en: temperature meteo meteorology wind-speed precipitation climate-change relative-humidity par swiss-forest-lab long-term

en: Field station data (VOF)

en: Data plot of the field station (VOF)

en: Data plot of the forest station (VOB)

en: Site photo of the field station (VOF)

en: Site photo of the field stationfrom the side.

en: Site aerial photo (Vordemwald)

en: Site aerial photo from both Vordemwald stations. Source: Google. 2016. Site aerial photo from both Vordemwald stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Site photo of the forest station (VOB)

en: Site photo of the forest station from the side.

en: Forest station data (VOB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Vordemwald in Switzerland where one station is located within a natural mixed forest stand (VOB) with European silver fir (_Abies alba_; 110 yrs) and oak trees (_Quercus sp._; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, VOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Vordemwald is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Vordemwald, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


photogrammetric-drone-data-schurlialp

maintainer: Yves Bühler

title_for_slug: photogrammetric-drone-data-schurlialp

en: uav drone-data wingtra photogrammetry orthophoto dsm

state: active

type: dataset

en: Data Access

en:
- 10 cm DSM
- 10 cm HS
- 3 cm orthophoto
- original RGB images
- Agisoft Metashape Processing Report

All of the products are also available as a cloud optimized geotiff.

format: SERVICE

en: The data was collected on 16.04.2021 and on 28.05.2021 with a Wingtra Gen II and a Sony RX1 II RGB sensor to obtain snow depth and distribution data. Following the data collection, the data was processed with Agisoft Metashape. A 10cm DSM, a 10cm snow depth raster, a 3mm orthophoto and the original drone images are available for download.

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

uav

display_name: uav

wingtra

display_name: wingtra

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Photogrammetric Drone Data Schürlialp


maintainer: Jana von Freyberg

en: endmember-mixing-models uncertainties ecohydrology stable-water-isotopes review plant-water-uptake root-zone

en: Data set of MEE-20-04-264 (CSV)

media_type: text/csv

format: CSV

en: Data set of MEE-20-04-264

media_type: application/pdf

en: The following two tables contain information about the data sources of the values reported in Table 1 and 2 in the paper “Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources” published in the journal ‘Methods in Ecology and Evolution’.

format: PDF

mimetype: application/pdf

en: The following two tables contain information about the data sources of the values reported in Table 1 and 2 in the paper “Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources” published in the journal 'Methods in Ecology and Evolution'.

ecohydrology

display_name: ecohydrology

endmember-mixing-models

display_name: endmember-mixing-models

plant-water-uptake

display_name: plant-water-uptake

review

display_name: review

root-zone

display_name: root-zone

stable-water-isotopes

display_name: stable-water-isotopes

uncertainties

display_name: uncertainties

en: Data set of: Plant and root-zone water isotopes are difficult to measure, explain, and predict: some practical recommendations for determining plant water sources


maintainer: EnviDat Support

en: land-use-simulations spatial-planning digital-zoning-plans land-use-transformations land-use-change

en: Legend simulated maps

en:
Table of Content: 1. General context of the data set "LUSzoning”; 2. Background and aims of the study using the data set LUSzoning; 3. The data set LUSzoning.
1. General context of the data set "LUSzoning".
The data set "LUSzoning" stands for Land-use simulations integrating zoning regulations in Spanish functional urban areas. The data set has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2021. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, digital zoning plans) into quantitative land-change modelling approaches at the urban regional level.
2.	Background and aims of the study using the data set “LUSzoning”.
As part of the CONCUR project, a specific task was to integrate planning spatial policies in land-change modelling. Planning can be implemented in modelling using either hard or gradual restrictions. Different studies have addressed the inclusion of spatial planning policies in land-use change modelling. However, the integration of zoning constraints is generally established as hard or Boolean-based restrictions (e.g., whether urban development is allowed or not), while not accounting for the spatial heterogeneity or gradual characteristics within planning zones (e.g., whether planning regulations allow low, medium or high urban density), though these could improve real patterns simulations in urban areas. We assume Spanish General Zoning plans were suitable to explore the integration of planning into land-change modelling as soft constrains because they define land-use intensities in the buildable zoning areas. In light of the above considerations, the overall aim of the study was to model urban land-use changes using a multi-scenario approach that integrates digitized zoning plans for the Functional Urban Areas (FUAs) of Madrid, Barcelona, Valencia, and Zaragoza. The following specific objectives were addressed: i) to analyse the role of planning by defining three future scenarios that integrate digitized zoning plans and one scenario that assumes almost no planning intervention; ii) to introduce zoning constraints that reflect different degrees of urban densities; iii) to generate a transferable spatially-explicit modelling framework to integrate planning into land-use change simulations.
Four future land-use demands scenarios were defined for the FUAs. Storylines were created considering probable development scenarios related to zoning plans, current Spanish legislation and sustainability goals defined along two axes: a high market-oriented vs. high planning-intervention axis, and an axis of short-term economic growth vs. long-term sustainable growth. The sustainable development scenario (S1) is characterized by low gross floor area (GFA) growth that is limited to areas that are currently under development according to zoning plans. The business-as-usual scenario (S2) is characterized by medium GFA growth in the range of on-going trends. The strong development scenario (S3) is characterized by high GFA growth rates. Growth is restricted to buildable areas without urbanization project designated in zoning plans. The unrestricted development scenario (S4) prioritizes a high degree of market liberalization characterized by high GFA growth that surpasses population demands. S4 follows a rapid economic growth pattern with almost no planning intervention.
3.	 The data set “LUSzoning”.
The dataset includes 16 .asc raster layers providing the simulated land-uses under four defined scenarios for Barcelona, Madrid, Valencia and Zaragoza Functional Urban Areas (FUAs) for 2030. The simulated raster layers were created using CLUMondo simulation framework and have a spatial resolution of 30m. The .asc layers name include the name of the FUA and scenario number. For example, the output from simulating the urban growth for the city of Zaragoza under Scenario 2 is named “Zaragoza_S2.tif”. Furthermore, a .txt file named “Legend.txt” includes the numeric value of the land-use and the category of land-use that represents to interpret the .asc raster layers. The name of the land-use classes is a reclassification of the Urban Atlas 2012 land-use classes within the four Spanish FUAs analyzed.

digital-zoning-plans

display_name: digital-zoning-plans

land-use-change

display_name: land-use-change

land-use-simulations

display_name: land-use-simulations

land-use-transformations

display_name: land-use-transformations

spatial-planning

display_name: spatial-planning

en: LUSzoning: Land-use simulations integrating zoning regulations in Spanish functional urban areas


en: climate-change moss biodiversity functional-taxonomic-groups disturbance endemic liverwort elevational-gradient lichen photobiont madeira-island bryophyte-life-strategy functional-taxonomic-group endemic-species climate-change-impact lichen-growth-form lichen-growthform bryophyte

en: MadCrypto – Bryophyte and macrolichen diversity in laurel forests of Madeira

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science.

format: XLS

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science 30: 1122–1133.

The excel file contains 5 sheets:
1) Plot information
2) Bryophyte data with species specific information, separated per substrate
3) Macrolichen data with species specific information, separated per substrate
4) Bryophyte data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 2 and 4 might therefore differ slightly.
5) Macrolichen data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 3 and 5 might therefore differ slightly.

biodiversity

display_name: biodiversity

bryophyte

display_name: bryophyte

bryophyte-life-strategy

display_name: bryophyte-life-strategy

climate-change

display_name: climate-change

climate-change-impact

display_name: climate-change-impact

disturbance

display_name: disturbance

elevational-gradient

display_name: elevational-gradient

endemic

display_name: endemic

endemic-species

display_name: endemic-species

functional-taxonomic-group

display_name: functional-taxonomic-group

functional-taxonomic-groups

display_name: functional-taxonomic-groups

lichen

display_name: lichen

lichen-growth-form

display_name: lichen-growth-form

lichen-growthform

display_name: lichen-growthform

liverwort

display_name: liverwort

madeira-island

display_name: madeira-island

moss

display_name: moss

photobiont

display_name: photobiont

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Franziska Gerber

en: antarctica aws python consistent cryowrf

en: Scripts to preprocess (and download for some databases) atmospheric weather station data. Furthermore, a list of stations and a map can be created to have an overview.

en:
There are many sources providing atmospheric weather station data for the Antarctic continent. However, variable naming, timestamps and data types are highly variable between the different sources. The published python code intends to make processing of different AWS sources from Antarctica easier. For all datasets that are taken into account variables are renamed in a consistent way. Data from different sources can then be handled in one consistent python dictionary.

