en: fractional-snow forest shading shortwave-radiation longwave-radiation

en: Seasonal sub-canopy radiation data

en:
Seasonal, spatially aggregated incoming and outgoing shortwave radiation below an evergreen forest stand collected with a cable car system.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover Control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: Radiation Data 18.04.2019

en:
Spatiotemporal incoming/outgoing shortwave and longwave radiation as well as sunlit and shaded-snow view fractions below an evergreen forest stand in the Swiss alps. Data was collected on 18th of April 2018 along a 48m long, heterogeneous forest stand under full snow cover conditions.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: Radiation Data 25.4.2018

en:
Spatiotemporal incoming/outgoing shortwave and longwave radiation as well as sunlit and shaded-snow view fractions below an evergreen forest stand in the Swiss alps. Data was collected on 25th of April 2018 along a 48m long, heterogeneous forest stand under partial snow cover conditions.

The presented data is used and further described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research Atmospheres. DOI:10.1029/2018JD029908.

en: Sky-view fraction along the cablecar transect

en: Data is used and described in the following paper: Malle et al. (2019). Shading by Trees and Fractional Snow Cover control the Subcanopy Radiation Budget. Journal of Geophysical Research. DOI:10.1029/2018JD029908.

en: This data set consists of incoming and outgoing short- and longwave radiation as well as sunlit-snow-view-fraction as described in the JGR-Atmospheres paper "Shading by trees and fractional snow cover control the sub-canopy radiation budget", by Malle et al. (2019). Data was collected along a 48m long, heterogeneous forest transect between January and June 2018 close to Davos, Switzerland.

forest

display_name: forest

fractional-snow

display_name: fractional-snow

longwave-radiation

display_name: longwave-radiation

shading

display_name: shading

educ

en: Education, culture and sport


bryophytes-of-europe-traits-bet-dataset

maintainer: EnviDat Support

title_for_slug: bryophytes-of-europe-traits-bet-dataset

en: life-history-traits indicator-values iucn mosses red-list liverworts hornworts bioclimatic-variables

state: active

type: dataset

media_type: text/plain

en: Text file including the BET dataset.

format: TXT

media_type: application/pdf

en: PDF including the (trait) explanations.

format: PDF

en: Excel file including the BET dataset and (trait) explanations.

format: XLS

en: The Bryophytes of Europe Traits (BET) dataset includes values for 65 biological and ecological traits and 25 bioclimatic variables for all 1816 bryophytes included in the European Red List (Hodgetts et al. 2019). The traits are compiled from several regional trait datasets and manually complemented using Floras, species-specific literature and expert knowledge. The bioclimatic variables are calculated using the European range of each species. Details regarding the trait compilation and extraction of bioclimatic variables can be found in the corresponding data paper (Van Zuijlen et al. 2023).

bioclimatic-variables

display_name: bioclimatic-variables

hornworts

display_name: hornworts

indicator-values

display_name: indicator-values

iucn

display_name: iucn

life-history-traits

display_name: life-history-traits

liverworts

display_name: liverworts

mosses

display_name: mosses

red-list

display_name: red-list

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester


wind-lidar-davos-wolfgang

title_for_slug: wind-lidar-davos-wolfgang

en: wind wolfgangpass raclets profiles lidar

en: Wind LIDAR data Wolfgang

media_type: application/zip

en: A Leosphere WidCube 100S was deployed at Davos Wolfang, measuring wind profiles as well as performing PPI and RHI scans. Time format is in UTC with highest time resolution of 5 seconds.

format: ZIP

mimetype: application/zip

en: Scanning wind Lidar from Meteoswiss was installed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577) and measured from 200 m above ground to 8100 m. The time resolution is up to 5 seconds. The Lidar was measuring wind profiles but also performed plan position indicator (PPI) and range height indicator (RHI) scans.

lidar

display_name: lidar

profiles

display_name: profiles

raclets

display_name: raclets

wind

display_name: wind

wolfgangpass

display_name: wolfgangpass

en: Wind LIDAR Davos Wolfgang


maintainer: Nander Wever

en: antarctica snow-density-profile microstructure snow-density snowmicropen

en: Documentation SnowMicroPen measurements

en: This *.zip archive contains all available documentation of the SnowMicroPen measurements, including the mapping of the SMP measurements in the terrestrial laser scan field at PEA (see documentation for 20161220) and at the Hammarryggen Ice Rise (see documentation for 20190104 and 20190111).

format: SERVICE

en: List of SnowMicroPen measurements

en: List of all SnowMicroPen measurements, including date and location, and processing status. This list has been generated by the python code (see other resources in this dataset).

en: Python code exported from the Jupyter notebook for processing the SnowMicroPen files

en: Manual snow pits and other snow density measurements

en: Jupyter notebook for processing the SnowMicroPen files.

en: SnowMicroPen pts files and processed txt files

en: Zip archive containing the acquired *.pts files (binary files recorded by the SnowMicroPen), and the converted *.txt files using the SMP.ipynb jupyter notebook (see the python code in the other resources in this dataset)

en: SnowMicroPen (SMP) measurements and manual snowpits from Dronning Maud Land, East Antarctica. Measurements were taken in the vicinity of the Belgium Princess Elisabeth Station (PEA), in a transect towards the coast, and on the Lokeryggen and Hammarryggen Ice Rises near the coast. Measurements were taken during 3 individual campaigns in the 2016-2017, 2018-2019 and 2019-2020 field seasons.

antarctica

display_name: antarctica

microstructure

display_name: microstructure

snow-density

display_name: snow-density

snow-density-profile

display_name: snow-density-profile

snowmicropen

display_name: snowmicropen

en: SnowMicroPen measurements and manual snowpits from Dronning Maud Land, East Antarctica


en: snow-height enet weissfluhjoch imis snow-water-equivalent snow-temperatures

en: DATA ACCESS

en:
Station WFJ2: merged IMIS + ENET datasets. Provides parameters height of snow, snow surface temperatures and snow temps at 0, 1, 1.5 m above ground surface. Supporting meteo data are also contained in this dataset.

fields      = timestamp TA RH TSG TSS HS VW DW VW_MAX OSWR PSUM VW_DRIFT DW_DRIFT TS1 TS2 TS3 HTS1 HTS2 HTS3

en: This dataset provides HS, TSS and TS50, TS100, TS150 at the station WFJ2 situated on the Weisfluhjoch research site (2536 m asl). It has been created from merging ENET and IMIS datsets to form a continuous timeseries from 1992- present. ENET is at 1 h resolution whereas IMIS is 30 min. This is a level 2 dataset as defined [here](http://models.slf.ch/p/dataset-processing/).

enet

display_name: enet

imis

display_name: imis

snow-height

display_name: snow-height

snow-temperatures

display_name: snow-temperatures

snow-water-equivalent

display_name: snow-water-equivalent

weissfluhjoch

display_name: weissfluhjoch

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: WFJ2: Snow measurements from the Weissfluhjoch research site, Davos


maintainer: James W. Kirchner

en: irfnnhsr greens-function system-identification deconvolution de-mixing arma-noise impulse-response-function time-series-analysis transfer-function irf nonlinear-deconvolution

en: README file for IRFnnhs.R and benchmark demonstration scripts

en: Benchmark demonstration scripts and results

en: Impulse Response Function script

en:
The R script IRFnnhs.R, which efficiently estimates impulse response functions for environmental systems that are nonlinear, nonstationary, or heterogeneous, based on their input and output time series.

Scripts and results for a series of benchmark tests are also provided, to accompany Kirchner, J.W., Impulse response functions for heterogeneous, nonstationary, and nonlinear systems, estimated by deconvolution and demixing of noisy time series, _Sensors_, 22(9), 3291, https://doi.org/10.3390/s22093291, 2022.

arma-noise

display_name: arma-noise

de-mixing

display_name: de-mixing

deconvolution

display_name: deconvolution

greens-function

display_name: greens-function

impulse-response-function

display_name: impulse-response-function

irf

display_name: irf

irfnnhsr

display_name: irfnnhsr

nonlinear-deconvolution

display_name: nonlinear-deconvolution

system-identification

display_name: system-identification

time-series-analysis

display_name: time-series-analysis

transfer-function

display_name: transfer-function

en: Impulse response functions for nonlinear nonstationary and heterogeneous systems


en: environmental-dna barcoding actinopterygii 12s teleo-primers mitochondrial-dna atlantic-ocean

en: This file contains the 12s mitochondrial sequences for the Atlantic fishes collected on a French scientific survey (Evhoe) for stock assessment.

media_type: text/csv

en: This file contains the metadata associated with each scientific survey

format: CSV

en: This file contains the Teleo Barcode for the Atlantic fishes collected during a French scientific survey (Evhoe) for stock assessment.

en: This file contains the metadata associated with each 12 s mitochondrial sequence.

