maintainer: EnviDat Support

en: smouldering lightning-location-system database holdover forest-fire zenodo

en: This database contains open, harmonized, and ready-to-use global data on holdover time. Holdover time is defined as the time between lightning-induced fire ignition and fire detection. The first version of the database is composed of three data files (censored data, non-censored data, ancillary data) and three metadata files (description of database variables, list of references, reproducible examples). These data were collected through a literature review of LIW studies and some datasets were assembled by authors of the original studies, covering more than 150,000 LIW from 13 countries in five continents and a time span of a century from 1921 to 2020. Censored data are the core of the database and consist of frequency data reporting the number or relative frequency of LIW per interval of holdover time. Ancillary data provide additional information on the methods and contexts in which the data were generated in the original studies. Potential contributors to the database are encouraged to contact the corresponding author in the readme file.

database

display_name: database

forest-fire

display_name: forest-fire

holdover

display_name: holdover

lightning-location-system

display_name: lightning-location-system

smouldering

display_name: smouldering

zenodo

display_name: zenodo

en: Database on holdover time of lightning-ignited wildfires


en: paleo-climate air-temperature last-glacial-maximum glaciers orography precipitation

state: active

type: dataset

en: Technical documentation

media_type: application/pdf

en: Technical documentation containing file metadata and variable descriptions.

format: PDF

mimetype: application/pdf

en: Data Access

en:
High resolution, downscaled climate model data are used in a wide variety of applications in environmental sciences. Here we present the CHELSA-TraCE21k downscaling algorithm to create global monthly climatologies for temperature and precipitation at 30 arcsec spatial resolution in 100 year time steps for the last 21,000 years. Paleo orography at high spatial resolution and at each timestep is created by combining high resolution information on glacial cover from current and Last Glacial Maximum (LGM) glacier databases with the interpolation of a dynamic ice sheet model (ICE6G) and a coupling to mean annual temperatures from CCSM3-TraCE21k. Based on the reconstructed paleo orography, mean annual temperature and precipitation was downscaled using the CHELSA V1.2 algorithm.

The data is published under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

format: GeoTIFF

air-temperature

display_name: air-temperature

glaciers

display_name: glaciers

last-glacial-maximum

display_name: last-glacial-maximum

orography

display_name: orography

paleo-climate

display_name: paleo-climate

precipitation

display_name: precipitation

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: CHELSA-TraCE21k: Downscaled transient temperature and precipitation data since the last glacial maximum


restoring-grassland-multifunctionality

title_for_slug: restoring-grassland-multifunctionality

en: mineralization restoration plants ecosystem-multifunctionality bacteria biodiversity soil-biodiversity nematodes grassland fungi

en: Functional diversity above_belowground fauna

format: XLS

en: Please note that C.sto and Corg have been corrected.

en: Please note that EMF, MF.below, MF.abio and Soil.hetero have been corrected.

en:
Please cite this paper together with the citation for the datafile.

Resch, M. C., Schütz, M., Buchmann, N., Frey, B., Graf, U., van der Putten, W. H., Zimmermann, S., Risch, A. C. 2021. Evaluating long-term success in grassland restoration – an ecosystem multifunctionality approach. Ecological Applications 31, e02271.

 Study area

The study was conducted in the Canton of Zurich, Switzerland, in and around two nature reserves Eigental and Altläufe der Glatt (47°27’ to 47°29’ N, 8°37’ to 8°32’ E, 417 to 572 m a.s.l.). All studied grasslands were located with a radius of approximately 4 km. Average monthly temperatures range from 0.7 ± 2.0 °C (January) to 19.0 ± 1.5 °C (July), and monthly precipitation range from 60 ± 42 mm (January) to 118 ± 46 mm (July [maxima]; 1989-2017; MeteoSchweiz 2018). In our study, we focused on semi-dry and semi-wet oligo- to mesotrophic grasslands characterized by high plant species richness and groundwater fluctuations throughout the year (Delarze et al. 2015, see also Resch et al. 2019).

 Experimental design and sampling

A large-scale restoration experiment to expand and reconnect isolated remnants of species-rich grasslands was initiated in the nature reserve Eigental in 1990. Twenty hectares of adjacent intensive grasslands were chosen for restoration. In 1995, three restoration methods of increasing intervention intensities were implemented. The goal of all three methods was to lower the availability of soil nutrients and hence, facilitate ecosystem development towards the targeted nutrient-poor grasslands. These methods were: Harvest only (hay harvest twice a year), Topsoil (removal of the nutrient-rich topsoil), and Topsoil+Propagules (topsoil removal combined with the application of hay from target vegetation). Plant biomass harvest (once a year in late summer/early autumn) commenced in Topsoil and Topsoil+Propagules five years after the soils were removed and is still ongoing today. We measured restoration success by comparing the three restoration methods with intensively managed (Initial) and semi-natural grasslands (Target) 22 years after restoration. Initial grassland sites share the same agricultural history as the restored sites: mowing and subsequent fertilizing (manure) up to five times a year, as well as different tillage regimes (Resch et al. 2019). Target sites were the sites from which hay for seeding the Topsoil+Propagules sites was collected. Soil conditions (i.e., soil types, soil texture) were comparable to those found in the restored grasslands (Resch et al. 2019). Additionally, Target sites were selected to represent a variety of semi-natural grasslands, including semi-dry to semi-wet conditions. In Target grasslands, biomass is harvested once a year in late summer or early autumn. Eleven 5 m x 5 m (25 m2) plots were randomly established in each of the five treatments (in total 55 plots; for a detailed map see Neff et al. 2020). An additional 2 m x 2 m (4 m2) subplot was randomly established at least 2 m away from each 25 m2 plot for destructive sampling. Data sampling took place between June and September 2017.

Vegetation properties

All plant species were identified within the 25 m2 plots (nomenclature: Lauber and Wagner 1996) in mid-June 2017 (in total 250 species). Vegetation structure and plant biomass were assessed diagonally on a transect of 2 m x 10 cm within the 25 m2 plot in early July 2017. We measured the maximum and mean height of the vegetation at the start, middle and end of the transect and calculated the standard deviation of these measures to describe vegetation structural heterogeneity (Schuldt et al. 2019). Thereafter, biomass was clipped on the entire transect to 1 cm height, sorted into five functional groups (graminoids, forbs, legumes, litter, and woody species), dried at 60 °C for 48 h, and weighed (Meyer et al. 2015).

 Aboveground arthropods

Aboveground arthropods were sampled at two locations in each 25 m2 plot in early July 2017 (see also Neff et al. 2020). Briefly, two cylindrical baskets (50 cm diameter, 67 cm height; woven fabric) were thrown simultaneously from outside the plot into two opposite corners. A closable mosquito mesh sleeve was mounted to the top of the baskets and an integrated metal ring at the bottom was fixed to the ground with metal stakes to assure that insects could not escape. A suction sampler (Vortis, Burkhard Manufacturing Co. Ltd., Hertfordshire, England) was then inserted into one of the baskets through the opening of the sleeve and the plot was “vacuumed" twice for 105 seconds with a 30 seconds break. The collected animals were immediately transferred into 70% ethanol. Arthropods were sorted and assigned to 23 taxonomic groups. Holometabolic larvae were lumped into one category while hemimetabolic larvae were grouped separately from adults in the respective taxonomic rank. We used mean values of individuals per plot for total abundance. Aboveground arthropod richness was defined by the number of different taxa to lowest taxonomic level (in total 23 taxa). All taxa were assigned to one of five trophic levels: 1) primary producers, 2) primary consumers, 3) secondary consumers, 4) tertiary consumers, and 5) quaternary consumers.

