en: avalanche-accident-statistics number-of-caught-persons number-of-dead-persons avalanche-fatalities avalanche-accidents

en: Fatal avalanche accidents in Switzerland since 1995-1996

en:
Attention: this data is not updated after 2022 anymore.
This data collection contains information concerning all accidents by snow avalanches causing at least one fatality in Switzerland. The data set commences on 01/10/1995. After the completion of a hydrological year, the new data is added.
The following information is provided:
 * avalanche identifier
 * date of the accident
 * accuracy of the date in range of days before and after
 * canton
 * name of the locality
 * start zone of the avalanche
  * coordinates (Swiss coordinate system, approximately in middle of start zone)
  * accuracy of the coordinates in meters
 * elevation (in meteres above sea level, app. in middle of start zone)
 * slope aspect (main orientation of start zone)
 * slope inclination (in degree, steepest point within start zone)
 * number of dead persons
 * number of caught persons
 * number of fully buried persons
 * forecasted avalanche danger level
 * activity/location of the accident party at the time of the incident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

number-of-caught-persons

display_name: number-of-caught-persons

number-of-dead-persons

display_name: number-of-dead-persons

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: natural-enemies wasps life-history-traits bees hymenoptera cavity-nesting richness urbanization performance-traits cities hymennoptera urban-ecology

state: active

type: dataset

en: Taxonomic metrics on CNBW

en:
The data contains at the site level the species richness of cavity-nesting bees and wasps. It also contains site level estimates of the life-history traits and the performance traits.

We calculated species richness, abundance, and number of nests of the hatched hosts separately for bees and wasps. We calculated the abundance of hatched hosts as the number of brood cells where an individual emerged, i.e. the total number of brood cells minus the number of parasitized cells and the number of cells with no emergence for reasons other than parasitism.

City codes: An =Antwerp, Pa = Paris; Po = Poznan; Ta =Tartu; Zu= Zurich

format: SERVICE

en: Performance traits and life-history traits

en:
It contains the data of two performance traits (survival and parasitism) and two life-history traits (sex ratio and number of offspring per nest for the hosts) at the nest level.

We assessed performance traits, i.e. survival and parasitism, at the individual cell level. Specifically, for each cell within a nest, we noted whether the cell was alive or dead (survival), and whether it had a parasite or not (parasitism). Further, we calculated the parasitism rate as the number of cells with a parasite divided by the total number of cells. Concerning life-history traits, we calculated the total number of brood cells per nest as the total number of brood cells within a single nest, regardless of whether the larvae were dead, alive or parasitized. Finally, we used the probability that a femalehost emerged from a given cell as a proxy for the sex ratio. To do so, we first identified the sex of the individual hosts. Then, we noted it in a binary way to indicate whether the host was a female or not. We could identify the sex of all hatched hosts. Further, because CNBW first lay females and then males, on some occasions we could also identify the host sex in dead and parasitized cells, that is, when we had already identified the sex of the preceding and the following cells.

en: Predictors of the study

media_type: text/csv

format: CSV

en: Taxonomic metrics on the natural enemies

en: It contains the species richness and the abundance of natural enemies per site.

en: Information on the study sites

en: For each site, the IDs, city, coordinates, structure where the trapnest was attached and height is provided

en:
 Background
Urban ecosystems are associated with socio-ecological conditions that can filter and promote taxa. However, the strength of the effect of ecological filtering on biodiversity could vary among biotic and abiotic factors. Here, we provide the data used to investigate the effects of habitat amount, temperature, and host-enemy biotic interactions in shaping communities of cavity-nesting bees and wasps (CNBW) and their natural enemies. To do so, we installed trap-nests in 80 sites distributed along urban intensity gradients in 5 European cities (Antwerp, Paris, Poznan, Tartu and Zurich). We quantified the species richness and abundance of CNBW hosts and their natural enemies, as well as two performance traits (survival and parasitism) and two life-history traits (sex ratio and number of offspring per nest for the hosts).
The dataset contains:
* The taxonomic metrics on CNBW
* The taxonomic metrics on the natural enemies from CNBW
* The life-history traits and performance traits

bees

display_name: bees

cavity-nesting

display_name: cavity-nesting

cities

display_name: cities

hymennoptera

display_name: hymennoptera

hymenoptera

display_name: hymenoptera

life-history-traits

display_name: life-history-traits

natural-enemies

display_name: natural-enemies

performance-traits

display_name: performance-traits

richness

display_name: richness

urban-ecology

display_name: urban-ecology

urbanization

display_name: urbanization

wasps

display_name: wasps

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Community structure, life-history traits and performance traits of urban cavity-nesting bees annd wasps


maintainer: Sebastian Schlögl

en: atmosphere turbulent-sensible-heat-fluxes atmospheric-turbulence snow stable-boundary-layer

en: Turbulence data GR00

media_type: application/zip

en: sensor in 1 m height

format: ZIP

mimetype: application/zip

en: Turbulence data WFJ07

en: upper sensor

en: Turbulence data AA00

en: sensor in 0.2 m height

en: sensor in 25 m height

en: lower sensor

en: Turbulence data PM07

en: SEE

en: Turbulence data WFJ11

en: NWW

en: sensor in 2 m height

en:
We used five different atmospheric turbulence datasets from four test sites, with these sites showing differences in their topographical characteristics. We chose one typical alpine test site with high topographical complexity (Weissfluhjoch, Davos, Switzerland) and three test sites consisting of one glacier site (Plaine Morte, Crans-Montana, Switzerland) and two polar sites (Greenland and Antarctica) representing a quasi-ideal site with homogeneous surface and quasi infinite fetch in all directions.
The turbulent sensible heat flux was calculated using the eddy-covariance method. Note that the sonic temperature fluctuations have been converted into virtual temperature fluctuations.
Three-dimensional wind velocity and air temperature were processed using a linear detrending (Rannik and Vesala, 1999) and a planar fit approach (Massmann and Lee, 2002) to rotate the coordinate system. Air temperature, relative humidity and air pressure from weather stations were used to calculate air properties, which are required for the data processing. The weather stations are located in the immediate vicinity of the turbulence tower and are affected by the same air masses. Turbulence data were averaged to 30-min intervals, whilst changing to a 15-min time interval marginally affects the heat fluxes at the Weissfluhjoch test site (Mott et al., 2011). Note that we define a negative sensible heat flux as being directed towards the snow surface and a positive sensible heat flux as being directed upwards.
The selected datasets and corresponding test sites are briefly introduced below:

Weissfluhjoch 2007 (WFJ07): A vertical set-up of two three-dimensional ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) was used at the traditional field site Weissfluhjoch (2540 m asl.) to measure three-dimensional wind velocity and air temperature at a frequency of 20 Hz. The sensors were mounted 3 m and 5 m above the ground and provided reliable data for 50 days between 11 February 2007 and 24 April 2007. Further information on the field campaign can be found in Stössel et al. (2010) and Mott et al. (2011).

Weissfluhjoch 2011-13 (WFJ11): Three-dimensional wind velocity and air temperature were recorded at 5 m above the ground at a frequency of 10 Hz with a three-dimensional ultrasonic anemometer (CSAT3). The analysis was conducted for data obtained between February and March in the years 2011-13.

Plaine Morte 2007 (PM07): Two three-dimensional ultrasonic anemometers (CSAT3) were installed on a horizontal boom facing opposite directions (west-north-west vs. east-south-east) at 3.75 m above the ground to measure air temperature and three-dimensional wind velocity at 20 Hz. The data were collected at the almost flat field site on the Plaine Morte glacier (2750 m asl.) near Crans-Montana, Switzerland from February to April 2007. High quality meteorological data were additionally recorded and used to force the model. A detailed description about the set-up at the Plaine Morte glacier can be found in Huwald et al. (2009) and Bou-Zeid et al. (2010).

Greenland 2000 (GR00): High-frequency three-dimensional ultrasonic anemometer measurements (CSAT3) were recorded at 50 Hz at the Summit Camp (72.3 °N, 38.8 °W, 3208 m asl.) located on the northern dome of the Greenland ice sheet. Data were collected at 1 m and 2 m above the snow surface during summer in 2000 and 2001. Additionally, meteorological measurements were obtained for the post processing and used to force the model. More information about the field campaign can be found in Cullen et al. (2007, 2014).

Antarctica 2000 (AA00): A set-up of three vertical three-dimensional ultrasonic anemometers (DA-600, Kaijo Denki) were installed at Mizuho Station (70°42' S, 44°20' E, 2230 m asl.) in Eastern Antarctica at 0.2, 1 and 25 m and recorded turbulence data at a frequency of 100 Hz from October to November 2000. Longwave and shortwave radiation, relative humidity, air and snow surface temperature were additionally measured and used to force the model. More information about the field campaign can be found in Nishimura and Nemoto (2005).

atmosphere

display_name: atmosphere

atmospheric-turbulence

display_name: atmospheric-turbulence

snow

display_name: snow

stable-boundary-layer

display_name: stable-boundary-layer

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

en: How do stability corrections perform in the stable boundary layer over snow?


global-cryosphere-watch-data-survey

maintainer: Mathias Bavay

title_for_slug: global-cryosphere-watch-data-survey

en: data-usage data-exchange data-portal gcw automatic-publication

en: Third party data usage

mimetype: text/csv

en: Data interoperability survey

en: Two surveys on the topic of data usage where conducted for the Global Cryosphere Watch data portal. The first one focused on the data provider point of view while the second one focused on the data user point of view. 37 data providers (ie institutions) worldwide provided their answers for the first survey (from fall 2017 until summer 2018) while 54 users (contacted through various mailing list such as the Cryolist) answered the questions on their third party data usage (fall 2019 until January 2020).

automatic-publication

display_name: automatic-publication

data-exchange

display_name: data-exchange

data-portal

display_name: data-portal

data-usage

display_name: data-usage

gcw

display_name: gcw

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Global Cryosphere Watch data survey


weather-station-davos-wolfgang

maintainer: Jörg Wieder

title_for_slug: weather-station-davos-wolfgang

en: temperature weather raclets pressure relative-humidity

en: Weather Station Davos Wolfgang

en: The data file contains date and time (YYYY-MM-DD hh:mm:ss) in UTC, temperature (°C), relative humidity (%), pressure (hPa) at 10 m above ground and above sea level. The data was averaged over 10 minutes.

