en: restoration soil topsoil-removal biodiversity grassland bacteria soil-biodiversity nematodes soil-chemistry fungi soil-biology plants

en: Distance to target results

en:
Community	biotic community (vegetation, nematoda, fungi, prokaryota)
Treatment	Treatment groups; Y.4-30= restored grasslands (time since restoration); Initial=intensively managed grasslands (I)
Comparison	within- or between-community Bray-Curtis dissimilarity distance comparison
Label	within-community distances of initial/restored grasslands: treatment abbreviation; between-communities distances of initial/restored-to-target grasslands: treatment abbreviation plus Target (T; species-rich grasslands)
mean	Mean distance to Target (6 plots per treatment group)
sd	Standard deviation of distances to Target (6 plots per treatment group)

en: Vegetation data

en:
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)
column I-LW	Plant abundance per species (in total 327 plant species) expressed as cover percentage estimation according to van der Maarel (vdM 1979; 7 classes: 1-7); nomenclature according to Lauber & Wagner (1996)

en: Soil properties

en:
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)
N.pool	Soil nitrogen pool (June 2017); corrected for bulk density and 12 cm sampling depth [kg ha-1 12cm-1]
Corg.pool	Soil organic carbon pool (June 2017); corrected for bulk density and 12 cm sampling depth [kg ha-1 12cm-1]
pH	soil pH [CaCl2]
BD	Bulk density [g cm-3]
FC	Field capacity [%]
Veg.1	principle coordinate axis 1 (vegetation)
Veg.1	principle coordinate axis 2 (vegetation)
Nem.1	principle coordinate axis 1 (nematoda)
Nem.2	principle coordinate axis 2 (nematoda)
Fun.1	principle coordinate axis 1 (fungi)
Fun.2	principle coordinate axis 2 (fungi)
Prok.1	principle coordinate axis 1 (prokaryota)
Prok.2	principle coordinate axis 2 (prokaryota)
Veg.H	Shannon diversity (vegetation)
Nem.H	Shannon diversity (nematoda)
Fun.H	Shannon diversity (fungi)
Prok.H	Shannon diversity (prokaryota)

en: Fungi data

en:
Sample.data
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)

Taxonomy
OTU.ID	consecutive numbers for operational taxonomic units (OTUe 1-7794)
Taxonomic rank	Domain, Phylum, Class, Order, Family, Genus, Species

Abundance
columns	Plot.ID (see Sample.data)
rows	OTU.ID (see Taxonomy)

en: Nematode data

en:
Sample.data
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)

Taxonomy
ASV.ID	unit number.letter code per amplicon sequence variant (in total 904)
Taxonomic rank	Phylum, Class, Order, Family, Genus, Species

Abundance
columns	Plot.ID (see Sample.data)
rows	ASV.ID (see Taxonomy)

en: Ecosystem coupling_interactions

en:
Treatment	Treatment groups; Y.4-18 = restored grasslands; Initial = intensively managed grasslands; Target = species-rich semi-wet to semi-dry grasslands
Type	Interactions type; A.A = abiotic.abiotic; A.B = abiotic.biotic; B.B = biotic.biotic
Correlation	non-parametric Spearman rank correlations between biotic and abiotic parameters (ecological interactions)

en: Networks

en:
Treatment	Treatment groups; Y.4-18 = restored grasslands; Initial = intensively managed grasslands; Target = species-rich semi-wet to semi-dry grasslands
Correlation	non-parametric Spearman rank correlations
Vertex.1+2	Comparison between network components; N.pool = total soil nitrogen pool [kg ha-1 12 cm-1]; Corg.pool = soil organic carbon pool [kg ha-1 12 cm-1], pH = soil pH [CaCl2]; BD = bulk density [g cm-3]; FC = field capacity [%]
	PCoA 1 + 2 biotic communities [Veg = vegetation; Nem = nematoda; Fun = fungi; Prok = prokaryota]
Type	Interactions type; A.A = abiotic.abiotic; A.B = abiotic.biotic; B.B = biotic.biotic

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Resch, M.C., Schütz, M., Ochoa-Hueso, R., Buchmann, N., Frey, B., Graf, U., van der Putten, W.H., Zimmermann, S., Risch, A.C. (in review). Long-term recovery of above- and belowground interactions in restored grassland after topsoil removal and seed addition. Journal of Applied Ecology_

Please cite this paper together with the citation for the datafile.

Study area and experimental design
The study was conducted in and around two nature reserves, Eigental and Altläufe der Glatt, which were located approximately 5 km apart (47°27´ to 47°29´ N, 8°37´ to 8°32´ E, 417 to 572 m a.s.l., Canton of Zurich, Switzerland; Figure S1 and S2, Table S1). Mean annual temperature and precipitation are 9.8 ± 0.6 °C and 990 ± 168 mm (Kloten climate station 1988-2018; MeteoSchweiz, 2019). TFor this study, we used a space-for-time approach based on eight restoration sites that were between 3 and 32 years old. We measured recovery and restoration success by comparing the restored grasslands with intensively managed and semi-natural grasslands. Using a space-for-time approach requires high similarities in historical properties of the site, such as soil conditions and management regimes, to assure that temporal processes are appropriately represented by spatial patterns (Walker et al., 2010). This was the case in our study. The restored sites had similar soil conditions (i.e., soil type, structure, water availability) as the targeted semi-natural grasslands, while they shared the same agricultural legacy with intensively managed grasslands, i.e., biomass harvest and fertilization (manure and/or slurry) three to five times a year as well as tillage. We randomly established three 5 m x 5 m (25-m2) plots for plant identification and three 2 m x 2 m (4-m2) subplots for soil biotic and abiotic data collection at least 2 m away from the 25-m2 plots in each restoration site. Sites of similar age were grouped into four age classes: Y.4 (3 & 4 years after restoration), Y.18 (17 & 19 years), Y.24 (23 & 25 years), and Y.30 (27 & 32 years). Six intensively managed (Initial) and six semi-natural grassland (Target) sites complemented the experimental set-up, for a total of 36 plots. All plots were sampled under similar conditions, i.e., day of the year, air temperature, soil moisture, and time since last rain event, in June/July 2017 (intensively managed and semi-natural plots) and 2018 (restored plots).

Collection of plants and selected soil biota data
Plant species cover (in %) was visually estimated in each 25-m2 plot in mid-June (Braun-Blanquet, 1964; nomenclature: Lauber & Wagner, 1996). We calculated Shannon diversity and assessed plant community structure. We included soil microbial (fungi, procaryotes) and nematodes in our study as they represent the majority of soil biotic diversity and abundance (Bardgett & van der Putten, 2014), cover various trophic levels of the soil food web (Bongers & Ferris, 1999), and play key roles in soil functioning and ecosystem processes (Bardgett & van der Putten, 2014). In particular, soil nematodes were found to be well suited belowground indicators to evaluate recovery/development after restoration (e.g. Frouz, et al. 2008; Kardol et al., 2009; Resch et al., 2019). We randomly collected ten soil cores (2.2 cm diameter x 12 cm depths; sampler from Giddings Machine Company, Windsor, USA) in the 4-m2 subplots to assess soil nematode and microbial (fungal, prokaryotic) diversities and community structures. For soil nematodes, eight of the soil cores were combined and gently homogenized, placed in coolers and stored at 4 °C and transported to the laboratory (Netherlands Institute of Ecology, NIOO, Wageningen, Netherlands) within three days after collection. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriators (Oostenbrink, 1960). After extraction, each sample was divided into three subsamples, two for molecular identification and one to determine nematode abundance (see Resch et al., 2019). For the molecular work, two subsamples were stored in 70% ethanol (final volume 10 mL each) and transported to the laboratory at the Swiss Federal Research Institute WSL (Birmensdorf, Switzerland). Each subsample was reduced to roughly 200 μL by centrifugation and removal of the supernatant. The remaining ethanol was vaporized (65 °C for 3 h). Thereafter, 180 μL ATL buffer solution (Qiagen, Hilden, Germany) was immediately added and samples were stored at 4 °C until further processing. From these samples, nematode metagenomic DNA was extracted using the DNeasy Blood & Tissue Kit (Qiagen, Hilden, Germany) according to the manufacturer`s protocol, except for the incubation step which was run at 56 °C for 4 h. PCR amplification of the V6-V8 region of the eukaryotic small-subunit (18S) was performed with 7.5 μL of genomic DNA template (ca. 1 ng/μL) in 25 μL reactions containing 5 μL PCR reaction buffer, 2.5 mM MgCL2, 0.2 mM dNTPs, 0.8 μM of each primer (NemF: Sapkota & Nicolaisen, 2015; 18Sr2b: Porazinska et al., 2009), 0.5 μL BSA, and 0.25 μL GoTaq G2 Hot Start Polymerase (Promega Corporation, Madison, USA). Amplification was using an initial DNA denaturation step of 95 °C for 2 min, followed by 35 cycles at 94 °C for 40 sec, 58 °C for 40 sec, 72 °C for 1 min, and a final elongation step at 72 °C for 10 min. Filtering, dereplication, sample inference, chimera identification, and merging of paired-end reads was implemented using the DADA2 pipeline (v.1.12; Callahan et al., 2016) to finally assign amplicon sequence variants (ASVs) as taxonomic units.
We combined and homogenized the remaining two soil cores to assess soil microbes, placed them in coolers (4 °C) and transported them to the laboratory at WSL. Metagenomic DNA was extracted from 8 g sieved soil (2 mm) using the DNAeasy PowerMax Soil Kit (Qiagen, Hilden, Germany) according to the manufacturer´s protocol. PCR amplification of the V3-V4 region of the small-subunit (16S) of prokaryotes (i.e., bacteria and archaea) and the ribosomal internal transcribed spacer region (ITS2) of fungi was performed with 1 ng of template DNA using PCR primers and conditions as previously described (Frey et al., 2016). PCRs were run in triplicates, pooled and sent to the Genome Quebec Innovation Centre (Montreal, QC, Canada) for barcoding using the Fluidigm Access Array technology (Fluidigm) and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, USA). Quality filtering, clustering into operational taxonomic units (OTUs, 97% similarity cutoffs) and taxonomic assignment were performed as previously described (Resch et al., 2021).Taxonomic classification of nematode, prokaryotic and fungal sequences was conducted querying against the most recent versions of PR2 (v.4.11.1; Guillou et al., 2013), SILVA (v.132; Quast et al., 2013), and UNITE (v.8; Nilsson et al., 2019) reference sequence databases. Taxonomic assignment cutoffs were set to confidence rankings ≥ 0.8 (below ranked as unclassified). Prokaryotic OTUs assigned to mitochondria or chloroplasts as well as OTUs or ASVs assigned to other than Fungi or Nematoda were manually removed prior to data analysis. The three datasets were filtered to discard singletons and doubletons. Taxonomic abundance matrices were rarefied to the lowest number of sequences per community to achieve parity of the total number of reads between samples (Prokaryotes: 10,929 reads; Fungi: 18,337 reads; Nematodes: 6,662 reads). We calculated Shannon diversity and assessed community structures for soil nematodes, prokaryotes and fungi based on their relative abundances of ASV or OTU at the taxon level.

