en: meteorology wind-speed temperature precipitation climate-change swiss-forest-lab long-term relative-humidity meteo par

en: Site photo of the field station (NAF)

en: Site photo of the field station form the side.

en: Data plot of the field station (NAF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Nationalpark)

en: Site aerial photo from both Nationalpark stations. Source: Google. 2016. Site aerial photo from both Nationalpark stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (NAB)

en: Site photo of the forest station (NAB)

en: Site photo of the forest station from the side.

en: Forest station data (NAB)

en: Data file.

en: Field station data (NAF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Nationalpark in Switzerland where one station is located within a natural coniferous forest stand (NAB) with mountain pine (_Pinus mugo_; 210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Nationalpark is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Nationalpark, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


maintainer: EnviDat Support

en: cryowrf topography landuse antarctica wrf

state: active

type: dataset

en: WPSinput

media_type: application/zip

en: Input files to run the Weather Research and Forecasting model (WRF) preprocessing system WPS with REMA topography and AntarcticaLC2000 landuse data (see Documentation for details).

format: ZIP

mimetype: application/zip

en: Scripts

en: Scripts to run the preprocessing to produce WRF binary tiles from REMA and AntarcticaLC2000 for topography and landuse (see Documentation for procedure).

en: Documentation

media_type: application/pdf

en: Documentation about how the provided dataset was produced including details to reproduce the dataset.

format: PDF

mimetype: application/pdf

en:
Reference Elevation Model of Antarctica (REMA) topography and AntarcticaLC2000 landuse data
are now available as static data input for the Weather Research and Forecasting model (WRF). Topography
and landuse are made available at a spatial resolution of 1 km. This documentation describes the methods
applied to convert REMA and AntarcticaLC2000 to WRF readable format and shows how this improves
the representation of the Antarctic topography and landuse categories over coastal Antarctic regions.

antarctica

display_name: antarctica

cryowrf

display_name: cryowrf

landuse

display_name: landuse

topography

display_name: topography

wrf

display_name: wrf

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: REMA topography and AntarcticaLC2000 for WRF


en: multi-year-drought precipitation chelsa megadrought potential-evapotranspiration extreme-events drought

en: Global annual layers of the multiyear meteorological droughts (MYMD) at a 1/24° (~5km) spatial resolution

format: SERVICE

en: Multiyear meteorological droughts (MYMD) statistics - Description

en: Description of column names, and units of the fields contained in the dataset "Multiyear meteorological droughts (MYMD) statistics".

format: XLS

en: Standardized Precipitation Index (SPI)

en: Global monthly layers of the Standardized Precipitation Index (SPI) a 30 arcsec (~1km) spatial resolution

en: Standardised Precipitation Evapotranspiration Index (SPEI)

en: Global monthly layers of the Standardized Precipitation Evapotranspiration Index (SPEI) a 30 arcsec (~1km) spatial resolution

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en: Statistics of the multiyear meteorological droughts, containing the ID, duration, area, and empirical ranking of the droughts.

en:
The dataset consists of the standardized precipitation (SPI) and the standardized precipitation evapotranspiration index (SPEI) index with a 30 arcsec (~1km) horizontal resolution.
Data for precipitation rates (pr) and potential evapotranspiration (pet) are taken from CHELSA V2.1 (https://doi.org/10.16904/envidat.228.v2.1). Both data sets are monthly time series from 1980 to 2018 at 30 arcsec. and have the unit of kg m-2 month-1. SPEI is a more reliable measure of drought than SPI as it additionally considers the effect of potential evapotranspiration. Potential evapotranspiration (pet) is the amount of water per area per time that can evaporate at the soil surface or be transpired by plants in absence of water supply limitations. SPEI effectively estimates for a given location how the climatic water balance, i.e., the difference between precipitation rate (pr) and potential evapotranspiration (pet), relates to the long-term mean. Here, pet was calculated with the Penman-Montheith approach, assuming surface conductance of a reference crop of 12 cm height following the definition of the Food and Agriculture Organization of the United Nations (FAO), originating from CHELSA-BIOCLIM+ database (https://www.doi.org/10.16904/envidat.332). To obtain global time series of SPEI, in each pixel the frequency distribution of water balance estimates (pr-pet) is approximated with a log-logistic probability distribution function. We calculate monthly SPEI using a 12-month memory and approximate the parameters of the log-logistic probability distribution based on the time series from 1980-2018. Such a 12-month time window is suitable to capture long-term drought events that are long enough to impose substantial impacts on agriculture, hydrology, and ecosystems while ones at shorter time scales would be more appropriate to detect short-term drought. For each month, SPEI is calculated considering the respective water-balance value and the values of the eleven preceding months. Here we use SPEI-12 in December to represent the overall water-balance condition of the respective year. The resulting SPEI data has a horizontal resolution of 130 arcsec (~1km). The calculation of SPI and SPEI is done in R with the package SPEI (https://www.doi.org/10.32614/CRAN.package.SPEI).

chelsa

display_name: chelsa

drought

display_name: drought

extreme-events

display_name: extreme-events

megadrought

display_name: megadrought

multi-year-drought

display_name: multi-year-drought

potential-evapotranspiration

display_name: potential-evapotranspiration

en: High resolution global standardized drought indices


maintainer: Rebecca Mott

en: turbulent-sensible-heat-fluxes snow-patch patchy-snow-covers eddy-covariance-measurements dischmex

en: Gletschboden setup

media_type: image/png

en: Background map based on data © 2014/2016 swisstopo (JD100042)

format: PNG

mimetype: image/png

en: Eddy-covariance measurement with an ultrasonic anemometer (DA-600, Kaijo-Denki) in 0.3 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.6 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 0.7 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.5 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.3 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.2 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 3.2 m on a daily basis.

en: Output explanation

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 1.7 m on a daily basis.

en:
This dataset contains eddy-covariance measurements in the ablation period of 2014-2016. Measurements were taken from two turbulence towers over a long-lasting snow patch, which are 5 m apart from each other (2014 and 2015). The turbulence towers were equipped with two YOUNG ultrasonic anemometers mounted 0.7 m (in 2014) and 3.3 m (in 2015) above snow-free ground, two ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) mounted at 2.6 m (in 2014) and 2.2 m (in 2015) above snow-free ground and one anemometer (DA-600, Kaijo Denki) mounted at 0.3 m above snow surface.

The measurement setup changed in 2016 and includes a measurement above the snow-free ground in upwind direction (Swiss coordinates: 790191/176689). The measurement tower is equipped with one ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 3.3 m above the snow-free ground. Additionally, one measurement tower is installed above the long-Lasting snow patch and equipped with the same setup as 2015.

Turbulence data were sampled at a frequency of 20 Hz. The processing of the data to quality controlled fluxes has been done with the Biomicrometeorology flux software (Thomas et al., 2009). The program applies plausibility tests and a despiking test after Vickers and Mahrt (1997) on the measured data. The routine further applies a time-lag correction and considers the deployment (e.g. the sonic azimuth). A frequency response correction (Moore, 1986) is done and a three-dimensional rotation is performed. Finally, quality assurance/quality control (QA/QC) flags after Foken et al., (2004) are issued and fast Fourier transform power and co-spectra are calculated. The change in snow height is considered in the post-processing for every measurement day. The turbulence data were averaged to 30 minute intervals.

dischmex

display_name: dischmex

eddy-covariance-measurements

display_name: eddy-covariance-measurements

patchy-snow-covers

display_name: patchy-snow-covers

snow-patch

display_name: snow-patch

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: DISCHMEX - Impact of extreme land-surface heterogeneity on micrometeorology over spring snow-cover


en: info-fauna database soil-organisms fungi fauna conservation soil-quality lichens red-list soil-dependency ecosystem-protection soil-biodiversity eco-fauna

en: Raw dataset of species and their soil dependency as well as endangerment status.

en: Overview over the soil dependency and endangerment status of different groups of organisms.

en: Proportion of endangered species grouped by the four soil dependency classes.

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:
Frey B., Maurer C., Schneider K. (2023) Informationen zum Boden anhand der Gebundenheit der Rote-Liste Arten BAFU. Bundesamt für Umwelt BAFU. 26 p.

Please cite this paper together with the citation for the datafile.

Soil is the habitat and basis of life for countless creatures. The great importance of soil organisms for the fertility of our soils is widely recognized, but information is sparse on their distribution and possible endangerment in Switzerland. In the present project, target species, i.e. species that are closely linked to the soil, were identified, and for the the first time, information was gathered on the degree of endangerment of the soil ecosystem in Switzerland on the basis of Red List species. For eleven Red List groups, the species' soil dependency was determined, i.e. whether their life cycle includes stages in or on the soil. The assessment of soil dependency was made using four classes, which enabled the classification not only of insects but also of vertebrates, land snails, lichens and fungi.

conservation

display_name: conservation

database

display_name: database

eco-fauna

display_name: eco-fauna

ecosystem-protection

display_name: ecosystem-protection

fauna

display_name: fauna

fungi

display_name: fungi

info-fauna

display_name: info-fauna

lichens

display_name: lichens

red-list

display_name: red-list

soil-biodiversity

display_name: soil-biodiversity

soil-dependency

display_name: soil-dependency

soil-organisms

display_name: soil-organisms

soil-quality

display_name: soil-quality

educ

en: Education, culture and sport

en: EnviDat: the Environmental Data Portal

en: Information on soil based on the soil dependency of the FOEN red list species


bryophytes-of-europe-traits-bet-dataset

title_for_slug: bryophytes-of-europe-traits-bet-dataset

en: indicator-values hornworts iucn mosses life-history-traits red-list liverworts bioclimatic-variables

media_type: text/plain

en: Text file including the BET dataset.

format: TXT

en: Excel file including the BET dataset and (trait) explanations.

en: PDF including the (trait) explanations.

en: The Bryophytes of Europe Traits (BET) dataset includes values for 65 biological and ecological traits and 25 bioclimatic variables for all 1816 bryophytes included in the European Red List (Hodgetts et al. 2019). The traits are compiled from several regional trait datasets and manually complemented using Floras, species-specific literature and expert knowledge. The bioclimatic variables are calculated using the European range of each species. Details regarding the trait compilation and extraction of bioclimatic variables can be found in the corresponding data paper (Van Zuijlen et al. 2023).

bioclimatic-variables

display_name: bioclimatic-variables

hornworts

display_name: hornworts

indicator-values

display_name: indicator-values

iucn

display_name: iucn

life-history-traits

display_name: life-history-traits

liverworts

display_name: liverworts

mosses

display_name: mosses


maintainer: Jürg Schweizer

en: snow-avalanche danger-level avalanche-size avalanche-forcasting avalanche-activity

en: Avalanche activity data

media_type: text/csv

en: This data file includes data on the avalanche activity per day aggregated from the avalanche data.

format: CSV

mimetype: text/csv

en: Snow avalanche data

en: This data file includes data on the avalanches mapped in the region of Davos.

en: Readme

en: The Readme file contains the description of the two data files.

en:
These data include all avalanches that were mapped in the region of Davos, Switzerland during the winters 1998-1999 to 2018-2019 (21 years), in total 13,918 avalanches, and the corresponding forecast danger level valid on the day of avalanche occurrence, 3533 days and danger ratings in total.

