale de Lausanne EPFL, Lausanne, Switzerland. doi:10.16904/envidat.35, 2018.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

orographic-precipitation

display_name: orographic-precipitation

precipitation-variability

display_name: precipitation-variability

snow-precipitation

display_name: snow-precipitation


weissfluhjoch-dataset-for-esm-snowmip

title_for_slug: weissfluhjoch-dataset-for-esm-snowmip

en: snow-depth snow-models esm-snowmip snow weissfluhjoch

en: Weissfluhjoch dataset for ESM-SnowMIP

en: ini file

en: This ini file is required by data-converter from MeteoIO version 1887 (http://models.slf.ch/p/meteoio/)

en: Conversion script

media_type: text/x-sh

en:
Use this script to convert WFJ_optimaldataset_v6.smet to wfj.smet, the file that is used for the ESM-SnowMIP project. It also requires the file: WFJ_AirPressure_Data.zip

Use: bash create_wfj_dataset.sh > input/wfj.smet

mimetype: text/x-sh

en: Dataset Weissfluhjoch for ESM-SnowMIP

en: This Weissfluhjoch dataset is a processed version of the Weissfluhjoch dataset version 6 from https://doi.org/10.16904/6. This dataset was specially created for the ESM-SnowMIP project. Here it is documented how this dataset has been created.

esm-snowmip

display_name: esm-snowmip

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-models

display_name: snow-models

weissfluhjoch

display_name: weissfluhjoch


maintainer: Chunhong Zhao

en: austin urban-morphology land-dynamics land-use landscape

en: Land use/cover dynamics in Austin metropolitan area since 1992

en: Land use dynamics in Austin since 1992

media_type: img

en: The present dataset is part of the published scientific paper Zhao C, Weng Q, Hersperger A M. Characterizing the 3-D urban morphology transformation to understand urban-form dynamics: a case study of Austin, Texas, USA. Landscape and urban planning, 2020, 203:103881. The overall objective of this paper is to understand urban form dynamics in the Austin metropolitan area for the periods 2006–2011 and 2011–2016. The study also aims to understand to what extent the changes in the built environment (in terms of ‘efficient growth’ versus ‘inefficient growth’) from the 1990s to 2016 in the Austin metropolitan area corresponded with ‘compact and efficient growth’ planning policy documents. The UMT distribution can be found in the paper. The area of transitioning UMT was provided in Table 2 and Table 3 can be found in the Appendix of the paper. A protocol was developed to perform the content analysis of the strategic plans and gather the data. The detailed list of protocol items can be found in Appendix B of the paper. This study demonstrates the advantage of applying Lidar data to characterize 3-D urban morphology type (UMT) transition and understand its dynamics, which helps develop a comprehensive understanding of the urbanization process and provides a tool for planning intentions and policies evaluation on urban development over time. The UMT maps can be found in Appendix A of the paper. The Lidar point datasets and the 30 × 30 m National Land Cover Database (NLCD) are the two main data sources of UMT mapping. Lidar datasets were gathered from different projects that had been conducted and collected by state agencies and other organizations between 2007 and 2017. Table A1 in the appendix in the paper shows the accuracies and acquisition parameters of the Lidar projects from 2007 to 2017. Land use/cover dynamics in Austin metropolitan area dataset provides Land use/cover patterns in the years 1992, 2001, 2004, 2006, 2008, 2011, 2013, 2016 with a spatial resolution of 30 meters. Since NLCD 1992 used a different classification system for the urban land classes, we first reclassified the NLCD 1992 using a customized Arcpy package.

austin

display_name: austin

land-dynamics

display_name: land-dynamics

land-use

display_name: land-use

landscape

display_name: landscape

urban-morphology

display_name: urban-morphology

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal


maintainer: Varun Sharma

en: snow-atmosphere-interaction blowing-snow antarctica mesoscale-modelling alps

en: Reproducibility Dataset for CRYOWRF v1.0

en:
REPRODUCIBILITY_POSTPROCESSING.zip contains data and scripts used to produce all figures from for the associated manuscript submitted for peer review ( see section on Citations below )

The folders stand for the three case studies presented in the manuscript. Two case studies (case Ia and case Ib) are on simulations in Antarctica and one case study
case II is for simulations in the Alps.

