maintainer: Marco Moretti

en: zurich honeybees pollinator-experiment urban-ecosystems beekeeping city4bees wild-bees urbanization gardens urban-biodiversity bettergardens resource-availability

en: Response and predictors used for the SEMs

en:
Mean, standard deviation , minimum and maximum values of six functional traits. The data has the following structure:
- Bee_species: bee scientific name
- mean_trait: mean value
- sd_trait: standard deviation
_min_trait: minimum value
- max_trait: maximum value
- trait: the six traits used. ITD = Intertegular distance (mm); Pheno.duration = duration of the phenology; Pheno.start = start of the phenology; Pheno.end = end of the phenology; Rel.tongue.length= relative tongue length (mm); Daytime.activity = daily activity (h)
DistNichePart: functional dissimilarity in a multidimentional trait space defined by five traits between wild bee individuals of a wild bee species and the honeybee individuals. Values are at the species level.

en: Metadata for the predictor and response dataset

en:
The data contains the following columns:

  SiteID: numeric, the identity of the garden where the bee was sampled.
  Taxonname: character, species name
  Lecty: numeric discreet, a mesure of specialisation degree. Levels: 1 = monolectic; 2=oliolectic; 3=polilectic
  Pheno.start= numeric discreet, the starting week of the flying activity.
  Pheno.end= numeric discreet, the ending week of the flying activity.
  Pheno.duration=numeric discreet, Pheno.end - Pheno.start
  Daytime.activity = numeric continuous, individual-level measure of the day hour when the bee was sampled
  ITD = numeric continuous, individual-level measure of the InterTegular Distance, a metric of mobility in mm.
  Rel.tongue.length =numeric continuous, individual-level measure of the relative tongue length (Tongue length / ITD), a metric of specilaisation degree, in mm.

en: Metadata for the predictors and response dataset

en:
Cities are socio-ecological systems that filter and select species, thus establishing unique species assemblages and biotic interactions. Urban ecosystems can host richer wild bee communities than highly intensified agricultural areas, specifically in resource-rich urban green spaces such as allotment and family gardens. At the same time, urban beekeeping has boomed in many European cities, raising concerns that the fast addition of a large number of managed bees could deplete the existing floral resources, triggering competition between wild bees and honeybees. The data has been used to investigated the interplay between resource availability and the number of honeybees at local and landscape scales and how this relationship influences wild bee diversity.

This dataset contains the raw and processed data supporting the findings from the paper: "Low resource availability drives feeding niche partitioning between wild bees and honeybees in a European city".

The data contains:
1. Bee trait measurements at the species and individual-level of five functional traits.
2. The values of the feeding niche partitioning (functional dissimilarity to honeybees)
3. The predictors of resource availability and beekeeping intensity at local and landscape scales used in the modelling of the paper for the 23 experimental sites.

beekeeping

display_name: beekeeping

bettergardens

display_name: bettergardens

gardens

display_name: gardens

honeybees

display_name: honeybees

pollinator-experiment

display_name: pollinator-experiment

resource-availability

display_name: resource-availability

urban-biodiversity

display_name: urban-biodiversity

urban-ecosystems

display_name: urban-ecosystems

urbanization

display_name: urbanization

wild-bees

display_name: wild-bees

zurich

display_name: zurich

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Niche partitioning between wild bees and honeybees


maintainer: EnviDat Support

en: cosmo-wrf complex-terrain snow-precipitation precipitation-variability orographic-precipitation

state: active

type: dataset

media_type: application/zip

en: Snow depth maps over Dischma valley for 26 January 2016 and 9 March 2016 and snow depth differences between the two dates.

format: ZIP

mimetype: application/zip

en: StationData

en:
The data presented here corresponds to the publication "Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain" (Gerber et al., 2018a), which investigates the precipitation variability of snow precipitation in the central northern part of the Grisons (CH) and the publication "The importance of near-surface winter precipitation processes in complex alpine terrain" (Gerber et al., 2018b). The dataset contains:

* WRFsimulations: WRF simulation output for simulations with 4x (14x) terrain smoothing with an output timestep of 30 min/5 min and horizontal grid spacings of 1350 m, 450 m, 150 m and 50 m (currently: data available upon request).
* StationData: Meteorological station data of 18 meteorological stations in the central northern part of the Grisons with 30 minute resolution for the period 1 January 2016 till 1 May 2016.
* ADS80data: Photogrammetrically determined snow depth distribution data over the Dischma valley for the 26 January 2016 and 9 March 2016. Snow heights are corrected for buildings, vegetation (> 1m), outliers, and pixles, which are obivously snow-free on the pictures (Bühler et al., 2015). In addition the snow depth differences (snow depth on 9 March 2016 minus snow depth on 26 January 2016) are provided.

For more details about the simulation and observation data, see Gerber et al., 2018 and Gerber and Sharma (2018).

Publications:

Bühler, Y., Marty, M., Egli, L., Veitinger, J., Jonas, T., Thee, P., and Ginzler, C.: Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9, 229–243, doi:10.5194/tc-9-229-2015, 2015.

Gerber, F., Besic, N., Sharma, V., Mott, R., Daniels, M., Gabella, M., Berne, A., Germann, U., and Lehning, M.: Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain, The Cryosphere, 12, 3137–3160, doi:10.5194/tc-12-3137-2018, 2018.

Gerber, F., Mott, R. and Lehning, M.: The importance of near-surface winter precipitation processes in complex alpine terrain, Journal of Hydrometeorology, accepted, 2018.

Gerber, F., and Sharma, V.: Running COSMO-WRF on very-high resolution over complex terrain. Laboratory of Cryospheric Sciences CRYOS, École Polytechnique Fédérale de Lausanne EPFL, Lausanne, Switzerland. doi:10.16904/envidat.35, 2018.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

orographic-precipitation

display_name: orographic-precipitation

precipitation-variability

display_name: precipitation-variability

snow-precipitation

display_name: snow-precipitation

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: DISCHMEX - High-resolution WRF simulations in complex alpine terrain and station measurements


soil-respiration-exclosure-experiment

title_for_slug: soil-respiration-exclosure-experiment

en: grazing subalpine soil-respiration grassland ungulates

en: Soil respiration Switzerland

en:
ID: Fence number

Year	:Year of sampling

mean.CO2: soil respiration measured with PP-systems SRC-1 soil respriation chamber attached to a EGM-4 infrared gas analyser; units CO2 g m-2 h-1

Grassland: Grasslands where fences were errected. Note that on large grasslands (STAB, GRIM, MING) 2 pairs of fences were errected (2 in short, 2 in tall-grass vegetation), on small grasslands (DADA, MARG, BOTS) only one pair of fences was errected (1 short-grass; one-tallgrass vegetation)

Fence: Fence number; un-even numbers on short-grass vegetation (1,3,5,7,9,11,13,15,17), even numbers on tall-grass vegetation (2,4,6,8,10,12,14,16,18)

Vegetation:	1 = shortgrass vegetation, 2 = tall-grass vegetation (9 replicate fences on each vegetation type)

Treatment	: 1 = all herbivores grazing, 2 = large ungulates (red deer, chamois) excluded

format: XLS

en:
Location of data collection
The Swiss National Park (SNP) is located in the southeastern part of Switzerland, and covers an area of 170 km2, 50 km2 of which is forested, 33 km2 is occupied by alpine and 3 km2 by subalpine grasslands. Elevations range from 1350 to 3170 m a.s.l., and mean annual precipitation and temperature are 871 mm and 0.6°C measured at the Park’s weather station in Buffalora (1980 m a.s.l.) between 1960 and 2009 (MeteoSchweiz 2011). Founded in 1914, the SNP received minimal human disturbance for almost 100 years (no hunting, fishing, or camping, visitors are not allowed to leave the trails). Large (> 1 ha) homogeneous patches of short- and tall-grass vegetation characterize the subalpine grasslands. The average vegetation height of short-grass vegetation is 2 to 5 cm. Red fescue (Festuca rubra L.), quaking grass (Briza media L.) and common bent grass (Agrostis tenuis Sipthrob) are the predominating plant species in this vegetation type. Tussocks of evergreen sedge (Carex sempervirens Vill.) and mat grass (Nardus stricta L.) are predominant in the tall-grass vegetation, which averages 20 cm in vegetation height (Schütz and others 2006). Short-grass vegetation developed in areas where cattle and sheep rested (high nutrient input) during agricultural land-use (from 14th century until 1914); tall-grass vegetation developed in areas where cattle and sheep used to graze, but did not rest (Schütz and others 2003, 2006). Herbivores were shown to consume > 60% of the biomass in short-grass compared to < 20% in tall-grass vegetation (Schütz and others 2006). The herbivore community present in the SNP can be divided into four groups based on body size/weight: large [red deer (Cervus elaphus L.) and chamois (Rupricapra rupricapra L.); 30 - 150 kg], medium [marmot (Marmota marmota L.) and snow hare (Lepus timidus L.); 3 – 6 kg], and small vertebrate herbivores (small rodents: e.g. Clethrionomys spp., Microtus spp., Apodemus spp.; 30 – 100 g) as well as invertebrates (e.g. grasshoppers, caterpillars, cicadas, < 5 g).

