restoring-grassland-multifunctionality

title_for_slug: restoring-grassland-multifunctionality

en: mineralization grassland restoration ecosystem-multifunctionality plants nematodes fungi biodiversity soil-biodiversity bacteria

en: Please note that EMF, MF.below, MF.abio and Soil.hetero have been corrected.

en: Please note that C.sto and Corg have been corrected.

en: Functional diversity above_belowground fauna

en:
Please cite this paper together with the citation for the datafile.

Resch, M. C., Schütz, M., Buchmann, N., Frey, B., Graf, U., van der Putten, W. H., Zimmermann, S., Risch, A. C. 2021. Evaluating long-term success in grassland restoration – an ecosystem multifunctionality approach. Ecological Applications 31, e02271.

 Study area

The study was conducted in the Canton of Zurich, Switzerland, in and around two nature reserves Eigental and Altläufe der Glatt (47°27’ to 47°29’ N, 8°37’ to 8°32’ E, 417 to 572 m a.s.l.). All studied grasslands were located with a radius of approximately 4 km. Average monthly temperatures range from 0.7 ± 2.0 °C (January) to 19.0 ± 1.5 °C (July), and monthly precipitation range from 60 ± 42 mm (January) to 118 ± 46 mm (July [maxima]; 1989-2017; MeteoSchweiz 2018). In our study, we focused on semi-dry and semi-wet oligo- to mesotrophic grasslands characterized by high plant species richness and groundwater fluctuations throughout the year (Delarze et al. 2015, see also Resch et al. 2019).

 Experimental design and sampling

A large-scale restoration experiment to expand and reconnect isolated remnants of species-rich grasslands was initiated in the nature reserve Eigental in 1990. Twenty hectares of adjacent intensive grasslands were chosen for restoration. In 1995, three restoration methods of increasing intervention intensities were implemented. The goal of all three methods was to lower the availability of soil nutrients and hence, facilitate ecosystem development towards the targeted nutrient-poor grasslands. These methods were: Harvest only (hay harvest twice a year), Topsoil (removal of the nutrient-rich topsoil), and Topsoil+Propagules (topsoil removal combined with the application of hay from target vegetation). Plant biomass harvest (once a year in late summer/early autumn) commenced in Topsoil and Topsoil+Propagules five years after the soils were removed and is still ongoing today. We measured restoration success by comparing the three restoration methods with intensively managed (Initial) and semi-natural grasslands (Target) 22 years after restoration. Initial grassland sites share the same agricultural history as the restored sites: mowing and subsequent fertilizing (manure) up to five times a year, as well as different tillage regimes (Resch et al. 2019). Target sites were the sites from which hay for seeding the Topsoil+Propagules sites was collected. Soil conditions (i.e., soil types, soil texture) were comparable to those found in the restored grasslands (Resch et al. 2019). Additionally, Target sites were selected to represent a variety of semi-natural grasslands, including semi-dry to semi-wet conditions. In Target grasslands, biomass is harvested once a year in late summer or early autumn. Eleven 5 m x 5 m (25 m2) plots were randomly established in each of the five treatments (in total 55 plots; for a detailed map see Neff et al. 2020). An additional 2 m x 2 m (4 m2) subplot was randomly established at least 2 m away from each 25 m2 plot for destructive sampling. Data sampling took place between June and September 2017.

Vegetation properties

All plant species were identified within the 25 m2 plots (nomenclature: Lauber and Wagner 1996) in mid-June 2017 (in total 250 species). Vegetation structure and plant biomass were assessed diagonally on a transect of 2 m x 10 cm within the 25 m2 plot in early July 2017. We measured the maximum and mean height of the vegetation at the start, middle and end of the transect and calculated the standard deviation of these measures to describe vegetation structural heterogeneity (Schuldt et al. 2019). Thereafter, biomass was clipped on the entire transect to 1 cm height, sorted into five functional groups (graminoids, forbs, legumes, litter, and woody species), dried at 60 °C for 48 h, and weighed (Meyer et al. 2015).

 Aboveground arthropods

Aboveground arthropods were sampled at two locations in each 25 m2 plot in early July 2017 (see also Neff et al. 2020). Briefly, two cylindrical baskets (50 cm diameter, 67 cm height; woven fabric) were thrown simultaneously from outside the plot into two opposite corners. A closable mosquito mesh sleeve was mounted to the top of the baskets and an integrated metal ring at the bottom was fixed to the ground with metal stakes to assure that insects could not escape. A suction sampler (Vortis, Burkhard Manufacturing Co. Ltd., Hertfordshire, England) was then inserted into one of the baskets through the opening of the sleeve and the plot was “vacuumed" twice for 105 seconds with a 30 seconds break. The collected animals were immediately transferred into 70% ethanol. Arthropods were sorted and assigned to 23 taxonomic groups. Holometabolic larvae were lumped into one category while hemimetabolic larvae were grouped separately from adults in the respective taxonomic rank. We used mean values of individuals per plot for total abundance. Aboveground arthropod richness was defined by the number of different taxa to lowest taxonomic level (in total 23 taxa). All taxa were assigned to one of five trophic levels: 1) primary producers, 2) primary consumers, 3) secondary consumers, 4) tertiary consumers, and 5) quaternary consumers.

 Belowground fauna

Sampling of all belowground fauna took place in mid-July 2017. Earthworms were sampled in two 30 cm x 30 cm x 20 cm soil monoliths at two opposite corners of the 25 m2 plot (opposite to aboveground arthropod sampling). The excavated soil monolith was broken by hand, all earthworms collected and immediately transferred in a 4% formaldehyde solution. Thereafter, earthworm individuals were identified to species level (in total 10 taxa; Christian and Zicsi 1999) and species assigned to three functional groups (Bouché 1977).
To assess soil arthropod communities, we randomly collected one undisturbed soil core (5 cm diameter, 12 cm depth) in each 4 m2 subplot with a slide hammer corer lined with a plastic sleeve (AMS Samplers, American Falls, Idaho, USA). Soil arthropods were extracted using Berlese-Tullgren funnels (3 mm mesh), starting the day of sampling and lasting 14 days. Individuals were stored in 70% ethanol. Soil arthropods were assigned to 41 taxonomic groups and 4 feeding types. Holometabolic and hemimetabolic larvae were treated as previously described for aboveground arthropods. Belowground arthropod richness refers to the 41 taxonomic groups.

For soil nematode sampling, we randomly collected eight soil cores of 2.2 cm diameter (Giddings Machine Company, Windsor, CO, USA) within each 4 m2 subplot to a depth of 12 cm. The eight cores were combined, gently homogenized, placed in coolers, kept at 4 °C and transported to the laboratory at NIOO in Wageningen (NL) within one week after collection. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriator (Oostenbrink 1960) and prepared for morphological identification and quantification as described by Resch et al. (2019). Nematodes were identified to family level (39 taxa) according to Bongers (1988), assigned to 17 functional groups, 5 feeding types and 5 colonizer-persister (C-P) classes (Yeates et al. 1993, Bongers 1990, Resch et al. 2019).

We randomly collected two more soil cores (2.2 cm diameter x 12 cm depth) within each 4 m2 subplot to determine soil microbial communities. Again, the soil cores were combined, homogenized, placed in coolers and transported to the laboratory at WSL in Birmensdorf (Switzerland) where the metagenomic DNA was extracted from 8 g sieved soil (2 mm) using the DNeasy PowerMax Soil Kit (Quiagen, Hilden, NRW, GER) according to the manufacturer`s instructions. PCR amplification of the V3-V4 region of the prokaryotic small-subunit (16S) and the ribosomal internal transcribed spacer region (ITS2) of eukaryotes was performed with 1 ng of template DNA utilizing PCR primers and conditions as previously described (Frey et al., 2016). PCRs were run in triplicates and pooled. The pooled amplicons were sent to the Genome Quebec Innovation Centre (Montreal, QC, Canada) for barcoding using the Fluidigm Access Array technology (Fluidigm) and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, CA, USA). Quality filtering, clustering into operational taxonomic units (OTUs) and taxonomic assignment were performed as described by Frey et al. (2016) and Adamczyk et al. (2019). We used a customised pipeline largely based on UPARSE (Edgar 2013) implemented in USEARCH v. 9.2 (Edgar 2010). After discarding singletons of dereplicated sequences, clustering into OTUs with 97% sequence similarity was performed (Edgar 2013). Quality-filtered reads were mapped on the filtered set of centroid sequences. Taxonomic classification of prokaryotic and fungal sequences was conducted querying against most recent versions of SILVA (v.132, Quast et al. 2013) and UNITE (v.8, Nilsson et al. 2018). Only taxonomic assignments with confidence rankings equal or higher than 0.8 were accepted (assignments below 0.8 set to unclassified). Prokaryotic OTUs assigned to mitochondria or chloroplasts as well as eukaryotic OTUs assigned other than fungi were removed prior to data analysis. In addition, prokaryotic and fungal datasets were filtered to discard singletons and doubletons. Thereafter, OTU abundance matrices were rarefied to the lowest number of sequences per community, to normalize the total number of reads and achieve parity between samples (Prokaryota: 29,843 reads; Fungi: 26,690 reads). Finally, prokaryotic and fungal observed richness (number of OTUs) were estimated (Prokaryota: 14,010 OTUs; Fungi: 5,813 OTUs). For prokaryotes, we distinguished five and for fungi six functional types based on lowest taxonomic resolution (Nguyen et al. 2016, Tedersoo et al. 2014). Belowground taxon richness was defined by the total number of earthworm, arthropod, nematode, fungi, and prokaryote taxa assigned to lowest taxonomic level. Finally, all belowground taxa were assigned to the same five trophic levels as the aboveground arthropods.

