maintainer: Anita C. Risch

en: nutrient-network fertilization mineralization nitrification herbivore ammonification grassland climate nitrogen soil global-change

en: Risch et al. 2020 - Raw data for publication "Global impacts of fertilization and herbivore removal on soil net nitrogen mineralization are modulated by local climate and soil properties"

en:
we assessed how the removal of mammalian herbivores (Fence) and fertilization with growth-limiting nutrients (N, P, K, plus nine essential macro- and micronutrients; NPK) individually, and in combination (NPK+Fence), affected potential and realized soil net Nmin across 22 natural and semi-natural grasslands on five continents. Our sites spanned a comprehensive range of climatic and edaphic conditions found across the grassland biome. We focused on grasslands, because they cover 40-50% of the ice-free land surface and provide vital ecosystem functions and services. They are particularly important for forage production and C sequestration. Worldwide, grasslands store approximately 20-30% of the Earth’s terrestrial C, most of it in the soil (Schimel, 1995; White et al., 2000).

Study sites and experimental design
The 22 sites contributing to this project are part of the Nutrient Network Global Research Cooperative (NutNet, https://nutnet.umn.edu/). Mean annual temperature across our 22 sites ranged from -4 to 22°C, mean annual precipitation from 252 to 1,592 mm, and elevations from 6 to 4,261 m above sea level (Fig. 1, Supplementary Table S1). Soil organic C varied from 0.8 to 7.8%, soil total N from 0.1 to 0.6%, and the soil C:N ratio from 9.1 to 21.5. Soil clay content spanned from 3.0 to 35%, and soil pH from 3.4 to 7.6 (Supplementary Table S2). Thus, the sites covered a wide range of environments in which grasslands occur (Fig. 1, Supplementary Table S1 & S2).
At each site, the effects of nutrient addition and herbivore removal were tested via a randomized-block design (Borer et al., 2014; Supplementary Fig. S1a). Three replicate blocks with 10 treatment plots each were established at each site, with the exception of the site at bldr.us, where only two blocks were established (Supplementary Fig. S1a). The 10 plots were randomly assigned to a nutrient or fencing treatment, but only a subset of four plots was used in the current study, each with a different treatment (see below; Supplementary Fig. S1a). All plots were 5 x 5 m and divided into four 2.5 x 2.5 m subplots (Supplementary Fig. S1b). Each subplot was further divided into four 1 x 1 m square sampling plots, one of which was set aside for soil sampling (Borer et al., 2014; Supplementary Fig. S1b). Plots were separated by at least 1 m wide walkways.
In this study, we collected data from the following four treatments: (i) untreated control plots (Control), (ii) herbivore removal plots (Fence), (iii) plots fertilized with N, P, K, plus nine essential macro and micronutrients (NPK), and (iv) plots with simultaneous fertilizer addition and herbivore removal (NPK+Fence; Supplementary Fig. S1a). The number of years of treatment differed among sites (2 – 9 years since start of treatment; Supplementary Table S1). For the nutrient additions, all sites applied 10 g N m-2 yr-1 as time-release urea; 10 g P m-2 yr-1 as triple-super phosphate; 10 g K m-2 yr-1 as potassium sulfate. A micro-nutrient mix (Fe, S, Mg, Mn, Cu, Zn, B, Mo, Ca) was applied at 100 g m-2 together with K in the first year of treatments but not thereafter.
The vertebrate herbivore removal treatment (Fence) was established by fencing two plots, one control and one NPK plot, within each of the blocks (Supplementary Fig. S1a). We designed the fences so that they would effectively exclude aboveground mammalian herbivores with a body mass of over 50 g (Borer et al., 2014). At the majority of sites, the height of the fences was 180 cm, and the fence design included wire mesh (1 cm holes) on the first 90 cm along with a 30 cm outward-facing flange stapled to the ground to exclude burrowing animals; climbing and subterranean animals may potentially still access these plots (Borer et al., 2014). For slight modifications in fence design at a few sites see Supplementary Table S3. While most sites only had native herbivores, a few sites (4) were also grazed by domestic animals (Supplementary Table S1).
Potential and realized soil net N mineralization, ammonification, nitrification and other soil properties
Each site participating in the study received a package containing identical material from the Swiss Federal Institute for Forest, Snow and Landscape Research (WSL) to be used for sampling and on-site N incubations. For the field incubation, we followed the protocol by Risch et al. (2015, 2019). Briefly, we drove a 5 x 15 cm (diameter x depth) steel cylinder 13.5 cm deep into the soil after clipping the vegetation at randomized locations in each plot. The top 1.5 cm of the cylinder remained empty to capture incoming N from run-off or deposition with a polyester mesh bag (mesh-size 250 µm) filled with 13.2 ± 0.9 g of acidic and alkaline exchanger resin (1:1 mixture; ion-exchanger I KA/ion-exchanger III AA, Merck AG, Darmstadt). The bag was fixed in place with a metal Seeger ring (Bruetsch-Rüegger Holding, Urdorf, Switzerland). We then removed 1.5 cm soil at the bottom of the cylinder and placed another resin bag to capture N leached from the soil column. The exchange resin was saturated with H+ and Cl- prior to filling the bags by stirring the mixture in 1.2M HCl for 1 h and then rinsing it with demineralized water until the electrical conductivity of the water reached 5 μS/cm. The cylinders were then re-inserted into the cored hole, level with the soil surface, and incubated for an average of 42 days (range 40 to 57days). The individual site coordinators chose the timing of incubation to start approximately six weeks prior to peak plant biomass production. All incubations were completed between February 2015 and January 2016 accounting for differences in growing season between northern and southern hemispheres. At the end of the incubation, the cylinders were re-collected and immediately shipped to WSL in an insulated box together with cold packs to halt further mineralization. Gloves were worn at all times to avoid contamination of the samples. Upon arrival at WSL, we extracted the resin bags and a 20 g subsample of sieved soil (4 mm) separately in a 100 ml PE-bottle with 80 ml 1 M KCl for 1.5 h on an end-over-end shaker and filtered through ashless folded filter paper (DF 5895 150, ALBET LabScience). We measured NO3- (colorimetrically; Norman & Stucki, 1981) and NH4+concentrations (flow injection analysis; FIAS 300, Perkin Elmer) on these filtrates.
At the start of the field incubation, we additionally collected two soil cores of 5 x 12 cm (diameter x depth) in each sampling plot and composited them to measure potential soil net Nmin, soil chemical and biological properties (see below). We also collected an additional sample (5 x 12 cm) to assess soil physical properties, which remained within the steel cylinder. Both ends were tightly closed with plastic caps. Cores were carefully packed to avoid further disturbance, and together with the composited soil samples, were shipped to the laboratory at WSL within a few days after collection.
From the composited samples, we extracted an equivalent of 20 g dry soil with KCl, as described above, and measured NO3- and NH4+concentrations. Realized soil net Nmin was then calculated as the difference between the inorganic N content of samples collected at the end of the incubation (plus N extracted from the bottom resin bag) and the N content at the beginning of the incubation; values were scaled to represent daily mineralization rates (mg N kg-1soil d-1; Risch et al., 2015). Realized soil net Nmin values represent an average period of 42 days prior to peak biomass, typically the highest period of biological activity, and not the entire year (Risch et al., 2019).
A second subsample of the composited sample was used to determine potential soil net Nmin in the laboratory (Risch et al., 2019). Briefly, we weighed duplicate samples (8 g dry soil) into 50-ml Falcon tubes. Soil moisture was brought to 60% of the field capacity of each plot, the Falcon tubes tightly closed and then incubated at 20°C for 42 days in a dark room. Every week the Falcon tubes were opened and ventilated. At the end of the incubation, the soil samples were extracted the same way as described above and NO3- and NH4+ was determined. Potential soil net Nmin was calculated as the difference between the N content before and after the incubation and scaled to represent daily values (mg N kg-1soil d-1). Using our NO3- and NH4+ measures we also calculated potential and realized soil net nitrification and soil net ammonification to be able to better understand the drivers of fertilization and herbivore removal effects on potential and realized soil net Nmin.
A third subsample of the composite soil sample was sieved (2 mm mesh) and microbial biomass (μg Cmic g-1 soil dry weight) was estimated by measuring the maximal respiratory response to the addition of glucose solution (4 mg glucose per g soil dry weight dissolved in distilled water; substrate-induced respiration method) on approximately 5.5 g of soil (Anderson & Domsch, 1978). The rest of the composited sample was dried at 65°C for 48 h, ground and sieved (2 mm mesh) to assess a series of soil chemical properties (Risch et al., 2019). We measured the percentage of clay as an indicator of soil texture (Gee & Bauder, 1986; Risch et al., 2019).
Statistical analyses
Potential and realized soil net Nmin were square root transformed to account for a highly skewed data distribution (yt = sign(y)*sqrt|y|; negative values in the data set impeded log transformation). To assess treatment effects on potential and realized soil net Nmin, we used linear mixed effects models (LMMs) fitted by maximum likelihood using the lme function from the nlme package (version 3.131.1; Pinheiro et al., 2016), R version 3.6.1; R Foundation for Statistical Computing. Treatment (Control, Fence, NPK, NPK+Fence) was a fixed factor, with site and block as random factors, where block was nested within site. We also tested for effects of time since start of treatments in preliminary analyses by adding total treatment years as an additional fixed factor. We did not find a significant effect of years of treatment, and thus dropped this variable from the models. The LMMs were corrected using varIdent if the homogeneity of variance criterion was not met (Pinheiro et al., 2016). To visualize our results, we calculated treatment effects using Cohens’ d statistic (Cohen, 1977; Koricheva et al., 2013). Note that calculating response ratios (or log response ratios) was not possible with our data, as we have both negative and positive values. We also fitted LMMs for potential and realized soil net ammonification and nitrification to gain more insight into how global change affects the processes underpinning potential and realized soil net Nmin. We also sqrt-transformed (see above) these dependent variables. Treatment was included as a fixed factor with random factors as described above. In addition, we assessed how potential and realized soil net Nmin were related to potential and realized soil net ammonification and nitrification, respectively. For this, we calculated site averages for each treatment separately. We then ran LMMs, with potential and realized soil net Nmin as the dependent variable, potential and realized soil net ammonification/nitrification as the independent ones. Site was included as a random factor.
Based on our previous work (Risch et al., 2019) and the existing literature (Schimel & Bennett, 2004; Liu et al., 2017), we developed a priori causal conceptual models of relationships among treatments, environmental drivers, and potential and realized soil net Nmin (Supplementary Fig. S2) to test with structural equation modelling (SEM) using a d-sep approach (Shipley, 2009; Lefcheck, 2016). The variables included in the model were long-term climatic conditions, specifically, site-level mean annual precipitation (MAP) and temperature of the wettest quarter (T.q.wet), plot-level soil texture (clay content) and soil microbial biomass. Mean annual precipitation and T.q.wet were obtained from WorldClim (Hijmans et al., 2005) (http://www.worldclim.org/) and together with the experimental treatments were predicted to directly affect soil properties and soil net Nmin (Supplementary Fig. S2). Soil clay content was, in turn, predicted to affect microbial biomass and soil net Nmin. Because we determined microbial biomass prior to incubating the samples in the laboratory or field, we assumed that the abundance of these microbes would be responsible for N process rates and not vice versa (Supplementary Fig. S2). We tested our conceptual model (Supplementary Fig. S2) using the piecewiseSEM package (version 2.0.2; Lefcheck, 2016) in R 3.4.0, in which a structured set of linear models are fitted individually. This approach allowed us to account for the nested experimental design, and overcome some of the limitations of standard structural equation models, such as small sample sizes (Shipley, 2009; Lefcheck, 2016). We used the lme function of the nlme package to model response variables, including site as a random factor. Good fit of the SEM was assumed when Fisher’s C values were non-significant (p > 0.05). For all significant interactions between covariates and experimental treatments detected in the SEMs, we calculated treatment effect sizes, i.e. the differences in potential or realized soil net Nmin between Control and treatments (Fence, NPK, NPK+Fence) and plotted these values against the climate or soil covariates. Finally, we fitted LMMs for the soil variables included in our SEMs, with treatment as the fixed factor, and with site and block as random factors, where block was nested within site.

