en: modeling statistical-model land-use urbanization land-use-change landscape-services switzerland

en: Data for Assessing potential landscape service trade-offs driven by urbanization in Switzerland

en:
The provided folder structure follows the set up of the scripts.
Data is only provided when it has been fully produced by us, otherwise dummies are given.
For data that will be produced by one of the scripts, no dummies are given.
The folders may contain sub-folders, which would be filled if the scripts were all run

 00_Analysis_Data
Data produced throughout the process of the calibration and projection that is later needed for analysis

 01_Raw_Data
Primary data from external sources that were used to compile the rasters and numbers used during the calibration and projection of landscape transitions as well as service calculation

 02_Prepared_Data
Data that will be prepared for further use by scripts are put in here
Additionally it contains the parameter sheets for the transition predictors that we compiled

 03_Model_Data
 Model outputs
Folder were the projection models statistics will be saved
 Models
Folder into which the actual transition models will be saved
 Residuals
Folder into which data on models residuals will be saved for future use

 04_Projected_Data
The output of the projections will be saved into this folder

 05_Service_Data
Any service calculations will be saved in here

 06_Results_Analysis
Any Analysis plots and tables as well as intermediate data will be saved here in the respective sub-folder

en: Scripts for Assessing potential landscape service trade-offs driven by urbanization in Switzerland

en:
Scripts ordered by their main purpose within sequential folders in this ReadMe marked with

Within the folders the capital letters refer to the parallel or sequential use of the scripts; scripts here in ReadMe are marked with

 00_Function Scripts
 Functions.r
Script containing several functions for analyzing statistical models: cohen.kappa, meva.table, D2, max-Tss, plot-TSS

 Service_functions.R
Script containing functions for calculating all services and returning sums (and median for bd and rec) as well as rasters

 01_Data Preparation
 A_AS_raster_preparation.R
Preparation of the land use rasters for the years 1985, 1997, and 2009 based on the original Arealstatistik (AS/ASCH); Assigning our categories and assining new values to all "construction sites" for calibrating the models
For model projection starting point (2009) and for service calculations (all ASCH years) the "other" categories were assigned to the land use categories based on dominant neighbor, so that there were no empty cells
Creation of water & mountainous area raster that stayed stable throughout the projections
Creation of MFH raster (2009), to have as base for all new projection years, as this category never becames any other

 B_Factors_preparation.R
Preparation of the factor rasters that were used to calculate service values per cell (see Table 2): LWfactor, Transportation, Vol, Rivers, Lakes, slope, TWW, Hazard_risk

 B_Predictors_preparation.R
Preparation of the raster of the predictors used for calibrating (ASCH years) and projecting (stable) the transition models that do not depend on the land use categories: Temperature (ASCH years), solar radiation (stable), Public transportation access (stable), Elevation (stable), Workers density (ASCH years), Population change (ASCH transitions)

 B_Regions_preparation.R
Preparation of bioregions as raster to be used to mask asxxxx later to calculated services and land use area just for one region

 C_Pred_proj.R
Projecting the dynamic predictors into the future for projecting the land use transitions with the model: Linear extrapolations for workers densities and population; more detailed extrapolation of temperature (based on data for all stations that matched between the temp table we used for the calibration period and the projections from CS2M, and then making a spatial interpolation for all years based on the interpolation of temperature for all years per station)

 02_Model calibration
 A_Bioreg_pred_corr.R
Calculating correlation between the predictors for each bioregion and land use category, Output are those with too high correlation so that one predictor can be removed from transitions were both predictors occur

 A_trans_numbers_bioreg.R
Calculate transition numbers for each bioregion to decide which transitions to primarily consider

 B_Bioreg_ext_eval.R
Calculating TSS based on the external evaluation for the bioregion transitions that happened often enough to try to model them (calibration data: 85-97, evaluation data: 97-09)

 B_Bioreg_int_eval.R
Calculating TSS based on the internal evaluation for the bioregion transitions that happened often enough to try to model them (calibration data: 70%, evaluation data: 30%)

 C_Bioreg_TSS_analysis.R
Extracting TSS numbers from internal and external evaluation, calculating mean and median for each transition for each region for each evaluation method and saving as csv per region to be able to select only the transitions with high enough model performance

 D_Bioreg_Models_for_prediction.R
Calibration of the models that were then used to project land use transitions into the future; calibrated separately for each bioregion

 E_Residuals_trans_models.R
Calculation of Moran's I statistics to analyze the residuals of the land use transition models

 03_Projections
 A_Bioreg_Projections_run.R
Master script for: Extrapolaitng into the future with the regional models and then assembling for each time step to calculate new AS predictors; Several Outputs: txt file to test for NAs in Predictors, txt file with random seed number for sampling, txt file with times for calculation steps (check progress of script while running), csv sheet with projected transition frequencies, tif-rasters for every region and time step, pdf with raster plot for every region and time step

 04_Service calculation
 A_Bioreg_as_services.R
Calculate services per bioregion for years 1985, 1997, 2009

 A_Service_calculation_bioregions.R
Extracting service numbers(sums) per bioregions for all projection runs and storing them in a list of matrixes to be available for further plotting; can be run for swiss wide projections or regional ones

 05_Analysis
 A_Bioreg_ASCH_development.R
Extracting the occurrence of each category per region for all runs (first part), then for ASCH years, and then plotting them nicely; only works for regional projections

 A_Bioreg_Predictors_importanceD2.R
Calculating D2 for each transition and each considered predictor from bivariate models to get value of importance

 B_Bioreg_Pred_imp_analysis.R
Using calculated D2 to sort Predictors according to their importance for each transition

 A_Bioreg_Spatial_results_analysis.R
Plotting randomly sampled runs for ASCH and services to analyses their spatial development

 A_Bioreg_Transition_numbers_check_v1.R
Analyzing the frequency for all transitions for all regions and producing the point plots for each transition separately

 A_Bioreg_Transition_numbers_check_v2.R
Analyzing percentage and numbers of all transitions but plotting them per region and originating ASCH category

 B_Transition_Analysis.R
Further Analysis of transition numbers

 A_Service_analysis.R
Plotting of the service development for bioregions in several ways for analyzing

en:
Data and scripts of publication:

Madleina Gerecke, Oskar Hagen, Janine Bolliger, Anna M. Hersperger, Felix Kienast, Bronwyn Price, Loïc Pellissier (2019) Assessing potential landscape service trade-offs driven by urbanization in Switzerland. Palgrave communications.

Contains land use projections for Switzerland and scripts and data for these projections as well as the calculation of landscape services.

Data Folder:
Contains sub-folder with the data necessary for this study (provided were no copyright issues, otherwise placeholders with descriptions), and folders where produced data may be stored

Scripts Folder:
Contains scripts organized into subfolders depending on their purpose

Note: Some abbreviations within the scripts and data are derived from German words and not English.

land-use

display_name: land-use

land-use-change

display_name: land-use-change

landscape-services

display_name: landscape-services

modeling

display_name: modeling

statistical-model

display_name: statistical-model

switzerland

display_name: switzerland

urbanization

display_name: urbanization

en: Land use projections and services for Switzerland


maintainer: EnviDat Support

en: drought natural-hazards compound-events extreme-events forest-fire protection-forest bark-beetles protective-effect

state: active

type: dataset

en:
This file contains the anonymous answers to the survey for the case study in the protective forest, Val Mesolcina, GR, Switzerland within the BAFU Project "Wenn Risiken kumulieren - Analyse und Umgang mit unerwarteten Ereignissen und kombinierten Risiken".
The survey consists of two parts, based on different concepts: "top-down" and "bottom-up". Answers for both concepts are available in two different worksheets within the Excel file.

format: XLS

media_type: application/pdf

en: Factsheet summarising the methods used in this project (in German).

format: PDF

mimetype: application/pdf

en: Description of the study site, extreme event (trigger event) and informations about the survey.

en: Factsheet summarising the key results of the study (in French).

en: Factsheet summarising the key results of the study (in German).

en: Factsheet summarising the key results of the study (in Italian).

en: Case study website

media_type: text/html

en: Page of the case study on the project website. It includes figures fo all questions of the survey and additional synthesis graphs.

format: HTML

en: Conclusions and recommendations of the project (in German).

