maintainer: Achille Capelli

en: liquid-water-content gnss snow swe gps lwc snow-water-equivalent

en: Snow profiles data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: GNSS derived SWE, LWC and HS from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-20

en: Snow and meteo data from automatic sensors for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Daily data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Daily observer data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Webcam images

en: Webcam images showing some typical differences in the snow conditions at the four sites (Küblis, Klosters, Laret and Weissfluhjoch) for two time periods (14-18.3.2019 and 27.1-11.2.2020). Both time periods included a precipitation event with partial rain-on–snow occurring at the lower locations.

en: Manual profiles

en: Data of the traditional manual profiles for the locations Weissfluhjoch, Klosters and Küblis. For the location of Küblis there are no traditional manual profile data. We provided the data as both PDF and .CAAML format (See https://niviz.org/ or http://caaml.org/Schemas/V5.0/Profiles/SnowProfileIACS/CAAMLv5_SnowProfileIACS.pdf). Moreover, we added LWC and density profiles when available (all locations).

en: Daily data for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Profile data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: GNSS derived SWE, HS, and LWC for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: Snow and meteo data from automatic sensors for the site Weissfluhjoch at 2540 m a.s.l (46°49’47’’ N, 9°48’34’’E) for the two winters 2018-2020.

en: GNSS derived SWE, LWC and HS from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-20

en: Daily data from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Daily data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winters 2018-2020. These data were processed to daily values from the other data files.

en: Daily observer data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: Snow profiles data from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: GNSS derived data for Laret at 1510 m a.s.l. (46°50’2’’N, 9°52’17’’E) for the two winter 2018-2020.

en: Snow profiles data from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: Snow and meteo data from automatic sensors from Küblis at 820 m a.s.l. (46°54’48’’N, 9°46’54’’E) for the two winters 2018-2020.

en: Daily observer data from automatic sensors from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: Snow and meteo data from automatic sensors from Klosters (1210 m a.s.l. ,46°51’49’’N, 9°53’17’’E) for the two winters 2018-2020.

en: This database contains GNSS derived snow water equivalent (SWE), liquid water content (LWC), and snow height (HS) and reference data collected during the two winter 2018-2020 at 4 sites Weissfluhjoch (2540 m asl, 46°49’47’’ N, 9°48’34’’E), Laret (1515 m asl, . 46°50’2’’N, 9°52’17’’E), Klosters (1200 m asl, 46°51’49’’N, 9°53’17’’E), and Küblis (815 m asl, 46°54’48’’N, 9°46’54’’E).

gnss

display_name: gnss

gps

display_name: gps

liquid-water-content

display_name: liquid-water-content

lwc

display_name: lwc

snow

display_name: snow

snow-water-equivalent

display_name: snow-water-equivalent

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow water equivalent measurements with low-cost GNSS receivers along a steep elevation gradient in the East-ern Swiss Alps


maintainer: James W. Kirchner

en: streamflow snowmelt evapotranspiration ecohydrology diel-cycle sap-flow groundwater diurnal-cycle

state: active

type: dataset

en: 30-minute time series

media_type: text/plain

en: 30-minute hydrometeorological and ecohydrological time series.

format: TXT

mimetype: text/plain

en: Subcatchment polygons

en: Subcatchment polygons for use in the Google Earth Engine scripts.

en: MODIS NDSI script

en: Google Earth Engine script for computing MODIS normalized difference snow index (NDSI) values and averaging them over subcatchment areas.

en: MODIS EVI2 script

en: Google Earth Engine script for computing MODIS two-band enhanced vegetation index (EVI2) values and averaging them over subcatchments.

en: Metadata

media_type: application/pdf

en: Column descriptions for both data files, and map coordinates for all measurement locations.

format: PDF

mimetype: application/pdf

en: Daily time series

en: Daily hydrometeorological and ecohydrological time series

en:
Hydrometerological and ecohydrological time series from Sagehen Creek and Independence Creek, Sierra Nevada, USA, illustrating hydrological responses to daily cycles in snowmelt and evapotranspiration forcing.

Data include 30-minute time series of

- weather variables,

- sap flow fluxes,

- groundwater levels (in two riparian transects of shallow groundwater wells),

- and stream stages (at 12 sites spanning a 500-meter elevation gradient),

and daily time series of

- temperature, precipitation, and snow water equivalent at three nearby snow telemetry stations

- diel cycle index values for groundwater levels and stream stages,

- and MODIS normalized difference snow index (NDSI) and enhanced vegetation index (EVI2) values averaged over selected subcatchments.

Google Earth Engine scripts for extracting the MODIS data are also provided.

diel-cycle

display_name: diel-cycle

diurnal-cycle

display_name: diurnal-cycle

ecohydrology

display_name: ecohydrology

evapotranspiration

display_name: evapotranspiration

groundwater

display_name: groundwater

sap-flow

display_name: sap-flow

snowmelt

display_name: snowmelt

streamflow

display_name: streamflow

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Daily cycles in solar flux, snowmelt, transpiration, groundwater, and streamflow at Sagehen and Independence Creeks, Sierra Nevada, USA


maintainer: EnviDat Support

en: avalanche-fatalities avalanche-accidents number-of-dead-persons number-of-caught-persons avalanche-accident-statistics

en: Fatal avalanche accidents in Switzerland since 1995-1996

media_type: text/csv

format: CSV

mimetype: text/csv

en:
Attention: this data is not updated after 2022 anymore.
This data collection contains information concerning all accidents by snow avalanches causing at least one fatality in Switzerland. The data set commences on 01/10/1995. After the completion of a hydrological year, the new data is added.
The following information is provided:
 * avalanche identifier
 * date of the accident
 * accuracy of the date in range of days before and after
 * canton
 * name of the locality
 * start zone of the avalanche
  * coordinates (Swiss coordinate system, approximately in middle of start zone)
  * accuracy of the coordinates in meters
 * elevation (in meteres above sea level, app. in middle of start zone)
 * slope aspect (main orientation of start zone)
 * slope inclination (in degree, steepest point within start zone)
 * number of dead persons
 * number of caught persons
 * number of fully buried persons
 * forecasted avalanche danger level
 * activity/location of the accident party at the time of the incident

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-accidents

display_name: avalanche-accidents

avalanche-fatalities

display_name: avalanche-fatalities

number-of-caught-persons

display_name: number-of-caught-persons

number-of-dead-persons

display_name: number-of-dead-persons

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: strategic-spatial-planning spatial-planning strategic-projects urban-transformations large-scale-urban-development-projects land-use-transformations europe land-use-change

en: QCA data set large-scale urban development projects

en: Please refer to the sections: 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalization in the Metadata for further details on this resource.

en: QCA R script large-scale urban development projects Europe

en:
For the set up of this R script, we used the “QCA” (Duşa, 2019) and “SetMethods” (Oana and Schneider, 2018) R packages.

The following further resources were also used:
Dusa, A. (2019). QCA with R: A comprehensive resource. Springer: Berlin.
Schneider, C. Q., & Wagemann, C. (2012). Set-theoretic methods for the social sciences. A guide to qualitative comparative analysis. Cambridge: Cambridge University Press.
Thomann, E., Oana, I.-E., & Wittwer, S. (2018). Performing fuzzy- and crisp set QCA with R. A user-oriented beginner's guide. Retrieved from http://www.evathomann.com/links/qca-r-manual

format: SERVICE

en:
Table of Content: 1. General context of the data set "lsUDPs" ; 2. Background and aims of the study using the data set lsUDPs; 3. The data set lsUDPs: 3.1 Selection of cases and data collection; 3.2 Data management and operationalisation

1. General context of the data set "lsUDPs"
The data set "lsUDPs" has been generated as part of the CONCUR research project (https://www.wsl.ch/en/projects/concur.html) led by Dr. Anna M. Hersperger and funded by the Swiss National Science Foundation (ERC TBS Consolidator Grant (ID: BSCGIO 157789) for the period 2016-2020. The CONCUR research project is interdisciplinary and aims to develop a scientific basis for adequately integrating spatial policies (in this case, strategic spatial plans) into quantitative land-change modelling approaches at the urban regional level. The first stage (2016-2017) of the CONCUR project focussed on 21 urban regions in Western Europe. The urban regions were selected through a multi-stage strategy for empirical research (see Hersperger, A. M., Grădinaru, S., Oliveira, E., Pagliarin, S., & Palka, G. (2019). Understanding strategic spatial planning to effectively guide development of urban regions. Cities, 94, 96–105. https://doi.org/10.1016/j.cities.2019.05.032 ).

