en: illgraben rainfall surge-waves debris-flow radar

en: Radar-based flow height measurement of debris flow at CD28 at Illgraben. Flow height is derived relative to pre-event channel-bed elevation. Sensor location: 46.309677N, 7.633304E

en: Cumulative rainfall measured at CD1 in the Illgraben catchment. Sensor location: 46.283287N / 7.619689E

en:
This dataset contains measurements from two debris flows recorded in 2024 at the Illgraben debris-flow observatory in Switzerland. The first debris flow was recorded on 15 June 2024 and the second debris flow was recorden on 21 June 2024.

This dataset contains the following reseach data for both:
a) Cummulative rainfall measured at CD1 in the catchment.
b) Radar-based flow height of debris flows measured at CD28.

Abstract
In recent years, the destructive impact of debris flows in alpine regions has become increasingly evident. Surge waves within debris flows increase peak discharge and magnify the hazard potential. Hence, understanding the dynamic complexity of debris flows is crucial to mitigate their risk. In order to capture the dynamic processes involved in the formation and interaction of surge waves, it is necessary to obtain distributed observations in the spatiotemporal domain. In this study, we present near-torrent distributed seismic measurements to monitor the Illgraben channel located in the Swiss Alps. With 33 nodal sensors, we detected and tracked surge waves along a 2-kilometer torrent section across the Illgraben fan, which allowed us to gain valuable new insights into the spatial scales relevant for surge wave formation and their long-distance propagation characteristics. We observed erosion-deposition waves that emerged out of the muddy flow tail and propagated with constant velocity along the torrent, reaching meter-scale flow heights within only 100s of meters of flow distance which significantly impact the hazard potential of debris flows. Our results provide valuable observations of surge waves from their formation to their annihilation. We can differentiate flow regimes based on their seismic signature and track them along the torrent, thus mapping the debris-flow evolution in time and space. The observations elucidate large-scale debris flow dynamics thus improving our understanding of hazard potential and the effectiveness of structural countermeasures.

debris-flow

display_name: debris-flow

illgraben

display_name: illgraben

radar

display_name: radar

rainfall

display_name: rainfall

surge-waves

display_name: surge-waves

en: Debris flow observation at Illgraben 2024: Event Data 15 June / 21 June


vegetation-height-model-nfi

maintainer: Christian Ginzler

title_for_slug: vegetation-height-model-nfi

en: vegetation-height-model photogrammety forest point-cloud 3d

state: active

type: dataset

en: 2022 Vegetation Height Model NFI (2017-2022)

en:
Vegetation Height Model of Switzerland for the year 2022 (cloud optimized geotiff)
and Metadata file with information about acquisition date of used images for tiles of 500 x 500 m (geopackage).

format: SERVICE

en: 2015 Vegetation Height Model NFI (2010-2015)

en:
Vegetation Height Model of Switzerland for the year 2015 (cloud optimized geotiff)
and Metadata file with information about acquisition date of used images for tiles of 500 x 500 m (geopackage).

en: 2016 Vegetation Height Model NFI (2011-2016)

en:
Vegetation Height Model of Switzerland for the year 2016 (cloud optimized geotiff)
and Metadata file with information about acquisition date of used images for tiles of 500 x 500 m (geopackage).

en:
Vegetation Height Model of Switzerland for the year 2021 (cloud optimized geotiff)
and Metadata file with information about acquisition date of used images for tiles of 500 x 500 m (geopackage).

en: 2012 Vegetation Height Model NFI (2007-2012)

en:
Vegetation Height Model of Switzerland for the year 2012 (cloud optimized geotiff)
and Metadata file with information about acquisition date of used images for tiles of 500 x 500 m (geopackage).

en: 2023 Vegetation Height Model NFI (current)

en:
Vegetation Height Model of Switzerland for the year 2023 (cloud optimized geotiff)
and Metadata file with information about acquisition date of used images for tiles of 500 x 500 m (geopackage).

en: 2019 Vegetation Height Model NFI (2013-2019)

en:
Vegetation Height Model of Switzerland for the year 2019 (cloud optimized geotiff)
and Metadata file with information about acquisition date of used images for tiles of 500 x 500 m (geopackage).

en: Thumbnail

mimetype: image/jpeg

en: Countrywide Stereo-Image Matching for Updating Digital Surface Models in the Framework of the Swiss National Forest Inventory

media_type: application/pdf

format: PDF

en: 2020 Vegetation Height Model NFI (2013-2020)

en:
Vegetation Height Model of Switzerland for the year 2020 (cloud optimized geotiff)
and Metadata file with information about acquisition date of used images for tiles of 500 x 500 m (geopackage).

en:
Countrywide **vegetation height models (VHM)** were generated for Switzerland based on **stereo aerial images**, acquired by the Federal Office of Topography swisstopo.
From the ADS-80/100 sensor data, first a digital surface model (DSM) with a spatial resolution of 1 × 1 m is processed. This DSM is then normalized using the digital terrain model (DTM) swissALTI3D (swisstopo). Buildings and other artificial objects are masked out from the nomalized DSM (nDSM) using information from the topogrphic landscape model - TLM (swisstopo) to obtain the actual vegetation height model (VHM).
These VHM's are produced in the framework of the Swiss National forest Inventory (NFI). Each year about 1/6 of Switzerland's surface is updated using the leaf-on aerial images acquired by swisstopo (may - october).
Further information on the creation of the VHM NFI can be found in the paper Ginzler and Hobi (2015, https://doi.org/10.3390/rs70404343).

forest

display_name: forest

photogrammety

display_name: photogrammety

point-cloud

display_name: point-cloud

vegetation-height-model

display_name: vegetation-height-model

educ

fr: Éducation, culture et sport

de: Bildung, Kultur und Sport

en: Education, culture and sport

it: Istruzione, cultura e sport

envidat

fr: EnviDat: le portail de données environnementales

de: EnviDat: das Umwelt-Datenportal

en: EnviDat: the Environmental Data Portal

it: EnviDat: il portale dei dati ambientali

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

political_level: other

wsl

capacity: public

type: organization

approval_status: approved

key: guid

key: uri

value: Envidat Harvester

en: Vegetation Height Model NFI


maintainer: Mathias Bavay

en: dew-point-temperature treeline soil-temperature air-pressure shortwave-radiation wind-speed stillberg air-temperature snow-depth relative-humidity wind-direction precipitation-sum

media_type: application/zip

en: The Davos Stillberg meteorological data (Stillberg_meteo_v2.0.zip) consists of timeseries from five meteorological stations operated at the Stillberg treeline ecological resea...

format: ZIP

en: The Davos Stillberg meteorological data (Stillberg_meteo_v1.1.zip) consists of timeseries from five meteorological stations operated at the Stillberg treeline ecological research site. Metadata are provided in the folder 'Stillberg_meteo_metadata' and the data in the folder 'Stillberg_meteo_data' with subfolders for the three quality levels 'raw_standardized', ‘raw_edited’, and ‘filtered’.

en: The Davos Stillberg meteorological data (Stillberg_meteo_v1.zip) consists of timeseries from five meteorological stations operated at the Stillberg treeline ecological research site. Metadata are provided in the folder 'Stillberg_meteo_metadata' and the data in the folder 'Stillberg_meteo_data' with subfolders for the three quality levels 'raw_standardized', ‘raw_edited’, and ‘filtered’.

en:
 Background information
The Stillberg ecological treeline research site is located in the transition zone between the relatively humid climate of the Northern Alps and the continental climate of the Central Alps. In 1975, 92,000 seedlings of the high-elevation conifer species *Larix decidua* Mill. (European larch), *Pinus cembra* L. (Cembran pine), and *Pinus mugo* ssp. *uncinata* (DC.) Domin (mountain pine) were systematically planted across an area of 5 hectares along an elevation gradient of about 150 metres, with the aim to develop ecologically, technically, and economically sustainable afforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Alongside the ecological long-term monitoring of the afforestation, several meteorological stations have recorded local meteorological conditions at the Stillberg research site. Here, we provide the Davos Stillberg meteorological timeseries of five stations from 1975 (01-01-1975), the year of the afforestation establishment, until the end of the year 2022 (31-12-2022).

 Station description
The five meteorological stations were all installed at the same location (46°46′25.015″N 9°52′01.792″E) at 2090 m a.s.l., in the lower part of the afforestation area. In general, the five stations were operated sequentially (Stillberg_meteo_metadata_stations_v1.csv). However, there are some overlapping time periods when more than one station was operated in parallel. The stations have recorded environmental parameters, such as air and soil temperature, dew point temperature, air pressure, relative humidity, wind direction and velocity, radiation, precipitation, and snow depth (Stillberg_meteo_metadata_parameters_v1.csv). The meteorological measurements were recorded hourly from 1975 until 1996 and have been recorded in 10-minute intervals since 1997.

