en: national-dishes latent-semantic-analysis food-preferences food-taste-similarity agro-food-trade

en: information on ingredients of national dishes

en: shows information of ingredients of all national dishes of 171 countries and their names

en: National dishes, migration data and data for bilateral food trade flows

en:
The data include information on national dishes, migration data and data for bilateral food
trade flows for 5 years as well as importer and exporter GDP, population, distance between
most populated cities, bilateral information on Preferential Trade Agreements, common
official primary langauge, common colonizer post-1945, colonial relationship for overall
171 countries. The final data set contains 145,350 observations (29,070 country pairs for
5 years)

en: dyadic food similarity measures, pairwise similarity and dissimilarity (chord diagram)

en:
The figures show the distribution of two dyadic food tastes similarity measures on the base of
the national dishes: (i) the Manhattan distance and the (ii) latent semantic analysis. The chord diagram
shows the results for country pairs with most and less similarity on basis of the LSA-approach.

en: The data described in this article were collected daily over the period 4 June 2018 to 23 August 2018 and contains information of several data sources. The database includes information on national recipes and their ingredients for 171 countries, measures for food taste similarities between all 171 countries as well as bilateral migration and agro-food trade data for 5 years. The database can be used for analyzing e.g., the relation between food preferences and international trade or food preferences and health outcomes (e.g., obesity) across countries.

agro-food-trade

display_name: agro-food-trade

food-preferences

display_name: food-preferences

food-taste-similarity

display_name: food-taste-similarity

latent-semantic-analysis

display_name: latent-semantic-analysis

national-dishes

display_name: national-dishes

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data of national dishes, their similarity and trade flows


wind-crust-formation-snowmicropen-data

maintainer: EnviDat Support

title_for_slug: wind-crust-formation-snowmicropen-data

en: wind-packing snowmicropen snow wind-crust smp

state: active

type: dataset

en: Processing scripts

media_type: application/zip

en: Contains the R-scripts used to process the SMPs

format: ZIP

mimetype: application/zip

en: SMP data

en: Links to the dataset

format: SERVICE

en: README

media_type: text/plain

en: Describes the dataset in detail

format: TXT

mimetype: text/plain

en:
This dataset contains the SnowMicroPen (SMP) data from 38 wind tunnel experiments on wind-packing / wind crust formation. These experiments were performed in the winters 2015/16 and 2016/17 and include more than 1000 SMP measurements.

The SMPs are organized per experiment. Each experiment subfolder contains the processed SMP profiles and some additional files.

Please refer to the README for more details on the data. The processing scripts are available for download as well. The scripts are mainly provided as documentation and would need to be adjusted to be used.

This dataset is the basis of the following publication:

Sommer C.G., Lehning M., & Fierz C. (2017). Wind tunnel experiments: Saltation is necessary for wind-packing. Journal of Glaciology, 63(242), 950-958. doi:10.1017/jog.2017.53

smp

display_name: smp

snow

display_name: snow

snowmicropen

display_name: snowmicropen

wind-crust

display_name: wind-crust

wind-packing

display_name: wind-packing

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Wind crust formation: SnowMicroPen data


vegetation-height-model-nfi

maintainer: Christian Ginzler

title_for_slug: vegetation-height-model-nfi

en: forest photogrammety vegetation-height-model 3d point-cloud

en: Thumbnail

mimetype: image/jpeg

en: Countrywide Stereo-Image Matching for Updating Digital Surface Models in the Framework of the Swiss National Forest Inventory

media_type: application/pdf

format: PDF

en: 2012 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2012' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2007 to 2012.

format: GeoTIFF

en: 2016 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2016' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2011 to 2016.

en: 2015 Vegetation Height Model NFI

en:
Data 'Vegetation Height Model NFI 2015' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2010 to 2015.

en: 2019 Vegetation Height Model NFI (current)

en:
Data 'Vegetation Height Model NFI 2019' available on request (christian.ginzler@wsl.ch).

A national vegetation height model was calculated for Switzerland using digital aerial images. We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution (1 × 1 m). The DSM was then normalized to obtain the actual vegetation heights using the digital terrain model (DTM) SwissAlti3D based on airborne laser data. Buildings are masked out using the NDVI information of the aerial images to produce a vegetation height model, and to produce a vegetation height model (VHM). Such a model will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very high level of detail. For covering the whole of Switzerland, we used summer aerial images from 2013 to 2019.

en:
A national vegetation height model was calculated for Switzerland using digital aerial images.
We used the stereo aerial images acquired by the Federal Office of Topography swisstopo using the ADS80 sensor to first calculate a digital surface model (DSM) with a very high spatial resolution
(1 × 1 m and 0.5 x 0.5 m). The DSM was then normalized to obtain the actual
vegetation heights using a digital terrain model (DTM)
based on laser data with the buildings masked out, and to
produce a vegetation height model (VHM). Such a model
will be calculated in the framework of the Swiss National Forest Inventory (NFI) with consistent methods and a very
high level of detail. For covering the whole of Switzerland,
we use summer aerial images from six years.

Latest version is from 2019.

forest

display_name: forest

photogrammety

display_name: photogrammety

point-cloud

display_name: point-cloud

vegetation-height-model

display_name: vegetation-height-model

en: Vegetation Height Model NFI


maintainer: Dirk Nikolaus Karger

en: climate-change climate-layers temperature climatology bioclim climate precipitation free-climate-data

en: CHELSA V2.1 (current)

en: CHELSA Version 2.1 based on ERA5 forcings and CMIP6

en: CHELSA V1.2 (deprecated)

en: CHELSA Version 1.2 based on ERA-Interim forcings and CMIP5

en: CHELSA Technical Documentation

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present the CHELSA (Climatologies at high resolution for the earth’s land surface areas) data of downscaled temperature and precipitation to a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperatures. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height, with a subsequent bias correction.

CHELSA data published in EnviDat includes the deprecated version 1.2 (originally published under 10.5061/dryad.kd1d4). Please use the current 2.1 version.

Paper Citation:
 > _Karger DN. et al. Climatologies at high resolution for the earth’s land surface areas, Scientific Data, 4, 170122 (2017) [doi: 10.1038/sdata.2017.122](https://doi.org/10.1038/sdata.2017.122)._

bioclim

display_name: bioclim

climate

display_name: climate

climate-change

display_name: climate-change

climate-layers

display_name: climate-layers

climatology

display_name: climatology

free-climate-data

display_name: free-climate-data

precipitation

display_name: precipitation

temperature

display_name: temperature

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


swiss-fluxnet-site-lageren

title_for_slug: swiss-fluxnet-site-lageren

en: meteorological-measurements swiss-forest-lab forest eddy-covariance greenhouse-gas flux swiss-fluxnet

en: Data access

en: The flux and meteo data of the Swiss FluxNet site Lägeren are openly available from the European Fluxes Database Cluster.

en: Fluxnet2015 dataset

en: The flux and meteo data of the Swiss FluxNet site Lägeren are also part of the Fluxnet2015 dataset.

en: Site description

en:
The Swiss FluxNet Site Lägeren is a managed mixed deciduous mountain forest located on the steep Lägeren mountain (NW of Zurich, Swiss Plateau). The forest is highly diverse, dominated by beech, but also including ash, maple, spruce and fir trees. Eddy covariance flux measurements were started in April 2004. The site was part of the international CarboEurope IP network and the National Air Pollution Monitoring Network (NABEL). In addition to Swiss FluxNet, the site is part of the Long-term Forest Ecosystem Research (LWF) of WSL and the biological drought and growth indicator network (TreeNet) of WSL.