 Belowground fauna

Sampling of all belowground fauna took place in mid-July 2017. Earthworms were sampled in two 30 cm x 30 cm x 20 cm soil monoliths at two opposite corners of the 25 m2 plot (opposite to aboveground arthropod sampling). The excavated soil monolith was broken by hand, all earthworms collected and immediately transferred in a 4% formaldehyde solution. Thereafter, earthworm individuals were identified to species level (in total 10 taxa; Christian and Zicsi 1999) and species assigned to three functional groups (Bouché 1977).
To assess soil arthropod communities, we randomly collected one undisturbed soil core (5 cm diameter, 12 cm depth) in each 4 m2 subplot with a slide hammer corer lined with a plastic sleeve (AMS Samplers, American Falls, Idaho, USA). Soil arthropods were extracted using Berlese-Tullgren funnels (3 mm mesh), starting the day of sampling and lasting 14 days. Individuals were stored in 70% ethanol. Soil arthropods were assigned to 41 taxonomic groups and 4 feeding types. Holometabolic and hemimetabolic larvae were treated as previously described for aboveground arthropods. Belowground arthropod richness refers to the 41 taxonomic groups.

For soil nematode sampling, we randomly collected eight soil cores of 2.2 cm diameter (Giddings Machine Company, Windsor, CO, USA) within each 4 m2 subplot to a depth of 12 cm. The eight cores were combined, gently homogenized, placed in coolers, kept at 4 °C and transported to the laboratory at NIOO in Wageningen (NL) within one week after collection. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriator (Oostenbrink 1960) and prepared for morphological identification and quantification as described by Resch et al. (2019). Nematodes were identified to family level (39 taxa) according to Bongers (1988), assigned to 17 functional groups, 5 feeding types and 5 colonizer-persister (C-P) classes (Yeates et al. 1993, Bongers 1990, Resch et al. 2019).

We randomly collected two more soil cores (2.2 cm diameter x 12 cm depth) within each 4 m2 subplot to determine soil microbial communities. Again, the soil cores were combined, homogenized, placed in coolers and transported to the laboratory at WSL in Birmensdorf (Switzerland) where the metagenomic DNA was extracted from 8 g sieved soil (2 mm) using the DNeasy PowerMax Soil Kit (Quiagen, Hilden, NRW, GER) according to the manufacturer`s instructions. PCR amplification of the V3-V4 region of the prokaryotic small-subunit (16S) and the ribosomal internal transcribed spacer region (ITS2) of eukaryotes was performed with 1 ng of template DNA utilizing PCR primers and conditions as previously described (Frey et al., 2016). PCRs were run in triplicates and pooled. The pooled amplicons were sent to the Genome Quebec Innovation Centre (Montreal, QC, Canada) for barcoding using the Fluidigm Access Array technology (Fluidigm) and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, CA, USA). Quality filtering, clustering into operational taxonomic units (OTUs) and taxonomic assignment were performed as described by Frey et al. (2016) and Adamczyk et al. (2019). We used a customised pipeline largely based on UPARSE (Edgar 2013) implemented in USEARCH v. 9.2 (Edgar 2010). After discarding singletons of dereplicated sequences, clustering into OTUs with 97% sequence similarity was performed (Edgar 2013). Quality-filtered reads were mapped on the filtered set of centroid sequences. Taxonomic classification of prokaryotic and fungal sequences was conducted querying against most recent versions of SILVA (v.132, Quast et al. 2013) and UNITE (v.8, Nilsson et al. 2018). Only taxonomic assignments with confidence rankings equal or higher than 0.8 were accepted (assignments below 0.8 set to unclassified). Prokaryotic OTUs assigned to mitochondria or chloroplasts as well as eukaryotic OTUs assigned other than fungi were removed prior to data analysis. In addition, prokaryotic and fungal datasets were filtered to discard singletons and doubletons. Thereafter, OTU abundance matrices were rarefied to the lowest number of sequences per community, to normalize the total number of reads and achieve parity between samples (Prokaryota: 29,843 reads; Fungi: 26,690 reads). Finally, prokaryotic and fungal observed richness (number of OTUs) were estimated (Prokaryota: 14,010 OTUs; Fungi: 5,813 OTUs). For prokaryotes, we distinguished five and for fungi six functional types based on lowest taxonomic resolution (Nguyen et al. 2016, Tedersoo et al. 2014). Belowground taxon richness was defined by the total number of earthworm, arthropod, nematode, fungi, and prokaryote taxa assigned to lowest taxonomic level. Finally, all belowground taxa were assigned to the same five trophic levels as the aboveground arthropods.

 Soil chemical and physical properties, soil nitrogen mineralization

We randomly collected three 5 cm diameter x 12 cm depth soil samples in each 4 m2 subplot with a slide hammer corer (AMS Samplers, American Falls, Idaho, USA), pooled them and then made two subsamples. One was field-fresh and stored at 3 °C until analysis, the other was dried for 48 h at 60 °C and passed through a 4 mm mesh. From the dried sample, we measured soil pH potentiometrically in 0.01 M CaCl2 (soil:solution ratio=1:2; 30 minutes equilibration time). Total and organic carbon content were measured on fine-ground samples (≤ 0.5 mm) by dry combustion using a CN analyzer NC 2500 (CE Instruments, Wigan, United Kingdom). Inorganic carbon of samples with a pH > 6.5 was removed with acid vapor prior to analysis of organic carbon (Walthert et al. 2010). We calculated total soil carbon (C) storage after correcting its content for soil depth, stone content and density of fine earth (see below). Exchangeable cations were determined on another 5 g dry soil sample with 50 mL unbuffered 1 M NH4Cl solution (soil:solution ratio=1:10, end-over-end shaker for 1.5 hours) and measured by an ICP-OES (Optima 7300 DV, Perkin-Elmer, Waltham, Massachusetts, USA). Thereafter, cation exchange capacity (CEC) was calculated as the sum of exchangeable cations and protons (and expressed as mmolc per 1 kg soil) and used to describe nutrient retention capacity in our plots. Concentrations of exchangeable protons were calculated as the difference between total and Al-induced exchangeable acidity as determined by the KCl-method (Thomas 1982).

Ammonium (NH4+) and nitrate (NO3−) were extracted from a 20 g fresh subsample with 80 mL 1M KCl for 1.5 hours on an end-over-end shaker and filtered through ashless folded filter paper (DF 5895 150, ALBET LabScience, Hahnemühle FineArt GmbH, Dassel, Germany). NH4+ concentrations were determined colorimetrically by automated flow injection analysis (FIAS 300, Perkin-Elmer, Waltham, Massachusetts, USA). NO3− concentrations were measured colorimetrically according to Norman and Stucki (1981). Potential soil net nitrogen (N) mineralization was assessed during an 8-week incubation period under controlled moisture (60% of field capacity), temperature (20 °C) and light conditions (dark) in the laboratory. We weighed duplicate samples of fresh soil equivalent to 8 g dry soil (24 h at 104 °C) into 50 mL Falcon tubes. Soil samples were extracted for NH4+ and NO3− at the beginning and after eight weeks as described above. Soil net N mineralization was calculated as the difference between the inorganic nitrogen (NH4+ and NO3−) before and after the incubation (Hart et al. 1994), corrected for the total incubation time and represented per day values expressed as mg N kg-1 soil d-1.