en: The dataset contains weather parameters measured at Davos Wolfgang (LON: 9.853594, LAT: 46.835577).

pressure

display_name: pressure

raclets

display_name: raclets

relative-humidity

display_name: relative-humidity

temperature

display_name: temperature

weather

display_name: weather


maintainer: EnviDat Support

en: stillberg long-term-experiment treeline afforestation mountain-forest

en: Documentation

en: This data documentation is outdated and has been replaced with an updated version (see description).

mimetype: application/msword

en: Site photo

en: This site photo is outdated and has been replaced with an updated version (see description).

en: Dataset V1

en: This dataset is outdated and has been replaced with an updated version (see description).

format: GDB

en:
 Important
This EnviDat entry is outdated. The most recent, usable version of the data can be found under the new EnviDat entry "Long-term afforestation experiment at the Alpine treeline site Stillberg, Switzerland." The entry can be found under this link <https://www.envidat.ch/dataset/afforestation-stillberg> and with this DOI 10.16904/envidat.397.

afforestation

display_name: afforestation

long-term-experiment

display_name: long-term-experiment

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline

display_name: treeline

en: Long-term treeline research dataset at Stillberg, Davos


maintainer: Esther R. Frei

en: g-tree treeline larix-decidua seedling-recruitment climate-change forest picea-abies stillberg swiss-alps

en: GTREE Website

media_type: text/plain

en: climate data G-TREE experiment, Davos, Switzerland

format: TXT

mimetype: text/plain

en:
 Background information
Climate change-induced range expansion of treeline populations depends on their successful recruitment, which requires dispersal of viable seeds followed by successful establishment of individual propagules. The Global Treeline Range Expansion Experiment (G-TREE) is a global initiative involving researchers from Europe, North America, Australia and New Zealand (Brown et al., 2013). At 15 alpine and Arctic treeline sites worldwide the mechanisms determining the elevational and latitudinal distribution of tree populations are studied using a standardized experimental approach. In summer 2013, a multifactorial seedling recruitment experiment has been established at the Stillberg ecological treeline research site. The aim of this experiment, is to quantify the effect of multiple abiotic and biotic drivers on emergence, survival, and growth of *Larix decidua* and *Picea abies* seedlings in replicated plots along an elevation gradient with three sites below (1930 m a.s.l.), at (2090 m a.s.l.), and above treeline (2410 m a.s.l.; Frei et al., 2018). All plots have been surveyed annually to count seedlings and to measure their total height. Additional environmental factors, such as soil temperature, have been recorded.

 Experimental design
The Stillberg research area is located in the Eastern Swiss Alps near Davos, Switzerland. The site has been used for several long-term monitoring as well as experimental studies for the last four decades. Our G-TREE experiment consists of a lowest site located in a subalpine Larch-Spruce forest (*Larici-Picetum*) dominated by *Larix decidua* and *Picea abies* (1930 m a.s.l.), a transition zone site dominated by alpine shrubs (2100 m a.s.l.), and an uppermost site in an alpine meadow with some dwarf shrubs (2390 m a.s.l.). The three experimental sites were set up following the standard protocol of the global G-TREE initiative (Brown et al., 2013). In a split-plot design, 20 plots (224 cm × 45 cm) were established at each site, which were randomly assigned to the 2 × 2 treatment combinations of the main factors seeding and scarification (i.e. seeding and scarification, seeding only, scarification only, and full control), resulting in five replications per main treatment combination. Each plot was divided into 16 split-plots (22.5 cm × 28 cm), to which treatment combinations of four additional two-level factors species (larch and spruce), provenance (low- and high-elevation), herbivore exclosure (with and without exclosure), and seeding year (2013, 2014) were randomly assigned, which resulted in a total of 960 split-plots (Details see Frei et al. 2018).

 Data description
All plots have been surveyed annually to count seedlings and to measure their total height. Seedling height was assessed with a hand ruler as the total length from the original emerging point to the apical meristem (Details see Frei et al. 2018). Additionally, soil temperature at each site, has been continuously recorded since 2013. Here, we present data from eight years (2013–2021).

climate-change

display_name: climate-change

forest

display_name: forest

g-tree

display_name: g-tree

larix-decidua

display_name: larix-decidua

picea-abies

display_name: picea-abies

seedling-recruitment

display_name: seedling-recruitment

swiss-alps

display_name: swiss-alps

educ

en: Education, culture and sport

en: G-TREE: Global Treeline Range Expansion Experiment Davos, Switzerland


maintainer: Marcia Phillips

en: permos borehole permafrost temperature gemsstock

en: DATASET & PLOTS

en: Data visualiser and download service provided by PERMOS.

en: Map of PERMOS borehole network

en: PERMOS DATA POLICY

media_type: application/pdf

format: PDF

en:
Processed ground temperature measurements at the Gemsstock permafrost borehole in canton Uri, Switzerland. The borehole is located at 2940 m asl on a steep (50°) North-West slope (315°). The surface material is bedrock and borehole depth is 40 m. Thermistors used YSI 44008. Year of drilling 2006. This borehole is part of the Swiss Permafrost network, PERMOS (www.permos.ch). Contact phillips@slf.ch for details of processing applied.

Publications

1. A. Haberkorn, M. Phillips, R. Kenner, H. Rhyner, M. Bavay, S.P. Galos, M. Hoelzle. Thermal regime of rock and its relation to snow cover in steep Alpine rock walls: Gemsstock, central Swiss Alps. 2015. Geografiska Annaler: Series A, Physical Geography. Volume 97. Issue 3. 579–597. http://dx.doi.org/10.1111/geoa.12101. 10.1111/geoa.12101.

2. R. Kenner, M. Phillips, C. Danioth, C. Denier, P. Thee, A. Zgraggen. Investigation of rock and ice loss in a recently deglaciated mountain rock wall using terrestrial laser scanning: Gemsstock, Swiss Alps. 2011. Cold Regions Science and Technology. Volume 67. Issue 3. 157–164. http://dx.doi.org/10.1016/j.coldregions.2011.04.006. 10.1016/j.coldregions.2011.04.006.

borehole

display_name: borehole

gemsstock

display_name: gemsstock

permafrost

display_name: permafrost

permos

display_name: permos

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Processed permafrost borehole data (2940 m asl), Gemsstock, Switzerland


soil-respiration-exclosure-experiment

title_for_slug: soil-respiration-exclosure-experiment

en: ungulates subalpine grassland soil-respiration grazing

en: Soil respiration Switzerland

en:
ID: Fence number

Year	:Year of sampling

mean.CO2: soil respiration measured with PP-systems SRC-1 soil respriation chamber attached to a EGM-4 infrared gas analyser; units CO2 g m-2 h-1

Grassland: Grasslands where fences were errected. Note that on large grasslands (STAB, GRIM, MING) 2 pairs of fences were errected (2 in short, 2 in tall-grass vegetation), on small grasslands (DADA, MARG, BOTS) only one pair of fences was errected (1 short-grass; one-tallgrass vegetation)

Fence: Fence number; un-even numbers on short-grass vegetation (1,3,5,7,9,11,13,15,17), even numbers on tall-grass vegetation (2,4,6,8,10,12,14,16,18)

Vegetation:	1 = shortgrass vegetation, 2 = tall-grass vegetation (9 replicate fences on each vegetation type)

Treatment	: 1 = all herbivores grazing, 2 = large ungulates (red deer, chamois) excluded

format: XLS

en:
Location of data collection
The Swiss National Park (SNP) is located in the southeastern part of Switzerland, and covers an area of 170 km2, 50 km2 of which is forested, 33 km2 is occupied by alpine and 3 km2 by subalpine grasslands. Elevations range from 1350 to 3170 m a.s.l., and mean annual precipitation and temperature are 871 mm and 0.6°C measured at the Park’s weather station in Buffalora (1980 m a.s.l.) between 1960 and 2009 (MeteoSchweiz 2011). Founded in 1914, the SNP received minimal human disturbance for almost 100 years (no hunting, fishing, or camping, visitors are not allowed to leave the trails). Large (> 1 ha) homogeneous patches of short- and tall-grass vegetation characterize the subalpine grasslands. The average vegetation height of short-grass vegetation is 2 to 5 cm. Red fescue (Festuca rubra L.), quaking grass (Briza media L.) and common bent grass (Agrostis tenuis Sipthrob) are the predominating plant species in this vegetation type. Tussocks of evergreen sedge (Carex sempervirens Vill.) and mat grass (Nardus stricta L.) are predominant in the tall-grass vegetation, which averages 20 cm in vegetation height (Schütz and others 2006). Short-grass vegetation developed in areas where cattle and sheep rested (high nutrient input) during agricultural land-use (from 14th century until 1914); tall-grass vegetation developed in areas where cattle and sheep used to graze, but did not rest (Schütz and others 2003, 2006). Herbivores were shown to consume > 60% of the biomass in short-grass compared to < 20% in tall-grass vegetation (Schütz and others 2006). The herbivore community present in the SNP can be divided into four groups based on body size/weight: large [red deer (Cervus elaphus L.) and chamois (Rupricapra rupricapra L.); 30 - 150 kg], medium [marmot (Marmota marmota L.) and snow hare (Lepus timidus L.); 3 – 6 kg], and small vertebrate herbivores (small rodents: e.g. Clethrionomys spp., Microtus spp., Apodemus spp.; 30 – 100 g) as well as invertebrates (e.g. grasshoppers, caterpillars, cicadas, < 5 g).