en:
This dataset contains the results of a case study analysing the potential impacts of a compound meteorological extreme event on the protective forest in the Val Mesolcina. These impacts were assessed in an experts survey. 29 Experts from practice, administration and science estimated the probabilities for a loss of the protective function due to a drought-related compound extreme event based on different hazard scenarios. The experts not only assessed these probabilities but also provided estimates about the reliability of the scenarios, other socio-economic consequences and options for adaptation.
This dataset contains the following information:
- Table with all (anonymised) answers from the survey
- Factsheets summarising the results and methods in German, French and Italian
- A detailed description of the study site and survey instructions
- Link to the project website wit illustrations for each individual question of the survey

bark-beetles

display_name: bark-beetles

compound-events

display_name: compound-events

drought

display_name: drought

extreme-events

display_name: extreme-events

forest-fire

display_name: forest-fire

natural-hazards

display_name: natural-hazards

protection-forest

display_name: protection-forest

protective-effect

display_name: protective-effect

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Experts survey protective forest and combined extremes in Val Mesolcina


en: development-priorities strategic-plans spatial-information urban-region europe

en: Planning intentios

format: SERVICE

en:
The present dataset is part of the report titled Gradinaru S.R., Hersperger A.M., Schmid F. (2021). Deriving Planning Intentions from written planning documents. Report on CONCUR Project- From plans to land change: how strategic spatial planning contributes to the development of urban regions.
The data corresponds to the data collected as part of the DPI Method for deriving all PIs contained in a plan (open coding) as detailed in section 4 of the report. The method involved reading the plans to break down of information in meaningful discrete “incidents” or planning intentions. To identify the planning intentions, the starting points were represented by a) the structuring of the plans in chapters and sub chapters and b) the themes that the plans addressed. Thus, the collected information was not grouped according to pre-defined categories of planning intentions, but rather put together as a list of intentions as revealed by each plan. As a result, we provide, for each case study, a document (named [Urban region name] PI as defined in the plan) which contains:
	Date when the information was filled in.
	Name of the urban region and analysed strategic spatial plan .
	A list of all planning intentions contained in a plan, with each PI being addresses as follows:
	Name of PI as it appears in the plan
	Translated name of the PI (i.e. short name for easy understanding of the meaning)
	Explanation regarding the meaning of the PI
	Why the PI is considered a priority for the urban region
	Spatial information on the PI (text and cartographic representations).
In total, 14 documents are available, one for each case study. Documents contain up to 20 pages of information extracted from the plans together with explanations and notes taken during plan reading.

development-priorities

display_name: development-priorities

europe

display_name: europe

spatial-information

display_name: spatial-information

strategic-plans

display_name: strategic-plans

urban-region

display_name: urban-region

en: Planning intentions in strategic plans of European urban regions


en: swiss-geodata qgis-plugin wms-data digital-elevation-model geoinformation-system digital-planning cable-yarding open-source seilaplan

en: WMS-Layer als Hintergrundkarten laden

en: View video on youtube!

en:
In order to digitally plan a cable line using the QGIS plugin ‘Seilaplan’, maps with various background information are helpful. In this tutorial we show you how to obtain maps that are helpful for cable line planning, for example a national map of Switzerland at different scales, the NFI vegetation height model or the NFI forest mix rate. For this we explain what WMS datasets are and how to integrate them into QGIS. No download of large data is needed for this, only a good internet connection. Please note that the tutorial language is German!

Link for the integration of WMS data: https://wms.geo.admin.ch/

Link to the description on the Swisstopo website:
https://www.geo.admin.ch/en/geo-services/geo-services/portrayal-services-web-mapping/web-map-services-wms.html

Link to the Seilaplan website: https://seilaplan.wsl.ch

**************************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung sind verschiedene Hintergrundkarten hilfreich. In diesem Tutorialvideo zeigen wir, was WMS Daten sind und wie man diese in QGIS einbinden kann. Dafür müssen die Daten nicht heruntergeladen werden. Es braucht lediglich eine gute Internetverbindung. Für die Seillinienplanung hilfreiche Karten sind bspw. die Landeskarte der Schweiz in verschiedenen Massstäben, das Vegetationshöhenmodell LFI oder der Waldmischungsgrad LFI.

Link zur Einbindung der WMS Daten: https://wms.geo.admin.ch/

Link zur Beschreibung auf der Swisstopo Webseite: https://www.geo.admin.ch/de/geo-dienstleistungen/geodienste/darstellungsdienste-webmapping-webgis-anwendungen/web-map-services-wms.html

Link zur Seilaplan-Website: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geodata

display_name: swiss-geodata

wms-data

display_name: wms-data

en: Seilaplan Tutorial: Load WMS layers as background maps


en: griesgletscher alps gletscher drone dem orthophoto orthoimage findelengletscher dsm glacier sankt-annafirn uav

media_type: application/zip

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 28th of September 2015.

format: ZIP

mimetype: application/zip

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 15th of September 2015.

en: This .pdf contains an orthoimage for each dataset as well as a Table which displays the number of flights made, image acquired, number of GCP set and the total area covered.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 19th of April 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 22th of September 2016.

en: Bulk Data Access

en: Link to the S3 bucket where all the data resources can be downloaded in bulk

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 13th of September 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 3rd of August 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 30th of August 2016.

en: This folder contains all UAV flights paths that we created for the Sankt Annafirn, the Findelengletscher and Griesgletscher. They have been created with the software eMotion2, that was developped for the eBee platform from Sensefly.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 09th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of July 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 2nd of July 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 21th of July 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 26th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 15th of August 2015.

en:
 UAV-derived DSMs and orthoimages

Unmanned Aerial Vehicle (UAV) surveys were conducted between 2015 and 2016 on the Sankt Annafirn, Findelen- and Griesgletscher, situated in the Swiss Alps. Three surveys at the Sankt Annafirn allowed for a full glacier coverage, four surveys at Griesgletscher allowed an almost full glacier coverage and seven surveys at Findelengletscher allowed for a partial coverage of the glacier tongue (see individual datasets for exact extent). For each survey, a high resolution orthoimage and a Digital Surface Model (DSM) was created.

 UAV surveys:

Prior flight, Ground Control Points (GCPs) were deployed on the glacier surface and measured with a differential GPS (Trimble R7 or Leica GPS 1200). They allowed precise georeferencing of the UAV-derived datasets. UAV flight plans were planned with the software *eMotion 2* and a SenseFly eBee was used as surveying platform. The images were then processed with the software Agisoft Photoscan Pro 1.1.6 .

The location and dates of each survey can be found in the table together with the number of flights performed (Nflights), the number of acquired images (Nimages), the number of GCPs set (NGCPs) and the surveyed area.

A folder for each dataset is available (see folder name in table), which contains:

- An orthoimage *glacier_date_photoscan_oi_CH1903+_LV95_0.1m.tif*

- A Digital Surface Model *glacier_date_photoscan_dsm_CH1903+_LV95_0.1m.tif*

- The Agisoft Photoscan automatic processing report  *glacier_date_photoscan_report.pdf*

where:

- *glacier* is the name of the surveyed glacier

- *date* is the date of the UAV image acquisition

- *photoscan* is the name of the photogrammetric software

- *oi* or *dsm* the type of dataset

- *CH1903+_LV95* is the coordinate system and datum of the dataset

- *0.1m* is the resolution of the dataset in meter

- *.tif* is the extention of the dataset

Details about the UAV surveys, the image processing and the accuracy of the UAV-derived products can be found in this publication below.

