en: wetlands environmental--policy environmental---history ecology historical-carthography switzerland

en: Wetlands 1850 - 2010 (shapefiles)

en:
 History of wetlands - GIS-Layers
 Location of wetlands based on signatures in topographic maps
* Basis 1850: original measuring table sheets Dufour created between the years 1834 and 1863.
* Basis 1900/ Basis 1950: The Siegfried maps were updated and published at regular intervals between 1870 and 1949. This long period of time made it possible to reconstruct wetlands for two periods based on the Siegfried Maps: the first edition (hereinafter referred to as "1900") and the last edition ("1950").
* Basis 2010: Map sheets from the National Map from 2006 to 2011 were used for the most recent time period of the reconstruction.
 Location of wetlands due to reconstructions
The reconstruction **must not** be interpreted in the sense of a surface-accurate separation, but shows without claim to location accuracy the approximate extent of the areas that would have corresponded to the mapping criteria for wetlands used in today's topographic maps around 1850, 1900 and 1950. The basics can be found in Stuber & Bürgi 2019, chapter 5.4.

en:
Naturally, large parts of the Swiss Plateau are characterised by wetlands
and meandering rivers. That this is no longer the case today is the result
of centuries of efforts to obtain dry land. But how did this process take
place? What were the relevant actors and what were their motivations? And
what can be said about the ecological consequences of this development?

In a research project on the history of wetlands in Switzerland since 1700,
we conducted (a) a historical analysis of the development of land use in
wetlands and the actors involved, (b) a historical-cartographic
reconstruction of wetland extent since 1850 and (c) an evaluation of
ecological effects of changes in wetlands on various organisms groups.

The series of GIS layers on wetland history stem from the second part of
the project. The area reconstruction is based on digitized and homogenized
signatures from national map series, as they have been available since
about 1850. Details about the digitalization process and the homogenization
procedures applied ("Rekonstruktionen") are included in Stuber & Bürgi
2019.

Book Citation:
 > Stuber M, Bürgi M (2019) Vom «eroberten Land» zum Renaturierungsprojekt. Geschichte der Feuchtgebiete in der Schweiz seit 1700. "Bristol Schriftenreihe", Band 59. Haupt Verlag, Bern, Stuttgart, Wien. 262 Seiten.

ecology

display_name: ecology

environmental---history

display_name: environmental---history

environmental--policy

display_name: environmental--policy

historical-carthography

display_name: historical-carthography

wetlands

display_name: wetlands

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: History of wetlands in Switzerland since 1850


maintainer: Nander Wever

en: snowmicropen snow-density-profile microstructure antarctica snow-density

state: active

type: dataset

en: Python code exported from the Jupyter notebook for processing the SnowMicroPen files

format: SERVICE

en: Manual snow pits and other snow density measurements

en: Documentation SnowMicroPen measurements

en: This *.zip archive contains all available documentation of the SnowMicroPen measurements, including the mapping of the SMP measurements in the terrestrial laser scan field at PEA (see documentation for 20161220) and at the Hammarryggen Ice Rise (see documentation for 20190104 and 20190111).

en: SnowMicroPen pts files and processed txt files

en: Zip archive containing the acquired *.pts files (binary files recorded by the SnowMicroPen), and the converted *.txt files using the SMP.ipynb jupyter notebook (see the python code in the other resources in this dataset)

en: Jupyter notebook for processing the SnowMicroPen files.

en: List of SnowMicroPen measurements

en: List of all SnowMicroPen measurements, including date and location, and processing status. This list has been generated by the python code (see other resources in this dataset).

en: SnowMicroPen (SMP) measurements and manual snowpits from Dronning Maud Land, East Antarctica. Measurements were taken in the vicinity of the Belgium Princess Elisabeth Station (PEA), in a transect towards the coast, and on the Lokeryggen and Hammarryggen Ice Rises near the coast. Measurements were taken during 3 individual campaigns in the 2016-2017, 2018-2019 and 2019-2020 field seasons.

antarctica

display_name: antarctica

microstructure

display_name: microstructure

snow-density

display_name: snow-density

snow-density-profile

display_name: snow-density-profile

snowmicropen

display_name: snowmicropen

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: SnowMicroPen measurements and manual snowpits from Dronning Maud Land, East Antarctica


modeling-snow-failure-with-dem

maintainer: EnviDat Support

title_for_slug: modeling-snow-failure-with-dem

en: snow-micro-mechanics discrete-element-modelling snow snow-avalanche snow-failure

en: Python file

en: Python file to reproduce the figures in Bobillier et al. (2019)

mimetype: text/x-python

en: Read-me

media_type: application/pdf

en: The read-me file contains a description of all the data provided in the zip file.

format: PDF

mimetype: application/pdf

en: Dataset

media_type: application/zip

en: The zip file contains the data underlying the figures presented in Bobillier et al. (2019). The figures can be reproduced with the python file, which is also provided.

format: ZIP

mimetype: application/zip

en: This data set includes the modeling results described in the research article by Bobiller et al. (2020). All the figures in the article can be reproduced with the data provided.

discrete-element-modelling

display_name: discrete-element-modelling

snow

display_name: snow

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-micro-mechanics

display_name: snow-micro-mechanics

en: Modeling snow failure with DEM


en: budburst phenology hatch chilling spongy-month

en: Temperature data Spongy moth experiment

en:
4 files with hourly temperature recorded at the height of buds in each of the four temperature treatments:
- Winter6: greenhouse where temperature was kept >6°C over winter
- Winter10: greenhouse where temperature was kept >10°C over winter
- OTC_Ambient: Open Top Chamber at Ambient temperature
- OTC_Warm: Open Top Chamber at +3.5°C warmer temperature

en: 3 R-Scripts used for the analyses of the temperature, phenology and performance/preference tests

en: Phenology and performance/preference tests Data

en:
-"Synchronex_Cuttings_Pheno.txt" provides the budburst date ('Stage 2') of each twig of the six studies species in the four different temperature treatments ("ambient", "a+5"=Ambient +5°C, 'Greenhouse-5'= Greenhouse at temperature >5°C, 'Greenhouse_10' = Greenhouse at temperature >10°C); 'Success' give the percentage of buds within the twig that succeeded to reach at least stage 2 during the experiment.

'Synchronex-Gypsy.txt' provides the number of eggs that have hatched at each monitoring date (Day of the year in columns); "DOY_hatch_1" corresponds to the first DOY when at least one egg has hatched; "Replicate_egg_mass" correspond to the egg mass replicate (1 to 5)

'PerformanceTest_GypsyMoth.txt' provides the biomass in mg of the caterpillars fed with fresh leaves of each tested tree species during one week. "Fresh_alive" is the biomass of only the living caterpillars after 1 week and "Freshpermoth" corresponds the weight per living caterpillar (Fresh alive/Nalive)

'PreferenceTest_All_species.txt' provides the total surface of leaf disc of each tested tree species remaining after exposing 5 caterpillars to these leaves during 24H. "Total_area" is the surface of the disc of each species measured after 24h exposed to the spongy moth first instars. For each species 'control' means the surface of the disc after 24H without any exposure to the larvae. 'EatenPercent correspond to the percentage surface loss compared to the control.

en:
The files correspond to the data and R-script used for the analyses of the following paper "Feasting on the ordinary or starving for the exceptional: phenological synchrony between spongy moth and budburst of European trees in a warmer climate" published in Ecology and Evolution by Vitasse et al. 2023.
There are three zip files corresponding to the Temperature data, phenology/preference/performance tests and R-Scripts for the analyses.

