maintainer: James W. Kirchner

en: stable-water-isotopes plynlimon catchment precipitation deuterium tracer streamflow chloride

en: Data Set Documentation

en: This file contains a documentation of the data sets, including references to other helpful documentations.

en: Weekly stable water isotopes

en: Data set of weekly stable water isotope data collected at Carreg Wen (precipitation) and Lower Hafren and Tanllwyth (streamflow).

mimetype: text/plain

en: 7-hourly stable water istopes

en: Data set of 7-hourly stable water isotope data measured at Carreg Wen (precipitation) and Upper Hafren (streamflow).

en: The data base contains timeseries of stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK. One data set contains weekly stable water isotope data from the Lower Hafren and Tanllwyth catchments, and the other data set contains 7-hourly stable water isotope data from Upper Hafren. Both data sets also include chloride concentrations in precipitation and streamflow.

catchment

display_name: catchment

chloride

display_name: chloride

deuterium

display_name: deuterium

plynlimon

display_name: plynlimon

precipitation

display_name: precipitation

stable-water-isotopes

display_name: stable-water-isotopes

streamflow

display_name: streamflow

tracer

display_name: tracer

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK


maintainer: EnviDat Support

en: albedo shortwave-radiation photovoltaic snow winter-energy-production

state: active

type: dataset

en: Data Forward Scattering

en: GROUNDEYE model for multiple forward scattering in snow-covered terrain. Meteorological and topographical input data set for the Meierhofertäli near Davos, Switzerland, September 2017 - August 2018. Output data for September 2017 - August 2018 at hourly resolution and every pixel. Post-processing scripts for plotting and analysis.

format: SERVICE

en:
 Overview
We present GROUNDEYE, a new model of radiative transfer over mountainous terrain, which considers for the first time the forward scattering properties of snow.
Embedded in the surface process model Alpine3D, the new terrain radiation model GROUNDEYE receives interpolated real weather data with diffuse and direct broadband shortwave radiation for each pixel as well as a spatially variable plane albedo from the module SNOWPACK.

 Format
The GROUNDEYE model is written in c++, as is the entire environment of Alpine3d. The input and output data sets are .xlsx or .txt format, pre- and postprocessing including the generation of all figures is in .R format.

 Structure
In Data_Forward_Scattering.zip you will find all necessary data and model details to
reproduce the results of the JGR publication "How forward-scattering snow and terrain change the Alpine radiation balance with application to solar panels"

 - 	Model Input Data contains the meteorological and topographic input data sets, the BRDF, and preprocessing scripts.
 - Model Code contains the full model Alpine3d including the radiative transfer module GROUNDEYE.
 - Model Output Data contains the results of the simulation of terrain irradiance and irradiance of solar panels; hourly resolution, 1. Sptember 2017 - 31. August 2018.
 - Measurements Solar Testsite contains information and measurements of the solar testsite at the Totalp near Davos, Switzerland.
 - Postprocessing contains all R-Scripts used for the analysis and
plotting of the corresponding data.

In each of these folders you will find detailed information in
the file 'About this Folder.txt'.

albedo

display_name: albedo

photovoltaic

display_name: photovoltaic

shortwave-radiation

display_name: shortwave-radiation

snow

display_name: snow

winter-energy-production

display_name: winter-energy-production

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Data, Code Link and Metadata on Forward Scattering of Snow at Totalp


en: land-use-abandonment disturbance vascular-plant biodiversity grassland-management

en: Boch et al. - Vegetation records Alpengarten Schynige Platte 2010-2015.xlsx

en: Vegetation records (species lists, percentage cover of species) of a six-year experiment to test whether different land-use treatments affect species diversity and composition in alpine to subalpine graslands.

format: XLS

en: This dataset was used for the publication "Boch, Blaser, Föhr, Küchler, Fischer (2024) Haymaking complemented by moderate disturbances can sustain and restore species-rich alpine to subalpine grasslands" in Alpine Botany. It contains vegetation records (species lists, percentage cover of species) of six grassland sites with each five 2x2 m treatment plots established in the Schynige Platte Alpine Botanical Garden. In a six-year experiment, we tested the response of plant species richness and mean ecological indicator values that we calculated from this dataset, to management treatments ranging from combined haymaking and scraping, to haymaking or scraping alone, to complete abandonment. We further tested whether the treatments led to changes in species composition, i.e. shifts to different vegetation types.

biodiversity

display_name: biodiversity

disturbance

display_name: disturbance

grassland-management

display_name: grassland-management

land-use-abandonment

display_name: land-use-abandonment

vascular-plant

display_name: vascular-plant

en: Schynige Platte Alpine Botanical Garden land-use experiment


maintainer: Christian G. Sommer

en: wind-tunnel wind-packing wind-crust kinect snow

en: README

media_type: text/plain

en: Describes the dataset in detail

format: TXT

en: Processing scripts

media_type: application/zip

en: Contains the Matlab- and R-scripts used to process the Kinect data

format: ZIP

mimetype: application/zip

en: Kinect data

en: Links to the dataset

en:
This data sets contains the Microsoft Kinect data from 15 wind tunnel experiments on wind-packing / wind crust formation. These experiments were performed in the winter 2016/17. The Kinect measures distributed snow depth.

The Kinect data is organized per experiment. Each experiment subfolder contains the processed Kinect depth images and some additional files.

Please refer to the README for more details on the data. The processing scripts are available for download as well. The scripts are mainly provided as documentation and would need to be adjusted to be used.

This dataset is the basis of the following publication:

Sommer C.G., Lehning M. & Fierz C. (2018). Wind Tunnel Experiments: Influence of Erosion and Deposition on Wind-Packing of New Snow. Front. Earth Sci. 6:4. doi: 10.3389/feart.2018.00004

kinect

display_name: kinect

wind-crust

display_name: wind-crust

wind-packing

display_name: wind-packing

wind-tunnel

display_name: wind-tunnel

en: Wind crust formation: Microsoft Kinect data


en: meteoswiss complex-terrain high-resolution cosmo-wrf numerical-simulation

en: COSMO-WRF documentation v1.0

media_type: application/pdf

en:
Gerber, Franziska; Sharma, Varun (2018). Running COSMO-WRF on very-high resolution over complex terrain. EnviDat. doi:10.16904/envidat.35

Documentation about the procedure to run COSMO-WRF

format: PDF

mimetype: application/pdf

en: WPSSetup

en: Scripts that need to be changed to compile WPS (see COSMOWRFdocumentation.pdf, Section 4)

en: Postprocessing

en: Postprocessing scripts to map WRF output on swiss coordinates (see Section 7 in COSMOWRFdocumentation.pdf)

en: MeteorologicalData

en: Scripts to process meteorological data (see Section 2 in COSMOWRFdocumentation.pdf).

en: WRFrun

en: Scripts to run COSMO-WRF simulation (see Section 6 in COSMOWRFdocumentation.pdf)

en: StaticData

en:
Scripts to process geographical/static data (see Section 3 in COSMOWRFdocumentation.pdf).
- ascii_to_bin_landuse.f90
- ascii_to_bin_soiltype.f90
- ascii_to_bin_topo_wgs84_ws2sf1.f90
- see_slopes.ncl
- soiltype_writing.py
- toposmooth_wgs84_cosmobound.ncl
- write_geogrid.o

en: WPSrun

en: Scripts to run the WRF pre-processing (WPS) for COSMO-WRF simulation (see Section 5 in COSMOWRFdocumentation.pdf)

en: This is a technical documentation of the procedure to run the Weather Research and Forecasting (WRF) model over complex alpine terrain using Consortium for Small-Scale Modeling (COSMO) reanalysis by the Federal Office of Meteorology and Climatology (MeteoSwiss) as initial and boundary conditions (COMSO-WRF). The setup is adapted for very high resolution simulations based on COSMO-2 (2.2 km resolution) reanalysis. This document gives an overview over steps to setup COSMO-WRF and adaptations needed to run COSMO-WRF. Additionally, the calculation of precipitation rate at a horizontal plane and remapping COSMO-WRF output on Swiss coordinates are documented.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

high-resolution

display_name: high-resolution

meteoswiss

display_name: meteoswiss

numerical-simulation

display_name: numerical-simulation

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Michael Lehning

en: Data Source

en: Coordinates of Grid Points

en: Description

en: Full Data Description

en: Hourly Gridded Wind Power Time Series

en:
This dataset consist of simulated hourly power production from an Enercon E82 Turbine at 100 m hub-height. It describes the hourly power output a 1MW turbine would produce in each 0.01° grid cell for the years 2016 and 2017.

100 m wind speed data was taken from the COSMO-1 model (Consortium for Small-scale Modeling 2017), which has a 0.01° horizontal resolution. The domain covered is the whole of Switzerland, with the exclusion of lakes. As such, the number of 0.01◦ pixels within Switzerland amounts to 48657.
Conversion to power output was done based on the power curve of the Enercon E82 Turbine. As power output is lower at altitude due to lower air density, we corrected for this effect as described in (Kruyt et al. 2017).

Please cite the following paper in connection with the dataset:

Paper Citation:
 > _Bert Kruyt, Jérôme Dujardin, and Michael Lehning: Improvement of wind power assessment in complex terrain: The case of COSMO-1 in the Swiss Alps, Front. Energy Res., [doi:10.3389/fenrg.2018.00102] (https://doi.org/10.3389/fenrg.2018.00102)_

mountain-wind-potential

display_name: mountain-wind-potential

topography

display_name: topography

wind-energy

display_name: wind-energy

educ

en: Education, culture and sport

en: Dataset on Cosmo-1 based Energy Potential in Swiss Alps


en: single-tree lidar forest-inventory tree-volume biomass terrestiral-laserscanning

en: Individual tree parameters and volume estimates based on TLS point clouds and allometric models

media_type: text/csv

en:
"ASM" denotes volume estimates calculated by allometric scaling models (as used in Swiss NFI), based on tree height, DBH and D7.
"QSM" denotes volume estimates derived from TLS point clouds by quantitative structure models (QSM).
The remaining variables are geometrical features directly calculated from single tree TLS point clouds.
For more detailed variable descriptions see related publication.

format: CSV

en:
 Dataset
This dataset is based on terrestrial laser scanning (TLS) data acquired during winter 2020/2021 in leaf-off conditions, with a Leica BLK 360 instrument following a tree-centric scanning pattern.
The data was acquired on two sites (47.42°N 8.49°E and 47.504°N, 7.78°E), both of which were managed mixed temperate forest stands.
Individual trees were semi-automatically segmented from the co-registered TLS point clouds.

