bauinventar

soci

fr: Population et société

de: Bevölkerung und Gesellschaft

title_for_slug: bauinventar

fr: batiment inventaire-environnement monument-historique bien-culturel

de: gebaude inventar baudenkmal kulturgut

fr: Lien vers le téléchargement de données (Zip)

de: Link zum Daten-Download (Zip)

fr: Le recensement architectural du canton de Berne décrit et évalue les monuments historiques (objets, ensembles bâtis ou structurés). Il constitue une base solide pour le travail pratique du Service des monuments historiques et pour la recherche scientifique. En publiant le recensement architectural, le Service des monuments historiques fournit aux communes et aux propriétaires, mais aussi à la population, une vue d’ensemble du patrimoine histo-rique du canton. Les données du géoportail sont un extrait actuel et juridiquement non contraignant sur le plan du recensement architectural.. La version légalement valide des recensements architecturaux sont disponibles auprès des communes concernées, dans les préfectures, au Ser-vice des monuments historiques et à l’Office des affaires communales et de l’organisation du territoire. Depuis 2010, toutes les communes du canton ont leur propre recensement. Le recensement architectural des quartiers de la ville de Berne a, quant à lui, été élaboré par le Service des monuments historiques de la ville de Berne. Il est également disponible en ligne (en allemand) : Bauinventar Stadt Bern (https://bauinventar.bern.ch/) Le Service cantonal des monuments historiques révise régulièrement le recensement architectural. Toute modification doit d’abord être mise à l’enquête publique, puis mise en vigueur par une décision de l’Office de la culture du canton de Berne, avant d’être reportée dans le géoportail. Vous trouverez de plus amples informations sur le Service des monuments historiques du canton de Berne ici : Service des monuments historiques (https://www.kultur.bkd.be.ch/fr/start/themen/denkmalpflege.html) et Recensement architectural en ligne (https://www.kultur.bkd.be.ch/fr/start/themen/denkmalpflege/baudenkmaeler-im-kanton-bern/bauinventar/bauinventar-online.html)

de: Das kantonale Bauinventar erfasst, beschreibt und bewertet Baudenkmäler (Einzelobjekte sowie Bau- und Strukturgruppen). Es bildet eine fundierte Grundlage für die praktische Arbeit der Denkmalpflege und für die wissenschaftliche Forschung. Mit dem Bauinventar stellt die Denkmalpflege nicht nur Gemeinden und Grundeigentümerinnen und -eigentümern, sondern auch der breiten Öffentlichkeit eine qualifizierte Gesamtschau des historischen Baubestandes im Kanton zur Verfügung. Die Daten im Geoportal präsentieren einen aktuellen, aber rechtlich nicht verbindlichen Datenauszug aus dem Bauinventar. Die rechtlich verbindliche Ausgabe kann auf den Gemeindeverwaltungen und den Regierungsstatthalterämtern sowie bei der Denkmalpflege und dem Amt für Gemeinden und Raumordnung eingesehen werden. Seit 2010 liegen die Bauinventare für alle Gemeinden des Kantons vor. Die Quartierinventare der Stadt Bern werden durch die städtische Denkmalpflege bearbeitet. Sie sind online zugänglich: Bauinventar Stadt Bern (bauinventar.bern.ch) Das Bauinventar wird durch die kantonale Denkmalpflege regelmässig revidiert. Änderungen müssen zuerst zur öffentlichen Einsichtnahme aufgelegt und per Verfügung durch das kantonale Amt für Kultur in Kraft gesetzt werden, bevor sie im Geoportal abgebildet werden. Weitere Informationen zur Denkmalpflege des Kantons Bern finden Sie hier: Denkmalpflege (https://www.kultur.bkd.be.ch/de/start/themen/denkmalpflege.html) und Bauinventar Online (https://www.kultur.bkd.be.ch/de/start/themen/denkmalpflege/baudenkmaeler-im-kanton-bern/bauinventar/bauinventar-online.html)

fr: Le recensement architectural

de: Bauinventar


regi

fr: Régions et villes

de: Regionen und Städte

en: Regions and cities

it: Regioni e città

envi

fr: Environnement

de: Umwelt

en: Environment

it: Ambiente

fr: gestion-des-ressources-en-eau reseau-de-mesure analyse-de-leau eau-de-surface source cascade eau-substance surveillance-biologique ecosysteme roche qualite-de-leau ressource-en-eau eau-propre-a-la-consommation surveillance-de-leau fond-de-leau extraction-deau eaux-geographie zonage energie percolation diversite-biologique eaux-interieures environnement eaux-souterraines energie-hydraulique organisme-aquatique

de: wasserbewirtschaftung messstellennetz wasseruntersuchung oberflachengewasser quelle wasserfall wasser biomonitoring okosystem fels wassergute wasserressourcen gebrauchswasser wasseruberwachung gewassersohle wasserentnahme gewasser zoneneinteilung energie versickerung artenvielfalt binnengewasser umwelt grundwasser wasserkraft wasserorganismen

label: geocat.ch permalink

state: active

type: dataset

fr: Service de consultation (WMS)

de: Darstellungsdienst (WMS)

format: WMS

fr: Le service représente les données de base du canton de Berne selon la géocatégorie I conforme à eCH-0166. Il comprend les géoproduits suivantes: * Gisements d'eau souterraine en roches meubles * Qualité des cours d'eau * Zones d'infiltration * Prélèvements d’eau dans les eaux de surface * Habitat des sources * Bases de la planification des revitalisations * Planification stratégique des revitalisations * Stratégie d'utilisation de l'eau

de: Der Dienst stellt Geobasisdatensätze des Kantons Bern der Geokategorie I gemäss eCH-0166 dar. Er enthält die folgenden Geoprodukte: * Grundwasservorkommen in Lockergestein * Qualität der Oberflächengewässer * Versickerungszonen * Wasserentnahmen aus Oberflächengewässern * Lebensraum Quellen * Revitalisierungsplanung Grundlagen * Strategische Revitalisierungsplanung * Wassernutzungsstrategie

format: SERVICE

fr: Office de l'information géographique du canton de Berne

de: Amt für Geoinformation des Kantons Bern

fr: L'Office de la géoinformation est le centre de compétence pour l'information spatiale dans le canton de Berne. Les géodonnées cantonales peuvent être utilisées gratuitement, sous réserve des conditions d'utilisation. Le Géoportail du canton de Berne est le point d'entrée central pour les cartes interactives, les géodonnées et les géoservices de l'administration cantonale.

de: Das Amt für Geoinformation ist das Kompetenzzentrum für räumliche Informationen im Kanton Bern. Die kantonalen Geodaten sind unter Einhaltung der Nutzungsbedingungen kostenlos nutzbar. Das Geoportal des Kantons Bern ist der zentrale Einstiegspunkt für interaktive Karten, Geodaten und Geodienste der kantonalen Verwaltung.

political_level: canton

capacity: public

type: organization

approval_status: approved

value: Bern-Kt - Geocat Harvester

fr: Hydrographie 03 (WMS)


gefahrenanalyse-der-gemeinden

soci

en: Population and society

it: Popolazione e società

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

title_for_slug: gefahrenanalyse-der-gemeinden

fr: etude-de-danger evaluation-du-risque

de: gefahrenanalyse risikobewertung

format: WFS

fr: Les données renseignent sur les dangers spécifiques à chaque commune. Elles constituent le fondement de la préparation des organes communaux de protection de la population en matière de catastrophes ou de situations d’urgence.

de: Die Daten geben Auskunft über die für jede Gemeinde spezifische Gefahrensituation. Sie bilden die Basis für die risikobasierte Vorbereitung der kommunalen Organe des Bevölkerungsschutzes im Hinblick auf Katastrophen und Notlagen.

name: Amt für Bevölkerungsschutz, Sport und Militär


fr: autorite-regionale chomage caisse-de-chomage marche-du-travail travail

de: regionalbehorde arbeitslosigkeit arbeitslosenkasse arbeitsmarkt arbeit

format: ZIP

fr: Les offices régionaux de placement ORP soutiennent une réintégration rapide et durable des demandeures d’emploi sur le marché du travail. Les ORP soutiennent les employeurs et les services de placement privés afin de repourvoir les postes vacants. Les offices de paiement de la caisse de chômage du canton de Berne vérifient le droit à l’indemnité de chômage, se chargent du calcul de celle-ci et de son versement.

de: Die Regionalen Arbeitsvermittlungszentren RAV unterstützen die Wiedereingliederung von stellensuchenden Personen in den Arbeitsmarkt. Sie unterstützen Arbeitgeber und private Stellenvermittler bei der Besetzung von offenen Stellen. Die Zahlstellen der Arbeitslosenkasse Kanton Bern prüfen die Anspruchsberechtigung, berechnen die Arbeitslosenentschädigung und zahlen den Versicherten die Entschädigung aus.

spatial: Kanton Bern

fr: Offices régionaux de placement (ORP) et offices de paiement de la caisse de chômage

de: Regionale Arbeitsvermittlungszentren (RAV) und Zahlstellen der Arbeitslosenkasse


abfallkubel-geodienst-wfs

title_for_slug: abfallkubel-geodienst-wfs

de: WFS GetCapabilities Abfallkübel

de: Abfallkübel mit Standort und zusätzlichen Informationen.

name: Geoinformationszentrum (GIS) Stadt Luzern

stadt-luzern

de: Stadt Luzern

de:
Die Stadt Luzern veröffentlicht hier schrittweise OGD-Datensätze der städtischen Dienstabteilungen. Mehr über «Open Government Data» bei der Stadt Luzern ist über den Link <www.ogd.stadtluzern.ch> zu erfahren.