en:
The global biodiversity crisis driven by anthropogenic pressures significantly threatens marine ecosystems functioning. The rate of climate change and the impacts of anthropogenic pressures outpacing the capabilities of our observation tools, stresses the need to develop new methods to assess these rapid modifications. Environmental DNA (eDNA; DNA traces released by organisms) metabarcoding has emerged as a non-invasive method that has been widely developed over the last decade. Thanks to a large spatio-temporal coverage, high detection of rare species and its time and cost effectiveness, eDNA metabarcoding represents a promising biomonitoring tool. However, capturing fish diversity using eDNA requires a high-quality genetic reference database, which we are currently still lacking. For the South European Atlantic shelf area, we estimated that only 41% of the fish species present were recorded in the available eDNA reference databases. Improving reference databases can notably rely on opportunistic sampling enabling the reporting of sequences for new species. Therefore, the data provided here consists of barcoding 95 species of ray-finned and cartilaginous fishes over the 12S mitochondrial DNA gene. We generated 168 12S barcodes from fishes that were sampled in the Bay of Biscay (Northeast Atlantic, France) between 2017 and 2019. We also provided the “Teleo” barcode associated with a specific 12S region for each individual. In addition to the sequences, we provided for each individual the taxonomy, the details associated with the barcode (Genbank accession number, chromatograms), a photograph, as well as 5 ecomorphological measures and 11 life-history traits. These traits document several functions such as dispersion, diet, habitat use, and position in the food web. Furthermore, we provided the metadata of each sampling site (date, station, sampling hour, gear, latitude, longitude, depth) and environmental variables measured in situ (conductivity, salinity, water temperature, water density, air temperature).
This data set is highly valuable to improve the Northeast Atlantic eDNA genetic database, thus helping to better understand the effects of environmental forcing in the Bay of Biscay, a transition zone housing mixed assemblages of boreal, temperate and subtropical fish species susceptible to display variability in functional traits to adapt to changing conditions.

actinopterygii

display_name: actinopterygii

atlantic-ocean

display_name: atlantic-ocean

barcoding

display_name: barcoding

environmental-dna

display_name: environmental-dna

mitochondrial-dna

display_name: mitochondrial-dna

teleo-primers

display_name: teleo-primers

en: ATLFISHREF A 12S mitochondrial reference dataset for metabarcoding Atlantic Fishes frequently caught during scientific surveys in the Bay of Biscay


maintainer: Leo Gallus Bont

en: geoprocessing seilaplan openstreetmap accessible-forest forest qgis

en: Power lines vector data (close to the area of the sample forest range)

en: Preview

media_type: image/png

format: PNG

mimetype: image/png

en: DEM (for the area of the sample forest range)

media_type: image/tiff

format: TIFF

mimetype: image/tiff

en: Juypter Notebook for Data Preparation (online)

en: Forest vector data (for sample forest range)

en: Juypter Notebook for Data Preparation

en: Digitised sample perimeter

en: Railways vector data (close to the sample forest range)

en:
This dataset contains open vector data for railways, forests and power lines, as well an open digital elevation model (DEM) for a small area around a sample forest range in Europe (Germany, Upper Bavaria, Kochel Forest Range, some 70 km south of München, at the edge of Bavarian Alps).
The purpose of this dataset is to provide a documented sample dataset in order to demonstrate geospatial preprocessing at FOSS4G2019 based on open data and software. This sample has been produced based on several existing open data sources (detailed below), therefore documenting the sources for obtaining some data needed for computations related to forest accessibility and wood harvesting. For example, they can be used with the open methodology and QGIS plugin [Seilaplan]( https://doi.org/10.16904/envidat.software.1) for optimising the geometric layout cable roads or with additional open software for computing the forest accessibility for wood harvesting.
The vector data (railways, forests and power lines) was extracted from OpenStreetMap (data copyrighted OpenStreetMap contributors and available from https://www.openstreetmap.org). The railways and forests were downloaded and extracted on 18.05.2019 using the open sources QGIS (https://www.qgis.org) with the QuickOSM plugin, while the power lines were downloaded a couple of days later on 23.05.2019.

Additional notes for vector data:
Please note that OpenStreeMap data extracts such as forests, roads and railways (except power lines) can also be downloaded in a GIS friendly format (Shapefile) from http://download.geofabrik.de/ or using the QGIS built-in download function for OpenStreetMap data. The most efficient way to retrieve specific OSM tags (such as power=line) is to use the QuickOSM plugin for QGIS (using the Overpass API - https://wiki.openstreetmap.org/wiki/Overpass_API) or directly using overpass turbo (https://overpass-turbo.eu/). Finally, the digitised perimeter of the sample forest range is also made available for reproducibility purposes, although any perimeter or area can be digitised freely using the QGIS editing toolbar.

The DEM was originally adapted and modified also with QGIS (https://www.qgis.org) based on the elevation data available from two different sources, by reprojecting and downsampling datasets to 25m then selecting, for each individual raster cell, the elevation value that was closer to the average. These two different elevation sources are:

- Copernicus Land Monitoring Service - EU-DEM v.1.1 (TILE ID E40N20, downloaded from https://land.copernicus.eu/imagery-in-situ/eu-dem/eu-dem-v1.1; this original DEM was produced by the Copernicus Land Monitoring Service “with funding by the European Union” based on SRTM and ASTER GDEM)
- Digitales Geländemodell 50 m Gitterweite (https://opendata.bayern.de/detailansicht/datensatz/digitales-gelaendemodell-50-m-gitterweite/), produced by the Bayerische Vermessungsverwaltung – www.geodaten.bayern.de –and downloaded from http://www.geodaten.bayern.de/opendata/DGM50/dgm50_epsg4258.tif

This methodology was chosen as a way of performing a basic quality check, by comparing the EU-DEM v.1.1 derived from globally available DEM data (such as SRTM) with more authoritative data for the randomly selected region, since using authoritative data is preferred (if open and available). For other sample regions, where authoritative open data is not available, such comparisons cannot longer be performed.

Additional notes DEM: a very good DEM open data source for Germany is the open data set collected and resampled by Sonny (sonnyy7@gmail.com) and made available on the Austrian Open Data Portal http://data.opendataportal.at/dataset/dtm-germany. In order to simplify end-to-end reproducibility of the paper planned for FOSS4G2019, we use and distribute an adapted (reprojected and resampled to 25 meters) sample of the above mentioned dataset for the selected forest range.

This sample dataset is accompanied by software in Python, as a Jupiter Notebook that generates harmonized output rasters with the same extent from the input data. The extent is given by the polygon vector dataset (Perimeter). These output rasters, such as obstacles, aspect, slope, forest cover, can serve as input data for later computations related to forest accessibility and wood harvesting questions. The obstacles output is obtained by transforming line vector datasets (railway lines, high voltage power lines) to raster. Aspect and slope are both derived from the sample digital elevation model.

accessible-forest

display_name: accessible-forest

forest

display_name: forest

geoprocessing

display_name: geoprocessing

openstreetmap

display_name: openstreetmap

qgis

display_name: qgis

seilaplan

display_name: seilaplan

educ

en: Education, culture and sport

en: Sample Geodata and Software for Demonstrating Geospatial Preprocessing for Forest Accessibility and Wood Harvesting at FOSS4G2019


maintainer: Marcia Phillips

en: ritigraben permafrost meteo-station permos borehole

en: DATA ACCESS

en: Meterological station at the [Ritigraben permafrost borehole](http://www.envidat.ch/dataset/rit1) (RIT_0102) in canton Valais, Switzerland. The station is located at 2690 m asl on a flat site.

borehole

display_name: borehole

meteo-station

display_name: meteo-station

permafrost

display_name: permafrost

permos

display_name: permos

ritigraben

display_name: ritigraben

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: RIT2: Meteorological station at Ritigraben borehole site


maintainer: Lisa Hülsmann

en: tree-growth forest-reserves inventory-data tree-mortality empirical-mortality-models

en: Calibration data

en:
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.

 Meta data
Reserve: Name of the forest reserve

Plot: Permanent plot number

 Tree data
Species: Latin species name (or species group, cf. _Quercus_ spp.)

y: Status of the tree with 0 = alive and 1 = dead

dt: Length of the mortality period (years)

DBH: Diameter at breast height (mm) of the second inventory

relBAI: Annual relative basal area increment (-) calculated based on the first and the second DBH measurement as the compound annual growth rate of the trees basal area

 Stand data
_All stand variables were calculated for the second inventory._

mDBH: Mean diameter at breast height (mm)

iqrDBH: Interquartile range of diameter at breast height (mm)

BA: Basal area per hectare (m2 ha-1)

N: Number of trees per hectare (ha-1)

 Climate data
_Both climate variables were calculated for the period between the second and the third inventory._

P: Mean annual precipitation sum (mm)

mT: Mean annual air temperature (°C)

mimetype: text/csv

en:
The dataset comprises > 90 000 records from inventories in 54 strict forest reserves in [Switzerland](https://www.wsl.ch/de/wald/biodiversitaet-naturschutz-urwald/naturwaldreservate.html) and [Lower Saxony / Germany](http://naturwaelder.de/) along a considerable environmental gradient. It was used to develop parsimonious, species-specific mortality models for 18 European tree species based on tree size and growth as well as additional covariates on stand structure and climate.

 Inventory data
Measurements had been conducted repeatedly on up to 14 permanent plots per reserve for up to 60 years with re-measurement intervals of 4 - 27 years. The permanent plots vary in size between 0.03 and 3.47 ha. The inventories provide diameter measurements at breast height (DBH) and information on the species and status (alive or dead) of trees with DBH ≥ 4 cm for Switzerland and ≥ 7 cm for Germany.