Experimental design
We selected 18 subalpine grassland sites (9 short-grass, 9 tall-grass vegetation). The sites were spread across the entire park on dolomite parent material at altitudes of 1975 to 2300 meters. At each site we established an exclosure network (fences) in spring 2009 (early June), immediately after snowmelt. Each exclosure network consisted of a total of five 2 × 3 m sized plots that progressively excluded the different herbivores listed above (further labeled according to the herbivore guilds that had access to the respective plots “All”, “Marmot/Mice/Invertebrates”, “Mice/Invertebrates”, “Invertebrates”, “None”). The “All” treatment was thus accessible to all herbivores, was not fenced and was located at least 5 m away from a 2.1 m tall and 7 × 9 m main fence that enclosed the other four treatments. This fence was constructed of 10 × 10 cm wooden posts and electrical equestrian tape (AGRARO ECO, Landi, Bern, Switzerland; 20 mm width) mounted at 0.7 m, 0.95 m, 1.2 m, 1.5 m and 2.1 m above the ground that were connected to a solar charged battery (AGRARO Sunpower S250, Landi, Bern, Switzerland). We also mounted non-electrically charged equestrian tape at 0.5 m to help exclude deer and chamois, yet allow marmots and hares to enter safely. Within each main fenced area we randomly established four 2 × 3 m plots: (1) The “Marmot/Mice/Invertebrates” plot remained unfenced, thus, with the exception of red deer and chamois, all herbivores were able to access the plot, (2) The “Mice/Invertebrates” plot consisted of a 90 cm high electric sheep fence (AGRARO Weidezaunnetz ECO, Landi, Bern, Switzerland; mesh size 10 × 10 cm) connected to the solar panel and excluded all medium sized mammals (marmots, hares), but provided access for small mammals and invertebrates, (3) The “Invertebrates” plot provided access for invertebrates only and was surrounded by 1 m high metal mesh (Hortima AG, Hausen, Schweiz; mesh size 2 × 2 cm), (4) The “None” plot was surrounded by a 1 m tall mosquito net (Sala Ferramenta AG, Biasca, Switzerland; mesh size 1.5 × 2 mm) to exclude all herbivores. This plot was covered with a roof constructed of a wooden frame lined with mosquito mesh that was mounted on the wooden corner posts. We also treated this plot with a biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) when needed to remove insects that might have entered during data collection or that hatched from the soil.

!!! The here published data set only contains data for “All”, and “Marmot/Mice/Invertebrates” (= ungulates excluded) plots !!!

Data collection
In-situ soil CO2 emissions were measured with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA) on two randomly selected locations on one subplot within each of the 90 plots. For each measurement the soil chamber (15 cm high; 10 cm diameter) was placed on a permanently installed PVC collar (10 cm diameter) driven five centimeters into the soil at the beginning of the study (June 2009). The measurements were conducted between 0900 and 1700 hours every two weeks from early to early September 2009, 2010, 2011 and 2013. Freshly germinated plants growing within the PVC collars were removed prior to each measurement to avoid measuring plant respiration/photosynthesis. The two measurements collected per plot every two weeks were averaged.

Please acknowledge the funding of the study: funded by the Swiss National Science Foundation, SNF grant-no 31003A_122009/1 to Anita C. Risch, Martin Schütz and Flurin Filli

grassland

display_name: grassland

grazing

display_name: grazing

soil-respiration

display_name: soil-respiration

subalpine

display_name: subalpine

ungulates

display_name: ungulates

en: Soil respiration - exclosure experiment


maintainer: Elisabeth Hafner

en: avalanche-mapping avalanche-size-estimation reliability avalanche remote-sensing

en: AvalancheReliabilityData

en: The .zip contains all data used to conduct the reliability study as well as the results, a detailed description of the included files is contained in the included pdf. All geospatial data is provided in the Swiss Coordinate System: CH1903+ / LV95 (EPSG 2056). For any use of the data the proper citation provided is obligatory!

format: SERVICE

mimetype: application/x-zip-compressed

en:
This dataset contains the data used and collected to investigate the reliability of avalanche size estimates and avalanche outlines (see related publications). Namely this is

 Avalanche size estimates

* the 10 pictures depicting avalanches
* the survey results from the 170 participants

 Avalanche outlines mapped from oblique photographs
* the pictures of the six avalanches
* the avalanche outlines mapped by the 10 participants
* the reference mapped from the georeferenced photographs

 Avalanche outlines from remotely-sensed imagery
* the orthophotos in the four different resolutions (2m, 1m, 50cm, 25cm)
* the area of interest (AoI) delimiting the research area
* the avalanche mappings in each resolution for all five participants
* the shade masks used to separate illuminated and shaded areas

The acquisition of the orthophotos has been partially supported by the Swiss National Science Foundation (SNF; Grant N°200021_172800).

avalanche

display_name: avalanche

avalanche-mapping

display_name: avalanche-mapping

avalanche-size-estimation

display_name: avalanche-size-estimation

reliability

display_name: reliability

remote-sensing

display_name: remote-sensing

en: Data reliability study: avalanche size estimates and outlines


maintainer: Sven-Eric Hopf

en: monitoring iap fraxinus forest ash-dieback

en: Monitoring of ash trees as part of the Intercantonal Forest Observation Programme

en: Packgroun information on data for the publication: Spread and Severity of Ash Dieback in Switzerland – Tree Characteristics and Landscape Features Explain Varying Mortality Probability, (Klesse et al. 2021, Front. For. Glob. Change 4:645920., doi: 10.3389/ffgc.2021.645920)

en:
In 2013, the Institute for Applied Plant Biology (IAP) started a monitoring programme to study the development and the spatial variation of the ash dieback disease with the aim to find some partially resistant European ash trees (Fraxinus excelsior).
We collaborate as co-authors for the publication: Spread and Severity of Ash Dieback in Switzerland - Tree Characteristics and Landscape Features Explain Varying Mortality Probability (Klesse et al. 2021 in frontiers)

ash-dieback

display_name: ash-dieback

forest

display_name: forest

fraxinus

display_name: fraxinus

iap

display_name: iap

monitoring

display_name: monitoring

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: James W. Kirchner

en: catchment precipitation stable-water-isotopes deuterium streamflow tracer plynlimon chloride

en: 7-hourly stable water istopes

media_type: text/plain

en: Data set of 7-hourly stable water isotope data measured at Carreg Wen (precipitation) and Upper Hafren (streamflow).

format: TXT

mimetype: text/plain

en: Data Set Documentation

media_type: application/pdf

en: This file contains a documentation of the data sets, including references to other helpful documentations.

format: PDF

mimetype: application/pdf

en: Weekly stable water isotopes

en: Data set of weekly stable water isotope data collected at Carreg Wen (precipitation) and Lower Hafren and Tanllwyth (streamflow).

en: The data base contains timeseries of stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK. One data set contains weekly stable water isotope data from the Lower Hafren and Tanllwyth catchments, and the other data set contains 7-hourly stable water isotope data from Upper Hafren. Both data sets also include chloride concentrations in precipitation and streamflow.

catchment

display_name: catchment

chloride

display_name: chloride

deuterium

display_name: deuterium

plynlimon

display_name: plynlimon

precipitation

display_name: precipitation

stable-water-isotopes

display_name: stable-water-isotopes

streamflow

display_name: streamflow

tracer

display_name: tracer

en: Stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK


en: precipitation wind-speed swiss-forest-lab climate-change meteorology meteo par temperature long-term relative-humidity

en: Forest station data (LEB)

media_type: text/csv

en: Data file.

format: CSV

mimetype: text/csv

en: Site photo of the forest station (LEB)

en: Site photo of the forest station from below (viewing upwards the slope)

mimetype: image/jpeg

en: Data plot of the forest station (LEB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for one meteorological station in Lens in Switzerland which is located within a natural coniferous forest with Scots pine (_Pinus sylvestris_; 150-170 yrs)) as dominant tree species. The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Lens is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Lens, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Frank Techel

en: avalanche-size machine-learning natural-avalanches avalanche snowpack-model

en: Data set DL was used for validation of the avalanche-day classifier and the avalanche-size estimator. The data set contains the quality-checked danger levels merged with the respective SNOWPACK simulations (Sections 2.3 and 3.3(2) in Mayer et al.).

en: Data set AV3 was used for validation of the avalanche-day classifier (Sections 2.1.3 and 3.3(1) in Mayer et al.).

en: Data set AV1 was used for training the avalanche-day classifier (Sections 2.1.1, 2.2, and 3.1 in Mayer et al.).

en: Data set AV2 used for training the avalanche-size estimator (Sections 2.1.2 and 3.2 in Mayer et al.)

en:
The data set contained in this repository was used in the analysis by Mayer et al. (2023):
Mayer, S. I., Techel, F., Schweizer, J., and van Herwijnen, A.: Prediction of natural dry-snow avalanche activity using physics-based snowpack simulations, EGUsphere, https://doi.org/10.5194/egusphere-2023-646, 2023.

