en: turbulent-sensible-heat-fluxes dischmex eddy-covariance-measurements snow-patch patchy-snow-covers

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.2 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 1.7 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 0.7 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (DA-600, Kaijo-Denki) in 0.3 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 2.6 m.

en: Gletschboden setup

en: Background map based on data © 2014/2016 swisstopo (JD100042)

mimetype: image/png

en: Eddy-covariance measurement with an ultrasonic anemometer (CSAT3, Campbell Scientific Inc.) in 3.2 m on a daily basis.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.3 m.

en: Eddy-covariance measurement with an ultrasonic anemometer (R.M. Young Company) in 3.5 m.

en: Output explanation

en:
This dataset contains eddy-covariance measurements in the ablation period of 2014-2016. Measurements were taken from two turbulence towers over a long-lasting snow patch, which are 5 m apart from each other (2014 and 2015). The turbulence towers were equipped with two YOUNG ultrasonic anemometers mounted 0.7 m (in 2014) and 3.3 m (in 2015) above snow-free ground, two ultrasonic anemometers (CSAT3, Campbell Scientific, Inc.) mounted at 2.6 m (in 2014) and 2.2 m (in 2015) above snow-free ground and one anemometer (DA-600, Kaijo Denki) mounted at 0.3 m above snow surface.

The measurement setup changed in 2016 and includes a measurement above the snow-free ground in upwind direction (Swiss coordinates: 790191/176689). The measurement tower is equipped with one ultrasonic anemometer (CSAT3, Campbell Scientific, Inc.) in 3.3 m above the snow-free ground. Additionally, one measurement tower is installed above the long-Lasting snow patch and equipped with the same setup as 2015.

Turbulence data were sampled at a frequency of 20 Hz. The processing of the data to quality controlled fluxes has been done with the Biomicrometeorology flux software (Thomas et al., 2009). The program applies plausibility tests and a despiking test after Vickers and Mahrt (1997) on the measured data. The routine further applies a time-lag correction and considers the deployment (e.g. the sonic azimuth). A frequency response correction (Moore, 1986) is done and a three-dimensional rotation is performed. Finally, quality assurance/quality control (QA/QC) flags after Foken et al., (2004) are issued and fast Fourier transform power and co-spectra are calculated. The change in snow height is considered in the post-processing for every measurement day. The turbulence data were averaged to 30 minute intervals.

dischmex

display_name: dischmex

eddy-covariance-measurements

display_name: eddy-covariance-measurements

patchy-snow-covers

display_name: patchy-snow-covers

snow-patch

display_name: snow-patch

turbulent-sensible-heat-fluxes

display_name: turbulent-sensible-heat-fluxes

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: DISCHMEX - Impact of extreme land-surface heterogeneity on micrometeorology over spring snow-cover


dischmex-meteorological-measurements

maintainer: Rebecca Mott

title_for_slug: dischmex-meteorological-measurements

en: meteorological-data dischmex meteorological-measurements meteo-station dischma

state: active

type: dataset

en: Meteorological measurement 2015

media_type: application/zip

en: data

format: ZIP

mimetype: application/zip

en: Meteorological measurements 2016

en: Meteorological measurements 2014

media_type: application/pdf

en: Location of the meteorological stations

format: PDF

mimetype: application/pdf

en: Meteorological measurement 2014

en: Overview sensors

format: XLS

en:
Meteorological measurements recorded in the Dischma valley from 2014-2016. In 2014 and 2015 we used 11 mobile weather stations from sensorscope to record meteorological parameter in the upper Dischma valley in the closer surroundings of the Gletschboden area. The meteorological stations are eqiupped with at least air temperature/humidity, wind velocity and wind direction sensors. Some stations are additionally equipped with precipitation, shortwave radiation and snow surface temperature sensors.
Three transects were installed at different aspects and were equipped with air temperature/humidity and wind sensors. Transect 1 (stations 2-4) provides meteorological Information on an east-north-east facing slope at elevations ranging between 2100 m and 2500 m. Transect 2 (stations 5-7) provides meteorological Information on a south-west slope and transect 3 (stations 8-10) on a north-west slope. Station 1 is fully equipped with meteorological sensors (temperature/humidity, wind, IR, up and downwand shortwave radiation and precipitation).
In 2016, mobile stations from sensorscope were replaced with six permanent meteorological stations. Meteorological stations 1-3 are equipped with an air temperature/humidity sensor, two wind speed sensors, a wind direction sensor and an incoming and outgoing shortwave radiation sensor. Stations 4 and 6 are equipped with an air temperature/humidity sensor and a wind speed/direction sensor. Station 5 is a equipped with an air temperature/humidity sensor, a wind speed/direction sensor, a snow surface temperature sensor, an incoming and outgoing shortwave radiation sensor and an incoming longwave radiation sensor.

dischma

display_name: dischma

meteo-station

display_name: meteo-station

meteorological-data

display_name: meteorological-data

meteorological-measurements

display_name: meteorological-measurements

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

it: Istruzione, cultura e sport

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: DISCHMEX - Meteorological measurements


maintainer: Matthias Haeni

en: relative-humidity par wind-speed long-term temperature meteorology swiss-forest-lab climate-change precipitation meteo

en: Data plot of the forest station (ALB)

en: Data overview for air temperature, relative humidity, precipitation, PAR, wind speed.

en: Site aerial photo (Alpthal)

en: Site aerial photo from the Alpthal forest station. Source: Google. 2016. Site aerial photo from the Alpthal forest station. Retrieved November 11, 2016, from https://www.google.ch/maps

format: SERVICE

mimetype: image/jpeg

en: Forest station data (ALB)

media_type: text/csv

format: CSV

mimetype: text/csv

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for one meteorological station in Alpthal in Switzerland which is located within a natural coniferous forest (ALB) with Norway spruce (_Picea abies_; 180-230 yrs) as dominant tree species. The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Alpthal is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

wind-speed

display_name: wind-speed

en: Alpthal, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1997 onwards


en: antarctica sea-ice snow-roughness drone snow-temperature uav irra snow

en:
This dataset accompanies the publication "How Flat is Flat? Investigating the spatial variability of snow surface temperature and roughness on landfast sea ice using UAVs in McMurdo Sound, Antarctica".
The dataset consists of 1) processed orthomosaic of RGB values, snow topography (digital elevation model), and surface temperature, 2) topography-dependent irradiance map, and 3) point data of measured radiation and atmospheric parameters in the McMurdo Sound, October-December 2022. The data was collected as part of the New Zealand Marsden Fund Research Grant 21-VUW-103 "Can Snow Change the Fate of Antarctic Sea Ice?". Unprocessed data associated with this field campaign are published in 10.16904/envidat.633.
For the airborne measurements, we used a DJI Matrice 30T, a multi-rotor (quadcopter) UAV with self-heating batteries, suitable for operations in polar conditions (temperature range from -20 to +50 °C). The UAV has a wide-angle camera (12 megapixels) for RGB images and a thermal camera (Uncooled Vox Microbolometer, long-wave infrared spectrum 8-14 µm, 1.31 megapixels) for TIR images with an accuracy of ±2 °C or ± 2 %.
GNSS data includes high-precision location information (latitude, longitude, ellipsoidal height, receiver clock offset, and timestamps formatted in decimal hours and day-of-year notation).
WE calculated the distribution of received solar irradiance over the sea-ice surface using a terrain-corrected radiative transfer model and measured shortwave radiation components, accounting for surface roughness, aspect, slope, and solar position during the flight, while applying terrain shading and measured diffuse radiation.
The broadband radiation station data consists of shortwave (Sw) and longwave (Lw) radiation measurements (Kipp & Zonen CMP22 pyranometers and CGR4 pyrgeometers).
Surface temperature readings from cold, sediment, and hot targets were recorded using Apogee SI-121-SS sensors.
This dataset also contains automated weather station (AWS) data (air and snow surface temperatures, relative humidity, wind direction, and wind speed).
For detailed information, please use the README file.

antarctica

display_name: antarctica

drone

display_name: drone

irra

display_name: irra

sea-ice

display_name: sea-ice

snow

display_name: snow

snow-roughness

display_name: snow-roughness

snow-temperature

display_name: snow-temperature

uav

display_name: uav

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow On Antarctic Sea Ice - McMurdoSound 2022 - UAV Retrievals of Snow Topography and Snow Surface Temperature


maintainer: EnviDat Support

en: anisotropy elasticity x-ray-tomography crystallographic fem microstructure geometrical

en:
The study aims to determine the effective elastic properties of snow, firn, and bubbly ice based on microstructural quantities. Anisotropy, one of these quantities (the other being ice volume fraction) in snow and ice, has two types: geometrical and crystallographic, resulting in snow's macroscopic anisotropic elastic behavior. The research focuses on the impact of geometrical anisotropy on potential ice volume fractions in snow and ice. 391 micro-CT images from various locations, including laboratories, the Alps, the Arctic, and Antarctica, were analyzed to achieve this.
 The analysis involved microstructure-based finite element simulations, which inherently consider microstructure and calculate the elasticity tensor. Hashin-Shtrikman bounds were utilized to predict the elastic properties of the microstructure samples. These bounds effectively captured the nonlinear interplay between geometrical anisotropy, captured by the Eshelby tensor and density. HS bounds have the advantage of the correct limiting behavior for low to high-ice volume fractions.
 We derived parameterization for five transversely isotropic elasticity tensor components, requiring only two free parameters. This parameterization was valid for ice volume fractions ranging from 0.06 to 0.93. The analysis employing the Thomsen parameter highlighted the dominance of geometrical anisotropy until an ice volume fraction of 0.7. However, to fully comprehend the elasticity of bubbly ice, a comprehensive approach is necessary to integrate coupled elastic theories that account for both geometrical and crystallographic anisotropy.
This dataset includes a Jupyter notebook with all the necessary functions required to predict the elasticity tensor of snow for the given ice volume fraction and anisotropy. Also, the code contains the least squares optimization function to compute the elasticity tensor for the six components of stress and strain. For example, we consider our dataset to calculate the samples' elasticity tensor and reproduce Fig. 7 from the paper. We take the stress and strain values obtained from load states as input for this example.
Also, a .csv file contains all the microstructural information: ice volume fraction, anisotropy, correlation functions, voxels size, and no. of voxels of the samples and the elasticity tensor obtained from finite element simulations and from present work parameterization.

