maintainer: EnviDat Support

en: landscape-services urbanization land-use-change land-use switzerland modeling statistical-model

en: Data for Assessing potential landscape service trade-offs driven by urbanization in Switzerland

en:
The provided folder structure follows the set up of the scripts.
Data is only provided when it has been fully produced by us, otherwise dummies are given.
For data that will be produced by one of the scripts, no dummies are given.
The folders may contain sub-folders, which would be filled if the scripts were all run

 00_Analysis_Data
Data produced throughout the process of the calibration and projection that is later needed for analysis

 01_Raw_Data
Primary data from external sources that were used to compile the rasters and numbers used during the calibration and projection of landscape transitions as well as service calculation

 02_Prepared_Data
Data that will be prepared for further use by scripts are put in here
Additionally it contains the parameter sheets for the transition predictors that we compiled

 03_Model_Data
 Model outputs
Folder were the projection models statistics will be saved
 Models
Folder into which the actual transition models will be saved
 Residuals
Folder into which data on models residuals will be saved for future use

 04_Projected_Data
The output of the projections will be saved into this folder

 05_Service_Data
Any service calculations will be saved in here

 06_Results_Analysis
Any Analysis plots and tables as well as intermediate data will be saved here in the respective sub-folder

en: Scripts for Assessing potential landscape service trade-offs driven by urbanization in Switzerland

en:
Scripts ordered by their main purpose within sequential folders in this ReadMe marked with

Within the folders the capital letters refer to the parallel or sequential use of the scripts; scripts here in ReadMe are marked with

 00_Function Scripts
 Functions.r
Script containing several functions for analyzing statistical models: cohen.kappa, meva.table, D2, max-Tss, plot-TSS

 Service_functions.R
Script containing functions for calculating all services and returning sums (and median for bd and rec) as well as rasters

 01_Data Preparation
 A_AS_raster_preparation.R
Preparation of the land use rasters for the years 1985, 1997, and 2009 based on the original Arealstatistik (AS/ASCH); Assigning our categories and assining new values to all "construction sites" for calibrating the models
For model projection starting point (2009) and for service calculations (all ASCH years) the "other" categories were assigned to the land use categories based on dominant neighbor, so that there were no empty cells
Creation of water & mountainous area raster that stayed stable throughout the projections
Creation of MFH raster (2009), to have as base for all new projection years, as this category never becames any other

 B_Factors_preparation.R
Preparation of the factor rasters that were used to calculate service values per cell (see Table 2): LWfactor, Transportation, Vol, Rivers, Lakes, slope, TWW, Hazard_risk

 B_Predictors_preparation.R
Preparation of the raster of the predictors used for calibrating (ASCH years) and projecting (stable) the transition models that do not depend on the land use categories: Temperature (ASCH years), solar radiation (stable), Public transportation access (stable), Elevation (stable), Workers density (ASCH years), Population change (ASCH transitions)

 B_Regions_preparation.R
Preparation of bioregions as raster to be used to mask asxxxx later to calculated services and land use area just for one region

 C_Pred_proj.R
Projecting the dynamic predictors into the future for projecting the land use transitions with the model: Linear extrapolations for workers densities and population; more detailed extrapolation of temperature (based on data for all stations that matched between the temp table we used for the calibration period and the projections from CS2M, and then making a spatial interpolation for all years based on the interpolation of temperature for all years per station)

 02_Model calibration
 A_Bioreg_pred_corr.R
Calculating correlation between the predictors for each bioregion and land use category, Output are those with too high correlation so that one predictor can be removed from transitions were both predictors occur

 A_trans_numbers_bioreg.R
Calculate transition numbers for each bioregion to decide which transitions to primarily consider

 B_Bioreg_ext_eval.R
Calculating TSS based on the external evaluation for the bioregion transitions that happened often enough to try to model them (calibration data: 85-97, evaluation data: 97-09)

 B_Bioreg_int_eval.R
Calculating TSS based on the internal evaluation for the bioregion transitions that happened often enough to try to model them (calibration data: 70%, evaluation data: 30%)

 C_Bioreg_TSS_analysis.R
Extracting TSS numbers from internal and external evaluation, calculating mean and median for each transition for each region for each evaluation method and saving as csv per region to be able to select only the transitions with high enough model performance

 D_Bioreg_Models_for_prediction.R
Calibration of the models that were then used to project land use transitions into the future; calibrated separately for each bioregion

 E_Residuals_trans_models.R
Calculation of Moran's I statistics to analyze the residuals of the land use transition models

 03_Projections
 A_Bioreg_Projections_run.R
Master script for: Extrapolaitng into the future with the regional models and then assembling for each time step to calculate new AS predictors; Several Outputs: txt file to test for NAs in Predictors, txt file with random seed number for sampling, txt file with times for calculation steps (check progress of script while running), csv sheet with projected transition frequencies, tif-rasters for every region and time step, pdf with raster plot for every region and time step

 04_Service calculation
 A_Bioreg_as_services.R
Calculate services per bioregion for years 1985, 1997, 2009

 A_Service_calculation_bioregions.R
Extracting service numbers(sums) per bioregions for all projection runs and storing them in a list of matrixes to be available for further plotting; can be run for swiss wide projections or regional ones

 05_Analysis
 A_Bioreg_ASCH_development.R
Extracting the occurrence of each category per region for all runs (first part), then for ASCH years, and then plotting them nicely; only works for regional projections

 A_Bioreg_Predictors_importanceD2.R
Calculating D2 for each transition and each considered predictor from bivariate models to get value of importance

 B_Bioreg_Pred_imp_analysis.R
Using calculated D2 to sort Predictors according to their importance for each transition

 A_Bioreg_Spatial_results_analysis.R
Plotting randomly sampled runs for ASCH and services to analyses their spatial development

 A_Bioreg_Transition_numbers_check_v1.R
Analyzing the frequency for all transitions for all regions and producing the point plots for each transition separately

 A_Bioreg_Transition_numbers_check_v2.R
Analyzing percentage and numbers of all transitions but plotting them per region and originating ASCH category

 B_Transition_Analysis.R
Further Analysis of transition numbers

 A_Service_analysis.R
Plotting of the service development for bioregions in several ways for analyzing

en:
Data and scripts of publication:

Madleina Gerecke, Oskar Hagen, Janine Bolliger, Anna M. Hersperger, Felix Kienast, Bronwyn Price, Loïc Pellissier (2019) Assessing potential landscape service trade-offs driven by urbanization in Switzerland. Palgrave communications.

Contains land use projections for Switzerland and scripts and data for these projections as well as the calculation of landscape services.

Data Folder:
Contains sub-folder with the data necessary for this study (provided were no copyright issues, otherwise placeholders with descriptions), and folders where produced data may be stored

Scripts Folder:
Contains scripts organized into subfolders depending on their purpose

Note: Some abbreviations within the scripts and data are derived from German words and not English.

land-use

display_name: land-use

land-use-change

display_name: land-use-change

landscape-services

display_name: landscape-services

modeling

display_name: modeling

statistical-model

display_name: statistical-model

switzerland

display_name: switzerland

urbanization

display_name: urbanization

en: Land use projections and services for Switzerland


en: model sediment-transport snow mars erosion

state: active

type: dataset

media_type: text/plain

en: Datasets of Figure 4a

format: TXT

mimetype: text/plain

en: Datasets of Figure 3b

en: Datasets of Figure 3a

en: Datasets of Figure 4b

en: Datasets of Figure 2

en:
The files contain the datasets used to produce Figures 2, 3, and 4 of the manuscript ([doi: 10.1002/2016GL071822](http://dx.doi.org/10.1002/2016GL071822)).

 Manuscript Abstract:
Despite being the main sediment entrainment mechanism in aeolian transport, granular splash is still poorly understood. We provide a deeper insight into the dynamics of sand and snow ejection with a stochastic model derived from the energy and momentum conservation laws. Our analysis highlights that the ejection regime of uniform sand is inherently different from that of heterogeneous sand. Moreover, we show that cohesive snow presents a mixed ejection regime, statistically controlled either by energy or momentum conservation depending on the impact velocity. The proposed formulation can provide a solid base for granular splash simulations in saltation models, leading to more reliable assessments of aeolian transport on Earth and Mars.

erosion

display_name: erosion

mars

display_name: mars

model

display_name: model

sediment-transport

display_name: sediment-transport

snow

display_name: snow

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Energy- and momentum-conserving model of splash entrainment in sand and snow saltation


maintainer: Yohann Chauvier

en: soil climate phylogenetic-diversity grain-size ecological-indicator-values functional-diversity taxonomic-diversity

en: Data access

media_type: application/zip

format: ZIP

en:
This dataset comprises a large array of ecological data for the European Alps:

  (1) Current soil and climate predictors at various resolutions.
  (2) GBIF observations of the European Alps Flora (~4,000 species).
  (3) Species habitat suitability maps (1,109 species; based on species observations filtered at 40x40-km)
  at various resolutions used in the study to generate (4); except 'expert'...
  (4) Expert, Taxonomic, phylogenetic and functional diversity of the study region at various resolutions
  (from 100-m to 40-km --> 100-m aggregated & mean to km + non-aggregated/predicted) for CLIM,
  SOIL and CLIM-SOIL models.
  (5) Ecological and altitudinal preferences of the European Alps Flora.
  (6) Data outputs of the related published article.
  (7) All scripts used for analyses.
  (8) Additional files used for analyses.
  (9) Improved set of species habitat suitability maps (~2,600 species; based on species observations
  filtered at 1x1-km) and related taxonomic diversity at 100-m resolution (aggregated to km +
  non-aggregated/predicted) for CLIM, SOIL and CLIM-SOIL models ---> not incorporated in the study.