Input data:
'Synchrony_Cuttings_Pheno.txt':

budburst

display_name: budburst

chilling

display_name: chilling

hatch

display_name: hatch

phenology

display_name: phenology

spongy-month

display_name: spongy-month

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Synchrony between spongy moth hatching and leaf phenology of temperate trees


maintainer: Yves Bühler

en: snow hazard-mapping hazard-indication-mapping avalanche release ramms

en: Potential Release  Area  NHESS

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en: RAMMS simulations NHESS

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

hazard-mapping

display_name: hazard-mapping

ramms

display_name: ramms

release

display_name: release

en: Automated Avalanche Release Area (PRA) Delineation Davos


en: plants global-change species-distribution-models zonation migclim conservation beta-diversity land-use-change phylogenetic-diversity functional-diversity taxonomic-diversity european-alps

en: Data Access

format: GeoTIFF

en:
This repository contains extensive data for the European Alps:
  - Observations of ~3,500 plant species
  - Climate (1-km), soil (100-m) and land cover predictors (1km); current and future scenarios (28 CMIP6-GCMs, 2 land cover change and 3 dispersal scenarios i.e., unlimited, no and realistic vegetation dispersal)
  - Flora migration rates (categorical) and ecological preferences (continuous indicator values)
  - Regional maps of barriers to migration and water bodies at 100-m resolution
  - Sampling effort, distance to roads and cities predictors at 100-m resolution
  - Present and future abundances over the study region at 1-km resolution (~2,000 species)
  - Present and future multifaceted and uniqueness of the European Alps' Flora at 1-km resolution
  - Present and future conservation recommendations at 1-km resolution (26 current and future strategies)
  - Phylogenetic data and functional traits of ~2,000 plants (raw data and classification trees)
  - All scripts, data and plots used for the analyses, including a singularity container (mini-linux) to run them

beta-diversity

display_name: beta-diversity

conservation

display_name: conservation

european-alps

display_name: european-alps

functional-diversity

display_name: functional-diversity

global-change

display_name: global-change

land-use-change

display_name: land-use-change

migclim

display_name: migclim

phylogenetic-diversity

display_name: phylogenetic-diversity

plants

display_name: plants

species-distribution-models

display_name: species-distribution-models

taxonomic-diversity

display_name: taxonomic-diversity

zonation

display_name: zonation

en: Present and future multifaceted plant diversity, uniqueness and conservation in the European Alps


en: multilocus-genotypes population-genetics trichopria-drosophilae biological-control drosophila-suzukii switzerland simple-sequence-repeats nuclear-microsatellite-markers

media_type: text/csv

en: Multilocus genotypes (biallelic coding for 21 nuclear microsatellites) of Trichopria drosophilae described in Gugerli et al. Agrarforschung Schweiz 2019. Missing data denoted as '999'. Population codes (PopNo) are the following: 1, Vezia; 3, Contone ; 5, Davesco; 6, Corteglia; 7, Mezzana; 8, Stabio; 9, Gordola; 10, Sementina; 12, Brusata di Novazzano; 14, Monteggio; 16, Giubiasco; 17, ComoBP; 18, VD; 19, Weil_D; 20, Dossenheim; 21, BioPlanet_Como. Coordinates (CoordCH_E, CoordCH_N) refer to the Swiss coordinates system CH1903.

format: CSV

mimetype: text/csv

en: Table comprising all pertinent information for multiplex PCRs of species-specific nuclear microsatellite makers for Trichopria drosophilae, comprising all 21 newly developed markers, details on full sequences with GenBank accession numbers, primer sequences (including labeling and pig-tails), and repeat motives. PCRs with respective annealing temperatures (AnnealingTemp) refer to Type-It Multiplex PCR Kit (Qiagen, Hilden, Germany).

en:
 Nuclear microsatellite markers and genotype data for _Trichopria ddrosophilae_

This data set comprises (i) the characteristics of a set of 21 species-specific nuclear microsatellites for PCR amplification in _Trichopria drosophilae_ (ii) and genotype data for samples collected in southern Switzerland (Canton of Ticino), with few reference samples from Canton of Vaud, southern Germany, and northern Italy (lab-reared population).
Markers were developed by Ecogenics GmbH, Balgach (Switzerland), using MiSeq Nano 2x250 v2 format (on a mix of 10 individuals). Multiplex PCR assays for multilocus genotyping were established by Ecological Genetics (WSL Birmensdorf), and population genetic analyses are found in Gugerli et al., Agrarforschung Schweiz 2019.

biological-control

display_name: biological-control

drosophila-suzukii

display_name: drosophila-suzukii

multilocus-genotypes

display_name: multilocus-genotypes

nuclear-microsatellite-markers

display_name: nuclear-microsatellite-markers

population-genetics

display_name: population-genetics

simple-sequence-repeats

display_name: simple-sequence-repeats

switzerland

display_name: switzerland

trichopria-drosophilae

display_name: trichopria-drosophilae

en: Nuclear microsatellite markers for Trichopria drosophilae, parasitoid wasp on Drosophila suzukii


maintainer: Esther Frei

en: literature-review mountain-ecology treeline-ecosystems stillberg long-term-experiment

en: The Stillberg bibliography (Stillberg_bibliography_v1.zip) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals (Stillberg_bibliography_data_v1.csv) along with the metadata file (Stillberg_bibliography_metadata_v1.csv). Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title.

en:
 Background information

The Stillberg ecological treeline research site in the Swiss Alps was established in 1975, with the aim to develop ecologically, technically, and economically sustainable reforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Over almost fifty years, research at the Stillberg site combined long-term monitoring of the large-scale high-elevation afforestation with experimental manipulations simulating global change impacts. Besides providing a scientific basis and practical guidelines for high-elevation afforestation, this research has contributed to a comprehensive understanding of ecological processes in the treeline ecotone across different compartments and scales, from individual trees, non-tree vegetation and soils to whole ecosystems, in the context of global change resulting in more than 150 publications.

 Dataset generation

We compiled a comprehensive list of scientific publications covering research at the Stillberg research site by conducting searches in the literature databases Web of Science and Google Scholar, as well as in the Digital Object Repository of the Swiss Federal Institute for Forest, Snow and Landscape Research WSL (DORA). We compiled all publications about the afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, the G-TREE experiment, as well as other studies related to the Stillberg research site.

 Data description

The Stillberg bibliography (Stillberg_bibliography_data_v1.csv) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals. Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title. The bibliography is described in a metadata file (Stillberg_bibliography_metadata_v1.csv). The bibliography along with the metadata file are provided in a ZIP-folder (Stillberg_bibliography_v1.zip).

literature-review

display_name: literature-review

long-term-experiment

display_name: long-term-experiment

mountain-ecology

display_name: mountain-ecology

stillberg

display_name: stillberg

treeline-ecosystems

display_name: treeline-ecosystems

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Bibliography of the long-term treeline research site Stillberg, Switzerland


maintainer: Francesco Comola

en: cohesion saltation sand wind snow sediment

en: Output of the model simulations

en: Model results on granular splash and saltation process of sand and snow particles

en:
The wind-driven saltation of sand and snow shapes dunes and ripples, generates dust emission, and erodes the surface of the Antarctic ice sheet. Here, we use a model based on the discrete element method to simulate grain-flow interactions and study the effect of particle cohesion on saltation dynamics.

The data contains the model output of granular splash simulations and saltation simulations. Granular splash, the main particle entrainment process in saltation, occurs upon impact of saltating particles with the granular bed. We performed Monte Carlo simulations of granular splash for loose sand grains and for cohesive ice grains. The analysis indicate that different values of cohesion have significant effects not on the number of splashed grains, on the ejection velocity, and the rebound velocity.

