en: landscape-ecology landscape-perception european-landscape-convention landscape ecosystem-services

en:
This indicator shows the state of vegetation within urban areas in Switzerland. On the one hand, the entire vegetation period is considered, taking into account all data from mid-May to mid-September. On the other hand, an additional analysis focuses on the spring period from mid-May to the end of June in order to observe only the growing season, which in the vast majority of cases is not yet affected by drought stress.
The remote sensing data used to calculate this indicator come from Sentinel-2 MSI and cover the whole of Switzerland. Sentinel-2 is a wide-area, high-resolution, multispectral imaging mission of ESA for monitoring vegetation, soil and water cover. Sentinel-2 Level-1C data were used, which are radiometrically and geometrically corrected top-of-atmosphere products. The corrections include orthorectification and spatial registration on a global reference system (combined UTM projection and WGS84 ellipsoid) with sub-pixel accuracy. Level 1C images are delivered in tiles of 100×100 km. A total of 11 tiles are required to cover the extent of Switzerland.

en: The degree of imperviousness indicates the sealed surface area as a percentage. The LABES indicator 7 is surveyed with the area statistics Switzerland. The survey interval of the areal statistics is 12 years for the first 3 surveys and 9 years for the fourth survey of the areal statistics; therefore, short-term developments in the change of the sealed surface cannot be recorded.

en:
Remoteness implies distance from a reference. In the case of an actual journey through a remote landscape, this distance can mean the physical distance from society or from signs of civilisation. In solitude, individuals face the elements of nature and thus move a step away from the backing of security provided by civilised society.
To calculate the remoteness of each grid cell per time period, the "Path Distance" ArcGIS tool is used. This calculates the cost between each grid cell and the settlement areas (pixels with >15 people) as the shortest trajectory. The surface distance is calculated from the horizontal and vertical distance (including the digital elevation model DHM25) and a cost grid, which assigns to each cell the costs incurred when passing through this area. As soon as the trajectory meets (or starts on) a road on which the settlement can be reached, the journey time by public transport or by private means of transport is calculated and the shorter of the two journey times is used.

en: This indicator quantitatively describes land consumption for settlement and the change in Switzerland's settlement area based on data from Switzerland's land use statistics (Swiss Federal Statistical Office FSO).

en: This indicator measures the average number of different uses of agricultural land in Switzerland. It is thus a measure of the diversity of agricultural land. The agricultural structure survey is used to record the diversity of use.

en: For many people, "untouched landscape" is the very essence of nature. There are hardly any places left in Switzerland that have no human influence. But you can find regions where human influence is not so obvious. These are areas where no human buildings and installations can be seen. Areas free of facilities are therefore the most natural areas that can be found in Switzerland.

en: This indicator shows the situation of wind energy in Switzerland. Firstly, we locate the current wind turbines and wind farms in Switzerland and compare their location with the wind speed map and the federal government's base map concerning the main wind potential areas. Secondly, we analyse the development of wind energy in Switzerland over the years and the efficiency of such structures.

en: Indicator 31a describes the accessibility of water bodies in Switzerland. Water bodies are popular recreational areas. In order to be used by the population, therefore they should be freely accessible.

en: Areas left to nature are areas in which natural processes can take place essentially undisturbed and direct human influences determine the (current) development only to a small extent. In such areas, the composition of animal and plant communities differs from that in the cultivated landscape. The areas left to nature in Switzerland can be divided into "wilderness areas" in the forest (forest wilderness), areas left to nature in the high mountains (alpine fallow) and areas along water bodies (floodplains). The areas may or may not be accessible. Of central importance is the intensity of human activities.

en: Indicator 2 describes the quantitative change in Switzerland's agricultural area excluding summer pastures. It contributes to assessing the basic agricultural use, which is very important for the landscape. This has a significant impact on the character of the landscape and on biodiversity.

en: Indicator 1 quantitatively describes the forest area of Switzerland and its change. The required data on forest area are calculated using the area statistics (Swiss Federal Statistical Office, SFSO).

en:
The social indicators for LABES were collected with a Swiss-wide representative survey. The first survey was conducted in 2011 (n = 2814 participants), the second in 2020 (n = 2090 participants). The “Auswertungsprotokolle” inform about the results of each indicator in 2020 and compared to the state of 2011.
Indicator list:
Indicator 23 Ortsbindung / place attachment
Indicator 24 Landschaftliche Schönheit / visual landscape quality or beauty
Indicator 25 Besonderheit (Eigenart und Vergangenheitsbezug)/ place identity
Indicator 27 Wahrgenommener Informationsgehalt der Landschaft: Komplexität, Entdeckungspotenzial, Kohärenz, Lesbarkeit / Kaplans’ preference matrix: complexity, mystery, coherence, legibility

Indicator 29 Faszination / soft fascination
Indicator 30 Authentizität /authenticity
Indicator Neu_16 Erholung und Landschaft (Erholungsindex, Zugang, Outdoorsport) / recreation and landscapes (recreationindex, access, outdoor sports)
Indicator Neu_17 Beobachtete Landschaftscharakterisierung / perceived landscape charachterization
Indicator Neu_18 Beobachtete Landschaftsveränderungen / perceived landscape changes
Indicator Neu_20 Wahrgenommene Landschaftsqualität in den Grundnutzungen oder Texturen (Wald, Landwirtschaft, Siedlungsflächen, Gewässer)/ Perceived landscape quality in the different land use areas (forest, agriculture, settlement areas, water bodies)
Indicator Neu_22 Gesamturteil zur wahrgenommenen Landschaftsqualität / overall satisfaction
Indicator Neu_23 Kulturelle Landschafswerte / cultural values and services of the landscape

en: This is the general readme for all LABES datasets.

en: As a metric for characterising urban sprawl, the measure of urban sprawl (Z or weighted urban permeation WUP) was first propagated by Jaeger et al. (2008). We use this measure here. Urban sprawl is expressed in DSE/m2. The metric was refined within the framework of the National Research Programme 54 "Sustainable settlement and infrastructure development" in the project "Landscape sprawl Switzerland - Quantitative analysis 1935 to 2002 and implications for spatial planning" (Jaeger et al. 2008).

en: Indicator 8 quantitatively describes the Euclidean distance from each point of a 12.5x12.5m grid outside the building zone to the nearest building. This is a revision based on a new calculation method.

en: This indicator shows the agricultural intensity in Switzerland using satellite data by calculating the NDVI values for each growing season and, in particular, observing the standard deviation of these values over the years. The remote sensing data used to calculate this indicator come from Sentinel-2 MSI and cover the whole of Switzerland. Sentinel-2 is a wide-area, high-resolution, multispectral imaging mission of ESA for monitoring vegetation, soil and water cover. Sentinel-2 Level-1C data were used, which are radiometrically and geometrically corrected top-of-atmosphere products. The corrections include orthorectification and spatial registration on a global reference system (combined UTM projection and WGS84 ellipsoid) with sub-pixel accuracy. Level 1C images are delivered in tiles of 100×100 km. A total of 11 tiles are needed to cover the extent of Switzerland.

en: Indicator 35 describes the accessibility with footpaths and hiking trails less than 2m wide. The basis for this is the Topographic Landscape Model (TLM and TLM3D) of the Federal Office of Topography. The data are given in km/km2 and are broken down by land use. The land use categories settlement, forest and open land are extracted from the area statistics of the Federal Statistical Office. Contrary to the initial calculation in 2015, we have abandoned the official attribute "hiking trail", as it has been shown that official "hiking trails" are also routed over longer distances along major roads. The current definition has to do solely with the width of the path (max. width 2m) and not with the official designation. This is closer to the quality of a trail than the official designation "hiking trail".

en: Indicator 11a describes the change in the length of watercourses in Switzerland between different points in time. The changes are systematically recorded on the basis of the changes in the national maps 1:25,000, later Vector25 and from about 2012 using TLM3D. With this evaluation protocol (2022), the sampling procedure of "Landschaft unter Druck" is used for the last time. It consists of 152 sampling rectangles in which the changes are recorded and extrapolated to the whole of Switzerland. From TLM3D (2020) onwards, the extrapolation is guaranteed for the entire area of Switzerland.

en: Light emissions in 500m resolution for entire Switzerland for the periode 2014-2020 using VIIRS-VCSML

en: Transport infrastructure such as highways, connecting roads and railroads, as well as settlement areas divide a landscape into individual areas separated from each other. To measure the degree of landscape fragmentation, the metric of "effective mesh size" (meff) was used (Jaeger 2000). It expresses the probability that there are no separating elements, such as traffic routes or settlements, between two randomly selected points. The more separating elements cut up the landscape, the lower this probability and the smaller the effective mesh size.

en: Summer pastures make up the majority of extensively used agricultural land in Switzerland. Summer pastures are located at altitudes that do not allow intensive use of the land, as is the case in the Central Plateau. Fertiliser use is either non-existent or limited. The indicator helps to measure changes in a basic agricultural use that is very important for the mountain landscape. It is a major determinant of landscape character and biodiversity.

en: Indicator 4 describes the length and area of roads and railroads for the year 2020, as well as the changes between different points in time. The calculation of length and area consumption is based on the Topographic Landscape Model TLM and TLM3D of the Federal Office of Topography. Before 2014, changes were recorded in a sampling procedure based on landscape elements and extrapolated to subspaces and the whole of Switzerland. Since 2015, however, it has been possible to use data directly for the whole of Switzerland.