 Data description
We processed the Davos Stillberg meteorological timeseries with the MeteoIO meteorological data pre-processing library (Bavay & Egger, 2014). Data files are provided for each station and quality level separately and named according to the station (see ‘Stillberg_meteo_metadata_stations_v1.csv’). From the raw data in their original formats, we generated three data quality levels: raw standardized (folder ‘raw_standardized’), edited (folder ‘raw_edited’) and filtered (folder ‘filtered’). The processing level is indicated in the headers of the data files. The whole processing protocol is described in a set of human-readable configuration files that are used by MeteoIO to generate the required data quality levels. This improves long-term reproducibility (Bavay et al., 2022), as the data could be regenerated in the future, even using a completely different software, to account for additional data points or to introduce new data corrections. The first quality level (raw standardized) is generated by parsing the original data files and interpreting them in order to convert all data points to a common format and meteorological parameter naming scheme, while excluding unreadable or duplicated data lines. The generated data files are derivatives of CSV files, with a standardised header that contains the metadata that are necessary to interpret and use the data (use metadata) and to populate a data index (search metadata). The latter is a textual implementation of the Attribute Convention for Data Discovery (ACDD) metadata standard (Attribute Convention for Data Discovery 1-3, 2022). The second quality level (edited) builds on the raw data by performing low-level data editing, such as removing some data periods that are known to be unusable (often based on maintenance records or anecdotal evidence) or applying undocumented calibration factors (for example, when there seems to be an obvious offset on a measured parameter for a period between two documented maintenance operations). The third quality level is generated by applying statistical filters on the data (per station and per meteorological parameter) to exclude presumably wrong values. We did not perform gap filling, as no single strategy could be relied upon that would work best for all possible data usage scenarios.

air-pressure

display_name: air-pressure

air-temperature

display_name: air-temperature

dew-point-temperature

display_name: dew-point-temperature

precipitation-sum

display_name: precipitation-sum

relative-humidity

display_name: relative-humidity

shortwave-radiation

display_name: shortwave-radiation

snow-depth

display_name: snow-depth

soil-temperature

display_name: soil-temperature

stillberg

display_name: stillberg

treeline

display_name: treeline

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed

en: Long-term meteorological station Stillberg, Davos, Switzerland at 2090 m a.s.l.


maintainer: EnviDat Support

en: urban-planning concur land-change urban-landscape landscape-planning

en:
Book of abstracts from the virtual conference "From Plans to Land Change: Dynamics of Urban Regions"

Cities and urban regions are among the most dynamic land-use systems in the world, with dramatic consequences for the provision of ecosystem services and the livelihood of people. Planning is a multifaceted activity with extensive experience in the management of these urbanization processes. However, our understanding of planning’s contribution to shaping urban land use, form and structure is still incomplete, with serious consequences for the efficacy of urban planning and land change models.

This international conference aims to bring together the community of scholars working on planning evaluation and urban modelling. The participants are offered the opportunity to present their current research and to discuss how theoretical developments, data sources, comparative studies and modelling approaches might advance the field.

The conference was financially supported by the CONCUR project and sustained by Swiss Federal Research Institute WSL.

concur

display_name: concur

land-change

display_name: land-change

landscape-planning

display_name: landscape-planning

urban-landscape

display_name: urban-landscape

urban-planning

display_name: urban-planning

en: From Plans to Land Change: Dynamics of Urban Regions. Book of Abstracts


en: dispersal ecology biodiversity reef-fish traits

en: Global coast files from https://www.ngdc.noaa.gov/mgg/shorelines/gshhs.html used in the Figures

mimetype: application/zip

en: Donati et al. main script

en:
Main script used in : Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages"
accepted in Ecography, August 2019

media_type: text/plain

en: Dispersal parameter value d per simulation starting with a minimum dispersal value, where each species is able to colonise each adjacent cell, and ending with the value of d for which all the extant habitats, including the most remote Pacific islands, have been colonised (d ∈ [1.75°: 5.45°]).

format: TXT

mimetype: text/plain

en: Simulated rates of speciation and extinction under a range of dispersal parameters. Net diversification rates are calculated from the difference between speciation and extinction rates. This data allows the creation of Figure A4 in Supporting information, Appendix 1.

en: Global simulated distribution of species under a range of dispersal parameter values

en:
Global distribution of simulated species richness under a range of dispersal parameter values d
d ∈ [1.75°: 5.45°].

en: Functions used in R scripts in: Donati et al. 2019 "A process-based-model supports an association between  # dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019

en: Functions for Figures illustrated in Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019.

en: Tropical reef fish trait data

media_type: text/csv

en:
Species trait (i.e. adult body size, home range mobility behaviour, circadian activity and schooling) data gathered from the General Approach to Species Abundance Relationships (GASPAR) database (Kulbicki et al. 2013, Parravicini et al. 2013).

Kulbicki, M. et al. 2013. Global biogeography of reef shes: a hier- archical quantitative delineation of regions. – PLoS One 8: e81847.

Parravicini, V. et al. 2013. Global patterns and predictors of tropi- cal reef sh species richness. – Ecography 36: 1254–1262.

To complement the trait data with Pelagic Larval Duration information refer to the following publication:

Luiz, Osmar J., et al. "Adult and larval traits as determinants of geographic range size among tropical reef fishes." Proceedings of the National Academy of Sciences 110.41 (2013): 16498-16502.

In Donati et al. "A process-based model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography in August 2019, we used the PLD gathered from Luiz et al. 2013 as described in the methods - section "Species trait data".

format: CSV

mimetype: text/csv

en: Main text figures

en: R Script used for figures in main text in: Donati et al. 2019: "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019.

en: Input for the Global distribution maps for proportions of species richness for (a) simulated dispersal parameter value (b) observed dispersal-related traits

en: Geographic distribution data (species richness and proportions of high/low dispersal-related traits) on predominantly low dispersing and high dispersing species expected based on the simulations, and those where low- and high- dispersal related traits values are observed for the five investigated traits.

en: Input for spatial congruence test overlap between proportions of low and high dispersal and observed low- and high- dispersal-related traits in assemblages (30-50% threshold). see Table 2.

en: Coral reef grid cells (shape, dbf, etc. files)

en:
Grid cells of 5 × 5°, corresponding to circa 555 × 555 km at the Equator (see Parravicini et al. 2013, Leprieur et al. 2016)

Parravicini, V. et al. 2013. Global patterns and predictors of tropi- cal reef sh species richness. – Ecography 36: 1254–1262.

Leprieur, F. et al. 2016. Plate tectonics drive tropical reef biodiver- sity dynamics. – Nat. Commun. 7: 11461.

en: Global species distribution of tropical reef fish species

en: Each species corresponds to a "Gaspar_code" gathered from the General Approach to Species Abundance Relationships (GASPAR) database (Kulbicki et al. 2013, Parravicini et al. 2013) and is linked to a specific Fishned ID corresponding to a specific Latitude and Longitude.

en: Supplementary material Appendix 1 Figures illustrated in Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages". accepted in Ecography, August 2019

en:
This dataset contains all data and R codes (R Development Core Team, https://www.R-project.org) used in the following publication: Donati GFA, Parravicini V, Leprieur F, Hagen O, Gaboriau T, Heine C, Kulbicki M, Rolland J, Salamin N, Albouy C, Pellissier L. "A process-based model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted by Ecography in August 2019. When using this data and R scripts the above publication should be cited.

The interaction of habitat dynamics with species dispersal abilities could generate gradients
in species diversity and prevalence of life-history and ecological traits, when the latter are associated with dispersal potential. In this dataset, we use a spatial mechanistic model of speciation, extinction and dispersal, constrained by a dispersal parameter. This model allows to simulate the interplay between reef habitat dynamics over the past 140 million years and dispersal, shaping lineage diversification history and global assemblage composition of over 6000 tropical reef fish species. Global trait distribution data of tropical reef fish are used to evaluate the congruence between simulations and observations.

biodiversity

display_name: biodiversity

dispersal

display_name: dispersal

ecology

display_name: ecology

reef-fish

display_name: reef-fish

traits

display_name: traits

en: Simulated and observed prevalence of dispersal-related traits in tropical reef fish assemblages worldwide


en: snow avalanche avalanche-forecast snow-stability-evaluation snowpack

en: SNOWPACK simulations

en: This dataset contains all SNOWPACK simulations, including input files, setup and output files.

en: Manually observed snow profiles

en: Manually observed snow profiles as csv-files containing depth [cm], thickness [cm], density [kg m-3], hand hardness, first grain type, second grain type, first grain size [mm], and second grain size [mm] of each layer.

en: Stability tests

en: Stability tests including csv-files with CT, ECT and PST experiments for each year and each field site.

en: Extracted data

en: Extracted data contain validation and results published in Richter et al. (2019).

en: README

en: README file explaining data structure and content

en:
To validate the critical crack length as implemented in the snow cover model SNOWPACK, PST experiments were conducted for three winter seasons (2015-2017) at two field site above Davos, Switzerland. This dataset contains manually observed snow profiles and stability tests. Furthermore, corresponding SNOWPACK simulations are included.
These data were analyzed and results were published in Richter et al. (2019).

Please refer to the Readme file for further details on the data.

These data are the basis of the following publication:
Richter, B., Schweizer, J., Rotach, M. W., and van Herwijnen, A.: Validating modeled critical crack length for crack propagation in the snow cover model SNOWPACK, The Cryosphere, 13, 3353–3366, https://doi.org/10.5194/tc-13-3353-2019, 2019.

avalanche

display_name: avalanche

avalanche-forecast

display_name: avalanche-forecast

snow

display_name: snow

snow-stability-evaluation

display_name: snow-stability-evaluation

snowpack

display_name: snowpack

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Validating and improving the critical crack length in SNOWPACK


maintainer: Christoph Marty

en: water-cycle hydrology climate-change-impacts snowfall snow

en: Synthesis report chapter

mimetype: application/pdf

en: DORA Persistent URL

en:
This report was prepared as one of the synthesis report chapters of the Hydro-CH2018 project of the Federal Office for the Environment (FOEN). An important feature of snow cover is the fact that its volume and duration is subject to large year-to-year fluctuations. As frozen precipitation, snow cover is nothing other than a natural water reservoir that delays precipitation to runoff and is thus of outstanding importance for the seasonal water balance in Switzerland. Over a whole year, approximately 40% (22 km3) of the annual runoff currently comes from snow melting and only 1% from glacier melting. Typically, the snow cover in the Alpine region builds up over the autumn and winter months, reaches its maximum between February and May, depending on the altitude, and dominates the runoff processes during melting in the following spring and summer months.
Due to the great dependence on minus temperatures and precipitation, the snow cover reacts sensitively to temperatures above 0° Celsius and more or less precipitation. Due to climate change and the associated warming, the proportion of precipitation that falls as snow decreases measurably. In addition to this reduction in snowfall, the warmer temperatures also cause the snow cover to melt more quickly. The decline in snowfall has so far mainly affected lower altitudes, where winter temperatures often reach positive levels.
As climate change progresses, this trend is likely to continue and above all affect higher zones. Even at higher altitudes, the snow cover will then start later, melt away earlier and is increasingly no longer permanently present. This development will also have an effect on the water bodies. Today nival regimes, i.e. regimes shaped by snow, are shifting towards pluvial regimes, i.e. regimes dominated by rain. Overall, winter runoff increases, summer runoff decreases. By the end of the century, the proportion of runoff from snowmelt will decrease throughout Switzerland, albeit to a lesser extent than the proportion from glacier melt.

