wind-crust-formation-snowmicropen-data

title_for_slug: wind-crust-formation-snowmicropen-data

en: wind-packing snowmicropen wind-crust smp snow

en: README

en: Describes the dataset in detail

en: SMP data

en: Links to the dataset

en: Processing scripts

en: Contains the R-scripts used to process the SMPs

en:
This dataset contains the SnowMicroPen (SMP) data from 38 wind tunnel experiments on wind-packing / wind crust formation. These experiments were performed in the winters 2015/16 and 2016/17 and include more than 1000 SMP measurements.

The SMPs are organized per experiment. Each experiment subfolder contains the processed SMP profiles and some additional files.

Please refer to the README for more details on the data. The processing scripts are available for download as well. The scripts are mainly provided as documentation and would need to be adjusted to be used.

This dataset is the basis of the following publication:

Sommer C.G., Lehning M., & Fierz C. (2017). Wind tunnel experiments: Saltation is necessary for wind-packing. Journal of Glaciology, 63(242), 950-958. doi:10.1017/jog.2017.53

smp

display_name: smp

snow

display_name: snow

snowmicropen

display_name: snowmicropen

wind-crust

display_name: wind-crust

wind-packing

display_name: wind-packing

en: Wind crust formation: SnowMicroPen data


tree-ring-laser-ablation-data

maintainer: Paula Ballikaya

title_for_slug: tree-ring-laser-ablation-data

en: tree-rings dendrochemistry air-pollution dendrochronology laser-ablation

state: active

type: dataset

en: Laser ablation data

format: SERVICE

en:
This dataset contains the values of several chemical elements (Mg, Al, Si, S, K, Ca, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Sr, Tl, Pb, Bi) measured in the latewood of tree rings of Mongolian oak from Harbin, China, at a 5-year resolution. Due to the lack of a suitable reference material for wood, absolute concentration was not calculated, and the ratio between the chemical element and 13C was taken as proxy for the element signal.

In Harbin, one of the largest cities and most important industrial centers in northeastern China, air quality monitoring systems were built only by the end of 2015 to meet the national requirements. Thus, dendrochemical analyses could be used as a tool to complement for the lack of air quality data over longer periods of time, allowing for the reconstruction of the temporal trend of trace metals. Our main scopes were to: (a) assess the chemical composition of Quercus mongolica Fisch. ex Ledeb. tree rings from Harbin using a recently developed system of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS), (b) identify the main chemical elements which
derived from air pollution and may be used as indicators over the period 1965–2020 in Harbin, while excluding those that were controlled by physiological processes in the tree, and (c) reconstruct the history of pollution in Harbin by comparing the tree-ring chemical composition of recent decades with that of previous decades, in trees growing in the highly polluted city of Harbin and in trees growing in a control site 90 km away from major pollution sources.

Briefly, the temporal trend of some elements was influenced by physiological factors, by environmental factors such as pollution, or influenced by both. Mg, K, Zn, Cu, Ni, Pb, As, Sr and Tl showed changes in pollution levels over time.

air-pollution

display_name: air-pollution

dendrochemistry

display_name: dendrochemistry

dendrochronology

display_name: dendrochronology

laser-ablation

display_name: laser-ablation

tree-rings

display_name: tree-rings

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Tree-ring laser ablation data


maintainer: EnviDat Support

en: mixing-models stable-isotopes end-member-mixing-analysis tracers emma eemma

en: vignette data

media_type: text/plain

en: A simple data set for the vignette script

format: TXT

mimetype: text/plain

en: eemma vignette script

en: An R script for the vignettes (simple data analysis demonstrations) shown in the user's guide

format: OCTET

mimetype: application/octet-stream

en: An R script that performs ensemble end-member mixing analysis

en: eemma user's guide

media_type: application/pdf

en: A brief user's guide to EEMMA, with illustrations using a simple data set

format: PDF

mimetype: application/pdf

en:
The R script eemma.R, which implements Ensemble End-Member Mixing Analysis (EEMMA) to estimate source fractions in mixtures, exploiting information contained in time-series correlations among tracer time series.

A brief user's guide, a demonstration script, and a demonstration data set are also provided, to accompany Kirchner, J.W., Mixing models with multiple, overlapping, or incomplete end-members, quantified using time series of a single tracer, Geophysical Research Letters, 2023.

The user's guide is available for public use under Creative Commons CC-BY-SA. Public use of the scripts is permitted under GNU General Public License 3 (GPL3); for details see https://www.gnu.org/licenses/

eemma

display_name: eemma

emma

display_name: emma

end-member-mixing-analysis

display_name: end-member-mixing-analysis

mixing-models

display_name: mixing-models

stable-isotopes

display_name: stable-isotopes

tracers

display_name: tracers

en: eemma.R, an R script for Ensemble End-Member Mixing Analysis


maintainer: Mountain Hydrology and Mass Movements

en: natural-hazard-fatalities windstorm-fatalities flood-fatalities rockfall-fatalities landslide-fatalities lightning-fatalities ice-avalanche-fatalities earthquake-fatalities debris-flow-fatalities

media_type: text/csv

en: Natural hazard fatalities per year in Swizterland since 1946.

format: CSV

mimetype: text/csv

en:
This dataset contains the number of fatalities due to flood, debris flow, landslide, rockfall, windstorm, lightning, ice avalanche, earthquake and other processes like roof avalanche or lacustrine tsunami for each year since 1946.
The following information is contained (by column and column title):

* year
* total number of hazard fatalities
* number of fatalities by flood (German: Hochwasser, Überschwemmung). Flood includes people drowned in flooded or inundated areas or carried away in streams under high-water conditions.
* number of fatalities by debris flow (German: Murgang).
* number of fatalities by landslide (German: Erdrutsch). Landslide includes people killed by landslides and hillslope debris flows (German: Hangmure).
* number of fatalities by rockfall (German: Steinschlag, Fels- und Bergsturz).
* number of fatalities by windstorm (German: Sturm). Windstorm includes people killed by falling objects or trees during very strong wind conditions and people who drowned in lakes because their boat capsized during such conditions.
* number of fatalities by lightning (German: Blitz).
* number of fatalities by ice avalanche (German: Eislawine).
* number of fatalities by earthquake (German: Erdbeben).
* number of fatalities by other processes like roof avalanche, lacustrine tsunami (German: andere Prozesse wie Dachlawine, Tsunami im See).

The data was collected based on newspaper research. For more information please refer to

_Badoux, A., Andres, N., Techel, F., and Hegg, C.: Natural hazard fatalities in Switzerland from 1946 to 2015, Nat. Hazards Earth Syst. Sci., 16, 2747-2768, https://doi.org/10.5194/nhess-16-2747-2016, 2016._

The data collection is financed by the FOEN (with exception of the collection of the avalanche fatalities). The data contains the official statistics of the FOEN on fatalities due to flood, debris flow, landslide, rock fall and avalanche.

Restrictions: The data set is not complete. Only fatalities in or around settlements and on open transportation routes are included. More precisely, fatalities were not collected, when persons exposed themselves to a great danger on purpose. Or fatalities during leisure activities which are connected to a higher risk were not included (this includes e.g. canoeing or river surfing during flood, canyoning, mountaineering, climbing, walking or driving on a closed road).

Fatalities by avalanches are collected at the WSL Institute for Snow and Avalanche Research SLF. You can download the avalanche fatalities per hydrological year [here](https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936) and per calendar year [here](https://www.envidat.ch/dataset/avalanche-fatalities-per-calendar-year-since-1936). For a direct comparison with the fatalities presented here, please download the data set with the calendar years and do not consider fatalities in the backcountry (tour) or in terrain close to ski areas (offpiste).

debris-flow-fatalities

display_name: debris-flow-fatalities

earthquake-fatalities

display_name: earthquake-fatalities

flood-fatalities

display_name: flood-fatalities

ice-avalanche-fatalities

display_name: ice-avalanche-fatalities

landslide-fatalities

display_name: landslide-fatalities

lightning-fatalities

display_name: lightning-fatalities

natural-hazard-fatalities

display_name: natural-hazard-fatalities

rockfall-fatalities

display_name: rockfall-fatalities

windstorm-fatalities

display_name: windstorm-fatalities

en: Number of natural hazard fatalities per year in Switzerland since 1946


maintainer: Stephanie Mayer

en: snowpack-simulation rutschblock snowpack snow-profiles failure-layer snow-stratigraphy snow-instability

en: Observed snow profiles

en: Observed snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding simulated profile in the "simulated_profiles" folder. One row corresponds to one observed snow layer. The content of the columns is described in Table 2 of the ReadMe file.

en: ReadMe

en: ReadMe file explaining data structure and content

en: DAV data set: Properties of observed snow profiles and simulated failure layers

en:
For each profile pair from the DAV data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. The content of the columns is explained in Table 1 of the ReadMe file. Only those profile pairs which fulfilled predefined similarity criteria (column
"similarity_obs_sim" = 1) and which belonged to the stability classes "stable" and "unstable" (column "stability_class"
= 0 or 1) were used to train the RF model. Please note that for each of the two snow profiles with RB score 7 (profile
IDs 7228 and 9526), three additional layers were included in this data set to obtain a balanced set of training data (73
unstable and 73 stable profiles).

en: SWISS data set: Properties of observed snow profiles and simulated failure layers

en: For each profile pair from the SWISS data set, this file contains one row with information on the observed snow stability and all extracted features describing the simulated failure layers. Please note that only those profile pairs which fulfilled the similarity criteria (column similarity_obs_sim = 1, 121 profiles) were used to validate the RF model. The content of the columns is explained in Table 1 of the ReadMe file.

en: Simulated snow profiles

en: Simulated snow stratigraphy in form of one *.csv-file per snow profile from the DAV and SWISS data sets (in respective subfolders). Each file is named after the profile ID which allows identifying the corresponding observed profile in the "observed_profiles" folder. One row corresponds to one simulated snow layer. The content of the columns 1-7 is described in Table 3 of the ReadMe file. The remaining columns (8-31) contain all features that were used in the development of the RF model and are described in Table 1 of the ReadMe file.

en:
This data set includes information on all observed and simulated snow profiles that were used to train and validate the
random forest model described in Mayer et al. (2022). The RF model was trained to assess snow instability from simulated snow stratigraphy. The data set contains observed snow profiles from the region of Davos (DAV subset, 512 profiles) and from all over Switzerland (SWISS subset, 230 profiles). For each observed snow profile, there is a corresponding simulated profile which was obtained using meteorological input data for the numerical snow cover model SNOWPACK. The information on the observed snow profile contains a Rutschblock test result including the depth of the failure interface. As part of the study described in Mayer et al. (2022), each observed snow profile was manually compared to its simulated counterpart and the simulated layer corresponding to the Rutschblock failure layer was identified.

