maintainer: Elisabeth Hafner

en: natural-hazard snow avalanche satellite hazard-mapping

en: SPOT6 Avalanche Outlines 16 January 2019

en: Shapefile of the manually mapped avalanche outlines. Please only use this data together with the example key document provided with this dataset and within the limitations of the dataset described in the publications.

en:
Outlines of 6'041 avalanches mapped from SPOT6 satellite data over the Swiss Alps on 16 January 2019. The dataset was acquired following a period with very high avalanche danger. The outlines have different attributes described in the data example key (ExampleKey_AvalMapping16012019.pdf)

The generation of the data is described in:

Bühler, Y., E. D. Hafner, B. Zweifel, M. Zesiger, and H. Heisig (2019), Where are the avalanches? Rapid SPOT6 satellite data acquisition to map an extreme avalanche period over the Swiss Alps, The Cryosphere, 13(12), 3225-3238, doi:10.5194/tc-13-3225-2019.

The data was comprehensivly validated in a subset area in

Hafner, E.D.; Techel, F.; Leinss, S.; Bühler, Y., 2021: Mapping avalanches with satellites - evaluation of performance and completeness. Cryosphere, 15, 2: 983-1004. doi: 10.5194/tc-15-983-2021

avalanche

display_name: avalanche

hazard-mapping

display_name: hazard-mapping

natural-hazard

display_name: natural-hazard

satellite

display_name: satellite

snow

display_name: snow

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: SPOT6 Avalanche outlines 16 January 2019


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: meteorological-measurements davos dischma-catchment meteo-station soil-moisture

state: active

type: dataset

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

format: SERVICE

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: IRKIS Soil moisture measurements Davos


en: cavity-nesting life-history-traits urban-ecology hymennoptera bees cities hymenoptera wasps richness performance-traits urbanization natural-enemies

en: Information on the study sites

media_type: text/csv

en: For each site, the IDs, city, coordinates, structure where the trapnest was attached and height is provided

format: CSV

en: Performance traits and life-history traits

en:
It contains the data of two performance traits (survival and parasitism) and two life-history traits (sex ratio and number of offspring per nest for the hosts) at the nest level.

We assessed performance traits, i.e. survival and parasitism, at the individual cell level. Specifically, for each cell within a nest, we noted whether the cell was alive or dead (survival), and whether it had a parasite or not (parasitism). Further, we calculated the parasitism rate as the number of cells with a parasite divided by the total number of cells. Concerning life-history traits, we calculated the total number of brood cells per nest as the total number of brood cells within a single nest, regardless of whether the larvae were dead, alive or parasitized. Finally, we used the probability that a femalehost emerged from a given cell as a proxy for the sex ratio. To do so, we first identified the sex of the individual hosts. Then, we noted it in a binary way to indicate whether the host was a female or not. We could identify the sex of all hatched hosts. Further, because CNBW first lay females and then males, on some occasions we could also identify the host sex in dead and parasitized cells, that is, when we had already identified the sex of the preceding and the following cells.

en: Taxonomic metrics on the natural enemies

en: It contains the species richness and the abundance of natural enemies per site.

en: Predictors of the study

en: Taxonomic metrics on CNBW

en:
The data contains at the site level the species richness of cavity-nesting bees and wasps. It also contains site level estimates of the life-history traits and the performance traits.

We calculated species richness, abundance, and number of nests of the hatched hosts separately for bees and wasps. We calculated the abundance of hatched hosts as the number of brood cells where an individual emerged, i.e. the total number of brood cells minus the number of parasitized cells and the number of cells with no emergence for reasons other than parasitism.

City codes: An =Antwerp, Pa = Paris; Po = Poznan; Ta =Tartu; Zu= Zurich

en:
 Background
Urban ecosystems are associated with socio-ecological conditions that can filter and promote taxa. However, the strength of the effect of ecological filtering on biodiversity could vary among biotic and abiotic factors. Here, we provide the data used to investigate the effects of habitat amount, temperature, and host-enemy biotic interactions in shaping communities of cavity-nesting bees and wasps (CNBW) and their natural enemies. To do so, we installed trap-nests in 80 sites distributed along urban intensity gradients in 5 European cities (Antwerp, Paris, Poznan, Tartu and Zurich). We quantified the species richness and abundance of CNBW hosts and their natural enemies, as well as two performance traits (survival and parasitism) and two life-history traits (sex ratio and number of offspring per nest for the hosts).
The dataset contains:
* The taxonomic metrics on CNBW
* The taxonomic metrics on the natural enemies from CNBW
* The life-history traits and performance traits

bees

display_name: bees

cavity-nesting

display_name: cavity-nesting

cities

display_name: cities

hymennoptera

display_name: hymennoptera

hymenoptera

display_name: hymenoptera

life-history-traits

display_name: life-history-traits

natural-enemies

display_name: natural-enemies

performance-traits

display_name: performance-traits

richness

display_name: richness

urban-ecology

display_name: urban-ecology

urbanization

display_name: urbanization

wasps

display_name: wasps

en: Community structure, life-history traits and performance traits of urban cavity-nesting bees annd wasps


maintainer: EnviDat Support

en: soil-biodiversity yellowstone detritus biogeochemical-cycling carrion wolf bacteria decomposition carcass fungi

en:
Site	ID for different carcasses across the Yellowstone Landscape
Location	Sampling location, either under carcass or control plot
Species	Indicating whether carcass was from bison or elk
Gender	Gener of carcass; F = female, M = male, ? = unknown
Lat	Latitude
Long	Longitude
DSK	Days since kill; in days
Soil.N	Soil N concentration (%)
Soil.C	Soil C concentration (%)
Veg.C	Vegetation C concentration (%); dominant grasses sampled
Veg.N	Vegetation N concentration (%); dominant grasses sampled
Veg.CtoN	Vegetation C to N ratio; dominant grasses sampled
Soil.resp	Soil respiration (g m-2 h-1)
soil.temp	Soil temperature (°C)
Soil.moist	Soil moisture (volumentric; %)
CRR	Cotton rotting rate
bacteria.richness	Bacteria richness
bacteria.diversity	Bacteria diverstiy
fungi.richness	Fungi richness
fungi.diversity	Fungi diversity
bacteria.abundance	Bacteria abundance
fungi.abundance	Fungi abundance

format: XLS

en:
This dataset contains all data on which the following publication below is based.

Paper Citation:

Risch, A.C., Frossard, A., Schütz, M., Frey, B., Morris, A.W., Bump, J.K. (accepted) Effects of elk and bison carcasses on soil microbial communities and ecosystem functions in Yellowstone, USA. (accepted). Functional Ecology
doi: ...

Methods
Study area and study sites
This study was conducted in YNP’s Northern Range (NR), located in north-western Wyoming and south-western Montana, USA (~44.9163° N, 110.4169° W). The NR expands over ~1000 km2 and features long cold winters and short dry summers. Grasslands and shrublands dominate the NR that is the home of large migratory herds of bison (winter counts 2017: ~3919 individuals; Geremia, Wallen, & White, 2017) and elk (~5349 individuals) as well as their main predators, approximately five packs of wolves with a total of 33 individuals (Smith et al., 2017). As part of a long-term research program within YNP, wolf predation has been studied since their reintroduction in 1995.
For our study, we received ground-truthed coordinates of bison and elk carcasses from winter 2016/17 (November 2016 through April 2017) from the YNP Wolf Project. Between June 20 and July 1, 2017, we visited 24 carcasses in total. At five sites, we could not sample as the carcasses were no longer found. In total we located remains (hairmats, rumen content, bones, teeth) of 19 adult male and female carcasses (7 bison, 12 elk; Supplementary Table 1). Live body weights of adult bison and elk are approximately 730 kg (male bison), 450 kg (female bison), 330 kg (male elk), and 235 kg (female elk, Meagher, 1973; Quimby & Johnson, 1951).
The kills and subsequent consumption happened between 34 and 173 days prior to our sampling (hereafter “days since kill”, DSK), for which we accounted in our statistics. Note that wolves and other scavengers consumed the soft tissue of the carcasses quickly, hence, there is close to no soft tissue left for decomposition as compared to an intact body left on the soil surface. The 19 carcass sites covered the extent of YNP’s NR, with both bison and elk carcasses showing similar distributions; elevation ranged from 1703 to 2884 m a.s.l. (Supplementary Fig 1 & Supplementary Table 1). The carcasses were all located in grassland or sage-brush shrubland, with or without sparsely scattered trees, and both bison and elk carcasses showed the same distribution of DSK. At each study site, we selected a reference plot (hereafter “control”) that was of comparable size, slope aspect and vegetation to the carcass location (hereafter “carcass”). The control was at least 10 m away (Danell, Berteaux, & Brathen, 2002; Melis et al., 2007) from the carcass itself to ensure the absence of potential direct and indirect carcass effects (paired design; (Bump, Webster, et al., 2009; Bump, Peterson, et al., 2009).