Die Geometadaten zu den einzelnen OGD-Daten sind unter "Zusätzliche Informationen" als Link aufgeführt.
Zu beachten sind weitere Bestimmungen zum Datenschutz und Nutzungsbestimmungen gemäss OGD-Internetauftritt der Stadt Luzern.

political_level: commune

value: Stadt Luzern - Geocat Harvester

de: Abfallkübel (WFS)


regi

de: Regionen und Städte

envi

de: Umwelt

fr: etablissement-humain concentration-de-peuplement lac peche-a-la-ligne zone-de-developpement zone-constructible paysage planification-et-developpement-urbain zone-construite planification-de-lespace-physique commune trafic planification-regionale eaux-geographie promotion-du-commerce-et-de-lindustrie amenagement-du-territoire eaux-interieures transport-maritime planification

de: siedlung siedlungsverdichtung see angeln entwicklungsgebiet bauland landschaft stadtplanung-und--entwicklung baugebiet raumplanung gemeinde verkehr regionalplanung gewasser wirtschaftsforderung flachennutzungsplanung binnengewasser seeverkehr planung

fr: Service de téléchargement (WFS)

de: Downloaddienst (WFS)

fr: Le service représente les données de base du canton de Berne selon la géocatégorie E conforme à eCH-0166. Il comprend les géoproduits suivantes: * Thèmes régionaux relatifs à l'urbanisation et au paysage (faisant partie des CRTU) * Pôles de développement * Plan sectoriel de la navigation de plaisance * Projet cantonal de développement paysager (PCDP) * Plan d'affectation cantonal - Plans de quartier * Espaces réservés aux eaux approuvés * Urbanisation interne * Système de gestion des zones d'activités * Territoires à habitat dispersé

de: Der Dienst stellt Geobasisdatensätze des Kantons Bern der Geokategorie E gemäss eCH-0166 dar. Er enthält die folgenden Geoprodukte: * Regionale Siedlungs- und Landschaftsthemen (Teile der RGSK) * Entwicklungsschwerpunkte * Sachplan Seeverkehr * Kantonales Landschaftsentwicklungskonzept (KLEK) * Kantonale Nutzungsplanung - Überbauungsordnungen * Genehmigte Gewässerräume * Siedlungsentwicklung nach innen * Arbeitszonenbewirtschaftung * Streusiedlungsgebiete

fr: Développement territorial et cadastre foncier 02 (WFS)

de: Raumplanung und Grundstückskataster 02 (WFS)


kantonaler-richtplan-elemente-wildtiere

regi

fr: Régions et villes

fr: Environnement

title_for_slug: kantonaler-richtplan-elemente-wildtiere

de: wildtier raumplanung

fr: Lien vers le téléchargement de données (Zip)

de: Link zum Daten-Download (Zip)

fr: Les corridors migratoires peuvent être menacés, voire d'ores et déjà interrompus par l'extension du milieu bâti et la densification du réseau de transport. Les emplacements où de tels problèmes se posent sont désignés en tant qu'obstacles aux déplacements de la faune dans le projet cantonal d'aménagement du paysage (2013).

de: Wildwechselkorridore können durch die Ausbreitung von Siedlungen und Verkehrswegen gefährdet oder bereits unterbrochen sein. Solche Gebiete werden im kantonalen Landschaftsentwicklungskonzept (2013) als Verbreitungshindernisse für Wildtiere gekennzeichnet.

spatial: Kanton Bern (reduziert)

de: Amt für Geoinformation des Kantons Bern

de: Das Amt für Geoinformation ist das Kompetenzzentrum für räumliche Informationen im Kanton Bern. Die kantonalen Geodaten sind unter Einhaltung der Nutzungsbedingungen kostenlos nutzbar. Das Geoportal des Kantons Bern ist der zentrale Einstiegspunkt für interaktive Karten, Geodaten und Geodienste der kantonalen Verwaltung.

fr: Plan directeur cantonal, éléments de la faune

de: Kantonaler Richtplan, Elemente Wildtiere


abfallkubel-geodienst-wms

title_for_slug: abfallkubel-geodienst-wms

de: WMS GetCapabilities Abfallkübel

de: Abfallkübel (WMS)


abfallkubel-standort-und-information

title_for_slug: abfallkubel-standort-und-information

media_type: application/json

de: Abfallkübel als json-Datei

format: JSON

de: Abfallkübel als Geopackage (.gpkg)

format: GPKG

de: Abfallkübel als dxf-Datei

format: DXF

de: Abfallkübel mit Standort und zusätzlichen Informationen. Nebst der Lage der Abfallkübel sind Attribute wie Baujahr und Leerungsperiodizität erfasst.

spatial: Stadt Luzern

stadt-luzern

de: Stadt Luzern

de: Abfallkübel - Standort und Information


regi

de: Regionen und Städte

envi

de: Umwelt

fr: bassin-versant precipitation-atmospherique eaux-geographie eaux-souterraines

de: gewassereinzugsgebiet niederschlag gewasser grundwasser

fr: Le géoproduit 'Réseau cantonal de mesure hydrométrique' comprend les point de mesure cantonaux des eaux de surface, des eaux souterraines, des jauges de dotation pour les prélèvements d'eau et des mesures hydrométriques ponctuelles. Des points de mesure météorologique sont également prévus.

de: Das Geoprodukt 'kantonales hydrometrisches Messstellennetz' umfasst die kantonalen Messstellen der Oberflächengewässer, des Grundwassers, der Pegellatten für Dotierwassermengen bei Wasserentnahmen, sowie punktuell durchgeführte hydrometrische Messungen. Zusätzlich werden auch die meteorologischen Messstellen bereitgestellt.

spatial: Schweiz

fr: Office de l'information géographique du canton de Berne

fr: L'Office de la géoinformation est le centre de compétence pour l'information spatiale dans le canton de Berne. Les géodonnées cantonales peuvent être utilisées gratuitement, sous réserve des conditions d'utilisation. Le Géoportail du canton de Berne est le point d'entrée central pour les cartes interactives, les géodonnées et les géoservices de l'administration cantonale.

fr: Réseau cantonal de mesure hydrométrique


kommunale-richtplane-energie

title_for_slug: kommunale-richtplane-energie

de: energiepolitik energietrager

de: Link zum Daten-Download (Zip)

fr: Le plan directeur de l'énergie permet de fixer à long terme des objectifs de politique énergétique en rapport avec l'organisation du territoire. Il est contraignant pour les autorités et leur fournit des éléments pour définir les prescriptions bligatoires à l'intention des propriétaires fonciers, lesquelles figureront dans le plan d'affectation communal.

de: Der Richtplan Energie ist geeignet, energiepolitische Ziele mit räumlichem Bezug langfristig festzuschreiben. Er ist für die Behörden verbindlich und liefert Grundlagen für grundeigentümerverbindliche Festlegungen in der kommunalen Nutzungsplanung.

fr: Plans directeurs communaux de l'énergie

de: Kommunale Richtpläne Energie


gebaudeadressen-ur

title_for_slug: gebaudeadressen-ur

label: Web GIS Client des Kanton Uri. Die Daten können direkt via dem Portal in den unterschiedlichsten Datenformaten heruntergeladen werden.

fr: WMS-Dienst des Kanton Uri

de: WMS-Dienst des Kanton Uri

en: WMS-Dienst des Kanton Uri

it: WMS-Dienst des Kanton Uri

fr: WFS-Dienst des Kanton Uri

de: WFS-Dienst des Kanton Uri

en: WFS-Dienst des Kanton Uri

it: WFS-Dienst des Kanton Uri

fr: Die Gebäudeadresse setzt sich zusammen aus einer Ortschaft mit Postleitzahl, einem Lokalisationsnamen (in der Regel Strassennamen) und einer Hausnummer. Zusätzlich werden die Strassenstücke und benannten Gebiete der amtlichen Vermessung dargestellt.

spatial: Canton of Uri (UR)

geoinformation-kanton-uri

de: Lisag AG, Geoinformation Kanton Uri

de: Die Lisag AG bewirtschaftet das geografische Informationssystem des Kantons Uri (GIS Uri), ist die verantwortliche Stelle für den ÖREB-Kataster Uri und zudem zuständig für die Durchführung der amtlichen Vermessung auf Urner Kantonsgebiet.

value: Uri-Kt - Geocat Harvester

fr: Gebäudeadressen (UR)

de: Gebäudeadressen (UR)

en: Gebäudeadressen (UR)

it: Gebäudeadressen (UR)


fr: frontiere-infranationale lac frontiere-nationale limite-administrative commune bordure

de: innerstaatliche-grenze see staatsgrenze verwaltungsgrenze gemeinde grenze

fr: Service de téléchargement (WFS)

de: Downloaddienst (WFS)

fr: Le service représente les données de base du canton de Berne selon la géocatégorie D conforme à eCH-0166. Il comprend les géoproduits suivantes: * Limites politiques généralisées

de: Der Dienst stellt Geobasisdatensätze des Kantons Bern der Geokategorie D gemäss eCH-0166 dar. Er enthält die folgenden Geoprodukte: * Politische Grenzen generalisiert

de: Das Amt für Geoinformation ist das Kompetenzzentrum für räumliche Informationen im Kanton Bern. Die kantonalen Geodaten sind unter Einhaltung der Nutzungsbedingungen kostenlos nutzbar. Das Geoportal des Kantons Bern ist der zentrale Einstiegspunkt für interaktive Karten, Geodaten und Geodienste der kantonalen Verwaltung.

fr: Limites politiques et administratives 03 (WFS)

de: Politische und administrative Grenzen 03 (WFS)


liegenschaften-ur

regi

fr: Régions et villes

de: Regionen und Städte

envi

fr: Environnement

de: Umwelt

title_for_slug: liegenschaften-ur

fr: terrain geodonnees-de-base

de: grundstuck geobasisdaten

en: site official-geodata

it: fondo geodati-di-base

fr: Die Informationsebene Liegenschaften enthält die Grundstücke gemäss Art. 655 Abs. 2 ZGB: rechtsgültige und projektierte Liegenschaften (Parzellen), selbständige und dauernde Rechte (z.B. Baurecht). Zudem sind ab dem Massstab 1:1'000 auch die Grenzpunkte und Hoheitsgrenzpunkte sichtbar.

fr: Liegenschaften (UR)

de: Liegenschaften (UR)

en: Liegenschaften (UR)

it: Liegenschaften (UR)


soci

fr: Population et société

de: Bevölkerung und Gesellschaft

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

fr: anglicane alevisme eglise synagogue travail-social-en-milieu-scolaire lieu-de-culte reformee-evangelique protection-des-sites temple taxation religion vajrayana revenu tradition-religieuse eglise-nationale catholique-romaine ecole-a-journee sikhisme christianisme archeologie lutherienne bouddhisme islam hindouisme theravada mahayana chiite bahaisme eglise-de-la-migration sunnite inventaire-environnement diversite-des-religions espace-protege mosquee eglise-libre mesure-de-protection monument-historique politique-de-preservation-des-paysages edifices-religieux orthodoxe judaisme catholique-chretienne

de: anglikanisch alevitentum kirche synagoge schulsozialarbeit kultstatte evangelisch-reformiert flachenschutz tempel besteuerung religion vajrayana einkommen religiose-tradition landeskirche romisch-katholisch tagesschule sikh christentum archaologie lutherisch buddhismus islam hinduismus theravada mahayana schiitisch bahai migrationskirche sunnitisch inventar religionsvielfalt schutzgebiet moschee freikirche schutzmassnahme baudenkmal landschaftspflege religiose-gebaude orthodox judentum christkatholisch

fr: Le service représente les données de base du canton de Berne selon la géocatégorie M conforme à eCH-0166. Il comprend les géoproduits suivantes: * Sites d'écoles publiques de la scolarité obligatoire * Revenu moyen et fortune nets par commune * Quotités d'impôt par commune * Inventaire archéologique * Inventaire des sites construits à protéger * Carte des religions * Stade déménagement électronique (eDéménagement)

de: Der Dienst stellt Geobasisdatensätze des Kantons Bern der Geokategorie M gemäss eCH-0166 dar. Er enthält die folgenden Geoprodukte: * Standorte öffentlicher Volksschulen * Durchschnittliches Reineinkommen und Reinvermögen pro Gemeinde * Steueranlagen pro Gemeinde * Archäologisches Inventar * Inventar der schützenswerten Ortsbilder * Religionslandkarte * Stand elektronischer Umzug (eUmzug)

fr: Office de l'information géographique du canton de Berne

fr: L'Office de la géoinformation est le centre de compétence pour l'information spatiale dans le canton de Berne. Les géodonnées cantonales peuvent être utilisées gratuitement, sous réserve des conditions d'utilisation. Le Géoportail du canton de Berne est le point d'entrée central pour les cartes interactives, les géodonnées et les géoservices de l'administration cantonale.