Collection of soil physical and chemical properties
We randomly collected one undisturbed soil core (5 cm diameter, 12 cm depth) per 4-m2 subplot using a steel cylinder that fit into the soil corer. The cylinders were capped to avoid disturbance during transport and used to measure field capacity, rock content and fine earth density as previously described (Resch et al., 2021). We randomly collected another three soil cores (5 cm diameter, 12 cm depths) in each 4-m2 subplot to determine soil chemical properties. The cores were pooled, dried at 60 °C for 48 h and passed through a 2 mm sieve. We measured soil pH (CaCl2) on dried samples, total nitrogen (N) and organic carbon (C) concentration on dried and fine-ground samples (≤ 0.5 mm; for details see Resch et al., 2021). We calculated total N and organic C pools after correcting its concentration for soil depth, rock content and fine earth density.

bacteria

display_name: bacteria

fungi

display_name: fungi

grassland

display_name: grassland

nematodes

display_name: nematodes

plants

display_name: plants

restoration

display_name: restoration

soil

display_name: soil

soil-biodiversity

display_name: soil-biodiversity

soil-biology

display_name: soil-biology

soil-chemistry

display_name: soil-chemistry

topsoil-removal

display_name: topsoil-removal

en: Long-term recovery of above-and belowground interactions in restored grasslands


maintainer: EnviDat Support

en: electrodermal-activity place-attachment landscape urban-ecology sense-of-place

state: active

type: dataset

en: 01. EDA Processed Data

media_type: application/zip

format: ZIP

en: 02. Questionnaire Data

en: 03. Publication Ready Data

en: 05. Visuals

en: 00. EDA Raw Data

en: 04. Scripts

en: This repository contains data on EDA measurements of visitors with different cultural backgrounds in virtual urban park settings. The parks are a Persian garden (Shiraz, Iran) and a historical park in Zurich, Switzerland. The cultural background of the visitors is Persian and Central European. The repository contains raw data from EDA, processed time series and statistical procedures.

electrodermal-activity

display_name: electrodermal-activity

landscape

display_name: landscape

place-attachment

display_name: place-attachment

sense-of-place

display_name: sense-of-place

urban-ecology

display_name: urban-ecology

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Electrodermal Activity (EDA) of Bi-cultural Visitors In Virtual Park Settings


maintainer: Nander Wever

en: longwave-radiation precipitation-amount shortwave-radiation wind-speed snow-depth wind-direction air-temperature snow-ice-temperature humidity

en: SNOWPACK sno file

en: This sno-file can be used to run SNOWPACK simulations with the WFJ data set, using version 3.4.0 or higher.

format: SERVICE

en: SNOWPACK ini file (new syntax)

en: This ini-file can be used to run SNOWPACK simulations with the WFJ data set, using the new MeteoIO Filter, Generator and Interpolation syntax.

en: SNOWPACK ini file (old syntax)

en: This ini-file can be used to run SNOWPACK simulations with the WFJ data set, using version 3.4.0 or higher.

en: Version 7 (current)

en:
Release notes:

Bug fix: in previous versions, snow lysimeter data from September 2010 onwards was erroneously reported for UTC+2, instead of UTC+1 (i.e., reported one hour later than should have been).

Update: dataset extended to 2017-07-11T00:30.

en: Undercatch correction

media_type: application/pdf

en: This document describes how the undercatch correction for the Weissfluhjoch measurement site was determined.

format: PDF

mimetype: application/pdf

en: Version 2

en:
Deprecated version. Release notes:

Bug fix: in v1, incoming radiation components were taken from WFJ_Gipfel station, instead of WFJ Versuchsfeld.

en: Version 6

en:
Deprecated version.

Release notes:

- Missing ISWR for 2009-09-30 and 2010-04-30 has been replaced by data from WFJ Gipfel

This dataset is the basis for the Weissfluhjoch dataset in ESM-SnowMIP (doi: http://dx.doi.org/10.16904/16).

en: Version 1

en:
Deprecated version. Release notes:

First release of dataset.

en: All versions

en: Version 5

en:
Deprecated version. Release notes:

Update: using the incoming and outgoing short- and longwave radiation data from the new processing chain from 2010 onwards, filling also data gaps in pre-2010 data.

Update: dataset extended to 2016-10-04T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: Version 3

en:
Deprecated version. Release notes:

Bug fix: in version 2, the undercatch correction was not applied correctly

Bug fix: in version 2, snow lysimeter data was missing for extended periods of time

Update: dataset extended to 2016-01-02T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: Version 4

en:
Deprecated version. Release notes:

Update: dataset extended to 2016-09-02T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en:
Dataset of meteorological and snowpack measurements from the automatic weather station at Weissfluhjoch, Davos, Switzerland, suitable for driving snowpack models. The dataset contains standard meteorological measurements, and additionally snowpack runoff data from a snow lysimeter. Where possible, data is quality checked and missing data are replaced from backup sensors from the measurement site itself, or (in only a few cases) from the MeteoSwiss weather station at 470 m distance and 150 m above the measurement site.

Publication
Wever, N., Schmid, L., Heilig, A., Eisen, O., Fierz, C., and Lehning, M. Verification of the multi-layer SNOWPACK model with different water transport schemes. 2015. The Cryosphere. Volume 9. 2271-2293. http://dx.doi.org/10.5194/tc-9-2271-2015.

air-temperature

display_name: air-temperature

humidity

display_name: humidity

longwave-radiation

display_name: longwave-radiation

precipitation-amount

display_name: precipitation-amount

shortwave-radiation

display_name: shortwave-radiation

snow-depth

display_name: snow-depth

snow-ice-temperature

display_name: snow-ice-temperature

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

en: WFJ_MOD: Meteorological and snowpack measurements from Weissfluhjoch, Davos, Switzerland


en: number-of-caught-persons avalanche-accident-statistics avalanche-fatalities number-of-dead-persons avalanche-accidents

en: Fatal avalanche accidents in Switzerland since 1995-1996

media_type: text/csv

format: CSV

mimetype: text/csv

en:
Attention: this data is not updated after 2022 anymore.
This data collection contains information concerning all accidents by snow avalanches causing at least one fatality in Switzerland. The data set commences on 01/10/1995. After the completion of a hydrological year, the new data is added.
The following information is provided:
 * avalanche identifier
 * date of the accident
 * accuracy of the date in range of days before and after
 * canton
 * name of the locality
 * start zone of the avalanche
  * coordinates (Swiss coordinate system, approximately in middle of start zone)
  * accuracy of the coordinates in meters
 * elevation (in meteres above sea level, app. in middle of start zone)
 * slope aspect (main orientation of start zone)
 * slope inclination (in degree, steepest point within start zone)
 * number of dead persons
 * number of caught persons
 * number of fully buried persons
 * forecasted avalanche danger level
 * activity/location of the accident party at the time of the incident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

number-of-caught-persons

display_name: number-of-caught-persons

number-of-dead-persons

display_name: number-of-dead-persons

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Matthias Haeni

en: meteo temperature long-term par meteorology relative-humidity swiss-forest-lab wind-speed precipitation climate-change

en: Site aerial photo (Nationalpark)

en: Site aerial photo from both Nationalpark stations. Source: Google. 2016. Site aerial photo from both Nationalpark stations. Retrieved November 11, 2016, from https://www.google.ch/maps

mimetype: image/jpeg

en: Site photo of the field station (NAF)

en: Site photo of the field station form the side.

