en: icecube specific-surface-area intercomparison snow microct

en: Grain survey of snow particles

en: The file contains all measurements of the artificial particles for snow types A, B, C, D and E, including the artificial particle mass in the Petri dish.

en: Statistics of samples

en: The file contains all data for the plot in figure 1 of the co-located density and SSA measurement at Summit, Greenland in May 2015, conducted by Schneebeli, Proksch, Schmid.

en: TARTES simulations

en: Jupyter notebook with TARTES simulations.

en: IceCube and MicroCT data

en: The file contains all micro-CT and IC measurements for snow types A, B, C, D and E used in our study. All samples were processed (and stored) in a cold laboratory at -15°C.

en: SMP measurement files for snow types A, B, C and D.

en: artificial_snow_data set

en: The file contains all micro-CT and IC measurements of the artificial snow data set. The data set was originally produced to investigate the influence of black carbon on SSA measurements.

en: Influence of black carbon on the measurement of the specific surface of snow with the near infrared method - Philipp Baumann

en: These experiments investigate different possible errors by measuring the specific surface area (SSA) of snow with the near infrared method. The influence of black carbon on this measurement was disproved, the theory was therefore validated. It shows that sunlight has no influence on the measurement with the IceCube. Wind drift snow as thin layer on the sample can increase the measured value of the specific surface by a few percent. This could be part of the error, observed in former measurements at SLF. As reference for the measured SSA values with the near infrared method, computer tomography was used to verify the SSA values.

en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

snow

display_name: snow

specific-surface-area

display_name: specific-surface-area


maintainer: EnviDat Support

en: radiation-transfer forest microclimate statistical-interpolation ecology biodiversity climate-change

state: active

type: dataset

media_type: application/zip

en: Predicted microclimate air temperatures at 100 cm above ground. 10 m spatial resolution raster files are provided for mean daily minimum (tmin), mean (tmean) and maximum (tmax) temperatures during each month from April (04) to October (10) over the period between 2012 to 2021.

format: ZIP

en: Predicted microclimate topsoil temperatures at 5 cm below ground. 10 m spatial resolution raster files are provided for mean daily minimum (tmin), mean (tmean) and maximum (tmax) temperatures during each month from April (04) to October (10) over the period between 2012 to 2021.

en: Predicted microclimate air temperatures at 5 cm above ground. 10 m spatial resolution raster files are provided for mean daily minimum (tmin), mean (tmean) and maximum (tmax) temperatures during each month from April (04) to October (10) over the period between 2012 to 2021.

en: Climate data matching the scales at which organisms experience climatic conditions are often missing. Yet, such data on microclimatic conditions are required to better understand climate-change impacts on biodiversity and ecosystem functioning. Here we combine a national network of microclimate temperature measurements with a novel radiative transfer model to map monthly minimum, mean and maximum temperatures during the vegetation period at a 10 meter spatial resolution across Switzerland. The temperature measurements took place in 107 sampling plots distributed across different habitat types, with 62 plots in forests, 22 below trees outside forests, and 23 in open grasslands. In each plot we measured temperature in the topsoil (-5cm), as well as in the air at 5cm and 100cm height above ground. Spatial interpolation was achieved by using a hybrid approach based on linear mixed effects models with input from detailed radiation estimates that account for topographic and vegetation shading, as well as other predictor variables related to the macroclimate, topography and vegetation height. Our data reveals strong horizontal and vertical variability in microclimate temperature, particularly for maximum temperatures at 5 cm above the ground and within the topsoil. Compared to macroclimate conditions as measured by weather stations outside forests, diurnal air and topsoil temperature ranges inside forests were reduced by up to 3.0 and 7.8 °C, respectively, while below trees outside forests, e.g. in hedges and below solitary trees, this buffering effect was 1.8 and 7.2 °C. We also found that in open grasslands, maximum temperatures at 5 cm above ground are on average 3.4 °C warmer than that of macroclimate, suggesting that in such habitats heat exposure close to the ground is often underestimated when using macroclimatic data. After accounting for macroclimate effects, microclimate patterns were primarily driven by radiation, with particularly strong effects on maximum temperatures. Results from spatial block cross-validation revealed predictive accuracies as measured by RSME’s ranging from 1.18 to 3.43 °C, with minimum temperatures generally being predicted more accurately than maximum temperatures. The microclimate maps presented here enable a more biologically relevant perspective when analysing climate-species interactions, which is expected to lead to a better understanding of biotic and ecosystem responses to climate and land use change.

biodiversity

display_name: biodiversity

climate-change

display_name: climate-change

ecology

display_name: ecology

forest

display_name: forest

microclimate

display_name: microclimate

radiation-transfer

display_name: radiation-transfer

statistical-interpolation

display_name: statistical-interpolation

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Monthly topsoil and near surface microclimate temperature data for Switzerland


en: cosmo-wrf high-resolution meteoswiss complex-terrain numerical-simulation

en: MeteorologicalData

en: Scripts to process meteorological data (see Section 2 in COSMOWRFdocumentation.pdf).

mimetype: application/zip

en: Postprocessing

en: Postprocessing scripts to map WRF output on swiss coordinates (see Section 7 in COSMOWRFdocumentation.pdf)

en: WPSrun

en: Scripts to run the WRF pre-processing (WPS) for COSMO-WRF simulation (see Section 5 in COSMOWRFdocumentation.pdf)

en: StaticData

en:
Scripts to process geographical/static data (see Section 3 in COSMOWRFdocumentation.pdf).
- ascii_to_bin_landuse.f90
- ascii_to_bin_soiltype.f90
- ascii_to_bin_topo_wgs84_ws2sf1.f90
- see_slopes.ncl
- soiltype_writing.py
- toposmooth_wgs84_cosmobound.ncl
- write_geogrid.o

en: WRFrun

en: Scripts to run COSMO-WRF simulation (see Section 6 in COSMOWRFdocumentation.pdf)

en: COSMO-WRF documentation v1.0

media_type: application/pdf

en:
Gerber, Franziska; Sharma, Varun (2018). Running COSMO-WRF on very-high resolution over complex terrain. EnviDat. doi:10.16904/envidat.35

Documentation about the procedure to run COSMO-WRF

format: PDF

mimetype: application/pdf

en: WPSSetup

en: Scripts that need to be changed to compile WPS (see COSMOWRFdocumentation.pdf, Section 4)

en: This is a technical documentation of the procedure to run the Weather Research and Forecasting (WRF) model over complex alpine terrain using Consortium for Small-Scale Modeling (COSMO) reanalysis by the Federal Office of Meteorology and Climatology (MeteoSwiss) as initial and boundary conditions (COMSO-WRF). The setup is adapted for very high resolution simulations based on COSMO-2 (2.2 km resolution) reanalysis. This document gives an overview over steps to setup COSMO-WRF and adaptations needed to run COSMO-WRF. Additionally, the calculation of precipitation rate at a horizontal plane and remapping COSMO-WRF output on Swiss coordinates are documented.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

high-resolution

display_name: high-resolution

meteoswiss

display_name: meteoswiss

numerical-simulation

display_name: numerical-simulation


maintainer: Jana von Freyberg

en: stable-water-isotope precipitation catchment hydrology stream-water alptal

en:
Version 2 of the dataset contains additional information on:
- line-conditioned (lc) excess
- precipitation sample volumes
- isotope data quality

format: SERVICE

en: Data Set Documentation: alptal_Isotopes_daily_2015-2019_v2

en: Documentations contains meta data of the data columns and information about the study catchments.

media_type: text/plain

en: Single comma-separated txt-file with daily data of stable water isotopes measured in streamwater and precipitation in the Swiss Alptal catchment and two of its tributaries (Erlenbach and Vogelbach), as well as daily data of key hydrometeorological variables from the Alptal valley

format: TXT

en: This dataset contains four years of daily measurements of the natural isotopic composition (2H, 18O) of precipitation and stream water at the Alp catchment (area 47 km2) in Central Switzerland and two of its tributaries (0.73 km2 and 1.55 km2). In addition, the dataset contains daily measurements of key hydrometeorological variables.

alptal

display_name: alptal

catchment

display_name: catchment

hydrology

display_name: hydrology

precipitation

display_name: precipitation

stable-water-isotope

display_name: stable-water-isotope

stream-water

display_name: stream-water

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Four years of daily stable water isotope data in stream water and precipitation from three Swiss catchments


maintainer: Lisa Hülsmann

en: primeval-forests mortality-models tree-mortality fagus-sylvatica forest-reserves forest-inventory

en: German data

media_type: text/csv

en:
READ ME for

Hülsmann L, Bugmann H, Commarmot B, Meyer P, Zimmermann S, Brang P
Data from: Does one model fit all? Patterns of beech mortality in natural forests of three European regions.
Ecological Applications http://dx.doi.org/10.5061/dryad.h4s6t

Forest inventory data of beech for the development of individual-tree mortality models from strict forests reserves in Switzerland, Germany and Ukraine.

