en: land-use-change urban-transformations strategic-spatial-planning spatial-planning land-use-transformations europe large-scale-urban-development-projects strategic-projects

en: QCA data set large-scale urban development projects

en: Please refer to the sections: 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalization in the Metadata for further details on this resource.

en: QCA R script large-scale urban development projects Europe

en:
For the set up of this R script, we used the “QCA” (Duşa, 2019) and “SetMethods” (Oana and Schneider, 2018) R packages.

The following further resources were also used:
Dusa, A. (2019). QCA with R: A comprehensive resource. Springer: Berlin.
Schneider, C. Q., & Wagemann, C. (2012). Set-theoretic methods for the social sciences. A guide to qualitative comparative analysis. Cambridge: Cambridge University Press.
Thomann, E., Oana, I.-E., & Wittwer, S. (2018). Performing fuzzy- and crisp set QCA with R. A user-oriented beginner's guide. Retrieved from http://www.evathomann.com/links/qca-r-manual

en:
Table of Content: 1. General context of the data set "lsUDPs" ; 2. Background and aims of the study using the data set lsUDPs; 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalisation

1. General context of the data set "lsUDPs"
The data set "lsUDPs" has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2020. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, strategic spatial plans) into quantitative land-change modelling approaches at the urban regional level. The first stage (2016-2017) of the CONCUR project focussed on 21 urban regions in Western Europe. The urban regions were selected through a multi-stage strategy for empirical research (see Hersperger, A. M., Grădinaru, S., Oliveira, E., Pagliarin, S., & Palka, G. (2019). Understanding strategic spatial planning to effectively guide development of urban regions. Cities, 94, 96–105. https://doi.org/10.1016/j.cities.2019.05.032 ).

2. Background and aims of the study using the data set lsUDPs
As part of the CONCUR project, a specific task was to examine the relationship between strategic spatial plans and the formulation and implementation (i.e. urban land change) of large-scale urban development projects in Western Europe.
Strategic urban projects are typically large-scale, prominent urban transformations implemented locally with the aim to stimulate urban growth, for instance in the form of urban renewals of deprived neighborhoods, waterfront renewals and transport infrastructures. While strategic urban projects are referred to in the literature with multiple terms, in the CONCOR project we call them large-scale urban development projects (lsUDPs).
Previous studies acknowledged both local and supra-local (or structural) factors impacting the context-specific implementation of lsUDPs. Local governance factors, such as institutional capacity, coordination among public and private actors and political leadership, intertwine with supra-local conditions, such as state re-scaling processes and devolution of state competencies in spatial planning, de-industrialisation and increasing social inequality. Hence, in implementing lsUDPs, multi-scalar factors act in combination.
Because the formulation and implementation of lsUDPs require multi-scalar coordination among coalitions of public and private actors over an extended period of time, they are generally linked to strategic spatial plans (SSPs). Strategic spatial plans convey collective visions and horizons of action negotiated among public and private actors at the local and/or regional level to steer future urban development, and can contain legally binding dispositions, but also indicative guidelines.
The key question remains as to what extent large-scale urban development projects and strategic spatial plans can be regarded as aligned. By alignment, or “concordance”, we mean that strategic projects are formulated and implemented as part of the strategic planning process (“high concordance”), or that the strategic role of projects is reconfirmed in (subsequent) strategic plans (“moderate concordance”). Lack of concordance is found when lsUDPs have been limitedly (or not at all) acknowledged in strategic spatial plans.
We assume that certain local and supra-local factors, characterising the development of the projects, foster (but not strictly “cause”) the degree of alignment between lsUPDs and SSPs. In this study, we empirically examine how, and to what extent, the concordance between 38 European large-scale urban development projects and strategic plans (outcome: CONCOR) has been enabled by five multi-scalar factors (or conditions): (i) the role of the national state (STATE), (ii) the role of (inter)national private actors (PRIVATE), (iii) the occurrence of supra-regional external events (EVENTS), (iv) the degree of transport connectivity (TRANSP), and (v) local resistance from civil society (RESIST). We adopted a (multi-data) case-based qualitative strategy for empirical research and applied the formalised procedure of within- and cross-case comparison offered by fuzzy-set Qualitative Comparative Analysis appropriate for the goal of this study. Based on set theory, QCA formally integrates contextual sensitivity to case specificities (within-case knowledge) with systematic comparative analysis (across-case knowledge).
The research question the data set has been created to reply to is the following: which conditions, and combinations of conditions, enable the concordance between large-scale urban development projects and strategic spatial plans?
The conditions (“independent variables”) considered are. STATE: the set of large-scale urban projects characterized by a high degree of state intervention and support in their formulation and implementation, PRIVATE: the set of large-scale urban projects characterized by a high degree of involvement of (inter)national private actors in their formulation and implementation, EVENTS: the set of large-scale strategic projects whose formulation and implementation have been strongly affected by unforeseen international events and/or global trends, TRANSP: the set of large-scale strategic projects with a high degree of road and/or transit connectivity, and RESIST: set of large-scale strategic projects whose realization has been characterized by resistances that have substantially delayed or modified the project implementation.
The outcome (“dependent variable”) under analysis is CONCOR: the set of large-scale urban projects having a high degree of concordance/alignment/integration with strategic spatial plans

3. The data set lsUDPs

   3.1 Selection of cases and data collection
To generate the current data set on large-scale urban development projects in European urban regions (data set "lsUDPs"), we identified 35 large-scale urban development projects in a sample of the 21 Western urban regions considered in the CONCUR project (see supra, Hersperger et al. 2019): Amsterdam, Barcelona, Copenhagen, Hamburg, Lyon, Manchester, Milan, Stockholm, Stuttgart. The criteria we followed to identify the 35 large-scale urban development projects are: geographical location, size (large-scale), site (located either in the city core or in the larger urban region) and urban function (e.g. housing, transportation infrastructures, service and knowledge economic functions). Employing these criteria facilitated the selection of diverse large-scale urban development projects while still ensuring sufficient comparability.
In 2016, we performed 47 in-depth interviews with experts in urban and regional planning and large-scale strategic projects and infrastructure (i.e. academics and practitioners) about the formulation, implementation and development (1990s–2010s) of each project in each of the 9 selected urban regions. On average, each interviewee answered questions on 3.1 large-scale urban development projects. Three cases were subdivided into two cases because a clear differentiation between specific implementation stages was identified by the interviewees (expansion of the Barcelona airport, cases “bcn_airport80-90” and “bcn_airport00-16”; realisation of Lyon Part-Dieu, cases “lyo_partdieu70-90” and “lyo_partdieu00-16”; MediaCityUK, cases “man_salfordquays80-00” and “man_mediacityuk00-16”). Therefore, from the initial 35 cases, the final number of analysed cases in the lsUDPs dataset is 38.