en: Site photo of the forest station (NAB)

en: Site photo of the forest station from the side.

en: Forest station data (NAB)

en: Data file.

en: Data plot of the field station (NAF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Field station data (NAF)

en: Data plot of the forest station (NAB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Nationalpark in Switzerland where one station is located within a natural coniferous forest stand (NAB) with mountain pine (_Pinus mugo_; 210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Nationalpark is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

en: Nationalpark, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Robert Pazúr

en: sentinel-2 habitat cropland agriculture vegetation-indices switzerland phenology grassland machine-learning remote-sensing

en: Cropland, grassland, and shrubland map of Switzerland (v1.0)

media_type: image/tiff

en: !!! Please check out the newer version in this repository !!! (1) cropland; (2) grassland; (3) shrubland; other LC classes are masked out from the map

format: TIFF

en: GEE (Google Earth Engine) script (JavaScript) to derived the output map  (v1.5)

en: The code used in Google Earth Engine to derive the cropland, grassland and shrubland map of Switzerland. Compare to the previous version the newer version includes the shadow masking procedure which might be important in the mountainous areas.

en: (current version) Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.7 (v1.5)

format: GeoTIFF

en: Cropland and grassland map of Switzerland  (v.1.0)

en: !!! Please check out the newer version in this repository !!! (1) cropland; (2) grassland; other LC classes are masked out from the map

en: Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.6  (v1.0)

en:
!!! Please check out the newer version in the repository !!!
Mask of unsealed surfaces of Switzerland based on 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.6

en: Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.7 (v1.0)

en: !!! Please check out the newer version in this repository !!! Assuming that sealed surfaces have little or no phenological response we calculated a mask of unsealed surfaces based on the 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.7.

en: (current version) Cropland and grassland map of Switzerland (v.1.5)

en: GEE (Google Earth Engine) script (JavaScript) to derived the output map  (v1.0)

en: !!! Please check out the newer version in the repository !!! The code used in Google Earth Engine to derive the cropland, grassland and shrubland map of Switzerland

en: (current version) Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.6 (v1.5)

en: Assuming that sealed surfaces have little or no phenological response we calculated a mask of unsealed surfaces based on the 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.6.

en: (current version) Cropland, grassland, and shrubland map of Switzerland (v.1.5)

en: We developed a map of cropland and grassland allocation for Switzerland based on several indices dominantly derived from Sentinel-2 satellite imagery captured over multiple growing seasons. The classification model was trained based on parcel-based data derived from landholder reporting. The mapping was conducted on Google Earth Engine platform using random forest classifier. Areas of high vegetation, shrubland, sealed surface and non-vegetated areas were masked out from the country-wide map. The resulting map has high accuracy in lowlands as well as mountainous areas.

agriculture

display_name: agriculture

cropland

display_name: cropland

grassland

display_name: grassland

habitat

display_name: habitat

machine-learning

display_name: machine-learning

phenology

display_name: phenology

remote-sensing

display_name: remote-sensing

switzerland

display_name: switzerland

vegetation-indices

display_name: vegetation-indices

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Cropland and grassland map of Switzerland based on Sentinel-2 data


en: European Snow Booklet unpublished metadata

en: The entire station metadata of all European institutions that contributed data is stored in METADATA_unpublished.xlsx. This file, however, cannot be accessed, since not all institutions gave permission to publish their station metadata. If you wish to access the metadata, please send a request to marty@slf.ch stating clearly why you want to access these metadata. NOTE: in this file ONLY station metadata (Lat/Lon/Altitude) is given, NO measured snow depth data.

format: XLS

en: COST European Snow Booklet (ESB) - DORA Link

media_type: text/html

en: DORA Link of the COST European Snow Booklet (ESB).

format: HTML

en: COST European Snow Booklet (ESB)

en: Please find here the web version of the COST European Snow Booklet (ESB).

en: European Snow Booklet public metadata

en:
The core of the European Snow Booklet (ESB), the country reports of 38 European countries, are based on information and metadata on snow measurements collected through a comprehensive survey, the ESB Questionnaire, between August 2017 and March 2018. The station metadata (for example location, elevation, measurement start date) from each country was provided by one or several institutions responsible for snow observations. By answering the questionnaire the contacts agreed that the information and metadata provided could be presented in the ESB. For cases where institutions indicated that information on station locations could be made publicly available, the metadata for the variables snow depth (HS), depth of snowfall (HN) and water equivalent of the snow cover (SWE), is additionally provided here for download (METADATA.xlsx).
Please note that not all institutions gave permission to publish their station metadata. This metadata has to be requested from the non-personal institution contacts provided in the METADATA.xlsx file. In some cases, however, no institutional contact is available and thus the contact of the country representative who filled in the questionnaire is used.
For current, updated station metadata we refer to the (non-personal) institutional contacts provided in METADATA.xlsx and/or the institution webpages. Note, however, that we cannot guarantee for completeness of the dataset for all countries because operational networks are prone to changes.

en: List of authors and list of the editorial board of the European Snow Booklet

en:
Here you can find the list of all lead authors of the different chapters of the European Snow Booklet (ESB).
In addition a list of the editorial board that reviewed the ESB is given.

en:
The European Snow Booklet (ESB) is a book of reference for snow measurements that has been produced through collaboration with many European snow practitioners and snow scientists in the framework of the European Cooperation in Science and Technology (COST) Action ES1404 “A European network for a harmonised monitoring of snow for the benefit of climate change scenarios, hydrology and numerical weather prediction (HarmoSnow)”. The ESB provides a unique collection of information about operational snow observations in the European countries and the methods used to perform basic measurements of snow on the ground: snow depth (HS), depth of snowfall (HN), water equivalent of the snow cover (SWE) and presence of snow on the ground (PSG). Information and station metadata (for example location, elevation) for these basic snow variables were collected through a comprehensive survey, the ESB questionnaire between August 2017 and March 2018. Numerous institutions of 38 European countries provided detailed information describing the status of the operational snow observations and the methods used at the time of the survey. Based on the information provided, a country report was written for each European country. Similarities and differences among the countries, that is, the choice of snow variables to be measured, the measurement principles applied, the number of stations, or the spatial and elevational station distribution are pointed out. Thus the collection of country reports demonstrates the relevance of snow measurements for each country. Thus, the intention of the ESB is to foster better knowledge transfer regarding snow measurements between the snow science and operational communities and to improve the communication of information to the general public.

For detailed information on the European countries, we refer to the ESB, which can be downloaded here (envidat.ch). Please note that the ESB is not a living document and information and station metadata are from August 2017 till March 2018, except for Latvia (metadata updated in December 2018).

depth-of-snowfall

display_name: depth-of-snowfall

harmonisation-of-snow-measurements

display_name: harmonisation-of-snow-measurements

snow-depth

display_name: snow-depth

snow-measurement-methods

display_name: snow-measurement-methods

water-equivalent-of-the-snow-cover

display_name: water-equivalent-of-the-snow-cover

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: European Snow Booklet – an Inventory of Snow Measurements in Europe


maintainer: Albrecht von Boetticher

en: barrier-impact-simulation interfoam dberisintermixing natural-hazard hangmuren debris-flow shallow-landslide murgang finite-volumes

en:
This version of debrisInterMixing is based on OpenFOAM Version 4.x and was tested on Ubuntu 18.04.1 LTS.
Please follow the instructions given in ReadMe_debrisInterMixing4.pdf for installation.

mimetype: application/zip

en: These are the installation instructions for debrisInterMixing4

en: Installation Instructions for debrisInterMixing-6

en: debrisInterMixing for OF-Version 6

en:
Here the updated versions of debrisInterMixing are provided for download. The first OpenFoam-compatible Version 2.3.x are available as supplement to v. Boetticher, A., Turowski, J. M., McArdell,W. B., Rickenmann, D., Hürlimann, M., Scheidl, C., and Kirchner, J. W.: DebrisInterMixing-2.3: A Finite Volume solver for three dimensional debris flow simulations based on two calibration parameters. Part two: model validation with experiments. Geoscientific Model Development, 10, 11: 3963-3978. doi: 10.5194/gmd-10-3963-2017.
DebrisInterMixing is a Volume-of-Fluid based Finite Volume code that accounts for shear-thinning sensitive shares of fine sediment suspension together with pressure-sensitive components of the gravel grains within debris flow mixtures. All model properties can be derived from a material sample except for a grid-sensitive calibration parameter.
For more information, please contact albrecht.vonboetticher@wasserbau.ch.

barrier-impact-simulation

display_name: barrier-impact-simulation

dberisintermixing

display_name: dberisintermixing

debris-flow

display_name: debris-flow

finite-volumes

display_name: finite-volumes

hangmuren

display_name: hangmuren

interfoam

display_name: interfoam

murgang

display_name: murgang

natural-hazard

display_name: natural-hazard

shallow-landslide

display_name: shallow-landslide

en: Three-dimensional debris flow simulation tool debrisInterMixing


maintainer: Lyu

en: species-occurrence species-range-map species-richness pinales species-distribution-model fagales

en: Species range maps of species in Fagales and Pinales (with enough occurrences)

en: species_map.zip includes species 1690 range maps generated based on the integrated method described in Lyu et al., (2022). File names with (polygon) indicate that this map is only generated by polygon mapping, as there are not enough occurrences for SDMs.