climate

display_name: climate

ecological-indicator-values

display_name: ecological-indicator-values

functional-diversity

display_name: functional-diversity

grain-size

display_name: grain-size

phylogenetic-diversity

display_name: phylogenetic-diversity

soil

display_name: soil

taxonomic-diversity

display_name: taxonomic-diversity

en: Resolution in species distribution models shapes spatial patterns of plant multifaceted diversity


lwf-tea-bag-sites

maintainer: Marcus Schaub

title_for_slug: lwf-tea-bag-sites

en: green-tea forest litter decomposition tea-bag carbon roiboos modeling verification

en: Site Information

media_type: text/csv

en: Descriptive information on sites

format: CSV

mimetype: text/csv

en:
Decomposition of plant litter is a key process for the transfer of carbon and nutrients in ecosystems. Carbon contained in the decaying biomass is released to the atmosphere as respired CO2, and may contribute to global warming. Litterbag studies have been used to improve our knowledge of the drivers of litter decomposition, but they lack comparability because litter quality is plant species-specific. The use of commercial tea bags as a standard substrate was suggested in order to harmonize studies, where green tea and rooibos represent more labile and more recalcitrant C compounds as surrogates of local litter.
The tea bag approach was implemented on eight sites of the Swiss long-term Forest Ecosystem Research (LWF) network (https://www.wsl.ch/LWF). This allowed us to take advantage from the existing infrastructure and data from a previous litterbag study with local litter. In Beatenberg and Schaenis, additional elevation transects were established (1200-1800 m and 540-1150 m, respectively) to examine particularly the effect of temperature on decomposition. In Pfynwald (https://www.wsl.ch/de/ueber-die-wsl/versuchsanlagen-und-labors/flaechen-im-wald/pfynwald.html) and Salgesch, infrastructure of running projects was used to examine the effect of drought and understory removal, respectively. In Novaggio, tea bags were incubated in summer and winter to study the effect of seasonality particularly precipitation. Tea bags are collected after 3, 12, 24, and 36 months; for the two time-shifted experiments additionally after 6 and 9 months.
The study has two primary objectives. Firstly, it contributes to TeaComposition initiative (http://teacomposition.org/) which aims at investigating long-term litter decomposition and its key drivers at present as well as under different future climate scenarios using a common protocol and standard litter (tea) across nine terrestrial biomes. Secondly, the data are used to further develop decomposition models such as Yasso (http://en.ilmatieteenlaitos.fi/yasso) which is used by several countries, including Switzerland to estimate the annual carbon fluxes in dead wood, litter, and soil for reporting in National Greenhouse Gas Inventories under the United Nations Framework Convention on Climate Change and the Kyoto Protocol.

carbon

display_name: carbon

decomposition

display_name: decomposition

forest

display_name: forest

green-tea

display_name: green-tea

litter

display_name: litter

roiboos

display_name: roiboos

tea-bag

display_name: tea-bag

verification

display_name: verification

en: LWF-Tea bag sites


en: wind-speed meteo temperature long-term precipitation par climate-change meteorology relative-humidity swiss-forest-lab

en: Site photo of the field station (NEF)

en: Site photo of the field station from the side.

format: SERVICE

mimetype: image/jpeg

en: Forest station data (NEB)

en: Data file.

en: Site aerial photo (Neunkirch)

en: Site aerial photo from both Neunkirch stations. Source: Google. 2016. Site aerial photo from both Neunkirch stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Field station data (NEF)

en: Data plot of the field station (NEF)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

format: PDF

mimetype: application/pdf

en: Site photo of the forest station (NEB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Data plot of the forest station (NEB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Neunkirch in Switzerland where one station is located within a natural deciduous forest stand (NEB) with European beech (_Fagus sylvatica_; 160 yrs), sycamore maple (_Acer pseudoplatanus_; 160 yrs) and lime trees (_Tilia sp._; 110 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NEF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Neunkirch is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Neunkirch, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: cryosphere natural-climate-variability rain-on-snow uncertainty climate-change-impact snow-water-equivalent

en: climate realizations

en: The dataset contains for three variables (snow water equivalent, surface water input and liquid precipitation) 50 realizations of current and future climate periods for two time horizons (mid end end of century), two emission senarions (RCP 4.5 and 8.5) and 10 climate model chains (all EUR11 chains within CH2018). To quantify natural climate variability for projections of snow conditions and resulting rain-on-snow (ROS) flood events, a weather generator was applied to simulate inherently consistent climate variables for multiple realizations of current and future climates at 100 m spatial and hourly temporal resolution over a 12 x 12 km high-altitude study area in the Swiss Alps. The output of the weather generator was used as input for subsequent simulations with an energy balance snow model. The data was extracted in 2021 from original model output.

climate-change-impact

display_name: climate-change-impact

cryosphere

display_name: cryosphere

natural-climate-variability

display_name: natural-climate-variability

rain-on-snow

display_name: rain-on-snow

snow-water-equivalent

display_name: snow-water-equivalent

uncertainty

display_name: uncertainty

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Multiple realizations of daily snow water equivalent, surface water input and liquid precipitation projections for mid- and late-century


maintainer: Frank Techel

en: avalanche-statistics avalanche-fatalities avalanche-accident long-term-trends avalanche-accident-statistics

en: Data avalanche fatalities 1969/1970 - 2014/2015

en: The data comprises avalanche fatality data from the Alpine regions in the seven countries Austria, France, Germany, Italy, Liechtenstein, Slovenia, and Switzerland.

en:
During the last 45 years, about 100 people lost their lives in avalanches in the European Alps each year. Avalanche fatalities in settlements and on transportation corridors have considerably decreased since the 1970s. In contrast, the number of avalanche fatalities during recreational activities away from avalanche-secured terrain doubled between the 1960s and 1980s and has remained relatively stable since, despite a continuing strong increase in winter backcountry recreational activities.

Data complementing Figure 2 in:
_"Avalanche fatalities in the European Alps: long-term trends and statistics"_, by Techel, F., Jarry, F., Kronthaler, G., Mitterer, S., Nairz, P., Pavšek, M., Valt, M., and Darms, G.

Data description:
please refer to section 2 (Data and Methods) in the mentioned publication

avalanche-accident

display_name: avalanche-accident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

avalanche-statistics

display_name: avalanche-statistics

long-term-trends

display_name: long-term-trends

en: Avalanche fatalities in the European Alps (1969/1970 - 2014/2015)


en: wind-speed raclets wind-velocity wind anemometer wind-direction

en: Sonic wind component w

en:
The data contains values for w direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component u

en:
The data contains values for u direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic time

en: The data set contains the time in YYYY-mm-dd HH:MM:SS.sss for the anemometer data. The time is given in UTC+1.

en: Sonic temperature

en: The data set contains values of temperature (°C) measured with the anemometer at a sampling frequency of 20 Hz.

en: Sonic wind component v

en:
The data contains values for v direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: A Young 81000 sonic anemomenter was deployed at Gotschnagrat (LON: 46.859 LAT: 9.849) to record three components of the wind velocity (u, v, w in [m s‾ ¹]) and air temperature (Ts in [°C]). The anemomenter was mounted in direction North at a height of 1.5 m above snow surface at the beginning. The time within each data set is given in UTC+1. Instrument specifications can be found [here](http://www.youngusa.com/Manuals/81000-90(I).pdf) .

anemometer

display_name: anemometer

raclets

display_name: raclets

wind

display_name: wind

wind-direction

display_name: wind-direction

wind-velocity

display_name: wind-velocity

en: Snow Drift Station - 3D Ultrasonic


causal-effect-of-lup

title_for_slug: causal-effect-of-lup

en: psm-did annual-effect land-use-planning plan-evaluation land-use-change

en: causal-effect-of-lup

en:
Data.dbf contains the varibles of 1662 villages in Zhangzhou Cities
PSM_DID.R can re-produce the results

en:
Title: Does zoning contain built-up land expansion? Causal evidence from Zhangzhou City, China.

Research objective: Built-up land zoning is an imporatant policy measure of land use planning (LUP) to contain built-up land expansion in China. We used a difference-indifference model with propensity score matching to estimate the average and annual effect of built-up land zoning on built-up land expansion in Zhangzhou City, China between 2010 and 2020.

Data: Data.dbf contains the varibles of 1662 villages in Zhangzhou Cities in 1995, 2000, 2005, 2010, 2013, 2015, 2018, and 2020.
XZQDM2 is villages' unique administrative ID;
Area is the land area of village i;
Dis2water is the Euclidean distance from village i to the nearest waterbody;
Dis2coastl is the Euclidean distance from village i to the nearest coastline;
Dis2city is the the Euclidean distance from village i to the city center;
Dis2county is the the Euclidean distance from village i to the nearest county center;
Elevation is the the average elevation within village i;
Dis2road is the the Euclidean distance from village i to the nearest road;
Nei_Built_ is the the area of built-up land (Nei Built.upit) in the neighboring villages of village i in year t;
Treated is a binary variable, Treated = 1 to the villages that were partially or entirely located inside the development-permitted zones, and Treated = 0 to the villages that were entirely located outside the development-permitted zones;
Intensity is the percentage of land that was assigned to the development-permitted zones in village i;
Year represent the year in 1995, 2000, 2005, 2010, 2013, 2015, 2018, and 2020;
BuLE is the dependent variable, representing built-up land expansion in village i in year t;
Town is town' unique administrative ID.