To assess soil physical properties, we randomly collected one undisturbed soil core per 4 m2 subplot (5 cm diameter, 12 cm depth) in a steel cylinder that fit into the slide hammer (AMS Samplers, American Falls, Idaho, USA). The cylinder was capped in the field to avoid disturbance. We then measured field capacity in the laboratory. For this purpose, the cylinder and soil therein were saturated in a water bath and drained on a sand/silt-bed with a suction corresponding to 60 cm hydrostatic head. The moist soil was dried at 105 °C to constant weight. Field capacity was calculated by dividing the mass of water by the total mass of wet soil contained at 60 cm hydrostatic head and used to describe water holding capacity. Thereafter, samples were passed through a 4 mm mesh. Fine-earth and skeleton fractions were weighed separately to assess bulk soil density (fine-earth plus skeleton), density of fine earth, and proportion of skeleton. Particle density was determined with the pycnometer method (Blake and Hartge 1986), and total porosity and proportion of fine pores were calculated (Danielson and Sutherland 1986). Clay, silt, and sand contents were quantified with the sediment method (Gee and Bauder 1986).

Surface and soil temperature (12 cm depth, water-resistant digital pocket thermometer; IP65, H-B Instrument, Trappe, Pennsylvania, USA) as well as volumetric soil moisture content (12 cm depth, time domain reflectometry; Field-Scout TDR 300, Spectrum Technologies, Aurora, Illinois, USA) were measured at five random locations within the 4 m2 subplots every month from June to September. We calculated the standard deviation of each temperature and moisture measure over four months to describe seasonal variations. Slope inclination was determined at plot-level via GPS measurements (GPS 1200, Leica Geosystem, Heerbrugg, Switzerland) and categorized into slope gradient classes according to FAO standards (1990). Thickness of the topsoil horizon (equivalent to Ah or Aa horizon) was determined at one soil monolith (30 x 30 x 30 cm3) per 4 m2 subplot in cm and rounded to next integer.

 References

Adamczyk, M., F. Hagedorn, S. Wipf, J. Donhauser, P. Vittoz, C. Rixen, A. Frossard, J. Theurillat, and B. Frey. 2019. The soil microbiome of GLORIA mountain summits in the Swiss Alps. Frontiers in Microbiology 10:1080-1101.

Blake, G.R., and K. H. Hartge. 1986. Particle Density. Pages 377-382 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Bongers, T. 1988. De nematoden van Nederland. Stichting Uitgeverij van de Koniklijke Nederlandse Natuurhistorische Verenigung (KNNV), Utrecht.

Bongers, T. 1990. The maturity index: an ecological measure of environmental disturbance based on nematode species composition. Oecologia 83:14-19.

Bouché, M. B. 1977. Strategies lombriciennes. Ecological Bulletins 25:122-132.

Christian, E., and A. Zicsi. 1999. Ein synoptischer Bestimmungsschlüssel der Regenwürmer Österreichs (Oligochaeta: Lumbricidae). Die Bodenkultur 50:121-131.

Danielson, R. E., and P. L. Sutherland. 1986. Porosity. Pages 443-461 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Delarze, R., Y. Gonseth, S. Eggenberg, and M. Vust. 2015. Lebensräume der Schweiz: Ökologie ‐ Gefährdung ‐ Kennarten, Ott Verlag, Bern.

Edgar, R. C. 2010. Search and clustering orders of magnitude faster than BLAST. Bioinformatics 26:2460–2461.

Edgar, R. C. 2013. UPARSE: highly accurate OTU sequences from microbial amplicon reads. Nature Methods 10:996–998.

FAO. 1990. Guidelines for soil description, third ed. Land and Water Development Division at the Food and Agriculture Organization of the United Nations (FAO), Rome.

Frey, B., T. Rime, M. Phillips, B. Stierli, I. Hajdas, F. Widmer, and M. Hartmann. 2016. Microbial diversity in European alpine permafrost and active layers. FEMS Microbiology Ecology 92:fiw018.

Gee, G.W., and J. W. Bauder. 1986. Particle-size analysis. Pages 383-411 in A. Klute, editor. Methods of soil analysis: Part 1—Physical and mineralogical methods. Soil Science Society of America (SSSA) Inc., Madison.

Hart, S. C, J. M. Stark, E. A. Davidson, and M. K. Firestone. 1994. Nitrogen mineralization, immobilization, and nitrification. Pages 985-1016 in R. W. Weaver, S. Angle, P. Bottomley, D. Bezdicek, S. Smith, A. Tabatabai, and A. Wollum, editors. Methods of soil analysis: Part 2—Microbiological and biochemical properties. Soil Science Society of America (SSSA) Inc., Madison.

Lauber, K., Wagner, G., 1996. Flora Helvetica. Flora der Schweiz. Haupt Verlag, Bern.

MeteoSchweiz, 2018. Klimabulletin Jahr 2017. MeteoSchweiz, Zürich.

Meyer, S. T., C. Koch, and W. W. Weisser. 2015. Towards a standardized rapid ecosystem function assessment (REFA). Trends in Ecology and Evolution 30:390-397.

Neff, F., M. C. Resch, A. Marty, J. Rolley, M. Schütz, A. C. Risch, and M. M. Gossner. 2020. Long-term restoration success of insect herbivore communities in semi-natural grasslands – a functional approach. Ecological Applications 0:e02133

Nguyen, N.H., Z. W. Song, S. T. Bates, S. Branco, L. Tedersoo, J. Menke, J. S. Schilling, and P. G. Kennedy. 2016. FUNGuild: an open annotation tool for parsing fungal community datasets by ecological guild. Fungal Ecology 20:241–248.

Nilsson, R. H., K.-H. Larsson, A. F. S. Taylor, J. Bengtsson-Palme, T. S. Jeppesen, D. Schigel, P. G. Kennedy, K. Picard, F. O. Glöckner, L. Tedersoo, I. Saar, U. Kõljalg, and K. Abarenkov. 2018. The UNITE database for molecular identification of fungi: handling dark taxa and parallel taxonomic classifications. Nucleic Acids Research 47:259–264.

Norman, R. J., and J. W. Stucki. 1981. The Determination of Nitrate and Nitrite in Soil Extracts by Ultraviolet Spectrophotometry. Soil Science Society of America Journal 45:347-353.

Oostenbrink, M. 1960. Estimating nematode populations by some selected methods. Pages 81-101 in J. J. Sasser, and W. R. Jenkins, editors. Nematology. Univ. of North Carolina Press, Chapel Hill.

Quast, C., E. Pruesse, P. Yilmaz, J. Gerken, T. Schweer, P. Yarza, J. Peplies, and F. O. Glöckner. 2013. The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucleic Acids Research 41:590-596.

Resch, M. C., M. Schütz, U. Graf, R. Wagenaar, W.H. van der Putten, and A. C. Risch. 2019. Does topsoil removal in grassland restoration benefit both soil nematode and plant communities? Journal of Applied Ecology 56:1782-1793.