Paper Citation:
 > _Gindraux et al. 2017. Accuracy Assessment of Digital Surface Models from Unmanned Aerial Vehicles’Imagery on Glaciers, Remote Sensing, 9, 186, 1-15, [doi: 10.3390/rs9020186](https://doi.org/10.3390/rs9020186)._

The folder UAV_flight_paths.zip contains all UAV flights performed on the Sankt Annafirn, Findelengletscher and Griesgletscher. The flights were planned with the software eMotion2 and have the .afp extention.

alps

display_name: alps

dem

display_name: dem

drone

display_name: drone

dsm

display_name: dsm

findelengletscher

display_name: findelengletscher

glacier

display_name: glacier

gletscher

display_name: gletscher

griesgletscher

display_name: griesgletscher

orthoimage

display_name: orthoimage

orthophoto

display_name: orthophoto

sankt-annafirn

display_name: sankt-annafirn

uav

display_name: uav

en: UAV-derived Digital Surface Models and orthoimages for three alpine glaciers


maintainer: M. Carol Resch

en: long-term-experiment diversity nematodes restoration vegetation grassland topsoil-removal

en: Coordinates of one research plot were wrong. This was corrected in the current version of the file.

en: Nematode families

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

column 3-41: Nematode abundance (individuals per 100g dry soil) per family; nomenclature according to Bongers 1988

en: Nemadotes and vegetation

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

X: X-Coordinate

Y: Y-Coordinate

Ri.veg: Total number of plant species

Div.veg: Shannon diversity of plant species

Ri.nem: Total number of nematode families

Div.nem: Shannon diversity of nematode families

abund: Total nematode abundance (individuals per 100g dry soil)

MI: Maturity index according to Bongers 1990; calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

PPI: Plant parasite index according to Bongers 1990; calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

PPI.MI: Plant parasite to Maturity index according to Bongers, van der Meulen, & Korthals 1997; calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

CI: Channel index according to Ferris, Bongers, & de Goede 2001 (%); calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

EI: Enrichment index according to Ferris, Bongers, & de Goede 2001 (%); calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

SI: Structure index according to Ferris, Bongers, & de Goede 2001 (%); calculations done in online tool NINJA (Sieriebriennikov, Ferris, & de Goede, 2014)

He.a: Herbivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

He.ecto.a: Herbivorous ectoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

He.endo.a: Herbivorous endoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ba.a: Bacterivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Fu.a: Fungivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Om.a: Omnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ca.a: Carnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Om.Ca.a	Sum of omnivorous and carnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014
CP1.a: C-P (colonizer-persister) class 1 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to enrichment indicators according to Ferris, Bongers, & de Goede 2001

CP2.a: C-P (colonizer-persister) class 2 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to stress indicators according to Ferris, Bongers, & de Goede 2001

CP3.a: C-P (colonizer-persister) class 3 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

CP4.a: C-P (colonizer-persister) class 4 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

CP5.a: C-P (colonizer-persister) class 5 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

CP3-5.a: Sum of C-P3, C-P4 and C-P5 nematode abundance (individuals per 100g dry soil) equivalent to structure indicators according to Ferris, Bongers, & de Goede 2001

protect.sp.pro: plant species categorized into species of concern based on their red list status in Switzerland as well as their protection status in Switzerland and the Canton Zurich (Moser, Gygax, Bäumler, Wyler, & Palese, 2002)

tar.sp: Number of target species (all species recorded in the eleven target plots plus propagules of species applied by hand, resulting in a total of 143 species)

Indi.moist: Plant indicator values for soil moisture according to Landolt et al. 2010

Indi.nutri: Plant indicator values for soil nutrients according to Landolt et al. 2010

Management: level of mowing and manuring frequency (35-40 kg N ha-1 application-1); intensity1 = mowing once and no manure; intensity2 = 2-3 times mowing and no manure; intensity3 = 2-3 times mowing and manuring; intensity4 = 4-5 times mowing and manuring

Tillage: last time of tillage

Land.use.history: for Initial plots = recent agricultural use; for all restored sites = agricultural use before restoration
Mowing	earliest date of biomass harvesting (excluding “Initial”) based on contracts between farmers and the Nature Protection Agency of Zurich

Soil.type: based on soil mapping survey 1991 (before restoration)

Soil.texture: determined by the sediment method (Gee & Bauder 1986) and classified into soil textural classes according to FAO (1990)

pH: soil pH (CaCl2)

Slope: slope gradient classes according to FAO (1990; %)

en: Nematode feeding types

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

He.ecto.a: Herbivorous ectoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

He.endo.a: Herbivorous endoparasite nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ba.a: Bacterivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Fu.a: Fungivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Om.a: Omnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

Ca.a: Carnivorous nematode abundance (individuals per 100g dry soil); classification according to Sieriebriennikov, Ferris, & de Goede, 2014

en: Nematode colonizer-persister classes

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

CP1.a: C-P (colonizer-persister) class 1 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to enrichment indicators according to Ferris, Bongers, & de Goede 2001
CP2.a: C-P (colonizer-persister) class 2 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990; equivalent to stress indicators according to Ferris, Bongers, & de Goede 2001
CP3.a: C-P (colonizer-persister) class 3 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990
CP4.a: C-P (colonizer-persister) class 4 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990
CP5.a: C-P (colonizer-persister) class 5 nematode abundance (individuals per 100g dry soil); C-P classification according to Bongers 1990

en: Plant community composition (plant species)

en:
Plot: Plot ID combining treatment code and plot number (in total 55 plots)

Treatment: Three restoration treatments and two reference treatments. Initial=intensively managed grasslands; Harvest only= multiple hay harvest (2-3 times) per years; Topsoil= Topsoil removal (upper 10-30 cm); Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Target= species-rich ancient grasslands

column 3-252: Plant abundance per species (in total 252 plant species) expressed as cover percentage estimation according to van der Maarel (vdM 1979; 7 classes: 1-7); nomenclature according to Lauber & Wagner (1996)

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:
 > Resch, M.C., Schütz, M., Graf, U., Wagenaar, R., van der Putten, W.H., Risch, A.C. 2019. Does topsoil removal in grassland restoration benefit both soil nematode and plant communities? Journal of Applied Ecology 56: 1782-1793.

Please cite this paper together with the citation for the datafile.

 Methods
 Study area and experimental settings
The study was conducted in a nature reserve (Eigental: 47° 27’ to 47° 29’ N, 8° 37’ E, 461 to 507 m a.s.l.) that is located on the Swiss Central plateau close to Zurich airport (Canton Zurich, Switzerland). The mean annual temperature in this area ranges from 8.9 to 10.6 °C, mean annual precipitation from 910 to 1260 mm [10-year average (2007-2017); MeteoSchweiz, 2018]. The main soil types are calcaric to gleyic Cambisol and Gleysols. The reserve was established in 1967 to protect small remnants of oligotrophic semi-natural grasslands (roughly 12 ha). The plant community can be characterized as Molinion and Mesobromion (semi-wet to semi-dry), depending on the site-specific groundwater level and slope inclination (Delarze, Gonseth, Eggenberg, & Vust, 2015). These remnants represent species-rich islands in an otherwise intensively managed agricultural landscape. Semi-natural grasslands covered an area of 60,000 ha in the Canton Zurich in 1939, however, by 2005 only roughly 600 ha remained (Baudirektion Kanton Zürich, 2007). In 1990, the government of Canton Zurich decided to enlarge the nature reserve Eigental. The goal was to incorporate eleven patches of 20 ha adjacent intensively farmed land and transform these patches into semi-natural grasslands. The patches had a different agricultural history, ranging from permanent (no tillage for >50 years) to temporary grassland (as part of crop rotation; last tillage <5 years). On all freshly integrated patches fertilization was stopped in 1992 and from then on biomass was harvested three times a year and removed. After 5 years without noticeable effects on vegetation composition, the Nature Conservation Agency of Canton Zurich decided to increase the restoration efforts. In 1995, a large-scale experiment was initialized to evaluate if certain treatments can facilitate restoration within a reasonable timeframe of 5 to 10 years after treatment implementation.
The three restoration treatments used were:
i. “Harvest only”: Plots are being mowed two to three times a year and the biomass is removed.
ii. “Topsoil”: Topsoil was removed to a depth of 10 to 20 cm, depending on the depth of the O and A horizon, in four randomly selected areas within each of the eleven patches in late autumn 1995. The size of each topsoil removal area depended on individual patch size and was between 2700 and 7000 m2.
iii. “Topsoil+Propagules”: Propagules from target vegetation were added on half of the area where topsoil was removed, using fresh, seed-containing hay originating from a mixture of semi-dry to semi-wet species-rich grasslands of local provenance (within a radius of 7 km). Hay applications were conducted twice in 1995 and 1996. Repeated applications were chosen to account for the low quantity of available plant material per transfer, since area ratio between receptor and donor sites was roughly 1:1. In addition, hand-collected propagules from 15 selected target species of regional provenance (within a radius of 30 km) were equally applied in 1996 and 1997.
“Topsoil” and “Topsoil+Propagules” plots are mowed once a year, and the biomass is removed. Mowing on these plots started five years after the treatment was implemented.
Eleven permanent plots of 5 m x 5 m were randomly established in each treatment to monitor the vegetation development. The experiment was complemented with 11 control plots that represent the initial state of intensively managed grasslands, further referred to as “Initial”, and 11 control plots that represent the targeted state of donor sites for “Topsoil+Propagules”, further referred to as “Target”. Consequently, the experiment consists of 55 plots (5 treatments x 11 replicates). Management of intensively used grasslands includes mowing and fertilizing (manure) between two to five times a year, as well as different tillage regimes (no tillage for >50 years; last time of tillage <5 years).