en: This indicator shows the status of transmission lines in Switzerland and analyses the land cover on which these infrastructures are built. Transmission lines are assessed on the basis of TLM data. An extract from TLM_VERSORGUNGSBAUTE (OBJEKTART: Hochspannungsleitungen) is used to calculate the length consumption. In addition, the area statistics layer (NOLC04) is used to differentiate land types into different categories. The total length of transmission lines in Switzerland, in the different biogeographical regions and in the different cantons is calculated by overlay operations for year 2015 and year 2020 (see appendices for further details).

en:
The Swiss Landscape Monitoring Program (LABES) records both the physical and the perceived quality of the landscape with about 30 indicators. The surveys of the physical aspects are largely based on evaluations of data available throughout Switzerland from swisstopo and the Federal Statistical Office (FSO). Another significant part of the data comes from a nationwide population survey on landscape perception.
This dataset describes data that have been assembled in the 2020 update of the Swiss Landscape Monitoring Program LABES.

ecosystem-services

display_name: ecosystem-services

european-landscape-convention

display_name: european-landscape-convention

landscape

display_name: landscape

landscape-ecology

display_name: landscape-ecology

landscape-perception

display_name: landscape-perception

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: LABES 2 Indicators of the Swiss Landscape Monitoring Program


maintainer: Marco Moretti

en: protected-areas community-indices functional-diversity biodiversity elevation-gradient switzerland predictive-modelling climate hymenoptera anthophila beta-diversity wild-bee resource-availability urbanization

state: active

type: dataset

en: Wild bee trait data

en: Text file containing the scores of the 8 used traits. The data originates from the European trait database (compiler: Stuart Roberts; pollinator loss module of the EU- FP6 ALARM project).

format: SERVICE

en: Spatial environmental predictors and responses

en:
The .zip file contains the rasters of the environmental predictors and the predicted responses:
-  **Environmental predictors.**:
  -  The raster on the climate contains the PCA axes on the CHELSA variables.
  -  The raster on resource availability contains the PCA axes on plant communities
  -  The raster on land-use contains the land-use composition at 2500 m.
  -  The raster on beekeeping intensity contains thedensity of hives within 2500 m
-  **Responses**:
- The predicted responses (alpha and beta taxonomic and functional metrics and the traits) without masking the waterbodies, used in the analyses (Diversity_stack_revised_Selected_descriptors.tif). It contains a stack of 20 responses in this order: "belowgound", "cleptoparasite","FDis", "feeding_specialization", "FEve", "FRic", "InvSimpson", "ITD","LCBD_fun" ,"LCBD_taxo","phenoduration", "phenostart", "Rao", "Richness", "Shannon", "Simpson","solitary", "TED", "tong_length", "TOP". "FEve", "FRic", "InvSimpson","Rao", "Simpson" were not included in the linked paper.
- The predicted responses (alpha and beta taxonomic and functional metrics and the traits) masking the waterbodies (masked.stack.all.diversity.tiff). It includes a stack of 15 responses (excludes "FEve", "FRic", "InvSimpson","Rao", "Simpson").

en: Taxonomic and functional metrics in the community plots

en:
Response data used for the modeling.
Lat: latitude community plot
Lon: longitude community plot
Richness: species richness
Shannon: Shannon diversity index
FDis: functional dispersion
TOP: Trait Onion Peeling (functional richness)
TED: Trait Even Distribution (functional evenness)
LCBD_taxo: local community contributions to taxonomic beta diversity
LCBD_fun: local community contributions to functional beta diversity
ITD: community weighted means inter-tegula distance
feeding_specialization: community weighted means feeding specialization
tong_length: community weighted means tongue length
phenostart: community weighted means start of the phenology
phenoduration: community weighted means duration of the phenoloy
cleptoparasite: community weighted means cleptoparasites
belowgound: community weighted means proportion belowground
solitary: community weighted means proportion solitary

en: Deprecated-Predictors

en:
The compress file includes the rster files of the predictors used in the analyses, including the climate, resource availability, land-use and beekeeping intensity metrics.

The raster on the climate contains the PCA axes on the CHELSA variables.
The raster on resource availability contains the PCA axes on plant communities
The raster on land-use contains the land-use composition at 2500 m.
The raster on beekeeping intensity contains thedensity of hives within 2500 m

en: Elevation and waterbodies

en: Zip file containing two rasters: the digital elevation model of Switzerland and the waterbodies of Switzerland.

en: Protected areas

en: Protected areas considered, divided in three groups and rasters: protected areas sensu stricto, protected areas sensu lato and all protected areas

en: Variable importance, model evaluation, partial dependence plots

en: The compress file containes a set of txt files with the variable importance, the model evaluation metrics and the partial dependence plots of each of the responses used (alpha and beta taxonomic and functional diversity metrics; community weighted means of 8 functional traits)

en:
Raw data supporting the paper "Countrywide wild bee taxonomic and functional diversity reveal a spatial mismatch between alpha and beta-diversity facets across multiple ecological gradients". It contains taxonomic and functional metrics in 3343 community-plots distributed across Switzerland. The calculated metrics are:
- Alpha taxonomic community metrics: species richness and Shannon diversity
- Alpha functional community metrics: Functional richness (using the Trait Onion Peeling index, TOP), functional eveness (using the Trait Even Distribution index, TED) and the functional dispersion.
- Community weighted means of 8 functional traits
- The local community contributions on the functional and taxonomic beta diversity (LCBD).

The dataset also includes the following:
- The used predictors to model the spatial distribution of the community metrics (climate PCA, vegetation PCA, land-use metrics, beekeeping intensity).
-The three types of protected areas, defined according to the protective measures.
- The model evaluation, variable importance and partial dependece data.

anthophila

display_name: anthophila

beta-diversity

display_name: beta-diversity

biodiversity

display_name: biodiversity

climate

display_name: climate

community-indices

display_name: community-indices

elevation-gradient

display_name: elevation-gradient

functional-diversity

display_name: functional-diversity

hymenoptera

display_name: hymenoptera

predictive-modelling

display_name: predictive-modelling

protected-areas

display_name: protected-areas

resource-availability

display_name: resource-availability

switzerland

display_name: switzerland

urbanization

display_name: urbanization

wild-bee

display_name: wild-bee

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Data on wild bee taxonomic and functional diversity in Switzerland


en: evapotranspiration snow-simulation clm5 land-cover oshd land-use forest-productivity high-resolution snow

media_type: application/zip

en: Point-scale CLM5 simulation output of snow depth and snow water equivalent for 9 different simulation scenarios, each performed at 36 snow station locations across Switzerland. Please have a look at table A1 in the appendix of the linked publication for coordinates of the stations. Additional information on the setup, and the differences between simulation setups can also be found in the linked publication.

format: ZIP

en:
12 gridded CLM5 simulations over the spatial extent of Switzerland:
- 1km, 0.25deg, 0.5deg
- 3 different meteorological forcings (Clim_CRU, CLIM_CRU*, CLIM_OSHD)
- 2 different land use forcings
each with the following outputs:
- daily snow depth (file SNOW_DEPTH.nc)
- monthly summed gross primary production (file FPSN_MONTH_SUM.nc)
- monthly summed evapotranspiration (file QFLX_EVAP_TOT_MONTH_SUM.nc).
Temporal extent of all simulations: 01/01/2015 - 31/12/2020.

en: Forcing land surface datasets used for the CLM5 simulations at 1km, 0.25° and 0.5° resolution. For the 1km resolution both the standard global (LU_Gl) and the high-resolution dataset (LU_HR) are provided.

en:
This dataset contains Community Land Model 5 (CLM5) simulation output over the spatial extent of Switzerland at different resolutions and based on a range of input datasets. It further contains land-use surface data used for the CLM5-simulations.

**Detailed description of the CLM5 simulation setup and the various input datasets can be found in the accompanying publication: https://doi.org/10.5194/egusphere-2023-1832.**

 CLM5 simulation output

This dataset includes gridded CLM5 simulations of snow depth, gross primary productivity (GPP) and evapotranspiration at different resolutions ( 1km, 0.25° and 0.5°) and based on a range of input datasets over the spatial extent of Switzerland (see folder *gridded_CLM5_simulations*). Additionally, point-scale CLM5 simulations of snow depth and snow-water-equivalent at 36 snow-station locations (see folder *point_scale_CLM5_simulations*) are included. Latitude, longitude and elevation for these station locations can be found in table A1 of the above-mentioned publication. All simulation output spans from 01/01/2015 - 31/12/2019.