Measurements

- Ecosystem flux measurements of CO2, H2O vapour are performed with the eddy-covariance method. This method is based on measurements of trace gas mixing ratios, using infrared gas analyzers (for CO2, H2O vapor), combined with wind speed and wind direction measurements, using 3D sonic anemometers. To resolve the short-term turbulent fluctuations in the atmosphere, very fast measurements are needed: we measure at 10-20 Hz, i.e., 10-20 times per second. To assess the energy budget of each ecosystem, also radiation sensors and soil climate profiles are installed at the site.
- Sub-canopy eddy fluxes (CO2, H2O), soil respiration campaigns
- Continuous CO2 profile measurements.
- Auxiliary micrometeorology and soil climate measurements.

Data availability

All data are available from the European Fluxes Database Cluster, but are also part of Fluxnet2015 dataset.

Data policy

ICOS data license:
[https://www.icos-cp.eu/data-services/about-data-portal/data-license](https://www.icos-cp.eu/data-services/about-data-portal/data-license)

Detailed site info:
[https://www.swissfluxnet.ethz.ch/index.php/sites/ch-lae-laegeren/site-info-ch-lae//](https://www.swissfluxnet.ethz.ch/index.php/sites/ch-lae-laegeren/site-info-ch-lae/)

eddy-covariance

display_name: eddy-covariance

flux

display_name: flux

greenhouse-gas

display_name: greenhouse-gas

meteorological-measurements

display_name: meteorological-measurements

swiss-fluxnet

display_name: swiss-fluxnet

swiss-forest-lab

display_name: swiss-forest-lab

en: Swiss FluxNet Site Lägeren


photogrammetric-drone-data-gruenbodeli

title_for_slug: photogrammetric-drone-data-gruenbodeli

en: wingtra snow-depth-mapping drone-data orthophoto dsm photogrammetry uav

en: Data Access

en:
- ortho (3 cm/25 mm resolution)
- DSM (10 cm resolution)
- HS (10 cm resolution)
- RGB images
- Agisoft Metashape Project Report

All products are also available as a cloud optimized geotiff.

en:
We conducted various drone flights at Grüenbödeli near Davos with the Sony RX1R II mounted on a Wingtra drone during 2020/21/22. The data was processed with the Agisoft Metashape Professional Software.
The following products are available for download:
- DSM 10cm resolution
- Orthomosaic 3cm/25mm resolution
- Snow Raster 10cm resolution
- original RGB images

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

snow-depth-mapping

display_name: snow-depth-mapping

uav

display_name: uav

wingtra

display_name: wingtra

en: Photogrammetric Drone Data Grüenbödeli


en: wingtra dsm drone-data photogrammetry uav

en:
- DSM 10cm resolution
- Orthomosaic 3cm resolution
- Agisoft Metashape Processing Report
- original RGB images

All generated products are also available as a cloud optimized geotiff.

en: We conducted four drone flights in Davos Wolfgang Arelen, in 2020/21 and 2022 to obtain data for the generation of DSMs and orthomosaics at a high resolution. The data was processed with the Agisoft Metashape Professional Software.

en: Photogrammetric Drone Data Wolfgang Arelen


maintainer: Felix Neff

en: restoration grassland diversity long-term-experiment functional-traits insects functional-diversity topsoil-removal

en: Insect traits

media_type: text/csv

en:
Functional traits of all herbivorous insect species sampled in the study.

- **Species**: Insect species name (following [Fauna Europaea](https://fauna-eu.org))
- **Author**: Author and year of species' description (following [Fauna Europaea](https://fauna-eu.org))
- **Group**: Insect group as used in the analyses
- **Body volume**: Body volume determined by body length, body width and body height (in mm$^3$)
- **Body_shape**: Ratio of body length to body width
- **Hind_femur_shape**: Ratio of hind-femur length to hind-femur width
- **Hind_front_leg_ratio**: Ratio of front-leg length to hind-leg length (leg length = femur length + tibia length)
- **Wing_length_rel**: Ratio of wing length to body length
- **Leg_length_rel**: Ratio of front-leg length to body length (leg length = femur length + tibia length)
- **Antenna_length_rel**: Ratio antenna length to body length
- **Eye_width_rel**: Ratio of eye width to head width (Auchenorrhyncha, Heteroptera) / to head height (Orthoptera)
- **Feeding_specialization**: Insect specialization on food source (*m*: monophagous, *o*: oligophagous, *p*: polyphagous)
- **Feeding_tissue**: Feeding tissue used for feeding (*c*: chewers, *x*: xylem, *p*: phloem, *m*: mesophyll, *m-p/r*: mesophyll as well as phloem and/or reproductive organs, *r*: reproductive organs, *se*: ripe seeds)
- **Hibernation**: Hibernation stage (*e*: egg, *e/n*: egg and nymph, *n*: nymph, *a*: adult)
- **Generations**: Number of generations per year (*1.5* stands for *1-2* generations per year)
- **Moisture_pref_mean**: mean of preferred habitat moistures (*1*: xerophilous, *2*: moderately xerophilous, *3*: moderately mesohygrophilous, *4*: mesohygrophilous, *5*: moderately hygrophilous, *6*: hygrophilous, *7*: moderately hydrophilous, *8*: hydrophilous)
- **Moisture_pref_range**: range of preferred habitat moistures (indicating degree of specialization)

format: CSV

mimetype: text/csv

en: Plot information

en:
Information on the experimental plots.

- **Plot**: ID of Plot
- **Treatment**: Experimental treatment
- **Landuse_history**: recent agricultural use for Initial; agricultural use before restoration for all restored sites
- **Last_tilled**: Last time the site was tilled
- **Intensity**: Frequency and intensity of mowing and manuring (*intensity1*: mowing once and no manure, i*ntensity2*: 2-3 times mowing and no manure, *intensity3*: 2-3 times mowing and manuring, *intensity4*: 4-5 times mowing and manuring)
- **Slope**: slope gradient according to classes defined by FAO (1990)
- **X**: X coordinate of the plot (CH1903)
- **Y**: Y coordinate of the plot (CH1903)
- **Cluster**: Spatial cluster of the plot

en: Insect abundance

en:
Abundance of adult insects recorded in the samplings on all experimental sites

- **Plot**: ID of Plot
- **Treatment**: Experimental treatment
- **Species**: Insect species name (following [Fauna Europaea](https://fauna-eu.org))
- **Author**: Author and year of species' description (following [Fauna Europaea](https://fauna-eu.org))
- **Group**: Insect group as used in the analyses
- **Number_Adults**: Number of adult individuals recorded
- **Herbivore**: Logical indicating whether the species is feeding as a herbivore (*TRUE*) or not (*FALSE*)

en:
This dataset contains all data, on which the following publication below is based.

**Paper Citation**:

Neff, F., Resch, M. C., Marty, A., Rolley, J. D., Schütz, M., Risch, A. C, Gossner, M. M. 2020. Long-term restoration success of insect herbivore communities in semi-natural grasslands: a functional approach. Ecological Applications, 30, e02133. [10.1002/eap.2133](https://doi.org/10.1002/eap.2133)

Please cite this paper together with the citation for the datafile.