 Soil chemical and physical properties, soil nitrogen mineralization

We randomly collected three 5 cm diameter x 12 cm depth soil samples in each 4 m2 subplot with a slide hammer corer (AMS Samplers, American Falls, Idaho, USA), pooled them and then made two subsamples. One was field-fresh and stored at 3 °C until analysis, the other was dried for 48 h at 60 °C and passed through a 4 mm mesh. From the dried sample, we measured soil pH potentiometrically in 0.01 M CaCl2 (soil:solution ratio=1:2; 30 minutes equilibration time). Total and organic carbon content were measured on fine-ground samples (≤ 0.5 mm) by dry combustion using a CN analyzer NC 2500 (CE Instruments, Wigan, United Kingdom). Inorganic carbon of samples with a pH > 6.5 was removed with acid vapor prior to analysis of organic carbon (Walthert et al. 2010). We calculated total soil carbon (C) storage after correcting its content for soil depth, stone content and density of fine earth (see below). Exchangeable cations were determined on another 5 g dry soil sample with 50 mL unbuffered 1 M NH4Cl solution (soil:solution ratio=1:10, end-over-end shaker for 1.5 hours) and measured by an ICP-OES (Optima 7300 DV, Perkin-Elmer, Waltham, Massachusetts, USA). Thereafter, cation exchange capacity (CEC) was calculated as the sum of exchangeable cations and protons (and expressed as mmolc per 1 kg soil) and used to describe nutrient retention capacity in our plots. Concentrations of exchangeable protons were calculated as the difference between total and Al-induced exchangeable acidity as determined by the KCl-method (Thomas 1982).

Ammonium (NH4+) and nitrate (NO3−) were extracted from a 20 g fresh subsample with 80 mL 1M KCl for 1.5 hours on an end-over-end shaker and filtered through ashless folded filter paper (DF 5895 150, ALBET LabScience, Hahnemühle FineArt GmbH, Dassel, Germany). NH4+ concentrations were determined colorimetrically by automated flow injection analysis (FIAS 300, Perkin-Elmer, Waltham, Massachusetts, USA). NO3− concentrations were measured colorimetrically according to Norman and Stucki (1981). Potential soil net nitrogen (N) mineralization was assessed during an 8-week incubation period under controlled moisture (60% of field capacity), temperature (20 °C) and light conditions (dark) in the laboratory. We weighed duplicate samples of fresh soil equivalent to 8 g dry soil (24 h at 104 °C) into 50 mL Falcon tubes. Soil samples were extracted for NH4+ and NO3− at the beginning and after eight weeks as described above. Soil net N mineralization was calculated as the difference between the inorganic nitrogen (NH4+ and NO3−) before and after the incubation (Hart et al. 1994), corrected for the total incubation time and represented per day values expressed as mg N kg-1 soil d-1.

To assess soil physical properties, we randomly collected one undisturbed soil core per 4 m2 subplot (5 cm diameter, 12 cm depth) in a steel cylinder that fit into the slide hammer (AMS Samplers, American Falls, Idaho, USA). The cylinder was capped in the field to avoid disturbance. We then measured field capacity in the laboratory. For this purpose, the cylinder and soil therein were saturated in a water bath and drained on a sand/silt-bed with a suction corresponding to 60 cm hydrostatic head. The moist soil was dried at 105 °C to constant weight. Field capacity was calculated by dividing the mass of water by the total mass of wet soil contained at 60 cm hydrostatic head and used to describe water holding capacity. Thereafter, samples were passed through a 4 mm mesh. Fine-earth and skeleton fractions were weighed separately to assess bulk soil density (fine-earth plus skeleton), density of fine earth, and proportion of skeleton. Particle density was determined with the pycnometer method (Blake and Hartge 1986), and total porosity and proportion of fine pores were calculated (Danielson and Sutherland 1986). Clay, silt, and sand contents were quantified with the sediment method (Gee and Bauder 1986).

Surface and soil temperature (12 cm depth, water-resistant digital pocket thermometer; IP65, H-B Instrument, Trappe, Pennsylvania, USA) as well as volumetric soil moisture content (12 cm depth, time domain reflectometry; Field-Scout TDR 300, Spectrum Technologies, Aurora, Illinois, USA) were measured at five random locations within the 4 m2 subplots every month from June to September. We calculated the standard deviation of each temperature and moisture measure over four months to describe seasonal variations. Slope inclination was determined at plot-level via GPS measurements (GPS 1200, Leica Geosystem, Heerbrugg, Switzerland) and categorized into slope gradient classes according to FAO standards (1990). Thickness of the topsoil horizon (equivalent to Ah or Aa horizon) was determined at one soil monolith (30 x 30 x 30 cm3) per 4 m2 subplot in cm and rounded to next integer.

 References

Adamczyk, M., F. Hagedorn, S. Wipf, J. Donhauser, P. Vittoz, C. Rixen, A. Frossard, J. Theurillat, and B. Frey. 2019. The soil microbiome of GLORIA mountain summits in the Swiss Alps. Frontiers in Microbiology 10:1080-1101.

Blake, G.R., and K. H. Hartge. 1986. Particle Density. Pages 377-382 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Bongers, T. 1988. De nematoden van Nederland. Stichting Uitgeverij van de Koniklijke Nederlandse Natuurhistorische Verenigung (KNNV), Utrecht.

Bongers, T. 1990. The maturity index: an ecological measure of environmental disturbance based on nematode species composition. Oecologia 83:14-19.

Bouché, M. B. 1977. Strategies lombriciennes. Ecological Bulletins 25:122-132.

Christian, E., and A. Zicsi. 1999. Ein synoptischer Bestimmungsschlüssel der Regenwürmer Österreichs (Oligochaeta: Lumbricidae). Die Bodenkultur 50:121-131.

Danielson, R. E., and P. L. Sutherland. 1986. Porosity. Pages 443-461 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Delarze, R., Y. Gonseth, S. Eggenberg, and M. Vust. 2015. Lebensräume der Schweiz: Ökologie ‐ Gefährdung ‐ Kennarten, Ott Verlag, Bern.

Edgar, R. C. 2010. Search and clustering orders of magnitude faster than BLAST. Bioinformatics 26:2460–2461.

Edgar, R. C. 2013. UPARSE: highly accurate OTU sequences from microbial amplicon reads. Nature Methods 10:996–998.

FAO. 1990. Guidelines for soil description, third ed. Land and Water Development Division at the Food and Agriculture Organization of the United Nations (FAO), Rome.

Frey, B., T. Rime, M. Phillips, B. Stierli, I. Hajdas, F. Widmer, and M. Hartmann. 2016. Microbial diversity in European alpine permafrost and active layers. FEMS Microbiology Ecology 92:fiw018.

Gee, G.W., and J. W. Bauder. 1986. Particle-size analysis. Pages 383-411 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Hart, S. C, J. M. Stark, E. A. Davidson, and M. K. Firestone. 1994. Nitrogen mineralization, immobilization, and nitrification. Pages 985-1016 in R. W. Weaver, S. Angle, P. Bottomley, D. Bezdicek, S. Smith, A. Tabatabai, and A. Wollum, editors. Methods of soil analysis: Part 2—Microbiological and biochemical properties. Soil Science Society of America (SSSA) Inc., Madison.

Lauber, K., Wagner, G., 1996. Flora Helvetica. Flora der Schweiz. Haupt Verlag, Bern.

MeteoSchweiz, 2018. Klimabulletin Jahr 2017. MeteoSchweiz, Zürich.

Meyer, S. T., C. Koch, and W. W. Weisser. 2015. Towards a standardized rapid ecosystem function assessment (REFA). Trends in Ecology and Evolution 30:390-397.

Neff, F., M. C. Resch, A. Marty, J. Rolley, M. Schütz, A. C. Risch, and M. M. Gossner. 2020. Long-term restoration success of insect herbivore communities in semi-natural grasslands – a functional approach. Ecological Applications 0:e02133

Nguyen, N.H., Z. W. Song, S. T. Bates, S. Branco, L. Tedersoo, J. Menke, J. S. Schilling, and P. G. Kennedy. 2016. FUNGuild: an open annotation tool for parsing fungal community datasets by ecological guild. Fungal Ecology 20:241–248.

Nilsson, R. H., K.-H. Larsson, A. F. S. Taylor, J. Bengtsson-Palme, T. S. Jeppesen, D. Schigel, P. G. Kennedy, K. Picard, F. O. Glöckner, L. Tedersoo, I. Saar, U. Kõljalg, and K. Abarenkov. 2018. The UNITE database for molecular identification of fungi: handling dark taxa and parallel taxonomic classifications. Nucleic Acids Research 47:259–264.

Norman, R. J., and J. W. Stucki. 1981. The Determination of Nitrate and Nitrite in Soil Extracts by Ultraviolet Spectrophotometry. Soil Science Society of America Journal 45:347-353.