 Nematode and plant sampling
Soil nematodes were sampled in 2 m x 2 m plots, randomly established at least 2 m away from the vegetation plots. We collected eight soil cores with a 2.2 cm diameter soil core sampler (Giddings Machine Company, Windsor, CO, USA) to a depth of 12 cm (representing the majority of the plant rooting system) in each plot at the beginning of July 2017. The eight cores within each replicate plot were combined, gently homogenized, placed in coolers and transported to the laboratory of NIOO in Wageningen, the Netherlands, within one week. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriator (Oostenbrink, 1960) and concentrated, resulting in 6 mL nematode solution. The nematode solution was subdivided into three subsamples, two for morphological identification and quantification, and one for molecular work (not used in this study). For morphological identification and quantification, nematodes were heat-killed at 90 °C and fixed in 4 % formaldehyde solution (final volume 10 mL per subsample). All nematodes in 1 mL of formaldehyde solution were counted, and a minimum of 150 individuals per 1 mL sample (or all if less nematodes were present) were identified to family level using Bongers (1988). We then extrapolated the numbers of each nematode taxa identified to the entire sample and expressed them per 100 g dry soil for further analyses.
We calculated number of nematode taxa and Shannon diversity and assessed nematode community composition. In addition, we classified the nematode taxa into feeding types (herbivores, bacterivores, fungivores, omni-carnivores), structural and functional guilds (Table S4). Structural guilds assign nematode taxa according to life-history traits into five colonizer-persister (C-P) classes, ranging from one (early colonizers of new resources) to five (persisters in undisturbed habitats; Bongers 1990). C-P classes can be categorized as indicators for nutrient-enriched (C-P1), stressed (C-P2) and structured (C-P3 + C-P4 + C-P5) soil conditions (Ferris, Bongers, & de Goede, 2001). Functional guilds assign nematode taxa according to their C-P classification combined with their feeding habits (Ferris, Bongers, & de Goede, 2001). Based on the structural and functional guild classification we calculated five additional indices to assess soil nutrient status, disturbance and food web characteristics using NINJA (Sieriebriennikov, Ferris, & de Goede, 2014). 1) The Maturity index indicates the degree of different environmental perturbations (e.g., tillage, nutrient enrichment, pollution) and is used to monitor colonization and subsequent succession after disturbances (Bongers, 1990). 2) The ratio between the Plant Parasite (C-P of herbivorous nematodes only) to Maturity index is used to monitor the recovery of disturbed habitats incorporating information of life-history traits for all feeding types (Bongers, van der Meulen, & Korthals, 1997). 3) The Enrichment index indicates nutrient-enriched soils and agricultural management practices (Ferris, Bongers, & de Goede, 2001). 4) The Structure index provides information about the succession stage of the soil food web and therefore correlates with the degree of maturity of an ecosystem (Ferris, Bongers, & de Goede, 2001). 5) The Channel index provides information about the predominant decomposition pathways, where higher values stand for a higher proportion of energy transformed through the slow fungal decomposition channel (Ferris, Bongers, & de Goede, 2001). In addition, the Structure and Enrichment indices can be displayed in a biplot where nematode assemblages are plotted along a structure (x-axis) and enrichment (y-axis) trajectory (increasing index values). Each biplot quadrat reflects different levels of disturbance, soil nutrient pools and decomposition pathways (Ferris, Bongers, & de Goede, 2001).
The plant surveys were conducted on the 25 m2 permanent plots in June 2017. Plant species cover was visually assessed according to the semi-quantitative cover-abundance scale of Braun-Blanquet (1964; nomenclature: Lauber & Wagner, 1996). We calculated number of species and Shannon diversity, and assessed plant community composition. We also counted the number of target species (all species recorded in the eleven target plots plus propagules of species applied by hand, resulting in a total of 143 species) and categorized plant species into species of concern based on their red list status in Switzerland as well as their protection status in Switzerland and the Canton Zurich (Moser, Gygax, Bäumler, Wyler, & Palese, 2002). Furthermore, we calculated indicator values for soil moisture and soil nutrients for each species according to Landolt et al. (2010).

 References
Baudirektion Kanton Zürich (2007). 10 Jahre Naturschutz-Gesamtkonzept für den Kanton Zürich 1995-2005 – Stand der Umsetzung. Zürich: Baudirektion Kanton Zürich.
Bongers, T. (1988). De nematoden van Nederland. Utrecht: Stichting Uitgeverij Koninklijke Nederlandse Natuurhistorische Vereniging.
Bongers, T. (1990). The maturity index: an ecological measure of environmental disturbance based on nematode species composition. Oecologia, 83, 14-19. doi:10.1007/BF00324627
Bongers, T., van der Meulen, H., & Korthals, G. (1997). Inverse relationship between the nematode maturity index and plant parasite index under enriched nutrient conditions. Applied Soil Ecology, 6, 195-199. doi:10.1016/S0929-1393(96)00136-9
Braun-Blanquet, J. (1964). Pflanzensoziologie, Grundzüge der Vegetationskunde (3rd ed.). Wien: Springer.
Delarze, R., Gonseth, Y., Eggenberg, S., & Vust, M. (2015). Lebensräume der Schweiz: Ökologie - Gefährdung - Kennarten (3rd ed.). Bern: Ott.
Ferris, H., Bongers, T., & de Goede, R.G.M. (2001). A framework for soil food web diagnostics: extension of the nematode faunal analysis concept. Applied Soil Ecology, 18, 13-29. doi:10.1016/S0929-1393(01)00152-4
Landolt, E., Bäumler, B., Erhardt, A., Hegg, O., Klötzli, F., Lämmler, W., … Wohlgemuth, T. (2010). Flora indicativa. Ecological indicator values and biological attributes of the Flora of Switzerland and the Alps (2nd ed.). Bern: Haupt.
Lauber, K., & Wagner, G. (1996). Flora Helvetica. Flora der Schweiz. Bern: Haupt.
MeteoSchweiz (2018). Klimabulletin Jahr 2017, Zürich: MeteoSchweiz.
Moser, D., Gygax, A., Bäumler, B., Wyler, N., & Palese, R. (2002) Rote Liste der gefährteten Farn- und Blütenpflanzen der Schweiz. Bern: BUWAL.
Oostenbrink, M. (1960). Estimating nematode populations by some selected methods. In N.J. Sasser & W.R. Jenkins (Eds.), Nematology (pp. 85-101). Chapel Hill: University of North Carolina Press.
Sieriebriennikov, B., Ferris, H., & de Goede, R.G.M (2014). NINJA: An automated calculation system for nematode-based biological monitoring. European Journal of Soil Biology, 61, 90-93. doi:10.1016/j.ejsobi.2014.02.004

diversity

display_name: diversity

grassland

display_name: grassland

long-term-experiment

display_name: long-term-experiment

nematodes

display_name: nematodes

restoration

display_name: restoration

topsoil-removal

display_name: topsoil-removal

vegetation

display_name: vegetation

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Grassland restoration: nematodes and plant communities


maintainer: Anita C. Risch

en: global soil worldwide soil-chemistry nutrient-network grassland soil-biology mineralization

en:
site.code: Site code

Continent: Continent

sampleID: Sample ID

nn.latitude: Lattitude

nn.longitude: Longitude

bioclim.T.ann: Mean annual temperature (°C)

bioclim.T.var: Temperature variability (°C)

bioclim.T.q.wet: Temperature of the wettest quarter (°C)

bioclim.T.q.dry: Temperature of the driest quarter (°C)

bioclim.T.q.warm: Temperature of the warmest quarter (°C)

bioclim.P.ann: Mean annual preciptiation (mm)

bioclim.P.q.wet: Precipitation of the wettest quarter (mm)

ch.pH: pH

ch.WSK.vol: Water holding capacity (vol%)

ch.bulkdensity.gcm3: Bulk density (g cm-3)

ch.porespace: Pore space (vol%)

ch.sand.perc: Soil texture: sand (%)

ch.silt.perc: Soil texture: silt (%)

ch.clay.perc: Soil texture: clay (%)

ch.NO3start.mgg: NO3 at the beginning of the incubation (mgkg)

ch.Ntot.perc: Total soil N (%)

ch.Ctot.perc: Total soil C (%)

ch.Corg.perc: Soil organic C (%)

ch.netNminfield.mgkgd: Realised soil net N mineralisation (mg kg-1 d-1)

ch.netNminlab.mgkgd: Potential soil ne N mineralisation (mg kg-1 d-1)

archaea.cpg.log: Ammonia oxidising archaea (archaeal amoA gene copies g-1 soil)

bacteria.cpg.log: Ammonia oxidising bacteria (bacterial amoA gene copies g-1 soil)

micr.biom: Microbial biomass (ug g-1 soil)

ch.CtoN: C to N ratio

ch.netNnitriffield.mgkgd.sqrt: Realised soil net nitrification, transformed (mg kg-1 d-1)

ch.netNammoniffield.mgkgd.sqrt: Realised soil net ammonification, transformed (mg kg-1 d-1)

ch.netNnitriflab.mgkgd.sqrt: Potential soil net nitrification, transformed (mg kg-1 d-1)

ch.netNammoniflab.mgkgd.sqrt: Potential soil net ammonifiation, transformed (mg kg-1 d-1)