 Background
Accurate estimates of individual tree volume or biomass within forest inventories are essential for calibration and validation of biomass mapping products based on Earth observation data.
Terrestrial laser scanning (TLS) enables detailed and non-destructive volume estimation of individual trees, with existing approaches ranging from simple geometrical features to virtual 3D reconstruction of entire trees. Validating such approaches with weight measurements is a key step before the integration of TLS or other close-range technologies into operational applications such as forest inventories.
In this study, we firstly evaluate individual tree volume estimation approaches based on 3D reconstruction through quantitative structure models (QSM) against destructive reference data of 60 trees and compare them to operational allometric scaling models (ASM).
Secondly, we determine the explanatory power of TLS-derived geometric parameters regarding total tree, stem, coarse wood and fine branch volume.

biomass

display_name: biomass

forest-inventory

display_name: forest-inventory

lidar

display_name: lidar

single-tree

display_name: single-tree

terrestiral-laserscanning

display_name: terrestiral-laserscanning

tree-volume

display_name: tree-volume

en: Individual tree TLS point clouds for tree volume estimation


maintainer: Anita C. Risch

en: nutrient-network nitrification herbivore soil climate grassland mineralization global-change nitrogen fertilization ammonification

en: Risch et al. 2020 - Raw data for publication "Global impacts of fertilization and herbivore removal on soil net nitrogen mineralization are modulated by local climate and soil properties"

en:
we assessed how the removal of mammalian herbivores (Fence) and fertilization with growth-limiting nutrients (N, P, K, plus nine essential macro- and micronutrients; NPK) individually, and in combination (NPK+Fence), affected potential and realized soil net Nmin across 22 natural and semi-natural grasslands on five continents. Our sites spanned a comprehensive range of climatic and edaphic conditions found across the grassland biome. We focused on grasslands, because they cover 40-50% of the ice-free land surface and provide vital ecosystem functions and services. They are particularly important for forage production and C sequestration. Worldwide, grasslands store approximately 20-30% of the Earth’s terrestrial C, most of it in the soil (Schimel, 1995; White et al., 2000).

Study sites and experimental design
The 22 sites contributing to this project are part of the Nutrient Network Global Research Cooperative (NutNet, https://nutnet.umn.edu/). Mean annual temperature across our 22 sites ranged from -4 to 22°C, mean annual precipitation from 252 to 1,592 mm, and elevations from 6 to 4,261 m above sea level (Fig. 1, Supplementary Table S1). Soil organic C varied from 0.8 to 7.8%, soil total N from 0.1 to 0.6%, and the soil C:N ratio from 9.1 to 21.5. Soil clay content spanned from 3.0 to 35%, and soil pH from 3.4 to 7.6 (Supplementary Table S2). Thus, the sites covered a wide range of environments in which grasslands occur (Fig. 1, Supplementary Table S1 & S2).
At each site, the effects of nutrient addition and herbivore removal were tested via a randomized-block design (Borer et al., 2014; Supplementary Fig. S1a). Three replicate blocks with 10 treatment plots each were established at each site, with the exception of the site at bldr.us, where only two blocks were established (Supplementary Fig. S1a). The 10 plots were randomly assigned to a nutrient or fencing treatment, but only a subset of four plots was used in the current study, each with a different treatment (see below; Supplementary Fig. S1a). All plots were 5 x 5 m and divided into four 2.5 x 2.5 m subplots (Supplementary Fig. S1b). Each subplot was further divided into four 1 x 1 m square sampling plots, one of which was set aside for soil sampling (Borer et al., 2014; Supplementary Fig. S1b). Plots were separated by at least 1 m wide walkways.
In this study, we collected data from the following four treatments: (i) untreated control plots (Control), (ii) herbivore removal plots (Fence), (iii) plots fertilized with N, P, K, plus nine essential macro and micronutrients (NPK), and (iv) plots with simultaneous fertilizer addition and herbivore removal (NPK+Fence; Supplementary Fig. S1a). The number of years of treatment differed among sites (2 – 9 years since start of treatment; Supplementary Table S1). For the nutrient additions, all sites applied 10 g N m-2 yr-1 as time-release urea; 10 g P m-2 yr-1 as triple-super phosphate; 10 g K m-2 yr-1 as potassium sulfate. A micro-nutrient mix (Fe, S, Mg, Mn, Cu, Zn, B, Mo, Ca) was applied at 100 g m-2 together with K in the first year of treatments but not thereafter.
The vertebrate herbivore removal treatment (Fence) was established by fencing two plots, one control and one NPK plot, within each of the blocks (Supplementary Fig. S1a). We designed the fences so that they would effectively exclude aboveground mammalian herbivores with a body mass of over 50 g (Borer et al., 2014). At the majority of sites, the height of the fences was 180 cm, and the fence design included wire mesh (1 cm holes) on the first 90 cm along with a 30 cm outward-facing flange stapled to the ground to exclude burrowing animals; climbing and subterranean animals may potentially still access these plots (Borer et al., 2014). For slight modifications in fence design at a few sites see Supplementary Table S3. While most sites only had native herbivores, a few sites (4) were also grazed by domestic animals (Supplementary Table S1).
Potential and realized soil net N mineralization, ammonification, nitrification and other soil properties
Each site participating in the study received a package containing identical material from the Swiss Federal Institute for Forest, Snow and Landscape Research (WSL) to be used for sampling and on-site N incubations. For the field incubation, we followed the protocol by Risch et al. (2015, 2019). Briefly, we drove a 5 x 15 cm (diameter x depth) steel cylinder 13.5 cm deep into the soil after clipping the vegetation at randomized locations in each plot. The top 1.5 cm of the cylinder remained empty to capture incoming N from run-off or deposition with a polyester mesh bag (mesh-size 250 µm) filled with 13.2 ± 0.9 g of acidic and alkaline exchanger resin (1:1 mixture; ion-exchanger I KA/ion-exchanger III AA, Merck AG, Darmstadt). The bag was fixed in place with a metal Seeger ring (Bruetsch-Rüegger Holding, Urdorf, Switzerland). We then removed 1.5 cm soil at the bottom of the cylinder and placed another resin bag to capture N leached from the soil column. The exchange resin was saturated with H+ and Cl- prior to filling the bags by stirring the mixture in 1.2M HCl for 1 h and then rinsing it with demineralized water until the electrical conductivity of the water reached 5 μS/cm. The cylinders were then re-inserted into the cored hole, level with the soil surface, and incubated for an average of 42 days (range 40 to 57days). The individual site coordinators chose the timing of incubation to start approximately six weeks prior to peak plant biomass production. All incubations were completed between February 2015 and January 2016 accounting for differences in growing season between northern and southern hemispheres. At the end of the incubation, the cylinders were re-collected and immediately shipped to WSL in an insulated box together with cold packs to halt further mineralization. Gloves were worn at all times to avoid contamination of the samples. Upon arrival at WSL, we extracted the resin bags and a 20 g subsample of sieved soil (4 mm) separately in a 100 ml PE-bottle with 80 ml 1 M KCl for 1.5 h on an end-over-end shaker and filtered through ashless folded filter paper (DF 5895 150, ALBET LabScience). We measured NO3- (colorimetrically; Norman & Stucki, 1981) and NH4+concentrations (flow injection analysis; FIAS 300, Perkin Elmer) on these filtrates.
At the start of the field incubation, we additionally collected two soil cores of 5 x 12 cm (diameter x depth) in each sampling plot and composited them to measure potential soil net Nmin, soil chemical and biological properties (see below). We also collected an additional sample (5 x 12 cm) to assess soil physical properties, which remained within the steel cylinder. Both ends were tightly closed with plastic caps. Cores were carefully packed to avoid further disturbance, and together with the composited soil samples, were shipped to the laboratory at WSL within a few days after collection.
From the composited samples, we extracted an equivalent of 20 g dry soil with KCl, as described above, and measured NO3- and NH4+concentrations. Realized soil net Nmin was then calculated as the difference between the inorganic N content of samples collected at the end of the incubation (plus N extracted from the bottom resin bag) and the N content at the beginning of the incubation; values were scaled to represent daily mineralization rates (mg N kg-1soil d-1; Risch et al., 2015). Realized soil net Nmin values represent an average period of 42 days prior to peak biomass, typically the highest period of biological activity, and not the entire year (Risch et al., 2019).
A second subsample of the composited sample was used to determine potential soil net Nmin in the laboratory (Risch et al., 2019). Briefly, we weighed duplicate samples (8 g dry soil) into 50-ml Falcon tubes. Soil moisture was brought to 60% of the field capacity of each plot, the Falcon tubes tightly closed and then incubated at 20°C for 42 days in a dark room. Every week the Falcon tubes were opened and ventilated. At the end of the incubation, the soil samples were extracted the same way as described above and NO3- and NH4+ was determined. Potential soil net Nmin was calculated as the difference between the N content before and after the incubation and scaled to represent daily values (mg N kg-1soil d-1). Using our NO3- and NH4+ measures we also calculated potential and realized soil net nitrification and soil net ammonification to be able to better understand the drivers of fertilization and herbivore removal effects on potential and realized soil net Nmin.
A third subsample of the composite soil sample was sieved (2 mm mesh) and microbial biomass (μg Cmic g-1 soil dry weight) was estimated by measuring the maximal respiratory response to the addition of glucose solution (4 mg glucose per g soil dry weight dissolved in distilled water; substrate-induced respiration method) on approximately 5.5 g of soil (Anderson & Domsch, 1978). The rest of the composited sample was dried at 65°C for 48 h, ground and sieved (2 mm mesh) to assess a series of soil chemical properties (Risch et al., 2019). We measured the percentage of clay as an indicator of soil texture (Gee & Bauder, 1986; Risch et al., 2019).
Statistical analyses
Potential and realized soil net Nmin were square root transformed to account for a highly skewed data distribution (yt = sign(y)*sqrt|y|; negative values in the data set impeded log transformation). To assess treatment effects on potential and realized soil net Nmin, we used linear mixed effects models (LMMs) fitted by maximum likelihood using the lme function from the nlme package (version 3.131.1; Pinheiro et al., 2016), R version 3.6.1; R Foundation for Statistical Computing. Treatment (Control, Fence, NPK, NPK+Fence) was a fixed factor, with site and block as random factors, where block was nested within site. We also tested for effects of time since start of treatments in preliminary analyses by adding total treatment years as an additional fixed factor. We did not find a significant effect of years of treatment, and thus dropped this variable from the models. The LMMs were corrected using varIdent if the homogeneity of variance criterion was not met (Pinheiro et al., 2016). To visualize our results, we calculated treatment effects using Cohens’ d statistic (Cohen, 1977; Koricheva et al., 2013). Note that calculating response ratios (or log response ratios) was not possible with our data, as we have both negative and positive values. We also fitted LMMs for potential and realized soil net ammonification and nitrification to gain more insight into how global change affects the processes underpinning potential and realized soil net Nmin. We also sqrt-transformed (see above) these dependent variables. Treatment was included as a fixed factor with random factors as described above. In addition, we assessed how potential and realized soil net Nmin were related to potential and realized soil net ammonification and nitrification, respectively. For this, we calculated site averages for each treatment separately. We then ran LMMs, with potential and realized soil net Nmin as the dependent variable, potential and realized soil net ammonification/nitrification as the independent ones. Site was included as a random factor.
Based on our previous work (Risch et al., 2019) and the existing literature (Schimel & Bennett, 2004; Liu et al., 2017), we developed a priori causal conceptual models of relationships among treatments, environmental drivers, and potential and realized soil net Nmin (Supplementary Fig. S2) to test with structural equation modelling (SEM) using a d-sep approach (Shipley, 2009; Lefcheck, 2016). The variables included in the model were long-term climatic conditions, specifically, site-level mean annual precipitation (MAP) and temperature of the wettest quarter (T.q.wet), plot-level soil texture (clay content) and soil microbial biomass. Mean annual precipitation and T.q.wet were obtained from WorldClim (Hijmans et al., 2005) (http://www.worldclim.org/) and together with the experimental treatments were predicted to directly affect soil properties and soil net Nmin (Supplementary Fig. S2). Soil clay content was, in turn, predicted to affect microbial biomass and soil net Nmin. Because we determined microbial biomass prior to incubating the samples in the laboratory or field, we assumed that the abundance of these microbes would be responsible for N process rates and not vice versa (Supplementary Fig. S2). We tested our conceptual model (Supplementary Fig. S2) using the piecewiseSEM package (version 2.0.2; Lefcheck, 2016) in R 3.4.0, in which a structured set of linear models are fitted individually. This approach allowed us to account for the nested experimental design, and overcome some of the limitations of standard structural equation models, such as small sample sizes (Shipley, 2009; Lefcheck, 2016). We used the lme function of the nlme package to model response variables, including site as a random factor. Good fit of the SEM was assumed when Fisher’s C values were non-significant (p > 0.05). For all significant interactions between covariates and experimental treatments detected in the SEMs, we calculated treatment effect sizes, i.e. the differences in potential or realized soil net Nmin between Control and treatments (Fence, NPK, NPK+Fence) and plotted these values against the climate or soil covariates. Finally, we fitted LMMs for the soil variables included in our SEMs, with treatment as the fixed factor, and with site and block as random factors, where block was nested within site.