Oostenbrink, M. 1960. Estimating nematode populations by some selected methods. Pages 81-101 in J. J. Sasser, and W. R. Jenkins, editors. Nematology. Univ. of North Carolina Press, Chapel Hill.

Quast, C., E. Pruesse, P. Yilmaz, J. Gerken, T. Schweer, P. Yarza, J. Peplies, and F. O. Glöckner. 2013. The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research 41:590-596.

Resch, M. C., M. Schütz, U. Graf, R. Wagenaar, W.H. van der Putten, and A. C. Risch. 2019. Does topsoil removal in grassland restoration benefit both soil nematode and plant communities? Journal of Applied Ecology 56:1782-1793.

Schuldt, A., A. Ebeling, M. Kunz, M. Staab, C. Guimarães-Steinicke, D. Bachmann, N. Buchmann, W. Durka, A. Fichtner, F. Fornoff, W. Härdtle, L. R. Hertzog, A-N. Klein, C. Roscher, J. Schaller, von G. Oheimb, A. Weigelt, W. Weisser, C.Wirth, J. Zhang, H. Bruelheide, and N. Eisenhauer. 2019. Multiple plant diversity components drive consumer communities across ecosystems. Nature Communications 10:1460.

Tedersoo, L., M. Bahram, S. Põlme, U. Kõljalg, N. S. Yorou, R. Wijesundera, L. Villarreal Ruiz, A. M. Vasco-Palacios, P. Q. Thu, A. Suija, M. E. Smith, C. Sharp, E. Saluveer, A. Saitta, M. Rosas, T. Riit, D. Ratkowsky, K. Pritsch, K. Põldmaa, M. Piepenbring, C. Phosri, M. Peterson, K. Parts, K. Pärtel, E. Otsing, E. Nouhra, A. L. Njouonkou, R. H. Nilsson, L. N. Morgado, J. Mayor, T. W. May, L. Majuakim, D. J. Lodge, S. See Lee, K.-H. Larsson, P. Kohout, K. Hosaka, I. Hiiesalu, T. W. Henkel, H. Harend, L.-D. Guo, A. Greslebin, G. Grelet, J. Geml, G. Gates, W. Dunstan, C. Dunk, R. Frenkhan, L. Dearnaley, A. De Kesel, T. Dang, X. Chen, F. Buegger, F. Q. Brearley, G. Bonito, S. Anslan, S. Abell, and K. Abarenkov. 2014. Global diversity and geography of soil fungi. Science 346:1256688.

Thomas, G.W. 1982. Exchangeable cations. Pages 159-165 in A. L. Page, R. H. Miller, and D. R. Keeney, editors. Methods of Soil Analysis: Part 2—Chemical and microbiological properties. Soil Science Society of America (SSSA) Inc., Madison.

Walthert, L., U. Graf, A. Kammer, J. Luster, D. Pezzotta, S. Zimmermann, and F. Hagedorn. 2010. Determination of organic and inorganic carbon, δ13C, and nitrogen in soils containing carbonates after acid fumigation with HCl. Journal of Plant Nutrition and Soil Sciences 173:207-216.

Yeates, G. W., T. Bongers, R. G. M. de Goede, D. W. Freckman, and S. S. Georgieva. 1993. Feeding habits in soil nematode families and genera – an outline for soil ecologists. Journal of Nematology 25:315-331.

bacteria

display_name: bacteria

biodiversity

display_name: biodiversity

ecosystem-multifunctionality

display_name: ecosystem-multifunctionality

fungi

display_name: fungi

grassland

display_name: grassland

mineralization

display_name: mineralization

nematodes

display_name: nematodes

plants

display_name: plants

restoration

display_name: restoration

soil-biodiversity

display_name: soil-biodiversity

educ

en: Education, culture and sport

en: Restoring grassland multifunctionality


maintainer: EnviDat Support

en: runoff stable-water-isotopes groundwater alptal streamflow

state: active

type: dataset

en: Deuterium rainfall event A

media_type: text/csv

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date (year-month-day) and time (hours:minutes:seconds) in UTC
P d.D: Deuterium composition of the rainfall samples (per mil)
X: X coordinate (CH1903 LV03)
Y: Y coordinate (CH1903 LV03)

format: CSV

mimetype: text/csv

en: Precipitation and discharge event A

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
With any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date (year-month-day) and time (hours:minutes:seconds) in UTC
Q: Discharge in mm per hour at catchment outlet (697234,210472)
P: Rainfall in mm per hour averaged for two rain gauges (697494,210675) and (698004, 210680)

en: Deuterium rainfall event B

en: Precipitation and discharge extra event

en: Deuterium rainfall event C

en: Deuterium groundwater and baseflow August 2017

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

Date: Date (year-month-day)
Location: Well number or outlet
X: X coordinate (CH1903 LV03)
Y: Y coordinate (CH1903 LV03)
riparian: riparian wells (i.e. from the riparian-like cluster as presented in Kiewiet et al. (2019)) are marked a one, all other wells are marked a zero
d.D (per mil): Deuterium composition (per mil)

en: Deuterium streamwater event A

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date and time of sample collection (UTC; year-month-day, hours:minutes)
Q d.D: Deuterium composition (per mil) of streamwater sampled at the catchment outlet (697234,210472); the first sample is used as pre-event streamflow sample

en: Deuterium streamwater event C

en: Deuterium rainfall extra event

en: Deuterium groundwater and baseflow October 2017

en: Deuterium groundwater and baseflow October 2016

en: Deuterium streamwater extra event

en: Precipitation and discharge event B

en: Deuterium streamwater event B

en: Precipitation and discharge event C

en:
This dataset includes discharge and rainfall measurements and deuterium compositions of streamflow, rainfall and groundwater, for four rainfall events and three baseflow snapshot campaigns in the Studibach (Alptal, Switzerland). More specifically, we present the following data:

- Specific discharge at the catchment outlet at 5-minute resolution (mm per hour);
- Rainfall at 5-minute resolution (mm per hour);
- Rainfall deuterium composition (‰);
- Stormflow deuterium composition (‰);
- Groundwater and baseflow deuterium compositions (‰).

For the files containing rainfall and discharge timeseries (QP), and rainfall and streamwater deuterium compositions ("Deuterium_Rainfall" and "Deuterium_Streamwater"), we added the corresponding event identifier (A, B, C or extra) to the file names. For the files containing the groundwater and baseflow deuterium values ("Deuterium_Snapshot") we added the sample collection date to the file name. We included the X and Y coordinates for each data point (coordinate system: CH1903 LV3) as well as the date and time (UTC).

More information on the data collection and preparation can be found in Kiewiet et al. (in review). A detailed description of the baseflow snapshot campaigns can also be found in Kiewiet et al., 2019.

envidat

fr: EnviDat: le portail de données environnementales

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

en: Discharge, rainfall, and deuterium compositions of streamwater, rainwater and groundwater, for four rainfall events in the Studibach, Alptal, Switzerland


en: density gis buffer roads jupyter geospatial

format: SERVICE

media_type: application/zip

en: Road data from OSM for the surroundings of Menzberg, Switzerland

format: ZIP

mimetype: application/zip

en: Road Density Calculation (Python Notebook) online

en: Plots

en: Random plot locations

en:
This dataset contains the road and plot data used for the geospatial analysis example showcased in "Fostering Open Science at WSL with the EnviDat Environmental Data Portal", a contribution to the 5th Open Source Geospatial Research and Education Symposium (OGRS), 2018.
The example uses Jupyter Notebook to calculate road densities in the neighbourhood of sample plot locations with Python. Road data were extracted from OpenStreetMap, while the point data (sample plots) were generated manually.

buffer

display_name: buffer

density

display_name: density

geospatial

display_name: geospatial

gis

display_name: gis

jupyter

display_name: jupyter

roads

display_name: roads

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Dataset for OGRS 2018 publication


en: par long-term relative-humidity temperature climate-change meteorology precipitation swiss-forest-lab wind-speed meteo

en: Field station data (NOF)

en: Data file.

en: Data plot of the field station (NOF)

media_type: application/pdf

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

format: PDF

mimetype: application/pdf

en: Site photo of the forest station (NOB)

en: Site photo of the forest station from the side.

mimetype: image/jpeg

en: Data plot of the forest station (NOB)

en: Forest station data (NOB)

en: Site photo of the field station (NOF)

en: Site photo of the field station from the side.

en: Site aerial photo (Novaggio)

en: Site aerial photo from both Novaggio stations. Source: Google. 2016. Site aerial photo from both Novaggio stations. Retrieved November 15, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Novaggio in Switzerland where one station is located within a natural deciduous forest stand (NOB) with Turkey oak (_Quercus cerris_; 70 yrs), sweet chestnut (_Castanea sativa_; 90 yrs) and silver birch (_Betula pendula_; 70 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Novaggio is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Novaggio, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


en: precipitation long-term climate-change swiss-forest-lab par temperature meteo relative-humidity meteorology wind-speed

en: Data plot of the forest station (NEB)

en: Forest station data (NEB)

en: Data plot of the field station (NEF)

en: Site photo of the forest station (NEB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Field station data (NEF)

en: Site aerial photo (Neunkirch)

en: Site aerial photo from both Neunkirch stations. Source: Google. 2016. Site aerial photo from both Neunkirch stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Site photo of the field station (NEF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Neunkirch in Switzerland where one station is located within a natural deciduous forest stand (NEB) with European beech (_Fagus sylvatica_; 160 yrs), sycamore maple (_Acer pseudoplatanus_; 160 yrs) and lime trees (_Tilia sp._; 110 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NEF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Neunkirch is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Neunkirch, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: ecological-maps landolt ecological-indicator-values plants soil-moisture switzerland soil-ph soil-mapping

en: Description

en: Description of the predictors provided in this dataset

format: XLS

en: Predictors

en: Predictors generated and used in Descombes et al. (2020)

en:
Ecologically meaningful predictors are often neglected in plant distribution studies, resulting in incomplete niche quantification and low predictive power of species distribution models (SDMs). Because environmental data are rare and expensive to collect, and because their relationship with local climatic and topographic conditions are complex, mapping them over large geographic extents and at high spatial resolution remains a major challenge. Here, we derived environmental data layers by mapping ecological indicator values (EIVs) in space by using a large set of environmental predictors in Switzerland.

