maintainer: Merin Reji Chacko

en: dna-metabarcoding environmental-dna spatial-ecology biomonitoring biodiversity-assessment

en: Analysis and Figures

en: This zipped file includes R scripts and the datasets required to run the analyses. A README describes the columns in each dataset.

en: Field Metadata

en: Information concerning the locations and times of sampling, as well as the identity of the samplers and relevant comments.

en: Genomic data

en: Fastq files, primer descriptions and the final output dataset.

en: This dataset contains the results of a five-day field excursion which the extent to which eDNA sampling can capture the diversity of a region with highly heterogeneous habitat patches across a wide elevation gradient through multiple hydrological catchments of the Swiss Alps. Using peristaltic pumps, we filtered 60 L of water at five sites per catchment for a total volume of 1 800 L. Using an eDNA metabarcoding approach focusing on vertebrates and plants, we detected 86 vertebrate taxa spanning 41 families and 263 plant taxa spanning 79 families across ten catchments. This dataset includes two sets of data. The first (Genomic data) includes all the necessary data for the bioinformatic pipeline, whereas the second (Analysis Figures) contains tidied data and scripts for the reproduction of all figures/analyses in the article describing this study.

biodiversity-assessment

display_name: biodiversity-assessment

biomonitoring

display_name: biomonitoring

dna-metabarcoding

display_name: dna-metabarcoding

environmental-dna

display_name: environmental-dna

spatial-ecology

display_name: spatial-ecology

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Vertebrate and plant taxa recovered from 10 catchments in Vaud using an eDNA-metabarcoding approach


maintainer: EnviDat Support

en: sintering snow-avalanche snow-mechanics acoustic-emissions snow snow-failure viscous-deformation fiber-bundle-model

state: active

type: dataset

en: fiber-bundle-model-for-snow-failure

media_type: application/zip

en: Data underlying Figures in publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted to "Geophysical Research Letters"

format: ZIP

mimetype: application/zip

en:
This dataset contains modeled and experimental results for laboratory snow failure experiments and the concurrent acoustic emissions signatures for different loading rates. For modelling the snow failure we used a fiber bundle model that includes sintering and viscous deformation.

The data underlay the figures in the publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted for publication to "Geophysical Research Letters".

acoustic-emissions

display_name: acoustic-emissions

fiber-bundle-model

display_name: fiber-bundle-model

sintering

display_name: sintering

snow

display_name: snow

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-mechanics

display_name: snow-mechanics

viscous-deformation

display_name: viscous-deformation

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Fiber Bundle Model for snow failure and concurrent Acoustic Emissions


en: weissfluhjoch ice-layers water-front snow-temperature snow-stratigraphy snowmicropen

en: WFJ_ICE_LAYERS dataset

en: README

media_type: text/plain

format: TXT

mimetype: text/plain

en: The WFJ_ICE_LAYERS dataset contains multi-instrument snowpack measurements at high temporal resolution, which enable to monitor the formation of deep ice layers due to preferential water flow, at the Weissfluhjoch research site, Davos, Switzerland. It covers the winter 2016/2017, with a focus on the early melting season. This dataset includes traditional snowpack profiles (weekly resolution, 15/11/2016-29/05/2017), SnowMicroPen penetration resistance profiles (daily resolution, 01/02/2017-19/04/2017), snow temperatures measured at different heights in the snowpack (half-hourly resolution, 01/03/2017-15/04/2017) and the water front height derived from an upward-looking ground penetrating radar (3-hour resolution, 04/03/2017-08/04/2017). The measurements are complemented by initialization files for SNOWPACK model simulations with the ice reservoir parameterization at Weissfluhjoch for the winter 2016/2017.

ice-layers

display_name: ice-layers

snow-stratigraphy

display_name: snow-stratigraphy

snow-temperature

display_name: snow-temperature

snowmicropen

display_name: snowmicropen

water-front

display_name: water-front

weissfluhjoch

display_name: weissfluhjoch

en: WFJ_ICE_LAYERS: Multi-instrument data for monitoring deep ice layer formation in an alpine snowpack


en: land-use-change digital-zoning-plans spatial-planning land-use-simulations land-use-transformations

format: SERVICE

en: Legend simulated maps

en:
Table of Content: 1. General context of the data set "LUSzoning”; 2. Background and aims of the study using the data set LUSzoning; 3. The data set LUSzoning.
1. General context of the data set "LUSzoning".
The data set "LUSzoning" stands for Land-use simulations integrating zoning regulations in Spanish functional urban areas. The data set has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2021. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, digital zoning plans) into quantitative land-change modelling approaches at the urban regional level.
2.	Background and aims of the study using the data set “LUSzoning”.
As part of the CONCUR project, a specific task was to integrate planning spatial policies in land-change modelling. Planning can be implemented in modelling using either hard or gradual restrictions. Different studies have addressed the inclusion of spatial planning policies in land-use change modelling. However, the integration of zoning constraints is generally established as hard or Boolean-based restrictions (e.g., whether urban development is allowed or not), while not accounting for the spatial heterogeneity or gradual characteristics within planning zones (e.g., whether planning regulations allow low, medium or high urban density), though these could improve real patterns simulations in urban areas. We assume Spanish General Zoning plans were suitable to explore the integration of planning into land-change modelling as soft constrains because they define land-use intensities in the buildable zoning areas. In light of the above considerations, the overall aim of the study was to model urban land-use changes using a multi-scenario approach that integrates digitized zoning plans for the Functional Urban Areas (FUAs) of Madrid, Barcelona, Valencia, and Zaragoza. The following specific objectives were addressed: i) to analyse the role of planning by defining three future scenarios that integrate digitized zoning plans and one scenario that assumes almost no planning intervention; ii) to introduce zoning constraints that reflect different degrees of urban densities; iii) to generate a transferable spatially-explicit modelling framework to integrate planning into land-use change simulations.
Four future land-use demands scenarios were defined for the FUAs. Storylines were created considering probable development scenarios related to zoning plans, current Spanish legislation and sustainability goals defined along two axes: a high market-oriented vs. high planning-intervention axis, and an axis of short-term economic growth vs. long-term sustainable growth. The sustainable development scenario (S1) is characterized by low gross floor area (GFA) growth that is limited to areas that are currently under development according to zoning plans. The business-as-usual scenario (S2) is characterized by medium GFA growth in the range of on-going trends. The strong development scenario (S3) is characterized by high GFA growth rates. Growth is restricted to buildable areas without urbanization project designated in zoning plans. The unrestricted development scenario (S4) prioritizes a high degree of market liberalization characterized by high GFA growth that surpasses population demands. S4 follows a rapid economic growth pattern with almost no planning intervention.
3.	 The data set “LUSzoning”.
The dataset includes 16 .asc raster layers providing the simulated land-uses under four defined scenarios for Barcelona, Madrid, Valencia and Zaragoza Functional Urban Areas (FUAs) for 2030. The simulated raster layers were created using CLUMondo simulation framework and have a spatial resolution of 30m. The .asc layers name include the name of the FUA and scenario number. For example, the output from simulating the urban growth for the city of Zaragoza under Scenario 2 is named “Zaragoza_S2.tif”. Furthermore, a .txt file named “Legend.txt” includes the numeric value of the land-use and the category of land-use that represents to interpret the .asc raster layers. The name of the land-use classes is a reclassification of the Urban Atlas 2012 land-use classes within the four Spanish FUAs analyzed.

digital-zoning-plans

display_name: digital-zoning-plans

land-use-change

display_name: land-use-change

land-use-simulations

display_name: land-use-simulations

land-use-transformations

display_name: land-use-transformations

spatial-planning

display_name: spatial-planning

en: LUSzoning: Land-use simulations integrating zoning regulations in Spanish functional urban areas


en: terrestiral-laserscanning antarctica terrestrial-laser-scans gridded-data depth-of-snowfall

en: Scan from 27 December 2018, 1 mm resolution

en: Scan from 21 December 2018, 1 mm resolution

en: Scan from 4 January 2019, 1 mm resolution

en: Scan from 2 January 2019, 1 mm resolution

en: Scan from 11 January 2019, 10 cm resolution, version 2

en: Scan from 21 December 2018, 10 cm resolution

en: Scan from 4 January 2019, 10 cm resolution

en: Scan from 27 December 2018, 10 cm resolution

en: Deprecated: Scan from 11 January 2019, 10 cm resolution, version 1

en: This resource is deprecated. It contains erroneous data.

en: Scan from 2 January 2019, 10 cm resolution

en: Scan from 11 January 2019, 1 mm resolution

en:
Surface topography maps (spatial extent: 400 m x 400 m) obtained at approximately 300 m from the top of the Hammarryggen Ice Rise in Dronning Maud Land, East Antarctica, using a Riegl VZ-6000 Terrestrial Laser Scanner (TLS). Scans were obtained on 5 days in the 2018-2019 Austral summer: on December 21 and 27, and January 2, 4 and 11. By using reflectors installed on bamboo poles, scans were registered with respect to the reflectors, such that the difference between two successive scans reveals the spatial patterns of erosion and deposition of snow. On each scan day, we used multiple scan positions to create one combined point cloud. After applying an octree filter on the point cloud, a 3D surface was obtained. For each day, the dataset contains a 1 mm and a 10 cm octree filter resolution file, only including points in a 400 m x 400 m area centered around the scan positions.

Notes:

* All files in the dataset are in the same coordinate system. However, this coordinate system is arbitrary (i.e., not related to any global coordinate system).

* From the installed reflectors, 4 reflectors could be used over the full period. The scan accuracy is generally higher within the area enclosed by the reflectors.

* The scans from January 2 were found to have exhibited small tilt during the scan and are of lesser accuracy.