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch, A. C.; Zimmermann, S.; Ochoa-Hueso, R.; Schütz, M.; Frey, B.; Firn, J. L.; Fay, P. A.; Hagedorn, F.; Borer, E. T.; Seabloom, E. W.; et al. Soil net nitrogen mineralisation across global grasslands. Nat. Commun. 2019, 10 (1), 4981 (10 pp.). doi.org/10.1038/s41467-019-12948-2

Please cite this paper together with the citation for the datafile.

We conducted coordinated measurements of realised and potential soil net Nmin, and assessed water holding capacity, bulk density, C and N content, texture, pH, pore space, microbial biomass, and archaeal (AOA) and bacterial (AOB) ammonia oxidiser abundance using identical materials and methods across 30 grasslands on six continents. The sites covered a globally relevant range of climatic and edaphic conditions. Climate data was obtained from worldclim - Global climate data https://www.worldclim.org/

global

display_name: global

mineralization

display_name: mineralization

nutrient-network

display_name: nutrient-network

soil

display_name: soil

soil-biology

display_name: soil-biology

soil-chemistry

display_name: soil-chemistry

worldwide

display_name: worldwide


maintainer: Frank Techel

en: european-alps danger-level warning-regions avalanche-forecast snow

en: Forecast avalanche danger level

media_type: text/csv

en: contains the highest forecast danger level (dangerLevelMax) for each day and warning region

format: CSV

mimetype: text/csv

en: shape file warning regions Alps

en:
This dataset contains the data used in the publication by Techel et al., 2018 _Spatial consistency and bias in avalanche forecasts - a case study in the European Alps_ (Nat Haz Earth Syst Sci).
For details on the data please refer to this publication.
The dataset contains the following:
- shape files for the warning regions in the Alps
- highest forecast danger level for each warning region and day

avalanche-forecast

display_name: avalanche-forecast

danger-level

display_name: danger-level

european-alps

display_name: european-alps

snow

display_name: snow

warning-regions

display_name: warning-regions

en: Forecast avalanche danger level European Alps 2011 - 2015


en: soil-water-content soil-moisture landslide-early-warning soil-water-matrix-potential soil-temperature

en: In-situ soil moisture measurements, Langnau i E, 2021-2023

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each. Meteorological variables, such as air temperature or precipitation can be received from MeteoSwiss.
Time intervall: 1 hour. Measurement period: June 2021-Dec 2023.
Location: flat terrain, meadow (measurement site of MeteoSwiss)
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Napf, 2021-2023

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each. Meteorological variables such as air temperature or precipitation can be received from MeteoSwiss.
Time intervall: 1 hour.
Measurement period: June 2021-Dec 2023.
Location: flat terrain, meadow (official MeteoSwiss station)
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Wasen i.E., steep slope, 2019-2023

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, and two additional soil temperature measurements (oC), air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2019-Dec 2023.
Location: steep hillslope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: Detailed description of soil moisture measurment sites, soil properties and sensor installations (in German)

en: In-situ soil moisture measurements, Ranflüh, 2021-2023

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, as well as air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2021-Dec 2023.
Location: hillslope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Wasen i.E., flat location, 2019-2023

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, and two additional soil temperature measurements (oC), air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2019-Dec 2023.
Location: flat terrain, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Trub, 2021-2023

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, as well as air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2021-Dec 2023.
Location: slope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In the context of landslide early warning research, soil moisture (e.g. volumetric soil water content and soil water potential) has been measured at six locations in the Napf-region (Emmental, central Switzerland) since April 2019. Here, we provide the hourly mean values of all sensors from all 6 locations after a comprehensive data control, filtering and aggregation (from 10-min to 1-hour values). A sub-set of these data (for the locations Wasen i.E.) has previously been published in envidat.ch at https://www.doi.org/10.16904/envidat.369 applying the same data post-processing method. The dataset is complemented with meteorological data (locally measured air temperature and precipitation) as well as soil temperature. A detailed description of the sites and measurement installations can be found in a separate report (attached with the data).

landslide-early-warning

display_name: landslide-early-warning

soil-moisture

display_name: soil-moisture

soil-temperature

display_name: soil-temperature

soil-water-content

display_name: soil-water-content

soil-water-matrix-potential

display_name: soil-water-matrix-potential

en: In-situ soil moisture measurements Napf-region


en: biological-control pest-invasion dryocosmus-kuriphilus castanea-sativa southern-switzerland torymus-sinensis population-evolution

en:
Data has been collected from summer 2011 to 2016.

Main reasons for NA values:

-	D. kuriphilus still not arrived in the site.
-	No galls were found during the field sampling.
-	Site has not been sampled in the correspondent year because of time, weather or money constrains.
-    T. sinensis not found in the galls

Variable description:

Year = sampling year.

Coordinate, elevation, slope, aspect = average site characteristics.

ts_arrival = T. sinensis arrival year.

dk_arrival = D. kuriphilus arrival year.

dk_parasitism_by_ts = D. kuriphilus parasitism rate by T. sinensis. Formula: (no. of T. sinensis/ no. of D. kuriphilus chambers) * 100 at gall level.

dk_infestation = Percentage of attacked buds. Formula: no. of attacked buds / no. of total developed buds*100 (as presented in Kotobuki et al. 1985) at shoot level.

ts_per_bud = number of alive T. sinensis individual calculated at bud level.

dk_per_bud = number of alive D. kuriphilus individual calculated at bud level.

dk_pot_per_bud = overall number (dead and alive) D. kuriphilus individual calculated at bud level.

total_gall_nr_per_bud = average gall number per bud.

chamber_per_galls = average D. kuriphilus chamber number per gall.

For details see the submitted publication with the same name

References
Kotobuki, K., Mori, K. and Sato, Y. (1985) ‘2 methods to estimate the tree damage by chestnut gall wasp Dryocosmus-kuriphilus’, Bulletin of the fruit tree research station A (Yatabe), 2(12), pp. 29–36.

en:
This dataset contains the population evolution of a pest and its biocontrol agent in terms of presence proportion at gall level and absolute number of insects.

The study area extends from the Cuneo region (Piedmont, Italy) to southern Switzerland. In order to provide a complete range of data covering the entire process from the pest arrival to complete biological control by its natural enemy T. sinensis, a space-for-time substitution approach has been adopted so as to create a temporal gradient of the epidemic stages over the whole study area.

The southernmost Swiss sites roughly represent the arrival and establishment of the pest without the presence of the natural enemy, the central ones the early epidemic stage and the epidemic peak, whereas the northern ones the end of the epidemic with the beginning of the biocontrol. The Italian ones represent the beginning of the equilibrium between the two population as well as the situation with stable T. sinensis populations on the long term.