climate-change-impacts

display_name: climate-change-impacts

hydrology

display_name: hydrology

snowfall

display_name: snowfall

water-cycle

display_name: water-cycle

en: Snow and the water cycle in a changing climate


disdrometer-data-laret

maintainer: Daniel Wolfensberger

title_for_slug: disdrometer-data-laret

en: visibility hydrometeors precipitation disdrometer raclets

en: Disdrometer Data Laret

en: The zip folder contains one netCDF file per day for Laret from February 7 to March 29 2019 with a temporal resolution of 30 seconds (time in UTC). The naming convention for the files is Laret_YYYYMMDD.nc and the files include the following: characteristics of hydrometeors (e.g. diameter, fall velocity, amount per diameter class,...), precipitation rate, radar reflectivity, visibility range, weather codes and instrument performance.

en:
A laser optical disdrometer (Parsivel² , OTT Hydromet) was used to measure hydrometeors by extinction when passing a laser beam. The instrument can classify eight different kinds of precipitation, including rain, hail, snow, drizzle, and hybrid forms.
The dataset contains information on precipitation amount and type for the period of February 7 to March 29 2019 in Laret.

disdrometer

display_name: disdrometer

hydrometeors

display_name: hydrometeors

precipitation

display_name: precipitation

raclets

display_name: raclets

visibility

display_name: visibility


en: dry-snow-avalanche climate-projections wet-snow-avalanche avalanche climate-change snow-stratigraphy snow-instability snow

en: SNOWPACK settings

en: contains .ini and .sno file indicating the settings used to drive SNOWPACK with the climate scenarios

en: Projections of avalanche activity

en: contains one file per IMIS station that indicates the daily probability for the occurrence of dry- or wet-snow avalanches in the vicinity of the respective station for each day during the time period 1.12.1981-31.05.2099 (months December to May) and all climate model chains and RCP scenarios.

en: Climate scenarios .smet

en: contains one .smet file per combination of station, climate model chain and RCP scenario. Each .smet file contains the downscaled meteorological data (time span 1.9.1981-31.8.2099) that was used to drive the SNOWPACK simulations.

en:
This data set includes 21st century projections of dry- and wet-snow avalanche activity for seven sites in the Swiss Alps as well as the downscaled climate scenarios and SNOWPACK configuration files used to produce these projections. The methods used to produce these data are described in the research article:
Mayer, S., Hendrick, M., Michel, A., Richter, B., Schweizer, J., Wernli, H., and van Herwijnen, A.: Changes in snow avalanche activity in response to climate warming in the Swiss Alps, EGUsphere, 2024, 1-32, https://doi.org/10.5194/egusphere-2024-1026, 2024.
We used downscaled climate projections to drive the snow cover model SNOWPACK and evaluated future dry- and wet-snow avalanche occurrences in the vicinity of seven automatic weather stations from the IMIS network using machine learning models trained with observed records of avalanche activity. Projections are available for three different emission scenarios (Representative Concentration Pathways, RCP2.6, RCP4.5 and RCP8.5) and eight climate model chains from the CH2018 ensemble. The output of the model chain is given by a daily probability for dry- or wet-snow avalanche occurrences. These probabilities can then be used to classify a day as a dry- and wet-snow avalanche day (AvD) or non-avalanche day.

climate-change

display_name: climate-change

climate-projections

display_name: climate-projections

dry-snow-avalanche

display_name: dry-snow-avalanche

snow-instability

display_name: snow-instability

snow-stratigraphy

display_name: snow-stratigraphy

wet-snow-avalanche

display_name: wet-snow-avalanche


maintainer: Jokin Idoate-Lacasia

en: forest-reserves forest-inventory environmental-gradients biomass-dynamics carbon-storage

format: OCTET

en: Climatic space covered by the Swiss National Forest Inventory (NFI) that will be used in Figure 5.

en: R markdown document used to download the data files, reproduce the analysis and plot generation.

en:
This dataset documents the analyses and the plot generation for the manuscript **Long-term biomass dynamics in temperate forests in Europe after cessation of management**.
We analyse biomass development in an extensive network of 224 plots in 37 natural forest reserves (NFR) covering a wide environmental gradient with mean annual temperatures ranging from 1 to 10.4 °C and mean annual precipitation ranging from 901 to 2317 mm. Forest inventories have been conducted approximately every 10 years during the last 60 years.
It consists of the following files:
+ **Long_term_biomass_script.Rmd**: R markdown document to reproduce the analysis and the plot generation.
+ **dat_biomass.RDS**: Biomass values for each permanent plot at each inventory. This dataset is used for data exploration and for the Biomass model, and to create Figure 2 and Figure 3.
+ **dat_biomass_change.RDS**: Biomass change values between inventories for each permanent plot. It includes the explanatory variables as well. This dataset is used for the Biomass change model and to create Figure 4 and Figure 5.
+ **NFI_climspace_netCDF.RDS**: Climatic space covered by the Swiss National Forest Inventory (NFI) that is used in Figure 5.

biomass-dynamics

display_name: biomass-dynamics

carbon-storage

display_name: carbon-storage

environmental-gradients

display_name: environmental-gradients

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Long-term biomass dynamics of temperate forests in Europe after cessation of management


maintainer: Alexandre Buttler

en: transplantation-experiment biogeochemisty silvopastoral-systems climate-change soil

en: Dataset

en: Zip archive of all datasets detailed in study.

en:
Silvopastoral systems are highly productive and combine long-term wood production with annual provision of forage for livestock. In the Swiss Jura Mountains these systems are a key component of the landscape. As in other cold biomes, climate change can potentially accelerate landscape change within these historically sustainable systems.

In order to anticipate the evolution of subalpine wooded pasture ecosystems under future climate and land-use changes, this project focused on the interplay between soil, vegetation and climate. It was aimed at providing experimental evidence for chief ecosystem processes, with emphasis on the quality of the ecosystem services provided. The main interest was placed on vegetation turf resistance to climate change along an unwooded – sparsely wooded - densely wooded pasture gradient (land-use intensity), where plant productivity, diversity and succession along with rates of carbon cycling and microbial activity provided measures of ecosystem functioning at both plot and landscape level.

Experimental transplantation of monolith soil turfs to lower altitudes allowed to simulate soil warming and reduced annual precipitation. In order to simulate a year-round warmer and drier climate the natural climate variation along an altitudinal gradient was used as a proxy. The aim was to simulate realistic climate change scenarios for the second half of the 21st century predicted by the IPCC report and downscaled for Switzerland providing regionalized interpolated projections integrating therein trends for temperature increase and precipitation decrease. By using permanent meteorological stations within the network of the Federal Office of Meteorology and Climatology (MeteoSwiss), we obtained high resolution regional data on the variation of mean annual temperature (MAT) and mean annual precipitation (MAP) in relation to altitude in the Swiss Jura Mountains. We observed a general increase of +0.5 K in MAT and a decrease of -20 % MAP for each 100 m decrease in altitude along the SE slope of the Swiss Jura Mountains. These relationships served for the selection of the transplantation sites such that in comparison to a control site at 1350 m a.s.l. (Combe des Amburnex, N 46°54’, E 6°23’) a +2 K MAT and -20 % MAP was achieved at 1010 m a.s.l. (Saint-George, N 46°52’, E 6°26’), a +4 K MAT and -40 % MAP at 570 m a.s.l., (Arboretum d’Aubonne, N 46°51’, E 6°37’), and a +5 K MAT and -50 % MAP at 395 m a.s.l. (Les Bois Chamblard, N 46°47’, E 6°41’). The two stations at 1010 m a.s.l. and 570 m a.s.l. corresponded to the IPCC scenario A1B for a moderate increase in greenhouse gas emissions and to scenario A2 for a high increase in greenhouse gas emissions, respectively. The station at 395 m a.s.l. was chosen to represent an extreme scenario with climate variables lying at the positive tail distribution of model predictions under the A2 scenario.

Soil cores were assembled into rectangular PVC boxes of 60  80 cm2 size and of 35 cm height. All mesocosms were dug down to surface level into previously prepared trenches in the ground thus preventing lateral heat exchange with the atmosphere. Since at each site the mesocosms were placed in a common garden with no light interception, mesocosms with turfs from the two wooded pastures were shaded from direct sun light to simulate the natural light conditions in the corresponding habitats. Each mesocosm was equipped with a drainage system and was connected to a water tank thus representing a zero potential lysimeter collecting soil solution and precipitation/snowmelt runoff. ECH2O EC-TM sensor probes coupled to Em50 data-loggers (Decagon Devices, Inc., USA) recorded soil temperature and volumetric water content in each mesocosm at the top-soil (0 to -3 cm) every minute and data were averaged over one hour intervals. Climate parameters at each transplantation site were monitored continuously throughout the experiment by means of automated weather stations (Sensor Scope Sàrl, Switzerland), measuring rain precipitation (non-heated tipping bucket gauges) and air temperature and humidity 2 m above the ground surface at one minute intervals.

A list of above- and belowground variables were measured to assess the resilience of biogeochemical processes, plant productivity, tree regeneration, and carbon sequestration for each respective land-use practice. Furthermore, the experimental data were used to improve on (parameterization) the existing spatially explicit, dynamic model WoodPaM and refine the modelʼs climatic and land-use variables so that different scenarios of climate change and land use change could be simulated. Natural and management induced disturbance patterns were incorporated into the model.
The data have been made available within the project CCES Mounted. The climate stations Sensorscope are still in use within the project CLIMARBRE (Wald und Klimawandel, WSL/BAFU).