    3.2 The data set lsUDPs: Data management and operationalisation
Interviews were fully transcribed and analysed through MAXQDA (version 12.3, VERBI GmbH, Berlin, Germany), and intercoder agreement was evaluated on a sample of nine interviews. We also compiled “synthetic case descriptions” (SCD) for each case (totalling more than 160 SCDs) to spot potential inconsistencies among interviewees’ accounts and to facilitate completion of the “calibration table” for each case (see below). An online expert survey distributed to the interviewees (response rate 78%) helped systematise the information collected during the interviews. We also consulted both academic and gray literature on the case studies to check for possible ambiguity and inconsistencies in the interview data, and to solve discrepancies between our assigned set membership scores and questionnaire values. Site visits were also carried out to retrieve additional information on the selected cases.
For each case (i.e. each of the 38 selected large-scale urban development projects), we operationalised each condition (i.e. STATE, PRIVATE, EVENTS, TRANSP, RESIST) and the outcome (CONCOR) in terms of sets, for subsequent application of Qualitative Comparative Analysis. This process is called “calibration”; we used a number of indicators for each condition to qualitatively assess each large-scale project across the conditions. The case-based qualitative assessment was then transformed into fuzzy-set membership values. Fuzzy-set membership values range from 0 to 1, and should be conceived as “fundamentally interpretative tools” that “operationalize theoretical concepts in a way that enhances the dialogue between ideas and evidence” (Ragin 2000:162, in “Fuzzy-set Social Science”. Chicago: University Press). We employed a four-value fuzzy-set scale (0, 0.33, 0.67, 1) to “quantify” into set membership scores the individual histories of cases retrieved from interview data. Only the condition TRANSP was calibrated as a crisp-set (0, 1).
The translation of qualitative case-based information into numerical fuzzy-set membership values was iteratively performed by populating a calibration table following standard practices recently emerged in QCA when dealing with qualitative (interview) data.

europe

display_name: europe

land-use-change

display_name: land-use-change

land-use-transformations

display_name: land-use-transformations

large-scale-urban-development-projects

display_name: large-scale-urban-development-projects

spatial-planning

display_name: spatial-planning

strategic-projects

display_name: strategic-projects

strategic-spatial-planning

display_name: strategic-spatial-planning

urban-transformations

display_name: urban-transformations

en: lsUDPS Large-scale urban development projects in European urban regions


maintainer: EnviDat Support

en: sentinel-2 time-series video-encoding gridded-data research-data-management raster core geodata

state: active

type: dataset

en: View publication in the Digital Object Repository at WSL (DORA)

media_type: text/html

format: HTML

en:
Shell script to reproduce the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software for working with CORE will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

format: SERVICE

en:
Shell script to extract data from the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en: CORE Dataset (80 GB)

en:
DISCLAIMER: CORE is still in development. Interested parties are warmly invited to join common development, to comment, discuss, find bugs, etc.

Acknowledgement: The CORE format was proudly inspired by the Cloud Optimized GeoTIFF ([COG](https://www.cogeo.org/)) format, by considering how to leverage the ability of clients issuing HTTP GET range requests for a time-series of remote sensing and aerial imagery (instead of just one image).

License: The Cloud Optimized Raster Encoding (CORE) specifications are released to the public domain under a Creative Commons 1.0 CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

-----------------------

Summary:
The Cloud Optimized Raster Encoding (CORE) format is being developed for the efficient storage and management of gridded data by applying video encoding algorithms. It is mainly designed for the exchange and preservation of large time series data in environmental data repositories, while in the same time enabling more efficient workflows on the cloud. It can be applied to any large number of similar (in pixel size and image dimensions) raster data layers. CORE is not designed to replace COG but to work together with COG for a collection of many layers (e.g. by offering a fast preview of layers when switching between layers of a time series).

WARNING: Currently only applicable to RGB/Byte imagery. The final CORE specifications may probably be very different from what is written herein or CORE may not ever become productive due to a myriad of reasons (see also 'Major issues to be solved').

With this early public sharing of the format we explicitly support the Open Science agenda, which implies "shifting from the standard practices of publishing research results in scientific publications towards sharing and using all available knowledge at an earlier stage in the research process" (quote from: European Commission, Directorate General for Research and Innovation, 2016. Open innovation, open science, open to the world).

CORE Specifications:

1) a MP4 or WebM video digital multimedia container format (or any future video container playable as HTML video in major browsers)

2) a free to use or open video compression codec such as H.264, VP9, or AV1 (or any future video codec that is open sourced or free to use for end users)

Note: H.264 is currently recommended because of the wide usage with support in all major browsers, fast encoding due to acceleration in hardware (which is currently not the case for AV1 or VP9) and the fact that MPEG LA has allowed the free use for streaming video that is free to the end users. However, please note that H.264 is restricted by patents and its use in proprietary or commercial software requires the payment of royalties to [MPEG LA](https://www.mpegla.com/programs/avc-h-264/). However, when AV1 matures and accelerated hardware encoding becomes available, AV1 is expected to offer 30% to 50% smaller file size in comparison with H.264, while retaining the [same quality](https://trac.ffmpeg.org/wiki/Encode/AV1).

3) the encoding frame rate should be of one frame per second (fps) with each layer segmented in internal tiles, similar to COG, ordered by the main use case when accessing the data: either layer contiguous or tile contiguous;

Note: The internal tile arrangement should support an easy navigation inside the CORE video format, depending on the use case.

4) a CORE file is optimised for streaming with the moov atom at the beginning of the file (e.g. with -movflags faststart) and optional additional optimisations depending on the codec used (e.g. -tune fastdecode -tune zerolatency for H.264)

5) metadata tags inside the moov atom for describing and using geographic image data (that are preferably compatible with the [OGC GeoTIFF standard](https://www.ogc.org/standards/geotiff) or any future standard accepted by the geospatial community) as well as list of original file names corresponding to each CORE layer

6) it needs to encode similar source rasters (such as time series of rasters with the same extent and resolution, or different tiles of the same product; each input raster should be having the same image and pixel size)

7) it provides a mechanism for addressing and requesting overviews (lower resolution data) for a fast display in web browser depending on the map scale (currently external overviews)

Major issues to be solved:

- Internal overviews (similar to COG), by chaining lower resolution videos in the same MP4 container for fast access to overviews first); Currently, overviews are kept as separate files, as external overviews.