The associated data in the form of netcdf files or text files were produced using CRYOWRF v1.0

Apart from reproducibility, the intention of sharing these scripts is also to make it easy for new users to adopt CRYOWRF and be efficient, in particular in processing snowpack outputs.

The scripts were tested on multiple machines (different OSes) with the attached YAML file (wrf_analysis.yml) to setup the conda environment. All scripts were run using spyder as the IDE.

en: REPRODUCIBILITY_SIMULATION.zip contains all the extraneous files required to perform the simulations in associated manuscript (see Citations 3 in README.txt). The purpose of sharing these files apart from purposes of reproducibility is to also serve as templates for users to learn the workflow of CRYOWRF and perform simulations for their own purposes.

en:
This repository contains data required for reproducibility of the results to be published in the associated manuscript.

Apart from reproducibility, the attached datasets also serve as templates for new users to adopt CRYOWRF in their research.

The datasets consist of two folders organized in zip format:

1. REPRODUCIBILITY_SIMULATION:
  Consists of namelists for WPS, WRF and SNOWPACK to reproduce simulations published in the manuscript
  Additional files include datasets (from IMAU-FDM / RACMO, see "credits" below ) as well as helper python scripts to
  produce *.sno files
  which are used as initial conditions for SNOWPACK in CRYOWRF.

2. REPRODUCIBILITY_POSTPROCESSING:
   Includes outputs of CRYOWRF and python scripts used to prepare figures in the manuscript.

Each of the folders have their own readme files for more details.

 Code
citation: Varun Sharma. (2021, July 2). vsharma-next/CRYOWRF: CRYOWRF v1.0 (Version v1.0). Zenodo. http://doi.org/10.5281/zenodo.5060165

location: https://gitlabext.wsl.ch/atmospheric-models/CRYOWRF   (stable releases / institutional repo)
        https://github.com/vsharma-next/CRYOWRF            (dev branches / developer repo)

 Publication
**Introducing CRYOWRF v1.0: Multiscale atmospheric flow simulations with advanced snow cover modelling.**
Varun Sharma, Fraziska Gerber and Michael Lehning, Submitted to Geoscientific Model Development

 Acknowledgements
We thank Peter Kuipers Munneke (P.KuipersMunneke@uu.nl) for preparing and sharing outputs of IMAU-FDM and RACMO used for initial conditions for case Ia. The relevant citations for the methods through which these datasets were generated are:

* Kuipers Munneke, P., S. R. M. Ligtenberg, B. P. Y. Noël, I. M. Howat, J. E. Box, E. Mosley-Thompson, J. R. McConnell, K. Steffen, J. T. Harper, S. B. Das and M. R. van den Broeke. 2015. Elevation change of the Greenland ice sheet due to surface mass balance and firn processes, 1960-2014. The Cryosphere, 9, 2009-2025. doi:10.5194/tc-9-2009-2015

 * Ligtenberg, S. R. M., P. Kuipers Munneke, B. P. Y. Noël, and M. R. van den Broeke. 2018. Brief communication: Improved simulation of the present-day Greenland firn layer (1960-2016). The Cryosphere, 12, doi:10.5194/tc-12-1643-2018

alps

display_name: alps

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

mesoscale-modelling

display_name: mesoscale-modelling

snow-atmosphere-interaction

display_name: snow-atmosphere-interaction

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Armin Sigmund

en: snow-sublimation isotopic-distillation stable-water-isotopes evaporation antarctica backward-trajectories lagrangian-analysis

en: Modeled Isotopic Composition of Water Vapour Along Air Parcel Trajectories in the Antarctic

en: Python scripts for data visualization

en: Scripts for generating the figures of the related research article and generating the data files (csv) from the model output

en: Data

media_type: zip-compressed folder of csv

en: Modeled data including the data shown in the figures of the related research article

en: Model code

en: Model Sublimation and Model Air Parcel (python scripts)