This avalanche activity data set was analysed and results published by Schweizer et al. (2020). They found that the
number of avalanches per day strongly increased with increasing danger level, but avalanche size was poorly related to avalanche danger level.

The data are provided in two files: the first includes the avalanche data (13,918 records); the second includes the avalanche activity per day (3533 records).
Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Schweizer, J., Mitterer, C., Techel, F., Stoffel, A. and Reuter, B., 2020. On the relation between avalanche occurrence and avalanche danger level. The Cryosphere, 14, 737-750, https://doi.org/10.5194/tc-14-737-2020.

avalanche-activity

display_name: avalanche-activity

avalanche-forcasting

display_name: avalanche-forcasting

avalanche-size

display_name: avalanche-size

danger-level

display_name: danger-level

snow-avalanche

display_name: snow-avalanche

en: Snow avalanche data Davos, Switzerland, 1999-2019


en: COST European Snow Booklet (ESB) - DORA Link

media_type: text/html

en: DORA Link of the COST European Snow Booklet (ESB).

format: HTML

en: European Snow Booklet unpublished metadata

en: The entire station metadata of all European institutions that contributed data is stored in METADATA_unpublished.xlsx. This file, however, cannot be accessed, since not all institutions gave permission to publish their station metadata. If you wish to access the metadata, please send a request to marty@slf.ch stating clearly why you want to access these metadata. NOTE: in this file ONLY station metadata (Lat/Lon/Altitude) is given, NO measured snow depth data.

en: List of authors and list of the editorial board of the European Snow Booklet

en:
Here you can find the list of all lead authors of the different chapters of the European Snow Booklet (ESB).
In addition a list of the editorial board that reviewed the ESB is given.

en: European Snow Booklet public metadata

en:
The core of the European Snow Booklet (ESB), the country reports of 38 European countries, are based on information and metadata on snow measurements collected through a comprehensive survey, the ESB Questionnaire, between August 2017 and March 2018. The station metadata (for example location, elevation, measurement start date) from each country was provided by one or several institutions responsible for snow observations. By answering the questionnaire the contacts agreed that the information and metadata provided could be presented in the ESB. For cases where institutions indicated that information on station locations could be made publicly available, the metadata for the variables snow depth (HS), depth of snowfall (HN) and water equivalent of the snow cover (SWE), is additionally provided here for download (METADATA.xlsx).
Please note that not all institutions gave permission to publish their station metadata. This metadata has to be requested from the non-personal institution contacts provided in the METADATA.xlsx file. In some cases, however, no institutional contact is available and thus the contact of the country representative who filled in the questionnaire is used.
For current, updated station metadata we refer to the (non-personal) institutional contacts provided in METADATA.xlsx and/or the institution webpages. Note, however, that we cannot guarantee for completeness of the dataset for all countries because operational networks are prone to changes.

en: COST European Snow Booklet (ESB)

en: Please find here the web version of the COST European Snow Booklet (ESB).

en:
The European Snow Booklet (ESB) is a book of reference for snow measurements that has been produced through collaboration with many European snow practitioners and snow scientists in the framework of the European Cooperation in Science and Technology (COST) Action ES1404 “A European network for a harmonised monitoring of snow for the benefit of climate change scenarios, hydrology and numerical weather prediction (HarmoSnow)”. The ESB provides a unique collection of information about operational snow observations in the European countries and the methods used to perform basic measurements of snow on the ground: snow depth (HS), depth of snowfall (HN), water equivalent of the snow cover (SWE) and presence of snow on the ground (PSG). Information and station metadata (for example location, elevation) for these basic snow variables were collected through a comprehensive survey, the ESB questionnaire between August 2017 and March 2018. Numerous institutions of 38 European countries provided detailed information describing the status of the operational snow observations and the methods used at the time of the survey. Based on the information provided, a country report was written for each European country. Similarities and differences among the countries, that is, the choice of snow variables to be measured, the measurement principles applied, the number of stations, or the spatial and elevational station distribution are pointed out. Thus the collection of country reports demonstrates the relevance of snow measurements for each country. Thus, the intention of the ESB is to foster better knowledge transfer regarding snow measurements between the snow science and operational communities and to improve the communication of information to the general public.

For detailed information on the European countries, we refer to the ESB, which can be downloaded here (envidat.ch). Please note that the ESB is not a living document and information and station metadata are from August 2017 till March 2018, except for Latvia (metadata updated in December 2018).

depth-of-snowfall

display_name: depth-of-snowfall

harmonisation-of-snow-measurements

display_name: harmonisation-of-snow-measurements

snow-depth

display_name: snow-depth

snow-measurement-methods

display_name: snow-measurement-methods

water-equivalent-of-the-snow-cover

display_name: water-equivalent-of-the-snow-cover

educ

en: Education, culture and sport

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: European Snow Booklet – an Inventory of Snow Measurements in Europe


maintainer: Mahdi Jafari

en: openfoam numerical-simulation snow-density-profile convection-in-snow vapor-transport

en: snowpackBuoyantPimpleFoam

en:
This zipped folder includes (1) the source code files, (2) an example case for simulation, and (3) an instruction how to compile and use the new solver.

Note that the most updated version of snowpackBuoyantPimpleFoam can be found in the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/snow-models/snowpackbuoyantpimplefoam

en: snowpackBuoyantPimpleFoam is a two-phase solver implemented to model convection of water vapor with phase change in snowpacks. This new solver is based on the standard solver of buoyantPimpleFoam in the open-source fluid dynamics software, OpenFOAM 5.0 (www.openfoam.org).

convection-in-snow

display_name: convection-in-snow

numerical-simulation

display_name: numerical-simulation

openfoam

display_name: openfoam

snow-density-profile

display_name: snow-density-profile

vapor-transport

display_name: vapor-transport

en: EnviDat: the Environmental Data Portal

en: snowpackBuoyantPimpleFoam: an OpenFOAM Eulerian–Eulerian two-phase solver for modelling convection of water vapor in snowpacks


en: mountains fire meteorological-data climate-indicators climate european-alps europe climate-change forest-fire indicator-values

en: Data access

en: This dataset contains the Fire Weather Index for Hydrological Bavaria from 1980 - 2099 as stated in the paper "Climate change impacts on regional fire weather in heterogeneous landscapes of Central Europe" published in Natural Hazards and Earth System Sciens (NHESS) 2023. The dataset contains daily Fire Weather Index values for all 50 members (subfolders of the dataset) of the CRCM5-LE (11 km spatial resolution) from 1980 to 2099 over the domain of Hydrological Bavaria. Please cite this dataset as the publication: Miller, J., Böhnisch, A., Ludwig, R., & Brunner, M. I. (2023). Climate change impacts on regional fire weather in heterogeneous landscapes of Central Europe. Natural Hazards and Earth System Sciences Discussions, 1-25. doi: 10.5194/nhess-2023-51.

climate

display_name: climate

climate-change

display_name: climate-change

climate-indicators

display_name: climate-indicators

europe

display_name: europe

european-alps

display_name: european-alps

fire

display_name: fire

forest-fire

display_name: forest-fire

indicator-values

display_name: indicator-values

meteorological-data

display_name: meteorological-data

mountains

display_name: mountains

en: Fire Weather Index for Hydrological Bavaria from 1980-2099 derived from the 50 member CRCM5-LE


en: cosmo-wrf meteoswiss numerical-simulation high-resolution complex-terrain

en: WPSSetup

en: Scripts that need to be changed to compile WPS (see COSMOWRFdocumentation.pdf, Section 4)

en: COSMO-WRF documentation v1.0

en:
Gerber, Franziska; Sharma, Varun (2018). Running COSMO-WRF on very-high resolution over complex terrain. EnviDat. doi:10.16904/envidat.35

Documentation about the procedure to run COSMO-WRF

en: WRFrun

en: Scripts to run COSMO-WRF simulation (see Section 6 in COSMOWRFdocumentation.pdf)

en: Postprocessing

en: Postprocessing scripts to map WRF output on swiss coordinates (see Section 7 in COSMOWRFdocumentation.pdf)

en: StaticData

en:
Scripts to process geographical/static data (see Section 3 in COSMOWRFdocumentation.pdf).
- ascii_to_bin_landuse.f90
- ascii_to_bin_soiltype.f90
- ascii_to_bin_topo_wgs84_ws2sf1.f90
- see_slopes.ncl
- soiltype_writing.py
- toposmooth_wgs84_cosmobound.ncl
- write_geogrid.o

en: MeteorologicalData

en: Scripts to process meteorological data (see Section 2 in COSMOWRFdocumentation.pdf).