The data package provides the files
CH_reduced: inventory data of the reduced dataset from Switzerland that was used to assess the influence of additional environmental and stand characteristics on beech mortality
CH: inventory data from strict forest reserves in Switzerland
DE: inventory data from strict forest reserves in Germany
UA: inventory data from a primeval beech forest in Ukraine

A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.
Diameter at breast height: dbh (mm)
Annual relative basal area increment: relBAI (), calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area (Bigler and Bugmann 2004)
Status of the tree: y, 0 = alive, 1 = dead
Length of the mortality period: dt (years)

Additional environmental and stand characteristics were derived for the reduced Swiss dataset.
Note the varying seasonal level of the covariates considering the entire year, the growing season from April to September (G) and the winter month January to March (W).
All climatic covariates were calculated for both the ‘growth’ (2) and the ‘mortality’ period (3). The stand covariates were derived for the second inventory of each record (2).

Mean diameter at breast height: dbh.mean.2 (mm)
Interquartile range of diameter at breast height: dbh.IQR.2 (mm)
Median diameter at breast height: dbh.median.2 (mm)
Basal area per hectare: BA.2 (m2 ha-1)
Number of trees per hectare: N.2 (ha-1)
pH-value: pH ()
Available water capacity in the soil: AWC (mm)
Mean annual precipitation sum: P.2, P.3 (mm)
Mean precipitation sum during growing season: PG.2, PG.3 (mm)
Mean annual air temperature: mT.2, mT.3 (°C)
Mean air temperature during growing season: mTG.2, mTG.3 (°C)
Mean air temperature during winter months: mTW.2, mTW.3 (°C)
Mean growing degree-days: GDD.2, GDD.3 ()
Mean number of months during growing season with water deficit: mDEFdurG.2, mDEFdurG.3 ()
Mean annual maximum water deficit: mDEFmax.2, mDEFmax.3 (mm)
Overall maximum of the annual maximum water deficit: maxDEFmax.2, maxDEFmax.3 (mm)
Mean of cumulative water deficit during growing season: mDEFcumG.2, mDEFcumG.3 (mm)
Overall maximum of cumulative water deficitduring growing season: maxDEFcumG.2, maxDEFcumG.3 (mm)
Percentage of years with at least one month water deficit: percDEF.2, percDEF.3 (%)

format: CSV

mimetype: text/csv

en: Swiss data full

en: Swiss data reduced

en: Ukrainian data

en:
The datasets comprise nearly 19’000 trees of European beech (_Fagus sylvatica_ L.) from unmanaged forests in Switzerland, Germany / Lower Saxony and Ukraine. Tree death was modelled as a function of size and growth, i.e., stem diameter (DBH) and relative basal area increment (relBAI). To explain the spatial and temporal variability in mortality patterns, we considered a large set of environmental and stand characteristics.

 Inventory data
The strict forest reserves in Switzerland and Germany had been established in the period of 1961-1975 and 1971-1974, respectively. Every reserve included up to 10 permanent plots ranging from 0.09 to 1.8 ha in size, with slightly irregular re-measurement intervals. Permanent plots with pure or mixed beech stands were selected from the reserves of both networks. Reserves with considerable wind disturbance during the monitored intervals were excluded from the analysis. In addition to data from the Swiss and German reserves, data from a 10 ha plot in the primeval beech forest Uholka in Western Ukraine including three remeasurements were used. The inventory data provide diameter measurements at breast height (dbh) for revisited trees with a diameter of more than 4, 7 and 6 cm for Switzerland, Germany and Ukraine, respectively.

 Mortality predictors
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory. As an explanatory variable, the annual relative basal area increment (relBAI) was calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area. Tree dbh in the second inventory was used in addition to relBAI to model tree status (alive or dead) of the third inventory.

To increase the generality of the mortality models, we selected environmental variables that are known to have a considerable influence on growth and mortality of beech. We emphasized the effects of water availability using a large set of drought characteristics that were calculated based on the local site water balance. We also related beech mortality to soil pH, temperature, precipitation and growing degree-days. Additionally, we considered stand characteristics that reflect the development stage, competition and structure of the forests.

 Further information
For further information, refer to Hülsmann _et al_. (2016) Does one model fit all? patterns of beech mortality in natural forests of three European regions. _Ecological Applications_.

fagus-sylvatica

display_name: fagus-sylvatica

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves

mortality-models

display_name: mortality-models

primeval-forests

display_name: primeval-forests

tree-mortality

display_name: tree-mortality

en: Data from: Does one model fit all? patterns of beech mortality in natural forests of three European regions


maintainer: Franziska Gerber

en: landuse wrf static-data cryowrf cosmo-wrf topography

en: Documentation

en: Documentation of the dataset

en: Static data for WRF - Landuse

en:
Example GEOGRID.TBL to use with the 1s static data;
Note about naming:
* 121 -> 1-2-1 topography smoothing applied to dataset
* 1 -> one smoothing cycle applied to the data (needs to be changed depending on the chosen resolution to avoid too steep slope angles)

en: Example namelist.wps to use with the 1s static data

en: Static data for WRF - Topography

en: Static data for WRF - Soiltype bottom

en: Static data for WRF - Soiltype top

en: Static input data (topography, landuse and soiltype) for the WRF preprocessing system WPS is provided for Switzerland and its neighboring countries between 45-49 N and 4-12 E. The data is provided at a resolution of 1 s. Topography is based on the Aster dataset, while landuse is extracted from the Corine landuse dataset. Soil type is set to silty clay loam for the entire domain. This static input data is valid for WRF and CRYOWRF.

cryowrf

display_name: cryowrf

landuse

display_name: landuse

static-data

display_name: static-data

topography

display_name: topography

wrf

display_name: wrf

en: High resolution static data for WRF over Switzerland


maintainer: Avalanche Warning Service SLF

en: Avalanche fatalities per year in Switzerland since 1936/1937

en:
Attention: this data is not updated after 2022 anymore.
This dataset contains the statistics on the number of avalanche fatalities per hydrological year in Switzerland. The data set commences with the beginning of the hydrological year 1936/37 on 01/10/1936. After the completion of a hydrological year, the new data is appended to the existing dataset.
The following information is contained (by column and column title):
 - hydrological year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)
The definition for these four categories as described in the guidelines to the avalanche accident database:
**tour**:
activities include back-country ski, snowboard or snow-shoe touring
**offpiste**:
access from ski area, generally from the top of a skilift with short hiking distances
**transportation.corridors** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people travelling or recreating on open or temporarily closed
transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)
**buildings** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people inside or just outside buildings, and workers on high alpine building
sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Number of avalanche fatalities per hydrological year in Switzerland since 1936-1937


en: urban-ecology sense-of-place electrodermal-activity place-attachment landscape

en: 00. EDA Raw Data

en: 05. Visuals

en: 02. Questionnaire Data

en: 04. Scripts

en: 03. Publication Ready Data

en: 01. EDA Processed Data

en: This repository contains data on EDA measurements of visitors with different cultural backgrounds in virtual urban park settings. The parks are a Persian garden (Shiraz, Iran) and a historical park in Zurich, Switzerland. The cultural background of the visitors is Persian and Central European. The repository contains raw data from EDA, processed time series and statistical procedures.

electrodermal-activity

display_name: electrodermal-activity

landscape

display_name: landscape

place-attachment

display_name: place-attachment

sense-of-place

display_name: sense-of-place

urban-ecology

display_name: urban-ecology

en: Electrodermal Activity (EDA) of Bi-cultural Visitors In Virtual Park Settings


en: root-zone endmember-mixing-models review ecohydrology uncertainties plant-water-uptake stable-water-isotopes

en: Data set of MEE-20-04-264 (CSV)

en: Data set of MEE-20-04-264

en: The following two tables contain information about the data sources of the values reported in Table 1 and 2 in the paper “Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources” published in the journal ‘Methods in Ecology and Evolution’.

en: The following two tables contain information about the data sources of the values reported in Table 1 and 2 in the paper “Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources” published in the journal 'Methods in Ecology and Evolution'.

ecohydrology

display_name: ecohydrology

endmember-mixing-models

display_name: endmember-mixing-models

plant-water-uptake

display_name: plant-water-uptake

review

display_name: review

root-zone

display_name: root-zone

stable-water-isotopes

display_name: stable-water-isotopes

uncertainties

display_name: uncertainties

en: Data set of: Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources


photogrammetric-drone-data-dorfberg

maintainer: Yves Bühler

title_for_slug: photogrammetric-drone-data-dorfberg

en: uav orthophoto snow snow-distribution dsm drone-data snow-depth-mapping photogrammetry

en: Data Access

en:
- 3cm-resolution Orthophoto
- 10cm-resolution DSM
- 10cm-resolution snow depth raster
- original RGB images
- Agisoft Metashape Report

All products are also available as a cloud optimized geotiff.

en: The data was collected with a Wingtra Gen II drone and a Sony RX1R II sensor. In total, 10 flights were conducted at different dates, both in summer and winter. A DSM, an orthophoto, a snow depth raster and the original drone images from every flight are available at a high resolution (10cm and 3cm, respectively).