2. Background and aims of the study using the data set lsUDPs
As part of the CONCUR project, a specific task was to examine the relationship between strategic spatial plans and the formulation and implementation (i.e. urban land change) of large-scale urban development projects in Western Europe.
Strategic urban projects are typically large-scale, prominent urban transformations implemented locally with the aim to stimulate urban growth, for instance in the form of urban renewals of deprived neighborhoods, waterfront renewals and transport infrastructures. While strategic urban projects are referred to in the literature with multiple terms, in the CONCOR project we call them large-scale urban development projects (lsUDPs).
Previous studies acknowledged both local and supra-local (or structural) factors impacting the context-specific implementation of lsUDPs. Local governance factors, such as institutional capacity, coordination among public and private actors and political leadership, intertwine with supra-local conditions, such as state re-scaling processes and devolution of state competencies in spatial planning, de-industrialisation and increasing social inequality. Hence, in implementing lsUDPs, multi-scalar factors act in combination.
Because the formulation and implementation of lsUDPs require multi-scalar coordination among coalitions of public and private actors over an extended period of time, they are generally linked to strategic spatial plans (SSPs). Strategic spatial plans convey collective visions and horizons of action negotiated among public and private actors at the local and/or regional level to steer future urban development, and can contain legally binding dispositions, but also indicative guidelines.
The key question remains as to what extent large-scale urban development projects and strategic spatial plans can be regarded as aligned. By alignment, or “concordance”, we mean that strategic projects are formulated and implemented as part of the strategic planning process (“high concordance”), or that the strategic role of projects is reconfirmed in (subsequent) strategic plans (“moderate concordance”). Lack of concordance is found when lsUDPs have been limitedly (or not at all) acknowledged in strategic spatial plans.
We assume that certain local and supra-local factors, characterising the development of the projects, foster (but not strictly “cause”) the degree of alignment between lsUPDs and SSPs. In this study, we empirically examine how, and to what extent, the concordance between 38 European large-scale urban development projects and strategic plans (outcome: CONCOR) has been enabled by five multi-scalar factors (or conditions): (i) the role of the national state (STATE), (ii) the role of (inter)national private actors (PRIVATE), (iii) the occurrence of supra-regional external events (EVENTS), (iv) the degree of transport connectivity (TRANSP), and (v) local resistance from civil society (RESIST). We adopted a (multi-data) case-based qualitative strategy for empirical research and applied the formalised procedure of within- and cross-case comparison offered by fuzzy-set Qualitative Comparative Analysis appropriate for the goal of this study. Based on set theory, QCA formally integrates contextual sensitivity to case specificities (within-case knowledge) with systematic comparative analysis (across-case knowledge).
The research question the data set has been created to reply to is the following: which conditions, and combinations of conditions, enable the concordance between large-scale urban development projects and strategic spatial plans?
The conditions (“independent variables”) considered are. STATE: the set of large-scale urban projects characterized by a high degree of state intervention and support in their formulation and implementation, PRIVATE: the set of large-scale urban projects characterized by a high degree of involvement of (inter)national private actors in their formulation and implementation, EVENTS: the set of large-scale strategic projects whose formulation and implementation have been strongly affected by unforeseen international events and/or global trends, TRANSP: the set of large-scale strategic projects with a high degree of road and/or transit connectivity, and RESIST: set of large-scale strategic projects whose realization has been characterized by resistances that have substantially delayed or modified the project implementation.
The outcome (“dependent variable”) under analysis is CONCOR: the set of large-scale urban projects having a high degree of concordance/alignment/integration with strategic spatial plans

3. The data set lsUDPs

   3.1 Selection of cases and data collection
To generate the current data set on large-scale urban development projects in European urban regions (data set "lsUDPs"), we identified 35 large-scale urban development projects in a sample of the 21 Western urban regions considered in the CONCUR project (see supra, Hersperger et al. 2019): Amsterdam, Barcelona, Copenhagen, Hamburg, Lyon, Manchester, Milan, Stockholm, Stuttgart. The criteria we followed to identify the 35 large-scale urban development projects are: geographical location, size (large-scale), site (located either in the city core or in the larger urban region) and urban function (e.g. housing, transportation infrastructures, service and knowledge economic functions). Employing these criteria facilitated the selection of diverse large-scale urban development projects while still ensuring sufficient comparability.
In 2016, we performed 47 in-depth interviews with experts in urban and regional planning and large-scale strategic projects and infrastructure (i.e. academics and practitioners) about the formulation, implementation and development (1990s–2010s) of each project in each of the 9 selected urban regions. On average, each interviewee answered questions on 3.1 large-scale urban development projects. Three cases were subdivided into two cases because a clear differentiation between specific implementation stages was identified by the interviewees (expansion of the Barcelona airport, cases “bcn_airport80-90” and “bcn_airport00-16”; realisation of Lyon Part-Dieu, cases “lyo_partdieu70-90” and “lyo_partdieu00-16”; MediaCityUK, cases “man_salfordquays80-00” and “man_mediacityuk00-16”). Therefore, from the initial 35 cases, the final number of analysed cases in the lsUDPs dataset is 38.

    3.2 The data set lsUDPs: Data management and operationalisation
Interviews were fully transcribed and analysed through MAXQDA (version 12.3, VERBI GmbH, Berlin, Germany), and intercoder agreement was evaluated on a sample of nine interviews. We also compiled “synthetic case descriptions” (SCD) for each case (totalling more than 160 SCDs) to spot potential inconsistencies among interviewees’ accounts and to facilitate completion of the “calibration table” for each case (see below). An online expert survey distributed to the interviewees (response rate 78%) helped systematise the information collected during the interviews. We also consulted both academic and gray literature on the case studies to check for possible ambiguity and inconsistencies in the interview data, and to solve discrepancies between our assigned set membership scores and questionnaire values. Site visits were also carried out to retrieve additional information on the selected cases.
For each case (i.e. each of the 38 selected large-scale urban development projects), we operationalised each condition (i.e. STATE, PRIVATE, EVENTS, TRANSP, RESIST) and the outcome (CONCOR) in terms of sets, for subsequent application of Qualitative Comparative Analysis. This process is called “calibration”; we used a number of indicators for each condition to qualitatively assess each large-scale project across the conditions. The case-based qualitative assessment was then transformed into fuzzy-set membership values. Fuzzy-set membership values range from 0 to 1, and should be conceived as “fundamentally interpretative tools” that “operationalize theoretical concepts in a way that enhances the dialogue between ideas and evidence” (Ragin 2000:162, in “Fuzzy-set Social Science”. Chicago: University Press). We employed a four-value fuzzy-set scale (0, 0.33, 0.67, 1) to “quantify” into set membership scores the individual histories of cases retrieved from interview data. Only the condition TRANSP was calibrated as a crisp-set (0, 1).
The translation of qualitative case-based information into numerical fuzzy-set membership values was iteratively performed by populating a calibration table following standard practices recently emerged in QCA when dealing with qualitative (interview) data.

europe

display_name: europe

land-use-change

display_name: land-use-change

land-use-transformations

display_name: land-use-transformations

large-scale-urban-development-projects

display_name: large-scale-urban-development-projects

spatial-planning

display_name: spatial-planning

strategic-projects

display_name: strategic-projects

strategic-spatial-planning

display_name: strategic-spatial-planning

urban-transformations

display_name: urban-transformations

en: lsUDPS Large-scale urban development projects in European urban regions


en: latent-semantic-analysis food-taste-similarity national-dishes agro-food-trade food-preferences

en: information on ingredients of national dishes

en: shows information of ingredients of all national dishes of 171 countries and their names

en: dyadic food similarity measures, pairwise similarity and dissimilarity (chord diagram)

en:
The figures show the distribution of two dyadic food tastes similarity measures on the base of
the national dishes: (i) the Manhattan distance and the (ii) latent semantic analysis. The chord diagram
shows the results for country pairs with most and less similarity on basis of the LSA-approach.

en: National dishes, migration data and data for bilateral food trade flows

en:
The data include information on national dishes, migration data and data for bilateral food
trade flows for 5 years as well as importer and exporter GDP, population, distance between
most populated cities, bilateral information on Preferential Trade Agreements, common
official primary langauge, common colonizer post-1945, colonial relationship for overall
171 countries. The final data set contains 145,350 observations (29,070 country pairs for
5 years)

en: The data described in this article were collected daily over the period 4 June 2018 to 23 August 2018 and contains information of several data sources. The database includes information on national recipes and their ingredients for 171 countries, measures for food taste similarities between all 171 countries as well as bilateral migration and agro-food trade data for 5 years. The database can be used for analyzing e.g., the relation between food preferences and international trade or food preferences and health outcomes (e.g., obesity) across countries.

agro-food-trade

display_name: agro-food-trade

food-preferences

display_name: food-preferences

food-taste-similarity

display_name: food-taste-similarity

latent-semantic-analysis

display_name: latent-semantic-analysis

national-dishes

display_name: national-dishes

en: Data of national dishes, their similarity and trade flows


en: hac2 ccn cloud-droplets hygroscopicity aerosol

format: XLS

en: This repository contains the datasets that were used for used for the paper:: Drivers of Droplet Formation in East Mediterranean Orographic Clouds, EGUsphere, https://doi.org/10.5194/egusphere-2024-490, 2024.

aerosol

display_name: aerosol

ccn

display_name: ccn

cloud-droplets

display_name: cloud-droplets

hygroscopicity

display_name: hygroscopicity

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Dataset for the publication Drivers of Droplet Formation in East Mediterranean Orographic Clouds


en: complex-terrain orographic-precipitation precipitation-variability cosmo-wrf snow-precipitation

media_type: application/zip

en: Snow depth maps over Dischma valley for 26 January 2016 and 9 March 2016 and snow depth differences between the two dates.

format: ZIP

mimetype: application/zip

en: StationData

en:
The data presented here corresponds to the publication "Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain" (Gerber et al., 2018a), which investigates the precipitation variability of snow precipitation in the central northern part of the Grisons (CH) and the publication "The importance of near-surface winter precipitation processes in complex alpine terrain" (Gerber et al., 2018b). The dataset contains:

* WRFsimulations: WRF simulation output for simulations with 4x (14x) terrain smoothing with an output timestep of 30 min/5 min and horizontal grid spacings of 1350 m, 450 m, 150 m and 50 m (currently: data available upon request).
* StationData: Meteorological station data of 18 meteorological stations in the central northern part of the Grisons with 30 minute resolution for the period 1 January 2016 till 1 May 2016.
* ADS80data: Photogrammetrically determined snow depth distribution data over the Dischma valley for the 26 January 2016 and 9 March 2016. Snow heights are corrected for buildings, vegetation (> 1m), outliers, and pixles, which are obivously snow-free on the pictures (Bühler et al., 2015). In addition the snow depth differences (snow depth on 9 March 2016 minus snow depth on 26 January 2016) are provided.

For more details about the simulation and observation data, see Gerber et al., 2018 and Gerber and Sharma (2018).

Publications:

Bühler, Y., Marty, M., Egli, L., Veitinger, J., Jonas, T., Thee, P., and Ginzler, C.: Snow depth mapping in high-alpine catchments using digital photogrammetry. Cryosphere, 9, 229–243, doi:10.5194/tc-9-229-2015, 2015.