This dataset contains the predictors (raster layers) generated and used in the following publication (Descombes et al. 2020). Only predictors for which we have the rights to share them are provided. Other datasets and predictors can be accessed via the original data provider. Details on the predictors and sources are fully described in the publication. The predictors are provided as GeoTIFF files, at 93 m spatial resolution and Mercator projection ("+proj=merc +lon_0=0 +k=1 +x_0=0 +y_0=0 +ellps=WGS84 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs"). The excel file (xlsx) provides a short description of the raster layers.

Paper Citation:

Descombes, P. et al. (2020). Spatial modelling of ecological indicator values improves predictions of plant distributions in complex landscapes. Ecography. (accepted)

ecological-indicator-values

display_name: ecological-indicator-values

ecological-maps

display_name: ecological-maps

landolt

display_name: landolt

plants

display_name: plants

soil-mapping

display_name: soil-mapping

soil-moisture

display_name: soil-moisture

soil-ph

display_name: soil-ph

switzerland

display_name: switzerland


mosaic-snow-on-sea-ice-data

title_for_slug: mosaic-snow-on-sea-ice-data

en: drifting-and-blowing-snow surface-mass-balance snow-distribution spatial-variability arctic-sea-ice

en: SNOWPACK setup for MOSAiC

en:
 The zip file contains both input and output data as well as the model configuration as used in the submitted manuscript "Towards a fully physical representation of snow on Arctic sea ice using a 3D snow-atmosphere model".

The zip file contains 2 main folders:
* SNOWPACK_JGR_ALPHA1
* SNOWPACK_JGR_ALPHA3

In the SNOWPACK_JGR_ALPHA1 (reference "SP_R" simulation) and SNOWPACK_JGR_ALPHA3 (comparison "SP_C" scenario) folders you find the corresponding inputs, outputs and configuration as used in the paper, as well as the settings used - which only differ by the changed "SCHMIDT_DRIFT_FUDGE" value that is found in each SNOWPACK_JGR_ALPHA/setup/io.ini file. The input data is already linked accordingly in each io.ini file.

To reproduce the results, download and compile the source code for the adjusted SNOWPACK model first, which can be obtained from https://gitlabext.wsl.ch/snow-models/snowpack.git under the "snowpack_mosaic" branch. After installing, you can run the provided model setup uploaded here.

en: ALPINE3D setup for MOSAiC

en:
The zip file contains a folder structure that must be kept as it is in order to run the simulation in the current configuration.
The setup contains both input and output data as well as the model configuration as used in the submitted manuscript
"Towards a fully physical representation of snow on Arctic sea ice using a 3D snow-atmosphere model".

The zip file contains 3 main folders:
* base_setup_files
* a3d_jgr_alpha1
* a3d_jgr_alpha3

The "base_setup_files" contains all input files that are necessary to run the reference (R) simulation ("a3d_jgr_alpha1" folder) and the comparison "C" scenario ("a3d_jgr_alpha3") folder. In the a3d_jgr_alpha1 and a3d_jgr_alpha3 folders you find the corresponding outputs as used in the paper, as well as the settings used - which only differ by the changed "SCHMIDT_DRIFT_FUDGE" value that is found in each a3d_jgr_alphax/setup/io.ini file. The input data is already linked accordingly in each io.ini file.

a3d_jgr_alpha1 also contains the detailed snow profiles for each point along the transects.

To reproduce the results, download and compile the source code for the adjusted ALPINE3D model first, which can be obtained from https://gitlabext.wsl.ch/snow-models/alpine3d.git under the "alpine3d_mosaic" branch. After installing, you can run the provided model setup uploaded here.

en:
Data accompanying David Wagners' Dissertation.
Covers model results and various input from ALPINE3D and SNOWPACK adjusted for sea ice during MOSAiC.

arctic-sea-ice

display_name: arctic-sea-ice

drifting-and-blowing-snow

display_name: drifting-and-blowing-snow

snow-distribution

display_name: snow-distribution

spatial-variability

display_name: spatial-variability

surface-mass-balance

display_name: surface-mass-balance

en: MOSAIC Snow on Sea Ice Data


maintainer: Yohann Chauvier

en: environmental-stratification plant-species random-stratified-sampling survey-effort point-process-model covariate-correction cluster independent-dataset background-data target-group

en: Non-copyright data, scripts, diversity outputs

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

educ

en: Education, culture and sport

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models


en: adults-and-teenagers visual-attractiveness perception-of-ecosystem-services nfi-photos online-questionnaire-survey

en: Codebook to SPSS-file

en: Questionnaire Italian

en: Questionnaire French

en: Dataset in csv-format

en: Questionnaire German

en: SPSS-Dataset

en: This questionnaire survey was conducted as an online survey and aimed at investigating the relationship between physical forest characteristics, visual attractiveness of forest and the perception of ecological and cultural ecosystem services in urban forests. Each participant was shown 6 photos out of a pool of 50 photos taken from the Swiss National Forest Inventory (NFI) database. Physical forest characteristics were derived from the photos. The study was conducted as part of the "WaMos meets LFI" (WML) project.

adults-and-teenagers

display_name: adults-and-teenagers

nfi-photos

display_name: nfi-photos

online-questionnaire-survey

display_name: online-questionnaire-survey

perception-of-ecosystem-services

display_name: perception-of-ecosystem-services

visual-attractiveness

display_name: visual-attractiveness

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Relationship between physical forest characteristics, visual attractiveness and perception of ecosystem services in urban forests


maintainer: Mathias Bavay

en: snow-depth shortwave-radiation wind-direction soil-temperature air-temperature precipitation-sum dew-point-temperature treeline air-pressure relative-humidity wind-speed stillberg

en: The Davos Stillberg meteorological data (Stillberg_meteo_v1.1.zip) consists of timeseries from five meteorological stations operated at the Stillberg treeline ecological research site. Metadata are provided in the folder 'Stillberg_meteo_metadata' and the data in the folder 'Stillberg_meteo_data' with subfolders for the three quality levels 'raw_standardized', ‘raw_edited’, and ‘filtered’.

en: The Davos Stillberg meteorological data (Stillberg_meteo_v1.zip) consists of timeseries from five meteorological stations operated at the Stillberg treeline ecological research site. Metadata are provided in the folder 'Stillberg_meteo_metadata' and the data in the folder 'Stillberg_meteo_data' with subfolders for the three quality levels 'raw_standardized', ‘raw_edited’, and ‘filtered’.

en:
 Background information
The Stillberg ecological treeline research site is located in the transition zone between the relatively humid climate of the Northern Alps and the continental climate of the Central Alps. In 1975, 92,000 seedlings of the high-elevation conifer species *Larix decidua* Mill. (European larch), *Pinus cembra* L. (Cembran pine), and *Pinus mugo* ssp. *uncinata* (DC.) Domin (mountain pine) were systematically planted across an area of 5 hectares along an elevation gradient of about 150 metres, with the aim to develop ecologically, technically, and economically sustainable afforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Alongside the ecological long-term monitoring of the afforestation, several meteorological stations have recorded local meteorological conditions at the Stillberg research site. Here, we provide the Davos Stillberg meteorological timeseries of five stations from 1975 (01-01-1975), the year of the afforestation establishment, until the end of the year 2022 (31-12-2022).

 Station description
The five meteorological stations were all installed at the same location (46°46′25.015″N 9°52′01.792″E) at 2090 m a.s.l., in the lower part of the afforestation area. In general, the five stations were operated sequentially (Stillberg_meteo_metadata_stations_v1.csv). However, there are some overlapping time periods when more than one station was operated in parallel. The stations have recorded environmental parameters, such as air and soil temperature, dew point temperature, air pressure, relative humidity, wind direction and velocity, radiation, precipitation, and snow depth (Stillberg_meteo_metadata_parameters_v1.csv). The meteorological measurements were recorded hourly from 1975 until 1996 and have been recorded in 10-minute intervals since 1997.