The following data sources are taken into account:

* AAD: Australian Antarctic Division (https://data.aad.gov.au/aws)
* ACECRC: Antarctic Climate and Ecosystems Cooperative Research Centre by the Australian Antarctic Division
* AMRC: Antarctic Meteorological Research Center (ftp://amrc.ssec.wisc.edu/pub/aws/q1h/)
* BAS: British Antarctic Survey (ftp://ftp.bas.ac.uk/src/ANTARCTIC_METEOROLOGICAL_DATA/AWS/; https://legacy.bas.ac.uk/met/READER/ANTARCTIC_METEOROLOGICAL_DATA/)
* CLIMANTARTIDE: Antarctic Meteo-Climatological Observatory by the italian National Programme of Antarctic Research (https://www.climantartide.it/dataaccess/index.php?lang=en)
* IMAU: Institute for Marine and Atmospheric research Utrecht (Lazzara et al., 2012), https://www.projects.science.uu.nl/iceclimate/aws/antarctica.ph
* JMA: Japan Meteorological Agency (https://www.data.jma.go.jp/antarctic/datareport/index-e.html)
* NOAA: National Oceanic and Atmospheric Administration (https://gml.noaa.gov/aftp/data/meteorology/in-situ/spo/)
* Other/AWS_PE: Princess Elisabeth (PE), KU Leuven, Prof. N. van Lipzig, personal communication
* Other/DDU_transect: Stations D-17 and D-47 (in transect between Dumont d’Urville and Dome C, Amory, 2020)
* PANGAEA: World Data Center (e.g. König-Langlo, 2012)

Important notes

* Information about data sources is available. Some downloading scripts are included in the provided code. However, users should make sure to comply with the data providers terms and conditions.
* Given changing download options of the differnent institutions the above links may not permanently work and data has to be retrieved by the user of this dataset.
* No quality control is applied in the provided preprocessing software - quality control is up to the user of the datasets. Some dataset are quality controlled by the owner.

Acknowledgements
--------------------------
We thank all the data providers for making the data publicly available or providing them upon request. Full acknowledgements can be found in Gerber et al., submitted.

References
---------------
Amory, C. (2020). “Drifting-snow statistics from multiple-year autonomous measurements in Adélie Land, East
Antarctica”. The Cryosphere, 1713–1725. doi: 10.5194/tc-14-1713-2020

Gerber, F., Sharma, V. and Lehning, M.: CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB, JGR - Atmospheres, submitted.

König-Langlo, G. (2012). “Continuous meteorological observations at Neumayer station (2011-01)”. Alfred Wegener
Institute, Helmholtz Centre for Polar and Marine Research, Bremerhaven, PANGAEA, doi: 10.1594/PANGAEA.
775173

antarctica

display_name: antarctica

aws

display_name: aws

consistent

display_name: consistent

cryowrf

display_name: cryowrf

python

display_name: python

en: Preprocessing Antarctic Weather Station (AWS) data in python


maintainer: James W. Kirchner

en: chloride plynlimon tracer deuterium streamflow precipitation catchment stable-water-isotopes

en: Data Set Documentation

en: This file contains a documentation of the data sets, including references to other helpful documentations.

en: Weekly stable water isotopes

media_type: text/plain

en: Data set of weekly stable water isotope data collected at Carreg Wen (precipitation) and Lower Hafren and Tanllwyth (streamflow).

format: TXT

mimetype: text/plain

en: 7-hourly stable water istopes

en: Data set of 7-hourly stable water isotope data measured at Carreg Wen (precipitation) and Upper Hafren (streamflow).

en: The data base contains timeseries of stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK. One data set contains weekly stable water isotope data from the Lower Hafren and Tanllwyth catchments, and the other data set contains 7-hourly stable water isotope data from Upper Hafren. Both data sets also include chloride concentrations in precipitation and streamflow.

catchment

display_name: catchment

chloride

display_name: chloride

deuterium

display_name: deuterium

plynlimon

display_name: plynlimon

precipitation

display_name: precipitation

stable-water-isotopes

display_name: stable-water-isotopes

streamflow

display_name: streamflow

tracer

display_name: tracer

en: Stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK


maintainer: Matthias Haeni

en: meteo long-term wind-speed temperature relative-humidity par meteorology swiss-forest-lab precipitation climate-change

en: Data plot of the forest station (BAB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Beatenberg)

en: Site aerial photo from both Beatenberg stations. Source: Google. 2016. Site aerial photo from both Beatenberg stations. Retrieved November 11, 2016, from https://www.google.ch/maps

mimetype: image/jpeg

en: Site photo of the field station (BAF)

en: Site photo of the field station from below (viewing upwards the slope).

en: Site photo of the forest station (BAB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Data plot of the field station (BAF)

en: Field station data (BAF)

en: Data file.

mimetype: text/csv

en: Forest station data (BAB)

en:
High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Beatenberg in Switzerland where one station is located within a natural coniferous forest (BAB) with Norway spruce (_Picea abies_; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Beatenberg is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the
Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Beatenberg, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Markus Schlegel

en: metabarcoding spore-dispersal edna air-sampling monitoring

en: Data files and analysis scripts (Version 1)

media_type: application/zip

en: This ZIP archive contains the data and source code necessary to reproduce the analyses for the manuscript "A case study on the application of spore sampling for the monitoring of fungi". Please refer to README.pdf inside the archive for more information.

format: ZIP

mimetype: application/zip

en:
Resources associated with the manuscript *A case study on the application of spore sampling for the monitoring of fungi* (Schlegel et al. 2023, submitted).
Airborne environmental DNA (eDNA) monitoring of fungi was evaluated on a species-rich grassland site. Extensive fruiting body surveys yielded 29 waxcap and clavarioid species, 19 of which were also detectable in air eDNA. The analysis indicates that spores of locally occurring fruiting bodies were detected, in addition to a large diversity of common fungal species, while rare and threatened species were underrepresented in the air.
The contents of the dataset (ZIP archive):
* All analysis scripts in [R-Markdown](https://rmarkdown.rstudio.com) format, including the rendered PDF output with figures and tables (*analysis* directory)
* eDNA sample metadata (*amplicon_meta*) and results of the amplicon clustering (*amplicon_data*) and the source code of the pipeline (*amplicon_pipeline*)
* positions of all fruiting body groups found in the surveys (3838 GPS points) (*surveys*)
* positions of the spore traps, taxonomy of studied grassland fungi and red-list species, and many more resources
Please refer to `README.pdf` inside the archive for a complete description of the file structure and information on how to reproduce the analyses.

air-sampling

display_name: air-sampling

edna

display_name: edna

metabarcoding

display_name: metabarcoding

monitoring

display_name: monitoring

spore-dispersal

display_name: spore-dispersal

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Supporting information for case study on the application of spore sampling for the monitoring of fungi


maintainer: Christian Rixen

en: nitrogen-isotope tree-rings treeline stillberg fertilization dwarf-shrubs

en: Project Description Nutrient Addition Stillberg

media_type: text/html

en: Link to Nutrient Addition project description on the WSL website (in German).

format: HTML

en: Metadata Nutrient Addition Stillberg Experimental Design

media_type: image/png

en: Nutrient addition map of the study area with the investigated plots. Each circle (study block) contains one control plot and two plots that received NPK fertilizer corresponding to 15 (NPK15) or 30 (NPK30) kg N ha-1 a-1. Contour lines specify the elevation (m a.s.l.) in steps of 10 m.

format: PNG

en: Data Nutrient Addition Stillberg

en: This link leads to the figshare repository, which contains all nutrient addition data.

en:
 Background information

The availability of nitrogen (N) and phosphorus (P) is considered to be a major factor limiting growth and productivity in terrestrial ecosystems globally. This project aimed to determine whether the growth stimulation documented in previous short‐term fertilisation trials persisted in a longer‐term study (12 years) in the treeline ecotone, and whether possible negative effects of nutrient addition offset the benefits of any growth stimulation.
Over the course of the 12 study years, NPK fertiliser corresponding to 15 or 30 kg N ha−1 a−1 was added annually to plots containing 30‐year‐old *Larix decidua* or 32‐year-old *Pinus uncinata* individuals with an understorey of mainly ericaceous dwarf shrubs. To quantify growth, annual shoot increments of trees and dwarf shrubs as well as radial growth increments of trees were measured. Nutrient concentrations in the soil were also measured and the foliar nutritional status of trees and dwarf shrubs was assessed.