anisotropy

display_name: anisotropy

crystallographic

display_name: crystallographic

elasticity

display_name: elasticity

fem

display_name: fem

geometrical

display_name: geometrical

microstructure

display_name: microstructure

x-ray-tomography

display_name: x-ray-tomography

en: Effective, anisotropic elasticity tensor of snow, firn, and bubbly ice


en: temperature swiss-forest-lab par long-term climate-change meteo meteorology relative-humidity precipitation wind-speed

en: Site aerial photo (Vordemwald)

en: Site aerial photo from both Vordemwald stations. Source: Google. 2016. Site aerial photo from both Vordemwald stations. Retrieved November 11, 2016, from https://www.google.ch/maps

en: Forest station data (VOB)

en: Data file.

en: Site photo of the forest station (VOB)

en: Site photo of the forest station from the side.

en: Data plot of the forest station (VOB)

en: Field station data (VOF)

en: Data plot of the field station (VOF)

en: Site photo of the field station (VOF)

en: Site photo of the field stationfrom the side.

en: High quality meteorological data are needed for long-term forest ecosystem research, particularly in the light of global change. The long-term data series published here comprises almost 20 years of measurements for two meteorological stations in Vordemwald in Switzerland where one station is located within a natural mixed forest stand (VOB) with European silver fir (_Abies alba_; 110 yrs) and oak trees (_Quercus sp._; 190-210 yrs) as dominant tree species. A second station is situated in the very vicinity outside of the forest (field station, VOF). The meteorological time series are presented in hourly time resolution of air temperature, relative humidity, precipitation, photosynthetically active radiation (PAR) and wind speed. Vordemwald is part of the Long-term Forest Ecosystem Research Programme (LWF) established and maintained by the Swiss Federal Research Institute WSL.

climate-change

display_name: climate-change

long-term

display_name: long-term

meteo

display_name: meteo

meteorology

display_name: meteorology

par

display_name: par

precipitation

display_name: precipitation

relative-humidity

display_name: relative-humidity

swiss-forest-lab

display_name: swiss-forest-lab

temperature

display_name: temperature

en: Vordemwald, Switzerland: Long-term forest meteorological data from the Long-term Forest Ecosystem Research Programme (LWF), from 1996 onwards


en: coral-reefs caribbean-region marine teleo edna fish-composition environmental-dna curacao fish

en: Data access

en:
Fish taxonomic, functional and phylogenetic composition variations recovered from eDNA metabarcoding along the coast of Curacao

In February 2020, we collected a total of 20 water samples, from 10 stations, with two filtration replicates per station, in the two investigated coastal areas. Each station consisted of a transect of 2 km at an overall constant distance from the coast. We recorded the GPS coordinates at the start and end of the transect, which we used to map the transect positions. We conducted eDNA sampling by using a filtration device composed of an Athena® peristaltic pump (Proactive Environmental Products LLC, Bradenton, Florida, USA; nominal flow of 1.0 L/min), a VigiDNA® 0.20 μM cross-flow filtration capsule (SPYGEN, le Bourget du Lac, France) and disposable sterile tubing for each filtration capsule. We performed two filtration replicates in parallel on each side of a boat, at each station, for 30 min corresponding to a volume of ~30 L of water filtered by each capsule. At the end of each filtration, the water inside the capsules was emptied, and we filled the capsules with 80 ml of CL1 Conservation buffer (SPYGEN, le Bourget du Lac, France) and stored at room temperature. We followed a strict contamination control protocol in both field and laboratory stages (Valentini et al., 2016). Each water sample processing included the use of disposable gloves and single-use filtration equipment to avoid any risk of contamination. Libraries were prepared with ligation using the MetaFast protocol (Fasteris).

caribbean-region

display_name: caribbean-region

coral-reefs

display_name: coral-reefs

curacao

display_name: curacao

edna

display_name: edna

environmental-dna

display_name: environmental-dna

fish

display_name: fish

fish-composition

display_name: fish-composition

marine

display_name: marine

teleo

display_name: teleo

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Environmental DNA Marine Curacao 2020


en: geochemical-solutes stream-water precipitation stable-water-isotopes spatially-distributed-sampling

en: The dataset contains daily measurements of volumes, isotopes and solutes of stream water as well as precipitation measured several locations; meteorological variables are added. Date: 18.07.2019

en:
This dataset contain measurements of solute and stable water isotopes in stream water and precipitation in the Alp catchment and two of its tributaries (between 2015 -2018) . The river Alp is a snow-dominated catchment situated in Central Switzerland characterized by an elevation range from 840 to 1898 m a.s.l. The dataset provides solutes (major anions and cations, trace metals) and stable water isotopes and water fluxes (precipitation rates, discharge) at daily intervals from several sampling locations.
An updated version of the isotope dataset is available here: https://www.doi.org/10.16904/envidat.242

geochemical-solutes

display_name: geochemical-solutes

spatially-distributed-sampling

display_name: spatially-distributed-sampling

stable-water-isotopes

display_name: stable-water-isotopes

stream-water

display_name: stream-water

en: Daily data of solute and stable water isotopes in stream water and precipitation in the Alp catchment, Central Switzerland


en: sdms frost-change-velocity precipitation ground-temperature aridity soil

media_type: image/tiff

en: Soil clay content modified from SoilGrids

format: TIFF

en: Soil organic carbon content modified from SoilGrids

en: Frost change frequency modified from CHELSA

en: Mean annual temperature modified from CHELSA

en: Soil pH modified from SoilGrids

en: Precipitation of driest quarter modified from CHELSA

en: Precipitation seasonality from CHELSA

en: Mean diurnal range modified from CHELSA

en: The dataset contains seven environmental layers (average annual temperature, aridity [annual precipitation divided by annual potential evapotranspiration], frost change frequency, precipitation in the driest quarter, mean diurnal temperature range, and precipitation seasonality) modified from CHELSA (https://chelsa-climate.org/) and three soil layers (soil organic matter content, pH water, and clay content) modified from SoilGrids (https://soilgrids.org/).

aridity

display_name: aridity

frost-change-velocity

display_name: frost-change-velocity

ground-temperature

display_name: ground-temperature

precipitation

display_name: precipitation

sdms

display_name: sdms

soil

display_name: soil

en: Environmental layers for SDM simulations (GDPlants)


maintainer: Stephan Zimmermann

en: soil nutrient mass-balance beech sustainability

en: With this study, our aim was to estimate the nutrient fluxes relevant for assessing nutrient sustainability as accurately as possible and to calculate nutrient balances for alternative forest management scenarios. Furthermore, we tested whether mapping units from existing geologic maps can serve as a basis for forest practitioners to estimate nutrient sustainability or whether more detailed data is needed. Positive fluxes include deposition and weathering, while negative fluxes include losses due to leaching and nutrient removal through timber harvesting in the balance. Weathering and leachate losses were modeled with a geochemical model. The SwissStandSim model was used to simulate the biomass growth under different harvesting and silvicultural strategies, allowing sustainability to be assessed for each nutrient at a given intensity of use. This assessment was made per rotation period of 100 years based on two criteria: i) nutrient supply; and ii) total stocking volume.

beech

display_name: beech

mass-balance

display_name: mass-balance

nutrient

display_name: nutrient

sustainability

display_name: sustainability

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Nutrient sustainability in beech forests


en: first-order-catchment alptal snow subalpine meteorological-data runoff

en: Snow measurements Alptal 1969-2024 EnviDat updated

en: Snow depth, snow density and snow water equivalent have been measured since winter 1968/69 along more than 15 transects distributed across the Alptal valley representing different altitudes, aspects and land use (closed forest and open meadows). Length of the snow courses: 20 to 30 m. The measurement interval has been weekly to monthly. More details about the locations and methods can be found in Stähli, M.; Gustafsson, D., (2006). Long-term investigations of the snow cover in a subalpine semi-forested catchment. Hydrological Processes, 20, 411-428. doi: 10.1002/hyp.6058.

en: Meteorological data Alptal 1968-2024 EnviDat updated

en:
Air temperature, dew point temperature, relative humidity, wind speed, precipitation and global radiation have been measured (since 1981) on a meadow (Erlenhöhe) in the Erlenbach catchment. It is located at 1'220 m a.s.l. with an exposure towards west. In order to assess the spatial variability of precipitation, two additional rain gauges have been running in the Vogelbach and Lümpenenbach catchment, respectively. For the period before 1981, meteorological variables have been extrapolated from the nearby MeteoSwiss station Einsiedeln (ca. 15 km north) to the WSL station Erlenhöhe using a linear correction factor for air temperature, wind speed and precipitation. Snow depth has been recorded automatically since 2003. Snow water equivalent has been calculated using two numerical models: COUP model (Jansson, 2012) and DeltaSnow model (Winkler et al., 2021)
Jansson, P.-E. (2012). COUP model: model use, calibration, and validation.Transactions of the ASABE, 55(4), 1335–1344. Winkler, M., et al. (2021): Snow water equivalents exclusively from snow depths and their temporal changes: the Δsnow model, Hydrol. Earth Syst. Sci., 25, 1165-1187, 10.5194/hess-25-1165-861 2021.

en: Manual snow measurements Alptal (1968-2022)

en: Daily runoff data from three steep torrents in the Alptal (1968-2022)

en: Runoff, water temperature and electrical conductivity have been measured since 1968 at the outlet of three torrential catchments (with an area of approximately 1 km2 each) located in the Alptal valley: Erlenbach, Lümpenenbach and Vogelbach. This data set provides daily mean values; data at 10-min resolution can be provided on request for the period 1984-2022 (contact: alptal@wsl.ch).