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch Anita C., Zimmermann, Stefan, Moser, Barbara, Schütz, Martin, Hagedorn, Frank, Firn, Jennifer, Fay, Philip A., Adler, Peter B., Biederman, Lori A., Blair, John M., Borer, Elizabeth T., Broadbent, Arthur A.D., Brown, Cynthia S., Cadotte, Marc W., Caldeira, Maria C., Davies, Kendi F., di Virgilio, Augustina, Eisenhauer, Nico, Eskelinen, Anu, Knops, Johannes M.H., MacDougall, Andrew S., McCulley, Rebecca L., Melbourne, Brett A., Moore, Joslin L., Power, Sally A., Prober, Suzanne M., Seabloom, Eric W., Siebert, Julia, Silveira, Maria L. , Speziale, Karina L., Stevens, Carly J., Tognetti, Pedro M., Virtanen, Risto, Yahdjian, Laura, Ochoa-Hueso, Raul (accepted). Global impacts of fertilization and herbivore removal on soil net nitrogen mineralization are modulated by local climate and soil properties. Global Change Biology

Please cite this paper together with the citation for the datafile.

We assessed how the removal of mammalian herbivores (Fence) and fertilization with growth-limiting nutrients (N, P, K, plus nine essential macro- and micronutrients; NPK) individually, and in combination (NPK+Fence), affected potential and realized soil net Nmin across 22 natural and semi-natural grasslands on five continents. Our sites spanned a comprehensive range of climatic and edaphic conditions found across the grassland biome. We focused on grasslands, because they cover 40-50% of the ice-free land surface and provide vital ecosystem functions and services. They are particularly important for forage production and C sequestration. Worldwide, grasslands store approximately 20-30% of the Earth’s terrestrial C, most of it in the soil (Schimel, 1995; White et al., 2000).

ammonification

display_name: ammonification

climate

display_name: climate

fertilization

display_name: fertilization

global-change

display_name: global-change

grassland

display_name: grassland

herbivore

display_name: herbivore

mineralization

display_name: mineralization

nitrification

display_name: nitrification

nitrogen

display_name: nitrogen

nutrient-network

display_name: nutrient-network

soil

display_name: soil

en: Anthropogenic change and soil net N mineralization


en: actinopterygii barcoding 12s mitochondrial-dna atlantic-ocean teleo-primers environmental-dna

en: This file contains the Teleo Barcode for the Atlantic fishes collected during a French scientific survey (Evhoe) for stock assessment.

format: OCTET

en:
Mitochondrial tree based on the 12s sequences obtained for altantic fish.
This data represent the maximum likelihood phylogenetic tree allowing to assess 1) the clustering of the different sequences generated in
this study and their closest sequences recovered through a MegaBLAST on GenBank, 2) the robustness of the clades and 3) the
phylogenetic dissimilarities through the branch length of the tree among the different sequences. This tree was built with IQtree2
using the best substitution model found by modelFinder. The robustness of the node was evaluated using 1000 ultra-fast bootstrap
(node information indicated on the right of the /) and SH-aLRT procedures (node information indicated on the left of the /), using a hillclimbing nearest neighbor interchange (NNI) search to reduce the risk of overestimating branch supports with ultra-fast Bootstrap
caused by too severe model violations.

en: This file contains the metadata associated with each scientific survey

en: This file contains the 12s mitochondrial sequences for the Atlantic fishes collected on a French scientific survey (Evhoe) for stock assessment.

en: This file contains the metadata associated with each 12 s mitochondrial sequence.

en:
The global biodiversity crisis driven by anthropogenic pressures significantly threatens marine ecosystems functioning. The rate of climate change and the impacts of anthropogenic pressures outpacing the capabilities of our observation tools, stresses the need to develop new methods to assess these rapid modifications. Environmental DNA (eDNA; DNA traces released by organisms) metabarcoding has emerged as a non-invasive method that has been widely developed over the last decade. Thanks to a large spatio-temporal coverage, high detection of rare species and its time and cost effectiveness, eDNA metabarcoding represents a promising biomonitoring tool. However, capturing fish diversity using eDNA requires a high-quality genetic reference database, which we are currently still lacking. For the South European Atlantic shelf area, we estimated that only 41% of the fish species present were recorded in the available eDNA reference databases. Improving reference databases can notably rely on opportunistic sampling enabling the reporting of sequences for new species. Therefore, the data provided here consists of barcoding 95 species of ray-finned and cartilaginous fishes over the 12S mitochondrial DNA gene. We generated 168 12S barcodes from fishes that were sampled in the Bay of Biscay (Northeast Atlantic, France) between 2017 and 2019. We also provided the “Teleo” barcode associated with a specific 12S region for each individual. In addition to the sequences, we provided for each individual the taxonomy, the details associated with the barcode (Genbank accession number, chromatograms), a photograph, as well as 5 ecomorphological measures and 11 life-history traits. These traits document several functions such as dispersion, diet, habitat use, and position in the food web. Furthermore, we provided the metadata of each sampling site (date, station, sampling hour, gear, latitude, longitude, depth) and environmental variables measured in situ (conductivity, salinity, water temperature, water density, air temperature).
This data set is highly valuable to improve the Northeast Atlantic eDNA genetic database, thus helping to better understand the effects of environmental forcing in the Bay of Biscay, a transition zone housing mixed assemblages of boreal, temperate and subtropical fish species susceptible to display variability in functional traits to adapt to changing conditions.