* By walking along fixed corridors, disturbance of the snow was limited.

antarctica

display_name: antarctica

depth-of-snowfall

display_name: depth-of-snowfall

gridded-data

display_name: gridded-data

terrestiral-laserscanning

display_name: terrestiral-laserscanning

terrestrial-laser-scans

display_name: terrestrial-laser-scans

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Terrestrial laser scans on Hammarryggen Ice Rise, Dronning Maud Land, East Antarctica


maintainer: Ueli Reber

en: switzerland biodiversity environmental--policy text-corpus bgb policy-documents policy-analysis

en: Replication files

en:
 Introduction

The ZIP file contains all data and code to replicate the analyses reported in the following paper.

Reber, U., Fischer, M., Ingold, K., Kienast, F., Hersperger, A. M., Grütter, R., & Benz, R. (2022). Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics. *Policy Sciences*. [https://doi.org/10.1007/s11077-022-09456-4](https://doi.org/10.1007/s11077-022-09456-4)

If you use any of the material included in this repository, please refer to the paper. If you use (parts of) the text corpus, please also refer to the sources used for its compilation listed below. The content of the texts may not be changed.

 Data folder

The data folder contains the following files.

* _corpus.parquet_: Text corpus of Swiss policy documents
* _dict_de.csv_: Biodiversity dictionary (German)
* _dict_fr.csv_: Biodiversity dictionary (French)
* _dict_it.csv_: Biodiversity dictionary (Italian)
* _topic_labels.csv_: labels/codes for policy sectors
* _topics.csv_: labels/codes for policy sectors

The corpus and the dictionary were compiled by the authors specifically for this project. The labels/codes for policy sectors are based on the [coding scheme](http://ws-old.parlament.ch/affairs/topics) of the Swiss Parliament.

 Text corpus

The text corpus consists of 439,984 Swiss policy documents in German, French, and Italian from 1999 to 2018. The corpus was compiled from the following source between 2020-10-01 and 2021-01-31.

* Transcripts and parliamentary businesses (e.g. questions, motions, parliamentary initiatives) via the [Web Services (WS)](https://www.parlament.ch/de/%C3%BCber-das-parlament/fakten-und-zahlen/open-data-web-services) provided by the Swiss Parliament
* The official compilation of federal legislation ("Amtliche Sammlung", AS) via [opendata.swiss](https://opendata.swiss/de/dataset/official-compilation-of-federal-legislation-bs-as-1947-2018) provided by the Swiss Federal Archives (SFA)
* The federal gazette ("Bundesblatt") via [fedlex.admin.ch](https://www.fedlex.admin.ch/de/fga/index)
* Decisions of federal courts via [entscheidsuche.ch (ES)](https://entscheidsuche.ch/)

The corpus is stored in a single data frame to use with R saved as [PARQUET](https://parquet.apache.org/) file (corpus.parquet). The data frame has the following structure.

* _text_id_: Unique identifier for each text (source information as prefix, e.g. "t_")
* _doc_type_: Document type (see coding scheme below)
* _branch_: Government branche (1 legislative, 2 executive, 3 judicative)
* _stage_: Stage of policy process (1 drafting, 2 introduction, 3 interpretation)
* _year_: Year of publication
* _topic_: Policy sector (coding scheme in separate file in data folder)
* _lang_: Language (de, fr, it)
* _text_: Text

The following list contains the coding scheme for the doc_type variable.

* 101: Federal gazette // Draft for public consultation ("Vernehmlassungsverfahren")
* 102: Federal gazette // Explanation of draft for parliament ("Botschaft")
* 103: Federal gazette // Strategy, action plan
* 104: Federal gazette // Federal council decree ("Bundesratsbeschluss")
* 105: Federal gazette // (Simple) Federal decree ("(Einfacher) Bundesbeschluss")
* 106: Federal gazette // General decree ("Allgemeinverfügung")
* 107: Federal gazette // Treaty ("Übereinkommen")
* 108: Federal gazette // Treaty ("Abkommen")
* 109: Federal gazette // Draft for parliament ("Entwurf")
* 110: Federal gazette // Report ("Bericht")
* 111: Federal gazette // Report of parliamentary comission ("Bericht")
* 112: Federal gazette // Report of federal council ("Bericht")
* 201: Parl. businesses // Submitted text
* 202: Parl. businesses // Reason text
* 203: Parl. businesses // Federal council response
* 204: Parl. businesses // Initial situation
* 205: Parl. businesses // Proceedings
* 301: Parl. transcripts // Speech of MP
* 302: Parl. transcripts // Speech of federal council
* 401: Federal legislation // Legal text of the official compilation (law, ordinances, etc.)
* 501: Court decisions // Federal Supreme Court
* 502: Court decisions // Federal Criminal Court
* 503: Court decisions // Federal Administrative Court

 Code folder

The code folder contains all R code for the analyses. The files are numbered chronologically.

* _1_classifier_training.R_: Training of classifiers for classification of policy sectors
* _2_classifier_application.R_: Classification of documents in corpus
* _3_dictionary_application.R_: Biodiversity indexing of documents in corpus
* _4_stm_truncation.R_: Truncation of indexed documents to keep only relevant parts
* _5_stm_translation.R_: Translation of FR and IT documents to DE
* _6_stm_model.R_: Preprocesssing and structural topic model
* _7_plots.R_: Plots and numbers as included in the paper

The code/functions folder contains custom functions used in the scripts, e.g. to support topic model interpretation.

Package versions and setup details are noted in the code files.

 Contact

Please direct any questions to Ueli Reber (ueli.reber@eawag.ch).

bgb

display_name: bgb

biodiversity

display_name: biodiversity

environmental--policy

display_name: environmental--policy

policy-analysis

display_name: policy-analysis

policy-documents

display_name: policy-documents

switzerland

display_name: switzerland

text-corpus

display_name: text-corpus

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Replication files for "Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics"


tree-ring-laser-ablation-data

maintainer: Paula Ballikaya

title_for_slug: tree-ring-laser-ablation-data

en: dendrochemistry dendrochronology air-pollution laser-ablation tree-rings

en: Laser ablation data

en:
This dataset contains the values of several chemical elements (Mg, Al, Si, S, K, Ca, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Sr, Tl, Pb, Bi) measured in the latewood of tree rings of Mongolian oak from Harbin, China, at a 5-year resolution. Due to the lack of a suitable reference material for wood, absolute concentration was not calculated, and the ratio between the chemical element and 13C was taken as proxy for the element signal.

In Harbin, one of the largest cities and most important industrial centers in northeastern China, air quality monitoring systems were built only by the end of 2015 to meet the national requirements. Thus, dendrochemical analyses could be used as a tool to complement for the lack of air quality data over longer periods of time, allowing for the reconstruction of the temporal trend of trace metals. Our main scopes were to: (a) assess the chemical composition of Quercus mongolica Fisch. ex Ledeb. tree rings from Harbin using a recently developed system of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), (b) identify the main chemical elements which
derived from air pollution and may be used as indicators over the period 1965–2020 in Harbin, while excluding those that were controlled by physiological processes in the tree, and (c) reconstruct the history of pollution in Harbin by comparing the tree-ring chemical composition of recent decades with that of previous decades, in trees growing in the highly polluted city of Harbin and in trees growing in a control site 90 km away from major pollution sources.

Briefly, the temporal trend of some elements was influenced by physiological factors, by environmental factors such as pollution, or influenced by both. Mg, K, Zn, Cu, Ni, Pb, As, Sr and Tl showed changes in pollution levels over time.

air-pollution

display_name: air-pollution

dendrochemistry

display_name: dendrochemistry

dendrochronology

display_name: dendrochronology

laser-ablation

display_name: laser-ablation

tree-rings

display_name: tree-rings

en: Tree-ring laser ablation data


maintainer: Athanasios Nenes

en: cloud-modeling raclets wolfgangpass sigma-w supersaturation cloud-droplets

en: Predicted cloud droplet numbers (kappa=0.1) Davos Wolfgang

media_type: text/csv

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Davos Wolfgang station between February 24 and March 8 2019. For this, as a sensitivity test, a hygroscopicity parameter of 0.1 is assumed, which is the lower limit determined from the analysis carried out for Weissfluhjoch (https://www.envidat.ch/dataset/ccn-hygroscopicity-predicted-cloud-droplet-numbers-weissfluhjoch). The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

format: CSV

mimetype: text/csv

en: Predicted cloud droplet numbers (kappa=0.25) Weissfluhjoch

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Davos Wolfgang station between February 24 and March 8 2019. For this, as a sensitivity test, a hygroscopicity parameter of 0.25 is assumed, which is the upper limit determined from the analysis carried out for Weissfluhjoch (https://www.envidat.ch/dataset/ccn-hygroscopicity-predicted-cloud-droplet-numbers-weissfluhjoch). The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Cloud droplet properties were predicted between February 24 and March 8 2019 for the measurement site Davos Wolfgang (1630 m a.s.l., LON: 9.853594, LAT: 46.835577). Droplet calculations are carried out with the physically based aerosol activation parameterization of Morales and Nenes (2014), employing the “characteristic velocity” approach of Morales and Nenes (2010). Aerosol size distribution observations required to predict the cloud droplet numbers and maximum in-cloud supersaturation are obtained from a Scanning Mobility Particle Size Spectrometer (SMPS) instrument deployed at Davos Wolfgang (https://www.envidat.ch/dataset/aerosol-data-davos-wolfgang). The required vertical velocity measurements are derived from the wind Doppler Lidar (https://www.envidat.ch/dataset/lidar-wind-profiler-data) deployed at the same station and are extracted from the first bin of the instrument, being 200 m above ground level. The hygroscopic properties of the particles measured at Davos Wolfgang could not be estimated, owing to a lack of concurrent CCN measurements. As a sensitivity test, droplet calculations are performed assuming two different values of the aerosol hygroscopicity parameter, 0.1 and 0.25, based on the analysis carried out for Weissfluhjoch. Additional information can be found in Section 2.3 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

cloud-droplets

display_name: cloud-droplets

cloud-modeling

display_name: cloud-modeling

raclets

display_name: raclets

sigma-w

display_name: sigma-w

supersaturation

display_name: supersaturation

wolfgangpass

display_name: wolfgangpass

en: Predicted cloud droplet numbers Davos Wolfgang


maintainer: Frank Techel

en: rutschblock-test switzerland norway extended-column-test avalanche-observations avalanche-danger

en: ECT data (Norway, Switzerland)

en: Rutschblock data (Switzerland)

en: avalanche occurrence data (Norway, Sitzerland) - avalanche sizes per day and warning region

en: avalanche occurrence data (Norway, Sitzerland) - largest avalanche size per day and warning region

en:
Observational data used to quantitatively describe the key elements describing avalanche danger: snowpack stability, the frequency distribution of snowpack stability, and avalanche size.
The data set consists of
- Rutschblock test results (Switzerland)
- Extended Column Test results (Switzerland, Norway)
- Avalanche occurrence data (Switzerland, Norway).
The data were extracted from the respective operational databases of the national avalanche warning services in Switzerland (WSL Institute for Snow and Avalanche Research SLF Davos, Switzerland) and Norway (The Norwegian Water Resources and Energy Directorate NVE).
For further information regarding the data, please refer to the publication or contact the author.