These data are used in the paper entitled: Torymus sinensis local and regional early population dynamics in the Insubrian and Piedmont regions

biological-control

display_name: biological-control

castanea-sativa

display_name: castanea-sativa

dryocosmus-kuriphilus

display_name: dryocosmus-kuriphilus

pest-invasion

display_name: pest-invasion

population-evolution

display_name: population-evolution

southern-switzerland

display_name: southern-switzerland

torymus-sinensis

display_name: torymus-sinensis

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: snow-profile gcos snow-height snow-water-equivalent snow

en: DATA ACCESS

en: STATION METADATA

media_type: text/plain

format: TXT

mimetype: text/plain

en:
This dataset contains long-term snow water equivalent and corresponding snow depth data 11 observer sites in Switzerland between 1200 and 2500 m a.s.l. compiled for the Global Climate Observing System (GCOS) and supported by MeteoSwiss. Snow depth (cm) and snow water equivalent (mm) are manually recorded every 2 weeks since the 1947 (depending on station). The attached metadata file gives details for each station.
The measurement series agree with GCOS objectives according to the GCOS Implementation Plan: This inlcudes:
• Raw data are archived in the snow and avalanche database at SLF.
• Measuring techniques are traceable and documented as snow depth and snow water equivalent have in general remained the same since beginning up to now. When planning new systems or changes of existing systems in the future, their impact will be assessed prior to implementation.
• Historical data of these 11 stations have been digitized and all data have been quality controlled.
• Detailed metadata (location of measurements) are available.
• Data gaps for the two most important winter and spring dates were reconstructed based on a published SWE parameterization from co-located snow depth measurements.
• Public availability of the data has been ensured by publishing the data on the Envidat portal (https://www.envidat.ch/dataset/gcos-swe-data).

gcos

display_name: gcos

snow-height

display_name: snow-height

snow-profile

display_name: snow-profile

snow-water-equivalent

display_name: snow-water-equivalent

en: GCOS SWE data from 11 stations in Switzerland


en: meteo meteorology temperature wind-speed climate-change relative-humidity precipitation long-term par swiss-forest-lab

en: Data plot of the field station (LAF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Field station data (LAF)

en: Data file.

en: Site photo of the forest station (LAB)

en: Site photo of the fforest station from the side.

mimetype: image/jpeg

en: Data plot of the forest station (LAB)

en: Site photo of the field station (LAF)

en: Site photo of the field station from the side.

en: Forest station data (LAB)

en: Site aerial photo (Lausanne)

en: Site aerial photo from both Lausanne stations. Source: Google. 2016. Site aerial photo from both Lausanne stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Lausanne in Switzerland where one station is located within a natural mixed forest stand (LAB) with European beech (_Fagus sylvatica_; 160-170 yrs), European silver fir (_Abies alba_; 160-170 yrs) and Norway spruce (_Picea abies_; 160-170 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, LAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Lausanne is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Lausanne, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


maintainer: Michael Lehning

en: alpine3d snow alpine3d-simulations snow-hydrology alpine-precipitation snow-cover snow-distribution

en: ADS datasets and simulation inputs

en: The file contains the ADS datasets of snow depth and input data used for simulations.

en:
Dataset (Model input, snow distribution and validation) for the precipitation scaling paper, which should be cited along with the data set citation.

This data is useful for distributed hydrological modelling or other tasks that involve the study of snow distribution and precipitation in the high Alpine.

The format of the data is for Alpine3D (models.slf.ch) model runs but other models could be used, too.

Please cite:

_Vögeli, C., Lehning, M., Wever, N., Bavay M., 2016: Scaling Precipitation Input to Spatially Distributed Hydrological Models by Measured Snow Distribution., Front. Earth Sci. 4: 108. doi: 10.3389/feart.2016.00108._

Dataset is provided as a single zip file.
The archive contains two directories, the valuable distributed snow depth maps for the landscape Davos and the simulation input.
The archive also contains the file: "ReadMeMetadataDataSetPrecipitationScaling" which explains the data structure.

alpine-precipitation

display_name: alpine-precipitation

snow

display_name: snow

snow-cover

display_name: snow-cover

snow-distribution

display_name: snow-distribution

snow-hydrology

display_name: snow-hydrology

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Precipitation Scaling Data Set (Vögeli et al., Frontiers)


maintainer: Giulia Francesca Azzurra Donati

en: urban-planning ecological-corridors ecosystem-services biodiversity network-analysis circuit-theory

en: Amphibian movement resistance layers and scripts for connectivity modelling - part 2

en: The zipped folder includes the script to create and analyse the networks from Circuitscape outputs. The subfolders “Boundaries”, “Layers”, and “Reference_net” contain files either called by the code or created in the process. The subfolder “Outputs_from_Circuitscape” contains the outputs from Circuitscape including node and branch cumulative currents in a network format.

en: Amphibian movement resistance layers and scripts for connectivity modeling - part 1

en: The zipped folder includes the script to aggregate the resistance layers into squared and hexagonal grids. The subfolders “Boundaries”, “Layers”, “Reference_grids”, and “Resistance_from_SDMs” contain files either called by the code or created in the process.The subfolder “Inputs_for_Circuitscape” contains the inputs to run Circuitscape, after doing some subsequent processing steps in QGIS (listed in the R script) with the files created with the script.

en: This data includes (1) Scripts to aggregate landscape resistance layers into squared and hexagonal grids (i.e., different representations and resolutions), (2) Input resistance layers and focal nodes in .txt format to run in Circuitscape (Python implementation v4.0.5). Circuitscape is a software tool for modeling and analyzing landscape connectivity, which simulates movement of organisms across landscapes by estimating resistance to movement across each point of the landscape. (3) Scripts for the ecological network analysis, and (4) environmental predictors for amphibian whole-life cycle habitats used to describe the local environment for BGI design (i.e. topographic, hydrologic, edaphic, vegetation, land-use derived, movement-ecology related).

biodiversity

display_name: biodiversity

circuit-theory

display_name: circuit-theory

ecological-corridors

display_name: ecological-corridors

ecosystem-services

display_name: ecosystem-services

network-analysis

display_name: network-analysis

urban-planning

display_name: urban-planning

en: Multi-Scale Prioritization framework for Urban Blue-Green Infrastructure Planning to Support Biodiversity: Data & Codes


maintainer: Markus Schlegel

en: environmental-dna air-sampling metabarcoding spore-dispersal monitoring

en: Data files and analysis scripts (Version 2)

en: This ZIP archive contains the data and source code necessary to reproduce the analyses for the manuscript "A case study on the application of spore sampling for the monitoring of macrofungi". Please refer to README.pdf inside the archive for more information.

en: Data files and analysis scripts (Version 1)

en: This ZIP archive contains the data and source code necessary to reproduce the analyses for the manuscript "A case study on the application of spore sampling for the monitoring of fungi". Please refer to README.pdf inside the archive for more information.

en:
Resources associated with the manuscript *A case study on the application of spore sampling for the monitoring of macrofungi* ([Schlegel et al. 2024](https://doi.org/10.1111/1755-0998.13941)).
Airborne environmental DNA (eDNA) monitoring of fungi was evaluated on a species-rich grassland site. Extensive fruiting body surveys yielded 29 waxcap and clavarioid species, 19 of which were also detectable in air eDNA. The analysis indicates that spores of locally occurring fruiting bodies were detected, in addition to a large diversity of common fungal species, while rare and threatened species were under-represented in the air.
*Version 1* of the dataset was submitted during the review phase. *Version 2* contains minor changes and clarifications, and is up to date with the [published supplement](https://onlinelibrary.wiley.com/action/downloadSupplement?doi=10.1111%2F1755-0998.13941&file=men13941-sup-0001-AppendixS1.pdf) of the study.
The contents of the ZIP archive:
* analysis scripts in [R-Markdown](https://rmarkdown.rstudio.com) format, including the rendered PDF output with figures and tables (*analysis* directory)
* eDNA sample metadata (*amplicon_meta*) and results of the amplicon clustering (*amplicon_data*) and the source code of the pipeline (*amplicon_pipeline*)
* positions of all fruiting body groups found in the surveys (3838 GPS points) (*surveys*)
* positions of the spore traps, taxonomy of studied grassland fungi and red-list species, and many more resources
Please refer to `README.pdf` inside the archive for a complete description of the file structure and information on how to reproduce the analyses.

air-sampling

display_name: air-sampling

environmental-dna

display_name: environmental-dna

metabarcoding

display_name: metabarcoding

monitoring

display_name: monitoring

spore-dispersal

display_name: spore-dispersal

en: Supporting information for case study on the application of spore sampling for the monitoring of macrofungi


sensitivity-of-modeled-snow-instability

maintainer: Bettina Richter

title_for_slug: sensitivity-of-modeled-snow-instability

en: numerical-avalanche-forecasting snowpack snow-instability global-sensitivity-analysis snow-cover-modeling

en: Reference run

en: Reference run for the sensitivity analysis at Weissfluhjoch field site for winter season 2016-2017. Meteorological data from the automatic weather stations are used. No biases were introduced to the input data.

en: Case ALL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the whole simulation period. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Manually observed snow profiles

en: Manually observed snow profiles at Weissfluhjoch field site for winter season 2016-2017, including layer depth, hand hardness, grain size and grain shape for each layer.

en: Case WL

en: Extracted output data for case ALL. Here biases were introduced to meteorological input data during the period of weak layer formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: Case SL

en: Extracted output data for case SL. Here biases were introduced to meteorological input data during the period of slab formation. Data include quasi random biases, which were introduced, extracted output of simulated snow profiles and sobol indices for each output variable.