actinopterygii

display_name: actinopterygii

atlantic-ocean

display_name: atlantic-ocean

barcoding

display_name: barcoding

environmental-dna

display_name: environmental-dna

mitochondrial-dna

display_name: mitochondrial-dna

teleo-primers

display_name: teleo-primers

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: ATLFISHREF A 12S mitochondrial reference dataset for metabarcoding Atlantic Fishes frequently caught during scientific surveys in the Bay of Biscay


en: ice snow sea-salt-aerosol antarctica arctic

en: Fig 1C

en: Data to Figure 1C

en: Fig 1B_2

en: Individual data to mean shown in Figure 1B

en: Fig 1A

en: Data Figure 1A

en: Fig 1F_2

en: Individual data to mean shown in Figure 1F

en: Fig 1F_1

en: This table lists all data files in chronological order. "SampleTemp" refers to the reading of the PT-1000 at the side of the sample holder. "cellPressure" is the water vapour pressure during the measurements. From this, in presence of ice, the temperature of the ice sample can be calculated which is given in the column "iceTemp". "dT" is the difference, or temperature offset, between sensor's reading and the ice samples temperature. The offset is due to the sensor being mounted away from the cooled spot of the sample were it experiences heating from warmer parts of the sample holder. The off-set is used to calibrate the temperature sensor and the resulting temperature during the experiments is given in the column "temperature". "relHum" is the relative humidity above (supercooled) liquid and "concBrine" is the concentration of a NaCl solution in mol/l in equilibrium with ice at the experimental temperature. "Area" is the integrated PE signal.

en: Code

en: Matlab code to read and plot the data

en: Fib 1B_3

en: Fig 1E

en: Data to Figure 1E

en: Read Me

en: Description of the data tables

en: Fig 1B_1

en: Table 2

en: This table lists all NEXAFS data files in chronological order with PE carbon to oxygen signal intensity ratios -from which the atomic ratio were calculated in the paper - before ("preCtoO") and after ("postCtoO") each NEXAFS measurement. Also listed is the change in Na ("lossSodi"), O ("lossOxy"), Cl ("lossChlor"), and C ("lossCarb") signal intensity after the NEXAFS measurement compared to prior to the NEXAFS measurement.

en: Fig 1F

en: Data to Figure 1F

en: Fig 1D

en: Data to Figure 1D

en: Laboratory experiments are presented on the phase change at the surface of sodium chloride – water mixtures at temperatures between 259 K and 240 K. High selectivity to the upper few nanometres of the frozen solution – air interface is achieved by using electron yield near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. We present the NEXAFS spectrum of the hydrohalite.

en: Data set on interfacial supercooling and the precipitation of hydrohalite in frozen NaCl solutions by X-ray absorption spectroscopy


en: soil picea-abies face forest co2 nitrogen

en: Gross N mineralisation and nitrification

en: Gross rates of N mineralisation and nitrification (15N dilution)

mimetype: text/csv

en: Collection points

en: Collection points under the trees

en: Collection of soil solution

en: Soil solution collected by suction cups

en: Resin bags

en: Ammonium, nitrate and their 15N in resin bags

en: Water analyses

en: Analyses of water, especially soil solution

en: Soil C and N

en: Analyses of C, N and their stable isotopes in the soil, and soil pH

en: Data obtained in the free-air CO2 enrichment (FACE) experiment at Hofstetten, NW Switzerland, between 2009 and 2016. This dataset contains analyses of the soil solution throughout the experiment, especially for nitrate, as well as different analyses done at the end of the experiment: ammonium and nitrate captured by ion-exchange resin bags and extracted from soil cores, gross N mineralisation and nitrification measured by isotope dilution.

face

display_name: face

forest

display_name: forest

picea-abies

display_name: picea-abies

educ

en: Education, culture and sport

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Nitrogen availability under trees exposed to CO2 enrichment (FACE)


en: emerald-ash-borer defense-chemistry intraspecific-variation ash-dieback invasive-species fraxinus cross-resistance

en: Raw data-Publication cross-resistance in ash-New Phytologist

en:
What are the research data files about: Raw data on perfomance (dry weight, development and mortality) of emerald ash borer larvae used in published bioassays. Raw data on ash dieback leasion lenghts. Raw data on untargeted and targeted specialized ash metabolites.
Which methods were used: Bioassays in greenhouses and climate chambers to collect data on emerald ash borer and ash dieback perfomance. Phytochemical analyses on ash phloem for quantifiying specialized metabolites
When and where was the data created / extracted: Summer 2020-2021

en:
 What are the research data files about: Raw data on perfomance (dry weight, development and mortality) of emerald ash borer larvae used in published bioassays. Raw data on ash dieback leasion lenghts. Raw data on untargeted and targeted specialized ash metabolites.

Which methods were used: Bioassays in greenhouses and climate chambers to collect data on emerald ash borer and ash dieback perfomance. Phytochemical analyses on ash phloem for quantifiying specialized metabolites.

When and where was the data created / extracted: Summer 2020-2021

ash-dieback

display_name: ash-dieback

cross-resistance

display_name: cross-resistance

defense-chemistry

display_name: defense-chemistry

emerald-ash-borer

display_name: emerald-ash-borer

fraxinus

display_name: fraxinus

intraspecific-variation

display_name: intraspecific-variation

invasive-species

display_name: invasive-species

en: Raw data-Publication cross-resistance in ash - New Phytologist


modeling-snow-failure-with-dem

title_for_slug: modeling-snow-failure-with-dem

en: snow-micro-mechanics snow-failure discrete-element-modelling snow-avalanche snow

en: Read-me

en: The read-me file contains a description of all the data provided in the zip file.

en: Python file

en: Python file to reproduce the figures in Bobillier et al. (2019)

mimetype: text/x-python

en: Dataset

en: The zip file contains the data underlying the figures presented in Bobillier et al. (2019). The figures can be reproduced with the python file, which is also provided.

en: This data set includes the modeling results described in the research article by Bobiller et al. (2020). All the figures in the article can be reproduced with the data provided.

discrete-element-modelling

display_name: discrete-element-modelling

snow

display_name: snow

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-micro-mechanics

display_name: snow-micro-mechanics

en: Modeling snow failure with DEM


maintainer: Matthias Haeni

en: meteo par precipitation temperature climate-change swiss-forest-lab wind-speed long-term relative-humidity meteorology

en: Site photo of the field station (BAF)

en: Site photo of the field station from below (viewing upwards the slope).

mimetype: image/jpeg

en: Data plot of the forest station (BAB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data plot of the field station (BAF)

en: Site aerial photo (Beatenberg)

en: Site aerial photo from both Beatenberg stations. Source: Google. 2016. Site aerial photo from both Beatenberg stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Forest station data (BAB)

en: Data file.

en: Site photo of the forest station (BAB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Field station data (BAF)

en:
High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Beatenberg in Switzerland where one station is located within a natural coniferous forest (BAB) with Norway spruce (_Picea abies_; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Beatenberg is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the
Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Beatenberg, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


swiss-fluxnet-site-davos

title_for_slug: swiss-fluxnet-site-davos

en: greenhouse-gas eddy-covariance swiss-fluxnet flux meteorological-measurements forest icos swiss-forest-lab

en: Fluxnet2015 dataset

en: Processed flux and meteo data are also part of the Fluxnet2015 dataset.

en: Processed data

en: Processed flux and meteo data are available from the European Fluxes Database Cluster.

en: Site description

en: Data access

en: The flux and meteo data of the Swiss FluxNet site Davos are openly available. Near real-time flux and meteo data are uploaded daily to the ICOS Carbon Portal.

en:
The Swiss FluxNet Site Davos is a managed subalpine evergreen forest, located on the Seehorn mountain near Davos in the Swiss Alps. The site is dominated by Norway spruce. The tower is owned by the Federal Office for the Environment (FOEN).
Ecosystem flux measurements of CO2, H2O (since 1997) as well as CH4 and N2O (since 2016) are performed with the eddy covariance method.
In addition to Swiss FluxNet, the site is part of the National Air Pollution Monitoring Network (NABEL), the Long term Forest Ecosystem Research (LWF), the biological drought and growth indicator network (TreeNet) and of ICOS Switzerland (Integrated Carbon Observation System). Since November 2019, the site is an ICOS Class 1 Ecosystem station.

Measurements

- Ecosystem flux measurements of CO2, H2O vapour (since 1997) as well a CH4 and N2O (since 2016) are performed with the eddy-covariance method. This method is based on measurements of trace gas mixing ratios, using infrared gas analyzers (for CO2, H2O vapor) and laser spectrometers (for CH4 and N2O), combined with wind speed and wind direction measurements, using 3D sonic anemometers. To resolve the short-term turbulent fluctuations in the atmosphere, very fast measurements are needed: we measure at 10-20 Hz, i.e., 10-20 times per second. To assess the energy budget of each ecosystem, also radiation sensors and soil climate profiles are installed at the site.
- Sub-canopy eddy fluxes (CO2, H2O, since 2023 also CH4).
- Continuous profile concentration and forest floor flux measurement of CO2, H2O, CH4, N2O.
- Auxiliary micrometeorology and soil climate measurements.

Data availability

Near real-time flux and meteo data uploaded daily to the ICOS Carbon Portal. Processed flux and meteo data are also available from the European Fluxes Database Cluster and part of Fluxnet2015 dataset.

Data policy

ICOS data license:
[https://www.icos-cp.eu/data-services/about-data-portal/data-license](https://www.icos-cp.eu/data-services/about-data-portal/data-license)

Detailed site info:
[https://www.swissfluxnet.ethz.ch/index.php/sites/ch-dav-davos/site-info-ch-dav/](https://www.swissfluxnet.ethz.ch/index.php/sites/ch-dav-davos/site-info-ch-dav/)

eddy-covariance

display_name: eddy-covariance

flux

display_name: flux

forest

display_name: forest

greenhouse-gas

display_name: greenhouse-gas

icos

display_name: icos

meteorological-measurements

display_name: meteorological-measurements

swiss-fluxnet

display_name: swiss-fluxnet

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Swiss FluxNet Site Davos


maintainer: Lisa Hülsmann

en: tree-mortality fagus-sylvatica primeval-forests forest-inventory mortality-models forest-reserves

en: Swiss data reduced

en:
READ ME for

Hülsmann L, Bugmann H, Commarmot B, Meyer P, Zimmermann S, Brang P
Data from: Does one model fit all? Patterns of beech mortality in natural forests of three European regions.
Ecological Applications http://dx.doi.org/10.5061/dryad.h4s6t

Forest inventory data of beech for the development of individual-tree mortality models from strict forests reserves in Switzerland, Germany and Ukraine.