en: Occurrence maps for species of Fagales and Pinales with few records

en: Point_buffer.zip includes 267 occurrence maps of species that do not have enough occurrence data for polygon mapping.

en:
This database contains 1957 distribution maps of species from Fagales and Pinales constructed based on a method integrating polygon mapping and SDMs (Lyu et al., 2022).
To construct the maps, we first collected occurrence data from 48 different sources. According to the number of occurrences after data cleaning, three kinds of maps are constructed: (1) For species with more than 20 occurrences, we performed SDM and polygon mapping described in Lyu et al. (2022) and select the integration of the two layers as the distribution range; (2) For species with more than 4 but less than 20 occurrences, we only use polygon mapping to draw the distribution range; (3) For species with less than 4 occurrences, a 20-km buffer was generated around the occurrences as the distribution range. The maps were manually checked and evaluated (see Note S3 and Table S9 in Lyu et al., 2022 for details).

fagales

display_name: fagales

pinales

display_name: pinales

species-distribution-model

display_name: species-distribution-model

species-occurrence

display_name: species-occurrence

species-range-map

display_name: species-range-map

species-richness

display_name: species-richness

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Species distribution maps of Fagales and Pinales (GDPlants)


maintainer: Maria Elvira Murazzi

en: 13c-labelling forest-trees polystyrene nanoplastic uptake

en: Nanoplastic in forests experiment

en:
Data embargoed until August 2022, and it will be provided upon request

-  excel file containing: two working sheets (leaf supply and root supply experiment) with a table with the values 13C-nanopolystyrene in the different tissues of the two forest tree species; graph showing the differences between controls and treatments of 13C-nanopolystyrene enrichment for each tissue of each forest tree species; ANOVA table showing significant values after having exposed the tree species to 13C-nanopolystyrene

en:
The fate of plastic in the environment is of global concern, because its production recently has
increased strongly and it accumulates in terrestrial and aquatic ecosystems. Although some knowledge on
its role in aquatic and terrestrial ecosystems was gained in the recent decade, hitherto very little is known
about the impact of micro and nanoplastics in forest ecosystems.

The aim of this pioneering project was to explore if nanoplastics are taken up by forest trees species
through leaves or roots. In greenhouse experiments, we exposed leaves or roots of seedling of two forest
trees species to solutions with highly 13C-labelled polystyrene nanoparticles (13C-nPS, 99 atom%) and
examined if they were incorporated in different above- and belowground tissues.

Treated part of the trees for both species showed significant 13C-enrichment, indicating that trees take up nanoparticles. However, the overall 13C signal strength in tissues that were not exposed to the 13C label remained low (Δδ13C<1‰) and was confined to a few seedlings, leaving it ambiguous whether nanoplastic transport occurs or not.

We acknowledge that the new method developed might be not sensitive enough to unequivocally detect
mechanisms of nanoplastic uptake and transport at environmentally realistic concentrations.

forest-trees

display_name: forest-trees

nanoplastic

display_name: nanoplastic

polystyrene

display_name: polystyrene

uptake

display_name: uptake

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Nanoplastics in forests: Exploring the effects of nanoplastics on forest soils and tree physiology (NanoPlast)


en: strategic-projects land-use-transformations spatial-planning europe urban-transformations strategic-spatial-planning land-use-change large-scale-urban-development-projects

en: QCA R script large-scale urban development projects Europe

en:
For the set up of this R script, we used the “QCA” (Duşa, 2019) and “SetMethods” (Oana and Schneider, 2018) R packages.

The following further resources were also used:
Dusa, A. (2019). QCA with R: A comprehensive resource. Springer: Berlin.
Schneider, C. Q., & Wagemann, C. (2012). Set-theoretic methods for the social sciences. A guide to qualitative comparative analysis. Cambridge: Cambridge University Press.
Thomann, E., Oana, I.-E., & Wittwer, S. (2018). Performing fuzzy- and crisp set QCA with R. A user-oriented beginner's guide. Retrieved from http://www.evathomann.com/links/qca-r-manual

en: QCA data set large-scale urban development projects

media_type: text/plain

en: Please refer to the sections: 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalization in the Metadata for further details on this resource.

format: TXT

mimetype: text/plain

en:
Table of Content: 1. General context of the data set "lsUDPs" ; 2. Background and aims of the study using the data set lsUDPs; 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalisation

1. General context of the data set "lsUDPs"
The data set "lsUDPs" has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2020. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, strategic spatial plans) into quantitative land-change modelling approaches at the urban regional level. The first stage (2016-2017) of the CONCUR project focussed on 21 urban regions in Western Europe. The urban regions were selected through a multi-stage strategy for empirical research (see Hersperger, A. M., Grădinaru, S., Oliveira, E., Pagliarin, S., & Palka, G. (2019). Understanding strategic spatial planning to effectively guide development of urban regions. Cities, 94, 96–105. https://doi.org/10.1016/j.cities.2019.05.032 ).

2. Background and aims of the study using the data set lsUDPs
As part of the CONCUR project, a specific task was to examine the relationship between strategic spatial plans and the formulation and implementation (i.e. urban land change) of large-scale urban development projects in Western Europe.
Strategic urban projects are typically large-scale, prominent urban transformations implemented locally with the aim to stimulate urban growth, for instance in the form of urban renewals of deprived neighborhoods, waterfront renewals and transport infrastructures. While strategic urban projects are referred to in the literature with multiple terms, in the CONCOR project we call them large-scale urban development projects (lsUDPs).
Previous studies acknowledged both local and supra-local (or structural) factors impacting the context-specific implementation of lsUDPs. Local governance factors, such as institutional capacity, coordination among public and private actors and political leadership, intertwine with supra-local conditions, such as state re-scaling processes and devolution of state competencies in spatial planning, de-industrialisation and increasing social inequality. Hence, in implementing lsUDPs, multi-scalar factors act in combination.
Because the formulation and implementation of lsUDPs require multi-scalar coordination among coalitions of public and private actors over an extended period of time, they are generally linked to strategic spatial plans (SSPs). Strategic spatial plans convey collective visions and horizons of action negotiated among public and private actors at the local and/or regional level to steer future urban development, and can contain legally binding dispositions, but also indicative guidelines.
The key question remains as to what extent large-scale urban development projects and strategic spatial plans can be regarded as aligned. By alignment, or “concordance”, we mean that strategic projects are formulated and implemented as part of the strategic planning process (“high concordance”), or that the strategic role of projects is reconfirmed in (subsequent) strategic plans (“moderate concordance”). Lack of concordance is found when lsUDPs have been limitedly (or not at all) acknowledged in strategic spatial plans.
We assume that certain local and supra-local factors, characterising the development of the projects, foster (but not strictly “cause”) the degree of alignment between lsUPDs and SSPs. In this study, we empirically examine how, and to what extent, the concordance between 38 European large-scale urban development projects and strategic plans (outcome: CONCOR) has been enabled by five multi-scalar factors (or conditions): (i) the role of the national state (STATE), (ii) the role of (inter)national private actors (PRIVATE), (iii) the occurrence of supra-regional external events (EVENTS), (iv) the degree of transport connectivity (TRANSP), and (v) local resistance from civil society (RESIST). We adopted a (multi-data) case-based qualitative strategy for empirical research and applied the formalised procedure of within- and cross-case comparison offered by fuzzy-set Qualitative Comparative Analysis appropriate for the goal of this study. Based on set theory, QCA formally integrates contextual sensitivity to case specificities (within-case knowledge) with systematic comparative analysis (across-case knowledge).
The research question the data set has been created to reply to is the following: which conditions, and combinations of conditions, enable the concordance between large-scale urban development projects and strategic spatial plans?
The conditions (“independent variables”) considered are. STATE: the set of large-scale urban projects characterized by a high degree of state intervention and support in their formulation and implementation, PRIVATE: the set of large-scale urban projects characterized by a high degree of involvement of (inter)national private actors in their formulation and implementation, EVENTS: the set of large-scale strategic projects whose formulation and implementation have been strongly affected by unforeseen international events and/or global trends, TRANSP: the set of large-scale strategic projects with a high degree of road and/or transit connectivity, and RESIST: set of large-scale strategic projects whose realization has been characterized by resistances that have substantially delayed or modified the project implementation.
The outcome (“dependent variable”) under analysis is CONCOR: the set of large-scale urban projects having a high degree of concordance/alignment/integration with strategic spatial plans

3. The data set lsUDPs

   3.1 Selection of cases and data collection
To generate the current data set on large-scale urban development projects in European urban regions (data set "lsUDPs"), we identified 35 large-scale urban development projects in a sample of the 21 Western urban regions considered in the CONCUR project (see supra, Hersperger et al. 2019): Amsterdam, Barcelona, Copenhagen, Hamburg, Lyon, Manchester, Milan, Stockholm, Stuttgart. The criteria we followed to identify the 35 large-scale urban development projects are: geographical location, size (large-scale), site (located either in the city core or in the larger urban region) and urban function (e.g. housing, transportation infrastructures, service and knowledge economic functions). Employing these criteria facilitated the selection of diverse large-scale urban development projects while still ensuring sufficient comparability.
In 2016, we performed 47 in-depth interviews with experts in urban and regional planning and large-scale strategic projects and infrastructure (i.e. academics and practitioners) about the formulation, implementation and development (1990s–2010s) of each project in each of the 9 selected urban regions. On average, each interviewee answered questions on 3.1 large-scale urban development projects. Three cases were subdivided into two cases because a clear differentiation between specific implementation stages was identified by the interviewees (expansion of the Barcelona airport, cases “bcn_airport80-90” and “bcn_airport00-16”; realisation of Lyon Part-Dieu, cases “lyo_partdieu70-90” and “lyo_partdieu00-16”; MediaCityUK, cases “man_salfordquays80-00” and “man_mediacityuk00-16”). Therefore, from the initial 35 cases, the final number of analysed cases in the lsUDPs dataset is 38.