- Metadata encoding (how to best encode spatial extent, layer names, and so on, for each of the layer inside the series, which may have a different geographical extent, etc...; Known issues: adding too many tags with FFmpeg which are not part of the standard MP4 moov atom; metadata tags have a limited string length.

- Applicability beyond RGB/Byte datasets; defining a standard way of converting cell values from Int16/UInt16/UInt32/Int32/Float32/Float64/ data types into multi-band Byte values (and reconstructing them back to the original data type within acceptable thresholds)

Example

Notice: The provided CORE (.mp4) examples contain modified Copernicus Sentinel data [2018-2021].

For generating the CORE examples provided, 50 original Sentinel 2 (S-2) TCI data images from an area located inside Switzerland were downloaded from www.copernicus.eu, and then transformed into CORE format using ffmpeg with H.264 encoding using the [x264 library](https://www.videolan.org/developers/x264.html).

For full reproducibility, we provide the original data set and results, as well scripts for data encoding and extraction (see resources).

core

display_name: core

geodata

display_name: geodata

gridded-data

display_name: gridded-data

raster

display_name: raster

research-data-management

display_name: research-data-management

time-series

display_name: time-series

video-encoding

display_name: video-encoding

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester


en: jupyter density buffer roads geospatial gis

en: Plots

media_type: application/zip

en: Random plot locations

format: ZIP

mimetype: application/zip

en: Road data from OSM for the surroundings of Menzberg, Switzerland

en: Road Density Calculation (Python Notebook) online

en:
This dataset contains the road and plot data used for the geospatial analysis example showcased in "Fostering Open Science at WSL with the EnviDat Environmental Data Portal", a contribution to the 5th Open Source Geospatial Research and Education Symposium (OGRS), 2018.
The example uses Jupyter Notebook to calculate road densities in the neighbourhood of sample plot locations with Python. Road data were extracted from OpenStreetMap, while the point data (sample plots) were generated manually.

buffer

display_name: buffer

density

display_name: density

geospatial

display_name: geospatial

gis

display_name: gis

jupyter

display_name: jupyter

roads

display_name: roads

en: Dataset for OGRS 2018 publication


maintainer: Esther Frei

en: stillberg mountain-ecology long-term-experiment treeline-ecosystems literature-review

en: The Stillberg bibliography (Stillberg_bibliography_v1.zip) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals (Stillberg_bibliography_data_v1.csv) along with the metadata file (Stillberg_bibliography_metadata_v1.csv). Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title.

en:
 Background information

The Stillberg ecological treeline research site in the Swiss Alps was established in 1975, with the aim to develop ecologically, technically, and economically sustainable reforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Over almost fifty years, research at the Stillberg site combined long-term monitoring of the large-scale high-elevation afforestation with experimental manipulations simulating global change impacts. Besides providing a scientific basis and practical guidelines for high-elevation afforestation, this research has contributed to a comprehensive understanding of ecological processes in the treeline ecotone across different compartments and scales, from individual trees, non-tree vegetation and soils to whole ecosystems, in the context of global change resulting in more than 150 publications.

 Dataset generation

We compiled a comprehensive list of scientific publications covering research at the Stillberg research site by conducting searches in the literature databases Web of Science and Google Scholar, as well as in the Digital Object Repository of the Swiss Federal Institute for Forest, Snow and Landscape Research WSL (DORA). We compiled all publications about the afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, the G-TREE experiment, as well as other studies related to the Stillberg research site.

 Data description

The Stillberg bibliography (Stillberg_bibliography_data_v1.csv) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals. Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title. The bibliography is described in a metadata file (Stillberg_bibliography_metadata_v1.csv). The bibliography along with the metadata file are provided in a ZIP-folder (Stillberg_bibliography_v1.zip).

literature-review

display_name: literature-review

long-term-experiment

display_name: long-term-experiment

mountain-ecology

display_name: mountain-ecology

stillberg

display_name: stillberg

treeline-ecosystems

display_name: treeline-ecosystems

en: Bibliography of the long-term treeline research site Stillberg, Switzerland


maintainer: Thomas Wohlgemuth

en: soil-impacts biodiversity forest-management pairwise-stand-comparisons biogeography

en: headers

en: Description of headers for data_wohlgemuth_etal_Neobiota_2022

media_type: text/csv

en: Baseline data

format: CSV

en: references

en: Bibliography of all references cited in data_wohlgemuth_etal_Neobiota_2022.

format: XLS

en: Compiled data on the impacts of seven important NNTs (Acacia dealbata, Ailanthus altissima, Eucalyptus globulus, Prunus serotina, Pseudotsuga menziesii, Quercus rubra, Robinia pseudoacacia) on physical and chemical soil and biodiversity in Europe, and summarise commonalities and differences. A total of 107 publications considered, studies referred to biodiversity attributes and soil properties: 2804 lines and 30 rows.

biodiversity

display_name: biodiversity

biogeography

display_name: biogeography

forest-management

display_name: forest-management

pairwise-stand-comparisons

display_name: pairwise-stand-comparisons

soil-impacts

display_name: soil-impacts

en: Impact of non-native tree species in Europe on soil properties and biodiversity: a review


lwf-tea-bag-sites

maintainer: Marcus Schaub

title_for_slug: lwf-tea-bag-sites

en: litter forest modeling verification green-tea roiboos tea-bag decomposition carbon