de: Bevölkerung, Gesellschaft und Kultur 01 (WFS)


planeinteilungen-ur

title_for_slug: planeinteilungen-ur

fr: repartition-du-plan geodonnees-de-base

de: planeinteilung geobasisdaten

en: plan-division official-geodata

it: ripartizione-del-piano geodati-di-base

fr: WMS-Dienst des Kanton Uri

de: WMS-Dienst des Kanton Uri

fr: WFS-Dienst des Kanton Uri

de: WFS-Dienst des Kanton Uri

fr: Die Geometrien und Nummern der Planeinteilung des Planes für das Grundbuch.

geoinformation-kanton-uri

de: Lisag AG, Geoinformation Kanton Uri

fr: Planeinteilungen (UR)

de: Planeinteilungen (UR)

en: Planeinteilungen (UR)

it: Planeinteilungen (UR)


administrative-einteilung-ur

title_for_slug: administrative-einteilung-ur

fr: Die Toleranzstufen sind ein Teil des Datenmodells DM01 und geben an, wie genau die Objekte der AV aufgenommen sein müssen. In den entsprechenden Verordnungen ist definiert, welche Standardabweichungen für die einzelnen Aufnahmepunkte sicherzustellen sind.

geoinformation-kanton-uri

de: Die Lisag AG bewirtschaftet das geografische Informationssystem des Kantons Uri (GIS Uri), ist die verantwortliche Stelle für den ÖREB-Kataster Uri und zudem zuständig für die Durchführung der amtlichen Vermessung auf Urner Kantonsgebiet.

fr: Administrative Einteilung (UR)

de: Administrative Einteilung (UR)

en: Administrative Einteilung (UR)

it: Administrative Einteilung (UR)


hoheitsgrenzen-ur

regi

fr: Régions et villes

envi

fr: Environnement

title_for_slug: hoheitsgrenzen-ur

fr: Da der Kanton Uri keine Bezirke hat, bestehen die Hoheitsgrenzen ausschliesslich aus den Gemeindegrenzen.

fr: Hoheitsgrenzen (UR)

de: Hoheitsgrenzen (UR)

en: Hoheitsgrenzen (UR)

it: Hoheitsgrenzen (UR)


parzellennummern

regi

de: Regionen und Städte

title_for_slug: parzellennummern

de: grundbuch eigentumsordnung kataster

fr: Lien vers le téléchargement de données (Zip)

de: Link zum Daten-Download (Zip)

fr: Le produit Numéros de parcelles contient les numéros géoréférencés de parcelles (bien-fonds ainsi que les droits distincts et permanents) du canton de Berne. Par le fait que les numéros de parcelles soient connues par leurs coordonnées (y et x), DIPANU permet de rechercher des parcelles dans le canton de Berne.

de: Das Produkt Parzellennummern beinhaltet die georeferenzierten Nummern von Grundstücken (Liegenschaften und Selbstständige, dauernde Rechte) im Kanton Bern. Dadurch, dass die Grundstücknummern mit ihren Koordinaten (y und x) abgelegt sind, dient DIPANU als Suchinstrument von Grundstücken innerhalb des Kantons Bern.

de: Amt für Geoinformation des Kantons Bern

de: Das Amt für Geoinformation ist das Kompetenzzentrum für räumliche Informationen im Kanton Bern. Die kantonalen Geodaten sind unter Einhaltung der Nutzungsbedingungen kostenlos nutzbar. Das Geoportal des Kantons Bern ist der zentrale Einstiegspunkt für interaktive Karten, Geodaten und Geodienste der kantonalen Verwaltung.


nomenklatur-ur

envi

de: Umwelt

title_for_slug: nomenklatur-ur

fr: Flur-, Orts- und Geländenamen (= geografische Namen der amtlichen Vermessung) von geografischen Gebieten, Landschaftsteilen, Flurstücken, topografischen Objekten usw.

fr: Nomenklatur (UR)

de: Nomenklatur (UR)

en: Nomenklatur (UR)

it: Nomenklatur (UR)


de: grundwasserqualitat see angeln sickerwasser gewassereinzugsgebiet quelle laichplatz wasser fisch wasseruberwachung gewassersohle fliessgewasser gewassernamen gewasser zoneneinteilung binnengewasser fluss fischerei hochwasser grundwasser grundwasserschutz gewasserschutz ufer planung

fr: Service de consultation (WMS)

de: Darstellungsdienst (WMS)

fr: Le service représente les données de base du canton de Berne selon la géocatégorie I conforme à eCH-0166. Il comprend les géoproduits suivantes: * Carte de la protection des eaux * Pêche à la ligne * Bases pour l'espace réservé aux eaux * Réseau hydrographique du canton de Berne * Zones de frai piscicole dans les trois grands lacs * Bassins de bilan * Qualité eaux souterraines

de: Der Dienst stellt Geobasisdatensätze des Kantons Bern der Geokategorie I gemäss eCH-0166 dar. Er enthält die folgenden Geoprodukte: * Gewässerschutzkarte * Angelfischerei * Gewässerraum Grundlagen * Gewässernetz des Kantons Bern * Fischlaichgebiete der drei grossen Seen * Bilanzgebiete * Qualität Grundwasser

fr: Office de l'information géographique du canton de Berne


fr: structure-batie centrale-electrique bassin-versant poisson precipitation-atmospherique eau-courante eaux-geographie morphologie eaux-interieures eaux-souterraines nettoyage conservation-de-leau

de: bauwerk kraftwerk gewassereinzugsgebiet fisch niederschlag fliessgewasser gewasser morphologie binnengewasser grundwasser sanierung gewasserschutz

fr: Le service représente les données de base du canton de Berne selon la géocatégorie I conforme à eCH-0166. Il comprend les géoproduits suivantes: * Assainissement du régime de charriage * Assainissement de la migration piscicole * Écomorphologie des rives lacustres * Réseau cantonal de mesure hydrométrique * Assainissement des éclusées * Écomorphologie des cours d'eau

de: Der Dienst stellt Geobasisdatensätze des Kantons Bern der Geokategorie I gemäss eCH-0166 dar. Er enthält die folgenden Geoprodukte: * Sanierung Geschiebehaushalt * Sanierung Fischwanderung * Ökomorphologie der Seeufer * Kantonales hydrometrisches Messstellennetz * Sanierung Schwall-Sunk * Ökomorphologie der Fliessgewässer

fr: L'Office de la géoinformation est le centre de compétence pour l'information spatiale dans le canton de Berne. Les géodonnées cantonales peuvent être utilisées gratuitement, sous réserve des conditions d'utilisation. Le Géoportail du canton de Berne est le point d'entrée central pour les cartes interactives, les géodonnées et les géoservices de l'administration cantonale.


fr: plan-de-situation geodonnees-de-base

de: situationsplan geobasisdaten

en: situation-plan official-geodata

it: piano-di-situazione geodati-di-base

fr: WMS-Dienst des Kanton Uri

de: WMS-Dienst des Kanton Uri

fr: WFS-Dienst des Kanton Uri

de: WFS-Dienst des Kanton Uri

fr: Diverse Ebenen aus der Amtlichen Vermessung bilden den bekannten Grundbuchplan. Den Katasterplan A4/A3 als PDF können sie ebenfalls hier direkt beziehen.

geoinformation-kanton-uri

de: Lisag AG, Geoinformation Kanton Uri

fr: Grundbuchplan Darstellung schwarz-weiss (UR)


regi

fr: Régions et villes

de: Regionen und Städte

envi

fr: Environnement

fr: couverture-du-sol geodonnees-de-base

de: bodenbedeckung geobasisdaten

en: land-cover official-geodata

it: copertura-del-suolo geodati-di-base

url: https://geo.ur.ch/?layers=Bodenbedeckung Darstellung schwarz weiss

fr: Die Informationsebene Bodenbedeckung ist eine generalisierte und kartografisch bearbeitete Darstellung realer Objekte mit flächiger Ausdehnung (Gebäude, Strassen, Gewässer, Wald...).

de: Die Lisag AG bewirtschaftet das geografische Informationssystem des Kantons Uri (GIS Uri), ist die verantwortliche Stelle für den ÖREB-Kataster Uri und zudem zuständig für die Durchführung der amtlichen Vermessung auf Urner Kantonsgebiet.

fr: Bodenbedeckung Darstellung schwarz weiss (UR)


quellen-und-sondierungen

title_for_slug: quellen-und-sondierungen

fr: Dieser Layer liefert Informationen über die Lage und den Status der öffentlichen und privaten Quellen, sowie die Sondierungen im Kanton Uri. Dies dient als Planungsgrundlage u.a. für die Wasserversorgung, Stellungnahmen, etc.

fr: Quellen und Sondierungen

de: Quellen und Sondierungen

en: Quellen und Sondierungen

it: Quellen und Sondierungen


gewasserschutzbereiche-ur

regi

en: Regions and cities

it: Regioni e città

title_for_slug: gewasserschutzbereiche-ur

fr: Die Kantone bezeichnen zum Schutz des Grundwassers und als Grundlage für die zu treffenden Schutzmassnahmen die besonders gefährdeten und die übrigen Bereiche. Die besonders gefährdeten Bereiche umfassen den Gewässerschutzbereich Au, den Gewässerschutzbereich Ao, den Zuströmbereich Zu und den Zuströmbereich Zo. Die Gewässerschutzbereiche Au und Zu dienen dem planerischen Schutz der unterirdischen Gewässer. Die Bereiche Ao und Zo bezwecken den Schutz von Oberflächengewässern. Die übrigen Bereiche (üB) umfassen den Rest des Kantons.

fr: Gewässerschutzbereiche (UR)

de: Gewässerschutzbereiche (UR)

en: Gewässerschutzbereiche (UR)

it: Gewässerschutzbereiche (UR)


postleitzahl-ur

envi

en: Environment

it: Ambiente

title_for_slug: postleitzahl-ur

fr: Postleitzahl aus TOPIC «PLZOrtschaft» der amtlichen Vermessung.

fr: Postleitzahl (UR)

de: Postleitzahl (UR)

en: Postleitzahl (UR)

it: Postleitzahl (UR)


egid-und-gebaudenummer

envi

de: Umwelt

title_for_slug: egid-und-gebaudenummer

en: WMS-Dienst des Kanton Uri

it: WMS-Dienst des Kanton Uri

fr: EGID und Gebäudenummer. Jedes Gebäude hat eine vortlaufende Nummer die gemeindeweise eindeutig ist.