    3.2 The data set lsUDPs: Data management and operationalisation
Interviews were fully transcribed and analysed through MAXQDA (version 12.3, VERBI GmbH, Berlin, Germany), and intercoder agreement was evaluated on a sample of nine interviews. We also compiled “synthetic case descriptions” (SCD) for each case (totalling more than 160 SCDs) to spot potential inconsistencies among interviewees’ accounts and to facilitate completion of the “calibration table” for each case (see below). An online expert survey distributed to the interviewees (response rate 78%) helped systematise the information collected during the interviews. We also consulted both academic and gray literature on the case studies to check for possible ambiguity and inconsistencies in the interview data, and to solve discrepancies between our assigned set membership scores and questionnaire values. Site visits were also carried out to retrieve additional information on the selected cases.
For each case (i.e. each of the 38 selected large-scale urban development projects), we operationalised each condition (i.e. STATE, PRIVATE, EVENTS, TRANSP, RESIST) and the outcome (CONCOR) in terms of sets, for subsequent application of Qualitative Comparative Analysis. This process is called “calibration”; we used a number of indicators for each condition to qualitatively assess each large-scale project across the conditions. The case-based qualitative assessment was then transformed into fuzzy-set membership values. Fuzzy-set membership values range from 0 to 1, and should be conceived as “fundamentally interpretative tools” that “operationalize theoretical concepts in a way that enhances the dialogue between ideas and evidence” (Ragin 2000:162, in “Fuzzy-set Social Science”. Chicago: University Press). We employed a four-value fuzzy-set scale (0, 0.33, 0.67, 1) to “quantify” into set membership scores the individual histories of cases retrieved from interview data. Only the condition TRANSP was calibrated as a crisp-set (0, 1).
The translation of qualitative case-based information into numerical fuzzy-set membership values was iteratively performed by populating a calibration table following standard practices recently emerged in QCA when dealing with qualitative (interview) data.

europe

display_name: europe

land-use-change

display_name: land-use-change

land-use-transformations

display_name: land-use-transformations

large-scale-urban-development-projects

display_name: large-scale-urban-development-projects

spatial-planning

display_name: spatial-planning

strategic-projects

display_name: strategic-projects

strategic-spatial-planning

display_name: strategic-spatial-planning

urban-transformations

display_name: urban-transformations

en: lsUDPS Large-scale urban development projects in European urban regions


dischmex-meteorological-measurements

maintainer: Rebecca Mott

title_for_slug: dischmex-meteorological-measurements

en: meteorological-data meteo-station dischmex dischma meteorological-measurements

en: Meteorological measurement 2014

en: data

en: Meteorological measurement 2015

en: Location of the meteorological stations

en: Meteorological measurements 2014

en: Overview sensors

en: Meteorological measurements 2016

en:
Meteorological measurements recorded in the Dischma valley from 2014-2016. In 2014 and 2015 we used 11 mobile weather stations from sensorscope to record meteorological parameter in the upper Dischma valley in the closer surroundings of the Gletschboden area. The meteorological stations are eqiupped with at least air temperature/humidity, wind velocity and wind direction sensors. Some stations are additionally equipped with precipitation, shortwave radiation and snow surface temperature sensors.
Three transects were installed at different aspects and were equipped with air temperature/humidity and wind sensors. Transect 1 (stations 2-4) provides meteorological Information on an east-north-east facing slope at elevations ranging between 2100 m and 2500 m. Transect 2 (stations 5-7) provides meteorological Information on a south-west slope and transect 3 (stations 8-10) on a north-west slope. Station 1 is fully equipped with meteorological sensors (temperature/humidity, wind, IR, up and downwand shortwave radiation and precipitation).
In 2016, mobile stations from sensorscope were replaced with six permanent meteorological stations. Meteorological stations 1-3 are equipped with an air temperature/humidity sensor, two wind speed sensors, a wind direction sensor and an incoming and outgoing shortwave radiation sensor. Stations 4 and 6 are equipped with an air temperature/humidity sensor and a wind speed/direction sensor. Station 5 is a equipped with an air temperature/humidity sensor, a wind speed/direction sensor, a snow surface temperature sensor, an incoming and outgoing shortwave radiation sensor and an incoming longwave radiation sensor.

dischma

display_name: dischma

dischmex

display_name: dischmex

meteo-station

display_name: meteo-station

meteorological-data

display_name: meteorological-data

meteorological-measurements

display_name: meteorological-measurements

en: DISCHMEX - Meteorological measurements


maintainer: Chunhong Zhao

en: urban-morphology land-use landscape austin land-dynamics

en: Land use dynamics in Austin since 1992

en: The present dataset is part of the published scientific paper Zhao C, Weng Q, Hersperger A M. Characterizing the 3-D urban morphology transformation to understand urban-form dynamics: a case study of Austin, Texas, USA. Landscape and urban planning, 2020, 203:103881. The overall objective of this paper is to understand urban form dynamics in the Austin metropolitan area for the periods 2006–2011 and 2011–2016. The study also aims to understand to what extent the changes in the built environment (in terms of ‘efficient growth’ versus ‘inefficient growth’) from the 1990s to 2016 in the Austin metropolitan area corresponded with ‘compact and efficient growth’ planning policy documents. The UMT distribution can be found in the paper. The area of transitioning UMT was provided in Table 2 and Table 3 can be found in the Appendix of the paper. A protocol was developed to perform the content analysis of the strategic plans and gather the data. The detailed list of protocol items can be found in Appendix B of the paper. This study demonstrates the advantage of applying Lidar data to characterize 3-D urban morphology type (UMT) transition and understand its dynamics, which helps develop a comprehensive understanding of the urbanization process and provides a tool for planning intentions and policies evaluation on urban development over time. The UMT maps can be found in Appendix A of the paper. The Lidar point datasets and the 30 × 30 m National Land Cover Database (NLCD) are the two main data sources of UMT mapping. Lidar datasets were gathered from different projects that had been conducted and collected by state agencies and other organizations between 2007 and 2017. Table A1 in the appendix in the paper shows the accuracies and acquisition parameters of the Lidar projects from 2007 to 2017. Land use/cover dynamics in Austin metropolitan area dataset provides Land use/cover patterns in the years 1992, 2001, 2004, 2006, 2008, 2011, 2013, 2016 with a spatial resolution of 30 meters. Since NLCD 1992 used a different classification system for the urban land classes, we first reclassified the NLCD 1992 using a customized Arcpy package.

austin

display_name: austin

land-dynamics

display_name: land-dynamics

land-use

display_name: land-use

landscape

display_name: landscape

urban-morphology

display_name: urban-morphology

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Land use/cover dynamics in Austin metropolitan area since 1992


wind-crust-formation-snowmicropen-data

title_for_slug: wind-crust-formation-snowmicropen-data

en: snowmicropen wind-packing smp wind-crust snow

en: README

en: Describes the dataset in detail

en: SMP data

en: Links to the dataset

en: Processing scripts

en: Contains the R-scripts used to process the SMPs

en:
This dataset contains the SnowMicroPen (SMP) data from 38 wind tunnel experiments on wind-packing / wind crust formation. These experiments were performed in the winters 2015/16 and 2016/17 and include more than 1000 SMP measurements.

The SMPs are organized per experiment. Each experiment subfolder contains the processed SMP profiles and some additional files.

Please refer to the README for more details on the data. The processing scripts are available for download as well. The scripts are mainly provided as documentation and would need to be adjusted to be used.