en: Daily meteorological and snow data (1968-2022) Alptal

en:
Air temperature, dew point temperature, relative humidity, wind speed, precipitation and global radiation have been measured (since 1981) on a meadow (Erlenhöhe) in the Erlenbach catchment. It is located at 1'220 m a.s.l. with an exposure towards west. In order to assess the spatial variability of precipiation, two additional rain gauges have been running in the Vogelbach and Lümpenenbach catchment, respectively.
For the period before 1981, meteorological variables have been extrapolated from the nearby MeteoSwiss station Einsiedeln (ca. 15 km north) to the WSL station Erlenhöhe using a linear correction factor for air temperature, wind speed and precipitation.
Snow depth has been recorded automatically since 2003. Snow water equivalent has been calculated using two numerical models: COUP model (Jansson, 2012) and DeltaSnow model (Winkler et al., 2021)

Jansson, P.-E. (2012). COUP model: model use, calibration, and validation.Transactions of the ASABE, 55(4), 1335–1344.
Winkler, M., et al. (2021): Snow water equivalents exclusively from snow depths and their temporal changes: the Δsnow model, Hydrol. Earth Syst. Sci., 25, 1165-1187, 10.5194/hess-25-1165-861 2021.

en: Runoff daily mean Alptal 1968-2024 EnviDat updated

en: Runoff, water temperature and electrical conductivity have been measured since 1968 at the outlet of three torrential catchments (with an area of approximately 1 km2 each) located in the Alptal valley: Erlenbach, Lümpenenbach and Vogelbach. This data set provides daily mean values; data at 10-min resolution can be provided on request for the period 1984-2024 (contact: alptal@wsl.ch).

en:
This data set includes 56 years of hydrometeorological measurements from small (first-order) catchments in the pre-alpine valley Alptal. Here we provide daily mean values; values in hourly or 10-min resolution can be provided on demand.
Runoff has been measured at the outlet of three small (first-order) catchments of approximately 1 km2 area: Erlenbach (two independent runoff measurements), Vogelbach and Lümpenenbach. The catchments are similar with regard to geology (Flysch) and soil conditions (clay soils), but differ in forest coverage (20 to 60%). A detailed description of the catchments can be found at https://www.wsl.ch/alptal .
Runoff in these small catchments is typically very dynamic and can temporally carry large amounts of sediment and large wood. Thus, the accuracy of the measurements at very large flow is limited.
Meteorological variables have been measured on a meadow (Erlenhöhe) located in the Erlenbach catchment at 1220 m a.s.l. using a standard meteorological station (incl. ventilated air temperature and heated rain gauges). In addition, precipitation has also been recorded at two other locations (in the Vogelbach and Lümpenenbach catchments).
Snow measurements have been conducted weekly to monthly since 1968 at more than 15 locations (30-m transects) representing different altitudes, aspects and land uses (meadow, forest). In addition, snow depth has been recorded continuously since 2003 at Erlenhöhe, and for this location we also include a simulation of snow depth and SWE (using the numerical models COUP and DeltaSnow) that assimilates the manual weekly snow-course measurements. Details on these snow measurements can be found in Stähli, M. and Gustafsson, D. 2006. Hydrol. Proc., 20, 411-428. doi: 10.1002/hyp.6058.
Further information on the methods and sensors can be found at https://www.wsl.ch/alptal .
A first version of this data set (for the period 1968-2017) was uploaded in June 2018 at the occasion of the 50-year anniversary. This original data set was updated in February 2021 (with data from 2018 and 2019), and this data set was used for a longterm trend analysis, submitted for publication in a special issue of Hydrological Processes. Further updates of the data set (with data from 2020 to 2022) were uploaded in March 2023, February 2024 and March 2025.

alptal

display_name: alptal

first-order-catchment

display_name: first-order-catchment

meteorological-data

display_name: meteorological-data

runoff

display_name: runoff

snow

display_name: snow

subalpine

display_name: subalpine

en: Longterm hydrological observatory Alptal (central Switzerland)


en:
Attention: this data is not updated after 2022 anymore.
This dataset contains the statistics on the number of avalanche fatalities per **calendar year** in Switzerland. The data collection commences with the beginning of the year 1937. After the completion of a hydrological year, which is the standard way avalanche fatalities are summarized in Switzerland and ends on the 30th of September, the new data is appended to the existing dataset.
If you require annual statistics per hydrological year, please download the data from here: [https://www.envidat.ch/dataset/avalanche-fatalities-switzerland-1936]
The following information is contained (by column and column title):
 - year
 - number of fatalities in the backcountry (=tour)
 - number of fatalities in terrain close to ski areas (=offpiste, away from open and secured ski runs)
 - number of fatalities on transportation corridors including ski runs, roads, railway lines (=transportation.corridors)
 - number of fatalities in or around buildings or in settlements (= buildings)
 - sum (of all four categories)
The definitions for these four categories, as described in the guidelines to the avalanche accident database are:
tour:
activities include back-country ski, snowboard or snow-shoe touring
offpiste:
access from ski area, generally from the top of a skilift with short hiking distances
transportation.corridors (Techel et al., 2016):
people travelling or recreating on open or temporarily closed transportation corridors (e.g. a road user or a skier on a ski run) and people working on open or closed transportation corridors (e.g. maintenance crews on roads, professional rescue teams)
buildings (Techel et al., 2016):
people inside or just outside buildings, and workers on high alpine building sites

avalanche-accident-statistics

display_name: avalanche-accident-statistics

avalanche-fatalities

display_name: avalanche-fatalities

fatalities-in-or-around-buildings

display_name: fatalities-in-or-around-buildings

fatalities-in-settlements

display_name: fatalities-in-settlements

fatalities-in-the-backcountry

display_name: fatalities-in-the-backcountry

fatalities-on-transportation-corridors

display_name: fatalities-on-transportation-corridors

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Number of avalanche fatalities per calendar year in Switzerland since 1937


en: antarctica terrestiral-laserscanning gridded-data terrestrial-laser-scans depth-of-snowfall

en: Scan from 2 January 2019, 1 mm resolution

en: Deprecated: Scan from 11 January 2019, 10 cm resolution, version 1

en: This resource is deprecated. It contains erroneous data.

en: Scan from 2 January 2019, 10 cm resolution

en: Scan from 21 December 2018, 10 cm resolution

en: Scan from 4 January 2019, 1 mm resolution

en: Scan from 11 January 2019, 10 cm resolution, version 2

en: Scan from 4 January 2019, 10 cm resolution

en: Scan from 11 January 2019, 1 mm resolution

en: Scan from 27 December 2018, 10 cm resolution

en: Scan from 21 December 2018, 1 mm resolution

en: Scan from 27 December 2018, 1 mm resolution

en:
Surface topography maps (spatial extent: 400 m x 400 m) obtained at approximately 300 m from the top of the Hammarryggen Ice Rise in Dronning Maud Land, East Antarctica, using a Riegl VZ-6000 Terrestrial Laser Scanner (TLS). Scans were obtained on 5 days in the 2018-2019 Austral summer: on December 21 and 27, and January 2, 4 and 11. By using reflectors installed on bamboo poles, scans were registered with respect to the reflectors, such that the difference between two successive scans reveals the spatial patterns of erosion and deposition of snow. On each scan day, we used multiple scan positions to create one combined point cloud. After applying an octree filter on the point cloud, a 3D surface was obtained. For each day, the dataset contains a 1 mm and a 10 cm octree filter resolution file, only including points in a 400 m x 400 m area centered around the scan positions.

Notes:

* All files in the dataset are in the same coordinate system. However, this coordinate system is arbitrary (i.e., not related to any global coordinate system).

* From the installed reflectors, 4 reflectors could be used over the full period. The scan accuracy is generally higher within the area enclosed by the reflectors.

* The scans from January 2 were found to have exhibited small tilt during the scan and are of lesser accuracy.

* By walking along fixed corridors, disturbance of the snow was limited.

antarctica

display_name: antarctica

depth-of-snowfall

display_name: depth-of-snowfall

gridded-data

display_name: gridded-data

terrestiral-laserscanning

display_name: terrestiral-laserscanning

terrestrial-laser-scans

display_name: terrestrial-laser-scans

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Terrestrial laser scans on Hammarryggen Ice Rise, Dronning Maud Land, East Antarctica


en: streamflow alptal runoff stable-water-isotopes groundwater

en: Deuterium streamwater extra event

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date and time of sample collection (UTC; year-month-day, hours:minutes)
Q d.D: Deuterium composition (per mil) of streamwater sampled at the catchment outlet (697234,210472); the first sample is used as pre-event streamflow sample

en: Deuterium groundwater and baseflow August 2017

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

Date: Date (year-month-day)
Location: Well number or outlet
X: X coordinate (CH1903 LV03)
Y: Y coordinate (CH1903 LV03)
riparian: riparian wells (i.e. from the riparian-like cluster as presented in Kiewiet et al. (2019)) are marked a one, all other wells are marked a zero
d.D (per mil): Deuterium composition (per mil)

en: Deuterium groundwater and baseflow October 2016

en: Precipitation and discharge extra event

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
With any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date (year-month-day) and time (hours:minutes:seconds) in UTC
Q: Discharge in mm per hour at catchment outlet (697234,210472)
P: Rainfall in mm per hour averaged for two rain gauges (697494,210675) and (698004, 210680)

en: Deuterium streamwater event A

en: Deuterium groundwater and baseflow October 2017

en: Deuterium rainfall extra event

en:
This data is collected at the Studibach catchment (Alptal, Switzerland) by Leonie Kiewiet (University of Zürich)
For any questions about the data, please contact leonie.kiewiet@geo.uzh.ch or leoniekiewiet@gmail.com

datetime: Date (year-month-day) and time (hours:minutes:seconds) in UTC
P d.D: Deuterium composition of the rainfall samples (per mil)
X: X coordinate (CH1903 LV03)
Y: Y coordinate (CH1903 LV03)

en: Precipitation and discharge event A

en: Precipitation and discharge event B

en: Deuterium rainfall event A

en: Deuterium streamwater event B

en: Deuterium streamwater event C

en: Precipitation and discharge event C

en: Deuterium rainfall event C

en: Deuterium rainfall event B

en:
This dataset includes discharge and rainfall measurements and deuterium compositions of streamflow, rainfall and groundwater, for four rainfall events and three baseflow snapshot campaigns in the Studibach (Alptal, Switzerland). More specifically, we present the following data:

- Specific discharge at the catchment outlet at 5-minute resolution (mm per hour);
- Rainfall at 5-minute resolution (mm per hour);
- Rainfall deuterium composition (‰);
- Stormflow deuterium composition (‰);
- Groundwater and baseflow deuterium compositions (‰).