fr: EGID und Gebäudenummer

de: EGID und Gebäudenummer

en: EGID und Gebäudenummer

it: EGID und Gebäudenummer


grundbuchplan-ur

title_for_slug: grundbuchplan-ur

fr: plan-de-situation geodonnees-de-base

fr: WMS-Dienst des Kanton Uri

en: WFS-Dienst des Kanton Uri

it: WFS-Dienst des Kanton Uri

fr: Diverse Ebenen aus der Amtlichen Vermessung bilden den bekannten Grundbuchplan. Der Katasterplan A4/A3 als PDF können sie ebenfalls hier direkt beziehen.

fr: Grundbuchplan (UR)

de: Grundbuchplan (UR)

en: Grundbuchplan (UR)

it: Grundbuchplan (UR)


bodenbedeckung-ur

regi

fr: Régions et villes

title_for_slug: bodenbedeckung-ur

fr: WFS-Dienst des Kanton Uri

de: Die Informationsebene Bodenbedeckung ist eine generalisierte und kartografisch bearbeitete Darstellung realer Objekte mit flächiger Ausdehnung (Gebäude, Strassen, Gewässer, Wald...).

fr: Bodenbedeckung (UR)

de: Bodenbedeckung (UR)

en: Bodenbedeckung (UR)

it: Bodenbedeckung (UR)


fixpunkte-ur

envi

fr: Environnement

title_for_slug: fixpunkte-ur

fr: Die Fixpunkte bilden die Grundlage aller Daten mit Raumbezug. Darunter fallen beispielsweise die Daten der amtlichen Vermessung, die Landeskartenwerke, Leitungskataster, Daten in geographischen Informationssystemen, Zonenpläne etc. Es werden generell zwei Punktarten unterschieden: die Lagefixpunkte (LFP) und die Höhenfixpunkte (HFP).

fr: Fixpunkte (UR)

de: Fixpunkte (UR)

en: Fixpunkte (UR)

it: Fixpunkte (UR)


einzelobjekte-ur

title_for_slug: einzelobjekte-ur

fr: Die Informationsebene Einzelobjekte umfasst Objekte, die Merkmale der Bodenbedeckung enthalten, welche aufgrund ihrer Eigenschaft oder Ausdehnung aber keine oder unwesentliche flächenmässige Bedeutung haben.

fr: Einzelobjekte (UR)

de: Einzelobjekte (UR)

en: Einzelobjekte (UR)

it: Einzelobjekte (UR)


gestaltungsplane-perimeter

title_for_slug: gestaltungsplane-perimeter

de: eigentumsbeschrankungoreb nutzungsplanung raumplanung sondernutzungsplanung

protocol: https

de: Datenshop

de: Produktansicht Geodatenshop

de: Perimeter der Gestaltungspläne

spatial: Kanton Luzern

fr: Géoinformation du canton de Lucerne

de: Geoinformation Kanton Luzern

en: Geoinformation Canton of Lucerne

it: Geoinformazione del Cantone di Lucerna

fr: La géoinformation du canton de Lucerne est responsable de la collecte, du traitement et de la gestion des données à référence spatiale. Elle dirige, coordonne et surveille les travaux de la géoinformation et de la mensuration officielle.

en: Geoinformation of the Canton of Lucerne is responsible for the collection, processing and management of spatial data. It manages, coordinates and monitors the work of geoinformation and of the cadastral surveying.

de: Die Geoinformation des Kantons Luzern ist für die Erhebung, Verarbeitung und Verwaltung von raumbezogenen Daten zuständig. Sie leitet, koordiniert und überwacht die Arbeiten der Geoinformation und der amtlichen Vermessung.

it: La Geoinformation del Cantone di Lucerna è responsabile della raccolta, dell'elaborazione e della gestione dei dati territoriali. Gestisce, coordina e monitora il lavoro della geoinformazione e della misurazione ufficiale.

value: LU-Kt - Geocat Harvester

de: Gestaltungspläne: Perimeter


amtliche-vermessung-vereinfacht

regi

de: Regionen und Städte

title_for_slug: amtliche-vermessung-vereinfacht

fr: cadastre planification

de: kataster planung

fr: Lien vers le téléchargement de données (Zip)

fr: Le géoproduit mensuration officielle simplifiée (MOPUBE) contient les données relatives à la structure de propriété et à l'utilisation du sol dans le canton de Berne. Ces données sont les plus précises disponibles actuellement. Elles se prêtent bien à un fond de plan pour la représentation d'informations thématiques. Le géoproduit mensuration officielle simplifiée est mis à jour chaque semaine ; il n'a pas de portée légale. Il constitue un sous-ensemble des données complètes de la mensuration officielle (MO). Il contient les données géométriques et les attributs des objets décrivant la propriété et l'utilisation du sol. Ces données sont à la base de la plupart des applications SIG. Elles ont été élaguées des informations plus détaillées n'intéressant principalement que les spécialistes de la mensuration cadastrale. Ce jeu de données comprend des extraits des couches d'information suivantes: points fixes, couverture du sol, objets divers, nomenclature, biens-fonds, divisions administratives et techniques de la mensuration officielle. La structure du geoproduit correspond à celle du modèle de données de la Confédération. Il a été toutefois complété avec des exigences cantonales.

de: Das Geoprodukt Amtliche Vermessung vereinfacht (MOPUBE) enthält die genauesten, verfügbaren Daten über Grund und Boden des Kantons Bern. Es eignet sich optimal  insbesondere die Bodenbedeckung und Liegenschaften  als Kartenhintergrund für die Darstellung thematischer Informationen. Das Geoprodukt Amtliche Vermessung vereinfacht wird wöchentlich aktualisiert; es besitzt keine Rechtswirkung. Es enthält eine Teilmenge der Daten der Amtlichen Vermessung (AV), namentlich diejenigen geometrischen und attributiven Daten zu Grund und Boden, die von den meisten GIS-Anwendern benötigt werden. Weitergehende Informationen, die vorwiegend Vermessungsspezialisten interessieren, werden weggelassen. Der Geodatensatz umfasst Auszüge aus den Informationsebenen Fixpunkte, Bodenbedeckung, Einzelobjekte, Nomenklatur, Liegenschaften, administrative und technische Einteilungen der Amtlichen Vermessung. Das Geoprodukt entspricht von der Struktur her dem Datenmodell «MOpublic» des Bundes. Es ist jedoch mit einigen kantonalen Anforderungen ergänzt worden.

fr: Office de l'information géographique du canton de Berne

fr: L'Office de la géoinformation est le centre de compétence pour l'information spatiale dans le canton de Berne. Les géodonnées cantonales peuvent être utilisées gratuitement, sous réserve des conditions d'utilisation. Le Géoportail du canton de Berne est le point d'entrée central pour les cartes interactives, les géodonnées et les géoservices de l'administration cantonale.

de: Das Amt für Geoinformation ist das Kompetenzzentrum für räumliche Informationen im Kanton Bern. Die kantonalen Geodaten sind unter Einhaltung der Nutzungsbedingungen kostenlos nutzbar. Das Geoportal des Kantons Bern ist der zentrale Einstiegspunkt für interaktive Karten, Geodaten und Geodienste der kantonalen Verwaltung.


soci

fr: Population et société

de: Bevölkerung und Gesellschaft

en: Population and society

it: Popolazione e società

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

de: eigentumsbeschrankungoreb gebaude-und-anlagen kulturdenkmal kulturguterschutz nutzungsplanung ortsbildschutz zonenplan

de: Zeigt im Kantonalen Denkmalverzeichnis (KDV) und Bauinventar eingetragene Bauten und Schutzobjekte.

name: Denkmalpflege und Archäologie des Kantons Luzern, Denkmalpflege

de: Kantonales Denkmalverzeichnis und Bauinventar


nutzungsplanung-planungszonen

regi

fr: Régions et villes

envi

de: Umwelt

title_for_slug: nutzungsplanung-planungszonen

de: bewilligungen eigentumsbeschrankungoreb nutzungsplanung raumplanung zonenplan

de: Die Planungszone bezeichnet ein Gebiet, in dem Nutzungspläne erlassen oder geändert werden müssen.

de: Nutzungsplanung: Planungszonen


waldflachen

agri

fr: Agriculture, pêche, sylviculture et alimentation

de: Landwirtschaft, Fischerei, Forstwirtschaft und Nahrungsmittel

en: Agriculture, fisheries, forestry and food

it: Agricoltura, pesca, silvicoltura e prodotti alimentari

title_for_slug: waldflachen

de: forstwirtschaft nutzungsplanung vegetation wald

de: Datenshop

de: Produktansicht Geodatenshop

de: Wald nach Waldrecht, dieser umfasst unter anderem auch Waldstrassen, Gewässer und Gebäude innerhalb des Waldes.

name: Dienststelle Landwirtschaft und Wald (lawa)

de: Waldflächen


zonenplane

regi

de: Regionen und Städte

title_for_slug: zonenplane

de: baulinie eigentumsbeschrankungoreb grundeigentum nutzungsplanung raumplanung zonenplan

de: Zonenpläne regeln die zulässigen Nutzungen im Gebiet einer Gemeinde.

de: Geoinformation Kanton Luzern

de: Die Geoinformation des Kantons Luzern ist für die Erhebung, Verarbeitung und Verwaltung von raumbezogenen Daten zuständig. Sie leitet, koordiniert und überwacht die Arbeiten der Geoinformation und der amtlichen Vermessung.

de: Zonenpläne


maintainer: Staatsarchiv des Kantons Zürich

de: Erlasse der Zürcher Gesetzessammlung ab 1803

mimetype: application/zip

de: Sämtliche Erlasse der Zürcher Gesetzessammlung von 1803 bis 1998. Umgesetzt als XML Dateien nach Vorgaben der TEI. Die Daten stehen unter einer Creative Commons CC-BY-SA 4.0 Lizenz zur Verfügung.

regierungsrat

display_name: regierungsrat

soci

de: Bevölkerung und Gesellschaft

educ

de: Bildung, Kultur und Sport

ener

fr: Énergie

de: Energie

en: Energy

it: Energia

just

fr: Justice, système juridique et sécurité publique

de: Justiz, Rechtssystem und öffentliche Sicherheit

en: Justice, legal system and public safety

it: Giustizia, sistema giuridico e sicurezza pubblica

gove

fr: Gouvernement et secteur public

de: Regierung und öffentlicher Sektor

en: Government and public sector

it: Governo e settore pubblico

tran

fr: Transports

de: Verkehr

en: Transport

it: Trasporti

econ

fr: Économie et finances

de: Wirtschaft und Finanzen

en: Economy and finance

it: Economia e finanze

staatsarchiv-kanton-zuerich

de: Staatsarchiv Kanton Zürich

de: Das Staatsarchiv ist das Archiv des Kantons Zürich und seiner Rechtsvorgänger. Es bewertet, übernimmt, erschliesst und konserviert Unterlagen aus über tausend Jahren Zürcher Geschichte. Durch die Aufbewahrung dieser Unterlagen macht es staatliches Handeln nachvollziehbar und ermöglicht historische Forschung. Das Staatsarchiv gewährt allen Interessierten Einsicht in diejenigen Bestände, die keinen Beschränkungen mehr unterliegen. Der grösste Teil der Findmittel zu den Archivbeständen kann online abgefragt werden.