In our saltation simulations, we trigger particle movement with a single splash event at the inlet section section and let the system evolve until steady state. Our results show that saltation over cohesive surfaces is difficult to initiate but easy to sustain at low wind speed. The occurrence of transport thus depends on the history of the wind speed, a phenomenon known as hysteresis. We also show that saltation over cohesive surfaces presents higher mass fluxes but requires longer distances to saturate, which increases the size of the smallest stable surface ripples. Our model results have implications for large-scale aeolian processes on Earth and Titan, where sand grains are thought to be very cohesive.

cohesion

display_name: cohesion

saltation

display_name: saltation

sand

display_name: sand

sediment

display_name: sediment

snow

display_name: snow

wind

display_name: wind

en: Saltation of cohesive granular materials


maintainer: Sofia Pagliarin

en: copernicus urban-atlas milan barcelona soil-sealing imperviousness

en: Information on data sources

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas

en: Soil sealing Barcelona and Milan different territorial levels


maintainer: Matthias Haeni

en: meteo wind-speed swiss-forest-lab precipitation meteorology temperature relative-humidity long-term par climate-change

en: Forest station data (OTB)

en: Data file.

en: Site photo of the field station (OTF)

en: Site photo of the field station from below (viewing upwards the slope).

mimetype: image/jpeg

en: Data plot of the forest station (OTB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Othmarsingen)

en: Site aerial photo from both Othmarsingen stations. Source: Google. 2016. Site aerial photo from both Othmarsingen stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the field station (OTF)

en: Site photo of the forest station (OTB)

en: Site photo of the forest station from above (viewing downwards the slope).

en: Field station data (OTF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Othmarsingen in Switzerland where one station is located within a natural deciduous forest stand (OTB) with European beech (_Fagus sylvatica_; 120-140 yrs) and lime trees (_Tilia sp._; 120-140 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, OTF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Othmarsingen is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Othmarsingen, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


maintainer: Thorsten Bartels-Rausch

en: antarctica reaction heterogeneous interface ozone laboratory-study arctic alpine solution snow brine metamorphism chemistry

en: Matlab Script to view and plot data

en: Readme file

en: This file shows data, code, and plots.

en: Data Figure 1

en: Data of published Figure

en: Matlab Data

en: All data as Matlab mat file

en: data list

en: Lists file names, snow sample properties, and flow settings for each data-set.

en: Ozone data

en: Trend of ozone mixing ratio ( _O3mixingRatio_ppb_ with time ( _time_s_ ) as measured downstream of the snow sample during the experiments. Time "0" denotes the time when data acquisition with ozone analyser was started. And, ozone (_nOzone_molec_per_s_ ) loss for each experiment with duration of ozone exposure ( _duration_s_ ) of ozone exposure, as derived from the ozone trends shown above. Time "0" denotes the time when the carrier gas with ozone was passed via the snow sample.

en: Acetone data

en:
intensity of the acetone-water-cluster and water-cluster (as derived by a chemical ionisation mass spectrometer) with time in the carrier gas downstream of packed bed flow tube holding the snow sample or the by-pass, respectively. Time "0" denotes the time when the mass spectrometer data acquisition was started. When the carrier
gas with acetone was passed via the packed bed flow tube, that is switched from by-pass to pass the snow, acetone concentration in the carrier gas rapidly dropped due to surface adsorption and slowly recovered as the adsorption sites saturate. From this, the surface area can be obtained.

en: Earth’s snow cover is very dynamic on diurnal time scales. The changes to the snow structure during this metamorphism have wide ranging impacts such as on avalanche formation and on the capacity of surface snow to exchange trace gases with the atmosphere. Here, we investigate the influence of dry metamorphism, which involves fluxes of water vapor, on the chemical reactivity of bromide in the snow. For this, the heterogeneous reactive loss of ozone at a concentration of 5-6E12 molecules cm-3 is investigated in artificial, shock-frozen snow samples doped with 6.2 uM sodium bromide and with varying metamorphism history. The oxidation of bromide in snow is one reaction initiating polar bromine releases and ozone depletions.

alpine

display_name: alpine

antarctica

display_name: antarctica

arctic

display_name: arctic

brine

display_name: brine

chemistry

display_name: chemistry

heterogeneous

display_name: heterogeneous

interface

display_name: interface

laboratory-study

display_name: laboratory-study

metamorphism

display_name: metamorphism

ozone

display_name: ozone

reaction

display_name: reaction

snow

display_name: snow

solution

display_name: solution

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data set on bromide oxidation by ozone in snow during metamorphism from laboratory study


maintainer: Jana von Freyberg

en: hydrology alptal catchment stable-water-isotope stream-water precipitation

media_type: text/plain

en: Single comma-separated txt-file with daily data of stable water isotopes measured in streamwater and precipitation in the Swiss Alptal catchment and two of its tributaries (Erlenbach and Vogelbach), as well as daily data of key hydrometeorological variables from the Alptal valley

format: TXT

en: Data Set Documentation: alptal_Isotopes_daily_2015-2019_v2

en: Documentations contains meta data of the data columns and information about the study catchments.

en:
Version 2 of the dataset contains additional information on:
- line-conditioned (lc) excess
- precipitation sample volumes
- isotope data quality

en: This dataset contains four years of daily measurements of the natural isotopic composition (2H, 18O) of precipitation and stream water at the Alp catchment (area 47 km2) in Central Switzerland and two of its tributaries (0.73 km2 and 1.55 km2). In addition, the dataset contains daily measurements of key hydrometeorological variables.

alptal

display_name: alptal

catchment

display_name: catchment

hydrology

display_name: hydrology

precipitation

display_name: precipitation

stable-water-isotope

display_name: stable-water-isotope

stream-water

display_name: stream-water

en: Four years of daily stable water isotope data in stream water and precipitation from three Swiss catchments


maintainer: Merin Reji Chacko

en: biodiversity-assessment dna-metabarcoding environmental-dna spatial-ecology biomonitoring

en: Analysis and Figures

en: This zipped file includes R scripts and the datasets required to run the analyses. A README describes the columns in each dataset.

en: Genomic data

en: Fastq files, primer descriptions and the final output dataset.

en: Field Metadata

en: Information concerning the locations and times of sampling, as well as the identity of the samplers and relevant comments.

en: This dataset contains the results of a five-day field excursion which the extent to which eDNA sampling can capture the diversity of a region with highly heterogeneous habitat patches across a wide elevation gradient through multiple hydrological catchments of the Swiss Alps. Using peristaltic pumps, we filtered 60 L of water at five sites per catchment for a total volume of 1 800 L. Using an eDNA metabarcoding approach focusing on vertebrates and plants, we detected 86 vertebrate taxa spanning 41 families and 263 plant taxa spanning 79 families across ten catchments. This dataset includes two sets of data. The first (Genomic data) includes all the necessary data for the bioinformatic pipeline, whereas the second (Analysis Figures) contains tidied data and scripts for the reproduction of all figures/analyses in the article describing this study.

biodiversity-assessment

display_name: biodiversity-assessment

biomonitoring

display_name: biomonitoring

dna-metabarcoding

display_name: dna-metabarcoding

environmental-dna

display_name: environmental-dna

spatial-ecology

display_name: spatial-ecology

en: Vertebrate and plant taxa recovered from 10 catchments in Vaud using an eDNA-metabarcoding approach


maintainer: Anita C. Risch

en: soil worldwide soil-biology global grassland nutrient-network soil-chemistry mineralization

en:
site.code: Site code

Continent: Continent

sampleID: Sample ID

nn.latitude: Lattitude

nn.longitude: Longitude

bioclim.T.ann: Mean annual temperature (°C)

bioclim.T.var: Temperature variability (°C)

bioclim.T.q.wet: Temperature of the wettest quarter (°C)

bioclim.T.q.dry: Temperature of the driest quarter (°C)

bioclim.T.q.warm: Temperature of the warmest quarter (°C)

bioclim.P.ann: Mean annual preciptiation (mm)

bioclim.P.q.wet: Precipitation of the wettest quarter (mm)

ch.pH: pH

ch.WSK.vol: Water holding capacity (vol%)

ch.bulkdensity.gcm3: Bulk density (g cm-3)

ch.porespace: Pore space (vol%)

ch.sand.perc: Soil texture: sand (%)

ch.silt.perc: Soil texture: silt (%)

ch.clay.perc: Soil texture: clay (%)

ch.NO3start.mgg: NO3 at the beginning of the incubation (mgkg)

ch.Ntot.perc: Total soil N (%)

ch.Ctot.perc: Total soil C (%)

ch.Corg.perc: Soil organic C (%)

ch.netNminfield.mgkgd: Realised soil net N mineralisation (mg kg-1 d-1)