 Experimental design

Over an elevation gradient of 140 m across the treeline afforestation site Stillberg, 22 locations were chosen that covered the whole range of microenvironmental conditions (*see* Nutrient addition experimental design.png). Half of the blocks included European larch (*L. decidua*) and the other half included mountain pine (*P. uncinata*). Within each block, three plantation quadrats were randomly selected as experimental plots and each plot was assigned to a control (no fertilisation) or to one of two fertiliser dose treatments (15 kg and 30 kg N ha−1 a−1). Treatments were assigned randomly but confined so that the location of fertilised plots within a block was not directly above control plots to avoid nutrient input from drainage. For details about the experiment, *see* Möhl et al (2019).

 Data description

The available datasets contain climate variables (2004-2016), nutrient isotope measurements (2010 & 2016), shrub growth measurements (2004-2016), soil parameter measurements and annual ring and shoot measurements (2004-2016). All data can be found here:
<https://figshare.com/articles/dataset/Twelve_years_of_low_nutrient_input_stimulates_growth_of_trees_and_dwarf_shrubs_in_the_treeline_ecotone/7025858>

dwarf-shrubs

display_name: dwarf-shrubs

fertilization

display_name: fertilization

nitrogen-isotope

display_name: nitrogen-isotope

stillberg

display_name: stillberg

tree-rings

display_name: tree-rings

treeline

display_name: treeline

en: Nutrient addition experiment at the Alpine treeline site Stillberg, Switzerland


maintainer: Anita C Risch

en: microbial-biomass-carbon climate anthropogenic-management nutrient-addition soil-properties microbial-respiration herbivore-exclusion

en: Risch et al. GEB_data.xlsx

en:
Study sites and experimental design
We collected data from 23 sites that are part of the Nutrient Network Global Research Cooperative (NutNet, https://nutnet.umn.edu/). The mean annual air temperature (MAT) across these sites ranged from -4 to 22°C, mean annual precipitation (MAP) from 252 to 1592 mm, and elevations from 6 to 4261 m above sea level (Fig 1a, Supplementary Table S1), hence cover a wide range of climatic conditions under which grasslands occur (Fig 1b). Soil organic C concentrations ranged between 0.8 to 7.8%, soil total N concentrations between 0.1 and 0.6%, and the soil C:N ratio between 9.1 and 21.5. Soil clay content spanned from 3.0 to 35%, and soil pH from 3.4 to 7.6 (Supplementary Table S2).
At each site, the effects of nutrient addition and herbivore exclusion were tested via a randomized-block design (Borer et al., 2014). Three blocks with 10 treatment plots each were established at each site, except for the site at bldr.us (only two blocks). Each of these 10 plots was randomly assigned to a nutrient or fencing treatment. An individual plot was 5 x 5 m, divided into four 2.5 x 2.5 m subplots. Each subplot was further divided into four 1 x 1 m square sampling plots, one of which was set aside for soil sampling (Borer et al., 2014). Plots were separated by at least 1 m wide walkways. We collected soil samples from four different treatments for this study: (i) untreated control plots (Control), (ii) herbivore exclusion plots (Fence), (iii) plots fertilized with N, P, K, plus nine essential macro and micronutrients (NPK), and (iv) plots with simultaneous fertilizer addition and herbivore exclusion (NPK+Fence). The experiments were established at different times in the past, with years of treatment different among sites (2 – 9 years since start of treatment; Supplementary Table S1). For the nutrient additions, all sites applied 10 g N m-2 each year as time-release urea; 10 g P m-2 yr-1 as triple-super phosphate; 10 g K m-2 yr-1 as potassium sulfate. A micro-nutrient mix (Fe, S, Mg, Mn, Cu, Zn, B, Mo, Ca) was applied at 100 g m-2 together with K in the first year of treatments but not thereafter.
We excluded large vertebrate herbivores (Fence) by fencing two plots, one with and one without NPK additions, within each block. The fences excluded all aboveground mammalian herbivores with a body mass of over 50 g (Borer et al., 2014). At most sites, the fences were 180 cm high, and the fence contained a wire mesh (1 cm holes) for the bottom 90 cm with a 30 cm outward-facing flange stapled to the ground to exclude burrowing animals. Climbing and subterranean animals may potentially still access these plots (Borer et al., 2014). For slight modifications in fence design at a few sites see Supplementary Table S3. Most sites only had wild herbivores, although four sites were also grazed by domestic animals (Supplementary Table S1).