 Methods

 Study site
The study area is situated within and nearby to Eigental nature reserve (47°27’36” to 47°29’06” N, 8°37’12” to 8°37’44” E, 461 to 507 m a.s.l.) in the vicinity of Zurich airport (Canton Zurich, Switzerland). Mean annual precipitation and temperature is 903 ± 136 mm and 9.14°C ± 0.50°C (mean ± SD for 2007-2017 (*MeteoSchweiz 2018*)). In 1967, the Eigental nature reserve was established to protect small and isolated remnants of species-rich, semi-natural grasslands (roughly 12 ha), which were embedded in an otherwise intensively managed landscape. It is characterized by oligo- to mesotrophic Molinion (semi-wet, matrix species *Molinia caerulea*) and Mesobromion (semi-dry, matrix species *Bromus erectus*) meadows (*Delarze et al. 2015*), reflecting small-scale habitat heterogeneity, mainly due to site-specific groundwater levels and slope inclination. As in most Central European grasslands, management is necessary to prevent shrub and tree invasions as well as to secure low levels of available soil nutrients and thus to maintain these species-rich habitats ([*Poschlod and WallisDeVries 2002*](https://doi.org/10.1016/S0006-3207(01)00201-4)).
In 1990, the government of the Canton Zurich decided to enlarge the Eigental nature reserve as a counter measure against degradation and biodiversity loss in semi-natural grasslands due to overutilization and the excessive input of nutrients (mostly nitrogen). Eleven patches of adjacent intensively managed grassland (in total roughly 20 ha) were targeted to be transformed into semi-natural grasslands. As a first restoration measure, fertilization was ceased, and biomass harvested three times to remove excessive soil nutrients from the original system and thus benefit plant species with low competitive ability on the long run. In 1995, the restoration efforts were increased and a large-scale experiment comprising three restoration measures with increasing intervention intensities was implemented:

- **Harvest only**: Initial restoration measures were continued with mowing and removing of the aboveground biomass two times a year (early summer and autumn).
- **Topsoil**: Removal of topsoil, depending on the thickness of the A horizon the upper 10 to 20 cm, in four randomly selected areas within the eleven patches in late autumn 1995. The size of the restoration area depended on individual patch size (2700 to 7000 m2).
- **Topsoil + Propagules**: Plant propagules were added on half of the area where topsoil was removed via application of fresh, seed-containing hay and hand-collected propagules of target species originating from semi-dry and semi-wet species-rich grasslands with local and regional provenance (within radius of 7 to 30 km) (1995, 1996, 1997).

Management of *Topsoil* and *Topsoil + Propagules* started five years after treatment implementation and included yearly mowing and removing of aboveground biomass (late summer or early autumn). The experiment was complemented with intensively managed grassland sites that share the same agricultural history as the restored sites (**Initial**; swards dominated by *Lolium perenne*, *L. multiflorum* and *Trifolium repens*): mowing and subsequent fertilizing (manure) up to five times a year, as well as different tillage regimes. Finally, sites were selected in target semi-dry and semi-wet grasslands (**Target**) located within the Eigental nature reserve and another nature reserve nearby (Altläufe der Glatt; 47°28’29” to 47°27’41” N, 8°31’56” to 8°32’26” E, 418 to 420 m a.s.l.). The selected target sites are mown and aboveground biomass removed once a year in late summer or early autumn. For each of the five treatments, we selected eleven plots (5 m × 5 m) spread across the sites. Altogether, the experiment included 55 plots.

 Arthropod sampling
Aboveground arthropods were sampled using suction sampling on four consecutive days in early July 2017 before the grasslands were mown. Arthropods were sampled in two locations on each 5 m × 5 m plot, once in the south-western and once in the north-eastern corner to account for possible spatial heterogeneity within the plots. Arthropods were sorted to order or lower taxonomic levels and individuals were identified to species level. We focused on three groups (Hemiptera: Auchenorrhyncha, Hemiptera: Heteroptera, Orthoptera),

 Functional traits
We used two sets of functional traits in this study.

**Morphometric traits**:
Body volume, body shape, hind femur shape, hind/front leg ratio, wing length, leg length, antenna length and eye width. We used trait measurements from [*Simons et al. (2016)*](http://dx.doi.org/10.1890/15-0616.1) and [*Neff et al. (2019)*](https://doi.org/10.1007/s10980-019-00872-1) and complemented them with measurements on study specimens. These measurements were conducted using a high-resolution measuring stereo microscope (Leica DVM6, Leica Microsystems) including automated high-resolution photo stacking with the software Leica Application Suite X (LAS X, © 2018 Leica Microsystems CMS GmbH) and Leica Map Premium (Leica Microsystems, © 1996-2017 Digital Surf) at WSL Birmensdorf. The eight morphometric traits were calculated from direct measurements of body parts on specimens of all sampled species. From each species, we measured at least one female and one male specimen. Additionally, for species that show wing dimorphism, we included the different wing morphs and weighted them by their prevalence reported in literature. For few species, of which not all wing morphs were available for measurements (10 cases), we estimated relative wing length from congeneric species or from the literature.

**Life-history traits**
Based on an existing data set collected by [*Gossner et al. (2015)*](http://dx.doi.org/10.1890/14-2159.1). We included traits describing different life-history characteristics of herbivore insect species, namely: feeding specialization, feeding tissue, hibernation stage and number of generations per year, which are related to insect species’ vulnerability to changes in plant community composition, microhabitat use and disturbance tolerance. To represent potential changes in habitat moisture with abandonment of intensive land use (e.g., change in ground-water level), we also included two traits related to preferred habitat moisture of the study species: moisture preference, describing species’ optimum habitat moisture, and moisture range, which describes the species’ range of preferable moisture conditions.

 References

Delarze, R., Y. Gonseth, S. Eggenberg, and M. Vust. 2015. Lebensräume der Schweiz: Ökologie - Gefährdung - Kennarten. 3rd ed. Ott, Bern.

Gossner, M. M., N. K. Simons, R. Achtziger, T. Blick, W. H. O. Dorow, F. Dziock, F. Köhler, W. Rabitsch, and W. W. Weisser. 2015. A summary of eight traits of Coleoptera, Hemiptera, Orthoptera and Araneae, occurring in grasslands in Germany. Scientific Data 2:150013.

MeteoSchweiz. 2018. Klimabulletin Jahr 2017. MeteoSchweiz, Zürich.

Neff, F., N. Blüthgen, M. N. Chisté, N. K. Simons, J. Steckel, W. W. Weisser, C. Westphal, L. Pellissier, and M. M. Gossner. 2019. Cross-scale effects of land use on the functional composition of herbivorous insect communities. Landscape Ecology 34:2001–2015.

Poschlod, P., and M. F. WallisDeVries. 2002. The historical and socioeconomic perspective of calcareous grasslands—lessons from the distant and recent past. Biological Conservation 104:361–376.

Simons, N. K., W. W. Weisser, and M. M. Gossner. 2016. Multi-taxa approach shows consistent shifts in arthropod functional traits along grassland land-use intensity gradient. Ecology 97:754–764.

diversity

display_name: diversity

functional-diversity

display_name: functional-diversity

functional-traits

display_name: functional-traits

grassland

display_name: grassland

insects

display_name: insects

long-term-experiment

display_name: long-term-experiment

restoration

display_name: restoration

topsoil-removal

display_name: topsoil-removal

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Grassland restoration: insects and insect traits


data-set-on-snow-instability

title_for_slug: data-set-on-snow-instability

en: propgatoin-saw-test avalanche-forcasting slab-tensile-support crack-propagation snow-avalanche rutschblock snow-stability-evaluation weak-layer slab failure-initiation

en: Read-me file on snow instability data

mimetype: application/pdf

en: data set on snow instability

en:
These data on snow instability include three data subsets that were analyzed and the results published by Reuter and Schweizer (2018) who suggest a novel framework on how to describe snow instability by failure initiation, crack propagation and slab tensile support.

Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Reuter, B. and Schweizer, J., 2018. Describing snow instability by failure initiation, crack propagation and slab tensile support. Geophys. Res. Lett., 45, doi: 10.1029/2018GL078069.

avalanche-forcasting

display_name: avalanche-forcasting

crack-propagation

display_name: crack-propagation

failure-initiation

display_name: failure-initiation

propgatoin-saw-test

display_name: propgatoin-saw-test

rutschblock

display_name: rutschblock

slab

display_name: slab

slab-tensile-support

display_name: slab-tensile-support

snow-avalanche

display_name: snow-avalanche

snow-stability-evaluation

display_name: snow-stability-evaluation

weak-layer

display_name: weak-layer

en: Data set on snow instability


maintainer: Maria Elvira Murazzi

en: forest-trees nanoplastic uptake polystyrene 13c-labelling

en: Nanoplastic in forests experiment

en:
Data embargoed until August 2022, and it will be provided upon request

-  excel file containing: two working sheets (leaf supply and root supply experiment) with a table with the values 13C-nanopolystyrene in the different tissues of the two forest tree species; graph showing the differences between controls and treatments of 13C-nanopolystyrene enrichment for each tissue of each forest tree species; ANOVA table showing significant values after having exposed the tree species to 13C-nanopolystyrene

format: XLS

en:
The fate of plastic in the environment is of global concern, because its production recently has
increased strongly and it accumulates in terrestrial and aquatic ecosystems. Although some knowledge on
its role in aquatic and terrestrial ecosystems was gained in the recent decade, hitherto very little is known
about the impact of micro and nanoplastics in forest ecosystems.

The aim of this pioneering project was to explore if nanoplastics are taken up by forest trees species
through leaves or roots. In greenhouse experiments, we exposed leaves or roots of seedling of two forest
trees species to solutions with highly 13C-labelled polystyrene nanoparticles (13C-nPS, 99 atom%) and
examined if they were incorporated in different above- and belowground tissues.

Treated part of the trees for both species showed significant 13C-enrichment, indicating that trees take up nanoparticles. However, the overall 13C signal strength in tissues that were not exposed to the 13C label remained low (Δδ13C<1‰) and was confined to a few seedlings, leaving it ambiguous whether nanoplastic transport occurs or not.

We acknowledge that the new method developed might be not sensitive enough to unequivocally detect
mechanisms of nanoplastic uptake and transport at environmentally realistic concentrations.

forest-trees

display_name: forest-trees

nanoplastic

display_name: nanoplastic

polystyrene

display_name: polystyrene

uptake

display_name: uptake

en: Nanoplastics in forests: Exploring the effects of nanoplastics on forest soils and tree physiology (NanoPlast)


maintainer: Jana von Freyberg

en: snowpack-outflow snowmelt-rate stable-water-isotopes snowmelt-lysimeter solutes

en: The dataset contains volumes, solutes and stable water isotopes of snowpack outflow at daily resolution. 10-minute data are provided of the measurements taken by three snowmelt lysimeter systems at spatially-distributed locations.

en:
This data contain volumes, solutes and isotopes of snowpack outflow measured by a snowmelt lysimeter system at three locations in the southern Alp catchment, situated Central Switzerland. The river Alp is a snow-dominated catchment situated in Central Switzerland characterized by an elevation range from 840 to 1898 m a.s.l.
The dataset provides solutes (major anions and cations, trace metals) and stable water isotopes and water fluxes (snowpack outflow volumes) at daily intervals from several sampling locations. Additionally, the data measured by the snowmelt lysimeter system are provided in 10-minute resolution.

snowmelt-lysimeter

display_name: snowmelt-lysimeter

snowmelt-rate

display_name: snowmelt-rate

snowpack-outflow

display_name: snowpack-outflow

solutes

display_name: solutes

stable-water-isotopes

display_name: stable-water-isotopes

en: Daily data of the volumes, solutes and isotopes in snowpack outflow measured at three locations in the southern Alp catchment


aerosol-data-davos-wolfgang

title_for_slug: aerosol-data-davos-wolfgang

en: raclets inp ice-nucleation drincz aerosol particles

en: OPC GT-526S Dataset Davos Wolfgang

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en: DRINCZ Dataset Davos Wolfgang

en: The DRINCZ file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en: SMPS Dataset Davos Wolfgang

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity), in a temporal resolution of 2 minutes, with time in UTC, measured at Davos Wolfgang.

mimetype: application/x-netcdf

en: OPC-N3 Dataset Davos Wolfgang

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: APS Dataset Davos Wolfgang

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Davos Wolfgang.

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs) and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3788 , TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and DRINCZ: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l minˉ¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the DRoplet Ice Nuclei Counter Zurich (DRINCZ, ETH Zurich) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

drincz

display_name: drincz

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

particles

display_name: particles

raclets

display_name: raclets

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Aerosol Data Davos Wolfgang


digitizing-historical-plague

title_for_slug: digitizing-historical-plague

en: yersinia-pestis plague-inventory palaeo-epidemiology plague-mapping plague-outbreaks black-death bubonic-plague historical-plague

en: We present newly digitized data on 6,929 plague outbreaks that occurred between 1347 and 1900 AD across Europe. The data base on an inventory initially published 1976. For georeferencing the information of Tele Atlas 2009 was used. The coordinates are in the reference systems ETRS89 and WGS84.

black-death

display_name: black-death

bubonic-plague

display_name: bubonic-plague

historical-plague

display_name: historical-plague

palaeo-epidemiology

display_name: palaeo-epidemiology

plague-inventory

display_name: plague-inventory

plague-mapping

display_name: plague-mapping

plague-outbreaks

display_name: plague-outbreaks

yersinia-pestis

display_name: yersinia-pestis

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Digitizing historical plague


maintainer: Matthias Haeni

en: temperature par wind-speed long-term climate-change meteo precipitation meteorology swiss-forest-lab relative-humidity

en: Data plot of the forest station (JUB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site photo of the forest station (JUB)

en: Site photo of the forest station from the side.

en: Data plot of the field station (JUF)

en: Data file.

en: Site photo of the field station (JUF)

en: Site photo of the field station from the side.

en: Forest station data (JUB)

en: Site aerial photo (Jussy)

en: Site aerial photo from both Jussy stations. Source: Google. 2016. Site aerial photo from both Jussy stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Jussy in Switzerland where one station is located within a natural broad-leaved forest stand (JUB) with sessile oak (_Quercus petrea_; 90 yrs), aspen (_Populus tremula_; 60 yrs) and European hornbeam (_Carpinus betulus_; 60 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, JUF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Jussy is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Jussy, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: dryocosmus-kuriphilus pest-invasion southern-switzerland biological-control castanea-sativa torymus-sinensis population-evolution

en:
Data has been collected from summer 2011 to 2016.

Main reasons for NA values:

-	D. kuriphilus still not arrived in the site.
-	No galls were found during the field sampling.
-	Site has not been sampled in the correspondent year because of time, weather or money constrains.
-    T. sinensis not found in the galls

Variable description:

Year = sampling year.

Coordinate, elevation, slope, aspect = average site characteristics.

ts_arrival = T. sinensis arrival year.

dk_arrival = D. kuriphilus arrival year.

dk_parasitism_by_ts = D. kuriphilus parasitism rate by T. sinensis. Formula: (no. of T. sinensis/ no. of D. kuriphilus chambers) * 100 at gall level.

dk_infestation = Percentage of attacked buds. Formula: no. of attacked buds / no. of total developed buds*100 (as presented in Kotobuki et al. 1985) at shoot level.

ts_per_bud = number of alive T. sinensis individual calculated at bud level.

dk_per_bud = number of alive D. kuriphilus individual calculated at bud level.

dk_pot_per_bud = overall number (dead and alive) D. kuriphilus individual calculated at bud level.

total_gall_nr_per_bud = average gall number per bud.

chamber_per_galls = average D. kuriphilus chamber number per gall.