The data are provided in the following form: one file each per observed and simulated snow profile (2x512 files DAV, 2x230 files SWISS), two files (1 file DAV, 1 file SWISS) containing the observed information on snow instability, the allocation between observed and simulated failure layer, and all features extracted from the simulated weak layers that were used to develop the RF model.

failure-layer

display_name: failure-layer

rutschblock

display_name: rutschblock

snow-instability

display_name: snow-instability

snow-profiles

display_name: snow-profiles

snow-stratigraphy

display_name: snow-stratigraphy

snowpack

display_name: snowpack

snowpack-simulation

display_name: snowpack-simulation

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Observed and simulated snow profile data


maintainer: Michael Lombardo

en: snow transport pore-water soil measurements water

en: Description of the videos

media_type: application/zip

en: Videos of the capillary rise experiments

format: ZIP

en: The Hydrus files used for the inverse fitting of the hydraulic conductivity.

en: Descriptions of the nomenclature, Hydrus files, and videos.

en: This dataset consists of data related to capillary rise experiments performed with neutron radiography. There are 4 videos of capillary rise experiments as well as the files used to perform the inverse fitting with Hydrus. The videos show the upward flow of water in glass columns filled with sand and snow or sand, gravel, and snow. The videos show the 2D evolution of the unitless optical density with time. The Hydrus files were used to fit the parameter values of the Mualem-van Genuchten model. The experiments were performed at the Paul Scherrer Institute (PSI) in Villigen, Switzerland.

measurements

display_name: measurements

pore-water

display_name: pore-water

snow

display_name: snow

soil

display_name: soil

transport

display_name: transport

water

display_name: water

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Capillary rise rise experiments in snow using neutron radiography


maintainer: Virginie Marques

en: teleo edna fish-composition coral-reef environmental-dna laperouse indian-ocean marine

en: Data access

en: Please use cyberduck to download for the moment

en:
Fish environmental DNA data set collected in the shallow seamount of La Pérouse located between Madagascar and Réunion Island

In 2019, we sampled the shallow seamount of La Pérouse, located between Madagascar and Réunion Island in the WIO. La Pérouse is an extinct volcano with a summit depth at 60 m below the sea surface. The plateau of the summit has a maximum length of 12 km and a maximum width of 4 km. One side of the seamount might have collapsed in the past, leading to a less common crescent-shaped summit. The abyssal plains that surround this isolated pinnacle are at a depth of 5000 m. Despite its proximity to Réunion Island (160 km northwest), La Pérouse and its surroundings are still poorly studied.
To sample eDNA in this location we used a submersible pump (Subspace, Geneva, Switzerland; nominal flow of ~ 1.0 L/min) to collect samples at various depths during close circuit rebreather dives. The pump has an internal battery and can be activated underwater allowing in situ filtration directly at the targeted habitat and depth. The filtration lasted for 30 min to collect a total water volume of ~ 30 L. During close circuit rebreather dives, water samples from various depths, ranging from 60 to 140 m below the sea surface, were collected using only the Submersible method (eight stations: no replicates). Out of the eight water samples, six were collected during the day, while two were collected at night (IS2_1 at 62 m and IS7_1 at 100–125 m). We applied this filtration protocols to collect and filter water throughout a VigiDNA® 0.2 μM cross-flow filtration capsule (SPYGEN, le Bourget du Lac, France) using disposable sterile tubing for each filtration capsule. After the filtration process, the remaining water in the capsules was emptied. The capsules were then filled with 80 ml of lysis conservation buffer (CL1 buffer SPYGEN, le Bourget du Lac, France) and stored at room temperature in the dark. At La Pérouse, a total of eight water samples were collected during the MONT LA PÉROUSE expedition (https://gombessa-expeditions.com/mont-la-perouse/) on board the ship La Curieuse to the seamount La Pérouse from October 27th to November 5th 2019. We followed a strict contamination control protocol in both field and laboratory stages. Each water sample processing included the use of disposable gloves and single-use filtration equipment to avoid any risk of contamination. Libraries were prepared with ligation using the MetaFast protocol (Fasteris).
Data content:
	* rawdata/: contains the raw reads for each individual sample. One archive contains the paired-end reads specified by the _R1 or _R2 suffix as well as individually tagged PCR replicates (if available) together with an archive containing all extraction and PCR blank samples of the library. Reads have been demultiplexed using cutadapt but not trimmed, individual demultiplexing tags and primers remain present in the sequences.
	* taxadata/: contains the table with all detected taxonomy for each sample after bioinformatic processing (see Polanco et al. 2020 for details; https://doi.org/10.1002/edn3.140) and associated field metadata.
	* metadata/: contains two metadata files, one related to the data collected in the field for each filter, and the second related to the sequencing process in the lab (including the tag sequence, library name, and marker information for each sample)

coral-reef

display_name: coral-reef

edna

display_name: edna

environmental-dna

display_name: environmental-dna

fish-composition

display_name: fish-composition

indian-ocean

display_name: indian-ocean

laperouse

display_name: laperouse

marine

display_name: marine

teleo

display_name: teleo

en: Environmental DNA Marine France LaPerouse 2019


en: budburst chilling spongy-month phenology hatch

en: 3 R-Scripts used for the analyses of the temperature, phenology and performance/preference tests

en: Phenology and performance/preference tests Data

en:
-"Synchronex_Cuttings_Pheno.txt" provides the budburst date ('Stage 2') of each twig of the six studies species in the four different temperature treatments ("ambient", "a+5"=Ambient +5°C, 'Greenhouse-5'= Greenhouse at temperature >5°C, 'Greenhouse_10' = Greenhouse at temperature >10°C); 'Success' give the percentage of buds within the twig that succeeded to reach at least stage 2 during the experiment.

'Synchronex-Gypsy.txt' provides the number of eggs that have hatched at each monitoring date (Day of the year in columns); "DOY_hatch_1" corresponds to the first DOY when at least one egg has hatched; "Replicate_egg_mass" correspond to the egg mass replicate (1 to 5)

'PerformanceTest_GypsyMoth.txt' provides the biomass in mg of the caterpillars fed with fresh leaves of each tested tree species during one week. "Fresh_alive" is the biomass of only the living caterpillars after 1 week and "Freshpermoth" corresponds the weight per living caterpillar (Fresh alive/Nalive)

'PreferenceTest_All_species.txt' provides the total surface of leaf disc of each tested tree species remaining after exposing 5 caterpillars to these leaves during 24H. "Total_area" is the surface of the disc of each species measured after 24h exposed to the spongy moth first instars. For each species 'control' means the surface of the disc after 24H without any exposure to the larvae. 'EatenPercent correspond to the percentage surface loss compared to the control.

en: Temperature data Spongy moth experiment

en:
4 files with hourly temperature recorded at the height of buds in each of the four temperature treatments:
- Winter6: greenhouse where temperature was kept >6°C over winter
- Winter10: greenhouse where temperature was kept >10°C over winter
- OTC_Ambient: Open Top Chamber at Ambient temperature
- OTC_Warm: Open Top Chamber at +3.5°C warmer temperature

en:
The files correspond to the data and R-script used for the analyses of the following paper "Feasting on the ordinary or starving for the exceptional: phenological synchrony between spongy moth and budburst of European trees in a warmer climate" published in Ecology and Evolution by Vitasse et al. 2023.
There are three zip files corresponding to the Temperature data, phenology/preference/performance tests and R-Scripts for the analyses.

Input data:
'Synchrony_Cuttings_Pheno.txt':

budburst

display_name: budburst

chilling

display_name: chilling

hatch

display_name: hatch

phenology

display_name: phenology

spongy-month

display_name: spongy-month

en: Synchrony between spongy moth hatching and leaf phenology of temperate trees


en: snow-depth canopy-height airborne-laser-scanning forest-structure snow-distribution

en: Canopy height maps

en: Canopy height maps of each of the three field areas Davos, Engadine and Grand Mesa

mimetype: application/zip

en: Snow depth maps

en: Snow depth maps from two snow-on flights at each of the three field areas Davos (March 20th and 31st 2017), Engadien (March 20th and 31st, 2017) and Grand Mesa (February 8th and 16th, 2017)

en: Terrain elevation maps

en: Digital elevation model computed from snow-off flights for each of the field areas Davos, Engadine and Grand Mesa

en: Readme

en:
This dataset includes snow depth, canopy height and terrain elevation maps of forest stands in the Grisons (CH) and at Grand Mesa (CO,USA) derived from airborne lidar. Data were acquired i) within a pilot mission of NASA's Airborne Snow Observatory in the Swiss Alps in March 2017 and ii) during NASA’s SnowEx campaign at Grand Mesa in February 2017. Snow depth maps are available for two dates separated by approx.1 week, and include an area of ca. 0.5km2 for each of the three sites Davos, Engadine and Grand Mesa.
All data were presented and analyzed in the publication 'Revisiting Snow Cover Variability and Canopy Structure within Forest Stands: Insights from Airborne Lidar Data' (Mazzotti et al., 2019, WRR, doi: 10.1029/2019WR024898). This publication must be cited when using this dataset.