Gerber, F., Besic, N., Sharma, V., Mott, R., Daniels, M., Gabella, M., Berne, A., Germann, U., and Lehning, M.: Spatial variability in snow precipitation and accumulation in COSMO-WRF simulations and radar estimations over complex terrain, The Cryosphere, 12, 3137–3160, doi:10.5194/tc-12-3137-2018, 2018.

Gerber, F., Mott, R. and Lehning, M.: The importance of near-surface winter precipitation processes in complex alpine terrain, Journal of Hydrometeorology, accepted, 2018.

Gerber, F., and Sharma, V.: Running COSMO-WRF on very-high resolution over complex terrain. Laboratory of Cryospheric Sciences CRYOS, École Polytechnique Fédérale de Lausanne EPFL, Lausanne, Switzerland. doi:10.16904/envidat.35, 2018.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

orographic-precipitation

display_name: orographic-precipitation

precipitation-variability

display_name: precipitation-variability

snow-precipitation

display_name: snow-precipitation

en: DISCHMEX - High-resolution WRF simulations in complex alpine terrain and station measurements


maintainer: Paraskevi Georgakaki

en: ice-crystal-number-concentration jungfraujoch blowing-snow wrf liquid-water-content swiss-alps ice-water-content secondary-ice-production

en: WRF outputs

en:
The .zip file contains all the NetCDF outputs produced by the mesoscale Weather Research and Forecasting (WRF) model (version: 4.0.1). Two case studies were simulated in this study, between 25-28 January 2014 (00:00 UTC) and 29 January - 1 February 2014 (00:00 UTC), respectively. The former is denoted as "NW" and the latter as "SE", owing to the prevailing wind conditions at the Jungfraujoch (JFJ) station.

The outputs come from the innermost domain of the simulations with a spatial resolution of 1 km and are extracted from the nearest to JFJ model grid point (46.55°N 7.98°E). The dimensions of each model variable is [145,100], which corresponds to time and height, respectively. The frequency of the outputs is 30 min. Note that the first 24 hours of each simulation (i.e., the first 48 outputs) were considered spin up time.

The following sets of sensitivity simulations were presented in this study:

* CNTRL_NW.nc, CNTRL_SE.nc : Sensitivity simulations performed with the default version of WRF
* DS_PHILL_NW.nc, DS_PHILL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Phillips et al. (2018)
* DS_SULL_NW.nc, DS_SULL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Sullivan et al. (2018)
* PHILL_NW.nc, PHILL_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Phillips et al. (2017)
* TAKAH_NW.nc, TAKAH_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Sullivan et al. (2018) based on Takahashi et al. (1995)
* TAKAHrim_NW.nc, TAKAHrim_SE.nc : Same set-up as before but applied only to collisions between rimed ice particles
* BIPS_Xk0_DY_NW.nc, BIPS_Xk0_DY_SE.nc : Sensitivity simulations including a source of Xk0 (either 10.0 or 100.0 L⁻¹) ice crystals with sizes of DY (either 10 or 100 μm) in the first atmospheric level of the model
* BIPS100_PHILL_NW.nc, BIPS100_PHILL_SE.nc : Sensitivity simulations where the combined effect of blowing snow and ice-ice collisional break-up is examined

en: Observational data

en:
The .zip file contains 6 .csv files including all microphysical measurements taken at the Jungfraujoch station during the two periods of interest:

* 25-28 January 2014 : northwesterly-winds (NW)
* 29 January - 1 February 2014 : southeasterly-winds (SE)

The total Ice Crystal Number Concentration (ICNC; reported in L⁻¹) is measured by the two-dimensional stereo hydrometeor spectrometer (2D-S; Lawson et al., 2006) over the size range 10-1280 μm. The total ice water content (IWC; reported in gm⁻³) is also derived by the 2D-S data using the Brown and Francis (1995) mass-diameter relationship. Finally, the quantification of the liquid water content (LWC; reported in gm⁻³) is based on the liquid droplet size distribution data derived from a DMT cloud droplet probe (CDP; Lance et al., 2010) over the size range 2-50 μm. The frequency of the measurements in the .csv files is 30 min, to match the output frequency of the model. Datetime is also reported in the files (DD/MM/YYYY h:mm) in UTC.

Acknowledgment: Collection and pre-processing of the microphysical measurements has been performed by Gary Lloyd (gary.lloyd@manchester.ac.uk). More details about the instrumentation during the CLACE2014 campaign can be found in Lloyd et al. (2015).

en:
This repository contains all WRF model outputs and observational data sets used for the paper:
Georgakaki, P., Sotiropoulou, G., Vignon, É., Billault-Roux, A.-C., Berne, A., and Nenes, A.: Secondary ice production processes in wintertime alpine mixed-phase clouds, Atmos. Chem. Phys. Discuss., https://doi.org/10.5194/acp-2021-760, in review, 2021.

blowing-snow

display_name: blowing-snow

ice-crystal-number-concentration

display_name: ice-crystal-number-concentration

ice-water-content

display_name: ice-water-content

jungfraujoch

display_name: jungfraujoch

liquid-water-content

display_name: liquid-water-content

secondary-ice-production

display_name: secondary-ice-production

swiss-alps

display_name: swiss-alps

wrf

display_name: wrf

en: Data for the publication "Secondary ice production processes in wintertime alpine mixed-phase clouds"


maintainer: Jürg Schweizer

en: avalanche-forcasting danger-level snow-avalanche avalanche-activity avalanche-size

en: Readme

en: The Readme file contains the description of the two data files.

en: Snow avalanche data

en: This data file includes data on the avalanches mapped in the region of Davos.

en: Avalanche activity data

en: This data file includes data on the avalanche activity per day aggregated from the avalanche data.

en:
These data include all avalanches that were mapped in the region of Davos, Switzerland during the winters 1998-1999 to 2018-2019 (21 years), in total 13,918 avalanches, and the corresponding forecast danger level valid on the day of avalanche occurrence, 3533 days and danger ratings in total.

This avalanche activity data set was analysed and results published by Schweizer et al. (2020). They found that the
number of avalanches per day strongly increased with increasing danger level, but avalanche size was poorly related to avalanche danger level.

The data are provided in two files: the first includes the avalanche data (13,918 records); the second includes the avalanche activity per day (3533 records).
Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Schweizer, J., Mitterer, C., Techel, F., Stoffel, A. and Reuter, B., 2020. On the relation between avalanche occurrence and avalanche danger level. The Cryosphere, 14, 737-750, https://doi.org/10.5194/tc-14-737-2020.

avalanche-activity

display_name: avalanche-activity

avalanche-forcasting

display_name: avalanche-forcasting

avalanche-size

display_name: avalanche-size

danger-level

display_name: danger-level

snow-avalanche

display_name: snow-avalanche

en: Snow avalanche data Davos, Switzerland, 1999-2019


maintainer: Adam Winstral

en: jules-investigation-model snow-depth snow jim snow-simulation

en: File/data descriptor

en: DEM

en: 1-km resolution DEM used for downscaling gridded NWP data to stations and for distributing BDE evaluations at HS-stations to SWE-stations

en: HS and SWE observations

en: Automated (HS) and manual (SWE) data used to evaluate model simulations

en: Station forcing data

en: All forcing data need to run JIM at HS and SWE stations. These are data downscaled directly from COSMO NWP data (WY14, WY15) and further enhanced by additional station observations of snow depth (HS) and air temperature (Ta) in WY17. Further information can be found in README file. Note that in WY14 and WY15, shortwave radiation was not split into direct and diffuse (not necessary for JIM) and that the default method in JIM for splitting precipitation phase was used. In WY 17, direct and diffuse were combined as input to JIM and JIM was forced with pre-processed liquid and solid precipitation phases.

en: These data were used to drive and evaluate Jules Investigation Model (JIM) snow simulations. The data provided are the forcing data used for the "deterministic" runs as described in Winstral et al., 2019. The bias-detecting ensemble (Winstral et al., 2019) used observed snow depths (HS) to detect biases in these deterministic simulations related to precipitation and energy inputs to JIM. Simulations that included the BDE evaluations substantially improved JIM simulations.

jim

display_name: jim

jules-investigation-model

display_name: jules-investigation-model

snow

display_name: snow

snow-depth

display_name: snow-depth

snow-simulation

display_name: snow-simulation

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Meteorological data used to develop and validate the bias-detecting ensemble (BDE)


maintainer: Ueli Reber

en: policy-analysis switzerland bgb text-corpus policy-documents biodiversity environmental--policy

en: Replication files

en:
 Introduction

The ZIP file contains all data and code to replicate the analyses reported in the following paper.

Reber, U., Fischer, M., Ingold, K., Kienast, F., Hersperger, A. M., Grütter, R., & Benz, R. (2022). Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics. *Policy Sciences*. [https://doi.org/10.1007/s11077-022-09456-4](https://doi.org/10.1007/s11077-022-09456-4)

If you use any of the material included in this repository, please refer to the paper. If you use (parts of) the text corpus, please also refer to the sources used for its compilation listed below. The content of the texts may not be changed.

 Data folder

The data folder contains the following files.

* _corpus.parquet_: Text corpus of Swiss policy documents
* _dict_de.csv_: Biodiversity dictionary (German)
* _dict_fr.csv_: Biodiversity dictionary (French)
* _dict_it.csv_: Biodiversity dictionary (Italian)
* _topic_labels.csv_: labels/codes for policy sectors
* _topics.csv_: labels/codes for policy sectors

The corpus and the dictionary were compiled by the authors specifically for this project. The labels/codes for policy sectors are based on the [coding scheme](http://ws-old.parlament.ch/affairs/topics) of the Swiss Parliament.

 Text corpus

The text corpus consists of 439,984 Swiss policy documents in German, French, and Italian from 1999 to 2018. The corpus was compiled from the following source between 2020-10-01 and 2021-01-31.