en: Readme

media_type: TXT

en: Meta data

en:
 Summary

This data set contains Python programming code and modeled data discussed in a related research article. We developed a simple isotope model to study the drivers of the particularly depleted vapour isotopic composition measured on the ship of the Antarctic Circumnavigation Expedition close to the outlet of the Mertz glacier, East Antarctica, in the 6-day period from 27 January 2017 to 1 February 2017. The model considers the stable water isotopologues H2(16O), H2(18O), and HD(16O). It uses data from the ERA5 reanalysis product with a spatial resolution of 0.25° x 0.25° (Hersbach et al., 2018) and 10-day backward trajectories for the location of the ship, published by Thurnherr et al. (2020a). Our data set includes the model code, Python scripts for visualizing the results, and data produced by the model including the results shown in the figures of the related research article. Here, we summarize the most important model characteristics while further details can be found in the readme.txt file and the related research article including its supporting information.

 Main model characteristics

The modeling approach consists of two steps called *Model Sublimation* and *Model Air Parcel*. The former estimates the isotopic compositions of the snow and sublimation flux across the Antarctic Ice Sheet using an Eulerian frame of reference while the latter models the vapour isotopic composition and specific humidity along air parcel trajectories using a Lagrangian frame of reference. The isotope effects of most phase changes are represented by equilibrium fractionation. Only for ocean evaporation, kinetic fractionation is additionally taken into account (original Craig-Gordon formula). For snow sublimation, two assumptions are tested: *Run E* assumes that sublimation is associated with equilibrium fractionation while *Run N* assumes that sublimation occurs without isotopic fractionation.

 Model Sublimation
Model Sublimation uses a simple one-dimensional mass-balance approach in each grid cell, considering snow accumulation due to snowfall and vapour deposition and snow ablation due to sublimation. The snowpack is represented by 100 layers of equal thickness (e.g., 1 cm) and density (350 kg m-3). The isotopic composition of snowfall is parameterized by generalizing a site-specific, empirical relationship between the daily mean air temperature and snowfall isotopic composition. In the case of vapour deposition, Model Sublimation assumes equilibrium fractionation and estimates the isotopic composition of the atmospheric vapour as the average value for two idealized situations: (i) locally sourced vapour which has the same isotopic composition as the sublimation flux; (ii) non-locally sourced vapour in isotopic equilibrium with snowfall. Model Sublimation is run with a time step of 1 h, independently of Model Air Parcel.

 Model Air Parcel
Every hour, an ensemble of trajectories arrives at different heights in the ABL above the ship. For each of these trajectories, we consider an air parcel with a constant volume of 1 x 1 x 1 m3. The air parcels are initialized at the first suitable time when the trajectories are located in the ABL, either over the ice-free ocean in conditions of evaporation or over snow (Antarctic Ice Sheet or sea ice). Subsequently, the masses of the water isotopologues in the air parcels are simulated with a time step of 3 h, considering vapour uptake or removal due to the moisture flux at the snow or liquid ocean surface (only if the parcel is in the ABL) and cloud/precipitation formation (if the saturation specific humidity is reached). Sea ice is taken into account in a very simplified way. We represent the sea ice by grid cells with a sea-ice cover of more than 90% and assume the isotopic composition of the sublimation flux to be identical to that in the nearest grid cell of the Antarctic Ice Sheet. The isotopic composition of the sublimation flux is taken from Model Sublimation whereas the isotopic composition of the vapour deposition flux (over snow) and condensation flux (over ice-free ocean) is simulated assuming an isotopic equilibrium with the air parcel. Isotope effects of cloud/precipitation formation are represented using the classic Rayleigh distillation model with equilibrium fractionation, where the cloud water is assumed to precipitate immediately after formation.