Ecosystem functions and soil properties
We randomly collected 50 g of mineral soil from three locations on both control and carcass plots to a depth of 5 cm with sterile techniques and gently mixed the material to obtain a composite sample. Half the soil sample was immediately bagged in plastic bags (whirl packs), stored in a cooler with ice packs (~5 ºC), sieved (2-mm) and frozen within 4-6 hours of collection to assess soil microbial communities. For this purpose, we extracted total genomic DNA from 0.5 g soil using the PowerSoil DNA Isolation Kit (Qiagen, Hilden, Germany). DNA concentrations were measured using PicoGreen (Molecular Probes, Eugene, OR, USA). PCR amplifications of partial bacterial small-subunit ribosomal RNA genes (region V3–V4 of 16S rRNA) and fungal ribosomal internal transcribed spacers (region ITS2) were performed as described previously (Frey et al., 2016). Each sample consisting of 40 ng DNA was amplified in triplicate and pooled before purification with Agencourt AMPure XP beads (Beckman Colter, Berea, CA, USA) and quantified with the Qubit 2.0 fluorometric system (Life Technologies, Paisley, UK). Amplicons were sent to the Genome Quebec Innovation Center (Montreal, Canada) for barcoding using the Fluidigm Access Array technology and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, CA, USA).
Quality control of bacterial and fungal reads was performed using a customized pipeline (Supplementary Table 2; Frey et al., 2016). Paired-ends reads were matched with USEARCH (Edgar & Flyvbjerg, 2015), substitution errors were corrected using Bayeshammer (Nikolenko, Korobeynikov, & Alekseyev, 2013) and PCR primers were trimmed (allowing for 1 mismatch, read length >300 bp for 16S and >200 bp for ITS primers) using Cutadapt (M. Martin, 2011). Sequences were dereplicated and singleton reads removed prior to clustering into operational taxonomic units (OTUs) at 97% identity using USEARCH (Edgar, 2013). The remaining centroid sequences were tested for the presence of ribosomal signatures using Metaxa2 (Bengtsson-Palme et al., 2015) or ITSx (Bengtsson-Palme et al., 2013). Taxonomic assignments of the OTUs were obtained using Bayesian classifier (Wang, Garrity, Tiedje, & Cole, 2007) with a minimum bootstrap support of 60% implemented in mothur (Schloss et al., 2009) by querying the bacterial and fungal reads against the SILVA Release 128 (Quast et al., 2013) and UNITE 8.0 (Abarenkov et al., 2010) reference databases for 16S and ITS OTUs, respectively.
Abundances of the bacterial 16S rRNA gene and fungal ITS amplicon were determined by quantitative real-time PCR (qPCR) on an ABI7500 Fast Real-Time PCR system (Applied Biosystems, Foster City, CA, USA) as described previously (Frossard et al., 2018). The same primers (without barcodes) and cycling conditions as for the sequencing approach were used for the 16S and ITS qPCR. Three standard curves per target region were obtained using tenfold serial dilutions of plasmids generated from cloned targets (Frey, Niklaus, Kremer, Lüscher, & Zimmermann, 2011). Data were converted to represent mean copy number of targets per gram of soil (dry weight).
The other half of the soil sample was bagged in paper, dried to constant weight at 60°C, passed through a 2 mm sieve and analyzed for total C and N concentration with a CE Instruments NC 2100 soil analyzer (CE Elantech Inc., Lakewood NJ, USA). We also collected 20 mature and undamaged leaves of the dominant grass species growing on control and carcass sites, but taxa were not recorded. The plant material was dried at 60°C, finely ground till homogenized and also analyzed to obtain total C and N concentrations. Soil temperature (10 cm depth) was measured with a waterproof digital thermometer (Barnstead International, Dubuque IA, USA) at three locations each at the control and carcass site. Soil moisture (0 – 10 cm depth) was measured with time domain reflectometry (Field-Scout TDR-100; Spectrum Technologies, Plainfield IL, USA) at five randomly chosen points on control and carcass sites. We measured soil respiration at five randomly chosen points at both control and carcass sites with a PP-Systems SRC-1 soil respiration chamber (closed circuit) attached to a PP-Systems EGM-4 infrared gas analyzer (PP-Systems, Amesbury, MA, USA). For each measurement the soil chamber (15 cm high; 10 cm diameter) was tightly placed on the soil surface, after clipping plants to avoid measuring plant respiration or photosynthesis. Measurements were conducted over 120 s.
In addition, we assessed the decomposition rates of standardized OM using the cotton strip assay (Latter & Howson, 1977; Latter & Walton, 1988). Cotton cloth tensile strength loss (CTSL) is a measure of decomposition, and an index to express the combined effect of soil microclimatic, physical, chemical and biological properties on decomposition while accounting for OM quality (Latter & Walton, 1988; Risch, Jurgensen, & Frank, 2007; Withington & Sanford Jr., 2007). We placed five 20 cm wide x 13 cm long sheets of 100% unbleached cotton cloth (American Type SM 1/18’’, Warp: 34/1, Weft: 20/1, Weave plain, 29.5 picks/cm warp, 22 picks/cm weft, 237 g/m2; Daniel Jenny & Co., Switzerland;) at each carcass and control site vertically into the soil by making slits with a flat spade to a depth of 12 cm. We inserted each cloth with the spade, and then pushed the slit closed to assure tight contact with the soil. The cloths were retrieved after 18 to 27 days. After retrieval, the cloths were air-dried, remaining soil gently removed by hand, and 1.5 cm wide strips were cut at the 3.5-5.0 cm (top) and the 9-10.5 cm (bottom) soil depth. The strips were equilibrated at 50 % relative humidity and 20°C for 48 hours (climate chamber) prior to strength testing (Scanpro Awetron TH-1 tensile strength tester; AB Lorentzen and Wettre, Kista, Sweden). Cotton rotting rate (CRR) = (CTScontrol - CTSfinal/CTSfinal)1/3 * (365/t), where CTScontrol is the cotton tensile strength of a control cloth and CTSfinal the cotton tensile strength of the incubated sample, t is the incubation period in days. Control cloths were inserted into the ground and immediately retrieved to account for tensile strength loss associated with cloth insertion. We averaged the CRR of top and bottom strips for further analyses as no difference was found between the two. All sampling and cloth insertion took place between June 20 and July 1, 2017, cloths were retrieved between July 17 and 20, 2017. Soil respiration, average CRR, vegetation N concentration and vegetation C:N ratio are defined as ecosystem functions, soil C and N concentration, soil temperature and moisture as soil abiotic properties, and bacterial and fungal richness (number of taxa), diversity (Shannon) and abundance as soil biotic properties.

Statistical analyses
Univariate analyses for ecosystem functions, soil biotic and abiotic properties
We tested whether individual ecosystem functions, soil biotic and abiotic properties differed between carcass and control (“Location”), bison and elk (“Species”) and days since kill (“DSK”). For this purpose, we used linear mixed effect models (LMM, “nlme” package v 3.1 – 131.1 in R v 3.4.4; Pinheiro, Bates, DebRoy, & Sarkar, 2018; R Core Team, 2019) with Location, Species, Location x Species and DSK as fixed effects. Site was included as random effect to account for the paired design. We developed a separate model for all dependent variables. All but bacterial richness, fungal richness, fungal diversity and vegetation N concentration were natural-log transformed to meet model assumptions. For each LMM, we calculated contrasts to assess the specific comparisons we were interested in with the “lsmeans” package v 2.27-62 (Lenth & Love, 2018): 1) carcass vs control, 2) carcass bison vs control bison, and 3) carcass elk vs control elk. We also tested whether we had differences between bison and elk carcasses or the sites where bison and elk were killed and included contrasts 4) carcass bison vs carcass elk and 5) control bison vs control elk.
We calculated the log response ratio (LRR = ln[carcass/control]) to obtain carcass effects for all variables for both species separately. LRR < 0 indicates higher value at control compared to carcass, LRR > 0 indicates higher values at carcass compared control. We used LRRs for visualization and to assess spatial patterns in carcass effects across YNP. For this purpose we calculated the Moran’s I statistic for each ecosystem function, soil biotic and abiotic property based on a latitude-longitude matrix with the “moran.test” function in the “spdep” package version 1.1-3 (Bivand et al., 2019).
Multivariate analyses
Rare OTUs, defined as OTUs with a low abundance of reads, were retained in multivariate methods because they only marginally influence these analyses (Gobet, Quince, & Ramette, 2010). Bray–Curtis dissimilarity matrices were generated based on square-root-transformed matrices. We used Principal Coordinate Analyses (PCoA) to assess how soil bacterial and fungal communities differed between control and carcass of bison and elk (“vegan” package v 2.5-4, Oksanen et al., 2019). We then extracted PCoA axes scores 1 and 2 and used LMM (“nlme” package) with Location, Species, Location x Species and DSK as fixed effects. Site was, again, included as random effect. We again calculated the contrasts as described above using the “lsmeans” package. We also assessed how ecosystem functions, and soil abiotic and biotic properties were related to the soil bacteria and fungi community structure associated with bison and elk control and carcasses using the “envfit” function in the “vegan” package (Oksanen et al., 2019).
Indicator species analyses were performed using the multipatt function implemented in the “indicspecies” package version 1.7.6 with 100000 permutations (De Caceres & Jansen, 2016). This step allowed to identify OTUs that led to changes in multivariate patterns between control and carcass of both bison and elk separately (De Cáceres, Legendre, & Moretti, 2010). The multipatt function uses a point biserial correlation coefficient statistical test. Indicator OTUs were defined as bacterial and fungal OTUs with more than 50 sequences, i.e., removing rare taxa and taxa with low abundances containing little indicator information (Rime et al., 2015) and that were significantly correlated with Location (p < 0.05, correlation coefficient > 0.3). A heatmap of these OTUs were generated with the vegan and ggplot2 packages. The indicator analyses were performed in R version 3.3.3 (R Core Team, 2017).