Method: First, we employed propensity score matching to overcome the selection bias and satisfy the parallel trend
assumption. Second, we built four Difference-in-Difference models to estimate the average and annual effect.

annual-effect

display_name: annual-effect

land-use-change

display_name: land-use-change

land-use-planning

display_name: land-use-planning

plan-evaluation

display_name: plan-evaluation

psm-did

display_name: psm-did

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Causal effect of LUP


maintainer: Loïc Pellissier Pellissier

en: community-indices herbivores-communities functional-traits alps elevation plant-herbivore-interactions environmental-gradients

en: Nematode surveys

en: Surveys of soil nematode along elevation

en: Orthoptera traits

en: Orthoptera functional traits (incisive mandibular strength averaged by species)

en: Study sites

en: Coordinates and elevation of the study sites

en: Vegetion surveys

en: Species inventories of plants

en: Orthoptera surveys

en: Species inventories of Orthoptera

en: Plant traits

en: Plant functional traits (SLA, LDMC, carbon and nitrogen content, punch strenght; averaged by species)

en: Despite the common role of above- and below-ground herbivore communities in mediating ecosystem functioning, our understanding of the variation of species communities along natural gradient is largely strongly biased toward aboveground organisms. This dataset enables to study the variations in assemblages of two dominant groups of herbivores, namely, aboveground orthoptera and belowground nematodes together with their food plants. Herbivores and plant surveys were conducted in 48 natural grasslands along six elevation gradients, selected to span the major macro-climatic and environmental conditions of the Swiss Alps. It compiles herbivores and plant surveys, information on the study sites as well as plant and herbivores functional traits sought to be involved in trophic interactions and to respond to climatic variation along the elevation. Plant functional traits considered are the SLA, the LDMC, the C/N content, the punch strength (i.e. force required to pierce the leave lamina), the mandibular strength for Orthoptera insect. Data were collected during the summer 2016 and 2017.

alps

display_name: alps

community-indices

display_name: community-indices

elevation

display_name: elevation

environmental-gradients

display_name: environmental-gradients

functional-traits

display_name: functional-traits

herbivores-communities

display_name: herbivores-communities

plant-herbivore-interactions

display_name: plant-herbivore-interactions

en: Above- and below-ground herbivore communities along elevation


maintainer: Dirk Nikolaus Karger

en: climate-layers climate temperature climate-change climatology bioclim precipitation free-climate-data

en: CHELSA V2.1 (current)

en: CHELSA Version 2.1 based on ERA5 forcings and CMIP6

format: GeoTIFF

en: CHELSA V1.2 (deprecated)

en: CHELSA Version 1.2 based on ERA-Interim forcings and CMIP5

en: CHELSA Technical Documentation

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present the CHELSA (Climatologies at high resolution for the earth’s land surface areas) data of downscaled temperature and precipitation to a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperatures. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height, with a subsequent bias correction.

CHELSA data published in EnviDat includes the deprecated version 1.2 (originally published under 10.5061/dryad.kd1d4). Please use the current 2.1 version.

Paper Citation:
 > _Karger DN. et al. Climatologies at high resolution for the earth’s land surface areas, Scientific Data, 4, 170122 (2017) [doi: 10.1038/sdata.2017.122](https://doi.org/10.1038/sdata.2017.122)._

bioclim

display_name: bioclim

climate

display_name: climate

climate-change

display_name: climate-change

climate-layers

display_name: climate-layers

climatology

display_name: climatology

free-climate-data

display_name: free-climate-data

precipitation

display_name: precipitation

temperature

display_name: temperature

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en:
Attention: this data is not updated after 2022 anymore.
This dataset contains the statistics on the number of avalanche fatalities per **calendar year** in Switzerland. The data collection commences with the beginning of the year 1937. After the completion of a hydrological year, which is the standard way avalanche fatalities are summarized in Switzerland and ends on the 30th of September, the new data is appended to the existing dataset.
If you require annual statistics per hydrological year, please download the data from here: [https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936]
The following information is contained (by column and column title):
 - year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste, away from open and secured ski runs)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)
The definitions for these four categories, as described in the guidelines to the avalanche accident database are:
tour:
activities include back-country ski, snowboard or snow-shoe touring
offpiste:
access from ski area, generally from the top of a skilift with short hiking distances
transportation.corridors (Techel et al., 2016):
people travelling or recreating on open or temporarily closed transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)
buildings (Techel et al., 2016):
people inside or just outside buildings, and workers on high alpine building sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

en: Number of avalanche fatalities per calendar year in Switzerland since 1937


en: snow-distribution canopy-height airborne-laser-scanning forest-structure snow-depth

en: Canopy height maps

en: Canopy height maps of each of the three field areas Davos, Engadine and Grand Mesa

mimetype: application/zip

en: Readme

en: Snow depth maps

en: Snow depth maps from two snow-on flights at each of the three field areas Davos (March 20th and 31st 2017), Engadien (March 20th and 31st, 2017) and Grand Mesa (February 8th and 16th, 2017)

en: Terrain elevation maps

en: Digital elevation model computed from snow-off flights for each of the field areas Davos, Engadine and Grand Mesa

en:
This dataset includes snow depth, canopy height and terrain elevation maps of forest stands in the Grisons (CH) and at Grand Mesa (CO,USA) derived from airborne lidar. Data were acquired i) within a pilot mission of NASA's Airborne Snow Observatory in the Swiss Alps in March 2017 and ii) during NASA’s SnowEx campaign at Grand Mesa in February 2017. Snow depth maps are available for two dates separated by approx.1 week, and include an area of ca. 0.5km2 for each of the three sites Davos, Engadine and Grand Mesa.
All data were presented and analyzed in the publication 'Revisiting Snow Cover Variability and Canopy Structure within Forest Stands: Insights from Airborne Lidar Data' (Mazzotti et al., 2019, WRR, doi: 10.1029/2019WR024898). This publication must be cited when using this dataset.

Paper Citation:
 > _Giulia Mazzotti; William Ryan Currier; Jeffrey S. Deems; Justin M. Pflug; Jessica D. Lundquist; Tobias Jonas (2019). Revisiting Snow Cover Variability and Canopy Structure Within Forest Stands: Insights From Airborne Lidar Data. Water Resources Research, 55, 6198– 6216, [doi: 10.1029/2019WR024898](https://doi.org/10.1029/2019WR024898)._

airborne-laser-scanning

display_name: airborne-laser-scanning

canopy-height

display_name: canopy-height

forest-structure

display_name: forest-structure

snow-depth

display_name: snow-depth

snow-distribution

display_name: snow-distribution

en: ALS-based snow depth and canopy height maps from flights in 2017 (Grisons, CH and Grand Mesa, CO)


biogas-aus-hofdunger-in-der-schweiz

title_for_slug: biogas-aus-hofdunger-in-der-schweiz

en: biogas switzerland bioenergy review manure

en: Biogas aus Hofdünger in der Schweiz

en: Ziel dieses Whitepapers ist es, Entscheidungsträgern, Verwaltungen und Stakeholdern die aktuellsten Forschungsergebnisse zur Verfügung zu stellen, um die optimale Nutzung von Bioenergie aus Hofdünger in der Schweizer Energiewende zu fördern. Zu diesem Zweck werden die Ergebnisse des Schweizer Kompetenzzentrums für Bioenergieforschung - SCCER BIOSWEET - zusammengefasst und in einem breiteren Kontext dargestellt. Wenn nichts anderes erwähnt wird, beziehen sich die Ergebnisse auf die Schweiz und im Falle der Ressourcen auf die heimischen Biomassepotenziale.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland


en: depth-of-snowfall terrestrial-laser-scans terrestiral-laserscanning gridded-data antarctica

en: Deprecated: Scan from 11 January 2019, 10 cm resolution, version 1

en: This resource is deprecated. It contains erroneous data.

en: Scan from 2 January 2019, 1 mm resolution

en: Scan from 11 January 2019, 1 mm resolution

en: Scan from 2 January 2019, 10 cm resolution

en: Scan from 4 January 2019, 10 cm resolution

en: Scan from 11 January 2019, 10 cm resolution, version 2

en: Scan from 21 December 2018, 1 mm resolution

en: Scan from 4 January 2019, 1 mm resolution

en: Scan from 27 December 2018, 1 mm resolution

en: Scan from 21 December 2018, 10 cm resolution

en: Scan from 27 December 2018, 10 cm resolution

en:
Surface topography maps (spatial extent: 400 m x 400 m) obtained at approximately 300 m from the top of the Hammarryggen Ice Rise in Dronning Maud Land, East Antarctica, using a Riegl VZ-6000 Terrestrial Laser Scanner (TLS). Scans were obtained on 5 days in the 2018-2019 Austral summer: on December 21 and 27, and January 2, 4 and 11. By using reflectors installed on bamboo poles, scans were registered with respect to the reflectors, such that the difference between two successive scans reveals the spatial patterns of erosion and deposition of snow. On each scan day, we used multiple scan positions to create one combined point cloud. After applying an octree filter on the point cloud, a 3D surface was obtained. For each day, the dataset contains a 1 mm and a 10 cm octree filter resolution file, only including points in a 400 m x 400 m area centered around the scan positions.