ch.netNminlab.mgkgd: Potential soil ne N mineralisation (mg kg-1 d-1)

archaea.cpg.log: Ammonia oxidising archaea (archaeal amoA gene copies g-1 soil)

bacteria.cpg.log: Ammonia oxidising bacteria (bacterial amoA gene copies g-1 soil)

micr.biom: Microbial biomass (ug g-1 soil)

ch.CtoN: C to N ratio

ch.netNnitriffield.mgkgd.sqrt: Realised soil net nitrification, transformed (mg kg-1 d-1)

ch.netNammoniffield.mgkgd.sqrt: Realised soil net ammonification, transformed (mg kg-1 d-1)

ch.netNnitriflab.mgkgd.sqrt: Potential soil net nitrification, transformed (mg kg-1 d-1)

ch.netNammoniflab.mgkgd.sqrt: Potential soil net ammonifiation, transformed (mg kg-1 d-1)

format: XLS

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch, A. C.; Zimmermann, S.; Ochoa-Hueso, R.; Schütz, M.; Frey, B.; Firn, J. L.; Fay, P. A.; Hagedorn, F.; Borer, E. T.; Seabloom, E. W.; et al. Soil net nitrogen mineralisation across global grasslands. Nat. Commun. 2019, 10 (1), 4981 (10 pp.). doi.org/10.1038/s41467-019-12948-2

Please cite this paper together with the citation for the datafile.

We conducted coordinated measurements of realised and potential soil net Nmin, and assessed water holding capacity, bulk density, C and N content, texture, pH, pore space, microbial biomass, and archaeal (AOA) and bacterial (AOB) ammonia oxidiser abundance using identical materials and methods across 30 grasslands on six continents. The sites covered a globally relevant range of climatic and edaphic conditions. Climate data was obtained from worldclim - Global climate data https://www.worldclim.org/

global

display_name: global

grassland

display_name: grassland

mineralization

display_name: mineralization

nutrient-network

display_name: nutrient-network

soil

display_name: soil

soil-biology

display_name: soil-biology

soil-chemistry

display_name: soil-chemistry

worldwide

display_name: worldwide

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Elisabeth Hafner

en: snow satellite validation avalanche-hazard-mapping avalanche

en: Satellite Avalanche Mapping Validation data and data description

en: 14 shapefiles to be used only together with the data description also provided as a pdf.

en:
Validation points, validation area, ground truth coverage, SPOT 6 avalanche outlines, Sentinel-1 avalanche outlines, Sentinel-2 avalanche outlines, Davos avalanche mapping (DAvalMap) avalanche outlines as shapefiles and a detailed attribute description (DataDescription_EvalSatMappingMethods.pdf).

Coordinate system: CH1903+_LV95

The generation of this dataset is described in detail in:

Hafner, E. D., Techel, F., Leinss, S., and Bühler, Y.: Mapping avalanches with satellites – evaluation of performance and completeness, The Cryosphere, https://doi.org/10.5194/tc-2020-272, 2021.

avalanche

display_name: avalanche

avalanche-hazard-mapping

display_name: avalanche-hazard-mapping

satellite

display_name: satellite

snow

display_name: snow

validation

display_name: validation

en: Satellite avalanche mapping validation data


weather-station-klosters

maintainer: Maxime Hervo

title_for_slug: weather-station-klosters

en: precipitation weather raclets klosters wind temperature

en: Weather Station Klosters

en: All in one weather station measuring temperature (°C), humidity (%), wind (m s‾ ¹) and precipitation type. The time format is: number of days from January 0, 0000, UTC.

en: A weather station (Lufft WS600) measured meteorological parameters at Klosters (LON: 9.880413, LAT: 46.869019). Detailed information on the specifications can be found [here](https://www.lufft.com/products/compact-weather-sensors-293/ws600-umb-smart-weather-sensor-1832/productAction/outputAsPdf/).

klosters

display_name: klosters

precipitation

display_name: precipitation

raclets

display_name: raclets

temperature

display_name: temperature

weather

display_name: weather

wind

display_name: wind


en: intraspecific-variation emerald-ash-borer invasive-species fraxinus cross-resistance ash-dieback defense-chemistry

en: Raw data-Publication cross-resistance in ash-New Phytologist

en:
What are the research data files about: Raw data on perfomance (dry weight, development and mortality) of emerald ash borer larvae used in published bioassays. Raw data on ash dieback leasion lenghts. Raw data on untargeted and targeted specialized ash metabolites.
Which methods were used: Bioassays in greenhouses and climate chambers to collect data on emerald ash borer and ash dieback perfomance. Phytochemical analyses on ash phloem for quantifiying specialized metabolites
When and where was the data created / extracted: Summer 2020-2021

en:
 What are the research data files about: Raw data on perfomance (dry weight, development and mortality) of emerald ash borer larvae used in published bioassays. Raw data on ash dieback leasion lenghts. Raw data on untargeted and targeted specialized ash metabolites.

Which methods were used: Bioassays in greenhouses and climate chambers to collect data on emerald ash borer and ash dieback perfomance. Phytochemical analyses on ash phloem for quantifiying specialized metabolites.

When and where was the data created / extracted: Summer 2020-2021

ash-dieback

display_name: ash-dieback

cross-resistance

display_name: cross-resistance

defense-chemistry

display_name: defense-chemistry

emerald-ash-borer

display_name: emerald-ash-borer

fraxinus

display_name: fraxinus

intraspecific-variation

display_name: intraspecific-variation

invasive-species

display_name: invasive-species

en: Raw data-Publication cross-resistance in ash - New Phytologist


en: weisfluhjoch shortwave-radiation radiation davos longwave-radiation

en: Processing doc

en: Description of processing code that was ported to R by P. Frei (2016).

en: Metadata

en: DATA ACCESS

en: ASRB radiation station at the Weissfluhjoch versuchsfeld.

en: Parameter file

en: Description of ASRB parameters.

mimetype: text/plain

en:
Incoming and outgoing shortwave and longwave 2 min radiation measurements at the Weissfluhjoch research site, Davos, CH. The experimental site at the Weissfluhjoch (WFJ, 46.83 N, 9.81 E) is located at an altitude of 2540 m in the Swiss Alps near Davos. During the winter months, almost all precipitation falls as snow at this altitude. As a consequence, a continuous seasonal snow cover builds up every winter, with a maximum snow height ranging from 153–366 cm over the period 1934–2012. The measurement site is located in an almost flat part of a southeast oriented slope.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

davos

display_name: davos

longwave-radiation

display_name: longwave-radiation

radiation

display_name: radiation

shortwave-radiation

display_name: shortwave-radiation

weisfluhjoch

display_name: weisfluhjoch

educ

en: Education, culture and sport

en: ASRB_WFJVF: Shortwave and longwave radiation measurements (2 min) at the Weissfluhjoch research site, Davos


maintainer: EnviDat

en: metadata-convention research-data-management csv meteorological-data-format nead

en: NEAD syntax v0.1 (EBNF)

en: PyNEAD (future reference implementation)

en: NEAD on GitHub

media_type: text/html

format: HTML

en: MeteoIO (future reference implementation)

mimetype: text/html

en:
Acknowledgement: The NEAD format includes NetCDF metadata and is proudly inspired by both SMET and NetCDF formats. NEAD is designed as a long-term data preservation and exchange format.

The NEAD specifications were presented at the "WMO Data Conference 2020 - Earth System Data Exchange in the 21st Century" (Virtual Conference).

-----------------------

Summary:
The Non-Binary Environmental Data Archive (NEAD) format is being developed as a generic and intuitive format that combines the self-documenting features of NetCDF with human readable and writeable features of CSV. It is designed for exchange and preservation of time series data in environmental data repositories.