For the files containing rainfall and discharge timeseries (QP), and rainfall and streamwater deuterium compositions ("Deuterium_Rainfall" and "Deuterium_Streamwater"), we added the corresponding event identifier (A, B, C or extra) to the file names. For the files containing the groundwater and baseflow deuterium values ("Deuterium_Snapshot") we added the sample collection date to the file name. We included the X and Y coordinates for each data point (coordinate system: CH1903 LV3) as well as the date and time (UTC).

More information on the data collection and preparation can be found in Kiewiet et al. (in review). A detailed description of the baseflow snapshot campaigns can also be found in Kiewiet et al., 2019.

en: Discharge, rainfall, and deuterium compositions of streamwater, rainwater and groundwater, for four rainfall events in the Studibach, Alptal, Switzerland


maintainer: Leonie Schönbeck

en: vpd fluorescence acclimation drought photosynthesis gas-exchange pinus-sylvestris

en: Instrument details

en:
Instrument details for all LiCor instruments used during collection of dataset.

Metatdata created following guidelines from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Methods survey

en: Parameters and methods for point measurements / survey measurements

en: Methods light response

en: Methods and parameters for light response curves

en: Pfynwald gas exchange

en:
Full dataset of Pfynwald gas exchange data taken in the period from June 2013 to October 2020.
All metdata can be found in attached documents.
Data uploaded after quality control using guidelines by Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Methods fluorescence

en:
Parameters and methodology for Fluorescence measurements

Metadata format from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Variable names and units

en: Variable names, description and units for the Pfynwald Gas exchange data

en: Methods ACi curves

en:
Parameters and methods for CO2 response curves of Photosynthesis.

Metatdata format by
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en: Methods diurnal measurements

en:
Parameters and methodology for diurnal measurements

Metadata format from
Ely et al (2021). A reporting format for leaf-level gas exchange data and metadata. Ecological Informatics. https://doi.org/10.1016/j.ecoinf.2021.101232

en:
Gas exchange was measured on control, irrigated and irrigation-stop trees at the irrigation experiment Pfynwald, during the years 2013, 2014, 2016-2020. The measurement campaigns served different purposes, resulting in a large dataset containing survey data, CO2 response curves of photosynthesis, light response curves of photosynthesis, and fluorescence measurements. Measurements were done with LiCor 6400 and LiCor 6800 instruments. Until 2016, measurements were done on excised branches or branches lower in the canopy. From 2016 onwards, measurements were done in the top of the canopy using fixed installed scaffolds.
All metadata can be found in the attached documents.

acclimation

display_name: acclimation

drought

display_name: drought

fluorescence

display_name: fluorescence

gas-exchange

display_name: gas-exchange

photosynthesis

display_name: photosynthesis

pinus-sylvestris

display_name: pinus-sylvestris

vpd

display_name: vpd

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: 2013-2020 gas exchange at Pfynwald


greenland-climate-network-gc-net-data

title_for_slug: greenland-climate-network-gc-net-data

en: greenland air-temperature automatic-weather-station net-radiation climate aws

en: Access the latest L1 data

en:
The GC-Net is kindly continued by the Geological Survey of Denmark and Greenland (GEUS).

Starting October 3, 2022, the access to the latest versions of the "ready to use" L1 data has been migrated to GEUS, (doi:10.22008/FK2/VVXGUT). Future versions will be available from GEUS, while the initial version of L1 data has been archived.

en: GC Net Config for Stations

media_type: application/json

en: Stations Config from the static bucket

format: JSON

en: Archived GC-Net Data (deprecated)

en:
The GC-Net is kindly continued by the Geological Survey of Denmark and Greenland (GEUS).

Starting October 3, 2022, the access to the latest versions of the "ready to use" L1 data has been migrated to GEUS, (doi:10.22008/FK2/VVXGUT). Future versions will be available from GEUS, while the initial versions of L0 and L1 data have been archived.

en: 22-Petermann ELA

en: GC Net Chart Parameters

en: Stations parameters from static bucket

en:
In Memory of Dr. Konrad (Koni) Steffen

Update October 2022: The GC-Net is kindly continued by the Geological Survey of Denmark and Greenland (GEUS).
Starting October 3, 2022, the access to the latest versions of the "ready to use" L1 data has been migrated to GEUS. Future data versions will be available at: [https://doi.org/10.22008/FK2/VVXGUT](https://doi.org/10.22008/FK2/VVXGUT)
 Background
Starting with a single station in 1991, the Greenland Climate Network (commonly known as GC-Net) is a set of Automatic Weather Stations (AWS) set up and managed by the late Prof. Dr. Konrad (Koni) Steffen, and spanning the Greenland Ice Sheet (GrIS). This first station was "Swiss Camp" or the "ETH-CU" camp (GC-Net station 01) which was used as a field science and education site by Koni for years. The GC-Net was expanded with multiple NASA, NOAA, and NSF grants throughout the years, and then supported by WSL in the later years. These data (see "C-file" below) were previously hosted by the Cooperative Institute for Research in Environmental Sciences (CIRES) in Boulder, Colorado.

 Overview
Provided in this dataset are the 16 longest running stations in the network, which are spread over a significant area of the GrIS and the majority of the unique climatic zones. From the South Dome high point in the South, to the Western Jakobshavn ablation region in the west, to the Petermann glacier in the North across east of the Northeast Greenland Ice Stream to the east, GC-Net is the longest running climatological record of Greenland.

 The standard GC-Net station consists of:
* Air temperature measurements at 2 heights above the surface
* Temperature and humidity measurements at 2 heights above the surface
* Wind speed and direction measured at 2 heights above the surface
* Sonic distance sounder measurements for 2 snow height and distance of instruments to surface
* Incoming shortwave radiation measurement
* Reflected shortwave radiation measurement
* Net broadband radiation (long- and short-wave) measurement
* Air pressure measurement
Data have often been repatriated in near-real time using one of either the GOES geostationary satellite or the ARGOS polar orbiting satellite transmission system. The stations were visited typically every 1-2 years for maintenance and service, and to download full uncorrupted data directly from the dataloggers. GC-Net stations were visited by Twin Otter equipped with snow skids to land directly on the open-ice at the AWS locations, or by helicopter near the west coast. The AWSs operate on solar and battery power and occasionally lost power during the dark and cold winter months, particularly when the batteries were aging.

 Dataset
This dataset consists of 2 main data levels; Level 0 and Level 1.
Level 0 is the raw data from the dataloggers, historical processing codes, satellite transmissions, and Koni’s personal data archive. Level 0 data (.zip) directories contain subdirectories:
* “C file” - contains the historical processed datafile for each station.
* “Campbell logger files” - contains the raw csv datafiles from the stations’ Campbell Scientific dataloggers since the CR1000 era (~2007-2008 for most stations).
* “Photos” - contains photographs of the station when available marked by year.
Level 1 is the appended, calibrated, cleaned, and quality flagged data. The full processing scheme is open-source and publicly available on the following GitHub repository (please also check GitHub for the latest L1 data):
[GC-Net L1 data on GitHub](https://github.com/GEUS-Glaciology-and-Climate/GC-Net-level-1-data-processing "GC-Net-level-1-data-processing")
Level 1 data is provided in the newly described csv-compatible [NEAD format](https://www.envidat.ch/#/metadata/nead "NEAD format").

 Additional Details
Dataset description publication will be forthcoming.
The Geological Survey of Denmark and Greenland (GEUS) has been imperative in the reprocessing and continuity mission of GC-Net. Multiple GC-Net stations have been replaced with updated and upgraded AWS hardware at the same coordinates by GEUS. This effort will ensure continuity of the GC-Net dataset into the future.

air-temperature

display_name: air-temperature

automatic-weather-station

display_name: automatic-weather-station

aws

display_name: aws

climate

display_name: climate

greenland

display_name: greenland

net-radiation

display_name: net-radiation

en: Greenland Climate Network (GC-Net) Data


en: afforestation treeline mountain-forest stillberg long-term-experiment

en: Documentation

en: This data documentation is outdated and has been replaced with an updated version (see description).

mimetype: application/msword

en: Site photo

en: This site photo is outdated and has been replaced with an updated version (see description).

en: Dataset V1

en: This dataset is outdated and has been replaced with an updated version (see description).

format: GDB

en:
 Important
This EnviDat entry is outdated. The most recent, usable version of the data can be found under the new EnviDat entry "Long-term afforestation experiment at the Alpine treeline site Stillberg, Switzerland." The entry can be found under this link <https://www.envidat.ch/dataset/afforestation-stillberg> and with this DOI 10.16904/envidat.397.

afforestation

display_name: afforestation

long-term-experiment

display_name: long-term-experiment

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline

display_name: treeline

en: Long-term treeline research dataset at Stillberg, Davos


en: snow-hydrology snow-depth-distribution photogrammetry davos avalanches dischma

en: Snowdepth maps

format: GeoTIFF

en:
The available datasets are snow depth maps with a spatial resolution of 0.5 m derived from images of the survey camera Vexcel Ultracam mounted on a piloted airplane. Image acquisition was carried out during the approximately peak of winter (time when the thickest snowpack is expected) in spring. The snow depth maps are calculated by the subtraction of a summer-DTM from the processed winter- DSM of the corresponding date. The summer-DTM used was derived from a point cloud of an airborne laser scanner from 2020.