Notes:

* All files in the dataset are in the same coordinate system. However, this coordinate system is arbitrary (i.e., not related to any global coordinate system).

* From the installed reflectors, 4 reflectors could be used over the full period. The scan accuracy is generally higher within the area enclosed by the reflectors.

* The scans from January 2 were found to have exhibited small tilt during the scan and are of lesser accuracy.

* By walking along fixed corridors, disturbance of the snow was limited.

antarctica

display_name: antarctica

depth-of-snowfall

display_name: depth-of-snowfall

gridded-data

display_name: gridded-data

terrestiral-laserscanning

display_name: terrestiral-laserscanning

terrestrial-laser-scans

display_name: terrestrial-laser-scans

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Terrestrial laser scans on Hammarryggen Ice Rise, Dronning Maud Land, East Antarctica


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: soil-moisture davos dischma-catchment meteorological-measurements meteo-station

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: IRKIS Soil moisture measurements Davos


maintainer: Michael Lehning

en: Description

en: Full Data Description

en: Data Source

en: Coordinates of Grid Points

en: Hourly Gridded Wind Power Time Series

en:
This dataset consist of simulated hourly power production from an Enercon E82 Turbine at 100 m hub-height. It describes the hourly power output a 1MW turbine would produce in each 0.01° grid cell for the years 2016 and 2017.

100 m wind speed data was taken from the COSMO-1 model (Consortium for Small-scale Modeling 2017), which has a 0.01° horizontal resolution. The domain covered is the whole of Switzerland, with the exclusion of lakes. As such, the number of 0.01◦ pixels within Switzerland amounts to 48657.
Conversion to power output was done based on the power curve of the Enercon E82 Turbine. As power output is lower at altitude due to lower air density, we corrected for this effect as described in (Kruyt et al. 2017).

Please cite the following paper in connection with the dataset:

Paper Citation:
 > _Bert Kruyt, Jérôme Dujardin, and Michael Lehning: Improvement of wind power assessment in complex terrain: The case of COSMO-1 in the Swiss Alps, Front. Energy Res., [doi:10.3389/fenrg.2018.00102] (https://doi.org/10.3389/fenrg.2018.00102)_

mountain-wind-potential

display_name: mountain-wind-potential

topography

display_name: topography

wind-energy

display_name: wind-energy

en: Dataset on Cosmo-1 based Energy Potential in Swiss Alps


maintainer: Matthias Haeni

en: swiss-forest-lab meteo precipitation par long-term temperature meteorology wind-speed climate-change relative-humidity

en: Site aerial photo (Visp)

en: Site aerial photo from both Visp stations. Source: Google. 2016. Site aerial photo from both Visp stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Field station data (VSF)

en: Data file.

en: Data plot of the forest station (VSB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the field station (VSF)

en: Site photo of the field station (VSF)

en: Site photo of the field station from the side.

en: Site photo of the forest station (VSB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Forest station data (VSB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Visp in Switzerland where one station is located within a natural mixed forest stand (VSB) with Scots pine (_Pinus sylvestris_; 40-80 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, VSF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Visp is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Visp, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: soil-moisture soil-water-content landslide-early-warning soil-water-matrix-potential soil-temperature

en: In-situ soil moisture measurements, Wasen i.E., flat location, 2019-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, and two additional soil temperature measurements (oC), air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2019-Dec 2022.
Location: flat terrain, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Wasen i.E., steep slope, 2019-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, and two additional soil temperature measurements (oC), air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2019-Dec 2022.
Location: steep hillslope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Ranflüh, 2021-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, as well as air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2021-Dec 2022.
Location: hillslope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Trub, 2021-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, as well as air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2021-Dec 2022.
Location: slope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: Detailed description of soil moisture measurment sites, soil properties and sensor installations (in German)

en: In-situ soil moisture measurements, Langnau i E, 2021-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each. Meteorological variables, such as air temperature or precipitation can be received from MeteoSwiss.
Time intervall: 1 hour. Measurement period: June 2021-Dec 2022.
Location: flat terrain, meadow (measurement site of MeteoSwiss)
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Napf, 2021-2022

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each. Meteorological variables such as air temperature or precipitation can be received from MeteoSwiss.
Time intervall: 1 hour.
Measurement period: June 2021-Dec 2022.
Location: flat terrain, meadow (official MeteoSwiss station)
For a detailed description of site, soil and vegetation: see attached document.

en: In the context of landslide early warning research, soil moisture (e.g. volumetric soil water content and soil water potential) has been measured at six locations in the Napf-region (Emmental, central Switzerland) since April 2019. Here, we provide the hourly mean values of all sensors from all 6 locations after a comprehensive data control, filtering and aggregation (from 10-min to 1-hour values). A sub-set of these data (for the locations Wasen i.E.) has previously been published in envidat.ch at https://www.doi.org/10.16904/envidat.369 applying the same data post-processing method. The dataset is complemented with meteorological data (locally measured air temperature and precipitation) as well as soil temperature. A detailed description of the sites and measurement installations can be found in a separate report (attached with the data).

landslide-early-warning

display_name: landslide-early-warning

soil-temperature

display_name: soil-temperature

soil-water-content

display_name: soil-water-content

soil-water-matrix-potential

display_name: soil-water-matrix-potential

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: In-situ soil moisture measurements Napf-region 2019-2022


high-resolution-climate-data-for-europe

title_for_slug: high-resolution-climate-data-for-europe

en: daily-climate cordex air-temperature maximum-temperature precipitation eur11 europe minimum-temperature

en: CHELSA EUR11 Technical Documentation

en: As the CHELSA project is continuously expanded, certain new parameters, time scales etc. are not included anymore in the original publication (Karger et al. 2017). We are therefore provide this document as a guideline of the current climatic parameters available and will expand it as new parameters or time periods will become available. Please refer to the version history for changes made in the document.

en: Data Access

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present downscaled climate data for the CORDEX EUR11 domain at a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperature lapse rates. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height. The resulting data consist of a daily temperature and precipitation timeseries.

The data is distributed under a: Creative Commons: Attribution 4.0 International (CC BY 4.0) license.

air-temperature

display_name: air-temperature

cordex

display_name: cordex

daily-climate

display_name: daily-climate

europe

display_name: europe

maximum-temperature

display_name: maximum-temperature

minimum-temperature

display_name: minimum-temperature

en: High resolution climate data for Europe


en: acoustic-emissions snow-failure snow-mechanics sintering viscous-deformation snow snow-avalanche fiber-bundle-model

en: fiber-bundle-model-for-snow-failure

en: Data underlying Figures in publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted to "Geophysical Research Letters"

en:
This dataset contains modeled and experimental results for laboratory snow failure experiments and the concurrent acoustic emissions signatures for different loading rates. For modelling the snow failure we used a fiber bundle model that includes sintering and viscous deformation.

The data underlay the figures in the publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted for publication to "Geophysical Research Letters".

acoustic-emissions

display_name: acoustic-emissions

fiber-bundle-model

display_name: fiber-bundle-model

sintering

display_name: sintering

snow

display_name: snow

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-mechanics

display_name: snow-mechanics

viscous-deformation

display_name: viscous-deformation

en: Fiber Bundle Model for snow failure and concurrent Acoustic Emissions


photogrammetric-drone-data-gruenbodeli

title_for_slug: photogrammetric-drone-data-gruenbodeli

en: orthophoto photogrammetry wingtra dsm uav drone-data snow-depth-mapping

en:
- ortho (3 cm/25 mm resolution)
- DSM (10 cm resolution)
- HS (10 cm resolution)
- RGB images
- Agisoft Metashape Project Report

All products are also available as a cloud optimized geotiff.

en:
We conducted various drone flights at Grüenbödeli near Davos with the Sony RX1R II mounted on a Wingtra drone during 2020/21/22. The data was processed with the Agisoft Metashape Professional Software.
The following products are available for download:
- DSM 10cm resolution
- Orthomosaic 3cm/25mm resolution
- Snow Raster 10cm resolution
- original RGB images

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

snow-depth-mapping

display_name: snow-depth-mapping

uav

display_name: uav

wingtra

display_name: wingtra

en: Photogrammetric Drone Data Grüenbödeli


bryophytes-of-europe-traits-bet-dataset

title_for_slug: bryophytes-of-europe-traits-bet-dataset

en: red-list iucn mosses bioclimatic-variables liverworts indicator-values life-history-traits hornworts

en: Excel file including the BET dataset and (trait) explanations.

format: XLS

en: PDF including the (trait) explanations.

en: Text file including the BET dataset.

en: The Bryophytes of Europe Traits (BET) dataset includes values for 65 biological and ecological traits and 25 bioclimatic variables for all 1816 bryophytes included in the European Red List (Hodgetts et al. 2019). The traits are compiled from several regional trait datasets and manually complemented using Floras, species-specific literature and expert knowledge. The bioclimatic variables are calculated using the European range of each species. Details regarding the trait compilation and extraction of bioclimatic variables can be found in the corresponding data paper (Van Zuijlen et al. 2023).