avalanche-danger

display_name: avalanche-danger

avalanche-observations

display_name: avalanche-observations

extended-column-test

display_name: extended-column-test

norway

display_name: norway

rutschblock-test

display_name: rutschblock-test

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Stability tests, avalanche observations, Switzerland, Norway


en: snow-water-equivalent gcos snow-height snow-profile snow

en: DATA ACCESS

en: STATION METADATA

en: Snowprofile from 11 observer sites in Switzerland compiled for the Global Climate Observing System (GCOS). Height of snow (cm) and snow water equivalent (mm) are recorded every 2 weeks since the 1947 (depending on station). Attached metadata file gives details of each station.

gcos

display_name: gcos

snow

display_name: snow

snow-height

display_name: snow-height

snow-profile

display_name: snow-profile

snow-water-equivalent

display_name: snow-water-equivalent

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: GCOS SWE data from 11 stations in Switzerland


en: wms-data qgis-plugin swiss-geodata cable-yarding seilaplan digital-planning digital-elevation-model geoinformation-system open-source

en: WMS-Layer als Hintergrundkarten laden

en: View video on youtube!

en:
In order to digitally plan a cable line using the QGIS plugin ‘Seilaplan’, maps with various background information are helpful. In this tutorial we show you how to obtain maps that are helpful for cable line planning, for example a national map of Switzerland at different scales, the NFI vegetation height model or the NFI forest mix rate. For this we explain what WMS datasets are and how to integrate them into QGIS. No download of large data is needed for this, only a good internet connection. Please note that the tutorial language is German!

Link for the integration of WMS data: https://wms.geo.admin.ch/

Link to the description on the Swisstopo website:
https://www.geo.admin.ch/en/geo-services/geo-services/portrayal-services-web-mapping/web-map-services-wms.html

Link to the Seilaplan website: https://seilaplan.wsl.ch

**************************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung sind verschiedene Hintergrundkarten hilfreich. In diesem Tutorialvideo zeigen wir, was WMS Daten sind und wie man diese in QGIS einbinden kann. Dafür müssen die Daten nicht heruntergeladen werden. Es braucht lediglich eine gute Internetverbindung. Für die Seillinienplanung hilfreiche Karten sind bspw. die Landeskarte der Schweiz in verschiedenen Massstäben, das Vegetationshöhenmodell LFI oder der Waldmischungsgrad LFI.

Link zur Einbindung der WMS Daten: https://wms.geo.admin.ch/

Link zur Beschreibung auf der Swisstopo Webseite: https://www.geo.admin.ch/de/geo-dienstleistungen/geodienste/darstellungsdienste-webmapping-webgis-anwendungen/web-map-services-wms.html

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

wms-data

display_name: wms-data

en: Seilaplan Tutorial: Load WMS layers as background maps


maintainer: Benjamin Reuter

en: snowpack avalanche-activity avalanche-danger avalanche-problem-type snow crocus snow-instability avalanche snow-cover-modeling weissfluhjoch

en: 2015-2016 Seismic avalanche acitivity catalogue

en:
Avalanches were indentified in seismic data recorded by two seismic arrays, one deployed at Wannengrat (2,500 m) and another one deployed in the Dischma valley (2,000 m).
The data cover the period from 01.01.2016 - 30.04.2016 and are presented in Figure 7 in Reuter et al. (2021).

en: 2015-2016 Avalanche problem types from Crocus

en:
Avalanche problem types were derived from a snow cover simulation with the model Crocus for the winter season 2015-2016 at the Weissfluhjoch study plot, Davos, CH.
The data cover the period 01.01.2016-30.04.2016. The binary indicator (0,1) tells whether an avalanche problem type was identified in the snow cover simulation (1) or not (0).
The data are presented in Figure 7 in Reuter et al. (2021).

en: 1999-2017 Avalanche problem types from SNOWPACK

en:
Avalanche problem types were derived from snow cover simulations with the model SNOWPACK at the Weissfluhjoch study plot, Davos, CH.
The data cover the winter seasons between 1999-2017 and include the simulated annual frequencies of new snow, wind slab, persistent weak layer, aging-persistent weak layer and wet snow problem types.
The data are shown in Figure 8 in Reuter et al. (2021).

en: 1999-2017 Avalanche problem types from Crocus

en:
Avalanche problem types were derived from snow cover simulations with the model Crocus at the Weissfluhjoch study plot, Davos, CH.
The data cover the winter seasons between 1999-2017 and include the simulated annual frequencies of new snow, wind slab, persistent weak layer, aging-persistent weak layer and wet snow problem types.
The data are presented in Figure 8 in Reuter et al. (2021).

en: 2015-2016 Avalanche problem types from SNOWPACK

en:
Avalanche problem types were derived from a snow cover simulation with the model SNOWAPCK for the winter season 2015-2016 at the Weissfluhjoch study plot, Davos, CH.
The data cover the period 01.01.2016-30.04.2016. The binary indicator (0,1) tells whether an avalanche problem type was identified in the snow cover simulation (1) or not (0).
The data are presented in Figure 7 in Reuter et al. (2021).

en:
Avalanche problem types were derived from snow cover simulations with the models Crocus and SNOWPACK at the Weissfluhjoch study plot, Davos, CH. The data include annual frequencies of avalanche problem types for the seasons 1999-2017 and daily presence of avalanche problem types for the period 01.01.2016 - 30.04.2016.
Avalanche activity was derived from two seismic sensor arrays deployed no further than 15 km from Weissfluhjoch, Davos, CH. The data cover the period 01.01.2016 - 30.04.2016.

avalanche

display_name: avalanche

avalanche-activity

display_name: avalanche-activity

avalanche-danger

display_name: avalanche-danger

avalanche-problem-type

display_name: avalanche-problem-type

crocus

display_name: crocus

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

snowpack

display_name: snowpack

weissfluhjoch

display_name: weissfluhjoch

en: Simulated avalanche problem types and seismic avalanche activity around Weissfluhjoch


lidar-davos-wolfgang

maintainer: Patric Seifert

title_for_slug: lidar-davos-wolfgang

en: lidar tropos clouds polly raclets

en: Raman Lidar Davos

en: A portable Raman lidar system (Polly) from Leibnitz Institute for Tropospheric Research (Tropos) was deployed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Please use this [link](http://polly.tropos.de/?p=lidarzeit&Ort=39), to be directly forwarded to the Davos location and select the date of interest from the calendar (bold numbers). The data can be requested directly at the Polly team.

clouds

display_name: clouds

lidar

display_name: lidar

polly

display_name: polly

raclets

display_name: raclets

tropos

display_name: tropos

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: LIDAR Davos Wolfgang


causal-effect-of-lup

title_for_slug: causal-effect-of-lup

en: land-use-planning annual-effect land-use-change psm-did plan-evaluation

en: causal-effect-of-lup

en:
Data.dbf contains the varibles of 1662 villages in Zhangzhou Cities
PSM_DID.R can re-produce the results

en:
Title: Does zoning contain built-up land expansion? Causal evidence from Zhangzhou City, China.

Research objective: Built-up land zoning is an imporatant policy measure of land use planning (LUP) to contain built-up land expansion in China. We used a difference-indifference model with propensity score matching to estimate the average and annual effect of built-up land zoning on built-up land expansion in Zhangzhou City, China between 2010 and 2020.

Data: Data.dbf contains the varibles of 1662 villages in Zhangzhou Cities in 1995, 2000, 2005, 2010, 2013, 2015, 2018, and 2020.
XZQDM2 is villages' unique administrative ID;
Area is the land area of village i;
Dis2water is the Euclidean distance from village i to the nearest waterbody;
Dis2coastl is the Euclidean distance from village i to the nearest coastline;
Dis2city is the the Euclidean distance from village i to the city center;
Dis2county is the the Euclidean distance from village i to the nearest county center;
Elevation is the the average elevation within village i;
Dis2road is the the Euclidean distance from village i to the nearest road;
Nei_Built_ is the the area of built-up land (Nei Built.upit) in the neighboring villages of village i in year t;
Treated is a binary variable, Treated = 1 to the villages that were partially or entirely located inside the development-permitted zones, and Treated = 0 to the villages that were entirely located outside the development-permitted zones;
Intensity is the percentage of land that was assigned to the development-permitted zones in village i;
Year represent the year in 1995, 2000, 2005, 2010, 2013, 2015, 2018, and 2020;
BuLE is the dependent variable, representing built-up land expansion in village i in year t;
Town is town' unique administrative ID.