Included CLM5 simulation results are based on 3 different meteorological forcing datasets:
* Clim_CRU: standard global dataset, we used the recent state-of-the-art standrd global dataset CRU-JRA (https://catalogue.ceda.ac.uk/uuid/aed8e269513f446fb1b5d2512bb387ad)

* Clim_CRU*: ClimCRU upraded by downscaling temperature data using a temperature lapse rate of -6.5K/1000m and a high-resolution DEM

* Clim_OSHD: highest level of detail, meteorological forcing generated according to methods developed by the Operational Snow Hydrological Service (OSHD), at 1km spatial and 1hour temporal resolution</li>

 Land-use surface data

This dataset further includes forcing land surface datasets used for the CLM5 simulations at 1km, 0.25° and 0.5° resolution (see folder *surface_landuse_datasets*). For the 1km resolution both the standard global (LU_Gl) and the high-resolution dataset (LU_HR), which includes a higher level of detail and is based on a more up-to-date land use datase, are provided. More details on these two datasets can be found in the above-mentioned publication.

evapotranspiration

display_name: evapotranspiration

forest-productivity

display_name: forest-productivity

high-resolution

display_name: high-resolution

land-cover

display_name: land-cover

land-use

display_name: land-use

oshd

display_name: oshd

snow

display_name: snow

snow-simulation

display_name: snow-simulation

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Multi-resolution CLM5 simulations across Switzerland


maintainer: EnviDat Support

en: microct specific-surface-area snow icecube intercomparison

en: Influence of black carbon on the measurement of the specific surface of snow with the near infrared method - Philipp Baumann

en: These experiments investigate different possible errors by measuring the specific surface area (SSA) of snow with the near infrared method. The influence of black carbon on this measurement was disproved, the theory was therefore validated. It shows that sunlight has no influence on the measurement with the IceCube. Wind drift snow as thin layer on the sample can increase the measured value of the specific surface by a few percent. This could be part of the error, observed in former measurements at SLF. As reference for the measured SSA values with the near infrared method, computer tomography was used to verify the SSA values.

en: TARTES simulations

en: Jupyter notebook with TARTES simulations.

en: Statistics of samples

format: XLS

en: IceCube and MicroCT data

en: The file contains all micro-CT and IC measurements for snow types A, B, C, D and E used in our study. All samples were processed (and stored) in a cold laboratory at -15°C.

en: artificial_snow_data set

en: The file contains all micro-CT and IC measurements of the artificial snow data set. The data set was originally produced to investigate the influence of black carbon on SSA measurements.

en: SMP measurement files for snow types A, B, C and D.

en: Grain survey of snow particles

en: The file contains all measurements of the artificial particles for snow types A, B, C, D and E, including the artificial particle mass in the Petri dish.

en: The file contains all data for the plot in figure 1 of the co-located density and SSA measurement at Summit, Greenland in May 2015, conducted by Schneebeli, Proksch, Schmid.

en: The specific surface area (SSA) of different snow types were measured with the IceCube instrument and the Scanco Medical microCT 40. In addition, the snow particles created during the preparation of IceCube samples were counted. The difference in SSA between these instruments is explained by the formation of the surface particles. A numerical simulation using TARTES simulation support the observations.

icecube

display_name: icecube

intercomparison

display_name: intercomparison

microct

display_name: microct

specific-surface-area

display_name: specific-surface-area


maintainer: Jana von Freyberg

en: stable-water-isotope alptal hydrology catchment precipitation stream-water

en:
Version 2 of the dataset contains additional information on:
- line-conditioned (lc) excess
- precipitation sample volumes
- isotope data quality

media_type: application/pdf

format: PDF

en: Data Set Documentation: alptal_Isotopes_daily_2015-2019_v2

en: Documentations contains meta data of the data columns and information about the study catchments.

media_type: text/plain

en: Single comma-separated txt-file with daily data of stable water isotopes measured in streamwater and precipitation in the Swiss Alptal catchment and two of its tributaries (Erlenbach and Vogelbach), as well as daily data of key hydrometeorological variables from the Alptal valley

format: TXT

en: This dataset contains four years of daily measurements of the natural isotopic composition (2H, 18O) of precipitation and stream water at the Alp catchment (area 47 km2) in Central Switzerland and two of its tributaries (0.73 km2 and 1.55 km2). In addition, the dataset contains daily measurements of key hydrometeorological variables.

alptal

display_name: alptal

catchment

display_name: catchment

hydrology

display_name: hydrology

precipitation

display_name: precipitation

stable-water-isotope

display_name: stable-water-isotope

stream-water

display_name: stream-water

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Four years of daily stable water isotope data in stream water and precipitation from three Swiss catchments


en: drifting-snow antarctica terrestrial-laser-scanning meteorological-data snowmicropen mass-flux

en: README

en: Describes the dataset in detail

mimetype: text/plain

en: Dataset

en: Links to the dataset

en:
This dataset contains the data acquired during the expedition to Princess Elisabeth Antarctica Station in December 2016 and January 2017. The dataset consits of meterorological data, drifting snow mass flux data, SnowMicroPen data and Terrestrial Laser Scanning data.

Please refer to the README for more information about the data.

This dataset is the basis of the following publication:

Sommer, C. G., Wever, N., Fierz, C., and Lehning, M.: Wind-packing of snow in Antarctica, The Cryosphere Discuss., https://doi.org/10.5194/tc-2018-36, in review, 2018.

antarctica

display_name: antarctica

drifting-snow

display_name: drifting-snow

mass-flux

display_name: mass-flux

meteorological-data

display_name: meteorological-data

snowmicropen

display_name: snowmicropen

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

en: Expedition to Princess Elisabeth Antarctica Station, 2016/2017


maintainer: Leonie Schönbeck

en: vpd fluorescence acclimation gas-exchange photosynthesis drought pinus-sylvestris

en: Variable names and units

en: Variable names, description and units for the Pfynwald Gas exchange data

en: Methods ACi curves

media_type: text/csv

en:
Parameters and methods for CO2 response curves of Photosynthesis.

Metatdata format by
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

format: CSV

en: Methods light response

en: Methods and parameters for light response curves

en: Methods survey

en: Parameters and methods for point measurements / survey measurements

en: Instrument details

en:
Instrument details for all LiCor instruments used during collection of dataset.

Metatdata created following guidelines from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Pfynwald gas exchange

en:
Full dataset of Pfynwald gas exchange data taken in the period from June 2013 to October 2020.
All metdata can be found in attached documents.
Data uploaded after quality control using guidelines by Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Methods fluorescence

en:
Parameters and methodology for Fluorescence measurements

Metadata format from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Methods diurnal measurements

en:
Parameters and methodology for diurnal measurements

Metadata format from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en:
Gas exchange was measured on control, irrigated and irrigation-stop trees at the irrigation experiment Pfynwald, during the years 2013, 2014, 2016-2020. The measurement campaigns served different purposes, resulting in a large dataset containing survey data, CO2 response curves of photosynthesis, light response curves of photosynthesis, and fluorescence measurements. Measurements were done with LiCor 6400 and LiCor 6800 instruments. Until 2016, measurements were done on excised branches or branches lower in the canopy. From 2016 onwards, measurements were done in the top of the canopy using fixed installed scaffolds.
All metadata can be found in the attached documents.

acclimation

display_name: acclimation

drought

display_name: drought

fluorescence

display_name: fluorescence

gas-exchange

display_name: gas-exchange

photosynthesis

display_name: photosynthesis

pinus-sylvestris

display_name: pinus-sylvestris

vpd

display_name: vpd

en: 2013-2020 gas exchange at Pfynwald


rorcc

maintainer: Tobias Wechsler

title_for_slug: rorcc

en: environmental-flow climate-change run-of-river-power-plants design-discharge hydropower

en: RoRCC

en:
The dataset “RoRCC” consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
-	metadata on the RoR power plants under consideration
-	annual and seasonal production scenarios differentiated into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)
-	annual and seasonal production loss due to environmental flow requirements
-	annual and seasonal the technical increase potential (via design discharge optimisation)
-	annual and seasonal changes in the hydrological cycle for the three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)

en:
The dataset "RoRCC" consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
1) metadata on the RoR power plants under consideration, 2) annual and seasonal production potential scenarios under into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099), 3) annual and seasonal streamflow scenarios, 4) annual and seasonal production loss due to environmental flow requirements, 5) annual and seasonal the technical increase potential (via design discharge optimisation) and 6) annual and seasonal changes in the hydrological cycle.

climate-change

display_name: climate-change

design-discharge

display_name: design-discharge

environmental-flow

display_name: environmental-flow

hydropower

display_name: hydropower

run-of-river-power-plants

display_name: run-of-river-power-plants

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


maintainer: Roksolana Petrovska

en: mortality-rate regeneration shade-tolerance fagus dominance acer lar

en: The R-script of survival analysis for accelerated failure time model

en: Mortality of regeneration

en: Acer platanoides, Acer pseudoplatanus and Fagus sylvatica living and dead juveniles (0-500 cm in height) grown in the deep shade of a prime beech-dominated forest.

en:
 One individual per species, vitality class (low and high) and height class (eight classes: 0–10, 11–20, 21–35, 36–60, 61–90, 91–130, 131–200 and 201–500 cm) was randomly selected and harvested in each of the six plots. This resulted in a sample of 82, 80 and 89 living individuals of A. platanoides, A. pseudoplatanus and F. sylvatica, respectively.

 Additionally stems of dead Acer spp. and F. sylvatica trees that had died within the last three years (2015–2018) were randomly harvested, matching the height classes of the harvested living trees wherever possible. In total, 179 dead young trees (60 A. platanoides, 72 A. pseudoplatanus and 47 F. sylvatica) were collected.