 Data selection
We excluded three permanent plots where at least 80 % of the trees died during an interval of 10 years, and mortality could be clearly assigned to a disturbance agent. Mortality in the remaining stands was rather low, with a mean annual mortality rate of 1.5 % and strong variation between plots from 0 to 6.5 % (assessed for trees of all species with DBH ≥ 7 cm).
We only used data from permanent plots with at least 20 trees per species to obtain reliable plot-level mortality rates even for species with low mortality rates (about 5 % during 10 years), and selected tree species occurring on at least 10 plots to cover sufficient ecological gradients. This led to a dataset of 197 permanent plots and 18 tree or shrub species: _Abies alba_ Mill., _Acer campestre_ L., _Acer pseudoplatanus_ L., _Alnus incana_ Moench., _Betula pendula_ Roth, _Carpinus betulus_ L., _Cornus mas_ L., _Corylus avellana_ L., _Fagus sylvatica_ L., _Fraxinus excelsior_ L., _Picea abies_ (L.) Karst, _Pinus mugo_ Turra, _Pinus sylvestris_ L., _Quercus pubescens_ Willd., _Quercus_ spp. (_Q. petraea_ Liebl. and _Q. robur_ L.; not properly differentiated in the Swiss inventories), _Sorbus aria_ Crantz, _Tilia cordata_ Mill. and _Ulmus glabra_ Huds..

 Predictors of tree mortality
We considered tree size and growth as key indicators for mortality risk. Radial stem growth between the first and second inventory and DBH at the second inventory were used to predict tree status (alive or dead) at the third inventory. To this end, the annual relative basal area increment (relBAI) was calculated as the compound annual growth rate of the trees basal area. Additional covariates on stand structure and climate comprise mean annual precipitation sum (P), mean annual air temperature (mT), the mean and the interquartile range of DBH (mDBH, iqrDBH), basal area (BA) and the number of trees (N) per hectare.

 Further information
For further information, refer to Hülsmann _et al_. (in press) How to kill a tree – Empirical mortality models for eighteen species and their performance in a dynamic forest model. _Ecological Applications_.

empirical-mortality-models

display_name: empirical-mortality-models

forest-reserves

display_name: forest-reserves

inventory-data

display_name: inventory-data

tree-growth

display_name: tree-growth

tree-mortality

display_name: tree-mortality

en: Calibration data for empirical mortality models of 18 European tree species


maintainer: Dominique Weber

en: management land-use use-intensity grassland sentinel-2 mowing remote-sensing landsat

en: Grassland-use intensity map 2018

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2018. See readme file for more details.

format: GeoTIFF

en: Webcam-based reference data

en: Webcam-based reference data from 2020 and 2021 (see readme).

en: Preview time of 1st grassland management event 2020

en: Spatial distribution of the timing (day of year; DOY) of the first management event for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the timing of the first event of the year (Weber et al., 2023; IN REVIEW)

en: Preview number of grassland management events 2020

en: Spatial distribution of the number of management events for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the distribution of management frequency (Weber et al., 2023; IN REVIEW)

en: Grassland-use intensity map 2021

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2021. See readme file for more details.

en: Readme

en: Metadata and description of the maps and webcam-based reference data.

en: Grassland-use intensity map 2020

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2020. See readme file for more details.

en: Grassland-use intensity map 2019

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2019. See readme file for more details.

en:
A rule-based algorithm [(Schwieder et al., 2022)](https://doi.org/10.1016/j.rse.2021.112795) was used to produce annual maps for 2018–2021 of grassland-management events, i.e. mowing and/or grazing, for Switzerland using Sentinel-2 and Landsat 8 satellite time series. All satellite images were processed with the [FORCE](https://force-eo.readthedocs.io) framework.

The resulting maps provide information on the number and timing of grassland-management events at a spatial resolution of 10 m × 10 m for the whole of Switzerland. For the final maps, permanent grasslands were masked using a variety of land-use layers, according to [Huber et al. (2022)](https://doi.org/10.1002/rse2.298) but replacing the crop mask with the agricultural-use data from the cantons.

We assessed the detection of management events based on independent reference data, which we acquired from daily time series of publicly available webcams that are widely distributed across Switzerland. We further tested the ecological relevance of the generated intensity measures in relation to nationwide biodiversity data (see [Weber et al., 2023](https://doi.org/10.1002/rse2.372)).

The webcam-based reference data used for verification was subsequently added on 14.02.2024.

grassland

display_name: grassland

land-use

display_name: land-use

landsat

display_name: landsat

management

display_name: management

mowing

display_name: mowing

remote-sensing

display_name: remote-sensing

use-intensity

display_name: use-intensity

en: Grassland-use intensity maps for Switzerland


maintainer: Axel Volkwein

en: natural-hazards experiment field-data field-tests field-test mass-movements experiments rockfall trajectory

en: Overview of all tests

en:
This table gives an overview on all tests performed including
- block used
- start & end position
- number of jumps
- etc.
-

en: Block trajectories recorded from local positioning system

en: This file contains more than 80 rockfall trajectories projected onto the terrain, i.e. the positions of the single blocks over time during the single tests that were recorded by the local positioning system with about 10Hz. It contains the detected positions as well as a smoothened path (see Volkwein et al., Geosciences, 2018). The table also contains the derived velocities and accelerations along the slope (attention: these accelerations are the once that occur during an impact).

en: Jumps and impacts

en: This table contains data of more than 2200 of each jumps and impacts of the test blocks on a grassy slope. It gives there durations in combination with acting accerlartions and the rotational speed of the blocks. The data were retrieved using the block internal accelerometer and rotation sensors. The combination of these data with the measurement from the local positioning system allows the deduction of jump lengths, slope gradient etc.

en: These data contain the point clouds obtained from laser scanning the test slope and the six test blocks used for the experiments. The coordinates of the slope are given in CH-1903 format. The coordinates of the block point clouds are kept in a lokal x/y/z coordinate system.

en:
In summer 2014, 6 rock blocks between 20 and 80kg have been thrown in total 111 times down a slope at the Swiss Oberalppass close to the village Tschamut. The slope was mainly covered by grass and its lower part was flat and large enough to provide natural runouts of the single trajectories.

An extensive measurement program has been set up to measure the block trajectories: With surveyor's instruments the slope and the six used rock blocks were scanned and the start and end positions of each test were recorded. During the single events two cameras filmed the trajectories. A special sensor device located within the blocks recorded the acting accelerations and rotational speeds over time. Further, the device emitted a Wifi signal that got detected from eight receivers around the slope. Based on this signal the block position has been recorded over time.

The dataset contains all data that were gathered through above field campaign.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

mass-movements

display_name: mass-movements

natural-hazards

display_name: natural-hazards

rockfall

display_name: rockfall

trajectory

display_name: trajectory

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Repetitive trajectory testing in Tschamut 2014


maintainer: Thorsten Bartels-Rausch

en: heterogeneous reaction laboratory-study chemistry snow interface brine arctic ozone alpine metamorphism solution antarctica

en: Acetone data

en:
intensity of the acetone-water-cluster and water-cluster (as derived by a chemical ionisation mass spectrometer) with time in the carrier gas downstream of packed bed flow tube holding the snow sample or the by-pass, respectively. Time "0" denotes the time when the mass spectrometer data acquisition was started. When the carrier
gas with acetone was passed via the packed bed flow tube, that is switched from by-pass to pass the snow, acetone concentration in the carrier gas rapidly dropped due to surface adsorption and slowly recovered as the adsorption sites saturate. From this, the surface area can be obtained.

en: Matlab Data

en: All data as Matlab mat file

en: data list

en: Lists file names, snow sample properties, and flow settings for each data-set.

en: Data Figure 1

en: Data of published Figure

en: Readme file

en: This file shows data, code, and plots.

mimetype: application/pdf

en: Matlab Script to view and plot data

en: Ozone data

en: Trend of ozone mixing ratio ( _O3mixingRatio_ppb_ with time ( _time_s_ ) as measured downstream of the snow sample during the experiments. Time "0" denotes the time when data acquisition with ozone analyser was started. And, ozone (_nOzone_molec_per_s_ ) loss for each experiment with duration of ozone exposure ( _duration_s_ ) of ozone exposure, as derived from the ozone trends shown above. Time "0" denotes the time when the carrier gas with ozone was passed via the snow sample.

en: Earth’s snow cover is very dynamic on diurnal time scales. The changes to the snow structure during this metamorphism have wide ranging impacts such as on avalanche formation and on the capacity of surface snow to exchange trace gases with the atmosphere. Here, we investigate the influence of dry metamorphism, which involves fluxes of water vapor, on the chemical reactivity of bromide in the snow. For this, the heterogeneous reactive loss of ozone at a concentration of 5-6E12 molecules cm-3 is investigated in artificial, shock-frozen snow samples doped with 6.2 uM sodium bromide and with varying metamorphism history. The oxidation of bromide in snow is one reaction initiating polar bromine releases and ozone depletions.

alpine

display_name: alpine

antarctica

display_name: antarctica

arctic

display_name: arctic

brine

display_name: brine

chemistry

display_name: chemistry

heterogeneous

display_name: heterogeneous

interface

display_name: interface

laboratory-study

display_name: laboratory-study

metamorphism

display_name: metamorphism

ozone

display_name: ozone

reaction

display_name: reaction

snow

display_name: snow

solution

display_name: solution

en: Data set on bromide oxidation by ozone in snow during metamorphism from laboratory study


en: ecohydrology diel-cycle evapotranspiration snowmelt streamflow groundwater sap-flow diurnal-cycle

en: MODIS NDSI script

en: Google Earth Engine script for computing MODIS normalized difference snow index (NDSI) values and averaging them over subcatchment areas.

mimetype: text/plain

en: Daily time series

en: Daily hydrometeorological and ecohydrological time series

en: Metadata

en: Column descriptions for both data files, and map coordinates for all measurement locations.

en: Subcatchment polygons

en: Subcatchment polygons for use in the Google Earth Engine scripts.

en: 30-minute time series

en: 30-minute hydrometeorological and ecohydrological time series.

en: MODIS EVI2 script

en: Google Earth Engine script for computing MODIS two-band enhanced vegetation index (EVI2) values and averaging them over subcatchments.

en:
Hydrometerological and ecohydrological time series from Sagehen Creek and Independence Creek, Sierra Nevada, USA, illustrating hydrological responses to daily cycles in snowmelt and evapotranspiration forcing.