This dataset is the basis of the following publication:

Sommer C.G., Lehning M., & Fierz C. (2017). Wind tunnel experiments: Saltation is necessary for wind-packing. Journal of Glaciology, 63(242), 950-958. doi:10.1017/jog.2017.53

smp

display_name: smp

snow

display_name: snow

snowmicropen

display_name: snowmicropen

wind-crust

display_name: wind-crust

wind-packing

display_name: wind-packing

en: Wind crust formation: SnowMicroPen data


disdrometer-data-laret

maintainer: Daniel Wolfensberger

title_for_slug: disdrometer-data-laret

en: precipitation hydrometeors raclets visibility disdrometer

en: Disdrometer Data Laret

en: The zip folder contains one netCDF file per day for Laret from February 7 to March 29 2019 with a temporal resolution of 30 seconds (time in UTC). The naming convention for the files is Laret_YYYYMMDD.nc and the files include the following: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

en:
A laser optical disdrometer (Parsivel² , OTT Hydromet) was used to measure hydrometeors by extinction when passing a laser beam. The instrument can classify eight different kinds of precipitation, including rain, hail, snow, drizzle, and hybrid forms.
The dataset contains information on precipitation amount and type for the period of February 7 to March 29 2019 in Laret.

disdrometer

display_name: disdrometer

hydrometeors

display_name: hydrometeors

precipitation

display_name: precipitation

raclets

display_name: raclets

visibility

display_name: visibility


en: sentinel-2 core geodata time-series video-encoding research-data-management gridded-data raster

en:
Shell script to extract data from the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en:
Shell script to reproduce the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software for working with CORE will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en: View publication in the Digital Object Repository at WSL (DORA)

en: CORE Dataset (80 GB)

en:
DISCLAIMER: CORE is still in development. Interested parties are warmly invited to join common development, to comment, discuss, find bugs, etc.

Acknowledgement: The CORE format was proudly inspired by the Cloud Optimized GeoTIFF ([COG](https://www.cogeo.org/)) format, by considering how to leverage the ability of clients issuing HTTP GET range requests for a time-series of remote sensing and aerial imagery (instead of just one image).

License: The Cloud Optimized Raster Encoding (CORE) specifications are released to the public domain under a Creative Commons 1.0 CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

-----------------------

Summary:
The Cloud Optimized Raster Encoding (CORE) format is being developed for the efficient storage and management of gridded data by applying video encoding algorithms. It is mainly designed for the exchange and preservation of large time series data in environmental data repositories, while in the same time enabling more efficient workflows on the cloud. It can be applied to any large number of similar (in pixel size and image dimensions) raster data layers. CORE is not designed to replace COG but to work together with COG for a collection of many layers (e.g. by offering a fast preview of layers when switching between layers of a time series).

WARNING: Currently only applicable to RGB/Byte imagery. The final CORE specifications may probably be very different from what is written herein or CORE may not ever become productive due to a myriad of reasons (see also 'Major issues to be solved').

With this early public sharing of the format we explicitly support the Open Science agenda, which implies "shifting from the standard practices of publishing research results in scientific publications towards sharing and using all available knowledge at an earlier stage in the research process" (quote from: European Commission, Directorate General for Research and Innovation, 2016. Open innovation, open science, open to the world).

CORE Specifications:

1) a MP4 or WebM video digital multimedia container format (or any future video container playable as HTML video in major browsers)

2) a free to use or open video compression codec such as H.264, VP9, or AV1 (or any future video codec that is open sourced or free to use for end users)

Note: H.264 is currently recommended because of the wide usage with support in all major browsers, fast encoding due to acceleration in hardware (which is currently not the case for AV1 or VP9) and the fact that MPEG LA has allowed the free use for streaming video that is free to the end users. However, please note that H.264 is restricted by patents and its use in proprietary or commercial software requires the payment of royalties to [MPEG LA](https://www.mpegla.com/programs/avc-h-264/). However, when AV1 matures and accelerated hardware encoding becomes available, AV1 is expected to offer 30% to 50% smaller file size in comparison with H.264, while retaining the [same quality](https://trac.ffmpeg.org/wiki/Encode/AV1).

3) the encoding frame rate should be of one frame per second (fps) with each layer segmented in internal tiles, similar to COG, ordered by the main use case when accessing the data: either layer contiguous or tile contiguous;

Note: The internal tile arrangement should support an easy navigation inside the CORE video format, depending on the use case.

4) a CORE file is optimised for streaming with the moov atom at the beginning of the file (e.g. with -movflags faststart) and optional additional optimisations depending on the codec used (e.g. -tune fastdecode -tune zerolatency for H.264)

5) metadata tags inside the moov atom for describing and using geographic image data (that are preferably compatible with the [OGC GeoTIFF standard](https://www.ogc.org/standards/geotiff) or any future standard accepted by the geospatial community) as well as list of original file names corresponding to each CORE layer

6) it needs to encode similar source rasters (such as time series of rasters with the same extent and resolution, or different tiles of the same product; each input raster should be having the same image and pixel size)

7) it provides a mechanism for addressing and requesting overviews (lower resolution data) for a fast display in web browser depending on the map scale (currently external overviews)

Major issues to be solved:

- Internal overviews (similar to COG), by chaining lower resolution videos in the same MP4 container for fast access to overviews first); Currently, overviews are kept as separate files, as external overviews.

- Metadata encoding (how to best encode spatial extent, layer names, and so on, for each of the layer inside the series, which may have a different geographical extent, etc...; Known issues: adding too many tags with FFmpeg which are not part of the standard MP4 moov atom; metadata tags have a limited string length.

- Applicability beyond RGB/Byte datasets; defining a standard way of converting cell values from Int16/UInt16/UInt32/Int32/Float32/Float64/ data types into multi-band Byte values (and reconstructing them back to the original data type within acceptable thresholds)

Example

Notice: The provided CORE (.mp4) examples contain modified Copernicus Sentinel data [2018-2021].

For generating the CORE examples provided, 50 original Sentinel 2 (S-2) TCI data images from an area located inside Switzerland were downloaded from www.copernicus.eu, and then transformed into CORE format using ffmpeg with H.264 encoding using the [x264 library](https://www.videolan.org/developers/x264.html).

For full reproducibility, we provide the original data set and results, as well scripts for data encoding and extraction (see resources).

core

display_name: core

geodata

display_name: geodata

gridded-data

display_name: gridded-data

raster

display_name: raster

research-data-management

display_name: research-data-management

time-series

display_name: time-series

video-encoding

display_name: video-encoding

educ

en: Education, culture and sport


en: decomposition soil-biodiversity wolf bacteria yellowstone carcass fungi detritus carrion biogeochemical-cycling

en:
Site	ID for different carcasses across the Yellowstone Landscape
Location	Sampling location, either under carcass or control plot
Species	Indicating whether carcass was from bison or elk
Gender	Gener of carcass; F = female, M = male, ? = unknown
Lat	Latitude
Long	Longitude
DSK	Days since kill; in days
Soil.N	Soil N concentration (%)
Soil.C	Soil C concentration (%)
Veg.C	Vegetation C concentration (%); dominant grasses sampled
Veg.N	Vegetation N concentration (%); dominant grasses sampled
Veg.CtoN	Vegetation C to N ratio; dominant grasses sampled
Soil.resp	Soil respiration (g m-2 h-1)
soil.temp	Soil temperature (°C)
Soil.moist	Soil moisture (volumentric; %)
CRR	Cotton rotting rate
bacteria.richness	Bacteria richness
bacteria.diversity	Bacteria diverstiy
fungi.richness	Fungi richness
fungi.diversity	Fungi diversity
bacteria.abundance	Bacteria abundance
fungi.abundance	Fungi abundance

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch, A.C., Frossard, A., Schütz, M., Frey, B., Morris, A.W., Bump, J.K. (accepted) Effects of elk and bison carcasses on soil microbial communities and ecosystem functions in Yellowstone, USA. (accepted). Functional Ecology
doi: ...

Methods
Study area and study sites
This study was conducted in YNP’s Northern Range (NR), located in north-western Wyoming and south-western Montana, USA (~44.9163° N, 110.4169° W). The NR expands over ~1000 km2 and features long cold winters and short dry summers. Grasslands and shrublands dominate the NR that is the home of large migratory herds of bison (winter counts 2017: ~3919 individuals; Geremia, Wallen, & White, 2017) and elk (~5349 individuals) as well as their main predators, approximately five packs of wolves with a total of 33 individuals (Smith et al., 2017). As part of a long-term research program within YNP, wolf predation has been studied since their reintroduction in 1995.
For our study, we received ground-truthed coordinates of bison and elk carcasses from winter 2016/17 (November 2016 through April 2017) from the YNP Wolf Project. Between June 20 and July 1, 2017, we visited 24 carcasses in total. At five sites, we could not sample as the carcasses were no longer found. In total we located remains (hairmats, rumen content, bones, teeth) of 19 adult male and female carcasses (7 bison, 12 elk; Supplementary Table 1). Live body weights of adult bison and elk are approximately 730 kg (male bison), 450 kg (female bison), 330 kg (male elk), and 235 kg (female elk, Meagher, 1973; Quimby & Johnson, 1951).
The kills and subsequent consumption happened between 34 and 173 days prior to our sampling (hereafter “days since kill”, DSK), for which we accounted in our statistics. Note that wolves and other scavengers consumed the soft tissue of the carcasses quickly, hence, there is close to no soft tissue left for decomposition as compared to an intact body left on the soil surface. The 19 carcass sites covered the extent of YNP’s NR, with both bison and elk carcasses showing similar distributions; elevation ranged from 1703 to 2884 m a.s.l. (Supplementary Fig 1 & Supplementary Table 1). The carcasses were all located in grassland or sage-brush shrubland, with or without sparsely scattered trees, and both bison and elk carcasses showed the same distribution of DSK. At each study site, we selected a reference plot (hereafter “control”) that was of comparable size, slope aspect and vegetation to the carcass location (hereafter “carcass”). The control was at least 10 m away (Danell, Berteaux, & Brathen, 2002; Melis et al., 2007) from the carcass itself to ensure the absence of potential direct and indirect carcass effects (paired design; (Bump, Webster, et al., 2009; Bump, Peterson, et al., 2009).