 Variables:
* species_code: a_pla - Acer platanoides, a_pse - Acer pseudoplatanus, f_syl - Fagus sylvatica
* species: as above
* dummy: 0 - living individual, 1 - dead individual
* LAR_cm2_g: leaf area ratio or ratio of leaf area to total plant biomass, [cm2/g]
* tree_age: in years
* avg_ring_micron: average width of the last 5 rings in tree life excluding the last ring
* dry_mass_g: aboveground and belowground biomass
* DLI: direct light index (measured only under living individuals)
* BLI: diffuse light index (measured only under living individuals)
* GLI: global light index

acer

display_name: acer

dominance

display_name: dominance

fagus

display_name: fagus

lar

display_name: lar

mortality-rate

display_name: mortality-rate

regeneration

display_name: regeneration

shade-tolerance

display_name: shade-tolerance

en: Mortality of regeneration: Acer spp. and Fagus sylvatica


maintainer: Axel Volkwein

en: trajectory field-data field-test natural-hazards experiments rockfall field-tests experiment mass-movements

en: These data contain the point clouds obtained from laser scanning the test slope and the six test blocks used for the experiments. The coordinates of the slope are given in CH-1903 format. The coordinates of the block point clouds are kept in a lokal x/y/z coordinate system.

mimetype: application/zip

en: Jumps and impacts

en: This table contains data of more than 2200 of each jumps and impacts of the test blocks on a grassy slope. It gives there durations in combination with acting accerlartions and the rotational speed of the blocks. The data were retrieved using the block internal accelerometer and rotation sensors. The combination of these data with the measurement from the local positioning system allows the deduction of jump lengths, slope gradient etc.

en: Overview of all tests

en:
This table gives an overview on all tests performed including
- block used
- start & end position
- number of jumps
- etc.
-

en: Block trajectories recorded from local positioning system

en: This file contains more than 80 rockfall trajectories projected onto the terrain, i.e. the positions of the single blocks over time during the single tests that were recorded by the local positioning system with about 10Hz. It contains the detected positions as well as a smoothened path (see Volkwein et al., Geosciences, 2018). The table also contains the derived velocities and accelerations along the slope (attention: these accelerations are the once that occur during an impact).

en:
In summer 2014, 6 rock blocks between 20 and 80kg have been thrown in total 111 times down a slope at the Swiss Oberalppass close to the village Tschamut. The slope was mainly covered by grass and its lower part was flat and large enough to provide natural runouts of the single trajectories.

An extensive measurement program has been set up to measure the block trajectories: With surveyor's instruments the slope and the six used rock blocks were scanned and the start and end positions of each test were recorded. During the single events two cameras filmed the trajectories. A special sensor device located within the blocks recorded the acting accelerations and rotational speeds over time. Further, the device emitted a Wifi signal that got detected from eight receivers around the slope. Based on this signal the block position has been recorded over time.

The dataset contains all data that were gathered through above field campaign.

experiment

display_name: experiment

experiments

display_name: experiments

field-data

display_name: field-data

field-test

display_name: field-test

field-tests

display_name: field-tests

mass-movements

display_name: mass-movements

natural-hazards

display_name: natural-hazards

rockfall

display_name: rockfall

trajectory

display_name: trajectory

en: Repetitive trajectory testing in Tschamut 2014


root-traits

maintainer: Ivano Brunner

title_for_slug: root-traits

en: fine-root-traits belowground-biomass soil-coring drought ingrowth-cores

en: Root-traits

en:
Fine-root traits of Scots pine in response to enhanced soil water availability deriving from long-term irrigation in the Pfynwald

Data_Fig.1.xlsx
Fine-root biomass of the topsoil (0-10 cm) in the dry and irrigated treatment of the Scots pine forest of the years 2003 to 2016 recorded by soil coring

Data_Tab1+2_2005.xlsx
Fine-root traits from roots of ingrowth cores from 2005 after two years of growth in the dry and irrigated treatment of the Scots pine forest

Data_Tab1+2_2016.xlsx
Fine-root traits from roots of ingrowth cores from 2016 after two years of growth, and from roots of the soil-coring sampling from 2016 in the dry and irrigated treatment of the Scots pine forest

belowground-biomass

display_name: belowground-biomass

drought

display_name: drought

fine-root-traits

display_name: fine-root-traits

ingrowth-cores

display_name: ingrowth-cores

soil-coring

display_name: soil-coring

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: fish-composition bayofbiscay actinopterygii atlantic-region edna teleo metabarcoding chondrichthyes

en: Data access

en:
Environmental DNA complements scientific trawling in surveys of marine fish biodiversity (Dataset 2019)
In October 2019 we chose 15 sites from the 2019 EVHOE survey for eDNA sampling. The French international EVHOE bottom trawl survey is carried out annually during autumn in the BoB to monitor demersal fish resources. At each site, we sampled seawater using Niskin bottles deployed with a circular rosette. There were nine bottles on the rosette, each of them able to hold ∼5 l of water. At each site, we first cleaned the circular rosette and bottles with freshwater, then lowered the rosette (with bottles open) to 5 m above the sea bottom, and finally closed the bottles remotely from the boat. The 45 l of sampled water was transferred to four disposable and sterilized plastic bags of 11.25 l each to perform the filtration on-board in a laboratory dedicated to the processing of eDNA samples. To speed up the filtration process, we used two identical filtration devices, each composed of an Athena® peristaltic pump (Proactive Environmental Products LLC, Bradenton, Florida, USA; nominal flow of 1.0 l min–1 ), a VigiDNA 0.20 μm filtration capsule (SPYGEN, le Bourget du Lac, France), and disposable sterile tubing. Each filtration device filtered the water contained in two plastic bags (22.5 l), which represent two replicates per sampling site. We followed a rigorous protocol to avoid contamination during fieldwork, using disposable gloves and single-use filtration equipment and plastic bags to process each water sample. At the end of each filtration, we emptied the water inside the capsule that we replaced by 80 ml of CL1 conservation buffer and stored the samples at room temperature following the specifications of the manufacturer (SPYGEN, Le Bourget du Lac, France). We processed the eDNA capsules at SPYGEN, following the protocol proposed by Polanco-Fernández et al., (2020). We performed library preparation and sequencing at Fasteris (Geneva, Switzerland). Specifically, we prepared four libraries using the MetaFast protocol (a ligation-based method) and sequenced them separately. We carried out paired-end sequencing using a MiSeq sequencer (2 × 125 bp, Illumina, San Diego, CA, USA) on two MiSeq Flow Cell Kits (v3; Illumina), following the manufacturer’s instructions. We analysed the sequence reads using the OBITools package (http://metabarcoding.org/obitools; Boyer et al., 2016), following the protocol described by Valentini et al. (2016).
Data content:
	* rawdata/: contains the raw reads for each individual sample. One archive contains the paired-end reads specified by the _R1 or _R2 suffix as well as individually tagged PCR replicates (if available) together with an archive containing all extraction and PCR blank samples of the library. Reads have been demultiplexed using cutadapt but not trimmed, individual demultiplexing tags and primers remain present in the sequences.
	* taxadata/: contains the table with all detected taxonomy for each sample after bioinformatic processing (see Polanco et al. 2020 for details; https://doi.org/10.1002/edn3.140) and associated field metadata.
	* metadata/: contains two metadata files, one related to the data collected in the field for each filter, and the second related to the sequencing process in the lab (including the tag sequence, library name, and marker information for each sample)

actinopterygii

display_name: actinopterygii

atlantic-region

display_name: atlantic-region

bayofbiscay

display_name: bayofbiscay

chondrichthyes

display_name: chondrichthyes

edna

display_name: edna

fish-composition

display_name: fish-composition

metabarcoding

display_name: metabarcoding

teleo

display_name: teleo

en: Environmental DNA Marine France Evhoe 2019


maintainer: Frank Techel

en: avalanche-forecast snow european-alps warning-regions danger-level

en: Forecast avalanche danger level

en: contains the highest forecast danger level (dangerLevelMax) for each day and warning region

mimetype: text/csv

en: shape file warning regions Alps

en:
This dataset contains the data used in the publication by Techel et al., 2018 _Spatial consistency and bias in avalanche forecasts - a case study in the European Alps_ (Nat Haz Earth Syst Sci).
For details on the data please refer to this publication.
The dataset contains the following:
- shape files for the warning regions in the Alps
- highest forecast danger level for each warning region and day

avalanche-forecast

display_name: avalanche-forecast

danger-level

display_name: danger-level

european-alps

display_name: european-alps

snow

display_name: snow

warning-regions

display_name: warning-regions

en: Forecast avalanche danger level European Alps 2011 - 2015


en: switzerland avalanche-observations rutschblock-test norway avalanche-danger extended-column-test

en: avalanche occurrence data (Norway, Sitzerland) - largest avalanche size per day and warning region

en: ECT data (Norway, Switzerland)

en: avalanche occurrence data (Norway, Sitzerland) - avalanche sizes per day and warning region

en: Rutschblock data (Switzerland)

en:
Observational data used to quantitatively describe the key elements describing avalanche danger: snowpack stability, the frequency distribution of snowpack stability, and avalanche size.
The data set consists of
- Rutschblock test results (Switzerland)
- Extended Column Test results (Switzerland, Norway)
- Avalanche occurrence data (Switzerland, Norway).
The data were extracted from the respective operational databases of the national avalanche warning services in Switzerland (WSL Institute for Snow and Avalanche Research SLF Davos, Switzerland) and Norway (The Norwegian Water Resources and Energy Directorate NVE).
For further information regarding the data, please refer to the publication or contact the author.