Data include 30-minute time series of

- weather variables,

- sap flow fluxes,

- groundwater levels (in two riparian transects of shallow groundwater wells),

- and stream stages (at 12 sites spanning a 500-meter elevation gradient),

and daily time series of

- temperature, precipitation, and snow water equivalent at three nearby snow telemetry stations

- diel cycle index values for groundwater levels and stream stages,

- and MODIS normalized difference snow index (NDSI) and enhanced vegetation index (EVI2) values averaged over selected subcatchments.

Google Earth Engine scripts for extracting the MODIS data are also provided.

diel-cycle

display_name: diel-cycle

diurnal-cycle

display_name: diurnal-cycle

ecohydrology

display_name: ecohydrology

evapotranspiration

display_name: evapotranspiration

groundwater

display_name: groundwater

sap-flow

display_name: sap-flow

snowmelt

display_name: snowmelt

streamflow

display_name: streamflow

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Daily cycles in solar flux, snowmelt, transpiration, groundwater, and streamflow at Sagehen and Independence Creeks, Sierra Nevada, USA


en: x-ray-tomography slow-snow-compression-experiments ice snow-mechanics microstructure

en: slow snow compression experiments

en: Compression experiments, X-ray images and with supplemented README file

en: README

en: README file gives an overview of the organization of the data

en:
We conducted consecutive loading-relaxation experiments at low strain rates to study the viscoplastic behavior of the intact ice matrix in snow. The experiments were conducted using a micro-compression stage within the X-ray tomography scanner in the SLF cold laboratory.

Next, to evaluate the experiments, a novel, implicit solution of a transient scalar model was developed to estimate the stress exponent and time scales in the effective creep relation (Glen's law). The result reveals that, for the first time, a transition in the exponent in Glen's law depends on geometrical grain size. A cross-over of stress exponent $n=1.9$ for fine grains to $n=4.4$ for coarse grains is interpreted as a transition from grain boundary sliding to dislocation creep.

The dataset includes compression force data from 11 experiments and corresponding 3D image data from tomography scans.

ice

display_name: ice

microstructure

display_name: microstructure

slow-snow-compression-experiments

display_name: slow-snow-compression-experiments

snow-mechanics

display_name: snow-mechanics

x-ray-tomography

display_name: x-ray-tomography

en: A grain-size driven transition in the deformation mechanism in slow snow compression


en: time-series alptal groundwater studibach switzerland

en:
Groundwater time series of the monitoring network in the Studibach (C7) catchment, Alptal, Switzerland published in
Rinderer M., van Meerveld I, McGlynn B. (2019): From points to patterns – Assessing runoff source area dynamics and hydrological connectivity using time series clustering. Water Resources Research, doi: 2018WR023886R

en: Groundwater time series between 2010 and 2014 of the distributed monitoring system in the Studibach (C7), Alptal, Switzerland. Data published in Rinderer M., van Meerveld I, McGlynn B. (2019): From points to patterns – Assessing runoff source area dynamics and hydrological connectivity using time series clustering. Water Resources Research, doi: 2018WR023886R

alptal

display_name: alptal

studibach

display_name: studibach

switzerland

display_name: switzerland

time-series

display_name: time-series

en: Groundwater time series Studibach (Rinderer et al., 2019, WRR)


causal-effect-of-mfoz

title_for_slug: causal-effect-of-mfoz

en: built-up-land-change causality selection-bias the-major-function-oriented-zone fujian-province propensity-score-matching

en: Data and Stata code for repeating the results

en:
Data.xlsx is the variables of 952 townships
Table 1-2 NN(1-1)_noreplace_caliper(0.01).do is STATA code to produce the results in Table 1 and 2
Figure 5 Distribution of the propensity scores.R is R code rto produce Figure 5
Figure 5 Standard mean difference.R is R code rto produce Figure 5

en:
Title: Closer to causality: How effective is spatial planning in governing built-up land expansion in Fujian Province, China?

Research objective: The Major Function Oriented Zone (MFOZ), the first strategic spatial plan in China, is developed to achieve a coordinated regional development, through spatial regulation and zoning of development. The MFOZ he MFOZ divided land into four major function-oriented zones: The development-optimized zone, the development-prioritised zone, the development-restricted zone, and the development-prohibited zone. We used propensity score marching to evaluate the effect of the MFOZ on built-up land expansion in Fujian Province over three time intervals (2013–2015, 2013–2018 and 2013–2020).

Data: Data.xlsx contains the variables of 954 towns in Fujian Province.
Town_ID is the town unique ID;
County_ID is the county unique ID;
City_ID is the city unique ID;
MFOZ is the the development-prioritised zone and the development-restricted zone (The development-optimized zone and the development-prohibited zone are excluded);
Builtup_13_15 is the built-up land expansion from 2013 to 2015;
Builtup_13_18 is the built-up land expansion from 2013 to 2018;
Builtup_13_20 is the built-up land expansion from 2013 to 2020;
Dis2water is the Euclidean distance from the town to the nearest waterbody;
Slope is the the average slope within the town;
GDP is the average GDP in 2010 within the town;
Pop is the average population in 2010 within the town;
Road is the average population in 2010 within the town;
Dis2city is the Euclidean distance from the town to the nearest prefectural city centre;
Nei_Arable, Nei_Forest, and Nei_Built.up are the area of arable land, forest land, and built-up land neighbouring town i in 2010.

Method: we used the propensity score matching to compare the changes in the amount of built-up land in the towns of the development-prioritised zone with the matched towns of the development-restricted zone. Additionally, we used three evaluation intervals (2013–2015, 2013–2018 and 2013–2020) to evaluate temporal variation in the causal effect of the MFOZ on built-up land expansion.

built-up-land-change

display_name: built-up-land-change

causality

display_name: causality

fujian-province

display_name: fujian-province

propensity-score-matching

display_name: propensity-score-matching

selection-bias

display_name: selection-bias

the-major-function-oriented-zone

display_name: the-major-function-oriented-zone

en: Causal effect of MFOZ


en: winter-electricity photovoltaic alps bifaciality snow

en:
Title: Monitoring data set at A1 (test-site of Totalp), years 2018-2022
Provider: ZHAW - EKZ
Edition: Y.Frischholz, Laboratory of Cryospheric Sciences, EPFL
Last edition: 17.01.2024
File name structure:
The test site contains 6 segments named from A to F. The six files provided in the data/ subfolder follow the same naming convention (e.g. for segment A, the file name is: “A1_A.csv”). Refer to the publication for further details on the setups of the segments.
File format:
All files are provided in the CSV format.
Column headings:
	•	timestamp (datetime64): time stamp in format “YYYY-MM-DD HH:mm:ss”, time-zone: UTC
	•	poa_front (double): front plane-of-array irradiation (W/m**2)
	•	poa_back (double): rear plane-of-array irradiation (W/m**2)
	•	mod_temp (double): module’s temperature (°C)
	•	P_AC (double): output AC power (W)
Preprocessing:
	Outliers:
	⁃	Quantiles Q1 and Q99 are computed for each variable
	⁃	Values below Q1 and above Q99 are considered outliers
	⁃	Outliers are replaced by NaNs.
	Missing data:
	⁃	Data holes of less than 3 hours are interpolated linearly for all variables
	⁃	Data holes of more than 3 hours are replaced using the monthly nan-mean of the considered hour if more than 50% of the qualifying data points are available. For instance, if the data point 2022-12-12 12:12:00, is missing for a given variable and is part of a data hole larger than 3 hours, then it is replaced by the mean of all data points with hour = 12 of the month of December 2022, if 50% of all the qualifying data points are not NaN. In case more than 50% of the qualifying points are missing, the data point remains as missing (NaN).
	Wiring losses :
	⁃	As described in [1] , the test-site setup caused abnormally large wiring losses, mainly due to the distance to optimisers and to the low installed power per DC-wire.
	⁃	The wiring losses comprised between 10% and 15%, are averaged hourly and added to the measured DC power.