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch Anita C., Zimmermann, Stefan, Moser, Barbara, Schütz, Martin, Hagedorn, Frank, Firn, Jennifer, Fay, Philip A., Adler, Peter B., Biederman, Lori A., Blair, John M., Borer, Elizabeth T., Broadbent, Arthur A.D., Brown, Cynthia S., Cadotte, Marc W., Caldeira, Maria C., Davies, Kendi F., di Virgilio, Augustina, Eisenhauer, Nico, Eskelinen, Anu, Knops, Johannes M.H., MacDougall, Andrew S., McCulley, Rebecca L., Melbourne, Brett A., Moore, Joslin L., Power, Sally A., Prober, Suzanne M., Seabloom, Eric W., Siebert, Julia, Silveira, Maria L. , Speziale, Karina L., Stevens, Carly J., Tognetti, Pedro M., Virtanen, Risto, Yahdjian, Laura, Ochoa-Hueso, Raul (accepted). Global impacts of fertilization and herbivore removal on soil net nitrogen mineralization are modulated by local climate and soil properties. Global Change Biology

Please cite this paper together with the citation for the datafile.

We assessed how the removal of mammalian herbivores (Fence) and fertilization with growth-limiting nutrients (N, P, K, plus nine essential macro- and micronutrients; NPK) individually, and in combination (NPK+Fence), affected potential and realized soil net Nmin across 22 natural and semi-natural grasslands on five continents. Our sites spanned a comprehensive range of climatic and edaphic conditions found across the grassland biome. We focused on grasslands, because they cover 40-50% of the ice-free land surface and provide vital ecosystem functions and services. They are particularly important for forage production and C sequestration. Worldwide, grasslands store approximately 20-30% of the Earth’s terrestrial C, most of it in the soil (Schimel, 1995; White et al., 2000).

ammonification

display_name: ammonification

climate

display_name: climate

fertilization

display_name: fertilization

global-change

display_name: global-change

grassland

display_name: grassland

herbivore

display_name: herbivore

mineralization

display_name: mineralization

nitrification

display_name: nitrification

nitrogen

display_name: nitrogen

nutrient-network

display_name: nutrient-network

soil

display_name: soil

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Anthropogenic change and soil net N mineralization


maintainer: Elisabeth Hafner

en: satellite snow avalanche natural-hazard hazard-mapping

state: active

type: dataset

en: SPOT6 Avalanche Outlines 16 January 2019

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset and within the limitations of the dataset described in the publications.

format: SHP

en:
Outlines of 6'041 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 16 January 2019. The dataset was acquired following a period with very high avalanche danger. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping16012019.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

The data was comprehensivly validated in a subset area in

Hafner, E.D.; Techel, F.; Leinss, S.; Bühler, Y., 2021: Mapping avalanches with satellites - evaluation of performance and completeness. Cryosphere, 15, 2: 983-1004. doi: 10.5194/tc-15-983-2021

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: SPOT6 Avalanche outlines 16 January 2019


radiosondes

maintainer: Jörg Wieder

title_for_slug: radiosondes

en: pressure wind-direction relative-humidity temperature wind holoballoon raclets radiosonde

en: Radiosond Template Files

media_type: application/zip

en:
The "template" files contain standard parameters, i.e. ambient pressure (mbar and Pa), temperature (°C), relative humidity (%), wind speed (m s‾ ¹) and wind direction (true deg), as well as additional information, e.g. time (UTC and local time), dew point (°C), mixing ration (g/kg), density (kg m³), altitude (m MSL), height above ground (ft and m AGL), and geographic coordinates (longitude, latitude). If the wind speed was zero, no wind direction is given.
The zip files contain ascents on the following days:
February 10 (morning and afternoon),
February 11 (morning),
February 16 (afternoon),
February 22 (morning),
March 1 (morning),
March 5 (morning),
March 11 (morning),
March 12 (morning),
March 13 (morning),
March 14 (morning),
March 17 (afternoon), and
March 18.
The data was managed with Windsond Receiver Application Demo Version 2.92, (C) Sparv Embedded AB 2016.

format: ZIP

mimetype: application/zip

en: Radiosond Sounding Files

en:
The "soundings" radiosond data contains information on ambient pressure (mbar), temperature (C), relative humidity (%), wind speed (m s‾ ¹) and wind direction (true deg), and are ordered with respect to the height above ground (m AGL) with a step size of 20 m. The first line of each file idicates the geographic location and the start time (in UTC) of the ascent. If the wind speed was zero, no wind direction is given.
The zip files contain ascents on the following days:
February 10 (morning and afternoon),
February 11 (morning),
February 16 (afternoon),
February 22 (morning),
March 1 (morning),
March 5 (morning),
March 11 (morning),
March 12 (morning),
March 13 (morning),
March 14 (morning),
March 17 (afternoon), and
March 18.
The data was managed with Windsond Receiver Application Demo Version 2.92, (C) Sparv Embedded AB 2016.

en: Radiosondes (Windsond, Sparv Embedded AB) were started in Davos Wolfgang (LON: 9.853594, LAT: 46.835577) to report height profiles of pressure, relative humidity and temperature at specific days. In addition to regular launches of radiosondes, sondes were attached to [HoloBalloon](https://www.envidat.ch/group/clouds-in-situ-raclets) to report the ambient conditions of the in-situ measurements. Further profiles of meteorological measures were recorded at [HoloGondel](https://www.envidat.ch/group/clouds-in-situ-raclets) which was installed at the gondola moving between Gotschnaboden and Gotschnagrat at 2285 m a.s.l.

holoballoon

display_name: holoballoon

pressure

display_name: pressure

raclets

display_name: raclets

radiosonde

display_name: radiosonde

relative-humidity

display_name: relative-humidity

temperature

display_name: temperature

wind

display_name: wind

wind-direction

display_name: wind-direction

en: Radiosondes


maintainer: Roksolana Petrovska

en: dominance acer fagus shade-tolerance lar regeneration mortality-rate

en: Mortality of regeneration

media_type: text/csv

en: Acer platanoides, Acer pseudoplatanus and Fagus sylvatica living and dead juveniles (0-500 cm in height) grown in the deep shade of a prime beech-dominated forest.

format: CSV

en: The R-script of survival analysis for accelerated failure time model

format: SERVICE

en:
 One individual per species, vitality class (low and high) and height class (eight classes: 0–10, 11–20, 21–35, 36–60, 61–90, 91–130, 131–200 and 201–500 cm) was randomly selected and harvested in each of the six plots. This resulted in a sample of 82, 80 and 89 living individuals of A. platanoides, A. pseudoplatanus and F. sylvatica, respectively.