Paper Citation:
 > _Giulia Mazzotti; William Ryan Currier; Jeffrey S. Deems; Justin M. Pflug; Jessica D. Lundquist; Tobias Jonas (2019). Revisiting Snow Cover Variability and Canopy Structure Within Forest Stands: Insights From Airborne Lidar Data. Water Resources Research, 55, 6198– 6216, [doi: 10.1029/2019WR024898](https://doi.org/10.1029/2019WR024898)._

airborne-laser-scanning

display_name: airborne-laser-scanning

canopy-height

display_name: canopy-height

forest-structure

display_name: forest-structure

snow-depth

display_name: snow-depth

snow-distribution

display_name: snow-distribution

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: ALS-based snow depth and canopy height maps from flights in 2017 (Grisons, CH and Grand Mesa, CO)


en: complex-terrain wrf grayzone cosmo-wrf numerical-simulation

en:
This dataset contains simulation data for *"Influence of Air Flow Features on Alpine Wind Energy Potential" (Kristianti et al., 2024).*
•	The WRF_dia2702 and WRF_dia1103 folders contain the namelist.wps, namelist.input, and output files from the simulation in the Diablerets region on 27/02/2021 and 11/03/2021, respectively.
•	The WRF_luk2310 and WRF_luk0912 folders contain the namelist.wps, namelist.input, and output files from the simulation in the Lukmanier region on 23/10/2020 and 09/12/2020, respectively.
•	The postprocessing file contains Python codes used to create figures in Kristianti et al. (2024).
**Notes:**
•	Topography input is provided by Gerber et al. (2021).
•	Simulations are run using the COSMO-WRF model developed by Gerber et al. (2018).
•	Visualization by Python code uses wrf-python provided by Ladwig et al. (2017).
*This dataset was produced by the EDGE consortium sponsored by the Swiss Federal Office of Energy's SWEET programme, Swiss National Science Foundation (SNSF): Grant 179130, and the Swiss National Supercomputing Centre (CSCS) projects s938, s1115 and s1242.*

complex-terrain

display_name: complex-terrain

cosmo-wrf

display_name: cosmo-wrf

grayzone

display_name: grayzone

numerical-simulation

display_name: numerical-simulation

wrf

display_name: wrf

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: COSMO-WRF Dataset for Swiss Alps Simulations in Gray-Zone Resolution


maintainer: Yohann Chauvier

en: survey-effort random-stratified-sampling environmental-stratification target-group cluster plant-species point-process-model independent-dataset background-data covariate-correction

en: Non-copyright data, scripts, diversity outputs

en:
Aim: While species distribution models (SDMs) are standard tools to predict species distributions, they can suffer from observation and sampling biases, particularly presence-only SDMs that often rely on species observations from non-standardized sampling efforts. To address this issue, sampling background points with a target-group strategy is commonly used, although more robust strategies and refinements could be implemented. Here, we exploited a dataset of plant species from the European Alps to propose and demonstrate efficient ways to correct for observer and sampling bias in presence-only models.

Innovation: Recent methods correct for observer bias by using covariates related to accessibility in model calibrations (classic bias covariate correction, Classic-BCC). However, depending on how species are sampled, accessibility covariates may not sufficiently capture observer bias. Here, we introduced BCCs more directly related to sampling effort, as well as a novel corrective method based on stratified resampling of the observational dataset before model calibration (environmental bias correction, EBC). We compared, individually and jointly, the effect of EBC and different BCC strategies, when modelling the distributions of 1’900 plant species. We evaluated model performance with spatial block split-sampling and independent test data, and assessed the accuracy of plant diversity predictions across the European Alps.

Main conclusions: Implementing EBC with BCC showed best results for every evaluation method. Particularly, adding the observation density of a target group as bias covariate (Target-BCC) displayed most realistic modelled species distributions, with a clear positive correlation (r≃0.5) found between predicted and expert-based species richness. Although EBC must be carefully implemented in a species-specific manner, such limitations may be addressed via automated diagnostics included in a provided R function. Implementing EBC and bias covariate correction together may allow future studies to address efficiently observer bias in presence-only models, and overcome the standard need of an independent test dataset for model evaluation.

background-data

display_name: background-data

cluster

display_name: cluster

covariate-correction

display_name: covariate-correction

environmental-stratification

display_name: environmental-stratification

independent-dataset

display_name: independent-dataset

plant-species

display_name: plant-species

point-process-model

display_name: point-process-model

random-stratified-sampling

display_name: random-stratified-sampling

survey-effort

display_name: survey-effort

target-group

display_name: target-group

en: Novel methods to correct for observer and sampling bias in presence-only species distribution models


en: climate-change air-temperature cmip5 orographic-precipitation precipitation-amount

en: Data Access

en:
Predicting future climatic conditions at high spatial resolution is essential for many applications in science. Here we present data for monthly time series of precipitation and minimum and maximum temperature for four downscaled global circulation models. We used model output statistics in combination with mechanistic downscaling (the CHELSA algorithm) to calculate mean monthly maximum and minimum temperatures, as well as monthly precipitation sums at ~5km spatial resolution globally for the years 1850-2100. We validated the performance of the downscaling algorithm by comparing model output with observed climates for the years 1950-2069.

CHELSA_cmip5_ts is licensed under a Creative Commons Attribution 2.0 Generic (CC BY 2.0) license.

air-temperature

display_name: air-temperature

climate-change

display_name: climate-change

orographic-precipitation

display_name: orographic-precipitation

precipitation-amount

display_name: precipitation-amount

en: High resolution monthly precipitation and temperature timeseries for the period 2006-2100


en: solar-radiation relative-humidity temperature growing-season-length soil-water-balance precipitation growing-degree-days

en: CHELSA-BIOCLIM+

en: Global extented set of bioclimatic variables at different temporal (e.g. monthly, annual, long term normals) resolution in Geotiff format.

format: GeoTIFF

en: CHELSA-BIOCLIM+ Technical Documentation

en: Technical documentation document including the variable names, units, scaling, offset, and background.

en: A multitude of physical and biological processes on which ecosystems and human societies depend are governed by climatic conditions. Understanding how these processes are altered by climate change is central to mitigation efforts. Based on mechanistically downscaled climate data, we developed a set of climate-related variables at yet unprecedented spatiotemporal detail as a basis for environmental and ecological analyses. We created gridded data for near-surface relative humidity (hurs), cloud area fraction (clt), near-surface wind speed (sfcWind), vapour pressure deficit (vpd), surface downwelling shortwave radiation (rsds), potential evapotranspiration (pet), climate moisture index (cmi), and site water balance (swb), at a monthly temporal and 30 arcsec spatial resolution globally starting 1980 until 2018. At the same spatial resolution, we further estimated climatological normals of frost change frequency (fcf), snow cover days (scd), potential net primary productivity (npp), growing degree days (gdd), and growing season characteristics for the periods 1981-2010, 2011-2040, 2041-2070, and 2071-2100, considering three shared socioeconomic pathways (SSP126, SSP370, SSP585) and five Earth system models. Time-series variables showed high accuracy when validated against observations from meteorological stations. Climatological normals were also highly correlated to observations although some variables showed notable biases, e.g., snow cover days (scd). Together, the data sets presented here allow improving our understanding of patterns and processes that are governed by climate, including the impact of recent and future climate changes on the world’s ecosystems and associated services to societies.

growing-degree-days

display_name: growing-degree-days

growing-season-length

display_name: growing-season-length

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

soil-water-balance

display_name: soil-water-balance

solar-radiation

display_name: solar-radiation

temperature

display_name: temperature

en: CHELSA-BIOCLIM+ A novel set of global climate-related predictors at kilometre-resolution


aerosol-data-weissfluhjoch

title_for_slug: aerosol-data-weissfluhjoch

en: particles linda ice-nucleation aerosol raclets inp

en: SMPS Dataset Weissfluhjoch

en: The SMPS file contains aerosol data (particle concentration, total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) in a size range between 12 and 460 nm (electrical mobility diameter) as well as instrument characteristics (sample temperature, pressure, relative humidity, mean free path and gas viscosity) in a temporal resolution of 2 minutes, with time in UTC, measured at Weissfluhjoch.

mimetype: application/x-netcdf

en: OPC-N3 Dataset Weissfluhjoch

en: Particle concentrations in a size range of 0.35 μm to 40 μm were measured with an OPC-N3 (Alphasense, Inc.) in a resolution of 20 seconds (time in UTC). PM₁, PM₂,₅ and PM₁₀ were directly derived.

en: LINDA Dataset Weissfluhjoch

en: The LINDA file contains information on temperature (in °C) dependent frozen fractions, number of Ice Nuleating Particles (INP, per standard liter) and differential INP concentrations (per standard liter and Kelvin).

en: APS Dataset Weissfluhjoch

en: The APS file contains aerosol data (total number concentration, median, mean, geometric mean, mode and geometric standard deviation of the size distribution) for aerodynamic diameters between 0.5 μm and ~20 μm as well as instrument characteristics, in a temporal resolution of 20 seconds, with time in UTC, measured at Weissfluhjoch.

en: OPC-GT526S Dataset Weissfluhjoch

en: Particle counts were recorded in six size channels (0.3, 0.5, 0.8, 1.5, 2.5 and 5 μm) in a resolution of 20 seconds (time in UTC) by a particle counter (GT-526S, Met One Instruments, Inc.).

en:
Aerosol properties were measured between February 8 and March 31 2019 at the measurement site Weissfluhjoch (LON: 9.806475, LAT: 46.832964). Optical and aerodynamic particle counters, as well as a scanning mobility particle size spectrometer and an ice nuclei counter were deployed to report particle concentrations and size distributions in fine (10-1000 nm) and coarse mode (> 1000 nm), cloud condensation nuclei concentrations (CCNCs), and ice nuclei particle concentrations (ICNCs). The ambient particles were transported via a heated inlet to be distributed to the particle detecting devices inside the setup room.

Optical Particle Counter (OPC): Light scattering of a diode laser beam caused by travelling particles is used in the both, the OPC-N3 (0.41 - 38.5 μm) and GT-526S (0.3 – 5 μm), to determine their size and number concentration. For the OPC-N3, particle size spectra and concentration data are used afterwards to calculate PM₁, PM₂,₅ and PM₁₀ (assumptions: particle density: 1.65 g cmˉ³, refractive index: 1.5+i0).