 Data description
We processed the Davos Stillberg meteorological timeseries with the MeteoIO meteorological data pre-processing library (Bavay & Egger, 2014). Data files are provided for each station and quality level separately and named according to the station (see ‘Stillberg_meteo_metadata_stations_v1.csv’). From the raw data in their original formats, we generated three data quality levels: raw standardized (folder ‘raw_standardized’), edited (folder ‘raw_edited’) and filtered (folder ‘filtered’). The processing level is indicated in the headers of the data files. The whole processing protocol is described in a set of human-readable configuration files that are used by MeteoIO to generate the required data quality levels. This improves long-term reproducibility (Bavay et al., 2022), as the data could be regenerated in the future, even using a completely different software, to account for additional data points or to introduce new data corrections. The first quality level (raw standardized) is generated by parsing the original data files and interpreting them in order to convert all data points to a common format and meteorological parameter naming scheme, while excluding unreadable or duplicated data lines. The generated data files are derivatives of CSV files, with a standardised header that contains the metadata that are necessary to interpret and use the data (use metadata) and to populate a data index (search metadata). The latter is a textual implementation of the Attribute Convention for Data Discovery (ACDD) metadata standard (Attribute Convention for Data Discovery 1-3, 2022). The second quality level (edited) builds on the raw data by performing low-level data editing, such as removing some data periods that are known to be unusable (often based on maintenance records or anecdotal evidence) or applying undocumented calibration factors (for example, when there seems to be an obvious offset on a measured parameter for a period between two documented maintenance operations). The third quality level is generated by applying statistical filters on the data (per station and per meteorological parameter) to exclude presumably wrong values. We did not perform gap filling, as no single strategy could be relied upon that would work best for all possible data usage scenarios.

air-pressure

display_name: air-pressure

air-temperature

display_name: air-temperature

dew-point-temperature

display_name: dew-point-temperature

precipitation-sum

display_name: precipitation-sum

relative-humidity

display_name: relative-humidity

shortwave-radiation

display_name: shortwave-radiation

snow-depth

display_name: snow-depth

soil-temperature

display_name: soil-temperature

stillberg

display_name: stillberg

treeline

display_name: treeline

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

en: Long-term meteorological station Stillberg, Davos, Switzerland at 2090 m a.s.l.


maintainer: Franziska Gerber

en: antarctica cryowrf python consistent aws

en: Scripts to preprocess (and download for some databases) atmospheric weather station data. Furthermore, a list of stations and a map can be created to have an overview.

en:
There are many sources providing atmospheric weather station data for the Antarctic continent. However, variable naming, timestamps and data types are highly variable between the different sources. The published python code intends to make processing of different AWS sources from Antarctica easier. For all datasets that are taken into account variables are renamed in a consistent way. Data from different sources can then be handled in one consistent python dictionary.

The following data sources are taken into account:

* AAD: Australian Antarctic Division (https://data.aad.gov.au/aws)
* ACECRC: Antarctic Climate and Ecosystems Cooperative Research Centre by the Australian Antarctic Division
* AMRC: Antarctic Meteorological Research Center (ftp://amrc.ssec.wisc.edu/pub/aws/q1h/)
* BAS: British Antarctic Survey (ftp://ftp.bas.ac.uk/src/ANTARCTIC_METEOROLOGICAL_DATA/AWS/; https://legacy.bas.ac.uk/met/READER/ANTARCTIC_METEOROLOGICAL_DATA/)
* CLIMANTARTIDE: Antarctic Meteo-Climatological Observatory by the italian National Programme of Antarctic Research (https://www.climantartide.it/dataaccess/index.php?lang=en)
* IMAU: Institute for Marine and Atmospheric research Utrecht (Lazzara et al., 2012), https://www.projects.science.uu.nl/iceclimate/aws/antarctica.ph
* JMA: Japan Meteorological Agency (https://www.data.jma.go.jp/antarctic/datareport/index-e.html)
* NOAA: National Oceanic and Atmospheric Administration (https://gml.noaa.gov/aftp/data/meteorology/in-situ/spo/)
* Other/AWS_PE: Princess Elisabeth (PE), KU Leuven, Prof. N. van Lipzig, personal communication
* Other/DDU_transect: Stations D-17 and D-47 (in transect between Dumont d’Urville and Dome C, Amory, 2020)
* PANGAEA: World Data Center (e.g. König-Langlo, 2012)

Important notes

* Information about data sources is available. Some downloading scripts are included in the provided code. However, users should make sure to comply with the data providers terms and conditions.
* Given changing download options of the differnent institutions the above links may not permanently work and data has to be retrieved by the user of this dataset.
* No quality control is applied in the provided preprocessing software - quality control is up to the user of the datasets. Some dataset are quality controlled by the owner.

Acknowledgements
--------------------------
We thank all the data providers for making the data publicly available or providing them upon request. Full acknowledgements can be found in Gerber et al., submitted.

References
---------------
Amory, C. (2020). “Drifting-snow statistics from multiple-year autonomous measurements in Adélie Land, East
Antarctica”. The Cryosphere, 1713–1725. doi: 10.5194/tc-14-1713-2020

Gerber, F., Sharma, V. and Lehning, M.: CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB, JGR - Atmospheres, submitted.

König-Langlo, G. (2012). “Continuous meteorological observations at Neumayer station (2011-01)”. Alfred Wegener
Institute, Helmholtz Centre for Polar and Marine Research, Bremerhaven, PANGAEA, doi: 10.1594/PANGAEA.
775173

antarctica

display_name: antarctica

aws

display_name: aws

consistent

display_name: consistent

cryowrf

display_name: cryowrf

python

display_name: python

educ

en: Education, culture and sport

en: Preprocessing Antarctic Weather Station (AWS) data in python


maintainer: Sven-Eric Hopf

en: monitoring forest fraxinus ash-dieback iap

en: Monitoring of ash trees as part of the Intercantonal Forest Observation Programme

en: Packgroun information on data for the publication: Spread and Severity of Ash Dieback in Switzerland – Tree Characteristics and Landscape Features Explain Varying Mortality Probability, (Klesse et al. 2021, Front. For. Glob. Change 4:645920., doi: 10.3389/ffgc.2021.645920)

en:
In 2013, the Institute for Applied Plant Biology (IAP) started a monitoring programme to study the development and the spatial variation of the ash dieback disease with the aim to find some partially resistant European ash trees (Fraxinus excelsior).
We collaborate as co-authors for the publication: Spread and Severity of Ash Dieback in Switzerland - Tree Characteristics and Landscape Features Explain Varying Mortality Probability (Klesse et al. 2021 in frontiers)

ash-dieback

display_name: ash-dieback

forest

display_name: forest

fraxinus

display_name: fraxinus

iap

display_name: iap

monitoring

display_name: monitoring


en: wind-direction raclets anemometer wind-velocity wind wind-speed

en: Sonic wind component u

en:
The data contains values for u direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component v

en:
The data contains values for v direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component w

en:
The data contains values for w direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic temperature

en: The data set contains values of temperature (°C) measured with the anemometer at a sampling frequency of 20 Hz.

en: Sonic time

en: The data set contains the time in YYYY-mm-dd HH:MM:SS.sss for the anemometer data. The time is given in UTC+1.

en: A Young 81000 sonic anemomenter was deployed at Gotschnagrat (LON: 46.859 LAT: 9.849) to record three components of the wind velocity (u, v, w in [m s‾ ¹]) and air temperature (Ts in [°C]). The anemomenter was mounted in direction North at a height of 1.5 m above snow surface at the beginning. The time within each data set is given in UTC+1. Instrument specifications can be found [here](http://www.youngusa.com/Manuals/81000-90(I).pdf) .

anemometer

display_name: anemometer

raclets

display_name: raclets

wind

display_name: wind

wind-velocity

display_name: wind-velocity

envidat

en: EnviDat: the Environmental Data Portal

en: Snow Drift Station - 3D Ultrasonic


maintainer: Milojevic

en: reservoir-inflow return-periods low-flow extreme-values alpine-precipitation

en: Daily Luzzone Reservoir Inflow 01-01-2000 to 31-12-2019

en: Daily total water inflow to Luzzone reservoir. Natural inflow (LUZ_inflow_raw) is back-calculated based on daily water level in reservoir (removing hydropower inputs and spills). Linear interpolation between daily values is used to bring all inflow values into positive space (LUZ_inflow_intrp).

en: R codes for Extreme Values Analysis

en: Zip file containing R codes for running extreme value analyses for high precipitation and inflow events as well as code for determining return levels of low inflow and low precipitation events

en:
 Summary

* Dataset of daily inflow to Luzzone reservoir in Ticino, Switzerland

* R scripts used to generate return levels for low reservoir inflow, low precipitation, high inflow, and extreme high precipitation based on various methods from extreme value analysis

 Data
The dataset included here is the "natural" reservoir inflow for the Luzzone reservoir.
Additional analyses were conducted on daily total precipitation of 6 meteorological stations (abbreviations: TIOLI, TIOLV, COM, VRN, VLS, ZEV). These precipitation data are freely available for teaching and research from the MeteoSwiss IDAweb portal (https://www.meteoswiss.admin.ch/services-and-publications/service/weather-and-climate-products/data-portal-for-teaching-and-research.html).

 Codes
R scripts used to determine return levels of the data set are included for both extreme high events and low events. The scripts include the following methods for calculating return levels:

* GEV (Generalized Extreme Value)

* GPD and GPDd (Generalized Pareto Distribution including declustered version)

* eGPD (extended Generalized Pareto Distribution)

* MEV (Metastatistical Extreme Value)

alpine-precipitation

display_name: alpine-precipitation

extreme-values

display_name: extreme-values

low-flow

display_name: low-flow

reservoir-inflow

display_name: reservoir-inflow

return-periods

display_name: return-periods

educ

en: Education, culture and sport

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data and Code on Extreme Inflow and Lowflow Analysis for Alpine Reservoirs


en: long-term meteo par swiss-forest-lab precipitation wind-speed climate-change meteorology relative-humidity temperature

en: Field station data (SCF)

en: Data file.

en: Site photo of the forest station (SCB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Site aerial photo (Schänis)

en: Site aerial photo from both Schänis stations. Source: Google. 2016. Site aerial photo from both Schänis stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Forest station data (SCB)

en: Data plot of the field station (SCF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the forest station (SCB)

en: Site photo of the field station (SCF)

en: Site photo of the field station from above (viewing downwards the slope).

en: Further details on the data repository

en: Meta data documentation.

