en: List of authors and list of the editorial board of the European Snow Booklet

en:
Here you can find the list of all lead authors of the different chapters of the European Snow Booklet (ESB).
In addition a list of the editorial board that reviewed the ESB is given.

en: European Snow Booklet public metadata

en:
The core of the European Snow Booklet (ESB), the country reports of 38 European countries, are based on information and metadata on snow measurements collected through a comprehensive survey, the ESB Questionnaire, between August 2017 and March 2018. The station metadata (for example location, elevation, measurement start date) from each country was provided by one or several institutions responsible for snow observations. By answering the questionnaire the contacts agreed that the information and metadata provided could be presented in the ESB. For cases where institutions indicated that information on station locations could be made publicly available, the metadata for the variables snow depth (HS), depth of snowfall (HN) and water equivalent of the snow cover (SWE), is additionally provided here for download (METADATA.xlsx).
Please note that not all institutions gave permission to publish their station metadata. This metadata has to be requested from the non-personal institution contacts provided in the METADATA.xlsx file. In some cases, however, no institutional contact is available and thus the contact of the country representative who filled in the questionnaire is used.
For current, updated station metadata we refer to the (non-personal) institutional contacts provided in METADATA.xlsx and/or the institution webpages. Note, however, that we cannot guarantee for completeness of the dataset for all countries because operational networks are prone to changes.

en: COST European Snow Booklet (ESB) - DORA Link

media_type: text/html

en: DORA Link of the COST European Snow Booklet (ESB).

format: HTML

en: European Snow Booklet unpublished metadata

en: The entire station metadata of all European institutions that contributed data is stored in METADATA_unpublished.xlsx. This file, however, cannot be accessed, since not all institutions gave permission to publish their station metadata. If you wish to access the metadata, please send a request to marty@slf.ch stating clearly why you want to access these metadata. NOTE: in this file ONLY station metadata (Lat/Lon/Altitude) is given, NO measured snow depth data.

en: COST European Snow Booklet (ESB)

en: Please find here the web version of the COST European Snow Booklet (ESB).

en:
The European Snow Booklet (ESB) is a book of reference for snow measurements that has been produced through collaboration with many European snow practitioners and snow scientists in the framework of the European Cooperation in Science and Technology (COST) Action ES1404 “A European network for a harmonised monitoring of snow for the benefit of climate change scenarios, hydrology and numerical weather prediction (HarmoSnow)”. The ESB provides a unique collection of information about operational snow observations in the European countries and the methods used to perform basic measurements of snow on the ground: snow depth (HS), depth of snowfall (HN), water equivalent of the snow cover (SWE) and presence of snow on the ground (PSG). Information and station metadata (for example location, elevation) for these basic snow variables were collected through a comprehensive survey, the ESB questionnaire between August 2017 and March 2018. Numerous institutions of 38 European countries provided detailed information describing the status of the operational snow observations and the methods used at the time of the survey. Based on the information provided, a country report was written for each European country. Similarities and differences among the countries, that is, the choice of snow variables to be measured, the measurement principles applied, the number of stations, or the spatial and elevational station distribution are pointed out. Thus the collection of country reports demonstrates the relevance of snow measurements for each country. Thus, the intention of the ESB is to foster better knowledge transfer regarding snow measurements between the snow science and operational communities and to improve the communication of information to the general public.

For detailed information on the European countries, we refer to the ESB, which can be downloaded here (envidat.ch). Please note that the ESB is not a living document and information and station metadata are from August 2017 till March 2018, except for Latvia (metadata updated in December 2018).

depth-of-snowfall

display_name: depth-of-snowfall

harmonisation-of-snow-measurements

display_name: harmonisation-of-snow-measurements

snow-depth

display_name: snow-depth

snow-measurement-methods

display_name: snow-measurement-methods

water-equivalent-of-the-snow-cover

display_name: water-equivalent-of-the-snow-cover

en: European Snow Booklet – an Inventory of Snow Measurements in Europe


maintainer: EnviDat Support

en: swiss-forest-lab meteorology precipitation long-term relative-humidity wind-speed meteo par climate-change temperature

state: active

type: dataset

en: Data plot of the field station (NOF)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

format: PDF

mimetype: application/pdf

en: Site photo of the forest station (NOB)

en: Site photo of the forest station from the side.

format: SERVICE

mimetype: image/jpeg

en: Forest station data (NOB)

media_type: text/csv

en: Data file.

format: CSV

mimetype: text/csv

en: Site aerial photo (Novaggio)

en: Site aerial photo from both Novaggio stations. Source: Google. 2016. Site aerial photo from both Novaggio stations. Retrieved November 15, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (NOB)

en: Site photo of the field station (NOF)

en: Site photo of the field station from the side.

en: Field station data (NOF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Novaggio in Switzerland where one station is located within a natural deciduous forest stand (NOB) with Turkey oak (_Quercus cerris_; 70 yrs), sweet chestnut (_Castanea sativa_; 90 yrs) and silver birch (_Betula pendula_; 70 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Novaggio is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Novaggio, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


maintainer: Adam Winstral

en: snow-simulation snow-depth jim jules-investigation-model snow

media_type: text/plain

en: File/data descriptor

format: TXT

mimetype: text/plain

en: DEM

en: 1-km resolution DEM used for downscaling gridded NWP data to stations and for distributing BDE evaluations at HS-stations to SWE-stations

en: HS and SWE observations

media_type: application/zip

en: Automated (HS) and manual (SWE) data used to evaluate model simulations

format: ZIP

mimetype: application/zip

en: Station forcing data

en: All forcing data need to run JIM at HS and SWE stations. These are data downscaled directly from COSMO NWP data (WY14, WY15) and further enhanced by additional station observations of snow depth (HS) and air temperature (Ta) in WY17. Further information can be found in README file. Note that in WY14 and WY15, shortwave radiation was not split into direct and diffuse (not necessary for JIM) and that the default method in JIM for splitting precipitation phase was used. In WY 17, direct and diffuse were combined as input to JIM and JIM was forced with pre-processed liquid and solid precipitation phases.

en: These data were used to drive and evaluate Jules Investigation Model (JIM) snow simulations. The data provided are the forcing data used for the "deterministic" runs as described in Winstral et al., 2019. The bias-detecting ensemble (Winstral et al., 2019) used observed snow depths (HS) to detect biases in these deterministic simulations related to precipitation and energy inputs to JIM. Simulations that included the BDE evaluations substantially improved JIM simulations.

jim

display_name: jim

jules-investigation-model

display_name: jules-investigation-model

snow

display_name: snow

snow-simulation

display_name: snow-simulation

en: Meteorological data used to develop and validate the bias-detecting ensemble (BDE)


maintainer: Tobias Wechsler

en: ecosystem-protection decision-making integral-water-management hydropower gis

format: SHP

en: Indicators

en: The indicators capture supporting ecosystem functions.

en:
 A spatial dataset and tool to simultaneously assess hydropower potential and ecological potential of the Swiss river network (Version 2016)

 Introduction
The steadily growing demand for energy and the simultaneous pursuit of decarbonisation are increasing interest in the expansion of renewable energies worldwide. In Switzerland, various funding projects have been launched to promote technologies in the field of renewable energies and their application as quickly as possible. With the introduction of a funding instrument in 2009, the number of projects submitted to produce renewable energies increased rapidly. The applications for small hydropower plants (≤ 10 MW) were correspondingly numerous. However, the assessment of the environmental impact and its comparison with hydropower importance is still not standardized.
To provide a basis for decision-making, a methodology was developed to determine the overall hydropower potential of a region. A detailed assessment of each river reach, and the systematic and holistic assessment of small hydropower projects at a regional scale are combined here. The assessment of a river reach is conducted at the river space (i.e., the river and adjacent areas) and at the surrounding landscape level. The HYDROpot_integral methodology was developed as part of Carol Hemund's dissertation (2012) at the University of Bern. It allows the evaluation of river reaches holistically, regarding ecological, social, economic and cultural criteria. As a second part of the overall project, the theoretical hydropower (or hydraulic) potential was calculated for the entire river network, which complemnets the spatial assessment. In particular, it is possible to classify river reaches into those that are more suitable for hydropower production (=”use”) and those that are more suitable for protection.