Aerodynamic Particle Sizer (APS): The APS (3321, TSI Inc.) measured the particle size distribution for aerodynamic diameters between 0.5 μm and ~20 μm by the particle’s time-of-flight and light-scattering intensity (assumptions: particle density 1 g cmˉ³).

Scanning Mobility Particle Size Spectrometer (SMPS): Particle number concentrations in a size range between 12 and 460 nm (electrical mobility diameter) were measured at Davos Wolfgang, using a Scanning Mobility Particle Sizer Spectrometer (SMPS 3938, TSI Inc.). The classifier (3082, TSI Inc.) was equipped with a neutralizer (3088, TSI Inc.) and a differential mobility analyzer working with negative polarity (3081, TSI Inc.). The size selected particles were counted by a water-based condensation particle counter (3787 TSI Inc.). The TSI AIM software was used to provide particle size distributions by applying multiple charge and diffusion loss corrections (assumptions: particle density 1 g cmˉ³).

Coriolis μ and LINDA: A microbial air sampler (Coriolis μ, bertin Instruments) was used to collect airborne particles for investigating their ice nucleating ability with a droplet freezing device. Particles larger than 0.5 μm were drawn with an air flow rate of up to 300 l min‾¹ into the cone and centrifuged into the wall of the cone due to the forming vortex. The liquid sample was transferred into the LED based Ice Nucleation Detection Apparatus (LINDA, University of Basel) to study heterogeneous ice formation (immersion freezing mode) of ambient airborne particles.

aerosol

display_name: aerosol

ice-nucleation

display_name: ice-nucleation

inp

display_name: inp

linda

display_name: linda

particles

display_name: particles

raclets

display_name: raclets

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Aerosol Data Weissfluhjoch


maintainer: Frank Techel

en: forecast-models spatial-modelling avalanche-release-probability avalanche-forecast machine-learning

en: Natural avalanches 2023/2024

en: Natural avalanche observation (dry avalanches). 2023/2024 forecasting season.

format: XLS

en: Avalanche forecast

en: Data contains forecasts relating to dry-snow avalanche conditions only. Forecast issued at 17.00 local time. Contains variables for the warning region (sector_id), publication date (date), danger level - sub-level combination expressed using numeric values (integer value of danger level -0.33 for sub-level minus, -0 for sub-level neutral, +0.33 for sub-level plus, altitude as indicated in the bulletin, and whether aspect (North = 0, Northeast = 45, ...) was indicated in the bulletin (no: 0, yes: 1).

en: Randomly sampled subset of grid points from 1 km DEM

en: Contains the randomly sampled subset of grid points from 1 km DEM. Three variables: coordinates (x, y) and elevation (elev).

en: Natural avalanches 2022/2023

en: Natural avalanche observation (dry avalanches). 2022-2023 forecasting season.

en: Snowline estimates 2023/2024

en: Daily snowline estimates provided by observers for North (aspect = 0) and South (aspect = 180) slopes for the 2023/2024 season. For aspects in between North and South, values are interpolated. Contains observation date (date), coordinates (Swiss coordinates x, y), snowline elevation (snowline), and aspect.

en: Human-triggered avalanches 2023/2024

en: The file contains the reported human-triggered avalanches. The variables are as follows: id, release date (date), name, Swiss coordinates (x,y), elevation (ele), remark, reported avalanche size expressed using avalanche activity index (sizeAAI), aspect, event type (type), event (yes = 1, no = 0)

en: Snowline estimates 2022/2023

en: Daily snowline estimates provided by observers for North (aspect = 0) and South (aspect = 180) slopes for the 2022/2023 season. For aspects in between North and South, values are interpolated. Contains observation date (date), coordinates (Swiss coordinates x, y), snowline elevation (snowline), and aspect.

en: GPS data and human-triggered avalanches

en: Contains (1) the subset of points extracted from GPS tracks recorded during backcountry touring and uploaded to the website skitourenguru.ch and (2) the corresponding subset of human-triggered avalanches. Data (1) was provided by Skitourenguru GmbH and data (2) was collected by SLF. - Variables contained are date, Swiss coordinates (x, y), aspect (N = 0, NE = 45, ...), elevation (ele), and event (event = 1, non-event = 0).

en: Human-triggered avalanches 2022/2023

en: Model predictions (interpolated)

en: The zip file contains csv-files the interpolated model predictions for three models, in forecast and nowcast-mode, for the three different data sets, as described in the publication.

en: Model predictions (raw data)

en: Model predictions (raw data) for three models, in nowcast and forecast mode. Not all models are available for both seasons. - These data are the basis for the interpolated predictions, which can be found in the other zip-folder

en:
This data set was used in the analysis by Techel et al. *Forecasting avalanche danger: human-made forecasts vs. fully automated model-driven predictions*, submitted to *Natural Hazards Earth System Sciences* on 20 Aug 2024.
The repository contains data from two avalanche forecasting seasons (2022/2023, 2023/2024) in Switzerland.
**Interpolated predictions**
- The .zip file contains the interpolated predictions for the three models in nowcast- and forecast- mode. This data is needed to reproduce the figures and tables in the submitted preprint.
The other data are the **raw data** underlying the interpolations:
- Avalanche forecast by WSL Institute for Snow and Avalanche Research SLF, published at 17.00 local time, valid for the following 24 hours and relating to dry snow avalanche conditions.
- Model predictions in *nowcast*- and *forecast*-mode for three models (*danger level*, *instability*, *natural avalanche*), valid for 12.00 local time
- Subset of points extracted from GPS tracks (courtesy of Skitourenguru GmbH)
- Avalanche observations - natural avalanches and human-triggered avalanches
- Estimates of the snowline
- Randomly chosen subset of grid points used for generating reference distributions
For details regarding the data sets refer to the publication.

avalanche-forecast

display_name: avalanche-forecast

avalanche-release-probability

display_name: avalanche-release-probability

forecast-models

display_name: forecast-models

machine-learning

display_name: machine-learning

spatial-modelling

display_name: spatial-modelling

en: Evaluating the predictive performance of human avalanche forecasts and model predictions in Switzerland


swiss-fluxnet-site-lageren

title_for_slug: swiss-fluxnet-site-lageren

en: meteorological-measurements swiss-forest-lab flux swiss-fluxnet greenhouse-gas forest eddy-covariance

en: Data access

media_type: text/html

en: The flux and meteo data of the Swiss FluxNet site Lägeren are openly available from the European Fluxes Database Cluster.

format: HTML

en: Site description

en:
The Swiss FluxNet Site Lägeren is a managed mixed deciduous mountain forest located on the steep Lägeren mountain (NW of Zurich, Swiss Plateau). The forest is highly diverse, dominated by beech, but also including ash, maple, spruce and fir trees. Eddy covariance flux measurements were started in April 2004. The site was part of the international CarboEurope IP network and the National Air Pollution Monitoring Network (NABEL). In addition to Swiss FluxNet, the site is part of the Long-term Forest Ecosystem Research (LWF) of WSL and the biological drought and growth indicator network (TreeNet) of WSL.

Measurements

- Ecosystem flux measurements of CO2, H2O vapour are performed with the eddy-covariance method. This method is based on measurements of trace gas mixing ratios, using infrared gas analyzers (for CO2, H2O vapor), combined with wind speed and wind direction measurements, using 3D sonic anemometers. To resolve the short-term turbulent fluctuations in the atmosphere, very fast measurements are needed: we measure at 10-20 Hz, i.e., 10-20 times per second. To assess the energy budget of each ecosystem, also radiation sensors and soil climate profiles are installed at the site.
- Sub-canopy eddy fluxes (CO2, H2O), soil respiration campaigns
- Continuous CO2 profile measurements.
- Auxiliary micrometeorology and soil climate measurements.

Data availability

All data are available from the European Fluxes Database Cluster, but are also part of Fluxnet2015 dataset.

Data policy

ICOS data license:
[https://www.icos-cp.eu/data-services/about-data-portal/data-license](https://www.icos-cp.eu/data-services/about-data-portal/data-license)

Detailed site info:
[https://www.swissfluxnet.ethz.ch/index.php/sites/ch-lae-laegeren/site-info-ch-lae//](https://www.swissfluxnet.ethz.ch/index.php/sites/ch-lae-laegeren/site-info-ch-lae/)

eddy-covariance

display_name: eddy-covariance

flux

display_name: flux

forest

display_name: forest

greenhouse-gas

display_name: greenhouse-gas

meteorological-measurements

display_name: meteorological-measurements

swiss-fluxnet

display_name: swiss-fluxnet

swiss-forest-lab

display_name: swiss-forest-lab

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Swiss FluxNet Site Lägeren


en: reef-fish biodiversity traits ecology dispersal

en: Tropical reef fish trait data

en:
Species trait (i.e. adult body size, home range mobility behaviour, circadian activity and schooling) data gathered from the General Approach to Species Abundance Relationships (GASPAR) database (Kulbicki et al. 2013, Parravicini et al. 2013).

Kulbicki, M. et al. 2013. Global biogeography of reef shes: a hier- archical quantitative delineation of regions. – PLoS One 8: e81847.

Parravicini, V. et al. 2013. Global patterns and predictors of tropi- cal reef sh species richness. – Ecography 36: 1254–1262.

To complement the trait data with Pelagic Larval Duration information refer to the following publication:

Luiz, Osmar J., et al. "Adult and larval traits as determinants of geographic range size among tropical reef fishes." Proceedings of the National Academy of Sciences 110.41 (2013): 16498-16502.

In Donati et al. "A process-based model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography in August 2019, we used the PLD gathered from Luiz et al. 2013 as described in the methods - section "Species trait data".

en: Global coast files from https://www.ngdc.noaa.gov/mgg/shorelines/gshhs.html used in the Figures

en: Functions used in R scripts in: Donati et al. 2019 "A process-based-model supports an association between  # dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019

en: Functions for Figures illustrated in Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019.

en: Donati et al. main script

en:
Main script used in : Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages"
accepted in Ecography, August 2019

en: Main text figures

en: R Script used for figures in main text in: Donati et al. 2019: "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019.

en: Simulated rates of speciation and extinction under a range of dispersal parameters. Net diversification rates are calculated from the difference between speciation and extinction rates. This data allows the creation of Figure A4 in Supporting information, Appendix 1.

en: Coral reef grid cells (shape, dbf, etc. files)

en:
Grid cells of 5 × 5°, corresponding to circa 555 × 555 km at the Equator (see Parravicini et al. 2013, Leprieur et al. 2016)

Parravicini, V. et al. 2013. Global patterns and predictors of tropi- cal reef sh species richness. – Ecography 36: 1254–1262.