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

snow

display_name: snow

snow-depth-mapping

display_name: snow-depth-mapping

snow-distribution

display_name: snow-distribution

uav

display_name: uav

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Photogrammetric Drone Data Dorfberg


maintainer: Merin Reji Chacko

en: spatial-ecology dna-metabarcoding environmental-dna biomonitoring biodiversity-assessment

en: Analysis and Figures

en: This zipped file includes R scripts and the datasets required to run the analyses. A README describes the columns in each dataset.

en: Field Metadata

en: Information concerning the locations and times of sampling, as well as the identity of the samplers and relevant comments.

en: Genomic data

en: Fastq files, primer descriptions and the final output dataset.

en: This dataset contains the results of a five-day field excursion which the extent to which eDNA sampling can capture the diversity of a region with highly heterogeneous habitat patches across a wide elevation gradient through multiple hydrological catchments of the Swiss Alps. Using peristaltic pumps, we filtered 60 L of water at five sites per catchment for a total volume of 1 800 L. Using an eDNA metabarcoding approach focusing on vertebrates and plants, we detected 86 vertebrate taxa spanning 41 families and 263 plant taxa spanning 79 families across ten catchments. This dataset includes two sets of data. The first (Genomic data) includes all the necessary data for the bioinformatic pipeline, whereas the second (Analysis Figures) contains tidied data and scripts for the reproduction of all figures/analyses in the article describing this study.

biodiversity-assessment

display_name: biodiversity-assessment

biomonitoring

display_name: biomonitoring

dna-metabarcoding

display_name: dna-metabarcoding

environmental-dna

display_name: environmental-dna

spatial-ecology

display_name: spatial-ecology

en: Vertebrate and plant taxa recovered from 10 catchments in Vaud using an eDNA-metabarcoding approach


en: energy mountain photovoltaic irradiance albedo snow reflection

en: PV Data

format: XLS

en: Windows users use the 7-zip app to extract the zip-file.

en:
 Overview
The SUNWELL Modelling Environment is a combination of data and code that models electricity production from satellite-derived irradiance data and other spatial data sets for all of Switzerland. This ensemble accompanies the publication "The bright side of PV production in snow-covered mountains", published in the Proceedings of the National Academy of Science and reproduces all results and figures of. Code and resources are in their original form (with documentation). A new version with a more generalized application to PV modelling and with more flexibility in terms of input and output formats will be released in the coming months.

 Format
All code is written and has to be executed in Matlab. The input and output data sets are also in the Matlab-specific .mat format. Whenever publicly available, the original data is provided as geotif, .xlsx or other common format.
This is the case for:

- Digital Elevation Model (InputsFromMatlab/MSG/OriginalData/ASTERDEM),
- Landsurface cover type (InputsFromMatlab/MSG/OriginalData/CORINE),
- Population Density (InputsFromMatlab/MSG/OriginalData/popdensRaster,
- Electricity production from three of our validation sites (/Validation/WSL),
- Measured irradiance for two validation sites (/Validation/ASRB)
The ‘Metadata’ documents in the respective folders provide further information about the data sources and processing. Figures are produced either in .pdf or .png format.

 Structure
The central level of the SUNWELL environment holds the 5 Mains, which run the different modelling aspects of the paper; each code is documented separately. Additional code is located in the ‘DataProcessing’ and the ‘functions’ folder. Functions are called in the different Mains.

‘InputsFromMatlab’ contains the radiation and albedo input data sets in separate subfolders (SIS/SISDIR/ALB). The original data is not publicly available, but can be requested for research purposes free of charge. We provide a processed subset of the data set that was used to run the SUNWELL simulations. The MSG subfolder contains additional spatial input data sets.

‘Outputs’ contains the output files from the different mains (matching names, Main_CHallpixels.m  Prod_CHallpixels)

‘Publication_figures’ contains all individual figures from the PNAS publication, as well as the generating code (/code_plot) and the power point figures (/ppts) that provide the combined final figures.

‘Validation’ contains the data sets used in the model validation:

- Electricity production from three of our validation sites (/WSL),
- Measured irradiance for two validation sites (/ASRB)

Electricity production from a validation site at Lac des Toules in Wallis (/LDT), this data set was provided under an NDA and cannot be made publicly available.

Paper Citation:
 > _Annelen Kahl; Jérôme Dujardin; Michael Lehning (2018). Dataset on PV Production in Snow Covered Mountains. PNAS - Proceedings of the National Academy of Sciences. (in press)_

albedo

display_name: albedo

energy

display_name: energy

irradiance

display_name: irradiance

mountain

display_name: mountain

photovoltaic

display_name: photovoltaic

reflection

display_name: reflection


maintainer: Paraskevi Georgakaki

en: liquid-water-content ice-water-content swiss-alps ice-crystal-number-concentration blowing-snow jungfraujoch wrf secondary-ice-production

en: Observational data

en:
The .zip file contains 6 .csv files including all microphysical measurements taken at the Jungfraujoch station during the two periods of interest:

* 25-28 January 2014 : northwesterly-winds (NW)
* 29 January - 1 February 2014 : southeasterly-winds (SE)

The total Ice Crystal Number Concentration (ICNC; reported in L⁻¹) is measured by the two-dimensional stereo hydrometeor spectrometer (2D-S; Lawson et al., 2006) over the size range 10-1280 μm. The total ice water content (IWC; reported in gm⁻³) is also derived by the 2D-S data using the Brown and Francis (1995) mass-diameter relationship. Finally, the quantification of the liquid water content (LWC; reported in gm⁻³) is based on the liquid droplet size distribution data derived from a DMT cloud droplet probe (CDP; Lance et al., 2010) over the size range 2-50 μm. The frequency of the measurements in the .csv files is 30 min, to match the output frequency of the model. Datetime is also reported in the files (DD/MM/YYYY h:mm) in UTC.

Acknowledgment: Collection and pre-processing of the microphysical measurements has been performed by Gary Lloyd (gary.lloyd@manchester.ac.uk). More details about the instrumentation during the CLACE2014 campaign can be found in Lloyd et al. (2015).

en: WRF outputs

en:
The .zip file contains all the NetCDF outputs produced by the mesoscale Weather Research and Forecasting (WRF) model (version: 4.0.1). Two case studies were simulated in this study, between 25-28 January 2014 (00:00 UTC) and 29 January - 1 February 2014 (00:00 UTC), respectively. The former is denoted as "NW" and the latter as "SE", owing to the prevailing wind conditions at the Jungfraujoch (JFJ) station.

The outputs come from the innermost domain of the simulations with a spatial resolution of 1 km and are extracted from the nearest to JFJ model grid point (46.55°N 7.98°E). The dimensions of each model variable is [145,100], which corresponds to time and height, respectively. The frequency of the outputs is 30 min. Note that the first 24 hours of each simulation (i.e., the first 48 outputs) were considered spin up time.

The following sets of sensitivity simulations were presented in this study:

* CNTRL_NW.nc, CNTRL_SE.nc : Sensitivity simulations performed with the default version of WRF
* DS_PHILL_NW.nc, DS_PHILL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Phillips et al. (2018)
* DS_SULL_NW.nc, DS_SULL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Sullivan et al. (2018)
* PHILL_NW.nc, PHILL_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Phillips et al. (2017)
* TAKAH_NW.nc, TAKAH_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Sullivan et al. (2018) based on Takahashi et al. (1995)
* TAKAHrim_NW.nc, TAKAHrim_SE.nc : Same set-up as before but applied only to collisions between rimed ice particles
* BIPS_Xk0_DY_NW.nc, BIPS_Xk0_DY_SE.nc : Sensitivity simulations including a source of Xk0 (either 10.0 or 100.0 L⁻¹) ice crystals with sizes of DY (either 10 or 100 μm) in the first atmospheric level of the model
* BIPS100_PHILL_NW.nc, BIPS100_PHILL_SE.nc : Sensitivity simulations where the combined effect of blowing snow and ice-ice collisional break-up is examined

en:
This repository contains all WRF model outputs and observational data sets used for the paper:
Georgakaki, P., Sotiropoulou, G., Vignon, É., Billault-Roux, A.-C., Berne, A., and Nenes, A.: Secondary ice production processes in wintertime alpine mixed-phase clouds, Atmos. Chem. Phys. Discuss., https://doi.org/10.5194/acp-2021-760, in review, 2021.

blowing-snow

display_name: blowing-snow

ice-crystal-number-concentration

display_name: ice-crystal-number-concentration

ice-water-content

display_name: ice-water-content

jungfraujoch

display_name: jungfraujoch

liquid-water-content

display_name: liquid-water-content

secondary-ice-production

display_name: secondary-ice-production

swiss-alps

display_name: swiss-alps

wrf

display_name: wrf

educ

en: Education, culture and sport

en: Data for the publication "Secondary ice production processes in wintertime alpine mixed-phase clouds"


maintainer: Giulia Francesca Azzurra Donati

en: biodiversity integrated-modelling ecological-corridors circuit-theory human-dominated-landscapes urban-spatial-planning

en: Amphibian monitoring data

en: Processed amphibian occurrence data (2017-2019) in the cantons of Aargau and Zürich. The dataset includes information for the following species: _Alytes obstetricans_,_Bombina variegata_, _Bufo bufo_, _Hyla arborea_, _Ichtyosaura alpestris_, _Lissotriton helveticus_, _Lissotriton vulgaris_, _Rana temporaria_, _Salamandra salamandra_, and _Triturus cristatus_.