References
Abarenkov, K., Henrik Nilsson, R., Larsson, K.-H., Alexander, I. J., Eberhardt, U., Erland, S., … Kõljalg, U. (2010). The UNITE database for molecular identification of fungi – recent updates and future perspectives. New Phytologist, 186(2), 281–285. doi:10.1111/j.1469-8137.2009.03160.x
Bengtsson-Palme, J., Hartmann, M., Eriksson, K. M., Pal, C., Thorell, K., Larsson, D. G. J., & Nilsson, R. H. (2015). metaxa2: improved identification and taxonomic classification of small and large subunit rRNA in metagenomic data. Molecular Ecology Resources, 15(6), 1403–1414. doi:10.1111/1755-0998.12399
Bengtsson-Palme, J., Ryberg, M., Hartmann, M., Branco, S., Wang, Z., Godhe, A., … Nilsson, R. H. (2013). Improved software detection and extraction of ITS1 and ITS2 from ribosomal ITS sequences of fungi and other eukaryotes for analysis of environmental sequencing data. Methods in Ecology and Evolution, 4(10), 914–919. doi:10.1111/2041-210X.12073
Bivand, R., Altman, M., Anselin, L., Assuncao, R., Berke, O., Blanchet, G., … Yu, D. (2019). spdep: Spatial dependence, weighthing schemes, statistics. R package version 1.1-3.
Bump, J. K., Peterson, R. O., & Vucetich, J. A. (2009). Wolves modulate soil nutrient heterogeneity and foliar nitrogen by configuring the distribution of ungulate carcasses. Ecology, 90(11), 3159–3167.
Bump, J. K., Webster, C. R., Vucetich, J. A., Peterson, R. O., Shields, J. M., & Powers, M. D. (2009). Ungulate carcasses perforate ecological filters and create biogeochemical hotspots in forest herbaceous layers allowing trees a competitive advantage. Ecosystems, 12(6), 996–1007. doi:10.1007/s10021-009-9274-0
Danell, K., Berteaux, D., & Brathen, K. A. (2002). Effect of muskox carcasses on nitrogen concentration in tundra vegetation. Arctic, 55(4), 389392.
De Caceres, M., & Jansen, F. (2016). indicspecies: relationship between species and groups of species. R package version 1.7.6.
De Cáceres, M., Legendre, P., & Moretti, M. (2010). Improving indicator species analysis by combining groups of sites. Oikos, 119(10), 1674–1684. doi:10.1111/j.1600-0706.2010.18334.x
Edgar, R. C. (2013). UPARSE: highly accurate OTU sequences from microbial amplicon reads. Nature Methods, 10, 996.
Edgar, R. C., & Flyvbjerg, H. (2015). Error filtering, pair assembly and error correction for next-generation sequencing reads. Bioinformatics, 31(21), 3476–3482. doi:10.1093/bioinformatics/btv401
Frey, B., Niklaus, P. A., Kremer, J., Lüscher, P., & Zimmermann, S. (2011). Heavy-machinery traffic impacts methane emissions as well as methanogen abundance and community structure in oxic forest soils. Applied and Environmental Microbiology, 77(17), 6060–6068. doi:10.1128/AEM.05206-11
Frey, B., Rime, T., Phillips, M., Stierli, B., Hajdas, I., Widmer, F., & Hartmann, M. (2016). Microbial diversity in European alpine permafrost and active layers. FEMS Microbial Ecology, 92(3), fiw018.
Frossard, A., Donhauser, J., Mestrot, A., Gygax, S., Bååth, E., & Frey, B. (2018). Long- and short-term effects of mercury pollution on the soil microbiome. Soil Biology and Biochemistry, 120, 191–199. doi:https://doi.org/10.1016/j.soilbio.2018.01.028
Geremia, C., Wallen, R., & White, P. J. (2017). Status report of the Yellowstone bison population, September 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center for Resources.
Gobet, A., Quince, C., & Ramette, A. (2010). Multivariate cutoff level analysis (MultiCoLA) of large community data sets. Nucleic Acids Research, 38(15), e155–e155. doi:10.1093/nar/gkq545
Latter, P., & Howson, G. (1977). The use of cotton strips to indicate cellulose decomposition in the field. Pedobiologia, (17), 145–155.
Latter, P., & Walton, D. (1988). The cotton strip assay for cellulose decomposition studies in soil: history of the assay and development. In Cotton strip assay: an index for decomposition in soils (pp. 7–9). ITE Symposium, Institute of Terrestrial Ecology, Natural Environment Research Council, UK.
Lenth, R., & Love, J. (2018). lsmeans: least-squares means. R package version 2.27-62.
Martin, M. (2011). Cutadapt removes adapter sequences from high-throughput sequencing reads. EMBnet.Journal, 17(1), 10–12.
Meagher, M. M. (1973). The bison of Yellowstone National Park. NPS Scientific Monograph (Vol. 1). National Park Service, Yellowstone Center for Resources.
Melis, C., Selva, N., Teurlings, I., Skarpe, C., Linnell, J. D. C., & Andersen, R. (2007). Soil and vegetation nutrient response to bison carcasses in Białowieża Primeval Forest, Poland. Ecological Research, 22(5), 807–813. doi:10.1007/s11284-006-0321-4
Nikolenko, S. I., Korobeynikov, A. I., & Alekseyev, M. A. (2013). BayesHammer: Bayesian clustering for error correction in single-cell sequencing. BMC Genomics, 14(1), S7. doi:10.1186/1471-2164-14-S1-S7
Oksanen, J., Blanchet, F. G., Friendly, M., Kindt, R., Legendre, P., McGlinn, D., … Wagner, H. H. (2019). vegan: community ecology package. R package version 2.5-4.
Pinheiro, J., Bates, D., DebRoy, S., & Sarkar, D. (2018). nlme: Linear and nonlinear mixed effect models. R package version 3.1-131.1.
Quast, C., Pruesse, E., Yilmaz, P., Gerken, J., Schweer, T., Yarza, P., … Glöckner, F. O. (2013). The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research, 41(Database issue), D590–D596. doi:10.1093/nar/gks1219
Quimby, D. C., & Johnson, D. E. (1951). Weights and measurements of Rocky Mountain elk. Journal of Wildlife Management, 15, 57–62.
R Core Team. (2017). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Zurich, Switzerland.
R Core Team. (2019). R: A language and environment for statistical computing. Vienna, Austria: R Foundation for Statistical Computing.
Rime, T., Hartmann, M., Brunner, I., Widmer, F., Zeyer, J., & Frey, B. (2015). Vertical distribution of the soil microbiota along a successional gradient in a glacier forefield. Molecular Ecology, 24(5), 1091–1108. doi:10.1111/mec.13051
Risch, A. C., Jurgensen, M. F., & Frank, D. A. (2007). Effects of grazing and soil micro-climate on decomposition rates in a spatio-temporally heterogeneous grassland. Plant and Soil, 298(1–2), 191–201. doi:10.1007/s11104-007-9354-x
Schloss, P. D., Westcott, S. L., Ryabin, T., Hall, J. R., Hartmann, M., Hollister, E. B., … Weber, C. F. (2009). Introducing mothur: open-source, platform-independent, community-supported software for describing and comparing microbial communities. Applied and Environmental Microbiology, 75(23), 7537–7541. doi:10.1128/AEM.01541-09
Smith, D., Stahler, D., Cassidy, K., Stahler, E., Metz, M., Cassidy, B., … Cato, E. (2018). Yellowstone National Park wolf project annual report 2017. Yellowstone National Park, Mammoth, WY, USA: National Park Service, Yellowstone Center of Resources.
Wang, Q., Garrity, G. M., Tiedje, J. M., & Cole, J. R. (2007). Naive Bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy. Applied and Environmental Microbiology, 73(16), 5261–5267. doi:10.1128/AEM.00062-07
Withington, C., & Sanford Jr., R. (2007). Decomposition rates of buried substances increase with altitude in a forest-alpine tundra ecotone. Soil Biology and Biochemistry, (39), 68–75.