* Transcripts and parliamentary businesses (e.g. questions, motions, parliamentary initiatives) via the [Web Services (WS)](https://www.parlament.ch/de/%C3%BCber-das-parlament/fakten-und-zahlen/open-data-web-services) provided by the Swiss Parliament
* The official compilation of federal legislation ("Amtliche Sammlung", AS) via [opendata.swiss](https://opendata.swiss/de/dataset/official-compilation-of-federal-legislation-bs-as-1947-2018) provided by the Swiss Federal Archives (SFA)
* The federal gazette ("Bundesblatt") via [fedlex.admin.ch](https://www.fedlex.admin.ch/de/fga/index)
* Decisions of federal courts via [entscheidsuche.ch (ES)](https://entscheidsuche.ch/)

The corpus is stored in a single data frame to use with R saved as [PARQUET](https://parquet.apache.org/) file (corpus.parquet). The data frame has the following structure.

* _text_id_: Unique identifier for each text (source information as prefix, e.g. "t_")
* _doc_type_: Document type (see coding scheme below)
* _branch_: Government branche (1 legislative, 2 executive, 3 judicative)
* _stage_: Stage of policy process (1 drafting, 2 introduction, 3 interpretation)
* _year_: Year of publication
* _topic_: Policy sector (coding scheme in separate file in data folder)
* _lang_: Language (de, fr, it)
* _text_: Text

The following list contains the coding scheme for the doc_type variable.

* 101: Federal gazette // Draft for public consultation ("Vernehmlassungsverfahren")
* 102: Federal gazette // Explanation of draft for parliament ("Botschaft")
* 103: Federal gazette // Strategy, action plan
* 104: Federal gazette // Federal council decree ("Bundesratsbeschluss")
* 105: Federal gazette // (Simple) Federal decree ("(Einfacher) Bundesbeschluss")
* 106: Federal gazette // General decree ("Allgemeinverfügung")
* 107: Federal gazette // Treaty ("Übereinkommen")
* 108: Federal gazette // Treaty ("Abkommen")
* 109: Federal gazette // Draft for parliament ("Entwurf")
* 110: Federal gazette // Report ("Bericht")
* 111: Federal gazette // Report of parliamentary comission ("Bericht")
* 112: Federal gazette // Report of federal council ("Bericht")
* 201: Parl. businesses // Submitted text
* 202: Parl. businesses // Reason text
* 203: Parl. businesses // Federal council response
* 204: Parl. businesses // Initial situation
* 205: Parl. businesses // Proceedings
* 301: Parl. transcripts // Speech of MP
* 302: Parl. transcripts // Speech of federal council
* 401: Federal legislation // Legal text of the official compilation (law, ordinances, etc.)
* 501: Court decisions // Federal Supreme Court
* 502: Court decisions // Federal Criminal Court
* 503: Court decisions // Federal Administrative Court

 Code folder

The code folder contains all R code for the analyses. The files are numbered chronologically.

* _1_classifier_training.R_: Training of classifiers for classification of policy sectors
* _2_classifier_application.R_: Classification of documents in corpus
* _3_dictionary_application.R_: Biodiversity indexing of documents in corpus
* _4_stm_truncation.R_: Truncation of indexed documents to keep only relevant parts
* _5_stm_translation.R_: Translation of FR and IT documents to DE
* _6_stm_model.R_: Preprocesssing and structural topic model
* _7_plots.R_: Plots and numbers as included in the paper

The code/functions folder contains custom functions used in the scripts, e.g. to support topic model interpretation.

Package versions and setup details are noted in the code files.

 Contact

Please direct any questions to Ueli Reber (ueli.reber@eawag.ch).

bgb

display_name: bgb

biodiversity

display_name: biodiversity

environmental--policy

display_name: environmental--policy

policy-analysis

display_name: policy-analysis

policy-documents

display_name: policy-documents

switzerland

display_name: switzerland

text-corpus

display_name: text-corpus

en: Replication files for "Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics"


photogrammetric-drone-data-gruenbodeli

title_for_slug: photogrammetric-drone-data-gruenbodeli

en: uav snow-depth-mapping drone-data photogrammetry orthophoto dsm wingtra

en: Data Access

en:
- ortho (3 cm/25 mm resolution)
- DSM (10 cm resolution)
- HS (10 cm resolution)
- RGB images
- Agisoft Metashape Project Report

All products are also available as a cloud optimized geotiff.

en:
We conducted various drone flights at Grüenbödeli near Davos with the Sony RX1R II mounted on a Wingtra drone during 2020/21/22. The data was processed with the Agisoft Metashape Professional Software.
The following products are available for download:
- DSM 10cm resolution
- Orthomosaic 3cm/25mm resolution
- Snow Raster 10cm resolution
- original RGB images

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

snow-depth-mapping

display_name: snow-depth-mapping

uav

display_name: uav

wingtra

display_name: wingtra

en: Photogrammetric Drone Data Grüenbödeli


maintainer: Virginie Marques

en: biodiversity dna-metabarcoding fjord fish environmental-dna plankton marine

en: Metabarcoding data

en: Raw metabarcoding data for both primers (teleo and 18S) and corresponding file to perform the demultiplexing and primer trimming

en: Code, data and figures

en: Here there are all the data and code to reproduce the figures and analysis presented in the paper, with a README.md file

en:
This dataset contains the raw environmental DNA data associated with the publication *Environmental drivers of eukaryotic plankton and fish biodiversity in an Arctic fjord* in the journal Polar Biology (2023).

 Methods

**Sampling**
We sampled the Lilliehöök fjord on the west coast of Spitsbergen (Svalbard, Norway) over 3 days from 3 to 5 of August 2021. Samples were taken from the glacier front up to the fjord mouth of the Krossfjorden system, around 30 km long, after the Lilliehöök fjord merged with the mouth of Möller fjord. The fjord’s maximum depth has been recorded at 373 m (Svendsen et al. 2002) and has no sill at its entrance, thereby facilitating water exchange with the open ocean of the West Spitsbergen Current. We used a research vessel to sample 5 sites for a total of 15 samples, sampling 3 depths per site (3-m, chlorophyll a maximum and 85-m, unless sea floor was shallower). Shallow and intermediate samples between 3-m and 12-m represent ~35-L of water filtered in-situ using long tubing and a peristaltic pump, and all other deeper samples were taken from a total of 3 Niskin bottles (General Oceanics), representing 22-L of water sampled per sample. Water was filtered through a VigiDNA filtration capsule (SPYGEN) with a 0.20-µm pore size using an Athena peristaltic pump (Proactive Environmental Products, Bradenton, Florida) with a flow rate of ~1-L/min. Each sample was handled with single use tubing and gloves.

**Molecular**
To perform the amplification, we used two sets of primers: teleo (forward: ACACCGCCCGTCACTCT, reverse: CTTCCGGTACACTTACCATG; Valentini et al. 2016) and the universal eukaryotic 1389F/1510R primer pair, amplifying the V9-18S rDNA gene (Amaral-Zettler et al. 2009) (forward: TTGTACACACCGCCC, reverse: CCTTCYGCAGGTTCACCTAC).

 Data content:

+ Metabarcoding data: This zip file contains the 2 sequencing libraries filtered to only retain the samples used in the present study.
+ Code, data and figure: This zip file contains all data and code to reproduce the figures and the analysis in the study, with an associated README explaining the content of each folder.

 Additional informations
For more details, please see the Methods in the associated publication: DOI: 10.1007/s00300-023-03187-9.

dna-metabarcoding

display_name: dna-metabarcoding

environmental-dna

display_name: environmental-dna

fish

display_name: fish

fjord

display_name: fjord

marine

display_name: marine

plankton

display_name: plankton

en: Data: Environmental drivers of eukaryotic plankton and fish biodiversity in an Arctic fjord


maintainer: Elisabeth Hafner

en: avalanche-mapping avalanche-size-estimation avalanche reliability remote-sensing

en: AvalancheReliabilityData

en: The .zip contains all data used to conduct the reliability study as well as the results, a detailed description of the included files is contained in the included pdf. All geospatial data is provided in the Swiss Coordinate System: CH1903+ / LV95 (EPSG 2056). For any use of the data the proper citation provided is obligatory!

mimetype: application/x-zip-compressed

en:
This dataset contains the data used and collected to investigate the reliability of avalanche size estimates and avalanche outlines (see related publications). Namely this is

 Avalanche size estimates

* the 10 pictures depicting avalanches
* the survey results from the 170 participants

 Avalanche outlines mapped from oblique photographs
* the pictures of the six avalanches
* the avalanche outlines mapped by the 10 participants
* the reference mapped from the georeferenced photographs

 Avalanche outlines from remotely-sensed imagery
* the orthophotos in the four different resolutions (2m, 1m, 50cm, 25cm)
* the area of interest (AoI) delimiting the research area
* the avalanche mappings in each resolution for all five participants
* the shade masks used to separate illuminated and shaded areas

The acquisition of the orthophotos has been partially supported by the Swiss National Science Foundation (SNF; Grant N°200021_172800).

avalanche

display_name: avalanche

avalanche-mapping

display_name: avalanche-mapping

avalanche-size-estimation

display_name: avalanche-size-estimation

reliability

display_name: reliability

remote-sensing

display_name: remote-sensing

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data reliability study: avalanche size estimates and outlines


maintainer: Andrin Caviezel

en: stonenodedata rockfall-runout rockfall sensor-stream rockfall-experiments induced-rockfall deposition-points stonenode dem natural-hazards

en: StoneNode v1.0 Data for equipped experimental Runs.

en: Corresponding StoneNode v1.0 data streams belonging to the deposition points.

en: Induced Rockfall Data, Tschamut, GR

en:
 Induced Rockfall Experimental Data, Tschamut, GR, Switzerland

The archive contains site specific geographical data as well as the deposition points of manually induced rockfall by releasing differently shaped boulders with 30–80 kg of mass. Additionally availabe are the StoneNode v1.0 sensor streams for the equipped rocks.