License: The NEAD specifications are released to the public domain under a Creative Commons CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

csv

display_name: csv

metadata-convention

display_name: metadata-convention

meteorological-data-format

display_name: meteorological-data-format

nead

display_name: nead

research-data-management

display_name: research-data-management

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Non-Binary Environmental Archive Data (NEAD) format


maintainer: Yohann Chauvier

en: point-process-model independent-dataset covariate-correction random-stratified-sampling background-data environmental-stratification plant-species survey-effort target-group cluster

en: Non-copyright data, scripts, diversity outputs

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models


en: climate-change precipitation-amount orographic-precipitation cmip5 air-temperature

en: Download Server

en:
Predicting future climatic conditions at high spatial resolution is essential for many applications in science. Here we present data for monthly time series of precipitation and minimum and maximum temperature for four downscaled global circulation models. We used model output statistics in combination with mechanistic downscaling (the CHELSA algorithm) to calculate mean monthly maximum and minimum temperatures, as well as monthly precipitation sums at ~5km spatial resolution globally for the years 1850-2100. We validated the performance of the downscaling algorithm by comparing model output with observed climates for the years 1950-2069.

CHELSA_cmip5_ts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

climate-change

display_name: climate-change

orographic-precipitation

display_name: orographic-precipitation

precipitation-amount

display_name: precipitation-amount

en: High resolution monthly precipitation and temperature timeseries for the period 2006-2100


swiss-fluxnet-site-davos

title_for_slug: swiss-fluxnet-site-davos

en: swiss-fluxnet meteorological-measurements eddy-covariance greenhouse-gas forest flux icos swiss-forest-lab

en: Fluxnet2015 dataset

en: Processed flux and meteo data are also part of the Fluxnet2015 dataset.

en: Data access

en: The flux and meteo data of the Swiss FluxNet site Davos are openly available. Near real-time flux and meteo data are uploaded daily to the ICOS Carbon Portal.

en: Site description

en: Processed data

en: Processed flux and meteo data are available from the European Fluxes Database Cluster.

en:
The Swiss FluxNet Site Davos is a managed subalpine evergreen forest, located on the Seehorn mountain near Davos in the Swiss Alps. The site is dominated by Norway spruce. The tower is owned by the Federal Office for the Environment (FOEN).
Ecosystem flux measurements of CO2, H2O (since 1997) as well as CH4 and N2O (since 2016) are performed with the eddy covariance method.
In addition to Swiss FluxNet, the site is part of the National Air Pollution Monitoring Network (NABEL), the Long term Forest Ecosystem Research (LWF), the biological drought and growth indicator network (TreeNet) and of ICOS Switzerland (Integrated Carbon Observation System). Since November 2019, the site is an ICOS Class 1 Ecosystem station.

Measurements

- Ecosystem flux measurements of CO2, H2O vapour (since 1997) as well a CH4 and N2O (since 2016) are performed with the eddy-covariance method. This method is based on measurements of trace gas mixing ratios, using infrared gas analyzers (for CO2, H2O vapor) and laser spectrometers (for CH4 and N2O), combined with wind speed and wind direction measurements, using 3D sonic anemometers. To resolve the short-term turbulent fluctuations in the atmosphere, very fast measurements are needed: we measure at 10-20 Hz, i.e., 10-20 times per second. To assess the energy budget of each ecosystem, also radiation sensors and soil climate profiles are installed at the site.
- Sub-canopy eddy fluxes (CO2, H2O, since 2023 also CH4).
- Continuous profile concentration and forest floor flux measurement of CO2, H2O, CH4, N2O.
- Auxiliary micrometeorology and soil climate measurements.

Data availability

Near real-time flux and meteo data uploaded daily to the ICOS Carbon Portal. Processed flux and meteo data are also available from the European Fluxes Database Cluster and part of Fluxnet2015 dataset.

Data policy

ICOS data license:
[https://www.icos-cp.eu/data-services/about-data-portal/data-license](https://www.icos-cp.eu/data-services/about-data-portal/data-license)

Detailed site info:
[https://www.swissfluxnet.ethz.ch/index.php/sites/ch-dav-davos/site-info-ch-dav/](https://www.swissfluxnet.ethz.ch/index.php/sites/ch-dav-davos/site-info-ch-dav/)

eddy-covariance

display_name: eddy-covariance

flux

display_name: flux

forest

display_name: forest

greenhouse-gas

display_name: greenhouse-gas

icos

display_name: icos

meteorological-measurements

display_name: meteorological-measurements

swiss-fluxnet

display_name: swiss-fluxnet

swiss-forest-lab

display_name: swiss-forest-lab

educ

en: Education, culture and sport

en: Swiss FluxNet Site Davos


ceilometer-klosters

title_for_slug: ceilometer-klosters

en: vertical-visibility raclets cloud-base-height klosters ceilometer

en: Ceilometer data Klosters

en: Ceilometer installed at Klosters measuring cloud base height, cloud cover and backscatter profile. The time resolution is 30 seconds, with time given in number of days from January 0, 0000, UTC. More information on the variables in the manufacturer manual.

en: Cloud base height (m) and vertical visibility (m) were measured with the VAISALA Ceilometer CL31 in Klosters (LON: 9.880413, LAT: 46.869019). The CL31 is an instrument with constant reliability for all weather conditions and simultaneous detection of three cloud layers in heights up to 7.6 km.

ceilometer

display_name: ceilometer

cloud-base-height

display_name: cloud-base-height

klosters

display_name: klosters

raclets

display_name: raclets

vertical-visibility

display_name: vertical-visibility

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Ceilometer Klosters


maintainer: Andrin Caviezel

en: stonenode rockfall-experiments rockfall natural-hazards dem deposition-points rockfall-runout sensor-stream stonenodedata induced-rockfall

en: Induced Rockfall Data, Tschamut, GR

en:
 Induced Rockfall Experimental Data, Tschamut, GR, Switzerland

The archive contains site specific geographical data as well as the deposition points of manually induced rockfall by releasing differently shaped boulders with 30–80 kg of mass. Additionally availabe are the StoneNode v1.0 sensor streams for the equipped rocks.

The _OverviewFigures_ file serves as quick representation of the included data. It also contains the overview table for the rock masses in order to set the dimensions accordingly in RAMMS::ROCKFALL.

The archive contains the following folders:
<\ul>
* DEM: ArcGIS compatible DEM Tschamut_DEM_2m (grid resolution of 2 m) as well as the .asc grid used in RAMMS::ROCKFALL simulations
* _DepositionPoints_: containing two folders _RF Tschamut Frozen_ and _RF Tschamut WET_ containing each a shapefile with the complete deposition data of each series as well as deposition shapfiles for each rock shape.
* _DigitizedRocks_: Digitized point clouds of the used rocks as used for RAMMS::ROCKFALL simulations (.pts files) (dimensions have to be checked).
* _Orthofoto_: Orthophoto of the experimental site obtained via UAV with 5 cm resolution.

en: StoneNode v1.0 Data for equipped experimental Runs.

en: Corresponding StoneNode v1.0 data streams belonging to the deposition points.

en:
 Dataset of an experimental campaign of induced rockfall in Tschamut, Grisons, Switzerland.

The data archive contains site specific geographical data such as DEM and orthophoto as well as the deposition points of manually induced rockfall by releasing differently shaped boulders with 30–80 kg of mass. Additionally available are all the StoneNode data streams for rocks equipped with a sensor. The data set consists of

* Deposition points from two series (wet (27/10/2016) and frozen (08/12/2016) ground)
* Digital Elevation Model (grid resolution 2 m) obtained via UAV
* Orthophoto (5 cm resolution) obtained via UAV
* Digitized rock point clouds (.pts input files for RAMMS::ROCKFALL)
* StoneNode v1.0 raw data stream for equipped rocks.