Schuldt, A., A. Ebeling, M. Kunz, M. Staab, C. Guimarães-Steinicke, D. Bachmann, N. Buchmann, W. Durka, A. Fichtner, F. Fornoff, W. Härdtle, L. R. Hertzog, A-N. Klein, C. Roscher, J. Schaller, von G. Oheimb, A. Weigelt, W. Weisser, C.Wirth, J. Zhang, H. Bruelheide, and N. Eisenhauer. 2019. Multiple plant diversity components drive consumer communities across ecosystems. Nature Communications 10:1460.

Tedersoo, L., M. Bahram, S. Põlme, U. Kõljalg, N. S. Yorou, R. Wijesundera, L. Villarreal Ruiz, A. M. Vasco-Palacios, P. Q. Thu, A. Suija, M. E. Smith, C. Sharp, E. Saluveer, A. Saitta, M. Rosas, T. Riit, D. Ratkowsky, K. Pritsch, K. Põldmaa, M. Piepenbring, C. Phosri, M. Peterson, K. Parts, K. Pärtel, E. Otsing, E. Nouhra, A. L. Njouonkou, R. H. Nilsson, L. N. Morgado, J. Mayor, T. W. May, L. Majuakim, D. J. Lodge, S. See Lee, K.-H. Larsson, P. Kohout, K. Hosaka, I. Hiiesalu, T. W. Henkel, H. Harend, L.-D. Guo, A. Greslebin, G. Grelet, J. Geml, G. Gates, W. Dunstan, C. Dunk, R. Frenkhan, L. Dearnaley, A. De Kesel, T. Dang, X. Chen, F. Buegger, F. Q. Brearley, G. Bonito, S. Anslan, S. Abell, and K. Abarenkov. 2014. Global diversity and geography of soil fungi. Science 346:1256688.

Thomas, G.W. 1982. Exchangeable cations. Pages 159-165 in A. L. Page, R. H. Miller, and D. R. Keeney, editors. Methods of Soil Analysis: Part 2—Chemical and microbiological properties. Soil Science Society of America (SSSA) Inc., Madison.

Walthert, L., U. Graf, A. Kammer, J. Luster, D. Pezzotta, S. Zimmermann, and F. Hagedorn. 2010. Determination of organic and inorganic carbon, δ13C, and nitrogen in soils containing carbonates after acid fumigation with HCl. Journal of Plant Nutrition and Soil Sciences 173:207-216.

Yeates, G. W., T. Bongers, R. G. M. de Goede, D. W. Freckman, and S. S. Georgieva. 1993. Feeding habits in soil nematode families and genera – an outline for soil ecologists. Journal of Nematology 25:315-331.

bacteria

display_name: bacteria

biodiversity

display_name: biodiversity

ecosystem-multifunctionality

display_name: ecosystem-multifunctionality

fungi

display_name: fungi

grassland

display_name: grassland

mineralization

display_name: mineralization

nematodes

display_name: nematodes

plants

display_name: plants

restoration

display_name: restoration

soil-biodiversity

display_name: soil-biodiversity

en: Restoring grassland multifunctionality


maintainer: Esther R. Frei

en: g-tree picea-abies treeline swiss-alps seedling-recruitment forest climate-change stillberg larix-decidua

media_type: text/plain

en: climate data G-TREE experiment, Davos, Switzerland

format: TXT

mimetype: text/plain

en:
 Background information
Climate change-induced range expansion of treeline populations depends on their successful recruitment, which requires dispersal of viable seeds followed by successful establishment of individual propagules. The Global Treeline Range Expansion Experiment (G-TREE) is a global initiative involving researchers from Europe, North America, Australia and New Zealand (Brown et al., 2013). At 15 alpine and Arctic treeline sites worldwide the mechanisms determining the elevational and latitudinal distribution of tree populations are studied using a standardized experimental approach. In summer 2013, a multifactorial seedling recruitment experiment has been established at the Stillberg ecological treeline research site. The aim of this experiment, is to quantify the effect of multiple abiotic and biotic drivers on emergence, survival, and growth of *Larix decidua* and *Picea abies* seedlings in replicated plots along an elevation gradient with three sites below (1930 m a.s.l.), at (2090 m a.s.l.), and above treeline (2410 m a.s.l.; Frei et al., 2018). All plots have been surveyed annually to count seedlings and to measure their total height. Additional environmental factors, such as soil temperature, have been recorded.

 Experimental design
The Stillberg research area is located in the Eastern Swiss Alps near Davos, Switzerland. The site has been used for several long-term monitoring as well as experimental studies for the last four decades. Our G-TREE experiment consists of a lowest site located in a subalpine Larch-Spruce forest (*Larici-Picetum*) dominated by *Larix decidua* and *Picea abies* (1930 m a.s.l.), a transition zone site dominated by alpine shrubs (2100 m a.s.l.), and an uppermost site in an alpine meadow with some dwarf shrubs (2390 m a.s.l.). The three experimental sites were set up following the standard protocol of the global G-TREE initiative (Brown et al., 2013). In a split-plot design, 20 plots (224 cm × 45 cm) were established at each site, which were randomly assigned to the 2 × 2 treatment combinations of the main factors seeding and scarification (i.e. seeding and scarification, seeding only, scarification only, and full control), resulting in five replications per main treatment combination. Each plot was divided into 16 split-plots (22.5 cm × 28 cm), to which treatment combinations of four additional two-level factors species (larch and spruce), provenance (low- and high-elevation), herbivore exclosure (with and without exclosure), and seeding year (2013, 2014) were randomly assigned, which resulted in a total of 960 split-plots (Details see Frei et al. 2018).

 Data description
All plots have been surveyed annually to count seedlings and to measure their total height. Seedling height was assessed with a hand ruler as the total length from the original emerging point to the apical meristem (Details see Frei et al. 2018). Additionally, soil temperature at each site, has been continuously recorded since 2013. Here, we present data from eight years (2013–2021).

climate-change

display_name: climate-change

forest

display_name: forest

g-tree

display_name: g-tree

larix-decidua

display_name: larix-decidua

picea-abies

display_name: picea-abies

seedling-recruitment

display_name: seedling-recruitment

stillberg

display_name: stillberg

swiss-alps

display_name: swiss-alps

treeline

display_name: treeline

en: G-TREE: Global Treeline Range Expansion Experiment Davos, Switzerland


latent-heat-flux-over-snow

maintainer: Sergi González-Herrero

title_for_slug: latent-heat-flux-over-snow

en: snow swiss-alps meteo-station meteo central-asia meta

media_type: application/zip

en:
This file includes the datasets used to compare the methods. It includes:
- EC Postprocessed heat flux data from sonic anemometer and gas analyzer. Files named: [SITE]_(NO)WatVap_eddypro_OUT_[type].csv
- MOST Postprocessed data from SNOWPACK model. Files named [SITE]_[year]_[METHOD].smet
- Configuration files for SNOWPACK (.ini files) and Eddypro (.eddypro files)