	Misc.:
	⁃	P_AC is computed for each segment based on the measured DC power and the average inverter’s efficiency (96.1%).
	⁃	As described in [1], the peak power of the installed module, used to compute the final yield is slightly different from the values announced by the manufacturer.
Mean uptime:
	Raw:
	⁃	95.2%
	Processed:
	⁃	100%
References:
[1] 	D. Anderegg, S. Strebel, and J. Rohrer, “Alpine Photovoltaik Versuchsanlage Davos Totalp : Erkenntnisse aus 5 Jahren Betrieb,” de, Sep. 	2023, Accepted: 2023-09-29T09:13:16Z Publisher: ZHAW Zürcher Hochschule für Angewandte Wissenschaften.DOI: 10.21256/	zhaw-2524. [Online]. Available: https://digitalcollection.zhaw.ch/handle/11475/28797 (visited on 12/15/2023).

en:
Title: Monitoring data set at A2 (utility-scale power-plant Muttsee), months 10.2022-09.2023
Provider: AXPO - IWB Industrielle Werke Basel
Last edition: 17.01.2024
Editor: Y.Frischholz, Laboratory of Cryospheric Sciences, EPFL
File name structure:
The power-plant is made of 23 string boxes (GAK) and inverters (WR) named after their given number. One file per device is provided in the data/ subfolder, following the same naming convention (e.g. for the string box number 1, the file name is: “A2_GAK01.csv” and for the corresponding inverter, the file name is “A2_WR01.csv”). Refer to the publication for further details on the setup of the power plant.
File format:
All files are provided in the CSV format.
Column headings:
	String boxes and inverters (GAK & WR):
	⁃	device_name (string): name of the device (same as file name)
	⁃	timestamp (datetime64): time stamp in format “YYYY-MM-DD HH:mm:ss”, time-zone: UTC
	String boxes (GAK):
	⁃	I_ (double): input current from the substring number (W)
	⁃	I_SUM (double): output current of string box (A)
	⁃	U_DC (double): output voltage of string box (V)
	⁃	P_DC_ (double): input DC power from the substring number (W)
	⁃	P_DC (double): output DC power of string box (W)
	⁃	$S$_T#_$T$ (double): temperature from the sensor connected to the string box (empty if not existing), placed on the “front” or “back” side (S) of table T. Two types of temperature measurements (#) are available: 1=standard cell temperature (°C) , 2=module temperature on the rear side (°C) .
	⁃	$S$_SRAD_T (double): poa irradiation (W/m**2) from the sensor connected to the string box (empty if not existing), placed on the “front” or “back” side (S) of table T.
		Inverters (WR):
	⁃	I_DC (double): input DC current(A)
	⁃	U_DC(double): input DC voltage(V)
	⁃	P_DC (double): input DC power (W)
	⁃	P_AC (double): output AC power (W)
Preprocessing:
	1. Outliers:
	⁃	Quantiles Q1 and Q99 are computed for each variable
	⁃	Values below Q1 and above Q99 are considered outliers
	⁃	Outliers are replaced by NaNs.

	2. Missing data:
	⁃	Data holes of less or equal to 3 hours are interpolated linearly for all variables
	⁃	Data holes of more than 3 hours are replaced using the monthly nan-mean of the considered hour if more than 50% of the qualifying data points are available. For instance, if the data point 2022-12-12 12:12:00, is missing for a given variable and is part of a data hole larger than 3 hours, then it is replaced by the mean of all data points with hour = 12 of the month of December 2022, if 50% of all the qualifying data points are not NaN. In case more than 50% of the qualifying points are missing, the data point remains as missing (NaN).
	3. Wiring losses:
	⁃	To be consistent with A1, wiring losses are corrected at A2. The wiring loss between the string boxes and the inverters is removed by multiplying the value of input P_DC at the inverter level (P_DC,inv) by the mean ratio P_DC,inv / P_DC,arr.
	⁃	The computed mean wiring loss is 2.3\%. It is computed from 2023-02-01 to 2023-09-30, after the long data hole in the data sets of the string boxes.

Mean uptime:
	Raw:
	⁃	WR: 98.2%
	⁃	GAK*: 38.5%
	Processed:
	⁃	WR: 99.6%
	⁃	GAK*: 56.4%

	*The uptime at the string box level (GAK) is low because PMUs at this level shut down during steady and low signal leading to unavailable data at night. In addition, the 23 days downtime of 	January 2023 could not be interpolated nor replaced.

en:
On this repository you can find the monitoring data of the 3 PV power-plants analysed in the article _"Confirmation of the power gain for solar photovoltaic systems in alpine areas"_ (doi: 10.3389/fenrg.2024.1372680) . Each folder contains the following two elements:
1. **README.txt** : describes the content of the folder. Especially it describes the plant's monitoring system's architecture and relates it to the various files included in the data sub-folder. It also provides a detailed description of all processing steps leading to the data sets as available in the data sub-folder and used in the pre-cited article.
3. **data/** : sub-folder containing the file(s) used in the referenced article.

alps

display_name: alps

bifaciality

display_name: bifaciality

photovoltaic

display_name: photovoltaic

snow

display_name: snow

winter-electricity

display_name: winter-electricity

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Monitoring data sets of alpine photovoltaic power-plants


maintainer: Giulia Mazzotti

en: forest-snow snow-distribution forest-structure snow-modelling snow-energy-balance

en: Grid point nomenclature

en: The grid structure of each forest site and the respective nomenclature applied to label individual points within each grid are outlined here.  Each point marks the location of snow depth measurements and co-located canopy structure parameters.

en: Meteo data to drive FSM2 model

en: Includes meteorological driving data used to run the forest snow model FSM2, processed and parsed in text files that match the format required by FSM2. Separate files are available for each field area (Laret, Drusatscha and Ischlag) and season (2012/13, 2013/14, 2014/15). Each file includes data for the period from October 1st to May 31st at hourly resolution.

en: Coordinates data

en: Includes coordinate information of each surveyed point (7 x 276 = 1932 forest points, 2 open areas)

en: Snow depth data forest sites

en: Contains all snow depth data acquired at all forest sites during winters 2012/13, 2013714 and 2014/15.

en: Canopy data

en: Includes all canopy structure metrics computed at all surveyed locations

en: Snow depth data open sites

en: Contains all snow detph data accquired at open sites nearby the forest stands during the same period.

en:
This dataset contains all snow, canopy and meteorological data presented and used in the publication: Mazzotti, G., Essery, R., Moeser, D. & Jonas T. (2020) 'Resolving spatial variability of forest snow using an energy-balance model with a 1-layer canopy'. Water Resources Research, https://doi.org/10.1029/2019WR026129.
This publication must be cited when using this dataset.

forest-snow

display_name: forest-snow

forest-structure

display_name: forest-structure

snow-distribution

display_name: snow-distribution

snow-energy-balance

display_name: snow-energy-balance

snow-modelling

display_name: snow-modelling

en: Snow depth, canopy structure and meterorological datasets from the Davos area, Switzerland, Winters 2012/13-2014/15, used for high-resolution forest snow modelling


en: climate-change-impact water-temperature hydrology model discharge

en: Data access

en:
This work presents the first extensive study of climate change impacts on rivers temperature in Switzerland. Results show that even for low emissions scenarios, water temperature increase will lead to adverse effect for both ecosystems and socioeconomic sectors (such as nuclear plant cooling) throughout the 21st century. For high emissions scenarios, the effect will be worsen. This study also shows that water warming in summer will be more important in Alpine regions than in lowlands.
This material is distributed under CC BY 4.0 license (https://creativecommons.org/licenses/by/4.0/legalcode).

climate-change-impact

display_name: climate-change-impact

discharge

display_name: discharge

hydrology

display_name: hydrology

model

display_name: model

water-temperature

display_name: water-temperature

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Dataset for: Future water temperature of rivers in Switzerland under climate change investigated with physics-based models


maintainer: Matthias Haeni

en: climate-change meteorology temperature swiss-forest-lab wind-speed relative-humidity meteo precipitation long-term par

en: Site aerial photo (Chironico)

en: Site aerial photo from both Chironico stations. Source: Google. 2016. Site aerial photo from both Chironico stations. Retrieved November 11, 2016, from https://www.google.ch/maps

mimetype: image/jpeg

en: Site photo of the field station (CIF)

en: Site photo of the field station from the side.

en: Data plot of the field station (CIF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Forest station data (CIB)

en: Data file.

en: Site photo of the forest station (CIB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Data plot of the forest station (CIB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Chironico in Switzerland where one station is located within a natural coniferous forest stand (CIB) with Norway spruce (_Picea abies_; 160-180 yrs) and European silver fir (_Abies alba_; 140-160 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, CIF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Chironico is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Chironico, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 2000 onwards


maintainer: Lyu

en: species-range-map pinales species-distribution-model species-occurrence fagales species-richness

en: Species range maps of species in Fagales and Pinales (with enough occurrences)

en: species_map.zip includes species 1690 range maps generated based on the integrated method described in Lyu et al., (2022). File names with (polygon) indicate that this map is only generated by polygon mapping, as there are not enough occurrences for SDMs.

en: Occurrence maps for species of Fagales and Pinales with few records

en: Point_buffer.zip includes 267 occurrence maps of species that do not have enough occurrence data for polygon mapping.

en:
This database contains 1957 distribution maps of species from Fagales and Pinales constructed based on a method integrating polygon mapping and SDMs (Lyu et al., 2022).
To construct the maps, we first collected occurrence data from 48 different sources. According to the number of occurrences after data cleaning, three kinds of maps are constructed: (1) For species with more than 20 occurrences, we performed SDM and polygon mapping described in Lyu et al. (2022) and select the integration of the two layers as the distribution range; (2) For species with more than 4 but less than 20 occurrences, we only use polygon mapping to draw the distribution range; (3) For species with less than 4 occurrences, a 20-km buffer was generated around the occurrences as the distribution range. The maps were manually checked and evaluated (see Note S3 and Table S9 in Lyu et al., 2022 for details).

fagales

display_name: fagales

pinales

display_name: pinales

species-distribution-model

display_name: species-distribution-model

species-occurrence

display_name: species-occurrence

species-range-map

display_name: species-range-map

species-richness

display_name: species-richness

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Species distribution maps of Fagales and Pinales (GDPlants)


en: precipitation-amount orographic-precipitation climate-change cmip5 air-temperature

en: Data Access

en:
Predicting future climatic conditions at high spatial resolution is essential for many applications in science. Here we present data for monthly time series of precipitation and minimum and maximum temperature for four downscaled global circulation models. We used model output statistics in combination with mechanistic downscaling (the CHELSA algorithm) to calculate mean monthly maximum and minimum temperatures, as well as monthly precipitation sums at ~5km spatial resolution globally for the years 1850-2100. We validated the performance of the downscaling algorithm by comparing model output with observed climates for the years 1950-2069.