 Material and method
The HYDROpot_Integral method was developed and tested on the basis of cantonal and national data (Hirschi et al. 2013). The method relies on 73 geodata sets. This holistic assessment is the key element of the entire assessment procedure. Its aim is to quantify the importance of the ecosystem functions in terms of services. The river network (GWN07) is divided into reaches of about 450m and for each reach two study units are defined. The river space (RS) records the ecosystem functions of the water body and the nearby riparian area. The length of the RS is 315 m on average in Switzerland and a maximum of 450 m, whereas the width is based on the FOEN definition (BWG 2001: 18f) and varies between 7-107 m. The surrounding landscape (SLS) is the second survey unit that records the ecosystem functions of the surrounding area over a range of 21 m to 321 m. The SLS is calculated over three times the RS width. The length of the SLS is identical to the length of the RS. The ecosystem functions are divided into three types: regulating (service A), cultural (service B) and provisioning (service C) functions. Accordingly, the assessment of the functions is divided into three parts and three values are assigned to each river reach. The more functions there are and the greater their performance, the higher these values are and the more important the corresponding functions are. Hence, these values quantify the importance of the ecosystem functions and the ecological, cultural and economic ecosystem services of each river reach. The concatenation of ecosystem services results in a value (ABC) that can occur in 125 different versions due to the chosen five-level value scale; i.e. each digit of the three-digit number sequence can be assigned a value between 1 and 5. Each of the 125 combinations, and thus each river reach, has its own characteristics determined by the assessments of the three function types. To record the suitability, the combinations are ranked according to their ecological, cultural and economic ecosystem services. These rules mean that the combination that is most suitable for hydropower production at minimum cost in terms of ecological and cultural ecosystem services and has a high economic potential is ranked first; rank 125 indicates the highest ecological and cultural ecosystem services and the lowest economic services and is therefore most suitable for protection. A river reach that is excluded from hydropower use due to legislation, a so-called priority reach, is given rank 126 from the outset and specially marked. A more detailed description of the methods can be found in Hirschi et al. 2013 [Link]. The dataset presented here presents the latest state of the HYDROpot_integral methodology applied at the national level. Only national data that is easily accessible was used in the preparation of the dataset. The cantonal data, such as renaturation and revitalization, would have to be requested by each canton individually and was excluded here. The nationwide value synthesis was made with R.
A list of data sources can be found here [link to text file]
A list of all parameters can be downloaded here [link to PDF and text files]

 Dataset description
Data is presented as a single shapefile. It contains the river network and all assessment results obtained with HYDROpot_Integral.

 Changes in the methodology compared to the original method (Hirschi et. al 2013)

 * RS_A11 Ecomorphology: recorded for the whole of Switzerland and zero values equated with NA;
individual cantons such as Zug and St. Gallen have no mapped values according to the modular
concept of the federal government, Valais and Graubünden only the main valleys, Ticino and Fribourg not
completely (BAFU 2009).
 * RS_A14 Renaturation and revitalization data: not centrally available at the time of data collection.
centrally available, therefore values in GR were equated with NA.
 * RS_A15 Dilution ratio at wastewater treatment plants (WWTPs) for discharges: Zero values
equal to NA.
 * RS_A20 Water flow: use WASTA (2013) with hydroelectric power plants (> 300 kW) under
Federal control and dams serving hydroelectricity (Dam, as of 2013).
 * RS_C05 Synoptic hazard maps: are cantonally managed at the time of data collection,
Values in GR are marked with a 5 so that the systematics in the decision tree is not affected.
is affected.
 * Water quality (RS_A15, RS_A16, RS_A17, RS_A18, RS_A19): for the evaluation of the function type.
A Nature, it is important whether the median of the five values is less than or equal to 3 in total. This
evaluation is based on the decision tree for evaluating GR (Hirschi et al. 2013:22).
Therefore, an evaluation of the station data is made where critical and possible river segments
with poor quality (median less than 3) exist. Only two longer and one short
sections in Switzerland receive a lower median than 3 for water quality.
 * SLS_B06 Visibility: For 99 percent of the river segments (30,733 of 31,062) in the canton of
Bern (2015 reduced version), the landscape area is considered to be visible. Due to this high number
of sections, a large number of viewpoints in the layer of Swisstopo and
the computation time and computability in ArcGIS, the landscape area is classified as generally viewable
(equal to 1).
16 Method
Additional indicators were added (see Appendix B.2):
 * SLS_A21 Dissection
 * SLS_A22 Forest areas
 * SLS_B03 Hiking trails
 * SLS_B10 Residential and vacation homes
 * SLS_B11 Tourist infrastructure
 * SLS_C01 Landfill
 * SLS_C03 Infrastructure
 * SLS_C05 Industry
 * SLS_C06 Agricultural land
Not to be added, although present to some extent:
 * SLS_B06 Cultural assets of national importance: here, too, the calculability of the visibility analysis is
for the whole of Switzerland is limited
 * SLS_A15 Legally binding protection and land use planning: the individual river sections are not
clearly designated, i.e. no geodata exist
The following data are also not supplemented, as they are cantonal data:
 * SLS_A10 Cantonal nature reserves
 * SLS_A16 Forest reserves
 * SLS_A17 Cantonal inventories and contractually protected areas

decision-making

display_name: decision-making

ecosystem-protection

display_name: ecosystem-protection

gis

display_name: gis

hydropower

display_name: hydropower

integral-water-management

display_name: integral-water-management


maintainer: Lyu

en: species-range-map species-richness pinales species-distribution-model species-occurrence fagales

en: Species range maps of species in Fagales and Pinales (with enough occurrences)

en: species_map.zip includes species 1690 range maps generated based on the integrated method described in Lyu et al., (2022). File names with (polygon) indicate that this map is only generated by polygon mapping, as there are not enough occurrences for SDMs.

en: Occurrence maps for species of Fagales and Pinales with few records

en: Point_buffer.zip includes 267 occurrence maps of species that do not have enough occurrence data for polygon mapping.

en:
This database contains 1957 distribution maps of species from Fagales and Pinales constructed based on a method integrating polygon mapping and SDMs (Lyu et al., 2022).
To construct the maps, we first collected occurrence data from 48 different sources. According to the number of occurrences after data cleaning, three kinds of maps are constructed: (1) For species with more than 20 occurrences, we performed SDM and polygon mapping described in Lyu et al. (2022) and select the integration of the two layers as the distribution range; (2) For species with more than 4 but less than 20 occurrences, we only use polygon mapping to draw the distribution range; (3) For species with less than 4 occurrences, a 20-km buffer was generated around the occurrences as the distribution range. The maps were manually checked and evaluated (see Note S3 and Table S9 in Lyu et al., 2022 for details).

fagales

display_name: fagales

pinales

display_name: pinales

species-distribution-model

display_name: species-distribution-model

species-occurrence

display_name: species-occurrence

species-range-map

display_name: species-range-map

species-richness

display_name: species-richness

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Species distribution maps of Fagales and Pinales (GDPlants)


maintainer: Thomas Wohlgemuth

en: biodiversity soil-impacts forest-management pairwise-stand-comparisons biogeography

en: Baseline data

en: headers

en: Description of headers for data_wohlgemuth_etal_Neobiota_2022

en: references

en: Bibliography of all references cited in data_wohlgemuth_etal_Neobiota_2022.

format: XLS

en: Compiled data on the impacts of seven important NNTs (Acacia dealbata, Ailanthus altissima, Eucalyptus globulus, Prunus serotina, Pseudotsuga menziesii, Quercus rubra, Robinia pseudoacacia) on physical and chemical soil and biodiversity in Europe, and summarise commonalities and differences. A total of 107 publications considered, studies referred to biodiversity attributes and soil properties: 2804 lines and 30 rows.

biodiversity

display_name: biodiversity

biogeography

display_name: biogeography

forest-management

display_name: forest-management

pairwise-stand-comparisons

display_name: pairwise-stand-comparisons

soil-impacts

display_name: soil-impacts

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Impact of non-native tree species in Europe on soil properties and biodiversity: a review


biogas-aus-hofdunger-in-der-schweiz

title_for_slug: biogas-aus-hofdunger-in-der-schweiz

en: review switzerland bioenergy biogas manure

en: Biogas aus Hofdünger in der Schweiz

en: Ziel dieses Whitepapers ist es, Entscheidungsträgern, Verwaltungen und Stakeholdern die aktuellsten Forschungsergebnisse zur Verfügung zu stellen, um die optimale Nutzung von Bioenergie aus Hofdünger in der Schweizer Energiewende zu fördern. Zu diesem Zweck werden die Ergebnisse des Schweizer Kompetenzzentrums für Bioenergieforschung - SCCER BIOSWEET - zusammengefasst und in einem breiteren Kontext dargestellt. Wenn nichts anderes erwähnt wird, beziehen sich die Ergebnisse auf die Schweiz und im Falle der Ressourcen auf die heimischen Biomassepotenziale.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland


en: timeseries free-climate-data climate-layers air-temperature maximum-temperature minimum-temperature climate century precipitation

en: Data Access

format: GeoTIFF

en: CHELSA Technical Documentation

en: As the CHELSA project is continuously expanded, certain new parameters, time scales etc. are not included anymore in the original publication (Karger et al. 2017). We are therefore provide this document as a guideline of the current climatic parameters available and will expand it as new parameters or time periods will become available. Please refer to the version history for changes made in the document.

en:
CHELSAcruts is a delta change monthly climate dataset for the years 1901-2016 for mean monthly maximum temperatures, mean monthly minimum temperatures, and monthly precipitation sum. Here we use the delta change method by B-spline interpolation of anomalies (deltas) of the CRU TS 4.01 dataset. Anomalies were interpolated between all CRU TS grid cells and are then added (for temperature variables) or multiplied (in case of precipitation) to high resolution climate data from CHELSA V1.2 (Karger et al. 2017, Scientific Data). This method has the assumption that climate only varies on the scale of the coarser (CRU TS) dataset, and the spatial pattern (from CHELSA) is consistent over time. This is certainly a rather crude assumption, and for time periods for which more accurate data is available CHELSAcruts should be avoided if possible (e.g. use CHELSA V1.2 for 1979-2015). Different to CHELSA V1.2, CHELSAcruts does not take changing wind patterns, or temperature lapse rates into account, but rather expects them to be constant over time, and similar to the long term averages.