Due to the occurrence of inaccuracies of the calculated snow depth values caused by the photogrammetric method, we applied different masks to significantly increase the reliability of the snow depth maps. We masked out settled areas, high-frequented streets and technical constructions, pixels with high vegetation (height > 0.5 m) , outliers and unrealistic snow depth values. In addition, we modified the snow depth values of snow-free pixels to 0.
The information on buildings and infrastructure comes from the exactly classified ALS point cloud and the TLM dataset from Swisstopo (https://www.swisstopo.admin.ch/de/geodata/landscape/tlm3d.html#links). High vegetation is also derived from the classification and the calculated object height from the point cloud.
Outliers and unrealistic snow depth values are defined as negative snow depth values and snow depths exceeding 10 m. The classification of each pixel of the corresponding orthophoto into snow-covered or snow-free is based on the application of a threshold of the NDSI or manually determined ratios of the RGB values.

An extensive accuracy assessment proves the high accuracy of the snow depth maps with a root mean square error of 0.25 m for the year 2017 and 0.15 m for the following snow depth maps.

The work is published in:

avalanches

display_name: avalanches

davos

display_name: davos

dischma

display_name: dischma

photogrammetry

display_name: photogrammetry

snow-depth-distribution

display_name: snow-depth-distribution

snow-hydrology

display_name: snow-hydrology

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Snow depth mapping by airplane photogrammetry (2017 -  ongoing)


maintainer: Irene Cordero

en: heatwave land-use soil drought pesticide soil-biodiversity soil-nutrients

en: All soil data

en: Soil physicochemical characteristics

en:
Soil chemical and biological properties of soils affected by 10 different perturbations related with global change, applied individually or in combination. Greenhouse experiment. Perturbations applied to intact soil cores (15 cm diameter, 15 cm deep) collected in an extensively managed grassland on the WSL grounds in June 2023.
This dataset contains all data on which the publication below was based:
"Fioratti Junod M, Gombeer S, Holmes J, Zimmerman S, Rillig M, Risch AC and Cordero I. Soil functionality declines under multiple superimposed global change perturbations. XXXX "
Please, cite this publication together with the citation of the datafile.
Database includes:
Pot_ID: pot or soil core identifier.
Batch: numeric, 1 or 2.
Enzyme_plate: numeric, from 1 to 6.
Number_of_perturbations: numeric, from 0 to 10.
N_addition: binary. Yes = 1, No = 0.
P_addition: binary. Yes = 1, No = 0.
Defoliation: binary. Yes = 1, No = 0.
Trampling: binary. Yes = 1, No = 0.
Insecticide: binary. Yes = 1, No = 0.
Fungicide: binary. Yes = 1, No = 0.
Herbicide: binary. Yes = 1, No = 0.
Antibiotic: binary. Yes = 1, No = 0.
Drought: binary. Yes = 1, No = 0.
Heat_wave: binary. Yes = 1, No = 0.
Treatment: character. Description of the treatment, 15 levels.
SWC: soil water content. Numeric, unitless.
Green_biomass: green plant biomass. Numeric, g.
Brown_biomass: brown or dead plant biomass. Numeric, g.
Biomass_cut: plant biomass cut during defoliation treatments. Numeric, g.
CO2_flux_light: net CO2 flux under ambient light. Numeric, mg CO2 m-2 h-1.
CO2_flux_dark: ecosystem respiration. Numeric, mg CO2 m-2 h-1.
S: organic matter stabilisation factor (tea bag index). Numeric, unitless.
k: organic matter decomposition rate (tea bag index). Numeric, unitless.
DOC: dissolved organic carbon, mg Kg-1 dry soil.
IC: inorganic carbon, mg Kg-1 dry soil.
Ammonium_KCl: plant available ammonium, mg Kg-1 dry soil.
Nitrate_KCl: plant available nitrate, mg Kg-1 dry soil.
Phosphate: phosphate, mg Kg-1 dry soil.
MBC: microbial biomass carbon, mg Kg-1 dry soil.
MBN: microbial biomass nitrogen, mg Kg-1 dry soil.
PHO: phosphatase activity, nmol h-1 g-1 dry soil.
BG: β-glucosidase, nmol h-1 g-1 dry soil.
XYL: xylosidase, nmol h-1 g-1 dry soil.
CBH: cellobiohydrolase, nmol h-1 g-1 dry soil.
NAG: N-acetylglucosaminidase, nmol h-1 g-1 dry soil.
LAP: leucine aminopeptidase, nmol h-1 g-1 dry soil.
POX: phenoloxidase, nmol h-1 g-1 dry soil.
PER: peroxidase, nmol h-1 g-1 dry soil.
pH: soil pH, unitless
Water_stable_aggregates: water stable aggregates, %
Surface_infiltration_time: water surface infiltration time, s.

drought

display_name: drought

heatwave

display_name: heatwave

land-use

display_name: land-use

pesticide

display_name: pesticide

soil

display_name: soil

soil-biodiversity

display_name: soil-biodiversity

soil-nutrients

display_name: soil-nutrients

en: Escalating effects of multiple perturbations on soil functionality


maintainer: Christoph Marty

en: climate-change-impacts hydrology water-cycle snow snowfall

en: DORA Persistent URL

en: Synthesis report chapter

en:
This report was prepared as one of the synthesis report chapters of the Hydro-CH2018 project of the Federal Office for the Environment (FOEN). An important feature of snow cover is the fact that its volume and duration is subject to large year-to-year fluctuations. As frozen precipitation, snow cover is nothing other than a natural water reservoir that delays precipitation to runoff and is thus of outstanding importance for the seasonal water balance in Switzerland. Over a whole year, approximately 40% (22 km3) of the annual runoff currently comes from snow melting and only 1% from glacier melting. Typically, the snow cover in the Alpine region builds up over the autumn and winter months, reaches its maximum between February and May, depending on the altitude, and dominates the runoff processes during melting in the following spring and summer months.
Due to the great dependence on minus temperatures and precipitation, the snow cover reacts sensitively to temperatures above 0° Celsius and more or less precipitation. Due to climate change and the associated warming, the proportion of precipitation that falls as snow decreases measurably. In addition to this reduction in snowfall, the warmer temperatures also cause the snow cover to melt more quickly. The decline in snowfall has so far mainly affected lower altitudes, where winter temperatures often reach positive levels.
As climate change progresses, this trend is likely to continue and above all affect higher zones. Even at higher altitudes, the snow cover will then start later, melt away earlier and is increasingly no longer permanently present. This development will also have an effect on the water bodies. Today nival regimes, i.e. regimes shaped by snow, are shifting towards pluvial regimes, i.e. regimes dominated by rain. Overall, winter runoff increases, summer runoff decreases. By the end of the century, the proportion of runoff from snowmelt will decrease throughout Switzerland, albeit to a lesser extent than the proportion from glacier melt.

climate-change-impacts

display_name: climate-change-impacts

hydrology

display_name: hydrology

snow

display_name: snow

snowfall

display_name: snowfall

water-cycle

display_name: water-cycle

en: Snow and the water cycle in a changing climate


maintainer: Virginie Marques

en: vert01 environmental-dna switzerland vertebrates freshwater sper01 spermatophytes edna

en: Data access

en:
Catchment-based sampling of river eDNA integrates terrestrial and aquatic biodiversity of alpine landscapes

From 22-Jun-2020 to 26-Jun-2020, we sampled five sites comprising one low, two intermediate and two high-elevation sites per catchment (Fig. 1a). We visited two catchments per day—one in the morning and one in the afternoon—for a total of ten catchments. All samples per catchment were collected within a maximum four-hour period by three groups of samplers. The intermediate and high-elevation sites were situated along two tributaries leading into the low-elevation site of the river. We used three filters for each relative elevation class and filtered 60 L per relative elevation class. We sampled 30 L per tributary for a combined volume of 60 L at the intermediate and high-elevation sites. In total, 180 L were sampled in total per catchment. A filtration device composed of either the Athena® peristaltic pump (Proactive Environmental Products LLC; 1 L/min nominal flow) or the Subspace® underwater peristaltic pump (Subspace Pictures; 1 L/min nominal flow), combined with a VigiDNA® 0.2 µM cross-flow filtration capsule (VigiDNA, SPYGEN) was used in order to filter a large water volume. We used a finer mesh than the recommended VigiDNA® 0.45 µM cross-flow filtration capsule to maximise the capture of biological material since mountain water does not transport high quantities of sediments. For each filtration capsule, we used disposable sterile tubing. At the end of each filtration, we emptied the water inside the capsules, replaced it with 80 ml of CL1 conservation buffer (SPYGEN), and stored it at room temperature. We followed a strict contamination control protocol in both field and laboratory stages (Goldberg et al. 2016; Valentini et al. 2016). Each water sample was processed using disposable gloves and single-use filtration equipment. We used two primer sets targeting vertebrates (Vert01, forward: − TTAGATACCCCACTATGC, reverse: − TAGAACAGGCTCCTCTAG, mean marker length: 97 bp) and spermatophytes (g-h/Sper01, forward: − GGGCAATCCTGAGCCAA, reverse: CCATTGAGTCTCTGCACCTATC, mean marker length: 48 bp). Though both primers are relatively broad with low species-level resolution, we selected them as the goal was to minimise cost and effort and maximise the identification of a broad range of taxa which can represent the species assemblages of the region. Libraries were prepared with ligation using the MetaFast protocol (Fasteris).

edna

display_name: edna

environmental-dna

display_name: environmental-dna

freshwater

display_name: freshwater

spermatophytes

display_name: spermatophytes

switzerland

display_name: switzerland

vertebrates

display_name: vertebrates

en: Environmental DNA Freshwater Switzerland VaudCatchment Modipl 2020


maintainer: Michael Lehning

en: alpine3d-simulations alpine-precipitation snow-hydrology alpine3d snow snow-distribution snow-cover

en: ADS datasets and simulation inputs

en: The file contains the ADS datasets of snow depth and input data used for simulations.

en:
Dataset (Model input, snow distribution and validation) for the precipitation scaling paper, which should be cited along with the data set citation.

This data is useful for distributed hydrological modelling or other tasks that involve the study of snow distribution and precipitation in the high Alpine.

The format of the data is for Alpine3D (models.slf.ch) model runs but other models could be used, too.