The data package provides the files
CH_reduced: inventory data of the reduced dataset from Switzerland that was used to assess the influence of additional environmental and stand characteristics on beech mortality
CH: inventory data from strict forest reserves in Switzerland
DE: inventory data from strict forest reserves in Germany
UA: inventory data from a primeval beech forest in Ukraine

A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.
Diameter at breast height: dbh (mm)
Annual relative basal area increment: relBAI (), calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area (Bigler and Bugmann 2004)
Status of the tree: y, 0 = alive, 1 = dead
Length of the mortality period: dt (years)

Additional environmental and stand characteristics were derived for the reduced Swiss dataset.
Note the varying seasonal level of the covariates considering the entire year, the growing season from April to September (G) and the winter month January to March (W).
All climatic covariates were calculated for both the ‘growth’ (2) and the ‘mortality’ period (3). The stand covariates were derived for the second inventory of each record (2).

Mean diameter at breast height: dbh.mean.2 (mm)
Interquartile range of diameter at breast height: dbh.IQR.2 (mm)
Median diameter at breast height: dbh.median.2 (mm)
Basal area per hectare: BA.2 (m2 ha-1)
Number of trees per hectare: N.2 (ha-1)
pH-value: pH ()
Available water capacity in the soil: AWC (mm)
Mean annual precipitation sum: P.2, P.3 (mm)
Mean precipitation sum during growing season: PG.2, PG.3 (mm)
Mean annual air temperature: mT.2, mT.3 (°C)
Mean air temperature during growing season: mTG.2, mTG.3 (°C)
Mean air temperature during winter months: mTW.2, mTW.3 (°C)
Mean growing degree-days: GDD.2, GDD.3 ()
Mean number of months during growing season with water deficit: mDEFdurG.2, mDEFdurG.3 ()
Mean annual maximum water deficit: mDEFmax.2, mDEFmax.3 (mm)
Overall maximum of the annual maximum water deficit: maxDEFmax.2, maxDEFmax.3 (mm)
Mean of cumulative water deficit during growing season: mDEFcumG.2, mDEFcumG.3 (mm)
Overall maximum of cumulative water deficitduring growing season: maxDEFcumG.2, maxDEFcumG.3 (mm)
Percentage of years with at least one month water deficit: percDEF.2, percDEF.3 (%)

en: German data

en: Ukrainian data

en: Swiss data full

en:
The datasets comprise nearly 19’000 trees of European beech (_Fagus sylvatica_ L.) from unmanaged forests in Switzerland, Germany / Lower Saxony and Ukraine. Tree death was modelled as a function of size and growth, i.e., stem diameter (DBH) and relative basal area increment (relBAI). To explain the spatial and temporal variability in mortality patterns, we considered a large set of environmental and stand characteristics.

 Inventory data
The strict forest reserves in Switzerland and Germany had been established in the period of 1961-1975 and 1971-1974, respectively. Every reserve included up to 10 permanent plots ranging from 0.09 to 1.8 ha in size, with slightly irregular re-measurement intervals. Permanent plots with pure or mixed beech stands were selected from the reserves of both networks. Reserves with considerable wind disturbance during the monitored intervals were excluded from the analysis. In addition to data from the Swiss and German reserves, data from a 10 ha plot in the primeval beech forest Uholka in Western Ukraine including three remeasurements were used. The inventory data provide diameter measurements at breast height (dbh) for revisited trees with a diameter of more than 4, 7 and 6 cm for Switzerland, Germany and Ukraine, respectively.

 Mortality predictors
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory. As an explanatory variable, the annual relative basal area increment (relBAI) was calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area. Tree dbh in the second inventory was used in addition to relBAI to model tree status (alive or dead) of the third inventory.

To increase the generality of the mortality models, we selected environmental variables that are known to have a considerable influence on growth and mortality of beech. We emphasized the effects of water availability using a large set of drought characteristics that were calculated based on the local site water balance. We also related beech mortality to soil pH, temperature, precipitation and growing degree-days. Additionally, we considered stand characteristics that reflect the development stage, competition and structure of the forests.

 Further information
For further information, refer to Hülsmann _et al_. (2016) Does one model fit all? patterns of beech mortality in natural forests of three European regions. _Ecological Applications_.

fagus-sylvatica

display_name: fagus-sylvatica

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves

mortality-models

display_name: mortality-models

primeval-forests

display_name: primeval-forests

tree-mortality

display_name: tree-mortality

en: Data from: Does one model fit all? patterns of beech mortality in natural forests of three European regions


maintainer: Benjamin Reuter

en: crocus avalanche-danger avalanche avalanche-problem-type snow snow-instability avalanche-activity weissfluhjoch snow-cover-modeling snowpack

en: 2015-2016 Avalanche problem types from Crocus

en:
Avalanche problem types were derived from a snow cover simulation with the model Crocus for the winter season 2015-2016 at the Weissfluhjoch study plot, Davos, CH.
The data cover the period 01.01.2016-30.04.2016. The binary indicator (0,1) tells whether an avalanche problem type was identified in the snow cover simulation (1) or not (0).
The data are presented in Figure 7 in Reuter et al. (2021).

en: 2015-2016 Seismic avalanche acitivity catalogue

en:
Avalanches were indentified in seismic data recorded by two seismic arrays, one deployed at Wannengrat (2,500 m) and another one deployed in the Dischma valley (2,000 m).
The data cover the period from 01.01.2016 - 30.04.2016 and are presented in Figure 7 in Reuter et al. (2021).

en: 1999-2017 Avalanche problem types from Crocus

en:
Avalanche problem types were derived from snow cover simulations with the model Crocus at the Weissfluhjoch study plot, Davos, CH.
The data cover the winter seasons between 1999-2017 and include the simulated annual frequencies of new snow, wind slab, persistent weak layer, aging-persistent weak layer and wet snow problem types.
The data are presented in Figure 8 in Reuter et al. (2021).

en: 1999-2017 Avalanche problem types from SNOWPACK

en:
Avalanche problem types were derived from snow cover simulations with the model SNOWPACK at the Weissfluhjoch study plot, Davos, CH.
The data cover the winter seasons between 1999-2017 and include the simulated annual frequencies of new snow, wind slab, persistent weak layer, aging-persistent weak layer and wet snow problem types.
The data are shown in Figure 8 in Reuter et al. (2021).

en: 2015-2016 Avalanche problem types from SNOWPACK

en:
Avalanche problem types were derived from a snow cover simulation with the model SNOWAPCK for the winter season 2015-2016 at the Weissfluhjoch study plot, Davos, CH.
The data cover the period 01.01.2016-30.04.2016. The binary indicator (0,1) tells whether an avalanche problem type was identified in the snow cover simulation (1) or not (0).
The data are presented in Figure 7 in Reuter et al. (2021).

en:
Avalanche problem types were derived from snow cover simulations with the models Crocus and SNOWPACK at the Weissfluhjoch study plot, Davos, CH. The data include annual frequencies of avalanche problem types for the seasons 1999-2017 and daily presence of avalanche problem types for the period 01.01.2016 - 30.04.2016.
Avalanche activity was derived from two seismic sensor arrays deployed no further than 15 km from Weissfluhjoch, Davos, CH. The data cover the period 01.01.2016 - 30.04.2016.

avalanche

display_name: avalanche

avalanche-activity

display_name: avalanche-activity

avalanche-danger

display_name: avalanche-danger

avalanche-problem-type

display_name: avalanche-problem-type

crocus

display_name: crocus

snow

display_name: snow

snow-cover-modeling

display_name: snow-cover-modeling

snow-instability

display_name: snow-instability

snowpack

display_name: snowpack

weissfluhjoch

display_name: weissfluhjoch

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Simulated avalanche problem types and seismic avalanche activity around Weissfluhjoch


c-n-p-release-treeline

title_for_slug: c-n-p-release-treeline

en: nutrient-fluxes treeline-ecosystems carbon-cycle climate-change biogeochemical-cycling enzymatic-activities microbial-biomass litter-decomposition

en: Litter layer characteristics, C-N-P-release during decomposition, microbial C-N-P, enzyme activity, mineralization of 13C-labeled glucose-6-phosphate from samples collected across two treelines

en:
1. Chemical characteristics of litter layer sampled along elevation gradient across treeline ecotones in the Khibiny mountains (birch) and South Urals (spruce)
2. Release of C-N-P during decomposition at 5°C and 15° studied in an incubation experiment with microlysimeters
3. Data on microbial biomass C-N-P, potential activity of C-N-P requiring enzymes in the litter layer
4. Mineralization of 13C labeled glucose-6 phosphate, microbial 13C uptake, and net P immobilization of released P to identify microbial processing of labile organic P

biogeochemical-cycling

display_name: biogeochemical-cycling

carbon-cycle

display_name: carbon-cycle

climate-change

display_name: climate-change

enzymatic-activities

display_name: enzymatic-activities

litter-decomposition

display_name: litter-decomposition

microbial-biomass

display_name: microbial-biomass

nutrient-fluxes

display_name: nutrient-fluxes

treeline-ecosystems

display_name: treeline-ecosystems

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: C-N-P-Release Treeline


snow-drift-station-micro-rain-radar

title_for_slug: snow-drift-station-micro-rain-radar

en: mountain rain snow precipitation radar raclets

en: MMR Data Period 1

en: The dataset contains measurements between March 1 and March 5, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: MRR data of period 3

en: The dataset contains measurements between March 8 and March 13, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: MRR data Period 2

en: The dataset contains measurements between March 5 and March 8, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: Parameter MRR

en: The PDF contains additional information on parameters which were set for the certain time periods (time in UTC).