en: Site Information

en: Descriptive information on sites

mimetype: text/csv

en:
Decomposition of plant litter is a key process for the transfer of carbon and nutrients in ecosystems. Carbon contained in the decaying biomass is released to the atmosphere as respired CO2, and may contribute to global warming. Litterbag studies have been used to improve our knowledge of the drivers of litter decomposition, but they lack comparability because litter quality is plant species-specific. The use of commercial tea bags as a standard substrate was suggested in order to harmonize studies, where green tea and rooibos represent more labile and more recalcitrant C compounds as surrogates of local litter.
The tea bag approach was implemented on eight sites of the Swiss long-term Forest Ecosystem Research (LWF) network (https://www.wsl.ch/LWF). This allowed us to take advantage from the existing infrastructure and data from a previous litterbag study with local litter. In Beatenberg and Schaenis, additional elevation transects were established (1200-1800 m and 540-1150 m, respectively) to examine particularly the effect of temperature on decomposition. In Pfynwald (https://www.wsl.ch/de/ueber-die-wsl/versuchsanlagen-und-labors/flaechen-im-wald/pfynwald.html) and Salgesch, infrastructure of running projects was used to examine the effect of drought and understory removal, respectively. In Novaggio, tea bags were incubated in summer and winter to study the effect of seasonality particularly precipitation. Tea bags are collected after 3, 12, 24, and 36 months; for the two time-shifted experiments additionally after 6 and 9 months.
The study has two primary objectives. Firstly, it contributes to TeaComposition initiative (http://teacomposition.org/) which aims at investigating long-term litter decomposition and its key drivers at present as well as under different future climate scenarios using a common protocol and standard litter (tea) across nine terrestrial biomes. Secondly, the data are used to further develop decomposition models such as Yasso (http://en.ilmatieteenlaitos.fi/yasso) which is used by several countries, including Switzerland to estimate the annual carbon fluxes in dead wood, litter, and soil for reporting in National Greenhouse Gas Inventories under the United Nations Framework Convention on Climate Change and the Kyoto Protocol.

carbon

display_name: carbon

decomposition

display_name: decomposition

forest

display_name: forest

green-tea

display_name: green-tea

litter

display_name: litter

modeling

display_name: modeling

roiboos

display_name: roiboos

tea-bag

display_name: tea-bag

verification

display_name: verification

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: LWF-Tea bag sites


disdrometer-data-gotschnagrat

title_for_slug: disdrometer-data-gotschnagrat

en: raclets hydrometeors visibility disdrometer precipitation

en: Disdrometer Data Gotschnagrat

en: The zip folder contains one netCDF file per day for Gotschnagrat from February 11 to March 27 2019 with a temporal resolution of 30 seconds (time in UTC). The naming convention for the files is Gotschna_YYYYMMDD.nc and the files include the following: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

en: A laser optical disdrometer (Parsivel² , OTT Hydromet) was deployed at Gotschnagrat (LON: 9.849, LAT: 46.859) to measure hydrometeors by extinction when passing a laser beam. The instrument can classify eight different kinds of precipitation, including rain, hail, snow, drizzle, and hybrid forms. The dataset contains information on precipitation amount and type for the period of February 11 to March 27 2019 at Gotschnagrat.

disdrometer

display_name: disdrometer

hydrometeors

display_name: hydrometeors

precipitation

display_name: precipitation

raclets

display_name: raclets

visibility

display_name: visibility


maintainer: Yohann Chauvier

en: random-stratified-sampling survey-effort background-data plant-species covariate-correction environmental-stratification cluster point-process-model independent-dataset target-group

en: Non-copyright data, scripts, diversity outputs

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models


maintainer: Dirk Nikolaus Karger

en: random-forests mammals iucn range-maps chelsa interannual-climate-variability reptiles generalized-linear-models species-distribution-models sdm amphibians niche-models generalized-additive-models climate-variablity

media_type: text/plain

en: Readme file containing the file naming convention, file dimensions, and variable names

format: TXT

en: File containing the climate predictors as SAGA grid files (.sgrd)

en: Reptiles

en: Species distribution models based on different climate predictor groups

en: File containing the record dimension, genus, and species of the respective netcdf files

en: Mammals

en: Amphibians

en: We modelled the global distribution of 730 amphibian, 1276 reptile, and 1961 mammal species globally as a function of current climate at a 0.5° spatial resolution using four different predictor groups composed of different combinations of input variables: mean climatic conditions, spatial climatic variability, and temporal (interannual) climatic variability.

amphibians

display_name: amphibians

chelsa

display_name: chelsa

climate-variablity

display_name: climate-variablity

generalized-additive-models

display_name: generalized-additive-models

generalized-linear-models

display_name: generalized-linear-models

interannual-climate-variability

display_name: interannual-climate-variability

iucn

display_name: iucn

mammals

display_name: mammals

niche-models

display_name: niche-models

random-forests

display_name: random-forests

range-maps

display_name: range-maps

reptiles

display_name: reptiles

sdm

display_name: sdm

species-distribution-models

display_name: species-distribution-models

en: Global species distributions for mammals, reptiles, and amphibians


en: range-maps species-observations species-distribution hard-limit r-package occurrence-records synonyms conservation ecoregions taxonomy gbif filtering flags landsca large-scale accepted-name

en: gbif.range R package version 1.1 (current)

en: gbif.range R package version 0.2 (deprecated)

en: wsl.gbif R package version 0.1 (deprecated)

en: Test version, not to be used.

en: GitHub URL

en: Although species range may be obtained using expert maps or modeling methods, expert data is often species-limited and statistical models need more technical expertise as well as many species observations. When unavailable, such information may be extracted from the Global Biodiversity Information facility (GBIF), the largest public data repository inventorying georeferenced species observations worldwide. However, retrieving GBIF records at large scale may be tedious if users are unaware of specific tools and functions that need to be employed. Here we present *gbif.range*, an R library that contains automated methods to generate species range maps from scratch using in-house ecoregions shapefiles and an easy-to-use GBIF download wrapper. Finally, this library also offers a set of additional very useful parameters and functions for large GBIF datasets (generate doi, extract GBIF taxonomy, records filtering...). [gbif.range R project](https://github.com/8Ginette8/gbif.range)

accepted-name

display_name: accepted-name

conservation

display_name: conservation

ecoregions

display_name: ecoregions

filtering

display_name: filtering

flags

display_name: flags

gbif

display_name: gbif

hard-limit

display_name: hard-limit

landsca

display_name: landsca

large-scale

display_name: large-scale

occurrence-records

display_name: occurrence-records

r-package

display_name: r-package

species-distribution

display_name: species-distribution

species-observations

display_name: species-observations

synonyms

display_name: synonyms

taxonomy

display_name: taxonomy

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: gbif.range - An R package to generate species range maps based on ecoregions and a user-friendly GBIF wrapper


maintainer: Athanasios Nenes

en: supersaturation sigma-w cloud-modeling cloud-droplets wolfgangpass raclets

en: Predicted cloud droplet numbers (kappa=0.25) Weissfluhjoch

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Davos Wolfgang station between February 24 and March 8 2019. For this, as a sensitivity test, a hygroscopicity parameter of 0.25 is assumed, which is the upper limit determined from the analysis carried out for Weissfluhjoch (https://www.envidat.ch/dataset/ccn-hygroscopicity-predicted-cloud-droplet-numbers-weissfluhjoch). The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Predicted cloud droplet numbers (kappa=0.1) Davos Wolfgang