Experimental design
We selected 18 subalpine grassland sites (9 short-grass, 9 tall-grass vegetation). The sites were spread across the entire park on dolomite parent material at altitudes of 1975 to 2300 meters. At each site we established an exclosure network (fences) in spring 2009 (early June), immediately after snowmelt. Each exclosure network consisted of a total of five 2 × 3 m sized plots that progressively excluded the different herbivores listed above (further labeled according to the herbivore guilds that had access to the respective plots “All”, “Marmot/Mice/Invertebrates”, “Mice/Invertebrates”, “Invertebrates”, “None”). The “All” treatment was thus accessible to all herbivores, was not fenced and was located at least 5 m away from a 2.1 m tall and 7 × 9 m main fence that enclosed the other four treatments. This fence was constructed of 10 × 10 cm wooden posts and electrical equestrian tape (AGRARO ECO, Landi, Bern, Switzerland; 20 mm width) mounted at 0.7 m, 0.95 m, 1.2 m, 1.5 m and 2.1 m above the ground that were connected to a solar charged battery (AGRARO Sunpower S250, Landi, Bern, Switzerland). We also mounted non-electrically charged equestrian tape at 0.5 m to help exclude deer and chamois, yet allow marmots and hares to enter safely. Within each main fenced area we randomly established four 2 × 3 m plots: (1) The “Marmot/Mice/Invertebrates” plot remained unfenced, thus, with the exception of red deer and chamois, all herbivores were able to access the plot, (2) The “Mice/Invertebrates” plot consisted of a 90 cm high electric sheep fence (AGRARO Weidezaunnetz ECO, Landi, Bern, Switzerland; mesh size 10 × 10 cm) connected to the solar panel and excluded all medium sized mammals (marmots, hares), but provided access for small mammals and invertebrates, (3) The “Invertebrates” plot provided access for invertebrates only and was surrounded by 1 m high metal mesh (Hortima AG, Hausen, Schweiz; mesh size 2 × 2 cm), (4) The “None” plot was surrounded by a 1 m tall mosquito net (Sala Ferramenta AG, Biasca, Switzerland; mesh size 1.5 × 2 mm) to exclude all herbivores. This plot was covered with a roof constructed of a wooden frame lined with mosquito mesh that was mounted on the wooden corner posts. We also treated this plot with a biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) when needed to remove insects that might have entered during data collection or that hatched from the soil.

!!! The here published data set only contains data for “All”, and “Marmot/Mice/Invertebrates” (= ungulates excluded) plots !!!

Data collection
In-situ soil CO2 emissions were measured with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA) on two randomly selected locations on one subplot within each of the 90 plots. For each measurement the soil chamber (15 cm high; 10 cm diameter) was placed on a permanently installed PVC collar (10 cm diameter) driven five centimeters into the soil at the beginning of the study (June 2009). The measurements were conducted between 0900 and 1700 hours every two weeks from early to early September 2009, 2010, 2011 and 2013. Freshly germinated plants growing within the PVC collars were removed prior to each measurement to avoid measuring plant respiration/photosynthesis. The two measurements collected per plot every two weeks were averaged.

Please acknowledge the funding of the study: funded by the Swiss National Science Foundation, SNF grant-no 31003A_122009/1 to Anita C. Risch, Martin Schütz and Flurin Filli

grassland

display_name: grassland

grazing

display_name: grazing

soil-respiration

display_name: soil-respiration

subalpine

display_name: subalpine

ungulates

display_name: ungulates

en: Soil respiration - exclosure experiment


en: swiss-forest-lab climate-change temperature relative-humidity precipitation long-term meteorology meteo par wind-speed

en: Site photo of the field station (SCF)

en: Site photo of the field station from above (viewing downwards the slope).

en: Site photo of the forest station (SCB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Site aerial photo (Schänis)

en: Site aerial photo from both Schänis stations. Source: Google. 2016. Site aerial photo from both Schänis stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Field station data (SCF)

en: Data file.

en: Forest station data (SCB)

en: Data plot of the forest station (SCB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Further details on the data repository

en: Meta data documentation.

en: Data plot of the field station (SCF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Schänis in Switzerland where one station is located within a natural mixed forest stand (SCB) with European beech (_Fagus sylvatica_; 130-150 yrs), European silver fir (_Abies alba_; 130-150 yrs) and European ash (_Fraxinus excelsior_; 130-150 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, SCF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Schänis is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Schänis, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1998 onwards


en: dietary-patterns zurich lad-use-chages pollen-metabarcoding bombus-lapidarius bern bumblebees macronutrients basel foraging-behaviour urban bombus-pasquorum rural bees nutrient-intake

en:
The dataset contains the amino acid content and ratios for the two bumblebees. Measures are taken only from pollen from the leg-baskets. SampleID is not the same as in the metabarcoding, several samples from different bumblebees were merged within a Location ,Landscape and Replica. Not for all the samples there is information on both amino acids and fatty acids. The columns are:
- SampleID_chemical: The ID for chemical analyses
- Location: the three Swiss cantons studied. Levels: Bern =BE; Basel = BS; Zurich =ZH
- Landscape: the two typea of human-dominated ecosystems, nested to the Swiss canton. Levels: Urban = U; Rural = R
- Replicate: sampling place (800-m buffer) nested with the location and the landscape. Levels: A-E.
- Bumblebee_species: the two studied species, levels: B.pasquorum; B. lapidarius
- LocationLandscape: Combining location and landscape
- Asp, Thr, ..., Arg: Content of individual amino acids. Amino acids are written as abbreviated names. FUll names be checked here: https://en.wikipedia.org/wiki/Amino_acid
- sum: total sum of amino acid content (mg)
- sumessential: total sum essential amino acids (mg)
-sumnon-essential: total sum non-essential amino acids (mg)
- proportionnonessentialessential: proportion between essential and non-essential amino acids.

en:
The dataset contains the plant trait values obtined from published sources. It contains:
- Kingddom: taxonomic
- Phylum: taxonomic
- Order: taxonomic
- Family: taxonomic
- Genus: taxonomic
- Species: species name
- plant.species: full scientific name
- native_exotic: origin status. As presented in https://www.doi.org/10.16904/envidat.210
- pollination mode: vector of pollination. As presented in https://www.doi.org/10.16904/envidat.210
- Flowering_months_duration: Number of flowering months. As presented in https://www.doi.org/10.16904/envidat.210
- start_flowering: month of the starting of the flowering. As presented in https://www.doi.org/10.16904/envidat.210
- growth_form_category: plant growth form. As presented in https://www.doi.org/10.16904/envidat.210
- plant-height: plant heght in meters. As presented in https://www.doi.org/10.16904/envidat.210
- inflorescence: Logic, plant with single flowers (0) or inflorescences (1). As presented in https://www.doi.org/10.16904/envidat.210
- structural_blossom_class: depicting the accessibility of the flowers. As presented in https://www.doi.org/10.16904/envidat.210
- symmetry: floral symmetry. As presented in https://www.doi.org/10.16904/envidat.210
- nectar: logic, nectar present. As presented in https://www.doi.org/10.16904/envidat.210
- pollen: logic, pollen rewards present. As presented in https://www.doi.org/10.16904/envidat.210
- oil: logic. oil present. As presented in https://www.doi.org/10.16904/envidat.210
- sugar.concentration: the amount of sugar present in the nectar, in mg.
Additional information can be found in https://doi.org/10.1016/j.dib.2021.107243

en:
Processed data. The dataset contains the plant species richness in the leg-baskets per bumblebee individual. It contains:
- SampleID: Combining bumblebee ID, location, landscape and replica
- Location: canton, levels: Bern =BE; Basel = BS; Zurich =ZH
- Landscape: landscape type, levels: Urban = U; Rural = R
- Replicate: sampling place (800-m buffer) within location and landscape. Levels: A-E.
- LocationLandscape: combining location and landscape
- Bumblebee_species: the two studied species, levels: B.pasquorum; B. lapidarius
- Plant species richness: the number of plant species found in the pollen of the leg-baskets.

en:
Processed data. The dataset contains the functional diversity metrics based on the plant composition from the leg-baskets per bumblebee individual. It contains:
- SampleID: Combining bumblebee ID, location, landscape and replica
- Location: canton, levels: Bern =BE; Basel = BS; Zurich =ZH
- Landscape: landscape type, levels: Urban = U; Rural = R
- Replicate: sampling place (800-m buffer) within location and landscape. Levels: A-E.
- LocationLandscape: combining location and landscape
- Bumblebee_species: the two studied species, levels: B.pasquorum; B. lapidarius
- Fric.w: Weighted functional richness
-Fric: functional richness
-FEve.w: Weighted functional evenness
- FEve: functional evenness
- FDiv.w: weighted functional divergence
- FDiv: functional divergence

en:
The dataset contains the information on the 16 study sites:
- Location: the three Swiss cantons studied. Levels: Bern =BE; Basel = BS; Zurich =ZH
- Landscape: the two typea of human-dominated ecosystems, nested to the Swiss canton. Levels: Urban = U; Rural = R
- Replicate: sampling place (800-m buffer) nested with the location and the landscape. Levels: A-E.
- Site_ID: combination of location, landscape and replicate
- X: X coordinate, WGS84
- Y: Y coordinate WGS84
- Plant S in landscape: Plant species richness within the 800 m calculated using both information from the Global Biodiversity Information. Facility (GBIF) and InfoFlora (www.infoflora.ch).
- % Buildings: the proportion of buildings and other impervious surfaces within 800 m radius.
- % Agricultural: the proportion of agricultural land and other impervious surfaces within 800 m radius.
- % Water: the proportion of water and other impervious surfaces within 800 m radius.
- % Meadows & grasslands: the proportion of meadows and grasslands and other impervious surfaces within 800 m radius.
The raw metabarcoding data is archived in NCBI project PRJNA1137320.