Leprieur, F. et al. 2016. Plate tectonics drive tropical reef biodiver- sity dynamics. – Nat. Commun. 7: 11461.

en: Input for the Global distribution maps for proportions of species richness for (a) simulated dispersal parameter value (b) observed dispersal-related traits

en: Geographic distribution data (species richness and proportions of high/low dispersal-related traits) on predominantly low dispersing and high dispersing species expected based on the simulations, and those where low- and high- dispersal related traits values are observed for the five investigated traits.

en: Global simulated distribution of species under a range of dispersal parameter values

en:
Global distribution of simulated species richness under a range of dispersal parameter values d
d ∈ [1.75°: 5.45°].

en: Supplementary material Appendix 1 Figures illustrated in Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages". accepted in Ecography, August 2019

en: Input for spatial congruence test overlap between proportions of low and high dispersal and observed low- and high- dispersal-related traits in assemblages (30-50% threshold). see Table 2.

en: Global species distribution of tropical reef fish species

en: Each species corresponds to a "Gaspar_code" gathered from the General Approach to Species Abundance Relationships (GASPAR) database (Kulbicki et al. 2013, Parravicini et al. 2013) and is linked to a specific Fishned ID corresponding to a specific Latitude and Longitude.

en: Dispersal parameter value d per simulation starting with a minimum dispersal value, where each species is able to colonise each adjacent cell, and ending with the value of d for which all the extant habitats, including the most remote Pacific islands, have been colonised (d ∈ [1.75°: 5.45°]).

en:
This dataset contains all data and R codes (R Development Core Team, https://www.R-project.org) used in the following publication: Donati GFA, Parravicini V, Leprieur F, Hagen O, Gaboriau T, Heine C, Kulbicki M, Rolland J, Salamin N, Albouy C, Pellissier L. "A process-based model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted by Ecography in August 2019. When using this data and R scripts the above publication should be cited.

The interaction of habitat dynamics with species dispersal abilities could generate gradients
in species diversity and prevalence of life-history and ecological traits, when the latter are associated with dispersal potential. In this dataset, we use a spatial mechanistic model of speciation, extinction and dispersal, constrained by a dispersal parameter. This model allows to simulate the interplay between reef habitat dynamics over the past 140 million years and dispersal, shaping lineage diversification history and global assemblage composition of over 6000 tropical reef fish species. Global trait distribution data of tropical reef fish are used to evaluate the congruence between simulations and observations.

biodiversity

display_name: biodiversity

dispersal

display_name: dispersal

ecology

display_name: ecology

reef-fish

display_name: reef-fish

traits

display_name: traits

en: Simulated and observed prevalence of dispersal-related traits in tropical reef fish assemblages worldwide


en: irradiance energy snow photovoltaic reflection albedo mountain

en: PV Data

en: Windows users use the 7-zip app to extract the zip-file.

en:
 Overview
The SUNWELL Modelling Environment is a combination of data and code that models electricity production from satellite-derived irradiance data and other spatial data sets for all of Switzerland. This ensemble accompanies the publication "The bright side of PV production in snow-covered mountains", published in the Proceedings of the National Academy of Science and reproduces all results and figures of. Code and resources are in their original form (with documentation). A new version with a more generalized application to PV modelling and with more flexibility in terms of input and output formats will be released in the coming months.

 Format
All code is written and has to be executed in Matlab. The input and output data sets are also in the Matlab-specific .mat format. Whenever publicly available, the original data is provided as geotif, .xlsx or other common format.
This is the case for:

- Digital Elevation Model (InputsFromMatlab/MSG/OriginalData/ASTERDEM),
- Landsurface cover type (InputsFromMatlab/MSG/OriginalData/CORINE),
- Population Density (InputsFromMatlab/MSG/OriginalData/popdensRaster,
- Electricity production from three of our validation sites (/Validation/WSL),
- Measured irradiance for two validation sites (/Validation/ASRB)
The ‘Metadata’ documents in the respective folders provide further information about the data sources and processing. Figures are produced either in .pdf or .png format.

 Structure
The central level of the SUNWELL environment holds the 5 Mains, which run the different modelling aspects of the paper; each code is documented separately. Additional code is located in the ‘DataProcessing’ and the ‘functions’ folder. Functions are called in the different Mains.

‘InputsFromMatlab’ contains the radiation and albedo input data sets in separate subfolders (SIS/SISDIR/ALB). The original data is not publicly available, but can be requested for research purposes free of charge. We provide a processed subset of the data set that was used to run the SUNWELL simulations. The MSG subfolder contains additional spatial input data sets.

‘Outputs’ contains the output files from the different mains (matching names, Main_CHallpixels.m  Prod_CHallpixels)

‘Publication_figures’ contains all individual figures from the PNAS publication, as well as the generating code (/code_plot) and the power point figures (/ppts) that provide the combined final figures.

‘Validation’ contains the data sets used in the model validation:

- Electricity production from three of our validation sites (/WSL),
- Measured irradiance for two validation sites (/ASRB)

Electricity production from a validation site at Lac des Toules in Wallis (/LDT), this data set was provided under an NDA and cannot be made publicly available.

Paper Citation:
 > _Annelen Kahl; Jérôme Dujardin; Michael Lehning (2018). Dataset on PV Production in Snow Covered Mountains. PNAS - Proceedings of the National Academy of Sciences. (in press)_

albedo

display_name: albedo

energy

display_name: energy

irradiance

display_name: irradiance

mountain

display_name: mountain

photovoltaic

display_name: photovoltaic

reflection

display_name: reflection

snow

display_name: snow

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


data-set-on-snow-instability

title_for_slug: data-set-on-snow-instability

en: snow-stability-evaluation failure-initiation crack-propagation slab-tensile-support weak-layer propgatoin-saw-test snow-avalanche rutschblock avalanche-forcasting slab

en: Read-me file on snow instability data

en: data set on snow instability

en:
These data on snow instability include three data subsets that were analyzed and the results published by Reuter and Schweizer (2018) who suggest a novel framework on how to describe snow instability by failure initiation, crack propagation and slab tensile support.

Please refer to the Read-me file for further details on the data.

These data are the basis of the following publication:
Reuter, B. and Schweizer, J., 2018. Describing snow instability by failure initiation, crack propagation and slab tensile support. Geophys. Res. Lett., 45, doi: 10.1029/2018GL078069.

avalanche-forcasting

display_name: avalanche-forcasting

crack-propagation

display_name: crack-propagation

failure-initiation

display_name: failure-initiation

propgatoin-saw-test

display_name: propgatoin-saw-test

rutschblock

display_name: rutschblock

slab

display_name: slab

slab-tensile-support

display_name: slab-tensile-support

snow-avalanche

display_name: snow-avalanche

snow-stability-evaluation

display_name: snow-stability-evaluation

weak-layer

display_name: weak-layer

en: Data set on snow instability


en: uav dsm drone-data photogrammetry wingtra

en: Data Access

en:
- DSM 10cm resolution
- Orthomosaic 3cm resolution
- Agisoft Metashape Processing Report
- original RGB images

All generated products are also available as a cloud optimized geotiff.

en: We conducted four drone flights in Davos Wolfgang Arelen, in 2020/21 and 2022 to obtain data for the generation of DSMs and orthomosaics at a high resolution. The data was processed with the Agisoft Metashape Professional Software.

drone-data

display_name: drone-data

dsm

display_name: dsm

photogrammetry

display_name: photogrammetry

uav

display_name: uav

wingtra

display_name: wingtra

en: Photogrammetric Drone Data Wolfgang Arelen


maintainer: Armin Sigmund

en: meteorological-measurements drifting-snow antarctica atmospheric-turbulence blowing-snow

en: (k) Wind speed profiles

en: Average vertical profiles of horizontal wind speed based on the ultrasonic anemometer data.

en: (g) Sonic data 4

en: Ultrasonic anemometer data in the period from 30 October to 6 November 2000.

en: (j) Spike percentage

en: Percentage of spikes removed from the ultrasonic anemometer data per 5-min interval.

en: (l) AWS data

en: Automatic weather station data with 10-min intervals.

en: (d) Sonic data 1

en: Ultrasonic anemometer data in the period from 30 September to 11 October 2000.

en: (h) Sonic data 5

en: Ultrasonic anemometer data in the period from 6 to 13 November 2000.

en: (f) Sonic data 3

en: Ultrasonic anemometer data in the period from 21 to 30 October 2000.

en: (c) SPC average profiles

en: Average vertical profiles of the horizontal snow mass flux, particle number size distribution, and mean and standard deviation of the particle diameter.

en: (a) Metadata

en: General and specific metadata for all files.

en: (i) Sonic data 6

en: Ultrasonic anemometer data in the period from 13 to 18 November 2000.

en: (b) SPC time series

en: Data from the snow particle counters with 1-s intervals.

en: (e) Sonic data 2

en: Ultrasonic anemometer data in the period from 11 to 21 October 2000.

en: (m) Weather observations

en: Weather elements and phenomena observed by the Japanese Meteorological Agency.

