en:
Surface topography maps (spatial extent: 400 m x 400 m) obtained at approximately 300 m from the top of the Hammarryggen Ice Rise in Dronning Maud Land, East Antarctica, using a Riegl VZ-6000 Terrestrial Laser Scanner (TLS). Scans were obtained on 5 days in the 2018-2019 Austral summer: on December 21 and 27, and January 2, 4 and 11. By using reflectors installed on bamboo poles, scans were registered with respect to the reflectors, such that the difference between two successive scans reveals the spatial patterns of erosion and deposition of snow. On each scan day, we used multiple scan positions to create one combined point cloud. After applying an octree filter on the point cloud, a 3D surface was obtained. For each day, the dataset contains a 1 mm and a 10 cm octree filter resolution file, only including points in a 400 m x 400 m area centered around the scan positions.

Notes:

* All files in the dataset are in the same coordinate system. However, this coordinate system is arbitrary (i.e., not related to any global coordinate system).

* From the installed reflectors, 4 reflectors could be used over the full period. The scan accuracy is generally higher within the area enclosed by the reflectors.

* The scans from January 2 were found to have exhibited small tilt during the scan and are of lesser accuracy.

* By walking along fixed corridors, disturbance of the snow was limited.

en: antarctica depth-of-snowfall gridded-data terrestiral-laserscanning terrestrial-laser-scans

envidat

en: EnviDat: the Environmental Data Portal

en: Terrestrial laser scans on Hammarryggen Ice Rise, Dronning Maud Land, East Antarctica

en: Scan from 21 December 2018, 10 cm resolution

en: Scan from 21 December 2018, 1 mm resolution

en: Scan from 27 December 2018, 10 cm resolution

en: Scan from 27 December 2018, 1 mm resolution

en: Scan from 2 January 2019, 10 cm resolution

en: Scan from 2 January 2019, 1 mm resolution

en: Scan from 4 January 2019, 10 cm resolution

en: Scan from 4 January 2019, 1 mm resolution

en: This resource is deprecated. It contains erroneous data.

en: Deprecated: Scan from 11 January 2019, 10 cm resolution, version 1

en: Scan from 11 January 2019, 1 mm resolution

en: Scan from 11 January 2019, 10 cm resolution, version 2

depth-of-snowfall

display_name: depth-of-snowfall

gridded-data

display_name: gridded-data

terrestiral-laserscanning

display_name: terrestiral-laserscanning

terrestrial-laser-scans

display_name: terrestrial-laser-scans


en:
The data set contained in this repository was used in the analysis by Mayer et al. (2023):
Mayer, S. I., Techel, F., Schweizer, J., and van Herwijnen, A.: Prediction of natural dry-snow avalanche activity using physics-based snowpack simulations, EGUsphere, https://doi.org/10.5194/egusphere-2023-646, 2023.

en: avalanche avalanche-size machine-learning natural-avalanches snowpack-model

envidat

approval_status: approved

fr: EnviDat est le portail de données du WSL; il offre un accès uniformisé et réglementé aux données de surveillance et de recherche en matière d’environnement. Ce portail est capable d’héberger et de publier des ensembles de données précieuses et uniques, qui sont partagées aux quatre coins de la planète. Ce faisant, EnviDat favorise la recherche et contribue à l’avancement des sciences environnementales.

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

de: EnviDat ist das Datenportal der WSL für einen einheitlichen und verwalteten Zugang zu Umweltdaten aus Monitoring- und Forschungsprojekten. Auf dem Portal können Datensätze gehostet und veröffentlicht werden. Durch die weltweite Bereitstellung einzigartiger und wertvoller Datensätze leistet EnviDat einen Beitrag zur Forschung im Bereich der Umweltwissenschaften.

it: EnviDat è il portale dati del WSL che fornisce un accesso unificato e gestito ai dati di monitoraggio ambientale e di ricerca. Il portale ha la capacità di ospitare e pubblicare serie di dati preziosi e unici che vengono condivisi in tutto il mondo. Così facendo, EnviDat promuove la ricerca e contribuisce al progresso della scienza ambientale.

de: EnviDat: das Umwelt-Datenportal

fr: EnviDat: le portail de données environnementales

it: EnviDat: il portale dei dati ambientali

political_level: other

state: active

type: organization

wsl

capacity: public

en: Data-set for prediction of natural dry-snow avalanche activity and avalanche size using physics-based snowpack simulations

type: dataset

key: guid

key: uri

value: Envidat Harvester

educ

de: Bildung, Kultur und Sport

en: Education, culture and sport

fr: Éducation, culture et sport

it: Istruzione, cultura e sport

en: Data set AV1 was used for training the avalanche-day classifier (Sections 2.1.1, 2.2, and 3.1 in Mayer et al.).