avalanche

display_name: avalanche

avalanche-size

display_name: avalanche-size

machine-learning

display_name: machine-learning

natural-avalanches

display_name: natural-avalanches

snowpack-model

display_name: snowpack-model

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data-set for prediction of natural dry-snow avalanche activity and avalanche size using physics-based snowpack simulations


radiosondes

maintainer: Jörg Wieder

title_for_slug: radiosondes

en: wind-direction wind relative-humidity pressure radiosonde temperature holoballoon raclets

en: Radiosond Template Files

en:
The "template" files contain standard parameters, i.e. ambient pressure (mbar and Pa), temperature (°C), relative humidity (%), wind speed (m s‾ ¹) and wind direction (true deg), as well as additional information, e.g. time (UTC and local time), dew point (°C), mixing ration (g/kg), density (kg m³), altitude (m MSL), height above ground (ft and m AGL), and geographic coordinates (longitude, latitude). If the wind speed was zero, no wind direction is given.
The zip files contain ascents on the following days:
February 10 (morning and afternoon),
February 11 (morning),
February 16 (afternoon),
February 22 (morning),
March 1 (morning),
March 5 (morning),
March 11 (morning),
March 12 (morning),
March 13 (morning),
March 14 (morning),
March 17 (afternoon), and
March 18.
The data was managed with Windsond Receiver Application Demo Version 2.92, (C) Sparv Embedded AB 2016.

en: Radiosond Sounding Files

en:
The "soundings" radiosond data contains information on ambient pressure (mbar), temperature (C), relative humidity (%), wind speed (m s‾ ¹) and wind direction (true deg), and are ordered with respect to the height above ground (m AGL) with a step size of 20 m. The first line of each file idicates the geographic location and the start time (in UTC) of the ascent. If the wind speed was zero, no wind direction is given.
The zip files contain ascents on the following days:
February 10 (morning and afternoon),
February 11 (morning),
February 16 (afternoon),
February 22 (morning),
March 1 (morning),
March 5 (morning),
March 11 (morning),
March 12 (morning),
March 13 (morning),
March 14 (morning),
March 17 (afternoon), and
March 18.
The data was managed with Windsond Receiver Application Demo Version 2.92, (C) Sparv Embedded AB 2016.

en: Radiosondes (Windsond, Sparv Embedded AB) were started in Davos Wolfgang (LON: 9.853594, LAT: 46.835577) to report height profiles of pressure, relative humidity and temperature at specific days. In addition to regular launches of radiosondes, sondes were attached to [HoloBalloon](https://www.envidat.ch/group/clouds-in-situ-raclets) to report the ambient conditions of the in-situ measurements. Further profiles of meteorological measures were recorded at [HoloGondel](https://www.envidat.ch/group/clouds-in-situ-raclets) which was installed at the gondola moving between Gotschnaboden and Gotschnagrat at 2285 m a.s.l.

holoballoon

display_name: holoballoon

pressure

display_name: pressure

raclets

display_name: raclets

radiosonde

display_name: radiosonde

wind

display_name: wind

wind-direction

display_name: wind-direction

en: Radiosondes


maintainer: Ueli Reber

en: biodiversity policy-documents policy-analysis switzerland text-corpus bgb environmental--policy

en: Replication files

en:
 Introduction

The ZIP file contains all data and code to replicate the analyses reported in the following paper.

Reber, U., Fischer, M., Ingold, K., Kienast, F., Hersperger, A. M., Grütter, R., & Benz, R. (2022). Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics. *Policy Sciences*. [https://doi.org/10.1007/s11077-022-09456-4](https://doi.org/10.1007/s11077-022-09456-4)

If you use any of the material included in this repository, please refer to the paper. If you use (parts of) the text corpus, please also refer to the sources used for its compilation listed below. The content of the texts may not be changed.

 Data folder

The data folder contains the following files.

* _corpus.parquet_: Text corpus of Swiss policy documents
* _dict_de.csv_: Biodiversity dictionary (German)
* _dict_fr.csv_: Biodiversity dictionary (French)
* _dict_it.csv_: Biodiversity dictionary (Italian)
* _topic_labels.csv_: labels/codes for policy sectors
* _topics.csv_: labels/codes for policy sectors

The corpus and the dictionary were compiled by the authors specifically for this project. The labels/codes for policy sectors are based on the [coding scheme](http://ws-old.parlament.ch/affairs/topics) of the Swiss Parliament.

 Text corpus

The text corpus consists of 439,984 Swiss policy documents in German, French, and Italian from 1999 to 2018. The corpus was compiled from the following source between 2020-10-01 and 2021-01-31.

* Transcripts and parliamentary businesses (e.g. questions, motions, parliamentary initiatives) via the [Web Services (WS)](https://www.parlament.ch/de/%C3%BCber-das-parlament/fakten-und-zahlen/open-data-web-services) provided by the Swiss Parliament
* The official compilation of federal legislation ("Amtliche Sammlung", AS) via [opendata.swiss](https://opendata.swiss/de/dataset/official-compilation-of-federal-legislation-bs-as-1947-2018) provided by the Swiss Federal Archives (SFA)
* The federal gazette ("Bundesblatt") via [fedlex.admin.ch](https://www.fedlex.admin.ch/de/fga/index)
* Decisions of federal courts via [entscheidsuche.ch (ES)](https://entscheidsuche.ch/)

The corpus is stored in a single data frame to use with R saved as [PARQUET](https://parquet.apache.org/) file (corpus.parquet). The data frame has the following structure.

* _text_id_: Unique identifier for each text (source information as prefix, e.g. "t_")
* _doc_type_: Document type (see coding scheme below)
* _branch_: Government branche (1 legislative, 2 executive, 3 judicative)
* _stage_: Stage of policy process (1 drafting, 2 introduction, 3 interpretation)
* _year_: Year of publication
* _topic_: Policy sector (coding scheme in separate file in data folder)
* _lang_: Language (de, fr, it)
* _text_: Text

The following list contains the coding scheme for the doc_type variable.

* 101: Federal gazette // Draft for public consultation ("Vernehmlassungsverfahren")
* 102: Federal gazette // Explanation of draft for parliament ("Botschaft")
* 103: Federal gazette // Strategy, action plan
* 104: Federal gazette // Federal council decree ("Bundesratsbeschluss")
* 105: Federal gazette // (Simple) Federal decree ("(Einfacher) Bundesbeschluss")
* 106: Federal gazette // General decree ("Allgemeinverfügung")
* 107: Federal gazette // Treaty ("Übereinkommen")
* 108: Federal gazette // Treaty ("Abkommen")
* 109: Federal gazette // Draft for parliament ("Entwurf")
* 110: Federal gazette // Report ("Bericht")
* 111: Federal gazette // Report of parliamentary comission ("Bericht")
* 112: Federal gazette // Report of federal council ("Bericht")
* 201: Parl. businesses // Submitted text
* 202: Parl. businesses // Reason text
* 203: Parl. businesses // Federal council response
* 204: Parl. businesses // Initial situation
* 205: Parl. businesses // Proceedings
* 301: Parl. transcripts // Speech of MP
* 302: Parl. transcripts // Speech of federal council
* 401: Federal legislation // Legal text of the official compilation (law, ordinances, etc.)
* 501: Court decisions // Federal Supreme Court
* 502: Court decisions // Federal Criminal Court
* 503: Court decisions // Federal Administrative Court

 Code folder

The code folder contains all R code for the analyses. The files are numbered chronologically.

* _1_classifier_training.R_: Training of classifiers for classification of policy sectors
* _2_classifier_application.R_: Classification of documents in corpus
* _3_dictionary_application.R_: Biodiversity indexing of documents in corpus
* _4_stm_truncation.R_: Truncation of indexed documents to keep only relevant parts
* _5_stm_translation.R_: Translation of FR and IT documents to DE
* _6_stm_model.R_: Preprocesssing and structural topic model
* _7_plots.R_: Plots and numbers as included in the paper

The code/functions folder contains custom functions used in the scripts, e.g. to support topic model interpretation.

Package versions and setup details are noted in the code files.

 Contact

Please direct any questions to Ueli Reber (ueli.reber@eawag.ch).

bgb

display_name: bgb

biodiversity

display_name: biodiversity

environmental--policy

display_name: environmental--policy

policy-analysis

display_name: policy-analysis

policy-documents

display_name: policy-documents

switzerland

display_name: switzerland

text-corpus

display_name: text-corpus

en: Replication files for "Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics"


intratrait

maintainer: Christian Rixen

title_for_slug: intratrait

en: plant-traits neighbour-interactions elevation-range climate-change cold-adapted-plants elevation-gradient

en: Plant trait data along elevation gradients on mountains

en:
This data set was used to test whether species specialized to high elevations or with narrow elevational ranges show more conservative (i.e. less variable) trait responses across their elevational distribution, or in response to neighbours, than species from lower elevations or with wider elevational ranges. We did so by studying intraspecific trait variation of 66 species along 40 elevational gradients in four countries (Switzerland, Australia, New Zealand, China) in both hemispheres. As an indication of potential neighbour interactions that could drive trait variation, we also analysed plant species’ height ratio, its height relative to its nearest neighbour.
The following traits and parameters were measured and are available in this data set:
As an indication of plant stature, we measured vegetative and generative height, where vegetative height was distance from soil to highest vegetative leaf and generative height was distance to the highest point on the reproductive shoot. As a measure of reproductive investment, we noted the presence of flowers on the randomly chosen individuals (see below). As a measure of individual and genet basal area, we measured individual plant and patch diameters, in two dimensions (along the largest diameter and perpendicular to it). In clonal plant species, plant diameter was equivalent to an individual rosette, whereas patch diameter referred to the whole genet and could represent the size of a tuft, tussock or cushion. For genera with more singular growth forms (e.g., some Gentiana species) plant and patch diameter were the same. The two diameter measurements were made at right angles, allowing estimates of patch and plant areas to be calculated as an ellipse (i.e., area = 0.5 a 0.5 b Π). All traits were measured on ten randomly selected individuals per site. Flower count data was considered in a binary fashion on a per individual basis (because for some species individuals only produce one flower when flowering) so that the presence or absence of flower(s) was a nominal value between 0 and 10 for each species at each site. We then collected at least three leaves (up to 30 for small and light leaves) from each of the first three individuals selected from each species for determination of leaf dry matter content (LDMC) and specific leaf area (SLA). For calculations of LDMC and SLA, fresh leaves were scanned on a flatbed scanner to determine leaf area. Leaves were then weighed on a balance to a precision of +/- 0.001g, prior to being air dried and reweighed with a balance to a precision of +/- 0.0001g. LDMC was calculated by dividing dry leaf mass by fresh leaf mass. SLA was calculated by dividing leaf area by dry leaf mass. Additionally, within an area of 10 cm diameter around the target individual, we determined the tallest neighbouring species and measured its vegetative and generative height, and estimated the percent cover of the target species, other vegetation, rock, and bare soil.
For more details see Rixen et al. 2022, Journal of Ecology.