Ecosystem functions and soil properties
We randomly collected 50 g of mineral soil from three locations on both control and carcass plots to a depth of 5 cm with sterile techniques and gently mixed the material to obtain a composite sample. Half the soil sample was immediately bagged in plastic bags (whirl packs), stored in a cooler with ice packs (~5 ºC), sieved (2-mm) and frozen within 4-6 hours of collection to assess soil microbial communities. For this purpose, we extracted total genomic DNA from 0.5 g soil using the PowerSoil DNA Isolation Kit (Qiagen, Hilden, Germany). DNA concentrations were measured using PicoGreen (Molecular Probes, Eugene, OR, USA). PCR amplifications of partial bacterial small-subunit ribosomal RNA genes (region V3–V4 of 16S rRNA) and fungal ribosomal internal transcribed spacers (region ITS2) were performed as described previously (Frey et al., 2016). Each sample consisting of 40 ng DNA was amplified in triplicate and pooled before purification with Agencourt AMPure XP beads (Beckman Colter, Berea, CA, USA) and quantified with the Qubit 2.0 fluorometric system (Life Technologies, Paisley, UK). Amplicons were sent to the Genome Quebec Innovation Center (Montreal, Canada) for barcoding using the Fluidigm Access Array technology and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, CA, USA).
Quality control of bacterial and fungal reads was performed using a customized pipeline (Supplementary Table 2; Frey et al., 2016). Paired-ends reads were matched with USEARCH (Edgar & Flyvbjerg, 2015), substitution errors were corrected using Bayeshammer (Nikolenko, Korobeynikov, & Alekseyev, 2013) and PCR primers were trimmed (allowing for 1 mismatch, read length >300 bp for 16S and >200 bp for ITS primers) using Cutadapt (M. Martin, 2011). Sequences were dereplicated and singleton reads removed prior to clustering into operational taxonomic units (OTUs) at 97% identity using USEARCH (Edgar, 2013). The remaining centroid sequences were tested for the presence of ribosomal signatures using Metaxa2 (Bengtsson-Palme et al., 2015) or ITSx (Bengtsson-Palme et al., 2013). Taxonomic assignments of the OTUs were obtained using Bayesian classifier (Wang, Garrity, Tiedje, & Cole, 2007) with a minimum bootstrap support of 60% implemented in mothur (Schloss et al., 2009) by querying the bacterial and fungal reads against the SILVA Release 128 (Quast et al., 2013) and UNITE 8.0 (Abarenkov et al., 2010) reference databases for 16S and ITS OTUs, respectively.
Abundances of the bacterial 16S rRNA gene and fungal ITS amplicon were determined by quantitative real-time PCR (qPCR) on an ABI7500 Fast Real-Time PCR system (Applied Biosystems, Foster City, CA, USA) as described previously (Frossard et al., 2018). The same primers (without barcodes) and cycling conditions as for the sequencing approach were used for the 16S and ITS qPCR. Three standard curves per target region were obtained using tenfold serial dilutions of plasmids generated from cloned targets (Frey, Niklaus, Kremer, Lüscher, & Zimmermann, 2011). Data were converted to represent mean copy number of targets per gram of soil (dry weight).
The other half of the soil sample was bagged in paper, dried to constant weight at 60°C, passed through a 2 mm sieve and analyzed for total C and N concentration with a CE Instruments NC 2100 soil analyzer (CE Elantech Inc., Lakewood NJ, USA). We also collected 20 mature and undamaged leaves of the dominant grass species growing on control and carcass sites, but taxa were not recorded. The plant material was dried at 60°C, finely ground till homogenized and also analyzed to obtain total C and N concentrations. Soil temperature (10 cm depth) was measured with a waterproof digital thermometer (Barnstead International, Dubuque IA, USA) at three locations each at the control and carcass site. Soil moisture (0 – 10 cm depth) was measured with time domain reflectometry (Field-Scout TDR-100; Spectrum Technologies, Plainfield IL, USA) at five randomly chosen points on control and carcass sites. We measured soil respiration at five randomly chosen points at both control and carcass sites with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA). For each measurement the soil chamber (15 cm high; 10 cm diameter) was tightly placed on the soil surface, after clipping plants to avoid measuring plant respiration or photosynthesis. Measurements were conducted over 120 s.
In addition, we assessed the decomposition rates of standardized OM using the cotton strip assay (Latter & Howson, 1977; Latter & Walton, 1988). Cotton cloth tensile strength loss (CTSL) is a measure of decomposition, and an index to express the combined effect of soil microclimatic, physical, chemical and biological properties on decomposition while accounting for OM quality (Latter & Walton, 1988; Risch, Jurgensen, & Frank, 2007; Withington & Sanford Jr., 2007). We placed five 20 cm wide x 13 cm long sheets of 100% unbleached cotton cloth (American Type SM 1/18’’, Warp: 34/1, Weft: 20/1, Weave plain, 29.5 picks/cm warp, 22 picks/cm weft, 237 g/m2; Daniel Jenny & Co., Switzerland;) at each carcass and control site vertically into the soil by making slits with a flat spade to a depth of 12 cm. We inserted each cloth with the spade, and then pushed the slit closed to assure tight contact with the soil. The cloths were retrieved after 18 to 27 days. After retrieval, the cloths were air-dried, remaining soil gently removed by hand, and 1.5 cm wide strips were cut at the 3.5-5.0 cm (top) and the 9-10.5 cm (bottom) soil depth. The strips were equilibrated at 50 % relative humidity and 20°C for 48 hours (climate chamber) prior to strength testing (Scanpro Awetron TH-1 tensile strength tester; AB Lorentzen and Wettre, Kista, Sweden). Cotton rotting rate (CRR) = (CTScontrol - CTSfinal/CTSfinal)1/3 * (365/t), where CTScontrol is the cotton tensile strength of a control cloth and CTSfinal the cotton tensile strength of the incubated sample, t is the incubation period in days. Control cloths were inserted into the ground and immediately retrieved to account for tensile strength loss associated with cloth insertion. We averaged the CRR of top and bottom strips for further analyses as no difference was found between the two. All sampling and cloth insertion took place between June 20 and July 1, 2017, cloths were retrieved between July 17 and 20, 2017. Soil respiration, average CRR, vegetation N concentration and vegetation C:N ratio are defined as ecosystem functions, soil C and N concentration, soil temperature and moisture as soil abiotic properties, and bacterial and fungal richness (number of taxa), diversity (Shannon) and abundance as soil biotic properties.

Statistical analyses
Univariate analyses for ecosystem functions, soil biotic and abiotic properties
We tested whether individual ecosystem functions, soil biotic and abiotic properties differed between carcass and control (“Location”), bison and elk (“Species”) and days since kill (“DSK”). For this purpose, we used linear mixed effect models (LMM, “nlme” package v 3.1 – 131.1 in R v 3.4.4; Pinheiro, Bates, DebRoy, & Sarkar, 2018; R Core Team, 2019) with Location, Species, Location x Species and DSK as fixed effects. Site was included as random effect to account for the paired design. We developed a separate model for all dependent variables. All but bacterial richness, fungal richness, fungal diversity and vegetation N concentration were natural-log transformed to meet model assumptions. For each LMM, we calculated contrasts to assess the specific comparisons we were interested in with the “lsmeans” package v 2.27-62 (Lenth & Love, 2018): 1) carcass vs control, 2) carcass bison vs control bison, and 3) carcass elk vs control elk. We also tested whether we had differences between bison and elk carcasses or the sites where bison and elk were killed and included contrasts 4) carcass bison vs carcass elk and 5) control bison vs control elk.
We calculated the log response ratio (LRR = ln[carcass/control]) to obtain carcass effects for all variables for both species separately. LRR < 0 indicates higher value at control compared to carcass, LRR > 0 indicates higher values at carcass compared control. We used LRRs for visualization and to assess spatial patterns in carcass effects across YNP. For this purpose we calculated the Moran’s I statistic for each ecosystem function, soil biotic and abiotic property based on a latitude-longitude matrix with the “moran.test” function in the “spdep” package version 1.1-3 (Bivand et al., 2019).
Multivariate analyses
Rare OTUs, defined as OTUs with a low abundance of reads, were retained in multivariate methods because they only marginally influence these analyses (Gobet, Quince, & Ramette, 2010). Bray–Curtis dissimilarity matrices were generated based on square-root-transformed matrices. We used Principal Coordinate Analyses (PCoA) to assess how soil bacterial and fungal communities differed between control and carcass of bison and elk (“vegan” package v 2.5-4, Oksanen et al., 2019). We then extracted PCoA axes scores 1 and 2 and used LMM (“nlme” package) with Location, Species, Location x Species and DSK as fixed effects. Site was, again, included as random effect. We again calculated the contrasts as described above using the “lsmeans” package. We also assessed how ecosystem functions, and soil abiotic and biotic properties were related to the soil bacteria and fungi community structure associated with bison and elk control and carcasses using the “envfit” function in the “vegan” package (Oksanen et al., 2019).
Indicator species analyses were performed using the multipatt function implemented in the “indicspecies” package version 1.7.6 with 100000 permutations (De Caceres & Jansen, 2016). This step allowed to identify OTUs that led to changes in multivariate patterns between control and carcass of both bison and elk separately (De Cáceres, Legendre, & Moretti, 2010). The multipatt function uses a point biserial correlation coefficient statistical test. Indicator OTUs were defined as bacterial and fungal OTUs with more than 50 sequences, i.e., removing rare taxa and taxa with low abundances containing little indicator information (Rime et al., 2015) and that were significantly correlated with Location (p < 0.05, correlation coefficient > 0.3). A heatmap of these OTUs were generated with the vegan and ggplot2 packages. The indicator analyses were performed in R version 3.3.3 (R Core Team, 2017).