en: WPSrun

en: Scripts to run the WRF pre-processing (WPS) for COSMO-WRF simulation (see Section 5 in COSMOWRFdocumentation.pdf)

en: This is a technical documentation of the procedure to run the Weather Research and Forecasting (WRF) model over complex alpine terrain using Consortium for Small-Scale Modeling (COSMO) reanalysis by the Federal Office of Meteorology and Climatology (MeteoSwiss) as initial and boundary conditions (COMSO-WRF). The setup is adapted for very high resolution simulations based on COSMO-2 (2.2 km resolution) reanalysis. This document gives an overview over steps to setup COSMO-WRF and adaptations needed to run COSMO-WRF. Additionally, the calculation of precipitation rate at a horizontal plane and remapping COSMO-WRF output on Swiss coordinates are documented.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

high-resolution

display_name: high-resolution

meteoswiss

display_name: meteoswiss


maintainer: Anita C. Risch

en: non-native-plant native-plant grassland herbivory weed-management

en: Correction: Data file native and non-native plant interactions in Australian grasslands

en:
taxa tab:	list and overview of all the recorded species

* family:                 family of the plant

* genus:                genus of the plant

* species:                plant species name

* origin:                indicates whether the plant is native to Australia or not (non-native)

* common name:	        common name of the plant species

* functional group:	        functional group of the plant species: forb, graminoid, fern, tree

* functional group detailed:	gives more detail about the type of graminoid and forb: legume, forb (non-leguminous),
                        grass, sedge, rush, fern, tree

* lifeform:                annual or perennial lifeform (species which can have both of these lifeforms where
                        considered as annuals)

plot tab:	list of species found in each plot and their cover (%)

* sampling.session:        provides information about the sampling time:
                        May2020 = data that was collected in May 2020
                        Nov2020 = data that was collected in November 2020

* farm.name:	            name of the farms where the sampling took place:
                        SF = farm of the Southern group
                        NF = farm of the Northern group
                        numbers 1-3 = randomly allocated to the Southern group of farms
                        numbers 4-6 = randomly allocated to the Northern group of farms

* site.type:	                KG: Kangaroo grass dominated site
                        ALG: ALG+KG site (Kangarooo grass and African lovegrass co-dominated site)

* plot.no:                plot number: 9-12

* scientific.name:	        scientific name of the plant species found in a certain plot

* functional group:	        indicates whether the species found is a tree, forb, graminoid or fern

* functional group detailed:	indicates whether the species found is a tree, legume, forb (non-leguminous),
                        grass, sedge, rush, fern

* lifeform:                specifies the lifeform of the species: annual or perennial lifeform
                        (species which can have both of these lifeforms where considered as annuals)

corrections tab:	Detailed description of corrections made in plot.data tab

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Schlierenzauer, C., Risch, A.C., Schütz, M., Firn, J. 2021. Non-native Eragrostis curvula reduces plant species diversity in pastures of South-eastern Australia even when native Themeda triandra remains co-dominant. Plants 10, 596._

Please cite this paper together with the citation for the datafile.

Study area
The study was conducted in the lowland grassy woodlands of the Bega Valley Region, which is located in the south-east corner of New South Wales, Australia. Embedded between the Pacific Ocean and the Australian Alps, the lowland grassy woodlands are mostly located on granitic substrates and reach elevations of roughly 500 m above sea level. Typically, these grassy woodlands receive less precipitation (mean annual precipitation between 700-1100 mm) compared to the more elevated areas that surround them (NSW Government - Office of Environment and Heritage 2017).
The vegetation is dominated by an open tree canopy layer consisting of Eucalyptus tereticornis Sm, Angophora floribunda Sm. (Sweet) and a range of other eucalypt species. Sometimes shrub or small trees are also present, whereas grasses and forbs form the ground-cover. In areas without intensive agricultural history, this layer is dominated by perennial, tussock grasses such as Themeda triandra Forssk, Microlaena stipoides R.Br (Weeping Grass), Eragrostis leptostachya Steud. (Paddock Lovegrass) and Echinopogon ovatus P.Beauv (Forest Hedgehog Grass). The remaining inter-tussock spaces are occupied by a diversity of growth-restricted grasses and herbaceous forbs (NSW - Department of Planing, Industries and Environment 2019; NSW Government - Office of Environment and Heritage 2017).
Clearing, pasture sowing, fertilizer application and livestock grazing resulted in a dramatic decrease in the extent of these natural woodlands, with less than five percent within conservation reserves and overall, with only about 20% of their original extent in New South Wales still existing (Tozer et al. 2010). The remaining areas outside of reserves are threatened by altered fire frequencies, habitat clearing, livestock grazing and especially by non-native plant invasion, particularly Eragrostis curvula (Schrad.) Nees. For this reason, the grassy woodlands are listed as an endangered ecological community in the NSW state legislation. Additionally, they are considered as critically endangered by the Commonwealth of Australia (Threatened Species Scientific Committee (TSSC) 2013).

Experimental design and sampling
The study was conducted on six farms and in each of them two sites were chosen, representing a paired design. One of the sites at each farm is dominated by native Themeda triandra, the other one co-dominated by non-native Eragrostis curvula and Themeda triandra. All farms are within a radius of approximately 10 km from the town Candelo. Three of the farms are located North (36°40’ to 36°42’ S and 149°38’ to 149°42’ E) and three of them are located South (36°51’ to 36°49’ S and 149°38’ to 149°42’ E) of Candelo.
Non-native herbivores (mainly cattle, sheep and rabbits) and native herbivorous marsupials (mainly kangaroos, wallabies and wombats) are present in the area of these sites. On each site, data was collected within four plots (each 1 x 1 m) in May and November 2020. All plant species found within a plot were recorded and their relative abundance was estimated.

References
NSW - Department of Planing, Industries and Environment. 2019. “Lowland Grassy Woodland in the South East Corner Bioregion - Endangered Ecological Community Listing.” https://www.environment.nsw.gov.au/topics/animals-and-plants/threatened-species/nsw-threatened-species-scientific-committee/determinations/final-determinations/2004-2007/lowland-grassy-woodland-south-east-corner-bioregion-endangered-ecological-community-l (February 18, 2021).
NSW Government - Office of Environment and Heritage. 2017. “Lowland Grassy Woodland in the South East Corner Bioregion - Profile.” https://www.environment.nsw.gov.au/threatenedSpeciesApp/profile.aspx?id=20070 (January 31, 2021).
Threatened Species Scientific Committee (TSSC). 2013. Environment Protection and Biodiversity Conservation Act 1999 (EPBC Act) Conservation Advice for Lowland Grassy Woodland in the South East Corner Bioregion. http://www.environment.gov.au/biodiversity/threatened/communities/pubs/82-conservation-advice.pdf.
Tozer, Mark et al. 2010. “Native Vegetation of Southeast NSW: A Revised Classification and Map for the Coast and Eastern Tablelands.” Cunninghamia : a journal of plant ecology for eastern Australia 11(3): 359–406.

grassland

display_name: grassland

herbivory

display_name: herbivory

native-plant

display_name: native-plant

non-native-plant

display_name: non-native-plant

weed-management

display_name: weed-management

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Native and no-native plant interactions in Australian grasslands


maintainer: Athanasios Nenes

en: supersaturation hygroscopicity sigma-w raclets dmt-ccn-chamber cloud-modeling ccn cloud-droplets weissfluhjoch

en: Predicted cloud droplet number concentrations Weissfluhjoch

en:
In-situ measurements of aerosol size distributions along with updraft velocities collected from a wind Doppler Lidar are coupled with a state-of-the art droplet activation parameterization (Morales and Nenes, 2014) to determine the cloud droplet number and maximum in-cloud supersaturation that can potentially form over the Weissfluhjoch station between February 24 and March 8 2019. For this, a hygroscopicity parameter of 0.25 is assumed, according to the CCN-derived values. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The wind-lidar derived standard deviation of updraft velocities (sigma-w) in m/s, used to apply the parameterization employing a single characteristic velocity (Morales and Nenes, 2010)
* The maximum predicted cloud parcel supersaturation (Smax%)
* The total in-situ aerosol number concentration (Naer) in cmˉ³, measured by the SMPS
* The predicted cloud droplet numbers (Nd) in cmˉ³
* The activation fraction (%)

en: CCN data Weissfluhjoch

en:
In-situ CCN measurements were conducted between February 24 and March 8 2019 at Weissfluhjoch. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* Filtered CCN number concentrations (in cmˉ³) measured at 6 discrete supersaturations (SS) ranging from 0.09% to 0.74%. The name of each CCN column is indicative of the SS developed within the instrument.
* Instrument characteristics such as sample temperature (in °C) and pressure (in mbar)
* A code that refers to the reason of filtering.

Missing or filtered CCN values are indicated by "-999", while a declaration of each "Error_code" can be found in the following list:

_Error_code_:

0000: Measurements without error

1000: Period of transient operation after a supersaturation change

2000: Sharp change (decrease) in the room temperature housing the instrument, which induces a reset in column temperature

3000: Irregular values in the room temperature housing the instrument

9999: Missing data

en: Hygroscopicity parameter Weissfluhjoch

en:
The aerosol hygroscopicity parameter is derived combining the CCN and SMPS size distribution data collected between February 24 and March 8 2019 at Weissfluhjoch. The data file contains:

* Date and time (DD/MM/YYYY hh:mm:ss) in UTC
* The instrument supersaturation (SS%)
* The calculated hygroscopicity parameter (kappa)
* The calculated critical dry diameter of the particles (Dcr) in nm.