Collection of soil samples, soil microbial respiration, microbial biomass, and other soil properties
Each of the 23 sites received a package containing identical material from the Swiss Federal Institute for Forest, Snow and Landscape Research WSL, Switzerland to be used for sampling (Risch et al., 2015; Risch et al., 2019). We collected two soil cores of 5 cm diameter and 12 cm depth in each sampling plot and composited them to measure MR, MBC, and soil chemical properties (see below). An additional sample (5 x 12 cm) was collected to assess soil physical properties. This sample remained within a steel sampling core after collection and both ends were tightly closed with plastic caps to avoid disturbance. All soils were shipped cooled to the laboratory at (Location will be disclosed after manuscript acceptance) within a few days after collection. Soils were sampled roughly 6 weeks prior to peak biomass at each site during 2015 and 2016.
To assess MR (CO2 production) in a laboratory incubation experiment we weighed duplicate soil samples (8 g dry soil equivalent) into 50-ml Falcon tubes. No additional substrate (glucose, sugar) was added to these samples. We adjusted the soil moisture of each sample to 60% field capacity. We then placed a 15 ml plastic test tube (Semadeni 1701A) containing 7.25 ml 0.05 M NaOH over each soil sample. The test tube was fixed with a plastic rod so that it was not in contact with the soil sample. The Falcon tubes were then sealed with a screw cap and placed in an incubator under completely dark conditions at 20°C. The CO2 produced by microbial respiration was absorbed by the 0.05 M NaOH. For five weeks we measured the decrease in conductivity within the 0.05 M NaOH solution on a weekly basis with a Multimeter WTW Multi 3410 (WTW GmbH, Germany) and replaced the 0.05 M NaOH with fresh solution. We included Falcon tubes without soil samples in each incubation run as blanks to test if tubes were tight and no CO2 could enter or escape. We calibrated the relationship between conductivity reduction and NaOH absorbed as follows: 400 ml 0.05 M NaOH was placed in a beaker and its conductivity was measured with the multimeter. While stirring, air containing CO2 was blown into the solution for approximately one minute, which reacts with NaOH to form Na2CO3. After this process, conductivity was measured again. We then transferred 7.25 ml of the solution into a smaller beaker and added 1 ml of 0.1 M BaCl2 to precipitate Na2CO3 and then titrated the solution with 0.05 M HCl to determine the remaining NaOH. We then repeated these steps with the remaining solution a total of nine times and plotted the conductivities (y-axis) against the NaOH consumed (x-axis, Supplementary Fig S1). This regression line was used to infer the consumption of NaOH from the conductivity reduction in the incubation experiments and to calculate CO2 evolution during incubation. In addition, we determined the optimum concentration for the NaOH solution in series of preliminary experiments, so that the concentration was not too high to become insensitive, but also not too low so that not all NaOH reacts during incubation. We then calculated MR (mg CO2-C kg dry soil-1 h-1) as total amount of CO2 released over the 5 weeks divided by the duration of the entire incubation in hrs.
Soil microbial biomass carbon (MBC; mg C kg soil-1 ) was measured at the beginning of the experiment by measuring the maximal respiratory response to the addition of glucose solution (4 mg glucose per g soil dry weight dissolved in distilled water; substrate-induced respiration method) on approximately 5.5 g of soil (J. P. E. Anderson & Domsch, 1978; Nico Eisenhauer et al., 2018; Scheu, 1992). For this purpose we used an O2-micro-compensation apparatus (Scheu, 1992). More specifically, substrate-induced respiration was calculated from the respiratory response to D-glucose for 10 hr at 20°C. Glucose was added according to preliminary studies to saturate the catabolic enzymes of microorganisms (4 mg g soil-1 dissolved in 400 ml deionized water). The mean of the lowest three readings within the first 10 hrs (between the initial peak caused by disturbing the soil and the peak caused by microbial growth) was taken as maximum initial respiratory response (MIRR; ml O2 kg soil-1 h-1) and microbial biomass (mg C kg soil-1) was calculated as 38 x MIRR (Beck et al., 1997; Cesarz et al., 2022; Thakur et al., 2015).
The rest of the composited sample was dried at 65°C for 48 h, ground and sieved (2 mm mesh) to assess the soil pH, mineral soil total C and N and C:N ratio, and mineral soil organic C (Risch et al., 2019). The undisturbed sample was used to assess water holding capacity (WHC), bulk density (BD), and soil texture [sand, silt, clay; methods in (Risch et al., 2019)]. We used the percentage of sand and clay as an indicator of soil texture in this study. MAT (°C), MAP (mm) and temperature of the wettest quarter (°C) were obtained from www.worldclim.com (Fick & Hijmans, 2017; Hijmans, Cameron, Parra, Jones, & Jarvis, 2005). These variables were selected as they were found to be drivers of soil nutrient processes across these sites in earlier studies (Risch et al., 2020; Risch et al., 2019). Mean annual soil temperatures (MAST; °C) for the 0 to 5 cm soil layer were obtained for each site from the SoilTemp maps (J. Lembrechts et al., 2021; J. J. Lembrechts et al., 2022), global gridded modelled products of soil bioclimatic variables for the 1979-2013 period at a 1-km² resolution, based on CHELSA, ERA5 and in-situ soil temperature measurements.
Numerical calculations and statistical analyses
We calculated MMQ as MR/MBC. We corrected this measure using the average soil temperature of each site (MMQsoil). This temperature correction is necessary as incubation temperatures are usually much higher than site mean annual soil temperatures (see Xu et al. 2017). MMQsoil = MMQ x Q10(MAST – 20)/10, where Q10 was assumed to be 2 (Xu et al. 2017). See Supplementary Fig S2 for comparison of air and soil temperatures across the 23 sites as well as the incubation temperature.
Some of the explanatory variables (clay, soil organic C, C:N ratio) were skewed and were thus log-transformed prior to analyses. All continuous explanatory variables were centred and scaled to have a mean of zero and variance of one. To avoid collinearity between them we filtered them using correlation analysis (Supplementary Fig S3). From the variables that were strongly correlated (Pearson’s |r| > 0.70) (Dormann et al., 2013), we selected the ones that allowed us to minimize the number of variables (Supplementary Fig S3). Specifically, soil total N concentration, soil total C concentration, soil sand content and soil bulk density were dropped from the dataset. We then assessed how these edaphoclimatic variables are related to MMQ across our global grasslands.
For this, we used linear mixed effects models (LMMs) fitted by maximum likelihood with the lme function in the nlme package (version 3.1-153) (Pinheiro, Bates, DebRoy, & Sarkar, 2021) in R version 3.6.3. (R Core Team, 2019). We used treatment as a fixed effect and plot nested in site as random effects to assess treatment differences in MMQsoil, as well as MR, and MBC. The number of years since the treatment started was included as a fixed effect in all the initial models but was not significant and therefore not retained in the models. To assess how differences in MMQsoil were affected by environmental factors (soil, climatic properties) we again used LMMs. Soil and climatic properties were included as fixed effects and plot nested in site as random effects. We did not include interactions between environmental variables. We then used the MuMin package (Barton, 2018) (version 1.42.1) to select the best models that explained the most variation based on Akaike’s information criterion (AIC; model.avg function). We used the corrected AIC (AICc) to account for our small sample size and selected the top models that fell within 4 AICc units (delta AICc < 4) (Burnham & Anderson, 2002; Johnson & Omland, 2004). We present all our top models rather than model averages. Conditional averages are provided in the Supplementary material.
Based on findings from analyses described above and the literature, we developed a conceptual model of direct and indirect relationships between both edaphoclimatic variables and experimental treatments (Supplement Figure S4) to obtain a more holistic approach in understanding how these properties affect MMQsoil. We had data from 23 sites with 272 observations. We tested this model using structural equation modelling based on a d-sep approach (Lefcheck, 2016; Shipley, 2009). We considered those environmental drivers that were included in our top LMMs, namely temperature of the wettest quarter (T.q.wet), soil pH, water holding capacity (WHC) and soil organic C (organic C; Supplementary Figure S4). These factors were allowed to directly affect MMQsoil, and via their interactions with treatments. In addition, treatments were allowed to directly affect MMQsoil. Treatments were included as dummy variables in the model. We tested our conceptual model (Supplementary Fig S4) using the piecewiseSEM package (version 2.0.2; Lefcheck, 2016) in R 3.4.0, in which a structured set of linear models are fitted individually. This approach allowed us to account for the nested experimental design, and overcome some of the limitations of standard structural equation models, such as small sample sizes (Lefcheck, 2016; Shipley, 2009). We used the lme function of the nlme package to model response variables, including site as a random factor. Good fit of the SEM was assumed when Fisher’s C values were non-significant (p > 0.05). For all significant interactions between soil or climate variables and treatments detected in the SEMs, we calculated treatment effect sizes, i.e., the differences in MMQsoil between Control and treatments as log response ratios (LRR) and plotted these values against the climate or soil factors. The LRR were defined as log(Control/Treatment), where treatment was either Fence, NPK or NPK+Fence. To assess which of the LRR-climate or soil property relationships were significant we again used LMMs, in which soil and climatic properties were included as fixed effects and plot nested in site as random effects.

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch Anita C., Zimmermann, Stefan, Schütz, Martin, Borer, Elizabeth T., Broadbent, Arthur A.D., Caldeira, Maria C., Davies, Kendi F., Eisenhauer, Nico, Eskelinen, Anu, Fay, Philip A., Hagedorn, Frank, Knops, Johannes M.H., Lembrechts, Jonas, J., MacDougall, Andrew S., McCulley, Rebecca L., Melbourne, Brett A., Moore, Joslin L., Power, Sally A., Seabloom, Eric W., Silveira, Maria L., Virtanen, Risto, Yahdjian, Laura, Ochoa-Hueso, Raul (accepted). Drivers of the microbial metabolic quotient across global grasslands. Global Ecology and Biogeography

Please cite this paper together with the citation for the datafile.

The microbial metabolic quotient (MMQ; mg CO2-C mg MBC-1 h-1), defined as the amount of microbial CO2 respired (MR; mg CO2-C kg soil-1 h-1) per unit of microbial biomass C (MBC; mg C kg soil-1), is a key parameter for understanding the microbial regulation of the carbon (C) cycle, including soil C sequestration. Here, we experimentally tested hypotheses about the individual and interactive effects of multiple nutrient addition (NPK+micronutrients) and herbivore exclusion on MR, MBC, and MMQ across 23 sites (5 continents). Our sites encompassed a wide range of edaphoclimatic conditions, thus we assessed which edaphoclimatic variables affected MMQ the most and how they interacted with our treatments. Soils were collected in plots with established experimental treatments. MR was assessed in a five-week laboratory incubation without glucose addition, MBC via substrate-induced respiration. MMQ was calculated as MR/MBC and corrected for soil temperatures (MMQsoil). Using LMMs and SEMs, we analysed how edaphoclimatic characteristics and treatments interactively affected MMQsoil. MMQsoil was higher in locations with higher mean annual temperature, lower water holding capacity, and soil organic C concentration, but did not respond to our treatments across sites as neither MR nor MBC changed. We attributed this relative homeostasis to our treatments to the modulating influence of edaphoclimatic variables. For example, herbivore exclusion, regardless of fertilization, led to greater MMQsoil only at sites with lower soil organic C (<1.7%). Our results pinpoint the main variables related to MMQsoil across grasslands and emphasize the importance of the local edaphoclimatic conditions in controlling the response of the C cycle to anthropogenic stressors. By testing hypotheses about MMQsoil across global edaphoclimatic gradients, this work also helps to align the conflicting results of prior studies.

anthropogenic-management

display_name: anthropogenic-management

climate

display_name: climate

herbivore-exclusion

display_name: herbivore-exclusion

microbial-biomass-carbon

display_name: microbial-biomass-carbon

microbial-respiration

display_name: microbial-respiration

nutrient-addition

display_name: nutrient-addition

soil-properties

display_name: soil-properties


en: avalanches davos dischma snow-depth-distribution snow-hydrology photogrammetry

en: Snowdepth maps

format: GeoTIFF

en:
The available datasets are snow depth maps with a spatial resolution of 0.5 m derived from images of the survey camera Vexcel Ultracam mounted on a piloted airplane. Image acquisition was carried out during the approximately peak of winter (time when the thickest snowpack is expected) in spring. The snow depth maps are calculated by the subtraction of a summer-DTM from the processed winter- DSM of the corresponding date. The summer-DTM used was derived from a point cloud of an airborne laser scanner from 2020.

Due to the occurrence of inaccuracies of the calculated snow depth values caused by the photogrammetric method, we applied different masks to significantly increase the reliability of the snow depth maps. We masked out settled areas, high-frequented streets and technical constructions, pixels with high vegetation (height > 0.5 m) , outliers and unrealistic snow depth values. In addition, we modified the snow depth values of snow-free pixels to 0.
The information on buildings and infrastructure comes from the exactly classified ALS point cloud and the TLM dataset from Swisstopo (https://www.swisstopo.admin.ch/de/geodata/landscape/tlm3d.html#links). High vegetation is also derived from the classification and the calculated object height from the point cloud.
Outliers and unrealistic snow depth values are defined as negative snow depth values and snow depths exceeding 10 m. The classification of each pixel of the corresponding orthophoto into snow-covered or snow-free is based on the application of a threshold of the NDSI or manually determined ratios of the RGB values.