key: guid

key: uri

value: ZH-Kt Staatsarchiv - DCAT Harvester


maintainer: EnviDat Support

en: switzerland environmental--policy ecology wetlands environmental---history historical-carthography

en: Wetlands 1850 - 2010 (shapefiles)

media_type: application/zip

en:
 History of wetlands - GIS-Layers
 Location of wetlands based on signatures in topographic maps
* Basis 1850: original measuring table sheets Dufour created between the years 1834 and 1863.
* Basis 1900/ Basis 1950: The Siegfried maps were updated and published at regular intervals between 1870 and 1949. This long period of time made it possible to reconstruct wetlands for two periods based on the Siegfried Maps: the first edition (hereinafter referred to as "1900") and the last edition ("1950").
* Basis 2010: Map sheets from the National Map from 2006 to 2011 were used for the most recent time period of the reconstruction.
 Location of wetlands due to reconstructions
The reconstruction **must not** be interpreted in the sense of a surface-accurate separation, but shows without claim to location accuracy the approximate extent of the areas that would have corresponded to the mapping criteria for wetlands used in today's topographic maps around 1850, 1900 and 1950. The basics can be found in Stuber & Bürgi 2019, chapter 5.4.

en:
Naturally, large parts of the Swiss Plateau are characterised by wetlands
and meandering rivers. That this is no longer the case today is the result
of centuries of efforts to obtain dry land. But how did this process take
place? What were the relevant actors and what were their motivations? And
what can be said about the ecological consequences of this development?

In a research project on the history of wetlands in Switzerland since 1700,
we conducted (a) a historical analysis of the development of land use in
wetlands and the actors involved, (b) a historical-cartographic
reconstruction of wetland extent since 1850 and (c) an evaluation of
ecological effects of changes in wetlands on various organisms groups.

The series of GIS layers on wetland history stem from the second part of
the project. The area reconstruction is based on digitized and homogenized
signatures from national map series, as they have been available since
about 1850. Details about the digitalization process and the homogenization
procedures applied ("Rekonstruktionen") are included in Stuber & Bürgi
2019.

Book Citation:
 > Stuber M, Bürgi M (2019) Vom «eroberten Land» zum Renaturierungsprojekt. Geschichte der Feuchtgebiete in der Schweiz seit 1700. "Bristol Schriftenreihe", Band 59. Haupt Verlag, Bern, Stuttgart, Wien. 262 Seiten.

ecology

display_name: ecology

environmental---history

display_name: environmental---history

environmental--policy

display_name: environmental--policy

historical-carthography

display_name: historical-carthography

switzerland

display_name: switzerland

wetlands

display_name: wetlands

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

value: Envidat Harvester

en: History of wetlands in Switzerland since 1850


en: orography air-temperature precipitation paleo-climate last-glacial-maximum glaciers

en: Technical documentation

media_type: application/pdf

en: Technical documentation containing file metadata and variable descriptions.

format: PDF

mimetype: application/pdf

en: Data Access via S3

en:
High resolution, downscaled climate model data are used in a wide variety of applications in environmental sciences. Here we present the CHELSA-TraCE21k downscaling algorithm to create global monthly climatologies for temperature and precipitation at 30 arcsec spatial resolution in 100 year time steps for the last 21,000 years. Paleo orography at high spatial resolution and at each timestep is created by combining high resolution information on glacial cover from current and Last Glacial Maximum (LGM) glacier databases with the interpolation of a dynamic ice sheet model (ICE6G) and a coupling to mean annual temperatures from CCSM3-TraCE21k. Based on the reconstructed paleo orography, mean annual temperature and precipitation was downscaled using the CHELSA V1.2 algorithm.

The data is published under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

format: GeoTIFF

air-temperature

display_name: air-temperature

glaciers

display_name: glaciers

last-glacial-maximum

display_name: last-glacial-maximum

orography

display_name: orography

paleo-climate

display_name: paleo-climate

precipitation

display_name: precipitation

en: CHELSA-TraCE21k: Downscaled transient temperature and precipitation data since the last glacial maximum


maintainer: Sebastian Schlögl

en: turbulent-sensible-heat-fluxes snow atmosphere stable-boundary-layer atmospheric-turbulence

en: Turbulence data AA00

en: sensor in 1 m height

en: Turbulence data PM07

en: NWW

en: SEE

en: Turbulence data WFJ11

en: sensor in 25 m height

en: sensor in 0.2 m height

en: Turbulence data WFJ07

en: upper sensor

en: lower sensor

en: Turbulence data GR00

en: sensor in 2 m height

en:
We used five different atmospheric turbulence datasets from four test sites, with these sites showing differences in their topographical characteristics. We chose one typical alpine test site with high topographical complexity (Weissfluhjoch, Davos, Switzerland) and three test sites consisting of one glacier site (Plaine Morte, Crans-Montana, Switzerland) and two polar sites (Greenland and Antarctica) representing a quasi-ideal site with homogeneous surface and quasi infinite fetch in all directions.
The turbulent sensible heat flux was calculated using the eddy-covariance method. Note that the sonic temperature fluctuations have been converted into virtual temperature fluctuations.
Three-dimensional wind velocity and air temperature were processed using a linear detrending (Rannik and Vesala, 1999) and a planar fit approach (Massmann and Lee, 2002) to rotate the coordinate system. Air temperature, relative humidity and air pressure from weather stations were used to calculate air properties, which are required for the data processing. The weather stations are located in the immediate vicinity of the turbulence tower and are affected by the same air masses. Turbulence data were averaged to 30-min intervals, whilst changing to a 15-min time interval marginally affects the heat fluxes at the Weissfluhjoch test site (Mott et al., 2011). Note that we define a negative sensible heat flux as being directed towards the snow surface and a positive sensible heat flux as being directed upwards.
The selected datasets and corresponding test sites are briefly introduced below:

Weissfluhjoch 2007 (WFJ07): A vertical set-up of two three-dimensional ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) was used at the traditional field site Weissfluhjoch (2540 m asl.) to measure three-dimensional wind velocity and air temperature at a frequency of 20 Hz. The sensors were mounted 3 m and 5 m above the ground and provided reliable data for 50 days between 11 February 2007 and 24 April 2007. Further information on the field campaign can be found in Stössel et al. (2010) and Mott et al. (2011).

Weissfluhjoch 2011-13 (WFJ11): Three-dimensional wind velocity and air temperature were recorded at 5 m above the ground at a frequency of 10 Hz with a three-dimensional ultrasonic anemometer (CSAT3). The analysis was conducted for data obtained between February and March in the years 2011-13.

Plaine Morte 2007 (PM07): Two three-dimensional ultrasonic anemometers (CSAT3) were installed on a horizontal boom facing opposite directions (west-north-west vs. east-south-east) at 3.75 m above the ground to measure air temperature and three-dimensional wind velocity at 20 Hz. The data were collected at the almost flat field site on the Plaine Morte glacier (2750 m asl.) near Crans-Montana, Switzerland from February to April 2007. High quality meteorological data were additionally recorded and used to force the model. A detailed description about the set-up at the Plaine Morte glacier can be found in Huwald et al. (2009) and Bou-Zeid et al. (2010).

Greenland 2000 (GR00): High-frequency three-dimensional ultrasonic anemometer measurements (CSAT3) were recorded at 50 Hz at the Summit Camp (72.3 °N, 38.8 °W, 3208 m asl.) located on the northern dome of the Greenland ice sheet. Data were collected at 1 m and 2 m above the snow surface during summer in 2000 and 2001. Additionally, meteorological measurements were obtained for the post processing and used to force the model. More information about the field campaign can be found in Cullen et al. (2007, 2014).

Antarctica 2000 (AA00): A set-up of three vertical three-dimensional ultrasonic anemometers (DA-600, Kaijo Denki) were installed at Mizuho Station (70°42' S, 44°20' E, 2230 m asl.) in Eastern Antarctica at 0.2, 1 and 25 m and recorded turbulence data at a frequency of 100 Hz from October to November 2000. Longwave and shortwave radiation, relative humidity, air and snow surface temperature were additionally measured and used to force the model. More information about the field campaign can be found in Nishimura and Nemoto (2005).

atmosphere

display_name: atmosphere

atmospheric-turbulence

display_name: atmospheric-turbulence

snow

display_name: snow

stable-boundary-layer

display_name: stable-boundary-layer

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

educ

en: Education, culture and sport

en: How do stability corrections perform in the stable boundary layer over snow?


en: population-evolution biological-control dryocosmus-kuriphilus southern-switzerland pest-invasion torymus-sinensis castanea-sativa

media_type: text/csv

en:
Data has been collected from summer 2011 to 2016.

Main reasons for NA values:

-	D. kuriphilus still not arrived in the site.
-	No galls were found during the field sampling.
-	Site has not been sampled in the correspondent year because of time, weather or money constrains.
-    T. sinensis not found in the galls

Variable description:

Year = sampling year.

Coordinate, elevation, slope, aspect = average site characteristics.

ts_arrival = T. sinensis arrival year.

dk_arrival = D. kuriphilus arrival year.

dk_parasitism_by_ts = D. kuriphilus parasitism rate by T. sinensis. Formula: (no. of T. sinensis/ no. of D. kuriphilus chambers) * 100 at gall level.

dk_infestation = Percentage of attacked buds. Formula: no. of attacked buds / no. of total developed buds*100 (as presented in Kotobuki et al. 1985) at shoot level.

ts_per_bud = number of alive T. sinensis individual calculated at bud level.

dk_per_bud = number of alive D. kuriphilus individual calculated at bud level.

dk_pot_per_bud = overall number (dead and alive) D. kuriphilus individual calculated at bud level.

total_gall_nr_per_bud = average gall number per bud.

chamber_per_galls = average D. kuriphilus chamber number per gall.

For details see the submitted publication with the same name

References
Kotobuki, K., Mori, K. and Sato, Y. (1985) ‘2 methods to estimate the tree damage by chestnut gall wasp Dryocosmus-kuriphilus’, Bulletin of the fruit tree research station A (Yatabe), 2(12), pp. 29–36.

format: CSV

mimetype: text/csv

en:
This dataset contains the population evolution of a pest and its biocontrol agent in terms of presence proportion at gall level and absolute number of insects.

The study area extends from the Cuneo region (Piedmont, Italy) to southern Switzerland. In order to provide a complete range of data covering the entire process from the pest arrival to complete biological control by its natural enemy T. sinensis, a space-for-time substitution approach has been adopted so as to create a temporal gradient of the epidemic stages over the whole study area.

The southernmost Swiss sites roughly represent the arrival and establishment of the pest without the presence of the natural enemy, the central ones the early epidemic stage and the epidemic peak, whereas the northern ones the end of the epidemic with the beginning of the biocontrol. The Italian ones represent the beginning of the equilibrium between the two population as well as the situation with stable T. sinensis populations on the long term.