Missing values are indicated by "-999".

en:
Cloud Condensation Nuclei (CCN) data: A Droplet Measurement Technologies (DMT) single-column continuous-flow streamwise thermal gradient chamber (CFSTGC; Roberts and Nenes, 2005) was deployed at the measurement site Weissfluhjoch (2700 m a.s.l., LON: 9.806475, LAT: 46.832964) to record the in-situ CCN number concentrations between February 24 and March 8 2019 for different supersaturations (SS). To account for the difference between the ambient (~735 mbar) and the calibration pressure (~800 mbar), the SS reported by the instrument is adjusted by a factor of 0.92. The CFSTGC was cycled between 6 discrete SS values ranging from 0.09% to 0.74%, producing a full CCN spectrum every hour. The raw CCN measurements are filtered to discount periods of transient operation and whenever the room temperature housing the instrument changed sufficiently to induce a reset in column temperature. Additional information can be found in Section 2.1.2 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

Hygroscopicity data: The CCN number concentration measurements were directly related to the size distribution and total aerosol concentration data measured by the Scanning Mobility Particle Size Spectrometer (SMPS) instrument at the same station (https://www.envidat.ch/dataset/aerosol-data-weissfluhjoch) to infer the particles hygroscopicity parameter (kappa). For each SMPS scan, the particles critical dry diameter (Dcr) is estimated by integrating backward the SMPS size distribution, until the aerosol number matches the CCN concentration observed for the same time period as the SMPS scan. Assuming the particle chemical composition is internally mixed, the kappa is determined from Dcr and SS, applying Köhler theory. Additional information can be found in Section 2.2 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

Predicted cloud droplet numbers: Droplet calculations are carried out with the physically based aerosol activation parameterization of Morales and Nenes (2014), employing the “characteristic velocity” approach of Morales and Nenes (2010). Aerosol size distribution observations required to predict the cloud droplet numbers and maximum in-cloud supersaturation are obtained from the SMPS instrument deployed at Weissfluhjoch. The required vertical velocity measurements are derived from the wind Doppler Lidar (https://www.envidat.ch/dataset/lidar-wind-profiler-data) deployed at Davos Wolfgang and are extracted for the altitude of interest, being 1100 m above ground level for Weissfluhjoch. Additional information can be found in Section 2.3 [here](https://acp.copernicus.org/preprints/acp-2020-1036/).

ccn

display_name: ccn

cloud-droplets

display_name: cloud-droplets

cloud-modeling

display_name: cloud-modeling

dmt-ccn-chamber

display_name: dmt-ccn-chamber

hygroscopicity

display_name: hygroscopicity

raclets

display_name: raclets

sigma-w

display_name: sigma-w

supersaturation

display_name: supersaturation

weissfluhjoch

display_name: weissfluhjoch

en: CCN, hygroscopicity, predicted cloud droplet numbers Weissfluhjoch


maintainer: Avalanche Warning Service SLF

en: Avalanche fatalities per year in Switzerland since 1936/1937

en:
Attention: this data is not updated after 2022 anymore.
This dataset contains the statistics on the number of avalanche fatalities per hydrological year in Switzerland. The data set commences with the beginning of the hydrological year 1936/37 on 01/10/1936. After the completion of a hydrological year, the new data is appended to the existing dataset.
The following information is contained (by column and column title):
 - hydrological year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)
The definition for these four categories as described in the guidelines to the avalanche accident database:
**tour**:
activities include back-country ski, snowboard or snow-shoe touring
**offpiste**:
access from ski area, generally from the top of a skilift with short hiking distances
**transportation.corridors** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people travelling or recreating on open or temporarily closed
transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)
**buildings** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people inside or just outside buildings, and workers on high alpine building
sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

en: Number of avalanche fatalities per hydrological year in Switzerland since 1936-1937


en: swiss-plateau forest-reserves temperate-forests beech forest-in

en: Lookup

en: The file lookup.csv contains description for the values shown in the 5 result tables.

en: Results regeneration

en: The file results_regeneration.csv contains results of the regeneration survey.

en: Results habitat trees

en: The file results_habitat_trees.csv contains results for the number of habitat trees.

en: Results lying deadwood

en: The file results_lying_deadwood.csv contains results of the lying deadwood survey.

en: Results trees

en:
The file results_trees.csv contains results of living, standing and lying and dead standing
trees as well as for stumps (trees found on the plot but broken / cut below 1.3 m).

en: Data description

en: This document briefly describes the datasets.

en: Results TreMs

en: The file results_trems.csv contains results for the density of TreMs per ha.

en:
The Jorat is one of the largest continously forested areas in the Swiss Plateau. On a forested area of 778 ha, the Parc Naturel du Jorat (PNJ), a periurban parc, has been established in 2022. To document the initial state of the forest within the perimeter of the PNJ, a sample plot inventory (SPI) was carried out on 132 sample plots (SP) in winter 2021/22.
This dataset contains results from this sample plot inventory. It consists of the following files:
- results_trees.csv: Results for or living and dead trees.
- results_regeneration.csv: Results for trees with DBH < 7.0 cm, assessed in three height classes.
- results_lying_deadwood.csv: Results for lying deadwood, assessed no three line transects
- results_trems.csv: Results for occurence of tree related microhabitats (TreMs)
- results_habitat_trees.csv: Results for occurence / densities of trees carrying at least one TreM or with a DBH >= 80 for living trees or >= 36 cm for dead trees respectively.
- lookup.csv: Contains lookup tables which describe the respective results in-depth.
- data_description.pdf: Briefly describes the datasets mentioned above.

beech

display_name: beech

forest-in

display_name: forest-in

forest-reserves

display_name: forest-reserves

swiss-plateau

display_name: swiss-plateau

temperate-forests

display_name: temperate-forests

en: Sample plot inventory data form the Parc Naturel du Jorat


en: last-glacial-maximum air-temperature glaciers orography precipitation paleo-climate

en: Technical documentation

en: Technical documentation containing file metadata and variable descriptions.

en: Data Access

en:
High resolution, downscaled climate model data are used in a wide variety of applications in environmental sciences. Here we present the CHELSA-TraCE21k downscaling algorithm to create global monthly climatologies for temperature and precipitation at 30 arcsec spatial resolution in 100 year time steps for the last 21,000 years. Paleo orography at high spatial resolution and at each timestep is created by combining high resolution information on glacial cover from current and Last Glacial Maximum (LGM) glacier databases with the interpolation of a dynamic ice sheet model (ICE6G) and a coupling to mean annual temperatures from CCSM3-TraCE21k. Based on the reconstructed paleo orography, mean annual temperature and precipitation was downscaled using the CHELSA V1.2 algorithm.

The data is published under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

format: GeoTIFF

air-temperature

display_name: air-temperature

glaciers

display_name: glaciers

last-glacial-maximum

display_name: last-glacial-maximum

orography

display_name: orography

paleo-climate

display_name: paleo-climate

precipitation

display_name: precipitation

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: CHELSA-TraCE21k: Downscaled transient temperature and precipitation data since the last glacial maximum


en: swe snow uas snow-depth remote-sensing

en: HS map Brämabül, 14. April 2015

media_type: image/tiff

en:
10 cm resolution
15 cm accuracy

format: TIFF

mimetype: image/tiff

en: .tfw file

en: coordinates for the .tif raster

en:
This snow depth map was generated 14 January 2015, close to peak of winter accumulation, applying Unmanned Aerial System digital surface models with a spatial resolution of 10 cm. The covered area is 285'000 m2 at the top of Brämabüel, 2490 m a.s.l. covering all expositions. Coordinate system: CH1903LV03.

A detailed description is given here:

Bühler, Y., Adams, M. S., Bösch, R., and Stoffel, A.: Mapping snow depth in alpine terrain with unmanned aerial systems (UASs): potential and limitations, The Cryosphere, 10, 1075-1088, 10.5194/tc-10-1075-2016, 2016.

Abstract:
Detailed information on the spatial and temporal distribution, and variability of snow depth (HS) is a crucial input for numerous applications in hydrology, climatology, ecology and avalanche research. Nowadays, snow depth distribution is usually estimated by combining point measurements from weather stations or observers in the field with spatial interpolation algorithms. However, even a dense measurement network is not able to capture the large spatial variability of snow depth in alpine terrain.
Remote sensing methods, such as laser scanning or digital photogrammetry, have recently been successfully applied to map snow depth variability at local and regional scales. However, such data acquisition is costly, if manned airplanes are involved. The effectiveness of ground-based measurements on the other hand, is often hindered by occlusions, due to the complex terrain or acute viewing angles. In this paper, we investigate the application of unmanned aerial systems (UAS), in combination with structure-from-motion photogrammetry, to map snow depth distribution. Such systems have the advantage that they are comparatively cost-effective and can be applied very flexibly to cover also otherwise inaccessible terrain. In this study we map snow depth at two different locations: a) a sheltered location at the bottom of the Flüela valley (1900 m a.s.l.) and b) an exposed location (2500 m a.s.l.) on a peak in the ski resort Jakobshorn, both in the vicinity of Davos, Switzerland. At the first test site, we monitor the ablation on three different dates. We validate the photogrammetric snow depth maps using simultaneously acquired manual snow depth measurements. The resulting snow depth values have a root mean square error (RMSE) better than 0.07 to 0.15 m on meadows and rocks and a RMSE better than 0.30 m on sections covered by bushes or tall grass. This new measurement technology opens the door for efficient, flexible, repeatable and cost effective snow depth monitoring for various applications, investigating the worlds cryosphere.

remote-sensing

display_name: remote-sensing

snow

display_name: snow

snow-depth

display_name: snow-depth

swe

display_name: swe

uas

display_name: uas

en: UAS based snow depth maps Brämabüel, Davos, CH


maintainer: Leo Gallus Bont

en: geoinformation-system swiss-geodata qgis-plugin digital-planning cable-yarding open-source digital-elevation-model seilaplan swiss-geo-downloader

en: Herunterladen des DHM mit SwissGeoDownloader

en: View video on youtube!

en:
In order to use the QGIS plugin ‘Seilaplan’ for digital cable line planning, a digital terrain model (DTM) is required. The plugin ‘Swiss Geo Downloader’, which is available for the open source geoinformation software QGIS, allows freely available Swiss geodata to be downloaded and displayed directly within QGIS. It was developed in 2021 by Patricia Moll in collaboration with the Swiss Federal Institute for Forest, Snow and Landscape Research WSL. In this tutorial we describe how to download the high accuracy elevation model ‘swissALTI3D’ with the help of the ‘Swiss Geo Downloader’ and how to use it for digital planning of a cable line with the plugin ‘Seilaplan’. Please note that the tutorial language is German!