An extensive accuracy assessment proves the high accuracy of the snow depth maps with a root mean square error of 0.25 m for the year 2017 and 0.15 m for the following snow depth maps.

The work is published in:

avalanches

display_name: avalanches

davos

display_name: davos

dischma

display_name: dischma

photogrammetry

display_name: photogrammetry

snow-depth-distribution

display_name: snow-depth-distribution

snow-hydrology

display_name: snow-hydrology

educ

en: Education, culture and sport

en: Snow depth mapping by airplane photogrammetry (2017 -  ongoing)


maintainer: Stephanie Mayer

en: snow-profiles rutschblock failure-layer snowpack-simulation snow-stratigraphy snow-instability snowpack

en: Simulated snow profiles

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en: ReadMe

en: ReadMe file explaining data structure and content

en: Observed snow profiles

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en: DAV data set: Properties of observed snow profiles and simulated failure layers

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-instability

display_name: snow-instability

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack

display_name: snowpack

snowpack-simulation

display_name: snowpack-simulation

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Observed and simulated snow profile data


en: snow hazard-mapping hazard-indication-mapping ramms release avalanche

en: Potential Release  Area  NHESS

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en: RAMMS simulations NHESS

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

hazard-mapping

display_name: hazard-mapping

ramms

display_name: ramms

release

display_name: release

snow

display_name: snow

educ

en: Education, culture and sport

en: Automated Avalanche Release Area (PRA) Delineation Davos


en: albedo mountain snow reflection irradiance energy photovoltaic

en: PV Data

en: Windows users use the 7-zip app to extract the zip-file.

en:
 Overview
The SUNWELL Modelling Environment is a combination of data and code that models electricity production from satellite-derived irradiance data and other spatial data sets for all of Switzerland. This ensemble accompanies the publication "The bright side of PV production in snow-covered mountains", published in the Proceedings of the National Academy of Science and reproduces all results and figures of. Code and resources are in their original form (with documentation). A new version with a more generalized application to PV modelling and with more flexibility in terms of input and output formats will be released in the coming months.

 Format
All code is written and has to be executed in Matlab. The input and output data sets are also in the Matlab-specific .mat format. Whenever publicly available, the original data is provided as geotif, .xlsx or other common format.
This is the case for:

- Digital Elevation Model (InputsFromMatlab/MSG/OriginalData/ASTERDEM),
- Landsurface cover type (InputsFromMatlab/MSG/OriginalData/CORINE),
- Population Density (InputsFromMatlab/MSG/OriginalData/popdensRaster,
- Electricity production from three of our validation sites (/Validation/WSL),
- Measured irradiance for two validation sites (/Validation/ASRB)
The ‘Metadata’ documents in the respective folders provide further information about the data sources and processing. Figures are produced either in .pdf or .png format.

 Structure
The central level of the SUNWELL environment holds the 5 Mains, which run the different modelling aspects of the paper; each code is documented separately. Additional code is located in the ‘DataProcessing’ and the ‘functions’ folder. Functions are called in the different Mains.

‘InputsFromMatlab’ contains the radiation and albedo input data sets in separate subfolders (SIS/SISDIR/ALB). The original data is not publicly available, but can be requested for research purposes free of charge. We provide a processed subset of the data set that was used to run the SUNWELL simulations. The MSG subfolder contains additional spatial input data sets.

‘Outputs’ contains the output files from the different mains (matching names, Main_CHallpixels.m  Prod_CHallpixels)

‘Publication_figures’ contains all individual figures from the PNAS publication, as well as the generating code (/code_plot) and the power point figures (/ppts) that provide the combined final figures.

‘Validation’ contains the data sets used in the model validation:

- Electricity production from three of our validation sites (/WSL),
- Measured irradiance for two validation sites (/ASRB)

Electricity production from a validation site at Lac des Toules in Wallis (/LDT), this data set was provided under an NDA and cannot be made publicly available.

Paper Citation:
 > _Annelen Kahl; Jérôme Dujardin; Michael Lehning (2018). Dataset on PV Production in Snow Covered Mountains. PNAS - Proceedings of the National Academy of Sciences. (in press)_

albedo

display_name: albedo

energy

display_name: energy

irradiance

display_name: irradiance

mountain

display_name: mountain

photovoltaic

display_name: photovoltaic

reflection

display_name: reflection


en: precipitation climate-change meteorology swiss-forest-lab relative-humidity temperature par wind-speed long-term meteo

en: Site photo of the field station (VSF)

en: Site photo of the field station from the side.

en: Site aerial photo (Visp)

en: Site aerial photo from both Visp stations. Source: Google. 2016. Site aerial photo from both Visp stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (VSB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the field station (VSF)

en: Field station data (VSF)

en: Data file.

en: Site photo of the forest station (VSB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Forest station data (VSB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Visp in Switzerland where one station is located within a natural mixed forest stand (VSB) with Scots pine (_Pinus sylvestris_; 40-80 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, VSF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Visp is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Visp, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Virginie Marques

en: fjord fish environmental-dna dna-metabarcoding marine biodiversity plankton

en: Metabarcoding data

en: Raw metabarcoding data for both primers (teleo and 18S) and corresponding file to perform the demultiplexing and primer trimming

en: Code, data and figures

en: Here there are all the data and code to reproduce the figures and analysis presented in the paper, with a README.md file

en:
This dataset contains the raw environmental DNA data associated with the publication *Environmental drivers of eukaryotic plankton and fish biodiversity in an Arctic fjord* in the journal Polar Biology (2023).

 Methods

**Sampling**
We sampled the Lilliehöök fjord on the west coast of Spitsbergen (Svalbard, Norway) over 3 days from 3 to 5 of August 2021. Samples were taken from the glacier front up to the fjord mouth of the Krossfjorden system, around 30 km long, after the Lilliehöök fjord merged with the mouth of Möller fjord. The fjord’s maximum depth has been recorded at 373 m (Svendsen et al. 2002) and has no sill at its entrance, thereby facilitating water exchange with the open ocean of the West Spitsbergen Current. We used a research vessel to sample 5 sites for a total of 15 samples, sampling 3 depths per site (3-m, chlorophyll a maximum and 85-m, unless sea floor was shallower). Shallow and intermediate samples between 3-m and 12-m represent ~35-L of water filtered in-situ using long tubing and a peristaltic pump, and all other deeper samples were taken from a total of 3 Niskin bottles (General Oceanics), representing 22-L of water sampled per sample. Water was filtered through a VigiDNA filtration capsule (SPYGEN) with a 0.20-µm pore size using an Athena peristaltic pump (Proactive Environmental Products, Bradenton, Florida) with a flow rate of ~1-L/min. Each sample was handled with single use tubing and gloves.

**Molecular**
To perform the amplification, we used two sets of primers: teleo (forward: ACACCGCCCGTCACTCT, reverse: CTTCCGGTACACTTACCATG; Valentini et al. 2016) and the universal eukaryotic 1389F/1510R primer pair, amplifying the V9-18S rDNA gene (Amaral-Zettler et al. 2009) (forward: TTGTACACACCGCCC, reverse: CCTTCYGCAGGTTCACCTAC).

 Data content:

+ Metabarcoding data: This zip file contains the 2 sequencing libraries filtered to only retain the samples used in the present study.
+ Code, data and figure: This zip file contains all data and code to reproduce the figures and the analysis in the study, with an associated README explaining the content of each folder.

 Additional informations
For more details, please see the Methods in the associated publication: DOI: 10.1007/s00300-023-03187-9.

biodiversity

display_name: biodiversity

dna-metabarcoding

display_name: dna-metabarcoding

environmental-dna

display_name: environmental-dna

fish

display_name: fish

fjord

display_name: fjord

marine

display_name: marine

plankton

display_name: plankton

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data: Environmental drivers of eukaryotic plankton and fish biodiversity in an Arctic fjord


en: surface-mass-balance blowing-snow cryowrf antarctica reproducibility

en: Static input data from the WRF simulations (used in the python scripts in Scripts_Reproducibility).

en: Namelist and input files and information to run the WRF and CRYOWRF simulations used in the paper.

en: Processed CRYOWRF output used for the analysis and the figures in the paper.

en: Python scripts to reproduces figures in Gerber et al., 2022, submitted.

en: Python scripts to reproduces figures in Gerber et al., 2022, revised

mimetype: application/x-zip-compressed

en: Processed WRF output (run with Noah-MP land surface model) used for the analysis and the figures in the paper.

en:
This dataset contains data and scripts for "CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB" (Gerber et al., submitted).