#References

1. Puissant, J., Cécillon, L., Mills, R.T.E., Robroek, B.J.M. Gavazov, K., De Danieli, S., Spiegelberger, T., Buttler, A., Brun, J.J. 2015. Seasonal influence of climate manipulation on microbial community structure and function in mountain soils. Soil Biology and Biochemistry 80: 296–305.
2. Mills, R., K. Gavazov, T. Spiegelberger, D. Johnson and A. Buttler 2014. Diminished soil functions occur under simulated climate change in a sup-alpine pasture, but heterotrophic temperature sensitivity indicates microbial resilience. Science of the Total Environment, vol. 473–474(0): 465-472.
3. Gavazov, K., Spiegelberger, T. and Buttler, A. 2014. Transplantation of subalpine wood-pasture turfs along a natural climatic gradient reveals lower resistance of unwooded pastures to climate change compared to wooded ones. Oecologia (174) : 1425-1435.
4. Peringer A., Siehoff S., Chételat J., Spiegelberger T., Buttler A. & Gillet F. 2013. Past and future landscape dynamics in pasture-woodlands of the Swiss Jura Mountains under climate change. Ecology and Society, 18, 3: 11. DOI: 10.5751/ES-05600-180311. [online] URL: http://www.ecologyandsociety.org/vol18/iss3/art11/
5. Gavazov, K. S., A. Peringer, A. Buttler, F. Gillet and T. Spiegelberger. 2013. Dynamics of Forage Production in Pasture-woodlands of the Swiss Jura Mountains under Projected Climate Change Scenarios. Ecology and Society 18 (1): 38. [online] URL: http://www.ecologyandsociety.org/vol18/iss1/art38/

biogeochemisty

display_name: biogeochemisty

silvopastoral-systems

display_name: silvopastoral-systems

soil

display_name: soil

transplantation-experiment

display_name: transplantation-experiment

en: Biogeochemical data from a transplantation experiment of monolith soil turfs along an altitudinal gradient to simulate climate change scenarios


maintainer: Sofia Pagliarin

en: imperviousness barcelona soil-sealing urban-atlas milan copernicus

en: Shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h), see Dataset description

en: Information on data sources

en:
Dataset description

This dataset is a recalculation of the Copernicus 2015 high resolution layer (HRL) of imperviousness density data (IMD) at different spatial/territorial scales for the case studies of Barcelona and Milan. The selected spatial/territorial scales are the following:

 * a)	Barcelona city boundaries
 * b)	Barcelona metropolitan area, Àrea Metropolitana de Barcelona (AMB)
 * c)	Barcelona greater city (Urban Atlas)
 * d)	Barcelona functional urban area (Urban Atlas)
 * e)	Milan city boundaries
 * f)	Milan metropolitan area, Piano Intercomunale Milanese (PIM)
 * g)	Milan greater city (Urban Atlas)
 * h)	Milan functional urban area (Urban Atlas)

In each of the spatial/territorial scales listed above, the number of 20x20mt cells corresponding to each of the 101 values of imperviousness (0-100% soil sealing: 0% means fully non-sealed area; 100% means fully sealed area) is provided, as well as the converted measure into squared kilometres (km2).

 Dataset composition

The dataset is provided in .csv format and is composed of:

_IMD15_BCN_MI_Sources.csv_: Information on data sources

 _IMD15_BCN.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Barcelona:
 * a)	Barcelona city boundaries (label: bcn_city)
 * b)	Barcelona metropolitan area, Àrea metropolitana de Barcelona (AMB) (label: bcn_amb)
 * c)	Barcelona greater city (Urban Atlas) (label: bcn_grc)
 * d)	Barcelona functional urban area (Urban Atlas) (label: bcn_fua)

 _IMD15_MI.csv_: This file refers to the 2015 high resolution layer of imperviousness density (IMD) for the selected territorial/spatial scales in Milan:
 * e)	Milan city boundaries (label: mi_city)
 * f)	Milan metropolitan area, Piano intercomunale milanese (PIM) (label: mi_pim)
 * g)	Milan greater city (Urban Atlas) (label: mi_grc)
 * h)	Milan functional urban area (Urban Atlas) (label: mi_fua)

_IMD15_BCN_MI.mpk_: the shareable project in Esri ArcGIS format including the HRL IMD data in raster format for each of the territorial boundaries as specified in letter a)-h).

Regarding the territorial scale as per letter f), the list of municipalities included in the Milan metropolitan area in 2016 was provided to me in 2016 from a person working at the PIM.

In the IMD15_BCN.csv and IMD15_MI.csv, the following columns are included:

 * Level: the territorial level as defined above (a)-d) for Barcelona and e)-h) for Milan);
 * Value: the 101 values of imperviousness density expressed as a percentage of soil sealing (0-100%: 0% means fully non-sealed area; 100% means fully sealed area);
 * Count: the number of 20x20mt cells corresponding to a certain percentage of soil sealing or imperviousness;
 * Km2: the conversion of the 20x20mt cells into squared kilometres (km2) to facilitate the use of the dataset.

 Further information on the Dataset

This dataset is the result of a combination between different databases of different types and that have been downloaded from different sources. Below, I describe the main steps in data management that resulted in the production of the dataset in an Esri ArcGIS (ArcMap, Version 10.7) project.

 1. The high resolution layer (HRL) of the imperviousness density data (IMD) for 2015 has been downloaded from the official website of Copernicus. At the time of producing the dataset (April/May 2021), the 2018 version of the IMD HRL database was not yet validated, so the 2015 version was chosen instead. The type of this dataset is raster.

 2. For both Barcelona and Milan, shapefiles of their administrative boundaries have been downloaded from official sources, i.e. the ISTAT (Italian National Statistical Institute) and the ICGC (Catalan Institute for Cartography and Geology). These files have been reprojected to match the IMD HRL projection, i.e. ETRS 1989 LAEA.

 3. Urban Atlas (UA) boundaries for the Greater Cities (GRC) and Functional Urban Areas (FUA) of Barcelona and Milan have been checked and reconstructed in Esri ArcGIS from the administrative boundaries files by using a Eurostat correspondence table. This is because at the time of the dataset creation (April/May 2021), the 2018 Urban Atlas shapefiles for these two cities were not fully updated or validated on the Copernicus Urban Atlas website. Therefore, I had to re-create the GRC and FUA boundaries by using the Eurostat correspondence table as an alternative (but still official) data source. The use of the Eurostat correspondence table with the codes and names of municipalities was also useful to detect discrepancies, basically stemming from changes in municipality names and codes and that created inconsistent spatial features. When detected, these discrepancies have been checked with the ISTAT and ICGC offices in charge of producing Urban Atlas data before the final GRC and FUA boundaries were defined.

Steps 2) and 3) were the most time consuming, because they required other tools to be used in Esri ArcGIS, like spatial joins and geoprocessing tools for shapefiles (in particular dissolve and area re-calculator in editing sessions) for each of the spatial/territorial scales as indicated in letters a)-h).

Once the databases for both Barcelona and Milan as described in points 2) and 3) were ready (uploaded in Esri ArcGIS, reprojected and their correctness checked), they have been ‘crossed’ (i.e. clipped) with the IMD HRL as described in point 1) and a specific raster for each territorial level has been calculated. The procedure in Esri ArcGIS was the following:

 * Clipping: Arctoolbox > Data management tools > Raster > Raster Processing > Clip. The ‘input’ file is the HRL IMD raster file as described in point 1) and the ‘output’ file is each of the spatial/territorial files. The option "Use Input Features for Clipping Geometry (optional)” was selected for each of the clipping.
 * Delete and create raster attribute table: Once the clipping has been done, the raster has to be recalculated first through Arctoolbox > Data management tools > Raster > Raster properties > Delete Raster Attribute Table and then through Arctoolbox > Data management tools > Raster > Raster properties > Build Raster Attribute Table; the "overwrite" option has been selected.

 Other tools used for the raster files in Esri ArcGIS have been the spatial analyst tools (in particular, Zonal > Zonal Statistics). As an additional check, the colour scheme of each of the newly created raster for each of the spatial/territorial attributes as per letters a)-h) above has been changed to check the consistency of its overlay with the original HRL IMD file. However, a perfect match between the shapefiles as per letters a)-h) and the raster files could not be achieved since the raster files are composed of 20x20mt cells.

The newly created attribute tables of each of the raster files have been exported and saved as .txt files. These .txt files have then been copied in the excel corresponding to the final published dataset.

barcelona

display_name: barcelona

copernicus

display_name: copernicus

imperviousness

display_name: imperviousness

milan

display_name: milan

soil-sealing

display_name: soil-sealing

urban-atlas

display_name: urban-atlas

en: Soil sealing Barcelona and Milan different territorial levels


weather-station-klosters

maintainer: Maxime Hervo

title_for_slug: weather-station-klosters

en: temperature wind precipitation weather raclets klosters

en: Weather Station Klosters

en: All in one weather station measuring temperature (°C), humidity (%), wind (m s‾ ¹) and precipitation type. The time format is: number of days from January 0, 0000, UTC.

en: A weather station (Lufft WS600) measured meteorological parameters at Klosters (LON: 9.880413, LAT: 46.869019). Detailed information on the specifications can be found [here](https://www.lufft.com/products/compact-weather-sensors-293/ws600-umb-smart-weather-sensor-1832/productAction/outputAsPdf/).

klosters

display_name: klosters

precipitation

display_name: precipitation

raclets

display_name: raclets

temperature

display_name: temperature

weather

display_name: weather

wind

display_name: wind


maintainer: Gesa von Hirschheydt

en: biodiversity observer-error detection-probability sessile-species bayesian-inference detectability swisslichens lichens monitoring occupancy-model cryptogams inter-observer-difference

en: Repository containing the full data, code, README and workflow files.

en:
The available lichen data consists of detection/nondetection data (1/0) of 373 tree-inhabiting (*corticolous*) lichen species from 416 plots surveyed 1-2 times. The lichen data were originally collected for the purpose of the Red List of epiphytic lichen species in Switzerland ([Scheidegger *et al.* 2002](https://www.bafu.admin.ch/bafu/de/home/themen/biodiversitaet/publikationen-studien/publikationen/rote-liste-gefaehrdete-arten-baum-erdbewohnende-flechten.html)), but updated to recent nomenclature for the purpose of this study.
This repository contains all the supporting data and R code for the paper:
von Hirschheydt, G., Kéry, M., Ekman, S., Stofer, S., Dietrich, M., Keller, C., Scheidegger, C. (2024) **Occupancy model reveals limited detectability of lichens in a standardised large-scale monitoring**. *Journal of Vegetation Science*.
Results and figures presented in the manuscript should be reproducible (with small differences in the latter digits due to stochasticity of the MCMC sampler) with the provided data and code.
The downloadable `.zip` folder has the following structure:
* `0_data/`
* `1_code/`
* `2_output/`
* `lichen_detectability.Rproj`
* `README.txt`
* `workflow.html`
- `workflow.Rmd`