[SITE] correspond to DISHMA/DISH or Alpine Valley, PLATEAU/PLAT for Antarctic Plateau, TAJ for Pamir mountains (no EC)
[type] correspond to fluxnet, full_output or qc_details
[METHOD] indicates the stability model used and/or the roughness length

format: ZIP

en:
This file includes the Jupyter notebooks to reproduce the method and the figures of the paper. This consists in:
- 3 files for Alpine Valley
- 3 files for Antarctic Plateau
- 1 file for application at Pamir mountains

format: SERVICE

en:
This dataset contains three case studies where are compared the latent heat flux calculated using the Eddy Covariance (EC) method, the Monin-Obukhov Similarity Theory (MOST) and the modified Bowen-ratio method presented in the research paper "Using the sensible heat flux eddy covariance based exchange coefficient to calculate latent heat from moisture mean gradients overn snow". We include the datasets, the code and the ini files for reproduce the research.
The dataset contain two files in zip format:
 1. Sowftware-Heat_fluxes_on_snow: Jupyter notebooks to reproduce the method and the figures of the paper.
 2. data.zip: Datasets used to compare the methods

central-asia

display_name: central-asia

meta

display_name: meta

meteo

display_name: meteo

meteo-station

display_name: meteo-station

snow

display_name: snow

en: Latent Heat Flux over Snow


en: sense-of-place urban-ecology electrodermal-activity landscape place-attachment

en: 02. Questionnaire Data

en: 03. Publication Ready Data

en: 05. Visuals

en: 04. Scripts

en: 01. EDA Processed Data

en: 00. EDA Raw Data

en: This repository contains data on EDA measurements of visitors with different cultural backgrounds in virtual urban park settings. The parks are a Persian garden (Shiraz, Iran) and a historical park in Zurich, Switzerland. The cultural background of the visitors is Persian and Central European. The repository contains raw data from EDA, processed time series and statistical procedures.

electrodermal-activity

display_name: electrodermal-activity

landscape

display_name: landscape

place-attachment

display_name: place-attachment

sense-of-place

display_name: sense-of-place

urban-ecology

display_name: urban-ecology

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Electrodermal Activity (EDA) of Bi-cultural Visitors In Virtual Park Settings


en: climate-change biodiversity statistical-interpolation ecology radiation-transfer microclimate forest

en: Predicted microclimate topsoil temperatures at 5 cm below ground. 10 m spatial resolution raster files are provided for mean daily minimum (tmin), mean (tmean) and maximum (tmax) temperatures during each month from April (04) to October (10) over the period between 2012 to 2021.

en: Predicted microclimate air temperatures at 5 cm above ground. 10 m spatial resolution raster files are provided for mean daily minimum (tmin), mean (tmean) and maximum (tmax) temperatures during each month from April (04) to October (10) over the period between 2012 to 2021.

en: Predicted microclimate air temperatures at 100 cm above ground. 10 m spatial resolution raster files are provided for mean daily minimum (tmin), mean (tmean) and maximum (tmax) temperatures during each month from April (04) to October (10) over the period between 2012 to 2021.

en: Climate data matching the scales at which organisms experience climatic conditions are often missing. Yet, such data on microclimatic conditions are required to better understand climate-change impacts on biodiversity and ecosystem functioning. Here we combine a national network of microclimate temperature measurements with a novel radiative transfer model to map monthly minimum, mean and maximum temperatures during the vegetation period at a 10 meter spatial resolution across Switzerland. The temperature measurements took place in 107 sampling plots distributed across different habitat types, with 62 plots in forests, 22 below trees outside forests, and 23 in open grasslands. In each plot we measured temperature in the topsoil (-5cm), as well as in the air at 5cm and 100cm height above ground. Spatial interpolation was achieved by using a hybrid approach based on linear mixed effects models with input from detailed radiation estimates that account for topographic and vegetation shading, as well as other predictor variables related to the macroclimate, topography and vegetation height. Our data reveals strong horizontal and vertical variability in microclimate temperature, particularly for maximum temperatures at 5 cm above the ground and within the topsoil. Compared to macroclimate conditions as measured by weather stations outside forests, diurnal air and topsoil temperature ranges inside forests were reduced by up to 3.0 and 7.8 °C, respectively, while below trees outside forests, e.g. in hedges and below solitary trees, this buffering effect was 1.8 and 7.2 °C. We also found that in open grasslands, maximum temperatures at 5 cm above ground are on average 3.4 °C warmer than that of macroclimate, suggesting that in such habitats heat exposure close to the ground is often underestimated when using macroclimatic data. After accounting for macroclimate effects, microclimate patterns were primarily driven by radiation, with particularly strong effects on maximum temperatures. Results from spatial block cross-validation revealed predictive accuracies as measured by RSME’s ranging from 1.18 to 3.43 °C, with minimum temperatures generally being predicted more accurately than maximum temperatures. The microclimate maps presented here enable a more biologically relevant perspective when analysing climate-species interactions, which is expected to lead to a better understanding of biotic and ecosystem responses to climate and land use change.

biodiversity

display_name: biodiversity

climate-change

display_name: climate-change

ecology

display_name: ecology

forest

display_name: forest

microclimate

display_name: microclimate

radiation-transfer

display_name: radiation-transfer

statistical-interpolation

display_name: statistical-interpolation

en: Monthly topsoil and near surface microclimate temperature data for Switzerland


en: traffic-noise outdoor-restoration landscape-perception ppgis survey

media_type: text/csv

en: Processed data for article in Urban Forestry and Urban Greening [https://doi.org/10.1016/j.ufug.2025.128746](https://doi.org/10.1016/j.ufug.2025.128746)

format: CSV

en: Processed data for coding analysis for article in Urban Forestry and Urban Greening [https://doi.org/10.1016/j.ufug.2025.128746](https://doi.org/10.1016/j.ufug.2025.128746)

en: Processed survey data for window view for article in Landscape and Urban Planning [https://doi.org/10.1016/j.landurbplan.2025.105339](https://doi.org/10.1016/j.landurbplan.2025.105339)

en: Processed survey data of restorative locations for article in Landscape and Urban Planning [https://doi.org/10.1016/j.landurbplan.2025.105339](https://doi.org/10.1016/j.landurbplan.2025.105339)

en: RESTORE WP4_Questionnaire_German.pdf

en: Questionnaire in German

en: RESTORE WP4_Questionnaire_Italian.pdf

en: Questionnaire in Italian

en: Coding analysis first round for article in Urban Forestry and Urban Greening [https://doi.org/10.1016/j.ufug.2025.128746](https://doi.org/10.1016/j.ufug.2025.128746)

en: RESTORE WP4_Questionnaire_French.pdf

en: Questionnaire in French

en: Coding analysis third round for article in Urban Forestry and Urban Greening [https://doi.org/10.1016/j.ufug.2025.128746](https://doi.org/10.1016/j.ufug.2025.128746)

en: Raw data for article in Urban Forestry and Urban Greening [https://doi.org/10.1016/j.ufug.2025.128746](https://doi.org/10.1016/j.ufug.2025.128746)

en: Variable list for article in Urban Forestry and Urban Greening [https://doi.org/10.1016/j.ufug.2025.128746](https://doi.org/10.1016/j.ufug.2025.128746)

en: Variable list for statistical analyses for article in Landscape and Urban Planning [https://doi.org/10.1016/j.landurbplan.2025.105339](https://doi.org/10.1016/j.landurbplan.2025.105339)

en: Description of the sample stratification process for the invitation to participate in the survey

en: Coding analysis second round for article in Urban Forestry and Urban Greening [https://doi.org/10.1016/j.ufug.2025.128746](https://doi.org/10.1016/j.ufug.2025.128746)

en: Cleaned raw data from survey for article in Landscape and Urban Planning [https://doi.org/10.1016/j.landurbplan.2025.105339](https://doi.org/10.1016/j.landurbplan.2025.105339)