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Schänis in Switzerland where one station is located within a natural mixed forest stand (SCB) with European beech (_Fagus sylvatica_; 130-150 yrs), European silver fir (_Abies alba_; 130-150 yrs) and European ash (_Fraxinus excelsior_; 130-150 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, SCF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Schänis is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Schänis, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1998 onwards


en: urban-ecology electrodermal-activity landscape place-attachment sense-of-place

en: 02. Questionnaire Data

en: 05. Visuals

en: 00. EDA Raw Data

en: 01. EDA Processed Data

en: 04. Scripts

en: 03. Publication Ready Data

en: This repository contains data on EDA measurements of visitors with different cultural backgrounds in virtual urban park settings. The parks are a Persian garden (Shiraz, Iran) and a historical park in Zurich, Switzerland. The cultural background of the visitors is Persian and Central European. The repository contains raw data from EDA, processed time series and statistical procedures.

electrodermal-activity

display_name: electrodermal-activity

landscape

display_name: landscape

place-attachment

display_name: place-attachment

sense-of-place

display_name: sense-of-place

urban-ecology

display_name: urban-ecology

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Electrodermal Activity (EDA) of Bi-cultural Visitors In Virtual Park Settings


maintainer: Henning Löwe

en: angle-of-repose discrete-element-modelling granular-snow grain-shape fast-sintering

media_type: text/plain

format: TXT

mimetype: text/plain

en: Angle of repose and 3D CT images

en:
5 Snow types were examined and glass beads as a cohesion-less reference, named as follows:

RG: rounded grains (sieved with 0.7 - 1.4 mm)

FC: faceted grains (1.4 - 2 mm)

FCS: small faceted grains (0.7 - 1.4 mm)

IB: ice beads (4 mm)

IBS: small ice beads (2 - 2.2 mm)

GB: glass beads(2 mm)

en:
Angle of repose experiments were performed with different snow types at temperatures between -2 and -40°C. They were used to examine granular snow dynamics on the grain-scale with focus on the role of grain shape and cohesion. The angle of repose was observed by sieving snow onto a round, freestanding base until a stationary heap was formed.

This dataset consists of 1) the images of the experimental heaps that were taken to determine the angle of repose, 2) one binary 3D micro computed tomography image of each snow type. The CT images were taken with the SLF micro-CT40 to characterize snow properties and grain shape.

The experiments with natural snow types (rounded and faceted grains) and spherical model snow allowed for an examination of the differences in granular properties between natural grain shapes and spherical particles in view of Discrete Element Modelling. With the chosen temperatures, the effect of sintering could be observed that increases the angle of repose with increasing temperature.

angle-of-repose

display_name: angle-of-repose

discrete-element-modelling

display_name: discrete-element-modelling

fast-sintering

display_name: fast-sintering

grain-shape

display_name: grain-shape

granular-snow

display_name: granular-snow

en: Angle of repose experiments with natural and spherical snow


sensitivity-of-modeled-snow-instability

maintainer: Bettina Richter

title_for_slug: sensitivity-of-modeled-snow-instability

en: snowpack global-sensitivity-analysis numerical-avalanche-forecasting snow-cover-modeling snow-instability

en: Reference run

en: Reference run for the sensitivity analysis at Weissfluhjoch field site for winter season 2016-2017. Meteorological data from the automatic weather stations are used. No biases were introduced to the input data.

en: Case ALL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the whole simulation period. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Manually observed snow profiles

en: Manually observed snow profiles at Weissfluhjoch field site for winter season 2016-2017, including layer depth, hand hardness, grain size and grain shape for each layer.

en: Case WL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the period of weak layer formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Case SL

en: Extracted output data for case SL. Here biases were introduced to meteorological input data during the period of slab formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: We investigated the sensitivity of modeled snow instability to meteorological input data using SNOWPACK. We therefore used input data from the automatic weather station at the Weissfluhjoch field site for the year 2016-2017. We investigated three scenarios and performed 14'000 simulations for each scenario. The dataset contains extracted output data from modeled SNOWPACK simulations, including setup files to reproduce the simulations. For further information read the README file.

global-sensitivity-analysis

display_name: global-sensitivity-analysis

numerical-avalanche-forecasting

display_name: numerical-avalanche-forecasting

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

snowpack

display_name: snowpack

en: Sensitivity of modeled snow instability


maintainer: Marco Moretti

en: honeybees gardens zurich pollinator-experiment resource-availability urban-biodiversity wild-bees urban-ecosystems bettergardens city4bees urbanization beekeeping

en:
The data contains the following columns:

  SiteID: numeric, the identity of the garden where the bee was sampled.
  Taxonname: character, species name
  Lecty: numeric discreet, a mesure of specialisation degree. Levels: 1 = monolectic; 2=oliolectic; 3=polilectic
  Pheno.start= numeric discreet, the starting week of the flying activity.
  Pheno.end= numeric discreet, the ending week of the flying activity.
  Pheno.duration=numeric discreet, Pheno.end - Pheno.start
  Daytime.activity = numeric continuous, individual-level measure of the day hour when the bee was sampled
  ITD = numeric continuous, individual-level measure of the InterTegular Distance, a metric of mobility in mm.
  Rel.tongue.length =numeric continuous, individual-level measure of the relative tongue length (Tongue length / ITD), a metric of specilaisation degree, in mm.

en:
Mean, standard deviation , minimum and maximum values of six functional traits. The data has the following structure:
- Bee_species: bee scientific name
- mean_trait: mean value
- sd_trait: standard deviation
_min_trait: minimum value
- max_trait: maximum value
- trait: the six traits used. ITD = Intertegular distance (mm); Pheno.duration = duration of the phenology; Pheno.start = start of the phenology; Pheno.end = end of the phenology; Rel.tongue.length= relative tongue length (mm); Daytime.activity = daily activity (h)
DistNichePart: functional dissimilarity in a multidimentional trait space defined by five traits between wild bee individuals of a wild bee species and the honeybee individuals. Values are at the species level.

en: Metadata for the predictor and response dataset

en: Response and predictors used for the SEMs

en: Metadata for the predictors and response dataset

en:
Cities are socio-ecological systems that filter and select species, thus establishing unique species assemblages and biotic interactions. Urban ecosystems can host richer wild bee communities than highly intensified agricultural areas, specifically in resource-rich urban green spaces such as allotment and family gardens. At the same time, urban beekeeping has boomed in many European cities, raising concerns that the fast addition of a large number of managed bees could deplete the existing floral resources, triggering competition between wild bees and honeybees. The data has been used to investigated the interplay between resource availability and the number of honeybees at local and landscape scales and how this relationship influences wild bee diversity.

This dataset contains the raw and processed data supporting the findings from the paper: "Low resource availability drives feeding niche partitioning between wild bees and honeybees in a European city".

The data contains:
1. Bee trait measurements at the species and individual-level of five functional traits.
2. The values of the feeding niche partitioning (functional dissimilarity to honeybees)
3. The predictors of resource availability and beekeeping intensity at local and landscape scales used in the modelling of the paper for the 23 experimental sites.

beekeeping

display_name: beekeeping

bettergardens

display_name: bettergardens

gardens

display_name: gardens

honeybees

display_name: honeybees

pollinator-experiment

display_name: pollinator-experiment

resource-availability

display_name: resource-availability

urban-biodiversity

display_name: urban-biodiversity

urban-ecosystems

display_name: urban-ecosystems

urbanization

display_name: urbanization

wild-bees

display_name: wild-bees

zurich

display_name: zurich

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Niche partitioning between wild bees and honeybees


maintainer: Athanasios Nenes

en: sigma-w raclets ccn cloud-droplets dmt-ccn-chamber hygroscopicity cloud-modeling supersaturation weissfluhjoch

en: CCN data Weissfluhjoch

en:
In-situ CCN measurements were conducted between February 24 and March 8 2019 at Weissfluhjoch. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* Filtered CCN number concentrations (in cmˉ³) measured at 6 discrete supersaturations (SS) ranging from 0.09% to 0.74%. The name of each CCN column is indicative of the SS developed within the instrument.
* Instrument characteristics such as sample temperature (in °C) and pressure (in mbar)
* A code that refers to the reason of filtering.

Missing or filtered CCN values are indicated by "-999", while a declaration of each "Error_code" can be found in the following list:

_Error_code_:

0000: Measurements without error

1000: Period of transient operation after a supersaturation change

2000: Sharp change (decrease) in the room temperature housing the instrument, which induces a reset in column temperature

3000: Irregular values in the room temperature housing the instrument

9999: Missing data

en: Predicted cloud droplet number concentrations Weissfluhjoch

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Weissfluhjoch station between February 24 and March 8 2019. For this, a hygroscopicity parameter of 0.25 is assumed, according to the CCN-derived values. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Hygroscopicity parameter Weissfluhjoch

en:
The aerosol hygroscopicity parameter is derived combining the CCN and SMPS size distribution data collected between February 24 and March 8 2019 at Weissfluhjoch. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The instrument supersaturation (SS%)
* The calculated hygroscopicity parameter (kappa)
* The calculated critical dry diameter of the particles (Dcr) in nm.