Further information is found in

* A. Caviezel et al., _Design and Evaluation of a Low-Power Sensor Device for Induced Rockfall Experiments_, IEEE Transactions on Instrumentation and Measurement, 2018, 67, 767-779, http://ieeexplore.ieee.org/document/8122020/
* P. Niklaus et al., _StoneNode: A low-power sensor device for induced rockfall experiments_, 2017 IEEE Sensors Applications Symposium (SAS), 2017, 1-6, http://ieeexplore.ieee.org/document/7894081/

dem

display_name: dem

deposition-points

display_name: deposition-points

induced-rockfall

display_name: induced-rockfall

natural-hazards

display_name: natural-hazards

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

rockfall-runout

display_name: rockfall-runout

sensor-stream

display_name: sensor-stream

stonenode

display_name: stonenode

stonenodedata

display_name: stonenodedata

en: Induced Rockfall Dataset (Small Rock Experimental Campaign), Tschamut, Grisons, Switzerland


en: weissfluhjoch longwave-radiation outgoing incoming shortwave-radiation

en: DATA ACCESS

en: Metadata

en: Processing doc

en: Parameter file

en:
Corrected incoming and outgoing shortwave and longwave 2 min radiation measurements at the Weissfluhjoch summit, Davos, CH.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

incoming

display_name: incoming

longwave-radiation

display_name: longwave-radiation

outgoing

display_name: outgoing

shortwave-radiation

display_name: shortwave-radiation

weissfluhjoch

display_name: weissfluhjoch

en: ASRB_WFJ: Shortwave and longwave radiation measurements (2 min) at the Weissfluhjoch research site, Davos


en: biogas manure review bioenergy switzerland

en: Production de biogaz à partir d’engrais de ferme en Suisse

en: L'objectif de ce livre blanc est de fournir aux décideurs, aux administrations et aux parties prenantes les résultats de recherche les plus récents afin de promouvoir l'utilisation optimale de la bioénergie issue des engrais de ferme dans la transition énergétique suisse. A cette fin, les résultats du centre de compétence suisse pour la recherche en bioénergie - SCCER BIOSWEET - sont résumés et présentés dans un contexte plus large. Si rien d'autre n'est mentionné, les résultats se réfèrent à la Suisse et, dans le cas de la matière première, aux potentiels nationaux de biomasse.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal


en: water-demand climate-change water-scarcity reservoirs water-supply

en: Water demand version 2 (corrected version)

en: Water supply

en: Simulated discharge series for a reference period 1981-2010 and till the end of the century. Data are provided for 39 climate model chains and a control run based on the observed meteorology. Data are provided at daily resolution (mm/d).

en: Reservoir volumes

en: Reservoir volume for the 307 medium-sized catchments for different storage categories: natural lakes, artificial reservoirs, reservoirs for artificial snow production, drinking water reservoirs, and usable volumes of natural lakes. Unit: Mio m³. One column per catchment (see shapefile).

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of 307 catchments for which estimates of water supply, demand, and reservoir volumes are provided. The OBJECTID entry corresponds to the catchment ID which is used as a reference in the other datasets provided.

en: Water demand (deprecated)

en:
Warning: please use the corrected version 2, since this file contains errors for certain categories such as Livestock, Industry or Houshold.

Water demand estimates for the 307 medium-sized catchments for different categories for current and future conditions. One text file is provided per demand category. One column corresponds to one catchment (IDs compare to shapefile), The data are provided at monthly resolution in mm/d and can be converted to volumes by using the catchment area. E.g.
Q[mm/d] * catchment area [m²] /1000 = Q[m³/d]
or to obtain discharge in m³/s
Q[mm/d] * catchment area [m²]/1000/24/3600 = Q [m³/s].
Future irrigation and hydropower water demand are provided per climate model chain.

en:
The dataset Hydro-CH2018 reservoirs provides estimates of current and future water supply, water demand, and storage volumes for 307 medium-sized catchments in Switzerland.
Water supply for current (1981-2010) and future (2070-2099) climate conditions was simulated using the hydrological model PREVAH. For modeling current water supply, observed meteorological time series were used as input, while simulated meteorological time series derived from 39 model chains of the CH2018 initiative were used as an input for simulating future climate conditions.

Water demand was estimated for six categories:

- 1) Drinking water (households and tourism),
- 2) industry (second and third sector),
- 3) artificial snow production,
- 4) agriculture (irrigation and livestock feeding),
- 5) ecology (residual flows), and
- 6) hydropower.

Future estimates consider changes in demand related to population growth and changes in the hydrological conditions.
Storage volumes are provided for natural lakes (storage capacities and usable volumes), artificial reservoirs, reservoirs for artificial snow production, and drinking reservoirs.

A detailed description of the simulation and estimation procedures can be found in

*  Brunner, M.I., Björnsen Gurung, A., Zappa, M., Zekollari, H., Farinotti, D., Stähli, M., 2019. Present and future water scarcity in Switzerland: Potential for alleviation through reservoirs and lakes. Sci. Total Environ. 666, 1033–1047. https://doi.org/10.1016/j.scitotenv.2019.02.169.

This dataset contains the following information:

1.	Shapefile with the 307 medium-sized Swiss catchments.
2.   Textfiles with the water supply simulations for the control run and the 39 climate model chains (one file per chain) at daily resolution for the 307 catchments.
3.	Textfiles with the current and future demand estimates per category at monthly resolution for the 307 catchments.
4.	Textfiles with the storage volumes per category and catchment.

climate-change

display_name: climate-change

reservoirs

display_name: reservoirs

water-demand

display_name: water-demand

water-scarcity

display_name: water-scarcity

water-supply

display_name: water-supply

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Hydro-CH2018 reservoirs


maintainer: Ionuț Iosifescu Enescu

en: map 0.2GB

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en: map preview 0.5MB

en: map 1GB

en: map 0.5GB

en: large map 10GB

en: Bulk Data Access

en: Link to the S3 bucket where all the data resources can be downloaded in bulk

en: map 2GB

en: huge map 100GB

en:
The attached data are some large GIS raster files (GeoTIFFs) made with Natural Earth data. Natural Earth is a free vector and raster map data @ naturalearthdata.com. The data used for creating these large files was the "Cross Blended Hypso with Shaded Relief and Water". Data was concatenated to achieve larger and larger files. Internal pyramids were created, in order that the files can be opened easily in a GIS software such as QGIS or by a (future) GIS data visualisation module integrated in EnviDat.

Made with Natural Earth. Free vector and raster map data @ naturalearthdata.com

gis

display_name: gis

large-files

display_name: large-files

natural-earth

display_name: natural-earth

qgis

display_name: qgis

en: Large GIS raster data derived from Natural Earth Data (Cross Blended Hypso with Shaded Relief and Water)


maintainer: Roksolana Petrovska

en: dominance mortality-rate regeneration acer shade-tolerance lar fagus

en: The R-script of survival analysis for accelerated failure time model

en: Mortality of regeneration

en: Acer platanoides, Acer pseudoplatanus and Fagus sylvatica living and dead juveniles (0-500 cm in height) grown in the deep shade of a prime beech-dominated forest.

en:
 One individual per species, vitality class (low and high) and height class (eight classes: 0–10, 11–20, 21–35, 36–60, 61–90, 91–130, 131–200 and 201–500 cm) was randomly selected and harvested in each of the six plots. This resulted in a sample of 82, 80 and 89 living individuals of A. platanoides, A. pseudoplatanus and F. sylvatica, respectively.

 Additionally stems of dead Acer spp. and F. sylvatica trees that had died within the last three years (2015–2018) were randomly harvested, matching the height classes of the harvested living trees wherever possible. In total, 179 dead young trees (60 A. platanoides, 72 A. pseudoplatanus and 47 F. sylvatica) were collected.