References
Abarenkov, K., Henrik Nilsson, R., Larsson, K.-H., Alexander, I. J., Eberhardt, U., Erland, S., … Kõljalg, U. (2010). The UNITE database for molecular identification of fungi – recent updates and future perspectives. New Phytologist, 186(2), 281–285. doi:10.1111/j.1469-8137.2009.03160.x
Bengtsson-Palme, J., Hartmann, M., Eriksson, K. M., Pal, C., Thorell, K., Larsson, D. G. J., & Nilsson, R. H. (2015). metaxa2: improved identification and taxonomic classification of small and large subunit rRNA in metagenomic data. Molecular Ecology Resources, 15(6), 1403–1414. doi:10.1111/1755-0998.12399
Bengtsson-Palme, J., Ryberg, M., Hartmann, M., Branco, S., Wang, Z., Godhe, A., … Nilsson, R. H. (2013). Improved software detection and extraction of ITS1 and ITS2 from ribosomal ITS sequences of fungi and other eukaryotes for analysis of environmental sequencing data. Methods in Ecology and Evolution, 4(10), 914–919. doi:10.1111/2041-210X.12073
Bivand, R., Altman, M., Anselin, L., Assuncao, R., Berke, O., Blanchet, G., … Yu, D. (2019). spdep: Spatial dependence, weighthing schemes, statistics. R package version 1.1-3.
Bump, J. K., Peterson, R. O., & Vucetich, J. A. (2009). Wolves modulate soil nutrient heterogeneity and foliar nitrogen by configuring the distribution of ungulate carcasses. Ecology, 90(11), 3159–3167.
Bump, J. K., Webster, C. R., Vucetich, J. A., Peterson, R. O., Shields, J. M., & Powers, M. D. (2009). Ungulate carcasses perforate ecological filters and create biogeochemical hotspots in forest herbaceous layers allowing trees a competitive advantage. Ecosystems, 12(6), 996–1007. doi:10.1007/s10021-009-9274-0
Danell, K., Berteaux, D., & Brathen, K. A. (2002). Effect of muskox carcasses on nitrogen concentration in tundra vegetation. Arctic, 55(4), 389392.
De Caceres, M., & Jansen, F. (2016). indicspecies: relationship between species and groups of species. R package version 1.7.6.
De Cáceres, M., Legendre, P., & Moretti, M. (2010). Improving indicator species analysis by combining groups of sites. Oikos, 119(10), 1674–1684. doi:10.1111/j.1600-0706.2010.18334.x
Edgar, R. C. (2013). UPARSE: highly accurate OTU sequences from microbial amplicon reads. Nature Methods, 10, 996.
Edgar, R. C., & Flyvbjerg, H. (2015). Error filtering, pair assembly and error correction for next-generation sequencing reads. Bioinformatics, 31(21), 3476–3482. doi:10.1093/bioinformatics/btv401
Frey, B., Niklaus, P. A., Kremer, J., Lüscher, P., & Zimmermann, S. (2011). Heavy-machinery traffic impacts methane emissions as well as methanogen abundance and community structure in oxic forest soils. Applied and Environmental Microbiology, 77(17), 6060–6068. doi:10.1128/AEM.05206-11
Frey, B., Rime, T., Phillips, M., Stierli, B., Hajdas, I., Widmer, F., & Hartmann, M. (2016). Microbial diversity in European alpine permafrost and active layers. FEMS Microbial Ecology, 92(3), fiw018.
Frossard, A., Donhauser, J., Mestrot, A., Gygax, S., Bååth, E., & Frey, B. (2018). Long- and short-term effects of mercury pollution on the soil microbiome. Soil Biology and Biochemistry, 120, 191–199. doi:https://doi.org/10.1016/j.soilbio.2018.01.028
Geremia, C., Wallen, R., & White, P. J. (2017). Status report of the Yellowstone bison population, September 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center for Resources.
Gobet, A., Quince, C., & Ramette, A. (2010). Multivariate cutoff level analysis (MultiCoLA) of large community data sets. Nucleic Acids Research, 38(15), e155–e155. doi:10.1093/nar/gkq545
Latter, P., & Howson, G. (1977). The use of cotton strips to indicate cellulose decomposition in the field. Pedobiologia, (17), 145–155.
Latter, P., & Walton, D. (1988). The cotton strip assay for cellulose decomposition studies in soil: history of the assay and development. In Cotton strip assay: an index for decomposition in soils (pp. 7–9). ITE Symposium, Institute of Terrestrial Ecology, Natural Environment Research Council, UK.
Lenth, R., & Love, J. (2018). lsmeans: least-squares means. R package version 2.27-62.
Martin, M. (2011). Cutadapt removes adapter sequences from high-throughput sequencing reads. EMBnet.Journal, 17(1), 10–12.
Meagher, M. M. (1973). The bison of Yellowstone National Park. NPS Scientific Monograph (Vol. 1). National Park Service, Yellowstone Center for Resources.
Melis, C., Selva, N., Teurlings, I., Skarpe, C., Linnell, J. D. C., & Andersen, R. (2007). Soil and vegetation nutrient response to bison carcasses in Białowieża Primeval Forest, Poland. Ecological Research, 22(5), 807–813. doi:10.1007/s11284-006-0321-4
Nikolenko, S. I., Korobeynikov, A. I., & Alekseyev, M. A. (2013). BayesHammer: Bayesian clustering for error correction in single-cell sequencing. BMC Genomics, 14(1), S7. doi:10.1186/1471-2164-14-S1-S7
Oksanen, J., Blanchet, F. G., Friendly, M., Kindt, R., Legendre, P., McGlinn, D., … Wagner, H. H. (2019). vegan: community ecology package. R package version 2.5-4.
Pinheiro, J., Bates, D., DebRoy, S., & Sarkar, D. (2018). nlme: Linear and nonlinear mixed effect models. R package version 3.1-131.1.
Quast, C., Pruesse, E., Yilmaz, P., Gerken, J., Schweer, T., Yarza, P., … Glöckner, F. O. (2013). The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research, 41(Database issue), D590–D596. doi:10.1093/nar/gks1219
Quimby, D. C., & Johnson, D. E. (1951). Weights and measurements of Rocky Mountain elk. Journal of Wildlife Management, 15, 57–62.
R Core Team. (2017). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Zurich, Switzerland.
R Core Team. (2019). R: A language and environment for statistical computing. Vienna, Austria: R Foundation for Statistical Computing.
Rime, T., Hartmann, M., Brunner, I., Widmer, F., Zeyer, J., & Frey, B. (2015). Vertical distribution of the soil microbiota along a successional gradient in a glacier forefield. Molecular Ecology, 24(5), 1091–1108. doi:10.1111/mec.13051
Risch, A. C., Jurgensen, M. F., & Frank, D. A. (2007). Effects of grazing and soil micro-climate on decomposition rates in a spatio-temporally heterogeneous grassland. Plant and Soil, 298(1–2), 191–201. doi:10.1007/s11104-007-9354-x
Schloss, P. D., Westcott, S. L., Ryabin, T., Hall, J. R., Hartmann, M., Hollister, E. B., … Weber, C. F. (2009). Introducing mothur: open-source, platform-independent, community-supported software for describing and comparing microbial communities. Applied and Environmental Microbiology, 75(23), 7537–7541. doi:10.1128/AEM.01541-09
Smith, D., Stahler, D., Cassidy, K., Stahler, E., Metz, M., Cassidy, B., … Cato, E. (2018). Yellowstone National Park wolf project annual report 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center of Resources.
Wang, Q., Garrity, G. M., Tiedje, J. M., & Cole, J. R. (2007). Naive Bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy. Applied and Environmental Microbiology, 73(16), 5261–5267. doi:10.1128/AEM.00062-07
Withington, C., & Sanford Jr., R. (2007). Decomposition rates of buried substances increase with altitude in a forest-alpine tundra ecotone. Soil Biology and Biochemistry, (39), 68–75.

Please cite this paper together with the citation for the datafile.

bacteria

display_name: bacteria

biogeochemical-cycling

display_name: biogeochemical-cycling

carcass

display_name: carcass

carrion

display_name: carrion

decomposition

display_name: decomposition

detritus

display_name: detritus

fungi

display_name: fungi

soil-biodiversity

display_name: soil-biodiversity

wolf

display_name: wolf

yellowstone

display_name: yellowstone

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Elk and bison carcasses in Yellowstone, USA