Method: First, we employed propensity score matching to overcome the selection bias and satisfy the parallel trend
assumption. Second, we built four Difference-in-Difference models to estimate the average and annual effect.

annual-effect

display_name: annual-effect

land-use-change

display_name: land-use-change

land-use-planning

display_name: land-use-planning

plan-evaluation

display_name: plan-evaluation

psm-did

display_name: psm-did

en: Causal effect of LUP


en: orography precipitation paleo-climate glaciers air-temperature last-glacial-maximum

en: Technical documentation

en: Technical documentation containing file metadata and variable descriptions.

media_type: application/pdf

format: PDF

mimetype: application/pdf

en: Data Access via S3

en:
High resolution, downscaled climate model data are used in a wide variety of applications in environmental sciences. Here we present the CHELSA-TraCE21k downscaling algorithm to create global monthly climatologies for temperature and precipitation at 30 arcsec spatial resolution in 100 year time steps for the last 21,000 years. Paleo orography at high spatial resolution and at each timestep is created by combining high resolution information on glacial cover from current and Last Glacial Maximum (LGM) glacier databases with the interpolation of a dynamic ice sheet model (ICE6G) and a coupling to mean annual temperatures from CCSM3-TraCE21k. Based on the reconstructed paleo orography, mean annual temperature and precipitation was downscaled using the CHELSA V1.2 algorithm.

The data is published under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

format: GeoTIFF

air-temperature

display_name: air-temperature

glaciers

display_name: glaciers

last-glacial-maximum

display_name: last-glacial-maximum

orography

display_name: orography

paleo-climate

display_name: paleo-climate

precipitation

display_name: precipitation

en: CHELSA-TraCE21k: Downscaled transient temperature and precipitation data since the last glacial maximum


en: specific-surface-area snow icecube microct intercomparison

en: Influence of black carbon on the measurement of the specific surface of snow with the near infrared method - Philipp Baumann

en: These experiments investigate different possible errors by measuring the specific surface area (SSA) of snow with the near infrared method. The influence of black carbon on this measurement was disproved, the theory was therefore validated. It shows that sunlight has no influence on the measurement with the IceCube. Wind drift snow as thin layer on the sample can increase the measured value of the specific surface by a few percent. This could be part of the error, observed in former measurements at SLF. As reference for the measured SSA values with the near infrared method, computer tomography was used to verify the SSA values.

en: Grain survey of snow particles

en: The file contains all measurements of the artificial particles for snow types A, B, C, D and E, including the artificial particle mass in the Petri dish.

format: XLS

en: artificial_snow_data set

en: The file contains all micro-CT and IC measurements of the artificial snow data set. The data set was originally produced to investigate the influence of black carbon on SSA measurements.

en: IceCube and MicroCT data

en: The file contains all micro-CT and IC measurements for snow types A, B, C, D and E used in our study. All samples were processed (and stored) in a cold laboratory at -15°C.

en: SMP measurement files for snow types A, B, C and D.

en: TARTES simulations

en: Jupyter notebook with TARTES simulations.

en: Statistics of samples

en: The file contains all data for the plot in figure 1 of the co-located density and SSA measurement at Summit, Greenland in May 2015, conducted by Schneebeli, Proksch, Schmid.

en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

snow

display_name: snow

specific-surface-area

display_name: specific-surface-area


en: review biogas switzerland bioenergy manure

en: Production de biogaz à partir d’engrais de ferme en Suisse

en: L'objectif de ce livre blanc est de fournir aux décideurs, aux administrations et aux parties prenantes les résultats de recherche les plus récents afin de promouvoir l'utilisation optimale de la bioénergie issue des engrais de ferme dans la transition énergétique suisse. A cette fin, les résultats du centre de compétence suisse pour la recherche en bioénergie - SCCER BIOSWEET - sont résumés et présentés dans un contexte plus large. Si rien d'autre n'est mentionné, les résultats se réfèrent à la Suisse et, dans le cas de la matière première, aux potentiels nationaux de biomasse.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: occupancy-models wetlands landscape amphibians conservation

en: Model code

en: This R markdown file contains all code and descriptions necessary to load and format the provided data and to fit the dynamic occupancy models described in the associated publication, including JAGS code for the fitted models.

en: Observation data

en: This file contains detection/non-detection data for the 12 amphibian species between 1999 and 2019 for 3 annual visits. Detectable denotes whether or not a visit j was made to pond i in year t. ObservedID gives a unique ID for the observer collecting the data during visit j to pond i in year t.

en: Model code, description

media_type: text/html

en: This is the output of the R markdown file that provides JAGS model code and describes how to format the provided data and fit the dynamic occupancy models described in the associated publication, for a quick overview.

format: HTML

en: Covariate data 2

en: This file contains covariate data that changes over time for 856 ponds in 21 years (long format): whether or not a pond exists in year _t_, the age of constructed ponds in year _t_, structural connectivity of the pond in year _t_.

en: Original raw data

en: This file contains the original raw monitoring data as provided by the canton of Aargau. Access is restricted and only considered upon request and in consultation with the canton of Aargau.

en: Readme

en: Description of methods and datasets.

en: Covariate data 1

en: This file contains covariate data that does not change over time for 856 ponds: the region the pond is in, whether the pond is old or new (constructed since 1991), elevation, water surface area, fluctuations of the water table (yes, no), the percent forest cover in 100m radius around the pond, the area or large (>6m wide) roads in 1km radius around the pond.

en:
In the canton of Aargau, hundreds of new ponds have been constructed since the 1990s to benefit declining amphibian populations. This dataset consists of monitoring data for all 12 pond-breeding amphibian species in the canton of Aargau from 1999 to 2019 in 856 ponds, and environmental variables that describe the ponds and the landscape surrounding the ponds. Species observation data is detection/non-detection data from repeat visits during survey years, during which all potentially suitable ponds in an area were surveyed. Environmental variables describing the ponds are whether the pond has been newly constructed since 1991 or not, pond age (if constructed), elevation a.s.l., the water surface area, and whether the water table fluctuates or not. Environmental variables describing the surroundings of the ponds are the percent area of forest within a circular buffer of radius 100m around the pond, the area of large (width ≥6m) roads within a circular buffer of radius 1km around the pond, and structural connectivity.

The canton of Aargau is the owner of the monitoring data; the original datafile is only disclosed upon request and in consultation with the canton of Aargau.

The edited dataset contains cleaned observation data for the 12 amphibian species, as well as compiled and edited covariate data and code to fit dynamic occupancy models.

amphibians

display_name: amphibians

conservation

display_name: conservation

landscape

display_name: landscape

occupancy-models

display_name: occupancy-models

wetlands

display_name: wetlands

en: Amphibian observation and pond data (Aargau, Switzerland)


en: landscape-evolution flora endemism madagascar geology

en: Data v1.o

en: used for paper submission only

en: Escarpment evolution drives the diversification of the Madagascar flora

en: This upload contains the data (species checklist, species range maps, time-calibrated phylogenies, topographic change, etc.) generated, analyzed, and presented in the paper .

en: Although much of the endemic biodiversity of Madagascar can be attributed to its isolation as an island in the Indian Ocean, the high rates of speciation throughout its geologic history suggest an influence of local-scale landscape dynamics. The topographic evolution of Madagascar is dominated by the formation of high-relief continental rift escarpment and we argue that the erosion and landward retreat of this topography creates habitat heterogeneity that has served as a speciation pump for the island. The highest plant richness is found along the escarpment and is characterized by steady diversification rates over the last 45 Ma. Modeled landscape evolution by escarpment retreat demonstrates opportunities for allopatric speciation by transient habitat fragmentation through multiple mechanisms, including catchment expansion, isolation of highland remnants and formation of topographic and river barriers The segregation of floral phylogenetic turnover parallel to the escarpment is consistent with these mechanisms and indicates the importance of erosion-driven landscape dynamics on speciation.

endemism

display_name: endemism

flora

display_name: flora

geology

display_name: geology

landscape-evolution

display_name: landscape-evolution

madagascar

display_name: madagascar

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Zhao

en: driving-factors planning urban-land-use austin land-dynamics

en: Potential driving factors of urban transformations of Austin over 25 years

en: In this study, the Austin metropolitan area, Texas, U.S., one of the fastest urban transformations and transformations regions, is selected to test the hypothesis that spatial planning and policies are important factors of urban transformations. Despite ample previous work in understanding the interactions between human and urban form transformation at specific areas, the actual interventions and outcomes of planning and policies (e.g., ‘smart growth’) on urban forms have been poorly measured. In this study, the potential influencing factors of urban transformations of Austin over 25 years were selected and collected.

austin

display_name: austin

driving-factors

display_name: driving-factors

land-dynamics

display_name: land-dynamics

planning

display_name: planning

urban-land-use

display_name: urban-land-use


maintainer: Lisa Hülsmann

en: tree-mortality inventory-data forest-reserves tree-growth empirical-mortality-models

en: Calibration data

en:
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.

 Meta data
Reserve: Name of the forest reserve

Plot: Permanent plot number

 Tree data
Species: Latin species name (or species group, cf. _Quercus_ spp.)

y: Status of the tree with 0 = alive and 1 = dead

dt: Length of the mortality period (years)

DBH: Diameter at breast height (mm) of the second inventory

relBAI: Annual relative basal area increment (-) calculated based on the first and the second DBH measurement as the compound annual growth rate of the trees basal area

 Stand data
_All stand variables were calculated for the second inventory._

mDBH: Mean diameter at breast height (mm)

iqrDBH: Interquartile range of diameter at breast height (mm)

BA: Basal area per hectare (m2 ha-1)

N: Number of trees per hectare (ha-1)

 Climate data
_Both climate variables were calculated for the period between the second and the third inventory._

P: Mean annual precipitation sum (mm)

mT: Mean annual air temperature (°C)

en:
The dataset comprises > 90 000 records from inventories in 54 strict forest reserves in [Switzerland](https://www.wsl.ch/de/wald/biodiversitaet-naturschutz-urwald/naturwaldreservate.html) and [Lower Saxony / Germany](http://naturwaelder.de/) along a considerable environmental gradient. It was used to develop parsimonious, species-specific mortality models for 18 European tree species based on tree size and growth as well as additional covariates on stand structure and climate.