Link to the Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link to Seilaplan website: https://seilaplan.wsl.ch

*********************

Für die Verwendung des QGIS Plugins Seilaplan zur digitalen Seillinienplanung ist ein digitales Höhenmodell (DHM) nötig. Das Plugin Swiss Geo Downloader, welches für das Open Source Geoinformationssystem QGIS zur Verfügung steht, ermöglicht frei verfügbare Schweizer Geodaten direkt innerhalb von QGIS herunterzuladen und anzuzeigen. Es wurde 2021 von Patricia Moll in Zusammenarbeit mit der eidgenössischen Forschungsanstalt Wald, Schnee und Landschaft WSL entwickelt. In diesem Tutorial beschreiben wir, wie man mit Hilfe des Swiss Geo Downloaders das hochgenaue Höhenmodell swissALTI3D herunterladen und für die Seillinienplanung mit dem Plugin Seilaplan verwenden kann.

Link zum Swiss Geo Downloader: https://pimoll.github.io/swissgeodownloader

Link zur Seilaplan-Webseite: https://seilaplan.wsl.ch

cable-yarding

display_name: cable-yarding

digital-elevation-model

display_name: digital-elevation-model

digital-planning

display_name: digital-planning

geoinformation-system

display_name: geoinformation-system

open-source

display_name: open-source

qgis-plugin

display_name: qgis-plugin

seilaplan

display_name: seilaplan

swiss-geo-downloader

display_name: swiss-geo-downloader

swiss-geodata

display_name: swiss-geodata

en: Seilaplan Tutorial: DTM download with SwissGeoDownloader


en: carbon-storage environmental-gradients biomass-dynamics forest-reserves forest-inventory

en: R markdown document used to download the data files, reproduce the analysis and plot generation.

format: OCTET

en: Climatic space covered by the Swiss National Forest Inventory (NFI) that will be used in Figure 5.

en:
This dataset documents the analyses and the plot generation for the manuscript **Long-term biomass dynamics in temperate forests in Europe after cessation of management**.
We analyse biomass development in an extensive network of 224 plots in 37 natural forest reserves (NFR) covering a wide environmental gradient with mean annual temperatures ranging from 1 to 10.4 °C and mean annual precipitation ranging from 901 to 2317 mm. Forest inventories have been conducted approximately every 10 years during the last 60 years.
It consists of the following files:
+ **Long_term_biomass_script.Rmd**: R markdown document to reproduce the analysis and the plot generation.
+ **dat_biomass.RDS**: Biomass values for each permanent plot at each inventory. This dataset is used for data exploration and for the Biomass model, and to create Figure 2 and Figure 3.
+ **dat_biomass_change.RDS**: Biomass change values between inventories for each permanent plot. It includes the explanatory variables as well. This dataset is used for the Biomass change model and to create Figure 4 and Figure 5.
+ **NFI_climspace_netCDF.RDS**: Climatic space covered by the Swiss National Forest Inventory (NFI) that is used in Figure 5.

biomass-dynamics

display_name: biomass-dynamics

carbon-storage

display_name: carbon-storage

environmental-gradients

display_name: environmental-gradients

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves

en: Long-term biomass dynamics of temperate forests in Europe after cessation of management


maintainer: Stephan Zimmermann

en: fagus-orientalis-lipsky biogeochemical-cycling calcium magnesium potassium

en: Concentrations of Ca, Mg, K, and Na in throughfall, litterflow and soil solution of a Hyrcanian forst in Northern Iran

en:
Throughfall, litterflow and soil solution were sampled during one whole year under five Oriental beech trees in a mixed Hyrcanian beech forest. The amounts of Ca2+, Mg2+, K+ and Na+ in these fluxes were calculated based on their concentrations and the sampled volumes, and subsequently compared with the respective fluxes in the rainfall and soil solution of an adjacent forest gap.
In addition six soil profiles, one close to every single tree and one in the forest gap, were analyzed for pH, CaCO3, organic matter and texture.

biogeochemical-cycling

display_name: biogeochemical-cycling

calcium

display_name: calcium

fagus-orientalis-lipsky

display_name: fagus-orientalis-lipsky

magnesium

display_name: magnesium

potassium

display_name: potassium

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Base cation dynamics in an Oriental beech forest


maintainer: Paraskevi Georgakaki

en: ice-crystal-number-concentration wrf swiss-alps blowing-snow liquid-water-content jungfraujoch ice-water-content secondary-ice-production

en: Observational data

en:
The .zip file contains 6 .csv files including all microphysical measurements taken at the Jungfraujoch station during the two periods of interest:

* 25-28 January 2014 : northwesterly-winds (NW)
* 29 January - 1 February 2014 : southeasterly-winds (SE)

The total Ice Crystal Number Concentration (ICNC; reported in L⁻¹) is measured by the two-dimensional stereo hydrometeor spectrometer (2D-S; Lawson et al., 2006) over the size range 10-1280 μm. The total ice water content (IWC; reported in gm⁻³) is also derived by the 2D-S data using the Brown and Francis (1995) mass-diameter relationship. Finally, the quantification of the liquid water content (LWC; reported in gm⁻³) is based on the liquid droplet size distribution data derived from a DMT cloud droplet probe (CDP; Lance et al., 2010) over the size range 2-50 μm. The frequency of the measurements in the .csv files is 30 min, to match the output frequency of the model. Datetime is also reported in the files (DD/MM/YYYY h:mm) in UTC.

Acknowledgment: Collection and pre-processing of the microphysical measurements has been performed by Gary Lloyd (gary.lloyd@manchester.ac.uk). More details about the instrumentation during the CLACE2014 campaign can be found in Lloyd et al. (2015).

en: WRF outputs

en:
The .zip file contains all the NetCDF outputs produced by the mesoscale Weather Research and Forecasting (WRF) model (version: 4.0.1). Two case studies were simulated in this study, between 25-28 January 2014 (00:00 UTC) and 29 January - 1 February 2014 (00:00 UTC), respectively. The former is denoted as "NW" and the latter as "SE", owing to the prevailing wind conditions at the Jungfraujoch (JFJ) station.

The outputs come from the innermost domain of the simulations with a spatial resolution of 1 km and are extracted from the nearest to JFJ model grid point (46.55°N 7.98°E). The dimensions of each model variable is [145,100], which corresponds to time and height, respectively. The frequency of the outputs is 30 min. Note that the first 24 hours of each simulation (i.e., the first 48 outputs) were considered spin up time.

The following sets of sensitivity simulations were presented in this study:

* CNTRL_NW.nc, CNTRL_SE.nc : Sensitivity simulations performed with the default version of WRF
* DS_PHILL_NW.nc, DS_PHILL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Phillips et al. (2018)
* DS_SULL_NW.nc, DS_SULL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Sullivan et al. (2018)
* PHILL_NW.nc, PHILL_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Phillips et al. (2017)
* TAKAH_NW.nc, TAKAH_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Sullivan et al. (2018) based on Takahashi et al. (1995)
* TAKAHrim_NW.nc, TAKAHrim_SE.nc : Same set-up as before but applied only to collisions between rimed ice particles
* BIPS_Xk0_DY_NW.nc, BIPS_Xk0_DY_SE.nc : Sensitivity simulations including a source of Xk0 (either 10.0 or 100.0 L⁻¹) ice crystals with sizes of DY (either 10 or 100 μm) in the first atmospheric level of the model
* BIPS100_PHILL_NW.nc, BIPS100_PHILL_SE.nc : Sensitivity simulations where the combined effect of blowing snow and ice-ice collisional break-up is examined

en:
This repository contains all WRF model outputs and observational data sets used for the paper:
Georgakaki, P., Sotiropoulou, G., Vignon, É., Billault-Roux, A.-C., Berne, A., and Nenes, A.: Secondary ice production processes in wintertime alpine mixed-phase clouds, Atmos. Chem. Phys. Discuss., https://doi.org/10.5194/acp-2021-760, in review, 2021.

blowing-snow

display_name: blowing-snow

ice-crystal-number-concentration

display_name: ice-crystal-number-concentration

ice-water-content

display_name: ice-water-content

jungfraujoch

display_name: jungfraujoch

liquid-water-content

display_name: liquid-water-content

secondary-ice-production

display_name: secondary-ice-production

swiss-alps

display_name: swiss-alps

wrf

display_name: wrf

en: Data for the publication "Secondary ice production processes in wintertime alpine mixed-phase clouds"


greenland-climate-network-gc-net-data

title_for_slug: greenland-climate-network-gc-net-data

en: automatic-weather-station greenland air-temperature climate aws net-radiation

en: Archived GC-Net Data (deprecated)

en:
The GC-Net is kindly continued by the Geological Survey of Denmark and Greenland (GEUS).

Starting October 3, 2022, the access to the latest versions of the "ready to use" L1 data has been migrated to GEUS, (doi:10.22008/FK2/VVXGUT). Future versions will be available from GEUS, while the initial versions of L0 and L1 data have been archived.

en: GC Net Config for Stations

media_type: application/json

en: Stations Config from the static bucket

format: JSON

en: 22-Petermann ELA

en: GC Net Chart Parameters

en: Stations parameters from static bucket

en: Access the latest L1 data

en:
The GC-Net is kindly continued by the Geological Survey of Denmark and Greenland (GEUS).