 Additionally stems of dead Acer spp. and F. sylvatica trees that had died within the last three years (2015–2018) were randomly harvested, matching the height classes of the harvested living trees wherever possible. In total, 179 dead young trees (60 A. platanoides, 72 A. pseudoplatanus and 47 F. sylvatica) were collected.

 Variables:
* species_code: a_pla - Acer platanoides, a_pse - Acer pseudoplatanus, f_syl - Fagus sylvatica
* species: as above
* dummy: 0 - living individual, 1 - dead individual
* LAR_cm2_g: leaf area ratio or ratio of leaf area to total plant biomass, [cm2/g]
* tree_age: in years
* avg_ring_micron: average width of the last 5 rings in tree life excluding the last ring
* dry_mass_g: aboveground and belowground biomass
* DLI: direct light index (measured only under living individuals)
* BLI: diffuse light index (measured only under living individuals)
* GLI: global light index

acer

display_name: acer

dominance

display_name: dominance

fagus

display_name: fagus

lar

display_name: lar

mortality-rate

display_name: mortality-rate

regeneration

display_name: regeneration

shade-tolerance

display_name: shade-tolerance

en: Mortality of regeneration: Acer spp. and Fagus sylvatica


maintainer: EnviDat Support

en: uas swe remote-sensing snow-depth snow

en: HS map Brämabül, 14. April 2015

media_type: image/tiff

en:
10 cm resolution
15 cm accuracy

format: TIFF

mimetype: image/tiff

en: .tfw file

en: coordinates for the .tif raster

en:
This snow depth map was generated 14 January 2015, close to peak of winter accumulation, applying Unmanned Aerial System digital surface models with a spatial resolution of 10 cm. The covered area is 285'000 m2 at the top of Brämabüel, 2490 m a.s.l. covering all expositions. Coordinate system: CH1903LV03.

A detailed description is given here:

Bühler, Y., Adams, M. S., Bösch, R., and Stoffel, A.: Mapping snow depth in alpine terrain with unmanned aerial systems (UASs): potential and limitations, The Cryosphere, 10, 1075-1088, 10.5194/tc-10-1075-2016, 2016.

Abstract:
Detailed information on the spatial and temporal distribution, and variability of snow depth (HS) is a crucial input for numerous applications in hydrology, climatology, ecology and avalanche research. Nowadays, snow depth distribution is usually estimated by combining point measurements from weather stations or observers in the field with spatial interpolation algorithms. However, even a dense measurement network is not able to capture the large spatial variability of snow depth in alpine terrain.
Remote sensing methods, such as laser scanning or digital photogrammetry, have recently been successfully applied to map snow depth variability at local and regional scales. However, such data acquisition is costly, if manned airplanes are involved. The effectiveness of ground-based measurements on the other hand, is often hindered by occlusions, due to the complex terrain or acute viewing angles. In this paper, we investigate the application of unmanned aerial systems (UAS), in combination with structure-from-motion photogrammetry, to map snow depth distribution. Such systems have the advantage that they are comparatively cost-effective and can be applied very flexibly to cover also otherwise inaccessible terrain. In this study we map snow depth at two different locations: a) a sheltered location at the bottom of the Flüela valley (1900 m a.s.l.) and b) an exposed location (2500 m a.s.l.) on a peak in the ski resort Jakobshorn, both in the vicinity of Davos, Switzerland. At the first test site, we monitor the ablation on three different dates. We validate the photogrammetric snow depth maps using simultaneously acquired manual snow depth measurements. The resulting snow depth values have a root mean square error (RMSE) better than 0.07 to 0.15 m on meadows and rocks and a RMSE better than 0.30 m on sections covered by bushes or tall grass. This new measurement technology opens the door for efficient, flexible, repeatable and cost effective snow depth monitoring for various applications, investigating the worlds cryosphere.

remote-sensing

display_name: remote-sensing

snow-depth

display_name: snow-depth

swe

display_name: swe

uas

display_name: uas

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: UAS based snow depth maps Brämabüel, Davos, CH


maintainer: Zhao

en: driving-factors austin land-dynamics planning urban-land-use

en: Potential driving factors of urban transformations of Austin over 25 years

en: In this study, the Austin metropolitan area, Texas, U.S., one of the fastest urban transformations and transformations regions, is selected to test the hypothesis that spatial planning and policies are important factors of urban transformations. Despite ample previous work in understanding the interactions between human and urban form transformation at specific areas, the actual interventions and outcomes of planning and policies (e.g., ‘smart growth’) on urban forms have been poorly measured. In this study, the potential influencing factors of urban transformations of Austin over 25 years were selected and collected.

austin

display_name: austin

driving-factors

display_name: driving-factors

land-dynamics

display_name: land-dynamics

planning

display_name: planning

urban-land-use

display_name: urban-land-use


disdrometer-data-davos-wolfgang

title_for_slug: disdrometer-data-davos-wolfgang

en: precipitation fall-velocity raclets disdrometer davos

en: Disdrometer Data Davos Wolfgang

en:
The zip folder contains one netCDF file per day for Davos Wolfgang from February 8 to March 19 2019 with a temporal resolution of 30 seconds (time in UTC) and includes:

- characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...)
- precipitation rate
- radar reflectivity
- visibility range
- weather codes
- instrument performance

en: The dataset contains information on precipitation amount and type for Davos Wolfgang (LON: 9.853594, LAT: 46.835577) from February 8 to March 19 2019. It includes: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

davos

display_name: davos

disdrometer

display_name: disdrometer

fall-velocity

display_name: fall-velocity

precipitation

display_name: precipitation

raclets

display_name: raclets


soil-respiration-exclosure-experiment

title_for_slug: soil-respiration-exclosure-experiment

en: grazing grassland subalpine soil-respiration ungulates

en: Soil respiration Switzerland

en:
ID: Fence number

Year	:Year of sampling

mean.CO2: soil respiration measured with PP-systems SRC-1 soil respriation chamber attached to a EGM-4 infrared gas analyser; units CO2 g m-2 h-1

Grassland: Grasslands where fences were errected. Note that on large grasslands (STAB, GRIM, MING) 2 pairs of fences were errected (2 in short, 2 in tall-grass vegetation), on small grasslands (DADA, MARG, BOTS) only one pair of fences was errected (1 short-grass; one-tallgrass vegetation)

Fence: Fence number; un-even numbers on short-grass vegetation (1,3,5,7,9,11,13,15,17), even numbers on tall-grass vegetation (2,4,6,8,10,12,14,16,18)

Vegetation:	1 = shortgrass vegetation, 2 = tall-grass vegetation (9 replicate fences on each vegetation type)

Treatment	: 1 = all herbivores grazing, 2 = large ungulates (red deer, chamois) excluded

format: XLS

en:
Location of data collection
The Swiss National Park (SNP) is located in the southeastern part of Switzerland, and covers an area of 170 km2, 50 km2 of which is forested, 33 km2 is occupied by alpine and 3 km2 by subalpine grasslands. Elevations range from 1350 to 3170 m a.s.l., and mean annual precipitation and temperature are 871 mm and 0.6°C measured at the Park’s weather station in Buffalora (1980 m a.s.l.) between 1960 and 2009 (MeteoSchweiz 2011). Founded in 1914, the SNP received minimal human disturbance for almost 100 years (no hunting, fishing, or camping, visitors are not allowed to leave the trails). Large (> 1 ha) homogeneous patches of short- and tall-grass vegetation characterize the subalpine grasslands. The average vegetation height of short-grass vegetation is 2 to 5 cm. Red fescue (Festuca rubra L.), quaking grass (Briza media L.) and common bent grass (Agrostis tenuis Sipthrob) are the predominating plant species in this vegetation type. Tussocks of evergreen sedge (Carex sempervirens Vill.) and mat grass (Nardus stricta L.) are predominant in the tall-grass vegetation, which averages 20 cm in vegetation height (Schütz and others 2006). Short-grass vegetation developed in areas where cattle and sheep rested (high nutrient input) during agricultural land-use (from 14th century until 1914); tall-grass vegetation developed in areas where cattle and sheep used to graze, but did not rest (Schütz and others 2003, 2006). Herbivores were shown to consume > 60% of the biomass in short-grass compared to < 20% in tall-grass vegetation (Schütz and others 2006). The herbivore community present in the SNP can be divided into four groups based on body size/weight: large [red deer (Cervus elaphus L.) and chamois (Rupricapra rupricapra L.); 30 - 150 kg], medium [marmot (Marmota marmota L.) and snow hare (Lepus timidus L.); 3 – 6 kg], and small vertebrate herbivores (small rodents: e.g. Clethrionomys spp., Microtus spp., Apodemus spp.; 30 – 100 g) as well as invertebrates (e.g. grasshoppers, caterpillars, cicadas, < 5 g).