 Inventory data
Measurements had been conducted repeatedly on up to 14 permanent plots per reserve for up to 60 years with re-measurement intervals of 4 - 27 years. The permanent plots vary in size between 0.03 and 3.47 ha. The inventories provide diameter measurements at breast height (DBH) and information on the species and status (alive or dead) of trees with DBH ≥ 4 cm for Switzerland and ≥ 7 cm for Germany.

 Data selection
We excluded three permanent plots where at least 80 % of the trees died during an interval of 10 years, and mortality could be clearly assigned to a disturbance agent. Mortality in the remaining stands was rather low, with a mean annual mortality rate of 1.5 % and strong variation between plots from 0 to 6.5 % (assessed for trees of all species with DBH ≥ 7 cm).
We only used data from permanent plots with at least 20 trees per species to obtain reliable plot-level mortality rates even for species with low mortality rates (about 5 % during 10 years), and selected tree species occurring on at least 10 plots to cover sufficient ecological gradients. This led to a dataset of 197 permanent plots and 18 tree or shrub species: _Abies alba_ Mill., _Acer campestre_ L., _Acer pseudoplatanus_ L., _Alnus incana_ Moench., _Betula pendula_ Roth, _Carpinus betulus_ L., _Cornus mas_ L., _Corylus avellana_ L., _Fagus sylvatica_ L., _Fraxinus excelsior_ L., _Picea abies_ (L.) Karst, _Pinus mugo_ Turra, _Pinus sylvestris_ L., _Quercus pubescens_ Willd., _Quercus_ spp. (_Q. petraea_ Liebl. and _Q. robur_ L.; not properly differentiated in the Swiss inventories), _Sorbus aria_ Crantz, _Tilia cordata_ Mill. and _Ulmus glabra_ Huds..

 Predictors of tree mortality
We considered tree size and growth as key indicators for mortality risk. Radial stem growth between the first and second inventory and DBH at the second inventory were used to predict tree status (alive or dead) at the third inventory. To this end, the annual relative basal area increment (relBAI) was calculated as the compound annual growth rate of the trees basal area. Additional covariates on stand structure and climate comprise mean annual precipitation sum (P), mean annual air temperature (mT), the mean and the interquartile range of DBH (mDBH, iqrDBH), basal area (BA) and the number of trees (N) per hectare.

 Further information
For further information, refer to Hülsmann _et al_. (in press) How to kill a tree – Empirical mortality models for eighteen species and their performance in a dynamic forest model. _Ecological Applications_.

empirical-mortality-models

display_name: empirical-mortality-models

forest-reserves

display_name: forest-reserves

inventory-data

display_name: inventory-data

tree-growth

display_name: tree-growth

tree-mortality

display_name: tree-mortality

en: Calibration data for empirical mortality models of 18 European tree species


maintainer: Anita C. Risch

en: weed-management native-plant herbivory grassland non-native-plant

en: Correction: Data file native and non-native plant interactions in Australian grasslands

en:
taxa tab:	list and overview of all the recorded species

* family:                 family of the plant

* genus:                genus of the plant

* species:                plant species name

* origin:                indicates whether the plant is native to Australia or not (non-native)

* common name:	        common name of the plant species

* functional group:	        functional group of the plant species: forb, graminoid, fern, tree

* functional group detailed:	gives more detail about the type of graminoid and forb: legume, forb (non-leguminous),
                        grass, sedge, rush, fern, tree

* lifeform:                annual or perennial lifeform (species which can have both of these lifeforms where
                        considered as annuals)

plot tab:	list of species found in each plot and their cover (%)

* sampling.session:        provides information about the sampling time:
                        May2020 = data that was collected in May 2020
                        Nov2020 = data that was collected in November 2020

* farm.name:	            name of the farms where the sampling took place:
                        SF = farm of the Southern group
                        NF = farm of the Northern group
                        numbers 1-3 = randomly allocated to the Southern group of farms
                        numbers 4-6 = randomly allocated to the Northern group of farms

* site.type:	                KG: Kangaroo grass dominated site
                        ALG: ALG+KG site (Kangarooo grass and African lovegrass co-dominated site)

* plot.no:                plot number: 9-12

* scientific.name:	        scientific name of the plant species found in a certain plot

* functional group:	        indicates whether the species found is a tree, forb, graminoid or fern

* functional group detailed:	indicates whether the species found is a tree, legume, forb (non-leguminous),
                        grass, sedge, rush, fern

* lifeform:                specifies the lifeform of the species: annual or perennial lifeform
                        (species which can have both of these lifeforms where considered as annuals)

corrections tab:	Detailed description of corrections made in plot.data tab

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Schlierenzauer, C., Risch, A.C., Schütz, M., Firn, J. 2021. Non-native Eragrostis curvula reduces plant species diversity in pastures of South-eastern Australia even when native Themeda triandra remains co-dominant. Plants 10, 596._

Please cite this paper together with the citation for the datafile.

Study area
The study was conducted in the lowland grassy woodlands of the Bega Valley Region, which is located in the south-east corner of New South Wales, Australia. Embedded between the Pacific Ocean and the Australian Alps, the lowland grassy woodlands are mostly located on granitic substrates and reach elevations of roughly 500 m above sea level. Typically, these grassy woodlands receive less precipitation (mean annual precipitation between 700-1100 mm) compared to the more elevated areas that surround them (NSW Government - Office of Environment and Heritage 2017).
The vegetation is dominated by an open tree canopy layer consisting of Eucalyptus tereticornis Sm, Angophora floribunda Sm. (Sweet) and a range of other eucalypt species. Sometimes shrub or small trees are also present, whereas grasses and forbs form the ground-cover. In areas without intensive agricultural history, this layer is dominated by perennial, tussock grasses such as Themeda triandra Forssk, Microlaena stipoides R.Br (Weeping Grass), Eragrostis leptostachya Steud. (Paddock Lovegrass) and Echinopogon ovatus P.Beauv (Forest Hedgehog Grass). The remaining inter-tussock spaces are occupied by a diversity of growth-restricted grasses and herbaceous forbs (NSW - Department of Planing, Industries and Environment 2019; NSW Government - Office of Environment and Heritage 2017).
Clearing, pasture sowing, fertilizer application and livestock grazing resulted in a dramatic decrease in the extent of these natural woodlands, with less than five percent within conservation reserves and overall, with only about 20% of their original extent in New South Wales still existing (Tozer et al. 2010). The remaining areas outside of reserves are threatened by altered fire frequencies, habitat clearing, livestock grazing and especially by non-native plant invasion, particularly Eragrostis curvula (Schrad.) Nees. For this reason, the grassy woodlands are listed as an endangered ecological community in the NSW state legislation. Additionally, they are considered as critically endangered by the Commonwealth of Australia (Threatened Species Scientific Committee (TSSC) 2013).

Experimental design and sampling
The study was conducted on six farms and in each of them two sites were chosen, representing a paired design. One of the sites at each farm is dominated by native Themeda triandra, the other one co-dominated by non-native Eragrostis curvula and Themeda triandra. All farms are within a radius of approximately 10 km from the town Candelo. Three of the farms are located North (36°40’ to 36°42’ S and 149°38’ to 149°42’ E) and three of them are located South (36°51’ to 36°49’ S and 149°38’ to 149°42’ E) of Candelo.
Non-native herbivores (mainly cattle, sheep and rabbits) and native herbivorous marsupials (mainly kangaroos, wallabies and wombats) are present in the area of these sites. On each site, data was collected within four plots (each 1 x 1 m) in May and November 2020. All plant species found within a plot were recorded and their relative abundance was estimated.

References
NSW - Department of Planing, Industries and Environment. 2019. “Lowland Grassy Woodland in the South East Corner Bioregion - Endangered Ecological Community Listing.” https://www.environment.nsw.gov.au/topics/animals-and-plants/threatened-species/nsw-threatened-species-scientific-committee/determinations/final-determinations/2004-2007/lowland-grassy-woodland-south-east-corner-bioregion-endangered-ecological-community-l (February 18, 2021).
NSW Government - Office of Environment and Heritage. 2017. “Lowland Grassy Woodland in the South East Corner Bioregion - Profile.” https://www.environment.nsw.gov.au/threatenedSpeciesApp/profile.aspx?id=20070 (January 31, 2021).
Threatened Species Scientific Committee (TSSC). 2013. Environment Protection and Biodiversity Conservation Act 1999 (EPBC Act) Conservation Advice for Lowland Grassy Woodland in the South East Corner Bioregion. http://www.environment.gov.au/biodiversity/threatened/communities/pubs/82-conservation-advice.pdf.
Tozer, Mark et al. 2010. “Native Vegetation of Southeast NSW: A Revised Classification and Map for the Coast and Eastern Tablelands.” Cunninghamia : a journal of plant ecology for eastern Australia 11(3): 359–406.

grassland

display_name: grassland

herbivory

display_name: herbivory

native-plant

display_name: native-plant

non-native-plant

display_name: non-native-plant

weed-management

display_name: weed-management

en: Native and no-native plant interactions in Australian grasslands


en: functional-taxonomic-groups biodiversity disturbance bryophyte functional-taxonomic-group endemic-species endemic madeira-island photobiont climate-change elevational-gradient lichen-growthform climate-change-impact lichen bryophyte-life-strategy lichen-growth-form moss liverwort

en: MadCrypto – Bryophyte and macrolichen diversity in laurel forests of Madeira

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science.

en:
This dataset includes species lists of bryophytes and macrolichens (presence/absence) sampled on the forest floor and on trees in disturbed and undisturbed plots along elevation gradients in the laurel forests of Madeira island. It also contains species specific information (bryophytes: red list status, endemic status, taxonomic group, life strategy; macrolichens: photobiont type, growth form) as well as plot information (Plot_ID, sampling date, coordinates, elevation a.s.l. (m), disturbance type, sampled host tree species).