 Variables:
* species_code: a_pla - Acer platanoides, a_pse - Acer pseudoplatanus, f_syl - Fagus sylvatica
* species: as above
* dummy: 0 - living individual, 1 - dead individual
* LAR_cm2_g: leaf area ratio or ratio of leaf area to total plant biomass, [cm2/g]
* tree_age: in years
* avg_ring_micron: average width of the last 5 rings in tree life excluding the last ring
* dry_mass_g: aboveground and belowground biomass
* DLI: direct light index (measured only under living individuals)
* BLI: diffuse light index (measured only under living individuals)
* GLI: global light index

acer

display_name: acer

dominance

display_name: dominance

fagus

display_name: fagus

lar

display_name: lar

mortality-rate

display_name: mortality-rate

regeneration

display_name: regeneration

shade-tolerance

display_name: shade-tolerance

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Mortality of regeneration: Acer spp. and Fagus sylvatica


maintainer: Thomas Wohlgemuth

en: pairwise-stand-comparisons soil-impacts forest-management biogeography biodiversity

en: headers

en: Description of headers for data_wohlgemuth_etal_Neobiota_2022

en: references

en: Bibliography of all references cited in data_wohlgemuth_etal_Neobiota_2022.

en: Baseline data

en: Compiled data on the impacts of seven important NNTs (Acacia dealbata, Ailanthus altissima, Eucalyptus globulus, Prunus serotina, Pseudotsuga menziesii, Quercus rubra, Robinia pseudoacacia) on physical and chemical soil and biodiversity in Europe, and summarise commonalities and differences. A total of 107 publications considered, studies referred to biodiversity attributes and soil properties: 2804 lines and 30 rows.

biodiversity

display_name: biodiversity

biogeography

display_name: biogeography

forest-management

display_name: forest-management

pairwise-stand-comparisons

display_name: pairwise-stand-comparisons

soil-impacts

display_name: soil-impacts

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Impact of non-native tree species in Europe on soil properties and biodiversity: a review


maintainer: Dominique Weber

en: mowing remote-sensing sentinel-2 grassland use-intensity management land-use landsat

en: Grassland-use intensity map 2018

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2018. See readme file for more details.

en: Grassland-use intensity map 2021

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2021. See readme file for more details.

en: Preview time of 1st grassland management event 2020

media_type: image/png

en: Spatial distribution of the timing (day of year; DOY) of the first management event for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the timing of the first event of the year (Weber et al., 2023; IN REVIEW)

format: PNG

en: Readme

en: Metadata and description of the individual raster layers

en: Preview number of grassland management events 2020

en: Spatial distribution of the number of management events for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the distribution of management frequency (Weber et al., 2023; IN REVIEW)

en: Grassland-use intensity map 2019

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2019. See readme file for more details.

en: Grassland-use intensity map 2020

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2020. See readme file for more details.

en:
A rule-based algorithm [(Schwieder et al., 2022)](https://doi.org/10.1016/j.rse.2021.112795) was used to produce annual maps for 2018–2021 of grassland-management events, i.e. mowing and/or grazing, for Switzerland using Sentinel-2 and Landsat 8 satellite time series. All satellite images were processed with the [FORCE](https://force-eo.readthedocs.io) framework.

The resulting maps provide information on the number and timing of grassland-management events at a spatial resolution of 10 m × 10 m for the whole of Switzerland. For the final maps, permanent grasslands were masked using a variety of land-use layers, according to [Huber et al. (2022)](https://doi.org/10.1002/rse2.298) but replacing the crop mask with the agricultural-use data from the cantons.

We assessed the detection of management events based on independent reference data, which we acquired from daily time series of publicly available webcams that are widely distributed across Switzerland. We further tested the ecological relevance of the generated intensity measures in relation to nationwide biodiversity data (see Weber et al., 2023; IN REVIEW).

grassland

display_name: grassland

land-use

display_name: land-use

landsat

display_name: landsat

management

display_name: management

mowing

display_name: mowing

remote-sensing

display_name: remote-sensing

use-intensity

display_name: use-intensity

en: Grassland-use intensity maps for Switzerland


maintainer: EnviDat Support

en: numerical-model pattern-formation vapor-transport python snow

en:
Data and code v1.0 downloaded from the git.

Running the code requires an installation of FEniCS via docker.

en:
This python code uses the Finite Element library FEniCS (via docker) to solve the one dimensional partial differential equations for heat and mass transfer in snow. The results are written in vtk format.

The dataset contains the code and the output data to reproduce the key Figure 5 from the related publication:

_Schürholt, K., Kowalski, J., Löwe, H.; Elements of future snowpack modeling - Part 1: A physical
instability arising from the non-linear coupling of transport and phase changes, The Cryosphere, 2022_

The code and potential updates can be accessed directly through git via:

https://gitlabext.wsl.ch/snow-physics/snowmodel_fenics

numerical-model

display_name: numerical-model

pattern-formation

display_name: pattern-formation

python

display_name: python

snow

display_name: snow

vapor-transport

display_name: vapor-transport

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: A numerical solver for heat and mass transport in snow based on FEniCS


maintainer: Michael Lehning

en: snowpack snow terrestrial-laser-scanning snow-farming snow-conservation winter-tourism

en: Fluela .smet

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Windtunnel and DAV.

en: HS Martell autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en: Martell .smet

en: Meteodata used as input for SNOWAPCK simulations, orginating from Station Hintermartell.

en: HS Fluela spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903

en: Fluela .sno

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Flüela heap

en: HS Fluela autumn 2015

en:
Snow depth/ height of snow heap in autumn 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: CH1903
Nodata: -9999

en: HS Martell spring 2015

en:
Snow depth/ height of snow heap in spring 2015 obtained by terrestrial laserscanning
cell size: 10 cm
spatial reference: European Datum 1950 UTM
Nodata: -9999

en: Martell .sno

en: Input snow profile (.sno file) used for SNOWPACK simulations of the Martell heap

en:
Two data sets obtained for snow farming projects (Fluela, Davos, CH and Martell, IT) in 2015.

The data set contains for each site:

* 10 cm GIS raster of snow depth calculated from terrestrial laserscanning surveys (TLS) in the end of winter season (April/May)

* 10 cm GIS raster of snow depth calculated from TLS in the end of summer season (October)

Input files for SNOWPACK model:

* .sno: snow profile at the end of winter

* .smet: meteorological data measured by weather stations in the area

For more details see Grünewald, T., Lehning, M., and Wolfsperger, F.: Snow farming: Conserving snow over the summer season, The Cryosphere Discuss., https://doi.org/10.5194/tc-2017-93, in review, 2017.

snow-conservation

display_name: snow-conservation

snow-farming

display_name: snow-farming

snowpack

display_name: snowpack

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

winter-tourism

display_name: winter-tourism

en: Snowfarming data set Davos and Martell 2015


automatic-detection-of-avalanches

maintainer: Matthias Heck

title_for_slug: automatic-detection-of-avalanches

en: avalanche-activity seismic hidden-markov-model snow monitoring

en: Results and Scripts

en: This zip package contains the classification results, coherence results, reference data set, python scripts used for the classification and the start and end times for the pre-processed continuous seismic data. A further readme file is also include for more detailed information.

en: This dataset contains the results obtained by an automatic classification using hidden Markov models of a continuous seismic dataset. To avoid long computational times, we reduced the seismic data using pre-processing step. The start and end times of the windows used for the classification are also included in this dataset. Furthermore, an avalanche reference data set is included and the python scripts used to perform the processing steps and the classification.

avalanche-activity

display_name: avalanche-activity

hidden-markov-model

display_name: hidden-markov-model

monitoring

display_name: monitoring

seismic

display_name: seismic

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Automatic detection of avalanches


maintainer: Matthias Haeni

en: par long-term relative-humidity meteorology climate-change swiss-forest-lab wind-speed meteo temperature precipitation

en: Site photo of the field station (BAF)

en: Site photo of the field station from below (viewing upwards the slope).

en: Forest station data (BAB)

en: Data file.

en: Site aerial photo (Beatenberg)

en: Site aerial photo from both Beatenberg stations. Source: Google. 2016. Site aerial photo from both Beatenberg stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Site photo of the forest station (BAB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Data plot of the field station (BAF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the forest station (BAB)

en: Field station data (BAF)

en:
High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Beatenberg in Switzerland where one station is located within a natural coniferous forest (BAB) with Norway spruce (_Picea abies_; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Beatenberg is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the
Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Beatenberg, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Daniela Brito Melo

en: drifting-snow large-eddy-simulations mixed-grain-transport saltation snow-cohesion

en: LES-LSM code

en: Source code used to perform the analysis presented at the research article "Modeling snow saltation: the effect of grain size and interparticle cohesion". The source code is also available at the WSL/SLF GitLab Repository (https://gitlabext.wsl.ch/atmospheric-models/les-lsm).