Experimental design
We selected 18 subalpine grassland sites (9 short-grass, 9 tall-grass vegetation). The sites were spread across the entire park on dolomite parent material at altitudes of 1975 to 2300 meters. At each site we established an exclosure network (fences) in spring 2009 (early June), immediately after snowmelt. Each exclosure network consisted of a total of five 2 × 3 m sized plots that progressively excluded the different herbivores listed above (further labeled according to the herbivore guilds that had access to the respective plots “All”, “Marmot/Mice/Invertebrates”, “Mice/Invertebrates”, “Invertebrates”, “None”). The “All” treatment was thus accessible to all herbivores, was not fenced and was located at least 5 m away from a 2.1 m tall and 7 × 9 m main fence that enclosed the other four treatments. This fence was constructed of 10 × 10 cm wooden posts and electrical equestrian tape (AGRARO ECO, Landi, Bern, Switzerland; 20 mm width) mounted at 0.7 m, 0.95 m, 1.2 m, 1.5 m and 2.1 m above the ground that were connected to a solar charged battery (AGRARO Sunpower S250, Landi, Bern, Switzerland). We also mounted non-electrically charged equestrian tape at 0.5 m to help exclude deer and chamois, yet allow marmots and hares to enter safely. Within each main fenced area we randomly established four 2 × 3 m plots: (1) The “Marmot/Mice/Invertebrates” plot remained unfenced, thus, with the exception of red deer and chamois, all herbivores were able to access the plot, (2) The “Mice/Invertebrates” plot consisted of a 90 cm high electric sheep fence (AGRARO Weidezaunnetz ECO, Landi, Bern, Switzerland; mesh size 10 × 10 cm) connected to the solar panel and excluded all medium sized mammals (marmots, hares), but provided access for small mammals and invertebrates, (3) The “Invertebrates” plot provided access for invertebrates only and was surrounded by 1 m high metal mesh (Hortima AG, Hausen, Schweiz; mesh size 2 × 2 cm), (4) The “None” plot was surrounded by a 1 m tall mosquito net (Sala Ferramenta AG, Biasca, Switzerland; mesh size 1.5 × 2 mm) to exclude all herbivores. This plot was covered with a roof constructed of a wooden frame lined with mosquito mesh that was mounted on the wooden corner posts. We also treated this plot with a biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) when needed to remove insects that might have entered during data collection or that hatched from the soil.

!!! The here published data set only contains data for “All”, and “Marmot/Mice/Invertebrates” (= ungulates excluded) plots !!!

Data collection
In-situ soil CO2 emissions were measured with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA) on two randomly selected locations on one subplot within each of the 90 plots. For each measurement the soil chamber (15 cm high; 10 cm diameter) was placed on a permanently installed PVC collar (10 cm diameter) driven five centimeters into the soil at the beginning of the study (June 2009). The measurements were conducted between 0900 and 1700 hours every two weeks from early to early September 2009, 2010, 2011 and 2013. Freshly germinated plants growing within the PVC collars were removed prior to each measurement to avoid measuring plant respiration/photosynthesis. The two measurements collected per plot every two weeks were averaged.

Please acknowledge the funding of the study: funded by the Swiss National Science Foundation, SNF grant-no 31003A_122009/1 to Anita C. Risch, Martin Schütz and Flurin Filli

grassland

display_name: grassland

grazing

display_name: grazing

soil-respiration

display_name: soil-respiration

subalpine

display_name: subalpine

ungulates

display_name: ungulates

en: Soil respiration - exclosure experiment


en: emma tracers mixing-models stable-isotopes end-member-mixing-analysis eemma

en: eemma vignette script

en: An R script for the vignettes (simple data analysis demonstrations) shown in the user's guide

mimetype: application/octet-stream

en: An R script that performs ensemble end-member mixing analysis

en: eemma user's guide

media_type: application/pdf

en: A brief user's guide to EEMMA, with illustrations using a simple data set

format: PDF

mimetype: application/pdf

en: vignette data

media_type: text/plain

en: A simple data set for the vignette script

format: TXT

mimetype: text/plain

en:
The R script eemma.R, which implements Ensemble End-Member Mixing Analysis (EEMMA) to estimate source fractions in mixtures, exploiting information contained in time-series correlations among tracer time series.

A brief user's guide, a demonstration script, and a demonstration data set are also provided, to accompany Kirchner, J.W., Mixing models with multiple, overlapping, or incomplete end-members, quantified using time series of a single tracer, Geophysical Research Letters, 2023.

The user's guide is available for public use under Creative Commons CC-BY-SA. Public use of the scripts is permitted under GNU General Public License 3 (GPL3); for details see https://www.gnu.org/licenses/

eemma

display_name: eemma

emma

display_name: emma

end-member-mixing-analysis

display_name: end-member-mixing-analysis

mixing-models

display_name: mixing-models

stable-isotopes

display_name: stable-isotopes

tracers

display_name: tracers

en: eemma.R, an R script for Ensemble End-Member Mixing Analysis


maintainer: Lyu

en: pinales fagales species-richness species-occurrence species-distribution-model species-range-map

en: Species range maps of species in Fagales and Pinales (with enough occurrences)

en: species_map.zip includes species 1690 range maps generated based on the integrated method described in Lyu et al., (2022). File names with (polygon) indicate that this map is only generated by polygon mapping, as there are not enough occurrences for SDMs.

en: Occurrence maps for species of Fagales and Pinales with few records

en: Point_buffer.zip includes 267 occurrence maps of species that do not have enough occurrence data for polygon mapping.

en:
This database contains 1957 distribution maps of species from Fagales and Pinales constructed based on a method integrating polygon mapping and SDMs (Lyu et al., 2022).
To construct the maps, we first collected occurrence data from 48 different sources. According to the number of occurrences after data cleaning, three kinds of maps are constructed: (1) For species with more than 20 occurrences, we performed SDM and polygon mapping described in Lyu et al. (2022) and select the integration of the two layers as the distribution range; (2) For species with more than 4 but less than 20 occurrences, we only use polygon mapping to draw the distribution range; (3) For species with less than 4 occurrences, a 20-km buffer was generated around the occurrences as the distribution range. The maps were manually checked and evaluated (see Note S3 and Table S9 in Lyu et al., 2022 for details).

fagales

display_name: fagales

pinales

display_name: pinales

species-distribution-model

display_name: species-distribution-model

species-occurrence

display_name: species-occurrence

species-range-map

display_name: species-range-map

species-richness

display_name: species-richness

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Species distribution maps of Fagales and Pinales (GDPlants)


disdrometer-data-laret

maintainer: Daniel Wolfensberger

title_for_slug: disdrometer-data-laret

en: raclets visibility disdrometer precipitation hydrometeors

en: Disdrometer Data Laret

en: The zip folder contains one netCDF file per day for Laret from February 7 to March 29 2019 with a temporal resolution of 30 seconds (time in UTC). The naming convention for the files is Laret_YYYYMMDD.nc and the files include the following: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

en:
A laser optical disdrometer (Parsivel² , OTT Hydromet) was used to measure hydrometeors by extinction when passing a laser beam. The instrument can classify eight different kinds of precipitation, including rain, hail, snow, drizzle, and hybrid forms.
The dataset contains information on precipitation amount and type for the period of February 7 to March 29 2019 in Laret.

disdrometer

display_name: disdrometer

hydrometeors

display_name: hydrometeors

precipitation

display_name: precipitation

raclets

display_name: raclets

visibility

display_name: visibility


intratrait

maintainer: Christian Rixen

title_for_slug: intratrait

en: neighbour-interactions plant-traits elevation-gradient cold-adapted-plants elevation-range climate-change

en: Plant trait data along elevation gradients on mountains

en:
This data set was used to test whether species specialized to high elevations or with narrow elevational ranges show more conservative (i.e. less variable) trait responses across their elevational distribution, or in response to neighbours, than species from lower elevations or with wider elevational ranges. We did so by studying intraspecific trait variation of 66 species along 40 elevational gradients in four countries (Switzerland, Australia, New Zealand, China) in both hemispheres. As an indication of potential neighbour interactions that could drive trait variation, we also analysed plant species’ height ratio, its height relative to its nearest neighbour.
The following traits and parameters were measured and are available in this data set:
As an indication of plant stature, we measured vegetative and generative height, where vegetative height was distance from soil to highest vegetative leaf and generative height was distance to the highest point on the reproductive shoot. As a measure of reproductive investment, we noted the presence of flowers on the randomly chosen individuals (see below). As a measure of individual and genet basal area, we measured individual plant and patch diameters, in two dimensions (along the largest diameter and perpendicular to it). In clonal plant species, plant diameter was equivalent to an individual rosette, whereas patch diameter referred to the whole genet and could represent the size of a tuft, tussock or cushion. For genera with more singular growth forms (e.g., some Gentiana species) plant and patch diameter were the same. The two diameter measurements were made at right angles, allowing estimates of patch and plant areas to be calculated as an ellipse (i.e., area = 0.5 a 0.5 b Π). All traits were measured on ten randomly selected individuals per site. Flower count data was considered in a binary fashion on a per individual basis (because for some species individuals only produce one flower when flowering) so that the presence or absence of flower(s) was a nominal value between 0 and 10 for each species at each site. We then collected at least three leaves (up to 30 for small and light leaves) from each of the first three individuals selected from each species for determination of leaf dry matter content (LDMC) and specific leaf area (SLA). For calculations of LDMC and SLA, fresh leaves were scanned on a flatbed scanner to determine leaf area. Leaves were then weighed on a balance to a precision of +/- 0.001g, prior to being air dried and reweighed with a balance to a precision of +/- 0.0001g. LDMC was calculated by dividing dry leaf mass by fresh leaf mass. SLA was calculated by dividing leaf area by dry leaf mass. Additionally, within an area of 10 cm diameter around the target individual, we determined the tallest neighbouring species and measured its vegetative and generative height, and estimated the percent cover of the target species, other vegetation, rock, and bare soil.
For more details see Rixen et al. 2022, Journal of Ecology.