en:
Processed data. The dataset contains the phylogeneitc diversity metrics based on the plant composition from the leg-baskets per bumblebee individual. It contains:
- SampleID: Combining bumblebee ID, location, landscape and replica
- Location: canton, levels: Bern =BE; Basel = BS; Zurich =ZH
- Landscape: landscape type, levels: Urban = U; Rural = R
- Replicate: sampling place (800-m buffer) within location and landscape. Levels: A-E.
- LocationLandscape: combining location and landscape
- Bumblebee_species: the two studied species, levels: B.pasquorum; B. lapidarius
- PVar: phylogenetic variance
- PRic: Phylogenetic richness
- PEve: Phylogenetic evenness
- PClu: Phylogenetic clustering

en:
The dataset contains the fatty acid content and ratios for the two bumblebees. Measures are taken only from pollen from the leg-baskets. SampleID is not the same as in the metabarcoding, several samples from different bumblebees were merged within a Location ,Landscape and Replica. Not for all the samples there is information on both amino acids and fatty acids. The columns are:
- SampleID_chemical: The ID for chemical analyses
- Location: the three Swiss cantons studied. Levels: Bern =BE; Basel = BS; Zurich =ZH
- Landscape: the two typea of human-dominated ecosystems, nested to the Swiss canton. Levels: Urban = U; Rural = R
- Replicate: sampling place (800-m buffer) nested with the location and the landscape. Levels: A-E.
- Bumblebee_species: the two studied species, levels: B.pasquorum; B. lapidarius
- LocationLandscape: combination between location and landscape
- Caprylic, Pelargonic, ..., Lacceroic: Content of individual fatty acids acids.
- sum: total sum of fatty acid content (mg)
- unsaturatedsum: total sum unsaturated fatty acids (mg)
- saturatedsum: total sum saturated fatty acids (mg)
- omega3sum: total sum Omega 3 fatty acids (mg)
- omega6sum: total sum Omega 6 fatty acids (mg)
- omega9sum: total sum Omega 9 fatty acids (mg)
- omega6to3ratio: ratio Omega 6 to Omega3 fatty acids
-saturatedtounsaturatedration: ratio between saturated and unsaturated fatty acids

en:
The dataset contains the filtered plant composition1 (removing species with too low relative abundances) and the relative abundance obtained from DNA metabarcoding on pollen samples for both the leg-baskets and the body. The dataset contains the following columns:
- SampleID: Combining bumblebee ID, location, landscape and replica
- Abundance: numeric, relative abundance
- BumblebeeID: numerical ID for each bumblebee individual within a location, landscape and replicate sampling place.
- Location: canton, levels: Bern =BE; Basel = BS; Zurich =ZH
- Landscape: landscape type, levels: Urban = U; Rural = R
- Replicate: sampling place (800-m buffer) within location and landscape. Levels: A-E.
- LocationLandscape:
- Bumblebee_species: the two studied species, levels: B.pasquorum; B. lapidarius
- Transportation_structure: bumblebee pollen transportation structure, levels: B = Body; L = leg-baskets (i.e. corbicula)
- Kingddom: taxonomic
- Phylum: taxonomic
- Order: taxonomic
- Family: taxonomic
- Genus: taxonomic
- Species: plant sicentific name
-Binomial_abundance: Logic, indicating if the plant species is included (1).
The raw metabarcoding data is archived in NCBI project PRJNA1137320

en:
Data on the diet of urban and rural bumblebees individuals, Bombus lapidarius and Bombus pascuorum, collected in Switzerland (cantons Bern, Basel and Zürich) obtained using metabarconding and chemical analyses from two pollen transportation structures, that is, the body and the leg-baskets (i.e., corbicula). The bumblebees were collected by Egenberger et al., 2019 (https://doi.org/10.5061/dryad.qt8mr4v)
The data contains:
- The composition and relartive abundance of plant species in the body and the leg-baskets, separately.
- The content and ratios of two groups of macronutrients, that is, amino acids and fatty acids.
The dataset contains the data used in the paper "Urban bumblebees diversify their foraging strategy to maintain nutrient intake" as well as unpublished data.

basel

display_name: basel

bees

display_name: bees

bern

display_name: bern

bombus-lapidarius

display_name: bombus-lapidarius

bombus-pasquorum

display_name: bombus-pasquorum

bumblebees

display_name: bumblebees

dietary-patterns

display_name: dietary-patterns

foraging-behaviour

display_name: foraging-behaviour

lad-use-chages

display_name: lad-use-chages

macronutrients

display_name: macronutrients

nutrient-intake

display_name: nutrient-intake

pollen-metabarcoding

display_name: pollen-metabarcoding

rural

display_name: rural

urban

display_name: urban

zurich

display_name: zurich

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: catchment-data snowpack snow-hydrology rain-on-snow meteorological-data

en: The file contains all data needed to run simulations with the snow cover model SNOWPACK.

en: Meteorological data used to run SNOWPACK for 58 catchments in the Swiss Alps. The data consists of a 2 km grid of "virtual meteorological stations" for each catchment. It was used to simulate snow cover processes during rain-on-snow events, therefore meteorological data of each catchment contains at least one rain-on-snow event. Further information can be found in the attached readme.txt and in Würzer & Jonas et al. (2017), currently under review in Hydrological Processes.

catchment-data

display_name: catchment-data

meteorological-data

display_name: meteorological-data

rain-on-snow

display_name: rain-on-snow

snow-hydrology

display_name: snow-hydrology

snowpack

display_name: snowpack

en: Meteorological data for investigation of rain-on-snow events in 58 catchments in Switzerland


en: microbial-biodiversity beta-diversity soil-respiration microbial-respiration ecosystem-functions

en: Bacterial amplicon sequencing

en: Bacterial ASVs and taxonomic tables

en: Microbial functions and metadata

en: Extracellular enzyme activities, respiration and sites metadata

en: Fungal amplicon sequencing

en: Fungal ASVs and taxonomic tables

en: Structural and functional changes of microbial communities in ephemeral stream sediments and adjacent soils between was assessed in an artificial newly created catchment at 3 and 13 years after catchment construction. Bacterial and fungal communities, respiration and extracellular enzyme activities were assessed.

beta-diversity

display_name: beta-diversity

ecosystem-functions

display_name: ecosystem-functions

microbial-biodiversity

display_name: microbial-biodiversity

microbial-respiration

display_name: microbial-respiration

soil-respiration

display_name: soil-respiration

en: Chicken Creek 10 years


intratrait

maintainer: Christian Rixen

title_for_slug: intratrait

en: elevation-range plant-traits elevation-gradient climate-change cold-adapted-plants neighbour-interactions

en: Plant trait data along elevation gradients on mountains

en:
This data set was used to test whether species specialized to high elevations or with narrow elevational ranges show more conservative (i.e. less variable) trait responses across their elevational distribution, or in response to neighbours, than species from lower elevations or with wider elevational ranges. We did so by studying intraspecific trait variation of 66 species along 40 elevational gradients in four countries (Switzerland, Australia, New Zealand, China) in both hemispheres. As an indication of potential neighbour interactions that could drive trait variation, we also analysed plant species’ height ratio, its height relative to its nearest neighbour.
The following traits and parameters were measured and are available in this data set:
As an indication of plant stature, we measured vegetative and generative height, where vegetative height was distance from soil to highest vegetative leaf and generative height was distance to the highest point on the reproductive shoot. As a measure of reproductive investment, we noted the presence of flowers on the randomly chosen individuals (see below). As a measure of individual and genet basal area, we measured individual plant and patch diameters, in two dimensions (along the largest diameter and perpendicular to it). In clonal plant species, plant diameter was equivalent to an individual rosette, whereas patch diameter referred to the whole genet and could represent the size of a tuft, tussock or cushion. For genera with more singular growth forms (e.g., some Gentiana species) plant and patch diameter were the same. The two diameter measurements were made at right angles, allowing estimates of patch and plant areas to be calculated as an ellipse (i.e., area = 0.5 a 0.5 b Π). All traits were measured on ten randomly selected individuals per site. Flower count data was considered in a binary fashion on a per individual basis (because for some species individuals only produce one flower when flowering) so that the presence or absence of flower(s) was a nominal value between 0 and 10 for each species at each site. We then collected at least three leaves (up to 30 for small and light leaves) from each of the first three individuals selected from each species for determination of leaf dry matter content (LDMC) and specific leaf area (SLA). For calculations of LDMC and SLA, fresh leaves were scanned on a flatbed scanner to determine leaf area. Leaves were then weighed on a balance to a precision of +/- 0.001g, prior to being air dried and reweighed with a balance to a precision of +/- 0.0001g. LDMC was calculated by dividing dry leaf mass by fresh leaf mass. SLA was calculated by dividing leaf area by dry leaf mass. Additionally, within an area of 10 cm diameter around the target individual, we determined the tallest neighbouring species and measured its vegetative and generative height, and estimated the percent cover of the target species, other vegetation, rock, and bare soil.
For more details see Rixen et al. 2022, Journal of Ecology.

climate-change

display_name: climate-change

cold-adapted-plants

display_name: cold-adapted-plants

elevation-gradient

display_name: elevation-gradient

elevation-range

display_name: elevation-range

neighbour-interactions

display_name: neighbour-interactions

plant-traits

display_name: plant-traits

en: intratrait


en: scenarios land-change pathways agriculture land-use-modelling

en: This dataset contains the spatial layers showing future land change pathways in Europe between 2015 and 2050, as simulated by the CLUMondo model according to the Agricultural Futures Framework (AFF) scenarios.

en:
Disclaimer: this dataset is made available for peer-reviewing purposes only, Please do not use it for any other purpose.

This dataset contains the spatial layers showing future land change pathways in Europe between 2015 and 2050, as simulated by the CLUMondo model and according to the Agricultural Futures Framework (AFF) scenarios.

Three scenarios are included:
- Land for Food and Land for Nature (LFLN)
- Land as Culture (LaC)
- Land for Society (LfS)

agriculture

display_name: agriculture

land-change

display_name: land-change

land-use-modelling

display_name: land-use-modelling

pathways

display_name: pathways

scenarios

display_name: scenarios

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: AFF agricultural land change scenarios in Europe 2015-2050


maintainer: Amelie Fees

en: snowpack-simulation time-lapse-photography avalanche avalanche-activity glide-snow-avalanche

en: README

en: README.txt explaining the dataset and columns of tables in more detail.

en: Glide distances for opening glide-cracks

en: This folder contains all glide-cracks where glide-distances were extracted from time-lapse photographs. Glide-distances were calculated in x-direction (width) and y-direction (downslope, length) by georeferencing the images.

en: Glide-snow avalanche activity

en: Table that contains all glide-snow avalanche events that were detected in time-lapse photographs (season 2008/09 to 2021/22). The columns are explained in the README.txt

en: SNOWPACK simulations

en: SNOWPACK simulations (.pro and .smet) covering season 2008/09 to 2021/22 at 10 virtual locations on Dorfberg. The locations correspond to the most common glide-snow avalanche paths.

en:
This dataset includes the processed data of the glide-snow avalanche activity and dynamics on Dorfberg (Davos, Switzerland) covering seasons 2008/09 to 2021/22. This dataset was described in the research article:

Fees, A., van Herwijnen A., Altenbach, M., Lombardo, M., Schweizer, J.: Glide-snow avalanche characteristics at different time-scales extracted from time-lapse photography, Annals of Glaciology, 91

We extracted the dynamics of opening glide-cracks and the glide-snow avalanche activity from time-lapse photographs. Glide-snow avalanches were separated into surface and interface events using the liquid water content which was simulated with SNOWPACK at 10 virtual stations on Dorfberg.

avalanche

display_name: avalanche

avalanche-activity

display_name: avalanche-activity

glide-snow-avalanche

display_name: glide-snow-avalanche

snowpack-simulation

display_name: snowpack-simulation

time-lapse-photography

display_name: time-lapse-photography

en: Glide-snow avalanche activity on Dorfberg, Davos, Switzerland


en: model-validation-data snow-water-equivalent model-calibration-data snow-density snow-depth

en: swe2hs calibration and validation data

en:
 Contents of this archive

 README.md

 A readme file containing a description of the other files.

 automatic_stations_validation_data.csv

 Daily data from the automatic weather stations used for validation.