en: MRR data of period 4

en: The dataset contains measurements between March 13 and March 22, 2019, with time in UTC. The parameters and specifications are given in MRR_parameters.pdf. The zip folder contains hourly data files in netCDF format and a log file, reporting the instrument status.

en: The instrument (MRR, Metek) was mounted at Gotschnagrat (LON: 46.859 LAT: 9.849) at a height of 1 m above snow surface (at the beginning of the campaign) with an orientation of 22° with respect to North and a horizontal viewing direction. The sampling time was either 5 s or 10 s, depending on the settings at the specific period. The MRR produces standard outputs like radar reflectivity, doppler velocity, etc., and additional information can be found [here](https://metek.de/de/product/mrr-2/).

mountain

display_name: mountain

precipitation

display_name: precipitation

raclets

display_name: raclets

radar

display_name: radar

rain

display_name: rain

en: Snow Drift Station - Micro Rain Radar


soil-respiration-exclosure-experiment

title_for_slug: soil-respiration-exclosure-experiment

en: soil-respiration ungulates subalpine grassland grazing

en: Soil respiration Switzerland

en:
ID: Fence number

Year	:Year of sampling

mean.CO2: soil respiration measured with PP-systems SRC-1 soil respriation chamber attached to a EGM-4 infrared gas analyser; units CO2 g m-2 h-1

Grassland: Grasslands where fences were errected. Note that on large grasslands (STAB, GRIM, MING) 2 pairs of fences were errected (2 in short, 2 in tall-grass vegetation), on small grasslands (DADA, MARG, BOTS) only one pair of fences was errected (1 short-grass; one-tallgrass vegetation)

Fence: Fence number; un-even numbers on short-grass vegetation (1,3,5,7,9,11,13,15,17), even numbers on tall-grass vegetation (2,4,6,8,10,12,14,16,18)

Vegetation:	1 = shortgrass vegetation, 2 = tall-grass vegetation (9 replicate fences on each vegetation type)

Treatment	: 1 = all herbivores grazing, 2 = large ungulates (red deer, chamois) excluded

en:
Location of data collection
The Swiss National Park (SNP) is located in the southeastern part of Switzerland, and covers an area of 170 km2, 50 km2 of which is forested, 33 km2 is occupied by alpine and 3 km2 by subalpine grasslands. Elevations range from 1350 to 3170 m a.s.l., and mean annual precipitation and temperature are 871 mm and 0.6°C measured at the Park’s weather station in Buffalora (1980 m a.s.l.) between 1960 and 2009 (MeteoSchweiz 2011). Founded in 1914, the SNP received minimal human disturbance for almost 100 years (no hunting, fishing, or camping, visitors are not allowed to leave the trails). Large (> 1 ha) homogeneous patches of short- and tall-grass vegetation characterize the subalpine grasslands. The average vegetation height of short-grass vegetation is 2 to 5 cm. Red fescue (Festuca rubra L.), quaking grass (Briza media L.) and common bent grass (Agrostis tenuis Sipthrob) are the predominating plant species in this vegetation type. Tussocks of evergreen sedge (Carex sempervirens Vill.) and mat grass (Nardus stricta L.) are predominant in the tall-grass vegetation, which averages 20 cm in vegetation height (Schütz and others 2006). Short-grass vegetation developed in areas where cattle and sheep rested (high nutrient input) during agricultural land-use (from 14th century until 1914); tall-grass vegetation developed in areas where cattle and sheep used to graze, but did not rest (Schütz and others 2003, 2006). Herbivores were shown to consume > 60% of the biomass in short-grass compared to < 20% in tall-grass vegetation (Schütz and others 2006). The herbivore community present in the SNP can be divided into four groups based on body size/weight: large [red deer (Cervus elaphus L.) and chamois (Rupricapra rupricapra L.); 30 - 150 kg], medium [marmot (Marmota marmota L.) and snow hare (Lepus timidus L.); 3 – 6 kg], and small vertebrate herbivores (small rodents: e.g. Clethrionomys spp., Microtus spp., Apodemus spp.; 30 – 100 g) as well as invertebrates (e.g. grasshoppers, caterpillars, cicadas, < 5 g).

Experimental design
We selected 18 subalpine grassland sites (9 short-grass, 9 tall-grass vegetation). The sites were spread across the entire park on dolomite parent material at altitudes of 1975 to 2300 meters. At each site we established an exclosure network (fences) in spring 2009 (early June), immediately after snowmelt. Each exclosure network consisted of a total of five 2 × 3 m sized plots that progressively excluded the different herbivores listed above (further labeled according to the herbivore guilds that had access to the respective plots “All”, “Marmot/Mice/Invertebrates”, “Mice/Invertebrates”, “Invertebrates”, “None”). The “All” treatment was thus accessible to all herbivores, was not fenced and was located at least 5 m away from a 2.1 m tall and 7 × 9 m main fence that enclosed the other four treatments. This fence was constructed of 10 × 10 cm wooden posts and electrical equestrian tape (AGRARO ECO, Landi, Bern, Switzerland; 20 mm width) mounted at 0.7 m, 0.95 m, 1.2 m, 1.5 m and 2.1 m above the ground that were connected to a solar charged battery (AGRARO Sunpower S250, Landi, Bern, Switzerland). We also mounted non-electrically charged equestrian tape at 0.5 m to help exclude deer and chamois, yet allow marmots and hares to enter safely. Within each main fenced area we randomly established four 2 × 3 m plots: (1) The “Marmot/Mice/Invertebrates” plot remained unfenced, thus, with the exception of red deer and chamois, all herbivores were able to access the plot, (2) The “Mice/Invertebrates” plot consisted of a 90 cm high electric sheep fence (AGRARO Weidezaunnetz ECO, Landi, Bern, Switzerland; mesh size 10 × 10 cm) connected to the solar panel and excluded all medium sized mammals (marmots, hares), but provided access for small mammals and invertebrates, (3) The “Invertebrates” plot provided access for invertebrates only and was surrounded by 1 m high metal mesh (Hortima AG, Hausen, Schweiz; mesh size 2 × 2 cm), (4) The “None” plot was surrounded by a 1 m tall mosquito net (Sala Ferramenta AG, Biasca, Switzerland; mesh size 1.5 × 2 mm) to exclude all herbivores. This plot was covered with a roof constructed of a wooden frame lined with mosquito mesh that was mounted on the wooden corner posts. We also treated this plot with a biocompatible insecticide (Clean kill original, Eco Belle GmbH, Waldshut-Tiengen, Germany) when needed to remove insects that might have entered during data collection or that hatched from the soil.

!!! The here published data set only contains data for “All”, and “Marmot/Mice/Invertebrates” (= ungulates excluded) plots !!!

Data collection
In-situ soil CO2 emissions were measured with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA) on two randomly selected locations on one subplot within each of the 90 plots. For each measurement the soil chamber (15 cm high; 10 cm diameter) was placed on a permanently installed PVC collar (10 cm diameter) driven five centimeters into the soil at the beginning of the study (June 2009). The measurements were conducted between 0900 and 1700 hours every two weeks from early to early September 2009, 2010, 2011 and 2013. Freshly germinated plants growing within the PVC collars were removed prior to each measurement to avoid measuring plant respiration/photosynthesis. The two measurements collected per plot every two weeks were averaged.

Please acknowledge the funding of the study: funded by the Swiss National Science Foundation, SNF grant-no 31003A_122009/1 to Anita C. Risch, Martin Schütz and Flurin Filli

grassland

display_name: grassland

grazing

display_name: grazing

soil-respiration

display_name: soil-respiration

subalpine

display_name: subalpine

ungulates

display_name: ungulates

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Soil respiration - exclosure experiment


en: relative-humidity meteo long-term precipitation wind-speed swiss-forest-lab par meteorology temperature climate-change

en: Site photo of the field station (CIF)

en: Site photo of the field station from the side.

en: Data plot of the field station (CIF)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Data file.

en: Site aerial photo (Chironico)

en: Site aerial photo from both Chironico stations. Source: Google. 2016. Site aerial photo from both Chironico stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (CIB)

en: Forest station data (CIB)

en: Site photo of the forest station (CIB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Chironico in Switzerland where one station is located within a natural coniferous forest stand (CIB) with Norway spruce (_Picea abies_; 160-180 yrs) and European silver fir (_Abies alba_; 140-160 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, CIF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Chironico is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Chironico, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 2000 onwards


en: long-term meteorology meteo relative-humidity precipitation par climate-change temperature swiss-forest-lab wind-speed

en: Site aerial photo (Bettlachstock)

en: Site aerial photo from both Bettlachstock stations. Source: Google. 2016. Site aerial photo from both Bettlachstock stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Site photo of the field station (BTF)

en: Field station data (BTF)

en: Data plot of the forest station (BTB)

en: Site photo of the forest station (BTB)

en: Site photo of the forest station from the side.