The dataset was used for the paper
Boch S, Martins A, Ruas S, Fontinha S, Carvalho P, Reis F, Bergamini A, Sim-Sim M (2019) Bryophyte and macrolichen diversity show contrasting elevation relationships and are negatively affected by disturbances in laurel forests of Madeira island. Journal of Vegetation Science 30: 1122–1133.

The excel file contains 5 sheets:
1) Plot information
2) Bryophyte data with species specific information, separated per substrate
3) Macrolichen data with species specific information, separated per substrate
4) Bryophyte data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 2 and 4 might therefore differ slightly.
5) Macrolichen data with species specific information (plot level data). Species lists of the two substrates were merged; if one substrate in a plot hosted a species identified only to genus level (genus spec.) but the second investigated substrate hosted an identified species of the same genus, we removed the genus spec. entry in the particular plot. The species list of sheet 3 and 5 might therefore differ slightly.

biodiversity

display_name: biodiversity

bryophyte

display_name: bryophyte

bryophyte-life-strategy

display_name: bryophyte-life-strategy

climate-change

display_name: climate-change

climate-change-impact

display_name: climate-change-impact

disturbance

display_name: disturbance

elevational-gradient

display_name: elevational-gradient

endemic

display_name: endemic

endemic-species

display_name: endemic-species

functional-taxonomic-group

display_name: functional-taxonomic-group

functional-taxonomic-groups

display_name: functional-taxonomic-groups

lichen

display_name: lichen

lichen-growth-form

display_name: lichen-growth-form

lichen-growthform

display_name: lichen-growthform

liverwort

display_name: liverwort

madeira-island

display_name: madeira-island

moss

display_name: moss

photobiont

display_name: photobiont


wind-crust-formation-snowmicropen-data

title_for_slug: wind-crust-formation-snowmicropen-data

en: snowmicropen smp snow wind-packing wind-crust

en: SMP data

en: Links to the dataset

en: README

en: Describes the dataset in detail

en: Processing scripts

en: Contains the R-scripts used to process the SMPs

en:
This dataset contains the SnowMicroPen (SMP) data from 38 wind tunnel experiments on wind-packing / wind crust formation. These experiments were performed in the winters 2015/16 and 2016/17 and include more than 1000 SMP measurements.

The SMPs are organized per experiment. Each experiment subfolder contains the processed SMP profiles and some additional files.

Please refer to the README for more details on the data. The processing scripts are available for download as well. The scripts are mainly provided as documentation and would need to be adjusted to be used.

This dataset is the basis of the following publication:

Sommer C.G., Lehning M., & Fierz C. (2017). Wind tunnel experiments: Saltation is necessary for wind-packing. Journal of Glaciology, 63(242), 950-958. doi:10.1017/jog.2017.53

smp

display_name: smp

snow

display_name: snow

snowmicropen

display_name: snowmicropen

wind-crust

display_name: wind-crust

wind-packing

display_name: wind-packing

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Wind crust formation: SnowMicroPen data


maintainer: Martin Schneebeli

en: 3d-model new-snow weak-layer rounded-snow snow-cast snow 3d-print depth-hoar

en: Description of snowtypes, filenames and other metadata

en: This file contains information about the stl-files of the different snow models. Snowtype (Schneeart), International Snow Classification, preview picture, notes about the origin of the snow, filename of the stl-data, and physical size of the model are given.

en: Snow models in STL-format

en: The zipped file contains all data described in the file 3d_snow_models_metadata. The stl-files should be ready for additive manufacturing.

en: The dataset contains several snow models in the Standard Tesselated Geometry File Format (stl) for 3D visualization, printing and additive manufacturing. Different snow types are available (new snow, rounded snow, depth hoar, buried surface hoar, graupel).

depth-hoar

display_name: depth-hoar

new-snow

display_name: new-snow

rounded-snow

display_name: rounded-snow

snow-cast

display_name: snow-cast

weak-layer

display_name: weak-layer


maintainer: Elisabeth Hafner

en: avalanche satellite hazard-mapping natural-hazard snow

en: SPOT6 Avalanche Outlines 16 January 2019

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset and within the limitations of the dataset described in the publications.

format: SHP

en:
Outlines of 6'041 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 16 January 2019. The dataset was acquired following a period with very high avalanche danger. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping16012019.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

The data was comprehensivly validated in a subset area in

Hafner, E.D.; Techel, F.; Leinss, S.; Bühler, Y., 2021: Mapping avalanches with satellites - evaluation of performance and completeness. Cryosphere, 15, 2: 983-1004. doi: 10.5194/tc-15-983-2021

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

en: SPOT6 Avalanche outlines 16 January 2019


maintainer: Peter Bebi

en: stillberg vegetation carbon-dioxide soil-temperature experiment climate-change

en: Project Description FACE Stillberg

en: Link to FACE project description on the WSL website.

en: Metadata FACE Stillberg Data File Description

en: List of descriptions for each of the .csv FACE data files.

en: Metadata FACE Stillberg Experimental Design

en: Schematic illustration and tabular listing of the FACE experimental design.

en: Data FACE Stillberg

en: Folder in .zip format containing the FACE datasets.

en:
 Background information

High elevation ecosystems are important in research about environmental change because shifts in climate associated with anthropogenic greenhouse gas emissions are predicted to be more pronounced in these areas compared to most other regions of the world. This project involved a Free Air CO2 Enrichment (FACE) and soil warming experiment located in a natural treeline environment near Davos, Switzerland (Stillberg, 2200 m a.s.l.). Elevated atmospheric CO2 concentrations (+200 ppm) were applied from 2001 until 2009, and a soil warming treatment (+4 °C) was applied from 2007 until 2012. The combined CO2 enrichment and warming treatment reflects conditions expected to occur in this region in approximately 2050. A broad range of ecological and biogeochemical research was carried out as part of this environmental change project.

 Experimental design

The experiment consisted of 40 hexagonal 1.1 m² plots, 20 with a *Pinus mugo* ssp. *uncinata* (mountain pine, evergreen) individual in the centre and 20 with a *Larix decidua* (European larch, deciduous) individual in the centre. A dense cover of understorey vegetation surrounded the tree in each plot, including the dominant dwarf shrub species *Vaccinium myrtillus* (bilberry), *Vaccinium gaultherioides* (group *V. uliginosum agg.*, northern bilberry) and *Empetrum nigrum* ssp. *hermaphroditum* (crowberry) plus several herbaceous and non-vascular species.
At the beginning of the experimental period, the 40 plots were assigned to ten groups of four neighbouring plots (two larch and two pine trees per group) in order to facilitate the logistics of CO2 distribution and regulation. Half of these groups were randomly assigned to an elevated CO2 treatment, while the remaining groups served as controls and received no additional CO2. In spring 2007, one plot of each tree species identity was randomly selected from each of the 10 CO2 treatment groups and assigned a soil warming treatment, yielding a balanced design with a replication of five individual plots for each combination of CO2 level, warming treatment and tree species.

 Data description

Soil and air conditions have been monitored closely throughout the study period, with most measurements made during the combined CO2 x warming experiment (2007-2009). The data comprise of air temperature, soil temperature, soil moisture, sapflow, tree diameter and CO2 measurements.

carbon-dioxide

display_name: carbon-dioxide

climate-change

display_name: climate-change

experiment

display_name: experiment

soil-temperature

display_name: soil-temperature

stillberg

display_name: stillberg

vegetation

display_name: vegetation

en: FACE: Stillberg CO2 enrichment and soil warming study


maintainer: Océane Hames

en: arctic-sea-ice mosaic snow-deposition openfoam snow-transport

en: Paper Draft

en: This is the initial draft of the paper where the snowBedFoam 1.0. results are tested against Terrestrial Laser Scan (TLS) measurements of snow dynamics on Arctic sea ice (MOSAiC expedition). It highlights the numerical limitations of our model as well as the measurement uncertainties, which may occur in such extreme environments.

en: snowBedFoam 1.0.

en:
OpenFOAM-2.3.0. scripts containing the implemented Eulerian-Lagrangian snow transport model.

The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en: MOSAiC Met City preliminary (Level 2) wind data

en:
Extract from the preliminary MOSAiC atmospheric data (Level 2) for the time period 6th to 13th of November, 2019.
This data was used to set up the fluid forcing parameters in the snowBedFoam simulations on MOSAiC sea ice. It is being published in this repository with the kind permission from Matthew Shupe and his team.
The final processed and quality controlled version of this dataset (Level 3) has not been published yet. A complete reference will be added in this description once it is released.

en:
snowBedFoam 1.0. is a snow transport solver implemented in the Computational Fluid Dynamics (CFD) software OpenFOAM. It is adapted from the standard multi-phase flow solver DPMFoam for application in snow-influenced environments.

To simulate aeolian snow transport, snowBedFoam 1.0. handles coupled Eulerian–Lagrangian phases, which involve a finite number of particles (snow) spread in a continuous phase (air). The snow erosion and deposition are modelled through physically-based equations such as the ones employed in the well-established LES-Lagrangian Stochastic Model (Comola and Lehning, 2017 ; Sharma et al., 2018). This modelling approach is computationally intensive and thus adapted to simulate snow movement and distribution on small scale terrain.

snowBedFoam 1.0. was tested against topographical data collected on Arctic sea ice during the MOSAiC expedition (Clemens-Sewall, 2021) . Together with atmospheric data from the MOSAiC Met City (Shupe et al., 2021) used for the fluid forcing, the model was able to accurately simulate the zones of erosion and deposition of snow along a complex ice ridge structure.