avalanche-danger

display_name: avalanche-danger

avalanche-observations

display_name: avalanche-observations

extended-column-test

display_name: extended-column-test

norway

display_name: norway

rutschblock-test

display_name: rutschblock-test

switzerland

display_name: switzerland

en: Stability tests, avalanche observations, Switzerland, Norway


en: precipitation stream-water spatially-distributed-sampling geochemical-solutes stable-water-isotopes

en: The dataset contains daily measurements of volumes, isotopes and solutes of stream water as well as precipitation measured several locations; meteorological variables are added. Date: 18.07.2019

en:
This dataset contain measurements of solute and stable water isotopes in stream water and precipitation in the Alp catchment and two of its tributaries (between 2015 -2018) . The river Alp is a snow-dominated catchment situated in Central Switzerland characterized by an elevation range from 840 to 1898 m a.s.l. The dataset provides solutes (major anions and cations, trace metals) and stable water isotopes and water fluxes (precipitation rates, discharge) at daily intervals from several sampling locations.
An updated version of the isotope dataset is available here: https://www.doi.org/10.16904/envidat.242

geochemical-solutes

display_name: geochemical-solutes

precipitation

display_name: precipitation

spatially-distributed-sampling

display_name: spatially-distributed-sampling

stable-water-isotopes

display_name: stable-water-isotopes

stream-water

display_name: stream-water

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Daily data of solute and stable water isotopes in stream water and precipitation in the Alp catchment, Central Switzerland


maintainer: Sven-Eric Hopf

en: iap fraxinus ash-dieback monitoring forest

en: Monitoring of ash trees as part of the Intercantonal Forest Observation Programme

en: Packgroun information on data for the publication: Spread and Severity of Ash Dieback in Switzerland – Tree Characteristics and Landscape Features Explain Varying Mortality Probability, (Klesse et al. 2021, Front. For. Glob. Change 4:645920., doi: 10.3389/ffgc.2021.645920)

en:
In 2013, the Institute for Applied Plant Biology (IAP) started a monitoring programme to study the development and the spatial variation of the ash dieback disease with the aim to find some partially resistant European ash trees (Fraxinus excelsior).
We collaborate as co-authors for the publication: Spread and Severity of Ash Dieback in Switzerland - Tree Characteristics and Landscape Features Explain Varying Mortality Probability (Klesse et al. 2021 in frontiers)

ash-dieback

display_name: ash-dieback

forest

display_name: forest

fraxinus

display_name: fraxinus

iap

display_name: iap

monitoring

display_name: monitoring


maintainer: Matthias Haeni

en: wind-speed relative-humidity meteorology par temperature precipitation climate-change long-term meteo swiss-forest-lab

en: Site aerial photo (Nationalpark)

en: Site aerial photo from both Nationalpark stations. Source: Google. 2016. Site aerial photo from both Nationalpark stations. Retrieved November 11, 2016, from https://www.google.ch/maps

mimetype: image/jpeg

en: Site photo of the forest station (NAB)

en: Site photo of the forest station from the side.

en: Site photo of the field station (NAF)

en: Site photo of the field station form the side.

en: Data plot of the forest station (NAB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

mimetype: application/pdf

en: Field station data (NAF)

en: Data file.

en: Forest station data (NAB)

en: Data plot of the field station (NAF)

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Nationalpark in Switzerland where one station is located within a natural coniferous forest stand (NAB) with mountain pine (_Pinus mugo_; 210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, NAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Nationalpark is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Nationalpark, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: extreme-events protection-forest protective-effect forest-fire drought bark-beetles compound-events natural-hazards

en: Description of the study site, extreme event (trigger event) and informations about the survey.

en: Conclusions and recommendations of the project (in German).

en: Factsheet summarising the key results of the study (in French).

en: Factsheet summarising the key results of the study (in Italian).

en: Factsheet summarising the key results of the study (in German).

en: Factsheet summarising the methods used in this project (in German).

en: Case study website

media_type: text/html

en: Page of the case study on the project website. It includes figures fo all questions of the survey and additional synthesis graphs.

format: HTML

en:
This file contains the anonymous answers to the survey for the case study in the protective forest, Val Mesolcina, GR, Switzerland within the BAFU Project "Wenn Risiken kumulieren - Analyse und Umgang mit unerwarteten Ereignissen und kombinierten Risiken".
The survey consists of two parts, based on different concepts: "top-down" and "bottom-up". Answers for both concepts are available in two different worksheets within the Excel file.

en:
This dataset contains the results of a case study analysing the potential impacts of a compound meteorological extreme event on the protective forest in the Val Mesolcina. These impacts were assessed in an experts survey. 29 Experts from practice, administration and science estimated the probabilities for a loss of the protective function due to a drought-related compound extreme event based on different hazard scenarios. The experts not only assessed these probabilities but also provided estimates about the reliability of the scenarios, other socio-economic consequences and options for adaptation.
This dataset contains the following information:
- Table with all (anonymised) answers from the survey
- Factsheets summarising the results and methods in German, French and Italian
- A detailed description of the study site and survey instructions
- Link to the project website wit illustrations for each individual question of the survey

bark-beetles

display_name: bark-beetles

compound-events

display_name: compound-events

drought

display_name: drought

extreme-events

display_name: extreme-events

forest-fire

display_name: forest-fire

natural-hazards

display_name: natural-hazards

protection-forest

display_name: protection-forest

protective-effect

display_name: protective-effect

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Experts survey protective forest and combined extremes in Val Mesolcina


soil-property-maps-for-the-swiss-forest

title_for_slug: soil-property-maps-for-the-swiss-forest

en: soil-ph forest soc soil-texture soil-depth soil-properties soil dsm switzerland

en:
We used 2071 forest soil profiles to model a wide range of soil properties for the forested area of Switzerland. The spatial prediction is based on the principle of «digital soil mapping». This involves linking soil profiles with soil forming factors using statistical or machine learning methods.

A quantile regression forest (QRF) approach was applied to predict the following soil properties at six depth ranges: clay, gravel, sand, fine earth density, SOC. The depth ranges correspond to the standard depths of the [GlobalSoilMap.Net](https://www.isric.org/) specification: 0–5, 5–15, 15–30, 30–60, 60–100 and 100–200 cm. In addition, the total soil depth down to a non-root-permeable layer or solid rock soil thick was predicted. To quantify the uncertainty for each predicted pixel, the upper and lower limit of the 90% prediction interval derived from QRF was calculated. More details on the methods and results are described in Baltensweiler et al. 2021 and Baltensweiler et al 2022.

The soil property maps, and the uncertainty maps are provided as a GeoTIFF files at 25 m resolution. The excel file (xlsx) provides a short description of the raster layers.

**The soil and the uncertainty maps can be viewed in a simple web-GIS application available at:**
[www.wsl.ch/soilmaps](https://www.wsl.ch/soilmaps).

dsm

display_name: dsm

forest

display_name: forest

soc

display_name: soc

soil

display_name: soil

soil-depth

display_name: soil-depth

soil-ph

display_name: soil-ph

soil-properties

display_name: soil-properties

soil-texture

display_name: soil-texture

switzerland

display_name: switzerland

en: Soil property maps for the Swiss forest


en: terrain solar-irradiance lidar transmissivity solar-energy radiation-transfer light-availability sky-view-fraction forests shortwave-radiation

en: DataLink

en:
The SwissRad10 dataset contains light availability maps at 10 m and hourly resolution across an entire annual cycle with wall-to-wall coverage across the whole of Switzerland.
Areas below and within 25 m of forests include light availability calculated for both leaf-on and leaf-off canopy structure, and terrain only data is available across the full domain.
The variables sky-view fraction and direct-beam transmissivity are both included, allowing estimation of both direct and diffuse light at the ground surface.
The dataset was calculated using the detailed synthetic hemispheric image-based ray-tracing Canopy Radiation Model (CanRad) with the latest airborne lidar and terrain surface data from the swissSURFACE3D dataset.