en: Study protocol of the survey

en:
This repository contains data related to the Swiss-wide survey of the RESTORE project. This project is a collaboration between the Swiss Federal Institute for Forest, Snow and Landscape Research (WSL) and the Swiss Federal Laboratories for Materials Science & Technology (EMPA). It has received funding from the Swiss National Science Foundation. The objective of the RESTORE project was to assess the effects of green spaces as facilitators and noise as impediment to recover from stress in people's daily environments across Switzerland.
We conducted a nation-wide participatory mapping survey among Swiss residents to explore:
1.	The effects of greenness and noise exposure on psychological restoration when looking out of the window at home or when visiting nearby green spaces. It adopted a landscape approach to examine the interplay between environmental factors, individual perceptions, and personal traits – Scientific article 1
2.	The multiple aspects that constraint restoration when visiting nearby green spaces – Scientific article 2
Accordingly, this repository includes data and documentation for the following 2 scientific articles:
1.	Scientific article 1. “The role of greenness and road traffic noise for psychological restoration in everyday environments. A participatory mapping approach”. Landscape and Urban Planning, 2025
2.	Scientific article 2. “Perceived constraints for psychological restoration in nearby greenspaces. An exploratory and multi-dimensional approach”. Urban Forestry and Urban Greening, 2025

landscape-perception

display_name: landscape-perception

outdoor-restoration

display_name: outdoor-restoration

ppgis

display_name: ppgis

survey

display_name: survey

traffic-noise

display_name: traffic-noise

en: Swiss-wide survey on restorative places and road traffic noise


rorcc

maintainer: Tobias Wechsler

title_for_slug: rorcc

en: environmental-flow run-of-river-power-plants climate-change design-discharge hydropower

en: RoRCC

en:
The dataset “RoRCC” consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
-	metadata on the RoR power plants under consideration
-	annual and seasonal production scenarios differentiated into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)
-	annual and seasonal production loss due to environmental flow requirements
-	annual and seasonal the technical increase potential (via design discharge optimisation)
-	annual and seasonal changes in the hydrological cycle for the three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099)

en:
The dataset "RoRCC" consists of simulation-based results on climate change impacts on Alpine RoR power production; it is based on 21 Swiss RoR power plants, with a total production of 5.9 TWh a-1. The dataset contains the following information:
1) metadata on the RoR power plants under consideration, 2) annual and seasonal production potential scenarios under into three emission scenarios (RCP2.6, RCP4.5, RCP8.5) and three future periods (T1: 2020–2049, T2: 2045–2074, T3: 2070–2099), 3) annual and seasonal streamflow scenarios, 4) annual and seasonal production loss due to environmental flow requirements, 5) annual and seasonal the technical increase potential (via design discharge optimisation) and 6) annual and seasonal changes in the hydrological cycle.

design-discharge

display_name: design-discharge

environmental-flow

display_name: environmental-flow

hydropower

display_name: hydropower

run-of-river-power-plants

display_name: run-of-river-power-plants

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


en: water-demand water-scarcity reservoirs water-supply climate-change

en: Water demand version 2 (corrected version)

mimetype: application/zip

en: Water supply

en: Simulated discharge series for a reference period 1981-2010 and till the end of the century. Data are provided for 39 climate model chains and a control run based on the observed meteorology. Data are provided at daily resolution (mm/d).

en: Reservoir volumes

en: Reservoir volume for the 307 medium-sized catchments for different storage categories: natural lakes, artificial reservoirs, reservoirs for artificial snow production, drinking water reservoirs, and usable volumes of natural lakes. Unit: Mio m³. One column per catchment (see shapefile).

en: Shapefile of 307 catchments in Switzerland

en: Shapefile of 307 catchments for which estimates of water supply, demand, and reservoir volumes are provided. The OBJECTID entry corresponds to the catchment ID which is used as a reference in the other datasets provided.

en: Water demand (deprecated)

en:
Warning: please use the corrected version 2, since this file contains errors for certain categories such as Livestock, Industry or Houshold.

Water demand estimates for the 307 medium-sized catchments for different categories for current and future conditions. One text file is provided per demand category. One column corresponds to one catchment (IDs compare to shapefile), The data are provided at monthly resolution in mm/d and can be converted to volumes by using the catchment area. E.g.
Q[mm/d] * catchment area [m²] /1000 = Q[m³/d]
or to obtain discharge in m³/s
Q[mm/d] * catchment area [m²]/1000/24/3600 = Q [m³/s].
Future irrigation and hydropower water demand are provided per climate model chain.

en:
The dataset Hydro-CH2018 reservoirs provides estimates of current and future water supply, water demand, and storage volumes for 307 medium-sized catchments in Switzerland.
Water supply for current (1981-2010) and future (2070-2099) climate conditions was simulated using the hydrological model PREVAH. For modeling current water supply, observed meteorological time series were used as input, while simulated meteorological time series derived from 39 model chains of the CH2018 initiative were used as an input for simulating future climate conditions.

Water demand was estimated for six categories:

- 1) Drinking water (households and tourism),
- 2) industry (second and third sector),
- 3) artificial snow production,
- 4) agriculture (irrigation and livestock feeding),
- 5) ecology (residual flows), and
- 6) hydropower.

Future estimates consider changes in demand related to population growth and changes in the hydrological conditions.
Storage volumes are provided for natural lakes (storage capacities and usable volumes), artificial reservoirs, reservoirs for artificial snow production, and drinking reservoirs.

A detailed description of the simulation and estimation procedures can be found in

*  Brunner, M.I., Björnsen Gurung, A., Zappa, M., Zekollari, H., Farinotti, D., Stähli, M., 2019. Present and future water scarcity in Switzerland: Potential for alleviation through reservoirs and lakes. Sci. Total Environ. 666, 1033–1047. https://doi.org/10.1016/j.scitotenv.2019.02.169.

This dataset contains the following information:

1.	Shapefile with the 307 medium-sized Swiss catchments.
2.   Textfiles with the water supply simulations for the control run and the 39 climate model chains (one file per chain) at daily resolution for the 307 catchments.
3.	Textfiles with the current and future demand estimates per category at monthly resolution for the 307 catchments.
4.	Textfiles with the storage volumes per category and catchment.

reservoirs

display_name: reservoirs

water-demand

display_name: water-demand

water-scarcity

display_name: water-scarcity

water-supply

display_name: water-supply

en: Hydro-CH2018 reservoirs


maintainer: Felix Gugerli

en: melanargia-galathea genetic-structure conservation-genetics monitoring genetic-diversity

en:
Individual genotypes assessed at six nuclear microsatellite loci (two alleles per locus) for individuals of the butterfly Melanargia galathea (Marbled white) that were collected throughout Switzerland, along the regular grid of the Biodiversity Monitoring (BDM) of Switzerland. For each individual, the sampling site (number) and the genotype are given. Note that due to privacy restrictions, the original geographic coordinates remain disclosed. For original coordinates, data holders should be contacted (Swiss Federal Office for the Environment; Biodiversity Monitoring Switzerland).
The data refer to the following publication: Terzer et al., Distinct spatial patterns of genetic structure and diversity in the butterfly Marbled White (Melanargia galathea) inhabiting fragmented grasslands. Conservation Genetics, https://doi.org/0.1007/s10592-023-01593-4.