Please cite this paper together with the citation for the datafile.

bacteria

display_name: bacteria

biogeochemical-cycling

display_name: biogeochemical-cycling

carcass

display_name: carcass

carrion

display_name: carrion

decomposition

display_name: decomposition

detritus

display_name: detritus

fungi

display_name: fungi

soil-biodiversity

display_name: soil-biodiversity

wolf

display_name: wolf

yellowstone

display_name: yellowstone

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Elk and bison carcasses in Yellowstone, USA


maintainer: Dominique Weber

en: grassland mowing land-use management landsat remote-sensing use-intensity sentinel-2

en: Readme

media_type: text/plain

en: Metadata and description of the maps and webcam-based reference data.

format: TXT

en: Preview time of 1st grassland management event 2020

media_type: image/png

en: Spatial distribution of the timing (day of year; DOY) of the first management event for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the timing of the first event of the year (Weber et al., 2023; IN REVIEW)

format: PNG

en: Grassland-use intensity map 2018

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2018. See readme file for more details.

format: GeoTIFF

en: Grassland-use intensity map 2020

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2020. See readme file for more details.

en: Preview number of grassland management events 2020

en: Spatial distribution of the number of management events for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the distribution of management frequency (Weber et al., 2023; IN REVIEW)

en: Webcam-based reference data

en: Webcam-based reference data from 2020 and 2021 (see readme).

en: Grassland-use intensity map 2019

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2019. See readme file for more details.

en: Grassland-use intensity map 2021

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2021. See readme file for more details.

en:
A rule-based algorithm [(Schwieder et al., 2022)](https://doi.org/10.1016/j.rse.2021.112795) was used to produce annual maps for 2018–2021 of grassland-management events, i.e. mowing and/or grazing, for Switzerland using Sentinel-2 and Landsat 8 satellite time series. All satellite images were processed with the [FORCE](https://force-eo.readthedocs.io) framework.

The resulting maps provide information on the number and timing of grassland-management events at a spatial resolution of 10 m × 10 m for the whole of Switzerland. For the final maps, permanent grasslands were masked using a variety of land-use layers, according to [Huber et al. (2022)](https://doi.org/10.1002/rse2.298) but replacing the crop mask with the agricultural-use data from the cantons.

We assessed the detection of management events based on independent reference data, which we acquired from daily time series of publicly available webcams that are widely distributed across Switzerland. We further tested the ecological relevance of the generated intensity measures in relation to nationwide biodiversity data (see [Weber et al., 2023](https://doi.org/10.1002/rse2.372)).

The webcam-based reference data used for verification was subsequently added on 14.02.2024.

grassland

display_name: grassland

land-use

display_name: land-use

landsat

display_name: landsat

management

display_name: management

mowing

display_name: mowing

remote-sensing

display_name: remote-sensing

use-intensity

display_name: use-intensity

educ

en: Education, culture and sport

en: Grassland-use intensity maps for Switzerland


en: branchwood section-wise-diameter growing-stock tree-volume allometry stemwood

media_type: application/pdf

en: additional background information on this work

format: PDF

en: definitions of data in columns contained in the dataset Stem&Branchchwood_2024-02-29.txt

en: Updated dataset of outdated_Stem&Branchchwood_2024-02-29.txt, including corrections to the assignment of tree species to NFI main species and location information for two additional sites.

en: Revised version of the initial submission StemBranchwood_Didionetal_initialsubmission.pdf after review.

en: dataset with section-wise stem diameter and branchwood volume measurements. For column definitions see Column_definitions.pdf.

en: manuscript submitted for publication.

en:
The data presented here were prepared for publication in form of a data paper. The dataset presents an update of the information in Didion M, Herold A, Vulovic Z, Nitzsche J, Stillhard J (2022) Datasets for deriving functions for the stem- and branchwood volume in the Swiss National Forest Inventory. EnviDat. doi:https://www.doi.org/10.16904/envidat.358. The new dataset is based on an alternative, more accurate and comprehensive dataset, that was identified as the source of the dataset in Didion et al. 2022. It includes additional data, including newly digitized information.
The dataset includes section-wise stem measurements on 40’349 felled individual trees and empirically derived coarse (diameter >= 7 cm) and fine branch volume of 27’297 and 18’980, respectively, individual trees. The data were collected between 1888 and 1974 across Switzerland covering a large topographic gradient and a diverse species range. The dataset has undergone quality controls and due to its origin from 768 plots of the Experimental Forest Management project long-term consistency is assured.

allometry

display_name: allometry

branchwood

display_name: branchwood

growing-stock

display_name: growing-stock

section-wise-diameter

display_name: section-wise-diameter

stemwood

display_name: stemwood

tree-volume

display_name: tree-volume

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: A dataset of 40000 trees with section-wise measured stem diameter and length and volume of branches from across Switzerland


weather-station-klosters

maintainer: Maxime Hervo

title_for_slug: weather-station-klosters

en: temperature wind weather precipitation klosters raclets

en: Weather Station Klosters

media_type: application/zip

en: All in one weather station measuring temperature (°C), humidity (%), wind (m s‾ ¹) and precipitation type. The time format is: number of days from January 0, 0000, UTC.

format: ZIP

mimetype: application/zip

en: A weather station (Lufft WS600) measured meteorological parameters at Klosters (LON: 9.880413, LAT: 46.869019). Detailed information on the specifications can be found [here](https://www.lufft.com/products/compact-weather-sensors-293/ws600-umb-smart-weather-sensor-1832/productAction/outputAsPdf/).

klosters

display_name: klosters

precipitation

display_name: precipitation

raclets

display_name: raclets

temperature

display_name: temperature

weather

display_name: weather

wind

display_name: wind


maintainer: Sofia Pagliarin

en: urban-atlas milan soil-sealing imperviousness copernicus barcelona

en: Information on data sources

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas

educ

en: Education, culture and sport

en: Soil sealing Barcelona and Milan different territorial levels


distributed-acoustic-sensing-brienz

title_for_slug: distributed-acoustic-sensing-brienz

en: seismic early-warning machine-learning landslide natural-hazard rockfall

en: Data access

en:
This dataset contains the Distributed Acoustic Sensing (DAS), radar detection data used for training and result analysis in the GRL paper titled `Automatic Monitoring of Rock-Slope Failures Using Distributed Acoustic Sensing and Semi-Supervised Learning`.
The DAS dataset (both waveform and cross-spectral density matrices), extracted features, labeled dataset, two trained models (feature extraction model and xgboost classification model), scripts to reproduce the whole training and classification processes, and a notebook to replicate the result analysis part are provided under the MIT license. To provide a reasonable data size, we chunked the raw data to a few hundred channels which we used in our project.
Abstract:
Effective use of the wealth of information provided by Distributed Acoustic Sensing (DAS) for mass movement monitoring remains a challenge. We propose a semi-supervised neural network tailored to screen DAS data related to a series of rock collapses leading to a major failure of approximately 1.2 million cubic meters on 15 June 2023 in Brienz, Eastern Switzerland. Besides DAS, the dataset from 16 May to 30 June 2023 includes Doppler radar data for partially ground-truth labeling. The proposed algorithm is capable of distinguishing between rock-slope failures and background noise, including road and train traffic, with a detection precision of over 95%. It identifies hundreds of precursory failures and shows sustained detection hours before and during the major collapse. Event size and signal-to-noise ratio (SNR) are the key performance dependencies. As a critical part of our algorithm operates unsupervised, we suggest that it is suitable for general monitoring of natural hazards.

early-warning

display_name: early-warning

landslide

display_name: landslide

machine-learning

display_name: machine-learning

natural-hazard

display_name: natural-hazard

rockfall

display_name: rockfall

seismic

display_name: seismic

en: Distributed Acoustic Sensing Brienz


swiss-fluxnet-site-lageren

title_for_slug: swiss-fluxnet-site-lageren

en: forest greenhouse-gas eddy-covariance swiss-fluxnet swiss-forest-lab flux meteorological-measurements

en: The flux and meteo data of the Swiss FluxNet site Lägeren are openly available from the European Fluxes Database Cluster.

en: Site description

en:
The Swiss FluxNet Site Lägeren is a managed mixed deciduous mountain forest located on the steep Lägeren mountain (NW of Zurich, Swiss Plateau). The forest is highly diverse, dominated by beech, but also including ash, maple, spruce and fir trees. Eddy covariance flux measurements were started in April 2004. The site was part of the international CarboEurope IP network and the National Air Pollution Monitoring Network (NABEL). In addition to Swiss FluxNet, the site is part of the Long-term Forest Ecosystem Research (LWF) of WSL and the biological drought and growth indicator network (TreeNet) of WSL.

Measurements

- Ecosystem flux measurements of CO2, H2O vapour are performed with the eddy-covariance method. This method is based on measurements of trace gas mixing ratios, using infrared gas analyzers (for CO2, H2O vapor), combined with wind speed and wind direction measurements, using 3D sonic anemometers. To resolve the short-term turbulent fluctuations in the atmosphere, very fast measurements are needed: we measure at 10-20 Hz, i.e., 10-20 times per second. To assess the energy budget of each ecosystem, also radiation sensors and soil climate profiles are installed at the site.
- Sub-canopy eddy fluxes (CO2, H2O), soil respiration campaigns
- Continuous CO2 profile measurements.
- Auxiliary micrometeorology and soil climate measurements.