forests

display_name: forests

lidar

display_name: lidar

light-availability

display_name: light-availability

radiation-transfer

display_name: radiation-transfer

shortwave-radiation

display_name: shortwave-radiation

sky-view-fraction

display_name: sky-view-fraction

solar-energy

display_name: solar-energy

solar-irradiance

display_name: solar-irradiance

terrain

display_name: terrain

transmissivity

display_name: transmissivity

en: SwissRad10 Hourly light availability maps at 10 m resolution over Switzerland


en: species-distribution-models phylogenetic-diversity functional-diversity european-alps zonation plants migclim beta-diversity land-use-change conservation global-change taxonomic-diversity

en: Updated SDM outputs

en: Refined scenarios of plants distribution in the European Alps

format: GeoTIFF

en: Data Access

en:
This repository contains extensive data for the European Alps:
  - Observations of ~3,500 plant species
  - Climate (1-km), soil (100-m) and land cover predictors (1km); current and future scenarios (28 CMIP6-GCMs, 2 land cover change and 3 dispersal scenarios i.e., unlimited, no and realistic vegetation dispersal)
  - Flora migration rates (categorical) and ecological preferences (continuous indicator values)
  - Regional maps of barriers to migration and water bodies at 100-m resolution
  - Sampling effort, distance to roads and cities predictors at 100-m resolution
  - Present and future abundances over the study region at 1-km resolution (~2,000 species)
  - Present and future multifaceted and uniqueness of the European Alps' Flora at 1-km resolution
  - Present and future conservation recommendations at 1-km resolution (26 current and future strategies)
  - Phylogenetic data and functional traits of ~2,000 plants (raw data and classification trees)
  - All scripts, data and plots used for the analyses, including a singularity container (mini-linux) to run them

beta-diversity

display_name: beta-diversity

conservation

display_name: conservation

european-alps

display_name: european-alps

functional-diversity

display_name: functional-diversity

global-change

display_name: global-change

land-use-change

display_name: land-use-change

migclim

display_name: migclim

phylogenetic-diversity

display_name: phylogenetic-diversity

plants

display_name: plants

species-distribution-models

display_name: species-distribution-models

taxonomic-diversity

display_name: taxonomic-diversity

zonation

display_name: zonation

en: Present and future multifaceted plant diversity, uniqueness and conservation in the European Alps


en: invasive-species biological-invasions plants artificial-intelligence automatic-detection computer-vision

en: Detected occurrences of Ailanthus altissima along highways on the Swiss Plateau. To reduce false-positives, only images in which the species was recognized in at least three of 16 image tiles are considered as occurrences (Fig. 38 in the report). Image coordinates of the middle and side strips can be displayed separately in the interactive map.

en: Detected occurrences of Senecio inaequidens along highways on the Swiss Plateau. The number of image tiles in which the species was recognized is shown (Fig. 25 in the report). Image coordinates of the middle and side strips can be displayed separately in the interactive map.

en: Detected occurrences of Senecio inaequidens along highways on the Swiss Plateau. To reduce false-positives, only images in which the species was recognized in at least three of 16 image tiles are considered as occurrences (Fig. 40 in the report). Image coordinates of the middle and side strips can be displayed separately in the interactive map.

en: Detected occurrences of Ailanthus altissima along highways on the Swiss Plateau. The number of image tiles in which the species was recognized is shown (Fig. 23 in the report). Image coordinates of the middle and side strips can be displayed separately in the interactive map.

en:
Transport infrastructure such as **highways** are important corridors for the spread of invasive species. In this project, an automated detection and mapping of **two invasive alien plant species** was developed and applied along highways in the **Swiss Central Plateau**, based on **artificial intelligence (AI, Deep Learning)**. The two target species are **tree of heaven *(Ailanthus altissima)*** and **narrow-leaved ragwort *(Senecio inaequidens)***.
The data is part of the project report and shows the mapping results in **interactive maps**. Technically speaking, these are **self-contained HTML files** that can be displayed with standard web browsers. To reduce the file size, the downloads are provided in zip format.
**Report**: [https://www.mobilityplatform.ch/de/research-data-shop/product/1690](https://www.mobilityplatform.ch/de/research-data-shop/product/1690)
**Project**: [https://www.wsl.ch/en/projects/automated-detection-of-invasive-alien-plants-along-highways/](https://www.wsl.ch/en/projects/automated-detection-of-invasive-alien-plants-along-highways/)

artificial-intelligence

display_name: artificial-intelligence

automatic-detection

display_name: automatic-detection

biological-invasions

display_name: biological-invasions

computer-vision

display_name: computer-vision

invasive-species

display_name: invasive-species

educ

en: Education, culture and sport

en: Automated detection of invasive alien plants along highways


maintainer: Anita C. Risch

en: herbivory weed-management non-native-plant grassland native-plant

en: Correction: Data file native and non-native plant interactions in Australian grasslands

en:
taxa tab:	list and overview of all the recorded species

* family:                 family of the plant

* genus:                genus of the plant

* species:                plant species name

* origin:                indicates whether the plant is native to Australia or not (non-native)

* common name:	        common name of the plant species

* functional group:	        functional group of the plant species: forb, graminoid, fern, tree

* functional group detailed:	gives more detail about the type of graminoid and forb: legume, forb (non-leguminous),
                        grass, sedge, rush, fern, tree

* lifeform:                annual or perennial lifeform (species which can have both of these lifeforms where
                        considered as annuals)

plot tab:	list of species found in each plot and their cover (%)

* sampling.session:        provides information about the sampling time:
                        May2020 = data that was collected in May 2020
                        Nov2020 = data that was collected in November 2020

* farm.name:	            name of the farms where the sampling took place:
                        SF = farm of the Southern group
                        NF = farm of the Northern group
                        numbers 1-3 = randomly allocated to the Southern group of farms
                        numbers 4-6 = randomly allocated to the Northern group of farms

* site.type:	                KG: Kangaroo grass dominated site
                        ALG: ALG+KG site (Kangarooo grass and African lovegrass co-dominated site)

* plot.no:                plot number: 9-12

* scientific.name:	        scientific name of the plant species found in a certain plot

* functional group:	        indicates whether the species found is a tree, forb, graminoid or fern

* functional group detailed:	indicates whether the species found is a tree, legume, forb (non-leguminous),
                        grass, sedge, rush, fern

* lifeform:                specifies the lifeform of the species: annual or perennial lifeform
                        (species which can have both of these lifeforms where considered as annuals)

corrections tab:	Detailed description of corrections made in plot.data tab

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Schlierenzauer, C., Risch, A.C., Schütz, M., Firn, J. 2021. Non-native Eragrostis curvula reduces plant species diversity in pastures of South-eastern Australia even when native Themeda triandra remains co-dominant. Plants 10, 596._

Please cite this paper together with the citation for the datafile.

Study area
The study was conducted in the lowland grassy woodlands of the Bega Valley Region, which is located in the south-east corner of New South Wales, Australia. Embedded between the Pacific Ocean and the Australian Alps, the lowland grassy woodlands are mostly located on granitic substrates and reach elevations of roughly 500 m above sea level. Typically, these grassy woodlands receive less precipitation (mean annual precipitation between 700-1100 mm) compared to the more elevated areas that surround them (NSW Government - Office of Environment and Heritage 2017).
The vegetation is dominated by an open tree canopy layer consisting of Eucalyptus tereticornis Sm, Angophora floribunda Sm. (Sweet) and a range of other eucalypt species. Sometimes shrub or small trees are also present, whereas grasses and forbs form the ground-cover. In areas without intensive agricultural history, this layer is dominated by perennial, tussock grasses such as Themeda triandra Forssk, Microlaena stipoides R.Br (Weeping Grass), Eragrostis leptostachya Steud. (Paddock Lovegrass) and Echinopogon ovatus P.Beauv (Forest Hedgehog Grass). The remaining inter-tussock spaces are occupied by a diversity of growth-restricted grasses and herbaceous forbs (NSW - Department of Planing, Industries and Environment 2019; NSW Government - Office of Environment and Heritage 2017).
Clearing, pasture sowing, fertilizer application and livestock grazing resulted in a dramatic decrease in the extent of these natural woodlands, with less than five percent within conservation reserves and overall, with only about 20% of their original extent in New South Wales still existing (Tozer et al. 2010). The remaining areas outside of reserves are threatened by altered fire frequencies, habitat clearing, livestock grazing and especially by non-native plant invasion, particularly Eragrostis curvula (Schrad.) Nees. For this reason, the grassy woodlands are listed as an endangered ecological community in the NSW state legislation. Additionally, they are considered as critically endangered by the Commonwealth of Australia (Threatened Species Scientific Committee (TSSC) 2013).

Experimental design and sampling
The study was conducted on six farms and in each of them two sites were chosen, representing a paired design. One of the sites at each farm is dominated by native Themeda triandra, the other one co-dominated by non-native Eragrostis curvula and Themeda triandra. All farms are within a radius of approximately 10 km from the town Candelo. Three of the farms are located North (36°40’ to 36°42’ S and 149°38’ to 149°42’ E) and three of them are located South (36°51’ to 36°49’ S and 149°38’ to 149°42’ E) of Candelo.
Non-native herbivores (mainly cattle, sheep and rabbits) and native herbivorous marsupials (mainly kangaroos, wallabies and wombats) are present in the area of these sites. On each site, data was collected within four plots (each 1 x 1 m) in May and November 2020. All plant species found within a plot were recorded and their relative abundance was estimated.