en:
This data was collected at Mizuho Station (44.315°E, 70.71°S, 2230 m a.s.l.), East Antarctica, from **30 September to 22 November 2000** during the 41st Japanese Antarctic research expedition. Vertical profiles of the horizontal mass flux and particle number size distribution of drifting and blowing snow were measured in the lowest 10 m of the atmosphere using four **snow particle counters** (SPCs). Three 3-dimensional **ultrasonic anemometers** were deployed in the lowest 25 m of the atmosphere to record the wind velocity components and sonic temperature at a high frequency of 100 Hz. Additionally, an **automatic weather station** provided air temperature, relative humidity, air pressure, shortwave and longwave downward and upward radiation fluxes, surface temperature, snow temperatures at depths of 0.1 and 0.4 m below the surface, wind speed, and wind direction. The data is complemented by **weather observations** performed twice to eleven times per day by the Japanese Meteorological Agency.
Most of the time, the lowest SPC was situated at a height of 0.05 or 0.1 m above the snow surface. During certain periods called profile runs, the height of the lowest SPC was systematically varied between 0.02 and 0.2 m to increase the vertical resolution of the measured profiles. The other SPC's were installed at fixed heights of 1.1, 3.1, and 9.6 m. During each profile run, the lowest SPC was kept at a specific height for approximately 10 min before changing the height. If the wind speed remained approximately constant throughout a profile run, the data was used to compute the average snow-transport profile in that period. In total, 24 of such average profiles were obtained. A part of these SPC measurements are discussed in Nishimura and Nemoto (2005).
The ultrasonic anemometers were placed at heights of 0.3, 1, and 25 m. However, the height of the lowest ultrasonic anemometer was changed several times in the measurement period and ranged from 0.05 to 0.32 m. On top of that, 19 short periods (each lasting 15 to 160 min) were used to systematically vary the height of the lowest ultrasonic anemometer and thus increase the vertical resolution of the measured wind speed profile. Occasionally, drifting and blowing snow particles perturbed the ultrasonic measurement signal and electrically-charged particles caused an electric charge of the anemometers, leading to artifacts such as spikes and dropouts in the measured time series. These artifacts were largely removed and replaced by NaN, using the statistical spike removal algorithm of Mauder et al. (2013). However, the artifact removal was sometimes incomplete for the lowest anemometer because of very intense snow transport close to the surface. While temporal averages are barely affected by the artifacts, the high-frequency data of the lowest anemometer should be used carefully when computing turbulent fluxes using the eddy-covariance method. Further important explanations are provided in the file Readme.pdf in data resource '(a) Metadata'.
References
- Mauder, M., Cuntz, M., Drüe, C., Graf, A., Rebmann, C., Schmid, H.P., Schmidt, M., Steinbrecher, R. (2013). A strategy for quality and uncertainty assessment of long-term eddy-covariance measurements. Agric For Meteorol 169:122–135. https://doi.org/10.1016/j.agrformet.2012.09.006
- Nishimura, K., Nemoto M. (2005). Blowing snow at Mizuho station, Antarctica. Phil. Trans. R. Soc. A. 363: 1647–1662. https://doi.org/10.1098/rsta.2005.1599

antarctica

display_name: antarctica

atmospheric-turbulence

display_name: atmospheric-turbulence

blowing-snow

display_name: blowing-snow

drifting-snow

display_name: drifting-snow

meteorological-measurements

display_name: meteorological-measurements

en: Profile measurements of snow transport and micrometeorology at Mizuho Station in Antarctica


weather-station-klosters

maintainer: Maxime Hervo

title_for_slug: weather-station-klosters

en: weather precipitation temperature raclets wind klosters

en: Weather Station Klosters

en: All in one weather station measuring temperature (°C), humidity (%), wind (m s‾ ¹) and precipitation type. The time format is: number of days from January 0, 0000, UTC.

en: A weather station (Lufft WS600) measured meteorological parameters at Klosters (LON: 9.880413, LAT: 46.869019). Detailed information on the specifications can be found [here](https://www.lufft.com/products/compact-weather-sensors-293/ws600-umb-smart-weather-sensor-1832/productAction/outputAsPdf/).

klosters

display_name: klosters

precipitation

display_name: precipitation

raclets

display_name: raclets

temperature

display_name: temperature

weather

display_name: weather

wind

display_name: wind

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.


greenland-climate-network-gc-net-data

title_for_slug: greenland-climate-network-gc-net-data

en: greenland climate aws automatic-weather-station net-radiation air-temperature

en: GC Net Config for Stations

media_type: application/json

en: Stations Config from the static bucket

format: JSON

en: Archived GC-Net Data (deprecated)

en:
The GC-Net is kindly continued by the Geological Survey of Denmark and Greenland (GEUS).

Starting October 3, 2022, the access to the latest versions of the "ready to use" L1 data has been migrated to GEUS, (doi:10.22008/FK2/VVXGUT). Future versions will be available from GEUS, while the initial versions of L0 and L1 data have been archived.

en: 22-Petermann ELA

en: GC Net Chart Parameters

en: Stations parameters from static bucket

en: Access the latest L1 data

en:
The GC-Net is kindly continued by the Geological Survey of Denmark and Greenland (GEUS).

Starting October 3, 2022, the access to the latest versions of the "ready to use" L1 data has been migrated to GEUS, (doi:10.22008/FK2/VVXGUT). Future versions will be available from GEUS, while the initial version of L1 data has been archived.

en:
In Memory of Dr. Konrad (Koni) Steffen

Update October 2022: The GC-Net is kindly continued by the Geological Survey of Denmark and Greenland (GEUS).
Starting October 3, 2022, the access to the latest versions of the "ready to use" L1 data has been migrated to GEUS. Future data versions will be available at: [https://doi.org/10.22008/FK2/VVXGUT](https://doi.org/10.22008/FK2/VVXGUT)
 Background
Starting with a single station in 1991, the Greenland Climate Network (commonly known as GC-Net) is a set of Automatic Weather Stations (AWS) set up and managed by the late Prof. Dr. Konrad (Koni) Steffen, and spanning the Greenland Ice Sheet (GrIS). This first station was "Swiss Camp" or the "ETH-CU" camp (GC-Net station 01) which was used as a field science and education site by Koni for years. The GC-Net was expanded with multiple NASA, NOAA, and NSF grants throughout the years, and then supported by WSL in the later years. These data (see "C-file" below) were previously hosted by the Cooperative Institute for Research in Environmental Sciences (CIRES) in Boulder, Colorado.

 Overview
Provided in this dataset are the 16 longest running stations in the network, which are spread over a significant area of the GrIS and the majority of the unique climatic zones. From the South Dome high point in the South, to the Western Jakobshavn ablation region in the west, to the Petermann glacier in the North across east of the Northeast Greenland Ice Stream to the east, GC-Net is the longest running climatological record of Greenland.

 The standard GC-Net station consists of:
* Air temperature measurements at 2 heights above the surface
* Temperature and humidity measurements at 2 heights above the surface
* Wind speed and direction measured at 2 heights above the surface
* Sonic distance sounder measurements for 2 snow height and distance of instruments to surface
* Incoming shortwave radiation measurement
* Reflected shortwave radiation measurement
* Net broadband radiation (long- and short-wave) measurement
* Air pressure measurement
Data have often been repatriated in near-real time using one of either the GOES geostationary satellite or the ARGOS polar orbiting satellite transmission system. The stations were visited typically every 1-2 years for maintenance and service, and to download full uncorrupted data directly from the dataloggers. GC-Net stations were visited by Twin Otter equipped with snow skids to land directly on the open-ice at the AWS locations, or by helicopter near the west coast. The AWSs operate on solar and battery power and occasionally lost power during the dark and cold winter months, particularly when the batteries were aging.

 Dataset
This dataset consists of 2 main data levels; Level 0 and Level 1.
Level 0 is the raw data from the dataloggers, historical processing codes, satellite transmissions, and Koni’s personal data archive. Level 0 data (.zip) directories contain subdirectories:
* “C file” - contains the historical processed datafile for each station.
* “Campbell logger files” - contains the raw csv datafiles from the stations’ Campbell Scientific dataloggers since the CR1000 era (~2007-2008 for most stations).
* “Photos” - contains photographs of the station when available marked by year.
Level 1 is the appended, calibrated, cleaned, and quality flagged data. The full processing scheme is open-source and publicly available on the following GitHub repository (please also check GitHub for the latest L1 data):
[GC-Net L1 data on GitHub](https://github.com/GEUS-Glaciology-and-Climate/GC-Net-level-1-data-processing "GC-Net-level-1-data-processing")
Level 1 data is provided in the newly described csv-compatible [NEAD format](https://www.envidat.ch/#/metadata/nead "NEAD format").

 Additional Details
Dataset description publication will be forthcoming.
The Geological Survey of Denmark and Greenland (GEUS) has been imperative in the reprocessing and continuity mission of GC-Net. Multiple GC-Net stations have been replaced with updated and upgraded AWS hardware at the same coordinates by GEUS. This effort will ensure continuity of the GC-Net dataset into the future.

air-temperature

display_name: air-temperature

automatic-weather-station

display_name: automatic-weather-station

aws

display_name: aws

climate

display_name: climate

greenland

display_name: greenland

net-radiation

display_name: net-radiation

en: Greenland Climate Network (GC-Net) Data


en: co2 picea-abies forest nitrogen soil face

en: Collection points

en: Collection points under the trees

en: Collection of soil solution

en: Soil solution collected by suction cups

en: Soil C and N

en: Analyses of C, N and their stable isotopes in the soil, and soil pH

en: Gross N mineralisation and nitrification

en: Gross rates of N mineralisation and nitrification (15N dilution)

en: Resin bags

en: Ammonium, nitrate and their 15N in resin bags

en: Water analyses

en: Analyses of water, especially soil solution

en: Data obtained in the free-air CO2 enrichment (FACE) experiment at Hofstetten, NW Switzerland, between 2009 and 2016. This dataset contains analyses of the soil solution throughout the experiment, especially for nitrate, as well as different analyses done at the end of the experiment: ammonium and nitrate captured by ion-exchange resin bags and extracted from soil cores, gross N mineralisation and nitrification measured by isotope dilution.

face

display_name: face

forest

display_name: forest

nitrogen

display_name: nitrogen

picea-abies

display_name: picea-abies

soil

display_name: soil

en: Nitrogen availability under trees exposed to CO2 enrichment (FACE)


maintainer: Dominique Weber

en: remote-sensing use-intensity grassland land-use management landsat sentinel-2 mowing

en: Preview number of grassland management events 2020

media_type: image/png

en: Spatial distribution of the number of management events for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the distribution of management frequency (Weber et al., 2023; IN REVIEW)

format: PNG

en: Grassland-use intensity map 2020

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2020. See readme file for more details.

en: Readme

en: Metadata and description of the maps and webcam-based reference data.

en: Preview time of 1st grassland management event 2020

en: Spatial distribution of the timing (day of year; DOY) of the first management event for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the timing of the first event of the year (Weber et al., 2023; IN REVIEW)

en: Grassland-use intensity map 2018

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2018. See readme file for more details.

en: Webcam-based reference data

en: Webcam-based reference data from 2020 and 2021 (see readme).

en: Grassland-use intensity map 2021

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2021. See readme file for more details.

en: Grassland-use intensity map 2019

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2019. See readme file for more details.

en:
A rule-based algorithm [(Schwieder et al., 2022)](https://doi.org/10.1016/j.rse.2021.112795) was used to produce annual maps for 2018–2021 of grassland-management events, i.e. mowing and/or grazing, for Switzerland using Sentinel-2 and Landsat 8 satellite time series. All satellite images were processed with the [FORCE](https://force-eo.readthedocs.io) framework.