CHELSAcruts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

century

display_name: century

climate

display_name: climate

climate-layers

display_name: climate-layers

free-climate-data

display_name: free-climate-data

maximum-temperature

display_name: maximum-temperature

minimum-temperature

display_name: minimum-temperature

precipitation

display_name: precipitation

timeseries

display_name: timeseries

en: CHELSAcruts -  High resolution temperature and precipitation timeseries for the 20th century and beyond


en: photobiont bryophyte-life-strategy moss endemic-species functional-taxonomic-groups lichen-growth-form lichen-growthform lichen climate-change-impact biodiversity liverwort endemic elevational-gradient disturbance bryophyte climate-change madeira-island functional-taxonomic-group

en: MadCrypto – Bryophyte and macrolichen diversity in laurel forests of Madeira

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science.

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science 30: 1122–1133.

The excel file contains 5 sheets:
1) Plot information
2) Bryophyte data with species specific information, separated per substrate
3) Macrolichen data with species specific information, separated per substrate
4) Bryophyte data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 2 and 4 might therefore differ slightly.
5) Macrolichen data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 3 and 5 might therefore differ slightly.

biodiversity

display_name: biodiversity

bryophyte

display_name: bryophyte

bryophyte-life-strategy

display_name: bryophyte-life-strategy

climate-change

display_name: climate-change

climate-change-impact

display_name: climate-change-impact

disturbance

display_name: disturbance

elevational-gradient

display_name: elevational-gradient

endemic

display_name: endemic

endemic-species

display_name: endemic-species

functional-taxonomic-group

display_name: functional-taxonomic-group

functional-taxonomic-groups

display_name: functional-taxonomic-groups

lichen

display_name: lichen

lichen-growth-form

display_name: lichen-growth-form

lichen-growthform

display_name: lichen-growthform

liverwort

display_name: liverwort

madeira-island

display_name: madeira-island

moss

display_name: moss

photobiont

display_name: photobiont

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal


causal-effect-of-mfoz

title_for_slug: causal-effect-of-mfoz

en: propensity-score-matching selection-bias causality built-up-land-change the-major-function-oriented-zone fujian-province

en: Data and Stata code for repeating the results

en:
Data.xlsx is the variables of 952 townships
Table 1-2 NN(1-1)_noreplace_caliper(0.01).do is STATA code to produce the results in Table 1 and 2
Figure 5 Distribution of the propensity scores.R is R code rto produce Figure 5
Figure 5 Standard mean difference.R is R code rto produce Figure 5

en:
Title: Closer to causality: How effective is spatial planning in governing built-up land expansion in Fujian Province, China?

Research objective: The Major Function Oriented Zone (MFOZ), the first strategic spatial plan in China, is developed to achieve a coordinated regional development, through spatial regulation and zoning of development. The MFOZ he MFOZ divided land into four major function-oriented zones: The development-optimized zone, the development-prioritised zone, the development-restricted zone, and the development-prohibited zone. We used propensity score marching to evaluate the effect of the MFOZ on built-up land expansion in Fujian Province over three time intervals (2013–2015, 2013–2018 and 2013–2020).

Data: Data.xlsx contains the variables of 954 towns in Fujian Province.
Town_ID is the town unique ID;
County_ID is the county unique ID;
City_ID is the city unique ID;
MFOZ is the the development-prioritised zone and the development-restricted zone (The development-optimized zone and the development-prohibited zone are excluded);
Builtup_13_15 is the built-up land expansion from 2013 to 2015;
Builtup_13_18 is the built-up land expansion from 2013 to 2018;
Builtup_13_20 is the built-up land expansion from 2013 to 2020;
Dis2water is the Euclidean distance from the town to the nearest waterbody;
Slope is the the average slope within the town;
GDP is the average GDP in 2010 within the town;
Pop is the average population in 2010 within the town;
Road is the average population in 2010 within the town;
Dis2city is the Euclidean distance from the town to the nearest prefectural city centre;
Nei_Arable, Nei_Forest, and Nei_Built.up are the area of arable land, forest land, and built-up land neighbouring town i in 2010.

Method: we used the propensity score matching to compare the changes in the amount of built-up land in the towns of the development-prioritised zone with the matched towns of the development-restricted zone. Additionally, we used three evaluation intervals (2013–2015, 2013–2018 and 2013–2020) to evaluate temporal variation in the causal effect of the MFOZ on built-up land expansion.

built-up-land-change

display_name: built-up-land-change

causality

display_name: causality

fujian-province

display_name: fujian-province

propensity-score-matching

display_name: propensity-score-matching

selection-bias

display_name: selection-bias

the-major-function-oriented-zone

display_name: the-major-function-oriented-zone

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Causal effect of MFOZ


disdrometer-data-gotschnagrat

title_for_slug: disdrometer-data-gotschnagrat

en: visibility raclets hydrometeors disdrometer precipitation

en: Disdrometer Data Gotschnagrat

en: The zip folder contains one netCDF file per day for Gotschnagrat from February 11 to March 27 2019 with a temporal resolution of 30 seconds (time in UTC). The naming convention for the files is Gotschna_YYYYMMDD.nc and the files include the following: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

en: A laser optical disdrometer (Parsivel² , OTT Hydromet) was deployed at Gotschnagrat (LON: 9.849, LAT: 46.859) to measure hydrometeors by extinction when passing a laser beam. The instrument can classify eight different kinds of precipitation, including rain, hail, snow, drizzle, and hybrid forms. The dataset contains information on precipitation amount and type for the period of February 11 to March 27 2019 at Gotschnagrat.

disdrometer

display_name: disdrometer

hydrometeors

display_name: hydrometeors

precipitation

display_name: precipitation

raclets

display_name: raclets

visibility

display_name: visibility


maintainer: Achille Capelli

en: lwc snow swe gps liquid-water-content gnss snow-water-equivalent

en: Webcam images

en: Webcam images showing some typical differences in the snow conditions at the four sites (Küblis, Klosters, Laret and Weissfluhjoch) for two time periods (14-18.3.2019 and 27.1-11.2.2020). Both time periods included a precipitation event with partial rain-on–snow occurring at the lower locations.

en: GNSS derived SWE, LWC and HS from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-20

en: Daily observer data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: Snow profiles data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Snow and meteo data from automatic sensors for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Daily observer data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Snow and meteo data from automatic sensors for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Daily data from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Snow and meteo data from automatic sensors from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: GNSS derived data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Snow and meteo data from automatic sensors from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: Snow profiles data from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: Daily data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Daily observer data from automatic sensors from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: GNSS derived SWE, HS, and LWC for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Profile data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Manual profiles

en: Data of the traditional manual profiles for the locations Weissfluhjoch, Klosters and Küblis. For the location of Küblis there are no traditional manual profile data. We provided the data as both PDF and .CAAML format (See https://niviz.org/ or http://caaml.org/Schemas/V5.0/Profiles/SnowProfileIACS/CAAMLv5_SnowProfileIACS.pdf). Moreover, we added LWC and density profiles when available (all locations).

en: Snow profiles data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: Daily data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Daily data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: GNSS derived SWE, LWC and HS from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-20

en: This database contains GNSS derived snow water equivalent (SWE), liquid water content (LWC), and snow height (HS) and reference data collected during the two winter 2018-2020 at 4 sites Weissfluhjoch (2540 m asl, 46°49’47’’ N, 9°48’34’’E), Laret (1515 m asl, . 46°50’2’’N, 9°52’17’’E), Klosters (1200 m asl, 46°51’49’’N, 9°53’17’’E), and Küblis (815 m asl, 46°54’48’’N, 9°46’54’’E).

gnss

display_name: gnss

gps

display_name: gps

liquid-water-content

display_name: liquid-water-content

lwc

display_name: lwc

snow

display_name: snow

snow-water-equivalent

display_name: snow-water-equivalent

en: Snow water equivalent measurements with low-cost GNSS receivers along a steep elevation gradient in the East-ern Swiss Alps


maintainer: Ionut Iosifescu Enescu

en: hpc open-science jupyter-notebooks research-data-management open-data reproducibility open-source

en: Open Science Support @ WSL (Poster)

en:
This poster was originally created for the swissuniversities Open Science Action Plan: Kick-Off Forum, and showed to the audience on 17.10.2019. It illustrates how the environmental data portal EnviDat provides the tools for fostering Open Science and Reproducibility of scientific research at WSL.