References
NSW - Department of Planing, Industries and Environment. 2019. “Lowland Grassy Woodland in the South East Corner Bioregion - Endangered Ecological Community Listing.” https://www.environment.nsw.gov.au/topics/animals-and-plants/threatened-species/nsw-threatened-species-scientific-committee/determinations/final-determinations/2004-2007/lowland-grassy-woodland-south-east-corner-bioregion-endangered-ecological-community-l (February 18, 2021).
NSW Government - Office of Environment and Heritage. 2017. “Lowland Grassy Woodland in the South East Corner Bioregion - Profile.” https://www.environment.nsw.gov.au/threatenedSpeciesApp/profile.aspx?id=20070 (January 31, 2021).
Threatened Species Scientific Committee (TSSC). 2013. Environment Protection and Biodiversity Conservation Act 1999 (EPBC Act) Conservation Advice for Lowland Grassy Woodland in the South East Corner Bioregion. http://www.environment.gov.au/biodiversity/threatened/communities/pubs/82-conservation-advice.pdf.
Tozer, Mark et al. 2010. “Native Vegetation of Southeast NSW: A Revised Classification and Map for the Coast and Eastern Tablelands.” Cunninghamia : a journal of plant ecology for eastern Australia 11(3): 359–406.

grassland

display_name: grassland

herbivory

display_name: herbivory

native-plant

display_name: native-plant

non-native-plant

display_name: non-native-plant

weed-management

display_name: weed-management

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Native and no-native plant interactions in Australian grasslands


en: snow avalanche-danger avalanche-forecasting danger-level snow-instability avalanche

en: Field observations of snow instabilities

en: Read-me file

en: This read-me file contains the descriptions of the variables.

en:
This data set includes 589 snow profile observations including a rutschblock test, observations of signs of instability and an assessment of the local avalanche danger level, mainly recorded in the region of Davos (eastern Swiss Alps) during the winter seasons 2001-2002 to 2018-2019.

These data were analyzed and results published by Schweizer et al. (2021). They characterized the avalanche danger levels based on signs of instability (whumpfs, shooting cracks, recent avalanches), snow stability class and new snow height.

The data are provided in a csv file (589 records); the variables are described in the corresponding read-me file.

These data are the basis of the following publication: Schweizer, J., Mitterer, C., Reuter, B., and Techel, F.: Avalanche danger level characteristics from field observations of snow instability, Cryosphere, 15, 3293-3315, https://doi.org/10.5194/tc-15-3293-2021, 2021.

 Acknowlegements
Many of the data were recorded by SLF observers and staff members, among those Roland Meister, Stephan Harvey, Lukas Dürr, Marcia Phillips, Christine Pielmeier and Thomas Stucki. Their contribution is gratefully acknowledged.

avalanche

display_name: avalanche

avalanche-danger

display_name: avalanche-danger

avalanche-forecasting

display_name: avalanche-forecasting

danger-level

display_name: danger-level

snow

display_name: snow

snow-instability

display_name: snow-instability


en: environmental--policy environmental---history switzerland ecology wetlands historical-carthography

en: Wetlands 1850 - 2010 (shapefiles)

en:
 History of wetlands - GIS-Layers
 Location of wetlands based on signatures in topographic maps
* Basis 1850: original measuring table sheets Dufour created between the years 1834 and 1863.
* Basis 1900/ Basis 1950: The Siegfried maps were updated and published at regular intervals between 1870 and 1949. This long period of time made it possible to reconstruct wetlands for two periods based on the Siegfried Maps: the first edition (hereinafter referred to as "1900") and the last edition ("1950").
* Basis 2010: Map sheets from the National Map from 2006 to 2011 were used for the most recent time period of the reconstruction.
 Location of wetlands due to reconstructions
The reconstruction **must not** be interpreted in the sense of a surface-accurate separation, but shows without claim to location accuracy the approximate extent of the areas that would have corresponded to the mapping criteria for wetlands used in today's topographic maps around 1850, 1900 and 1950. The basics can be found in Stuber & Bürgi 2019, chapter 5.4.

en:
Naturally, large parts of the Swiss Plateau are characterised by wetlands
and meandering rivers. That this is no longer the case today is the result
of centuries of efforts to obtain dry land. But how did this process take
place? What were the relevant actors and what were their motivations? And
what can be said about the ecological consequences of this development?

In a research project on the history of wetlands in Switzerland since 1700,
we conducted (a) a historical analysis of the development of land use in
wetlands and the actors involved, (b) a historical-cartographic
reconstruction of wetland extent since 1850 and (c) an evaluation of
ecological effects of changes in wetlands on various organisms groups.

The series of GIS layers on wetland history stem from the second part of
the project. The area reconstruction is based on digitized and homogenized
signatures from national map series, as they have been available since
about 1850. Details about the digitalization process and the homogenization
procedures applied ("Rekonstruktionen") are included in Stuber & Bürgi
2019.

Book Citation:
 > Stuber M, Bürgi M (2019) Vom «eroberten Land» zum Renaturierungsprojekt. Geschichte der Feuchtgebiete in der Schweiz seit 1700. "Bristol Schriftenreihe", Band 59. Haupt Verlag, Bern, Stuttgart, Wien. 262 Seiten.

ecology

display_name: ecology

environmental---history

display_name: environmental---history

environmental--policy

display_name: environmental--policy

historical-carthography

display_name: historical-carthography

switzerland

display_name: switzerland

wetlands

display_name: wetlands

en: History of wetlands in Switzerland since 1850


maintainer: Paraskevi Georgakaki

en: liquid-water-content ice-water-content secondary-ice-production blowing-snow jungfraujoch wrf ice-crystal-number-concentration swiss-alps

en: WRF outputs

en:
The .zip file contains all the NetCDF outputs produced by the mesoscale Weather Research and Forecasting (WRF) model (version: 4.0.1). Two case studies were simulated in this study, between 25-28 January 2014 (00:00 UTC) and 29 January - 1 February 2014 (00:00 UTC), respectively. The former is denoted as "NW" and the latter as "SE", owing to the prevailing wind conditions at the Jungfraujoch (JFJ) station.

The outputs come from the innermost domain of the simulations with a spatial resolution of 1 km and are extracted from the nearest to JFJ model grid point (46.55°N 7.98°E). The dimensions of each model variable is [145,100], which corresponds to time and height, respectively. The frequency of the outputs is 30 min. Note that the first 24 hours of each simulation (i.e., the first 48 outputs) were considered spin up time.

The following sets of sensitivity simulations were presented in this study:

* CNTRL_NW.nc, CNTRL_SE.nc : Sensitivity simulations performed with the default version of WRF
* DS_PHILL_NW.nc, DS_PHILL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Phillips et al. (2018)
* DS_SULL_NW.nc, DS_SULL_SE.nc : Sensitivity simulations including a description of the droplet shattering process following Sullivan et al. (2018)
* PHILL_NW.nc, PHILL_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Phillips et al. (2017)
* TAKAH_NW.nc, TAKAH_SE.nc : Sensitivity simulations including a description of the ice-ice collisional break-up process following Sullivan et al. (2018) based on Takahashi et al. (1995)
* TAKAHrim_NW.nc, TAKAHrim_SE.nc : Same set-up as before but applied only to collisions between rimed ice particles
* BIPS_Xk0_DY_NW.nc, BIPS_Xk0_DY_SE.nc : Sensitivity simulations including a source of Xk0 (either 10.0 or 100.0 L⁻¹) ice crystals with sizes of DY (either 10 or 100 μm) in the first atmospheric level of the model
* BIPS100_PHILL_NW.nc, BIPS100_PHILL_SE.nc : Sensitivity simulations where the combined effect of blowing snow and ice-ice collisional break-up is examined

en: Observational data

en:
The .zip file contains 6 .csv files including all microphysical measurements taken at the Jungfraujoch station during the two periods of interest:

* 25-28 January 2014 : northwesterly-winds (NW)
* 29 January - 1 February 2014 : southeasterly-winds (SE)

The total Ice Crystal Number Concentration (ICNC; reported in L⁻¹) is measured by the two-dimensional stereo hydrometeor spectrometer (2D-S; Lawson et al., 2006) over the size range 10-1280 μm. The total ice water content (IWC; reported in gm⁻³) is also derived by the 2D-S data using the Brown and Francis (1995) mass-diameter relationship. Finally, the quantification of the liquid water content (LWC; reported in gm⁻³) is based on the liquid droplet size distribution data derived from a DMT cloud droplet probe (CDP; Lance et al., 2010) over the size range 2-50 μm. The frequency of the measurements in the .csv files is 30 min, to match the output frequency of the model. Datetime is also reported in the files (DD/MM/YYYY h:mm) in UTC.

Acknowledgment: Collection and pre-processing of the microphysical measurements has been performed by Gary Lloyd (gary.lloyd@manchester.ac.uk). More details about the instrumentation during the CLACE2014 campaign can be found in Lloyd et al. (2015).

en:
This repository contains all WRF model outputs and observational data sets used for the paper:
Georgakaki, P., Sotiropoulou, G., Vignon, É., Billault-Roux, A.-C., Berne, A., and Nenes, A.: Secondary ice production processes in wintertime alpine mixed-phase clouds, Atmos. Chem. Phys. Discuss., https://doi.org/10.5194/acp-2021-760, in review, 2021.

blowing-snow

display_name: blowing-snow

ice-crystal-number-concentration

display_name: ice-crystal-number-concentration

ice-water-content

display_name: ice-water-content

jungfraujoch

display_name: jungfraujoch

liquid-water-content

display_name: liquid-water-content

secondary-ice-production

display_name: secondary-ice-production

swiss-alps

display_name: swiss-alps

wrf

display_name: wrf

educ

en: Education, culture and sport

en: Data for the publication "Secondary ice production processes in wintertime alpine mixed-phase clouds"


en: face forest soil picea-abies nitrogen co2

en: Gross N mineralisation and nitrification

en: Gross rates of N mineralisation and nitrification (15N dilution)

en: Water analyses

en: Analyses of water, especially soil solution

en: Soil C and N

en: Analyses of C, N and their stable isotopes in the soil, and soil pH

en: Resin bags

en: Ammonium, nitrate and their 15N in resin bags

en: Collection points

en: Collection points under the trees

en: Collection of soil solution

en: Soil solution collected by suction cups

en: Data obtained in the free-air CO2 enrichment (FACE) experiment at Hofstetten, NW Switzerland, between 2009 and 2016. This dataset contains analyses of the soil solution throughout the experiment, especially for nitrate, as well as different analyses done at the end of the experiment: ammonium and nitrate captured by ion-exchange resin bags and extracted from soil cores, gross N mineralisation and nitrification measured by isotope dilution.