bioclimatic-variables

display_name: bioclimatic-variables

hornworts

display_name: hornworts

indicator-values

display_name: indicator-values

iucn

display_name: iucn

life-history-traits

display_name: life-history-traits

liverworts

display_name: liverworts

mosses

display_name: mosses

red-list

display_name: red-list

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: raclets clouds ice-nucleation backward-trajectories aerosol

en: This dataset contains number concentrations of ice-nucleating particles active at -15 °C observed at Weissfluhjoch during February and March 2019, as well as complementary data (measured aerosol number concentrations and modelled total precipitation along air mass trajectories). This data formed the basis of our paper with the title “Towards parameterising atmospheric concentrations of ice-nucleating particles active at moderate supercooling”.

aerosol

display_name: aerosol

backward-trajectories

display_name: backward-trajectories

clouds

display_name: clouds

ice-nucleation

display_name: ice-nucleation

raclets

display_name: raclets

en: Ice nucleating particle concentrations active at -15 °C at Weissfluhjoch


soil-respiration-exclosure-experiment

title_for_slug: soil-respiration-exclosure-experiment

en: grazing grassland subalpine soil-respiration ungulates

en: Soil respiration Switzerland

en:
ID: Fence number

Year	:Year of sampling

mean.CO2: soil respiration measured with PP-systems SRC-1 soil respriation chamber attached to a EGM-4 infrared gas analyser; units CO2 g m-2 h-1

Grassland: Grasslands where fences were errected. Note that on large grasslands (STAB, GRIM, MING) 2 pairs of fences were errected (2 in short, 2 in tall-grass vegetation), on small grasslands (DADA, MARG, BOTS) only one pair of fences was errected (1 short-grass; one-tallgrass vegetation)

Fence: Fence number; un-even numbers on short-grass vegetation (1,3,5,7,9,11,13,15,17), even numbers on tall-grass vegetation (2,4,6,8,10,12,14,16,18)

Vegetation:	1 = shortgrass vegetation, 2 = tall-grass vegetation (9 replicate fences on each vegetation type)

Treatment	: 1 = all herbivores grazing, 2 = large ungulates (red deer, chamois) excluded

en:
Location of data collection
The Swiss National Park (SNP) is located in the southeastern part of Switzerland, and covers an area of 170 km2, 50 km2 of which is forested, 33 km2 is occupied by alpine and 3 km2 by subalpine grasslands. Elevations range from 1350 to 3170 m a.s.l., and mean annual precipitation and temperature are 871 mm and 0.6°C measured at the Park’s weather station in Buffalora (1980 m a.s.l.) between 1960 and 2009 (MeteoSchweiz 2011). Founded in 1914, the SNP received minimal human disturbance for almost 100 years (no hunting, fishing, or camping, visitors are not allowed to leave the trails). Large (> 1 ha) homogeneous patches of short- and tall-grass vegetation characterize the subalpine grasslands. The average vegetation height of short-grass vegetation is 2 to 5 cm. Red fescue (Festuca rubra L.), quaking grass (Briza media L.) and common bent grass (Agrostis tenuis Sipthrob) are the predominating plant species in this vegetation type. Tussocks of evergreen sedge (Carex sempervirens Vill.) and mat grass (Nardus stricta L.) are predominant in the tall-grass vegetation, which averages 20 cm in vegetation height (Schütz and others 2006). Short-grass vegetation developed in areas where cattle and sheep rested (high nutrient input) during agricultural land-use (from 14th century until 1914); tall-grass vegetation developed in areas where cattle and sheep used to graze, but did not rest (Schütz and others 2003, 2006). Herbivores were shown to consume > 60% of the biomass in short-grass compared to < 20% in tall-grass vegetation (Schütz and others 2006). The herbivore community present in the SNP can be divided into four groups based on body size/weight: large [red deer (Cervus elaphus L.) and chamois (Rupricapra rupricapra L.); 30 - 150 kg], medium [marmot (Marmota marmota L.) and snow hare (Lepus timidus L.); 3 – 6 kg], and small vertebrate herbivores (small rodents: e.g. Clethrionomys spp., Microtus spp., Apodemus spp.; 30 – 100 g) as well as invertebrates (e.g. grasshoppers, caterpillars, cicadas, < 5 g).

Experimental design
We selected 18 subalpine grassland sites (9 short-grass, 9 tall-grass vegetation). The sites were spread across the entire park on dolomite parent material at altitudes of 1975 to 2300 meters. At each site we established an exclosure network (fences) in spring 2009 (early June), immediately after snowmelt. Each exclosure network consisted of a total of five 2 × 3 m sized plots that progressively excluded the different herbivores listed above (further labeled according to the herbivore guilds that had access to the respective plots “All”, “Marmot/Mice/Invertebrates”, “Mice/Invertebrates”, “Invertebrates”, “None”). The “All” treatment was thus accessible to all herbivores, was not fenced and was located at least 5 m away from a 2.1 m tall and 7 × 9 m main fence that enclosed the other four treatments. This fence was constructed of 10 × 10 cm wooden posts and electrical equestrian tape (AGRARO ECO, Landi, Bern, Switzerland; 20 mm width) mounted at 0.7 m, 0.95 m, 1.2 m, 1.5 m and 2.1 m above the ground that were connected to a solar charged battery (AGRARO Sunpower S250, Landi, Bern, Switzerland). We also mounted non-electrically charged equestrian tape at 0.5 m to help exclude deer and chamois, yet allow marmots and hares to enter safely. Within each main fenced area we randomly established four 2 × 3 m plots: (1) The “Marmot/Mice/Invertebrates” plot remained unfenced, thus, with the exception of red deer and chamois, all herbivores were able to access the plot, (2) The “Mice/Invertebrates” plot consisted of a 90 cm high electric sheep fence (AGRARO Weidezaunnetz ECO, Landi, Bern, Switzerland; mesh size 10 × 10 cm) connected to the solar panel and excluded all medium sized mammals (marmots, hares), but provided access for small mammals and invertebrates, (3) The “Invertebrates” plot provided access for invertebrates only and was surrounded by 1 m high metal mesh (Hortima AG, Hausen, Schweiz; mesh size 2 × 2 cm), (4) The “None” plot was surrounded by a 1 m tall mosquito net (Sala Ferramenta AG, Biasca, Switzerland; mesh size 1.5 × 2 mm) to exclude all herbivores. This plot was covered with a roof constructed of a wooden frame lined with mosquito mesh that was mounted on the wooden corner posts. We also treated this plot with a biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) when needed to remove insects that might have entered during data collection or that hatched from the soil.

!!! The here published data set only contains data for “All”, and “Marmot/Mice/Invertebrates” (= ungulates excluded) plots !!!

Data collection
In-situ soil CO2 emissions were measured with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA) on two randomly selected locations on one subplot within each of the 90 plots. For each measurement the soil chamber (15 cm high; 10 cm diameter) was placed on a permanently installed PVC collar (10 cm diameter) driven five centimeters into the soil at the beginning of the study (June 2009). The measurements were conducted between 0900 and 1700 hours every two weeks from early to early September 2009, 2010, 2011 and 2013. Freshly germinated plants growing within the PVC collars were removed prior to each measurement to avoid measuring plant respiration/photosynthesis. The two measurements collected per plot every two weeks were averaged.

Please acknowledge the funding of the study: funded by the Swiss National Science Foundation, SNF grant-no 31003A_122009/1 to Anita C. Risch, Martin Schütz and Flurin Filli

grassland

display_name: grassland

grazing

display_name: grazing

soil-respiration

display_name: soil-respiration

subalpine

display_name: subalpine

ungulates

display_name: ungulates

en: Soil respiration - exclosure experiment


greenland-shrubs-and-microclimate

maintainer: Nathalie Chardon

title_for_slug: greenland-shrubs-and-microclimate

en: accessible-shrub-forest validation field-data climate sdm arctic

en: Kangerluarsunnguaq

en:
 Collected August 2020 (PI: Nathalie Isabelle Chardon)

These data collected August 2020 (PI: Nathalie Isabelle Chardon). Please contact N. I. Chardon (nathalie.chardon_at_gmail.com) for individual quadrat (i.e. 1 m x 1 m) data, which are averaged at the 90 m spatial grid here.