Data availability

All data are available from the European Fluxes Database Cluster, but are also part of Fluxnet2015 dataset.

Data policy

ICOS data license:
[https://www.icos-cp.eu/data-services/about-data-portal/data-license](https://www.icos-cp.eu/data-services/about-data-portal/data-license)

Detailed site info:
[https://www.swissfluxnet.ethz.ch/index.php/sites/ch-lae-laegeren/site-info-ch-lae//](https://www.swissfluxnet.ethz.ch/index.php/sites/ch-lae-laegeren/site-info-ch-lae/)

eddy-covariance

display_name: eddy-covariance

flux

display_name: flux

forest

display_name: forest

greenhouse-gas

display_name: greenhouse-gas

meteorological-measurements

display_name: meteorological-measurements

swiss-fluxnet

display_name: swiss-fluxnet

swiss-forest-lab

display_name: swiss-forest-lab

envidat

en: EnviDat: the Environmental Data Portal

en: Swiss FluxNet Site Lägeren


maintainer: Jonas Stillhard

en: carpathian-biosphere-reserve forest permanent-forest-plot-data forest-structure fagus-sylvatica primeval-beech-forest forest-dynamics dem stand-inventory-data long-term-data-sets

en: Dataset

en: Data description

en: Available online on publishers website

mimetype: application/pdf

en:
In 2000, a permanent forest plot of 10 ha has been established in the core zone of the primeval beech forest of Uholka.
 All living and dead trees with a diameter at breast height (DBH) ≥ 60 mm were identified to species, DBH measured, stems tagged and mapped.
Since then, the plot has been remeasured in 2005, 2010, and 2015. In total, 4,820 individual trees were measured with 14,116 individual measurements throughout all four inventories.
In spring 2018, an Airborne Laser Scan was carried out, covering the Uholka‐Shyrokyi Luh forest. This data set allows us to derive a high‐resolution digital elevation model (DEM) of the plot area.
The data set allows for important insights into the development and the spatial and temporal dynamics of primeval beech forests.

carpathian-biosphere-reserve

display_name: carpathian-biosphere-reserve

dem

display_name: dem

fagus-sylvatica

display_name: fagus-sylvatica

forest-dynamics

display_name: forest-dynamics

forest-structure

display_name: forest-structure

long-term-data-sets

display_name: long-term-data-sets

permanent-forest-plot-data

display_name: permanent-forest-plot-data

primeval-beech-forest

display_name: primeval-beech-forest

stand-inventory-data

display_name: stand-inventory-data

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Stand inventory data from the 10‐ha forest research plot in Uholka, Ukraine


automatic-classification-of-avalanches

maintainer: Alec van Herwijnen

title_for_slug: automatic-classification-of-avalanches

en: seismic localization monitoring avalanche machine-learning

en:
This tar file contains classification results for two seismic geophone arrays deployed above Davos, Switzerland. The of the first array located at the Dischma Valley was used to automatically identify all seismic events produced by avalanches, whereas the classification perfomed at the second array located at the Wannengrat field site was used to identify airplanes and earthquakes.
Furthermore, this tar file also contains the median back-azimuth of all classified events at the Dischma field site.

mimetype: application/x-tar

en: This dataset contains the classification and localization results obtained during the automatic classification of avalanches during the winter season 2017.

avalanche

display_name: avalanche

localization

display_name: localization

machine-learning

display_name: machine-learning

monitoring

display_name: monitoring

seismic

display_name: seismic

educ

en: Education, culture and sport

en: Automatic Classification of Avalanches


en: land-use-and-cover-change planning-outcome topography forest-gain spatial-modelling built-up-classification forest-persistence urban-morphology basic-services urban-compactness nature-conservation urban-sprawl

en: Increase in clean water provision service

en: Descricao dos dados em portiuguês

en: Portugues description

en: Permanent housing density increase

en: infill

en: New built-up pixels classified as infill

en: Topographic Index Position (TPI)

en: Master plan Ihabela (zones)

format: SHP

en: Increase in waste collection service

en: slope

en: Slope °

en: Human Development Index (HDI) per municipality (change per year)

en: Ecological-Economic Zoning (EEZ)

en: Increase in sanitation service

en: Urban persistence: Built-up 2005 = Built-up 2015

en: Variables description

en: Table of content. Variables description, source, and other important information

en:
Basic education in % per census sector (change per
year)

en: Mean income in Reais (R$) per census sector (change per year)

en: Master plan Ubatuba (zones)

en: Increase in Normalized Difference Vegetation Index

en: Native forest cover gains from 2005 to 2015

en: Native forest cover persistence from 2005 to 2015

en: Axial

en: New built-up pixels classified as axial

en: Population density per pixel (change per year)

en: isolated

en: New built-up pixels classified as isolated

en:
The present dataset is part of the published scientific paper entitled “The role of spatial planning in land change: An assessment of urban planning and nature conservation efficiency at the southeastern coast of Brazil” (Pierri Daunt, Inostroza and Hersperger, 2021). In this work, we evaluated the conformance of stated spatial planning goals and the outcomes in terms of urban compactness, basic services and housing provision, and nature conservation for different land-use strategies. We evaluate the 2005 Ecological-Economic Zoning (EEZ) and two municipal master plans from 2006 in a coastal region in São Paulo State, Brazil. We used Partial Least Squares Path Modelling (PLS-PM) to explain the relationship between the plan strategies and land-use change ten years after implementation in terms of urban compactness, basic services and housing increase, and nature conservation.

We acquired the data for the explanatory variables from different sources listed on Table 1. Since the model is spatially explicit, all input data were transformed to a 30 m resolution raster. Regarding the evaluated spatial plans, we acquired the zones limits from the São Paulo State Environmental Planning Division (CPLA-SP), Ilhabela and Ubatuba municipality.

1)	Land use and cover data: Urban persistence, Urban axial, Urban infill, Urban Isolates, Forest cover persistence, Forest cover gain, NDVI increase

We acquired two Landsat Collection 1 Higher-Level Surface Reflectance images distributed by the U.S. Geological Survey (USGS), covering the entire study area (paths 76 and 77, row 220, WRS-2 reference system, https://earthexplorer.usgs.gov/). We classified one image acquired by the Landsat 5 Thematic Mapper (TM) sensor on 2005-05-150, and one image from the Landsat 8 Operational Land Imager (OLI) sensor from 2015-08-15. We collected 100 samples for forest cover, 100 samples for built-up cover and 100 samples for other classes. We then classified these three classes of land cover at each image date using the Support Vector Machine (SVM) supervised algorithm (Hsu et al., 2003), using ENVI 5.0 software.

Land-use and land-cover changes from 2005 to 2015 were quantified using map algebra, by mathematically adding them together in pairs (10*LULC2015 + LULC2005). We reclassified the LULC data into forest gain (conversion of any 2005 LULC to forest cover in 2015); forest persistence (2005 forested pixels that remained forested in 2015); new built-up area (conversion of any 2005 LULC to built-up in 2015); and urban maintenance (2005 built-up pixels that remained built-up in 2015).

To describe the spatial configuration of the urban expansion, we classified the new built-up areas into axial, infill and isolated, following Inostroza et al. (2013) (For details, please refer to Supplementary Material I at the original publication).

The NDVI was obtained from the same source used for the LULC data. With the Google Engine platform, we used an annual average for the best pixels (without clouds) for 2005 and 2015, and we calculated the changes between dates. We used increases of > 0.2 NDVI to represent an improvement in forest quality.

2)	Federal Census data organization: Urban Basic Services and Housing indicator, socioeconomic and population:

The data used to infer the values of basic services provision, socioeconomic and population drivers was derived from the Brazilian National Census data (IBGE, 2000 and 2010). Population density, permanent housing unit density, mean income, basic education, and the percentage of houses receiving waste collection, sanitation and water provision services, called basic services in the context of this study, were calculated per 30 m pixel. The Human Development Index is only available at the municipality level. We attributed the HDI for the vector file with the municipality border, and we rasterized (30 m resolution) this file in QGIS. Annual rates of change were then calculated to allow comparability between LULC periods. To infer the BSH, we used only areas with an increase in permanent housing density and basic services provision (See Supplementary Material I at the original publication).