en: Amphibian breeding sites of national importance - cantons of Aargau and Zürich

en: Amphibian breeding sites of national importance (focal nodes) in the cantons of Aargau and Zürich, 30x30 m resolution, binarised ascii format.

en: Amphibian species specific landscape resistance maps.

en: For each amphibian species we used the weighted average Ensemble model suitability map and converted it to a resistance map using an exponential decay function following (Duflot et al., 2018) using the species-specific mpa threshold previously computed (Preau et al., 2020). The function assigns a resistance value of 1,000 when habitat suitability equals zero, and a value of one when habitat suitability is greater than or equal to the binarization threshold. The exponential shape strengthens the barrier effect of less favorable areas.

en: Amphibian whole life cycle predictors - 10m resolution

en:
Amphibian whole life cycle predictors include 6 variable types:
(1)	Topographic – slope [°]: derived from the Swiss Topographical Landscape model (swissTLM 3D 2015) at 2 m resolution (elevation uncertainty ± 0.5m) and, subsequently, aggregated to a median value;
(2)	Hydrologic: two predictors including nearest distance to water [m] (all water-related objects and rasterized lotic, lentic and reedbeds from the regional cadastral maps – AV: Daten der Amtliche Vermessung) and runoff coefficient [C] (between 0 and 1 relating amount of runoff to amount of precipitation, mapped AV: Daten der Amtliche Vermessung data against literature values for different land covers);
(3)	Edaphic – soil moisture variability (not available): can gathered from the spatial modelling of Ecological Indicator Values in Switzerland (Descombes et al., 2020) and resampled from 100m to 10m;
(4)	Vegetation: we calculated the median and standard deviation of the Normalized Difference Vegetation Index (NDVI) from all available cloud free Sentinel-2 pixels available between April and October for the years 2016 to 2019 (Drusch et al., 2012) and the median vegetation height [m] (not available) can gathered from Ginzler and Hobi (2015);
(5)	Land-use derived: includes three predictors, grassland density [grassland/cell] (not available) - can be gathered from Pazur et al. (2021), total grasslands area evaluated using a spatial weight matrix and a 250m neighborhood radius around each cell; urbanization [buildings/cell] – average building density for a 250m neighborhood around each cell based on the AV: Daten der Amtliche Vermessung ; and traffic intensity [vehicles/day] – average daily vehicle count (Nationales Personenverkehrsmodells);
(6)	Movement-ecology related: includes three predictors of proximity – nearest forest distance [m]; nearest rock-gravel and sandy area (RGS) distance [m] and nearest road distance [m] (considering any road type) – all calculated based on the AV: Daten der Amtliche Vermessung maps.

en: Binarized "green" and "grey" landcover data (Cantons of Aargau and Zürich)

en: "Green" landcover refers to lawns and vegetated urban surfaces such as, for example private gardens, public parks, cemeteries, green stripes along roadsides, etc. While "grey" landcover refers to impervious grounds such as roads, troittoirs, other impervious. Binarized maps, 30x30m resolution.

en: The data includes (1) amphibian occurrence data (2017-2019) for ten species across the cantons of Aargau and Zürich gathered from the Coordination Center for the Protection of Amphibians and Reptiles of Switzerland (http://www.karch.ch), (2) amphibian whole-life cycle environmental predictors (i.e. topographic, hydrologic, edaphic, vegetation, land-use derived, movement-ecology related), and (3) local urban "green" and "grey" landcover data which can be used to identify opportunities for Blue-Green Infrastructure (through green or grey transitions) in support of regional landscape connectivity.

biodiversity

display_name: biodiversity

circuit-theory

display_name: circuit-theory

ecological-corridors

display_name: ecological-corridors

human-dominated-landscapes

display_name: human-dominated-landscapes

integrated-modelling

display_name: integrated-modelling

urban-spatial-planning

display_name: urban-spatial-planning

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Amphibian and urban-rural landscape data Swiss Lowlands


maintainer: Rebecca Mott

en: turbulent-sensible-heat-fluxes eddy-covariance-measurements dischmex patchy-snow-covers snow-patch

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.5 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.2 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 3.2 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (DA-600, Kaijo-Denki) in 0.3 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.3 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.6 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 1.7 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 0.7 m.

en: Gletschboden setup

media_type: image/png

en: Background map based on data © 2014/2016 swisstopo (JD100042)

format: PNG

mimetype: image/png

en: Output explanation

en:
This dataset contains eddy-covariance measurements in the ablation period of 2014-2016. Measurements were taken from two turbulence towers over a long-lasting snow patch, which are 5 m apart from each other (2014 and 2015). The turbulence towers were equipped with two YOUNG ultrasonic anemometers mounted 0.7 m (in 2014) and 3.3 m (in 2015) above snow-free ground, two ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) mounted at 2.6 m (in 2014) and 2.2 m (in 2015) above snow-free ground and one anemometer (DA-600, Kaijo Denki) mounted at 0.3 m above snow surface.

The measurement setup changed in 2016 and includes a measurement above the snow-free ground in upwind direction (Swiss coordinates: 790191/176689). The measurement tower is equipped with one ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 3.3 m above the snow-free ground. Additionally, one measurement tower is installed above the long-Lasting snow patch and equipped with the same setup as 2015.

Turbulence data were sampled at a frequency of 20 Hz. The processing of the data to quality controlled fluxes has been done with the Biomicrometeorology flux software (Thomas et al., 2009). The program applies plausibility tests and a despiking test after Vickers and Mahrt (1997) on the measured data. The routine further applies a time-lag correction and considers the deployment (e.g. the sonic azimuth). A frequency response correction (Moore, 1986) is done and a three-dimensional rotation is performed. Finally, quality assurance/quality control (QA/QC) flags after Foken et al., (2004) are issued and fast Fourier transform power and co-spectra are calculated. The change in snow height is considered in the post-processing for every measurement day. The turbulence data were averaged to 30 minute intervals.

dischmex

display_name: dischmex

eddy-covariance-measurements

display_name: eddy-covariance-measurements

patchy-snow-covers

display_name: patchy-snow-covers

snow-patch

display_name: snow-patch

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

educ

en: Education, culture and sport

en: DISCHMEX - Impact of extreme land-surface heterogeneity on micrometeorology over spring snow-cover


weather-station-klosters

maintainer: Maxime Hervo

title_for_slug: weather-station-klosters

en: raclets temperature wind klosters weather precipitation

en: Weather Station Klosters

en: All in one weather station measuring temperature (°C), humidity (%), wind (m s‾ ¹) and precipitation type. The time format is: number of days from January 0, 0000, UTC.

en: A weather station (Lufft WS600) measured meteorological parameters at Klosters (LON: 9.880413, LAT: 46.869019). Detailed information on the specifications can be found [here](https://www.lufft.com/products/compact-weather-sensors-293/ws600-umb-smart-weather-sensor-1832/productAction/outputAsPdf/).

klosters

display_name: klosters

precipitation

display_name: precipitation

raclets

display_name: raclets

temperature

display_name: temperature

weather

display_name: weather

wind

display_name: wind

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: radiation weisfluhjoch shortwave-radiation davos longwave-radiation

en: Metadata

en: DATA ACCESS

en: ASRB radiation station at the Weissfluhjoch versuchsfeld.

en: Processing doc

en: Description of processing code that was ported to R by P. Frei (2016).

en: Parameter file

en: Description of ASRB parameters.

mimetype: text/plain

en:
Incoming and outgoing shortwave and longwave 2 min radiation measurements at the Weissfluhjoch research site, Davos, CH. The experimental site at the Weissfluhjoch (WFJ, 46.83 N, 9.81 E) is located at an altitude of 2540 m in the Swiss Alps near Davos. During the winter months, almost all precipitation falls as snow at this altitude. As a consequence, a continuous seasonal snow cover builds up every winter, with a maximum snow height ranging from 153–366 cm over the period 1934–2012. The measurement site is located in an almost flat part of a southeast oriented slope.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

davos

display_name: davos

longwave-radiation

display_name: longwave-radiation

radiation

display_name: radiation

shortwave-radiation

display_name: shortwave-radiation

weisfluhjoch

display_name: weisfluhjoch

en: ASRB_WFJVF: Shortwave and longwave radiation measurements (2 min) at the Weissfluhjoch research site, Davos


automatic-detection-of-avalanches

maintainer: Matthias Heck

title_for_slug: automatic-detection-of-avalanches

en: snow hidden-markov-model avalanche-activity seismic monitoring

en: Results and Scripts

en: This zip package contains the classification results, coherence results, reference data set, python scripts used for the classification and the start and end times for the pre-processed continuous seismic data. A further readme file is also include for more detailed information.

en: This dataset contains the results obtained by an automatic classification using hidden Markov models of a continuous seismic dataset. To avoid long computational times, we reduced the seismic data using pre-processing step. The start and end times of the windows used for the classification are also included in this dataset. Furthermore, an avalanche reference data set is included and the python scripts used to perform the processing steps and the classification.

avalanche-activity

display_name: avalanche-activity

hidden-markov-model

display_name: hidden-markov-model

monitoring

display_name: monitoring

seismic

display_name: seismic

snow

display_name: snow

educ

en: Education, culture and sport

en: Automatic detection of avalanches


en: snow-density snow-depth model-calibration-data model-validation-data snow-water-equivalent

en: swe2hs calibration and validation data

en:
 Contents of this archive

 README.md

 A readme file containing a description of the other files.

 automatic_stations_validation_data.csv

 Daily data from the automatic weather stations used for validation.