Supporting open science is a highly relevant user requirement for EnviDat and for implementing FAIR (Findability, Accessibility, Interoperability and Reusability) principles at dataset level.
EnviDat encourages WSL scientists to complement data publication with a complete description of research methods and the inclusion of the open source software, code or scripts used for processing the dataset or for obtaining the published results. By openly publishing open software (e.g. as Jupyter notebooks) alongside research data sets, researchers can contribute to mitigate reproducibility issues.

EnviDat also promotes and supports, where possible and practical, the publication of software as Jupyter notebooks. Jupyter notebooks provide a solution for improved documentation and interactive execution of open code in a wide range of programming languages (Python, R, Octave/Matlab, Java or Scala). These programming languages are widely used in environmental research at WSL and well supported by the Jupyter-compatible kernels. We have sucessfully interfaced EnviDat-hosted notebooks with the WSL High-Performance Computing (HPC) Linux Cluster through a JupyterHub/JuypterLab beta installation on the HPC cluster implemented in close collaboration with the WSL IT-Services.
For existing software that cannot be easily migrated to Jupyter Notebooks, the Open Science and Reproducibility is assisted by containerisation. We have proven that several Singularity containers can successfully run on WSL's HPC cluster.

Finally, the researchers can upload the data/results complemented by code (e.g. as Jupyter Notebooks, or Singularity containers) and any additional documentation in EnviDat. Consequently, they will receive a DOI for the entire dataset, which they can reference in their science paper in order to publish a more reproducible research.

_License_: This poster is released by WSL and the EnviDat team to the public domain under a Creative Commons 4.0 CC0 "No Rights Reserved" international license. You can reuse this poster in any way you want, for any purposes and without restrictions.

hpc

display_name: hpc

jupyter-notebooks

display_name: jupyter-notebooks

open-data

display_name: open-data

open-science

display_name: open-science

open-source

display_name: open-source

reproducibility

display_name: reproducibility

research-data-management

display_name: research-data-management

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Open Science Support at the Swiss Federal Research Institute WSL. The EnviDat Concept


en: fractional-snow shading longwave-radiation shortwave-radiation forest

en: Sky-view fraction along the cablecar transect

en: Data is used and described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research. DOI:10.1029/2018JD029908.

en: Radiation Data 18.04.2019

en:
Spatiotemporal incoming/outgoing shortwave and longwave radiation as well as sunlit and shaded-snow view fractions below an evergreen forest stand in the Swiss alps. Data was collected on 18th of April 2018 along a 48m long, heterogeneous forest stand under full snow cover conditions.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: Seasonal sub-canopy radiation data

en:
Seasonal, spatially aggregated incoming and outgoing shortwave radiation below an evergreen forest stand collected with a cable car system.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover Control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: Radiation Data 25.4.2018

en:
Spatiotemporal incoming/outgoing shortwave and longwave radiation as well as sunlit and shaded-snow view fractions below an evergreen forest stand in the Swiss alps. Data was collected on 25th of April 2018 along a 48m long, heterogeneous forest stand under partial snow cover conditions.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: This data set consists of incoming and outgoing short- and longwave radiation as well as sunlit-snow-view-fraction as described in the JGR-Atmospheres paper "Shading by trees and fractional snow cover control the sub-canopy radiation budget", by Malle et al. (2019). Data was collected along a 48m long, heterogeneous forest transect between January and June 2018 close to Davos, Switzerland.

forest

display_name: forest

fractional-snow

display_name: fractional-snow

longwave-radiation

display_name: longwave-radiation

shading

display_name: shading

shortwave-radiation

display_name: shortwave-radiation


en: model discharge climate-change-impact hydrology water-temperature

en: Data access

en:
This work presents the first extensive study of climate change impacts on rivers temperature in Switzerland. Results show that even for low emissions scenarios, water temperature increase will lead to adverse effect for both ecosystems and socioeconomic sectors (such as nuclear plant cooling) throughout the 21st century. For high emissions scenarios, the effect will be worsen. This study also shows that water warming in summer will be more important in Alpine regions than in lowlands.
This material is distributed under CC BY 4.0 license (https://creativecommons.org/licenses/by/4.0/legalcode).

climate-change-impact

display_name: climate-change-impact

discharge

display_name: discharge

hydrology

display_name: hydrology

model

display_name: model

water-temperature

display_name: water-temperature

en: Dataset for: Future water temperature of rivers in Switzerland under climate change investigated with physics-based models


en: snow ice arctic sea-salt-aerosol antarctica

en: Fig 1B_1

en: Individual data to mean shown in Figure 1B

en: Fig 1F_2

en: Individual data to mean shown in Figure 1F

en: Fig 1A

en: Data Figure 1A

en: Fib 1B_3

en: Fig 1B

en: Data in Figure 1B

en: This table lists all data files in chronological order. "SampleTemp" refers to the reading of the PT-1000 at the side of the sample holder. "cellPressure" is the water vapour pressure during the measurements. From this, in presence of ice, the temperature of the ice sample can be calculated which is given in the column "iceTemp". "dT" is the difference, or temperature offset, between sensor's reading and the ice samples temperature. The offset is due to the sensor being mounted away from the cooled spot of the sample were it experiences heating from warmer parts of the sample holder. The off-set is used to calibrate the temperature sensor and the resulting temperature during the experiments is given in the column "temperature". "relHum" is the relative humidity above (supercooled) liquid and "concBrine" is the concentration of a NaCl solution in mol/l in equilibrium with ice at the experimental temperature. "Area" is the integrated PE signal.

en: Fig 1F

en: Data to Figure 1F

en: Fig 1C

en: Data to Figure 1C

en: Fig 1F_1

en: Code

en: Matlab code to read and plot the data

en: Fig 1E

en: Data to Figure 1E

en: Table 2

en: This table lists all NEXAFS data files in chronological order with PE carbon to oxygen signal intensity ratios -from which the atomic ratio were calculated in the paper - before ("preCtoO") and after ("postCtoO") each NEXAFS measurement. Also listed is the change in Na ("lossSodi"), O ("lossOxy"), Cl ("lossChlor"), and C ("lossCarb") signal intensity after the NEXAFS measurement compared to prior to the NEXAFS measurement.

en: Fig 1D

en: Data to Figure 1D

en: Fig 1B_2

en: Laboratory experiments are presented on the phase change at the surface of sodium chloride – water mixtures at temperatures between 259 K and 240 K. High selectivity to the upper few nanometres of the frozen solution – air interface is achieved by using electron yield near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. We present the NEXAFS spectrum of the hydrohalite.

en: Data set on interfacial supercooling and the precipitation of hydrohalite in frozen NaCl solutions by X-ray absorption spectroscopy


intratrait

maintainer: Christian Rixen

title_for_slug: intratrait

en: neighbour-interactions climate-change elevation-gradient cold-adapted-plants elevation-range plant-traits

en: Plant trait data along elevation gradients on mountains

en:
This data set was used to test whether species specialized to high elevations or with narrow elevational ranges show more conservative (i.e. less variable) trait responses across their elevational distribution, or in response to neighbours, than species from lower elevations or with wider elevational ranges. We did so by studying intraspecific trait variation of 66 species along 40 elevational gradients in four countries (Switzerland, Australia, New Zealand, China) in both hemispheres. As an indication of potential neighbour interactions that could drive trait variation, we also analysed plant species’ height ratio, its height relative to its nearest neighbour.
The following traits and parameters were measured and are available in this data set:
As an indication of plant stature, we measured vegetative and generative height, where vegetative height was distance from soil to highest vegetative leaf and generative height was distance to the highest point on the reproductive shoot. As a measure of reproductive investment, we noted the presence of flowers on the randomly chosen individuals (see below). As a measure of individual and genet basal area, we measured individual plant and patch diameters, in two dimensions (along the largest diameter and perpendicular to it). In clonal plant species, plant diameter was equivalent to an individual rosette, whereas patch diameter referred to the whole genet and could represent the size of a tuft, tussock or cushion. For genera with more singular growth forms (e.g., some Gentiana species) plant and patch diameter were the same. The two diameter measurements were made at right angles, allowing estimates of patch and plant areas to be calculated as an ellipse (i.e., area = 0.5 a 0.5 b Π). All traits were measured on ten randomly selected individuals per site. Flower count data was considered in a binary fashion on a per individual basis (because for some species individuals only produce one flower when flowering) so that the presence or absence of flower(s) was a nominal value between 0 and 10 for each species at each site. We then collected at least three leaves (up to 30 for small and light leaves) from each of the first three individuals selected from each species for determination of leaf dry matter content (LDMC) and specific leaf area (SLA). For calculations of LDMC and SLA, fresh leaves were scanned on a flatbed scanner to determine leaf area. Leaves were then weighed on a balance to a precision of +/- 0.001g, prior to being air dried and reweighed with a balance to a precision of +/- 0.0001g. LDMC was calculated by dividing dry leaf mass by fresh leaf mass. SLA was calculated by dividing leaf area by dry leaf mass. Additionally, within an area of 10 cm diameter around the target individual, we determined the tallest neighbouring species and measured its vegetative and generative height, and estimated the percent cover of the target species, other vegetation, rock, and bare soil.
For more details see Rixen et al. 2022, Journal of Ecology.