Please cite:

_Vögeli, C., Lehning, M., Wever, N., Bavay M., 2016: Scaling Precipitation Input to Spatially Distributed Hydrological Models by Measured Snow Distribution., Front. Earth Sci. 4: 108. doi: 10.3389/feart.2016.00108._

Dataset is provided as a single zip file.
The archive contains two directories, the valuable distributed snow depth maps for the landscape Davos and the simulation input.
The archive also contains the file: "ReadMeMetadataDataSetPrecipitationScaling" which explains the data structure.

alpine-precipitation

display_name: alpine-precipitation

snow-cover

display_name: snow-cover

snow-distribution

display_name: snow-distribution

snow-hydrology

display_name: snow-hydrology

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Precipitation Scaling Data Set (Vögeli et al., Frontiers)


en: soil biodiversity plants soil-biology soil-biodiversity grassland restoration bacteria nematodes fungi topsoil-removal soil-chemistry

en: Networks

en:
Treatment	Treatment groups; Y.4-18 = restored grasslands; Initial = intensively managed grasslands; Target = species-rich semi-wet to semi-dry grasslands
Correlation	non-parametric Spearman rank correlations
Vertex.1+2	Comparison between network components; N.pool = total soil nitrogen pool [kg ha-1 12 cm-1]; Corg.pool = soil organic carbon pool [kg ha-1 12 cm-1], pH = soil pH [CaCl2]; BD = bulk density [g cm-3]; FC = field capacity [%]
	PCoA 1 + 2 biotic communities [Veg = vegetation; Nem = nematoda; Fun = fungi; Prok = prokaryota]
Type	Interactions type; A.A = abiotic.abiotic; A.B = abiotic.biotic; B.B = biotic.biotic

en: Vegetation data

en:
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)
column I-LW	Plant abundance per species (in total 327 plant species) expressed as cover percentage estimation according to van der Maarel (vdM 1979; 7 classes: 1-7); nomenclature according to Lauber & Wagner (1996)

en: Fungi data

en:
Sample.data
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)

Taxonomy
OTU.ID	consecutive numbers for operational taxonomic units (OTUe 1-7794)
Taxonomic rank	Domain, Phylum, Class, Order, Family, Genus, Species

Abundance
columns	Plot.ID (see Sample.data)
rows	OTU.ID (see Taxonomy)

en: Nematode data

en:
Sample.data
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)

Taxonomy
ASV.ID	unit number.letter code per amplicon sequence variant (in total 904)
Taxonomic rank	Phylum, Class, Order, Family, Genus, Species

Abundance
columns	Plot.ID (see Sample.data)
rows	ASV.ID (see Taxonomy)

en: Ecosystem coupling_interactions

en:
Treatment	Treatment groups; Y.4-18 = restored grasslands; Initial = intensively managed grasslands; Target = species-rich semi-wet to semi-dry grasslands
Type	Interactions type; A.A = abiotic.abiotic; A.B = abiotic.biotic; B.B = biotic.biotic
Correlation	non-parametric Spearman rank correlations between biotic and abiotic parameters (ecological interactions)

en: Distance to target results

en:
Community	biotic community (vegetation, nematoda, fungi, prokaryota)
Treatment	Treatment groups; Y.4-30= restored grasslands (time since restoration); Initial=intensively managed grasslands (I)
Comparison	within- or between-community Bray-Curtis dissimilarity distance comparison
Label	within-community distances of initial/restored grasslands: treatment abbreviation; between-communities distances of initial/restored-to-target grasslands: treatment abbreviation plus Target (T; species-rich grasslands)
mean	Mean distance to Target (6 plots per treatment group)
sd	Standard deviation of distances to Target (6 plots per treatment group)

en: Soil properties

en:
Plot.ID	consecutive numbers for plots (in total 36 plots)
Treatment	One restoration treatment and two reference treatments. Topsoil+Propagules= Topsoil removal (upper 10-30 cm) combined with introduction of target plant species; Initial=intensively managed grasslands; Target= species-rich semi-wet to semi-dry grasslands
treat.yr	Treatment abbreviation. For restored grasslands: Treatment abbreviation + time since restoration; Initial + Target = NA
yr.trt	year when topsoil was removed; Initial + Target = NA
Age	time since restoration (sampling year 2018 - yr.trt); Initial + Target = NA
Age.class	restored sites of similar age grouped into four age classes. Y.4 = Year 3+4 (recently restored); Y.18 = Year 17+19 (mid-term); Y.24 = Year 23+25 (long-term); Y.30 = Year 27+32 (long-term); Initial + Target = NA
Cluster	clustered spatial arrangment of sites in the field (see Supporting Information Fig. S1)
Site	clustered spatial arrangment (replicates) of plots per site (see Supporting Information Fig. S1)
N.pool	Soil nitrogen pool (June 2017); corrected for bulk density and 12 cm sampling depth [kg ha-1 12cm-1]
Corg.pool	Soil organic carbon pool (June 2017); corrected for bulk density and 12 cm sampling depth [kg ha-1 12cm-1]
pH	soil pH [CaCl2]
BD	Bulk density [g cm-3]
FC	Field capacity [%]
Veg.1	principle coordinate axis 1 (vegetation)
Veg.1	principle coordinate axis 2 (vegetation)
Nem.1	principle coordinate axis 1 (nematoda)
Nem.2	principle coordinate axis 2 (nematoda)
Fun.1	principle coordinate axis 1 (fungi)
Fun.2	principle coordinate axis 2 (fungi)
Prok.1	principle coordinate axis 1 (prokaryota)
Prok.2	principle coordinate axis 2 (prokaryota)
Veg.H	Shannon diversity (vegetation)
Nem.H	Shannon diversity (nematoda)
Fun.H	Shannon diversity (fungi)
Prok.H	Shannon diversity (prokaryota)

en:
This dataset contains all data, on which the following publication below is based.

Paper Citation:

_Resch, M.C., Schütz, M., Ochoa-Hueso, R., Buchmann, N., Frey, B., Graf, U., van der Putten, W.H., Zimmermann, S., Risch, A.C. (in review). Long-term recovery of above- and belowground interactions in restored grassland after topsoil removal and seed addition. Journal of Applied Ecology_

Please cite this paper together with the citation for the datafile.

Study area and experimental design
The study was conducted in and around two nature reserves, Eigental and Altläufe der Glatt, which were located approximately 5 km apart (47°27´ to 47°29´ N, 8°37´ to 8°32´ E, 417 to 572 m a.s.l., Canton of Zurich, Switzerland; Figure S1 and S2, Table S1). Mean annual temperature and precipitation are 9.8 ± 0.6 °C and 990 ± 168 mm (Kloten climate station 1988-2018; MeteoSchweiz, 2019). TFor this study, we used a space-for-time approach based on eight restoration sites that were between 3 and 32 years old. We measured recovery and restoration success by comparing the restored grasslands with intensively managed and semi-natural grasslands. Using a space-for-time approach requires high similarities in historical properties of the site, such as soil conditions and management regimes, to assure that temporal processes are appropriately represented by spatial patterns (Walker et al., 2010). This was the case in our study. The restored sites had similar soil conditions (i.e., soil type, structure, water availability) as the targeted semi-natural grasslands, while they shared the same agricultural legacy with intensively managed grasslands, i.e., biomass harvest and fertilization (manure and/or slurry) three to five times a year as well as tillage. We randomly established three 5 m x 5 m (25-m2) plots for plant identification and three 2 m x 2 m (4-m2) subplots for soil biotic and abiotic data collection at least 2 m away from the 25-m2 plots in each restoration site. Sites of similar age were grouped into four age classes: Y.4 (3 & 4 years after restoration), Y.18 (17 & 19 years), Y.24 (23 & 25 years), and Y.30 (27 & 32 years). Six intensively managed (Initial) and six semi-natural grassland (Target) sites complemented the experimental set-up, for a total of 36 plots. All plots were sampled under similar conditions, i.e., day of the year, air temperature, soil moisture, and time since last rain event, in June/July 2017 (intensively managed and semi-natural plots) and 2018 (restored plots).