These data are used in the paper entitled: Torymus sinensis local and regional early population dynamics in the Insubrian and Piedmont regions

biological-control

display_name: biological-control

castanea-sativa

display_name: castanea-sativa

dryocosmus-kuriphilus

display_name: dryocosmus-kuriphilus

pest-invasion

display_name: pest-invasion

population-evolution

display_name: population-evolution

southern-switzerland

display_name: southern-switzerland

torymus-sinensis

display_name: torymus-sinensis

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: wind-speed relative-humidity long-term climate-change precipitation meteo swiss-forest-lab par meteorology temperature

en: Site aerial photo (Vordemwald)

en: Site aerial photo from both Vordemwald stations. Source: Google. 2016. Site aerial photo from both Vordemwald stations. Retrieved November 11, 2016, from https://www.google.ch/maps

mimetype: image/jpeg

en: Forest station data (VOB)

en: Data file.

en: Field station data (VOF)

en: Site photo of the field station (VOF)

en: Site photo of the field stationfrom the side.

en: Data plot of the forest station (VOB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site photo of the forest station (VOB)

en: Site photo of the forest station from the side.

en: Data plot of the field station (VOF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Vordemwald in Switzerland where one station is located within a natural mixed forest stand (VOB) with European silver fir (_Abies alba_; 110 yrs) and oak trees (_Quercus sp._; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, VOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Vordemwald is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Vordemwald, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


maintainer: Nander Wever

en: humidity wind-speed wind-direction snow-ice-temperature precipitation-amount snow-depth longwave-radiation shortwave-radiation air-temperature

en: SNOWPACK ini file (old syntax)

en: This ini-file can be used to run SNOWPACK simulations with the WFJ data set, using version 3.4.0 or higher.

en: Version 2

en:
Deprecated version. Release notes:

Bug fix: in v1, incoming radiation components were taken from WFJ_Gipfel station, instead of WFJ Versuchsfeld.

en: SNOWPACK ini file (new syntax)

en: This ini-file can be used to run SNOWPACK simulations with the WFJ data set, using the new MeteoIO Filter, Generator and Interpolation syntax.

en: Version 4

en:
Deprecated version. Release notes:

Update: dataset extended to 2016-09-02T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: Version 1

en:
Deprecated version. Release notes:

First release of dataset.

en: All versions

en: Version 5

en:
Deprecated version. Release notes:

Update: using the incoming and outgoing short- and longwave radiation data from the new processing chain from 2010 onwards, filling also data gaps in pre-2010 data.

Update: dataset extended to 2016-10-04T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: Version 3

en:
Deprecated version. Release notes:

Bug fix: in version 2, the undercatch correction was not applied correctly

Bug fix: in version 2, snow lysimeter data was missing for extended periods of time

Update: dataset extended to 2016-01-02T00:30

Update: refreshing data originating from MeteoSwiss (particularly precipitation)

en: Undercatch correction

en: This document describes how the undercatch correction for the Weissfluhjoch measurement site was determined.

en: SNOWPACK sno file

en: This sno-file can be used to run SNOWPACK simulations with the WFJ data set, using version 3.4.0 or higher.

en: Version 6

en:
Deprecated version.

Release notes:

- Missing ISWR for 2009-09-30 and 2010-04-30 has been replaced by data from WFJ Gipfel

This dataset is the basis for the Weissfluhjoch dataset in ESM-SnowMIP (doi: http://dx.doi.org/10.16904/16).

en: Version 7 (current)

en:
Release notes:

Bug fix: in previous versions, snow lysimeter data from September 2010 onwards was erroneously reported for UTC+2, instead of UTC+1 (i.e., reported one hour later than should have been).

Update: dataset extended to 2017-07-11T00:30.

en:
Dataset of meteorological and snowpack measurements from the automatic weather station at Weissfluhjoch, Davos, Switzerland, suitable for driving snowpack models. The dataset contains standard meteorological measurements, and additionally snowpack runoff data from a snow lysimeter. Where possible, data is quality checked and missing data are replaced from backup sensors from the measurement site itself, or (in only a few cases) from the MeteoSwiss weather station at 470 m distance and 150 m above the measurement site.

Publication
Wever, N., Schmid, L., Heilig, A., Eisen, O., Fierz, C., and Lehning, M. Verification of the multi-layer SNOWPACK model with different water transport schemes. 2015. The Cryosphere. Volume 9. 2271-2293. http://dx.doi.org/10.5194/tc-9-2271-2015.

air-temperature

display_name: air-temperature

humidity

display_name: humidity

longwave-radiation

display_name: longwave-radiation

precipitation-amount

display_name: precipitation-amount

shortwave-radiation

display_name: shortwave-radiation

snow-depth

display_name: snow-depth

snow-ice-temperature

display_name: snow-ice-temperature

wind-direction

display_name: wind-direction

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: WFJ_MOD: Meteorological and snowpack measurements from Weissfluhjoch, Davos, Switzerland


disdrometer-data-gotschnagrat

title_for_slug: disdrometer-data-gotschnagrat

en: visibility disdrometer raclets hydrometeors precipitation

en: Disdrometer Data Gotschnagrat

en: The zip folder contains one netCDF file per day for Gotschnagrat from February 11 to March 27 2019 with a temporal resolution of 30 seconds (time in UTC). The naming convention for the files is Gotschna_YYYYMMDD.nc and the files include the following: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

en: A laser optical disdrometer (Parsivel² , OTT Hydromet) was deployed at Gotschnagrat (LON: 9.849, LAT: 46.859) to measure hydrometeors by extinction when passing a laser beam. The instrument can classify eight different kinds of precipitation, including rain, hail, snow, drizzle, and hybrid forms. The dataset contains information on precipitation amount and type for the period of February 11 to March 27 2019 at Gotschnagrat.

disdrometer

display_name: disdrometer

hydrometeors

display_name: hydrometeors

precipitation

display_name: precipitation

raclets

display_name: raclets

visibility

display_name: visibility

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: basic-services nature-conservation urban-compactness forest-persistence spatial-modelling urban-sprawl forest-gain land-use-and-cover-change topography urban-morphology built-up-classification planning-outcome

en: Increase in sanitation service

en: Descricao dos dados em portiuguês

en: Portugues description

en: Master plan Ubatuba (zones)

en: Increase in waste collection service

en: Increase in Normalized Difference Vegetation Index

en: Topographic Index Position (TPI)

en:
Basic education in % per census sector (change per
year)

en: Native forest cover persistence from 2005 to 2015

en: Axial

en: New built-up pixels classified as axial

en: Human Development Index (HDI) per municipality (change per year)

en: Permanent housing density increase

en: slope

en: Slope °

en: Ecological-Economic Zoning (EEZ)

format: SHP

en: Population density per pixel (change per year)

en: Native forest cover gains from 2005 to 2015

en: Increase in clean water provision service

en: Mean income in Reais (R$) per census sector (change per year)

en: Variables description

en: Table of content. Variables description, source, and other important information

en: isolated

en: New built-up pixels classified as isolated

en: Master plan Ihabela (zones)

en: Urban persistence: Built-up 2005 = Built-up 2015

en: infill

en: New built-up pixels classified as infill

en:
The present dataset is part of the published scientific paper entitled “The role of spatial planning in land change: An assessment of urban planning and nature conservation efficiency at the southeastern coast of Brazil” (Pierri Daunt, Inostroza and Hersperger, 2021). In this work, we evaluated the conformance of stated spatial planning goals and the outcomes in terms of urban compactness, basic services and housing provision, and nature conservation for different land-use strategies. We evaluate the 2005 Ecological-Economic Zoning (EEZ) and two municipal master plans from 2006 in a coastal region in São Paulo State, Brazil. We used Partial Least Squares Path Modelling (PLS-PM) to explain the relationship between the plan strategies and land-use change ten years after implementation in terms of urban compactness, basic services and housing increase, and nature conservation.

We acquired the data for the explanatory variables from different sources listed on Table 1. Since the model is spatially explicit, all input data were transformed to a 30 m resolution raster. Regarding the evaluated spatial plans, we acquired the zones limits from the São Paulo State Environmental Planning Division (CPLA-SP), Ilhabela and Ubatuba municipality.

1)	Land use and cover data: Urban persistence, Urban axial, Urban infill, Urban Isolates, Forest cover persistence, Forest cover gain, NDVI increase

We acquired two Landsat Collection 1 Higher-Level Surface Reflectance images distributed by the U.S. Geological Survey (USGS), covering the entire study area (paths 76 and 77, row 220, WRS-2 reference system, https://earthexplorer.usgs.gov/). We classified one image acquired by the Landsat 5 Thematic Mapper (TM) sensor on 2005-05-150, and one image from the Landsat 8 Operational Land Imager (OLI) sensor from 2015-08-15. We collected 100 samples for forest cover, 100 samples for built-up cover and 100 samples for other classes. We then classified these three classes of land cover at each image date using the Support Vector Machine (SVM) supervised algorithm (Hsu et al., 2003), using ENVI 5.0 software.

Land-use and land-cover changes from 2005 to 2015 were quantified using map algebra, by mathematically adding them together in pairs (10*LULC2015 + LULC2005). We reclassified the LULC data into forest gain (conversion of any 2005 LULC to forest cover in 2015); forest persistence (2005 forested pixels that remained forested in 2015); new built-up area (conversion of any 2005 LULC to built-up in 2015); and urban maintenance (2005 built-up pixels that remained built-up in 2015).

To describe the spatial configuration of the urban expansion, we classified the new built-up areas into axial, infill and isolated, following Inostroza et al. (2013) (For details, please refer to Supplementary Material I at the original publication).

The NDVI was obtained from the same source used for the LULC data. With the Google Engine platform, we used an annual average for the best pixels (without clouds) for 2005 and 2015, and we calculated the changes between dates. We used increases of > 0.2 NDVI to represent an improvement in forest quality.

2)	Federal Census data organization: Urban Basic Services and Housing indicator, socioeconomic and population:

The data used to infer the values of basic services provision, socioeconomic and population drivers was derived from the Brazilian National Census data (IBGE, 2000 and 2010). Population density, permanent housing unit density, mean income, basic education, and the percentage of houses receiving waste collection, sanitation and water provision services, called basic services in the context of this study, were calculated per 30 m pixel. The Human Development Index is only available at the municipality level. We attributed the HDI for the vector file with the municipality border, and we rasterized (30 m resolution) this file in QGIS. Annual rates of change were then calculated to allow comparability between LULC periods. To infer the BSH, we used only areas with an increase in permanent housing density and basic services provision (See Supplementary Material I at the original publication).