climate-change

display_name: climate-change

cold-adapted-plants

display_name: cold-adapted-plants

elevation-gradient

display_name: elevation-gradient

elevation-range

display_name: elevation-range

neighbour-interactions

display_name: neighbour-interactions

plant-traits

display_name: plant-traits

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: intratrait


en: species-richness-models birds urbanization diversity urban-ecology species-abundance-distributions insects spiders sdms snails arthropods

en: contains the raw data to perform the species richness models of the rare species

en: contains the raw data to perform the species richness models of the hypercommon species

en: contains the raw data to perform the species richness models of all species

en: abundance and occurrence data of the 1446 species studied, used to investigate species-abundance distributions and species-occurrence distributions

en: contains the raw data to perform species distribution models, only for common species

en:
Richness, site occurrence and abundance data of bees, beetles, birds, hoverflies, net-wingeds, true bugs, snails, spiders, milipides, wasps collected in the city of Zurich using different sampling techniques, and the environmental variables for each sampling site.
Data are provided on request to contact person against bilateral agreement.

arthropods

display_name: arthropods

birds

display_name: birds

diversity

display_name: diversity

insects

display_name: insects

sdms

display_name: sdms

snails

display_name: snails

species-abundance-distributions

display_name: species-abundance-distributions

species-richness-models

display_name: species-richness-models

spiders

display_name: spiders

urban-ecology

display_name: urban-ecology

urbanization

display_name: urbanization

en: Ecological properties of urban ecosystems. Biodiversity dataset of Zurich


maintainer: Leo Gallus Bont

en: qgis geoprocessing forest openstreetmap seilaplan accessible-forest

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en: Juypter Notebook for Data Preparation

en: Railways vector data (close to the sample forest range)

en: Juypter Notebook for Data Preparation (online)

en: Power lines vector data (close to the area of the sample forest range)

en: Forest vector data (for sample forest range)

en: Digitised sample perimeter

en: Preview

media_type: image/png

format: PNG

mimetype: image/png

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

forest

display_name: forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019


en: digital-planning swiss-geo-downloader qgis-plugin seilaplan open-source cable-yarding swiss-geodata digital-elevation-model geoinformation-system

en: Herunterladen des DHM mit SwissGeoDownloader

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. The plugin ‘Swiss Geo Downloader’, which is available for the open source geoinformation software QGIS, allows freely available Swiss geodata to be downloaded and displayed directly within QGIS. It was developed in 2021 by Patricia Moll in collaboration with the Swiss Federal Institute for Forest, Snow and Landscape Research WSL. In this tutorial we describe how to download the high accuracy elevation model ‘swissALTI3D’ with the help of the ‘Swiss Geo Downloader’ and how to use it for digital planning of a cable line with the plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to the Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link to Seilaplan website: https://seilaplan.wsl.ch

*********************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Das Plugin Swiss Geo Downloader, welches für das Open Source Geoinformationssystem QGIS zur Verfügung steht, ermöglicht frei verfügbare Schweizer Geodaten direkt innerhalb von QGIS herunterzuladen und anzuzeigen. Es wurde 2021 von Patricia Moll in Zusammenarbeit mit der eidgenössischen Forschungsanstalt Wald, Schnee und Landschaft WSL entwickelt. In diesem Tutorial beschreiben wir, wie man mit Hilfe des Swiss Geo Downloaders das hochgenaue Höhenmodell swissALTI3D herunterladen und für die Seillinienplanung mit dem Plugin Seilaplan verwenden kann.

Link zum Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link zur Seilaplan-Webseite: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

swiss-geo-downloader

display_name: swiss-geo-downloader

swiss-geodata

display_name: swiss-geodata

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Seilaplan Tutorial: DTM download with SwissGeoDownloader


maintainer: Matthias Haeni

en: temperature relative-humidity par wind-speed precipitation swiss-forest-lab long-term meteorology climate-change meteo

en: Data plot of the forest station (ALB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Forest station data (ALB)

en: Site aerial photo (Alpthal)

en: Site aerial photo from the Alpthal forest station. Source: Google. 2016. Site aerial photo from the Alpthal forest station. Retrieved November 11, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for one meteorological station in Alpthal in Switzerland which is located within a natural coniferous forest (ALB) with Norway spruce (_Picea abies_; 180-230 yrs) as dominant tree species. The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Alpthal is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Alpthal, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Frank Techel

en: avalanche-fatalities avalanche-accident-statistics avalanche-statistics long-term-trends avalanche-accident

en: Data avalanche fatalities 1969/1970 - 2014/2015

en: The data comprises avalanche fatality data from the Alpine regions in the seven countries Austria, France, Germany, Italy, Liechtenstein, Slovenia, and Switzerland.

en:
During the last 45 years, about 100 people lost their lives in avalanches in the European Alps each year. Avalanche fatalities in settlements and on transportation corridors have considerably decreased since the 1970s. In contrast, the number of avalanche fatalities during recreational activities away from avalanche-secured terrain doubled between the 1960s and 1980s and has remained relatively stable since, despite a continuing strong increase in winter backcountry recreational activities.

Data complementing Figure 2 in:
_"Avalanche fatalities in the European Alps: long-term trends and statistics"_, by Techel, F., Jarry, F., Kronthaler, G., Mitterer, S., Nairz, P., Pavšek, M., Valt, M., and Darms, G.

Data description:
please refer to section 2 (Data and Methods) in the mentioned publication

avalanche-accident

display_name: avalanche-accident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

avalanche-statistics

display_name: avalanche-statistics

long-term-trends

display_name: long-term-trends

en: Avalanche fatalities in the European Alps (1969/1970 - 2014/2015)


en: population-genetics drosophila-suzukii biological-control multilocus-genotypes switzerland nuclear-microsatellite-markers simple-sequence-repeats trichopria-drosophilae

en: Table comprising all pertinent information for multiplex PCRs of species-specific nuclear microsatellite makers for Trichopria drosophilae, comprising all 21 newly developed markers, details on full sequences with GenBank accession numbers, primer sequences (including labeling and pig-tails), and repeat motives. PCRs with respective annealing temperatures (AnnealingTemp) refer to Type-It Multiplex PCR Kit (Qiagen, Hilden, Germany).

en: Multilocus genotypes (biallelic coding for 21 nuclear microsatellites) of Trichopria drosophilae described in Gugerli et al. Agrarforschung Schweiz 2019. Missing data denoted as '999'. Population codes (PopNo) are the following: 1, Vezia; 3, Contone ; 5, Davesco; 6, Corteglia; 7, Mezzana; 8, Stabio; 9, Gordola; 10, Sementina; 12, Brusata di Novazzano; 14, Monteggio; 16, Giubiasco; 17, ComoBP; 18, VD; 19, Weil_D; 20, Dossenheim; 21, BioPlanet_Como. Coordinates (CoordCH_E, CoordCH_N) refer to the Swiss coordinates system CH1903.

en:
 Nuclear microsatellite markers and genotype data for _Trichopria ddrosophilae_

This data set comprises (i) the characteristics of a set of 21 species-specific nuclear microsatellites for PCR amplification in _Trichopria drosophilae_ (ii) and genotype data for samples collected in southern Switzerland (Canton of Ticino), with few reference samples from Canton of Vaud, southern Germany, and northern Italy (lab-reared population).
Markers were developed by Ecogenics GmbH, Balgach (Switzerland), using MiSeq Nano 2x250 v2 format (on a mix of 10 individuals). Multiplex PCR assays for multilocus genotyping were established by Ecological Genetics (WSL Birmensdorf), and population genetic analyses are found in Gugerli et al., Agrarforschung Schweiz 2019.