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Davos Wolfgang station between February 24 and March 8 2019. For this, as a sensitivity test, a hygroscopicity parameter of 0.1 is assumed, which is the lower limit determined from the analysis carried out for Weissfluhjoch (https://www.envidat.ch/dataset/ccn-hygroscopicity-predicted-cloud-droplet-numbers-weissfluhjoch). The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Cloud droplet properties were predicted between February 24 and March 8 2019 for the measurement site Davos Wolfgang (1630 m a.s.l., LON: 9.853594, LAT: 46.835577). Droplet calculations are carried out with the physically based aerosol activation parameterization of Morales and Nenes (2014), employing the “characteristic velocity” approach of Morales and Nenes (2010). Aerosol size distribution observations required to predict the cloud droplet numbers and maximum in-cloud supersaturation are obtained from a Scanning Mobility Particle Size Spectrometer (SMPS) instrument deployed at Davos Wolfgang (https://www.envidat.ch/dataset/aerosol-data-davos-wolfgang). The required vertical velocity measurements are derived from the wind Doppler Lidar (https://www.envidat.ch/dataset/lidar-wind-profiler-data) deployed at the same station and are extracted from the first bin of the instrument, being 200 m above ground level. The hygroscopic properties of the particles measured at Davos Wolfgang could not be estimated, owing to a lack of concurrent CCN measurements. As a sensitivity test, droplet calculations are performed assuming two different values of the aerosol hygroscopicity parameter, 0.1 and 0.25, based on the analysis carried out for Weissfluhjoch. Additional information can be found in Section 2.3 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

cloud-droplets

display_name: cloud-droplets

cloud-modeling

display_name: cloud-modeling

raclets

display_name: raclets

sigma-w

display_name: sigma-w

supersaturation

display_name: supersaturation

wolfgangpass

display_name: wolfgangpass

en: Predicted cloud droplet numbers Davos Wolfgang


disdrometer-data-laret

maintainer: Daniel Wolfensberger

title_for_slug: disdrometer-data-laret

en: visibility precipitation raclets disdrometer hydrometeors

en: Disdrometer Data Laret

en: The zip folder contains one netCDF file per day for Laret from February 7 to March 29 2019 with a temporal resolution of 30 seconds (time in UTC). The naming convention for the files is Laret_YYYYMMDD.nc and the files include the following: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

en:
A laser optical disdrometer (Parsivel² , OTT Hydromet) was used to measure hydrometeors by extinction when passing a laser beam. The instrument can classify eight different kinds of precipitation, including rain, hail, snow, drizzle, and hybrid forms.
The dataset contains information on precipitation amount and type for the period of February 7 to March 29 2019 in Laret.

disdrometer

display_name: disdrometer

hydrometeors

display_name: hydrometeors

precipitation

display_name: precipitation

visibility

display_name: visibility


en: budburst phenology spongy-month chilling hatch

en: Phenology and performance/preference tests Data

en:
-"Synchronex_Cuttings_Pheno.txt" provides the budburst date ('Stage 2') of each twig of the six studies species in the four different temperature treatments ("ambient", "a+5"=Ambient +5°C, 'Greenhouse-5'= Greenhouse at temperature >5°C, 'Greenhouse_10' = Greenhouse at temperature >10°C); 'Success' give the percentage of buds within the twig that succeeded to reach at least stage 2 during the experiment.

'Synchronex-Gypsy.txt' provides the number of eggs that have hatched at each monitoring date (Day of the year in columns); "DOY_hatch_1" corresponds to the first DOY when at least one egg has hatched; "Replicate_egg_mass" correspond to the egg mass replicate (1 to 5)

'PerformanceTest_GypsyMoth.txt' provides the biomass in mg of the caterpillars fed with fresh leaves of each tested tree species during one week. "Fresh_alive" is the biomass of only the living caterpillars after 1 week and "Freshpermoth" corresponds the weight per living caterpillar (Fresh alive/Nalive)

'PreferenceTest_All_species.txt' provides the total surface of leaf disc of each tested tree species remaining after exposing 5 caterpillars to these leaves during 24H. "Total_area" is the surface of the disc of each species measured after 24h exposed to the spongy moth first instars. For each species 'control' means the surface of the disc after 24H without any exposure to the larvae. 'EatenPercent correspond to the percentage surface loss compared to the control.

en: 3 R-Scripts used for the analyses of the temperature, phenology and performance/preference tests

en: Temperature data Spongy moth experiment

en:
4 files with hourly temperature recorded at the height of buds in each of the four temperature treatments:
- Winter6: greenhouse where temperature was kept >6°C over winter
- Winter10: greenhouse where temperature was kept >10°C over winter
- OTC_Ambient: Open Top Chamber at Ambient temperature
- OTC_Warm: Open Top Chamber at +3.5°C warmer temperature

en:
The files correspond to the data and R-script used for the analyses of the following paper "Feasting on the ordinary or starving for the exceptional: phenological synchrony between spongy moth and budburst of European trees in a warmer climate" published in Ecology and Evolution by Vitasse et al. 2023.
There are three zip files corresponding to the Temperature data, phenology/preference/performance tests and R-Scripts for the analyses.

Input data:
'Synchrony_Cuttings_Pheno.txt':

budburst

display_name: budburst

chilling

display_name: chilling

hatch

display_name: hatch

phenology

display_name: phenology

spongy-month

display_name: spongy-month

en: Synchrony between spongy moth hatching and leaf phenology of temperate trees


en: population-genetics drosophila-suzukii nuclear-microsatellite-markers multilocus-genotypes simple-sequence-repeats trichopria-drosophilae biological-control switzerland

en: Multilocus genotypes (biallelic coding for 21 nuclear microsatellites) of Trichopria drosophilae described in Gugerli et al. Agrarforschung Schweiz 2019. Missing data denoted as '999'. Population codes (PopNo) are the following: 1, Vezia; 3, Contone ; 5, Davesco; 6, Corteglia; 7, Mezzana; 8, Stabio; 9, Gordola; 10, Sementina; 12, Brusata di Novazzano; 14, Monteggio; 16, Giubiasco; 17, ComoBP; 18, VD; 19, Weil_D; 20, Dossenheim; 21, BioPlanet_Como. Coordinates (CoordCH_E, CoordCH_N) refer to the Swiss coordinates system CH1903.

en: Table comprising all pertinent information for multiplex PCRs of species-specific nuclear microsatellite makers for Trichopria drosophilae, comprising all 21 newly developed markers, details on full sequences with GenBank accession numbers, primer sequences (including labeling and pig-tails), and repeat motives. PCRs with respective annealing temperatures (AnnealingTemp) refer to Type-It Multiplex PCR Kit (Qiagen, Hilden, Germany).