 COLUMN ABBREVIATIONS

 Metadata for 90 m spatial grid

id: sampling zone and unique 90 m grid identifier

long: WGS84 longitude

lat: WGS84 latitude

x_stere: longitude in Polar Stereographic (EPSG 4326)

y_stere: latitude in Polar Stereographic (EPSG 4326)

date: sampling day.month.year

 Species presence [1] or absence [0] at grid level

alcr: _Alnus crispa_

bena: _Betula nana_

dila: _Diapensia lapponica_

emni: _Empetrum nigrum_

hahy: _Harimanella hypoides_

lopr: _Loiseleuria procumbens_

oxpa: _Oxycoccus palustre_

phca: _Phyllodoce caerulea_

rhod: _Rhododendron_ sp.

saar: _Salix arctica_

sagl: _Salix glauca_

sahe: _Salix herbacea_

vaul: _Vaccinium uliginosum_

drin: _Dryas integrifolia_

thpr: _Thymus praecox_

 Habitat characteristics [% cover]

shrub: all shrub species

gram: graminoids

forb: forbs

bryo: bryophytes

lich: lichens

litt: litter

bare: bare ground

stone: stones (> 2 cm)

org: organic crust

 Shrub species height (maximum vegetative height) [mm] and cover (estimated in 1x1 m quadrat) [%]

alcr_c: _Alnus crispa_ cover

alcr_h: _Alnus crispa_ height

bena_c: _Betula nana_ cover

bena_h: _Betula nana_ height

dila_c: _Diapensia lapponica_ cover

dila_h: _Diapensia lapponica_ height

emni_c: _Empetrum nigrum_ cover

emni_h: _Empetrum nigrum_ height

hahy_c: _Harimanella hypoides_ cover

hahy_h: _Harimanella hypoides_ height

lopr_c: _Loiseleuria procumbens_ cover

lopr_h: _Loiseleuria procumbens_ height

oxpa_c: _Oxycoccus palustre_ cover

oxpa_h: _Oxycoccus palustre_ height

phca_c: _Phyllodoce caerulea_ cover

phca_height: _Phyllodoce caerulea_ height

rhod_c: _Rhododendron_ sp. cover

rhod_h: _Rhododendron_ sp. height

saar_c: _Salix arctica_ cover

saar_h: _Salix arctica_ height

sagl_c: _Salix glauca_ cover

sagl_h: _Salix glauca_ height

sahe_c: _Salix herbacea_ cover

sahe_h: _Salix herbacea_ height

vaul_c: _Vaccinium uliginosum_ cover

vaul_h: _Vaccinium uliginosum_ height

drin_c: _Dryas integrifolia_ cover

drin_h: _Dryas integrifolia_ height

 Community characteristics

rich_pa: shrub species richness at grid level

rich: shrub species richness averaged across 3 1x1 m sampling quadrats per grid

shan: Shannon diversity (‘vegan’ package; Oksanen et al. 2019)

comp_bena: shrub competition on _Betula nana_ (i.e. summed cover of non-_B. nana_ species) [% cover]

comp_sagl: shrub competition on _Salix glauca_ (i.e. summed cover of non-_S. glauca_ species) [% cover]

ht_cwm: maximum shrub canopy height (i.e. community weighted mean by abundance of maximum shrub height) [mm]

 Topography and terrain wetness (calculated from)

tcws: Tasseled Cap Wetness component (Sentinal images)

slope: slope angle (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

twi: SAGA wetness index (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015)

asp: aspect (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

 Downscaled climate (time series 1984 – 2013)

insoljja: average June-August insolation [MJ cm-2 yr-1]

precipmam: cumulative March-May precipitation [mm]

tempcont: yearly maximum – minimum temperature [ºC]

tempmin: yearly minimum temperature [ºC]

precipjja: cumulative June-August precipitation [mm]

tempjja: average maximum June-August temperature [ºC]

tempmax: yearly maximum temperature [ºC]

en: GitLab Repository

en: Zip drive of GitLab repository contents (https://gitlab.com/nathaliechardon/gl_microclim).

en: Nuup Kangerlua

en:
 Collected July-August 2011-2013 (PI: Jacob Nabe-Nielsen)

These data collected July-August 2011-2013 (PI: Jacob Nabe-Nielsen). Please contact J. Nabe-Nielsen (jnn_at_ecos.au.dk) to request access to data on all surveyed shrub species. Available here are only data used in Chardon et al. 2022.

 COLUMN ABBREVIATIONS

 Metadata for 90 m spatial grid

year: sampling year

alt: average altitude of grid as recorded during field surveys [m]

long: WGS84 longitude

lat: WGS84 latitude

x_stere: longitude in Polar Stereographic (EPSG 4326)

y_stere: latitude in Polar Stereographic (EPSG 4326)

 Species presence [1] or absence [0] at grid level

pa_bena: _Betula nana_

pa_sagl: _Salix glauca_

 Shrub species cover (calculated from pin hits in 0.7 x 0.7 m frame, based on total of 25 hits) [%]

cov_bena: _Betula nana_ cover

cov_sagl: _Salix glauca_ cover

 Downscaled climate (time series 1984 – 2013)

tempjja: average maximum June-August temperature [ºC]

tempmax: yearly maximum temperature [ºC]

tempmin: yearly minimum temperature [ºC]

tempcont: yearly maximum – minimum temperature [ºC]

precipmam: cumulative March-May precipitation [mm]

precipjja: cumulative June-August precipitation [mm]

insoljja: average June-August insolation [MJ cm-2 yr-1]

 Topography and terrain wetness (calculated from)

twi: SAGA wetness index (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015)

slope: slope angle (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

asp: aspect (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

tcws: Tasseled Cap Wetness component (Sentinal images)

 Community characteristics

rich: shrub species richness averaged across pin-point frames per grid

shan: Shannon diversity (‘vegan’ package; Oksanen et al. 2019)

comp_bena: shrub competition on Betula nana (i.e. summed cover of non-_B. nana_ species) [% cover]

comp_sagl: shrub competition on Salix glauca (i.e. summed cover of non-_S. glauca_ species) [% cover]

en:
 Study Aim

We collected these data to alternatively train and validate high resolution (~ 90 m) Species Distribution Models (SDMs) and Species Abundance Models (SAMs) for _Betula nana_ L. (dwarf birch, Betulaceae) and _Salix glauca_ L. (grey willow, Salicaceae) in Southwest Greenland to assess how well such models can predict local-scale patterns.

 Data Description

Individual (presence-absence, abundance, maximum vegetative height) and community (species composition, maximum canopy height) shrub data for two fjords near Nuuk, Southwest Greenland. Also provided are corresponding downscaled climate data as well as calculated topographic and terrain wetness indicator variables.

 Nuup Kangerlua (Godthåbsfjord)

_Betula nana_ and _Salix glauca_ presence-absence, abundance, community species richness

 Kangerluarsunnguaq (Kobbefjord)

Shrub presence-absence, abundance, maximum vegetative height, community composition, maximum shrub canopy height

 Methods

 Field survey in Nuup Kangerlua

We conducted a stratified systematic plant survey along the length of Nuup Kangerlua (NK) fjord in Soutwesth Greenland (Fig. 1 in Chardon et al. 2022; following Nabe-Nielsen et al., 2017). At five distinct sites, we sampled along elevational gradients to collect data on presences, absences, abundance, and species composition of all woody species using a 0.7 x 0.7 m pin-point frame (Fig. 1e in Chardon et al. 2022). For model training, we converted these pin-point data to percent cover estimates based on the number of pins dropped (n = 25 per plot) and averaged them across the 119 spatio-climatic grids (see next section) corresponding to the plot locations (for details see Appendix S2 in Chardon et al. 2022).

 Field survey in Kangerluarsunnguaq

We conducted a random stratified plant survey in Kangerluarsunnguaq (K) fjord in Southwest Greenland. We used a preliminary Species Abundance Model trained with summed pin counts of _Betula nana_ in NK fjord (see Fig. S1.3 in Chardon et al. 2022) to stratify the ~ 27 x 17 km fjord landscape into low, medium, and high abundances classes. We randomly selected 90 x 90 m spatio-climatic grids to survey in each class for a total of 200 grids, ensuring that they were accessible by foot or boat (for details see Appendix S2 in Chardon et al. 2022). Within each grid, we sampled within three 1 m2 quadrats arranged in a randomly rotated equilateral triangle centered on the mid-point of the cell. We used a gridded sampling quadrat with 1% delineations (Fig. 1h in Chardon et al. 2022) to record woody species presences, absences, and composition, estimated percent cover, and measured maximum shrub species vegetatitve height. At every plot, we also visually scanned the area in a 20 m radius from the plot and recorded the presence of any additional shrub species to estimate grid-level species richness. As in NK fjord, we averaged these data at the grid level (for details see Appendix S2 in Chardon et al. 2022).

 Biotic variables

We calculated biotic microscale variables from the plant survey data collected in NK and K fjords. We calculated shrub species richness, diversity, and competition (i.e. sum of non-B. nana or non-S. glauca pin hits or percent cover). In K fjord, we also calculated canopy height as the community weighted mean (by abundance) of maximum vegetative shrub height.

 Climate variables

We computed high resolution temperature, precipitation, and insolation for local scale data for the study area by statistically downscaling climate time series (1982 - 2013) from the monthly CHELSA data (Karger et al. 2017). We downscaled these data from 30 arc sec (~ 400 m at the latitude of our study) to our target grid size of ~ 90 m with geographic weighted regression and using the MEaSUREs Greenland Ice Mapping Project (GIMP) Digital Elevation Model (DEM) v. 1 (Howat et al., 2014, 2015). We then calculated 30-year averages of the climate parameters: average summer (June – August) maximum temperature, yearly maximum temperature, yearly minimum temperature, temperature continentality (yearly max. - min. temperatures), cumulative Spring (March – May) precipitation, cumulative summer precipitation, and average summer incident solar radiation (henceforth, insolation) (for calculation details see Appendices S2, S3 in Chardon et al. 2022 and Appendix S2 in von Oppen et al. 2021).