 Data sources and providers are listed in the SWE2HS paper, Table 1.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * site_id: code for the measurement site
  - HS_interpolated: boolean flag for interpolated values
  - SWE_interpolated: : boolean flag for interpolated values

 coordinates_swe2hs_paper_stations.csv

 Coordinates of all measurement sites used in the SWE2HS paper.

 Columns:

  * site_id: code for the measurement site
  * location_name: location name of the measurement site
  * lon_[wgs84]: longitude in WGS84
  * lat_[wgs84]: latitude in WGS84
  * elevation_[m]: atitude of the measurement site in [m]
  * dataset: dataset in which the station is included

 manual_station_calibration_data.csv

 Calibration data from the Swiss manual observer stations. Long station records
 trmmed to 15 random water-years.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * SWE_from_profile_[m]: biweekly measurement from the SWE in the measurement
   pit. Corrected with the bulk density in order to match the snow depth from
   the measurement stake. Please refer to the paper for further details.
  * site_id: code for the measurement site

 manual_stations_validation_data.csv

 Validation data from the Swiss manual observer stations. Remaining water-years
 from the long sttaion record not used for the calibration data.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * SWE_from_profile_[m]: biweekly measurement from the SWE in the measurement
   pit. Corrected with the bulk density in order to match the snow depth from
   the measurement stake. Please refer to the paper for further details.
  * site_id: code for the measurement site

 manual_stations_used_deltasnow_parameters.csv

 Site specific DeltaSNOW model parameters used for the calculation of the daily
 SWE series in 'manual_stations_calibration_data.csv' and
 'manual_stations_validation_data.csv'.

 Parameters were optimized by reducing RMSE to the biweekly snow pit SWE measurements.
 Please refer to the paper for further details.

 A python implementation of the DeltaSNOW model was used for the calculation:
 pydeltasnow (https://pypi.org/project/pydeltasnow/)

 For a detailed description of the DeltaSNOW model parameters please see the
 respective publication:

 Winkler, M., Schellander, H., & Gruber, S. (2021). Snow water equivalents
 exclusively from snow depths and their temporal changes: the Δ snow model.
 Hydrology and Earth System Sciences, 25(3), 1165-1187.

 Columns:

  * site_id: code for the measurement site
  * rho_max: Maximum density of an individual snow layer produced by the DeltaSNOW model in [kg/m3]
  * rho_null: Fresh snow density for a newly created layer [kg/m3
  * c_ov: Overburden factor due to fresh snow [-]
  * k_ov: Defines the impact of the individual layer density on the compaction due to overburden [-]
  * k: Exponent of the exponential-law compaction [m3/kg]
  * tau: Uncertainty bound [m]
  * eta_null: Effective compactive viscosity of snow for “zero-density” [Pa s]

en:
The data in this repository was used for the calibration and validation of the
SWE2HS model in the following publication:
Aschauer, J., Michel, A., Jonas, T., & Marty, C. (2023). An empirical model to calculate snow depth from daily snow water equivalent: SWE2HS 1.0. Geoscientific Model Development Discussions, 1-19. https://doi.org/10.5194/gmd-2022-258
Contains daily snow water equivalent and snow depth timeseries from stations in the European Alps.

model-calibration-data

display_name: model-calibration-data

model-validation-data

display_name: model-validation-data

snow-density

display_name: snow-density

snow-depth

display_name: snow-depth

snow-water-equivalent

display_name: snow-water-equivalent

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: SWE2HS model calibration and validation data


en: arctic sea-salt-aerosol antarctica ice snow

en: Table 2

en: This table lists all NEXAFS data files in chronological order with PE carbon to oxygen signal intensity ratios -from which the atomic ratio were calculated in the paper - before ("preCtoO") and after ("postCtoO") each NEXAFS measurement. Also listed is the change in Na ("lossSodi"), O ("lossOxy"), Cl ("lossChlor"), and C ("lossCarb") signal intensity after the NEXAFS measurement compared to prior to the NEXAFS measurement.

en: Fig 1F_2

en: Individual data to mean shown in Figure 1F

en: Fig 1D

en: Data to Figure 1D

en: Fib 1B_3

en: Individual data to mean shown in Figure 1B

en: This table lists all data files in chronological order. "SampleTemp" refers to the reading of the PT-1000 at the side of the sample holder. "cellPressure" is the water vapour pressure during the measurements. From this, in presence of ice, the temperature of the ice sample can be calculated which is given in the column "iceTemp". "dT" is the difference, or temperature offset, between sensor's reading and the ice samples temperature. The offset is due to the sensor being mounted away from the cooled spot of the sample were it experiences heating from warmer parts of the sample holder. The off-set is used to calibrate the temperature sensor and the resulting temperature during the experiments is given in the column "temperature". "relHum" is the relative humidity above (supercooled) liquid and "concBrine" is the concentration of a NaCl solution in mol/l in equilibrium with ice at the experimental temperature. "Area" is the integrated PE signal.

en: Fig 1F_1

en: Fig 1B_2

en: Code

en: Matlab code to read and plot the data

en: Fig 1B

en: Data in Figure 1B

en: Fig 1A

en: Data Figure 1A

en: Fig 1F

en: Data to Figure 1F

en: Fig 1E

en: Data to Figure 1E

en: Read Me

en: Description of the data tables

en: Fig 1B_1

en: Laboratory experiments are presented on the phase change at the surface of sodium chloride – water mixtures at temperatures between 259 K and 240 K. High selectivity to the upper few nanometres of the frozen solution – air interface is achieved by using electron yield near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. We present the NEXAFS spectrum of the hydrohalite.

en: Data set on interfacial supercooling and the precipitation of hydrohalite in frozen NaCl solutions by X-ray absorption spectroscopy


maintainer: Anita C. Risch

en: weed-management herbivory grassland native-plant non-native-plant

en: Correction: Data file native and non-native plant interactions in Australian grasslands

en:
taxa tab:	list and overview of all the recorded species

* family:                 family of the plant

* genus:                genus of the plant

* species:                plant species name

* origin:                indicates whether the plant is native to Australia or not (non-native)

* common name:	        common name of the plant species

* functional group:	        functional group of the plant species: forb, graminoid, fern, tree

* functional group detailed:	gives more detail about the type of graminoid and forb: legume, forb (non-leguminous),
                        grass, sedge, rush, fern, tree

* lifeform:                annual or perennial lifeform (species which can have both of these lifeforms where
                        considered as annuals)

plot tab:	list of species found in each plot and their cover (%)

* sampling.session:        provides information about the sampling time:
                        May2020 = data that was collected in May 2020
                        Nov2020 = data that was collected in November 2020

* farm.name:	            name of the farms where the sampling took place:
                        SF = farm of the Southern group
                        NF = farm of the Northern group
                        numbers 1-3 = randomly allocated to the Southern group of farms
                        numbers 4-6 = randomly allocated to the Northern group of farms

* site.type:	                KG: Kangaroo grass dominated site
                        ALG: ALG+KG site (Kangarooo grass and African lovegrass co-dominated site)

* plot.no:                plot number: 9-12

* scientific.name:	        scientific name of the plant species found in a certain plot

* functional group:	        indicates whether the species found is a tree, forb, graminoid or fern

* functional group detailed:	indicates whether the species found is a tree, legume, forb (non-leguminous),
                        grass, sedge, rush, fern

* lifeform:                specifies the lifeform of the species: annual or perennial lifeform
                        (species which can have both of these lifeforms where considered as annuals)

corrections tab:	Detailed description of corrections made in plot.data tab

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Schlierenzauer, C., Risch, A.C., Schütz, M., Firn, J. 2021. Non-native Eragrostis curvula reduces plant species diversity in pastures of South-eastern Australia even when native Themeda triandra remains co-dominant. Plants 10, 596._

Please cite this paper together with the citation for the datafile.

Study area
The study was conducted in the lowland grassy woodlands of the Bega Valley Region, which is located in the south-east corner of New South Wales, Australia. Embedded between the Pacific Ocean and the Australian Alps, the lowland grassy woodlands are mostly located on granitic substrates and reach elevations of roughly 500 m above sea level. Typically, these grassy woodlands receive less precipitation (mean annual precipitation between 700-1100 mm) compared to the more elevated areas that surround them (NSW Government - Office of Environment and Heritage 2017).
The vegetation is dominated by an open tree canopy layer consisting of Eucalyptus tereticornis Sm, Angophora floribunda Sm. (Sweet) and a range of other eucalypt species. Sometimes shrub or small trees are also present, whereas grasses and forbs form the ground-cover. In areas without intensive agricultural history, this layer is dominated by perennial, tussock grasses such as Themeda triandra Forssk, Microlaena stipoides R.Br (Weeping Grass), Eragrostis leptostachya Steud. (Paddock Lovegrass) and Echinopogon ovatus P.Beauv (Forest Hedgehog Grass). The remaining inter-tussock spaces are occupied by a diversity of growth-restricted grasses and herbaceous forbs (NSW - Department of Planing, Industries and Environment 2019; NSW Government - Office of Environment and Heritage 2017).
Clearing, pasture sowing, fertilizer application and livestock grazing resulted in a dramatic decrease in the extent of these natural woodlands, with less than five percent within conservation reserves and overall, with only about 20% of their original extent in New South Wales still existing (Tozer et al. 2010). The remaining areas outside of reserves are threatened by altered fire frequencies, habitat clearing, livestock grazing and especially by non-native plant invasion, particularly Eragrostis curvula (Schrad.) Nees. For this reason, the grassy woodlands are listed as an endangered ecological community in the NSW state legislation. Additionally, they are considered as critically endangered by the Commonwealth of Australia (Threatened Species Scientific Committee (TSSC) 2013).