face

display_name: face

forest

display_name: forest

nitrogen

display_name: nitrogen

picea-abies

display_name: picea-abies

soil

display_name: soil

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Nitrogen availability under trees exposed to CO2 enrichment (FACE)


en: forest-management climate-change spatial-modelling bioclimatic-variables land-use r-package species-migration treemig forest-dynamics forest example-applications

en: A condensed instruction for running the presented simulations.

en: R-script to install the TreeMig framework and start the graphical user interface

en: Where the environmental and land use input data come from and how they were processed

en:
1) Simulation environment TMEnvironmentExampleApplications for the simulation of the case study applications. It contains a) simulation settings (folder C), b) species parameters (folder P), c) folders S, R and P for the state files and results and plots to be produced, and the binaries of the TreeMig model.
2) Input data for Switzerland in TMInputData (Climate, soil, land cover, DEM)
3) Several R scripts (folder Scripts) to run and plot the simulations directly from R without having to use the graphical user interface.
For learning how to use TreeMig we recommend the starter kit https://www.doi.org/10.16904/envidat.533.

en:
The [TreeMig framework](https://treemig.wsl.ch/en/) allows for an easy application of the forest landscape model TreeMig for simulating forest dynamics in space under changing environmental and land use conditions.
Here, case study examples in Switzerland are given that simulate the dynamics and spatial spread of competing tree species in a region in Switzerland, the invasion of a hypothetical invasive tree species, and the control of this species via a management model coupled to TreeMig. The datasets consist of the installation- and GUI starting-script, example environmental input data for Switzerland, the simulation environment, and further R-scripts for running the simulations and plotting the simulation results directly from R and for coupling TreeMig to the forest management model.

bioclimatic-variables

display_name: bioclimatic-variables

climate-change

display_name: climate-change

example-applications

display_name: example-applications

forest-dynamics

display_name: forest-dynamics

forest-management

display_name: forest-management

land-use

display_name: land-use

r-package

display_name: r-package

spatial-modelling

display_name: spatial-modelling

species-migration

display_name: species-migration

treemig

display_name: treemig

educ

en: Education, culture and sport

en: Case study applications demonstrating the use and potential of the TreeMig framework v1


en: drought-legacy herbivory climate-change fagus-sylvatica phytochemistry

en:
What are the research data files about:
Raw data on various beech (Fagus sylvatica) leaf traits. Beech leaf chemistry (primary and specialized metabolites), leaf damage measurements from various herbivore feeding guilds and crown health assessment

Which methods were used:
Field surveys on trees that showed either prematured defoliation due to drought-stress or showed not pre-mature defoliation. .

When and where was the data collected/analyzed:
Field data was collected in 2019, 2020
Data was analyzed in 2021-2023

drought-legacy

display_name: drought-legacy

fagus-sylvatica

display_name: fagus-sylvatica

herbivory

display_name: herbivory

phytochemistry

display_name: phytochemistry

en: Legacy effects of premature defoliation in response to an extreme drought event modulate phytochemical profiles with subtle consequences for leaf herbivory in European beech


c-n-p-release-treeline

title_for_slug: c-n-p-release-treeline

en: carbon-cycle treeline-ecosystems biogeochemical-cycling climate-change microbial-biomass nutrient-fluxes enzymatic-activities litter-decomposition

en: Litter layer characteristics, C-N-P-release during decomposition, microbial C-N-P, enzyme activity, mineralization of 13C-labeled glucose-6-phosphate from samples collected across two treelines

en:
1. Chemical characteristics of litter layer sampled along elevation gradient across treeline ecotones in the Khibiny mountains (birch) and South Urals (spruce)
2. Release of C-N-P during decomposition at 5°C and 15° studied in an incubation experiment with microlysimeters
3. Data on microbial biomass C-N-P, potential activity of C-N-P requiring enzymes in the litter layer
4. Mineralization of 13C labeled glucose-6 phosphate, microbial 13C uptake, and net P immobilization of released P to identify microbial processing of labile organic P

biogeochemical-cycling

display_name: biogeochemical-cycling

carbon-cycle

display_name: carbon-cycle

enzymatic-activities

display_name: enzymatic-activities

litter-decomposition

display_name: litter-decomposition

microbial-biomass

display_name: microbial-biomass

nutrient-fluxes

display_name: nutrient-fluxes

treeline-ecosystems

display_name: treeline-ecosystems

en: C-N-P-Release Treeline


en: relative-humidity par temperature precipitation meteorology long-term meteo swiss-forest-lab wind-speed climate-change

en: Site aerial photo (Beatenberg)

en: Site aerial photo from both Beatenberg stations. Source: Google. 2016. Site aerial photo from both Beatenberg stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Data plot of the forest station (BAB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site photo of the forest station (BAB)

en: Site photo of the forest station from below (viewing upwards the slope).

en: Site photo of the field station (BAF)

en: Site photo of the field station from below (viewing upwards the slope).

en: Data plot of the field station (BAF)

en: Forest station data (BAB)

en: Data file.

en: Field station data (BAF)

en:
High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Beatenberg in Switzerland where one station is located within a natural coniferous forest (BAB) with Norway spruce (_Picea abies_; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, BAF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Beatenberg is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the
Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Beatenberg, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: lidar single-tree forest-inventory biomass terrestiral-laserscanning tree-volume

en: Individual tree parameters and volume estimates based on TLS point clouds and allometric models

en:
"ASM" denotes volume estimates calculated by allometric scaling models (as used in Swiss NFI), based on tree height, DBH and D7.
"QSM" denotes volume estimates derived from TLS point clouds by quantitative structure models (QSM).
The remaining variables are geometrical features directly calculated from single tree TLS point clouds.
For more detailed variable descriptions see related publication.

en:
 Dataset
This dataset is based on terrestrial laser scanning (TLS) data acquired during winter 2020/2021 in leaf-off conditions, with a Leica BLK 360 instrument following a tree-centric scanning pattern.
The data was acquired on two sites (47.42°N 8.49°E and 47.504°N, 7.78°E), both of which were managed mixed temperate forest stands.
Individual trees were semi-automatically segmented from the co-registered TLS point clouds.

 Background
Accurate estimates of individual tree volume or biomass within forest inventories are essential for calibration and validation of biomass mapping products based on Earth observation data.
Terrestrial laser scanning (TLS) enables detailed and non-destructive volume estimation of individual trees, with existing approaches ranging from simple geometrical features to virtual 3D reconstruction of entire trees. Validating such approaches with weight measurements is a key step before the integration of TLS or other close-range technologies into operational applications such as forest inventories.
In this study, we firstly evaluate individual tree volume estimation approaches based on 3D reconstruction through quantitative structure models (QSM) against destructive reference data of 60 trees and compare them to operational allometric scaling models (ASM).
Secondly, we determine the explanatory power of TLS-derived geometric parameters regarding total tree, stem, coarse wood and fine branch volume.

biomass

display_name: biomass

forest-inventory

display_name: forest-inventory

lidar

display_name: lidar

single-tree

display_name: single-tree

terrestiral-laserscanning

display_name: terrestiral-laserscanning

tree-volume

display_name: tree-volume

educ

en: Education, culture and sport

en: Individual tree TLS point clouds for tree volume estimation


maintainer: Jonas Stillhard

en: forest carpathian-biosphere-reserve stand-inventory-data forest-dynamics long-term-data-sets fagus-sylvatica forest-structure permanent-forest-plot-data dem primeval-beech-forest

en: Dataset

en: Data description

en: Available online on publishers website

en:
In 2000, a permanent forest plot of 10 ha has been established in the core zone of the primeval beech forest of Uholka.
 All living and dead trees with a diameter at breast height (DBH) ≥ 60 mm were identified to species, DBH measured, stems tagged and mapped.
Since then, the plot has been remeasured in 2005, 2010, and 2015. In total, 4,820 individual trees were measured with 14,116 individual measurements throughout all four inventories.
In spring 2018, an Airborne Laser Scan was carried out, covering the Uholka‐Shyrokyi Luh forest. This data set allows us to derive a high‐resolution digital elevation model (DEM) of the plot area.
The data set allows for important insights into the development and the spatial and temporal dynamics of primeval beech forests.

carpathian-biosphere-reserve

display_name: carpathian-biosphere-reserve

dem

display_name: dem

fagus-sylvatica

display_name: fagus-sylvatica

forest

display_name: forest

forest-dynamics

display_name: forest-dynamics

forest-structure

display_name: forest-structure

long-term-data-sets

display_name: long-term-data-sets

permanent-forest-plot-data

display_name: permanent-forest-plot-data

primeval-beech-forest

display_name: primeval-beech-forest

stand-inventory-data

display_name: stand-inventory-data

en: Stand inventory data from the 10‐ha forest research plot in Uholka, Ukraine