climate-change

display_name: climate-change

cold-adapted-plants

display_name: cold-adapted-plants

elevation-gradient

display_name: elevation-gradient

elevation-range

display_name: elevation-range

neighbour-interactions

display_name: neighbour-interactions

plant-traits

display_name: plant-traits

en: intratrait


en: ground-temperature aridity sdms soil precipitation frost-change-velocity

en: Soil clay content modified from SoilGrids

en: Soil organic carbon content modified from SoilGrids

en: Soil pH modified from SoilGrids

en: Precipitation seasonality from CHELSA

en: Mean annual temperature modified from CHELSA

en: Precipitation of driest quarter modified from CHELSA

en: Mean diurnal range modified from CHELSA

en: Frost change frequency modified from CHELSA

en: The dataset contains seven environmental layers (average annual temperature, aridity [annual precipitation divided by annual potential evapotranspiration], frost change frequency, precipitation in the driest quarter, mean diurnal temperature range, and precipitation seasonality) modified from CHELSA (https://chelsa-climate.org/) and three soil layers (soil organic matter content, pH water, and clay content) modified from SoilGrids (https://soilgrids.org/).

aridity

display_name: aridity

frost-change-velocity

display_name: frost-change-velocity

ground-temperature

display_name: ground-temperature

sdms

display_name: sdms

soil

display_name: soil

en: Environmental layers for SDM simulations (GDPlants)


maintainer: Thorsten Bartels-Rausch

en: snow cryosphere arctic sea-salt-aerosol polar antartic laboratory-study

en: Experimental Results: Uptake coefficients vs. temperature and ozone concentration

en:
* Final Data to Figure 3: Uptake coefficients as a function of temperature at 5E12 molecules per cm3 ozone concentration.
* Final Data to Figure 6: Uptake coefficients at different temperatures as a function of gas- phase ozone concentration.

The average ozone uptake coefficients of the three cycles between the bypass and the flow tube per repeat is taken as the mean uptake coefficient for each experiment. Gamma was corrected for gas phase diffusion limitation following the Cooney–Kim– Davis (CKD) method52 (see supporting material of publication for details).

mimetype: text/csv

en: Experimental results of uptake coefficient vs. temperature and ozone concentration

en:
Data to Figure 3: Measured uptake coefficients as a function of temperature at 5E12 molecules per cm3 ozone concentration.

Data to Figure 6: Measured uptake coefficients at different temperatures as a function of gas- phase ozone concentration.

en: The reaction of ozone with bromide in polar regions results in the formation of reactive bromide species with impacts on ozone budget and the oxidative capacity of the lower atmosphere. Here, we present a data investigating the temperature dependence of bromide oxidation by ozone using a coated wall flow tube reactor coated with an aqueous mixture of citric acid and sodium bromide, a proxy for sea salt aerosol in snow or the free troposphere. Thus study shows the effect of of organic species at relatively mild temperatures between the freezing point and eutectic temperature as typical for Earth's cryosphere.

antartic

display_name: antartic

arctic

display_name: arctic

cryosphere

display_name: cryosphere

laboratory-study

display_name: laboratory-study

polar

display_name: polar

sea-salt-aerosol

display_name: sea-salt-aerosol

snow

display_name: snow

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Kinetic experiments on the oxidation of bromide by ozone from 289-245 K.


bryophytes-of-europe-traits-bet-dataset

title_for_slug: bryophytes-of-europe-traits-bet-dataset

en: bioclimatic-variables iucn mosses liverworts hornworts red-list life-history-traits indicator-values

en: PDF including the (trait) explanations.

en: Text file including the BET dataset.

en: Excel file including the BET dataset and (trait) explanations.

en: The Bryophytes of Europe Traits (BET) dataset includes values for 65 biological and ecological traits and 25 bioclimatic variables for all 1816 bryophytes included in the European Red List (Hodgetts et al. 2019). The traits are compiled from several regional trait datasets and manually complemented using Floras, species-specific literature and expert knowledge. The bioclimatic variables are calculated using the European range of each species. Details regarding the trait compilation and extraction of bioclimatic variables can be found in the corresponding data paper (Van Zuijlen et al. 2023).

bioclimatic-variables

display_name: bioclimatic-variables

hornworts

display_name: hornworts

indicator-values

display_name: indicator-values

iucn

display_name: iucn

life-history-traits

display_name: life-history-traits

liverworts

display_name: liverworts

mosses

display_name: mosses

red-list

display_name: red-list


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: soil-moisture dischma-catchment meteorological-measurements meteo-station davos

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

en: IRKIS Soil moisture measurements Davos


en: arctic antarctica snow sea-salt-aerosol ice

en: Read Me

en: Description of the data tables

en: Fig 1F_2

en: Individual data to mean shown in Figure 1F

en: Code

en: Matlab code to read and plot the data

en: This table lists all data files in chronological order. "SampleTemp" refers to the reading of the PT-1000 at the side of the sample holder. "cellPressure" is the water vapour pressure during the measurements. From this, in presence of ice, the temperature of the ice sample can be calculated which is given in the column "iceTemp". "dT" is the difference, or temperature offset, between sensor's reading and the ice samples temperature. The offset is due to the sensor being mounted away from the cooled spot of the sample were it experiences heating from warmer parts of the sample holder. The off-set is used to calibrate the temperature sensor and the resulting temperature during the experiments is given in the column "temperature". "relHum" is the relative humidity above (supercooled) liquid and "concBrine" is the concentration of a NaCl solution in mol/l in equilibrium with ice at the experimental temperature. "Area" is the integrated PE signal.

en: Fig 1E

en: Data to Figure 1E

en: Fig 1F

en: Data to Figure 1F

en: Fig 1D

en: Data to Figure 1D

en: Fig 1A

en: Data Figure 1A

en: Fib 1B_3

en: Individual data to mean shown in Figure 1B

en: Fig 1B

en: Data in Figure 1B

en: Fig 1B_1

en: Fig 1F_1

en: Fig 1C

en: Data to Figure 1C

en: Table 2

en: This table lists all NEXAFS data files in chronological order with PE carbon to oxygen signal intensity ratios -from which the atomic ratio were calculated in the paper - before ("preCtoO") and after ("postCtoO") each NEXAFS measurement. Also listed is the change in Na ("lossSodi"), O ("lossOxy"), Cl ("lossChlor"), and C ("lossCarb") signal intensity after the NEXAFS measurement compared to prior to the NEXAFS measurement.

en: Laboratory experiments are presented on the phase change at the surface of sodium chloride – water mixtures at temperatures between 259 K and 240 K. High selectivity to the upper few nanometres of the frozen solution – air interface is achieved by using electron yield near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. We present the NEXAFS spectrum of the hydrohalite.

en: Data set on interfacial supercooling and the precipitation of hydrohalite in frozen NaCl solutions by X-ray absorption spectroscopy


maintainer: Dirk Nikolaus Karger

en: free-climate-data climatology temperature climate-layers bioclim climate-change climate precipitation

en: CHELSA Technical Documentation

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en: CHELSA V2.1 (current)

en: CHELSA Version 2.1 based on ERA5 forcings and CMIP6

format: GeoTIFF

en: CHELSA V1.2 (deprecated)

en: CHELSA Version 1.2 based on ERA-Interim forcings and CMIP5

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present the CHELSA (Climatologies at high resolution for the earth’s land surface areas) data of downscaled temperature and precipitation to a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperatures. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height, with a subsequent bias correction.

CHELSA data published in EnviDat includes the deprecated version 1.2 (originally published under 10.5061/dryad.kd1d4). Please use the current 2.1 version.

Paper Citation:
 > _Karger DN. et al. Climatologies at high resolution for the earth’s land surface areas, Scientific Data, 4, 170122 (2017) [doi: 10.1038/sdata.2017.122](https://doi.org/10.1038/sdata.2017.122)._

bioclim

display_name: bioclim

climate

display_name: climate

climate-change

display_name: climate-change

climate-layers

display_name: climate-layers

climatology

display_name: climatology

free-climate-data

display_name: free-climate-data

precipitation

display_name: precipitation

temperature

display_name: temperature

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: x-ray-tomography snow snow-mechanics microstructure compression-experiments

en: Snowmicroquakes Data

en: Compression experiments, X-ray images and simulation data with supplemented README file

en: README

en: README file explaining the organization of the data

en:
When snow is compressed with a certain speed, micro-snowquakes are triggered in the porous structure of bonded crystals. The present dataset covers uniaxial compression experiments of snow at different strain rates and concurrent X-ray tomography imaging documenting this feature.