Collection of plants and selected soil biota data
Plant species cover (in %) was visually estimated in each 25-m2 plot in mid-June (Braun-Blanquet, 1964; nomenclature: Lauber & Wagner, 1996). We calculated Shannon diversity and assessed plant community structure. We included soil microbial (fungi, procaryotes) and nematodes in our study as they represent the majority of soil biotic diversity and abundance (Bardgett & van der Putten, 2014), cover various trophic levels of the soil food web (Bongers & Ferris, 1999), and play key roles in soil functioning and ecosystem processes (Bardgett & van der Putten, 2014). In particular, soil nematodes were found to be well suited belowground indicators to evaluate recovery/development after restoration (e.g. Frouz, et al. 2008; Kardol et al., 2009; Resch et al., 2019). We randomly collected ten soil cores (2.2 cm diameter x 12 cm depths; sampler from Giddings Machine Company, Windsor, USA) in the 4-m2 subplots to assess soil nematode and microbial (fungal, prokaryotic) diversities and community structures. For soil nematodes, eight of the soil cores were combined and gently homogenized, placed in coolers and stored at 4 °C and transported to the laboratory (Netherlands Institute of Ecology, NIOO, Wageningen, Netherlands) within three days after collection. Free-living nematodes were extracted from 200 g of fresh soil using Oostenbrink elutriators (Oostenbrink, 1960). After extraction, each sample was divided into three subsamples, two for molecular identification and one to determine nematode abundance (see Resch et al., 2019). For the molecular work, two subsamples were stored in 70% ethanol (final volume 10 mL each) and transported to the laboratory at the Swiss Federal Research Institute WSL (Birmensdorf, Switzerland). Each subsample was reduced to roughly 200 μL by centrifugation and removal of the supernatant. The remaining ethanol was vaporized (65 °C for 3 h). Thereafter, 180 μL ATL buffer solution (Qiagen, Hilden, Germany) was immediately added and samples were stored at 4 °C until further processing. From these samples, nematode metagenomic DNA was extracted using the DNeasy Blood & Tissue Kit (Qiagen, Hilden, Germany) according to the manufacturer`s protocol, except for the incubation step which was run at 56 °C for 4 h. PCR amplification of the V6-V8 region of the eukaryotic small-subunit (18S) was performed with 7.5 μL of genomic DNA template (ca. 1 ng/μL) in 25 μL reactions containing 5 μL PCR reaction buffer, 2.5 mM MgCL2, 0.2 mM dNTPs, 0.8 μM of each primer (NemF: Sapkota & Nicolaisen, 2015; 18Sr2b: Porazinska et al., 2009), 0.5 μL BSA, and 0.25 μL GoTaq G2 Hot Start Polymerase (Promega Corporation, Madison, USA). Amplification was using an initial DNA denaturation step of 95 °C for 2 min, followed by 35 cycles at 94 °C for 40 sec, 58 °C for 40 sec, 72 °C for 1 min, and a final elongation step at 72 °C for 10 min. Filtering, dereplication, sample inference, chimera identification, and merging of paired-end reads was implemented using the DADA2 pipeline (v.1.12; Callahan et al., 2016) to finally assign amplicon sequence variants (ASVs) as taxonomic units.
We combined and homogenized the remaining two soil cores to assess soil microbes, placed them in coolers (4 °C) and transported them to the laboratory at WSL. Metagenomic DNA was extracted from 8 g sieved soil (2 mm) using the DNAeasy PowerMax Soil Kit (Qiagen, Hilden, Germany) according to the manufacturer´s protocol. PCR amplification of the V3-V4 region of the small-subunit (16S) of prokaryotes (i.e., bacteria and archaea) and the ribosomal internal transcribed spacer region (ITS2) of fungi was performed with 1 ng of template DNA using PCR primers and conditions as previously described (Frey et al., 2016). PCRs were run in triplicates, pooled and sent to the Genome Quebec Innovation Centre (Montreal, QC, Canada) for barcoding using the Fluidigm Access Array technology (Fluidigm) and paired-end sequencing on the Illumina MiSeq v3 platform (Illumina Inc., San Diego, USA). Quality filtering, clustering into operational taxonomic units (OTUs, 97% similarity cutoffs) and taxonomic assignment were performed as previously described (Resch et al., 2021).Taxonomic classification of nematode, prokaryotic and fungal sequences was conducted querying against the most recent versions of PR2 (v.4.11.1; Guillou et al., 2013), SILVA (v.132; Quast et al., 2013), and UNITE (v.8; Nilsson et al., 2019) reference sequence databases. Taxonomic assignment cutoffs were set to confidence rankings ≥ 0.8 (below ranked as unclassified). Prokaryotic OTUs assigned to mitochondria or chloroplasts as well as OTUs or ASVs assigned to other than Fungi or Nematoda were manually removed prior to data analysis. The three datasets were filtered to discard singletons and doubletons. Taxonomic abundance matrices were rarefied to the lowest number of sequences per community to achieve parity of the total number of reads between samples (Prokaryotes: 10,929 reads; Fungi: 18,337 reads; Nematodes: 6,662 reads). We calculated Shannon diversity and assessed community structures for soil nematodes, prokaryotes and fungi based on their relative abundances of ASV or OTU at the taxon level.

Collection of soil physical and chemical properties
We randomly collected one undisturbed soil core (5 cm diameter, 12 cm depth) per 4-m2 subplot using a steel cylinder that fit into the soil corer. The cylinders were capped to avoid disturbance during transport and used to measure field capacity, rock content and fine earth density as previously described (Resch et al., 2021). We randomly collected another three soil cores (5 cm diameter, 12 cm depths) in each 4-m2 subplot to determine soil chemical properties. The cores were pooled, dried at 60 °C for 48 h and passed through a 2 mm sieve. We measured soil pH (CaCl2) on dried samples, total nitrogen (N) and organic carbon (C) concentration on dried and fine-ground samples (≤ 0.5 mm; for details see Resch et al., 2021). We calculated total N and organic C pools after correcting its concentration for soil depth, rock content and fine earth density.

bacteria

display_name: bacteria

biodiversity

display_name: biodiversity

fungi

display_name: fungi

grassland

display_name: grassland

nematodes

display_name: nematodes

plants

display_name: plants

restoration

display_name: restoration

soil

display_name: soil

soil-biodiversity

display_name: soil-biodiversity

soil-biology

display_name: soil-biology

soil-chemistry

display_name: soil-chemistry

topsoil-removal

display_name: topsoil-removal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Long-term recovery of above-and belowground interactions in restored grasslands


backward-trajectories

maintainer: Michael Sprenger

title_for_slug: backward-trajectories

en: alps atmospheric-dynamics complex-topopgraphy raclets backward-trajectories cosmo lagrangian-analysis

en: Backward Trajectories

en: The trajectories are started from surface up to 5000 m altitude, with an equidistant vertical spacing of 200 m, and calculated 120 h backward in time. As long as the trajectories stay in the COSMO1 domain (essentially the Alpine region), as run operationally at MeteoSwiss, the COSMO analysis wind fields are used. When the trajectories leave this domain, they are extended further backward in time based on ECMWF analysis data. The following fields are traced along the trajectories: longitude, latitude, geopotential height, pressure, specific humidity, temperature and surface topography. Furthermore, it is indicated for each trajectory time instance on which model data, COSMO or ECMWF, the trajectory time is based. Finally, the trajectories are started every hour in the specified time period, and positions and fields are available every 10 min. Each day is saved as a separate file. The last 8 digits of the file names indicate the starting date of the trajectories.

en: Backward trajectories were calculated from two positions: Davos Wolfgang (LON: 9.85361, LAT: 46.83551) and Weissfluhjoch (LON: 9.80646 LAT: 46.83304) for the time period February 2 until March 27 2019 using COSMO or ECMWF, respectively.

alps

display_name: alps

atmospheric-dynamics

display_name: atmospheric-dynamics

backward-trajectories

display_name: backward-trajectories

complex-topopgraphy

display_name: complex-topopgraphy

cosmo

display_name: cosmo

lagrangian-analysis

display_name: lagrangian-analysis

raclets

display_name: raclets

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Backward  Trajectories


maintainer: Esther Frei

en: treeline mountain-forest stillberg afforestation long-term-experiment

mimetype: application/x-zip-compressed

en:
 Background information

The Stillberg ecological treeline research site in the Swiss Alps was established in 1975, with the aim to develop ecologically, technically, and economically sustainable reforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Long-term monitoring of the large-scale high-elevation afforestation has generated data about tree growth, survival, and vitality. In addition, detailed characteristics of the microsite conditions of the research were conducted. Besides providing a scientific basis and practical guidelines for high-elevation afforestation, this research has contributed to a comprehensive understanding of ecological processes in the treeline ecotone.

 Experiment description

The Stillberg afforestation experiment was established in 1975 by planting 92,000 seedlings of *Larix decidua*, *Pinus cembra* and *Pinus mugo* ssp. *uncinata* in the alpine treeline ecotone. The afforestation site is located on a northeast-facing slope with steep, topographically highly structured terrain and covers elevations from 2075 to 2230 m a.s.l. The afforestation site was divided into 4052 square plots of 3.5 × 3.5 m, arranged in a regular species-alternating pattern over the whole area. Each plot contained 25 trees of one species (1350 plots per species), and the seedlings were systematically planted 70 cm apart. The trees have been monitored since 1975. Specifically, tree mortality was assessed annually from 1975 until 1995 and has been documented every ten years since then, with surveys in 2005 and 2015 (the next survey is due in 2025). Height of the surviving trees was measured in 1975, 1979, 1982, 1985, 1990, 1995, 2005, and 2015. In 1995, 2005, and 2015, drivers of tree vitality were assessed for a subset of trees per plot. Additionally, an extensive set of environmental parameters characterizing microsite conditions of the afforestation area were recorded before and after the planting of the trees.

 Data description

The five datasets from the afforestation experiment comprise ecological and environmental data from the main afforestation experiment in five datasets with accompanying metadata (Stillberg_afforestation_all_metadata.xlsx). All data and metadata files are bundled in a ZIP-file (Stillberg_afforestation_v1.zip). In particular, a first dataset contains environmental data characterising microsite conditions of the 4000 plots with regard to soil, topography, vegetation and microclimatic conditions (Stillberg_afforestation_plot_data_v1.csv; Stillberg_afforestation_plot_metadata_v1.csv. In each plot, the natural tree regeneration was assessed by counting seedings of several tree species in 2005 and 2015 (Stillberg_afforestation_regeneration_data_v1.csv; Stillberg_afforestation_regeneration_metadata_v1.csv). Furthermore, specific information about each of the 92’000 planted trees of the tree species is available (Stillberg_afforestation_tree_parameter_data_v1.csv; Stillberg_afforestation_tree_parameter_metadata_v1.csv). Survival data for each of the 92’000 individual trees can be found in a separate dataset (Stillberg_afforestation_tree_survival_data_v1.csv; Stillberg_afforestation_tree_survival_metadata_v1.csv). Tree growth and vitality parameters are available for all trees from 1995, and for subsets of trees for 2005 and 2015 (Stillberg_afforestation_tree_measurements_data_v1.csv; Stillberg_afforestation_tree_measurements_metadata_v1.csv).

afforestation

display_name: afforestation

long-term-experiment

display_name: long-term-experiment

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline

display_name: treeline

en: Long-term afforestation experiment at the Alpine treeline site Stillberg, Switzerland


en: remote-sensing switzerland raster-processing sentinel-2 force

en: An example of the index EVI for one of the generated 30 by 30 km tiles located around the city of Zürich. The values are multiplied by 10.000. The date of the image is 24.07.2018.

en: Parameter file that defined all the parameters for processing the Sentinel-2 Level 2 imagery

format: OCTET

en:
We processed Sentinel-2 images from 2017 to 2023 for Switzerland with the Software FORCE (Frantz 2019). The respective parameter files can be found here: [Github](https://github.com/TLKoch/Sentinel-2_CH). All the images consist of several TB and therefore, access will be granted upon request.
The available bands (in spatial reference system EPSG 3035) are the following:
*Red, Green, Blue, NIR, Red-Edge-1, Red-Edge-2, Red-Edge-3, SWIR-1, SWIR-2*
The available indices (in spatial reference system EPSG 3035) are the following:
*CCI, CIRE, NDWI/NDMI, NDVI, EVI*
Further indices might be provided upon request.