For details see the submitted publication with the same name

References
Kotobuki, K., Mori, K. and Sato, Y. (1985) ‘2 methods to estimate the tree damage by chestnut gall wasp Dryocosmus-kuriphilus’, Bulletin of the fruit tree research station A (Yatabe), 2(12), pp. 29–36.

en:
This dataset contains the population evolution of a pest and its biocontrol agent in terms of presence proportion at gall level and absolute number of insects.

The study area extends from the Cuneo region (Piedmont, Italy) to southern Switzerland. In order to provide a complete range of data covering the entire process from the pest arrival to complete biological control by its natural enemy T. sinensis, a space-for-time substitution approach has been adopted so as to create a temporal gradient of the epidemic stages over the whole study area.

The southernmost Swiss sites roughly represent the arrival and establishment of the pest without the presence of the natural enemy, the central ones the early epidemic stage and the epidemic peak, whereas the northern ones the end of the epidemic with the beginning of the biocontrol. The Italian ones represent the beginning of the equilibrium between the two population as well as the situation with stable T. sinensis populations on the long term.

These data are used in the paper entitled: Torymus sinensis local and regional early population dynamics in the Insubrian and Piedmont regions

biological-control

display_name: biological-control

castanea-sativa

display_name: castanea-sativa

dryocosmus-kuriphilus

display_name: dryocosmus-kuriphilus

pest-invasion

display_name: pest-invasion

population-evolution

display_name: population-evolution

southern-switzerland

display_name: southern-switzerland

torymus-sinensis

display_name: torymus-sinensis

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal


maintainer: Sven-Eric Hopf

en: fraxinus iap forest monitoring ash-dieback

en: Monitoring of ash trees as part of the Intercantonal Forest Observation Programme

en: Packgroun information on data for the publication: Spread and Severity of Ash Dieback in Switzerland – Tree Characteristics and Landscape Features Explain Varying Mortality Probability, (Klesse et al. 2021, Front. For. Glob. Change 4:645920., doi: 10.3389/ffgc.2021.645920)

en:
In 2013, the Institute for Applied Plant Biology (IAP) started a monitoring programme to study the development and the spatial variation of the ash dieback disease with the aim to find some partially resistant European ash trees (Fraxinus excelsior).
We collaborate as co-authors for the publication: Spread and Severity of Ash Dieback in Switzerland - Tree Characteristics and Landscape Features Explain Varying Mortality Probability (Klesse et al. 2021 in frontiers)

ash-dieback

display_name: ash-dieback

forest

display_name: forest

fraxinus

display_name: fraxinus

iap

display_name: iap

monitoring

display_name: monitoring

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Marco Moretti

en: functional-diversity protected-areas climate wild-bee biodiversity elevation-gradient beta-diversity switzerland anthophila community-indices resource-availability predictive-modelling urbanization hymenoptera

en: Deprecated-Predictors

en:
The compress file includes the rster files of the predictors used in the analyses, including the climate, resource availability, land-use and beekeeping intensity metrics.

The raster on the climate contains the PCA axes on the CHELSA variables.
The raster on resource availability contains the PCA axes on plant communities
The raster on land-use contains the land-use composition at 2500 m.
The raster on beekeeping intensity contains thedensity of hives within 2500 m

en: Protected areas

en: Protected areas considered, divided in three groups and rasters: protected areas sensu stricto, protected areas sensu lato and all protected areas

en: Elevation and waterbodies

en: Zip file containing two rasters: the digital elevation model of Switzerland and the waterbodies of Switzerland.

en: Taxonomic and functional metrics in the community plots

en:
Response data used for the modeling.
Lat: latitude community plot
Lon: longitude community plot
Richness: species richness
Shannon: Shannon diversity index
FDis: functional dispersion
TOP: Trait Onion Peeling (functional richness)
TED: Trait Even Distribution (functional evenness)
LCBD_taxo: local community contributions to taxonomic beta diversity
LCBD_fun: local community contributions to functional beta diversity
ITD: community weighted means inter-tegula distance
feeding_specialization: community weighted means feeding specialization
tong_length: community weighted means tongue length
phenostart: community weighted means start of the phenology
phenoduration: community weighted means duration of the phenoloy
cleptoparasite: community weighted means cleptoparasites
belowgound: community weighted means proportion belowground
solitary: community weighted means proportion solitary

en: Spatial environmental predictors and responses

en:
The .zip file contains the rasters of the environmental predictors and the predicted responses:
-  **Environmental predictors.**:

  -  The raster on the climate contains the PCA axes on the CHELSA variables.

  -  The raster on resource availability contains the PCA axes on plant communities

  -  The raster on land-use contains the land-use composition at 2500 m.

  -  The raster on beekeeping intensity contains thedensity of hives within 2500 m

-  **Responses**:
- The predicted responses without masking the waterbodies (Diversity_stack_revised_Selected_descriptors.tif).
- The predicted responses masking the waterbodies (masked.stack.all.diversity.tiff).

en: Wild bee trait data

en: Text file containing the scores of the 8 used traits. The data originates from the European trait database (compiler: Stuart Roberts; pollinator loss module of the EU- FP6 ALARM project).

en: Variable importance, model evaluation, partial dependence plots

en: The compress file containes a set of txt files with the variable importance, the model evaluation metrics and the partial dependence plots of each of the responses used (alpha and beta taxonomic and functional diversity metrics; community weighted means of 8 functional traits)

en:
Raw data supporting the paper "Countrywide wild bee taxonomic and functional diversity reveal a spatial mismatch between alpha and beta-diversity facets across multiple ecological gradients". It contains taxonomic and functional metrics in 3343 community-plots distributed across Switzerland. The calculated metrics are:
- Alpha taxonomic community metrics: species richness and Shannon diversity
- Alpha functional community metrics: Functional richness (using the Trait Onion Peeling index, TOP), functional eveness (using the Trait Even Distribution index, TED) and the functional dispersion.
- Community weighted means of 8 functional traits
- The local community contributions on the functional and taxonomic beta diversity (LCBD).

The dataset also includes the following:
- The used predictors to model the spatial distribution of the community metrics (climate PCA, vegetation PCA, land-use metrics, beekeeping intensity).
-The three types of protected areas, defined according to the protective measures.
- The model evaluation, variable importance and partial dependece data.

anthophila

display_name: anthophila

beta-diversity

display_name: beta-diversity

biodiversity

display_name: biodiversity

climate

display_name: climate

community-indices

display_name: community-indices

elevation-gradient

display_name: elevation-gradient

functional-diversity

display_name: functional-diversity

hymenoptera

display_name: hymenoptera

predictive-modelling

display_name: predictive-modelling

protected-areas

display_name: protected-areas

resource-availability

display_name: resource-availability

switzerland

display_name: switzerland

urbanization

display_name: urbanization

wild-bee

display_name: wild-bee

en: Data on wild bee taxonomic and functional diversity in Switzerland


sensitivity-of-modeled-snow-instability

maintainer: Bettina Richter

title_for_slug: sensitivity-of-modeled-snow-instability

en: snowpack snow-cover-modeling snow-instability global-sensitivity-analysis numerical-avalanche-forecasting

en: Case WL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the period of weak layer formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Case ALL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the whole simulation period. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Reference run

en: Reference run for the sensitivity analysis at Weissfluhjoch field site for winter season 2016-2017. Meteorological data from the automatic weather stations are used. No biases were introduced to the input data.

en: Manually observed snow profiles

en: Manually observed snow profiles at Weissfluhjoch field site for winter season 2016-2017, including layer depth, hand hardness, grain size and grain shape for each layer.

en: Case SL

en: Extracted output data for case SL. Here biases were introduced to meteorological input data during the period of slab formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: We investigated the sensitivity of modeled snow instability to meteorological input data using SNOWPACK. We therefore used input data from the automatic weather station at the Weissfluhjoch field site for the year 2016-2017. We investigated three scenarios and performed 14'000 simulations for each scenario. The dataset contains extracted output data from modeled SNOWPACK simulations, including setup files to reproduce the simulations. For further information read the README file.