The main folder and the three subordinate folders each have their own `README*.txt` file. These describe each available file in detail and should be consulted prior to using the data or running any code. The file `lichen_detectability.Rproj` stores the information about the R project. The user can open the project by clicking/double-clicking on this file which will automatically define the repository as working directory for the R session. If the user does not use RStudio/Posit, they may have to set the working directory manually to the stored location in the R files. The files `workflow.*` guide the user through the analysis (`1_code/*.R`) in the correct order so that they can:
- bundle the cleaned data into a data list readable for JAGS
- fit the multi-species occupancy model to the data and store the output
- assess the goodness-of-fit of the model to the data
- conduct a prior sensitivity analysis with 2 additional sets of priors
- extract the summary statistics reported in the manuscript and supplementary materials
- generate the figures shown in the manuscript and supplementary materials

bayesian-inference

display_name: bayesian-inference

biodiversity

display_name: biodiversity

cryptogams

display_name: cryptogams

detectability

display_name: detectability

detection-probability

display_name: detection-probability

inter-observer-difference

display_name: inter-observer-difference

lichens

display_name: lichens

monitoring

display_name: monitoring

observer-error

display_name: observer-error

occupancy-model

display_name: occupancy-model

sessile-species

display_name: sessile-species

swisslichens

display_name: swisslichens

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: Repeated detection-nondetection data of corticolous lichens from a standardised monitoring across Switzerland


irkis-soil-moisture-measurements-davos

maintainer: Nander Wever

title_for_slug: irkis-soil-moisture-measurements-davos

en: dischma-catchment davos meteorological-measurements soil-moisture meteo-station

en: IRKIS soil moisture data (zip file)

en: Compressed archive (zip) containing soil moisture measurements, as well as meteorological measurements and interpolated meteorological time series.

en:
Meteorological and soil moisture measurements from soil moisture stations installed from October 2010 - October 2013 in the area surrounding Davos, in particular in the Dischma catchment.

There are in total 7 stations: 1202, 1203, 1204, 1205, 222, 333 and SLF2. For each of the stations, there is a:

* vwc_[stn].smet: containing the soil moisture measurements

* station_[stn].smet: in-situ measured meteorlogical parameters. Note, the quality of these measurements for stations 1202, 1203, 1204 and 1205 is very low, with data gaps. Use this data with care. For stations 222, 333 and SLF2, data quality is high and only the default cautiousness should be applied.

* interpolatedmeteo_[stn].smet contains per stations a dataset derived by interpolating from several stations in the Davos area to the stations location. This dataset was generated from the output of the Alpine3D model, of which simulations are presented in the Wever et al. (2017) manuscript.

At the soil moisture measurement sites, Decagon 10HS sensors were installed, at 10, 30, 50, 80 and 120 cm depth. Per depth 2 sensors were installed, labelled A and B in the datafiles. Note that at stations 1203, 1204 and 1205, sensors were only installed at 10, 30 and 50 cm depth.

The files follow the SMET format: https://models.slf.ch/docserver/meteoio/SMET_specifications.pdf and metadata for the stations can be found in the header of the smet files.

Please cite the Wever et al. (2017) reference when using this data in publications.

For a more detailed description, please refer to: Wever, N., Comola, F., Bavay, M., and Lehning, M.: Simulating the influence of snow surface processes on soil moisture dynamics and streamflow generation in an alpine catchment, Hydrol. Earth Syst. Sci., 21, 4053-4071, https://doi.org/10.5194/hess-21-4053-2017, 2017.

davos

display_name: davos

dischma-catchment

display_name: dischma-catchment

meteo-station

display_name: meteo-station

meteorological-measurements

display_name: meteorological-measurements

soil-moisture

display_name: soil-moisture

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: IRKIS Soil moisture measurements Davos


maintainer: Michael Lombardo

en: water transport pore-water soil snow measurements

en: The Hydrus files used for the inverse fitting of the hydraulic conductivity.

en: Descriptions of the nomenclature, Hydrus files, and videos.

en: Videos of the capillary rise experiments

en: Description of the videos

en: This dataset consists of data related to capillary rise experiments performed with neutron radiography. There are 4 videos of capillary rise experiments as well as the files used to perform the inverse fitting with Hydrus. The videos show the upward flow of water in glass columns filled with sand and snow or sand, gravel, and snow. The videos show the 2D evolution of the unitless optical density with time. The Hydrus files were used to fit the parameter values of the Mualem-van Genuchten model. The experiments were performed at the Paul Scherrer Institute (PSI) in Villigen, Switzerland.

measurements

display_name: measurements

pore-water

display_name: pore-water

snow

display_name: snow

soil

display_name: soil

transport

display_name: transport

water

display_name: water

en: Capillary rise rise experiments in snow using neutron radiography


en: sea-ice-elevation sea-ice polar terrestrial-laser-scans tls

en: Data processing documentation

en: Post Processed TLS's

en: Compressed dat files

en:
This dataset comprises of a post-processed set of terrestrial laser scans (TLS’s) of Antarctic sea ice obtained during the Sea Ice Physics and Ecosystem Experiment-2 (SIPEX-2, http://seaice.acecrc.org.au/sipex2012/) in September-November 2012. The post-processing steps include the registration of the individual scans into a single 3-dimensional point cloud, the removal of unwanted noise caused by particles in the air (i.e., snow crystals), and the final generation of surface grids based on the cleaned individual point returns. The final product includes the ‘xyz’ coordinates of the individual point measurements, and gridded surfaces covering study areas of 100m x 100 m, and at resolutions of 0.01 m, 0.1 m, 0.25 m, 0.5 m and 1 m for each of the survey dates. Additionally, subgrid statistics that include the mean elevation, standard deviation, minimum and maximum elevations, range, and number of point returns in each gridcell are generated. The final product is provided in space-delimited text files, with the surface grids provided in Digital Terrain Model (DTM) format ready for visualization in any GIS software.

How to cite:
Please also cite the original publication when using this data set.: Trujillo, E., K. Leonard, T. Maksym, and M. Lehning (2016), Changes in snow distribution and surface topography following a snowstorm on Antarctic sea ice, J. Geophys. Res. Earth Surf., 121, doi:[10.1002/2016JF003893](https://dx.doi.org/10.1002/2016JF003893).

polar

display_name: polar

sea-ice

display_name: sea-ice

sea-ice-elevation

display_name: sea-ice-elevation

terrestrial-laser-scans

display_name: terrestrial-laser-scans

tls

display_name: tls

en: High resolution sea ice surface topography from the SIPEX-2 expedition, East Antarctica, 2012


en: dendroecology network-analysis beech tree-ring fagus-sylvatica dendrochronology

en:
R code to run the model behind the results of the research article "No future growth enhancement expected at the northern edge for European beech due to continued water limitation".
Requires beech_rawtrw.txt.

en:
This dataset contains the raw ring-width and climate data (1952-2020) used in the research article "No future growth enhancement expected at the northern edge for European beech due to continued water limitation".
RW= ring width
Year= Calendar year
CN = core number
ID3= plot identifier
longitude = longitude (°)
latitude = latitude (°)
elevation = elevation (m)
age= estimated age in calendar year
radius= estimated radius in calendar year (mm)
MAT= mean annual temperature (°C)
MAP= mean annual precipitation (mm)
MCWB= mean climatic water balance (P-PET; mm)
amplitude= simple continentality measure (July - January mean maximum temperatures)
MATspline1 and 2, MCWBspline1 and 2, radiusspline4 and 5= natural spline transformed values of MAT, MCWB and radius ns(x,2)
CWD_pMay_Jun= Climatic Water Balance of previous year May to June !!!#please note CWD here is NOT Climatic Water Deficit, this was a labeling error in the creation of the dataset headers
CWD_May_Jun= Climatic Water Balance of current year May to June
Tmax_pMay_Jun= mean monthly maximum temperature of previous year May to June
Tmax_May_Jun= mean monthly maximum temperature of current year May to June
weight = site replication-based weighting input for model
SOM= membership of regional cluster 1-8 based on Supervised Organized Mapping

en: Model output

en: Output of the Mixed-effects model

en: This dataset contains the raw ring-width and climate data (1952-2020), as well as the R code to run the model and the model output used in the research article "No future growth enhancement expected at the northern edge for European beech due to continued water limitation".

beech

display_name: beech

dendrochronology

display_name: dendrochronology

dendroecology

display_name: dendroecology

fagus-sylvatica

display_name: fagus-sylvatica

network-analysis

display_name: network-analysis

tree-ring

display_name: tree-ring

educ

en: Education, culture and sport

envidat

en: EnviDat: the Environmental Data Portal

en: European Beech tree-ring dataset 1952-2020


en: erosion model snow sediment-transport mars

en: Datasets of Figure 4b

en: Datasets of Figure 4a

en: Datasets of Figure 3b

en: Datasets of Figure 2

en: Datasets of Figure 3a

en:
The files contain the datasets used to produce Figures 2, 3, and 4 of the manuscript ([doi: 10.1002/2016GL071822](http://dx.doi.org/10.1002/2016GL071822)).