en: We investigated the sensitivity of modeled snow instability to meteorological input data using SNOWPACK. We therefore used input data from the automatic weather station at the Weissfluhjoch field site for the year 2016-2017. We investigated three scenarios and performed 14'000 simulations for each scenario. The dataset contains extracted output data from modeled SNOWPACK simulations, including setup files to reproduce the simulations. For further information read the README file.

global-sensitivity-analysis

display_name: global-sensitivity-analysis

numerical-avalanche-forecasting

display_name: numerical-avalanche-forecasting

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

snowpack

display_name: snowpack

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Sensitivity of modeled snow instability


maintainer: Virginie Marques

en: environmental-dna marine fish dna-metabarcoding plankton fjord biodiversity

en: Code, data and figures

en: Here there are all the data and code to reproduce the figures and analysis presented in the paper, with a README.md file

en: Metabarcoding data

en: Raw metabarcoding data for both primers (teleo and 18S) and corresponding file to perform the demultiplexing and primer trimming

en:
This dataset contains the raw environmental DNA data associated with the publication *Environmental drivers of eukaryotic plankton and fish biodiversity in an Arctic fjord* in the journal Polar Biology (2023).

 Methods

**Sampling**
We sampled the Lilliehöök fjord on the west coast of Spitsbergen (Svalbard, Norway) over 3 days from 3 to 5 of August 2021. Samples were taken from the glacier front up to the fjord mouth of the Krossfjorden system, around 30 km long, after the Lilliehöök fjord merged with the mouth of Möller fjord. The fjord’s maximum depth has been recorded at 373 m (Svendsen et al. 2002) and has no sill at its entrance, thereby facilitating water exchange with the open ocean of the West Spitsbergen Current. We used a research vessel to sample 5 sites for a total of 15 samples, sampling 3 depths per site (3-m, chlorophyll a maximum and 85-m, unless sea floor was shallower). Shallow and intermediate samples between 3-m and 12-m represent ~35-L of water filtered in-situ using long tubing and a peristaltic pump, and all other deeper samples were taken from a total of 3 Niskin bottles (General Oceanics), representing 22-L of water sampled per sample. Water was filtered through a VigiDNA filtration capsule (SPYGEN) with a 0.20-µm pore size using an Athena peristaltic pump (Proactive Environmental Products, Bradenton, Florida) with a flow rate of ~1-L/min. Each sample was handled with single use tubing and gloves.

**Molecular**
To perform the amplification, we used two sets of primers: teleo (forward: ACACCGCCCGTCACTCT, reverse: CTTCCGGTACACTTACCATG; Valentini et al. 2016) and the universal eukaryotic 1389F/1510R primer pair, amplifying the V9-18S rDNA gene (Amaral-Zettler et al. 2009) (forward: TTGTACACACCGCCC, reverse: CCTTCYGCAGGTTCACCTAC).

 Data content:

+ Metabarcoding data: This zip file contains the 2 sequencing libraries filtered to only retain the samples used in the present study.
+ Code, data and figure: This zip file contains all data and code to reproduce the figures and the analysis in the study, with an associated README explaining the content of each folder.

 Additional informations
For more details, please see the Methods in the associated publication: DOI: 10.1007/s00300-023-03187-9.

dna-metabarcoding

display_name: dna-metabarcoding

fish

display_name: fish

fjord

display_name: fjord

marine

display_name: marine

plankton

display_name: plankton

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data: Environmental drivers of eukaryotic plankton and fish biodiversity in an Arctic fjord


weather-station-davos-wolfgang

maintainer: Jörg Wieder

title_for_slug: weather-station-davos-wolfgang

en: pressure weather raclets relative-humidity temperature

en: Weather Station Davos Wolfgang

en: The data file contains date and time (YYYY-MM-DD hh:mm:ss) in UTC, temperature (°C), relative humidity (%), pressure (hPa) at 10 m above ground and above sea level. The data was averaged over 10 minutes.

en: The dataset contains weather parameters measured at Davos Wolfgang (LON: 9.853594, LAT: 46.835577).

pressure

display_name: pressure

raclets

display_name: raclets

relative-humidity

display_name: relative-humidity

temperature

display_name: temperature

weather

display_name: weather


maintainer: Zhao

en: urban-land-use planning driving-factors land-dynamics austin

en: Potential driving factors of urban transformations of Austin over 25 years

en: In this study, the Austin metropolitan area, Texas, U.S., one of the fastest urban transformations and transformations regions, is selected to test the hypothesis that spatial planning and policies are important factors of urban transformations. Despite ample previous work in understanding the interactions between human and urban form transformation at specific areas, the actual interventions and outcomes of planning and policies (e.g., ‘smart growth’) on urban forms have been poorly measured. In this study, the potential influencing factors of urban transformations of Austin over 25 years were selected and collected.

austin

display_name: austin

driving-factors

display_name: driving-factors

land-dynamics

display_name: land-dynamics

planning

display_name: planning

urban-land-use

display_name: urban-land-use


maintainer: Yohann Chauvier

en: environmental-stratification independent-dataset random-stratified-sampling point-process-model cluster target-group covariate-correction survey-effort background-data plant-species

en: Non-copyright data, scripts, diversity outputs

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models


en: raclets anemometer wind-direction wind wind-velocity wind-speed

en: Sonic time

en: The data set contains the time in YYYY-mm-dd HH:MM:SS.sss for the anemometer data. The time is given in UTC+1.

en: Sonic temperature

en: The data set contains values of temperature (°C) measured with the anemometer at a sampling frequency of 20 Hz.

en: Sonic wind component w

en:
The data contains values for w direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component u

en:
The data contains values for u direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: Sonic wind component v

en:
The data contains values for v direction of the wind in a sampling frequency of 20 Hz.
Erroneour spikes were filterd in two steps.

1. Define moving window uₓ = u(i-3:i+3)
2. If u(i)-mean(uₓ) > 2*std(uₓ):u(i) = NaN

Frozen detectors resulted in continuous zero values (not filtered).
The wind speed and direction were calculated as follows:

wind speed = sqrt(u² + v²)
wind direction = 180° + (180° / PI)* arctan2 (-u, -v)

en: A Young 81000 sonic anemomenter was deployed at Gotschnagrat (LON: 46.859 LAT: 9.849) to record three components of the wind velocity (u, v, w in [m s‾ ¹]) and air temperature (Ts in [°C]). The anemomenter was mounted in direction North at a height of 1.5 m above snow surface at the beginning. The time within each data set is given in UTC+1. Instrument specifications can be found [here](http://www.youngusa.com/Manuals/81000-90(I).pdf) .

anemometer

display_name: anemometer

raclets

display_name: raclets

wind

display_name: wind

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

wind-velocity

display_name: wind-velocity

en: Snow Drift Station - 3D Ultrasonic


en: meteodat-gmbh wagital snow-water-equivalent snow gcos

en:
Total water reserves of the snow cover [mio m3] for Wägital catchment, Switzerland, for reference date April 1. Data is separated in 2 elevation zones 900m-1500m asl and 1500m-2300m asl. Time period 1943-2024, status 2024-04-22.