 References

Hersbach, H., Bell, B., Berrisford, P., Biavati, G., Horanyi, A., Munoz Sabater, J.,... others (2018). *ERA5 hourly data on single levels from 1979 to present. Copernicus Climate Change Service (C3S) Climate Data Store (CDS)*. doi: 10.24381/cds.bd0915c6

Thurnherr, I., Wernli, H., & Aemisegger, F. (2020a). *10-day backward trajectories from ECMWF analysis data along the ship track of the Antarctic Circumnavigation Expedition in austral summer 2016/2017*. Zenodo. doi: 10.5281/zenodo.4031705

backward-trajectories

display_name: backward-trajectories

evaporation

display_name: evaporation

isotopic-distillation

display_name: isotopic-distillation

lagrangian-analysis

display_name: lagrangian-analysis

snow-sublimation

display_name: snow-sublimation

stable-water-isotopes

display_name: stable-water-isotopes


en: precipitation wind-speed long-term meteorology temperature swiss-forest-lab meteo relative-humidity climate-change par

en: Lausanne, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards

en: Site photo of the forest station (LAB)

media_type: image/jpeg

en: Site photo of the fforest station from the side.

mimetype: image/jpeg

en: Data plot of the forest station (LAB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Field station data (LAF)

media_type: text/csv

en: Data file.

en: Site aerial photo (Lausanne)

en: Site aerial photo from both Lausanne stations. Source: Google. 2016. Site aerial photo from both Lausanne stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Site photo of the field station (LAF)

en: Site photo of the field station from the side.

en: Data plot of the field station (LAF)

en: Forest station data (LAB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Lausanne in Switzerland where one station is located within a natural mixed forest stand (LAB) with European beech (_Fagus sylvatica_; 160-170 yrs), European silver fir (_Abies alba_; 160-170 yrs) and Norway spruce (_Picea abies_; 160-170 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, LAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Lausanne is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal


wind-lidar-davos-wolfgang

title_for_slug: wind-lidar-davos-wolfgang

en: profiles wind wolfgangpass raclets lidar

en: Wind LIDAR Davos Wolfgang

en: Wind LIDAR data Wolfgang

en: A Leosphere WidCube 100S was deployed at Davos Wolfang, measuring wind profiles as well as performing PPI and RHI scans. Time format is in UTC with highest time resolution of 5 seconds.

en: Scanning wind Lidar from Meteoswiss was installed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577) and measured from 200 m above ground to 8100 m. The time resolution is up to 5 seconds. The Lidar was measuring wind profiles but also performed plan position indicator (PPI) and range height indicator (RHI) scans.

lidar

display_name: lidar

profiles

display_name: profiles

raclets

display_name: raclets

wind

display_name: wind

wolfgangpass

display_name: wolfgangpass

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: snow-avalanche snow-mechanics acoustic-emissions viscous-deformation sintering snow snow-failure fiber-bundle-model

en: Fiber Bundle Model for snow failure and concurrent Acoustic Emissions

en: fiber-bundle-model-for-snow-failure

en: Data underlying Figures in publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted to "Geophysical Research Letters"

en:
This dataset contains modeled and experimental results for laboratory snow failure experiments and the concurrent acoustic emissions signatures for different loading rates. For modelling the snow failure we used a fiber bundle model that includes sintering and viscous deformation.

The data underlay the figures in the publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted for publication to "Geophysical Research Letters".

acoustic-emissions

display_name: acoustic-emissions

fiber-bundle-model

display_name: fiber-bundle-model

sintering

display_name: sintering

snow

display_name: snow

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-mechanics

display_name: snow-mechanics

viscous-deformation

display_name: viscous-deformation


en: biomass lidar terrestiral-laserscanning single-tree forest-inventory tree-volume

en: Individual tree TLS point clouds for tree volume estimation

media_type: ZIP

en: Individual tree parameters and volume estimates based on TLS point clouds and allometric models

media_type: CSV

en:
"ASM" denotes volume estimates calculated by allometric scaling models (as used in Swiss NFI), based on tree height, DBH and D7.
"QSM" denotes volume estimates derived from TLS point clouds by quantitative structure models (QSM).
The remaining variables are geometrical features directly calculated from single tree TLS point clouds.
For more detailed variable descriptions see related publication.

en:
 Dataset
This dataset is based on terrestrial laser scanning (TLS) data acquired during winter 2020/2021 in leaf-off conditions, with a Leica BLK 360 instrument following a tree-centric scanning pattern.
The data was acquired on two sites (47.42°N 8.49°E and 47.504°N, 7.78°E), both of which were managed mixed temperate forest stands.
Individual trees were semi-automatically segmented from the co-registered TLS point clouds.