 Topography and terrain wetness indicator variables

We calculated several topographic and terrain wetness indices at a local scale. We derived slope, aspect, and the SAGA wetness index (hereafter TWI; Boehner et al., 2002; Boehner and Selige, 2006) from the GIMP DEM. TWI is a measure of how ‘wet’ an area is, based on water drainage from the surrounding landscape. We also calculated the tasseled cap wetness component (hereafter TCW, Crist and Cicone 1984) from satellite images (for details see Appendices S2, S3 in Chardon et al. 2022) as an alternative measure of wetness.

 Computer code

Attached as zip file and available on GitLab (https://gitlab.com/nathaliechardon/gl_microclim)

 Third-party data

Data used to calculate climate, topography, and terrain wetness indicator variables are publicly available (see Appendix S2 in Chardon et al. 2022 for all data references).

accessible-shrub-forest

display_name: accessible-shrub-forest

arctic

display_name: arctic

climate

display_name: climate

field-data

display_name: field-data

sdm

display_name: sdm

validation

display_name: validation

en: Greenland shrubs and microclimate


envidat-supports-open-science

maintainer: Ionut Iosifescu Enescu

title_for_slug: envidat-supports-open-science

en: envidat juypter-notebooks open-science research-data-management wsl

en: Article as PDF

en:
The article "EnviDat Supports Open Science" originally appeared in WSLintern No. 3 (2020), page 14-15 and it is republished here with permission from the WSLintern editorial team. It contains guidelines for WSL scientists about the main issues behind Open Science and how to pragmatically approach the complexities of doing Open Science with EnviDat’s support.

License: This article is released by WSL and the EnviDat team to the public domain under a Creative Commons 4.0 CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

envidat

display_name: envidat

juypter-notebooks

display_name: juypter-notebooks

open-science

display_name: open-science

research-data-management

display_name: research-data-management

wsl

display_name: wsl

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat Supports Open Science


maintainer: Mathias Bavay

en: relative-humidity soil-temperature stillberg shortwave-radiation treeline air-pressure wind-direction snow-depth dew-point-temperature precipitation-sum wind-speed air-temperature

en: The Davos Stillberg meteorological data (Stillberg_meteo_v1.1.zip) consists of timeseries from five meteorological stations operated at the Stillberg treeline ecological research site. Metadata are provided in the folder 'Stillberg_meteo_metadata' and the data in the folder 'Stillberg_meteo_data' with subfolders for the three quality levels 'raw_standardized', ‘raw_edited’, and ‘filtered’.

en: The Davos Stillberg meteorological data (Stillberg_meteo_v1.zip) consists of timeseries from five meteorological stations operated at the Stillberg treeline ecological research site. Metadata are provided in the folder 'Stillberg_meteo_metadata' and the data in the folder 'Stillberg_meteo_data' with subfolders for the three quality levels 'raw_standardized', ‘raw_edited’, and ‘filtered’.

en:
 Background information
The Stillberg ecological treeline research site is located in the transition zone between the relatively humid climate of the Northern Alps and the continental climate of the Central Alps. In 1975, 92,000 seedlings of the high-elevation conifer species *Larix decidua* Mill. (European larch), *Pinus cembra* L. (Cembran pine), and *Pinus mugo* ssp. *uncinata* (DC.) Domin (mountain pine) were systematically planted across an area of 5 hectares along an elevation gradient of about 150 metres, with the aim to develop ecologically, technically, and economically sustainable afforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Alongside the ecological long-term monitoring of the afforestation, several meteorological stations have recorded local meteorological conditions at the Stillberg research site. Here, we provide the Davos Stillberg meteorological timeseries of five stations from 1975 (01-01-1975), the year of the afforestation establishment, until the end of the year 2022 (31-12-2022).

 Station description
The five meteorological stations were all installed at the same location (46°46′25.015″N 9°52′01.792″E) at 2090 m a.s.l., in the lower part of the afforestation area. In general, the five stations were operated sequentially (Stillberg_meteo_metadata_stations_v1.csv). However, there are some overlapping time periods when more than one station was operated in parallel. The stations have recorded environmental parameters, such as air and soil temperature, dew point temperature, air pressure, relative humidity, wind direction and velocity, radiation, precipitation, and snow depth (Stillberg_meteo_metadata_parameters_v1.csv). The meteorological measurements were recorded hourly from 1975 until 1996 and have been recorded in 10-minute intervals since 1997.

 Data description
We processed the Davos Stillberg meteorological timeseries with the MeteoIO meteorological data pre-processing library (Bavay & Egger, 2014). Data files are provided for each station and quality level separately and named according to the station (see ‘Stillberg_meteo_metadata_stations_v1.csv’). From the raw data in their original formats, we generated three data quality levels: raw standardized (folder ‘raw_standardized’), edited (folder ‘raw_edited’) and filtered (folder ‘filtered’). The processing level is indicated in the headers of the data files. The whole processing protocol is described in a set of human-readable configuration files that are used by MeteoIO to generate the required data quality levels. This improves long-term reproducibility (Bavay et al., 2022), as the data could be regenerated in the future, even using a completely different software, to account for additional data points or to introduce new data corrections. The first quality level (raw standardized) is generated by parsing the original data files and interpreting them in order to convert all data points to a common format and meteorological parameter naming scheme, while excluding unreadable or duplicated data lines. The generated data files are derivatives of CSV files, with a standardised header that contains the metadata that are necessary to interpret and use the data (use metadata) and to populate a data index (search metadata). The latter is a textual implementation of the Attribute Convention for Data Discovery (ACDD) metadata standard (Attribute Convention for Data Discovery 1-3, 2022). The second quality level (edited) builds on the raw data by performing low-level data editing, such as removing some data periods that are known to be unusable (often based on maintenance records or anecdotal evidence) or applying undocumented calibration factors (for example, when there seems to be an obvious offset on a measured parameter for a period between two documented maintenance operations). The third quality level is generated by applying statistical filters on the data (per station and per meteorological parameter) to exclude presumably wrong values. We did not perform gap filling, as no single strategy could be relied upon that would work best for all possible data usage scenarios.

air-pressure

display_name: air-pressure

air-temperature

display_name: air-temperature

dew-point-temperature

display_name: dew-point-temperature

precipitation-sum

display_name: precipitation-sum

relative-humidity

display_name: relative-humidity

shortwave-radiation

display_name: shortwave-radiation

snow-depth

display_name: snow-depth

soil-temperature

display_name: soil-temperature

stillberg

display_name: stillberg

treeline

display_name: treeline

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

en: Long-term meteorological station Stillberg, Davos, Switzerland at 2090 m a.s.l.


present-weather-sensor-klosters

maintainer: Maxime Hervo

title_for_slug: present-weather-sensor-klosters

en: raclets sensor visibility precipitation weather

en: Present Weather Sensor Klosters

en: Present Weather sensor measuring visibility and weather type installed at Klosters.

en: A present weather sensor (Vaisala PWD22) was deployed in Klosters (LON: 9.880413, LAT: 46.869019) for weather observation, combining the functions of a forwardscatter visibility meter and a present weather sensor. Besides measuring ambient light, it detects the intensity as well as the amount of both liquid and solid precipitation. More information can be found in the [User's Manual](ftp://ftp.cmdl.noaa.gov/aerosol/doc/manuals/PWD22_Manual.pdf).

precipitation

display_name: precipitation

raclets

display_name: raclets

sensor

display_name: sensor

visibility

display_name: visibility

weather

display_name: weather


maintainer: Franziska Gerber

en: antarctica blowing-snow reproducibility cryowrf surface-mass-balance

en: Processed CRYOWRF output used for the analysis and the figures in the paper.

en: Static input data from the WRF simulations (used in the python scripts in Scripts_Reproducibility).

en: Processed WRF output (run with Noah-MP land surface model) used for the analysis and the figures in the paper.

en: Python scripts to reproduces figures in Gerber et al., 2022, submitted.

en: Namelist and input files and information to run the WRF and CRYOWRF simulations used in the paper.

en: Python scripts to reproduces figures in Gerber et al., 2022, revised

mimetype: application/x-zip-compressed

en:
This dataset contains data and scripts for "CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB" (Gerber et al., submitted).

* Simulation_setup: Namelists and input information to run the simulation. Some input files need to be downloaded from Sharma et a., 2021.
* Static_input: Static topography input file of WRF (geo_em.d01).
* WRF_27km_NoahMP: Preprocessed WRF output of the simulation run with the WRF using the surface parameterization Noah-MP to reproduce the figures and results in the paper.
* WRF_27km_CRYOWRF: Preprocessed WRF output of the simulation run with CRYOWRF to reproduce the figures and results in the paper.
* Scripts_Reproducibility: Python scripts to reproduce the figures and results in the paper.

Note:

* To run some of the scripts Atmospheric Weather station data needs to be prepared using Gerber and Lehning, 2022.
* AWS data is not provided and needs to be downloaded from the corresponding databases. Please make sure to comply with the respective terms and conditions.