en: Data plot of the field station (BTF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Bettlachstock in Switzerland where one station is located within a natural mixed forest stand (BTB) with European beech (_Fagus sylvatica_; 170-190 yrs), European silver fir (_Abies alba_; 190 yrs) and Norway spruce (_Picea abies_; 200 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BTF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Bettlachstock is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

precipitation

display_name: precipitation

educ

en: Education, culture and sport

en: EnviDat: the Environmental Data Portal

en: Bettlachstock, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


biogas-aus-hofdunger-in-der-schweiz

title_for_slug: biogas-aus-hofdunger-in-der-schweiz

en: review switzerland bioenergy manure biogas

en: Biogas aus Hofdünger in der Schweiz

en: Ziel dieses Whitepapers ist es, Entscheidungsträgern, Verwaltungen und Stakeholdern die aktuellsten Forschungsergebnisse zur Verfügung zu stellen, um die optimale Nutzung von Bioenergie aus Hofdünger in der Schweizer Energiewende zu fördern. Zu diesem Zweck werden die Ergebnisse des Schweizer Kompetenzzentrums für Bioenergieforschung - SCCER BIOSWEET - zusammengefasst und in einem breiteren Kontext dargestellt. Wenn nichts anderes erwähnt wird, beziehen sich die Ergebnisse auf die Schweiz und im Falle der Ressourcen auf die heimischen Biomassepotenziale.

bioenergy

display_name: bioenergy

biogas

display_name: biogas

manure

display_name: manure

review

display_name: review

switzerland

display_name: switzerland


en: microct intercomparison icecube specific-surface-area snow

en: artificial_snow_data set

en: The file contains all micro-CT and IC measurements of the artificial snow data set. The data set was originally produced to investigate the influence of black carbon on SSA measurements.

en: SMP measurement files for snow types A, B, C and D.

en: Influence of black carbon on the measurement of the specific surface of snow with the near infrared method - Philipp Baumann

en: These experiments investigate different possible errors by measuring the specific surface area (SSA) of snow with the near infrared method. The influence of black carbon on this measurement was disproved, the theory was therefore validated. It shows that sunlight has no influence on the measurement with the IceCube. Wind drift snow as thin layer on the sample can increase the measured value of the specific surface by a few percent. This could be part of the error, observed in former measurements at SLF. As reference for the measured SSA values with the near infrared method, computer tomography was used to verify the SSA values.

en: Statistics of samples

en: Grain survey of snow particles

en: The file contains all measurements of the artificial particles for snow types A, B, C, D and E, including the artificial particle mass in the Petri dish.

en: The file contains all data for the plot in figure 1 of the co-located density and SSA measurement at Summit, Greenland in May 2015, conducted by Schneebeli, Proksch, Schmid.

en: TARTES simulations

en: Jupyter notebook with TARTES simulations.

en: IceCube and MicroCT data

en: The file contains all micro-CT and IC measurements for snow types A, B, C, D and E used in our study. All samples were processed (and stored) in a cold laboratory at -15°C.

en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

snow

display_name: snow

specific-surface-area

display_name: specific-surface-area

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: large-eddy-simulations meteorological-data eddy-covariance-measurements drifting-snow micro-rain-radar antarctica turbulence mass-flux blowing-snow

en: Readme

en: Meta data

en: Source code of the large-eddy simulations coupled with a Lagrangian stochastic model (LES-LSM), available on GitLab.

en: Measurement data from snow particle counter at MRR site

en: Near-surface observations of drifting snow from a Snow Particle Counter (SPC) installed at the location of the Micro Rain Radar.

en: Simulation data for a situation with significant snow transport

en: Data from two LES-LSM simulations called Drift_1 and Drift_2, which reproduce the conditions observed at the S17 site on 11th January 2019, 00:40 to 00:50 UTC.

en: Measurement data from Micro Rain Radar (MRR)

en: Remote sensing data of blowing snow from a Micro Rain Radar (MRR).

en: Simulation data for a situation with negligible snow transport

en: Results from two LES-LSM simulations called NoDrift_1 and NoDrift_2, which reproduce the conditions observed at the S17 site on 12th January 2019, 05:40 to 05:50 UTC.

en: Measurement data from micro-meteorological station

en: Automatic in-situ measurements of micro-meteorology and snow transport

en:
This dataset contains measurement and simulation data. The measurements characterize the standard meteorology, turbulence, and snow transport at the S17 site near Syowa Station in East Antarctica during an expedition in austral summer 2018/2019. Large-eddy simulations with sublimating particles provide additional insight into the latent and sensible heat exchange between snow and air in two example situations observed at the S17 site.

A part of the measurement data was recorded by an automatic measurement station from 10th January 2019 to 26th January 2019. This measurement station was equipped with standard meteorological sensors, a three-dimensional ultrasonic anemometer, an open-path infrared gas analyzer, a snow particle counter, an infrared radiometer for measurements of the surface temperature, and a sonic ranging sensor measuring changes in snow surface elevation.

At a horizontal distance of approximately 500 m, a Micro Rain Radar (MRR) was installed in a tilted configuration with an elevation angle of 7° for remote sensing of blowing snow between 25th December 2018 and 24th January 2019. In addition, near-surface in-situ measurements of snow transport were performed at the location of the MRR by deploying a snow particle counter from 27th December 2018 to 24th January 2019.

The simulations cover a 18 x 18 x 6 m³ domain and reproduce the steady-state conditions during a 10-min interval with significant snow transport and another 10-min interval with negligible snow transport. We provide the model source code and the post-processed simulation data, i.e., horizontally averaged quantities as a function of height and time.

antarctica

display_name: antarctica

blowing-snow

display_name: blowing-snow

drifting-snow

display_name: drifting-snow

eddy-covariance-measurements

display_name: eddy-covariance-measurements

large-eddy-simulations

display_name: large-eddy-simulations

mass-flux

display_name: mass-flux

meteorological-data

display_name: meteorological-data

micro-rain-radar

display_name: micro-rain-radar

turbulence

display_name: turbulence

educ

en: Education, culture and sport

en: EnviDat: the Environmental Data Portal

en: Meteorology and snow transport at S17 near Syowa, Antarctica, in austral summer 2018/2019


en: visualization policy-action landscape-change climate-change scenario

en: Entremont subtitles DE

en:
Scenarios of landscape change under climate change in the Swiss mountains.
Trailer in German with written subtitles.

en: Seeland subtitles FR

en:
Scenarios of landscape change under climate change in the Swiss lowlands.
Trailer in French with subtitles.

en: Entremon subtitles FR

en: Scenarios of landscape change under climate change in the Swiss mountains. Trailer in French with subtitles.

en: Seeland subtitles DE

en:
Scenarios of landscape change under climate change in the Swiss lowlands.
Trailer in German with subtitles.

en:
Short videos showing scenarios of potential landscape development in a 4°C warmer climate for a Swiss mountain region and a region on the Swiss Plateau. The videos are in German or French with subtitles.
The videos' key message is: Climate change will have an impact on the Swiss landscapes. However, according to the strategy chosen to adapt to climate change, society and politics will also have a strong influence on the future landscapes and the services they will provide. If no action is taken to adapt to climate change today, then society will have to react in a hurry at a later point in time. This can often result in resource-intensive technical solutions. Conversely, if society takes action in an anticipatory way already today, nature-based solutions can be implemented more successfully and humans can benefit more from the landscape services..
These short videos are teasers that should make the viewers curious to visit the panorama pictures (https://viergrad.envidat.ch/).

climate-change

display_name: climate-change

landscape-change

display_name: landscape-change

policy-action

display_name: policy-action

scenario

display_name: scenario

visualization

display_name: visualization

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Teaser videos Swiss landscapes under climate change


en: biodiversity microclimate climate-change statistical-interpolation ecology forest radiation-transfer

en: Predicted microclimate topsoil temperatures at 5 cm below ground. 10 m spatial resolution raster files are provided for mean daily minimum (tmin), mean (tmean) and maximum (tmax) temperatures during each month from April (04) to October (10) over the period between 2012 to 2021.

en: Predicted microclimate air temperatures at 5 cm above ground. 10 m spatial resolution raster files are provided for mean daily minimum (tmin), mean (tmean) and maximum (tmax) temperatures during each month from April (04) to October (10) over the period between 2012 to 2021.

en: Predicted microclimate air temperatures at 100 cm above ground. 10 m spatial resolution raster files are provided for mean daily minimum (tmin), mean (tmean) and maximum (tmax) temperatures during each month from April (04) to October (10) over the period between 2012 to 2021.

en: Climate data matching the scales at which organisms experience climatic conditions are often missing. Yet, such data on microclimatic conditions are required to better understand climate-change impacts on biodiversity and ecosystem functioning. Here we combine a national network of microclimate temperature measurements with a novel radiative transfer model to map monthly minimum, mean and maximum temperatures during the vegetation period at a 10 meter spatial resolution across Switzerland. The temperature measurements took place in 107 sampling plots distributed across different habitat types, with 62 plots in forests, 22 below trees outside forests, and 23 in open grasslands. In each plot we measured temperature in the topsoil (-5cm), as well as in the air at 5cm and 100cm height above ground. Spatial interpolation was achieved by using a hybrid approach based on linear mixed effects models with input from detailed radiation estimates that account for topographic and vegetation shading, as well as other predictor variables related to the macroclimate, topography and vegetation height. Our data reveals strong horizontal and vertical variability in microclimate temperature, particularly for maximum temperatures at 5 cm above the ground and within the topsoil. Compared to macroclimate conditions as measured by weather stations outside forests, diurnal air and topsoil temperature ranges inside forests were reduced by up to 3.0 and 7.8 °C, respectively, while below trees outside forests, e.g. in hedges and below solitary trees, this buffering effect was 1.8 and 7.2 °C. We also found that in open grasslands, maximum temperatures at 5 cm above ground are on average 3.4 °C warmer than that of macroclimate, suggesting that in such habitats heat exposure close to the ground is often underestimated when using macroclimatic data. After accounting for macroclimate effects, microclimate patterns were primarily driven by radiation, with particularly strong effects on maximum temperatures. Results from spatial block cross-validation revealed predictive accuracies as measured by RSME’s ranging from 1.18 to 3.43 °C, with minimum temperatures generally being predicted more accurately than maximum temperatures. The microclimate maps presented here enable a more biologically relevant perspective when analysing climate-species interactions, which is expected to lead to a better understanding of biotic and ecosystem responses to climate and land use change.