The resulting maps provide information on the number and timing of grassland-management events at a spatial resolution of 10 m × 10 m for the whole of Switzerland. For the final maps, permanent grasslands were masked using a variety of land-use layers, according to [Huber et al. (2022)](https://doi.org/10.1002/rse2.298) but replacing the crop mask with the agricultural-use data from the cantons.

We assessed the detection of management events based on independent reference data, which we acquired from daily time series of publicly available webcams that are widely distributed across Switzerland. We further tested the ecological relevance of the generated intensity measures in relation to nationwide biodiversity data (see [Weber et al., 2023](https://doi.org/10.1002/rse2.372)).

The webcam-based reference data used for verification was subsequently added on 14.02.2024.

grassland

display_name: grassland

land-use

display_name: land-use

landsat

display_name: landsat

management

display_name: management

mowing

display_name: mowing

remote-sensing

display_name: remote-sensing

use-intensity

display_name: use-intensity

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Grassland-use intensity maps for Switzerland


lwf-tea-bag-sites

maintainer: Marcus Schaub

title_for_slug: lwf-tea-bag-sites

en: verification roiboos tea-bag green-tea decomposition litter carbon forest modeling

en: Site Information

en: Descriptive information on sites

en:
Decomposition of plant litter is a key process for the transfer of carbon and nutrients in ecosystems. Carbon contained in the decaying biomass is released to the atmosphere as respired CO2, and may contribute to global warming. Litterbag studies have been used to improve our knowledge of the drivers of litter decomposition, but they lack comparability because litter quality is plant species-specific. The use of commercial tea bags as a standard substrate was suggested in order to harmonize studies, where green tea and rooibos represent more labile and more recalcitrant C compounds as surrogates of local litter.
The tea bag approach was implemented on eight sites of the Swiss long-term Forest Ecosystem Research (LWF) network (https://www.wsl.ch/LWF). This allowed us to take advantage from the existing infrastructure and data from a previous litterbag study with local litter. In Beatenberg and Schaenis, additional elevation transects were established (1200-1800 m and 540-1150 m, respectively) to examine particularly the effect of temperature on decomposition. In Pfynwald (https://www.wsl.ch/de/ueber-die-wsl/versuchsanlagen-und-labors/flaechen-im-wald/pfynwald.html) and Salgesch, infrastructure of running projects was used to examine the effect of drought and understory removal, respectively. In Novaggio, tea bags were incubated in summer and winter to study the effect of seasonality particularly precipitation. Tea bags are collected after 3, 12, 24, and 36 months; for the two time-shifted experiments additionally after 6 and 9 months.
The study has two primary objectives. Firstly, it contributes to TeaComposition initiative (http://teacomposition.org/) which aims at investigating long-term litter decomposition and its key drivers at present as well as under different future climate scenarios using a common protocol and standard litter (tea) across nine terrestrial biomes. Secondly, the data are used to further develop decomposition models such as Yasso (http://en.ilmatieteenlaitos.fi/yasso) which is used by several countries, including Switzerland to estimate the annual carbon fluxes in dead wood, litter, and soil for reporting in National Greenhouse Gas Inventories under the United Nations Framework Convention on Climate Change and the Kyoto Protocol.

carbon

display_name: carbon

decomposition

display_name: decomposition

green-tea

display_name: green-tea

litter

display_name: litter

modeling

display_name: modeling

roiboos

display_name: roiboos

tea-bag

display_name: tea-bag

verification

display_name: verification

en: LWF-Tea bag sites


en: snow-failure snow-avalanche snow sintering snow-mechanics acoustic-emissions fiber-bundle-model viscous-deformation

en: fiber-bundle-model-for-snow-failure

en: Data underlying Figures in publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted to "Geophysical Research Letters"

en:
This dataset contains modeled and experimental results for laboratory snow failure experiments and the concurrent acoustic emissions signatures for different loading rates. For modelling the snow failure we used a fiber bundle model that includes sintering and viscous deformation.

The data underlay the figures in the publication "Modelling Snow Failure Behavior and Concurrent Acoustic Emissions Signatures with a Fiber Bundle Model" submitted for publication to "Geophysical Research Letters".

acoustic-emissions

display_name: acoustic-emissions

fiber-bundle-model

display_name: fiber-bundle-model

sintering

display_name: sintering

snow

display_name: snow

snow-avalanche

display_name: snow-avalanche

snow-failure

display_name: snow-failure

snow-mechanics

display_name: snow-mechanics

viscous-deformation

display_name: viscous-deformation

en: Fiber Bundle Model for snow failure and concurrent Acoustic Emissions


en: edna atlantic-region fish-composition chondrichthyes teleo actinopterygii metabarcoding bayofbiscay

en: Data access

en:
Environmental DNA complements scientific trawling in surveys of marine fish biodiversity (Dataset 2019)
In October 2019 we chose 15 sites from the 2019 EVHOE survey for eDNA sampling. The French international EVHOE bottom trawl survey is carried out annually during autumn in the BoB to monitor demersal fish resources. At each site, we sampled seawater using Niskin bottles deployed with a circular rosette. There were nine bottles on the rosette, each of them able to hold ∼5 l of water. At each site, we first cleaned the circular rosette and bottles with freshwater, then lowered the rosette (with bottles open) to 5 m above the sea bottom, and finally closed the bottles remotely from the boat. The 45 l of sampled water was transferred to four disposable and sterilized plastic bags of 11.25 l each to perform the filtration on-board in a laboratory dedicated to the processing of eDNA samples. To speed up the filtration process, we used two identical filtration devices, each composed of an Athena® peristaltic pump (Proactive Environmental Products LLC, Bradenton, Florida, USA; nominal flow of 1.0 l min–1 ), a VigiDNA 0.20 μm filtration capsule (SPYGEN, le Bourget du Lac, France), and disposable sterile tubing. Each filtration device filtered the water contained in two plastic bags (22.5 l), which represent two replicates per sampling site. We followed a rigorous protocol to avoid contamination during fieldwork, using disposable gloves and single-use filtration equipment and plastic bags to process each water sample. At the end of each filtration, we emptied the water inside the capsule that we replaced by 80 ml of CL1 conservation buffer and stored the samples at room temperature following the specifications of the manufacturer (SPYGEN, Le Bourget du Lac, France). We processed the eDNA capsules at SPYGEN, following the protocol proposed by Polanco-Fernández et al., (2020). We performed library preparation and sequencing at Fasteris (Geneva, Switzerland). Specifically, we prepared four libraries using the MetaFast protocol (a ligation-based method) and sequenced them separately. We carried out paired-end sequencing using a MiSeq sequencer (2 × 125 bp, Illumina, San Diego, CA, USA) on two MiSeq Flow Cell Kits (v3; Illumina), following the manufacturer’s instructions. We analysed the sequence reads using the OBITools package (http://metabarcoding.org/obitools; Boyer et al., 2016), following the protocol described by Valentini et al. (2016).
Data content:
	* rawdata/: contains the raw reads for each individual sample. One archive contains the paired-end reads specified by the _R1 or _R2 suffix as well as individually tagged PCR replicates (if available) together with an archive containing all extraction and PCR blank samples of the library. Reads have been demultiplexed using cutadapt but not trimmed, individual demultiplexing tags and primers remain present in the sequences.
	* taxadata/: contains the table with all detected taxonomy for each sample after bioinformatic processing (see Polanco et al. 2020 for details; https://doi.org/10.1002/edn3.140) and associated field metadata.
	* metadata/: contains two metadata files, one related to the data collected in the field for each filter, and the second related to the sequencing process in the lab (including the tag sequence, library name, and marker information for each sample)

actinopterygii

display_name: actinopterygii

atlantic-region

display_name: atlantic-region

bayofbiscay

display_name: bayofbiscay

chondrichthyes

display_name: chondrichthyes

edna

display_name: edna

fish-composition

display_name: fish-composition

metabarcoding

display_name: metabarcoding

teleo

display_name: teleo

en: Environmental DNA Marine France Evhoe 2019


high-resolution-climate-data-for-europe

title_for_slug: high-resolution-climate-data-for-europe

en: maximum-temperature daily-climate europe air-temperature cordex precipitation minimum-temperature eur11

en: CHELSA EUR11 Technical Documentation

en: As the CHELSA project is continuously expanded, certain new parameters, time scales etc. are not included anymore in the original publication (Karger et al. 2017). We are therefore provide this document as a guideline of the current climatic parameters available and will expand it as new parameters or time periods will become available. Please refer to the version history for changes made in the document.

en: Data Access

en:
High-resolution information on climatic conditions is essential to many applications in environmental and ecological sciences. Here we present downscaled climate data for the CORDEX EUR11 domain at a high resolution of 30 arc sec. The temperature algorithm is based on statistical downscaling of atmospheric temperature lapse rates. The precipitation algorithm incorporates orographic predictors including wind fields, valley exposition, and boundary layer height. The resulting data consist of a daily temperature and precipitation timeseries.