en: Data in Figures

en: Simulation results presented in Figures 1 to 11 of the research article "Modeling snow saltattion: the effect of grain size and interparticle cohesion" in csv format.

en:
This dataset includes the parallel application and the main results supporting the research article "Modeling snow saltation: the effect of grain size and interparticle cohesion" published at the Journal of Geophysical Research: Atmospheres.
The code is a flow solver based on the Large Eddy Simulation (LES) technique coupled with a Lagrangian Stochastic Model (LSM). The interaction of snow particles with the bed is modeled with statistical and physically-based models for aerodynamic entrainment, rebound and splash, following the works of Groot Zwaaftink et al. (2014), Comola and Lehning (2017) and Sharma et al. (2018). This algorithm was also used by Sigmund et al. (2021) to model snow sublimation.

drifting-snow

display_name: drifting-snow

large-eddy-simulations

display_name: large-eddy-simulations

mixed-grain-transport

display_name: mixed-grain-transport

saltation

display_name: saltation

snow-cohesion

display_name: snow-cohesion

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Jürg Schweizer

en: avalanche-size avalanche-forcasting avalanche-activity danger-level snow-avalanche

en: Avalanche activity data

en: This data file includes data on the avalanche activity per day aggregated from the avalanche data.

en: Snow avalanche data

en: This data file includes data on the avalanches mapped in the region of Davos.

en: Readme

en: The Readme file contains the description of the two data files.

en:
These data include all avalanches that were mapped in the region of Davos, Switzerland during the winters 1998-1999 to 2018-2019 (21 years), in total 13,918 avalanches, and the corresponding forecast danger level valid on the day of avalanche occurrence, 3533 days and danger ratings in total.

This avalanche activity data set was analysed and results published by Schweizer et al. (2020). They found that the
number of avalanches per day strongly increased with increasing danger level, but avalanche size was poorly related to avalanche danger level.

The data are provided in two files: the first includes the avalanche data (13,918 records); the second includes the avalanche activity per day (3533 records).
Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Schweizer, J., Mitterer, C., Techel, F., Stoffel, A. and Reuter, B., 2020. On the relation between avalanche occurrence and avalanche danger level. The Cryosphere, 14, 737-750, https://doi.org/10.5194/tc-14-737-2020.

avalanche-activity

display_name: avalanche-activity

avalanche-forcasting

display_name: avalanche-forcasting

avalanche-size

display_name: avalanche-size

danger-level

display_name: danger-level

snow-avalanche

display_name: snow-avalanche

en: Snow avalanche data Davos, Switzerland, 1999-2019


en: land-change urban-landscape concur landscape-planning urban-planning

en:
Book of abstracts from the virtual conference "From Plans to Land Change: Dynamics of Urban Regions"

Cities and urban regions are among the most dynamic land-use systems in the world, with dramatic consequences for the provision of ecosystem services and the livelihood of people. Planning is a multifaceted activity with extensive experience in the management of these urbanization processes. However, our understanding of planning’s contribution to shaping urban land use, form and structure is still incomplete, with serious consequences for the efficacy of urban planning and land change models.

This international conference aims to bring together the community of scholars working on planning evaluation and urban modelling. The participants are offered the opportunity to present their current research and to discuss how theoretical developments, data sources, comparative studies and modelling approaches might advance the field.

The conference was financially supported by the CONCUR project and sustained by Swiss Federal Research Institute WSL.

concur

display_name: concur

land-change

display_name: land-change

landscape-planning

display_name: landscape-planning

urban-landscape

display_name: urban-landscape

urban-planning

display_name: urban-planning

en: From Plans to Land Change: Dynamics of Urban Regions. Book of Abstracts


maintainer: Paraskevi Georgakaki

en: swiss-alps ice-water-content wrf ice-crystal-number-concentration liquid-water-content blowing-snow secondary-ice-production jungfraujoch

en: WRF outputs

en:
The .zip file contains all the NetCDF outputs produced by the mesoscale Weather Research and Forecasting (WRF) model (version: 4.0.1). Two case studies were simulated in this study, between 25-28 January 2014 (00:00 UTC) and 29 January - 1 February 2014 (00:00 UTC), respectively. The former is denoted as "NW" and the latter as "SE", owing to the prevailing wind conditions at the Jungfraujoch (JFJ) station.

The outputs come from the innermost domain of the simulations with a spatial resolution of 1 km and are extracted from the nearest to JFJ model grid point (46.55°N 7.98°E). The dimensions of each model variable is [145,100], which corresponds to time and height, respectively. The frequency of the outputs is 30 min. Note that the first 24 hours of each simulation (i.e., the first 48 outputs) were considered spin up time.

The following sets of sensitivity simulations were presented in this study:

* CNTRL_NW.nc, CNTRL_SE.nc : Sensitivity simulations performed with the default version of WRF
* DS_PHILL_NW.nc, DS_PHILL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Phillips et al. (2018)
* DS_SULL_NW.nc, DS_SULL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Sullivan et al. (2018)
* PHILL_NW.nc, PHILL_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Phillips et al. (2017)
* TAKAH_NW.nc, TAKAH_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Sullivan et al. (2018) based on Takahashi et al. (1995)
* TAKAHrim_NW.nc, TAKAHrim_SE.nc : Same set-up as before but applied only to collisions between rimed ice particles
* BIPS_Xk0_DY_NW.nc, BIPS_Xk0_DY_SE.nc : Sensitivity simulations including a source of Xk0 (either 10.0 or 100.0 L⁻¹) ice crystals with sizes of DY (either 10 or 100 μm) in the first atmospheric level of the model
* BIPS100_PHILL_NW.nc, BIPS100_PHILL_SE.nc : Sensitivity simulations where the combined effect of blowing snow and ice-ice collisional break-up is examined

en: Observational data

en:
The .zip file contains 6 .csv files including all microphysical measurements taken at the Jungfraujoch station during the two periods of interest:

* 25-28 January 2014 : northwesterly-winds (NW)
* 29 January - 1 February 2014 : southeasterly-winds (SE)

The total Ice Crystal Number Concentration (ICNC; reported in L⁻¹) is measured by the two-dimensional stereo hydrometeor spectrometer (2D-S; Lawson et al., 2006) over the size range 10-1280 μm. The total ice water content (IWC; reported in gm⁻³) is also derived by the 2D-S data using the Brown and Francis (1995) mass-diameter relationship. Finally, the quantification of the liquid water content (LWC; reported in gm⁻³) is based on the liquid droplet size distribution data derived from a DMT cloud droplet probe (CDP; Lance et al., 2010) over the size range 2-50 μm. The frequency of the measurements in the .csv files is 30 min, to match the output frequency of the model. Datetime is also reported in the files (DD/MM/YYYY h:mm) in UTC.

Acknowledgment: Collection and pre-processing of the microphysical measurements has been performed by Gary Lloyd (gary.lloyd@manchester.ac.uk). More details about the instrumentation during the CLACE2014 campaign can be found in Lloyd et al. (2015).

en:
This repository contains all WRF model outputs and observational data sets used for the paper:
Georgakaki, P., Sotiropoulou, G., Vignon, É., Billault-Roux, A.-C., Berne, A., and Nenes, A.: Secondary ice production processes in wintertime alpine mixed-phase clouds, Atmos. Chem. Phys. Discuss., https://doi.org/10.5194/acp-2021-760, in review, 2021.

blowing-snow

display_name: blowing-snow

ice-crystal-number-concentration

display_name: ice-crystal-number-concentration

ice-water-content

display_name: ice-water-content

jungfraujoch

display_name: jungfraujoch

liquid-water-content

display_name: liquid-water-content

secondary-ice-production

display_name: secondary-ice-production

swiss-alps

display_name: swiss-alps

wrf

display_name: wrf

en: Data for the publication "Secondary ice production processes in wintertime alpine mixed-phase clouds"