global-sensitivity-analysis

display_name: global-sensitivity-analysis

numerical-avalanche-forecasting

display_name: numerical-avalanche-forecasting

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

snowpack

display_name: snowpack

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Sensitivity of modeled snow instability


en: perception-of-ecosystem-services adults-and-teenagers visual-attractiveness nfi-photos online-questionnaire-survey

en: Questionnaire German

en: Codebook to SPSS-file

en: Dataset in csv-format

en: Questionnaire French

en: Questionnaire Italian

en: SPSS-Dataset

en: This questionnaire survey was conducted as an online survey and aimed at investigating the relationship between physical forest characteristics, visual attractiveness of forest and the perception of ecological and cultural ecosystem services in urban forests. Each participant was shown 6 photos out of a pool of 50 photos taken from the Swiss National Forest Inventory (NFI) database. Physical forest characteristics were derived from the photos. The study was conducted as part of the "WaMos meets LFI" (WML) project.

adults-and-teenagers

display_name: adults-and-teenagers

nfi-photos

display_name: nfi-photos

online-questionnaire-survey

display_name: online-questionnaire-survey

perception-of-ecosystem-services

display_name: perception-of-ecosystem-services

visual-attractiveness

display_name: visual-attractiveness

en: Relationship between physical forest characteristics, visual attractiveness and perception of ecosystem services in urban forests


greenland-shrubs-and-microclimate

maintainer: Nathalie Chardon

title_for_slug: greenland-shrubs-and-microclimate

en: field-data arctic accessible-shrub-forest validation climate sdm

en: Nuup Kangerlua

en:
 Collected July-August 2011-2013 (PI: Jacob Nabe-Nielsen)

These data collected July-August 2011-2013 (PI: Jacob Nabe-Nielsen). Please contact J. Nabe-Nielsen (jnn_at_ecos.au.dk) to request access to data on all surveyed shrub species. Available here are only data used in Chardon et al. 2022.

 COLUMN ABBREVIATIONS

 Metadata for 90 m spatial grid

year: sampling year

alt: average altitude of grid as recorded during field surveys [m]

long: WGS84 longitude

lat: WGS84 latitude

x_stere: longitude in Polar Stereographic (EPSG 4326)

y_stere: latitude in Polar Stereographic (EPSG 4326)

 Species presence [1] or absence [0] at grid level

pa_bena: _Betula nana_

pa_sagl: _Salix glauca_

 Shrub species cover (calculated from pin hits in 0.7 x 0.7 m frame, based on total of 25 hits) [%]

cov_bena: _Betula nana_ cover

cov_sagl: _Salix glauca_ cover

 Downscaled climate (time series 1984 – 2013)

tempjja: average maximum June-August temperature [ºC]

tempmax: yearly maximum temperature [ºC]

tempmin: yearly minimum temperature [ºC]

tempcont: yearly maximum – minimum temperature [ºC]

precipmam: cumulative March-May precipitation [mm]

precipjja: cumulative June-August precipitation [mm]

insoljja: average June-August insolation [MJ cm-2 yr-1]

 Topography and terrain wetness (calculated from)

twi: SAGA wetness index (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015)

slope: slope angle (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

asp: aspect (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

tcws: Tasseled Cap Wetness component (Sentinal images)

 Community characteristics

rich: shrub species richness averaged across pin-point frames per grid

shan: Shannon diversity (‘vegan’ package; Oksanen et al. 2019)

comp_bena: shrub competition on Betula nana (i.e. summed cover of non-_B. nana_ species) [% cover]

comp_sagl: shrub competition on Salix glauca (i.e. summed cover of non-_S. glauca_ species) [% cover]

en: GitLab Repository

en: Zip drive of GitLab repository contents (https://gitlab.com/nathaliechardon/gl_microclim).

en: Kangerluarsunnguaq

en:
 Collected August 2020 (PI: Nathalie Isabelle Chardon)

These data collected August 2020 (PI: Nathalie Isabelle Chardon). Please contact N. I. Chardon (nathalie.chardon_at_gmail.com) for individual quadrat (i.e. 1 m x 1 m) data, which are averaged at the 90 m spatial grid here.

 COLUMN ABBREVIATIONS

 Metadata for 90 m spatial grid

id: sampling zone and unique 90 m grid identifier

long: WGS84 longitude

lat: WGS84 latitude

x_stere: longitude in Polar Stereographic (EPSG 4326)

y_stere: latitude in Polar Stereographic (EPSG 4326)

date: sampling day.month.year

 Species presence [1] or absence [0] at grid level

alcr: _Alnus crispa_

bena: _Betula nana_

dila: _Diapensia lapponica_

emni: _Empetrum nigrum_

hahy: _Harimanella hypoides_

lopr: _Loiseleuria procumbens_

oxpa: _Oxycoccus palustre_

phca: _Phyllodoce caerulea_

rhod: _Rhododendron_ sp.

saar: _Salix arctica_

sagl: _Salix glauca_

sahe: _Salix herbacea_

vaul: _Vaccinium uliginosum_

drin: _Dryas integrifolia_

thpr: _Thymus praecox_

 Habitat characteristics [% cover]

shrub: all shrub species

gram: graminoids

forb: forbs

bryo: bryophytes

lich: lichens

litt: litter

bare: bare ground

stone: stones (> 2 cm)

org: organic crust

 Shrub species height (maximum vegetative height) [mm] and cover (estimated in 1x1 m quadrat) [%]

alcr_c: _Alnus crispa_ cover

alcr_h: _Alnus crispa_ height

bena_c: _Betula nana_ cover

bena_h: _Betula nana_ height

dila_c: _Diapensia lapponica_ cover

dila_h: _Diapensia lapponica_ height

emni_c: _Empetrum nigrum_ cover

emni_h: _Empetrum nigrum_ height

hahy_c: _Harimanella hypoides_ cover

hahy_h: _Harimanella hypoides_ height

lopr_c: _Loiseleuria procumbens_ cover

lopr_h: _Loiseleuria procumbens_ height

oxpa_c: _Oxycoccus palustre_ cover

oxpa_h: _Oxycoccus palustre_ height

phca_c: _Phyllodoce caerulea_ cover

phca_height: _Phyllodoce caerulea_ height

rhod_c: _Rhododendron_ sp. cover

rhod_h: _Rhododendron_ sp. height

saar_c: _Salix arctica_ cover

saar_h: _Salix arctica_ height

sagl_c: _Salix glauca_ cover

sagl_h: _Salix glauca_ height

sahe_c: _Salix herbacea_ cover

sahe_h: _Salix herbacea_ height

vaul_c: _Vaccinium uliginosum_ cover

vaul_h: _Vaccinium uliginosum_ height

drin_c: _Dryas integrifolia_ cover

drin_h: _Dryas integrifolia_ height

 Community characteristics

rich_pa: shrub species richness at grid level

rich: shrub species richness averaged across 3 1x1 m sampling quadrats per grid

shan: Shannon diversity (‘vegan’ package; Oksanen et al. 2019)

comp_bena: shrub competition on _Betula nana_ (i.e. summed cover of non-_B. nana_ species) [% cover]

comp_sagl: shrub competition on _Salix glauca_ (i.e. summed cover of non-_S. glauca_ species) [% cover]

ht_cwm: maximum shrub canopy height (i.e. community weighted mean by abundance of maximum shrub height) [mm]

 Topography and terrain wetness (calculated from)

tcws: Tasseled Cap Wetness component (Sentinal images)

slope: slope angle (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

twi: SAGA wetness index (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015)

asp: aspect (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

 Downscaled climate (time series 1984 – 2013)

insoljja: average June-August insolation [MJ cm-2 yr-1]

precipmam: cumulative March-May precipitation [mm]

tempcont: yearly maximum – minimum temperature [ºC]

tempmin: yearly minimum temperature [ºC]

precipjja: cumulative June-August precipitation [mm]

tempjja: average maximum June-August temperature [ºC]

tempmax: yearly maximum temperature [ºC]

en:
 Study Aim

We collected these data to alternatively train and validate high resolution (~ 90 m) Species Distribution Models (SDMs) and Species Abundance Models (SAMs) for _Betula nana_ L. (dwarf birch, Betulaceae) and _Salix glauca_ L. (grey willow, Salicaceae) in Southwest Greenland to assess how well such models can predict local-scale patterns.