CHELSA_cmip5_ts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

orographic-precipitation

display_name: orographic-precipitation

precipitation-amount

display_name: precipitation-amount

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: High resolution monthly precipitation and temperature timeseries for the period 2006-2100


en: urban-ecology sdms snails species-richness-models spiders urbanization birds arthropods insects diversity species-abundance-distributions

en: contains the raw data to perform species distribution models, only for common species

en: contains the raw data to perform the species richness models of the rare species

en: contains the raw data to perform the species richness models of the hypercommon species

en: abundance and occurrence data of the 1446 species studied, used to investigate species-abundance distributions and species-occurrence distributions

en: contains the raw data to perform the species richness models of all species

en:
Richness, site occurrence and abundance data of bees, beetles, birds, hoverflies, net-wingeds, true bugs, snails, spiders, milipides, wasps collected in the city of Zurich using different sampling techniques, and the environmental variables for each sampling site.
Data are provided on request to contact person against bilateral agreement.

arthropods

display_name: arthropods

birds

display_name: birds

diversity

display_name: diversity

insects

display_name: insects

sdms

display_name: sdms

snails

display_name: snails

species-abundance-distributions

display_name: species-abundance-distributions

species-richness-models

display_name: species-richness-models

spiders

display_name: spiders

urban-ecology

display_name: urban-ecology

urbanization

display_name: urbanization

en: Ecological properties of urban ecosystems. Biodiversity dataset of Zurich


en: prevah hydrological-simulations drought-2018 soil-moisture discharge precipitation low-flow

en: Precipitation

en: Simulated precipitation for the 307 medium-sized catchments. The first column provides the date in the format YYYYMMDD. One column corresponds to one catchment. Unit: mm/d.

en: Soil moisture

en: Simulated plant-available soil moisture for the 307 medium-sized catchments. The first column provides the date in the format YYYYMMDD. One column corresponds to one catchment. Unit: mm.

en: Discharge

en: Simulated discharge for the 307 medium-sized catchments. The first column provides the date in the format YYYYMMDD. One column corresponds to one catchment. Unit: mm/d.

en: Low-flow storage

en: Simulated low-flow storage for the 307 medium-sized catchments. The first column provides the date in the format YYYYMMDD. One column corresponds to one catchment. Unit: mm.

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of 307 catchments for which simulations of precipitation, discharge, soil moisture, and low flow are provided. The OBJECTID entry corresponds to the data columns in the textfiles of the simulated data provided.

en: The dataset provides simulated 1) precipitation, 2) discharge, 3) soil moisture, and 4) low-flow simulations for 307 medium-sized catchments in Switzerland for the period 1981-2018. The data were simulated using the hydrological model PREVAH in its gridded-version. The simulated time series are provided at daily resolution. A detailed description of the modeling approach can be found in Brunner et al. 2019 submitted to NHESS.

discharge

display_name: discharge

hydrological-simulations

display_name: hydrological-simulations

low-flow

display_name: low-flow

precipitation

display_name: precipitation

prevah

display_name: prevah

soil-moisture

display_name: soil-moisture

en: Hydro-meteorological simulations for the period 1981-2018 for Switzerland


en: multi-year-drought potential-evapotranspiration chelsa megadrought extreme-events precipitation drought

en: Standardised Precipitation Evapotranspiration Index (SPEI)

en: Global monthly layers of the Standardized Precipitation Evapotranspiration Index (SPEI) a 30 arcsec (~1km) spatial resolution

en: Statistics of the multiyear meteorological droughts, containing the ID, duration, area, and empirical ranking of the droughts.

en: Global annual layers of the multiyear meteorological droughts (MYMD) at a 1/24° (~5km) spatial resolution

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en: Multiyear meteorological droughts (MYMD) statistics - Description

en: Description of column names, and units of the fields contained in the dataset "Multiyear meteorological droughts (MYMD) statistics".

en: Standardized Precipitation Index (SPI)

en: Global monthly layers of the Standardized Precipitation Index (SPI) a 30 arcsec (~1km) spatial resolution

en:
The dataset consists of the standardized precipitation (SPI) and the standardized precipitation evapotranspiration index (SPEI) index with a 30 arcsec (~1km) horizontal resolution.
Data for precipitation rates (pr) and potential evapotranspiration (pet) are taken from CHELSA V2.1 (https://doi.org/10.16904/envidat.228.v2.1). Both data sets are monthly time series from 1980 to 2018 at 30 arcsec. and have the unit of kg m-2 month-1. SPEI is a more reliable measure of drought than SPI as it additionally considers the effect of potential evapotranspiration. Potential evapotranspiration (pet) is the amount of water per area per time that can evaporate at the soil surface or be transpired by plants in absence of water supply limitations. SPEI effectively estimates for a given location how the climatic water balance, i.e., the difference between precipitation rate (pr) and potential evapotranspiration (pet), relates to the long-term mean. Here, pet was calculated with the Penman-Montheith approach, assuming surface conductance of a reference crop of 12 cm height following the definition of the Food and Agriculture Organization of the United Nations (FAO), originating from CHELSA-BIOCLIM+ database (https://www.doi.org/10.16904/envidat.332). To obtain global time series of SPEI, in each pixel the frequency distribution of water balance estimates (pr-pet) is approximated with a log-logistic probability distribution function. We calculate monthly SPEI using a 12-month memory and approximate the parameters of the log-logistic probability distribution based on the time series from 1980-2018. Such a 12-month time window is suitable to capture long-term drought events that are long enough to impose substantial impacts on agriculture, hydrology, and ecosystems while ones at shorter time scales would be more appropriate to detect short-term drought. For each month, SPEI is calculated considering the respective water-balance value and the values of the eleven preceding months. Here we use SPEI-12 in December to represent the overall water-balance condition of the respective year. The resulting SPEI data has a horizontal resolution of 130 arcsec (~1km). The calculation of SPI and SPEI is done in R with the package SPEI (https://www.doi.org/10.32614/CRAN.package.SPEI).

chelsa

display_name: chelsa

drought

display_name: drought

extreme-events

display_name: extreme-events

megadrought

display_name: megadrought

multi-year-drought

display_name: multi-year-drought

potential-evapotranspiration

display_name: potential-evapotranspiration

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: High resolution global standardized drought indices


en: metabarcoding edna fish-composition bayofbiscay atlantic-region actinopterygii teleo chondrichthyes

en: Data access

en:
Environmental DNA complements scientific trawling in surveys of marine fish biodiversity (Dataset 2019)
In October 2019 we chose 15 sites from the 2019 EVHOE survey for eDNA sampling. The French international EVHOE bottom trawl survey is carried out annually during autumn in the BoB to monitor demersal fish resources. At each site, we sampled seawater using Niskin bottles deployed with a circular rosette. There were nine bottles on the rosette, each of them able to hold ∼5 l of water. At each site, we first cleaned the circular rosette and bottles with freshwater, then lowered the rosette (with bottles open) to 5 m above the sea bottom, and finally closed the bottles remotely from the boat. The 45 l of sampled water was transferred to four disposable and sterilized plastic bags of 11.25 l each to perform the filtration on-board in a laboratory dedicated to the processing of eDNA samples. To speed up the filtration process, we used two identical filtration devices, each composed of an Athena® peristaltic pump (Proactive Environmental Products LLC, Bradenton, Florida, USA; nominal flow of 1.0 l min–1 ), a VigiDNA 0.20 μm filtration capsule (SPYGEN, le Bourget du Lac, France), and disposable sterile tubing. Each filtration device filtered the water contained in two plastic bags (22.5 l), which represent two replicates per sampling site. We followed a rigorous protocol to avoid contamination during fieldwork, using disposable gloves and single-use filtration equipment and plastic bags to process each water sample. At the end of each filtration, we emptied the water inside the capsule that we replaced by 80 ml of CL1 conservation buffer and stored the samples at room temperature following the specifications of the manufacturer (SPYGEN, Le Bourget du Lac, France). We processed the eDNA capsules at SPYGEN, following the protocol proposed by Polanco-Fernández et al., (2020). We performed library preparation and sequencing at Fasteris (Geneva, Switzerland). Specifically, we prepared four libraries using the MetaFast protocol (a ligation-based method) and sequenced them separately. We carried out paired-end sequencing using a MiSeq sequencer (2 × 125 bp, Illumina, San Diego, CA, USA) on two MiSeq Flow Cell Kits (v3; Illumina), following the manufacturer’s instructions. We analysed the sequence reads using the OBITools package (http://metabarcoding.org/obitools; Boyer et al., 2016), following the protocol described by Valentini et al. (2016).
Data content:
	* rawdata/: contains the raw reads for each individual sample. One archive contains the paired-end reads specified by the _R1 or _R2 suffix as well as individually tagged PCR replicates (if available) together with an archive containing all extraction and PCR blank samples of the library. Reads have been demultiplexed using cutadapt but not trimmed, individual demultiplexing tags and primers remain present in the sequences.
	* taxadata/: contains the table with all detected taxonomy for each sample after bioinformatic processing (see Polanco et al. 2020 for details; https://doi.org/10.1002/edn3.140) and associated field metadata.
	* metadata/: contains two metadata files, one related to the data collected in the field for each filter, and the second related to the sequencing process in the lab (including the tag sequence, library name, and marker information for each sample)

actinopterygii

display_name: actinopterygii

atlantic-region

display_name: atlantic-region

bayofbiscay

display_name: bayofbiscay

chondrichthyes

display_name: chondrichthyes

edna

display_name: edna

fish-composition

display_name: fish-composition

metabarcoding

display_name: metabarcoding

teleo

display_name: teleo

en: Environmental DNA Marine France Evhoe 2019


en: snow-stratigraphy weisfluhjoch snow-ice-temperature snow-water-equivalent snow-density

en: WFJ Snow Profiles 1999-2014

en:
Biweekly manual snow profiles from Weissfluhjoch, Davos, Switzerland.
Version: 2015-09-14T16:25

en: README

en: README file giving use metadata.