 Data sources and providers are listed in the SWE2HS paper, Table 1.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * site_id: code for the measurement site
  - HS_interpolated: boolean flag for interpolated values
  - SWE_interpolated: : boolean flag for interpolated values

 coordinates_swe2hs_paper_stations.csv

 Coordinates of all measurement sites used in the SWE2HS paper.

 Columns:

  * site_id: code for the measurement site
  * location_name: location name of the measurement site
  * lon_[wgs84]: longitude in WGS84
  * lat_[wgs84]: latitude in WGS84
  * elevation_[m]: atitude of the measurement site in [m]
  * dataset: dataset in which the station is included

 manual_station_calibration_data.csv

 Calibration data from the Swiss manual observer stations. Long station records
 trmmed to 15 random water-years.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * SWE_from_profile_[m]: biweekly measurement from the SWE in the measurement
   pit. Corrected with the bulk density in order to match the snow depth from
   the measurement stake. Please refer to the paper for further details.
  * site_id: code for the measurement site

 manual_stations_validation_data.csv

 Validation data from the Swiss manual observer stations. Remaining water-years
 from the long sttaion record not used for the calibration data.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * SWE_from_profile_[m]: biweekly measurement from the SWE in the measurement
   pit. Corrected with the bulk density in order to match the snow depth from
   the measurement stake. Please refer to the paper for further details.
  * site_id: code for the measurement site

 manual_stations_used_deltasnow_parameters.csv

 Site specific DeltaSNOW model parameters used for the calculation of the daily
 SWE series in 'manual_stations_calibration_data.csv' and
 'manual_stations_validation_data.csv'.

 Parameters were optimized by reducing RMSE to the biweekly snow pit SWE measurements.
 Please refer to the paper for further details.

 A python implementation of the DeltaSNOW model was used for the calculation:
 pydeltasnow (https://pypi.org/project/pydeltasnow/)

 For a detailed description of the DeltaSNOW model parameters please see the
 respective publication:

 Winkler, M., Schellander, H., & Gruber, S. (2021). Snow water equivalents
 exclusively from snow depths and their temporal changes: the Δ snow model.
 Hydrology and Earth System Sciences, 25(3), 1165-1187.

 Columns:

  * site_id: code for the measurement site
  * rho_max: Maximum density of an individual snow layer produced by the DeltaSNOW model in [kg/m3]
  * rho_null: Fresh snow density for a newly created layer [kg/m3
  * c_ov: Overburden factor due to fresh snow [-]
  * k_ov: Defines the impact of the individual layer density on the compaction due to overburden [-]
  * k: Exponent of the exponential-law compaction [m3/kg]
  * tau: Uncertainty bound [m]
  * eta_null: Effective compactive viscosity of snow for “zero-density” [Pa s]

en:
The data in this repository was used for the calibration and validation of the
SWE2HS model in the following publication:
Aschauer, J., Michel, A., Jonas, T., & Marty, C. (2023). An empirical model to calculate snow depth from daily snow water equivalent: SWE2HS 1.0. Geoscientific Model Development Discussions, 1-19. https://doi.org/10.5194/gmd-2022-258
Contains daily snow water equivalent and snow depth timeseries from stations in the European Alps.

model-calibration-data

display_name: model-calibration-data

model-validation-data

display_name: model-validation-data

snow-density

display_name: snow-density

snow-depth

display_name: snow-depth

snow-water-equivalent

display_name: snow-water-equivalent

en: SWE2HS model calibration and validation data


maintainer: Armin Sigmund

en: lagrangian-analysis snow-sublimation isotopic-distillation backward-trajectories stable-water-isotopes antarctica evaporation

en: Readme

en: Meta data

en: Data

en: Modeled data including the data shown in the figures of the related research article

en: Python scripts for data visualization

en: Scripts for generating the figures of the related research article and generating the data files (csv) from the model output

en: Model code

en: Model Sublimation and Model Air Parcel (python scripts)

en:
 Summary

This data set contains Python programming code and modeled data discussed in a related research article. We developed a simple isotope model to study the drivers of the particularly depleted vapour isotopic composition measured on the ship of the Antarctic Circumnavigation Expedition close to the outlet of the Mertz glacier, East Antarctica, in the 6-day period from 27 January 2017 to 1 February 2017. The model considers the stable water isotopologues H2(16O), H2(18O), and HD(16O). It uses data from the ERA5 reanalysis product with a spatial resolution of 0.25° x 0.25° (Hersbach et al., 2018) and 10-day backward trajectories for the location of the ship, published by Thurnherr et al. (2020a). Our data set includes the model code, Python scripts for visualizing the results, and data produced by the model including the results shown in the figures of the related research article. Here, we summarize the most important model characteristics while further details can be found in the readme.txt file and the related research article including its supporting information.

 Main model characteristics

The modeling approach consists of two steps called *Model Sublimation* and *Model Air Parcel*. The former estimates the isotopic compositions of the snow and sublimation flux across the Antarctic Ice Sheet using an Eulerian frame of reference while the latter models the vapour isotopic composition and specific humidity along air parcel trajectories using a Lagrangian frame of reference. The isotope effects of most phase changes are represented by equilibrium fractionation. Only for ocean evaporation, kinetic fractionation is additionally taken into account (original Craig-Gordon formula). For snow sublimation, two assumptions are tested: *Run E* assumes that sublimation is associated with equilibrium fractionation while *Run N* assumes that sublimation occurs without isotopic fractionation.

 Model Sublimation
Model Sublimation uses a simple one-dimensional mass-balance approach in each grid cell, considering snow accumulation due to snowfall and vapour deposition and snow ablation due to sublimation. The snowpack is represented by 100 layers of equal thickness (e.g., 1 cm) and density (350 kg m-3). The isotopic composition of snowfall is parameterized by generalizing a site-specific, empirical relationship between the daily mean air temperature and snowfall isotopic composition. In the case of vapour deposition, Model Sublimation assumes equilibrium fractionation and estimates the isotopic composition of the atmospheric vapour as the average value for two idealized situations: (i) locally sourced vapour which has the same isotopic composition as the sublimation flux; (ii) non-locally sourced vapour in isotopic equilibrium with snowfall. Model Sublimation is run with a time step of 1 h, independently of Model Air Parcel.

 Model Air Parcel
Every hour, an ensemble of trajectories arrives at different heights in the ABL above the ship. For each of these trajectories, we consider an air parcel with a constant volume of 1 x 1 x 1 m3. The air parcels are initialized at the first suitable time when the trajectories are located in the ABL, either over the ice-free ocean in conditions of evaporation or over snow (Antarctic Ice Sheet or sea ice). Subsequently, the masses of the water isotopologues in the air parcels are simulated with a time step of 3 h, considering vapour uptake or removal due to the moisture flux at the snow or liquid ocean surface (only if the parcel is in the ABL) and cloud/precipitation formation (if the saturation specific humidity is reached). Sea ice is taken into account in a very simplified way. We represent the sea ice by grid cells with a sea-ice cover of more than 90% and assume the isotopic composition of the sublimation flux to be identical to that in the nearest grid cell of the Antarctic Ice Sheet. The isotopic composition of the sublimation flux is taken from Model Sublimation whereas the isotopic composition of the vapour deposition flux (over snow) and condensation flux (over ice-free ocean) is simulated assuming an isotopic equilibrium with the air parcel. Isotope effects of cloud/precipitation formation are represented using the classic Rayleigh distillation model with equilibrium fractionation, where the cloud water is assumed to precipitate immediately after formation.

 References

Hersbach, H., Bell, B., Berrisford, P., Biavati, G., Horanyi, A., Munoz Sabater, J.,... others (2018). *ERA5 hourly data on single levels from 1979 to present. Copernicus Climate Change Service (C3S) Climate Data Store (CDS)*. doi: 10.24381/cds.bd0915c6

Thurnherr, I., Wernli, H., & Aemisegger, F. (2020a). *10-day backward trajectories from ECMWF analysis data along the ship track of the Antarctic Circumnavigation Expedition in austral summer 2016/2017*. Zenodo. doi: 10.5281/zenodo.4031705

antarctica

display_name: antarctica

backward-trajectories

display_name: backward-trajectories

evaporation

display_name: evaporation

isotopic-distillation

display_name: isotopic-distillation

lagrangian-analysis

display_name: lagrangian-analysis

snow-sublimation

display_name: snow-sublimation

stable-water-isotopes

display_name: stable-water-isotopes

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Modeled Isotopic Composition of Water Vapour Along Air Parcel Trajectories in the Antarctic


en: streamflow precipitation rainfall-runoff-modelling hydrology time-series nonlinear-deconvolution ecohydrology nonstationarity

en: Zip-compressed folder containing two versions of the ERRA script. ERRA_v1.0.R uses Rcpp to speed up several key calculations, but requires a C++ compiler. ERRA_v1.0_no_Rcpp.R is a bit slower but does not require a C++ compiler or Rcpp. Public use of these scripts is permitted under GNU General Public License 3 (GPL3); for details see <https://www.gnu.org/licenses/>

en: Demonstration scripts.zip

en: Zip-compressed folder containing demonstration scripts, source data, and output files for the ERRA results shown in "Introduction to ERRA" and in J.W. Kirchner, "Characterizing nonlinear, nonstationary, and heterogeneous hydrologic behavior using Ensemble Rainfall-Runoff Analysis (ERRA): proof of concept", Hydrology and Earth System Sciences, 2024.

en: An introduction to ERRA.pdf

en: "An introduction to ERRA" presents a series of vignettes that introduce some of the capabilities of the Ensemble Rainfall-Runoff Analysis (ERRA) script, and that show how to invoke them. This introduction also includes documentation for ERRA function calls, largely reproducing the documentation embedded in the ERRA script itself.