biological-control

display_name: biological-control

drosophila-suzukii

display_name: drosophila-suzukii

multilocus-genotypes

display_name: multilocus-genotypes

nuclear-microsatellite-markers

display_name: nuclear-microsatellite-markers

population-genetics

display_name: population-genetics

simple-sequence-repeats

display_name: simple-sequence-repeats

switzerland

display_name: switzerland

trichopria-drosophilae

display_name: trichopria-drosophilae

educ

en: Education, culture and sport

en: Nuclear microsatellite markers for Trichopria drosophilae, parasitoid wasp on Drosophila suzukii


maintainer: Yaquan Chang

en: phytodiversity hengduan-mountains habitat-heterogeneity hypervolume model-residuals

en: Hengduan plant family richness map

en: This is the family level plant richness map in the Hengduan mountain scale at 1km resoution

en: HDM heterogeneity scales

en: The Heterogeneity matrics in the Hengduan mountain scale

en: Plant range map at Hengduan scale

en: This is the plant range map at the Hengduan mountain scale based on species distribution model, elevation, and county level distribution information

en: Eurasia SR and heteorgeneity

en: This table is used for the Eurasia scale analyses, including both family level species richness map and different heterogeneity predictors

en: Eurasia plant family richness map

en: This is the plant family level richness map at the Eurasia scale calculated from https://www.nature.com/articles/s41597-021-00997-6

en: This research data is used to re includes 1 km resolution seed plant species range maps for the Hengduan mountain region (southwest China), elevation information for each species, family-level plant richness data, and habitat heterogeneity data at both Eurasia and Hengduan mountain regions. This research data includes 1 km resolution seed plant species range maps for the Hengduan mountain region (southwest China), elevation information for each species, family-level plant richness data, and habitat heterogeneity data at both Eurasia and Hengduan mountain regions.

habitat-heterogeneity

display_name: habitat-heterogeneity

hengduan-mountains

display_name: hengduan-mountains

hypervolume

display_name: hypervolume

model-residuals

display_name: model-residuals

phytodiversity

display_name: phytodiversity

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Phytodiversity is associated with habitat heterogeneity from Eurasia to Hengduan


en: ecological-indicator-values ecological-maps soil-moisture soil-ph landolt switzerland plants soil-mapping

en: Predictors

en: Predictors generated and used in Descombes et al. (2020)

en: Description

en: Description of the predictors provided in this dataset

en:
Ecologically meaningful predictors are often neglected in plant distribution studies, resulting in incomplete niche quantification and low predictive power of species distribution models (SDMs). Because environmental data are rare and expensive to collect, and because their relationship with local climatic and topographic conditions are complex, mapping them over large geographic extents and at high spatial resolution remains a major challenge. Here, we derived environmental data layers by mapping ecological indicator values (EIVs) in space by using a large set of environmental predictors in Switzerland.

This dataset contains the predictors (raster layers) generated and used in the following publication (Descombes et al. 2020). Only predictors for which we have the rights to share them are provided. Other datasets and predictors can be accessed via the original data provider. Details on the predictors and sources are fully described in the publication. The predictors are provided as GeoTIFF files, at 93 m spatial resolution and Mercator projection ("+proj=merc +lon_0=0 +k=1 +x_0=0 +y_0=0 +ellps=WGS84 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs"). The excel file (xlsx) provides a short description of the raster layers.

Paper Citation:

Descombes, P. et al. (2020). Spatial modelling of ecological indicator values improves predictions of plant distributions in complex landscapes. Ecography. (accepted)

ecological-indicator-values

display_name: ecological-indicator-values

ecological-maps

display_name: ecological-maps

landolt

display_name: landolt

plants

display_name: plants

soil-mapping

display_name: soil-mapping

soil-moisture

display_name: soil-moisture

soil-ph

display_name: soil-ph

educ

en: Education, culture and sport


maintainer: Lisa Hülsmann

en: forest-reserves empirical-mortality-models inventory-data tree-mortality tree-growth

en: Calibration data

en:
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.

 Meta data
Reserve: Name of the forest reserve

Plot: Permanent plot number

 Tree data
Species: Latin species name (or species group, cf. _Quercus_ spp.)

y: Status of the tree with 0 = alive and 1 = dead

dt: Length of the mortality period (years)

DBH: Diameter at breast height (mm) of the second inventory

relBAI: Annual relative basal area increment (-) calculated based on the first and the second DBH measurement as the compound annual growth rate of the trees basal area

 Stand data
_All stand variables were calculated for the second inventory._

mDBH: Mean diameter at breast height (mm)

iqrDBH: Interquartile range of diameter at breast height (mm)

BA: Basal area per hectare (m2 ha-1)

N: Number of trees per hectare (ha-1)

 Climate data
_Both climate variables were calculated for the period between the second and the third inventory._

P: Mean annual precipitation sum (mm)

mT: Mean annual air temperature (°C)

en:
The dataset comprises > 90 000 records from inventories in 54 strict forest reserves in [Switzerland](https://www.wsl.ch/de/wald/biodiversitaet-naturschutz-urwald/naturwaldreservate.html) and [Lower Saxony / Germany](http://naturwaelder.de/) along a considerable environmental gradient. It was used to develop parsimonious, species-specific mortality models for 18 European tree species based on tree size and growth as well as additional covariates on stand structure and climate.

 Inventory data
Measurements had been conducted repeatedly on up to 14 permanent plots per reserve for up to 60 years with re-measurement intervals of 4 - 27 years. The permanent plots vary in size between 0.03 and 3.47 ha. The inventories provide diameter measurements at breast height (DBH) and information on the species and status (alive or dead) of trees with DBH ≥ 4 cm for Switzerland and ≥ 7 cm for Germany.

 Data selection
We excluded three permanent plots where at least 80 % of the trees died during an interval of 10 years, and mortality could be clearly assigned to a disturbance agent. Mortality in the remaining stands was rather low, with a mean annual mortality rate of 1.5 % and strong variation between plots from 0 to 6.5 % (assessed for trees of all species with DBH ≥ 7 cm).
We only used data from permanent plots with at least 20 trees per species to obtain reliable plot-level mortality rates even for species with low mortality rates (about 5 % during 10 years), and selected tree species occurring on at least 10 plots to cover sufficient ecological gradients. This led to a dataset of 197 permanent plots and 18 tree or shrub species: _Abies alba_ Mill., _Acer campestre_ L., _Acer pseudoplatanus_ L., _Alnus incana_ Moench., _Betula pendula_ Roth, _Carpinus betulus_ L., _Cornus mas_ L., _Corylus avellana_ L., _Fagus sylvatica_ L., _Fraxinus excelsior_ L., _Picea abies_ (L.) Karst, _Pinus mugo_ Turra, _Pinus sylvestris_ L., _Quercus pubescens_ Willd., _Quercus_ spp. (_Q. petraea_ Liebl. and _Q. robur_ L.; not properly differentiated in the Swiss inventories), _Sorbus aria_ Crantz, _Tilia cordata_ Mill. and _Ulmus glabra_ Huds..

 Predictors of tree mortality
We considered tree size and growth as key indicators for mortality risk. Radial stem growth between the first and second inventory and DBH at the second inventory were used to predict tree status (alive or dead) at the third inventory. To this end, the annual relative basal area increment (relBAI) was calculated as the compound annual growth rate of the trees basal area. Additional covariates on stand structure and climate comprise mean annual precipitation sum (P), mean annual air temperature (mT), the mean and the interquartile range of DBH (mDBH, iqrDBH), basal area (BA) and the number of trees (N) per hectare.

 Further information
For further information, refer to Hülsmann _et al_. (in press) How to kill a tree – Empirical mortality models for eighteen species and their performance in a dynamic forest model. _Ecological Applications_.

empirical-mortality-models

display_name: empirical-mortality-models

forest-reserves

display_name: forest-reserves

inventory-data

display_name: inventory-data

tree-growth

display_name: tree-growth

tree-mortality

display_name: tree-mortality

en: Calibration data for empirical mortality models of 18 European tree species


en: discharge snowmelt hydrology precipitation soil-moisture climate-change

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of the 307 medium-sized catchments in Switzerland. The "gridcode" provides the ID of the catchment used in the datafiles.

en: Daily simulated data for the future period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the period 1981-2100 in mm for the 307 catchments.

en: Daily simulated data for the reference period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the reference period 1981-2017 in mm.