 Background
Accurate estimates of individual tree volume or biomass within forest inventories are essential for calibration and validation of biomass mapping products based on Earth observation data.
Terrestrial laser scanning (TLS) enables detailed and non-destructive volume estimation of individual trees, with existing approaches ranging from simple geometrical features to virtual 3D reconstruction of entire trees. Validating such approaches with weight measurements is a key step before the integration of TLS or other close-range technologies into operational applications such as forest inventories.
In this study, we firstly evaluate individual tree volume estimation approaches based on 3D reconstruction through quantitative structure models (QSM) against destructive reference data of 60 trees and compare them to operational allometric scaling models (ASM).
Secondly, we determine the explanatory power of TLS-derived geometric parameters regarding total tree, stem, coarse wood and fine branch volume.

biomass

display_name: biomass

forest-inventory

display_name: forest-inventory

single-tree

display_name: single-tree

terrestiral-laserscanning

display_name: terrestiral-laserscanning

tree-volume

display_name: tree-volume


maintainer: Andrin Caviezel

en: stonenodedata deposition-points natural-hazards stonenode rockfall sensor-stream rockfall-runout dem induced-rockfall rockfall-experiments

en: Induced Rockfall Dataset (Small Rock Experimental Campaign), Tschamut, Grisons, Switzerland

en: Induced Rockfall Data, Tschamut, GR

en:
 Induced Rockfall Experimental Data, Tschamut, GR, Switzerland

The archive contains site specific geographical data as well as the deposition points of manually induced rockfall by releasing differently shaped boulders with 30–80 kg of mass. Additionally availabe are the StoneNode v1.0 sensor streams for the equipped rocks.

The _OverviewFigures_ file serves as quick representation of the included data. It also contains the overview table for the rock masses in order to set the dimensions accordingly in RAMMS::ROCKFALL.

The archive contains the following folders:
<\ul>
* DEM: ArcGIS compatible DEM Tschamut_DEM_2m (grid resolution of 2 m) as well as the .asc grid used in RAMMS::ROCKFALL simulations
* _DepositionPoints_: containing two folders _RF Tschamut Frozen_ and _RF Tschamut WET_ containing each a shapefile with the complete deposition data of each series as well as deposition shapfiles for each rock shape.
* _DigitizedRocks_: Digitized point clouds of the used rocks as used for RAMMS::ROCKFALL simulations (.pts files) (dimensions have to be checked).
* _Orthofoto_: Orthophoto of the experimental site obtained via UAV with 5 cm resolution.

en: StoneNode v1.0 Data for equipped experimental Runs.

en: Corresponding StoneNode v1.0 data streams belonging to the deposition points.

en:
 Dataset of an experimental campaign of induced rockfall in Tschamut, Grisons, Switzerland.

The data archive contains site specific geographical data such as DEM and orthophoto as well as the deposition points of manually induced rockfall by releasing differently shaped boulders with 30–80 kg of mass. Additionally available are all the StoneNode data streams for rocks equipped with a sensor. The data set consists of

* Deposition points from two series (wet (27/10/2016) and frozen (08/12/2016) ground)
* Digital Elevation Model (grid resolution 2 m) obtained via UAV
* Orthophoto (5 cm resolution) obtained via UAV
* Digitized rock point clouds (.pts input files for RAMMS::ROCKFALL)
* StoneNode v1.0 raw data stream for equipped rocks.