The experiments were conducted in a micro-compression stage operated in the X-ray tomography scanner in the SLF cold laboratory. The dataset comprises the compression force data of 17 compression experiments, the 3D image data from 4 X-ray tomography scans and the results of numerical simulations.

compression-experiments

display_name: compression-experiments

microstructure

display_name: microstructure

snow

display_name: snow

snow-mechanics

display_name: snow-mechanics

x-ray-tomography

display_name: x-ray-tomography

en: Compressive stick slip and snow-micro-quakes


snow-drift-station-snow-and-air-data

maintainer: Benjamin Walter

title_for_slug: snow-drift-station-snow-and-air-data

en: snow-height snow-temperature temperature snow-depth snow raclets

en: Relative Humidity

en: The relative humidity (%) was measured with a Campbell CS-215 at a height of 2.2 m above ground. The time is given in UTC+1.

en: Snow Depth

en: The snow depth (cm) was measured with a Lufft SHM-31 which was mounted at 1.7 m above ground. The time is given in UTC+1.

en: Air Temperature

en: The air temperature (°C) was measured with a Campbell CS-215 which was mounted at a height of 2.2 m above ground. The time is given in UTC+1.

en: Snow Surface Temperature

en: The snow surface temperature (°C) was measured with a Campbell SI-111 at 0.7 m above ground. The time is given in UTC+1.

en: Snow and air data was monitored at Gotschnagrat (LON: 46.859 LAT: 9.849) by an infrarot radiometer (Campbell SI-111) for snow temperature (°C), a snow height sensor (Lufft SHM-31) for snow height change (cm) and a temperature and humidity sensor (Campbell CS-215) for air temperature (°C) and relative humidity (%). No filter was applied to the sensors and the smapling frequency was 1 Hz.

raclets

display_name: raclets

snow-depth

display_name: snow-depth

snow-height

display_name: snow-height

snow-temperature

display_name: snow-temperature

en: Snow Drift Station - Snow and Air Data


en: phenology budburst spongy-month chilling hatch

en: 3 R-Scripts used for the analyses of the temperature, phenology and performance/preference tests

en: Temperature data Spongy moth experiment

en:
4 files with hourly temperature recorded at the height of buds in each of the four temperature treatments:
- Winter6: greenhouse where temperature was kept >6°C over winter
- Winter10: greenhouse where temperature was kept >10°C over winter
- OTC_Ambient: Open Top Chamber at Ambient temperature
- OTC_Warm: Open Top Chamber at +3.5°C warmer temperature

en: Phenology and performance/preference tests Data

en:
-"Synchronex_Cuttings_Pheno.txt" provides the budburst date ('Stage 2') of each twig of the six studies species in the four different temperature treatments ("ambient", "a+5"=Ambient +5°C, 'Greenhouse-5'= Greenhouse at temperature >5°C, 'Greenhouse_10' = Greenhouse at temperature >10°C); 'Success' give the percentage of buds within the twig that succeeded to reach at least stage 2 during the experiment.

'Synchronex-Gypsy.txt' provides the number of eggs that have hatched at each monitoring date (Day of the year in columns); "DOY_hatch_1" corresponds to the first DOY when at least one egg has hatched; "Replicate_egg_mass" correspond to the egg mass replicate (1 to 5)

'PerformanceTest_GypsyMoth.txt' provides the biomass in mg of the caterpillars fed with fresh leaves of each tested tree species during one week. "Fresh_alive" is the biomass of only the living caterpillars after 1 week and "Freshpermoth" corresponds the weight per living caterpillar (Fresh alive/Nalive)

'PreferenceTest_All_species.txt' provides the total surface of leaf disc of each tested tree species remaining after exposing 5 caterpillars to these leaves during 24H. "Total_area" is the surface of the disc of each species measured after 24h exposed to the spongy moth first instars. For each species 'control' means the surface of the disc after 24H without any exposure to the larvae. 'EatenPercent correspond to the percentage surface loss compared to the control.

en:
The files correspond to the data and R-script used for the analyses of the following paper "Feasting on the ordinary or starving for the exceptional: phenological synchrony between spongy moth and budburst of European trees in a warmer climate" published in Ecology and Evolution by Vitasse et al. 2023.
There are three zip files corresponding to the Temperature data, phenology/preference/performance tests and R-Scripts for the analyses.

Input data:
'Synchrony_Cuttings_Pheno.txt':

budburst

display_name: budburst

chilling

display_name: chilling

hatch

display_name: hatch

phenology

display_name: phenology

spongy-month

display_name: spongy-month

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Synchrony between spongy moth hatching and leaf phenology of temperate trees


maintainer: Marco Moretti

en: pollination urban-biodiversity urbanization remote-sensing sustainability honeybees

en: Dataset 3

en: Aggregated data on number hives, beekeeping locations and ratios

en: Dataset 1

en: Dataset 1: Processed data for urban beekeeping 2012-2018

en: Dataset 2

en: Dataset 2: Processed data for modelling balance urban greenspace

en: Data on: (1) spatial distribution of urban beekeeping (number of hives and number of beekeeping locations) in 14 Swiss cities (Geneva, Lausanne, Biel, Neuchatel, Basel, Zurich, Chur, Luzern, St. Gallen, Winterthur, Bern, Lugano, Bellinzona, Thun) for the period 2012-2018; (2) aggregated data to model the sustainability of urban beekeeping.

honeybees

display_name: honeybees

pollination

display_name: pollination

remote-sensing

display_name: remote-sensing

sustainability

display_name: sustainability

urban-biodiversity

display_name: urban-biodiversity

urbanization

display_name: urbanization

en: Challenging the sustainability of urban beekeeping: evidence from Swiss cities


maintainer: Jonas Stillhard

en: primeval-beech-forest dem stand-inventory-data forest permanent-forest-plot-data fagus-sylvatica carpathian-biosphere-reserve forest-structure long-term-data-sets forest-dynamics

en: Dataset

en: Data description

en: Available online on publishers website

en:
In 2000, a permanent forest plot of 10 ha has been established in the core zone of the primeval beech forest of Uholka.
 All living and dead trees with a diameter at breast height (DBH) ≥ 60 mm were identified to species, DBH measured, stems tagged and mapped.
Since then, the plot has been remeasured in 2005, 2010, and 2015. In total, 4,820 individual trees were measured with 14,116 individual measurements throughout all four inventories.
In spring 2018, an Airborne Laser Scan was carried out, covering the Uholka‐Shyrokyi Luh forest. This data set allows us to derive a high‐resolution digital elevation model (DEM) of the plot area.
The data set allows for important insights into the development and the spatial and temporal dynamics of primeval beech forests.

carpathian-biosphere-reserve

display_name: carpathian-biosphere-reserve

dem

display_name: dem

fagus-sylvatica

display_name: fagus-sylvatica

forest

display_name: forest

forest-dynamics

display_name: forest-dynamics

forest-structure

display_name: forest-structure

long-term-data-sets

display_name: long-term-data-sets

permanent-forest-plot-data

display_name: permanent-forest-plot-data

primeval-beech-forest

display_name: primeval-beech-forest

stand-inventory-data

display_name: stand-inventory-data

en: Stand inventory data from the 10‐ha forest research plot in Uholka, Ukraine


maintainer: Rebecca Mott

en: dischmex eddy-covariance-measurements snow-patch turbulent-sensible-heat-fluxes patchy-snow-covers

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 0.7 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.5 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.2 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 3.2 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 1.7 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (DA-600, Kaijo-Denki) in 0.3 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.6 m.

en: Output explanation

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.3 m.

en: Gletschboden setup

media_type: image/png

en: Background map based on data © 2014/2016 swisstopo (JD100042)

format: PNG

mimetype: image/png

en:
This dataset contains eddy-covariance measurements in the ablation period of 2014-2016. Measurements were taken from two turbulence towers over a long-lasting snow patch, which are 5 m apart from each other (2014 and 2015). The turbulence towers were equipped with two YOUNG ultrasonic anemometers mounted 0.7 m (in 2014) and 3.3 m (in 2015) above snow-free ground, two ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) mounted at 2.6 m (in 2014) and 2.2 m (in 2015) above snow-free ground and one anemometer (DA-600, Kaijo Denki) mounted at 0.3 m above snow surface.

The measurement setup changed in 2016 and includes a measurement above the snow-free ground in upwind direction (Swiss coordinates: 790191/176689). The measurement tower is equipped with one ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 3.3 m above the snow-free ground. Additionally, one measurement tower is installed above the long-Lasting snow patch and equipped with the same setup as 2015.