 Manuscript Abstract:
Despite being the main sediment entrainment mechanism in aeolian transport, granular splash is still poorly understood. We provide a deeper insight into the dynamics of sand and snow ejection with a stochastic model derived from the energy and momentum conservation laws. Our analysis highlights that the ejection regime of uniform sand is inherently different from that of heterogeneous sand. Moreover, we show that cohesive snow presents a mixed ejection regime, statistically controlled either by energy or momentum conservation depending on the impact velocity. The proposed formulation can provide a solid base for granular splash simulations in saltation models, leading to more reliable assessments of aeolian transport on Earth and Mars.

erosion

display_name: erosion

mars

display_name: mars

model

display_name: model

sediment-transport

display_name: sediment-transport

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Energy- and momentum-conserving model of splash entrainment in sand and snow saltation


en: teleo marseille mediterraneaen marine edna fish-composition

en: Data access

en: Please use cyberduck to download for the moment

en:
Description: Fish environmental DNA data set collected in 2023 in the Calanques National Park
The eDNA samples were collected in 2023 in two locations (Moyades, M−FPA and “Impérial du large”, I-LPA), during the winter (January- February) season, with the sampling dates depending on the weather conditions. For the M−FPA, samples were collected between Moyades island and Riou island, while for the I-LPA, they were collected on the south side of the “Impérial du large” island. To account for the existing bathymetry, in the M−FPA the samples were taken at two sampling sites with depths of 20 and 40 m, while in the I-LPA they were taken at two sites with depths of 20 and 80 m.
At each site, in-situ filtration of seawater was performed using a double-head submersible pump (Subspace, Geneva, Switzerland; nominal flow of ca. 1 L/min) strapped to an underwater scooter with 2 VigiDNA 0.20 µm filtration capsules (SPYGEN, le Bourget du Lac, France), along with disposable sterile tubing. The samples were collected along two horizontal transects (up to 400 m in length) during each closed-circuit rebreather dive, enabling the filtration of a water volume of 15 L/filter per depth, as close as possible to the substrate. Two filter replicates were collected by two divers at each sampling site, except in two cases where bad weather conditions or logistical issues meant that only one replicate was sampled.
After the filtration, the remaining seawater was emptied from the capsule back on the boat and replaced by a 80 mL CL1 conservation buffer (SPYGEN, le Bourget du Lac, France). To prevent any contamination, a strict protocol was followed during the entire process, requiring disposable gloves and single-use filtration equipment. Finally, the samples were stored at room temperature. We followed a strict contamination control protocol in both field and laboratory stages. Each water sample processing included the use of disposable gloves and single-use filtration equipment to avoid any risk of contamination. Libraries were prepared with ligation using the MetaFast protocol (Fasteris).
Data content:
	* rawdata/: contains the raw reads for each individual sample. One archive contains the paired-end reads specified by the _R1 or _R2 suffix as well as individually tagged PCR replicates (if available) together with an archive containing all extraction and PCR blank samples of the library. Reads have been demultiplexed using cutadapt but not trimmed, individual demultiplexing tags and primers remain present in the sequences.
	* taxadata/: contains the table with all detected taxonomy for each sample after bioinformatic processing (see Polanco et al. 2020 for details; https://doi.org/10.1002/edn3.140) and associated field metadata.
	* metadata/: contains two metadata files, one related to the data collected in the field for each filter, and the second related to the sequencing process in the lab (including the tag sequence, library name, and marker information for each sample)

edna

display_name: edna

fish-composition

display_name: fish-composition

marine

display_name: marine

marseille

display_name: marseille

mediterraneaen

display_name: mediterraneaen

teleo

display_name: teleo

en: Environmental DNA Marine France Calanques 2023


maintainer: Francesco Comola

en: wind cohesion snow sand sediment saltation

en: Output of the model simulations

en: Model results on granular splash and saltation process of sand and snow particles

en:
The wind-driven saltation of sand and snow shapes dunes and ripples, generates dust emission, and erodes the surface of the Antarctic ice sheet. Here, we use a model based on the discrete element method to simulate grain-flow interactions and study the effect of particle cohesion on saltation dynamics.

The data contains the model output of granular splash simulations and saltation simulations. Granular splash, the main particle entrainment process in saltation, occurs upon impact of saltating particles with the granular bed. We performed Monte Carlo simulations of granular splash for loose sand grains and for cohesive ice grains. The analysis indicate that different values of cohesion have significant effects not on the number of splashed grains, on the ejection velocity, and the rebound velocity.

In our saltation simulations, we trigger particle movement with a single splash event at the inlet section section and let the system evolve until steady state. Our results show that saltation over cohesive surfaces is difficult to initiate but easy to sustain at low wind speed. The occurrence of transport thus depends on the history of the wind speed, a phenomenon known as hysteresis. We also show that saltation over cohesive surfaces presents higher mass fluxes but requires longer distances to saturate, which increases the size of the smallest stable surface ripples. Our model results have implications for large-scale aeolian processes on Earth and Titan, where sand grains are thought to be very cohesive.

cohesion

display_name: cohesion

saltation

display_name: saltation

sand

display_name: sand

sediment

display_name: sediment

snow

display_name: snow

wind

display_name: wind

educ

en: Education, culture and sport

en: Saltation of cohesive granular materials


maintainer: Stephan Zimmermann

en: calcium potassium biogeochemical-cycling fagus-orientalis-lipsky magnesium

en: Concentrations of Ca, Mg, K, and Na in throughfall, litterflow and soil solution of a Hyrcanian forst in Northern Iran

format: XLS

en:
Throughfall, litterflow and soil solution were sampled during one whole year under five Oriental beech trees in a mixed Hyrcanian beech forest. The amounts of Ca2+, Mg2+, K+ and Na+ in these fluxes were calculated based on their concentrations and the sampled volumes, and subsequently compared with the respective fluxes in the rainfall and soil solution of an adjacent forest gap.
In addition six soil profiles, one close to every single tree and one in the forest gap, were analyzed for pH, CaCO3, organic matter and texture.

biogeochemical-cycling

display_name: biogeochemical-cycling

calcium

display_name: calcium

fagus-orientalis-lipsky

display_name: fagus-orientalis-lipsky

magnesium

display_name: magnesium

potassium

display_name: potassium

envidat

en: EnviDat: the Environmental Data Portal

en: Base cation dynamics in an Oriental beech forest


en: landscape-change policy-action visualization scenario climate-change

en: Seeland subtitles FR

en:
Scenarios of landscape change under climate change in the Swiss lowlands.
Trailer in French with subtitles.

en: Entremon subtitles FR

en: Scenarios of landscape change under climate change in the Swiss mountains. Trailer in French with subtitles.

en: Seeland subtitles DE

en:
Scenarios of landscape change under climate change in the Swiss lowlands.
Trailer in German with subtitles.

en: Entremont subtitles DE

en:
Scenarios of landscape change under climate change in the Swiss mountains.
Trailer in German with written subtitles.

en:
Short videos showing scenarios of potential landscape development in a 4°C warmer climate for a Swiss mountain region and a region on the Swiss Plateau. The videos are in German or French with subtitles.
The videos' key message is: Climate change will have an impact on the Swiss landscapes. However, according to the strategy chosen to adapt to climate change, society and politics will also have a strong influence on the future landscapes and the services they will provide. If no action is taken to adapt to climate change today, then society will have to react in a hurry at a later point in time. This can often result in resource-intensive technical solutions. Conversely, if society takes action in an anticipatory way already today, nature-based solutions can be implemented more successfully and humans can benefit more from the landscape services..
These short videos are teasers that should make the viewers curious to visit the panorama pictures (https://viergrad.envidat.ch/).

climate-change

display_name: climate-change

landscape-change

display_name: landscape-change

policy-action

display_name: policy-action

scenario

display_name: scenario

visualization

display_name: visualization

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Teaser videos Swiss landscapes under climate change


en: groundwater stable-isotopes overland-flow alptal studibach rainfall plot soil-water electrical-conductivity topsoil-interflow

en:
This dataset contains stable isotope ratios of oxygen and hydrogen (O-18 and H-2) and electrical conductivity (EC) in overland flow (OF), topsoil interflow (TIF), soil water, groundwater, and rainwater for 12 rainfall events during the snow-free seasons of 2021 and 2022 in the Studibach catchment, Alptal, Switzerland.

Overland flow, topsoil interflow (i.e., lateral flow from the more densely rooted soil layer), soil water, and groundwater were collected at 14 small trenched runoff plots (1 x 3 m) in three subcatchments (C2, C3, C5) of the Studibach catchment. Overland flow was collected from the surface up to 2-5 cm depth and thus includes biomat flow. A trench was used to collect topsoil interflow (up to 60 cm below the surface; see Table 1 in the manuscript for details). Rainwater was collected at two locations in the Studibach catchment (in C3 and C5, respectively). Soil water was collected in between the events from suction lysimeters installed at 12.5 cm and 20 cm below the soil surface in the middle of each plot. Groundwater was collected between events from wells installed near the plots up to the soil-bedrock interface.
The water samples were analysed for the stable isotopes of oxygen and hydrogen (O-18 and H-2) using with a cavity ring-down spectroscope (CRDS; L2140-i or L2130-i, Picarro, Inc., USA) at the Chair of Hydrology at the University of Freiburg, Germany. The isotope ratios are reported in per mil (‰) relative to Vienna Standard Mean Ocean Water.

A more detailed description of the field setup, data collection and preparation can be found in Leuteritz et al. (in press).