* Simulation_setup: Namelists and input information to run the simulation. Some input files need to be downloaded from Sharma et a., 2021.
* Static_input: Static topography input file of WRF (geo_em.d01).
* WRF_27km_NoahMP: Preprocessed WRF output of the simulation run with the WRF using the surface parameterization Noah-MP to reproduce the figures and results in the paper.
* WRF_27km_CRYOWRF: Preprocessed WRF output of the simulation run with CRYOWRF to reproduce the figures and results in the paper.
* Scripts_Reproducibility: Python scripts to reproduce the figures and results in the paper.

Note:

* To run some of the scripts Atmospheric Weather station data needs to be prepared using Gerber and Lehning, 2022.
* AWS data is not provided and needs to be downloaded from the corresponding databases. Please make sure to comply with the respective terms and conditions.

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

cryowrf

display_name: cryowrf

reproducibility

display_name: reproducibility

surface-mass-balance

display_name: surface-mass-balance

en: Reproducibility dataset for CRYOWRF validation


maintainer: Christoph Marty

en: snow snowfall climate-change-impacts hydrology water-cycle

en: DORA Persistent URL

en: Synthesis report chapter

en:
This report was prepared as one of the synthesis report chapters of the Hydro-CH2018 project of the Federal Office for the Environment (FOEN). An important feature of snow cover is the fact that its volume and duration is subject to large year-to-year fluctuations. As frozen precipitation, snow cover is nothing other than a natural water reservoir that delays precipitation to runoff and is thus of outstanding importance for the seasonal water balance in Switzerland. Over a whole year, approximately 40% (22 km3) of the annual runoff currently comes from snow melting and only 1% from glacier melting. Typically, the snow cover in the Alpine region builds up over the autumn and winter months, reaches its maximum between February and May, depending on the altitude, and dominates the runoff processes during melting in the following spring and summer months.
Due to the great dependence on minus temperatures and precipitation, the snow cover reacts sensitively to temperatures above 0° Celsius and more or less precipitation. Due to climate change and the associated warming, the proportion of precipitation that falls as snow decreases measurably. In addition to this reduction in snowfall, the warmer temperatures also cause the snow cover to melt more quickly. The decline in snowfall has so far mainly affected lower altitudes, where winter temperatures often reach positive levels.
As climate change progresses, this trend is likely to continue and above all affect higher zones. Even at higher altitudes, the snow cover will then start later, melt away earlier and is increasingly no longer permanently present. This development will also have an effect on the water bodies. Today nival regimes, i.e. regimes shaped by snow, are shifting towards pluvial regimes, i.e. regimes dominated by rain. Overall, winter runoff increases, summer runoff decreases. By the end of the century, the proportion of runoff from snowmelt will decrease throughout Switzerland, albeit to a lesser extent than the proportion from glacier melt.

climate-change-impacts

display_name: climate-change-impacts

hydrology

display_name: hydrology

snow

display_name: snow

snowfall

display_name: snowfall

water-cycle

display_name: water-cycle

en: Snow and the water cycle in a changing climate


maintainer: Tessa Hegetschweiler

en: forest childhood teenagers adolescents recreational-activities

en: Dataset survey at schools

en: The dataset of the questionnaire survey at schools in excel format.

en: Survey at schools 2017

en: The dataset of the questionnaire survey at schools in SPSS-format.

en: Questionnaire school survey

en: The questionnaire used in the survey at 8 schools aimed at teenagers in German.

en: Dataset comments

en: The codebook to the dataset

en: The data results from a questionnaire survey conducted at 8 schools in the cantons Zurich, Aargau and St. Gallen. Respondents aged 13-22 years. The aim of the survey was to gain insight into teenagers' relationship to the forest, reasons for visiting or not visiting the forest and activities in the forest.

adolescents

display_name: adolescents

childhood

display_name: childhood

forest

display_name: forest

recreational-activities

display_name: recreational-activities

teenagers

display_name: teenagers

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Factors influencing teenagers' forest visit frequency


en: sense-of-place place-attachment electrodermal-activity landscape urban-ecology

en: 01. EDA Processed Data

en: 04. Scripts

en: 02. Questionnaire Data

en: 00. EDA Raw Data

en: 05. Visuals

en: 03. Publication Ready Data

en: This repository contains data on EDA measurements of visitors with different cultural backgrounds in virtual urban park settings. The parks are a Persian garden (Shiraz, Iran) and a historical park in Zurich, Switzerland. The cultural background of the visitors is Persian and Central European. The repository contains raw data from EDA, processed time series and statistical procedures.

electrodermal-activity

display_name: electrodermal-activity

landscape

display_name: landscape

place-attachment

display_name: place-attachment

sense-of-place

display_name: sense-of-place

urban-ecology

display_name: urban-ecology

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Electrodermal Activity (EDA) of Bi-cultural Visitors In Virtual Park Settings


maintainer: Yohann Chauvier

en: accepted-name synonyms flags large-scale r-package landsca conservation hard-limit taxonomy occurrence-records range-maps gbif filtering ecoregions species-observations species-distribution

en: gbif.range R package version 0.2 (deprecated)

en: GitHub URL

en: wsl.gbif R package version 0.1 (deprecated)

en: Test version, not to be used.

en: gbif.range R package version 1.1 (current)

en: Although species range may be obtained using expert maps or modeling methods, expert data is often species-limited and statistical models need more technical expertise as well as many species observations. When unavailable, such information may be extracted from the Global Biodiversity Information facility (GBIF), the largest public data repository inventorying georeferenced species observations worldwide. However, retrieving GBIF records at large scale may be tedious if users are unaware of specific tools and functions that need to be employed. Here we present *gbif.range*, an R library that contains automated methods to generate species range maps from scratch using in-house ecoregions shapefiles and an easy-to-use GBIF download wrapper. Finally, this library also offers a set of additional very useful parameters and functions for large GBIF datasets (generate doi, extract GBIF taxonomy, records filtering...). [gbif.range R project](https://github.com/8Ginette8/gbif.range)

accepted-name

display_name: accepted-name

conservation

display_name: conservation

ecoregions

display_name: ecoregions

filtering

display_name: filtering

flags

display_name: flags

gbif

display_name: gbif

hard-limit

display_name: hard-limit

landsca

display_name: landsca

large-scale

display_name: large-scale

occurrence-records

display_name: occurrence-records

r-package

display_name: r-package

range-maps

display_name: range-maps

species-distribution

display_name: species-distribution

species-observations

display_name: species-observations

synonyms

display_name: synonyms

taxonomy

display_name: taxonomy

en: gbif.range - An R package to generate species range maps based on ecoregions and a user-friendly GBIF wrapper


maintainer: Varun Sharma

en: mesoscale-modelling blowing-snow antarctica alps snow-atmosphere-interaction

en:
REPRODUCIBILITY_POSTPROCESSING.zip contains data and scripts used to produce all figures from for the associated manuscript submitted for peer review ( see section on Citations below )

The folders stand for the three case studies presented in the manuscript. Two case studies (case Ia and case Ib) are on simulations in Antarctica and one case study
case II is for simulations in the Alps.

The associated data in the form of netcdf files or text files were produced using CRYOWRF v1.0

Apart from reproducibility, the intention of sharing these scripts is also to make it easy for new users to adopt CRYOWRF and be efficient, in particular in processing snowpack outputs.

The scripts were tested on multiple machines (different OSes) with the attached YAML file (wrf_analysis.yml) to setup the conda environment. All scripts were run using spyder as the IDE.

en: REPRODUCIBILITY_SIMULATION.zip contains all the extraneous files required to perform the simulations in associated manuscript (see Citations 3 in README.txt). The purpose of sharing these files apart from purposes of reproducibility is to also serve as templates for users to learn the workflow of CRYOWRF and perform simulations for their own purposes.

en:
This repository contains data required for reproducibility of the results to be published in the associated manuscript.

Apart from reproducibility, the attached datasets also serve as templates for new users to adopt CRYOWRF in their research.

The datasets consist of two folders organized in zip format:

1. REPRODUCIBILITY_SIMULATION:
  Consists of namelists for WPS, WRF and SNOWPACK to reproduce simulations published in the manuscript
  Additional files include datasets (from IMAU-FDM / RACMO, see "credits" below ) as well as helper python scripts to
  produce *.sno files
  which are used as initial conditions for SNOWPACK in CRYOWRF.