en:
Daily discharge and the related hydro-meteorological variables precipitation, snowmelt, and soil moisture are provided for current (1981-2017) and for future climate conditions (1981-2100) for 307 medium-sized catchments in Switzerland. The catchments have a median catchment area of 117 km². The 307 catchments together form a set representative of the climatological conditions and runoff characteristics in Switzerland. The four variables were simulated at a daily resolution using the hydrological model PREVAH. PREVAH is a conceptual process-based model that was run in this study in its fully distributed version on a 500 m grid (Viviroli et al. 2009a). For the calibration, runoff time series from 140 mesoscale catchments covering the different runoff regimes were used. The model calibration was conducted over the period 1993-1997. Verification was performed on the period 1983-2005 using (i) volumetric deviation (Viviroli et al. 2007) and (ii) benchmark efficiency (Schäfli et al 2007) as objective functions. The calibration and validation procedures are described in detail in Köplin et al. (2010). The parameters for each model grid cell were derived by regionalizing the parameters obtained for the 140 catchments with a procedure based on ordinary kriging (Viviroli et al. 2009b, Köplin et al. 2010).
The calibrated and validated model was then driven with transient meteorological data (precipitation, temperature, radiation, and wind) representing both reference (1981-2017) and future climate conditions (2018-2099). The data were derived from the CH2018 climate scenarios (NCCS 2018) provided by the Swiss National Centre for Climate Services (NCCS). They were obtained from climate experiments produced with different climate modeling chains, consisting of a global and a regional circulation model each, within EUROCORDEX for three representative concentration pathways (RCP) emission scenarios. Downscaled output of ten climate model chains derived by quantile mapping were considered. The focus was on the chains of the EUR-11 domain with a horizontal resolution of 0.11 degrees (roughly 12.5 km). The climate model chains (GCM, RCM, RCP, and grid resolution) used are listed below:

- ICHEC-EC-EARTH	DMI-HIRHAM5	2.6	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	4.5	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	8.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	2.6	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	4.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	8.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	4.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	8.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	4.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	8.5	EUR-11

*References*:

-	Köplin, N., D. Viviroli, B. Schädler, and R. Weingartner (2010), _How does climate change affect mesoscale catchments in Switzerland? - A framework for a comprehensive assessment_, Advances in Geosciences, 27, 111-119, doi:10.5194/adgeo-27-111-2010.
-	National Centre for Climate Services (2018), CH2018 - _Climate Scenarios for Switzerland_, Tech. rep., NCCS, Zurich.
-	Schäfli, B., and H. V. Gupta (2007), _Do Nash values have value?_, Hydrological Processes, 21, 2075-2080, doi:10.1002/hyp.6825.
-	Viviroli, D., J. Gurtz, and M. Zappa (2007), _The hydrological modelling system PREVAH. Part II - Physical model description_, Geographica Bernensia, 40, 1-89.
-	Viviroli, D., M. Zappa, J. Gurtz, and R. Weingartner (2009a), _An introduction to the hydrological modelling system PREVAH and its pre- and post-processing-tools_, Environmental Modelling & Software, 24, 1209-1222, doi:10.1016/j.envsoft.2009.04.001.
-	Viviroli, D., H. Mittelbach, J. Gurtz, and R. Weingartner (2009b), _Continuous simulation for flood estimation in ungauged mesoscale catchments of Switzerland-Part II: Parameter regionalisation and flood estimation results_, Journal of Hydrology, 377 (1), 208-225, doi:10.1016/j.jhydrol.2009.08.022.

climate-change

display_name: climate-change

discharge

display_name: discharge

hydrology

display_name: hydrology

precipitation

display_name: precipitation

snowmelt

display_name: snowmelt

en: Simulated future discharge and climatological variables for medium-sized catchments in Switzerland


en: intraspecific-variation defense-chemistry fraxinus invasive-species emerald-ash-borer ash-dieback cross-resistance

en: Raw data-Publication cross-resistance in ash-New Phytologist

en:
What are the research data files about: Raw data on perfomance (dry weight, development and mortality) of emerald ash borer larvae used in published bioassays. Raw data on ash dieback leasion lenghts. Raw data on untargeted and targeted specialized ash metabolites.
Which methods were used: Bioassays in greenhouses and climate chambers to collect data on emerald ash borer and ash dieback perfomance. Phytochemical analyses on ash phloem for quantifiying specialized metabolites
When and where was the data created / extracted: Summer 2020-2021

en:
 What are the research data files about: Raw data on perfomance (dry weight, development and mortality) of emerald ash borer larvae used in published bioassays. Raw data on ash dieback leasion lenghts. Raw data on untargeted and targeted specialized ash metabolites.

Which methods were used: Bioassays in greenhouses and climate chambers to collect data on emerald ash borer and ash dieback perfomance. Phytochemical analyses on ash phloem for quantifiying specialized metabolites.

When and where was the data created / extracted: Summer 2020-2021

ash-dieback

display_name: ash-dieback

cross-resistance

display_name: cross-resistance

defense-chemistry

display_name: defense-chemistry

emerald-ash-borer

display_name: emerald-ash-borer

fraxinus

display_name: fraxinus

intraspecific-variation

display_name: intraspecific-variation

invasive-species

display_name: invasive-species

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Raw data-Publication cross-resistance in ash - New Phytologist


tree-ring-laser-ablation-data

maintainer: Paula Ballikaya

title_for_slug: tree-ring-laser-ablation-data

en: laser-ablation dendrochronology dendrochemistry tree-rings air-pollution

en: Laser ablation data

en:
This dataset contains the values of several chemical elements (Mg, Al, Si, S, K, Ca, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Sr, Tl, Pb, Bi) measured in the latewood of tree rings of Mongolian oak from Harbin, China, at a 5-year resolution. Due to the lack of a suitable reference material for wood, absolute concentration was not calculated, and the ratio between the chemical element and 13C was taken as proxy for the element signal.

In Harbin, one of the largest cities and most important industrial centers in northeastern China, air quality monitoring systems were built only by the end of 2015 to meet the national requirements. Thus, dendrochemical analyses could be used as a tool to complement for the lack of air quality data over longer periods of time, allowing for the reconstruction of the temporal trend of trace metals. Our main scopes were to: (a) assess the chemical composition of Quercus mongolica Fisch. ex Ledeb. tree rings from Harbin using a recently developed system of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), (b) identify the main chemical elements which
derived from air pollution and may be used as indicators over the period 1965–2020 in Harbin, while excluding those that were controlled by physiological processes in the tree, and (c) reconstruct the history of pollution in Harbin by comparing the tree-ring chemical composition of recent decades with that of previous decades, in trees growing in the highly polluted city of Harbin and in trees growing in a control site 90 km away from major pollution sources.

Briefly, the temporal trend of some elements was influenced by physiological factors, by environmental factors such as pollution, or influenced by both. Mg, K, Zn, Cu, Ni, Pb, As, Sr and Tl showed changes in pollution levels over time.

air-pollution

display_name: air-pollution

dendrochemistry

display_name: dendrochemistry

dendrochronology

display_name: dendrochronology

laser-ablation

display_name: laser-ablation

tree-rings

display_name: tree-rings

educ

en: Education, culture and sport

en: Tree-ring laser ablation data


maintainer: Joan Casanelles Abella

en: plants urban tartu floral-resources angiospermae zurich antwerp poznan floral-inventories paris

en: Trait values for the sampled plants

en: Floral units, mean number of flowers per floral unit and floral abundance of the different plants counted in quadrats in the study sites in Zurich during the four sampling periods

en: List of plant species sampled in the five cities (Antwerp, Paris, Poznan, Tartu and Zurich) during the different sampling perionds (four for Zurich, three for the other cities) with their frequency (oc1-oc16) within a 100 m radius

en: Data of a survey of flowering plants in 80 sites in five European cities and urban agglomerations (Antwerp, Belgium; greater Paris, France; Poznan, Poland; Tartu, Estonia; and Zurich, Switzerland) sampled between April and July 2018.

angiospermae

display_name: angiospermae

antwerp

display_name: antwerp

floral-inventories

display_name: floral-inventories

floral-resources

display_name: floral-resources

paris

display_name: paris

plants

display_name: plants

poznan

display_name: poznan

tartu

display_name: tartu

urban

display_name: urban

zurich

display_name: zurich

en: Flowering Plants (Angiospermae) in Urban Green Areas in five European Cities


mosaic-snow-on-sea-ice-data

title_for_slug: mosaic-snow-on-sea-ice-data

en: drifting-and-blowing-snow arctic-sea-ice snow-distribution spatial-variability surface-mass-balance

en: SNOWPACK setup for MOSAiC

en:
 The zip file contains both input and output data as well as the model configuration as used in the submitted manuscript "Towards a fully physical representation of snow on Arctic sea ice using a 3D snow-atmosphere model".

The zip file contains 2 main folders:
* SNOWPACK_JGR_ALPHA1
* SNOWPACK_JGR_ALPHA3

In the SNOWPACK_JGR_ALPHA1 (reference "SP_R" simulation) and SNOWPACK_JGR_ALPHA3 (comparison "SP_C" scenario) folders you find the corresponding inputs, outputs and configuration as used in the paper, as well as the settings used - which only differ by the changed "SCHMIDT_DRIFT_FUDGE" value that is found in each SNOWPACK_JGR_ALPHA/setup/io.ini file. The input data is already linked accordingly in each io.ini file.