biodiversity

display_name: biodiversity

ecology

display_name: ecology

forest

display_name: forest

microclimate

display_name: microclimate

radiation-transfer

display_name: radiation-transfer

statistical-interpolation

display_name: statistical-interpolation

en: Monthly topsoil and near surface microclimate temperature data for Switzerland


en: wasps urban-ecology urbanization cavity-nesting urban-ecosystems host-enemy-interactions trap-nest zurich management-intensity bees hymenoptera food-webs

en: Read me file

en: Questionnaires management intensity anonymised

en: Results from the management intensity questionnaires anonymised. IDs are randomized and don't match those in the study data csv

en: Raw data nests

en: Host-enemy interaction data, used to compute the interaction diversity metrics

en: Data of the study

en: The csv. file contains the response variable "interaction diversity" (idiv), and the values of the predictors used in the paper. The "id" column indicates the garden ID, each row in the dataset correspond to a garden and each column to the response (idiv), an explanatory variable or a descriptor (name, Lat, Long). See the thesaurus and the readme file for extended information on the variables.

en: Not used: raw questionnaires

en: Not used: readme

en: Script for the analyses v1.0

en: Cleaned script to reproduce the analyses

en: Not used: data of the study

en: Thesaurus

en: Variable names and their description.

en: Script for the analyses v2.0

en:
The data supports the paper "Local and landscape factors shape alpha and beta trophic interaction diversity in urban gardens". It provides:
(1) the host-natural enemy interaction networks and network metrics between cavity-nesting bees and wasps and their natural enemies,
 (2) the explanatory variables reflecting urban intensity, temperature, habitat amount and management intensity.
(3) the questionnaires for assessing management intensity.
(4) a thesaurus for the variable names.
(5) a readme file.
(6) the R script used for the analyses.
The data is part of the BetterGardens project. It was sampled in 85 allotment and home gardens in the ctiy of Zurich in 2015 using standardized trapnests.

bees

display_name: bees

cavity-nesting

display_name: cavity-nesting

food-webs

display_name: food-webs

host-enemy-interactions

display_name: host-enemy-interactions

hymenoptera

display_name: hymenoptera

management-intensity

display_name: management-intensity

trap-nest

display_name: trap-nest

urban-ecology

display_name: urban-ecology

urban-ecosystems

display_name: urban-ecosystems

urbanization

display_name: urbanization

wasps

display_name: wasps

zurich

display_name: zurich

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Data on interaction diversity in urban gardens


en: snow-atmosphere-interactions laboratory-study atmosphere ice chemistry

en:
The table lists all NEXAFS raw data with the following columns:

* name:						raw file name
* xRayEkinRange_eV: 		Smallest and largest X-ray photon energy in eV
* scientaPassEnergy_eV: 	Pass energy of electron analyzer in eV
* scientaDwellTime_ms: 		Dwell time of electron analyzer in ms
* regionName:				O K-edge for all data
* scientaAcquisitionMode: 	Fixed energy (snapshot) mode
* scientaEkinRange_eV: 		Smallest and largest energy of the kinetic energy window used for detection in this work
* scientaEkinStep_eV		Not defined in fixed energy mode
* scientaLensMode:			Tune table
* scientaRegionIterations: 	Iterations (sweeps)
* scientaSequenceIterations: Iterations (sweeps)
* sampleTemp_dC: 			Temperature as monitored at the sample holder in °C
* cellPressure_mbar: 		Total pressure in measurement cell in mbar
* iceTemp_dC: 				Temperature of ice sample calculated based on vapour pressure (assuming total pressure equals partial pressure of water) in °C
* smplX_mm: 				positon of measurement spot, x dimension in mm
* smplY_mm: 				positon of measurement spot, y dimension in mm
* smplZ_mm: 				positon of measurement spot, z dimension in mm
* sealingTemp:				temperature at base of sample manipulator
* lastModifiedDatestr: 		time and date when data aquisition was finished
* sample: 					sample description

en: Near Ambient Pressure partial Auger-Meitner electron yield X-ray absorption spectra and photon flux data. X-ray energy in eV in column 1, analyzer electron count intensity in arb. units in column 2.

en: Processed data as shown in Figure 4 of publication. X-ray energy in eV in column one, electron count intensity in arb. units in column 2.

en: Data are compiled that have been used to demonstrate the impact of high water partial pressure on X-ray absorption spectra of ice.

atmosphere

display_name: atmosphere

chemistry

display_name: chemistry

ice

display_name: ice

laboratory-study

display_name: laboratory-study

snow-atmosphere-interactions

display_name: snow-atmosphere-interactions

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: An ice oxygen K-edge NEXAFS spectroscopy data set on gas-phase processing


en: landuse cryowrf topography wrf antarctica

en: WPSinput

en: Input files to run the Weather Research and Forecasting model (WRF) preprocessing system WPS with REMA topography and AntarcticaLC2000 landuse data (see Documentation for details).

en: Documentation

en: Documentation about how the provided dataset was produced including details to reproduce the dataset.

en: Scripts

en: Scripts to run the preprocessing to produce WRF binary tiles from REMA and AntarcticaLC2000 for topography and landuse (see Documentation for procedure).

en:
Reference Elevation Model of Antarctica (REMA) topography and AntarcticaLC2000 landuse data
are now available as static data input for the Weather Research and Forecasting model (WRF). Topography
and landuse are made available at a spatial resolution of 1 km. This documentation describes the methods
applied to convert REMA and AntarcticaLC2000 to WRF readable format and shows how this improves
the representation of the Antarctic topography and landuse categories over coastal Antarctic regions.

antarctica

display_name: antarctica

cryowrf

display_name: cryowrf

landuse

display_name: landuse

topography

display_name: topography

wrf

display_name: wrf

en: REMA topography and AntarcticaLC2000 for WRF


maintainer: Avalanche Warning Service SLF

en: Avalanche fatalities per year in Switzerland since 1936/1937

en:
Attention: this data is not updated after 2022 anymore.
This dataset contains the statistics on the number of avalanche fatalities per hydrological year in Switzerland. The data set commences with the beginning of the hydrological year 1936/37 on 01/10/1936. After the completion of a hydrological year, the new data is appended to the existing dataset.
The following information is contained (by column and column title):
 - hydrological year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)
The definition for these four categories as described in the guidelines to the avalanche accident database:
**tour**:
activities include back-country ski, snowboard or snow-shoe touring
**offpiste**:
access from ski area, generally from the top of a skilift with short hiking distances
**transportation.corridors** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people travelling or recreating on open or temporarily closed
transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)
**buildings** ([Techel et al., 2016](http://www.geogr-helv.net/71/147/2016/ )):
people inside or just outside buildings, and workers on high alpine building
sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Number of avalanche fatalities per hydrological year in Switzerland since 1936-1937


snow-drift-station-snow-and-air-data

maintainer: Benjamin Walter

title_for_slug: snow-drift-station-snow-and-air-data

en: snow temperature raclets snow-depth snow-height snow-temperature

en: Relative Humidity

en: The relative humidity (%) was measured with a Campbell CS-215 at a height of 2.2 m above ground. The time is given in UTC+1.

en: Snow Depth

en: The snow depth (cm) was measured with a Lufft SHM-31 which was mounted at 1.7 m above ground. The time is given in UTC+1.

en: Snow Surface Temperature

en: The snow surface temperature (°C) was measured with a Campbell SI-111 at 0.7 m above ground. The time is given in UTC+1.

en: Air Temperature

en: The air temperature (°C) was measured with a Campbell CS-215 which was mounted at a height of 2.2 m above ground. The time is given in UTC+1.

en: Snow and air data was monitored at Gotschnagrat (LON: 46.859 LAT: 9.849) by an infrarot radiometer (Campbell SI-111) for snow temperature (°C), a snow height sensor (Lufft SHM-31) for snow height change (cm) and a temperature and humidity sensor (Campbell CS-215) for air temperature (°C) and relative humidity (%). No filter was applied to the sensors and the smapling frequency was 1 Hz.

raclets

display_name: raclets

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-height

display_name: snow-height

snow-temperature

display_name: snow-temperature

temperature

display_name: temperature

en: Snow Drift Station - Snow and Air Data


soil-property-maps-for-the-swiss-forest

title_for_slug: soil-property-maps-for-the-swiss-forest

en: soil-properties switzerland dsm soc soil-ph forest soil-depth soil soil-texture

en:
We used 2071 forest soil profiles to model a wide range of soil properties for the forested area of Switzerland. The spatial prediction is based on the principle of «digital soil mapping». This involves linking soil profiles with soil forming factors using statistical or machine learning methods.

A quantile regression forest (QRF) approach was applied to predict the following soil properties at six depth ranges: clay, gravel, sand, fine earth density, SOC. The depth ranges correspond to the standard depths of the [GlobalSoilMap.Net](https://www.isric.org/) specification: 0–5, 5–15, 15–30, 30–60, 60–100 and 100–200 cm. In addition, the total soil depth down to a non-root-permeable layer or solid rock soil thick was predicted. To quantify the uncertainty for each predicted pixel, the upper and lower limit of the 90% prediction interval derived from QRF was calculated. More details on the methods and results are described in Baltensweiler et al. 2021 and Baltensweiler et al 2022.

The soil property maps, and the uncertainty maps are provided as a GeoTIFF files at 25 m resolution. The excel file (xlsx) provides a short description of the raster layers.

**The soil and the uncertainty maps can be viewed in a simple web-GIS application available at:**
[www.wsl.ch/soilmaps](https://www.wsl.ch/soilmaps).

dsm

display_name: dsm

forest

display_name: forest

soc

display_name: soc

soil

display_name: soil

soil-depth

display_name: soil-depth

soil-ph

display_name: soil-ph

soil-properties

display_name: soil-properties

soil-texture

display_name: soil-texture

switzerland

display_name: switzerland

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Soil property maps for the Swiss forest