en:
 Nuclear microsatellite markers and genotype data for _Trichopria ddrosophilae_

This data set comprises (i) the characteristics of a set of 21 species-specific nuclear microsatellites for PCR amplification in _Trichopria drosophilae_ (ii) and genotype data for samples collected in southern Switzerland (Canton of Ticino), with few reference samples from Canton of Vaud, southern Germany, and northern Italy (lab-reared population).
Markers were developed by Ecogenics GmbH, Balgach (Switzerland), using MiSeq Nano 2x250 v2 format (on a mix of 10 individuals). Multiplex PCR assays for multilocus genotyping were established by Ecological Genetics (WSL Birmensdorf), and population genetic analyses are found in Gugerli et al., Agrarforschung Schweiz 2019.

biological-control

display_name: biological-control

drosophila-suzukii

display_name: drosophila-suzukii

multilocus-genotypes

display_name: multilocus-genotypes

nuclear-microsatellite-markers

display_name: nuclear-microsatellite-markers

population-genetics

display_name: population-genetics

simple-sequence-repeats

display_name: simple-sequence-repeats

switzerland

display_name: switzerland

trichopria-drosophilae

display_name: trichopria-drosophilae

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Nuclear microsatellite markers for Trichopria drosophilae, parasitoid wasp on Drosophila suzukii


en: defense-chemistry invasive-species emerald-ash-borer fraxinus ash-dieback intraspecific-variation cross-resistance

en: Raw data-Publication cross-resistance in ash-New Phytologist

en:
What are the research data files about: Raw data on perfomance (dry weight, development and mortality) of emerald ash borer larvae used in published bioassays. Raw data on ash dieback leasion lenghts. Raw data on untargeted and targeted specialized ash metabolites.
Which methods were used: Bioassays in greenhouses and climate chambers to collect data on emerald ash borer and ash dieback perfomance. Phytochemical analyses on ash phloem for quantifiying specialized metabolites
When and where was the data created / extracted: Summer 2020-2021

en:
 What are the research data files about: Raw data on perfomance (dry weight, development and mortality) of emerald ash borer larvae used in published bioassays. Raw data on ash dieback leasion lenghts. Raw data on untargeted and targeted specialized ash metabolites.

Which methods were used: Bioassays in greenhouses and climate chambers to collect data on emerald ash borer and ash dieback perfomance. Phytochemical analyses on ash phloem for quantifiying specialized metabolites.

When and where was the data created / extracted: Summer 2020-2021

ash-dieback

display_name: ash-dieback

cross-resistance

display_name: cross-resistance

defense-chemistry

display_name: defense-chemistry

emerald-ash-borer

display_name: emerald-ash-borer

fraxinus

display_name: fraxinus

intraspecific-variation

display_name: intraspecific-variation

invasive-species

display_name: invasive-species

en: Raw data-Publication cross-resistance in ash - New Phytologist


maintainer: Lyu

en: fagales species-range-map pinales species-distribution-model species-richness species-occurrence

en: Species range maps of species in Fagales and Pinales (with enough occurrences)

en: species_map.zip includes species 1690 range maps generated based on the integrated method described in Lyu et al., (2022). File names with (polygon) indicate that this map is only generated by polygon mapping, as there are not enough occurrences for SDMs.

en: Occurrence maps for species of Fagales and Pinales with few records

en: Point_buffer.zip includes 267 occurrence maps of species that do not have enough occurrence data for polygon mapping.

en:
This database contains 1957 distribution maps of species from Fagales and Pinales constructed based on a method integrating polygon mapping and SDMs (Lyu et al., 2022).
To construct the maps, we first collected occurrence data from 48 different sources. According to the number of occurrences after data cleaning, three kinds of maps are constructed: (1) For species with more than 20 occurrences, we performed SDM and polygon mapping described in Lyu et al. (2022) and select the integration of the two layers as the distribution range; (2) For species with more than 4 but less than 20 occurrences, we only use polygon mapping to draw the distribution range; (3) For species with less than 4 occurrences, a 20-km buffer was generated around the occurrences as the distribution range. The maps were manually checked and evaluated (see Note S3 and Table S9 in Lyu et al., 2022 for details).

fagales

display_name: fagales

pinales

display_name: pinales

species-distribution-model

display_name: species-distribution-model

species-occurrence

display_name: species-occurrence

species-range-map

display_name: species-range-map

species-richness

display_name: species-richness

en: Species distribution maps of Fagales and Pinales (GDPlants)


en: numerical-model vapor-transport snow python pattern-formation

en:
Data and code v1.0 downloaded from the git.

Running the code requires an installation of FEniCS via docker.

en:
This python code uses the Finite Element library FEniCS (via docker) to solve the one dimensional partial differential equations for heat and mass transfer in snow. The results are written in vtk format.

The dataset contains the code and the output data to reproduce the key Figure 5 from the related publication:

_Schürholt, K., Kowalski, J., Löwe, H.; Elements of future snowpack modeling - Part 1: A physical
instability arising from the non-linear coupling of transport and phase changes, The Cryosphere, 2022_

The code and potential updates can be accessed directly through git via:

https://gitlabext.wsl.ch/snow-physics/snowmodel_fenics

numerical-model

display_name: numerical-model

pattern-formation

display_name: pattern-formation

python

display_name: python

snow

display_name: snow

vapor-transport

display_name: vapor-transport

en: A numerical solver for heat and mass transport in snow based on FEniCS


maintainer: Tessa Hegetschweiler

en: childhood forest recreational-activities teenagers adolescents

en: Dataset survey at schools

en: The dataset of the questionnaire survey at schools in excel format.

en: Dataset comments

en: The codebook to the dataset

en: Questionnaire school survey

media_type: application/pdf

en: The questionnaire used in the survey at 8 schools aimed at teenagers in German.

format: PDF

mimetype: application/pdf

en: Survey at schools 2017

en: The dataset of the questionnaire survey at schools in SPSS-format.

en: The data results from a questionnaire survey conducted at 8 schools in the cantons Zurich, Aargau and St. Gallen. Respondents aged 13-22 years. The aim of the survey was to gain insight into teenagers' relationship to the forest, reasons for visiting or not visiting the forest and activities in the forest.