en:
ERRA is a data-driven, nonparametric, model-independent method for quantifying rainfall-runoff relationships across a spectrum of time lags, in systems that may be nonlinear, nonstationary, and spatially heterogeneous.
Researchers using ERRA in published work should cite J.W. Kirchner, "Characterizing nonlinear, nonstationary, and heterogeneous hydrologic behavior using Ensemble Rainfall-Runoff Analysis (ERRA): proof of concept", Hydrology and Earth System Sciences, 2024 (for ERRA itself) and J.W. Kirchner, "Impulse response functions for nonlinear, nonstationary, and heterogeneous systems, estimated by deconvolution and de-mixing of noisy time series", Sensors, 22(9), 3291, https://doi.org/10.3390/s22093291, 2022 (for the underlying mathematics).
This data set includes two versions of the ERRA script written in the open-source programming language R, a detailed user's guide, and sample scripts and source data for all of the results in Kirchner (2024).
These scripts are made publicly available under GNU General Public License 3; for details see https://www.gnu.org/licenses/. The data and documentation are made available under Creative Commons Attribution Share-Alike CC-BY-SA.
ETH Zurich, WSL, and James Kirchner make ABSOLUTELY NO WARRANTIES OF ANY KIND, including NO WARRANTIES, expressed or implied, that this software is free of errors or is suitable for any particular purpose. Users are solely responsible for determining the suitability and reliability of this software for their own purposes.

ecohydrology

display_name: ecohydrology

hydrology

display_name: hydrology

nonlinear-deconvolution

display_name: nonlinear-deconvolution

nonstationarity

display_name: nonstationarity

precipitation

display_name: precipitation

rainfall-runoff-modelling

display_name: rainfall-runoff-modelling

streamflow

display_name: streamflow

time-series

display_name: time-series

en: ERRA -- an R script for Ensemble Rainfall-Runoff Analysis


historical-vegetation-height-model-nfi

title_for_slug: historical-vegetation-height-model-nfi

en: photogrammetry vhm dsm nfi forest historical

en: 1985-1991 Vegetation Height Model

format: GeoTIFF

en: 1979-1985 Vegetation Height Model

en: Description of available data

en: 1990-1998 Vegetation Height Model

en: 1998-2006 Vegetation Height Model

en:
The main datasets available are 4 nationwide **Digital Surface Models (DSMs)** and corresponding **Vegetation Height Models (VHMs)** with a spatial resolution of 1 m.
The Vegetation Height Models are calculated by subtraction of a Digital Terrain Model (swissAlti3d version 2017, swisstopo) from the generated DSMs. DSMs were derived by image matching of **scanned historical images** (panchromatic 8-bit) acquired with a RC10 frame camera, in the context of the swisswide image acquisition campaigns of swisstopo.
Nationwide products could be generated for the **four epochs**
 1979-1985 / 1985-1991 / 1990-1998 / 1998-2006.
Additional information about successful image matching vs. interpolation of pixels and about the year of image acquisition are available in the corresponding files (**matched_area_xxxx_xxxx_binay.tif** and **meta_acquisition_year_xxxx_xxxx.json**, respectively).
To separate vegetation from non-vegetation areas a mask derived from a combination of information of the Topographic landscape model - TLM (swisstopo) and a NDVI layer was used and is supplied as **"TLM_mask.tif"**
Due to the occurrence of unrealistic vegetation height values caused by the failure of the image matching process (mainly overexposed images and clouds or very steep rocky terrain), pixel values > 60 m were set to NoData and < 0 m to 0.
All datasets are available in the Reference System **LV95 (EPSG: 2056) LN02 (EPSG: 5728)** and share the common **extent definition** (xmin ymin xmax ymax): 2480000 1070000 2840000 1300000

dsm

display_name: dsm

forest

display_name: forest

historical

display_name: historical

nfi

display_name: nfi

photogrammetry

display_name: photogrammetry

vhm

display_name: vhm

en: Historical Vegetation Height Model NFI


maintainer: Matthias Haeni

en: relative-humidity wind-speed swiss-forest-lab precipitation temperature meteorology long-term meteo climate-change par

en: Data plot of the forest station (BTB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

mimetype: application/pdf

en: Field station data (BTF)

en: Data file.

en: Site aerial photo (Bettlachstock)

en: Site aerial photo from both Bettlachstock stations. Source: Google. 2016. Site aerial photo from both Bettlachstock stations. Retrieved November 11, 2016, from https://www.google.ch/maps

mimetype: image/jpeg

en: Site photo of the field station (BTF)

en: Site photo of the field station from the side.

en: Site photo of the forest station (BTB)

en: Site photo of the forest station from the side.

en: Data plot of the field station (BTF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Bettlachstock in Switzerland where one station is located within a natural mixed forest stand (BTB) with European beech (_Fagus sylvatica_; 170-190 yrs), European silver fir (_Abies alba_; 190 yrs) and Norway spruce (_Picea abies_; 200 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BTF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Bettlachstock is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Bettlachstock, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: plant-species uetliberg occurrence flora-change zurich

en:
The list gives the clearly identifiable plant species from Schinz (1775). Die Reise auf den Uetliberg. Verlag des Waysenhauses, Zürich). Several species given in Schinz (1775) are not identifiable to the species level and are not included in the list. Similarly, Vicia pisiformis, Erbsenartige Wicke, given by Schinz (1775) is probably a misidentification and also not included in the list.

Latin plant species name Schinz 1775: Latin plant name (if) given by Schinz (1775); na: not available
German plant species name Schinz 1775: German plant name given by Schinz (1775)
Latin plant species name Info Flora 2024: Latin plant name according to www.infoflora.ch in 2024
German plant species name Info Flora 2024: German plant name according to www.infoflora.ch in 2024
Plant species still occurring in 2020: Plant species given in Schinz (1775) still occurring at the Uetliberg in 2020 (Zürcherische Botanische Gesellschaft. 2020. Flora des Kanton Zürich. Haupt, Bern); occurrence of Thesium alpinum, Alpen-Bergflachs, according to floristic knowledge of Rolf Holderegger and Michèle Büttner; 1: still occurring; 0: no longer occurring / extinct.

en:
The list gives the clearly identifiable plant species from Schinz (1775). Die Reise auf den Uetliberg. Verlag des Waysenhauses, Zürich). Several species given in Schinz (1775) are not identifiable to the species level and are not included in the list. Similarly, *Vicia pisiformis*, Erbsenartige Wicke, given by Schinz (1775) is probably a misidentification and also not included in the list.
Latin plant species name Schinz 1775: Latin plant name (if) given by Schinz (1775); na: not available
German plant species name Schinz 1775: German plant name given by Schinz (1775)
Latin plant species name Info Flora 2024: Latin plant name according to www.infoflora.ch in 2024
German plant species name Info Flora 2024: German plant name according to www.infoflora.ch in 2024
Plant species still occurring in 2020: Plant species given in Schinz (1775) still occurring at the Uetliberg in 2020 (Zürcherische Botanische Gesellschaft. 2020. Flora des Kanton Zürich. Haupt, Bern); occurrence of *Thesium alpinum*, Alpen-Bergflachs, according to floristic knowledge of Rolf Holderegger and Michèle Büttner; 1: still occurring; 0: no longer occurring / extinct.

flora-change

display_name: flora-change

occurrence

display_name: occurrence

plant-species

display_name: plant-species

uetliberg

display_name: uetliberg

zurich

display_name: zurich

en: Plant species list from 1775 and 2020 for Uetliberg Zürich


en: polar sea-ice sea-ice-elevation terrestrial-laser-scans tls

en: Post Processed TLS's

en: Compressed dat files

en: Data processing documentation

en: Link to post-processed TLS’s of Antarctic sea ice

en:
This dataset comprises of a post-processed set of terrestrial laser scans (TLS’s) of Antarctic sea ice obtained during the Sea Ice Physics and Ecosystem Experiment-2 (SIPEX-2, http://seaice.acecrc.org.au/sipex2012/) in September-November 2012. The post-processing steps include the registration of the individual scans into a single 3-dimensional point cloud, the removal of unwanted noise caused by particles in the air (i.e., snow crystals), and the final generation of surface grids based on the cleaned individual point returns. The final product includes the ‘xyz’ coordinates of the individual point measurements, and gridded surfaces covering study areas of 100m x 100 m, and at resolutions of 0.01 m, 0.1 m, 0.25 m, 0.5 m and 1 m for each of the survey dates. Additionally, subgrid statistics that include the mean elevation, standard deviation, minimum and maximum elevations, range, and number of point returns in each gridcell are generated. The final product is provided in space-delimited text files, with the surface grids provided in Digital Terrain Model (DTM) format ready for visualization in any GIS software.

How to cite:
Please also cite the original publication when using this data set.: Trujillo, E., K. Leonard, T. Maksym, and M. Lehning (2016), Changes in snow distribution and surface topography following a snowstorm on Antarctic sea ice, J. Geophys. Res. Earth Surf., 121, doi:[10.1002/2016JF003893](https://dx.doi.org/10.1002/2016JF003893).

polar

display_name: polar

sea-ice

display_name: sea-ice

sea-ice-elevation

display_name: sea-ice-elevation

terrestrial-laser-scans

display_name: terrestrial-laser-scans

tls

display_name: tls

en: High resolution sea ice surface topography from the SIPEX-2 expedition, East Antarctica, 2012


en: source-code avalanche snow-modelling snowpack snowdrift

en:
This dataset includes the FORTRAN code of the FSM2trans model version used in the paper: Quéno et al., Snow redistribution in an intermediate-complexity snow hydrology modelling framework, The Cryosphere, 2024.
The FSM2trans code is derived from the FSM2 model (Essery et al., 2015) and its variant FSM2oshd (Mott et al., 2023). In this model, we implemented and adapted the snowdrift model SnowTran-3D (Liston et al., 2007) and the avalanching model SnowSlide (Bernhardt and Schulz, 2010).
This dataset does not include the processing scripts to prepare meteorological input data for the model, provided as bin files.

avalanche

display_name: avalanche

snow-modelling

display_name: snow-modelling

snowdrift

display_name: snowdrift

snowpack

display_name: snowpack

source-code

display_name: source-code

en: FSM2trans code


en: forest-reserves swiss-plateau temperate-forests beech forest-in

en: Results lying deadwood

en: The file results_lying_deadwood.csv contains results of the lying deadwood survey.

en: Lookup

en: The file lookup.csv contains description for the values shown in the 5 result tables.

en: Results habitat trees

en: The file results_habitat_trees.csv contains results for the number of habitat trees.