The _OverviewFigures_ file serves as quick representation of the included data. It also contains the overview table for the rock masses in order to set the dimensions accordingly in RAMMS::ROCKFALL.

The archive contains the following folders:
<\ul>
* DEM: ArcGIS compatible DEM Tschamut_DEM_2m (grid resolution of 2 m) as well as the .asc grid used in RAMMS::ROCKFALL simulations
* _DepositionPoints_: containing two folders _RF Tschamut Frozen_ and _RF Tschamut WET_ containing each a shapefile with the complete deposition data of each series as well as deposition shapfiles for each rock shape.
* _DigitizedRocks_: Digitized point clouds of the used rocks as used for RAMMS::ROCKFALL simulations (.pts files) (dimensions have to be checked).
* _Orthofoto_: Orthophoto of the experimental site obtained via UAV with 5 cm resolution.

en:
 Dataset of an experimental campaign of induced rockfall in Tschamut, Grisons, Switzerland.

The data archive contains site specific geographical data such as DEM and orthophoto as well as the deposition points of manually induced rockfall by releasing differently shaped boulders with 30–80 kg of mass. Additionally available are all the StoneNode data streams for rocks equipped with a sensor. The data set consists of

* Deposition points from two series (wet (27/10/2016) and frozen (08/12/2016) ground)
* Digital Elevation Model (grid resolution 2 m) obtained via UAV
* Orthophoto (5 cm resolution) obtained via UAV
* Digitized rock point clouds (.pts input files for RAMMS::ROCKFALL)
* StoneNode v1.0 raw data stream for equipped rocks.

Further information is found in

* A. Caviezel et al., _Design and Evaluation of a Low-Power Sensor Device for Induced Rockfall Experiments_, IEEE Transactions on Instrumentation and Measurement, 2018, 67, 767-779, http://ieeexplore.ieee.org/document/8122020/
* P. Niklaus et al., _StoneNode: A low-power sensor device for induced rockfall experiments_, 2017 IEEE Sensors Applications Symposium (SAS), 2017, 1-6, http://ieeexplore.ieee.org/document/7894081/

dem

display_name: dem

deposition-points

display_name: deposition-points

induced-rockfall

display_name: induced-rockfall

natural-hazards

display_name: natural-hazards

rockfall

display_name: rockfall

rockfall-experiments

display_name: rockfall-experiments

rockfall-runout

display_name: rockfall-runout

sensor-stream

display_name: sensor-stream

stonenode

display_name: stonenode

stonenodedata

display_name: stonenodedata

en: Induced Rockfall Dataset (Small Rock Experimental Campaign), Tschamut, Grisons, Switzerland


en: atmospheric-conditions carbon-dioxide ecophysiology forest-characteristics open-data climate-change icp-forests metadata twd co2 forest-canopy seehornwald forest-monitoring ilter forest-area ecosystem-functioning automated-monitoring subalpine treenet dendrometer climate-growth forest-function carbon-sequestration sap-flow biomass forest-dynamics lwf davos water-relations forest-ecosystems eddy-covariance icos forest-biomass eddy-covariance-measurements forest flux stem-growth dbh carbon-storage picea-abies tree-stem carbon-cycle

en: Readme

en: Readme file contains the list of material that comes with the download

en: Collection of files with information about the research site Seehornwald Davos CH-DAV

en: Site description of the Seehornwald Davos (CH-DAV) research site. The material provided offers information on the biomass and growth of trees in CH-DAV, including supporting materials such as maps, geolocations and analyses. CH-DAV is part of networks such as ICOS, LWF, TreeNet, ICPForests and is dedicated to forest monitoring and research.

atmospheric-conditions

display_name: atmospheric-conditions

automated-monitoring

display_name: automated-monitoring

biomass

display_name: biomass

carbon-cycle

display_name: carbon-cycle

carbon-dioxide

display_name: carbon-dioxide

carbon-sequestration

display_name: carbon-sequestration

carbon-storage

display_name: carbon-storage

climate-change

display_name: climate-change

climate-growth

display_name: climate-growth

davos

display_name: davos

dbh

display_name: dbh

dendrometer

display_name: dendrometer

ecophysiology

display_name: ecophysiology

ecosystem-functioning

display_name: ecosystem-functioning

eddy-covariance

display_name: eddy-covariance

eddy-covariance-measurements

display_name: eddy-covariance-measurements

flux

display_name: flux

forest

display_name: forest

forest-area

display_name: forest-area

forest-biomass

display_name: forest-biomass

forest-canopy

display_name: forest-canopy

forest-characteristics

display_name: forest-characteristics

forest-dynamics

display_name: forest-dynamics

forest-ecosystems

display_name: forest-ecosystems

forest-function

display_name: forest-function

forest-monitoring

display_name: forest-monitoring

icos

display_name: icos

icp-forests

display_name: icp-forests

ilter

display_name: ilter

lwf

display_name: lwf

metadata

display_name: metadata

open-data

display_name: open-data

picea-abies

display_name: picea-abies

sap-flow

display_name: sap-flow

seehornwald

display_name: seehornwald

stem-growth

display_name: stem-growth

subalpine

display_name: subalpine

tree-stem

display_name: tree-stem

treenet

display_name: treenet

twd

display_name: twd

water-relations

display_name: water-relations

en: Site description Davos Seehornwald CH-DAV


data-set-on-snow-instability

title_for_slug: data-set-on-snow-instability

en: rutschblock slab-tensile-support weak-layer snow-avalanche propgatoin-saw-test slab avalanche-forcasting snow-stability-evaluation crack-propagation failure-initiation

en: data set on snow instability

en: Read-me file on snow instability data

en:
These data on snow instability include three data subsets that were analyzed and the results published by Reuter and Schweizer (2018) who suggest a novel framework on how to describe snow instability by failure initiation, crack propagation and slab tensile support.

Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Reuter, B. and Schweizer, J., 2018. Describing snow instability by failure initiation, crack propagation and slab tensile support. Geophys. Res. Lett., 45, doi: 10.1029/2018GL078069.

avalanche-forcasting

display_name: avalanche-forcasting

crack-propagation

display_name: crack-propagation

failure-initiation

display_name: failure-initiation

propgatoin-saw-test

display_name: propgatoin-saw-test

rutschblock

display_name: rutschblock

slab

display_name: slab

slab-tensile-support

display_name: slab-tensile-support

snow-avalanche

display_name: snow-avalanche

snow-stability-evaluation

display_name: snow-stability-evaluation

weak-layer

display_name: weak-layer

educ

en: Education, culture and sport

en: Data set on snow instability


maintainer: Rebecca Mott

en: patchy-snow-covers eddy-covariance-measurements dischmex turbulent-sensible-heat-fluxes snow-patch

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 0.7 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (DA-600, Kaijo-Denki) in 0.3 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.3 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 3.2 m on a daily basis.

en: Gletschboden setup

media_type: image/png

en: Background map based on data © 2014/2016 swisstopo (JD100042)

format: PNG

mimetype: image/png

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.6 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.5 m.

en: Output explanation

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 1.7 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.2 m.

en:
This dataset contains eddy-covariance measurements in the ablation period of 2014-2016. Measurements were taken from two turbulence towers over a long-lasting snow patch, which are 5 m apart from each other (2014 and 2015). The turbulence towers were equipped with two YOUNG ultrasonic anemometers mounted 0.7 m (in 2014) and 3.3 m (in 2015) above snow-free ground, two ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) mounted at 2.6 m (in 2014) and 2.2 m (in 2015) above snow-free ground and one anemometer (DA-600, Kaijo Denki) mounted at 0.3 m above snow surface.

The measurement setup changed in 2016 and includes a measurement above the snow-free ground in upwind direction (Swiss coordinates: 790191/176689). The measurement tower is equipped with one ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 3.3 m above the snow-free ground. Additionally, one measurement tower is installed above the long-Lasting snow patch and equipped with the same setup as 2015.

Turbulence data were sampled at a frequency of 20 Hz. The processing of the data to quality controlled fluxes has been done with the Biomicrometeorology flux software (Thomas et al., 2009). The program applies plausibility tests and a despiking test after Vickers and Mahrt (1997) on the measured data. The routine further applies a time-lag correction and considers the deployment (e.g. the sonic azimuth). A frequency response correction (Moore, 1986) is done and a three-dimensional rotation is performed. Finally, quality assurance/quality control (QA/QC) flags after Foken et al., (2004) are issued and fast Fourier transform power and co-spectra are calculated. The change in snow height is considered in the post-processing for every measurement day. The turbulence data were averaged to 30 minute intervals.

dischmex

display_name: dischmex

eddy-covariance-measurements

display_name: eddy-covariance-measurements

patchy-snow-covers

display_name: patchy-snow-covers

snow-patch

display_name: snow-patch

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: DISCHMEX - Impact of extreme land-surface heterogeneity on micrometeorology over spring snow-cover


en: avalanches snow-depth-distribution snow-hydrology dischma davos photogrammetry

en: Snowdepth maps

format: GeoTIFF

en:
The available datasets are snow depth maps with a spatial resolution of 0.5 m derived from images of the survey camera Vexcel Ultracam mounted on a piloted airplane. Image acquisition was carried out during the approximately peak of winter (time when the thickest snowpack is expected) in spring. The snow depth maps are calculated by the subtraction of a summer-DTM from the processed winter- DSM of the corresponding date. The summer-DTM used was derived from a point cloud of an airborne laser scanner from 2020.