Starting October 3, 2022, the access to the latest versions of the "ready to use" L1 data has been migrated to GEUS, (doi:10.22008/FK2/VVXGUT). Future versions will be available from GEUS, while the initial version of L1 data has been archived.

en:
In Memory of Dr. Konrad (Koni) Steffen

Update October 2022: The GC-Net is kindly continued by the Geological Survey of Denmark and Greenland (GEUS).
Starting October 3, 2022, the access to the latest versions of the "ready to use" L1 data has been migrated to GEUS. Future data versions will be available at: [https://doi.org/10.22008/FK2/VVXGUT](https://doi.org/10.22008/FK2/VVXGUT)
 Background
Starting with a single station in 1991, the Greenland Climate Network (commonly known as GC-Net) is a set of Automatic Weather Stations (AWS) set up and managed by the late Prof. Dr. Konrad (Koni) Steffen, and spanning the Greenland Ice Sheet (GrIS). This first station was "Swiss Camp" or the "ETH-CU" camp (GC-Net station 01) which was used as a field science and education site by Koni for years. The GC-Net was expanded with multiple NASA, NOAA, and NSF grants throughout the years, and then supported by WSL in the later years. These data (see "C-file" below) were previously hosted by the Cooperative Institute for Research in Environmental Sciences (CIRES) in Boulder, Colorado.

 Overview
Provided in this dataset are the 16 longest running stations in the network, which are spread over a significant area of the GrIS and the majority of the unique climatic zones. From the South Dome high point in the South, to the Western Jakobshavn ablation region in the west, to the Petermann glacier in the North across east of the Northeast Greenland Ice Stream to the east, GC-Net is the longest running climatological record of Greenland.

 The standard GC-Net station consists of:
* Air temperature measurements at 2 heights above the surface
* Temperature and humidity measurements at 2 heights above the surface
* Wind speed and direction measured at 2 heights above the surface
* Sonic distance sounder measurements for 2 snow height and distance of instruments to surface
* Incoming shortwave radiation measurement
* Reflected shortwave radiation measurement
* Net broadband radiation (long- and short-wave) measurement
* Air pressure measurement
Data have often been repatriated in near-real time using one of either the GOES geostationary satellite or the ARGOS polar orbiting satellite transmission system. The stations were visited typically every 1-2 years for maintenance and service, and to download full uncorrupted data directly from the dataloggers. GC-Net stations were visited by Twin Otter equipped with snow skids to land directly on the open-ice at the AWS locations, or by helicopter near the west coast. The AWSs operate on solar and battery power and occasionally lost power during the dark and cold winter months, particularly when the batteries were aging.

 Dataset
This dataset consists of 2 main data levels; Level 0 and Level 1.
Level 0 is the raw data from the dataloggers, historical processing codes, satellite transmissions, and Koni’s personal data archive. Level 0 data (.zip) directories contain subdirectories:
* “C file” - contains the historical processed datafile for each station.
* “Campbell logger files” - contains the raw csv datafiles from the stations’ Campbell Scientific dataloggers since the CR1000 era (~2007-2008 for most stations).
* “Photos” - contains photographs of the station when available marked by year.
Level 1 is the appended, calibrated, cleaned, and quality flagged data. The full processing scheme is open-source and publicly available on the following GitHub repository (please also check GitHub for the latest L1 data):
[GC-Net L1 data on GitHub](https://github.com/GEUS-Glaciology-and-Climate/GC-Net-level-1-data-processing "GC-Net-level-1-data-processing")
Level 1 data is provided in the newly described csv-compatible [NEAD format](https://www.envidat.ch/#/metadata/nead "NEAD format").

 Additional Details
Dataset description publication will be forthcoming.
The Geological Survey of Denmark and Greenland (GEUS) has been imperative in the reprocessing and continuity mission of GC-Net. Multiple GC-Net stations have been replaced with updated and upgraded AWS hardware at the same coordinates by GEUS. This effort will ensure continuity of the GC-Net dataset into the future.

air-temperature

display_name: air-temperature

automatic-weather-station

display_name: automatic-weather-station

aws

display_name: aws

climate

display_name: climate

greenland

display_name: greenland

net-radiation

display_name: net-radiation

en: Greenland Climate Network (GC-Net) Data


maintainer: Frank Techel

en: avalanche-forecast avalanche-forecasting verification avalanche-bulletin avalanche-danger-level

en: Data for the 2023/2024 forecasting season. It was added on 26 Aug 2024 by F. Techel.

en: D_QC for forecasting seasons 2001/2002 until 2019/2020.

en: D_QC for forecasting seasons 2020/2021 - 2022/2023.

en:
The data set contains the re-analyzed (or quality-checked) regional avalanche danger levels (D_QC) for Switzerland.

D_QC relates to dry-snow avalanche conditions only. Measuring the avalanche danger level D is not possible; forecast, nowcast, and hindcast assessments of D are judgments by humans interpreting data. However, combining several pieces of information indicating the same D, it can be expected that it is more likely that D_QC represents the avalanche conditions well.

For the **forecasting seasons 2001/2002 until 2019/2020**, the approach to obtain D_QC is described in detail in Appendix A of [Pérez-Guillén et. al. (2022)](https://nhess.copernicus.org/articles/22/2031/2022/nhess-22-2031-2022.html).

For the **forecasting seasons 2020/2021 and later**, D_QC is derived using the following approach:
1. *Combination of forecast (D_forecast) and nowcast (D_nowcast)*: If there was only one assessment available by an observer after a day in the field for a region, and if D_forecast = D_nowcast --> D_QC = D_forecast.
2. *Combination of several nowcast assessments (D_nowcast)*: If two (or more) observers agreed (or majority opinion) in their (independent) assessments of D_nowcast after a day in the field in the same warning region. --> D_QC = D_nowcast.
3. *Hindcast analysis (D_hindcast)*: In Switzerland, avalanche forecasters re-evaluate all situations when D = 4 (high) or D = 5 (very high) were either forecast, should have been forecast, or when forecasters discussed given one of these two levels but had not given them. Generally, two forecasters assess each situation. In these cases, D_QC = D_hindcast. The hindcast analysis, only available since the forecasting season 2020/2021, replaces what was step (2) in Appendix A of [Pérez-Guillén et. al. (2022)](https://nhess.copernicus.org/articles/22/2031/2022/nhess-22-2031-2022.html).

All other cases - ties in case of (1) or (2), no new information from the warning region in question, or if no D_hindcast was available - are not considered quality-checked, and are, thus, not contained in the data set.

In addition to D_QC, the file contains information on the elevation and aspect, where D_QC likely prevails.
- The indicated elevation is the mean of the respective elevations in (1), (2), or (3). At danger level 1 (low), when no elevation is indicated in the Swiss forecast, a value of 1500 m is set.
- For the four cardinal aspects N, E, S, and W, a value of 1 means that there was agreement that D was reached in this aspect and a value of 0 means that there was agreement that D was not reached in this aspect. Intermediate values correspondingly mark disagreements in the assessments.

avalanche-bulletin

display_name: avalanche-bulletin

avalanche-danger-level

display_name: avalanche-danger-level

avalanche-forecast

display_name: avalanche-forecast

avalanche-forecasting

display_name: avalanche-forecasting

verification

display_name: verification

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Re-analyzed regional avalanche danger levels in Switzerland


en: mxd paleoclimate tree-ring temperature-reconstruction wood-anatomy

en:
This dataset contains data presented in Figure 2 in the paper "New Prospects for Temperature Reconstructions from Relict Wood Using Tree-Ring Anatomy".

Sample ID = Sample ID
group = living or relict wood material
Bulk wood density = volumetric measured density (kg / m^3)
Mean Tree Ring Density	= Density derived via X-ray densitometry (kg / m^3)
Cellulose_to_wood ratio = Holo-cellulose-to-wood ratio
Anatomical density = Area of cell wall / (area of cell wall + lumen area)

en: This dataset contains the mean chronologies of MXD and QWA of the relict and living wood material presented in Figure 3. It also contains the JJA temperature record of the Salekhard Meteo station.

en: Data (Quantitative Wood Anatomy, Maximum Latewood Density, Volumetric Density, holo-cellulose-to-wood-ratio) used in the manuscript "New Prospects for Temperature Reconstructions from Relict Wood Using Tree-Ring Anatomy". Wood samples stem from Larix sibirica collected in the Yamal region, northeastern Siberia, Russia. We investigated wood properties of living trees and subfossil wood buried in riverbank sediments, dated to approximately -2760 to -2600 BCE. Our goal was to evaluate the integrity of climate proxies in sub-fossil wood and develop practical methods to detect wood degradation when reconstructing Late Holocene and Common Era climate conditions using tree-ring data.

mxd

display_name: mxd

paleoclimate

display_name: paleoclimate

temperature-reconstruction

display_name: temperature-reconstruction

tree-ring

display_name: tree-ring

wood-anatomy

display_name: wood-anatomy

en: Quantitative Wood Anatomy and Maximum Latewood Density from Yamal peninsula


en: natural-avalanches avalanche avalanche-size snowpack-model machine-learning

en: Data set AV2 used for training the avalanche-size estimator (Sections 2.1.2 and 3.2 in Mayer et al.)

en: Data set AV1 was used for training the avalanche-day classifier (Sections 2.1.1, 2.2, and 3.1 in Mayer et al.).

en: Data set DL was used for validation of the avalanche-day classifier and the avalanche-size estimator. The data set contains the quality-checked danger levels merged with the respective SNOWPACK simulations (Sections 2.3 and 3.3(2) in Mayer et al.).

en: Data set AV3 was used for validation of the avalanche-day classifier (Sections 2.1.3 and 3.3(1) in Mayer et al.).