climate-change

display_name: climate-change

cold-adapted-plants

display_name: cold-adapted-plants

elevation-gradient

display_name: elevation-gradient

elevation-range

display_name: elevation-range

neighbour-interactions

display_name: neighbour-interactions

plant-traits

display_name: plant-traits

en: intratrait


weather-station-klosters

maintainer: Maxime Hervo

title_for_slug: weather-station-klosters

en: raclets temperature precipitation klosters wind weather

en: Weather Station Klosters

en: All in one weather station measuring temperature (°C), humidity (%), wind (m s‾ ¹) and precipitation type. The time format is: number of days from January 0, 0000, UTC.

en: A weather station (Lufft WS600) measured meteorological parameters at Klosters (LON: 9.880413, LAT: 46.869019). Detailed information on the specifications can be found [here](https://www.lufft.com/products/compact-weather-sensors-293/ws600-umb-smart-weather-sensor-1832/productAction/outputAsPdf/).

klosters

display_name: klosters

precipitation

display_name: precipitation

raclets

display_name: raclets

temperature

display_name: temperature

weather

display_name: weather

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


wind-lidar-davos-wolfgang

title_for_slug: wind-lidar-davos-wolfgang

en: lidar raclets wind profiles wolfgangpass

en: Wind LIDAR data Wolfgang

en: A Leosphere WidCube 100S was deployed at Davos Wolfang, measuring wind profiles as well as performing PPI and RHI scans. Time format is in UTC with highest time resolution of 5 seconds.

en: Scanning wind Lidar from Meteoswiss was installed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577) and measured from 200 m above ground to 8100 m. The time resolution is up to 5 seconds. The Lidar was measuring wind profiles but also performed plan position indicator (PPI) and range height indicator (RHI) scans.

lidar

display_name: lidar

profiles

display_name: profiles

wind

display_name: wind

wolfgangpass

display_name: wolfgangpass

en: Wind LIDAR Davos Wolfgang


en: hazard-mapping natural-hazard snow avalanche satellite

en: SPOT6 Avalanche outlines 24 January 2018

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset.

format: SHP

en:
Outlines of 18'737 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 24 January 2018. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

Abstract.
Accurate and timely information on avalanche occurrence are key for avalanche warning, crisis management and avalanche documentation. Today such information is mainly available at isolated locations provided by observers in the field. The achieved reliability considering accuracy, completeness and reliability of the reported avalanche events is limited. In this study we present the spatial continuous mapping of a large avalanche period in January 2018 covering the majority of the Swiss Alps (12’500 km2).

We tested different satellite sensors available for rapid mapping during a first avalanche period. Based on these experiences, we tasked SPOT6/7 data for data acquisition to cover the second, much larger avalanche period. We manually mapped the outlines of 18’737 individual avalanche events, applying image enhancement techniques to analyze regions in cast shadow as well as brightly illuminated ones. The resulting dataset of mapped avalanche outlines, having a unique completeness and reliability, is evaluated to produce maps of avalanche occurrence and avalanche size. We validated the mapping of the avalanche outlines using photographs acquired from helicopters just after the avalanche period.

This study demonstrates the applicability of optical, very high spatial resolution satellite data to map an exceptional avalanche period with very high completeness, accuracy and reliability over a large region. The generated avalanche data is of great value to validate avalanche bulletins, complete existing avalanche databases and for research applications by enabling meaningful statistics on important avalanche parameters.

Koordinate System: CH1903+ LV95 LN02

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow


en: topsoil-removal nematodes soil-chemistry plants soil-biodiversity restoration biodiversity grassland fungi soil-biology soil bacteria

en: Soil properties

en:
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)
N.pool	Soil nitrogen pool (June 2017); corrected for bulk density and 12 cm sampling depth [kg ha-1 12cm-1]
Corg.pool	Soil organic carbon pool (June 2017); corrected for bulk density and 12 cm sampling depth [kg ha-1 12cm-1]
pH	soil pH [CaCl2]
BD	Bulk density [g cm-3]
FC	Field capacity [%]
Veg.1	principle coordinate axis 1 (vegetation)
Veg.1	principle coordinate axis 2 (vegetation)
Nem.1	principle coordinate axis 1 (nematoda)
Nem.2	principle coordinate axis 2 (nematoda)
Fun.1	principle coordinate axis 1 (fungi)
Fun.2	principle coordinate axis 2 (fungi)
Prok.1	principle coordinate axis 1 (prokaryota)
Prok.2	principle coordinate axis 2 (prokaryota)
Veg.H	Shannon diversity (vegetation)
Nem.H	Shannon diversity (nematoda)
Fun.H	Shannon diversity (fungi)
Prok.H	Shannon diversity (prokaryota)

en: Nematode data

en:
Sample.data
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)

Taxonomy
ASV.ID	unit number.letter code per amplicon sequence variant (in total 904)
Taxonomic rank	Phylum, Class, Order, Family, Genus, Species

Abundance
columns	Plot.ID (see Sample.data)
rows	ASV.ID (see Taxonomy)

en: Networks

en:
Treatment	Treatment groups; Y.4-18 = restored grasslands; Initial = intensively managed grasslands; Target = species-rich semi-wet to semi-dry grasslands
Correlation	non-parametric Spearman rank correlations
Vertex.1+2	Comparison between network components; N.pool = total soil nitrogen pool [kg ha-1 12 cm-1]; Corg.pool = soil organic carbon pool [kg ha-1 12 cm-1], pH = soil pH [CaCl2]; BD = bulk density [g cm-3]; FC = field capacity [%]
	PCoA 1 + 2 biotic communities [Veg = vegetation; Nem = nematoda; Fun = fungi; Prok = prokaryota]
Type	Interactions type; A.A = abiotic.abiotic; A.B = abiotic.biotic; B.B = biotic.biotic

en: Ecosystem coupling_interactions

en:
Treatment	Treatment groups; Y.4-18 = restored grasslands; Initial = intensively managed grasslands; Target = species-rich semi-wet to semi-dry grasslands
Type	Interactions type; A.A = abiotic.abiotic; A.B = abiotic.biotic; B.B = biotic.biotic
Correlation	non-parametric Spearman rank correlations between biotic and abiotic parameters (ecological interactions)

en: Vegetation data

en:
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)
column I-LW	Plant abundance per species (in total 327 plant species) expressed as cover percentage estimation according to van der Maarel (vdM 1979; 7 classes: 1-7); nomenclature according to Lauber & Wagner (1996)

en: Fungi data

en:
Sample.data
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)

Taxonomy
OTU.ID	consecutive numbers for operational taxonomic units (OTUe 1-7794)
Taxonomic rank	Domain, Phylum, Class, Order, Family, Genus, Species

Abundance
columns	Plot.ID (see Sample.data)
rows	OTU.ID (see Taxonomy)

en: Distance to target results

en:
Community	biotic community (vegetation, nematoda, fungi, prokaryota)
Treatment	Treatment groups; Y.4-30= restored grasslands (time since restoration); Initial=intensively managed grasslands (I)
Comparison	within- or between-community Bray-Curtis dissimilarity distance comparison
Label	within-community distances of initial/restored grasslands: treatment abbreviation; between-communities distances of initial/restored-to-target grasslands: treatment abbreviation plus Target (T; species-rich grasslands)
mean	Mean distance to Target (6 plots per treatment group)
sd	Standard deviation of distances to Target (6 plots per treatment group)

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Resch, M.C., Schütz, M., Ochoa-Hueso, R., Buchmann, N., Frey, B., Graf, U., van der Putten, W.H., Zimmermann, S., Risch, A.C. (in review). Long-term recovery of above- and belowground interactions in restored grassland after topsoil removal and seed addition. Journal of Applied Ecology_

Please cite this paper together with the citation for the datafile.