 Data Description

Individual (presence-absence, abundance, maximum vegetative height) and community (species composition, maximum canopy height) shrub data for two fjords near Nuuk, Southwest Greenland. Also provided are corresponding downscaled climate data as well as calculated topographic and terrain wetness indicator variables.

 Nuup Kangerlua (Godthåbsfjord)

_Betula nana_ and _Salix glauca_ presence-absence, abundance, community species richness

 Kangerluarsunnguaq (Kobbefjord)

Shrub presence-absence, abundance, maximum vegetative height, community composition, maximum shrub canopy height

 Methods

 Field survey in Nuup Kangerlua

We conducted a stratified systematic plant survey along the length of Nuup Kangerlua (NK) fjord in Soutwesth Greenland (Fig. 1 in Chardon et al. 2022; following Nabe-Nielsen et al., 2017). At five distinct sites, we sampled along elevational gradients to collect data on presences, absences, abundance, and species composition of all woody species using a 0.7 x 0.7 m pin-point frame (Fig. 1e in Chardon et al. 2022). For model training, we converted these pin-point data to percent cover estimates based on the number of pins dropped (n = 25 per plot) and averaged them across the 119 spatio-climatic grids (see next section) corresponding to the plot locations (for details see Appendix S2 in Chardon et al. 2022).

 Field survey in Kangerluarsunnguaq

We conducted a random stratified plant survey in Kangerluarsunnguaq (K) fjord in Southwest Greenland. We used a preliminary Species Abundance Model trained with summed pin counts of _Betula nana_ in NK fjord (see Fig. S1.3 in Chardon et al. 2022) to stratify the ~ 27 x 17 km fjord landscape into low, medium, and high abundances classes. We randomly selected 90 x 90 m spatio-climatic grids to survey in each class for a total of 200 grids, ensuring that they were accessible by foot or boat (for details see Appendix S2 in Chardon et al. 2022). Within each grid, we sampled within three 1 m2 quadrats arranged in a randomly rotated equilateral triangle centered on the mid-point of the cell. We used a gridded sampling quadrat with 1% delineations (Fig. 1h in Chardon et al. 2022) to record woody species presences, absences, and composition, estimated percent cover, and measured maximum shrub species vegetatitve height. At every plot, we also visually scanned the area in a 20 m radius from the plot and recorded the presence of any additional shrub species to estimate grid-level species richness. As in NK fjord, we averaged these data at the grid level (for details see Appendix S2 in Chardon et al. 2022).

 Biotic variables

We calculated biotic microscale variables from the plant survey data collected in NK and K fjords. We calculated shrub species richness, diversity, and competition (i.e. sum of non-B. nana or non-S. glauca pin hits or percent cover). In K fjord, we also calculated canopy height as the community weighted mean (by abundance) of maximum vegetative shrub height.

 Climate variables

We computed high resolution temperature, precipitation, and insolation for local scale data for the study area by statistically downscaling climate time series (1982 - 2013) from the monthly CHELSA data (Karger et al. 2017). We downscaled these data from 30 arc sec (~ 400 m at the latitude of our study) to our target grid size of ~ 90 m with geographic weighted regression and using the MEaSUREs Greenland Ice Mapping Project (GIMP) Digital Elevation Model (DEM) v. 1 (Howat et al., 2014, 2015). We then calculated 30-year averages of the climate parameters: average summer (June – August) maximum temperature, yearly maximum temperature, yearly minimum temperature, temperature continentality (yearly max. - min. temperatures), cumulative Spring (March – May) precipitation, cumulative summer precipitation, and average summer incident solar radiation (henceforth, insolation) (for calculation details see Appendices S2, S3 in Chardon et al. 2022 and Appendix S2 in von Oppen et al. 2021).

 Topography and terrain wetness indicator variables

We calculated several topographic and terrain wetness indices at a local scale. We derived slope, aspect, and the SAGA wetness index (hereafter TWI; Boehner et al., 2002; Boehner and Selige, 2006) from the GIMP DEM. TWI is a measure of how ‘wet’ an area is, based on water drainage from the surrounding landscape. We also calculated the tasseled cap wetness component (hereafter TCW, Crist and Cicone 1984) from satellite images (for details see Appendices S2, S3 in Chardon et al. 2022) as an alternative measure of wetness.

 Computer code

Attached as zip file and available on GitLab (https://gitlab.com/nathaliechardon/gl_microclim)

 Third-party data

Data used to calculate climate, topography, and terrain wetness indicator variables are publicly available (see Appendix S2 in Chardon et al. 2022 for all data references).

accessible-shrub-forest

display_name: accessible-shrub-forest

arctic

display_name: arctic

climate

display_name: climate

field-data

display_name: field-data

sdm

display_name: sdm

validation

display_name: validation

en: Greenland shrubs and microclimate


maintainer: Frank Hagedorn

en: soil-temperature seasons zero-tension-lysimeters dissolved-organic-phosphorus phosphorus nitrogen forest-topsoil nutrient-fluxes beech fertilization

en:
Data on dissolved organic and inorganic phosphorus and nitrogen concentrations in leachates and their corresponding
fluxes from the litter layer, the Oe/Oa horizon, and the A horizon of two German beech forest sites.
Leachate samples were taken in April 2018, July 2018, October 2018, Feb./Mar. 2019, and July 2019
with zero-tension lysimeters after artificial irrigation. Soil samples were taken in July 2019.
For more details please refer to the publication.

beech

display_name: beech

dissolved-organic-phosphorus

display_name: dissolved-organic-phosphorus

fertilization

display_name: fertilization

forest-topsoil

display_name: forest-topsoil

nitrogen

display_name: nitrogen

nutrient-fluxes

display_name: nutrient-fluxes

phosphorus

display_name: phosphorus

seasons

display_name: seasons

soil-temperature

display_name: soil-temperature

zero-tension-lysimeters

display_name: zero-tension-lysimeters

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Phosphorus and nitrogen leaching from beech forest soils


en: hill particles turbulence atmosphere deposition dust snow

en: preferential deposition patterns of all simulations performed

en: The data consist of matlab files. Each files contains a 2D array with the values of deposition at the surface nodes. Each array has Nx x Ny values. Please refer to the original paper for additional information on the spatial resolution and grid size.

en:
Preferential deposition of snow and dust over complex terrain is responsible for a wide range of environmental processes, and accounts for a significant source of uncertainty in surface mass balances of cold and arid regions. Despite the growing body of literature on the subject, previous studies reported contradictory results on the location and magnitude of deposition maxima and minima. This study aims at unraveling the governing processes of preferential deposition in neutrally stable atmosphere and to reconcile seemingly inconsistent results of previous works. For this purpose, a comprehensive modeling approach is developed, based on large eddy simulations of the turbulent airflow, Lagrangian stochastic model of particle trajectories, and immersed-boundary method to represent the underlying topography. The model performance is tested against wind tunnel measurements of dust deposition around isolated and sequential hills. A scale analysis is then performed to investigate the dependence of snowfall deposition on the particle Froude and Stokes numbers, which fully account for the governing processes of inertia, flow advection, and gravity. Additional simulations are performed, to test whether the often used assumption of inertialess particles yields accurate deposition patterns. We finally show that our scale analysis provides qualitatively similar results for hills with different aspect ratios.