Turbulence data were sampled at a frequency of 20 Hz. The processing of the data to quality controlled fluxes has been done with the Biomicrometeorology flux software (Thomas et al., 2009). The program applies plausibility tests and a despiking test after Vickers and Mahrt (1997) on the measured data. The routine further applies a time-lag correction and considers the deployment (e.g. the sonic azimuth). A frequency response correction (Moore, 1986) is done and a three-dimensional rotation is performed. Finally, quality assurance/quality control (QA/QC) flags after Foken et al., (2004) are issued and fast Fourier transform power and co-spectra are calculated. The change in snow height is considered in the post-processing for every measurement day. The turbulence data were averaged to 30 minute intervals.

dischmex

display_name: dischmex

eddy-covariance-measurements

display_name: eddy-covariance-measurements

patchy-snow-covers

display_name: patchy-snow-covers

snow-patch

display_name: snow-patch

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: DISCHMEX - Impact of extreme land-surface heterogeneity on micrometeorology over spring snow-cover


en: precipitation temperature wind-speed meteorology par swiss-forest-lab climate-change long-term meteo relative-humidity

en: Site photo of the forest station (NOB)

en: Site photo of the forest station from the side.

mimetype: image/jpeg

en: Data plot of the field station (NOF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Forest station data (NOB)

en: Data file.

en: Field station data (NOF)

en: Data plot of the forest station (NOB)

en: Site aerial photo (Novaggio)

en: Site aerial photo from both Novaggio stations. Source: Google. 2016. Site aerial photo from both Novaggio stations. Retrieved November 15, 2016, from https://www.google.ch/maps

en: Site photo of the field station (NOF)

en: Site photo of the field station from the side.

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Novaggio in Switzerland where one station is located within a natural deciduous forest stand (NOB) with Turkey oak (_Quercus cerris_; 70 yrs), sweet chestnut (_Castanea sativa_; 90 yrs) and silver birch (_Betula pendula_; 70 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Novaggio is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Novaggio, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


en: occupancy-models conservation amphibians wetlands landscape

en: Covariate data 2

en: This file contains covariate data that changes over time for 856 ponds in 21 years (long format): whether or not a pond exists in year _t_, the age of constructed ponds in year _t_, structural connectivity of the pond in year _t_.

en: Model code, description

media_type: text/html

en: This is the output of the R markdown file that provides JAGS model code and describes how to format the provided data and fit the dynamic occupancy models described in the associated publication, for a quick overview.

format: HTML

en: Readme

en: Description of methods and datasets.

en: Original raw data

en: This file contains the original raw monitoring data as provided by the canton of Aargau. Access is restricted and only considered upon request and in consultation with the canton of Aargau.

en: Covariate data 1

en: This file contains covariate data that does not change over time for 856 ponds: the region the pond is in, whether the pond is old or new (constructed since 1991), elevation, water surface area, fluctuations of the water table (yes, no), the percent forest cover in 100m radius around the pond, the area or large (>6m wide) roads in 1km radius around the pond.

en: Observation data

en: This file contains detection/non-detection data for the 12 amphibian species between 1999 and 2019 for 3 annual visits. Detectable denotes whether or not a visit j was made to pond i in year t. ObservedID gives a unique ID for the observer collecting the data during visit j to pond i in year t.

en: Model code

en: This R markdown file contains all code and descriptions necessary to load and format the provided data and to fit the dynamic occupancy models described in the associated publication, including JAGS code for the fitted models.

en:
In the canton of Aargau, hundreds of new ponds have been constructed since the 1990s to benefit declining amphibian populations. This dataset consists of monitoring data for all 12 pond-breeding amphibian species in the canton of Aargau from 1999 to 2019 in 856 ponds, and environmental variables that describe the ponds and the landscape surrounding the ponds. Species observation data is detection/non-detection data from repeat visits during survey years, during which all potentially suitable ponds in an area were surveyed. Environmental variables describing the ponds are whether the pond has been newly constructed since 1991 or not, pond age (if constructed), elevation a.s.l., the water surface area, and whether the water table fluctuates or not. Environmental variables describing the surroundings of the ponds are the percent area of forest within a circular buffer of radius 100m around the pond, the area of large (width ≥6m) roads within a circular buffer of radius 1km around the pond, and structural connectivity.

The canton of Aargau is the owner of the monitoring data; the original datafile is only disclosed upon request and in consultation with the canton of Aargau.

The edited dataset contains cleaned observation data for the 12 amphibian species, as well as compiled and edited covariate data and code to fit dynamic occupancy models.

amphibians

display_name: amphibians

conservation

display_name: conservation

landscape

display_name: landscape

occupancy-models

display_name: occupancy-models

wetlands

display_name: wetlands

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Amphibian observation and pond data (Aargau, Switzerland)


en: latent-semantic-analysis agro-food-trade food-preferences food-taste-similarity national-dishes

en: information on ingredients of national dishes

en: shows information of ingredients of all national dishes of 171 countries and their names

en: National dishes, migration data and data for bilateral food trade flows

en:
The data include information on national dishes, migration data and data for bilateral food
trade flows for 5 years as well as importer and exporter GDP, population, distance between
most populated cities, bilateral information on Preferential Trade Agreements, common
official primary langauge, common colonizer post-1945, colonial relationship for overall
171 countries. The final data set contains 145,350 observations (29,070 country pairs for
5 years)

en: dyadic food similarity measures, pairwise similarity and dissimilarity (chord diagram)

en:
The figures show the distribution of two dyadic food tastes similarity measures on the base of
the national dishes: (i) the Manhattan distance and the (ii) latent semantic analysis. The chord diagram
shows the results for country pairs with most and less similarity on basis of the LSA-approach.

en: The data described in this article were collected daily over the period 4 June 2018 to 23 August 2018 and contains information of several data sources. The database includes information on national recipes and their ingredients for 171 countries, measures for food taste similarities between all 171 countries as well as bilateral migration and agro-food trade data for 5 years. The database can be used for analyzing e.g., the relation between food preferences and international trade or food preferences and health outcomes (e.g., obesity) across countries.

agro-food-trade

display_name: agro-food-trade

food-preferences

display_name: food-preferences

food-taste-similarity

display_name: food-taste-similarity

latent-semantic-analysis

display_name: latent-semantic-analysis

national-dishes

display_name: national-dishes

en: Data of national dishes, their similarity and trade flows


en: glaciers last-glacial-maximum precipitation air-temperature paleo-climate orography

en: Technical documentation

en: Technical documentation containing file metadata and variable descriptions.

en: Data Access via S3

en:
High resolution, downscaled climate model data are used in a wide variety of applications in environmental sciences. Here we present the CHELSA-TraCE21k downscaling algorithm to create global monthly climatologies for temperature and precipitation at 30 arcsec spatial resolution in 100 year time steps for the last 21,000 years. Paleo orography at high spatial resolution and at each timestep is created by combining high resolution information on glacial cover from current and Last Glacial Maximum (LGM) glacier databases with the interpolation of a dynamic ice sheet model (ICE6G) and a coupling to mean annual temperatures from CCSM3-TraCE21k. Based on the reconstructed paleo orography, mean annual temperature and precipitation was downscaled using the CHELSA V1.2 algorithm.

The data is published under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

glaciers

display_name: glaciers

last-glacial-maximum

display_name: last-glacial-maximum

orography

display_name: orography

paleo-climate

display_name: paleo-climate

en: CHELSA-TraCE21k: Downscaled transient temperature and precipitation data since the last glacial maximum


en: dust snow particles deposition hill turbulence atmosphere

en: preferential deposition patterns of all simulations performed

en: The data consist of matlab files. Each files contains a 2D array with the values of deposition at the surface nodes. Each array has Nx x Ny values. Please refer to the original paper for additional information on the spatial resolution and grid size.

en:
Preferential deposition of snow and dust over complex terrain is responsible for a wide range of environmental processes, and accounts for a significant source of uncertainty in surface mass balances of cold and arid regions. Despite the growing body of literature on the subject, previous studies reported contradictory results on the location and magnitude of deposition maxima and minima. This study aims at unraveling the governing processes of preferential deposition in neutrally stable atmosphere and to reconcile seemingly inconsistent results of previous works. For this purpose, a comprehensive modeling approach is developed, based on large eddy simulations of the turbulent airflow, Lagrangian stochastic model of particle trajectories, and immersed-boundary method to represent the underlying topography. The model performance is tested against wind tunnel measurements of dust deposition around isolated and sequential hills. A scale analysis is then performed to investigate the dependence of snowfall deposition on the particle Froude and Stokes numbers, which fully account for the governing processes of inertia, flow advection, and gravity. Additional simulations are performed, to test whether the often used assumption of inertialess particles yields accurate deposition patterns. We finally show that our scale analysis provides qualitatively similar results for hills with different aspect ratios.

This dataset contains the results of the LES-LSM model. Each Matlab file contains a 2D array of deposition values (in kg/m2) in each surface node (ix, iy) of the Cartesian grid. The file names are consistent with the simulation numbers listed in the original paper. For additional information, please refer to "Preferential deposition of snow and dust over hills: governing processes and relevant scales" by F. Comola, M. G. Giometto, S. T. Salesky, M. B. Parlange, and M. Lehning, Journal of Geophysical Research: Atmospheres, 2019.

atmosphere

display_name: atmosphere

deposition

display_name: deposition

dust

display_name: dust

hill

display_name: hill

particles

display_name: particles

snow

display_name: snow

turbulence

display_name: turbulence

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: fraxinus defense-chemistry ash-dieback intraspecific-variation cross-resistance emerald-ash-borer invasive-species

en: Raw data-Publication cross-resistance in ash-New Phytologist

en:
What are the research data files about: Raw data on perfomance (dry weight, development and mortality) of emerald ash borer larvae used in published bioassays. Raw data on ash dieback leasion lenghts. Raw data on untargeted and targeted specialized ash metabolites.
Which methods were used: Bioassays in greenhouses and climate chambers to collect data on emerald ash borer and ash dieback perfomance. Phytochemical analyses on ash phloem for quantifiying specialized metabolites
When and where was the data created / extracted: Summer 2020-2021

en:
 What are the research data files about: Raw data on perfomance (dry weight, development and mortality) of emerald ash borer larvae used in published bioassays. Raw data on ash dieback leasion lenghts. Raw data on untargeted and targeted specialized ash metabolites.