en:
The data set contained in this repository was used in the analysis by Mayer et al. (2023):
Mayer, S. I., Techel, F., Schweizer, J., and van Herwijnen, A.: Prediction of natural dry-snow avalanche activity using physics-based snowpack simulations, EGUsphere, https://doi.org/10.5194/egusphere-2023-646, 2023.

avalanche

display_name: avalanche

avalanche-size

display_name: avalanche-size

machine-learning

display_name: machine-learning

natural-avalanches

display_name: natural-avalanches

snowpack-model

display_name: snowpack-model

en: Data-set for prediction of natural dry-snow avalanche activity and avalanche size using physics-based snowpack simulations


en: swiss-alps arctic glaciers conservation collections permafrost fungi biodiversity plastisphere bacteria extreme-habitat active-layer biobank

en: Complete collection of bacterial and fungal isolates from Permafrost, active layer and glaciers in Switzerland, Svalbard, northern Greenland and Russia.

en:
The cold habitats of the Swiss Alps and the Arctic are undergoing change and are at risk of disappearing completely or partially in the future. Along with them, a poorly known diversity of microorganisms that have adapted to life in these supposedly hostile places. By cryopreserving microorganisms from these habitats, some of today's biodiversity can be preserved in biobanks.
The collection contains cryopreserved bacteria and fungi isolated from permafrost and active layer of Muot da Barba Peider and Val Lavirun, from the glacier forefield and glacier toe of the Damma glacier, from active layer in northern Greenland and from plastic waste in Svalbard, as well as isolates from plastic incubations in Muot da Barba Peider, northern Greenland and arctic Russian soils.
Project overview: https://www.wsl.ch/en/projects/life-at-chilly-temperatures-a-collection-of-microorganisms-from-extreme-habitats/

active-layer

display_name: active-layer

arctic

display_name: arctic

bacteria

display_name: bacteria

biobank

display_name: biobank

biodiversity

display_name: biodiversity

collections

display_name: collections

conservation

display_name: conservation

extreme-habitat

display_name: extreme-habitat

fungi

display_name: fungi

glaciers

display_name: glaciers

permafrost

display_name: permafrost

plastisphere

display_name: plastisphere

swiss-alps

display_name: swiss-alps

en: Life at chilly temperatures - A collection of microorganisms from extreme habitats


maintainer: Dirk Nikolaus Karger

en: bioclim climate climate-layers climatology precipitation climate-change free-climate-data temperature

en: CHELSA Technical Documentation

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en: CHELSA V2.1 (current)

en: CHELSA Version 2.1 based on ERA5 forcings and CMIP6

en: CHELSA V1.2 (deprecated)

en: CHELSA Version 1.2 based on ERA-Interim forcings and CMIP5

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present the CHELSA (Climatologies at high resolution for the earth’s land surface areas) data of downscaled temperature and precipitation to a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperatures. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height, with a subsequent bias correction.

CHELSA data published in EnviDat includes the deprecated version 1.2 (originally published under 10.5061/dryad.kd1d4). Please use the current 2.1 version.

Paper Citation:
 > _Karger DN. et al. Climatologies at high resolution for the earth’s land surface areas, Scientific Data, 4, 170122 (2017) [doi: 10.1038/sdata.2017.122](https://doi.org/10.1038/sdata.2017.122)._

bioclim

display_name: bioclim

climate

display_name: climate

climate-change

display_name: climate-change

climate-layers

display_name: climate-layers

climatology

display_name: climatology

free-climate-data

display_name: free-climate-data

precipitation

display_name: precipitation

temperature

display_name: temperature

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


snow-drift-station-snow-and-air-data

maintainer: Benjamin Walter

title_for_slug: snow-drift-station-snow-and-air-data

en: raclets snow-temperature temperature snow-depth snow-height snow

en: Air Temperature

en: The air temperature (°C) was measured with a Campbell CS-215 which was mounted at a height of 2.2 m above ground. The time is given in UTC+1.

en: Relative Humidity

en: The relative humidity (%) was measured with a Campbell CS-215 at a height of 2.2 m above ground. The time is given in UTC+1.

en: Snow Depth

en: The snow depth (cm) was measured with a Lufft SHM-31 which was mounted at 1.7 m above ground. The time is given in UTC+1.

en: Snow Surface Temperature

en: The snow surface temperature (°C) was measured with a Campbell SI-111 at 0.7 m above ground. The time is given in UTC+1.

en: Snow and air data was monitored at Gotschnagrat (LON: 46.859 LAT: 9.849) by an infrarot radiometer (Campbell SI-111) for snow temperature (°C), a snow height sensor (Lufft SHM-31) for snow height change (cm) and a temperature and humidity sensor (Campbell CS-215) for air temperature (°C) and relative humidity (%). No filter was applied to the sensors and the smapling frequency was 1 Hz.

raclets

display_name: raclets

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-height

display_name: snow-height

snow-temperature

display_name: snow-temperature

en: Snow Drift Station - Snow and Air Data


en: spatial-planning digital-zoning-plans land-use-transformations land-use-simulations land-use-change

en: Legend simulated maps

en:
Table of Content: 1. General context of the data set "LUSzoning”; 2. Background and aims of the study using the data set LUSzoning; 3. The data set LUSzoning.
1. General context of the data set "LUSzoning".
The data set "LUSzoning" stands for Land-use simulations integrating zoning regulations in Spanish functional urban areas. The data set has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2021. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, digital zoning plans) into quantitative land-change modelling approaches at the urban regional level.
2.	Background and aims of the study using the data set “LUSzoning”.
As part of the CONCUR project, a specific task was to integrate planning spatial policies in land-change modelling. Planning can be implemented in modelling using either hard or gradual restrictions. Different studies have addressed the inclusion of spatial planning policies in land-use change modelling. However, the integration of zoning constraints is generally established as hard or Boolean-based restrictions (e.g., whether urban development is allowed or not), while not accounting for the spatial heterogeneity or gradual characteristics within planning zones (e.g., whether planning regulations allow low, medium or high urban density), though these could improve real patterns simulations in urban areas. We assume Spanish General Zoning plans were suitable to explore the integration of planning into land-change modelling as soft constrains because they define land-use intensities in the buildable zoning areas. In light of the above considerations, the overall aim of the study was to model urban land-use changes using a multi-scenario approach that integrates digitized zoning plans for the Functional Urban Areas (FUAs) of Madrid, Barcelona, Valencia, and Zaragoza. The following specific objectives were addressed: i) to analyse the role of planning by defining three future scenarios that integrate digitized zoning plans and one scenario that assumes almost no planning intervention; ii) to introduce zoning constraints that reflect different degrees of urban densities; iii) to generate a transferable spatially-explicit modelling framework to integrate planning into land-use change simulations.
Four future land-use demands scenarios were defined for the FUAs. Storylines were created considering probable development scenarios related to zoning plans, current Spanish legislation and sustainability goals defined along two axes: a high market-oriented vs. high planning-intervention axis, and an axis of short-term economic growth vs. long-term sustainable growth. The sustainable development scenario (S1) is characterized by low gross floor area (GFA) growth that is limited to areas that are currently under development according to zoning plans. The business-as-usual scenario (S2) is characterized by medium GFA growth in the range of on-going trends. The strong development scenario (S3) is characterized by high GFA growth rates. Growth is restricted to buildable areas without urbanization project designated in zoning plans. The unrestricted development scenario (S4) prioritizes a high degree of market liberalization characterized by high GFA growth that surpasses population demands. S4 follows a rapid economic growth pattern with almost no planning intervention.
3.	 The data set “LUSzoning”.
The dataset includes 16 .asc raster layers providing the simulated land-uses under four defined scenarios for Barcelona, Madrid, Valencia and Zaragoza Functional Urban Areas (FUAs) for 2030. The simulated raster layers were created using CLUMondo simulation framework and have a spatial resolution of 30m. The .asc layers name include the name of the FUA and scenario number. For example, the output from simulating the urban growth for the city of Zaragoza under Scenario 2 is named “Zaragoza_S2.tif”. Furthermore, a .txt file named “Legend.txt” includes the numeric value of the land-use and the category of land-use that represents to interpret the .asc raster layers. The name of the land-use classes is a reclassification of the Urban Atlas 2012 land-use classes within the four Spanish FUAs analyzed.

digital-zoning-plans

display_name: digital-zoning-plans

land-use-change

display_name: land-use-change

land-use-simulations

display_name: land-use-simulations

land-use-transformations

display_name: land-use-transformations

spatial-planning

display_name: spatial-planning

en: LUSzoning: Land-use simulations integrating zoning regulations in Spanish functional urban areas


en: winter-energy-production albedo photovoltaic snow shortwave-radiation

en: Data Forward Scattering

en: GROUNDEYE model for multiple forward scattering in snow-covered terrain. Meteorological and topographical input data set for the Meierhofertäli near Davos, Switzerland, September 2017 - August 2018. Output data for September 2017 - August 2018 at hourly resolution and every pixel. Post-processing scripts for plotting and analysis.

en:
 Overview
We present GROUNDEYE, a new model of radiative transfer over mountainous terrain, which considers for the first time the forward scattering properties of snow.
Embedded in the surface process model Alpine3D, the new terrain radiation model GROUNDEYE receives interpolated real weather data with diffuse and direct broadband shortwave radiation for each pixel as well as a spatially variable plane albedo from the module SNOWPACK.

 Format
The GROUNDEYE model is written in c++, as is the entire environment of Alpine3d. The input and output data sets are .xlsx or .txt format, pre- and postprocessing including the generation of all figures is in .R format.

 Structure
In Data_Forward_Scattering.zip you will find all necessary data and model details to
reproduce the results of the JGR publication "How forward-scattering snow and terrain change the Alpine radiation balance with application to solar panels"

 - 	Model Input Data contains the meteorological and topographic input data sets, the BRDF, and preprocessing scripts.
 - Model Code contains the full model Alpine3d including the radiative transfer module GROUNDEYE.
 - Model Output Data contains the results of the simulation of terrain irradiance and irradiance of solar panels; hourly resolution, 1. Sptember 2017 - 31. August 2018.
 - Measurements Solar Testsite contains information and measurements of the solar testsite at the Totalp near Davos, Switzerland.
 - Postprocessing contains all R-Scripts used for the analysis and
plotting of the corresponding data.