3)	Topographic drivers

To infer the values of the topographic driver, we used the slope data and the Topographic Index Position (TPI) based on the digital elevation model from SRTM (30 m resolution) produced by ALOS (freely available at eorc.jaxa.jp/ALOS/en/about/about_index.htm), and both variables were considered constant from 2005 to 2015 (See Supplementary Material I at the original publication).

basic-services

display_name: basic-services

built-up-classification

display_name: built-up-classification

forest-gain

display_name: forest-gain

forest-persistence

display_name: forest-persistence

land-use-and-cover-change

display_name: land-use-and-cover-change

nature-conservation

display_name: nature-conservation

planning-outcome

display_name: planning-outcome

spatial-modelling

display_name: spatial-modelling

topography

display_name: topography

urban-compactness

display_name: urban-compactness

urban-morphology

display_name: urban-morphology

en: Spatially explicit data to evaluate spatial planning outcomes in a coastal region in São Paulo State, Brazil


photogrammetric-drone-data-schurlialp

maintainer: Yves Bühler

title_for_slug: photogrammetric-drone-data-schurlialp

en: wingtra uav drone-data orthophoto photogrammetry dsm

en: Data Access

en:
- 10 cm DSM
- 10 cm HS
- 3 cm orthophoto
- original RGB images
- Agisoft Metashape Processing Report

All of the products are also available as a cloud optimized geotiff.

en: The data was collected on 16.04.2021 and on 28.05.2021 with a Wingtra Gen II and a Sony RX1 II RGB sensor to obtain snow depth and distribution data. Following the data collection, the data was processed with Agisoft Metashape. A 10cm DSM, a 10cm snow depth raster, a 3mm orthophoto and the original drone images are available for download.

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

uav

display_name: uav

wingtra

display_name: wingtra

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Photogrammetric Drone Data Schürlialp


maintainer: Anita C Risch

en: soil-properties herbivore-exclusion nutrient-addition climate microbial-biomass-carbon microbial-respiration anthropogenic-management

en: Risch et al. GEB_data.xlsx

en:
Study sites and experimental design
We collected data from 23 sites that are part of the Nutrient Network Global Research Cooperative (NutNet, https://nutnet.umn.edu/). The mean annual air temperature (MAT) across these sites ranged from -4 to 22°C, mean annual precipitation (MAP) from 252 to 1592 mm, and elevations from 6 to 4261 m above sea level (Fig 1a, Supplementary Table S1), hence cover a wide range of climatic conditions under which grasslands occur (Fig 1b). Soil organic C concentrations ranged between 0.8 to 7.8%, soil total N concentrations between 0.1 and 0.6%, and the soil C:N ratio between 9.1 and 21.5. Soil clay content spanned from 3.0 to 35%, and soil pH from 3.4 to 7.6 (Supplementary Table S2).
At each site, the effects of nutrient addition and herbivore exclusion were tested via a randomized-block design (Borer et al., 2014). Three blocks with 10 treatment plots each were established at each site, except for the site at bldr.us (only two blocks). Each of these 10 plots was randomly assigned to a nutrient or fencing treatment. An individual plot was 5 x 5 m, divided into four 2.5 x 2.5 m subplots. Each subplot was further divided into four 1 x 1 m square sampling plots, one of which was set aside for soil sampling (Borer et al., 2014). Plots were separated by at least 1 m wide walkways. We collected soil samples from four different treatments for this study: (i) untreated control plots (Control), (ii) herbivore exclusion plots (Fence), (iii) plots fertilized with N, P, K, plus nine essential macro and micronutrients (NPK), and (iv) plots with simultaneous fertilizer addition and herbivore exclusion (NPK+Fence). The experiments were established at different times in the past, with years of treatment different among sites (2 – 9 years since start of treatment; Supplementary Table S1). For the nutrient additions, all sites applied 10 g N m-2 each year as time-release urea; 10 g P m-2 yr-1 as triple-super phosphate; 10 g K m-2 yr-1 as potassium sulfate. A micro-nutrient mix (Fe, S, Mg, Mn, Cu, Zn, B, Mo, Ca) was applied at 100 g m-2 together with K in the first year of treatments but not thereafter.
We excluded large vertebrate herbivores (Fence) by fencing two plots, one with and one without NPK additions, within each block. The fences excluded all aboveground mammalian herbivores with a body mass of over 50 g (Borer et al., 2014). At most sites, the fences were 180 cm high, and the fence contained a wire mesh (1 cm holes) for the bottom 90 cm with a 30 cm outward-facing flange stapled to the ground to exclude burrowing animals. Climbing and subterranean animals may potentially still access these plots (Borer et al., 2014). For slight modifications in fence design at a few sites see Supplementary Table S3. Most sites only had wild herbivores, although four sites were also grazed by domestic animals (Supplementary Table S1).

Collection of soil samples, soil microbial respiration, microbial biomass, and other soil properties
Each of the 23 sites received a package containing identical material from the Swiss Federal Institute for Forest, Snow and Landscape Research WSL, Switzerland to be used for sampling (Risch et al., 2015; Risch et al., 2019). We collected two soil cores of 5 cm diameter and 12 cm depth in each sampling plot and composited them to measure MR, MBC, and soil chemical properties (see below). An additional sample (5 x 12 cm) was collected to assess soil physical properties. This sample remained within a steel sampling core after collection and both ends were tightly closed with plastic caps to avoid disturbance. All soils were shipped cooled to the laboratory at (Location will be disclosed after manuscript acceptance) within a few days after collection. Soils were sampled roughly 6 weeks prior to peak biomass at each site during 2015 and 2016.
To assess MR (CO2 production) in a laboratory incubation experiment we weighed duplicate soil samples (8 g dry soil equivalent) into 50-ml Falcon tubes. No additional substrate (glucose, sugar) was added to these samples. We adjusted the soil moisture of each sample to 60% field capacity. We then placed a 15 ml plastic test tube (Semadeni 1701A) containing 7.25 ml 0.05 M NaOH over each soil sample. The test tube was fixed with a plastic rod so that it was not in contact with the soil sample. The Falcon tubes were then sealed with a screw cap and placed in an incubator under completely dark conditions at 20°C. The CO2 produced by microbial respiration was absorbed by the 0.05 M NaOH. For five weeks we measured the decrease in conductivity within the 0.05 M NaOH solution on a weekly basis with a Multimeter WTW Multi 3410 (WTW GmbH, Germany) and replaced the 0.05 M NaOH with fresh solution. We included Falcon tubes without soil samples in each incubation run as blanks to test if tubes were tight and no CO2 could enter or escape. We calibrated the relationship between conductivity reduction and NaOH absorbed as follows: 400 ml 0.05 M NaOH was placed in a beaker and its conductivity was measured with the multimeter. While stirring, air containing CO2 was blown into the solution for approximately one minute, which reacts with NaOH to form Na2CO3. After this process, conductivity was measured again. We then transferred 7.25 ml of the solution into a smaller beaker and added 1 ml of 0.1 M BaCl2 to precipitate Na2CO3 and then titrated the solution with 0.05 M HCl to determine the remaining NaOH. We then repeated these steps with the remaining solution a total of nine times and plotted the conductivities (y-axis) against the NaOH consumed (x-axis, Supplementary Fig S1). This regression line was used to infer the consumption of NaOH from the conductivity reduction in the incubation experiments and to calculate CO2 evolution during incubation. In addition, we determined the optimum concentration for the NaOH solution in series of preliminary experiments, so that the concentration was not too high to become insensitive, but also not too low so that not all NaOH reacts during incubation. We then calculated MR (mg CO2-C kg dry soil-1 h-1) as total amount of CO2 released over the 5 weeks divided by the duration of the entire incubation in hrs.
Soil microbial biomass carbon (MBC; mg C kg soil-1 ) was measured at the beginning of the experiment by measuring the maximal respiratory response to the addition of glucose solution (4 mg glucose per g soil dry weight dissolved in distilled water; substrate-induced respiration method) on approximately 5.5 g of soil (J. P. E. Anderson & Domsch, 1978; Nico Eisenhauer et al., 2018; Scheu, 1992). For this purpose we used an O2-micro-compensation apparatus (Scheu, 1992). More specifically, substrate-induced respiration was calculated from the respiratory response to D-glucose for 10 hr at 20°C. Glucose was added according to preliminary studies to saturate the catabolic enzymes of microorganisms (4 mg g soil-1 dissolved in 400 ml deionized water). The mean of the lowest three readings within the first 10 hrs (between the initial peak caused by disturbing the soil and the peak caused by microbial growth) was taken as maximum initial respiratory response (MIRR; ml O2 kg soil-1 h-1) and microbial biomass (mg C kg soil-1) was calculated as 38 x MIRR (Beck et al., 1997; Cesarz et al., 2022; Thakur et al., 2015).
The rest of the composited sample was dried at 65°C for 48 h, ground and sieved (2 mm mesh) to assess the soil pH, mineral soil total C and N and C:N ratio, and mineral soil organic C (Risch et al., 2019). The undisturbed sample was used to assess water holding capacity (WHC), bulk density (BD), and soil texture [sand, silt, clay; methods in (Risch et al., 2019)]. We used the percentage of sand and clay as an indicator of soil texture in this study. MAT (°C), MAP (mm) and temperature of the wettest quarter (°C) were obtained from www.worldclim.com (Fick & Hijmans, 2017; Hijmans, Cameron, Parra, Jones, & Jarvis, 2005). These variables were selected as they were found to be drivers of soil nutrient processes across these sites in earlier studies (Risch et al., 2020; Risch et al., 2019). Mean annual soil temperatures (MAST; °C) for the 0 to 5 cm soil layer were obtained for each site from the SoilTemp maps (J. Lembrechts et al., 2021; J. J. Lembrechts et al., 2022), global gridded modelled products of soil bioclimatic variables for the 1979-2013 period at a 1-km² resolution, based on CHELSA, ERA5 and in-situ soil temperature measurements.
Numerical calculations and statistical analyses
We calculated MMQ as MR/MBC. We corrected this measure using the average soil temperature of each site (MMQsoil). This temperature correction is necessary as incubation temperatures are usually much higher than site mean annual soil temperatures (see Xu et al. 2017). MMQsoil = MMQ x Q10(MAST – 20)/10, where Q10 was assumed to be 2 (Xu et al. 2017). See Supplementary Fig S2 for comparison of air and soil temperatures across the 23 sites as well as the incubation temperature.
Some of the explanatory variables (clay, soil organic C, C:N ratio) were skewed and were thus log-transformed prior to analyses. All continuous explanatory variables were centred and scaled to have a mean of zero and variance of one. To avoid collinearity between them we filtered them using correlation analysis (Supplementary Fig S3). From the variables that were strongly correlated (Pearson’s |r| > 0.70) (Dormann et al., 2013), we selected the ones that allowed us to minimize the number of variables (Supplementary Fig S3). Specifically, soil total N concentration, soil total C concentration, soil sand content and soil bulk density were dropped from the dataset. We then assessed how these edaphoclimatic variables are related to MMQ across our global grasslands.
For this, we used linear mixed effects models (LMMs) fitted by maximum likelihood with the lme function in the nlme package (version 3.1-153) (Pinheiro, Bates, DebRoy, & Sarkar, 2021) in R version 3.6.3. (R Core Team, 2019). We used treatment as a fixed effect and plot nested in site as random effects to assess treatment differences in MMQsoil, as well as MR, and MBC. The number of years since the treatment started was included as a fixed effect in all the initial models but was not significant and therefore not retained in the models. To assess how differences in MMQsoil were affected by environmental factors (soil, climatic properties) we again used LMMs. Soil and climatic properties were included as fixed effects and plot nested in site as random effects. We did not include interactions between environmental variables. We then used the MuMin package (Barton, 2018) (version 1.42.1) to select the best models that explained the most variation based on Akaike’s information criterion (AIC; model.avg function). We used the corrected AIC (AICc) to account for our small sample size and selected the top models that fell within 4 AICc units (delta AICc < 4) (Burnham & Anderson, 2002; Johnson & Omland, 2004). We present all our top models rather than model averages. Conditional averages are provided in the Supplementary material.
Based on findings from analyses described above and the literature, we developed a conceptual model of direct and indirect relationships between both edaphoclimatic variables and experimental treatments (Supplement Figure S4) to obtain a more holistic approach in understanding how these properties affect MMQsoil. We had data from 23 sites with 272 observations. We tested this model using structural equation modelling based on a d-sep approach (Lefcheck, 2016; Shipley, 2009). We considered those environmental drivers that were included in our top LMMs, namely temperature of the wettest quarter (T.q.wet), soil pH, water holding capacity (WHC) and soil organic C (organic C; Supplementary Figure S4). These factors were allowed to directly affect MMQsoil, and via their interactions with treatments. In addition, treatments were allowed to directly affect MMQsoil. Treatments were included as dummy variables in the model. We tested our conceptual model (Supplementary Fig S4) using the piecewiseSEM package (version 2.0.2; Lefcheck, 2016) in R 3.4.0, in which a structured set of linear models are fitted individually. This approach allowed us to account for the nested experimental design, and overcome some of the limitations of standard structural equation models, such as small sample sizes (Lefcheck, 2016; Shipley, 2009). We used the lme function of the nlme package to model response variables, including site as a random factor. Good fit of the SEM was assumed when Fisher’s C values were non-significant (p > 0.05). For all significant interactions between soil or climate variables and treatments detected in the SEMs, we calculated treatment effect sizes, i.e., the differences in MMQsoil between Control and treatments as log response ratios (LRR) and plotted these values against the climate or soil factors. The LRR were defined as log(Control/Treatment), where treatment was either Fence, NPK or NPK+Fence. To assess which of the LRR-climate or soil property relationships were significant we again used LMMs, in which soil and climatic properties were included as fixed effects and plot nested in site as random effects.