The core code of snowBedFoam 1.0. is also accessible on the WSL/SLF GitLab repository (more details in the Resources section).

arctic-sea-ice

display_name: arctic-sea-ice

mosaic

display_name: mosaic

openfoam

display_name: openfoam

snow-deposition

display_name: snow-deposition

snow-transport

display_name: snow-transport

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: snowBedFoam: an OpenFOAM Eulerian-Lagrangian solver for modelling snow transport


disdrometer-data-davos-wolfgang

title_for_slug: disdrometer-data-davos-wolfgang

en: raclets davos disdrometer precipitation fall-velocity

en: Disdrometer Data Davos Wolfgang

en:
The zip folder contains one netCDF file per day for Davos Wolfgang from February 8 to March 19 2019 with a temporal resolution of 30 seconds (time in UTC) and includes:

- characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...)
- precipitation rate
- radar reflectivity
- visibility range
- weather codes
- instrument performance

en: The dataset contains information on precipitation amount and type for Davos Wolfgang (LON: 9.853594, LAT: 46.835577) from February 8 to March 19 2019. It includes: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

davos

display_name: davos

disdrometer

display_name: disdrometer

fall-velocity

display_name: fall-velocity

precipitation

display_name: precipitation

raclets

display_name: raclets


en: eemma emma mixing-models end-member-mixing-analysis stable-isotopes tracers

en: eemma vignette script

en: An R script for the vignettes (simple data analysis demonstrations) shown in the user's guide

mimetype: application/octet-stream

en: eemma user's guide

en: A brief user's guide to EEMMA, with illustrations using a simple data set

en: vignette data

en: A simple data set for the vignette script

en: An R script that performs ensemble end-member mixing analysis

en:
The R script eemma.R, which implements Ensemble End-Member Mixing Analysis (EEMMA) to estimate source fractions in mixtures, exploiting information contained in time-series correlations among tracer time series.

A brief user's guide, a demonstration script, and a demonstration data set are also provided, to accompany Kirchner, J.W., Mixing models with multiple, overlapping, or incomplete end-members, quantified using time series of a single tracer, Geophysical Research Letters, 2023.

The user's guide is available for public use under Creative Commons CC-BY-SA. Public use of the scripts is permitted under GNU General Public License 3 (GPL3); for details see https://www.gnu.org/licenses/

eemma

display_name: eemma

emma

display_name: emma

end-member-mixing-analysis

display_name: end-member-mixing-analysis

mixing-models

display_name: mixing-models

stable-isotopes

display_name: stable-isotopes

tracers

display_name: tracers

en: eemma.R, an R script for Ensemble End-Member Mixing Analysis


photogrammetric-drone-data-gruenbodeli

title_for_slug: photogrammetric-drone-data-gruenbodeli

en: uav wingtra snow-depth-mapping drone-data dsm orthophoto photogrammetry

en: Data Access

en:
- ortho (3 cm/25 mm resolution)
- DSM (10 cm resolution)
- HS (10 cm resolution)
- RGB images
- Agisoft Metashape Project Report

All products are also available as a cloud optimized geotiff.

en:
We conducted various drone flights at Grüenbödeli near Davos with the Sony RX1R II mounted on a Wingtra drone during 2020/21/22. The data was processed with the Agisoft Metashape Professional Software.
The following products are available for download:
- DSM 10cm resolution
- Orthomosaic 3cm/25mm resolution
- Snow Raster 10cm resolution
- original RGB images

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

snow-depth-mapping

display_name: snow-depth-mapping

uav

display_name: uav

wingtra

display_name: wingtra

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Photogrammetric Drone Data Grüenbödeli


maintainer: Mahdi Jafari

en: openfoam numerical-simulation convection-in-snow vapor-transport snow-density-profile

en: snowpackBuoyantPimpleFoam

en:
This zipped folder includes (1) the source code files, (2) an example case for simulation, and (3) an instruction how to compile and use the new solver.

Note that the most updated version of snowpackBuoyantPimpleFoam can be found in the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/snow-models/snowpackbuoyantpimplefoam

en: snowpackBuoyantPimpleFoam is a two-phase solver implemented to model convection of water vapor with phase change in snowpacks. This new solver is based on the standard solver of buoyantPimpleFoam in the open-source fluid dynamics software, OpenFOAM 5.0 (www.openfoam.org).

convection-in-snow

display_name: convection-in-snow

numerical-simulation

display_name: numerical-simulation

openfoam

display_name: openfoam

snow-density-profile

display_name: snow-density-profile

vapor-transport

display_name: vapor-transport

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: snowpackBuoyantPimpleFoam: an OpenFOAM Eulerian–Eulerian two-phase solver for modelling convection of water vapor in snowpacks


maintainer: Felix Neff

en: restoration functional-diversity topsoil-removal long-term-experiment diversity functional-traits insects grassland

en: Insect traits

en:
Functional traits of all herbivorous insect species sampled in the study.

- **Species**: Insect species name (following [Fauna Europaea](https://fauna-eu.org))
- **Author**: Author and year of species' description (following [Fauna Europaea](https://fauna-eu.org))
- **Group**: Insect group as used in the analyses
- **Body volume**: Body volume determined by body length, body width and body height (in mm$^3$)
- **Body_shape**: Ratio of body length to body width
- **Hind_femur_shape**: Ratio of hind-femur length to hind-femur width
- **Hind_front_leg_ratio**: Ratio of front-leg length to hind-leg length (leg length = femur length + tibia length)
- **Wing_length_rel**: Ratio of wing length to body length
- **Leg_length_rel**: Ratio of front-leg length to body length (leg length = femur length + tibia length)
- **Antenna_length_rel**: Ratio antenna length to body length
- **Eye_width_rel**: Ratio of eye width to head width (Auchenorrhyncha, Heteroptera) / to head height (Orthoptera)
- **Feeding_specialization**: Insect specialization on food source (*m*: monophagous, *o*: oligophagous, *p*: polyphagous)
- **Feeding_tissue**: Feeding tissue used for feeding (*c*: chewers, *x*: xylem, *p*: phloem, *m*: mesophyll, *m-p/r*: mesophyll as well as phloem and/or reproductive organs, *r*: reproductive organs, *se*: ripe seeds)
- **Hibernation**: Hibernation stage (*e*: egg, *e/n*: egg and nymph, *n*: nymph, *a*: adult)
- **Generations**: Number of generations per year (*1.5* stands for *1-2* generations per year)
- **Moisture_pref_mean**: mean of preferred habitat moistures (*1*: xerophilous, *2*: moderately xerophilous, *3*: moderately mesohygrophilous, *4*: mesohygrophilous, *5*: moderately hygrophilous, *6*: hygrophilous, *7*: moderately hydrophilous, *8*: hydrophilous)
- **Moisture_pref_range**: range of preferred habitat moistures (indicating degree of specialization)

en: Insect abundance

en:
Abundance of adult insects recorded in the samplings on all experimental sites

- **Plot**: ID of Plot
- **Treatment**: Experimental treatment
- **Species**: Insect species name (following [Fauna Europaea](https://fauna-eu.org))
- **Author**: Author and year of species' description (following [Fauna Europaea](https://fauna-eu.org))
- **Group**: Insect group as used in the analyses
- **Number_Adults**: Number of adult individuals recorded
- **Herbivore**: Logical indicating whether the species is feeding as a herbivore (*TRUE*) or not (*FALSE*)

en: Plot information

en:
Information on the experimental plots.

- **Plot**: ID of Plot
- **Treatment**: Experimental treatment
- **Landuse_history**: recent agricultural use for Initial; agricultural use before restoration for all restored sites
- **Last_tilled**: Last time the site was tilled
- **Intensity**: Frequency and intensity of mowing and manuring (*intensity1*: mowing once and no manure, i*ntensity2*: 2-3 times mowing and no manure, *intensity3*: 2-3 times mowing and manuring, *intensity4*: 4-5 times mowing and manuring)
- **Slope**: slope gradient according to classes defined by FAO (1990)
- **X**: X coordinate of the plot (CH1903)
- **Y**: Y coordinate of the plot (CH1903)
- **Cluster**: Spatial cluster of the plot

en:
This dataset contains all data, on which the following publication below is based.

**Paper Citation**:

Neff, F., Resch, M. C., Marty, A., Rolley, J. D., Schütz, M., Risch, A. C, Gossner, M. M. 2020. Long-term restoration success of insect herbivore communities in semi-natural grasslands: a functional approach. Ecological Applications, 30, e02133. [10.1002/eap.2133](https://doi.org/10.1002/eap.2133)

Please cite this paper together with the citation for the datafile.

 Methods

 Study site
The study area is situated within and nearby to Eigental nature reserve (47°27’36” to 47°29’06” N, 8°37’12” to 8°37’44” E, 461 to 507 m a.s.l.) in the vicinity of Zurich airport (Canton Zurich, Switzerland). Mean annual precipitation and temperature is 903 ± 136 mm and 9.14°C ± 0.50°C (mean ± SD for 2007-2017 (*MeteoSchweiz 2018*)). In 1967, the Eigental nature reserve was established to protect small and isolated remnants of species-rich, semi-natural grasslands (roughly 12 ha), which were embedded in an otherwise intensively managed landscape. It is characterized by oligo- to mesotrophic Molinion (semi-wet, matrix species *Molinia caerulea*) and Mesobromion (semi-dry, matrix species *Bromus erectus*) meadows (*Delarze et al. 2015*), reflecting small-scale habitat heterogeneity, mainly due to site-specific groundwater levels and slope inclination. As in most Central European grasslands, management is necessary to prevent shrub and tree invasions as well as to secure low levels of available soil nutrients and thus to maintain these species-rich habitats ([*Poschlod and WallisDeVries 2002*](https://doi.org/10.1016/S0006-3207(01)00201-4)).
In 1990, the government of the Canton Zurich decided to enlarge the Eigental nature reserve as a counter measure against degradation and biodiversity loss in semi-natural grasslands due to overutilization and the excessive input of nutrients (mostly nitrogen). Eleven patches of adjacent intensively managed grassland (in total roughly 20 ha) were targeted to be transformed into semi-natural grasslands. As a first restoration measure, fertilization was ceased, and biomass harvested three times to remove excessive soil nutrients from the original system and thus benefit plant species with low competitive ability on the long run. In 1995, the restoration efforts were increased and a large-scale experiment comprising three restoration measures with increasing intervention intensities was implemented:

- **Harvest only**: Initial restoration measures were continued with mowing and removing of the aboveground biomass two times a year (early summer and autumn).
- **Topsoil**: Removal of topsoil, depending on the thickness of the A horizon the upper 10 to 20 cm, in four randomly selected areas within the eleven patches in late autumn 1995. The size of the restoration area depended on individual patch size (2700 to 7000 m2).
- **Topsoil + Propagules**: Plant propagules were added on half of the area where topsoil was removed via application of fresh, seed-containing hay and hand-collected propagules of target species originating from semi-dry and semi-wet species-rich grasslands with local and regional provenance (within radius of 7 to 30 km) (1995, 1996, 1997).