3)	Topographic drivers

To infer the values of the topographic driver, we used the slope data and the Topographic Index Position (TPI) based on the digital elevation model from SRTM (30 m resolution) produced by ALOS (freely available at eorc.jaxa.jp/ALOS/en/about/about_index.htm), and both variables were considered constant from 2005 to 2015 (See Supplementary Material I at the original publication).

basic-services

display_name: basic-services

built-up-classification

display_name: built-up-classification

forest-gain

display_name: forest-gain

forest-persistence

display_name: forest-persistence

land-use-and-cover-change

display_name: land-use-and-cover-change

nature-conservation

display_name: nature-conservation

planning-outcome

display_name: planning-outcome

spatial-modelling

display_name: spatial-modelling

topography

display_name: topography

urban-compactness

display_name: urban-compactness

urban-morphology

display_name: urban-morphology

en: Spatially explicit data to evaluate spatial planning outcomes in a coastal region in São Paulo State, Brazil


maintainer: Frank Techel

en: european-alps snow warning-regions danger-level avalanche-forecast

en: Forecast avalanche danger level

en: contains the highest forecast danger level (dangerLevelMax) for each day and warning region

mimetype: text/csv

en: shape file warning regions Alps

en:
This dataset contains the data used in the publication by Techel et al., 2018 _Spatial consistency and bias in avalanche forecasts - a case study in the European Alps_ (Nat Haz Earth Syst Sci).
For details on the data please refer to this publication.
The dataset contains the following:
- shape files for the warning regions in the Alps
- highest forecast danger level for each warning region and day

avalanche-forecast

display_name: avalanche-forecast

danger-level

display_name: danger-level

european-alps

display_name: european-alps

snow

display_name: snow

warning-regions

display_name: warning-regions

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Forecast avalanche danger level European Alps 2011 - 2015


maintainer: Yves Bühler

en: snow ramms hazard-mapping avalanche hazard-indication-mapping release

en: Potential Release  Area  NHESS

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en: RAMMS simulations NHESS

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

hazard-mapping

display_name: hazard-mapping

ramms

display_name: ramms

release

display_name: release

en: Automated Avalanche Release Area (PRA) Delineation Davos


en: meteoswiss cosmo-wrf high-resolution numerical-simulation complex-terrain

en: WPSSetup

en: Scripts that need to be changed to compile WPS (see COSMOWRFdocumentation.pdf, Section 4)

en: MeteorologicalData

en: Scripts to process meteorological data (see Section 2 in COSMOWRFdocumentation.pdf).

en: Postprocessing

en: Postprocessing scripts to map WRF output on swiss coordinates (see Section 7 in COSMOWRFdocumentation.pdf)

en: WPSrun

en: Scripts to run the WRF pre-processing (WPS) for COSMO-WRF simulation (see Section 5 in COSMOWRFdocumentation.pdf)

en: StaticData

en:
Scripts to process geographical/static data (see Section 3 in COSMOWRFdocumentation.pdf).
- ascii_to_bin_landuse.f90
- ascii_to_bin_soiltype.f90
- ascii_to_bin_topo_wgs84_ws2sf1.f90
- see_slopes.ncl
- soiltype_writing.py
- toposmooth_wgs84_cosmobound.ncl
- write_geogrid.o

en: WRFrun

en: Scripts to run COSMO-WRF simulation (see Section 6 in COSMOWRFdocumentation.pdf)

en: COSMO-WRF documentation v1.0

en:
Gerber, Franziska; Sharma, Varun (2018). Running COSMO-WRF on very-high resolution over complex terrain. EnviDat. doi:10.16904/envidat.35

Documentation about the procedure to run COSMO-WRF

en: This is a technical documentation of the procedure to run the Weather Research and Forecasting (WRF) model over complex alpine terrain using Consortium for Small-Scale Modeling (COSMO) reanalysis by the Federal Office of Meteorology and Climatology (MeteoSwiss) as initial and boundary conditions (COMSO-WRF). The setup is adapted for very high resolution simulations based on COSMO-2 (2.2 km resolution) reanalysis. This document gives an overview over steps to setup COSMO-WRF and adaptations needed to run COSMO-WRF. Additionally, the calculation of precipitation rate at a horizontal plane and remapping COSMO-WRF output on Swiss coordinates are documented.

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

high-resolution

display_name: high-resolution

meteoswiss

display_name: meteoswiss

numerical-simulation

display_name: numerical-simulation


en: occurrence plant-species uetliberg flora-change zurich

en:
The list gives the clearly identifiable plant species from Schinz (1775). Die Reise auf den Uetliberg. Verlag des Waysenhauses, Zürich). Several species given in Schinz (1775) are not identifiable to the species level and are not included in the list. Similarly, Vicia pisiformis, Erbsenartige Wicke, given by Schinz (1775) is probably a misidentification and also not included in the list.

Latin plant species name Schinz 1775: Latin plant name (if) given by Schinz (1775); na: not available
German plant species name Schinz 1775: German plant name given by Schinz (1775)
Latin plant species name Info Flora 2024: Latin plant name according to www.infoflora.ch in 2024
German plant species name Info Flora 2024: German plant name according to www.infoflora.ch in 2024
Plant species still occurring in 2020: Plant species given in Schinz (1775) still occurring at the Uetliberg in 2020 (Zürcherische Botanische Gesellschaft. 2020. Flora des Kanton Zürich. Haupt, Bern); occurrence of Thesium alpinum, Alpen-Bergflachs, according to floristic knowledge of Rolf Holderegger and Michèle Büttner; 1: still occurring; 0: no longer occurring / extinct.

en:
The list gives the clearly identifiable plant species from Schinz (1775). Die Reise auf den Uetliberg. Verlag des Waysenhauses, Zürich). Several species given in Schinz (1775) are not identifiable to the species level and are not included in the list. Similarly, *Vicia pisiformis*, Erbsenartige Wicke, given by Schinz (1775) is probably a misidentification and also not included in the list.
Latin plant species name Schinz 1775: Latin plant name (if) given by Schinz (1775); na: not available
German plant species name Schinz 1775: German plant name given by Schinz (1775)
Latin plant species name Info Flora 2024: Latin plant name according to www.infoflora.ch in 2024
German plant species name Info Flora 2024: German plant name according to www.infoflora.ch in 2024
Plant species still occurring in 2020: Plant species given in Schinz (1775) still occurring at the Uetliberg in 2020 (Zürcherische Botanische Gesellschaft. 2020. Flora des Kanton Zürich. Haupt, Bern); occurrence of *Thesium alpinum*, Alpen-Bergflachs, according to floristic knowledge of Rolf Holderegger and Michèle Büttner; 1: still occurring; 0: no longer occurring / extinct.

flora-change

display_name: flora-change

occurrence

display_name: occurrence

plant-species

display_name: plant-species

uetliberg

display_name: uetliberg

zurich

display_name: zurich

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Plant species list from 1775 and 2020 for Uetliberg Zürich


en: oshd snow-simulation land-use forest-productivity snow evapotranspiration land-cover high-resolution clm5

en: Forcing land surface datasets used for the CLM5 simulations at 1km, 0.25° and 0.5° resolution. For the 1km resolution both the standard global (LU_Gl) and the high-resolution dataset (LU_HR) are provided.

en:
12 gridded CLM5 simulations over the spatial extent of Switzerland:
- 1km, 0.25deg, 0.5deg
- 3 different meteorological forcings (Clim_CRU, CLIM_CRU*, CLIM_OSHD)
- 2 different land use forcings
each with the following outputs:
- daily snow depth (file SNOW_DEPTH.nc)
- monthly summed gross primary production (file FPSN_MONTH_SUM.nc)
- monthly summed evapotranspiration (file QFLX_EVAP_TOT_MONTH_SUM.nc).
Temporal extent of all simulations: 01/01/2015 - 31/12/2020.

en: Point-scale CLM5 simulation output of snow depth and snow water equivalent for 9 different simulation scenarios, each performed at 36 snow station locations across Switzerland. Please have a look at table A1 in the appendix of the linked publication for coordinates of the stations. Additional information on the setup, and the differences between simulation setups can also be found in the linked publication.

en:
This dataset contains Community Land Model 5 (CLM5) simulation output over the spatial extent of Switzerland at different resolutions and based on a range of input datasets. It further contains land-use surface data used for the CLM5-simulations.

**Detailed description of the CLM5 simulation setup and the various input datasets can be found in the accompanying publication: https://doi.org/10.5194/egusphere-2023-1832.**

 CLM5 simulation output

This dataset includes gridded CLM5 simulations of snow depth, gross primary productivity (GPP) and evapotranspiration at different resolutions ( 1km, 0.25° and 0.5°) and based on a range of input datasets over the spatial extent of Switzerland (see folder *gridded_CLM5_simulations*). Additionally, point-scale CLM5 simulations of snow depth and snow-water-equivalent at 36 snow-station locations (see folder *point_scale_CLM5_simulations*) are included. Latitude, longitude and elevation for these station locations can be found in table A1 of the above-mentioned publication. All simulation output spans from 01/01/2015 - 31/12/2019.