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch Anita C., Zimmermann, Stefan, Schütz, Martin, Borer, Elizabeth T., Broadbent, Arthur A.D., Caldeira, Maria C., Davies, Kendi F., Eisenhauer, Nico, Eskelinen, Anu, Fay, Philip A., Hagedorn, Frank, Knops, Johannes M.H., Lembrechts, Jonas, J., MacDougall, Andrew S., McCulley, Rebecca L., Melbourne, Brett A., Moore, Joslin L., Power, Sally A., Seabloom, Eric W., Silveira, Maria L., Virtanen, Risto, Yahdjian, Laura, Ochoa-Hueso, Raul (accepted). Drivers of the microbial metabolic quotient across global grasslands. Global Ecology and Biogeography

Please cite this paper together with the citation for the datafile.

The microbial metabolic quotient (MMQ; mg CO2-C mg MBC-1 h-1), defined as the amount of microbial CO2 respired (MR; mg CO2-C kg soil-1 h-1) per unit of microbial biomass C (MBC; mg C kg soil-1), is a key parameter for understanding the microbial regulation of the carbon (C) cycle, including soil C sequestration. Here, we experimentally tested hypotheses about the individual and interactive effects of multiple nutrient addition (NPK+micronutrients) and herbivore exclusion on MR, MBC, and MMQ across 23 sites (5 continents). Our sites encompassed a wide range of edaphoclimatic conditions, thus we assessed which edaphoclimatic variables affected MMQ the most and how they interacted with our treatments. Soils were collected in plots with established experimental treatments. MR was assessed in a five-week laboratory incubation without glucose addition, MBC via substrate-induced respiration. MMQ was calculated as MR/MBC and corrected for soil temperatures (MMQsoil). Using LMMs and SEMs, we analysed how edaphoclimatic characteristics and treatments interactively affected MMQsoil. MMQsoil was higher in locations with higher mean annual temperature, lower water holding capacity, and soil organic C concentration, but did not respond to our treatments across sites as neither MR nor MBC changed. We attributed this relative homeostasis to our treatments to the modulating influence of edaphoclimatic variables. For example, herbivore exclusion, regardless of fertilization, led to greater MMQsoil only at sites with lower soil organic C (<1.7%). Our results pinpoint the main variables related to MMQsoil across grasslands and emphasize the importance of the local edaphoclimatic conditions in controlling the response of the C cycle to anthropogenic stressors. By testing hypotheses about MMQsoil across global edaphoclimatic gradients, this work also helps to align the conflicting results of prior studies.

anthropogenic-management

display_name: anthropogenic-management

climate

display_name: climate

herbivore-exclusion

display_name: herbivore-exclusion

microbial-biomass-carbon

display_name: microbial-biomass-carbon

microbial-respiration

display_name: microbial-respiration

nutrient-addition

display_name: nutrient-addition

soil-properties

display_name: soil-properties


aerosol-data-davos-wolfgang

title_for_slug: aerosol-data-davos-wolfgang

en: raclets particles drincz aerosol inp ice-nucleation

en: SMPS Dataset Davos Wolfgang

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity), in a temporal resolution of 2 minutes, with time in UTC, measured at Davos Wolfgang.

mimetype: application/x-netcdf

en: OPC-N3 Dataset Davos Wolfgang

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: APS Dataset Davos Wolfgang

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Davos Wolfgang.

en: OPC GT-526S Dataset Davos Wolfgang

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en: DRINCZ Dataset Davos Wolfgang

en: The DRINCZ file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs) and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3788 , TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and DRINCZ: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l minˉ¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the DRoplet Ice Nuclei Counter Zurich (DRINCZ, ETH Zurich) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

drincz

display_name: drincz

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

particles

display_name: particles

raclets

display_name: raclets

en: Aerosol Data Davos Wolfgang


en: perialpine-lakes climate-change lake-level-regulation hydrologic-and-hydrodynamic-modelling switzerland

en: Lake water level scenarios CH2018

en: Lake water level scenarios for Lake Walen, Lake Zurich, Lake Brienz and Lake Thun.

format: XLS

en: Lake characteristics

en: Lake characteristics: stage-area relation for Lake Walen, Lake Zurich, Lake Brienz and Lake Thun, stage-discharge relations for the unregulated Lake Walen and semi-regulated Lake Brienz and, lake level management rules for the two regulated lakes Zurich and Thun.

en: Lake outflow scenarios CH2018

en: Lake outflow scenarios for Lake Walen, Lake Zurich, Lake Brienz and Lake Thun.

en:
The dataset "Lake_climate_change_scenarios_CH2018" provides simulation-based climate change impact scenarios for perialpine lakes in Switzerland. These transient future scenarios were produced by combining the hydrologic model PREVAH with the hydrodynamic model MIKE11 to simulate daily lake water level (Lake_water_level_scenarios_CH2018.xls) and outflow scenarios (Lake_outflow_scenarios_CH2018.xls) from 1981 to 2099, using the Swiss Climate Change Scenarios CH2018. The future scenarios contain a total of 39 model members for three Representative Concentration Pathways, RCP2.6 (concerted mitigation efforts), RCP4.5 (limited climate mitigation) and RCP8.5 (no climate mitigation measures). These scenarios result from the study titled "Lower summer lake levels in regulated perialpine lakes, caused by climate change," authored by Wechsler et al. in 2023.

The dataset emphasizes four specific Swiss lakes, each subject to different degrees of lake level management: an unregulated lake (Lake Walen), a semi-regulated lake (Lake Brienz), and two regulated lakes (Lake Zurich and Lake Thun).

In addition, the file (Lake_characteristics.xlsx) includes data used in the modeling process, encompassing the stage-area relation for the four lakes, stage-discharge relations for the unregulated and semi-regulated lakes, and lake level management rules for the two regulated lakes.

climate-change

display_name: climate-change

hydrologic-and-hydrodynamic-modelling

display_name: hydrologic-and-hydrodynamic-modelling

lake-level-regulation

display_name: lake-level-regulation

perialpine-lakes

display_name: perialpine-lakes

switzerland

display_name: switzerland

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Frank Techel

en: avalanche-accident avalanche-accident-statistics avalanche-statistics long-term-trends avalanche-fatalities

en: Data avalanche fatalities 1969/1970 - 2014/2015

media_type: text/plain

en: The data comprises avalanche fatality data from the Alpine regions in the seven countries Austria, France, Germany, Italy, Liechtenstein, Slovenia, and Switzerland.

format: TXT

mimetype: text/plain

en:
During the last 45 years, about 100 people lost their lives in avalanches in the European Alps each year. Avalanche fatalities in settlements and on transportation corridors have considerably decreased since the 1970s. In contrast, the number of avalanche fatalities during recreational activities away from avalanche-secured terrain doubled between the 1960s and 1980s and has remained relatively stable since, despite a continuing strong increase in winter backcountry recreational activities.

Data complementing Figure 2 in:
_"Avalanche fatalities in the European Alps: long-term trends and statistics"_, by Techel, F., Jarry, F., Kronthaler, G., Mitterer, S., Nairz, P., Pavšek, M., Valt, M., and Darms, G.

Data description:
please refer to section 2 (Data and Methods) in the mentioned publication

avalanche-accident

display_name: avalanche-accident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

avalanche-statistics

display_name: avalanche-statistics

long-term-trends

display_name: long-term-trends

en: Avalanche fatalities in the European Alps (1969/1970 - 2014/2015)


maintainer: Elisabeth Hafner

en: validation avalanche-hazard-mapping snow satellite avalanche

en: Satellite Avalanche Mapping Validation data and data description

en: 14 shapefiles to be used only together with the data description also provided as a pdf.

en:
Validation points, validation area, ground truth coverage, SPOT 6 avalanche outlines, Sentinel-1 avalanche outlines, Sentinel-2 avalanche outlines, Davos avalanche mapping (DAvalMap) avalanche outlines as shapefiles and a detailed attribute description (DataDescription_EvalSatMappingMethods.pdf).

Coordinate system: CH1903+_LV95

The generation of this dataset is described in detail in:

Hafner, E. D., Techel, F., Leinss, S., and Bühler, Y.: Mapping avalanches with satellites – evaluation of performance and completeness, The Cryosphere, https://doi.org/10.5194/tc-2020-272, 2021.

avalanche

display_name: avalanche

avalanche-hazard-mapping

display_name: avalanche-hazard-mapping

satellite

display_name: satellite

snow

display_name: snow

validation

display_name: validation

en: Satellite avalanche mapping validation data