Missing values are indicated by "-999".

en:
Cloud Condensation Nuclei (CCN) data: A Droplet Measurement Technologies (DMT) single-column continuous-flow streamwise thermal gradient chamber (CFSTGC; Roberts and Nenes, 2005) was deployed at the measurement site Weissfluhjoch (2700 m a.s.l., LON: 9.806475, LAT: 46.832964) to record the in-situ CCN number concentrations between February 24 and March 8 2019 for different supersaturations (SS). To account for the difference between the ambient (~735 mbar) and the calibration pressure (~800 mbar), the SS reported by the instrument is adjusted by a factor of 0.92. The CFSTGC was cycled between 6 discrete SS values ranging from 0.09% to 0.74%, producing a full CCN spectrum every hour. The raw CCN measurements are filtered to discount periods of transient operation and whenever the room temperature housing the instrument changed sufficiently to induce a reset in column temperature. Additional information can be found in Section 2.1.2 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

Hygroscopicity data: The CCN number concentration measurements were directly related to the size distribution and total aerosol concentration data measured by the Scanning Mobility Particle Size Spectrometer (SMPS) instrument at the same station (https://www.envidat.ch/dataset/aerosol-data-weissfluhjoch) to infer the particles hygroscopicity parameter (kappa). For each SMPS scan, the particles critical dry diameter (Dcr) is estimated by integrating backward the SMPS size distribution, until the aerosol number matches the CCN concentration observed for the same time period as the SMPS scan. Assuming the particle chemical composition is internally mixed, the kappa is determined from Dcr and SS, applying Köhler theory. Additional information can be found in Section 2.2 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

Predicted cloud droplet numbers: Droplet calculations are carried out with the physically based aerosol activation parameterization of Morales and Nenes (2014), employing the “characteristic velocity” approach of Morales and Nenes (2010). Aerosol size distribution observations required to predict the cloud droplet numbers and maximum in-cloud supersaturation are obtained from the SMPS instrument deployed at Weissfluhjoch. The required vertical velocity measurements are derived from the wind Doppler Lidar (https://www.envidat.ch/dataset/lidar-wind-profiler-data) deployed at Davos Wolfgang and are extracted for the altitude of interest, being 1100 m above ground level for Weissfluhjoch. Additional information can be found in Section 2.3 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

ccn

display_name: ccn

cloud-droplets

display_name: cloud-droplets

cloud-modeling

display_name: cloud-modeling

dmt-ccn-chamber

display_name: dmt-ccn-chamber

hygroscopicity

display_name: hygroscopicity

raclets

display_name: raclets

sigma-w

display_name: sigma-w

supersaturation

display_name: supersaturation

weissfluhjoch

display_name: weissfluhjoch

en: CCN, hygroscopicity, predicted cloud droplet numbers Weissfluhjoch


en: dust particles snow deposition turbulence atmosphere hill

en: preferential deposition patterns of all simulations performed

en: The data consist of matlab files. Each files contains a 2D array with the values of deposition at the surface nodes. Each array has Nx x Ny values. Please refer to the original paper for additional information on the spatial resolution and grid size.

en:
Preferential deposition of snow and dust over complex terrain is responsible for a wide range of environmental processes, and accounts for a significant source of uncertainty in surface mass balances of cold and arid regions. Despite the growing body of literature on the subject, previous studies reported contradictory results on the location and magnitude of deposition maxima and minima. This study aims at unraveling the governing processes of preferential deposition in neutrally stable atmosphere and to reconcile seemingly inconsistent results of previous works. For this purpose, a comprehensive modeling approach is developed, based on large eddy simulations of the turbulent airflow, Lagrangian stochastic model of particle trajectories, and immersed-boundary method to represent the underlying topography. The model performance is tested against wind tunnel measurements of dust deposition around isolated and sequential hills. A scale analysis is then performed to investigate the dependence of snowfall deposition on the particle Froude and Stokes numbers, which fully account for the governing processes of inertia, flow advection, and gravity. Additional simulations are performed, to test whether the often used assumption of inertialess particles yields accurate deposition patterns. We finally show that our scale analysis provides qualitatively similar results for hills with different aspect ratios.

This dataset contains the results of the LES-LSM model. Each Matlab file contains a 2D array of deposition values (in kg/m2) in each surface node (ix, iy) of the Cartesian grid. The file names are consistent with the simulation numbers listed in the original paper. For additional information, please refer to "Preferential deposition of snow and dust over hills: governing processes and relevant scales" by F. Comola, M. G. Giometto, S. T. Salesky, M. B. Parlange, and M. Lehning, Journal of Geophysical Research: Atmospheres, 2019.

atmosphere

display_name: atmosphere

deposition

display_name: deposition

dust

display_name: dust

hill

display_name: hill

particles

display_name: particles

snow

display_name: snow

turbulence

display_name: turbulence


en: landuse wrf cosmo-wrf cryowrf static-data topography

en: Static data for WRF - Landuse

en:
Example GEOGRID.TBL to use with the 1s static data;
Note about naming:
* 121 -> 1-2-1 topography smoothing applied to dataset
* 1 -> one smoothing cycle applied to the data (needs to be changed depending on the chosen resolution to avoid too steep slope angles)

en: Static data for WRF - Topography

en: Static data for WRF - Soiltype bottom

en: Documentation

en: Documentation of the dataset

en: Example namelist.wps to use with the 1s static data

en: Static data for WRF - Soiltype top

en: Static input data (topography, landuse and soiltype) for the WRF preprocessing system WPS is provided for Switzerland and its neighboring countries between 45-49 N and 4-12 E. The data is provided at a resolution of 1 s. Topography is based on the Aster dataset, while landuse is extracted from the Corine landuse dataset. Soil type is set to silty clay loam for the entire domain. This static input data is valid for WRF and CRYOWRF.

cosmo-wrf

display_name: cosmo-wrf

cryowrf

display_name: cryowrf

landuse

display_name: landuse

static-data

display_name: static-data

topography

display_name: topography

wrf

display_name: wrf

educ

en: Education, culture and sport

en: High resolution static data for WRF over Switzerland


radar-wind-profiler-davos-wolfgang

maintainer: Maxim Hervo

title_for_slug: radar-wind-profiler-davos-wolfgang

en: wind-speed wolfgangpass wind-direction radar raclets

en: Radar Wind Profiler Data

en: A Vaisala Lap3000 was installed at Davos Wolfgang to record wind profiles. The time format is number of days fom January 0, 0000 in UTC with a 10 minute resolution.

en: The RADAR wind profiler from Meteoswiss was installed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577) and measured from 2171 m above sea level to 11079 m, with a temporal resolution of 10 minutes.

raclets

display_name: raclets

radar

display_name: radar

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

wolfgangpass

display_name: wolfgangpass

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: RADAR Wind profiler Davos Wolfgang


soil-respiration-exclosure-experiment

title_for_slug: soil-respiration-exclosure-experiment

en: grazing soil-respiration subalpine grassland ungulates

en: Soil respiration Switzerland

en:
ID: Fence number

Year	:Year of sampling

mean.CO2: soil respiration measured with PP-systems SRC-1 soil respriation chamber attached to a EGM-4 infrared gas analyser; units CO2 g m-2 h-1

Grassland: Grasslands where fences were errected. Note that on large grasslands (STAB, GRIM, MING) 2 pairs of fences were errected (2 in short, 2 in tall-grass vegetation), on small grasslands (DADA, MARG, BOTS) only one pair of fences was errected (1 short-grass; one-tallgrass vegetation)

Fence: Fence number; un-even numbers on short-grass vegetation (1,3,5,7,9,11,13,15,17), even numbers on tall-grass vegetation (2,4,6,8,10,12,14,16,18)

Vegetation:	1 = shortgrass vegetation, 2 = tall-grass vegetation (9 replicate fences on each vegetation type)

Treatment	: 1 = all herbivores grazing, 2 = large ungulates (red deer, chamois) excluded

en:
Location of data collection
The Swiss National Park (SNP) is located in the southeastern part of Switzerland, and covers an area of 170 km2, 50 km2 of which is forested, 33 km2 is occupied by alpine and 3 km2 by subalpine grasslands. Elevations range from 1350 to 3170 m a.s.l., and mean annual precipitation and temperature are 871 mm and 0.6°C measured at the Park’s weather station in Buffalora (1980 m a.s.l.) between 1960 and 2009 (MeteoSchweiz 2011). Founded in 1914, the SNP received minimal human disturbance for almost 100 years (no hunting, fishing, or camping, visitors are not allowed to leave the trails). Large (> 1 ha) homogeneous patches of short- and tall-grass vegetation characterize the subalpine grasslands. The average vegetation height of short-grass vegetation is 2 to 5 cm. Red fescue (Festuca rubra L.), quaking grass (Briza media L.) and common bent grass (Agrostis tenuis Sipthrob) are the predominating plant species in this vegetation type. Tussocks of evergreen sedge (Carex sempervirens Vill.) and mat grass (Nardus stricta L.) are predominant in the tall-grass vegetation, which averages 20 cm in vegetation height (Schütz and others 2006). Short-grass vegetation developed in areas where cattle and sheep rested (high nutrient input) during agricultural land-use (from 14th century until 1914); tall-grass vegetation developed in areas where cattle and sheep used to graze, but did not rest (Schütz and others 2003, 2006). Herbivores were shown to consume > 60% of the biomass in short-grass compared to < 20% in tall-grass vegetation (Schütz and others 2006). The herbivore community present in the SNP can be divided into four groups based on body size/weight: large [red deer (Cervus elaphus L.) and chamois (Rupricapra rupricapra L.); 30 - 150 kg], medium [marmot (Marmota marmota L.) and snow hare (Lepus timidus L.); 3 – 6 kg], and small vertebrate herbivores (small rodents: e.g. Clethrionomys spp., Microtus spp., Apodemus spp.; 30 – 100 g) as well as invertebrates (e.g. grasshoppers, caterpillars, cicadas, < 5 g).