Further information is found in

* A. Caviezel et al., _Design and Evaluation of a Low-Power Sensor Device for Induced Rockfall Experiments_, IEEE Transactions on Instrumentation and Measurement, 2018, 67, 767-779, http://ieeexplore.ieee.org/document/8122020/
* P. Niklaus et al., _StoneNode: A low-power sensor device for induced rockfall experiments_, 2017 IEEE Sensors Applications Symposium (SAS), 2017, 1-6, http://ieeexplore.ieee.org/document/7894081/

dem

display_name: dem

deposition-points

display_name: deposition-points

induced-rockfall

display_name: induced-rockfall

natural-hazards

display_name: natural-hazards

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

rockfall-runout

display_name: rockfall-runout

sensor-stream

display_name: sensor-stream

stonenode

display_name: stonenode

stonenodedata

display_name: stonenodedata

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal


dischmex-meteorological-measurements

maintainer: Rebecca Mott

title_for_slug: dischmex-meteorological-measurements

en: dischmex meteorological-measurements meteorological-data meteo-station dischma

en: DISCHMEX - Meteorological measurements

en: Meteorological measurements 2014

en: Overview sensors

en: Meteorological measurement 2014

media_type: application/zip

en: data

en: Meteorological measurements 2016

en: Meteorological measurement 2015

en: Location of the meteorological stations

en:
Meteorological measurements recorded in the Dischma valley from 2014-2016. In 2014 and 2015 we used 11 mobile weather stations from sensorscope to record meteorological parameter in the upper Dischma valley in the closer surroundings of the Gletschboden area. The meteorological stations are eqiupped with at least air temperature/humidity, wind velocity and wind direction sensors. Some stations are additionally equipped with precipitation, shortwave radiation and snow surface temperature sensors.
Three transects were installed at different aspects and were equipped with air temperature/humidity and wind sensors. Transect 1 (stations 2-4) provides meteorological Information on an east-north-east facing slope at elevations ranging between 2100 m and 2500 m. Transect 2 (stations 5-7) provides meteorological Information on a south-west slope and transect 3 (stations 8-10) on a north-west slope. Station 1 is fully equipped with meteorological sensors (temperature/humidity, wind, IR, up and downwand shortwave radiation and precipitation).
In 2016, mobile stations from sensorscope were replaced with six permanent meteorological stations. Meteorological stations 1-3 are equipped with an air temperature/humidity sensor, two wind speed sensors, a wind direction sensor and an incoming and outgoing shortwave radiation sensor. Stations 4 and 6 are equipped with an air temperature/humidity sensor and a wind speed/direction sensor. Station 5 is a equipped with an air temperature/humidity sensor, a wind speed/direction sensor, a snow surface temperature sensor, an incoming and outgoing shortwave radiation sensor and an incoming longwave radiation sensor.

dischma

display_name: dischma

dischmex

display_name: dischmex

meteo-station

display_name: meteo-station

meteorological-data

display_name: meteorological-data

meteorological-measurements

display_name: meteorological-measurements

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: EnviDat Support

en: forest-inventory structure-from-motion terrestrial-laser-scanning lidar 3d-point-cloud terrestrial-photogrammetry unmanned-aerial-vehicle-laser-scanning mobile-laser-scanning

en: Ramerenwald Close Range Remote Sensing Benchmark

en:
Close Range Remote Sensing Benchmark for different LiDAR and photogrammetric Sensors in a mixed temperate forest.
Benchmarks are needed to evaluate the performance of different close-range remote sensing devices and approaches, both in terms of efficiency as well as accuracy. In this study we evaluate the performance of two terrestrial (TLS), one handheld mobile (PLS) and two drone based (UAVLS) laser scanning systems to detect trees and extract the diameter at breast height (DBH) in three plots with a steep gradient in tree and understorey vegetation density. As a novelty, we also tested the acquisition of 3D point-clouds using a low-cost action camera (GoPro) in conjunction with the Structure from Motion (SfM) technique and compared its performance with those of the more costly LiDAR devices.

forest-inventory

display_name: forest-inventory

lidar

display_name: lidar

mobile-laser-scanning

display_name: mobile-laser-scanning

structure-from-motion

display_name: structure-from-motion

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

terrestrial-photogrammetry

display_name: terrestrial-photogrammetry

unmanned-aerial-vehicle-laser-scanning

display_name: unmanned-aerial-vehicle-laser-scanning