2. REPRODUCIBILITY_POSTPROCESSING:
   Includes outputs of CRYOWRF and python scripts used to prepare figures in the manuscript.

Each of the folders have their own readme files for more details.

 Code
citation: Varun Sharma. (2021, July 2). vsharma-next/CRYOWRF: CRYOWRF v1.0 (Version v1.0). Zenodo. http://doi.org/10.5281/zenodo.5060165

location: https://gitlabext.wsl.ch/atmospheric-models/CRYOWRF   (stable releases / institutional repo)
        https://github.com/vsharma-next/CRYOWRF            (dev branches / developer repo)

 Publication
**Introducing CRYOWRF v1.0: Multiscale atmospheric flow simulations with advanced snow cover modelling.**
Varun Sharma, Fraziska Gerber and Michael Lehning, Submitted to Geoscientific Model Development

 Acknowledgements
We thank Peter Kuipers Munneke (P.KuipersMunneke@uu.nl) for preparing and sharing outputs of IMAU-FDM and RACMO used for initial conditions for case Ia. The relevant citations for the methods through which these datasets were generated are:

* Kuipers Munneke, P., S. R. M. Ligtenberg, B. P. Y. Noël, I. M. Howat, J. E. Box, E. Mosley-Thompson, J. R. McConnell, K. Steffen, J. T. Harper, S. B. Das and M. R. van den Broeke. 2015. Elevation change of the Greenland ice sheet due to surface mass balance and firn processes, 1960-2014. The Cryosphere, 9, 2009-2025. doi:10.5194/tc-9-2009-2015

 * Ligtenberg, S. R. M., P. Kuipers Munneke, B. P. Y. Noël, and M. R. van den Broeke. 2018. Brief communication: Improved simulation of the present-day Greenland firn layer (1960-2016). The Cryosphere, 12, doi:10.5194/tc-12-1643-2018

alps

display_name: alps

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

mesoscale-modelling

display_name: mesoscale-modelling

snow-atmosphere-interaction

display_name: snow-atmosphere-interaction

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Reproducibility Dataset for CRYOWRF v1.0


causal-effect-of-lup

title_for_slug: causal-effect-of-lup

en: psm-did land-use-planning land-use-change annual-effect plan-evaluation

en: causal-effect-of-lup

en:
Data.dbf contains the varibles of 1662 villages in Zhangzhou Cities
PSM_DID.R can re-produce the results

en:
Title: Does zoning contain built-up land expansion? Causal evidence from Zhangzhou City, China.

Research objective: Built-up land zoning is an imporatant policy measure of land use planning (LUP) to contain built-up land expansion in China. We used a difference-indifference model with propensity score matching to estimate the average and annual effect of built-up land zoning on built-up land expansion in Zhangzhou City, China between 2010 and 2020.

Data: Data.dbf contains the varibles of 1662 villages in Zhangzhou Cities in 1995, 2000, 2005, 2010, 2013, 2015, 2018, and 2020.
XZQDM2 is villages' unique administrative ID;
Area is the land area of village i;
Dis2water is the Euclidean distance from village i to the nearest waterbody;
Dis2coastl is the Euclidean distance from village i to the nearest coastline;
Dis2city is the the Euclidean distance from village i to the city center;
Dis2county is the the Euclidean distance from village i to the nearest county center;
Elevation is the the average elevation within village i;
Dis2road is the the Euclidean distance from village i to the nearest road;
Nei_Built_ is the the area of built-up land (Nei Built.upit) in the neighboring villages of village i in year t;
Treated is a binary variable, Treated = 1 to the villages that were partially or entirely located inside the development-permitted zones, and Treated = 0 to the villages that were entirely located outside the development-permitted zones;
Intensity is the percentage of land that was assigned to the development-permitted zones in village i;
Year represent the year in 1995, 2000, 2005, 2010, 2013, 2015, 2018, and 2020;
BuLE is the dependent variable, representing built-up land expansion in village i in year t;
Town is town' unique administrative ID.

Method: First, we employed propensity score matching to overcome the selection bias and satisfy the parallel trend
assumption. Second, we built four Difference-in-Difference models to estimate the average and annual effect.

annual-effect

display_name: annual-effect

land-use-change

display_name: land-use-change

land-use-planning

display_name: land-use-planning

plan-evaluation

display_name: plan-evaluation

psm-did

display_name: psm-did

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Causal effect of LUP


en: precipitation stream-water stable-water-isotopes geochemical-solutes spatially-distributed-sampling

en: The dataset contains daily measurements of volumes, isotopes and solutes of stream water as well as precipitation measured several locations; meteorological variables are added. Date: 18.07.2019

en:
This dataset contain measurements of solute and stable water isotopes in stream water and precipitation in the Alp catchment and two of its tributaries (between 2015 -2018) . The river Alp is a snow-dominated catchment situated in Central Switzerland characterized by an elevation range from 840 to 1898 m a.s.l. The dataset provides solutes (major anions and cations, trace metals) and stable water isotopes and water fluxes (precipitation rates, discharge) at daily intervals from several sampling locations.
An updated version of the isotope dataset is available here: https://www.doi.org/10.16904/envidat.242

geochemical-solutes

display_name: geochemical-solutes

precipitation

display_name: precipitation

spatially-distributed-sampling

display_name: spatially-distributed-sampling

stable-water-isotopes

display_name: stable-water-isotopes

stream-water

display_name: stream-water

en: Daily data of solute and stable water isotopes in stream water and precipitation in the Alp catchment, Central Switzerland


maintainer: Irmi Seidl

en: energy-cooperatives cooperatives switzerland renewable-energy community-energy

en: Codebook

en: Description of variable attributes and valid n

en: Raw date (SPSS)

en: Raw data in sav. format (SPSS). For comprehension of the data and variable structure, please consult the modified questionnaire with variable names.

en: Raw data (.csv)

en: Raw data in csv. format. For comprehension of the data and variable structure, please consult the codebook and the modified questionnaire with variable names.

en: Questionnaire with variable names

en: Modified questionnaire with variable names for each item. Should be used together with the data files (.csv or .sav) to reconstruct the data and variable structures.

en:
 Topic of Survey
The data at hand on energy cooperatives in Switzerland were collected in 2016 as part of the project "Collective financing of renewable energy projects in Switzerland and Germany" of the National Research Programme 71 "Managing Energy Consumption". The cooperatives were surveyed on their organizational structure, their activities in electricity and heat generation, their finances, the political context and their assessments of the future.

 Survey Method
The survey was targeted at all energy cooperatives in Switzerland (this is the basic population). The Swiss Commercial Register was searched for cooperatives and specific keywords in order to determine this basic population and collect addresses. This search in May 2016 resulted in a total of 304 energy cooperatives, to which a questionnaire was sent in July 2016. A pre-test with 8 persons had been carried out before the questionnaire was sent out. The questionnaire was provided in German and French. It was sent by mail and an attached letter referred to a link for the digital version if preferred. The online version was designed with the software "Sawtooth". After three weeks, a first, and after six weeks a second reminder letter was sent to those cooperatives that had not yet completed the questionnaire. The returned hardcopy questionnaires were manually entered into the database and then combined with the electronic data from the online survey. In the course of the survey, the total population was reduced from 304 to 289: in 4 cases the survey was not deliverable, 4 cooperatives had dissolved, 6 were not actually energy cooperatives, 1 case had recently changed its legal form. With a response rate of 47%, the final data set comprises 136 responses (from 77 digital and 59 hardcopy questionnaires). However, not all 136 of the returned questionnaires were filled out completely. We checked for answers that seemed contradictory or incomprehensible. If an error could be clearly identified and the correct answer derived, the answer was adjusted, otherwise the answer was replaced by "missing data".

 Anonymization
Participating cooperatives have been assured that their information will be kept confidential and will only be made public anonymously. For this reason, the data have been anonymized in in order to prevent any identification of individual cooperatives.

 How to Use the Data
* The data are available in CSV and SPSS (sav.) format.
* A codebook and a modified version of the used questionnaire are provided to illustrate the data and variable structure. In the questionnaire, the variable names are assigned to the corresponding questions. In the codebook, further information on these variables (valid n, answer categories) can be found. This information (of the codebook) is already integrated in the SPSS file.

 Current Embargo on Data
These data are currently under embargo and will only be released when the project is completed (not before 2020).