conservation-genetics

display_name: conservation-genetics

genetic-diversity

display_name: genetic-diversity

genetic-structure

display_name: genetic-structure

melanargia-galathea

display_name: melanargia-galathea

monitoring

display_name: monitoring

en: Nuclear microsatellite genotypes of the butterfly Melanargia galathea


maintainer: James W. Kirchner

en: streamflow plynlimon catchment precipitation tracer chloride stable-water-isotopes deuterium

en: 7-hourly stable water istopes

en: Data set of 7-hourly stable water isotope data measured at Carreg Wen (precipitation) and Upper Hafren (streamflow).

en: Data Set Documentation

en: This file contains a documentation of the data sets, including references to other helpful documentations.

en: Weekly stable water isotopes

en: Data set of weekly stable water isotope data collected at Carreg Wen (precipitation) and Lower Hafren and Tanllwyth (streamflow).

en: The data base contains timeseries of stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK. One data set contains weekly stable water isotope data from the Lower Hafren and Tanllwyth catchments, and the other data set contains 7-hourly stable water isotope data from Upper Hafren. Both data sets also include chloride concentrations in precipitation and streamflow.

catchment

display_name: catchment

chloride

display_name: chloride

deuterium

display_name: deuterium

plynlimon

display_name: plynlimon

precipitation

display_name: precipitation

stable-water-isotopes

display_name: stable-water-isotopes

streamflow

display_name: streamflow

tracer

display_name: tracer

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Stable water isotopes in precipitation and streamflow at Plynlimon, Wales, UK


maintainer: Yaquan Chang

en: phytodiversity habitat-heterogeneity hypervolume model-residuals hengduan-mountains

en: Plant range map at Hengduan scale

en: This is the plant range map at the Hengduan mountain scale based on species distribution model, elevation, and county level distribution information

en: Hengduan plant family richness map

en: This is the family level plant richness map in the Hengduan mountain scale at 1km resoution

en: Eurasia SR and heteorgeneity

en: This table is used for the Eurasia scale analyses, including both family level species richness map and different heterogeneity predictors

mimetype: text/csv

en: Eurasia plant family richness map

en: This is the plant family level richness map at the Eurasia scale calculated from https://www.nature.com/articles/s41597-021-00997-6

en: HDM heterogeneity scales

en: The Heterogeneity matrics in the Hengduan mountain scale

en: This research data is used to re includes 1 km resolution seed plant species range maps for the Hengduan mountain region (southwest China), elevation information for each species, family-level plant richness data, and habitat heterogeneity data at both Eurasia and Hengduan mountain regions. This research data includes 1 km resolution seed plant species range maps for the Hengduan mountain region (southwest China), elevation information for each species, family-level plant richness data, and habitat heterogeneity data at both Eurasia and Hengduan mountain regions.

habitat-heterogeneity

display_name: habitat-heterogeneity

hengduan-mountains

display_name: hengduan-mountains

hypervolume

display_name: hypervolume

model-residuals

display_name: model-residuals

phytodiversity

display_name: phytodiversity

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Phytodiversity is associated with habitat heterogeneity from Eurasia to Hengduan


en: landslide-early-warning soil-moisture soil-water-content soil-temperature soil-water-matrix-potential

en: In-situ soil moisture measurements, Wasen i.E., steep slope, since 2019

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, and two additional soil temperature measurements (oC), air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: since April 2019.
Location: steep hillslope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Wasen i.E., flat location, 2019-2023

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, and two additional soil temperature measurements (oC), air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2019-Dec 2023.
Location: flat terrain, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Ranflüh, since 2021

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, as well as air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: since April 2021.
Location: hillslope, meadow
For a detailed description of site, soil and vegetation: see attached document.
Update 2025:
The “precipitation” column was set to not available (NA) for periods when the pluviometer was identified as clogged. These periods were assigned (i) based on regular maintenance of the measurement station and (ii) irregular behavior of the measurement series compared to the precipitation signal from the other nearby measurement stations.

en: In-situ soil moisture measurements, Ranflüh, 2021-2023

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, as well as air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: April 2021-Dec 2023.
Location: hillslope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Langnau i E, since 2021

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each. Meteorological variables, such as air temperature or precipitation can be received from MeteoSwiss.
Time intervall: 1 hour. Measurement period: since June 2021.
Location: flat terrain, meadow (measurement site of MeteoSwiss)
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Trub, since 2021

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, as well as air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: since April 2021.
Location: slope, meadow
For a detailed description of site, soil and vegetation: see attached document.

en: Detailed description of soil moisture measurment sites, soil properties and sensor installations (in German)

en: In-situ soil moisture measurements, Napf, since 2021

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each. Meteorological variables such as air temperature or precipitation can be received from MeteoSwiss.
Time intervall: 1 hour.
Measurement period: since June 2021
Location: flat terrain, meadow (official MeteoSwiss station)
For a detailed description of site, soil and vegetation: see attached document.

en: In-situ soil moisture measurements, Wasen i.E., flat location, since 2019

en:
Volumetric soil water content (m3 m-3), soil water potential (mbar) and soil temperatures (oC) measured in two profiles and four depths each, and two additional soil temperature measurements (oC), air temperature (oC) and precipitation (mm). Time intervall: 1 hour. Measurement period: since April 2019.
Location: flat terrain, meadow
For a detailed description of site, soil and vegetation: see attached document.
Updates 2025:
The “precipitation” column was set to not available (NA) for periods when the pluviometer was identified as clogged. These periods were assigned (i) based on regular maintenance of the measurement station and (ii) irregular behavior of the measurement series compared to the precipitation signal from the other nearby measurement stations.
Column “VWC_0.7m_right” and “ST_5TE_0.7m_right” were set to not available (NA) for the period after the 2023-06-19T14:00:00Z due to irregular behavior of the ECH2O - 5TE sensor.

en: In the context of landslide early warning research, soil moisture (e.g. volumetric soil water content and soil water potential) has been measured at six locations in the Napf-region (Emmental, central Switzerland) since April 2019. Here, we provide the hourly mean values of all sensors from all 6 locations after a comprehensive data control, filtering and aggregation (from 10-min to 1-hour values). A sub-set of these data (for the locations Wasen i.E.) has previously been published in envidat.ch at https://www.doi.org/10.16904/envidat.369 applying the same data post-processing method. The dataset is complemented with meteorological data (locally measured air temperature and precipitation) as well as soil temperature. A detailed description of the sites and measurement installations can be found in a separate report (attached with the data).

landslide-early-warning

display_name: landslide-early-warning

soil-moisture

display_name: soil-moisture

soil-temperature

display_name: soil-temperature

soil-water-content

display_name: soil-water-content

soil-water-matrix-potential

display_name: soil-water-matrix-potential

educ

en: Education, culture and sport

en: In-situ soil moisture measurements Napf-region


maintainer: Lorenz Walthert

en: water-potential root-distribution water-use-strategy stomatal-stringency anisohydric

en: The data file contains the data shown in the Figures 2-7 in Walthert et al. (2024).

en:
This dataset represents the data shown in the Figures 2 - 7 of Walthert et al. (2024): Coordination between degree of isohydricity and depth of root water uptake in temperate tree species. Science of the Total Environment (https://doi.org/10.1016/j.scitotenv.2024.174346). A detailed methodical description of the data can be found in the Methods section of the paper.