format: XLS

en: Data set AV2 used for training the avalanche-size estimator (Sections 2.1.2 and 3.2 in Mayer et al.)

en: Data set DL was used for validation of the avalanche-day classifier and the avalanche-size estimator. The data set contains the quality-checked danger levels merged with the respective SNOWPACK simulations (Sections 2.3 and 3.3(2) in Mayer et al.).

en: Data set AV3 was used for validation of the avalanche-day classifier (Sections 2.1.3 and 3.3(1) in Mayer et al.).

avalanche

display_name: avalanche

avalanche-size

display_name: avalanche-size

machine-learning

display_name: machine-learning

natural-avalanches

display_name: natural-avalanches

snowpack-model

display_name: snowpack-model


en:
This dataset contains the raw environmental DNA data associated with the publication *Environmental drivers of eukaryotic plankton and fish biodiversity in an Arctic fjord* in the journal Polar Biology (2023).

 Methods

**Sampling**
We sampled the Lilliehöök fjord on the west coast of Spitsbergen (Svalbard, Norway) over 3 days from 3 to 5 of August 2021. Samples were taken from the glacier front up to the fjord mouth of the Krossfjorden system, around 30 km long, after the Lilliehöök fjord merged with the mouth of Möller fjord. The fjord’s maximum depth has been recorded at 373 m (Svendsen et al. 2002) and has no sill at its entrance, thereby facilitating water exchange with the open ocean of the West Spitsbergen Current. We used a research vessel to sample 5 sites for a total of 15 samples, sampling 3 depths per site (3-m, chlorophyll a maximum and 85-m, unless sea floor was shallower). Shallow and intermediate samples between 3-m and 12-m represent ~35-L of water filtered in-situ using long tubing and a peristaltic pump, and all other deeper samples were taken from a total of 3 Niskin bottles (General Oceanics), representing 22-L of water sampled per sample. Water was filtered through a VigiDNA filtration capsule (SPYGEN) with a 0.20-µm pore size using an Athena peristaltic pump (Proactive Environmental Products, Bradenton, Florida) with a flow rate of ~1-L/min. Each sample was handled with single use tubing and gloves.

**Molecular**
To perform the amplification, we used two sets of primers: teleo (forward: ACACCGCCCGTCACTCT, reverse: CTTCCGGTACACTTACCATG; Valentini et al. 2016) and the universal eukaryotic 1389F/1510R primer pair, amplifying the V9-18S rDNA gene (Amaral-Zettler et al. 2009) (forward: TTGTACACACCGCCC, reverse: CCTTCYGCAGGTTCACCTAC).

 Data content:

+ Metabarcoding data: This zip file contains the 2 sequencing libraries filtered to only retain the samples used in the present study.
+ Code, data and figure: This zip file contains all data and code to reproduce the figures and the analysis in the study, with an associated README explaining the content of each folder.

 Additional informations
For more details, please see the Methods in the associated publication: DOI: 10.1007/s00300-023-03187-9.

en: biodiversity dna-metabarcoding environmental-dna fish fjord marine plankton

envidat

en: EnviDat: the Environmental Data Portal

en: Data: Environmental drivers of eukaryotic plankton and fish biodiversity in an Arctic fjord

en: Raw metabarcoding data for both primers (teleo and 18S) and corresponding file to perform the demultiplexing and primer trimming

en: Metabarcoding data

format: ZIP

media_type: application/zip

en: Here there are all the data and code to reproduce the figures and analysis presented in the paper, with a README.md file

en: Code, data and figures

biodiversity

display_name: biodiversity

dna-metabarcoding

display_name: dna-metabarcoding

environmental-dna

display_name: environmental-dna

fish

display_name: fish

fjord

display_name: fjord

marine

display_name: marine

plankton

display_name: plankton


en:
This dataset contains all data and R codes (R Development Core Team, https://www.R-project.org) used in the following publication: Donati GFA, Parravicini V, Leprieur F, Hagen O, Gaboriau T, Heine C, Kulbicki M, Rolland J, Salamin N, Albouy C, Pellissier L. "A process-based model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted by Ecography in August 2019. When using this data and R scripts the above publication should be cited.