Due to the occurrence of inaccuracies of the calculated snow depth values caused by the photogrammetric method, we applied different masks to significantly increase the reliability of the snow depth maps. We masked out settled areas, high-frequented streets and technical constructions, pixels with high vegetation (height > 0.5 m) , outliers and unrealistic snow depth values. In addition, we modified the snow depth values of snow-free pixels to 0.
The information on buildings and infrastructure comes from the exactly classified ALS point cloud and the TLM dataset from Swisstopo (https://www.swisstopo.admin.ch/de/geodata/landscape/tlm3d.html#links). High vegetation is also derived from the classification and the calculated object height from the point cloud.
Outliers and unrealistic snow depth values are defined as negative snow depth values and snow depths exceeding 10 m. The classification of each pixel of the corresponding orthophoto into snow-covered or snow-free is based on the application of a threshold of the NDSI or manually determined ratios of the RGB values.

An extensive accuracy assessment proves the high accuracy of the snow depth maps with a root mean square error of 0.25 m for the year 2017 and 0.15 m for the following snow depth maps.

The work is published in:

avalanches

display_name: avalanches

davos

display_name: davos

dischma

display_name: dischma

photogrammetry

display_name: photogrammetry

snow-depth-distribution

display_name: snow-depth-distribution

snow-hydrology

display_name: snow-hydrology

educ

en: Education, culture and sport

en: Snow depth mapping by airplane photogrammetry (2017 -  ongoing)


maintainer: Yohann Chauvier

en: climate grain-size soil taxonomic-diversity ecological-indicator-values functional-diversity phylogenetic-diversity

en: Data access

en:
This dataset comprises a large array of ecological data for the European Alps:

  (1) Current soil and climate predictors at various resolutions.
  (2) GBIF observations of the European Alps Flora (~4,000 species).
  (3) Species habitat suitability maps (1,109 species; based on species observations filtered at 40x40-km)
  at various resolutions used in the study to generate (4); except 'expert'...
  (4) Expert, Taxonomic, phylogenetic and functional diversity of the study region at various resolutions
  (from 100-m to 40-km --> 100-m aggregated & mean to km + non-aggregated/predicted) for CLIM,
  SOIL and CLIM-SOIL models.
  (5) Ecological and altitudinal preferences of the European Alps Flora.
  (6) Data outputs of the related published article.
  (7) All scripts used for analyses.
  (8) Additional files used for analyses.
  (9) Improved set of species habitat suitability maps (~2,600 species; based on species observations
  filtered at 1x1-km) and related taxonomic diversity at 100-m resolution (aggregated to km +
  non-aggregated/predicted) for CLIM, SOIL and CLIM-SOIL models ---> not incorporated in the study.

climate

display_name: climate

ecological-indicator-values

display_name: ecological-indicator-values

functional-diversity

display_name: functional-diversity

grain-size

display_name: grain-size

phylogenetic-diversity

display_name: phylogenetic-diversity

soil

display_name: soil

taxonomic-diversity

display_name: taxonomic-diversity

en: Resolution in species distribution models shapes spatial patterns of plant multifaceted diversity


radiosondes

maintainer: Jörg Wieder

title_for_slug: radiosondes

en: wind-direction temperature pressure raclets wind holoballoon radiosonde relative-humidity

en: Radiosond Template Files

en:
The "template" files contain standard parameters, i.e. ambient pressure (mbar and Pa), temperature (°C), relative humidity (%), wind speed (m s‾ ¹) and wind direction (true deg), as well as additional information, e.g. time (UTC and local time), dew point (°C), mixing ration (g/kg), density (kg m³), altitude (m MSL), height above ground (ft and m AGL), and geographic coordinates (longitude, latitude). If the wind speed was zero, no wind direction is given.
The zip files contain ascents on the following days:
February 10 (morning and afternoon),
February 11 (morning),
February 16 (afternoon),
February 22 (morning),
March 1 (morning),
March 5 (morning),
March 11 (morning),
March 12 (morning),
March 13 (morning),
March 14 (morning),
March 17 (afternoon), and
March 18.
The data was managed with Windsond Receiver Application Demo Version 2.92, (C) Sparv Embedded AB 2016.

en: Radiosond Sounding Files

en:
The "soundings" radiosond data contains information on ambient pressure (mbar), temperature (C), relative humidity (%), wind speed (m s‾ ¹) and wind direction (true deg), and are ordered with respect to the height above ground (m AGL) with a step size of 20 m. The first line of each file idicates the geographic location and the start time (in UTC) of the ascent. If the wind speed was zero, no wind direction is given.
The zip files contain ascents on the following days:
February 10 (morning and afternoon),
February 11 (morning),
February 16 (afternoon),
February 22 (morning),
March 1 (morning),
March 5 (morning),
March 11 (morning),
March 12 (morning),
March 13 (morning),
March 14 (morning),
March 17 (afternoon), and
March 18.
The data was managed with Windsond Receiver Application Demo Version 2.92, (C) Sparv Embedded AB 2016.

en: Radiosondes (Windsond, Sparv Embedded AB) were started in Davos Wolfgang (LON: 9.853594, LAT: 46.835577) to report height profiles of pressure, relative humidity and temperature at specific days. In addition to regular launches of radiosondes, sondes were attached to [HoloBalloon](https://www.envidat.ch/group/clouds-in-situ-raclets) to report the ambient conditions of the in-situ measurements. Further profiles of meteorological measures were recorded at [HoloGondel](https://www.envidat.ch/group/clouds-in-situ-raclets) which was installed at the gondola moving between Gotschnaboden and Gotschnagrat at 2285 m a.s.l.

holoballoon

display_name: holoballoon

pressure

display_name: pressure

raclets

display_name: raclets

radiosonde

display_name: radiosonde

relative-humidity

display_name: relative-humidity

temperature

display_name: temperature

wind

display_name: wind

wind-direction

display_name: wind-direction

en: Radiosondes


en: sankt-annafirn alps orthoimage dsm dem drone glacier findelengletscher gletscher orthophoto uav griesgletscher

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 15th of August 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 15th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 21th of July 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 3rd of August 2015.

en: This .pdf contains an orthoimage for each dataset as well as a Table which displays the number of flights made, image acquired, number of GCP set and the total area covered.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 19th of April 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of July 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 26th of September 2015.

en: Bulk Data Access

en: Link to the S3 bucket where all the data resources can be downloaded in bulk

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 15th of April 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Griesgletscher on the 13th of September 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 22th of September 2016.

en: This folder contains all UAV flights paths that we created for the Sankt Annafirn, the Findelengletscher and Griesgletscher. They have been created with the software eMotion2, that was developped for the eBee platform from Sensefly.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Sankt Annafirn on the 28th of September 2015.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 2nd of July 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 30th of August 2016.

en:
This .zip folder contains:

 - An orthoimage (oi) of 0.1m resolution

- A Digital Surface Model (dsm) of 0.1m resolution

- The Agisoft Photoscan automatic processing report

for the UAV field campaign conducted on the Findelengletscher on the 09th of April 2015.

en:
 UAV-derived DSMs and orthoimages

Unmanned Aerial Vehicle (UAV) surveys were conducted between 2015 and 2016 on the Sankt Annafirn, Findelen- and Griesgletscher, situated in the Swiss Alps. Three surveys at the Sankt Annafirn allowed for a full glacier coverage, four surveys at Griesgletscher allowed an almost full glacier coverage and seven surveys at Findelengletscher allowed for a partial coverage of the glacier tongue (see individual datasets for exact extent). For each survey, a high resolution orthoimage and a Digital Surface Model (DSM) was created.

 UAV surveys:

Prior flight, Ground Control Points (GCPs) were deployed on the glacier surface and measured with a differential GPS (Trimble R7 or Leica GPS 1200). They allowed precise georeferencing of the UAV-derived datasets. UAV flight plans were planned with the software *eMotion 2* and a SenseFly eBee was used as surveying platform. The images were then processed with the software Agisoft Photoscan Pro 1.1.6 .

The location and dates of each survey can be found in the table together with the number of flights performed (Nflights), the number of acquired images (Nimages), the number of GCPs set (NGCPs) and the surveyed area.

A folder for each dataset is available (see folder name in table), which contains:

- An orthoimage *glacier_date_photoscan_oi_CH1903+_LV95_0.1m.tif*

- A Digital Surface Model *glacier_date_photoscan_dsm_CH1903+_LV95_0.1m.tif*

- The Agisoft Photoscan automatic processing report  *glacier_date_photoscan_report.pdf*

where:

- *glacier* is the name of the surveyed glacier

- *date* is the date of the UAV image acquisition

- *photoscan* is the name of the photogrammetric software

- *oi* or *dsm* the type of dataset

- *CH1903+_LV95* is the coordinate system and datum of the dataset

- *0.1m* is the resolution of the dataset in meter

- *.tif* is the extention of the dataset

Details about the UAV surveys, the image processing and the accuracy of the UAV-derived products can be found in this publication below.