en: Dataset of manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland. Typical snow profile measurements and observations are included (temperature, density, grain size, grain type, hardness, wetness), following the guidelines of the The International Classification for Seasonal Snow on the Ground (ICSSG) [Fierz, C., Armstrong, R.L., Durand, Y., Etchevers, P., Greene, E., McClung, D.M., Nishimura, K., Satyawali, P.K. and Sokratov, S.A. 2009. The International Classification for Seasonal Snow on the Ground. IHP-VII Technical Documents in Hydrology N°83, IACS Contribution N°1, UNESCO-IHP, Paris].

snow-density

display_name: snow-density

snow-ice-temperature

display_name: snow-ice-temperature

snow-stratigraphy

display_name: snow-stratigraphy

snow-water-equivalent

display_name: snow-water-equivalent

weisfluhjoch

display_name: weisfluhjoch

en: Manual bi-weekly snow profiles from Weissfluhjoch, Davos, Switzerland


en: swiss-forest-lab par long-term precipitation relative-humidity climate-change wind-speed temperature meteorology meteo

en: Field station data (NOF)

en: Data file.

en: Data plot of the field station (NOF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site photo of the forest station (NOB)

en: Site photo of the forest station from the side.

en: Site aerial photo (Novaggio)

en: Site aerial photo from both Novaggio stations. Source: Google. 2016. Site aerial photo from both Novaggio stations. Retrieved November 15, 2016, from https://www.google.ch/maps

en: Forest station data (NOB)

en: Site photo of the field station (NOF)

en: Site photo of the field station from the side.

en: Data plot of the forest station (NOB)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Novaggio in Switzerland where one station is located within a natural deciduous forest stand (NOB) with Turkey oak (_Quercus cerris_; 70 yrs), sweet chestnut (_Castanea sativa_; 90 yrs) and silver birch (_Betula pendula_; 70 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Novaggio is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Novaggio, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


en: snow-depth snow-water-equivalent model-calibration-data model-validation-data snow-density

en: swe2hs calibration and validation data

en:
 Contents of this archive

 README.md

 A readme file containing a description of the other files.

 automatic_stations_validation_data.csv

 Daily data from the automatic weather stations used for validation.

 Data sources and providers are listed in the SWE2HS paper, Table 1.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * site_id: code for the measurement site
  - HS_interpolated: boolean flag for interpolated values
  - SWE_interpolated: : boolean flag for interpolated values

 coordinates_swe2hs_paper_stations.csv

 Coordinates of all measurement sites used in the SWE2HS paper.

 Columns:

  * site_id: code for the measurement site
  * location_name: location name of the measurement site
  * lon_[wgs84]: longitude in WGS84
  * lat_[wgs84]: latitude in WGS84
  * elevation_[m]: atitude of the measurement site in [m]
  * dataset: dataset in which the station is included

 manual_station_calibration_data.csv

 Calibration data from the Swiss manual observer stations. Long station records
 trmmed to 15 random water-years.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * SWE_from_profile_[m]: biweekly measurement from the SWE in the measurement
   pit. Corrected with the bulk density in order to match the snow depth from
   the measurement stake. Please refer to the paper for further details.
  * site_id: code for the measurement site

 manual_stations_validation_data.csv

 Validation data from the Swiss manual observer stations. Remaining water-years
 from the long sttaion record not used for the calibration data.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * SWE_from_profile_[m]: biweekly measurement from the SWE in the measurement
   pit. Corrected with the bulk density in order to match the snow depth from
   the measurement stake. Please refer to the paper for further details.
  * site_id: code for the measurement site

 manual_stations_used_deltasnow_parameters.csv

 Site specific DeltaSNOW model parameters used for the calculation of the daily
 SWE series in 'manual_stations_calibration_data.csv' and
 'manual_stations_validation_data.csv'.

 Parameters were optimized by reducing RMSE to the biweekly snow pit SWE measurements.
 Please refer to the paper for further details.

 A python implementation of the DeltaSNOW model was used for the calculation:
 pydeltasnow (https://pypi.org/project/pydeltasnow/)

 For a detailed description of the DeltaSNOW model parameters please see the
 respective publication:

 Winkler, M., Schellander, H., & Gruber, S. (2021). Snow water equivalents
 exclusively from snow depths and their temporal changes: the Δ snow model.
 Hydrology and Earth System Sciences, 25(3), 1165-1187.

 Columns:

  * site_id: code for the measurement site
  * rho_max: Maximum density of an individual snow layer produced by the DeltaSNOW model in [kg/m3]
  * rho_null: Fresh snow density for a newly created layer [kg/m3
  * c_ov: Overburden factor due to fresh snow [-]
  * k_ov: Defines the impact of the individual layer density on the compaction due to overburden [-]
  * k: Exponent of the exponential-law compaction [m3/kg]
  * tau: Uncertainty bound [m]
  * eta_null: Effective compactive viscosity of snow for “zero-density” [Pa s]

en:
The data in this repository was used for the calibration and validation of the
SWE2HS model in the following publication:
Aschauer, J., Michel, A., Jonas, T., & Marty, C. (2023). An empirical model to calculate snow depth from daily snow water equivalent: SWE2HS 1.0. Geoscientific Model Development Discussions, 1-19. https://doi.org/10.5194/gmd-2022-258
Contains daily snow water equivalent and snow depth timeseries from stations in the European Alps.

model-calibration-data

display_name: model-calibration-data

model-validation-data

display_name: model-validation-data

snow-depth

display_name: snow-depth

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: SWE2HS model calibration and validation data


data-set-on-snow-instability

title_for_slug: data-set-on-snow-instability

en: slab-tensile-support slab snow-avalanche crack-propagation snow-stability-evaluation avalanche-forcasting rutschblock failure-initiation weak-layer propgatoin-saw-test

en: Read-me file on snow instability data

en: data set on snow instability

en:
These data on snow instability include three data subsets that were analyzed and the results published by Reuter and Schweizer (2018) who suggest a novel framework on how to describe snow instability by failure initiation, crack propagation and slab tensile support.

Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Reuter, B. and Schweizer, J., 2018. Describing snow instability by failure initiation, crack propagation and slab tensile support. Geophys. Res. Lett., 45, doi: 10.1029/2018GL078069.

avalanche-forcasting

display_name: avalanche-forcasting

crack-propagation

display_name: crack-propagation

failure-initiation

display_name: failure-initiation

propgatoin-saw-test

display_name: propgatoin-saw-test

rutschblock

display_name: rutschblock

slab

display_name: slab

slab-tensile-support

display_name: slab-tensile-support

snow-avalanche

display_name: snow-avalanche

snow-stability-evaluation

display_name: snow-stability-evaluation

weak-layer

display_name: weak-layer

en: Data set on snow instability


en: biodiversity grassland-management disturbance vascular-plant land-use-abandonment

en: Boch et al. - Vegetation records Alpengarten Schynige Platte 2010-2015.xlsx

en: Vegetation records (species lists, percentage cover of species) of a six-year experiment to test whether different land-use treatments affect species diversity and composition in alpine to subalpine graslands.

en: This dataset was used for the publication "Boch, Blaser, Föhr, Küchler, Fischer (2024) Haymaking complemented by moderate disturbances can sustain and restore species-rich alpine to subalpine grasslands" in Alpine Botany. It contains vegetation records (species lists, percentage cover of species) of six grassland sites with each five 2x2 m treatment plots established in the Schynige Platte Alpine Botanical Garden. In a six-year experiment, we tested the response of plant species richness and mean ecological indicator values that we calculated from this dataset, to management treatments ranging from combined haymaking and scraping, to haymaking or scraping alone, to complete abandonment. We further tested whether the treatments led to changes in species composition, i.e. shifts to different vegetation types.

biodiversity

display_name: biodiversity

disturbance

display_name: disturbance

grassland-management

display_name: grassland-management

land-use-abandonment

display_name: land-use-abandonment

vascular-plant

display_name: vascular-plant

en: Schynige Platte Alpine Botanical Garden land-use experiment


en: climate-change snowmelt discharge soil-moisture hydrology precipitation

en: Daily simulated data for the reference period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the reference period 1981-2017 in mm.