Experimental design and sampling
The study was conducted on six farms and in each of them two sites were chosen, representing a paired design. One of the sites at each farm is dominated by native Themeda triandra, the other one co-dominated by non-native Eragrostis curvula and Themeda triandra. All farms are within a radius of approximately 10 km from the town Candelo. Three of the farms are located North (36°40’ to 36°42’ S and 149°38’ to 149°42’ E) and three of them are located South (36°51’ to 36°49’ S and 149°38’ to 149°42’ E) of Candelo.
Non-native herbivores (mainly cattle, sheep and rabbits) and native herbivorous marsupials (mainly kangaroos, wallabies and wombats) are present in the area of these sites. On each site, data was collected within four plots (each 1 x 1 m) in May and November 2020. All plant species found within a plot were recorded and their relative abundance was estimated.

References
NSW - Department of Planing, Industries and Environment. 2019. “Lowland Grassy Woodland in the South East Corner Bioregion - Endangered Ecological Community Listing.” https://www.environment.nsw.gov.au/topics/animals-and-plants/threatened-species/nsw-threatened-species-scientific-committee/determinations/final-determinations/2004-2007/lowland-grassy-woodland-south-east-corner-bioregion-endangered-ecological-community-l (February 18, 2021).
NSW Government - Office of Environment and Heritage. 2017. “Lowland Grassy Woodland in the South East Corner Bioregion - Profile.” https://www.environment.nsw.gov.au/threatenedSpeciesApp/profile.aspx?id=20070 (January 31, 2021).
Threatened Species Scientific Committee (TSSC). 2013. Environment Protection and Biodiversity Conservation Act 1999 (EPBC Act) Conservation Advice for Lowland Grassy Woodland in the South East Corner Bioregion. http://www.environment.gov.au/biodiversity/threatened/communities/pubs/82-conservation-advice.pdf.
Tozer, Mark et al. 2010. “Native Vegetation of Southeast NSW: A Revised Classification and Map for the Coast and Eastern Tablelands.” Cunninghamia : a journal of plant ecology for eastern Australia 11(3): 359–406.

grassland

display_name: grassland

herbivory

display_name: herbivory

native-plant

display_name: native-plant

non-native-plant

display_name: non-native-plant

weed-management

display_name: weed-management

educ

en: Education, culture and sport

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Native and no-native plant interactions in Australian grasslands


biogas-aus-hofdunger-in-der-schweiz

title_for_slug: biogas-aus-hofdunger-in-der-schweiz

en: review biogas switzerland manure bioenergy

en: Biogas aus Hofdünger in der Schweiz

en: Ziel dieses Whitepapers ist es, Entscheidungsträgern, Verwaltungen und Stakeholdern die aktuellsten Forschungsergebnisse zur Verfügung zu stellen, um die optimale Nutzung von Bioenergie aus Hofdünger in der Schweizer Energiewende zu fördern. Zu diesem Zweck werden die Ergebnisse des Schweizer Kompetenzzentrums für Bioenergieforschung - SCCER BIOSWEET - zusammengefasst und in einem breiteren Kontext dargestellt. Wenn nichts anderes erwähnt wird, beziehen sich die Ergebnisse auf die Schweiz und im Falle der Ressourcen auf die heimischen Biomassepotenziale.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland


maintainer: Marco Moretti

en: wild-bee anthophila predictive-modelling switzerland resource-availability climate functional-diversity hymenoptera protected-areas urbanization community-indices elevation-gradient beta-diversity biodiversity

en: Variable importance, model evaluation, partial dependence plots

en: The compress file containes a set of txt files with the variable importance, the model evaluation metrics and the partial dependence plots of each of the responses used (alpha and beta taxonomic and functional diversity metrics; community weighted means of 8 functional traits)

en: Deprecated-Predictors

en:
The compress file includes the rster files of the predictors used in the analyses, including the climate, resource availability, land-use and beekeeping intensity metrics.

The raster on the climate contains the PCA axes on the CHELSA variables.
The raster on resource availability contains the PCA axes on plant communities
The raster on land-use contains the land-use composition at 2500 m.
The raster on beekeeping intensity contains thedensity of hives within 2500 m

en: Wild bee trait data

en: Text file containing the scores of the 8 used traits. The data originates from the European trait database (compiler: Stuart Roberts; pollinator loss module of the EU- FP6 ALARM project).

en: Spatial environmental predictors and responses

en:
The .zip file contains the rasters of the environmental predictors and the predicted responses:
-  **Environmental predictors.**:

  -  The raster on the climate contains the PCA axes on the CHELSA variables.

  -  The raster on resource availability contains the PCA axes on plant communities

  -  The raster on land-use contains the land-use composition at 2500 m.

  -  The raster on beekeeping intensity contains thedensity of hives within 2500 m

-  **Responses**:
- The predicted responses without masking the waterbodies (Diversity_stack_revised_Selected_descriptors.tif).
- The predicted responses masking the waterbodies (masked.stack.all.diversity.tiff).

en: Protected areas

en: Protected areas considered, divided in three groups and rasters: protected areas sensu stricto, protected areas sensu lato and all protected areas

en: Elevation and waterbodies

en: Zip file containing two rasters: the digital elevation model of Switzerland and the waterbodies of Switzerland.

en: Taxonomic and functional metrics in the community plots

en:
Response data used for the modeling.
Lat: latitude community plot
Lon: longitude community plot
Richness: species richness
Shannon: Shannon diversity index
FDis: functional dispersion
TOP: Trait Onion Peeling (functional richness)
TED: Trait Even Distribution (functional evenness)
LCBD_taxo: local community contributions to taxonomic beta diversity
LCBD_fun: local community contributions to functional beta diversity
ITD: community weighted means inter-tegula distance
feeding_specialization: community weighted means feeding specialization
tong_length: community weighted means tongue length
phenostart: community weighted means start of the phenology
phenoduration: community weighted means duration of the phenoloy
cleptoparasite: community weighted means cleptoparasites
belowgound: community weighted means proportion belowground
solitary: community weighted means proportion solitary

en:
Raw data supporting the paper "Countrywide wild bee taxonomic and functional diversity reveal a spatial mismatch between alpha and beta-diversity facets across multiple ecological gradients". It contains taxonomic and functional metrics in 3343 community-plots distributed across Switzerland. The calculated metrics are:
- Alpha taxonomic community metrics: species richness and Shannon diversity
- Alpha functional community metrics: Functional richness (using the Trait Onion Peeling index, TOP), functional eveness (using the Trait Even Distribution index, TED) and the functional dispersion.
- Community weighted means of 8 functional traits
- The local community contributions on the functional and taxonomic beta diversity (LCBD).

The dataset also includes the following:
- The used predictors to model the spatial distribution of the community metrics (climate PCA, vegetation PCA, land-use metrics, beekeeping intensity).
-The three types of protected areas, defined according to the protective measures.
- The model evaluation, variable importance and partial dependece data.

anthophila

display_name: anthophila

beta-diversity

display_name: beta-diversity

biodiversity

display_name: biodiversity

climate

display_name: climate

community-indices

display_name: community-indices

elevation-gradient

display_name: elevation-gradient

functional-diversity

display_name: functional-diversity

hymenoptera

display_name: hymenoptera

predictive-modelling

display_name: predictive-modelling

protected-areas

display_name: protected-areas

resource-availability

display_name: resource-availability

urbanization

display_name: urbanization

wild-bee

display_name: wild-bee

en: Data on wild bee taxonomic and functional diversity in Switzerland


maintainer: Frank Hagedorn

en: forest-topsoil dissolved-organic-phosphorus nutrient-fluxes beech soil-temperature phosphorus fertilization zero-tension-lysimeters nitrogen seasons

en:
Data on dissolved organic and inorganic phosphorus and nitrogen concentrations in leachates and their corresponding
fluxes from the litter layer, the Oe/Oa horizon, and the A horizon of two German beech forest sites.
Leachate samples were taken in April 2018, July 2018, October 2018, Feb./Mar. 2019, and July 2019
with zero-tension lysimeters after artificial irrigation. Soil samples were taken in July 2019.
For more details please refer to the publication.