Abstract
In an increasingly dry environment, it is crucial to understand how tree species use soil water and cope with drought. However, there is still a knowledge gap regarding the relationships between species-specific stomatal behaviour, spatial root distribution, and root water uptake (RWU) dynamics.
Our study aimed to investigate above- and below-ground aspects of water use during soil drying periods in four temperate tree species that differ in stomatal behaviour: two isohydric tracheid-bearing conifers, Scots pine and Norway spruce, and two more anisohydric deciduous species, the diffuse-porous European beech, and the ring-porous Downy oak. From 2015 to 2020, soil-tree-atmosphere-continuum parameters were measured for each species in monospecific forests where trees had no access to groundwater. The hourly time series included data on air temperature, vapour pressure deficit, soil water potential, soil hydraulic conductivity, and RWU to a depth of 2 m. Analysis of drought responses included data on stem radius, leaf water potential, estimated osmotically active compounds, and drought damage.
Our study reveals an inherent coordination between stomatal regulation, fine root distribution and water uptake. Compared to conifers, the more anisohydric water use of oak and beech was associated with less strict stomatal closure, greater investment in deep roots, four times higher maximum RWU, a shift of RWU to deeper soil layers as the topsoil dried, and a more pronounced soil drying below 1 m depth. Soil hydraulic conductivity started to limit RWU when values fell below 10-3 to 10-5 cm/d, depending on the soil. As drought progressed, oak and beech may also have benefited from their leaf osmoregulatory capacity, but at the cost of xylem embolism with around 50% loss of hydraulic conductivity when soil water potential dropped below -1.25 MPa. Consideration of species-specific water use is crucial for forest management and vegetation modelling to improve forest resilience to drought.

anisohydric

display_name: anisohydric

root-distribution

display_name: root-distribution

stomatal-stringency

display_name: stomatal-stringency

water-potential

display_name: water-potential

water-use-strategy

display_name: water-use-strategy

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Water-use strategies of temperate tree species


maintainer: Sebastian Schlögl

en: turbulent-sensible-heat-fluxes atmospheric-turbulence stable-boundary-layer atmosphere snow

en: Turbulence data PM07

en: SEE

en: Turbulence data AA00

en: sensor in 25 m height

en: Turbulence data WFJ07

en: upper sensor

en: NWW

en: lower sensor

en: sensor in 0.2 m height

en: Turbulence data WFJ11

en: Turbulence data GR00

en: sensor in 1 m height

en: sensor in 2 m height

en:
We used five different atmospheric turbulence datasets from four test sites, with these sites showing differences in their topographical characteristics. We chose one typical alpine test site with high topographical complexity (Weissfluhjoch, Davos, Switzerland) and three test sites consisting of one glacier site (Plaine Morte, Crans-Montana, Switzerland) and two polar sites (Greenland and Antarctica) representing a quasi-ideal site with homogeneous surface and quasi infinite fetch in all directions.
The turbulent sensible heat flux was calculated using the eddy-covariance method. Note that the sonic temperature fluctuations have been converted into virtual temperature fluctuations.
Three-dimensional wind velocity and air temperature were processed using a linear detrending (Rannik and Vesala, 1999) and a planar fit approach (Massmann and Lee, 2002) to rotate the coordinate system. Air temperature, relative humidity and air pressure from weather stations were used to calculate air properties, which are required for the data processing. The weather stations are located in the immediate vicinity of the turbulence tower and are affected by the same air masses. Turbulence data were averaged to 30-min intervals, whilst changing to a 15-min time interval marginally affects the heat fluxes at the Weissfluhjoch test site (Mott et al., 2011). Note that we define a negative sensible heat flux as being directed towards the snow surface and a positive sensible heat flux as being directed upwards.
The selected datasets and corresponding test sites are briefly introduced below:

Weissfluhjoch 2007 (WFJ07): A vertical set-up of two three-dimensional ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) was used at the traditional field site Weissfluhjoch (2540 m asl.) to measure three-dimensional wind velocity and air temperature at a frequency of 20 Hz. The sensors were mounted 3 m and 5 m above the ground and provided reliable data for 50 days between 11 February 2007 and 24 April 2007. Further information on the field campaign can be found in Stössel et al. (2010) and Mott et al. (2011).

Weissfluhjoch 2011-13 (WFJ11): Three-dimensional wind velocity and air temperature were recorded at 5 m above the ground at a frequency of 10 Hz with a three-dimensional ultrasonic anemometer (CSAT3). The analysis was conducted for data obtained between February and March in the years 2011-13.

Plaine Morte 2007 (PM07): Two three-dimensional ultrasonic anemometers (CSAT3) were installed on a horizontal boom facing opposite directions (west-north-west vs. east-south-east) at 3.75 m above the ground to measure air temperature and three-dimensional wind velocity at 20 Hz. The data were collected at the almost flat field site on the Plaine Morte glacier (2750 m asl.) near Crans-Montana, Switzerland from February to April 2007. High quality meteorological data were additionally recorded and used to force the model. A detailed description about the set-up at the Plaine Morte glacier can be found in Huwald et al. (2009) and Bou-Zeid et al. (2010).

Greenland 2000 (GR00): High-frequency three-dimensional ultrasonic anemometer measurements (CSAT3) were recorded at 50 Hz at the Summit Camp (72.3 °N, 38.8 °W, 3208 m asl.) located on the northern dome of the Greenland ice sheet. Data were collected at 1 m and 2 m above the snow surface during summer in 2000 and 2001. Additionally, meteorological measurements were obtained for the post processing and used to force the model. More information about the field campaign can be found in Cullen et al. (2007, 2014).

Antarctica 2000 (AA00): A set-up of three vertical three-dimensional ultrasonic anemometers (DA-600, Kaijo Denki) were installed at Mizuho Station (70°42' S, 44°20' E, 2230 m asl.) in Eastern Antarctica at 0.2, 1 and 25 m and recorded turbulence data at a frequency of 100 Hz from October to November 2000. Longwave and shortwave radiation, relative humidity, air and snow surface temperature were additionally measured and used to force the model. More information about the field campaign can be found in Nishimura and Nemoto (2005).

atmosphere

display_name: atmosphere

atmospheric-turbulence

display_name: atmospheric-turbulence

snow

display_name: snow

stable-boundary-layer

display_name: stable-boundary-layer

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

en: How do stability corrections perform in the stable boundary layer over snow?


en: meteorological-data antarctica snowmicropen terrestrial-laser-scanning mass-flux drifting-snow

en: README

en: Describes the dataset in detail

en: Dataset

en: Links to the dataset

en:
This dataset contains the data acquired during the expedition to Princess Elisabeth Antarctica Station in December 2016 and January 2017. The dataset consits of meterorological data, drifting snow mass flux data, SnowMicroPen data and Terrestrial Laser Scanning data.

Please refer to the README for more information about the data.

This dataset is the basis of the following publication:

Sommer, C. G., Wever, N., Fierz, C., and Lehning, M.: Wind-packing of snow in Antarctica, The Cryosphere Discuss., https://doi.org/10.5194/tc-2018-36, in review, 2018.

antarctica

display_name: antarctica

drifting-snow

display_name: drifting-snow

mass-flux

display_name: mass-flux

meteorological-data

display_name: meteorological-data

snowmicropen

display_name: snowmicropen

terrestrial-laser-scanning

display_name: terrestrial-laser-scanning

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Expedition to Princess Elisabeth Antarctica Station, 2016/2017