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of the 307 medium-sized catchments in Switzerland. The "gridcode" provides the ID of the catchment used in the datafiles.

en: Daily simulated data for the future period

en: Daily simulated discharge, precipitation, snowmelt, and soil moisture for the period 1981-2100 in mm for the 307 catchments.

en:
Daily discharge and the related hydro-meteorological variables precipitation, snowmelt, and soil moisture are provided for current (1981-2017) and for future climate conditions (1981-2100) for 307 medium-sized catchments in Switzerland. The catchments have a median catchment area of 117 km². The 307 catchments together form a set representative of the climatological conditions and runoff characteristics in Switzerland. The four variables were simulated at a daily resolution using the hydrological model PREVAH. PREVAH is a conceptual process-based model that was run in this study in its fully distributed version on a 500 m grid (Viviroli et al. 2009a). For the calibration, runoff time series from 140 mesoscale catchments covering the different runoff regimes were used. The model calibration was conducted over the period 1993-1997. Verification was performed on the period 1983-2005 using (i) volumetric deviation (Viviroli et al. 2007) and (ii) benchmark efficiency (Schäfli et al 2007) as objective functions. The calibration and validation procedures are described in detail in Köplin et al. (2010). The parameters for each model grid cell were derived by regionalizing the parameters obtained for the 140 catchments with a procedure based on ordinary kriging (Viviroli et al. 2009b, Köplin et al. 2010).
The calibrated and validated model was then driven with transient meteorological data (precipitation, temperature, radiation, and wind) representing both reference (1981-2017) and future climate conditions (2018-2099). The data were derived from the CH2018 climate scenarios (NCCS 2018) provided by the Swiss National Centre for Climate Services (NCCS). They were obtained from climate experiments produced with different climate modeling chains, consisting of a global and a regional circulation model each, within EUROCORDEX for three representative concentration pathways (RCP) emission scenarios. Downscaled output of ten climate model chains derived by quantile mapping were considered. The focus was on the chains of the EUR-11 domain with a horizontal resolution of 0.11 degrees (roughly 12.5 km). The climate model chains (GCM, RCM, RCP, and grid resolution) used are listed below:

- ICHEC-EC-EARTH	DMI-HIRHAM5	2.6	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	4.5	EUR-11
- ICHEC-EC-EARTH	DMI-HIRHAM5	8.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	2.6	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	4.5	EUR-11
- ICHEC-EC-EARTH	SMHI-RCA4	8.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	4.5	EUR-11
- MOHC-HadGEM2-ES	SMHI-RCA4	8.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	4.5	EUR-11
- MPI-M-MPI-ESM-LR	SMHI-RCA4	8.5	EUR-11

*References*:

-	Köplin, N., D. Viviroli, B. Schädler, and R. Weingartner (2010), _How does climate change affect mesoscale catchments in Switzerland? - A framework for a comprehensive assessment_, Advances in Geosciences, 27, 111-119, doi:10.5194/adgeo-27-111-2010.
-	National Centre for Climate Services (2018), CH2018 - _Climate Scenarios for Switzerland_, Tech. rep., NCCS, Zurich.
-	Schäfli, B., and H. V. Gupta (2007), _Do Nash values have value?_, Hydrological Processes, 21, 2075-2080, doi:10.1002/hyp.6825.
-	Viviroli, D., J. Gurtz, and M. Zappa (2007), _The hydrological modelling system PREVAH. Part II - Physical model description_, Geographica Bernensia, 40, 1-89.
-	Viviroli, D., M. Zappa, J. Gurtz, and R. Weingartner (2009a), _An introduction to the hydrological modelling system PREVAH and its pre- and post-processing-tools_, Environmental Modelling & Software, 24, 1209-1222, doi:10.1016/j.envsoft.2009.04.001.
-	Viviroli, D., H. Mittelbach, J. Gurtz, and R. Weingartner (2009b), _Continuous simulation for flood estimation in ungauged mesoscale catchments of Switzerland-Part II: Parameter regionalisation and flood estimation results_, Journal of Hydrology, 377 (1), 208-225, doi:10.1016/j.jhydrol.2009.08.022.

climate-change

display_name: climate-change

discharge

display_name: discharge

hydrology

display_name: hydrology

precipitation

display_name: precipitation

snowmelt

display_name: snowmelt

soil-moisture

display_name: soil-moisture

en: Simulated future discharge and climatological variables for medium-sized catchments in Switzerland


en: snow photovoltaic albedo shortwave-radiation winter-energy-production

en: Data Forward Scattering

en: GROUNDEYE model for multiple forward scattering in snow-covered terrain. Meteorological and topographical input data set for the Meierhofertäli near Davos, Switzerland, September 2017 - August 2018. Output data for September 2017 - August 2018 at hourly resolution and every pixel. Post-processing scripts for plotting and analysis.

en:
 Overview
We present GROUNDEYE, a new model of radiative transfer over mountainous terrain, which considers for the first time the forward scattering properties of snow.
Embedded in the surface process model Alpine3D, the new terrain radiation model GROUNDEYE receives interpolated real weather data with diffuse and direct broadband shortwave radiation for each pixel as well as a spatially variable plane albedo from the module SNOWPACK.

 Format
The GROUNDEYE model is written in c++, as is the entire environment of Alpine3d. The input and output data sets are .xlsx or .txt format, pre- and postprocessing including the generation of all figures is in .R format.

 Structure
In Data_Forward_Scattering.zip you will find all necessary data and model details to
reproduce the results of the JGR publication "How forward-scattering snow and terrain change the Alpine radiation balance with application to solar panels"

 - 	Model Input Data contains the meteorological and topographic input data sets, the BRDF, and preprocessing scripts.
 - Model Code contains the full model Alpine3d including the radiative transfer module GROUNDEYE.
 - Model Output Data contains the results of the simulation of terrain irradiance and irradiance of solar panels; hourly resolution, 1. Sptember 2017 - 31. August 2018.
 - Measurements Solar Testsite contains information and measurements of the solar testsite at the Totalp near Davos, Switzerland.
 - Postprocessing contains all R-Scripts used for the analysis and
plotting of the corresponding data.

In each of these folders you will find detailed information in
the file 'About this Folder.txt'.

albedo

display_name: albedo

photovoltaic

display_name: photovoltaic

shortwave-radiation

display_name: shortwave-radiation

snow

display_name: snow

winter-energy-production

display_name: winter-energy-production

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data, Code Link and Metadata on Forward Scattering of Snow at Totalp


en: sentinel-2 switzerland time-series remote-sensing tree-species

en: Tree species profiles for 2020, Green band

en: Tree species profiles for 2020, CIre index

en: Tree species profiles for 2020, EVI index

en: Tree species profiles for 2020, CCI index

en: Tree species profiles for 2019, NDVI index

en: Tree species profiles for 2020, SWIR-1 band

en: Tree species profiles for 2019, NIR band

en: Tree species profiles for 2019, EVI index

en: Tree species profiles for 2019, Red-Edge-2 band

en: Tree species profiles for 2020, Red-Edge-1 band

en: Tree species profiles for 2020, Red-Edge-2 band

en: Tree species profiles for 2019, Red-Edge-1 band

en: Tree species profiles for 2020, Red-Edge-3 band

en: Tree species profiles for 2019, CIre Index

en: Tree species profiles for 2020, Blue band

en: Tree species profiles for 2019, Green band

en: Tree species profiles for 2019, Blue band

en: Tree species profiles for 2019, SWIR-2 band

en: Tree species profiles for 2019, Red-Edge-3 band

en: Tree species profiles for 2019, SWIR-1 band

en: Tree species profiles for 2020, SWIR-2 band

en: Tree species profiles for 2020, NIR band

en: Tree species profiles for 2019, CCI index

en: Tree species profiles for 2019, NDMI/NDWI index

en: Tree species profiles for 2020, NDMI index

en: Tree species profiles for 2020, Red band

en: Tree species profiles for 2020, NDVI index

en: Tree species profiles for 2019, Red band

en:
 Tree species profiles from Sentinel-2 time series
We obtained tree species-specific Sentinel-2 time series for the years 2019 and 2020. The Sentinel-2 time series originated from [here](https://www.envidat.ch/#/metadata/sentinel-2-time-series-of-switzerland), and the tree species information was derived from pure plots of the Swiss National Forest Inventory, spread all over Switzerland.
In addition to the 10 and 20 m bands from Sentinel-2 (Blue, Green, Red, Red-Edge-1, Red-Edge-2, Red-Edge-3, NIR, SWIR-1, SWIR-2), we calculated indices (CCI, CIre, EVI, NDMI/NDWI, NDVI).
In total, tree species profiles of 763 pixels for 2020 and 562 pixels for 2019 are available for seven tree species (*Abies alba*, *Castanea sativa*, *Fagus sylvatica*, *Fraxinus excelsior*, *Larix* spp., *Picea abies*, *Pinus sylvestris*).

remote-sensing

display_name: remote-sensing

switzerland

display_name: switzerland

time-series

display_name: time-series

tree-species

display_name: tree-species


en: source-code snow-modelling snowpack avalanche snowdrift

en:
This dataset includes the FORTRAN code of the FSM2trans model version used in the paper: Quéno et al., Snow redistribution in an intermediate-complexity snow hydrology modelling framework, The Cryosphere, 2024.
The FSM2trans code is derived from the FSM2 model (Essery et al., 2015) and its variant FSM2oshd (Mott et al., 2023). In this model, we implemented and adapted the snowdrift model SnowTran-3D (Liston et al., 2007) and the avalanching model SnowSlide (Bernhardt and Schulz, 2010).
This dataset does not include the processing scripts to prepare meteorological input data for the model, provided as bin files.

avalanche

display_name: avalanche

snow-modelling

display_name: snow-modelling

snowdrift

display_name: snowdrift

snowpack

display_name: snowpack

source-code

display_name: source-code

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: FSM2trans code