Funded currently or in the past by:

- Federal Office of Meteorology and Climatology MeteoSwiss in the context of GCOS Switzerland
- Meteodat GmbH
- Institute of Geography, University of Zurich
- WSL Institute for Snow and Avalanche Research SLF
- Institute of Geography, ETH Zurich (IAC ETH Zurich)
- AG Kraftwerk Wägital (AXPO and EWZ)

See also https://www.meteodat.ch/waegital.html

gcos

display_name: gcos

meteodat-gmbh

display_name: meteodat-gmbh

snow

display_name: snow

snow-water-equivalent

display_name: snow-water-equivalent

wagital

display_name: wagital

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow water equivalent for reference date April 1 for Wägital catchment, starting 1943


maintainer: Matthias Haeni

en: climate-change wind-speed temperature meteorology meteo swiss-forest-lab long-term par relative-humidity precipitation

en: Data plot of the forest station (ALB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Alpthal)

en: Site aerial photo from the Alpthal forest station. Source: Google. 2016. Site aerial photo from the Alpthal forest station. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Forest station data (ALB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for one meteorological station in Alpthal in Switzerland which is located within a natural coniferous forest (ALB) with Norway spruce (_Picea abies_; 180-230 yrs) as dominant tree species. The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Alpthal is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

educ

en: Education, culture and sport

en: EnviDat: the Environmental Data Portal

en: Alpthal, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: Stephanie Mayer

en: snow-profiles snowpack-simulation snow-stratigraphy rutschblock snow-instability snowpack failure-layer

en: Simulated snow profiles

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en: Observed snow profiles

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en: DAV data set: Properties of observed snow profiles and simulated failure layers

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

en: ReadMe

en: ReadMe file explaining data structure and content

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-instability

display_name: snow-instability

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack

display_name: snowpack

snowpack-simulation

display_name: snowpack-simulation

en: Observed and simulated snow profile data


figures-perspective-urban-beekeeping

title_for_slug: figures-perspective-urban-beekeeping

en: diversity-distributions wildbees hymenoptera urban-beekeeping insects urban-ecology

en: Local overheating values within 3 buffers in hives in Zurich

en:
The dataset contains the average overheating values around beehives in Zurich at three spatial scales (250, 500 and 1000 m). It contains 4 columns:
- buffer: indicating the spatial scale
-ID: hive ID (annonymised)
- mean.overwarming: mean overheating value, expressed in degrees Kelvin
-mena.overwarming.cor = transformed values do degrees Celsius

en: Data growth urban beekeeping

en:
The dataset contains the data of the growth of urban beekeeping in different cities.
For each city in a given year, it contains the following:
Continent.
Country.
City: the name of the city
Year: the year when the information was collected
Area: of the city
Total N. beekeepers: when available, the estimated number of beekeepers in that city for that given year
Total N. hives: when available, the estimated number of beehives in that city for that given year
Density: the total number of hives divided by the city area
Reference: the source of the information.

en: Proportion honeybees and wildbees

en:
The dataset contains the proportion of wildbees and honeybees in the different studies obtained from the literature review.
Article_ID: ID for each article, in the form of "A1", "A2", ..., "An"
DOI
Authors
Year: publication year
Duration sampling (years): numerical
Start_sampling: numerical, date
End_sampling: numerical, date
Continent
Country
N. cities: number of cities sampled in the article. Numerical.
City
Sampling type: categorical. Levels: active (e.g., Hand-netting); passive (e.g., pantraps. trap-nests); both (combination of passive and active methods).
Sampling methodology: categorical. Levels: direct observations, hand-netting, pantraps, interception traps, vane traps.
Number sites: total number of study sites.
Abundance honeybees: number of honeybees recorded
Abundance wild bees: number of wildbees recorded
Total bees: total number of bees	recorded.
Proportion honeybees: Abundance of honeybees / Total number of bees
Proportion wildbees: Abundance of wildbees / Total number of bees

en: Results literature review

en:
 The file shows the results from the literature review. Briefly, we searched papers using google scholar search engine using the following query: (“WILD BEE OR WILDBEE”)(“URBAN” OR “CITY”), and limited the time span from 2010-2023. The search query returned 200 candidate papers. In addition, we complemented the candidate papers from the literature research performed by Ferrari & Polidori (2022), adding 22 additional candidate papers. To select papers, we checked that (1) were conducted in urban areas; (2) sampled the whole bee community; (3) provided data on abundance of wildbees; (4) provided data on honeybees; and (5) provided individual abundance data of each wild bee species.
The dataset contains the following:
-Article_ID: ID for the specific article in the form "A1", "A2"..."An"
- Title: of the article
- Year: of publication
- Journal: of publication
- Publisher:
- Link: link to the publication
- DOI: when applicable
- Total abundance wild bees reported: was the total number of collected bees reported? Logical (Y/N)
- Honey bee abundance reported: was thenumber of honeybees collected reported? 	Logical (Y/N)
- Abundance per wild bee species: was the number of wildbee species sampled provided? Logical (Y/N)
- Select proportion: paper selected to calculate the proportion of honeybees and wildbees.
- Select RAD: paper selected to compute the rank-abundance distribution diagram
Comment: comments on the papers, data availability, etc.

en: DEPRECATED. Distirbution beehives among beekeepers

en: The dataset contains the number of beehives per registered beekeeper ID (annonymised) in four Swiss cities (Bern, Lausanne, Geneve, Zurich).

en: R script for the figures V1

en: Deprecated version of the R script

en: Data rank-abundance distribution urban bees

en: Bee communities, and dominance patterns, from urban ecology studies in cities around the world

en: Distribution beehives among beekeepers

en: The dataset contains the number of beehives per registered beekeeper ID (annonymised) in four Swiss cities (Bern, Lausanne, Geneve, Zurich) and Paris.

en: DEPRECATED. Data growth urban beekeeping

en: R script for the figures V2

en: R script for the figures

en: Coordinates studied cities

en: Coordinates (LatLon format) of the cities where data from urban bee ecology studies was used.

en: NDVI values within 3 buffers  in hives in Zurich

en:
The dataset contains the average NDVI values around beehives in Zurich at three spatial scales (250, 500 and 1000 m). It contains 3 columns_
- buffer: indicating the spatial scale
- ID: hive ID (annonymised)
- mean.NDVI: mean NDVI value

en:
Data and code from the perspective paper "When honeybees comes to town"
The .r file provides the code to generate the figures.
In addition, this repository contains the data for the figures 1-3.
For Figure 4, part of the data is confidential, Please, refer to the contacts provided:
- For the distribution of hives in Zurich (2018): https://www.zh.ch/de/gesundheitsdirektion/veterinaeramt.html
- For the overheating map of Zurich: Prof. Dr. Eberhard Parlow / Stadt Zurich (https://www.zh.ch/de/umwelt-tiere/umweltschutz/umweltpraxis/definitionsseite/2012/68/zup068_2012_a0030_klimaanalyse-pdf.html)

diversity-distributions

display_name: diversity-distributions

hymenoptera

display_name: hymenoptera

insects

display_name: insects

urban-beekeeping

display_name: urban-beekeeping

urban-ecology

display_name: urban-ecology

wildbees

display_name: wildbees

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Figures perspective urban beekeeping


en: remote-sensing raster-processing switzerland force sentinel-2

media_type: image/tiff

en: An example of the index EVI for one of the generated 30 by 30 km tiles located around the city of Zürich. The values are multiplied by 10.000. The date of the image is 24.07.2018.

format: TIFF

en:
We processed Sentinel-2 images from 2017 to 2023 for Switzerland with the Software FORCE (Frantz 2019). The respective parameter files can be found here: [Github](https://github.com/TLKoch/Sentinel-2_CH). All the images consist of several TB and therefore, access will be granted upon request.
The available bands (in spatial reference system EPSG 3035) are the following:
*Red, Green, Blue, NIR, Red-Edge-1, Red-Edge-2, Red-Edge-3, SWIR-1, SWIR-2*
The available indices (in spatial reference system EPSG 3035) are the following:
*CCI, CIRE, NDWI/NDMI, NDVI, EVI*
Further indices might be provided upon request.

 Processing
After downloading Level 1 data for the 14 Sentinel-2 tiles covering Switzerland (T31TGN, T32TLT, T32TMT, T32UMU, T32TNT, T32TPT, T31TGM, T32TLS, T32TMS, T32TNS, T32TPS, T32TLR, T32TMR, T32TNR) with an estimated cloud cover of less than 80 \%, we processed the data further with FORCE v. 3.7.8-12.
FORCE was used for radiometric correction, including atmospheric and topographic corrections using the digital elevation model from Copernicus Land Monitoring Service (EU-DEM v. 1.1), with a 25 m spatial resolution, a bidirectional reflectance distribution function (BRDF) correction, and an adjacency effect correction. For cloud masking, the improved Fmask algorithm with buffers of 300 m for clouds, 90 m for shadows, and 30 m for snow were used (Frantz et al. 2018; Zhu et al. 2015). All bands were resampled using cubic convolution to 10 m spatial resolution. Shadows, low and poor illumination as well as saturation were masked out. The co-registration of all images was made with monthly composites of near-infrared Landsat Collection 2 images from 2014 to 2021 (Rengarajan et al. 2020;Rufin et al. 2021). With this the geometric consistency improved. The processed images are available in tiles of 30 by 30 km.

 Example images
Uploaded is an example of the index EVI for one of the generated 30 by 30 km tiles located around the city of Zürich. The values are multiplied by 10.000. The date of the image is 24.07.2018.

force

display_name: force

raster-processing

display_name: raster-processing

remote-sensing

display_name: remote-sensing

switzerland

display_name: switzerland

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Sentinel-2 imagery of Switzerland