adolescents

display_name: adolescents

childhood

display_name: childhood

forest

display_name: forest

recreational-activities

display_name: recreational-activities

teenagers

display_name: teenagers

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Factors influencing teenagers' forest visit frequency


maintainer: Armin Sigmund

en: evaporation antarctica backward-trajectories isotopic-distillation stable-water-isotopes snow-sublimation lagrangian-analysis

en: Data

en: Modeled data including the data shown in the figures of the related research article

en: Python scripts for data visualization

en: Scripts for generating the figures of the related research article and generating the data files (csv) from the model output

en: Readme

en: Meta data

en: Model code

en: Model Sublimation and Model Air Parcel (python scripts)

en:
 Summary

This data set contains Python programming code and modeled data discussed in a related research article. We developed a simple isotope model to study the drivers of the particularly depleted vapour isotopic composition measured on the ship of the Antarctic Circumnavigation Expedition close to the outlet of the Mertz glacier, East Antarctica, in the 6-day period from 27 January 2017 to 1 February 2017. The model considers the stable water isotopologues H2(16O), H2(18O), and HD(16O). It uses data from the ERA5 reanalysis product with a spatial resolution of 0.25° x 0.25° (Hersbach et al., 2018) and 10-day backward trajectories for the location of the ship, published by Thurnherr et al. (2020a). Our data set includes the model code, Python scripts for visualizing the results, and data produced by the model including the results shown in the figures of the related research article. Here, we summarize the most important model characteristics while further details can be found in the readme.txt file and the related research article including its supporting information.

 Main model characteristics

The modeling approach consists of two steps called *Model Sublimation* and *Model Air Parcel*. The former estimates the isotopic compositions of the snow and sublimation flux across the Antarctic Ice Sheet using an Eulerian frame of reference while the latter models the vapour isotopic composition and specific humidity along air parcel trajectories using a Lagrangian frame of reference. The isotope effects of most phase changes are represented by equilibrium fractionation. Only for ocean evaporation, kinetic fractionation is additionally taken into account (original Craig-Gordon formula). For snow sublimation, two assumptions are tested: *Run E* assumes that sublimation is associated with equilibrium fractionation while *Run N* assumes that sublimation occurs without isotopic fractionation.

 Model Sublimation
Model Sublimation uses a simple one-dimensional mass-balance approach in each grid cell, considering snow accumulation due to snowfall and vapour deposition and snow ablation due to sublimation. The snowpack is represented by 100 layers of equal thickness (e.g., 1 cm) and density (350 kg m-3). The isotopic composition of snowfall is parameterized by generalizing a site-specific, empirical relationship between the daily mean air temperature and snowfall isotopic composition. In the case of vapour deposition, Model Sublimation assumes equilibrium fractionation and estimates the isotopic composition of the atmospheric vapour as the average value for two idealized situations: (i) locally sourced vapour which has the same isotopic composition as the sublimation flux; (ii) non-locally sourced vapour in isotopic equilibrium with snowfall. Model Sublimation is run with a time step of 1 h, independently of Model Air Parcel.

 Model Air Parcel
Every hour, an ensemble of trajectories arrives at different heights in the ABL above the ship. For each of these trajectories, we consider an air parcel with a constant volume of 1 x 1 x 1 m3. The air parcels are initialized at the first suitable time when the trajectories are located in the ABL, either over the ice-free ocean in conditions of evaporation or over snow (Antarctic Ice Sheet or sea ice). Subsequently, the masses of the water isotopologues in the air parcels are simulated with a time step of 3 h, considering vapour uptake or removal due to the moisture flux at the snow or liquid ocean surface (only if the parcel is in the ABL) and cloud/precipitation formation (if the saturation specific humidity is reached). Sea ice is taken into account in a very simplified way. We represent the sea ice by grid cells with a sea-ice cover of more than 90% and assume the isotopic composition of the sublimation flux to be identical to that in the nearest grid cell of the Antarctic Ice Sheet. The isotopic composition of the sublimation flux is taken from Model Sublimation whereas the isotopic composition of the vapour deposition flux (over snow) and condensation flux (over ice-free ocean) is simulated assuming an isotopic equilibrium with the air parcel. Isotope effects of cloud/precipitation formation are represented using the classic Rayleigh distillation model with equilibrium fractionation, where the cloud water is assumed to precipitate immediately after formation.

 References

Hersbach, H., Bell, B., Berrisford, P., Biavati, G., Horanyi, A., Munoz Sabater, J.,... others (2018). *ERA5 hourly data on single levels from 1979 to present. Copernicus Climate Change Service (C3S) Climate Data Store (CDS)*. doi: 10.24381/cds.bd0915c6

Thurnherr, I., Wernli, H., & Aemisegger, F. (2020a). *10-day backward trajectories from ECMWF analysis data along the ship track of the Antarctic Circumnavigation Expedition in austral summer 2016/2017*. Zenodo. doi: 10.5281/zenodo.4031705

antarctica

display_name: antarctica

backward-trajectories

display_name: backward-trajectories

evaporation

display_name: evaporation

isotopic-distillation

display_name: isotopic-distillation

lagrangian-analysis

display_name: lagrangian-analysis

snow-sublimation

display_name: snow-sublimation

stable-water-isotopes

display_name: stable-water-isotopes

en: Modeled Isotopic Composition of Water Vapour Along Air Parcel Trajectories in the Antarctic


maintainer: EnviDat

en: csv nead metadata-convention research-data-management meteorological-data-format

en: PyNEAD (future reference implementation)

en: MeteoIO (future reference implementation)

mimetype: text/html

en: NEAD on GitHub

en: NEAD syntax v0.1 (EBNF)

mimetype: text/plain

en:
Acknowledgement: The NEAD format includes NetCDF metadata and is proudly inspired by both SMET and NetCDF formats. NEAD is designed as a long-term data preservation and exchange format.

The NEAD specifications were presented at the "WMO Data Conference 2020 - Earth System Data Exchange in the 21st Century" (Virtual Conference).

-----------------------

Summary:
The Non-Binary Environmental Data Archive (NEAD) format is being developed as a generic and intuitive format that combines the self-documenting features of NetCDF with human readable and writeable features of CSV. It is designed for exchange and preservation of time series data in environmental data repositories.