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

cryowrf

display_name: cryowrf

reproducibility

display_name: reproducibility

surface-mass-balance

display_name: surface-mass-balance

en: Reproducibility dataset for CRYOWRF validation


en: topography cosmo-wrf cryowrf static-data landuse wrf

en: Static data for WRF - Soiltype bottom

en: Example namelist.wps to use with the 1s static data

en: Static data for WRF - Soiltype top

en:
Example GEOGRID.TBL to use with the 1s static data;
Note about naming:
* 121 -> 1-2-1 topography smoothing applied to dataset
* 1 -> one smoothing cycle applied to the data (needs to be changed depending on the chosen resolution to avoid too steep slope angles)

en: Static data for WRF - Topography

en: Documentation

en: Documentation of the dataset

en: Static data for WRF - Landuse

en: Static input data (topography, landuse and soiltype) for the WRF preprocessing system WPS is provided for Switzerland and its neighboring countries between 45-49 N and 4-12 E. The data is provided at a resolution of 1 s. Topography is based on the Aster dataset, while landuse is extracted from the Corine landuse dataset. Soil type is set to silty clay loam for the entire domain. This static input data is valid for WRF and CRYOWRF.

cosmo-wrf

display_name: cosmo-wrf

landuse

display_name: landuse

static-data

display_name: static-data

topography

display_name: topography

wrf

display_name: wrf

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: High resolution static data for WRF over Switzerland


maintainer: Vanessa Burg

en: switzerland bioenergy manure review biogas

en: Biogas from animal manure in Switzerland: energy potential, technology development and resource mobilization

en: Aim of this white paper is to provide decision-makers, administrations and stakeholders with the most current research findings in order to promote the optimal use of bioenergy from manure in the Swiss energy transition. For this purpose, the results of the Swiss competence center for bioenergy research - SCCER BIOSWEET - are summarized and presented in a broader context. If nothing else is mentioned, the results refer to Switzerland and in case of the feedstock to the domestic biomass potentials.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland


en: large-eddy-simulations turbulence blowing-snow drifting-snow micro-rain-radar mass-flux eddy-covariance-measurements antarctica meteorological-data

en: Measurement data from Micro Rain Radar (MRR)

en: Remote sensing data of blowing snow from a Micro Rain Radar (MRR).

en: Readme

en: Meta data

en: Measurement data from micro-meteorological station

en: Automatic in-situ measurements of micro-meteorology and snow transport

en: Source code of the large-eddy simulations coupled with a Lagrangian stochastic model (LES-LSM), available on GitLab.

en: Simulation data for a situation with significant snow transport

en: Data from two LES-LSM simulations called Drift_1 and Drift_2, which reproduce the conditions observed at the S17 site on 11th January 2019, 00:40 to 00:50 UTC.

en: Simulation data for a situation with negligible snow transport

en: Results from two LES-LSM simulations called NoDrift_1 and NoDrift_2, which reproduce the conditions observed at the S17 site on 12th January 2019, 05:40 to 05:50 UTC.

en: Measurement data from snow particle counter at MRR site

en: Near-surface observations of drifting snow from a Snow Particle Counter (SPC) installed at the location of the Micro Rain Radar.

en:
This dataset contains measurement and simulation data. The measurements characterize the standard meteorology, turbulence, and snow transport at the S17 site near Syowa Station in East Antarctica during an expedition in austral summer 2018/2019. Large-eddy simulations with sublimating particles provide additional insight into the latent and sensible heat exchange between snow and air in two example situations observed at the S17 site.

A part of the measurement data was recorded by an automatic measurement station from 10th January 2019 to 26th January 2019. This measurement station was equipped with standard meteorological sensors, a three-dimensional ultrasonic anemometer, an open-path infrared gas analyzer, a snow particle counter, an infrared radiometer for measurements of the surface temperature, and a sonic ranging sensor measuring changes in snow surface elevation.

At a horizontal distance of approximately 500 m, a Micro Rain Radar (MRR) was installed in a tilted configuration with an elevation angle of 7° for remote sensing of blowing snow between 25th December 2018 and 24th January 2019. In addition, near-surface in-situ measurements of snow transport were performed at the location of the MRR by deploying a snow particle counter from 27th December 2018 to 24th January 2019.

The simulations cover a 18 x 18 x 6 m³ domain and reproduce the steady-state conditions during a 10-min interval with significant snow transport and another 10-min interval with negligible snow transport. We provide the model source code and the post-processed simulation data, i.e., horizontally averaged quantities as a function of height and time.

drifting-snow

display_name: drifting-snow

eddy-covariance-measurements

display_name: eddy-covariance-measurements

large-eddy-simulations

display_name: large-eddy-simulations

mass-flux

display_name: mass-flux

meteorological-data

display_name: meteorological-data

micro-rain-radar

display_name: micro-rain-radar

turbulence

display_name: turbulence

en: Meteorology and snow transport at S17 near Syowa, Antarctica, in austral summer 2018/2019


en: deposition hill particles snow dust atmosphere turbulence

en: preferential deposition patterns of all simulations performed

en: The data consist of matlab files. Each files contains a 2D array with the values of deposition at the surface nodes. Each array has Nx x Ny values. Please refer to the original paper for additional information on the spatial resolution and grid size.

en:
Preferential deposition of snow and dust over complex terrain is responsible for a wide range of environmental processes, and accounts for a significant source of uncertainty in surface mass balances of cold and arid regions. Despite the growing body of literature on the subject, previous studies reported contradictory results on the location and magnitude of deposition maxima and minima. This study aims at unraveling the governing processes of preferential deposition in neutrally stable atmosphere and to reconcile seemingly inconsistent results of previous works. For this purpose, a comprehensive modeling approach is developed, based on large eddy simulations of the turbulent airflow, Lagrangian stochastic model of particle trajectories, and immersed-boundary method to represent the underlying topography. The model performance is tested against wind tunnel measurements of dust deposition around isolated and sequential hills. A scale analysis is then performed to investigate the dependence of snowfall deposition on the particle Froude and Stokes numbers, which fully account for the governing processes of inertia, flow advection, and gravity. Additional simulations are performed, to test whether the often used assumption of inertialess particles yields accurate deposition patterns. We finally show that our scale analysis provides qualitatively similar results for hills with different aspect ratios.

This dataset contains the results of the LES-LSM model. Each Matlab file contains a 2D array of deposition values (in kg/m2) in each surface node (ix, iy) of the Cartesian grid. The file names are consistent with the simulation numbers listed in the original paper. For additional information, please refer to "Preferential deposition of snow and dust over hills: governing processes and relevant scales" by F. Comola, M. G. Giometto, S. T. Salesky, M. B. Parlange, and M. Lehning, Journal of Geophysical Research: Atmospheres, 2019.

atmosphere

display_name: atmosphere

deposition

display_name: deposition

dust

display_name: dust

hill

display_name: hill

particles

display_name: particles

snow

display_name: snow

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: snow-stability-evaluation snowpack avalanche snow avalanche-forecast

en: Manually observed snow profiles

en: Manually observed snow profiles as csv-files containing depth [cm], thickness [cm], density [kg m-3], hand hardness, first grain type, second grain type, first grain size [mm], and second grain size [mm] of each layer.

en: Stability tests

en: Stability tests including csv-files with CT, ECT and PST experiments for each year and each field site.

en: SNOWPACK simulations

en: This dataset contains all SNOWPACK simulations, including input files, setup and output files.

en: README

en: README file explaining data structure and content

en: Extracted data

en: Extracted data contain validation and results published in Richter et al. (2019).

en:
To validate the critical crack length as implemented in the snow cover model SNOWPACK, PST experiments were conducted for three winter seasons (2015-2017) at two field site above Davos, Switzerland. This dataset contains manually observed snow profiles and stability tests. Furthermore, corresponding SNOWPACK simulations are included.
These data were analyzed and results were published in Richter et al. (2019).

Please refer to the Readme file for further details on the data.

These data are the basis of the following publication:
Richter, B., Schweizer, J., Rotach, M. W., and van Herwijnen, A.: Validating modeled critical crack length for crack propagation in the snow cover model SNOWPACK, The Cryosphere, 13, 3353–3366, https://doi.org/10.5194/tc-13-3353-2019, 2019.

avalanche

display_name: avalanche

avalanche-forecast

display_name: avalanche-forecast

snow-stability-evaluation

display_name: snow-stability-evaluation

snowpack

display_name: snowpack

en: Validating and improving the critical crack length in SNOWPACK


rorcc

maintainer: Tobias Wechsler

title_for_slug: rorcc

en: environmental-flow climate-change hydropower design-discharge run-of-river-power-plants

en: RoRCC

en:
The dataset “RoRCC” consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
-	metadata on the RoR power plants under consideration
-	annual and seasonal production scenarios differentiated into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)
-	annual and seasonal production loss due to environmental flow requirements
-	annual and seasonal the technical increase potential (via design discharge optimisation)
-	annual and seasonal changes in the hydrological cycle for the three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)

en:
The dataset "RoRCC" consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
1) metadata on the RoR power plants under consideration, 2) annual and seasonal production potential scenarios under into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099), 3) annual and seasonal streamflow scenarios, 4) annual and seasonal production loss due to environmental flow requirements, 5) annual and seasonal the technical increase potential (via design discharge optimisation) and 6) annual and seasonal changes in the hydrological cycle.

climate-change

display_name: climate-change

design-discharge

display_name: design-discharge

environmental-flow

display_name: environmental-flow

hydropower

display_name: hydropower

run-of-river-power-plants

display_name: run-of-river-power-plants