In each of these folders you will find detailed information in
the file 'About this Folder.txt'.

albedo

display_name: albedo

photovoltaic

display_name: photovoltaic

shortwave-radiation

display_name: shortwave-radiation

winter-energy-production

display_name: winter-energy-production

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Data, Code Link and Metadata on Forward Scattering of Snow at Totalp


lidar-davos-wolfgang

maintainer: Patric Seifert

title_for_slug: lidar-davos-wolfgang

en: polly clouds raclets tropos lidar

en: Raman Lidar Davos

en: A portable Raman lidar system (Polly) from Leibnitz Institute for Tropospheric Research (Tropos) was deployed at Davos Wolfgang (LON: 9.853594, LAT: 46.835577). Please use this [link](http://polly.tropos.de/?p=lidarzeit&Ort=39), to be directly forwarded to the Davos location and select the date of interest from the calendar (bold numbers). The data can be requested directly at the Polly team.

clouds

display_name: clouds

lidar

display_name: lidar

polly

display_name: polly

tropos

display_name: tropos

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: LIDAR Davos Wolfgang


en: preferential-deposition lidar tls alpine3d lee-side-flow-field

en: Dataset

en:
The data presented here corresponds to the publication "A Close-Ridge Small-Scale Atmospheric Flow Field and its Influence on Snow Accumulation" (Gerber et al., 2017), which investigates an eddy-like structure in the vicinity of the Sattelhorn in the Dischma valley (Davos Switzerland) and its influence on snow accumulation. The dataset contains:

* Alpine3D: Alpine3D snow depth grids (25 m resolution) for two simulations with and without snow redistribution.
* ARPS: 10 ARPS simulations (25 m horizontal resolution) with different model setups (wind direction, wind speed, stability).
* LiDAR: Processed LiDAR PPI (D2_PPI_1h) and RHI (D2_cross_1h) across the valley with a hourly resolution for the period 27 October 2015 01:00 - 29 October 2015c 21:00 (spatial resolution: 25 m).
* meteostations-dischma: Meteorological station data of two meteorological stations in the Dischma valley with 10 minute resolution for the period 28 October 2015 - 30 October 2015.
* TLS: Snow depth change data (m) between 28 October 2015 and 30 October 2015 based on terrestrial laser scans.

For more details about the simulation and observation data, see Gerber et al., 2017.

Publication: Gerber et al., 2017: A Close-Ridge Small-Scale Atmospheric Flow Field and its Influence on Snow Accumulation, submitted to JGR - Atmospheres.

lee-side-flow-field

display_name: lee-side-flow-field

preferential-deposition

display_name: preferential-deposition

tls

display_name: tls

en: DISCHMEX - Observations and simulations of the close-ridge small-scale atmospheric flow field and snow accumulation at Sattelhorn, Dischma valley, Davos, Switzerland.


en: model-calibration-data snow-depth snow-water-equivalent snow-density model-validation-data

en: swe2hs calibration and validation data

en:
 Contents of this archive

 README.md

 A readme file containing a description of the other files.

 automatic_stations_validation_data.csv

 Daily data from the automatic weather stations used for validation.

 Data sources and providers are listed in the SWE2HS paper, Table 1.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * site_id: code for the measurement site
  - HS_interpolated: boolean flag for interpolated values
  - SWE_interpolated: : boolean flag for interpolated values

 coordinates_swe2hs_paper_stations.csv

 Coordinates of all measurement sites used in the SWE2HS paper.

 Columns:

  * site_id: code for the measurement site
  * location_name: location name of the measurement site
  * lon_[wgs84]: longitude in WGS84
  * lat_[wgs84]: latitude in WGS84
  * elevation_[m]: atitude of the measurement site in [m]
  * dataset: dataset in which the station is included

 manual_station_calibration_data.csv

 Calibration data from the Swiss manual observer stations. Long station records
 trmmed to 15 random water-years.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * SWE_from_profile_[m]: biweekly measurement from the SWE in the measurement
   pit. Corrected with the bulk density in order to match the snow depth from
   the measurement stake. Please refer to the paper for further details.
  * site_id: code for the measurement site

 manual_stations_validation_data.csv

 Validation data from the Swiss manual observer stations. Remaining water-years
 from the long sttaion record not used for the calibration data.

 Columns:

  * date: timestamp of the format YYYY-MM-DD
  * HS_[m]: snow depth in [m]
  * SWE_[m]: snow water equivalent in [m]
  * SWE_from_profile_[m]: biweekly measurement from the SWE in the measurement
   pit. Corrected with the bulk density in order to match the snow depth from
   the measurement stake. Please refer to the paper for further details.
  * site_id: code for the measurement site

 manual_stations_used_deltasnow_parameters.csv

 Site specific DeltaSNOW model parameters used for the calculation of the daily
 SWE series in 'manual_stations_calibration_data.csv' and
 'manual_stations_validation_data.csv'.

 Parameters were optimized by reducing RMSE to the biweekly snow pit SWE measurements.
 Please refer to the paper for further details.

 A python implementation of the DeltaSNOW model was used for the calculation:
 pydeltasnow (https://pypi.org/project/pydeltasnow/)

 For a detailed description of the DeltaSNOW model parameters please see the
 respective publication:

 Winkler, M., Schellander, H., & Gruber, S. (2021). Snow water equivalents
 exclusively from snow depths and their temporal changes: the Δ snow model.
 Hydrology and Earth System Sciences, 25(3), 1165-1187.

 Columns:

  * site_id: code for the measurement site
  * rho_max: Maximum density of an individual snow layer produced by the DeltaSNOW model in [kg/m3]
  * rho_null: Fresh snow density for a newly created layer [kg/m3
  * c_ov: Overburden factor due to fresh snow [-]
  * k_ov: Defines the impact of the individual layer density on the compaction due to overburden [-]
  * k: Exponent of the exponential-law compaction [m3/kg]
  * tau: Uncertainty bound [m]
  * eta_null: Effective compactive viscosity of snow for “zero-density” [Pa s]

en:
The data in this repository was used for the calibration and validation of the
SWE2HS model in the following publication:
Aschauer, J., Michel, A., Jonas, T., & Marty, C. (2023). An empirical model to calculate snow depth from daily snow water equivalent: SWE2HS 1.0. Geoscientific Model Development Discussions, 1-19. https://doi.org/10.5194/gmd-2022-258
Contains daily snow water equivalent and snow depth timeseries from stations in the European Alps.

model-calibration-data

display_name: model-calibration-data

model-validation-data

display_name: model-validation-data

snow-density

display_name: snow-density

snow-depth

display_name: snow-depth

snow-water-equivalent

display_name: snow-water-equivalent

en: SWE2HS model calibration and validation data


maintainer: Axel Volkwein

en: rockfall natural-hazard field-tests experiments mass-movements rockfall-experiments field-test field-data experiment impact-testing

en: Raw data (high speed videos, acceleration measurements, laboratory tests)

en:
This file contains

* the high speed videos showing the concrete blocks impacting the gallery roof.
* the raw data of the acceleration measurements
* the data of Tiefbauamt Graubünden containg the tension tests of gallery reinforcment, ME-testing the cushion layer and the tests on concrete samples.

en: Acceleration measurements

en: The zip file contains five excel files, one for each test conducted. The first sheet contains the raw data and a data set that went through a low-pass filter. The sheet "Allgemein" contains calibration factors for the sensors and time details of a test. The sheets "DiaDaten" and "DiaDatenGefiltert" show the measurements over time. The block and slab kinetics are determined in the sheets "ZeitintegrationBlock" and "ZeitintegrationPlatte". The sheet "VergleichBeschleunigungen" shows the influence of the low-pass-filter and a running average filter on the block accelerations.

en: Video analysis

en: The zip contains five Excel-files that in turn contain the results of the performed video analyses. The sheet "Daten" contains the pixels of different positions on the blocks that were tracked by the software "Kinovea". The sheet "Auswertung" determines the block kinetics based on the pixel data over time.

en: Five full-scale field tests were conducted with concrete blocks weighting between 800 and 3200 kg being dropped onto the roof of a gallery structure made from reinforced concrete. The impacts were recorded using high-speed video and acceleration measurements at the falling blocks. The dataset contains the raw data as well as the analyses of the block trajectories, i.e. kinetics and dynamics. Setup of the measurements and the analyses conducted are published in Volkwein, A. "Durchführung und Auswertung von Steinschlagversuchen auf eine Stahlbetongalerie", WSL-Berichte, Heft 68, 2018.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

impact-testing

display_name: impact-testing

mass-movements

display_name: mass-movements

natural-hazard

display_name: natural-hazard

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

educ

en: Education, culture and sport

en: Rockfall gallery testing Parde 2016


global-cryosphere-watch-data-survey

maintainer: Mathias Bavay

title_for_slug: global-cryosphere-watch-data-survey

en: data-portal data-usage gcw data-exchange automatic-publication

en: Data interoperability survey

en: Third party data usage

en: Two surveys on the topic of data usage where conducted for the Global Cryosphere Watch data portal. The first one focused on the data provider point of view while the second one focused on the data user point of view. 37 data providers (ie institutions) worldwide provided their answers for the first survey (from fall 2017 until summer 2018) while 54 users (contacted through various mailing list such as the Cryolist) answered the questions on their third party data usage (fall 2019 until January 2020).

automatic-publication

display_name: automatic-publication

data-exchange

display_name: data-exchange

data-portal

display_name: data-portal

data-usage

display_name: data-usage

gcw

display_name: gcw

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Global Cryosphere Watch data survey