Study area and experimental design
The study was conducted in and around two nature reserves, Eigental and Altläufe der Glatt, which were located approximately 5 km apart (47°27´ to 47°29´ N, 8°37´ to 8°32´ E, 417 to 572 m a.s.l., Canton of Zurich, Switzerland; Figure S1 and S2, Table S1). Mean annual temperature and precipitation are 9.8 ± 0.6 °C and 990 ± 168 mm (Kloten climate station 1988-2018; MeteoSchweiz, 2019). TFor this study, we used a space-for-time approach based on eight restoration sites that were between 3 and 32 years old. We measured recovery and restoration success by comparing the restored grasslands with intensively managed and semi-natural grasslands. Using a space-for-time approach requires high similarities in historical properties of the site, such as soil conditions and management regimes, to assure that temporal processes are appropriately represented by spatial patterns (Walker et al., 2010). This was the case in our study. The restored sites had similar soil conditions (i.e., soil type, structure, water availability) as the targeted semi-natural grasslands, while they shared the same agricultural legacy with intensively managed grasslands, i.e., biomass harvest and fertilization (manure and/or slurry) three to five times a year as well as tillage. We randomly established three 5 m x 5 m (25-m2) plots for plant identification and three 2 m x 2 m (4-m2) subplots for soil biotic and abiotic data collection at least 2 m away from the 25-m2 plots in each restoration site. Sites of similar age were grouped into four age classes: Y.4 (3 & 4 years after restoration), Y.18 (17 & 19 years), Y.24 (23 & 25 years), and Y.30 (27 & 32 years). Six intensively managed (Initial) and six semi-natural grassland (Target) sites complemented the experimental set-up, for a total of 36 plots. All plots were sampled under similar conditions, i.e., day of the year, air temperature, soil moisture, and time since last rain event, in June/July 2017 (intensively managed and semi-natural plots) and 2018 (restored plots).

Collection of plants and selected soil biota data
Plant species cover (in %) was visually estimated in each 25-m2 plot in mid-June (Braun-Blanquet, 1964; nomenclature: Lauber & Wagner, 1996). We calculated Shannon diversity and assessed plant community structure. We included soil microbial (fungi, procaryotes) and nematodes in our study as they represent the majority of soil biotic diversity and abundance (Bardgett & van der Putten, 2014), cover various trophic levels of the soil food web (Bongers & Ferris, 1999), and play key roles in soil functioning and ecosystem processes (Bardgett & van der Putten, 2014). In particular, soil nematodes were found to be well suited belowground indicators to evaluate recovery/development after restoration (e.g. Frouz, et al. 2008; Kardol et al., 2009; Resch et al., 2019). We randomly collected ten soil cores (2.2 cm diameter x 12 cm depths; sampler from Giddings Machine Company, Windsor, USA) in the 4-m2 subplots to assess soil nematode and microbial (fungal, prokaryotic) diversities and community structures. For soil nematodes, eight of the soil cores were combined and gently homogenized, placed in coolers and stored at 4 °C and transported to the laboratory (Netherlands Institute of Ecology, NIOO, Wageningen, Netherlands) within three days after collection. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriators (Oostenbrink, 1960). After extraction, each sample was divided into three subsamples, two for molecular identification and one to determine nematode abundance (see Resch et al., 2019). For the molecular work, two subsamples were stored in 70% ethanol (final volume 10 mL each) and transported to the laboratory at the Swiss Federal Research Institute WSL (Birmensdorf, Switzerland). Each subsample was reduced to roughly 200 μL by centrifugation and removal of the supernatant. The remaining ethanol was vaporized (65 °C for 3 h). Thereafter, 180 μL ATL buffer solution (Qiagen, Hilden, Germany) was immediately added and samples were stored at 4 °C until further processing. From these samples, nematode metagenomic DNA was extracted using the DNeasy Blood & Tissue Kit (Qiagen, Hilden, Germany) according to the manufacturer`s protocol, except for the incubation step which was run at 56 °C for 4 h. PCR amplification of the V6-V8 region of the eukaryotic small-subunit (18S) was performed with 7.5 μL of genomic DNA template (ca. 1 ng/μL) in 25 μL reactions containing 5 μL PCR reaction buffer, 2.5 mM MgCL2, 0.2 mM dNTPs, 0.8 μM of each primer (NemF: Sapkota & Nicolaisen, 2015; 18Sr2b: Porazinska et al., 2009), 0.5 μL BSA, and 0.25 μL GoTaq G2 Hot Start Polymerase (Promega Corporation, Madison, USA). Amplification was using an initial DNA denaturation step of 95 °C for 2 min, followed by 35 cycles at 94 °C for 40 sec, 58 °C for 40 sec, 72 °C for 1 min, and a final elongation step at 72 °C for 10 min. Filtering, dereplication, sample inference, chimera identification, and merging of paired-end reads was implemented using the DADA2 pipeline (v.1.12; Callahan et al., 2016) to finally assign amplicon sequence variants (ASVs) as taxonomic units.
We combined and homogenized the remaining two soil cores to assess soil microbes, placed them in coolers (4 °C) and transported them to the laboratory at WSL. Metagenomic DNA was extracted from 8 g sieved soil (2 mm) using the DNAeasy PowerMax Soil Kit (Qiagen, Hilden, Germany) according to the manufacturer´s protocol. PCR amplification of the V3-V4 region of the small-subunit (16S) of prokaryotes (i.e., bacteria and archaea) and the ribosomal internal transcribed spacer region (ITS2) of fungi was performed with 1 ng of template DNA using PCR primers and conditions as previously described (Frey et al., 2016). PCRs were run in triplicates, pooled and sent to the Genome Quebec Innovation Centre (Montreal, QC, Canada) for barcoding using the Fluidigm Access Array technology (Fluidigm) and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, USA). Quality filtering, clustering into operational taxonomic units (OTUs, 97% similarity cutoffs) and taxonomic assignment were performed as previously described (Resch et al., 2021).Taxonomic classification of nematode, prokaryotic and fungal sequences was conducted querying against the most recent versions of PR2 (v.4.11.1; Guillou et al., 2013), SILVA (v.132; Quast et al., 2013), and UNITE (v.8; Nilsson et al., 2019) reference sequence databases. Taxonomic assignment cutoffs were set to confidence rankings ≥ 0.8 (below ranked as unclassified). Prokaryotic OTUs assigned to mitochondria or chloroplasts as well as OTUs or ASVs assigned to other than Fungi or Nematoda were manually removed prior to data analysis. The three datasets were filtered to discard singletons and doubletons. Taxonomic abundance matrices were rarefied to the lowest number of sequences per community to achieve parity of the total number of reads between samples (Prokaryotes: 10,929 reads; Fungi: 18,337 reads; Nematodes: 6,662 reads). We calculated Shannon diversity and assessed community structures for soil nematodes, prokaryotes and fungi based on their relative abundances of ASV or OTU at the taxon level.

Collection of soil physical and chemical properties
We randomly collected one undisturbed soil core (5 cm diameter, 12 cm depth) per 4-m2 subplot using a steel cylinder that fit into the soil corer. The cylinders were capped to avoid disturbance during transport and used to measure field capacity, rock content and fine earth density as previously described (Resch et al., 2021). We randomly collected another three soil cores (5 cm diameter, 12 cm depths) in each 4-m2 subplot to determine soil chemical properties. The cores were pooled, dried at 60 °C for 48 h and passed through a 2 mm sieve. We measured soil pH (CaCl2) on dried samples, total nitrogen (N) and organic carbon (C) concentration on dried and fine-ground samples (≤ 0.5 mm; for details see Resch et al., 2021). We calculated total N and organic C pools after correcting its concentration for soil depth, rock content and fine earth density.

bacteria

display_name: bacteria

biodiversity

display_name: biodiversity

fungi

display_name: fungi

grassland

display_name: grassland

nematodes

display_name: nematodes

plants

display_name: plants

restoration

display_name: restoration

soil

display_name: soil

soil-biodiversity

display_name: soil-biodiversity

soil-biology

display_name: soil-biology

soil-chemistry

display_name: soil-chemistry

topsoil-removal

display_name: topsoil-removal

en: Long-term recovery of above-and belowground interactions in restored grasslands


en: strategic-projects land-use-transformations spatial-planning large-scale-urban-development-projects strategic-spatial-planning europe land-use-change urban-transformations

en: QCA R script large-scale urban development projects Europe

en:
For the set up of this R script, we used the “QCA” (Duşa, 2019) and “SetMethods” (Oana and Schneider, 2018) R packages.

The following further resources were also used:
Dusa, A. (2019). QCA with R: A comprehensive resource. Springer: Berlin.
Schneider, C. Q., & Wagemann, C. (2012). Set-theoretic methods for the social sciences. A guide to qualitative comparative analysis. Cambridge: Cambridge University Press.
Thomann, E., Oana, I.-E., & Wittwer, S. (2018). Performing fuzzy- and crisp set QCA with R. A user-oriented beginner's guide. Retrieved from http://www.evathomann.com/links/qca-r-manual

en: QCA data set large-scale urban development projects

en: Please refer to the sections: 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalization in the Metadata for further details on this resource.

en:
Table of Content: 1. General context of the data set "lsUDPs" ; 2. Background and aims of the study using the data set lsUDPs; 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalisation

1. General context of the data set "lsUDPs"
The data set "lsUDPs" has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2020. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, strategic spatial plans) into quantitative land-change modelling approaches at the urban regional level. The first stage (2016-2017) of the CONCUR project focussed on 21 urban regions in Western Europe. The urban regions were selected through a multi-stage strategy for empirical research (see Hersperger, A. M., Grădinaru, S., Oliveira, E., Pagliarin, S., & Palka, G. (2019). Understanding strategic spatial planning to effectively guide development of urban regions. Cities, 94, 96–105. https://doi.org/10.1016/j.cities.2019.05.032 ).