Included CLM5 simulation results are based on 3 different meteorological forcing datasets:
* Clim_CRU: standard global dataset, we used the recent state-of-the-art standrd global dataset CRU-JRA (https://catalogue.ceda.ac.uk/uuid/aed8e269513f446fb1b5d2512bb387ad)

* Clim_CRU*: ClimCRU upraded by downscaling temperature data using a temperature lapse rate of -6.5K/1000m and a high-resolution DEM

* Clim_OSHD: highest level of detail, meteorological forcing generated according to methods developed by the Operational Snow Hydrological Service (OSHD), at 1km spatial and 1hour temporal resolution</li>

 Land-use surface data

This dataset further includes forcing land surface datasets used for the CLM5 simulations at 1km, 0.25° and 0.5° resolution (see folder *surface_landuse_datasets*). For the 1km resolution both the standard global (LU_Gl) and the high-resolution dataset (LU_HR), which includes a higher level of detail and is based on a more up-to-date land use datase, are provided. More details on these two datasets can be found in the above-mentioned publication.

evapotranspiration

display_name: evapotranspiration

forest-productivity

display_name: forest-productivity

land-cover

display_name: land-cover

land-use

display_name: land-use

oshd

display_name: oshd

snow

display_name: snow

snow-simulation

display_name: snow-simulation

en: Multi-resolution CLM5 simulations across Switzerland


en:
Attention: this data is not updated after 2022 anymore.
This dataset contains the statistics on the number of avalanche fatalities per **calendar year** in Switzerland. The data collection commences with the beginning of the year 1937. After the completion of a hydrological year, which is the standard way avalanche fatalities are summarized in Switzerland and ends on the 30th of September, the new data is appended to the existing dataset.
If you require annual statistics per hydrological year, please download the data from here: [https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936]
The following information is contained (by column and column title):
 - year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste, away from open and secured ski runs)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)
The definitions for these four categories, as described in the guidelines to the avalanche accident database are:
tour:
activities include back-country ski, snowboard or snow-shoe touring
offpiste:
access from ski area, generally from the top of a skilift with short hiking distances
transportation.corridors (Techel et al., 2016):
people travelling or recreating on open or temporarily closed transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)
buildings (Techel et al., 2016):
people inside or just outside buildings, and workers on high alpine building sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

en: Number of avalanche fatalities per calendar year in Switzerland since 1937


en: europe climate-indicators fire european-alps climate-change meteorological-data indicator-values forest-fire mountains climate

en: Data access

en: This dataset contains the Fire Weather Index for Hydrological Bavaria from 1980 - 2099 as stated in the paper "Climate change impacts on regional fire weather in heterogeneous landscapes of Central Europe" published in Natural Hazards and Earth System Sciens (NHESS) 2023. The dataset contains daily Fire Weather Index values for all 50 members (subfolders of the dataset) of the CRCM5-LE (11 km spatial resolution) from 1980 to 2099 over the domain of Hydrological Bavaria. Please cite this dataset as the publication: Miller, J., Böhnisch, A., Ludwig, R., & Brunner, M. I. (2023). Climate change impacts on regional fire weather in heterogeneous landscapes of Central Europe. Natural Hazards and Earth System Sciences Discussions, 1-25. doi: 10.5194/nhess-2023-51.

climate

display_name: climate

climate-change

display_name: climate-change

climate-indicators

display_name: climate-indicators

europe

display_name: europe

european-alps

display_name: european-alps

fire

display_name: fire

forest-fire

display_name: forest-fire

indicator-values

display_name: indicator-values

meteorological-data

display_name: meteorological-data

mountains

display_name: mountains

en: Fire Weather Index for Hydrological Bavaria from 1980-2099 derived from the 50 member CRCM5-LE


maintainer: Christian Rixen

en: tree-rings dwarf-shrubs stillberg nitrogen-isotope treeline fertilization

en: Metadata Nutrient Addition Stillberg Experimental Design

en: Nutrient addition map of the study area with the investigated plots. Each circle (study block) contains one control plot and two plots that received NPK fertilizer corresponding to 15 (NPK15) or 30 (NPK30) kg N ha-1 a-1. Contour lines specify the elevation (m a.s.l.) in steps of 10 m.

en: Project Description Nutrient Addition Stillberg

media_type: text/html

en: Link to Nutrient Addition project description on the WSL website (in German).

format: HTML

en: Data Nutrient Addition Stillberg

en: This link leads to the figshare repository, which contains all nutrient addition data.

en:
 Background information

The availability of nitrogen (N) and phosphorus (P) is considered to be a major factor limiting growth and productivity in terrestrial ecosystems globally. This project aimed to determine whether the growth stimulation documented in previous short‐term fertilisation trials persisted in a longer‐term study (12 years) in the treeline ecotone, and whether possible negative effects of nutrient addition offset the benefits of any growth stimulation.
Over the course of the 12 study years, NPK fertiliser corresponding to 15 or 30 kg N ha−1 a−1 was added annually to plots containing 30‐year‐old *Larix decidua* or 32‐year-old *Pinus uncinata* individuals with an understorey of mainly ericaceous dwarf shrubs. To quantify growth, annual shoot increments of trees and dwarf shrubs as well as radial growth increments of trees were measured. Nutrient concentrations in the soil were also measured and the foliar nutritional status of trees and dwarf shrubs was assessed.

 Experimental design

Over an elevation gradient of 140 m across the treeline afforestation site Stillberg, 22 locations were chosen that covered the whole range of microenvironmental conditions (*see* Nutrient addition experimental design.png). Half of the blocks included European larch (*L. decidua*) and the other half included mountain pine (*P. uncinata*). Within each block, three plantation quadrats were randomly selected as experimental plots and each plot was assigned to a control (no fertilisation) or to one of two fertiliser dose treatments (15 kg and 30 kg N ha−1 a−1). Treatments were assigned randomly but confined so that the location of fertilised plots within a block was not directly above control plots to avoid nutrient input from drainage. For details about the experiment, *see* Möhl et al (2019).

 Data description

The available datasets contain climate variables (2004-2016), nutrient isotope measurements (2010 & 2016), shrub growth measurements (2004-2016), soil parameter measurements and annual ring and shoot measurements (2004-2016). All data can be found here:
<https://figshare.com/articles/dataset/Twelve_years_of_low_nutrient_input_stimulates_growth_of_trees_and_dwarf_shrubs_in_the_treeline_ecotone/7025858>

dwarf-shrubs

display_name: dwarf-shrubs

fertilization

display_name: fertilization

nitrogen-isotope

display_name: nitrogen-isotope

stillberg

display_name: stillberg

tree-rings

display_name: tree-rings

treeline

display_name: treeline

en: Nutrient addition experiment at the Alpine treeline site Stillberg, Switzerland


en: snow-density microstructure antarctica snowmicropen snow-density-profile

en: Manual snow pits and other snow density measurements

en: List of SnowMicroPen measurements

en: List of all SnowMicroPen measurements, including date and location, and processing status. This list has been generated by the python code (see other resources in this dataset).

en: Jupyter notebook for processing the SnowMicroPen files.

en: SnowMicroPen pts files and processed txt files

en: Zip archive containing the acquired *.pts files (binary files recorded by the SnowMicroPen), and the converted *.txt files using the SMP.ipynb jupyter notebook (see the python code in the other resources in this dataset)

en: Documentation SnowMicroPen measurements

en: This *.zip archive contains all available documentation of the SnowMicroPen measurements, including the mapping of the SMP measurements in the terrestrial laser scan field at PEA (see documentation for 20161220) and at the Hammarryggen Ice Rise (see documentation for 20190104 and 20190111).

en: Python code exported from the Jupyter notebook for processing the SnowMicroPen files

en: SnowMicroPen (SMP) measurements and manual snowpits from Dronning Maud Land, East Antarctica. Measurements were taken in the vicinity of the Belgium Princess Elisabeth Station (PEA), in a transect towards the coast, and on the Lokeryggen and Hammarryggen Ice Rises near the coast. Measurements were taken during 3 individual campaigns in the 2016-2017, 2018-2019 and 2019-2020 field seasons.

antarctica

display_name: antarctica

microstructure

display_name: microstructure

snow-density

display_name: snow-density

snow-density-profile

display_name: snow-density-profile

snowmicropen

display_name: snowmicropen

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: SnowMicroPen measurements and manual snowpits from Dronning Maud Land, East Antarctica


en: geodata gridded-data time-series raster research-data-management video-encoding core sentinel-2

en: CORE Dataset (80 GB)

en:
Shell script to reproduce the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software for working with CORE will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en: View publication in the Digital Object Repository at WSL (DORA)

en:
Shell script to extract data from the CORE format. You can 1) download and unzip the file, 2) make the script executable and 3) run it.
Disclaimer: only provided for peer review. Proper software will become available in time on https://github.com/EnviDat/?q=core (both Web/JS for Frontend and Python for Backend).

en:
DISCLAIMER: CORE is still in development. Interested parties are warmly invited to join common development, to comment, discuss, find bugs, etc.

Acknowledgement: The CORE format was proudly inspired by the Cloud Optimized GeoTIFF ([COG](https://www.cogeo.org/)) format, by considering how to leverage the ability of clients issuing HTTP GET range requests for a time-series of remote sensing and aerial imagery (instead of just one image).

License: The Cloud Optimized Raster Encoding (CORE) specifications are released to the public domain under a Creative Commons 1.0 CC0 "No Rights Reserved" international license. You can reuse the information contained herein in any way you want, for any purposes and without restrictions.