Management of *Topsoil* and *Topsoil + Propagules* started five years after treatment implementation and included yearly mowing and removing of aboveground biomass (late summer or early autumn). The experiment was complemented with intensively managed grassland sites that share the same agricultural history as the restored sites (**Initial**; swards dominated by *Lolium perenne*, *L. multiflorum* and *Trifolium repens*): mowing and subsequent fertilizing (manure) up to five times a year, as well as different tillage regimes. Finally, sites were selected in target semi-dry and semi-wet grasslands (**Target**) located within the Eigental nature reserve and another nature reserve nearby (Altläufe der Glatt; 47°28’29” to 47°27’41” N, 8°31’56” to 8°32’26” E, 418 to 420 m a.s.l.). The selected target sites are mown and aboveground biomass removed once a year in late summer or early autumn. For each of the five treatments, we selected eleven plots (5 m × 5 m) spread across the sites. Altogether, the experiment included 55 plots.

 Arthropod sampling
Aboveground arthropods were sampled using suction sampling on four consecutive days in early July 2017 before the grasslands were mown. Arthropods were sampled in two locations on each 5 m × 5 m plot, once in the south-western and once in the north-eastern corner to account for possible spatial heterogeneity within the plots. Arthropods were sorted to order or lower taxonomic levels and individuals were identified to species level. We focused on three groups (Hemiptera: Auchenorrhyncha, Hemiptera: Heteroptera, Orthoptera),

 Functional traits
We used two sets of functional traits in this study.

**Morphometric traits**:
Body volume, body shape, hind femur shape, hind/front leg ratio, wing length, leg length, antenna length and eye width. We used trait measurements from [*Simons et al. (2016)*](http://dx.doi.org/10.1890/15-0616.1) and [*Neff et al. (2019)*](https://doi.org/10.1007/s10980-019-00872-1) and complemented them with measurements on study specimens. These measurements were conducted using a high-resolution measuring stereo microscope (Leica DVM6, Leica Microsystems) including automated high-resolution photo stacking with the software Leica Application Suite X (LAS X, © 2018 Leica Microsystems CMS GmbH) and Leica Map Premium (Leica Microsystems, © 1996-2017 Digital Surf) at WSL Birmensdorf. The eight morphometric traits were calculated from direct measurements of body parts on specimens of all sampled species. From each species, we measured at least one female and one male specimen. Additionally, for species that show wing dimorphism, we included the different wing morphs and weighted them by their prevalence reported in literature. For few species, of which not all wing morphs were available for measurements (10 cases), we estimated relative wing length from congeneric species or from the literature.

**Life-history traits**
Based on an existing data set collected by [*Gossner et al. (2015)*](http://dx.doi.org/10.1890/14-2159.1). We included traits describing different life-history characteristics of herbivore insect species, namely: feeding specialization, feeding tissue, hibernation stage and number of generations per year, which are related to insect species’ vulnerability to changes in plant community composition, microhabitat use and disturbance tolerance. To represent potential changes in habitat moisture with abandonment of intensive land use (e.g., change in ground-water level), we also included two traits related to preferred habitat moisture of the study species: moisture preference, describing species’ optimum habitat moisture, and moisture range, which describes the species’ range of preferable moisture conditions.

 References

Delarze, R., Y. Gonseth, S. Eggenberg, and M. Vust. 2015. Lebensräume der Schweiz: Ökologie - Gefährdung - Kennarten. 3rd ed. Ott, Bern.

Gossner, M. M., N. K. Simons, R. Achtziger, T. Blick, W. H. O. Dorow, F. Dziock, F. Köhler, W. Rabitsch, and W. W. Weisser. 2015. A summary of eight traits of Coleoptera, Hemiptera, Orthoptera and Araneae, occurring in grasslands in Germany. Scientific Data 2:150013.

MeteoSchweiz. 2018. Klimabulletin Jahr 2017. MeteoSchweiz, Zürich.

Neff, F., N. Blüthgen, M. N. Chisté, N. K. Simons, J. Steckel, W. W. Weisser, C. Westphal, L. Pellissier, and M. M. Gossner. 2019. Cross-scale effects of land use on the functional composition of herbivorous insect communities. Landscape Ecology 34:2001–2015.

Poschlod, P., and M. F. WallisDeVries. 2002. The historical and socioeconomic perspective of calcareous grasslands—lessons from the distant and recent past. Biological Conservation 104:361–376.

Simons, N. K., W. W. Weisser, and M. M. Gossner. 2016. Multi-taxa approach shows consistent shifts in arthropod functional traits along grassland land-use intensity gradient. Ecology 97:754–764.

diversity

display_name: diversity

functional-diversity

display_name: functional-diversity

functional-traits

display_name: functional-traits

grassland

display_name: grassland

insects

display_name: insects

long-term-experiment

display_name: long-term-experiment

restoration

display_name: restoration

topsoil-removal

display_name: topsoil-removal

en: Grassland restoration: insects and insect traits


snow-depth-mapping

maintainer: Mauro Marty

title_for_slug: snow-depth-mapping

en: image-matching aerial-imagery snow-hydrology snow-water-equivalent avalanche snow-depth dsm

en: Snow depth map 20100416

media_type: image/tiff

en: Snow depth map generated from ADS 80 imagery (CIR). GSD of imagery = 0.25 m

format: TIFF

mimetype: image/tiff

en: Snow depth map 20160309

en: Snow depth map 20120320

en: Snow depth map 20140417

en: Snow depth map generated from ADS 100 imagery (CIR). GSD of imagery = 0.18 m

en: Snow depth map 20130415

en: Snow depth map 20160126

en:
Snow depth map generated from ADS 100 imagery (CIR). GSD of imagery = 0.16 m
Because of very diffuse light conditions at time of image acquisition the quality of the resulting snow depth values are in some regions quite poor.

en: Snow depth map 20160420

en: Snow depth map 20150415

en:
The available datasets are snow depth maps with a spatial resolution of 2m generated from image matching of ADS 80/100 data. Image acquisition took place at peak of winter (time when the thickest snowpack is expected). The snow depth maps are the difference of a summer DSM from the winter DSM of the corresponding date . The summer DSM used is a product of image matching of ADS 80 data from summer 2013. In the available products buildings, vegetation and outliers were masked (set to NoData).
For the elimination of buildings the TLM layer (swisstopo) was used, because this layer might not represent exactly the
state of infrastructure at time of image acquisition, it is possible that mainly in dense settlement some buildings were not successfully masked. For the relevant area above treeline the masking of buildings showed good results. Vegetation got masked for a height above ground > 1m and was detected in a combination of summer and winter data sets. As Outliers were considered unrealistic snow depths caused by a failure of the image matching algorithm. Snow depths > 15m and smaller than < -15m were classified as outliers. Negative snow depth were kept, because of an uncertainty in image orientation accuracy. It is expected that in regions with negative snow depth also positive snow depth are underestimated by the same amount, which means that an estimation of snow volume should be carried out summing up the absolute values of snow depth (also the negative ones). For volume estimation in small regions the user has to take into account, that orientation accuracy of the images is roughly around 1-2 GSD (30cm), which propagates directly to the snow depth product. Areas which are not covered by snow got assigned a value of 0 as snow depth.

The work is published in:

Bühler, Y.; Marty, M.; Egli, L.; Veitinger, J.; Jonas, T.; Thee, P.; Ginzler, C., (2015). Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9 (1), 229-243. doi: 10.5194/tc-9-229-2015

aerial-imagery

display_name: aerial-imagery

avalanche

display_name: avalanche

dsm

display_name: dsm

image-matching

display_name: image-matching

snow-depth

display_name: snow-depth

snow-hydrology

display_name: snow-hydrology

snow-water-equivalent

display_name: snow-water-equivalent

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal


maintainer: EnviDat Support

en: european-alps land-use-change taxonomic-diversity functional-diversity conservation global-change zonation species-distribution-models beta-diversity plants phylogenetic-diversity migclim

en: Data Access

en:
This repository contains extensive data for the European Alps:
  - Observations of ~3,500 plant species
  - Climate (1-km), soil (100-m) and land cover predictors (1km); current and future scenarios (28 CMIP6-GCMs, 2 land cover change and 3 dispersal scenarios i.e., unlimited, no and realistic vegetation dispersal)
  - Flora migration rates (categorical) and ecological preferences (continuous indicator values)
  - Regional maps of barriers to migration and water bodies at 100-m resolution
  - Sampling effort, distance to roads and cities predictors at 100-m resolution
  - Present and future abundances over the study region at 1-km resolution (~2,000 species)
  - Present and future multifaceted and uniqueness of the European Alps' Flora at 1-km resolution
  - Present and future conservation recommendations at 1-km resolution (26 current and future strategies)
  - Phylogenetic data and functional traits of ~2,000 plants (raw data and classification trees)
  - All scripts, data and plots used for the analyses, including a singularity container (mini-linux) to run them

beta-diversity

display_name: beta-diversity

conservation

display_name: conservation

european-alps

display_name: european-alps

global-change

display_name: global-change

land-use-change

display_name: land-use-change

migclim

display_name: migclim

phylogenetic-diversity

display_name: phylogenetic-diversity

plants

display_name: plants

species-distribution-models

display_name: species-distribution-models

taxonomic-diversity

display_name: taxonomic-diversity

zonation

display_name: zonation

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Present and future multifaceted plant diversity, uniqueness and conservation in the European Alps