beech

display_name: beech

dissolved-organic-phosphorus

display_name: dissolved-organic-phosphorus

fertilization

display_name: fertilization

forest-topsoil

display_name: forest-topsoil

nitrogen

display_name: nitrogen

nutrient-fluxes

display_name: nutrient-fluxes

phosphorus

display_name: phosphorus

seasons

display_name: seasons

soil-temperature

display_name: soil-temperature

zero-tension-lysimeters

display_name: zero-tension-lysimeters

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Phosphorus and nitrogen leaching from beech forest soils


en: sdms birds arthropods urbanization spiders species-richness-models species-abundance-distributions insects urban-ecology diversity snails

en: abundance and occurrence data of the 1446 species studied, used to investigate species-abundance distributions and species-occurrence distributions

en: contains the raw data to perform the species richness models of the hypercommon species

en: contains the raw data to perform species distribution models, only for common species

en: contains the raw data to perform the species richness models of all species

en: contains the raw data to perform the species richness models of the rare species

en:
Richness, site occurrence and abundance data of bees, beetles, birds, hoverflies, net-wingeds, true bugs, snails, spiders, milipides, wasps collected in the city of Zurich using different sampling techniques, and the environmental variables for each sampling site.
Data are provided on request to contact person against bilateral agreement.

arthropods

display_name: arthropods

birds

display_name: birds

diversity

display_name: diversity

insects

display_name: insects

sdms

display_name: sdms

snails

display_name: snails

species-abundance-distributions

display_name: species-abundance-distributions

species-richness-models

display_name: species-richness-models

spiders

display_name: spiders

urban-ecology

display_name: urban-ecology

en: Ecological properties of urban ecosystems. Biodiversity dataset of Zurich


maintainer: Axel Volkwein

en: field-test experiment trajectory experiments rockfall field-tests mass-movements field-data natural-hazards

en: Overview of all tests

en:
This table gives an overview on all tests performed including
- block used
- start & end position
- number of jumps
- etc.
-

en: Jumps and impacts

en: This table contains data of more than 2200 of each jumps and impacts of the test blocks on a grassy slope. It gives there durations in combination with acting accerlartions and the rotational speed of the blocks. The data were retrieved using the block internal accelerometer and rotation sensors. The combination of these data with the measurement from the local positioning system allows the deduction of jump lengths, slope gradient etc.

en: Block trajectories recorded from local positioning system

en: This file contains more than 80 rockfall trajectories projected onto the terrain, i.e. the positions of the single blocks over time during the single tests that were recorded by the local positioning system with about 10Hz. It contains the detected positions as well as a smoothened path (see Volkwein et al., Geosciences, 2018). The table also contains the derived velocities and accelerations along the slope (attention: these accelerations are the once that occur during an impact).

en: These data contain the point clouds obtained from laser scanning the test slope and the six test blocks used for the experiments. The coordinates of the slope are given in CH-1903 format. The coordinates of the block point clouds are kept in a lokal x/y/z coordinate system.

en:
In summer 2014, 6 rock blocks between 20 and 80kg have been thrown in total 111 times down a slope at the Swiss Oberalppass close to the village Tschamut. The slope was mainly covered by grass and its lower part was flat and large enough to provide natural runouts of the single trajectories.

An extensive measurement program has been set up to measure the block trajectories: With surveyor's instruments the slope and the six used rock blocks were scanned and the start and end positions of each test were recorded. During the single events two cameras filmed the trajectories. A special sensor device located within the blocks recorded the acting accelerations and rotational speeds over time. Further, the device emitted a Wifi signal that got detected from eight receivers around the slope. Based on this signal the block position has been recorded over time.

The dataset contains all data that were gathered through above field campaign.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

mass-movements

display_name: mass-movements

natural-hazards

display_name: natural-hazards

rockfall

display_name: rockfall

trajectory

display_name: trajectory

en: Repetitive trajectory testing in Tschamut 2014


maintainer: Irmi Seidl

en: energy-cooperatives community-energy renewable-energy switzerland cooperatives

en: Codebook

en: Description of variable attributes and valid n

en: Questionnaire with variable names

en: Modified questionnaire with variable names for each item. Should be used together with the data files (.csv or .sav) to reconstruct the data and variable structures.

en: Raw data (.csv)

en: Raw data in csv. format. For comprehension of the data and variable structure, please consult the codebook and the modified questionnaire with variable names.

en: Raw date (SPSS)

en: Raw data in sav. format (SPSS). For comprehension of the data and variable structure, please consult the modified questionnaire with variable names.

en:
 Topic of Survey
The data at hand on energy cooperatives in Switzerland were collected in 2016 as part of the project "Collective financing of renewable energy projects in Switzerland and Germany" of the National Research Programme 71 "Managing Energy Consumption". The cooperatives were surveyed on their organizational structure, their activities in electricity and heat generation, their finances, the political context and their assessments of the future.

 Survey Method
The survey was targeted at all energy cooperatives in Switzerland (this is the basic population). The Swiss Commercial Register was searched for cooperatives and specific keywords in order to determine this basic population and collect addresses. This search in May 2016 resulted in a total of 304 energy cooperatives, to which a questionnaire was sent in July 2016. A pre-test with 8 persons had been carried out before the questionnaire was sent out. The questionnaire was provided in German and French. It was sent by mail and an attached letter referred to a link for the digital version if preferred. The online version was designed with the software "Sawtooth". After three weeks, a first, and after six weeks a second reminder letter was sent to those cooperatives that had not yet completed the questionnaire. The returned hardcopy questionnaires were manually entered into the database and then combined with the electronic data from the online survey. In the course of the survey, the total population was reduced from 304 to 289: in 4 cases the survey was not deliverable, 4 cooperatives had dissolved, 6 were not actually energy cooperatives, 1 case had recently changed its legal form. With a response rate of 47%, the final data set comprises 136 responses (from 77 digital and 59 hardcopy questionnaires). However, not all 136 of the returned questionnaires were filled out completely. We checked for answers that seemed contradictory or incomprehensible. If an error could be clearly identified and the correct answer derived, the answer was adjusted, otherwise the answer was replaced by "missing data".

 Anonymization
Participating cooperatives have been assured that their information will be kept confidential and will only be made public anonymously. For this reason, the data have been anonymized in in order to prevent any identification of individual cooperatives.

 How to Use the Data
* The data are available in CSV and SPSS (sav.) format.
* A codebook and a modified version of the used questionnaire are provided to illustrate the data and variable structure. In the questionnaire, the variable names are assigned to the corresponding questions. In the codebook, further information on these variables (valid n, answer categories) can be found. This information (of the codebook) is already integrated in the SPSS file.

 Current Embargo on Data
These data are currently under embargo and will only be released when the project is completed (not before 2020).

#Additional Information
* The used questionnaire is provided in German and French.
* Descriptive results of the survey were published in a WSL report: https://www.dora.lib4ri.ch/wsl/islandora/object/wsl:18943

community-energy

display_name: community-energy

cooperatives

display_name: cooperatives

energy-cooperatives

display_name: energy-cooperatives

renewable-energy

display_name: renewable-energy

switzerland

display_name: switzerland

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Energy Cooperatives in Switzerland: Survey Results // Energiegenossenschaften in der Schweiz: Befragungsergebnisse


maintainer: EnviDat Support

en: dem drone orthophoto dsm orthoimage findelengletscher gletscher uav sankt-annafirn glacier griesgletscher alps

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 2nd of July 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 28th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 19th of April 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 3rd of August 2015.

en: This .pdf contains an orthoimage for each dataset as well as a Table which displays the number of flights made, image acquired, number of GCP set and the total area covered.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 21th of July 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 09th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of July 2015.

en: Bulk Data Access

en: Link to the S3 bucket where all the data resources can be downloaded in bulk

en: This folder contains all UAV flights paths that we created for the Sankt Annafirn, the Findelengletscher and Griesgletscher. They have been created with the software eMotion2, that was developped for the eBee platform from Sensefly.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 15th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 13th of September 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 15th of August 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 22th of September 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 26th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 30th of August 2016.

en:
 UAV-derived DSMs and orthoimages

Unmanned Aerial Vehicle (UAV) surveys were conducted between 2015 and 2016 on the Sankt Annafirn, Findelen- and Griesgletscher, situated in the Swiss Alps. Three surveys at the Sankt Annafirn allowed for a full glacier coverage, four surveys at Griesgletscher allowed an almost full glacier coverage and seven surveys at Findelengletscher allowed for a partial coverage of the glacier tongue (see individual datasets for exact extent). For each survey, a high resolution orthoimage and a Digital Surface Model (DSM) was created.

 UAV surveys:

Prior flight, Ground Control Points (GCPs) were deployed on the glacier surface and measured with a differential GPS (Trimble R7 or Leica GPS 1200). They allowed precise georeferencing of the UAV-derived datasets. UAV flight plans were planned with the software *eMotion 2* and a SenseFly eBee was used as surveying platform. The images were then processed with the software Agisoft Photoscan Pro 1.1.6 .

The location and dates of each survey can be found in the table together with the number of flights performed (Nflights), the number of acquired images (Nimages), the number of GCPs set (NGCPs) and the surveyed area.