Experimental design
We selected 18 subalpine grassland sites (9 short-grass, 9 tall-grass vegetation). The sites were spread across the entire park on dolomite parent material at altitudes of 1975 to 2300 meters. At each site we established an exclosure network (fences) in spring 2009 (early June), immediately after snowmelt. Each exclosure network consisted of a total of five 2 × 3 m sized plots that progressively excluded the different herbivores listed above (further labeled according to the herbivore guilds that had access to the respective plots “All”, “Marmot/Mice/Invertebrates”, “Mice/Invertebrates”, “Invertebrates”, “None”). The “All” treatment was thus accessible to all herbivores, was not fenced and was located at least 5 m away from a 2.1 m tall and 7 × 9 m main fence that enclosed the other four treatments. This fence was constructed of 10 × 10 cm wooden posts and electrical equestrian tape (AGRARO ECO, Landi, Bern, Switzerland; 20 mm width) mounted at 0.7 m, 0.95 m, 1.2 m, 1.5 m and 2.1 m above the ground that were connected to a solar charged battery (AGRARO Sunpower S250, Landi, Bern, Switzerland). We also mounted non-electrically charged equestrian tape at 0.5 m to help exclude deer and chamois, yet allow marmots and hares to enter safely. Within each main fenced area we randomly established four 2 × 3 m plots: (1) The “Marmot/Mice/Invertebrates” plot remained unfenced, thus, with the exception of red deer and chamois, all herbivores were able to access the plot, (2) The “Mice/Invertebrates” plot consisted of a 90 cm high electric sheep fence (AGRARO Weidezaunnetz ECO, Landi, Bern, Switzerland; mesh size 10 × 10 cm) connected to the solar panel and excluded all medium sized mammals (marmots, hares), but provided access for small mammals and invertebrates, (3) The “Invertebrates” plot provided access for invertebrates only and was surrounded by 1 m high metal mesh (Hortima AG, Hausen, Schweiz; mesh size 2 × 2 cm), (4) The “None” plot was surrounded by a 1 m tall mosquito net (Sala Ferramenta AG, Biasca, Switzerland; mesh size 1.5 × 2 mm) to exclude all herbivores. This plot was covered with a roof constructed of a wooden frame lined with mosquito mesh that was mounted on the wooden corner posts. We also treated this plot with a biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) when needed to remove insects that might have entered during data collection or that hatched from the soil.

!!! The here published data set only contains data for “All”, and “Marmot/Mice/Invertebrates” (= ungulates excluded) plots !!!

Data collection
In-situ soil CO2 emissions were measured with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA) on two randomly selected locations on one subplot within each of the 90 plots. For each measurement the soil chamber (15 cm high; 10 cm diameter) was placed on a permanently installed PVC collar (10 cm diameter) driven five centimeters into the soil at the beginning of the study (June 2009). The measurements were conducted between 0900 and 1700 hours every two weeks from early to early September 2009, 2010, 2011 and 2013. Freshly germinated plants growing within the PVC collars were removed prior to each measurement to avoid measuring plant respiration/photosynthesis. The two measurements collected per plot every two weeks were averaged.

Please acknowledge the funding of the study: funded by the Swiss National Science Foundation, SNF grant-no 31003A_122009/1 to Anita C. Risch, Martin Schütz and Flurin Filli

grassland

display_name: grassland

grazing

display_name: grazing

soil-respiration

display_name: soil-respiration

subalpine

display_name: subalpine

ungulates

display_name: ungulates

en: Soil respiration - exclosure experiment


en: COST European Snow Booklet (ESB)

en: Please find here the web version of the COST European Snow Booklet (ESB).

en: European Snow Booklet public metadata

en:
The core of the European Snow Booklet (ESB), the country reports of 38 European countries, are based on information and metadata on snow measurements collected through a comprehensive survey, the ESB Questionnaire, between August 2017 and March 2018. The station metadata (for example location, elevation, measurement start date) from each country was provided by one or several institutions responsible for snow observations. By answering the questionnaire the contacts agreed that the information and metadata provided could be presented in the ESB. For cases where institutions indicated that information on station locations could be made publicly available, the metadata for the variables snow depth (HS), depth of snowfall (HN) and water equivalent of the snow cover (SWE), is additionally provided here for download (METADATA.xlsx).
Please note that not all institutions gave permission to publish their station metadata. This metadata has to be requested from the non-personal institution contacts provided in the METADATA.xlsx file. In some cases, however, no institutional contact is available and thus the contact of the country representative who filled in the questionnaire is used.
For current, updated station metadata we refer to the (non-personal) institutional contacts provided in METADATA.xlsx and/or the institution webpages. Note, however, that we cannot guarantee for completeness of the dataset for all countries because operational networks are prone to changes.

en: List of authors and list of the editorial board of the European Snow Booklet

en:
Here you can find the list of all lead authors of the different chapters of the European Snow Booklet (ESB).
In addition a list of the editorial board that reviewed the ESB is given.

en: European Snow Booklet unpublished metadata

en: The entire station metadata of all European institutions that contributed data is stored in METADATA_unpublished.xlsx. This file, however, cannot be accessed, since not all institutions gave permission to publish their station metadata. If you wish to access the metadata, please send a request to marty@slf.ch stating clearly why you want to access these metadata. NOTE: in this file ONLY station metadata (Lat/Lon/Altitude) is given, NO measured snow depth data.

en: COST European Snow Booklet (ESB) - DORA Link

media_type: text/html

en: DORA Link of the COST European Snow Booklet (ESB).

format: HTML

en:
The European Snow Booklet (ESB) is a book of reference for snow measurements that has been produced through collaboration with many European snow practitioners and snow scientists in the framework of the European Cooperation in Science and Technology (COST) Action ES1404 “A European network for a harmonised monitoring of snow for the benefit of climate change scenarios, hydrology and numerical weather prediction (HarmoSnow)”. The ESB provides a unique collection of information about operational snow observations in the European countries and the methods used to perform basic measurements of snow on the ground: snow depth (HS), depth of snowfall (HN), water equivalent of the snow cover (SWE) and presence of snow on the ground (PSG). Information and station metadata (for example location, elevation) for these basic snow variables were collected through a comprehensive survey, the ESB questionnaire between August 2017 and March 2018. Numerous institutions of 38 European countries provided detailed information describing the status of the operational snow observations and the methods used at the time of the survey. Based on the information provided, a country report was written for each European country. Similarities and differences among the countries, that is, the choice of snow variables to be measured, the measurement principles applied, the number of stations, or the spatial and elevational station distribution are pointed out. Thus the collection of country reports demonstrates the relevance of snow measurements for each country. Thus, the intention of the ESB is to foster better knowledge transfer regarding snow measurements between the snow science and operational communities and to improve the communication of information to the general public.

For detailed information on the European countries, we refer to the ESB, which can be downloaded here (envidat.ch). Please note that the ESB is not a living document and information and station metadata are from August 2017 till March 2018, except for Latvia (metadata updated in December 2018).

depth-of-snowfall

display_name: depth-of-snowfall

harmonisation-of-snow-measurements

display_name: harmonisation-of-snow-measurements

snow-depth

display_name: snow-depth

snow-measurement-methods

display_name: snow-measurement-methods

water-equivalent-of-the-snow-cover

display_name: water-equivalent-of-the-snow-cover

en: European Snow Booklet – an Inventory of Snow Measurements in Europe


aerosol-data-weissfluhjoch

title_for_slug: aerosol-data-weissfluhjoch

en: ice-nucleation linda inp particles aerosol raclets

en: APS Dataset Weissfluhjoch

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Weissfluhjoch.

mimetype: application/x-netcdf

en: OPC-N3 Dataset Weissfluhjoch

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: OPC-GT526S Dataset Weissfluhjoch

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en: SMPS Dataset Weissfluhjoch

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity) in a temporal resolution of 2 minutes, with time in UTC, measured at Weissfluhjoch.

en: LINDA Dataset Weissfluhjoch

en: The LINDA file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Weissfluhjoch (LON: 9.806475, LAT: 46.832964). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs), and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (SMPS 3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3787 TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and LINDA: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l min‾¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the LED based Ice Nucleation Detection Apparatus (LINDA, University of Basel) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

linda

display_name: linda

particles

display_name: particles

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Aerosol Data Weissfluhjoch