2. Background and aims of the study using the data set lsUDPs
As part of the CONCUR project, a specific task was to examine the relationship between strategic spatial plans and the formulation and implementation (i.e. urban land change) of large-scale urban development projects in Western Europe.
Strategic urban projects are typically large-scale, prominent urban transformations implemented locally with the aim to stimulate urban growth, for instance in the form of urban renewals of deprived neighborhoods, waterfront renewals and transport infrastructures. While strategic urban projects are referred to in the literature with multiple terms, in the CONCOR project we call them large-scale urban development projects (lsUDPs).
Previous studies acknowledged both local and supra-local (or structural) factors impacting the context-specific implementation of lsUDPs. Local governance factors, such as institutional capacity, coordination among public and private actors and political leadership, intertwine with supra-local conditions, such as state re-scaling processes and devolution of state competencies in spatial planning, de-industrialisation and increasing social inequality. Hence, in implementing lsUDPs, multi-scalar factors act in combination.
Because the formulation and implementation of lsUDPs require multi-scalar coordination among coalitions of public and private actors over an extended period of time, they are generally linked to strategic spatial plans (SSPs). Strategic spatial plans convey collective visions and horizons of action negotiated among public and private actors at the local and/or regional level to steer future urban development, and can contain legally binding dispositions, but also indicative guidelines.
The key question remains as to what extent large-scale urban development projects and strategic spatial plans can be regarded as aligned. By alignment, or “concordance”, we mean that strategic projects are formulated and implemented as part of the strategic planning process (“high concordance”), or that the strategic role of projects is reconfirmed in (subsequent) strategic plans (“moderate concordance”). Lack of concordance is found when lsUDPs have been limitedly (or not at all) acknowledged in strategic spatial plans.
We assume that certain local and supra-local factors, characterising the development of the projects, foster (but not strictly “cause”) the degree of alignment between lsUPDs and SSPs. In this study, we empirically examine how, and to what extent, the concordance between 38 European large-scale urban development projects and strategic plans (outcome: CONCOR) has been enabled by five multi-scalar factors (or conditions): (i) the role of the national state (STATE), (ii) the role of (inter)national private actors (PRIVATE), (iii) the occurrence of supra-regional external events (EVENTS), (iv) the degree of transport connectivity (TRANSP), and (v) local resistance from civil society (RESIST). We adopted a (multi-data) case-based qualitative strategy for empirical research and applied the formalised procedure of within- and cross-case comparison offered by fuzzy-set Qualitative Comparative Analysis appropriate for the goal of this study. Based on set theory, QCA formally integrates contextual sensitivity to case specificities (within-case knowledge) with systematic comparative analysis (across-case knowledge).
The research question the data set has been created to reply to is the following: which conditions, and combinations of conditions, enable the concordance between large-scale urban development projects and strategic spatial plans?
The conditions (“independent variables”) considered are. STATE: the set of large-scale urban projects characterized by a high degree of state intervention and support in their formulation and implementation, PRIVATE: the set of large-scale urban projects characterized by a high degree of involvement of (inter)national private actors in their formulation and implementation, EVENTS: the set of large-scale strategic projects whose formulation and implementation have been strongly affected by unforeseen international events and/or global trends, TRANSP: the set of large-scale strategic projects with a high degree of road and/or transit connectivity, and RESIST: set of large-scale strategic projects whose realization has been characterized by resistances that have substantially delayed or modified the project implementation.
The outcome (“dependent variable”) under analysis is CONCOR: the set of large-scale urban projects having a high degree of concordance/alignment/integration with strategic spatial plans

3. The data set lsUDPs

   3.1 Selection of cases and data collection
To generate the current data set on large-scale urban development projects in European urban regions (data set "lsUDPs"), we identified 35 large-scale urban development projects in a sample of the 21 Western urban regions considered in the CONCUR project (see supra, Hersperger et al. 2019): Amsterdam, Barcelona, Copenhagen, Hamburg, Lyon, Manchester, Milan, Stockholm, Stuttgart. The criteria we followed to identify the 35 large-scale urban development projects are: geographical location, size (large-scale), site (located either in the city core or in the larger urban region) and urban function (e.g. housing, transportation infrastructures, service and knowledge economic functions). Employing these criteria facilitated the selection of diverse large-scale urban development projects while still ensuring sufficient comparability.
In 2016, we performed 47 in-depth interviews with experts in urban and regional planning and large-scale strategic projects and infrastructure (i.e. academics and practitioners) about the formulation, implementation and development (1990s–2010s) of each project in each of the 9 selected urban regions. On average, each interviewee answered questions on 3.1 large-scale urban development projects. Three cases were subdivided into two cases because a clear differentiation between specific implementation stages was identified by the interviewees (expansion of the Barcelona airport, cases “bcn_airport80-90” and “bcn_airport00-16”; realisation of Lyon Part-Dieu, cases “lyo_partdieu70-90” and “lyo_partdieu00-16”; MediaCityUK, cases “man_salfordquays80-00” and “man_mediacityuk00-16”). Therefore, from the initial 35 cases, the final number of analysed cases in the lsUDPs dataset is 38.

    3.2 The data set lsUDPs: Data management and operationalisation
Interviews were fully transcribed and analysed through MAXQDA (version 12.3, VERBI GmbH, Berlin, Germany), and intercoder agreement was evaluated on a sample of nine interviews. We also compiled “synthetic case descriptions” (SCD) for each case (totalling more than 160 SCDs) to spot potential inconsistencies among interviewees’ accounts and to facilitate completion of the “calibration table” for each case (see below). An online expert survey distributed to the interviewees (response rate 78%) helped systematise the information collected during the interviews. We also consulted both academic and gray literature on the case studies to check for possible ambiguity and inconsistencies in the interview data, and to solve discrepancies between our assigned set membership scores and questionnaire values. Site visits were also carried out to retrieve additional information on the selected cases.
For each case (i.e. each of the 38 selected large-scale urban development projects), we operationalised each condition (i.e. STATE, PRIVATE, EVENTS, TRANSP, RESIST) and the outcome (CONCOR) in terms of sets, for subsequent application of Qualitative Comparative Analysis. This process is called “calibration”; we used a number of indicators for each condition to qualitatively assess each large-scale project across the conditions. The case-based qualitative assessment was then transformed into fuzzy-set membership values. Fuzzy-set membership values range from 0 to 1, and should be conceived as “fundamentally interpretative tools” that “operationalize theoretical concepts in a way that enhances the dialogue between ideas and evidence” (Ragin 2000:162, in “Fuzzy-set Social Science”. Chicago: University Press). We employed a four-value fuzzy-set scale (0, 0.33, 0.67, 1) to “quantify” into set membership scores the individual histories of cases retrieved from interview data. Only the condition TRANSP was calibrated as a crisp-set (0, 1).
The translation of qualitative case-based information into numerical fuzzy-set membership values was iteratively performed by populating a calibration table following standard practices recently emerged in QCA when dealing with qualitative (interview) data.

europe

display_name: europe

land-use-change

display_name: land-use-change

land-use-transformations

display_name: land-use-transformations

large-scale-urban-development-projects

display_name: large-scale-urban-development-projects

spatial-planning

display_name: spatial-planning

strategic-projects

display_name: strategic-projects

strategic-spatial-planning

display_name: strategic-spatial-planning

urban-transformations

display_name: urban-transformations

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: lsUDPS Large-scale urban development projects in European urban regions


maintainer: Chunhong Zhao

en: urban-morphology land-use austin land-dynamics landscape

en: Land use dynamics in Austin since 1992

en: The present dataset is part of the published scientific paper Zhao C, Weng Q, Hersperger A M. Characterizing the 3-D urban morphology transformation to understand urban-form dynamics: a case study of Austin, Texas, USA. Landscape and urban planning, 2020, 203:103881. The overall objective of this paper is to understand urban form dynamics in the Austin metropolitan area for the periods 2006–2011 and 2011–2016. The study also aims to understand to what extent the changes in the built environment (in terms of ‘efficient growth’ versus ‘inefficient growth’) from the 1990s to 2016 in the Austin metropolitan area corresponded with ‘compact and efficient growth’ planning policy documents. The UMT distribution can be found in the paper. The area of transitioning UMT was provided in Table 2 and Table 3 can be found in the Appendix of the paper. A protocol was developed to perform the content analysis of the strategic plans and gather the data. The detailed list of protocol items can be found in Appendix B of the paper. This study demonstrates the advantage of applying Lidar data to characterize 3-D urban morphology type (UMT) transition and understand its dynamics, which helps develop a comprehensive understanding of the urbanization process and provides a tool for planning intentions and policies evaluation on urban development over time. The UMT maps can be found in Appendix A of the paper. The Lidar point datasets and the 30 × 30 m National Land Cover Database (NLCD) are the two main data sources of UMT mapping. Lidar datasets were gathered from different projects that had been conducted and collected by state agencies and other organizations between 2007 and 2017. Table A1 in the appendix in the paper shows the accuracies and acquisition parameters of the Lidar projects from 2007 to 2017. Land use/cover dynamics in Austin metropolitan area dataset provides Land use/cover patterns in the years 1992, 2001, 2004, 2006, 2008, 2011, 2013, 2016 with a spatial resolution of 30 meters. Since NLCD 1992 used a different classification system for the urban land classes, we first reclassified the NLCD 1992 using a customized Arcpy package.