en: Results regeneration

en: The file results_regeneration.csv contains results of the regeneration survey.

en: Data description

en: This document briefly describes the datasets.

en: Results TreMs

en: The file results_trems.csv contains results for the density of TreMs per ha.

en: Results trees

en:
The file results_trees.csv contains results of living, standing and lying and dead standing
trees as well as for stumps (trees found on the plot but broken / cut below 1.3 m).

en:
The Jorat is one of the largest continously forested areas in the Swiss Plateau. On a forested area of 778 ha, the Parc Naturel du Jorat (PNJ), a periurban parc, has been established in 2022. To document the initial state of the forest within the perimeter of the PNJ, a sample plot inventory (SPI) was carried out on 132 sample plots (SP) in winter 2021/22.
This dataset contains results from this sample plot inventory. It consists of the following files:
- results_trees.csv: Results for or living and dead trees.
- results_regeneration.csv: Results for trees with DBH < 7.0 cm, assessed in three height classes.
- results_lying_deadwood.csv: Results for lying deadwood, assessed no three line transects
- results_trems.csv: Results for occurence of tree related microhabitats (TreMs)
- results_habitat_trees.csv: Results for occurence / densities of trees carrying at least one TreM or with a DBH >= 80 for living trees or >= 36 cm for dead trees respectively.
- lookup.csv: Contains lookup tables which describe the respective results in-depth.
- data_description.pdf: Briefly describes the datasets mentioned above.

beech

display_name: beech

forest-in

display_name: forest-in

forest-reserves

display_name: forest-reserves

swiss-plateau

display_name: swiss-plateau

temperate-forests

display_name: temperate-forests

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Sample plot inventory data form the Parc Naturel du Jorat


present-weather-sensor-klosters

maintainer: Maxime Hervo

title_for_slug: present-weather-sensor-klosters

en: raclets visibility precipitation weather sensor

en: Present Weather Sensor Klosters

en: Present Weather sensor measuring visibility and weather type installed at Klosters.

en: A present weather sensor (Vaisala PWD22) was deployed in Klosters (LON: 9.880413, LAT: 46.869019) for weather observation, combining the functions of a forwardscatter visibility meter and a present weather sensor. Besides measuring ambient light, it detects the intensity as well as the amount of both liquid and solid precipitation. More information can be found in the [User's Manual](ftp://ftp.cmdl.noaa.gov/aerosol/doc/manuals/PWD22_Manual.pdf).

precipitation

display_name: precipitation

raclets

display_name: raclets

sensor

display_name: sensor

visibility

display_name: visibility

weather

display_name: weather

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


greenland-shrubs-and-microclimate

maintainer: Nathalie Chardon

title_for_slug: greenland-shrubs-and-microclimate

en: field-data arctic accessible-shrub-forest validation sdm climate

en: Nuup Kangerlua

en:
 Collected July-August 2011-2013 (PI: Jacob Nabe-Nielsen)

These data collected July-August 2011-2013 (PI: Jacob Nabe-Nielsen). Please contact J. Nabe-Nielsen (jnn_at_ecos.au.dk) to request access to data on all surveyed shrub species. Available here are only data used in Chardon et al. 2022.

 COLUMN ABBREVIATIONS

 Metadata for 90 m spatial grid

year: sampling year

alt: average altitude of grid as recorded during field surveys [m]

long: WGS84 longitude

lat: WGS84 latitude

x_stere: longitude in Polar Stereographic (EPSG 4326)

y_stere: latitude in Polar Stereographic (EPSG 4326)

 Species presence [1] or absence [0] at grid level

pa_bena: _Betula nana_

pa_sagl: _Salix glauca_

 Shrub species cover (calculated from pin hits in 0.7 x 0.7 m frame, based on total of 25 hits) [%]

cov_bena: _Betula nana_ cover

cov_sagl: _Salix glauca_ cover

 Downscaled climate (time series 1984 – 2013)

tempjja: average maximum June-August temperature [ºC]

tempmax: yearly maximum temperature [ºC]

tempmin: yearly minimum temperature [ºC]

tempcont: yearly maximum – minimum temperature [ºC]

precipmam: cumulative March-May precipitation [mm]

precipjja: cumulative June-August precipitation [mm]

insoljja: average June-August insolation [MJ cm-2 yr-1]

 Topography and terrain wetness (calculated from)

twi: SAGA wetness index (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015)

slope: slope angle (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

asp: aspect (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

tcws: Tasseled Cap Wetness component (Sentinal images)

 Community characteristics

rich: shrub species richness averaged across pin-point frames per grid

shan: Shannon diversity (‘vegan’ package; Oksanen et al. 2019)

comp_bena: shrub competition on Betula nana (i.e. summed cover of non-_B. nana_ species) [% cover]

comp_sagl: shrub competition on Salix glauca (i.e. summed cover of non-_S. glauca_ species) [% cover]

en: GitLab Repository

en: Zip drive of GitLab repository contents (https://gitlab.com/nathaliechardon/gl_microclim).

en: Kangerluarsunnguaq

en:
 Collected August 2020 (PI: Nathalie Isabelle Chardon)

These data collected August 2020 (PI: Nathalie Isabelle Chardon). Please contact N. I. Chardon (nathalie.chardon_at_gmail.com) for individual quadrat (i.e. 1 m x 1 m) data, which are averaged at the 90 m spatial grid here.

 COLUMN ABBREVIATIONS

 Metadata for 90 m spatial grid

id: sampling zone and unique 90 m grid identifier

long: WGS84 longitude

lat: WGS84 latitude

x_stere: longitude in Polar Stereographic (EPSG 4326)

y_stere: latitude in Polar Stereographic (EPSG 4326)

date: sampling day.month.year

 Species presence [1] or absence [0] at grid level

alcr: _Alnus crispa_

bena: _Betula nana_

dila: _Diapensia lapponica_

emni: _Empetrum nigrum_

hahy: _Harimanella hypoides_

lopr: _Loiseleuria procumbens_

oxpa: _Oxycoccus palustre_

phca: _Phyllodoce caerulea_

rhod: _Rhododendron_ sp.

saar: _Salix arctica_

sagl: _Salix glauca_

sahe: _Salix herbacea_

vaul: _Vaccinium uliginosum_

drin: _Dryas integrifolia_

thpr: _Thymus praecox_

 Habitat characteristics [% cover]

shrub: all shrub species

gram: graminoids

forb: forbs

bryo: bryophytes

lich: lichens

litt: litter

bare: bare ground

stone: stones (> 2 cm)

org: organic crust

 Shrub species height (maximum vegetative height) [mm] and cover (estimated in 1x1 m quadrat) [%]

alcr_c: _Alnus crispa_ cover

alcr_h: _Alnus crispa_ height

bena_c: _Betula nana_ cover

bena_h: _Betula nana_ height

dila_c: _Diapensia lapponica_ cover

dila_h: _Diapensia lapponica_ height

emni_c: _Empetrum nigrum_ cover

emni_h: _Empetrum nigrum_ height

hahy_c: _Harimanella hypoides_ cover

hahy_h: _Harimanella hypoides_ height

lopr_c: _Loiseleuria procumbens_ cover

lopr_h: _Loiseleuria procumbens_ height

oxpa_c: _Oxycoccus palustre_ cover

oxpa_h: _Oxycoccus palustre_ height

phca_c: _Phyllodoce caerulea_ cover

phca_height: _Phyllodoce caerulea_ height

rhod_c: _Rhododendron_ sp. cover

rhod_h: _Rhododendron_ sp. height

saar_c: _Salix arctica_ cover

saar_h: _Salix arctica_ height

sagl_c: _Salix glauca_ cover

sagl_h: _Salix glauca_ height

sahe_c: _Salix herbacea_ cover

sahe_h: _Salix herbacea_ height

vaul_c: _Vaccinium uliginosum_ cover

vaul_h: _Vaccinium uliginosum_ height

drin_c: _Dryas integrifolia_ cover

drin_h: _Dryas integrifolia_ height

 Community characteristics

rich_pa: shrub species richness at grid level

rich: shrub species richness averaged across 3 1x1 m sampling quadrats per grid

shan: Shannon diversity (‘vegan’ package; Oksanen et al. 2019)

comp_bena: shrub competition on _Betula nana_ (i.e. summed cover of non-_B. nana_ species) [% cover]

comp_sagl: shrub competition on _Salix glauca_ (i.e. summed cover of non-_S. glauca_ species) [% cover]

ht_cwm: maximum shrub canopy height (i.e. community weighted mean by abundance of maximum shrub height) [mm]

 Topography and terrain wetness (calculated from)

tcws: Tasseled Cap Wetness component (Sentinal images)

slope: slope angle (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

twi: SAGA wetness index (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015)

asp: aspect (MEaSUREs Greenland Ice Mapping Project Digital Elevation Model v. 1; Howat et al., 2014, 2015) [º]

 Downscaled climate (time series 1984 – 2013)

insoljja: average June-August insolation [MJ cm-2 yr-1]

precipmam: cumulative March-May precipitation [mm]

tempcont: yearly maximum – minimum temperature [ºC]

tempmin: yearly minimum temperature [ºC]

precipjja: cumulative June-August precipitation [mm]

tempjja: average maximum June-August temperature [ºC]

tempmax: yearly maximum temperature [ºC]

en:
 Study Aim

We collected these data to alternatively train and validate high resolution (~ 90 m) Species Distribution Models (SDMs) and Species Abundance Models (SAMs) for _Betula nana_ L. (dwarf birch, Betulaceae) and _Salix glauca_ L. (grey willow, Salicaceae) in Southwest Greenland to assess how well such models can predict local-scale patterns.

 Data Description

Individual (presence-absence, abundance, maximum vegetative height) and community (species composition, maximum canopy height) shrub data for two fjords near Nuuk, Southwest Greenland. Also provided are corresponding downscaled climate data as well as calculated topographic and terrain wetness indicator variables.