License: The NEAD specifications are released to the public domain under a Creative Commons CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

csv

display_name: csv

metadata-convention

display_name: metadata-convention

meteorological-data-format

display_name: meteorological-data-format

nead

display_name: nead

research-data-management

display_name: research-data-management

en: Non-Binary Environmental Archive Data (NEAD) format


maintainer: Yves Bühler

en: release snow hazard-indication-mapping ramms hazard-mapping avalanche

en: Potential Release  Area  NHESS

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en: RAMMS simulations NHESS

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

hazard-mapping

display_name: hazard-mapping

ramms

display_name: ramms

release

display_name: release

snow

display_name: snow

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Automated Avalanche Release Area (PRA) Delineation Davos


aerosol-data-weissfluhjoch

title_for_slug: aerosol-data-weissfluhjoch

en: aerosol particles inp ice-nucleation raclets linda

en: OPC-GT526S Dataset Weissfluhjoch

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en: APS Dataset Weissfluhjoch

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Weissfluhjoch.

mimetype: application/x-netcdf

en: OPC-N3 Dataset Weissfluhjoch

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: SMPS Dataset Weissfluhjoch

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity) in a temporal resolution of 2 minutes, with time in UTC, measured at Weissfluhjoch.

en: LINDA Dataset Weissfluhjoch

en: The LINDA file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Weissfluhjoch (LON: 9.806475, LAT: 46.832964). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs), and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (SMPS 3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3787 TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and LINDA: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l min‾¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the LED based Ice Nucleation Detection Apparatus (LINDA, University of Basel) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

linda

display_name: linda

particles

display_name: particles

raclets

display_name: raclets

en: Aerosol Data Weissfluhjoch


en: snow-depth vertical-wind-motion saltation boundary-layer-winds snow-cover

en: Data Compilation

en: Compressed TXT files

en:
The data correspond to the experiments presented and discussed in a paper regarding the interaction between turbulent wind fluctuations and snow saltation mass-fluxes (Paterna, 2016). Each of the nine data files corresponds to a different experiment presented in the paper and conducted in the winter 2014/2015 in the WSL/SLF cold wind tunnel in Davos. For each file the five columns indicate the time from the beginning of the experiment, the streamwise (u’) and the vertical (w’) wind velocity fluctuations, the streamwise (qx) and the vertical (qz) snow mass-flux components. From these time-series the scales of the snow saltation and of the turbulent flow are obtained with respect to the eddy-cycles and snow saltation cycles. From spectral analysis of the time-series a decoupling of the snow saltation from the turbulence forcing reveals two regimes of interaction: a turbulence-dependent regime occurring with weak saltation, and a turbulence-independent regime with strong saltation. Further details can be found at the link below.

Publication http://onlinelibrary.wiley.com/doi/10.1002/2016GL068171/abstract

boundary-layer-winds

display_name: boundary-layer-winds

saltation

display_name: saltation

snow-cover

display_name: snow-cover

snow-depth

display_name: snow-depth

vertical-wind-motion

display_name: vertical-wind-motion

educ

en: Education, culture and sport

en: Wind tunnel measurement data of drifting snow and turbulent wind fluctuations


en: mass-flux antarctica drifting-snow terrestrial-laser-scanning snowmicropen meteorological-data

en: README

en: Describes the dataset in detail

en: Dataset

en: Links to the dataset

en:
This dataset contains the data acquired during the expedition to Princess Elisabeth Antarctica Station in December 2016 and January 2017. The dataset consits of meterorological data, drifting snow mass flux data, SnowMicroPen data and Terrestrial Laser Scanning data.

Please refer to the README for more information about the data.

This dataset is the basis of the following publication:

Sommer, C. G., Wever, N., Fierz, C., and Lehning, M.: Wind-packing of snow in Antarctica, The Cryosphere Discuss., https://doi.org/10.5194/tc-2018-36, in review, 2018.

antarctica

display_name: antarctica

drifting-snow

display_name: drifting-snow

mass-flux

display_name: mass-flux

meteorological-data

display_name: meteorological-data

snowmicropen

display_name: snowmicropen

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Expedition to Princess Elisabeth Antarctica Station, 2016/2017


en: remote-sensing swe uas snow snow-depth

en: HS map Brämabül, 14. April 2015

media_type: image/tiff

en:
10 cm resolution
15 cm accuracy

format: TIFF

mimetype: image/tiff

en: .tfw file

en: coordinates for the .tif raster

en:
This snow depth map was generated 14 January 2015, close to peak of winter accumulation, applying Unmanned Aerial System digital surface models with a spatial resolution of 10 cm. The covered area is 285'000 m2 at the top of Brämabüel, 2490 m a.s.l. covering all expositions. Coordinate system: CH1903LV03.

A detailed description is given here:

Bühler, Y., Adams, M. S., Bösch, R., and Stoffel, A.: Mapping snow depth in alpine terrain with unmanned aerial systems (UASs): potential and limitations, The Cryosphere, 10, 1075-1088, 10.5194/tc-10-1075-2016, 2016.

Abstract:
Detailed information on the spatial and temporal distribution, and variability of snow depth (HS) is a crucial input for numerous applications in hydrology, climatology, ecology and avalanche research. Nowadays, snow depth distribution is usually estimated by combining point measurements from weather stations or observers in the field with spatial interpolation algorithms. However, even a dense measurement network is not able to capture the large spatial variability of snow depth in alpine terrain.
Remote sensing methods, such as laser scanning or digital photogrammetry, have recently been successfully applied to map snow depth variability at local and regional scales. However, such data acquisition is costly, if manned airplanes are involved. The effectiveness of ground-based measurements on the other hand, is often hindered by occlusions, due to the complex terrain or acute viewing angles. In this paper, we investigate the application of unmanned aerial systems (UAS), in combination with structure-from-motion photogrammetry, to map snow depth distribution. Such systems have the advantage that they are comparatively cost-effective and can be applied very flexibly to cover also otherwise inaccessible terrain. In this study we map snow depth at two different locations: a) a sheltered location at the bottom of the Flüela valley (1900 m a.s.l.) and b) an exposed location (2500 m a.s.l.) on a peak in the ski resort Jakobshorn, both in the vicinity of Davos, Switzerland. At the first test site, we monitor the ablation on three different dates. We validate the photogrammetric snow depth maps using simultaneously acquired manual snow depth measurements. The resulting snow depth values have a root mean square error (RMSE) better than 0.07 to 0.15 m on meadows and rocks and a RMSE better than 0.30 m on sections covered by bushes or tall grass. This new measurement technology opens the door for efficient, flexible, repeatable and cost effective snow depth monitoring for various applications, investigating the worlds cryosphere.

remote-sensing

display_name: remote-sensing

snow

display_name: snow

swe

display_name: swe

uas

display_name: uas

en: UAS based snow depth maps Brämabüel, Davos, CH