austin

display_name: austin

land-dynamics

display_name: land-dynamics

land-use

display_name: land-use

landscape

display_name: landscape

urban-morphology

display_name: urban-morphology

en: Land use/cover dynamics in Austin metropolitan area since 1992


biogas-aus-hofdunger-in-der-schweiz

title_for_slug: biogas-aus-hofdunger-in-der-schweiz

en: bioenergy biogas review manure switzerland

en: Biogas aus Hofdünger in der Schweiz

en: Ziel dieses Whitepapers ist es, Entscheidungsträgern, Verwaltungen und Stakeholdern die aktuellsten Forschungsergebnisse zur Verfügung zu stellen, um die optimale Nutzung von Bioenergie aus Hofdünger in der Schweizer Energiewende zu fördern. Zu diesem Zweck werden die Ergebnisse des Schweizer Kompetenzzentrums für Bioenergieforschung - SCCER BIOSWEET - zusammengefasst und in einem breiteren Kontext dargestellt. Wenn nichts anderes erwähnt wird, beziehen sich die Ergebnisse auf die Schweiz und im Falle der Ressourcen auf die heimischen Biomassepotenziale.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland


en: weisfluhjoch radiation shortwave-radiation davos longwave-radiation

en: Processing doc

en: Description of processing code that was ported to R by P. Frei (2016).

en: Parameter file

en: Description of ASRB parameters.

en: DATA ACCESS

en: ASRB radiation station at the Weissfluhjoch versuchsfeld.

en: Metadata

en:
Incoming and outgoing shortwave and longwave 2 min radiation measurements at the Weissfluhjoch research site, Davos, CH. The experimental site at the Weissfluhjoch (WFJ, 46.83 N, 9.81 E) is located at an altitude of 2540 m in the Swiss Alps near Davos. During the winter months, almost all precipitation falls as snow at this altitude. As a consequence, a continuous seasonal snow cover builds up every winter, with a maximum snow height ranging from 153–366 cm over the period 1934–2012. The measurement site is located in an almost flat part of a southeast oriented slope.

 References
1. Marty, C., Philipona, R., Frohlich, C., Ohmura, A.. Altitude dependence of surface radiation fluxes and cloud forcing in the alps: results from the alpine surface radiation budget network. 2002. Theoretical and Applied Climatology. Volume 72. Issue 3-4. 137-155. http://dx.doi.org/10.1007/s007040200019. 10.1007/s007040200019.
2. Christoph Marty. Surface Radiation, Cloud Forcing and Greenhouse Effect in the Alps. 2000. Institute fuer Klimaforschung ETH. Zuercher Klima-Schriften. Volume 79. http://e-collection.library.ethz.ch/eserv/eth:23491/eth-23491-01.pdf.

davos

display_name: davos

longwave-radiation

display_name: longwave-radiation

radiation

display_name: radiation

shortwave-radiation

display_name: shortwave-radiation

weisfluhjoch

display_name: weisfluhjoch

en: ASRB_WFJVF: Shortwave and longwave radiation measurements (2 min) at the Weissfluhjoch research site, Davos


maintainer: Esther Frei

en: mountain-forest treeline afforestation long-term-experiment stillberg

en:
 Background information

The Stillberg ecological treeline research site in the Swiss Alps was established in 1975, with the aim to develop ecologically, technically, and economically sustainable reforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Long-term monitoring of the large-scale high-elevation afforestation has generated data about tree growth, survival, and vitality. In addition, detailed characteristics of the microsite conditions of the research were conducted. Besides providing a scientific basis and practical guidelines for high-elevation afforestation, this research has contributed to a comprehensive understanding of ecological processes in the treeline ecotone.

 Experiment description

The Stillberg afforestation experiment was established in 1975 by planting 92,000 seedlings of *Larix decidua*, *Pinus cembra* and *Pinus mugo* ssp. *uncinata* in the alpine treeline ecotone. The afforestation site is located on a northeast-facing slope with steep, topographically highly structured terrain and covers elevations from 2075 to 2230 m a.s.l. The afforestation site was divided into 4052 square plots of 3.5 × 3.5 m, arranged in a regular species-alternating pattern over the whole area. Each plot contained 25 trees of one species (1350 plots per species), and the seedlings were systematically planted 70 cm apart. The trees have been monitored since 1975. Specifically, tree mortality was assessed annually from 1975 until 1995 and has been documented every ten years since then, with surveys in 2005 and 2015 (the next survey is due in 2025). Height of the surviving trees was measured in 1975, 1979, 1982, 1985, 1990, 1995, 2005, and 2015. In 1995, 2005, and 2015, drivers of tree vitality were assessed for a subset of trees per plot. Additionally, an extensive set of environmental parameters characterizing microsite conditions of the afforestation area were recorded before and after the planting of the trees.

 Data description

The five datasets from the afforestation experiment comprise ecological and environmental data from the main afforestation experiment in five datasets with accompanying metadata (Stillberg_afforestation_all_metadata.xlsx). All data and metadata files are bundled in a ZIP-file (Stillberg_afforestation_v1.zip). In particular, a first dataset contains environmental data characterising microsite conditions of the 4000 plots with regard to soil, topography, vegetation and microclimatic conditions (Stillberg_afforestation_plot_data_v1.csv; Stillberg_afforestation_plot_metadata_v1.csv. In each plot, the natural tree regeneration was assessed by counting seedings of several tree species in 2005 and 2015 (Stillberg_afforestation_regeneration_data_v1.csv; Stillberg_afforestation_regeneration_metadata_v1.csv). Furthermore, specific information about each of the 92’000 planted trees of the tree species is available (Stillberg_afforestation_tree_parameter_data_v1.csv; Stillberg_afforestation_tree_parameter_metadata_v1.csv). Survival data for each of the 92’000 individual trees can be found in a separate dataset (Stillberg_afforestation_tree_survival_data_v1.csv; Stillberg_afforestation_tree_survival_metadata_v1.csv). Tree growth and vitality parameters are available for all trees from 1995, and for subsets of trees for 2005 and 2015 (Stillberg_afforestation_tree_measurements_data_v1.csv; Stillberg_afforestation_tree_measurements_metadata_v1.csv).

afforestation

display_name: afforestation

long-term-experiment

display_name: long-term-experiment

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline

display_name: treeline

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Long-term afforestation experiment at the Alpine treeline site Stillberg, Switzerland


en: laboratory-study ice chemistry snow-atmosphere-interactions atmosphere

en: Processed data as shown in Figure 4 of publication. X-ray energy in eV in column one, electron count intensity in arb. units in column 2.

en: Near Ambient Pressure partial Auger-Meitner electron yield X-ray absorption spectra and photon flux data. X-ray energy in eV in column 1, analyzer electron count intensity in arb. units in column 2.

en:
The table lists all NEXAFS raw data with the following columns:

* name:						raw file name
* xRayEkinRange_eV: 		Smallest and largest X-ray photon energy in eV
* scientaPassEnergy_eV: 	Pass energy of electron analyzer in eV
* scientaDwellTime_ms: 		Dwell time of electron analyzer in ms
* regionName:				O K-edge for all data
* scientaAcquisitionMode: 	Fixed energy (snapshot) mode
* scientaEkinRange_eV: 		Smallest and largest energy of the kinetic energy window used for detection in this work
* scientaEkinStep_eV		Not defined in fixed energy mode
* scientaLensMode:			Tune table
* scientaRegionIterations: 	Iterations (sweeps)
* scientaSequenceIterations: Iterations (sweeps)
* sampleTemp_dC: 			Temperature as monitored at the sample holder in °C
* cellPressure_mbar: 		Total pressure in measurement cell in mbar
* iceTemp_dC: 				Temperature of ice sample calculated based on vapour pressure (assuming total pressure equals partial pressure of water) in °C
* smplX_mm: 				positon of measurement spot, x dimension in mm
* smplY_mm: 				positon of measurement spot, y dimension in mm
* smplZ_mm: 				positon of measurement spot, z dimension in mm
* sealingTemp:				temperature at base of sample manipulator
* lastModifiedDatestr: 		time and date when data aquisition was finished
* sample: 					sample description

en: Data are compiled that have been used to demonstrate the impact of high water partial pressure on X-ray absorption spectra of ice.

atmosphere

display_name: atmosphere

chemistry

display_name: chemistry

ice

display_name: ice

laboratory-study

display_name: laboratory-study

snow-atmosphere-interactions

display_name: snow-atmosphere-interactions

en: An ice oxygen K-edge NEXAFS spectroscopy data set on gas-phase processing


en: forest-inventory unmanned-aerial-vehicle-laser-scanning terrestrial-photogrammetry lidar structure-from-motion mobile-laser-scanning 3d-point-cloud terrestrial-laser-scanning

en:
Close Range Remote Sensing Benchmark for different LiDAR and photogrammetric Sensors in a mixed temperate forest.
Benchmarks are needed to evaluate the performance of different close-range remote sensing devices and approaches, both in terms of efficiency as well as accuracy. In this study we evaluate the performance of two terrestrial (TLS), one handheld mobile (PLS) and two drone based (UAVLS) laser scanning systems to detect trees and extract the diameter at breast height (DBH) in three plots with a steep gradient in tree and understorey vegetation density. As a novelty, we also tested the acquisition of 3D point-clouds using a low-cost action camera (GoPro) in conjunction with the Structure from Motion (SfM) technique and compared its performance with those of the more costly LiDAR devices.