The data is distributed under a: Creative Commons: Attribution 4.0 International (CC BY 4.0) license.

air-temperature

display_name: air-temperature

cordex

display_name: cordex

daily-climate

display_name: daily-climate

europe

display_name: europe

maximum-temperature

display_name: maximum-temperature

minimum-temperature

display_name: minimum-temperature

precipitation

display_name: precipitation

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: High resolution climate data for Europe


en: avalanche-observations switzerland extended-column-test rutschblock-test avalanche-danger norway

en: ECT data (Norway, Switzerland)

en: Rutschblock data (Switzerland)

en: avalanche occurrence data (Norway, Sitzerland) - avalanche sizes per day and warning region

en: avalanche occurrence data (Norway, Sitzerland) - largest avalanche size per day and warning region

en:
Observational data used to quantitatively describe the key elements describing avalanche danger: snowpack stability, the frequency distribution of snowpack stability, and avalanche size.
The data set consists of
- Rutschblock test results (Switzerland)
- Extended Column Test results (Switzerland, Norway)
- Avalanche occurrence data (Switzerland, Norway).
The data were extracted from the respective operational databases of the national avalanche warning services in Switzerland (WSL Institute for Snow and Avalanche Research SLF Davos, Switzerland) and Norway (The Norwegian Water Resources and Energy Directorate NVE).
For further information regarding the data, please refer to the publication or contact the author.

avalanche-danger

display_name: avalanche-danger

avalanche-observations

display_name: avalanche-observations

extended-column-test

display_name: extended-column-test

norway

display_name: norway

rutschblock-test

display_name: rutschblock-test

switzerland

display_name: switzerland

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Stability tests, avalanche observations, Switzerland, Norway


maintainer: Lisa Hülsmann

en: forest-reserves fagus-sylvatica forest-inventory mortality-models tree-mortality primeval-forests

en: Ukrainian data

en:
READ ME for

Hülsmann L, Bugmann H, Commarmot B, Meyer P, Zimmermann S, Brang P
Data from: Does one model fit all? Patterns of beech mortality in natural forests of three European regions.
Ecological Applications http://dx.doi.org/10.5061/dryad.h4s6t

Forest inventory data of beech for the development of individual-tree mortality models from strict forests reserves in Switzerland, Germany and Ukraine.

The data package provides the files
CH_reduced: inventory data of the reduced dataset from Switzerland that was used to assess the influence of additional environmental and stand characteristics on beech mortality
CH: inventory data from strict forest reserves in Switzerland
DE: inventory data from strict forest reserves in Germany
UA: inventory data from a primeval beech forest in Ukraine

A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.
Diameter at breast height: dbh (mm)
Annual relative basal area increment: relBAI (), calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area (Bigler and Bugmann 2004)
Status of the tree: y, 0 = alive, 1 = dead
Length of the mortality period: dt (years)

Additional environmental and stand characteristics were derived for the reduced Swiss dataset.
Note the varying seasonal level of the covariates considering the entire year, the growing season from April to September (G) and the winter month January to March (W).
All climatic covariates were calculated for both the ‘growth’ (2) and the ‘mortality’ period (3). The stand covariates were derived for the second inventory of each record (2).

Mean diameter at breast height: dbh.mean.2 (mm)
Interquartile range of diameter at breast height: dbh.IQR.2 (mm)
Median diameter at breast height: dbh.median.2 (mm)
Basal area per hectare: BA.2 (m2 ha-1)
Number of trees per hectare: N.2 (ha-1)
pH-value: pH ()
Available water capacity in the soil: AWC (mm)
Mean annual precipitation sum: P.2, P.3 (mm)
Mean precipitation sum during growing season: PG.2, PG.3 (mm)
Mean annual air temperature: mT.2, mT.3 (°C)
Mean air temperature during growing season: mTG.2, mTG.3 (°C)
Mean air temperature during winter months: mTW.2, mTW.3 (°C)
Mean growing degree-days: GDD.2, GDD.3 ()
Mean number of months during growing season with water deficit: mDEFdurG.2, mDEFdurG.3 ()
Mean annual maximum water deficit: mDEFmax.2, mDEFmax.3 (mm)
Overall maximum of the annual maximum water deficit: maxDEFmax.2, maxDEFmax.3 (mm)
Mean of cumulative water deficit during growing season: mDEFcumG.2, mDEFcumG.3 (mm)
Overall maximum of cumulative water deficitduring growing season: maxDEFcumG.2, maxDEFcumG.3 (mm)
Percentage of years with at least one month water deficit: percDEF.2, percDEF.3 (%)

en: German data

en: Swiss data full

en: Swiss data reduced

en:
The datasets comprise nearly 19’000 trees of European beech (_Fagus sylvatica_ L.) from unmanaged forests in Switzerland, Germany / Lower Saxony and Ukraine. Tree death was modelled as a function of size and growth, i.e., stem diameter (DBH) and relative basal area increment (relBAI). To explain the spatial and temporal variability in mortality patterns, we considered a large set of environmental and stand characteristics.

 Inventory data
The strict forest reserves in Switzerland and Germany had been established in the period of 1961-1975 and 1971-1974, respectively. Every reserve included up to 10 permanent plots ranging from 0.09 to 1.8 ha in size, with slightly irregular re-measurement intervals. Permanent plots with pure or mixed beech stands were selected from the reserves of both networks. Reserves with considerable wind disturbance during the monitored intervals were excluded from the analysis. In addition to data from the Swiss and German reserves, data from a 10 ha plot in the primeval beech forest Uholka in Western Ukraine including three remeasurements were used. The inventory data provide diameter measurements at breast height (dbh) for revisited trees with a diameter of more than 4, 7 and 6 cm for Switzerland, Germany and Ukraine, respectively.

 Mortality predictors
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory. As an explanatory variable, the annual relative basal area increment (relBAI) was calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area. Tree dbh in the second inventory was used in addition to relBAI to model tree status (alive or dead) of the third inventory.

To increase the generality of the mortality models, we selected environmental variables that are known to have a considerable influence on growth and mortality of beech. We emphasized the effects of water availability using a large set of drought characteristics that were calculated based on the local site water balance. We also related beech mortality to soil pH, temperature, precipitation and growing degree-days. Additionally, we considered stand characteristics that reflect the development stage, competition and structure of the forests.

 Further information
For further information, refer to Hülsmann _et al_. (2016) Does one model fit all? patterns of beech mortality in natural forests of three European regions. _Ecological Applications_.

fagus-sylvatica

display_name: fagus-sylvatica

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves

mortality-models

display_name: mortality-models

primeval-forests

display_name: primeval-forests

tree-mortality

display_name: tree-mortality

en: Data from: Does one model fit all? patterns of beech mortality in natural forests of three European regions


en: fem metamorphism x-ray-tomography microstructure time-series snow

en: Simulation parameters and outputs for "A rigorous approach to the specific surface area evolution in snow during temperature gradient metamorphism"

format: ODS

en:
In the associated study [1], two time-lapse temperature gradient metamorphism series of three-dimensional micro-computed tomography images of snow (obtained by [2]) have been used to model the decrease of specific surface area (SSA) over time based on the pore-scale physics. We conducted finite element simulations of one-way coupled heat and mass diffusion in order to estimation the spatial pattern of water vapor deposition and sublimation, which controls the evolution of the SSA over time. We notably studied the influence of the condensation coefficient, a key but poorly constrained physical parameter.
This dataset provides the parameters used for the mesh generation and the finite element simulations. It also includes the ice fraction, specific surface area per unit volume and surface average of mean curvature and vapor field obtained as outputs from the mesh process and the simulations.
[1]: Braun, A., Fourteau, K., and Löwe, H.: A rigorous approach to the specific surface area evolution in snow during temperature gradient metamorphism, EGUsphere [preprint], https://doi.org/10.5194/egusphere-2023-1947, 2023.
[2]: Pinzer, B. R., Schneebeli, M., and Kaempfer, T. U.: Vapor flux and recrystallization during dry snow metamorphism under a steady temperature gradient as observed by time-lapse micro-tomography, The Cryosphere, 6, 1141–1155, https://doi.org/10.5194/tc-6-1141-2012, 2012.

fem

display_name: fem

metamorphism

display_name: metamorphism

microstructure

display_name: microstructure

snow

display_name: snow

time-series

display_name: time-series

x-ray-tomography

display_name: x-ray-tomography

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Simulation parameters and outputs for a rigorous approach to the specific surface area evolution in snow during temperature gradient metamorphism


en: switzerland climate-change alpine3d-simulations snow graubunden

en: Configuration file

en: Simulation data

en: Reference data as well as the 2050 and 2099 scenarios for ARPEGE and ETHZ other RCMs available on demand)

en:
This is the simulation dataset from _"Response of snow cover and runoff to climate change in high Alpine catchments of Eastern Switzerland"_, M. Bavay, T. Grünewald, M. Lehning, Advances in Water Resources 55, 4-16, 2013

A model study on the impact of climate change on snow cover and runoff has been conducted for the Swiss Canton of Graubünden. The model Alpine3D has been forced with the data from 35 Automatic Weather Stations in order to investigate snow and runoff dynamics for the current climate. The data set has then been modified to reflect climate change as predicted for the 2021-2050 and 2070-2095 periods from an ensemble of regional climate models.

The predicted changes in snow cover will be moderate for 2021-2050 and become drastic in the second half of the century. Towards the end of the century the snow cover changes will roughly be equivalent to an elevation shift of 800 m. Seasonal snow water equivalents will decrease by one to two thirds and snow seasons will be shortened by five to nine weeks in 2095.

Small, higher elevation catchments will show more winter runoff, earlier spring melt peaks and reduced summer runoff. Where glacierized areas exist, the transitional increase in glacier melt will initially offset losses from snow melt. Larger catchments, which reach lower elevations will show much smaller changes since they are already dominated by summer precipitation.

climate-change

display_name: climate-change

graubunden

display_name: graubunden

en: Alpine3D simulations of future climate scenarios for Graubunden