 Processing
After downloading Level 1 data for the 14 Sentinel-2 tiles covering Switzerland (T31TGN, T32TLT, T32TMT, T32UMU, T32TNT, T32TPT, T31TGM, T32TLS, T32TMS, T32TNS, T32TPS, T32TLR, T32TMR, T32TNR) with an estimated cloud cover of less than 80 \%, we processed the data further with FORCE v. 3.7.8-12.
FORCE was used for radiometric correction, including atmospheric and topographic corrections using the digital elevation model from Copernicus Land Monitoring Service (EU-DEM v. 1.1), with a 25 m spatial resolution, a bidirectional reflectance distribution function (BRDF) correction, and an adjacency effect correction. For cloud masking, the improved Fmask algorithm with buffers of 300 m for clouds, 90 m for shadows, and 30 m for snow were used (Frantz et al. 2018; Zhu et al. 2015). All bands were resampled using cubic convolution to 10 m spatial resolution. Shadows, low and poor illumination as well as saturation were masked out. The co-registration of all images was made with monthly composites of near-infrared Landsat Collection 2 images from 2014 to 2021 (Rengarajan et al. 2020;Rufin et al. 2021). With this the geometric consistency improved. The processed images are available in tiles of 30 by 30 km.

 Example images
Uploaded is an example of the index EVI for one of the generated 30 by 30 km tiles located around the city of Zürich. The values are multiplied by 10.000. The date of the image is 24.07.2018.

force

display_name: force

raster-processing

display_name: raster-processing

remote-sensing

display_name: remote-sensing

switzerland

display_name: switzerland

en: Sentinel-2 imagery of Switzerland


maintainer: Ueli Reber

en: policy-analysis text-corpus environmental--policy biodiversity switzerland bgb policy-documents

en: Replication files

en:
 Introduction

The ZIP file contains all data and code to replicate the analyses reported in the following paper.

Reber, U., Fischer, M., Ingold, K., Kienast, F., Hersperger, A. M., Grütter, R., & Benz, R. (2022). Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics. *Policy Sciences*. [https://doi.org/10.1007/s11077-022-09456-4](https://doi.org/10.1007/s11077-022-09456-4)

If you use any of the material included in this repository, please refer to the paper. If you use (parts of) the text corpus, please also refer to the sources used for its compilation listed below. The content of the texts may not be changed.

 Data folder

The data folder contains the following files.

* _corpus.parquet_: Text corpus of Swiss policy documents
* _dict_de.csv_: Biodiversity dictionary (German)
* _dict_fr.csv_: Biodiversity dictionary (French)
* _dict_it.csv_: Biodiversity dictionary (Italian)
* _topic_labels.csv_: labels/codes for policy sectors
* _topics.csv_: labels/codes for policy sectors

The corpus and the dictionary were compiled by the authors specifically for this project. The labels/codes for policy sectors are based on the [coding scheme](http://ws-old.parlament.ch/affairs/topics) of the Swiss Parliament.

 Text corpus

The text corpus consists of 439,984 Swiss policy documents in German, French, and Italian from 1999 to 2018. The corpus was compiled from the following source between 2020-10-01 and 2021-01-31.

* Transcripts and parliamentary businesses (e.g. questions, motions, parliamentary initiatives) via the [Web Services (WS)](https://www.parlament.ch/de/%C3%BCber-das-parlament/fakten-und-zahlen/open-data-web-services) provided by the Swiss Parliament
* The official compilation of federal legislation ("Amtliche Sammlung", AS) via [opendata.swiss](https://opendata.swiss/de/dataset/official-compilation-of-federal-legislation-bs-as-1947-2018) provided by the Swiss Federal Archives (SFA)
* The federal gazette ("Bundesblatt") via [fedlex.admin.ch](https://www.fedlex.admin.ch/de/fga/index)
* Decisions of federal courts via [entscheidsuche.ch (ES)](https://entscheidsuche.ch/)

The corpus is stored in a single data frame to use with R saved as [PARQUET](https://parquet.apache.org/) file (corpus.parquet). The data frame has the following structure.

* _text_id_: Unique identifier for each text (source information as prefix, e.g. "t_")
* _doc_type_: Document type (see coding scheme below)
* _branch_: Government branche (1 legislative, 2 executive, 3 judicative)
* _stage_: Stage of policy process (1 drafting, 2 introduction, 3 interpretation)
* _year_: Year of publication
* _topic_: Policy sector (coding scheme in separate file in data folder)
* _lang_: Language (de, fr, it)
* _text_: Text

The following list contains the coding scheme for the doc_type variable.

* 101: Federal gazette // Draft for public consultation ("Vernehmlassungsverfahren")
* 102: Federal gazette // Explanation of draft for parliament ("Botschaft")
* 103: Federal gazette // Strategy, action plan
* 104: Federal gazette // Federal council decree ("Bundesratsbeschluss")
* 105: Federal gazette // (Simple) Federal decree ("(Einfacher) Bundesbeschluss")
* 106: Federal gazette // General decree ("Allgemeinverfügung")
* 107: Federal gazette // Treaty ("Übereinkommen")
* 108: Federal gazette // Treaty ("Abkommen")
* 109: Federal gazette // Draft for parliament ("Entwurf")
* 110: Federal gazette // Report ("Bericht")
* 111: Federal gazette // Report of parliamentary comission ("Bericht")
* 112: Federal gazette // Report of federal council ("Bericht")
* 201: Parl. businesses // Submitted text
* 202: Parl. businesses // Reason text
* 203: Parl. businesses // Federal council response
* 204: Parl. businesses // Initial situation
* 205: Parl. businesses // Proceedings
* 301: Parl. transcripts // Speech of MP
* 302: Parl. transcripts // Speech of federal council
* 401: Federal legislation // Legal text of the official compilation (law, ordinances, etc.)
* 501: Court decisions // Federal Supreme Court
* 502: Court decisions // Federal Criminal Court
* 503: Court decisions // Federal Administrative Court

 Code folder

The code folder contains all R code for the analyses. The files are numbered chronologically.

* _1_classifier_training.R_: Training of classifiers for classification of policy sectors
* _2_classifier_application.R_: Classification of documents in corpus
* _3_dictionary_application.R_: Biodiversity indexing of documents in corpus
* _4_stm_truncation.R_: Truncation of indexed documents to keep only relevant parts
* _5_stm_translation.R_: Translation of FR and IT documents to DE
* _6_stm_model.R_: Preprocesssing and structural topic model
* _7_plots.R_: Plots and numbers as included in the paper

The code/functions folder contains custom functions used in the scripts, e.g. to support topic model interpretation.

Package versions and setup details are noted in the code files.

 Contact

Please direct any questions to Ueli Reber (ueli.reber@eawag.ch).

bgb

display_name: bgb

biodiversity

display_name: biodiversity

environmental--policy

display_name: environmental--policy

policy-analysis

display_name: policy-analysis

policy-documents

display_name: policy-documents

text-corpus

display_name: text-corpus

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Replication files for "Integrating biodiversity: A longitudinal and cross-sectoral analysis of Swiss politics"


carabid-beetles-in-forests

maintainer: Martin K. Obrist

title_for_slug: carabid-beetles-in-forests

en: running-beetles carabidae coleoptera insects forest arthropoda trapping

en: Data query used on Fauna Database to retrieve the submitted data.

media_type: text/plain

en: Tab-delimited data of the according sql query.

format: TXT

en: SQL query used to extract the data from fauna database.

en: Data extract in TAB-delimted format. First row is header, first column is counter.

en:
Carabidae data from all historic up to the recent projects (21.10.2019) of WSL, collected with various methods in forests of different types.

Version 2 ('FIDO_global_extract 2019-11-22_18-11-24 WSL-Forest-Carabidae') contains additional data field PROJ_FALLENBEZEICHNUNG.

Data are provided on request to contact person against bilateral agreement.

arthropoda

display_name: arthropoda

carabidae

display_name: carabidae

coleoptera

display_name: coleoptera

forest

display_name: forest

insects

display_name: insects

running-beetles

display_name: running-beetles

trapping

display_name: trapping

en: Carabid beetles in forests


maintainer: Lyu

en: species-occurrence species-richness fagales pinales species-range-map species-distribution-model

en: Occurrence maps for species of Fagales and Pinales with few records

en: Point_buffer.zip includes 267 occurrence maps of species that do not have enough occurrence data for polygon mapping.

en: Species range maps of species in Fagales and Pinales (with enough occurrences)

en: species_map.zip includes species 1690 range maps generated based on the integrated method described in Lyu et al., (2022). File names with (polygon) indicate that this map is only generated by polygon mapping, as there are not enough occurrences for SDMs.

en:
This database contains 1957 distribution maps of species from Fagales and Pinales constructed based on a method integrating polygon mapping and SDMs (Lyu et al., 2022).
To construct the maps, we first collected occurrence data from 48 different sources. According to the number of occurrences after data cleaning, three kinds of maps are constructed: (1) For species with more than 20 occurrences, we performed SDM and polygon mapping described in Lyu et al. (2022) and select the integration of the two layers as the distribution range; (2) For species with more than 4 but less than 20 occurrences, we only use polygon mapping to draw the distribution range; (3) For species with less than 4 occurrences, a 20-km buffer was generated around the occurrences as the distribution range. The maps were manually checked and evaluated (see Note S3 and Table S9 in Lyu et al., 2022 for details).

fagales

display_name: fagales

pinales

display_name: pinales

species-distribution-model

display_name: species-distribution-model

species-occurrence

display_name: species-occurrence

species-range-map

display_name: species-range-map

species-richness

display_name: species-richness

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Species distribution maps of Fagales and Pinales (GDPlants)