A folder for each dataset is available (see folder name in table), which contains:

- An orthoimage *glacier_date_photoscan_oi_CH1903+_LV95_0.1m.tif*

- A Digital Surface Model *glacier_date_photoscan_dsm_CH1903+_LV95_0.1m.tif*

- The Agisoft Photoscan automatic processing report  *glacier_date_photoscan_report.pdf*

where:

- *glacier* is the name of the surveyed glacier

- *date* is the date of the UAV image acquisition

- *photoscan* is the name of the photogrammetric software

- *oi* or *dsm* the type of dataset

- *CH1903+_LV95* is the coordinate system and datum of the dataset

- *0.1m* is the resolution of the dataset in meter

- *.tif* is the extention of the dataset

Details about the UAV surveys, the image processing and the accuracy of the UAV-derived products can be found in this publication below.

Paper Citation:
 > _Gindraux et al. 2017. Accuracy Assessment of Digital Surface Models from Unmanned Aerial Vehicles’Imagery on Glaciers, Remote Sensing, 9, 186, 1-15, [doi: 10.3390/rs9020186](https://doi.org/10.3390/rs9020186)._

The folder UAV_flight_paths.zip contains all UAV flights performed on the Sankt Annafirn, Findelengletscher and Griesgletscher. The flights were planned with the software eMotion2 and have the .afp extention.

alps

display_name: alps

dem

display_name: dem

drone

display_name: drone

dsm

display_name: dsm

findelengletscher

display_name: findelengletscher

glacier

display_name: glacier

gletscher

display_name: gletscher

griesgletscher

display_name: griesgletscher

orthoimage

display_name: orthoimage

orthophoto

display_name: orthophoto

sankt-annafirn

display_name: sankt-annafirn

uav

display_name: uav

en: UAV-derived Digital Surface Models and orthoimages for three alpine glaciers


wind-crust-formation-snowmicropen-data

title_for_slug: wind-crust-formation-snowmicropen-data

en: wind-packing smp snowmicropen snow wind-crust

en: Processing scripts

en: Contains the R-scripts used to process the SMPs

en: SMP data

en: Links to the dataset

en: README

en: Describes the dataset in detail

en:
This dataset contains the SnowMicroPen (SMP) data from 38 wind tunnel experiments on wind-packing / wind crust formation. These experiments were performed in the winters 2015/16 and 2016/17 and include more than 1000 SMP measurements.

The SMPs are organized per experiment. Each experiment subfolder contains the processed SMP profiles and some additional files.

Please refer to the README for more details on the data. The processing scripts are available for download as well. The scripts are mainly provided as documentation and would need to be adjusted to be used.

This dataset is the basis of the following publication:

Sommer C.G., Lehning M., & Fierz C. (2017). Wind tunnel experiments: Saltation is necessary for wind-packing. Journal of Glaciology, 63(242), 950-958. doi:10.1017/jog.2017.53

smp

display_name: smp

snow

display_name: snow

snowmicropen

display_name: snowmicropen

wind-crust

display_name: wind-crust

wind-packing

display_name: wind-packing

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Wind crust formation: SnowMicroPen data


en: gcos snow snow-height snow-profile snow-water-equivalent

en: DATA ACCESS

en: STATION METADATA

en: Snowprofile from 11 observer sites in Switzerland compiled for the Global Climate Observing System (GCOS). Height of snow (cm) and snow water equivalent (mm) are recorded every 2 weeks since the 1947 (depending on station). Attached metadata file gives details of each station.

gcos

display_name: gcos

snow-height

display_name: snow-height

snow-profile

display_name: snow-profile

snow-water-equivalent

display_name: snow-water-equivalent

en: GCOS SWE data from 11 stations in Switzerland


en: water-temperature discharge model hydrology climate-change-impact

en: Data access

en:
This work presents the first extensive study of climate change impacts on rivers temperature in Switzerland. Results show that even for low emissions scenarios, water temperature increase will lead to adverse effect for both ecosystems and socioeconomic sectors (such as nuclear plant cooling) throughout the 21st century. For high emissions scenarios, the effect will be worsen. This study also shows that water warming in summer will be more important in Alpine regions than in lowlands.
This material is distributed under CC BY 4.0 license (https://creativecommons.org/licenses/by/4.0/legalcode).

climate-change-impact

display_name: climate-change-impact

discharge

display_name: discharge

hydrology

display_name: hydrology

model

display_name: model

water-temperature

display_name: water-temperature

en: Dataset for: Future water temperature of rivers in Switzerland under climate change investigated with physics-based models


en: snow snow-stability-evaluation avalanche-forecast avalanche snowpack

en: SNOWPACK simulations

en: This dataset contains all SNOWPACK simulations, including input files, setup and output files.

en: Extracted data

en: Extracted data contain validation and results published in Richter et al. (2019).

en: README file explaining data structure and content

en: Stability tests

en: Stability tests including csv-files with CT, ECT and PST experiments for each year and each field site.

en: Manually observed snow profiles

en: Manually observed snow profiles as csv-files containing depth [cm], thickness [cm], density [kg m-3], hand hardness, first grain type, second grain type, first grain size [mm], and second grain size [mm] of each layer.

en:
To validate the critical crack length as implemented in the snow cover model SNOWPACK, PST experiments were conducted for three winter seasons (2015-2017) at two field site above Davos, Switzerland. This dataset contains manually observed snow profiles and stability tests. Furthermore, corresponding SNOWPACK simulations are included.
These data were analyzed and results were published in Richter et al. (2019).

Please refer to the Readme file for further details on the data.

These data are the basis of the following publication:
Richter, B., Schweizer, J., Rotach, M. W., and van Herwijnen, A.: Validating modeled critical crack length for crack propagation in the snow cover model SNOWPACK, The Cryosphere, 13, 3353–3366, https://doi.org/10.5194/tc-13-3353-2019, 2019.

avalanche

display_name: avalanche

avalanche-forecast

display_name: avalanche-forecast

snow-stability-evaluation

display_name: snow-stability-evaluation

snowpack

display_name: snowpack

en: Validating and improving the critical crack length in SNOWPACK


maintainer: Jonas Stillhard

en: primeval-beech-forest dem fagus-sylvatica forest-dynamics stand-inventory-data long-term-data-sets forest-structure carpathian-biosphere-reserve forest permanent-forest-plot-data

en: Data description

en: Available online on publishers website

en: Dataset

en:
In 2000, a permanent forest plot of 10 ha has been established in the core zone of the primeval beech forest of Uholka.
 All living and dead trees with a diameter at breast height (DBH) ≥ 60 mm were identified to species, DBH measured, stems tagged and mapped.
Since then, the plot has been remeasured in 2005, 2010, and 2015. In total, 4,820 individual trees were measured with 14,116 individual measurements throughout all four inventories.
In spring 2018, an Airborne Laser Scan was carried out, covering the Uholka‐Shyrokyi Luh forest. This data set allows us to derive a high‐resolution digital elevation model (DEM) of the plot area.
The data set allows for important insights into the development and the spatial and temporal dynamics of primeval beech forests.

carpathian-biosphere-reserve

display_name: carpathian-biosphere-reserve

dem

display_name: dem

fagus-sylvatica

display_name: fagus-sylvatica

forest

display_name: forest

forest-dynamics

display_name: forest-dynamics

forest-structure

display_name: forest-structure

long-term-data-sets

display_name: long-term-data-sets

permanent-forest-plot-data

display_name: permanent-forest-plot-data

primeval-beech-forest

display_name: primeval-beech-forest

stand-inventory-data

display_name: stand-inventory-data

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Stand inventory data from the 10‐ha forest research plot in Uholka, Ukraine


maintainer: Matthias Haeni

en: meteorology wind-speed par climate-change long-term swiss-forest-lab temperature relative-humidity precipitation meteo

en: Data plot of the field station (BAF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Beatenberg)

en: Site aerial photo from both Beatenberg stations. Source: Google. 2016. Site aerial photo from both Beatenberg stations. Retrieved November 11, 2016, from https://www.google.ch/maps

mimetype: image/jpeg

en: Site photo of the field station (BAF)

en: Site photo of the field station from below (viewing upwards the slope).

en: Site photo of the forest station (BAB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Forest station data (BAB)

en: Data file.

en: Field station data (BAF)

en: Data plot of the forest station (BAB)

en:
High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Beatenberg in Switzerland where one station is located within a natural coniferous forest (BAB) with Norway spruce (_Picea abies_; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Beatenberg is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the
Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Beatenberg, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


root-traits

maintainer: Ivano Brunner

title_for_slug: root-traits

en: drought fine-root-traits ingrowth-cores soil-coring belowground-biomass

en: Root-traits

en:
Fine-root traits of Scots pine in response to enhanced soil water availability deriving from long-term irrigation in the Pfynwald

Data_Fig.1.xlsx
Fine-root biomass of the topsoil (0-10 cm) in the dry and irrigated treatment of the Scots pine forest of the years 2003 to 2016 recorded by soil coring

Data_Tab1+2_2005.xlsx
Fine-root traits from roots of ingrowth cores from 2005 after two years of growth in the dry and irrigated treatment of the Scots pine forest

Data_Tab1+2_2016.xlsx
Fine-root traits from roots of ingrowth cores from 2016 after two years of growth, and from roots of the soil-coring sampling from 2016 in the dry and irrigated treatment of the Scots pine forest

belowground-biomass

display_name: belowground-biomass

drought

display_name: drought

fine-root-traits

display_name: fine-root-traits

ingrowth-cores

display_name: ingrowth-cores

soil-coring

display_name: soil-coring

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.