Which methods were used: Bioassays in greenhouses and climate chambers to collect data on emerald ash borer and ash dieback perfomance. Phytochemical analyses on ash phloem for quantifiying specialized metabolites.

When and where was the data created / extracted: Summer 2020-2021

ash-dieback

display_name: ash-dieback

cross-resistance

display_name: cross-resistance

defense-chemistry

display_name: defense-chemistry

emerald-ash-borer

display_name: emerald-ash-borer

fraxinus

display_name: fraxinus

intraspecific-variation

display_name: intraspecific-variation

invasive-species

display_name: invasive-species

en: Raw data-Publication cross-resistance in ash - New Phytologist


maintainer: Frank Techel

en: norway extended-column-test avalanche-observations avalanche-danger switzerland rutschblock-test

en: Rutschblock data (Switzerland)

en: avalanche occurrence data (Norway, Sitzerland) - avalanche sizes per day and warning region

en: avalanche occurrence data (Norway, Sitzerland) - largest avalanche size per day and warning region

en: ECT data (Norway, Switzerland)

en:
Observational data used to quantitatively describe the key elements describing avalanche danger: snowpack stability, the frequency distribution of snowpack stability, and avalanche size.
The data set consists of
- Rutschblock test results (Switzerland)
- Extended Column Test results (Switzerland, Norway)
- Avalanche occurrence data (Switzerland, Norway).
The data were extracted from the respective operational databases of the national avalanche warning services in Switzerland (WSL Institute for Snow and Avalanche Research SLF Davos, Switzerland) and Norway (The Norwegian Water Resources and Energy Directorate NVE).
For further information regarding the data, please refer to the publication or contact the author.

avalanche-danger

display_name: avalanche-danger

avalanche-observations

display_name: avalanche-observations

extended-column-test

display_name: extended-column-test

norway

display_name: norway

rutschblock-test

display_name: rutschblock-test

switzerland

display_name: switzerland

en: Stability tests, avalanche observations, Switzerland, Norway


maintainer: Océane Hames

en: arctic-sea-ice snow-transport mosaic snow-deposition openfoam

en: snowBedFoam 1.0.

en:
OpenFOAM-2.3.0. scripts containing the implemented Eulerian-Lagrangian snow transport model.

The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en: Paper Draft

en: This is the initial draft of the paper where the snowBedFoam 1.0. results are tested against Terrestrial Laser Scan (TLS) measurements of snow dynamics on Arctic sea ice (MOSAiC expedition). It highlights the numerical limitations of our model as well as the measurement uncertainties, which may occur in such extreme environments.

en: MOSAiC Met City preliminary (Level 2) wind data

en:
Extract from the preliminary MOSAiC atmospheric data (Level 2) for the time period 6th to 13th of November, 2019.
This data was used to set up the fluid forcing parameters in the snowBedFoam simulations on MOSAiC sea ice. It is being published in this repository with the kind permission from Matthew Shupe and his team.
The final processed and quality controlled version of this dataset (Level 3) has not been published yet. A complete reference will be added in this description once it is released.

en:
snowBedFoam 1.0. is a snow transport solver implemented in the Computational Fluid Dynamics (CFD) software OpenFOAM. It is adapted from the standard multi-phase flow solver DPMFoam for application in snow-influenced environments.

To simulate aeolian snow transport, snowBedFoam 1.0. handles coupled Eulerian–Lagrangian phases, which involve a finite number of particles (snow) spread in a continuous phase (air). The snow erosion and deposition are modelled through physically-based equations such as the ones employed in the well-established LES-Lagrangian Stochastic Model (Comola and Lehning, 2017 ; Sharma et al., 2018). This modelling approach is computationally intensive and thus adapted to simulate snow movement and distribution on small scale terrain.

snowBedFoam 1.0. was tested against topographical data collected on Arctic sea ice during the MOSAiC expedition (Clemens-Sewall, 2021) . Together with atmospheric data from the MOSAiC Met City (Shupe et al., 2021) used for the fluid forcing, the model was able to accurately simulate the zones of erosion and deposition of snow along a complex ice ridge structure.

The core code of snowBedFoam 1.0. is also accessible on the WSL/SLF GitLab repository (more details in the Resources section).

arctic-sea-ice

display_name: arctic-sea-ice

mosaic

display_name: mosaic

openfoam

display_name: openfoam

snow-deposition

display_name: snow-deposition

snow-transport

display_name: snow-transport

en: snowBedFoam: an OpenFOAM Eulerian-Lagrangian solver for modelling snow transport


maintainer: Henning Löwe

en: grain-shape granular-snow fast-sintering discrete-element-modelling angle-of-repose

en: Angle of repose and 3D CT images

en:
5 Snow types were examined and glass beads as a cohesion-less reference, named as follows:

RG: rounded grains (sieved with 0.7 - 1.4 mm)

FC: faceted grains (1.4 - 2 mm)

FCS: small faceted grains (0.7 - 1.4 mm)

IB: ice beads (4 mm)

IBS: small ice beads (2 - 2.2 mm)

GB: glass beads(2 mm)

en:
Angle of repose experiments were performed with different snow types at temperatures between -2 and -40°C. They were used to examine granular snow dynamics on the grain-scale with focus on the role of grain shape and cohesion. The angle of repose was observed by sieving snow onto a round, freestanding base until a stationary heap was formed.

This dataset consists of 1) the images of the experimental heaps that were taken to determine the angle of repose, 2) one binary 3D micro computed tomography image of each snow type. The CT images were taken with the SLF micro-CT40 to characterize snow properties and grain shape.

The experiments with natural snow types (rounded and faceted grains) and spherical model snow allowed for an examination of the differences in granular properties between natural grain shapes and spherical particles in view of Discrete Element Modelling. With the chosen temperatures, the effect of sintering could be observed that increases the angle of repose with increasing temperature.

angle-of-repose

display_name: angle-of-repose

discrete-element-modelling

display_name: discrete-element-modelling

fast-sintering

display_name: fast-sintering

grain-shape

display_name: grain-shape

granular-snow

display_name: granular-snow

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Angle of repose experiments with natural and spherical snow


aerosol-data-davos-wolfgang

title_for_slug: aerosol-data-davos-wolfgang

en: raclets ice-nucleation particles drincz inp aerosol

en: OPC GT-526S Dataset Davos Wolfgang

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en: OPC-N3 Dataset Davos Wolfgang

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: SMPS Dataset Davos Wolfgang

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity), in a temporal resolution of 2 minutes, with time in UTC, measured at Davos Wolfgang.

mimetype: application/x-netcdf

en: APS Dataset Davos Wolfgang

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Davos Wolfgang.

en: DRINCZ Dataset Davos Wolfgang

en: The DRINCZ file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs) and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3788 , TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and DRINCZ: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l minˉ¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the DRoplet Ice Nuclei Counter Zurich (DRINCZ, ETH Zurich) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

drincz

display_name: drincz

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

particles

display_name: particles

raclets

display_name: raclets

en: Aerosol Data Davos Wolfgang


en: hazard-mapping snow avalanche natural-hazard satellite

en: SPOT6 Avalanche outlines 24 January 2018

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset.

en:
Outlines of 18'737 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 24 January 2018. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

Abstract.
Accurate and timely information on avalanche occurrence are key for avalanche warning, crisis management and avalanche documentation. Today such information is mainly available at isolated locations provided by observers in the field. The achieved reliability considering accuracy, completeness and reliability of the reported avalanche events is limited. In this study we present the spatial continuous mapping of a large avalanche period in January 2018 covering the majority of the Swiss Alps (12’500 km2).

We tested different satellite sensors available for rapid mapping during a first avalanche period. Based on these experiences, we tasked SPOT6/7 data for data acquisition to cover the second, much larger avalanche period. We manually mapped the outlines of 18’737 individual avalanche events, applying image enhancement techniques to analyze regions in cast shadow as well as brightly illuminated ones. The resulting dataset of mapped avalanche outlines, having a unique completeness and reliability, is evaluated to produce maps of avalanche occurrence and avalanche size. We validated the mapping of the avalanche outlines using photographs acquired from helicopters just after the avalanche period.

This study demonstrates the applicability of optical, very high spatial resolution satellite data to map an exceptional avalanche period with very high completeness, accuracy and reliability over a large region. The generated avalanche data is of great value to validate avalanche bulletins, complete existing avalanche databases and for research applications by enabling meaningful statistics on important avalanche parameters.

Koordinate System: CH1903+ LV95 LN02

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow

educ

en: Education, culture and sport