To reproduce the results, download and compile the source code for the adjusted SNOWPACK model first, which can be obtained from https://gitlabext.wsl.ch/snow-models/snowpack.git under the "snowpack_mosaic" branch. After installing, you can run the provided model setup uploaded here.

en: ALPINE3D setup for MOSAiC

en:
The zip file contains a folder structure that must be kept as it is in order to run the simulation in the current configuration.
The setup contains both input and output data as well as the model configuration as used in the submitted manuscript
"Towards a fully physical representation of snow on Arctic sea ice using a 3D snow-atmosphere model".

The zip file contains 3 main folders:
* base_setup_files
* a3d_jgr_alpha1
* a3d_jgr_alpha3

The "base_setup_files" contains all input files that are necessary to run the reference (R) simulation ("a3d_jgr_alpha1" folder) and the comparison "C" scenario ("a3d_jgr_alpha3") folder. In the a3d_jgr_alpha1 and a3d_jgr_alpha3 folders you find the corresponding outputs as used in the paper, as well as the settings used - which only differ by the changed "SCHMIDT_DRIFT_FUDGE" value that is found in each a3d_jgr_alphax/setup/io.ini file. The input data is already linked accordingly in each io.ini file.

a3d_jgr_alpha1 also contains the detailed snow profiles for each point along the transects.

To reproduce the results, download and compile the source code for the adjusted ALPINE3D model first, which can be obtained from https://gitlabext.wsl.ch/snow-models/alpine3d.git under the "alpine3d_mosaic" branch. After installing, you can run the provided model setup uploaded here.

en:
Data accompanying David Wagners' Dissertation.
Covers model results and various input from ALPINE3D and SNOWPACK adjusted for sea ice during MOSAiC.

arctic-sea-ice

display_name: arctic-sea-ice

drifting-and-blowing-snow

display_name: drifting-and-blowing-snow

snow-distribution

display_name: snow-distribution

spatial-variability

display_name: spatial-variability

surface-mass-balance

display_name: surface-mass-balance

en: MOSAIC Snow on Sea Ice Data


en: phylogenetic-diversity beta-diversity conservation global-change plants zonation migclim land-use-change taxonomic-diversity european-alps functional-diversity species-distribution-models

en: Data Access

en:
This repository contains extensive data for the European Alps:
  - Observations of ~3,500 plant species
  - Climate (1-km), soil (100-m) and land cover predictors (1km); current and future scenarios (28 CMIP6-GCMs, 2 land cover change and 3 dispersal scenarios i.e., unlimited, no and realistic vegetation dispersal)
  - Flora migration rates (categorical) and ecological preferences (continuous indicator values)
  - Regional maps of barriers to migration and water bodies at 100-m resolution
  - Sampling effort, distance to roads and cities predictors at 100-m resolution
  - Present and future abundances over the study region at 1-km resolution (~2,000 species)
  - Present and future multifaceted and uniqueness of the European Alps' Flora at 1-km resolution
  - Present and future conservation recommendations at 1-km resolution (26 current and future strategies)
  - Phylogenetic data and functional traits of ~2,000 plants (raw data and classification trees)
  - All scripts, data and plots used for the analyses, including a singularity container (mini-linux) to run them

beta-diversity

display_name: beta-diversity

conservation

display_name: conservation

european-alps

display_name: european-alps

functional-diversity

display_name: functional-diversity

global-change

display_name: global-change

land-use-change

display_name: land-use-change

migclim

display_name: migclim

phylogenetic-diversity

display_name: phylogenetic-diversity

species-distribution-models

display_name: species-distribution-models

taxonomic-diversity

display_name: taxonomic-diversity

zonation

display_name: zonation

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Present and future multifaceted plant diversity, uniqueness and conservation in the European Alps


maintainer: Robert Pazúr

en: switzerland vegetation-indices sentinel-2 cropland agriculture grassland remote-sensing habitat phenology machine-learning

en: Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.7 (v1.0)

en: !!! Please check out the newer version in this repository !!! Assuming that sealed surfaces have little or no phenological response we calculated a mask of unsealed surfaces based on the 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.7.

en: (current version) Cropland, grassland, and shrubland map of Switzerland (v.1.5)

en: GEE (Google Earth Engine) script (JavaScript) to derived the output map  (v1.0)

en: !!! Please check out the newer version in the repository !!! The code used in Google Earth Engine to derive the cropland, grassland and shrubland map of Switzerland

en: Cropland and grassland map of Switzerland  (v.1.0)

en: !!! Please check out the newer version in this repository !!! (1) cropland; (2) grassland; other LC classes are masked out from the map

en: Cropland, grassland, and shrubland map of Switzerland (v1.0)

en: !!! Please check out the newer version in this repository !!! (1) cropland; (2) grassland; (3) shrubland; other LC classes are masked out from the map

en: (current version) Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.7 (v1.5)

en: (current version) Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.6 (v1.5)

en: Assuming that sealed surfaces have little or no phenological response we calculated a mask of unsealed surfaces based on the 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.6.

en: GEE (Google Earth Engine) script (JavaScript) to derived the output map  (v1.5)

en: The code used in Google Earth Engine to derive the cropland, grassland and shrubland map of Switzerland. Compare to the previous version the newer version includes the shadow masking procedure which might be important in the mountainous areas.

en: Mask of unsealed surfaces of Switzerland based on 3 years Sentinel-2 NDVI 95th percentile threshold value: 0.6  (v1.0)

en:
!!! Please check out the newer version in the repository !!!
Mask of unsealed surfaces of Switzerland based on 3 years (2017-2019) Sentinel-2 NDVI 95th percentile threshold value: 0.6

en: (current version) Cropland and grassland map of Switzerland (v.1.5)

en: We developed a map of cropland and grassland allocation for Switzerland based on several indices dominantly derived from Sentinel-2 satellite imagery captured over multiple growing seasons. The classification model was trained based on parcel-based data derived from landholder reporting. The mapping was conducted on Google Earth Engine platform using random forest classifier. Areas of high vegetation, shrubland, sealed surface and non-vegetated areas were masked out from the country-wide map. The resulting map has high accuracy in lowlands as well as mountainous areas.

agriculture

display_name: agriculture

cropland

display_name: cropland

grassland

display_name: grassland

habitat

display_name: habitat

machine-learning

display_name: machine-learning

phenology

display_name: phenology

remote-sensing

display_name: remote-sensing

switzerland

display_name: switzerland

vegetation-indices

display_name: vegetation-indices

educ

en: Education, culture and sport

en: Cropland and grassland map of Switzerland based on Sentinel-2 data


en: laboratory-study snow-atmosphere-interactions ice atmosphere chemistry

en: Processed data as shown in Figure 4 of publication. X-ray energy in eV in column one, electron count intensity in arb. units in column 2.

en:
The table lists all NEXAFS raw data with the following columns:

* name:						raw file name
* xRayEkinRange_eV: 		Smallest and largest X-ray photon energy in eV
* scientaPassEnergy_eV: 	Pass energy of electron analyzer in eV
* scientaDwellTime_ms: 		Dwell time of electron analyzer in ms
* regionName:				O K-edge for all data
* scientaAcquisitionMode: 	Fixed energy (snapshot) mode
* scientaEkinRange_eV: 		Smallest and largest energy of the kinetic energy window used for detection in this work
* scientaEkinStep_eV		Not defined in fixed energy mode
* scientaLensMode:			Tune table
* scientaRegionIterations: 	Iterations (sweeps)
* scientaSequenceIterations: Iterations (sweeps)
* sampleTemp_dC: 			Temperature as monitored at the sample holder in °C
* cellPressure_mbar: 		Total pressure in measurement cell in mbar
* iceTemp_dC: 				Temperature of ice sample calculated based on vapour pressure (assuming total pressure equals partial pressure of water) in °C
* smplX_mm: 				positon of measurement spot, x dimension in mm
* smplY_mm: 				positon of measurement spot, y dimension in mm
* smplZ_mm: 				positon of measurement spot, z dimension in mm
* sealingTemp:				temperature at base of sample manipulator
* lastModifiedDatestr: 		time and date when data aquisition was finished
* sample: 					sample description

en: Near Ambient Pressure partial Auger-Meitner electron yield X-ray absorption spectra and photon flux data. X-ray energy in eV in column 1, analyzer electron count intensity in arb. units in column 2.

en: Data are compiled that have been used to demonstrate the impact of high water partial pressure on X-ray absorption spectra of ice.

atmosphere

display_name: atmosphere

chemistry

display_name: chemistry

ice

display_name: ice

laboratory-study

display_name: laboratory-study

snow-atmosphere-interactions

display_name: snow-atmosphere-interactions

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: An ice oxygen K-edge NEXAFS spectroscopy data set on gas-phase processing