-----------------------

Summary:
The Cloud Optimized Raster Encoding (CORE) format is being developed for the efficient storage and management of gridded data by applying video encoding algorithms. It is mainly designed for the exchange and preservation of large time series data in environmental data repositories, while in the same time enabling more efficient workflows on the cloud. It can be applied to any large number of similar (in pixel size and image dimensions) raster data layers. CORE is not designed to replace COG but to work together with COG for a collection of many layers (e.g. by offering a fast preview of layers when switching between layers of a time series).

WARNING: Currently only applicable to RGB/Byte imagery. The final CORE specifications may probably be very different from what is written herein or CORE may not ever become productive due to a myriad of reasons (see also 'Major issues to be solved').

With this early public sharing of the format we explicitly support the Open Science agenda, which implies "shifting from the standard practices of publishing research results in scientific publications towards sharing and using all available knowledge at an earlier stage in the research process" (quote from: European Commission, Directorate General for Research and Innovation, 2016. Open innovation, open science, open to the world).

CORE Specifications:

1) a MP4 or WebM video digital multimedia container format (or any future video container playable as HTML video in major browsers)

2) a free to use or open video compression codec such as H.264, VP9, or AV1 (or any future video codec that is open sourced or free to use for end users)

Note: H.264 is currently recommended because of the wide usage with support in all major browsers, fast encoding due to acceleration in hardware (which is currently not the case for AV1 or VP9) and the fact that MPEG LA has allowed the free use for streaming video that is free to the end users. However, please note that H.264 is restricted by patents and its use in proprietary or commercial software requires the payment of royalties to [MPEG LA](https://www.mpegla.com/programs/avc-h-264/). However, when AV1 matures and accelerated hardware encoding becomes available, AV1 is expected to offer 30% to 50% smaller file size in comparison with H.264, while retaining the [same quality](https://trac.ffmpeg.org/wiki/Encode/AV1).

3) the encoding frame rate should be of one frame per second (fps) with each layer segmented in internal tiles, similar to COG, ordered by the main use case when accessing the data: either layer contiguous or tile contiguous;

Note: The internal tile arrangement should support an easy navigation inside the CORE video format, depending on the use case.

4) a CORE file is optimised for streaming with the moov atom at the beginning of the file (e.g. with -movflags faststart) and optional additional optimisations depending on the codec used (e.g. -tune fastdecode -tune zerolatency for H.264)

5) metadata tags inside the moov atom for describing and using geographic image data (that are preferably compatible with the [OGC GeoTIFF standard](https://www.ogc.org/standards/geotiff) or any future standard accepted by the geospatial community) as well as list of original file names corresponding to each CORE layer

6) it needs to encode similar source rasters (such as time series of rasters with the same extent and resolution, or different tiles of the same product; each input raster should be having the same image and pixel size)

7) it provides a mechanism for addressing and requesting overviews (lower resolution data) for a fast display in web browser depending on the map scale (currently external overviews)

Major issues to be solved:

- Internal overviews (similar to COG), by chaining lower resolution videos in the same MP4 container for fast access to overviews first); Currently, overviews are kept as separate files, as external overviews.

- Metadata encoding (how to best encode spatial extent, layer names, and so on, for each of the layer inside the series, which may have a different geographical extent, etc...; Known issues: adding too many tags with FFmpeg which are not part of the standard MP4 moov atom; metadata tags have a limited string length.

- Applicability beyond RGB/Byte datasets; defining a standard way of converting cell values from Int16/UInt16/UInt32/Int32/Float32/Float64/ data types into multi-band Byte values (and reconstructing them back to the original data type within acceptable thresholds)

Example

Notice: The provided CORE (.mp4) examples contain modified Copernicus Sentinel data [2018-2021].

For generating the CORE examples provided, 50 original Sentinel 2 (S-2) TCI data images from an area located inside Switzerland were downloaded from www.copernicus.eu, and then transformed into CORE format using ffmpeg with H.264 encoding using the [x264 library](https://www.videolan.org/developers/x264.html).

For full reproducibility, we provide the original data set and results, as well scripts for data encoding and extraction (see resources).

core

display_name: core

geodata

display_name: geodata

gridded-data

display_name: gridded-data

raster

display_name: raster

research-data-management

display_name: research-data-management

time-series

display_name: time-series

video-encoding

display_name: video-encoding


en: dispersal biodiversity reef-fish ecology traits

en: Tropical reef fish trait data

en:
Species trait (i.e. adult body size, home range mobility behaviour, circadian activity and schooling) data gathered from the General Approach to Species Abundance Relationships (GASPAR) database (Kulbicki et al. 2013, Parravicini et al. 2013).

Kulbicki, M. et al. 2013. Global biogeography of reef shes: a hier- archical quantitative delineation of regions. – PLoS One 8: e81847.

Parravicini, V. et al. 2013. Global patterns and predictors of tropi- cal reef sh species richness. – Ecography 36: 1254–1262.

To complement the trait data with Pelagic Larval Duration information refer to the following publication:

Luiz, Osmar J., et al. "Adult and larval traits as determinants of geographic range size among tropical reef fishes." Proceedings of the National Academy of Sciences 110.41 (2013): 16498-16502.

In Donati et al. "A process-based model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography in August 2019, we used the PLD gathered from Luiz et al. 2013 as described in the methods - section "Species trait data".

en: Main text figures

en: R Script used for figures in main text in: Donati et al. 2019: "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019.

en: Global simulated distribution of species under a range of dispersal parameter values

en:
Global distribution of simulated species richness under a range of dispersal parameter values d
d ∈ [1.75°: 5.45°].

mimetype: text/plain

en: Supplementary material Appendix 1 Figures illustrated in Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages". accepted in Ecography, August 2019

en: Donati et al. main script

en:
Main script used in : Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages"
accepted in Ecography, August 2019

en: Dispersal parameter value d per simulation starting with a minimum dispersal value, where each species is able to colonise each adjacent cell, and ending with the value of d for which all the extant habitats, including the most remote Pacific islands, have been colonised (d ∈ [1.75°: 5.45°]).

en: Simulated rates of speciation and extinction under a range of dispersal parameters. Net diversification rates are calculated from the difference between speciation and extinction rates. This data allows the creation of Figure A4 in Supporting information, Appendix 1.

en: Input for the Global distribution maps for proportions of species richness for (a) simulated dispersal parameter value (b) observed dispersal-related traits

en: Geographic distribution data (species richness and proportions of high/low dispersal-related traits) on predominantly low dispersing and high dispersing species expected based on the simulations, and those where low- and high- dispersal related traits values are observed for the five investigated traits.

en: Input for spatial congruence test overlap between proportions of low and high dispersal and observed low- and high- dispersal-related traits in assemblages (30-50% threshold). see Table 2.

en: Global coast files from https://www.ngdc.noaa.gov/mgg/shorelines/gshhs.html used in the Figures

en: Functions used in R scripts in: Donati et al. 2019 "A process-based-model supports an association between  # dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019

en: Functions for Figures illustrated in Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019.

en: Global species distribution of tropical reef fish species

en: Each species corresponds to a "Gaspar_code" gathered from the General Approach to Species Abundance Relationships (GASPAR) database (Kulbicki et al. 2013, Parravicini et al. 2013) and is linked to a specific Fishned ID corresponding to a specific Latitude and Longitude.

en: Coral reef grid cells (shape, dbf, etc. files)

en:
Grid cells of 5 × 5°, corresponding to circa 555 × 555 km at the Equator (see Parravicini et al. 2013, Leprieur et al. 2016)

Parravicini, V. et al. 2013. Global patterns and predictors of tropi- cal reef sh species richness. – Ecography 36: 1254–1262.

Leprieur, F. et al. 2016. Plate tectonics drive tropical reef biodiver- sity dynamics. – Nat. Commun. 7: 11461.

en:
This dataset contains all data and R codes (R Development Core Team, https://www.R-project.org) used in the following publication: Donati GFA, Parravicini V, Leprieur F, Hagen O, Gaboriau T, Heine C, Kulbicki M, Rolland J, Salamin N, Albouy C, Pellissier L. "A process-based model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted by Ecography in August 2019. When using this data and R scripts the above publication should be cited.

The interaction of habitat dynamics with species dispersal abilities could generate gradients
in species diversity and prevalence of life-history and ecological traits, when the latter are associated with dispersal potential. In this dataset, we use a spatial mechanistic model of speciation, extinction and dispersal, constrained by a dispersal parameter. This model allows to simulate the interplay between reef habitat dynamics over the past 140 million years and dispersal, shaping lineage diversification history and global assemblage composition of over 6000 tropical reef fish species. Global trait distribution data of tropical reef fish are used to evaluate the congruence between simulations and observations.

biodiversity

display_name: biodiversity

dispersal

display_name: dispersal

ecology

display_name: ecology

reef-fish

display_name: reef-fish

traits

display_name: traits

en: Simulated and observed prevalence of dispersal-related traits in tropical reef fish assemblages worldwide