This dataset contains the results of the LES-LSM model. Each Matlab file contains a 2D array of deposition values (in kg/m2) in each surface node (ix, iy) of the Cartesian grid. The file names are consistent with the simulation numbers listed in the original paper. For additional information, please refer to "Preferential deposition of snow and dust over hills: governing processes and relevant scales" by F. Comola, M. G. Giometto, S. T. Salesky, M. B. Parlange, and M. Lehning, Journal of Geophysical Research: Atmospheres, 2019.

atmosphere

display_name: atmosphere

deposition

display_name: deposition

dust

display_name: dust

hill

display_name: hill

particles

display_name: particles

snow

display_name: snow

turbulence

display_name: turbulence


en: erosion snow mars sediment-transport model

en: Datasets of Figure 3b

en: Datasets of Figure 4a

en: Datasets of Figure 3a

en: Datasets of Figure 2

en: Datasets of Figure 4b

en:
The files contain the datasets used to produce Figures 2, 3, and 4 of the manuscript ([doi: 10.1002/2016GL071822](http://dx.doi.org/10.1002/2016GL071822)).

 Manuscript Abstract:
Despite being the main sediment entrainment mechanism in aeolian transport, granular splash is still poorly understood. We provide a deeper insight into the dynamics of sand and snow ejection with a stochastic model derived from the energy and momentum conservation laws. Our analysis highlights that the ejection regime of uniform sand is inherently different from that of heterogeneous sand. Moreover, we show that cohesive snow presents a mixed ejection regime, statistically controlled either by energy or momentum conservation depending on the impact velocity. The proposed formulation can provide a solid base for granular splash simulations in saltation models, leading to more reliable assessments of aeolian transport on Earth and Mars.

erosion

display_name: erosion

mars

display_name: mars

model

display_name: model

sediment-transport

display_name: sediment-transport

en: Energy- and momentum-conserving model of splash entrainment in sand and snow saltation


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: meteorological-measurements meteo-station davos dischma-catchment soil-moisture

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

en: IRKIS Soil moisture measurements Davos


en: sea-ice-elevation sea-ice terrestrial-laser-scans tls polar

en: Data processing documentation

en: Post Processed TLS's

en: Compressed dat files

en: Link to post-processed TLS’s of Antarctic sea ice

en:
This dataset comprises of a post-processed set of terrestrial laser scans (TLS’s) of Antarctic sea ice obtained during the Sea Ice Physics and Ecosystem Experiment-2 (SIPEX-2, http://seaice.acecrc.org.au/sipex2012/) in September-November 2012. The post-processing steps include the registration of the individual scans into a single 3-dimensional point cloud, the removal of unwanted noise caused by particles in the air (i.e., snow crystals), and the final generation of surface grids based on the cleaned individual point returns. The final product includes the ‘xyz’ coordinates of the individual point measurements, and gridded surfaces covering study areas of 100m x 100 m, and at resolutions of 0.01 m, 0.1 m, 0.25 m, 0.5 m and 1 m for each of the survey dates. Additionally, subgrid statistics that include the mean elevation, standard deviation, minimum and maximum elevations, range, and number of point returns in each gridcell are generated. The final product is provided in space-delimited text files, with the surface grids provided in Digital Terrain Model (DTM) format ready for visualization in any GIS software.

How to cite:
Please also cite the original publication when using this data set.: Trujillo, E., K. Leonard, T. Maksym, and M. Lehning (2016), Changes in snow distribution and surface topography following a snowstorm on Antarctic sea ice, J. Geophys. Res. Earth Surf., 121, doi:[10.1002/2016JF003893](https://dx.doi.org/10.1002/2016JF003893).

polar

display_name: polar

sea-ice

display_name: sea-ice

sea-ice-elevation

display_name: sea-ice-elevation

terrestrial-laser-scans

display_name: terrestrial-laser-scans

tls

display_name: tls

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: High resolution sea ice surface topography from the SIPEX-2 expedition, East Antarctica, 2012


disdrometer-data-davos-wolfgang

title_for_slug: disdrometer-data-davos-wolfgang

en: raclets davos fall-velocity precipitation disdrometer

en: Disdrometer Data Davos Wolfgang

en:
The zip folder contains one netCDF file per day for Davos Wolfgang from February 8 to March 19 2019 with a temporal resolution of 30 seconds (time in UTC) and includes:

- characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...)
- precipitation rate
- radar reflectivity
- visibility range
- weather codes
- instrument performance

en: The dataset contains information on precipitation amount and type for Davos Wolfgang (LON: 9.853594, LAT: 46.835577) from February 8 to March 19 2019. It includes: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

disdrometer

display_name: disdrometer

fall-velocity

display_name: fall-velocity

precipitation

display_name: precipitation

raclets

display_name: raclets


en: climate-change-impact snow-water-equivalent rain-on-snow natural-climate-variability cryosphere uncertainty

en: climate realizations

en: The dataset contains for three variables (snow water equivalent, surface water input and liquid precipitation) 50 realizations of current and future climate periods for two time horizons (mid end end of century), two emission senarions (RCP 4.5 and 8.5) and 10 climate model chains (all EUR11 chains within CH2018). To quantify natural climate variability for projections of snow conditions and resulting rain-on-snow (ROS) flood events, a weather generator was applied to simulate inherently consistent climate variables for multiple realizations of current and future climates at 100 m spatial and hourly temporal resolution over a 12 x 12 km high-altitude study area in the Swiss Alps. The output of the weather generator was used as input for subsequent simulations with an energy balance snow model. The data was extracted in 2021 from original model output.

climate-change-impact

display_name: climate-change-impact

cryosphere

display_name: cryosphere

natural-climate-variability

display_name: natural-climate-variability

rain-on-snow

display_name: rain-on-snow

snow-water-equivalent

display_name: snow-water-equivalent

uncertainty

display_name: uncertainty

en: Multiple realizations of daily snow water equivalent, surface water input and liquid precipitation projections for mid- and late-century


maintainer: Joan Casanelles Abella

en: angiospermae plants urban poznan paris tartu antwerp floral-resources zurich floral-inventories

en: List of plant species sampled in the five cities (Antwerp, Paris, Poznan, Tartu and Zurich) during the different sampling perionds (four for Zurich, three for the other cities) with their frequency (oc1-oc16) within a 100 m radius

en: Trait values for the sampled plants

en: Floral units, mean number of flowers per floral unit and floral abundance of the different plants counted in quadrats in the study sites in Zurich during the four sampling periods

en: Data of a survey of flowering plants in 80 sites in five European cities and urban agglomerations (Antwerp, Belgium; greater Paris, France; Poznan, Poland; Tartu, Estonia; and Zurich, Switzerland) sampled between April and July 2018.

angiospermae

display_name: angiospermae

antwerp

display_name: antwerp

floral-inventories

display_name: floral-inventories

floral-resources

display_name: floral-resources

paris

display_name: paris

plants

display_name: plants

poznan

display_name: poznan

tartu

display_name: tartu

urban

display_name: urban

zurich

display_name: zurich

en: Flowering Plants (Angiospermae) in Urban Green Areas in five European Cities


maintainer: Yohann Chauvier

en: independent-dataset environmental-stratification target-group covariate-correction survey-effort plant-species point-process-model background-data cluster random-stratified-sampling

en: Non-copyright data, scripts, diversity outputs

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models