Paper Citation:
 > _Gindraux et al. 2017. Accuracy Assessment of Digital Surface Models from Unmanned Aerial Vehicles’Imagery on Glaciers, Remote Sensing, 9, 186, 1-15, [doi: 10.3390/rs9020186](https://doi.org/10.3390/rs9020186)._

The folder UAV_flight_paths.zip contains all UAV flights performed on the Sankt Annafirn, Findelengletscher and Griesgletscher. The flights were planned with the software eMotion2 and have the .afp extention.

alps

display_name: alps

dem

display_name: dem

drone

display_name: drone

dsm

display_name: dsm

findelengletscher

display_name: findelengletscher

glacier

display_name: glacier

gletscher

display_name: gletscher

griesgletscher

display_name: griesgletscher

orthoimage

display_name: orthoimage

orthophoto

display_name: orthophoto

sankt-annafirn

display_name: sankt-annafirn

uav

display_name: uav

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: UAV-derived Digital Surface Models and orthoimages for three alpine glaciers


en: snow metamorphism 18o advection stable-water-isotope

en: Data files and read-me

en: raw data and micro-CT data available from contacts

en: Read-me

en: A short description of the data contained in the zipped-file. Recommended for reading before downloading the dataset.

en:
Stable water isotopes (δ18O) obtained from snow and ice samples of polar regions are used to reconstruct past climate variability, but heat and mass transport processes can affect the isotopic composition. Here we present an experimental study on the effect on the snow isotopic composition by airflow through a snow pack in controlled laboratory conditions. The influence of isothermal and controlled temperature gradient conditions on the δ18O content in the snow and interstitial water vapor is elucidated. The observed disequilibrium between snow and vapor isotopes led to exchange of isotopes between snow and vapor under non-equilibrium processes, significantly changing the δ18O content of the snow. The type of metamorphism of the snow had a significant influence on this process.
Ebner, P. P., Steen-Larsen, H. C., Stenni, B., Schneebeli, M., and Steinfeld, A.: Experimental observation of transient δ18O interaction between snow and advective airflow under various temperature gradient conditions, The Cryosphere Discuss., https://doi.org/10.5194/tc-2017-16, accepted, 2017.

advection

display_name: advection

metamorphism

display_name: metamorphism

snow

display_name: snow

stable-water-isotope

display_name: stable-water-isotope

educ

en: Education, culture and sport

en: EnviDat: the Environmental Data Portal

en: Experiments on stable water isotopes,  snow metamorphism, and advection


en: metamorphism blowing-snow cold-lab drifting-snow experiments wind-tunnel water-isotopes snow-saltation

en: Meteorological variables measured inside the wind tunnel during the January 2023 experiments

en: The dataset contains the 1-minute averages of the calibrated meteorological variables: temperature (T, °C), relative humidity (RH, %), relative humidity referenced against saturation over ice (RHice, %), specific humidity (q, g/kg) and wind speed (WS, m/s) as measured in the observation section of the wind tunnel at different heights. The measurement heights correspond to: "Top"=42.5cm, "Mid"=30cm, "Bot"=15cm, "PT100_Ta"=3cm. "WS" was measured at 36.5cm height. The timestamp is in local time (UTC+1) and indicates the start of the averaging period.

en: Meteorological variables measured inside the wind tunnel during the May 2023 experiments

en: The dataset contains the 1-minute averages of the calibrated meteorological variables: temperature (T, °C), relative humidity (RH, %), relative humidity referenced against saturation over ice (RHice, %), specific humidity (q, g/kg) and wind speed (WS, m/s) as measured in the observation section of the wind tunnel at different heights and the room temperature of the laboratory measured outside the wind tunnel (Lab_Ta, °C). The measurement heights correspond to: "Top"=42.5cm, "Mid"=30cm, "Bot"=15cm, "PT100_Ta"=3cm. "WS" was measured at 36.5cm height. The time was synchronised to the concurrent CRDS measurements (which are UTC) and adjusted for the time lag resulting from pumping vapour from inside the wind tunnel to the CRDS. The timestamps indicate the beginning of the averaging period.

en: Snow samples - sphere size statistics files

en: The individual measurement reports of the microCT scan for each snow sample as combined zip file. The file names and the sample number indicate which snow sample it is, see "Snow samples - microCT measurements". Each file contains the statistics and the count of fitted sphere size diameters and the respective share (in-%) in the frequency distribution. Immediately after snow sampling, a small portion of snow was transferred to the cylindrical μCT sample holder with a diameter of 15 mm and analysed at -20°C using a Scanco® CT-40 scanner. The analysis followed Hildebrand and Rüegsegger (1997).

en:
The dataset contains the stable water isotopic composition (d18O, dD. d-excess) of the snow samples taken during the ring wind tunnel experiments in January and May 2023 at the SLF cold laboratory facilities in Davos. The snow samples were collected in air-tight WhirlPaks and kept frozen at -20°C until they were melted in the closed sampling bags, filtered and 1.8ml were transferred into a 2ml glass vial and shipped to the Paul Scherrer Institut in Villigen, Switzerland where they were analysed following established laboratory procedures. The combined uncertainty on the individual isotopic composition is <0.5‰ for dD and <0.1‰ for d18O which yields an uncertainty of 0.9‰ on d-excess.
Timestamps are given for local Davos time (LT) and synchronised to the CRDS instrument which is in UTC. The "ExpNo" column refers to the experiment numbers given in Wahl et al. (2024), Table 1. The "type" of the snow samples is: "ini" = initial snow before introduction to the wind tunnel, "airborne" = snow sampled out of the air, "acc_in" = inner part of accumulated snow, "acc_out" = outer surface layer of accumulated snow.

en: Wind tunnel water vapour isotopic composition

en: The water vapour and its calibrated isotopic composition sampled inside the wind tunnel at 46cm height during the experiments. The vapour was pumped through a heated copper tube at a rate of 0.2 l/min to the CRDS instrument located in a temperate room outside the cold laboratory. The data has 1 second resolution with the timestamp in UTC (CRDS reference time). The measured variables are the calibrated d18O (‰), dD (‰) and d-excess (‰) signals and the uncalibrated ("H2Oraw", ppmv) and calibrated ("H2Ocali",ppmv) humidity readings of the CRDS and converted to specific humidity ("spechum", g/kg). The isotope data was corrected for its humidity-isotope dependency and referenced against the VSMOW-SLAP scale. Calibration runs were performed daily and details can be found in Wahl et al. (2024) including the Supplementary Materials.

en: Snow samples - microCT measurements

en: The data of the snow samples that were analysed in a Scanco® CT-40 scanner using a sample holder of 15 mm diameter which allowed for a high-resolution analysis with voxel size of 8 μm. The timestamp (local time, Davos, Switzerland) of snow sampling is given as well as the type of snow sample (see Snow samples - stable water isotopic composition dataset), the corresponding wind tunnel experiment number ("ExpNo", Wahl et al. (2024), Table 1) and the time since the snow introduction to the wind tunnel. The measured SSA is given in units 1/mm. The column "hist_filename" lists the name of the corresponding .txt file which contains the sphere size statistics of the snow samples. The sphere size statistics files are compressed in a .zip file.

en: This dataset collection contains all datasets collected during the ring wind tunnel experiments in January and May 2023 at the SLF cold laboratory facilities in Davos. A full description of the experiment set-up can be found in Wahl et al. (2024). The collection contains data from 19 experiments. The dataset collection entails measurements of the stable water isotopic composition of snow samples and the water vapour inside the wind tunnel, measurements of the meteorological variables inside the wind tunnel and snow sample properties as measured with microCT measurements (sphere size distribution and specific surface area (SSA)).

blowing-snow

display_name: blowing-snow

cold-lab

display_name: cold-lab

drifting-snow

display_name: drifting-snow

experiments

display_name: experiments

snow-saltation

display_name: snow-saltation

water-isotopes

display_name: water-isotopes

wind-tunnel

display_name: wind-tunnel

en: Ring wind tunnel experiments - airborne snow metamorphism and stable water isotopes


maintainer: Tessa Hegetschweiler

en: recreational-activities teenagers forest adolescents childhood

en: Dataset comments

en: The codebook to the dataset

en: Questionnaire school survey

en: The questionnaire used in the survey at 8 schools aimed at teenagers in German.

en: Survey at schools 2017

en: The dataset of the questionnaire survey at schools in SPSS-format.

en: Dataset survey at schools

en: The dataset of the questionnaire survey at schools in excel format.

en: The data results from a questionnaire survey conducted at 8 schools in the cantons Zurich, Aargau and St. Gallen. Respondents aged 13-22 years. The aim of the survey was to gain insight into teenagers' relationship to the forest, reasons for visiting or not visiting the forest and activities in the forest.

adolescents

display_name: adolescents

childhood

display_name: childhood

forest

display_name: forest

recreational-activities

display_name: recreational-activities

teenagers

display_name: teenagers

educ

en: Education, culture and sport

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Factors influencing teenagers' forest visit frequency


maintainer: Giulia Francesca Azzurra Donati

en: urban-planning ecosystem-services network-analysis biodiversity circuit-theory ecological-corridors

en: Amphibian movement resistance layers and scripts for connectivity modelling - part 2

en: The zipped folder includes the script to create and analyse the networks from Circuitscape outputs. The subfolders “Boundaries”, “Layers”, and “Reference_net” contain files either called by the code or created in the process. The subfolder “Outputs_from_Circuitscape” contains the outputs from Circuitscape including node and branch cumulative currents in a network format.

en: Amphibian movement resistance layers and scripts for connectivity modeling - part 1

en: The zipped folder includes the script to aggregate the resistance layers into squared and hexagonal grids. The subfolders “Boundaries”, “Layers”, “Reference_grids”, and “Resistance_from_SDMs” contain files either called by the code or created in the process.The subfolder “Inputs_for_Circuitscape” contains the inputs to run Circuitscape, after doing some subsequent processing steps in QGIS (listed in the R script) with the files created with the script.

en: This data includes (1) Scripts to aggregate landscape resistance layers into squared and hexagonal grids (i.e., different representations and resolutions), (2) Input resistance layers and focal nodes in .txt format to run in Circuitscape (Python implementation v4.0.5). Circuitscape is a software tool for modeling and analyzing landscape connectivity, which simulates movement of organisms across landscapes by estimating resistance to movement across each point of the landscape. (3) Scripts for the ecological network analysis, and (4) environmental predictors for amphibian whole-life cycle habitats used to describe the local environment for BGI design (i.e. topographic, hydrologic, edaphic, vegetation, land-use derived, movement-ecology related).

biodiversity

display_name: biodiversity

circuit-theory

display_name: circuit-theory

ecological-corridors

display_name: ecological-corridors

ecosystem-services

display_name: ecosystem-services

network-analysis

display_name: network-analysis

urban-planning

display_name: urban-planning

en: EnviDat: the Environmental Data Portal

en: Multi-Scale Prioritization framework for Urban Blue-Green Infrastructure Planning to Support Biodiversity: Data & Codes


photogrammetric-drone-data-schurlialp

maintainer: Yves Bühler

title_for_slug: photogrammetric-drone-data-schurlialp

en: uav drone-data photogrammetry wingtra orthophoto dsm

en: Data Access

en:
- 10 cm DSM
- 10 cm HS
- 3 cm orthophoto
- original RGB images
- Agisoft Metashape Processing Report

All of the products are also available as a cloud optimized geotiff.

en: The data was collected on 16.04.2021 and on 28.05.2021 with a Wingtra Gen II and a Sony RX1 II RGB sensor to obtain snow depth and distribution data. Following the data collection, the data was processed with Agisoft Metashape. A 10cm DSM, a 10cm snow depth raster, a 3mm orthophoto and the original drone images are available for download.