forest-inventory

display_name: forest-inventory

lidar

display_name: lidar

mobile-laser-scanning

display_name: mobile-laser-scanning

structure-from-motion

display_name: structure-from-motion

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

terrestrial-photogrammetry

display_name: terrestrial-photogrammetry

unmanned-aerial-vehicle-laser-scanning

display_name: unmanned-aerial-vehicle-laser-scanning

en: Ramerenwald Close Range Remote Sensing Benchmark


disdrometer-data-davos-wolfgang

title_for_slug: disdrometer-data-davos-wolfgang

en: fall-velocity raclets precipitation davos disdrometer

en: Disdrometer Data Davos Wolfgang

en:
The zip folder contains one netCDF file per day for Davos Wolfgang from February 8 to March 19 2019 with a temporal resolution of 30 seconds (time in UTC) and includes:

- characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...)
- precipitation rate
- radar reflectivity
- visibility range
- weather codes
- instrument performance

en: The dataset contains information on precipitation amount and type for Davos Wolfgang (LON: 9.853594, LAT: 46.835577) from February 8 to March 19 2019. It includes: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

davos

display_name: davos

disdrometer

display_name: disdrometer

fall-velocity

display_name: fall-velocity

precipitation

display_name: precipitation

raclets

display_name: raclets


en: snowmicropen meteorological-data antarctica terrestrial-laser-scanning drifting-snow mass-flux

en: Dataset

en: Links to the dataset

en: README

en: Describes the dataset in detail

en:
This dataset contains the data acquired during the expedition to Princess Elisabeth Antarctica Station in December 2016 and January 2017. The dataset consits of meterorological data, drifting snow mass flux data, SnowMicroPen data and Terrestrial Laser Scanning data.

Please refer to the README for more information about the data.

This dataset is the basis of the following publication:

Sommer, C. G., Wever, N., Fierz, C., and Lehning, M.: Wind-packing of snow in Antarctica, The Cryosphere Discuss., https://doi.org/10.5194/tc-2018-36, in review, 2018.

antarctica

display_name: antarctica

drifting-snow

display_name: drifting-snow

mass-flux

display_name: mass-flux

meteorological-data

display_name: meteorological-data

snowmicropen

display_name: snowmicropen

educ

en: Education, culture and sport

en: Expedition to Princess Elisabeth Antarctica Station, 2016/2017


maintainer: Markus Schlegel

en: monitoring metabarcoding air-sampling edna spore-dispersal

en: Data files and analysis scripts (Version 1)

en: This ZIP archive contains the data and source code necessary to reproduce the analyses for the manuscript "A case study on the application of spore sampling for the monitoring of fungi". Please refer to README.pdf inside the archive for more information.

en:
Resources associated with the manuscript *A case study on the application of spore sampling for the monitoring of fungi* (Schlegel et al. 2023, submitted).
Airborne environmental DNA (eDNA) monitoring of fungi was evaluated on a species-rich grassland site. Extensive fruiting body surveys yielded 29 waxcap and clavarioid species, 19 of which were also detectable in air eDNA. The analysis indicates that spores of locally occurring fruiting bodies were detected, in addition to a large diversity of common fungal species, while rare and threatened species were underrepresented in the air.
The contents of the dataset (ZIP archive):
* All analysis scripts in [R-Markdown](https://rmarkdown.rstudio.com) format, including the rendered PDF output with figures and tables (*analysis* directory)
* eDNA sample metadata (*amplicon_meta*) and results of the amplicon clustering (*amplicon_data*) and the source code of the pipeline (*amplicon_pipeline*)
* positions of all fruiting body groups found in the surveys (3838 GPS points) (*surveys*)
* positions of the spore traps, taxonomy of studied grassland fungi and red-list species, and many more resources
Please refer to `README.pdf` inside the archive for a complete description of the file structure and information on how to reproduce the analyses.

air-sampling

display_name: air-sampling

edna

display_name: edna

metabarcoding

display_name: metabarcoding

monitoring

display_name: monitoring

spore-dispersal

display_name: spore-dispersal

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Supporting information for case study on the application of spore sampling for the monitoring of fungi


en: endemism madagascar landscape-evolution geology flora

en: Data v1.o

en: used for paper submission only

en: Escarpment evolution drives the diversification of the Madagascar flora

en: This upload contains the data (species checklist, species range maps, time-calibrated phylogenies, topographic change, etc.) generated, analyzed, and presented in the paper .

en: Although much of the endemic biodiversity of Madagascar can be attributed to its isolation as an island in the Indian Ocean, the high rates of speciation throughout its geologic history suggest an influence of local-scale landscape dynamics. The topographic evolution of Madagascar is dominated by the formation of high-relief continental rift escarpment and we argue that the erosion and landward retreat of this topography creates habitat heterogeneity that has served as a speciation pump for the island. The highest plant richness is found along the escarpment and is characterized by steady diversification rates over the last 45 Ma. Modeled landscape evolution by escarpment retreat demonstrates opportunities for allopatric speciation by transient habitat fragmentation through multiple mechanisms, including catchment expansion, isolation of highland remnants and formation of topographic and river barriers The segregation of floral phylogenetic turnover parallel to the escarpment is consistent with these mechanisms and indicates the importance of erosion-driven landscape dynamics on speciation.

endemism

display_name: endemism

flora

display_name: flora

geology

display_name: geology

landscape-evolution

display_name: landscape-evolution

madagascar

display_name: madagascar


lwf-tea-bag-sites

maintainer: Marcus Schaub

title_for_slug: lwf-tea-bag-sites

en: green-tea decomposition verification tea-bag carbon litter forest roiboos modeling

en: Site Information

en: Descriptive information on sites

en:
Decomposition of plant litter is a key process for the transfer of carbon and nutrients in ecosystems. Carbon contained in the decaying biomass is released to the atmosphere as respired CO2, and may contribute to global warming. Litterbag studies have been used to improve our knowledge of the drivers of litter decomposition, but they lack comparability because litter quality is plant species-specific. The use of commercial tea bags as a standard substrate was suggested in order to harmonize studies, where green tea and rooibos represent more labile and more recalcitrant C compounds as surrogates of local litter.
The tea bag approach was implemented on eight sites of the Swiss long-term Forest Ecosystem Research (LWF) network (https://www.wsl.ch/LWF). This allowed us to take advantage from the existing infrastructure and data from a previous litterbag study with local litter. In Beatenberg and Schaenis, additional elevation transects were established (1200-1800 m and 540-1150 m, respectively) to examine particularly the effect of temperature on decomposition. In Pfynwald (https://www.wsl.ch/de/ueber-die-wsl/versuchsanlagen-und-labors/flaechen-im-wald/pfynwald.html) and Salgesch, infrastructure of running projects was used to examine the effect of drought and understory removal, respectively. In Novaggio, tea bags were incubated in summer and winter to study the effect of seasonality particularly precipitation. Tea bags are collected after 3, 12, 24, and 36 months; for the two time-shifted experiments additionally after 6 and 9 months.
The study has two primary objectives. Firstly, it contributes to TeaComposition initiative (http://teacomposition.org/) which aims at investigating long-term litter decomposition and its key drivers at present as well as under different future climate scenarios using a common protocol and standard litter (tea) across nine terrestrial biomes. Secondly, the data are used to further develop decomposition models such as Yasso (http://en.ilmatieteenlaitos.fi/yasso) which is used by several countries, including Switzerland to estimate the annual carbon fluxes in dead wood, litter, and soil for reporting in National Greenhouse Gas Inventories under the United Nations Framework Convention on Climate Change and the Kyoto Protocol.

carbon

display_name: carbon

decomposition

display_name: decomposition

forest

display_name: forest

green-tea

display_name: green-tea

litter

display_name: litter

modeling

display_name: modeling

roiboos

display_name: roiboos

tea-bag

display_name: tea-bag

verification

display_name: verification

en: LWF-Tea bag sites


en: perception-of-ecosystem-services visual-attractiveness online-questionnaire-survey adults-and-teenagers nfi-photos

en: Codebook to SPSS-file

en: SPSS-Dataset

en: Questionnaire Italian

en: Questionnaire French

en: Dataset in csv-format

en: Questionnaire German

en: This questionnaire survey was conducted as an online survey and aimed at investigating the relationship between physical forest characteristics, visual attractiveness of forest and the perception of ecological and cultural ecosystem services in urban forests. Each participant was shown 6 photos out of a pool of 50 photos taken from the Swiss National Forest Inventory (NFI) database. Physical forest characteristics were derived from the photos. The study was conducted as part of the "WaMos meets LFI" (WML) project.

adults-and-teenagers

display_name: adults-and-teenagers

nfi-photos

display_name: nfi-photos

online-questionnaire-survey

display_name: online-questionnaire-survey

perception-of-ecosystem-services

display_name: perception-of-ecosystem-services

visual-attractiveness

display_name: visual-attractiveness

educ

en: Education, culture and sport

en: Relationship between physical forest characteristics, visual attractiveness and perception of ecosystem services in urban forests


maintainer: Leo Gallus Bont

en: qgis openstreetmap accessible-forest geoprocessing seilaplan forest

en: Juypter Notebook for Data Preparation (online)

en: Railways vector data (close to the sample forest range)

en: Preview

media_type: image/png

format: PNG

mimetype: image/png

en: Juypter Notebook for Data Preparation

en: Power lines vector data (close to the area of the sample forest range)

en: Forest vector data (for sample forest range)

en: Digitised sample perimeter

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019