The dataset contains in addition to the sample identifier and the site and event identifiers that are used in the publication, also the sample collection date (typically one day after the event) and the coordinates for each plot (coordinate system: WGS84). For the plots for which samples were collected with an automatic sampler (ISCO), the date and time (UTC) of sample collection are given as well.

alptal

display_name: alptal

electrical-conductivity

display_name: electrical-conductivity

groundwater

display_name: groundwater

overland-flow

display_name: overland-flow

plot

display_name: plot

rainfall

display_name: rainfall

soil-water

display_name: soil-water

stable-isotopes

display_name: stable-isotopes

studibach

display_name: studibach

topsoil-interflow

display_name: topsoil-interflow

educ

en: Education, culture and sport

en: Stable water isotopes and EC in overland flow, topsoil interflow, soil water, groundwater, and rainwater for 12 rainfall events in the Studibach catchment, Alptal, Switzerland


en: fem anisotropy microstructure elasticity crystallographic geometrical x-ray-tomography

en:
The study aims to determine the effective elastic properties of snow, firn, and bubbly ice based on microstructural quantities. Anisotropy, one of these quantities (the other being ice volume fraction) in snow and ice, has two types: geometrical and crystallographic, resulting in snow's macroscopic anisotropic elastic behavior. The research focuses on the impact of geometrical anisotropy on potential ice volume fractions in snow and ice. 391 micro-CT images from various locations, including laboratories, the Alps, the Arctic, and Antarctica, were analyzed to achieve this.
 The analysis involved microstructure-based finite element simulations, which inherently consider microstructure and calculate the elasticity tensor. Hashin-Shtrikman bounds were utilized to predict the elastic properties of the microstructure samples. These bounds effectively captured the nonlinear interplay between geometrical anisotropy, captured by the Eshelby tensor and density. HS bounds have the advantage of the correct limiting behavior for low to high-ice volume fractions.
 We derived parameterization for five transversely isotropic elasticity tensor components, requiring only two free parameters. This parameterization was valid for ice volume fractions ranging from 0.06 to 0.93. The analysis employing the Thomsen parameter highlighted the dominance of geometrical anisotropy until an ice volume fraction of 0.7. However, to fully comprehend the elasticity of bubbly ice, a comprehensive approach is necessary to integrate coupled elastic theories that account for both geometrical and crystallographic anisotropy.
This dataset includes a Jupyter notebook with all the necessary functions required to predict the elasticity tensor of snow for the given ice volume fraction and anisotropy. Also, the code contains the least squares optimization function to compute the elasticity tensor for the six components of stress and strain. For example, we consider our dataset to calculate the samples' elasticity tensor and reproduce Fig. 7 from the paper. We take the stress and strain values obtained from load states as input for this example.
Also, a .csv file contains all the microstructural information: ice volume fraction, anisotropy, correlation functions, voxels size, and no. of voxels of the samples and the elasticity tensor obtained from finite element simulations and from present work parameterization.

anisotropy

display_name: anisotropy

crystallographic

display_name: crystallographic

elasticity

display_name: elasticity

fem

display_name: fem

geometrical

display_name: geometrical

microstructure

display_name: microstructure

x-ray-tomography

display_name: x-ray-tomography

envidat

en: EnviDat: the Environmental Data Portal

en: Effective, anisotropic elasticity tensor of snow, firn, and bubbly ice


maintainer: Frank Hagedorn

en: biomass-dynamics plant-community plant-traits climate-change treeline-ecosystems soil-nutrients

en: Data on soils, tree biomass, plant nutrients, rock mineralogy, climate of treeline ecosystems in Khibiny mountains, Kola Penninsula, Russia

en: Data on soil nutrients and charcteristics, tree and understory biomass, foliage nutrients, mineralogy, soil temperature and moisture along an elevation gradient from boreal forest to mountain tundra in teh Khibiny mountains (Kola Penninsula, Russia). Samples were taken along two gradients at 7 elevation level either under tree canopy (tree) and in open areas (open).

biomass-dynamics

display_name: biomass-dynamics

climate-change

display_name: climate-change

plant-community

display_name: plant-community

plant-traits

display_name: plant-traits

soil-nutrients

display_name: soil-nutrients

treeline-ecosystems

display_name: treeline-ecosystems


maintainer: Henning Löwe

en: discrete-element-modelling microstructure snow-mechanics unconfined-compression-experiments spherical-model-snow 3d-ct-images

en: Data Access

en: Data Structure (Python Notebook)

en:
For the investigation of microstructural and mechanical properties of snow unconfined compression experiments and 3D computed tomography (CT) imaging were performed on sintered rounded grain snow and spherical model snow. The spherical model snow was generated to create geometrically simplified, well-defined microstructures for calibration of numerical models, such as discrete element models (DEM) in which the microstructure is represented by spherical particles.
In the experiments, microstructural variation was created by varying the sintering time (contact size) and the density of the ice sphere samples (number of contacts). The 3D CT images allow for a complete reconstruction of the entire experimental sample (cylindrical sample dimension: diameter = 33.6 mm; height = 14 mm).

discrete-element-modelling

display_name: discrete-element-modelling

snow-mechanics

display_name: snow-mechanics

spherical-model-snow

display_name: spherical-model-snow

unconfined-compression-experiments

display_name: unconfined-compression-experiments

en: Unconfined compression experiments and 3D CT images of spherical model snow and RG snow samples


en: gridded-data terrestiral-laserscanning antarctica depth-of-snowfall terrestrial-laser-scans

en: Scan from 21 December 2018, 1 mm resolution

en: Deprecated: Scan from 11 January 2019, 10 cm resolution, version 1

en: This resource is deprecated. It contains erroneous data.

en: Scan from 11 January 2019, 1 mm resolution

en: Scan from 4 January 2019, 1 mm resolution

en: Scan from 11 January 2019, 10 cm resolution, version 2

en: Scan from 27 December 2018, 10 cm resolution

en: Scan from 2 January 2019, 1 mm resolution

en: Scan from 4 January 2019, 10 cm resolution

en: Scan from 27 December 2018, 1 mm resolution

en: Scan from 21 December 2018, 10 cm resolution

en: Scan from 2 January 2019, 10 cm resolution

en:
Surface topography maps (spatial extent: 400 m x 400 m) obtained at approximately 300 m from the top of the Hammarryggen Ice Rise in Dronning Maud Land, East Antarctica, using a Riegl VZ-6000 Terrestrial Laser Scanner (TLS). Scans were obtained on 5 days in the 2018-2019 Austral summer: on December 21 and 27, and January 2, 4 and 11. By using reflectors installed on bamboo poles, scans were registered with respect to the reflectors, such that the difference between two successive scans reveals the spatial patterns of erosion and deposition of snow. On each scan day, we used multiple scan positions to create one combined point cloud. After applying an octree filter on the point cloud, a 3D surface was obtained. For each day, the dataset contains a 1 mm and a 10 cm octree filter resolution file, only including points in a 400 m x 400 m area centered around the scan positions.

Notes:

* All files in the dataset are in the same coordinate system. However, this coordinate system is arbitrary (i.e., not related to any global coordinate system).

* From the installed reflectors, 4 reflectors could be used over the full period. The scan accuracy is generally higher within the area enclosed by the reflectors.

* The scans from January 2 were found to have exhibited small tilt during the scan and are of lesser accuracy.

* By walking along fixed corridors, disturbance of the snow was limited.

antarctica

display_name: antarctica

depth-of-snowfall

display_name: depth-of-snowfall

gridded-data

display_name: gridded-data

terrestiral-laserscanning

display_name: terrestiral-laserscanning

terrestrial-laser-scans

display_name: terrestrial-laser-scans

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Terrestrial laser scans on Hammarryggen Ice Rise, Dronning Maud Land, East Antarctica


maintainer: Felix Gugerli

en: genetic-diversity conservation-genetics melanargia-galathea monitoring genetic-structure

en:
Individual genotypes assessed at six nuclear microsatellite loci (two alleles per locus) for individuals of the butterfly Melanargia galathea (Marbled white) that were collected throughout Switzerland, along the regular grid of the Biodiversity Monitoring (BDM) of Switzerland. For each individual, the sampling site (number) and the genotype are given. Note that due to privacy restrictions, the original geographic coordinates remain disclosed. For original coordinates, data holders should be contacted (Swiss Federal Office for the Environment; Biodiversity Monitoring Switzerland).
The data refer to the following publication: Terzer et al., Distinct spatial patterns of genetic structure and diversity in the butterfly Marbled White (Melanargia galathea) inhabiting fragmented grasslands. Conservation Genetics, https://doi.org/0.1007/s10592-023-01593-4.

conservation-genetics

display_name: conservation-genetics

genetic-diversity

display_name: genetic-diversity

genetic-structure

display_name: genetic-structure

melanargia-galathea

display_name: melanargia-galathea

monitoring

display_name: monitoring

educ

en: Education, culture and sport

en: EnviDat: the Environmental Data Portal

en: Nuclear microsatellite genotypes of the butterfly Melanargia galathea


en: crack-propagation dry-snow-avalanche field-data crack-speed numerical-simulations weak-layer

en: Field data PST >30deg

en: Video analyze data up-slope

en: MPM data flat terrain

en: MPM data slope terrain

en: Field data PST <30deg

en: DEM data flat terrain

en: DAM data slope terrain

en: Video analyze data cross slope

en:
Compilation of normalized crack-propagation speeds (expressed as a fraction of the slab shear-wave speed).
The dataset contains crack-propagation speeds from DEM simulations (79 flat and 6 tilted; Bobillier et al., 2024), MPM simulations (48 flat and 191 tilted; Trottet et al., 2022), and field measurements: PSTs (222 data points, including 192 from low-angle terrain < 30°; van Herwijnen et al., 2016) and avalanche-video analyses (6 cross-slope and 5 down-slope speeds; Trottet et al., 2022).
The dataset also includes Python scripts that generate the relative-frequency distribution of the compiled, normalized crack-propagation speeds.
Bobillier, G., Bergfeld, B., Dual, J., Gaume, J., van Herwijnen, A., 55 and Schweizer, J.: Numerical investigation of crack propagation regimes in snow fracture experiments, https://doi.org/10.1007/s10035-024-01423-5 2024
Trottet, B., Simenhois, R., Bobillier, G., Bergfeld, B., van Herwijnen, A., Jiang, C. F. F., and Gaume, J.: Transi- 55 tion from sub-Rayleigh anticrack to supershear crack propagation in snow avalanches, Nat. Phys., 18, 1094–1098, https://doi.org/10.1038/s41567-022-01662-4, 2022.
van Herwijnen, A., Gaume, J., Bair, E. H., Reuter, B., Birkeland, K. W., and Schweizer, J.: Estimating the effective elastic modulus and specific fracture energy of snowpack layers from field experiments, J. Glaciol., 62, 997–1007, https://doi.org/10.1017/jog.2016.90, 2016a.