#Additional Information
* The used questionnaire is provided in German and French.
* Descriptive results of the survey were published in a WSL report: https://www.dora.lib4ri.ch/wsl/islandora/object/wsl:18943

community-energy

display_name: community-energy

cooperatives

display_name: cooperatives

energy-cooperatives

display_name: energy-cooperatives

renewable-energy

display_name: renewable-energy

switzerland

display_name: switzerland

en: Energy Cooperatives in Switzerland: Survey Results // Energiegenossenschaften in der Schweiz: Befragungsergebnisse


maintainer: Ueli Reber

en: policy-documents text-corpus environmental--policy bgb switzerland policy-analysis biodiversity

en: Replication files

en:
 Introduction

The ZIP file contains all data and code to replicate the analyses reported in the following paper.

Reber, U., Fischer, M., Ingold, K., Kienast, F., Hersperger, A. M., Grütter, R., & Benz, R. (2022). Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics. *Policy Sciences*. [https://doi.org/10.1007/s11077-022-09456-4](https://doi.org/10.1007/s11077-022-09456-4)

If you use any of the material included in this repository, please refer to the paper. If you use (parts of) the text corpus, please also refer to the sources used for its compilation listed below. The content of the texts may not be changed.

 Data folder

The data folder contains the following files.

* _corpus.parquet_: Text corpus of Swiss policy documents
* _dict_de.csv_: Biodiversity dictionary (German)
* _dict_fr.csv_: Biodiversity dictionary (French)
* _dict_it.csv_: Biodiversity dictionary (Italian)
* _topic_labels.csv_: labels/codes for policy sectors
* _topics.csv_: labels/codes for policy sectors

The corpus and the dictionary were compiled by the authors specifically for this project. The labels/codes for policy sectors are based on the [coding scheme](http://ws-old.parlament.ch/affairs/topics) of the Swiss Parliament.

 Text corpus

The text corpus consists of 439,984 Swiss policy documents in German, French, and Italian from 1999 to 2018. The corpus was compiled from the following source between 2020-10-01 and 2021-01-31.

* Transcripts and parliamentary businesses (e.g. questions, motions, parliamentary initiatives) via the [Web Services (WS)](https://www.parlament.ch/de/%C3%BCber-das-parlament/fakten-und-zahlen/open-data-web-services) provided by the Swiss Parliament
* The official compilation of federal legislation ("Amtliche Sammlung", AS) via [opendata.swiss](https://opendata.swiss/de/dataset/official-compilation-of-federal-legislation-bs-as-1947-2018) provided by the Swiss Federal Archives (SFA)
* The federal gazette ("Bundesblatt") via [fedlex.admin.ch](https://www.fedlex.admin.ch/de/fga/index)
* Decisions of federal courts via [entscheidsuche.ch (ES)](https://entscheidsuche.ch/)

The corpus is stored in a single data frame to use with R saved as [PARQUET](https://parquet.apache.org/) file (corpus.parquet). The data frame has the following structure.

* _text_id_: Unique identifier for each text (source information as prefix, e.g. "t_")
* _doc_type_: Document type (see coding scheme below)
* _branch_: Government branche (1 legislative, 2 executive, 3 judicative)
* _stage_: Stage of policy process (1 drafting, 2 introduction, 3 interpretation)
* _year_: Year of publication
* _topic_: Policy sector (coding scheme in separate file in data folder)
* _lang_: Language (de, fr, it)
* _text_: Text

The following list contains the coding scheme for the doc_type variable.

* 101: Federal gazette // Draft for public consultation ("Vernehmlassungsverfahren")
* 102: Federal gazette // Explanation of draft for parliament ("Botschaft")
* 103: Federal gazette // Strategy, action plan
* 104: Federal gazette // Federal council decree ("Bundesratsbeschluss")
* 105: Federal gazette // (Simple) Federal decree ("(Einfacher) Bundesbeschluss")
* 106: Federal gazette // General decree ("Allgemeinverfügung")
* 107: Federal gazette // Treaty ("Übereinkommen")
* 108: Federal gazette // Treaty ("Abkommen")
* 109: Federal gazette // Draft for parliament ("Entwurf")
* 110: Federal gazette // Report ("Bericht")
* 111: Federal gazette // Report of parliamentary comission ("Bericht")
* 112: Federal gazette // Report of federal council ("Bericht")
* 201: Parl. businesses // Submitted text
* 202: Parl. businesses // Reason text
* 203: Parl. businesses // Federal council response
* 204: Parl. businesses // Initial situation
* 205: Parl. businesses // Proceedings
* 301: Parl. transcripts // Speech of MP
* 302: Parl. transcripts // Speech of federal council
* 401: Federal legislation // Legal text of the official compilation (law, ordinances, etc.)
* 501: Court decisions // Federal Supreme Court
* 502: Court decisions // Federal Criminal Court
* 503: Court decisions // Federal Administrative Court

 Code folder

The code folder contains all R code for the analyses. The files are numbered chronologically.

* _1_classifier_training.R_: Training of classifiers for classification of policy sectors
* _2_classifier_application.R_: Classification of documents in corpus
* _3_dictionary_application.R_: Biodiversity indexing of documents in corpus
* _4_stm_truncation.R_: Truncation of indexed documents to keep only relevant parts
* _5_stm_translation.R_: Translation of FR and IT documents to DE
* _6_stm_model.R_: Preprocesssing and structural topic model
* _7_plots.R_: Plots and numbers as included in the paper

The code/functions folder contains custom functions used in the scripts, e.g. to support topic model interpretation.

Package versions and setup details are noted in the code files.

 Contact

Please direct any questions to Ueli Reber (ueli.reber@eawag.ch).

bgb

display_name: bgb

biodiversity

display_name: biodiversity

environmental--policy

display_name: environmental--policy

policy-analysis

display_name: policy-analysis

policy-documents

display_name: policy-documents

text-corpus

display_name: text-corpus

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Replication files for "Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics"


en: manure switzerland bioenergy biogas review

en: Production de biogaz à partir d’engrais de ferme en Suisse

en: L'objectif de ce livre blanc est de fournir aux décideurs, aux administrations et aux parties prenantes les résultats de recherche les plus récents afin de promouvoir l'utilisation optimale de la bioénergie issue des engrais de ferme dans la transition énergétique suisse. A cette fin, les résultats du centre de compétence suisse pour la recherche en bioénergie - SCCER BIOSWEET - sont résumés et présentés dans un contexte plus large. Si rien d'autre n'est mentionné, les résultats se réfèrent à la Suisse et, dans le cas de la matière première, aux potentiels nationaux de biomasse.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review


maintainer: Yaquan Chang

en: habitat-heterogeneity hengduan-mountains hypervolume phytodiversity model-residuals

en: HDM heterogeneity scales

en: The Heterogeneity matrics in the Hengduan mountain scale

en: Eurasia plant family richness map

en: This is the plant family level richness map at the Eurasia scale calculated from https://www.nature.com/articles/s41597-021-00997-6

en: Plant range map at Hengduan scale

en: This is the plant range map at the Hengduan mountain scale based on species distribution model, elevation, and county level distribution information

en: Eurasia SR and heteorgeneity

en: This table is used for the Eurasia scale analyses, including both family level species richness map and different heterogeneity predictors

en: Hengduan plant family richness map

en: This is the family level plant richness map in the Hengduan mountain scale at 1km resoution

en: This research data is used to re includes 1 km resolution seed plant species range maps for the Hengduan mountain region (southwest China), elevation information for each species, family-level plant richness data, and habitat heterogeneity data at both Eurasia and Hengduan mountain regions. This research data includes 1 km resolution seed plant species range maps for the Hengduan mountain region (southwest China), elevation information for each species, family-level plant richness data, and habitat heterogeneity data at both Eurasia and Hengduan mountain regions.

habitat-heterogeneity

display_name: habitat-heterogeneity

hengduan-mountains

display_name: hengduan-mountains

hypervolume

display_name: hypervolume

model-residuals

display_name: model-residuals

phytodiversity

display_name: phytodiversity

en: Phytodiversity is associated with habitat heterogeneity from Eurasia to Hengduan


maintainer: Yves Bühler

en: uav orthophoto dsm photogrammetry snow-depth-mapping drone-data wingtra

en: Data Access

en:
- DSM (10 cm resolution)
- Ortho (3 cm resolution)
- HS (10 cm resolution)
- original RGB drone images
- Agisoft Metashape Processing Report

All products are also available as a cloud optimized geotiff.

en: To map and assess snow depth on different dates, 9 flights were conducted in the winter season of 2020/21 at the Latschüelfurgga in Davos. The data was captured with a Sony RX1R II mounted on a Wingtra drone and was processed with the Agisoft Metashape software. High-resolution DSMs, orthomosaics and snow height rasters, as well as the original RGB images from each flight are available.

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

snow-depth-mapping

display_name: snow-depth-mapping

uav

display_name: uav

wingtra

display_name: wingtra

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Photogrammetric Drone Data Latschuelfurgga