 Nuup Kangerlua (Godthåbsfjord)

_Betula nana_ and _Salix glauca_ presence-absence, abundance, community species richness

 Kangerluarsunnguaq (Kobbefjord)

Shrub presence-absence, abundance, maximum vegetative height, community composition, maximum shrub canopy height

 Methods

 Field survey in Nuup Kangerlua

We conducted a stratified systematic plant survey along the length of Nuup Kangerlua (NK) fjord in Soutwesth Greenland (Fig. 1 in Chardon et al. 2022; following Nabe-Nielsen et al., 2017). At five distinct sites, we sampled along elevational gradients to collect data on presences, absences, abundance, and species composition of all woody species using a 0.7 x 0.7 m pin-point frame (Fig. 1e in Chardon et al. 2022). For model training, we converted these pin-point data to percent cover estimates based on the number of pins dropped (n = 25 per plot) and averaged them across the 119 spatio-climatic grids (see next section) corresponding to the plot locations (for details see Appendix S2 in Chardon et al. 2022).

 Field survey in Kangerluarsunnguaq

We conducted a random stratified plant survey in Kangerluarsunnguaq (K) fjord in Southwest Greenland. We used a preliminary Species Abundance Model trained with summed pin counts of _Betula nana_ in NK fjord (see Fig. S1.3 in Chardon et al. 2022) to stratify the ~ 27 x 17 km fjord landscape into low, medium, and high abundances classes. We randomly selected 90 x 90 m spatio-climatic grids to survey in each class for a total of 200 grids, ensuring that they were accessible by foot or boat (for details see Appendix S2 in Chardon et al. 2022). Within each grid, we sampled within three 1 m2 quadrats arranged in a randomly rotated equilateral triangle centered on the mid-point of the cell. We used a gridded sampling quadrat with 1% delineations (Fig. 1h in Chardon et al. 2022) to record woody species presences, absences, and composition, estimated percent cover, and measured maximum shrub species vegetatitve height. At every plot, we also visually scanned the area in a 20 m radius from the plot and recorded the presence of any additional shrub species to estimate grid-level species richness. As in NK fjord, we averaged these data at the grid level (for details see Appendix S2 in Chardon et al. 2022).

 Biotic variables

We calculated biotic microscale variables from the plant survey data collected in NK and K fjords. We calculated shrub species richness, diversity, and competition (i.e. sum of non-B. nana or non-S. glauca pin hits or percent cover). In K fjord, we also calculated canopy height as the community weighted mean (by abundance) of maximum vegetative shrub height.

 Climate variables

We computed high resolution temperature, precipitation, and insolation for local scale data for the study area by statistically downscaling climate time series (1982 - 2013) from the monthly CHELSA data (Karger et al. 2017). We downscaled these data from 30 arc sec (~ 400 m at the latitude of our study) to our target grid size of ~ 90 m with geographic weighted regression and using the MEaSUREs Greenland Ice Mapping Project (GIMP) Digital Elevation Model (DEM) v. 1 (Howat et al., 2014, 2015). We then calculated 30-year averages of the climate parameters: average summer (June – August) maximum temperature, yearly maximum temperature, yearly minimum temperature, temperature continentality (yearly max. - min. temperatures), cumulative Spring (March – May) precipitation, cumulative summer precipitation, and average summer incident solar radiation (henceforth, insolation) (for calculation details see Appendices S2, S3 in Chardon et al. 2022 and Appendix S2 in von Oppen et al. 2021).

 Topography and terrain wetness indicator variables

We calculated several topographic and terrain wetness indices at a local scale. We derived slope, aspect, and the SAGA wetness index (hereafter TWI; Boehner et al., 2002; Boehner and Selige, 2006) from the GIMP DEM. TWI is a measure of how ‘wet’ an area is, based on water drainage from the surrounding landscape. We also calculated the tasseled cap wetness component (hereafter TCW, Crist and Cicone 1984) from satellite images (for details see Appendices S2, S3 in Chardon et al. 2022) as an alternative measure of wetness.

 Computer code

Attached as zip file and available on GitLab (https://gitlab.com/nathaliechardon/gl_microclim)

 Third-party data

Data used to calculate climate, topography, and terrain wetness indicator variables are publicly available (see Appendix S2 in Chardon et al. 2022 for all data references).

accessible-shrub-forest

display_name: accessible-shrub-forest

arctic

display_name: arctic

climate

display_name: climate

field-data

display_name: field-data

sdm

display_name: sdm

validation

display_name: validation

en: Greenland shrubs and microclimate


en: rain-on-snow climate-change-impact uncertainty natural-climate-variability snow-water-equivalent cryosphere

en: climate realizations

en: The dataset contains for three variables (snow water equivalent, surface water input and liquid precipitation) 50 realizations of current and future climate periods for two time horizons (mid end end of century), two emission senarions (RCP 4.5 and 8.5) and 10 climate model chains (all EUR11 chains within CH2018). To quantify natural climate variability for projections of snow conditions and resulting rain-on-snow (ROS) flood events, a weather generator was applied to simulate inherently consistent climate variables for multiple realizations of current and future climates at 100 m spatial and hourly temporal resolution over a 12 x 12 km high-altitude study area in the Swiss Alps. The output of the weather generator was used as input for subsequent simulations with an energy balance snow model. The data was extracted in 2021 from original model output.

climate-change-impact

display_name: climate-change-impact

cryosphere

display_name: cryosphere

natural-climate-variability

display_name: natural-climate-variability

rain-on-snow

display_name: rain-on-snow

snow-water-equivalent

display_name: snow-water-equivalent

uncertainty

display_name: uncertainty

educ

en: Education, culture and sport

en: Multiple realizations of daily snow water equivalent, surface water input and liquid precipitation projections for mid- and late-century


maintainer: Elisabeth Hafner

en: snow satellite hazard-mapping avalanche natural-hazard

en: SPOT6 Avalanche Outlines 16 January 2019

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset and within the limitations of the dataset described in the publications.

format: SHP

en:
Outlines of 6'041 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 16 January 2019. The dataset was acquired following a period with very high avalanche danger. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping16012019.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

The data was comprehensivly validated in a subset area in

Hafner, E.D.; Techel, F.; Leinss, S.; Bühler, Y., 2021: Mapping avalanches with satellites - evaluation of performance and completeness. Cryosphere, 15, 2: 983-1004. doi: 10.5194/tc-15-983-2021

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow

envidat

en: EnviDat: the Environmental Data Portal

en: SPOT6 Avalanche outlines 16 January 2019


maintainer: Athanasios Nenes

en: raclets cloud-droplets cloud-modeling weissfluhjoch hygroscopicity supersaturation dmt-ccn-chamber sigma-w ccn

en: Predicted cloud droplet number concentrations Weissfluhjoch

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Weissfluhjoch station between February 24 and March 8 2019. For this, a hygroscopicity parameter of 0.25 is assumed, according to the CCN-derived values. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: Hygroscopicity parameter Weissfluhjoch

en:
The aerosol hygroscopicity parameter is derived combining the CCN and SMPS size distribution data collected between February 24 and March 8 2019 at Weissfluhjoch. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The instrument supersaturation (SS%)
* The calculated hygroscopicity parameter (kappa)
* The calculated critical dry diameter of the particles (Dcr) in nm.

Missing values are indicated by "-999".

en: CCN data Weissfluhjoch

en:
In-situ CCN measurements were conducted between February 24 and March 8 2019 at Weissfluhjoch. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* Filtered CCN number concentrations (in cmˉ³) measured at 6 discrete supersaturations (SS) ranging from 0.09% to 0.74%. The name of each CCN column is indicative of the SS developed within the instrument.
* Instrument characteristics such as sample temperature (in °C) and pressure (in mbar)
* A code that refers to the reason of filtering.

Missing or filtered CCN values are indicated by "-999", while a declaration of each "Error_code" can be found in the following list:

_Error_code_:

0000: Measurements without error

1000: Period of transient operation after a supersaturation change

2000: Sharp change (decrease) in the room temperature housing the instrument, which induces a reset in column temperature

3000: Irregular values in the room temperature housing the instrument

9999: Missing data

en:
Cloud Condensation Nuclei (CCN) data: A Droplet Measurement Technologies (DMT) single-column continuous-flow streamwise thermal gradient chamber (CFSTGC; Roberts and Nenes, 2005) was deployed at the measurement site Weissfluhjoch (2700 m a.s.l., LON: 9.806475, LAT: 46.832964) to record the in-situ CCN number concentrations between February 24 and March 8 2019 for different supersaturations (SS). To account for the difference between the ambient (~735 mbar) and the calibration pressure (~800 mbar), the SS reported by the instrument is adjusted by a factor of 0.92. The CFSTGC was cycled between 6 discrete SS values ranging from 0.09% to 0.74%, producing a full CCN spectrum every hour. The raw CCN measurements are filtered to discount periods of transient operation and whenever the room temperature housing the instrument changed sufficiently to induce a reset in column temperature. Additional information can be found in Section 2.1.2 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

Hygroscopicity data: The CCN number concentration measurements were directly related to the size distribution and total aerosol concentration data measured by the Scanning Mobility Particle Size Spectrometer (SMPS) instrument at the same station (https://www.envidat.ch/dataset/aerosol-data-weissfluhjoch) to infer the particles hygroscopicity parameter (kappa). For each SMPS scan, the particles critical dry diameter (Dcr) is estimated by integrating backward the SMPS size distribution, until the aerosol number matches the CCN concentration observed for the same time period as the SMPS scan. Assuming the particle chemical composition is internally mixed, the kappa is determined from Dcr and SS, applying Köhler theory. Additional information can be found in Section 2.2 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

Predicted cloud droplet numbers: Droplet calculations are carried out with the physically based aerosol activation parameterization of Morales and Nenes (2014), employing the “characteristic velocity” approach of Morales and Nenes (2010). Aerosol size distribution observations required to predict the cloud droplet numbers and maximum in-cloud supersaturation are obtained from the SMPS instrument deployed at Weissfluhjoch. The required vertical velocity measurements are derived from the wind Doppler Lidar (https://www.envidat.ch/dataset/lidar-wind-profiler-data) deployed at Davos Wolfgang and are extracted for the altitude of interest, being 1100 m above ground level for Weissfluhjoch. Additional information can be found in Section 2.3 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

ccn

display_name: ccn

cloud-droplets

display_name: cloud-droplets

cloud-modeling

display_name: cloud-modeling

dmt-ccn-chamber

display_name: dmt-ccn-chamber

hygroscopicity

display_name: hygroscopicity

raclets

display_name: raclets

sigma-w

display_name: sigma-w

supersaturation

display_name: supersaturation

weissfluhjoch

display_name: weissfluhjoch

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: CCN, hygroscopicity, predicted cloud droplet numbers Weissfluhjoch