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

uav

display_name: uav

wingtra

display_name: wingtra

en: Photogrammetric Drone Data Schürlialp


maintainer: Amelie Fees

en: time-lapse-photography glide-snow-avalanche avalanche avalanche-activity snowpack-simulation

en: SNOWPACK simulations

en: SNOWPACK simulations (.pro and .smet) covering season 2008/09 to 2021/22 at 10 virtual locations on Dorfberg. The locations correspond to the most common glide-snow avalanche paths.

en: Glide-snow avalanche activity

en: Table that contains all glide-snow avalanche events that were detected in time-lapse photographs (season 2008/09 to 2021/22). The columns are explained in the README.txt

en: Glide distances for opening glide-cracks

en: This folder contains all glide-cracks where glide-distances were extracted from time-lapse photographs. Glide-distances were calculated in x-direction (width) and y-direction (downslope, length) by georeferencing the images.

en: README

en: README.txt explaining the dataset and columns of tables in more detail.

en:
This dataset includes the processed data of the glide-snow avalanche activity and dynamics on Dorfberg (Davos, Switzerland) covering seasons 2008/09 to 2021/22. This dataset was described in the research article:

Fees, A., van Herwijnen A., Altenbach, M., Lombardo, M., Schweizer, J.: Glide-snow avalanche characteristics at different time-scales extracted from time-lapse photography, Annals of Glaciology, 91

We extracted the dynamics of opening glide-cracks and the glide-snow avalanche activity from time-lapse photographs. Glide-snow avalanches were separated into surface and interface events using the liquid water content which was simulated with SNOWPACK at 10 virtual stations on Dorfberg.

avalanche

display_name: avalanche

avalanche-activity

display_name: avalanche-activity

glide-snow-avalanche

display_name: glide-snow-avalanche

snowpack-simulation

display_name: snowpack-simulation

time-lapse-photography

display_name: time-lapse-photography

en: Glide-snow avalanche activity on Dorfberg, Davos, Switzerland


data-broedlin-cnp

title_for_slug: data-broedlin-cnp

en: soil phosphorus forest dissolved-organic-matter mineralization nitrogen carbon stoichiometry drying-rewetting

en: Data Broedlin-CNP

en: Data Broedlin-CNP-Release

en: Raw data of C-N-P mobilization experiment from Oi, Oe/Oa, and A horizons of beech forest soils along a nutrient availability gradient.

en: Mircocosm experiment to identify the individual patterns and controls of C, N, and P mobilization in soils under beech forests. Organic and mineral horizons sampled along a nutrient availability gradient in Germany were exposed to either permanent moist conditions or to dry spells in microcosms and quantified the release of inorganic and organic C, N, and P.

carbon

display_name: carbon

dissolved-organic-matter

display_name: dissolved-organic-matter

drying-rewetting

display_name: drying-rewetting

forest

display_name: forest

mineralization

display_name: mineralization

nitrogen

display_name: nitrogen

phosphorus

display_name: phosphorus

soil

display_name: soil

stoichiometry

display_name: stoichiometry

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data Broedlin CNP


en: patchy-snow-covers riegl-vz6000 tls terrestrial-laser-scanning snow-ablation-rates

en: Snowmask 2014

en: Digital Elevation Modell 2016

en: Gletschboden test site

en: Snowmask 2016

en: Digital Elevation Modell 2014

en: Snowmask 2015

en: Digital Elevation Modell 2015

en: We recorded snow ablation maps with a terrestrial laser scanner (TLS, Riegl-VZ6000) at the Gletschboden area. The TLS position is located approximately 30 vertical meters above the Gletschboden area at a northerly exposed slope. In total 44 TLS measurement sets have been conducted in three consecutive years 2014-2016 (2014: 13 measurements; 2015: 17 measurements; 2016: 14 measurements). The TLS system has a single-point measurement frequency of 300 kHz and a beam divergence of 0.007°. This set-up allows a horizontal resolution of approximately 0.01 m in 100 m distance to the TLS position. One scan of the Gletschboden area lasts approximately 15 minutes. The travel time from the laser scanner towards the surface is recorded and afterwards converted into a point cloud of distances. 5 reflectors located at the Gletschboden area and in the closer surroundings were additionally scanned during each measurement to transform the point cloud from the scanner own coordinate system into Swiss coordinates. Additionally, orthophotos have been created by using pictures recorded from the TLS in order to provide snow mask maps. Snow and bare ground can be distinguished by the RGB color information of the orthophoto. Cells with blue band information greater than 175 were categorized as snow and all cells with values smaller or equal 175 were categorized as bare ground.

patchy-snow-covers

display_name: patchy-snow-covers

snow-ablation-rates

display_name: snow-ablation-rates

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

tls

display_name: tls

en: DISCHMEX - High-resolution daily snow ablation rates in an Alpine environment


causal-effect-of-mfoz

title_for_slug: causal-effect-of-mfoz

en: propensity-score-matching the-major-function-oriented-zone causality built-up-land-change selection-bias fujian-province

en: Data and Stata code for repeating the results

en:
Data.xlsx is the variables of 952 townships
Table 1-2 NN(1-1)_noreplace_caliper(0.01).do is STATA code to produce the results in Table 1 and 2
Figure 5 Distribution of the propensity scores.R is R code rto produce Figure 5
Figure 5 Standard mean difference.R is R code rto produce Figure 5

en:
Title: Closer to causality: How effective is spatial planning in governing built-up land expansion in Fujian Province, China?

Research objective: The Major Function Oriented Zone (MFOZ), the first strategic spatial plan in China, is developed to achieve a coordinated regional development, through spatial regulation and zoning of development. The MFOZ he MFOZ divided land into four major function-oriented zones: The development-optimized zone, the development-prioritised zone, the development-restricted zone, and the development-prohibited zone. We used propensity score marching to evaluate the effect of the MFOZ on built-up land expansion in Fujian Province over three time intervals (2013–2015, 2013–2018 and 2013–2020).

Data: Data.xlsx contains the variables of 954 towns in Fujian Province.
Town_ID is the town unique ID;
County_ID is the county unique ID;
City_ID is the city unique ID;
MFOZ is the the development-prioritised zone and the development-restricted zone (The development-optimized zone and the development-prohibited zone are excluded);
Builtup_13_15 is the built-up land expansion from 2013 to 2015;
Builtup_13_18 is the built-up land expansion from 2013 to 2018;
Builtup_13_20 is the built-up land expansion from 2013 to 2020;
Dis2water is the Euclidean distance from the town to the nearest waterbody;
Slope is the the average slope within the town;
GDP is the average GDP in 2010 within the town;
Pop is the average population in 2010 within the town;
Road is the average population in 2010 within the town;
Dis2city is the Euclidean distance from the town to the nearest prefectural city centre;
Nei_Arable, Nei_Forest, and Nei_Built.up are the area of arable land, forest land, and built-up land neighbouring town i in 2010.

Method: we used the propensity score matching to compare the changes in the amount of built-up land in the towns of the development-prioritised zone with the matched towns of the development-restricted zone. Additionally, we used three evaluation intervals (2013–2015, 2013–2018 and 2013–2020) to evaluate temporal variation in the causal effect of the MFOZ on built-up land expansion.

built-up-land-change

display_name: built-up-land-change

causality

display_name: causality

fujian-province

display_name: fujian-province

propensity-score-matching

display_name: propensity-score-matching

selection-bias

display_name: selection-bias

the-major-function-oriented-zone

display_name: the-major-function-oriented-zone

en: Causal effect of MFOZ


maintainer: Roksolana Petrovska

en: regeneration lar shade-tolerance dominance fagus mortality-rate acer

en: The R-script of survival analysis for accelerated failure time model

en: Mortality of regeneration

en: Acer platanoides, Acer pseudoplatanus and Fagus sylvatica living and dead juveniles (0-500 cm in height) grown in the deep shade of a prime beech-dominated forest.

en:
 One individual per species, vitality class (low and high) and height class (eight classes: 0–10, 11–20, 21–35, 36–60, 61–90, 91–130, 131–200 and 201–500 cm) was randomly selected and harvested in each of the six plots. This resulted in a sample of 82, 80 and 89 living individuals of A. platanoides, A. pseudoplatanus and F. sylvatica, respectively.

 Additionally stems of dead Acer spp. and F. sylvatica trees that had died within the last three years (2015–2018) were randomly harvested, matching the height classes of the harvested living trees wherever possible. In total, 179 dead young trees (60 A. platanoides, 72 A. pseudoplatanus and 47 F. sylvatica) were collected.

 Variables:
* species_code: a_pla - Acer platanoides, a_pse - Acer pseudoplatanus, f_syl - Fagus sylvatica
* species: as above
* dummy: 0 - living individual, 1 - dead individual
* LAR_cm2_g: leaf area ratio or ratio of leaf area to total plant biomass, [cm2/g]
* tree_age: in years
* avg_ring_micron: average width of the last 5 rings in tree life excluding the last ring
* dry_mass_g: aboveground and belowground biomass
* DLI: direct light index (measured only under living individuals)
* BLI: diffuse light index (measured only under living individuals)
* GLI: global light index

acer

display_name: acer

dominance

display_name: dominance

fagus

display_name: fagus

lar

display_name: lar

mortality-rate

display_name: mortality-rate

regeneration

display_name: regeneration

shade-tolerance

display_name: shade-tolerance

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Mortality of regeneration: Acer spp. and Fagus sylvatica