crack-propagation

display_name: crack-propagation

crack-speed

display_name: crack-speed

dry-snow-avalanche

display_name: dry-snow-avalanche

field-data

display_name: field-data

numerical-simulations

display_name: numerical-simulations

weak-layer

display_name: weak-layer

en: Compilation of normalized  crack propagation speeds


en: sea-salt-aerosol ice antarctica arctic snow

en: Fig 1F_1

en: Individual data to mean shown in Figure 1F

en: Fig 1B

en: Data in Figure 1B

en: Fig 1B_2

en: Individual data to mean shown in Figure 1B

en: Fig 1B_1

en: Fig 1C

en: Data to Figure 1C

en: Fig 1F

en: Data to Figure 1F

en: Fig 1D

en: Data to Figure 1D

en: Code

en: Matlab code to read and plot the data

en: Read Me

en: Description of the data tables

en: This table lists all data files in chronological order. "SampleTemp" refers to the reading of the PT-1000 at the side of the sample holder. "cellPressure" is the water vapour pressure during the measurements. From this, in presence of ice, the temperature of the ice sample can be calculated which is given in the column "iceTemp". "dT" is the difference, or temperature offset, between sensor's reading and the ice samples temperature. The offset is due to the sensor being mounted away from the cooled spot of the sample were it experiences heating from warmer parts of the sample holder. The off-set is used to calibrate the temperature sensor and the resulting temperature during the experiments is given in the column "temperature". "relHum" is the relative humidity above (supercooled) liquid and "concBrine" is the concentration of a NaCl solution in mol/l in equilibrium with ice at the experimental temperature. "Area" is the integrated PE signal.

en: Fib 1B_3

en: Fig 1E

en: Data to Figure 1E

en: Fig 1A

en: Data Figure 1A

en: Table 2

en: This table lists all NEXAFS data files in chronological order with PE carbon to oxygen signal intensity ratios -from which the atomic ratio were calculated in the paper - before ("preCtoO") and after ("postCtoO") each NEXAFS measurement. Also listed is the change in Na ("lossSodi"), O ("lossOxy"), Cl ("lossChlor"), and C ("lossCarb") signal intensity after the NEXAFS measurement compared to prior to the NEXAFS measurement.

en: Laboratory experiments are presented on the phase change at the surface of sodium chloride – water mixtures at temperatures between 259 K and 240 K. High selectivity to the upper few nanometres of the frozen solution – air interface is achieved by using electron yield near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. We present the NEXAFS spectrum of the hydrohalite.

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Data set on interfacial supercooling and the precipitation of hydrohalite in frozen NaCl solutions by X-ray absorption spectroscopy


maintainer: Markus Schlegel

en: environmental-dna metabarcoding monitoring spore-dispersal air-sampling

en: Data files and analysis scripts (Version 1)

en: This ZIP archive contains the data and source code necessary to reproduce the analyses for the manuscript "A case study on the application of spore sampling for the monitoring of fungi". Please refer to README.pdf inside the archive for more information.

en: Data files and analysis scripts (Version 2)

en: This ZIP archive contains the data and source code necessary to reproduce the analyses for the manuscript "A case study on the application of spore sampling for the monitoring of macrofungi". Please refer to README.pdf inside the archive for more information.

en:
Resources associated with the manuscript *A case study on the application of spore sampling for the monitoring of macrofungi* ([Schlegel et al. 2024](https://doi.org/10.1111/1755-0998.13941)).
Airborne environmental DNA (eDNA) monitoring of fungi was evaluated on a species-rich grassland site. Extensive fruiting body surveys yielded 29 waxcap and clavarioid species, 19 of which were also detectable in air eDNA. The analysis indicates that spores of locally occurring fruiting bodies were detected, in addition to a large diversity of common fungal species, while rare and threatened species were under-represented in the air.
*Version 1* of the dataset was submitted during the review phase. *Version 2* contains minor changes and clarifications, and is up to date with the [published supplement](https://onlinelibrary.wiley.com/action/downloadSupplement?doi=10.1111%2F1755-0998.13941&file=men13941-sup-0001-AppendixS1.pdf) of the study.
The contents of the ZIP archive:
* analysis scripts in [R-Markdown](https://rmarkdown.rstudio.com) format, including the rendered PDF output with figures and tables (*analysis* directory)
* eDNA sample metadata (*amplicon_meta*) and results of the amplicon clustering (*amplicon_data*) and the source code of the pipeline (*amplicon_pipeline*)
* positions of all fruiting body groups found in the surveys (3838 GPS points) (*surveys*)
* positions of the spore traps, taxonomy of studied grassland fungi and red-list species, and many more resources
Please refer to `README.pdf` inside the archive for a complete description of the file structure and information on how to reproduce the analyses.

air-sampling

display_name: air-sampling

environmental-dna

display_name: environmental-dna

metabarcoding

display_name: metabarcoding

spore-dispersal

display_name: spore-dispersal

educ

en: Education, culture and sport

en: EnviDat: the Environmental Data Portal

en: Supporting information for case study on the application of spore sampling for the monitoring of macrofungi


maintainer: Esther Frei

en: mountain-ecology literature-review stillberg long-term-experiment treeline-ecosystems

en: The Stillberg bibliography (Stillberg_bibliography_v1.zip) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals (Stillberg_bibliography_data_v1.csv) along with the metadata file (Stillberg_bibliography_metadata_v1.csv). Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title.

en:
 Background information

The Stillberg ecological treeline research site in the Swiss Alps was established in 1975, with the aim to develop ecologically, technically, and economically sustainable reforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Over almost fifty years, research at the Stillberg site combined long-term monitoring of the large-scale high-elevation afforestation with experimental manipulations simulating global change impacts. Besides providing a scientific basis and practical guidelines for high-elevation afforestation, this research has contributed to a comprehensive understanding of ecological processes in the treeline ecotone across different compartments and scales, from individual trees, non-tree vegetation and soils to whole ecosystems, in the context of global change resulting in more than 150 publications.

 Dataset generation

We compiled a comprehensive list of scientific publications covering research at the Stillberg research site by conducting searches in the literature databases Web of Science and Google Scholar, as well as in the Digital Object Repository of the Swiss Federal Institute for Forest, Snow and Landscape Research WSL (DORA). We compiled all publications about the afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, the G-TREE experiment, as well as other studies related to the Stillberg research site.

 Data description

The Stillberg bibliography (Stillberg_bibliography_data_v1.csv) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals. Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title. The bibliography is described in a metadata file (Stillberg_bibliography_metadata_v1.csv). The bibliography along with the metadata file are provided in a ZIP-folder (Stillberg_bibliography_v1.zip).

literature-review

display_name: literature-review

long-term-experiment

display_name: long-term-experiment

mountain-ecology

display_name: mountain-ecology

stillberg

display_name: stillberg

treeline-ecosystems

display_name: treeline-ecosystems

en: Bibliography of the long-term treeline research site Stillberg, Switzerland


maintainer: Merin Reji Chacko

en: invertebarates vascular-plants switzerland food-webs vertebrates metaweb trophic-networks

en: trophich 0.1

en: Deprecated version from before the first round of review at Scientific Data

en: trophiCH 1.0

en: Most current version of the dataset, after revision round 1 at Scientific Data.

en:
Environmental pressures on species can cascade within food webs and even extend beyond individual ecosystems to interconnected systems at large spatial scales. To facilitate the exploration of these dynamics, we constructed trophiCH: a data-based national trophic meta-food web (henceforth the metaweb), that includes vertebrates, invertebrates, and vascular plants within Switzerland's national boundaries, and drawing from literature published between 1862 and 2024. Our comprehensive dataset catalogues 1,112,073 trophic interactions involving 23,151 species and 125 feeding guilds (e.g., detritivores, fungivores, etc). Interactions were primarily documented at the species level from the literature. Additional species-level interactions were inferred by resolving coarser taxonomic records (e.g., using “species A feeds on genus B” to infer interactions between species A and species within genus B) using taxonomic and habitat co-occurrence information.
We provide seven datasets: 1) the metaweb, 2) the taxa checklist, 3) the data source meta-dataset, 4) the list of generalist basal and predator families and polylectic species with citations and 5) a dataset with citations for the inferences of missing predators, 6) a dataset with citations for the parallel inference of diets from similar species and 7) a list of other existing metawebs. The empirical dataset is 00_empirical_metaweb.csv. To reproduce the final metaweb (01_final_metaweb.csv), start the R Project file: trophich.Rproj. We provide five scripts, accompanying functions, and the raw data required to run these scripts to reproduce the taxonomic expansion and validation of the datasets. In the first script (01_inferring_interactions.R), we infer interactions using genus and family level interactions and for basal feeding groups (see Methods: Taxonomic expansion). In the second script (02_inferring_interactions_special_cases.R), we infer further interactions for a few special cases with detailed explanations. In the third script (03_metaweb_comparisons.Rmd), we provide the statistical comparisons between our metaweb and other empirical metawebs as an R Markdown document. We additionally provide a a Python Jupyter Notebook document, outlining the error validation of the data extraction process (04_error_validation.ipynb and an accompanying .html file). Finally, we provide a script to reproduce figure 1 from the associated data paper (05_metaweb_summary_figure_1.R).
This is a first step towards a comprehensive food web for Switzerland, but data gaps remain (see Reji Chacko et al 2024, Fig.1C). We encourage addition of new datasets to this metaweb and welcome any collaborations to contruibute to future versions of this dataset. Please contact: merin.rejichacko@gmail.com.

food-webs

display_name: food-webs

invertebarates

display_name: invertebarates

metaweb

display_name: metaweb

switzerland

display_name: switzerland

trophic-networks

display_name: trophic-networks

vascular-plants

display_name: vascular-plants

vertebrates

display_name: vertebrates

en: trophiCH v1 - a food web for Switzerland


maintainer: EnviDat Support

en: aerosol ccn hygroscopicity hac2 cloud-droplets

en: This repository contains the datasets that were used for used for the paper:: Drivers of Droplet Formation in East Mediterranean Orographic Clouds, EGUsphere, https://doi.org/10.5194/egusphere-2024-490, 2024.

aerosol

display_name: aerosol

ccn

display_name: ccn

cloud-droplets

display_name: cloud-droplets

hygroscopicity

display_name: hygroscopicity

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Dataset for the publication Drivers of Droplet Formation in East Mediterranean Orographic Clouds