The interaction of habitat dynamics with species dispersal abilities could generate gradients
in species diversity and prevalence of life-history and ecological traits, when the latter are associated with dispersal potential. In this dataset, we use a spatial mechanistic model of speciation, extinction and dispersal, constrained by a dispersal parameter. This model allows to simulate the interplay between reef habitat dynamics over the past 140 million years and dispersal, shaping lineage diversification history and global assemblage composition of over 6000 tropical reef fish species. Global trait distribution data of tropical reef fish are used to evaluate the congruence between simulations and observations.

en: biodiversity dispersal ecology reef-fish traits

en: Simulated and observed prevalence of dispersal-related traits in tropical reef fish assemblages worldwide

en: Each species corresponds to a "Gaspar_code" gathered from the General Approach to Species Abundance Relationships (GASPAR) database (Kulbicki et al. 2013, Parravicini et al. 2013) and is linked to a specific Fishned ID corresponding to a specific Latitude and Longitude.

en: Global species distribution of tropical reef fish species

format: CSV

media_type: text/csv

en: Dispersal parameter value d per simulation starting with a minimum dispersal value, where each species is able to colonise each adjacent cell, and ending with the value of d for which all the extant habitats, including the most remote Pacific islands, have been colonised (d ∈ [1.75°: 5.45°]).

format: TXT

media_type: text/plain

en:
Global distribution of simulated species richness under a range of dispersal parameter values d
d ∈ [1.75°: 5.45°].

en: Global simulated distribution of species under a range of dispersal parameter values

en:
Grid cells of 5 × 5°, corresponding to circa 555 × 555 km at the Equator (see Parravicini et al. 2013, Leprieur et al. 2016)

Parravicini, V. et al. 2013. Global patterns and predictors of tropi- cal reef sh species richness. – Ecography 36: 1254–1262.

Leprieur, F. et al. 2016. Plate tectonics drive tropical reef biodiver- sity dynamics. – Nat. Commun. 7: 11461.

en: Coral reef grid cells (shape, dbf, etc. files)

en: Global coast files from https://www.ngdc.noaa.gov/mgg/shorelines/gshhs.html used in the Figures

en: Simulated rates of speciation and extinction under a range of dispersal parameters. Net diversification rates are calculated from the difference between speciation and extinction rates. This data allows the creation of Figure A4 in Supporting information, Appendix 1.

format: SERVICE

en: Input for spatial congruence test overlap between proportions of low and high dispersal and observed low- and high- dispersal-related traits in assemblages (30-50% threshold). see Table 2.

en: Geographic distribution data (species richness and proportions of high/low dispersal-related traits) on predominantly low dispersing and high dispersing species expected based on the simulations, and those where low- and high- dispersal related traits values are observed for the five investigated traits.

en: Input for the Global distribution maps for proportions of species richness for (a) simulated dispersal parameter value (b) observed dispersal-related traits

en: Functions for Figures illustrated in Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019.

en: Functions used in R scripts in: Donati et al. 2019 "A process-based-model supports an association between  # dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019

en:
Main script used in : Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages"
accepted in Ecography, August 2019

en: Donati et al. main script

en: R Script used for figures in main text in: Donati et al. 2019: "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography, August 2019.

en: Main text figures

en: Supplementary material Appendix 1 Figures illustrated in Donati et al. 2019 "A process-based-model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages". accepted in Ecography, August 2019

en:
Species trait (i.e. adult body size, home range mobility behaviour, circadian activity and schooling) data gathered from the General Approach to Species Abundance Relationships (GASPAR) database (Kulbicki et al. 2013, Parravicini et al. 2013).

Kulbicki, M. et al. 2013. Global biogeography of reef shes: a hier- archical quantitative delineation of regions. – PLoS One 8: e81847.

Parravicini, V. et al. 2013. Global patterns and predictors of tropi- cal reef sh species richness. – Ecography 36: 1254–1262.

To complement the trait data with Pelagic Larval Duration information refer to the following publication:

Luiz, Osmar J., et al. "Adult and larval traits as determinants of geographic range size among tropical reef fishes." Proceedings of the National Academy of Sciences 110.41 (2013): 16498-16502.

In Donati et al. "A process-based model supports an association between dispersal and the prevalence of species traits in tropical reef fish assemblages" accepted in Ecography in August 2019, we used the PLD gathered from Luiz et al. 2013 as described in the methods - section "Species trait data".

en: Tropical reef fish trait data

dispersal

display_name: dispersal

ecology

display_name: ecology

reef-fish

display_name: reef-fish

traits

display_name: traits


en: The dataset contains seven environmental layers (average annual temperature, aridity [annual precipitation divided by annual potential evapotranspiration], frost change frequency, precipitation in the driest quarter, mean diurnal temperature range, and precipitation seasonality) modified from CHELSA (https://chelsa-climate.org/) and three soil layers (soil organic matter content, pH water, and clay content) modified from SoilGrids (https://soilgrids.org/).

en: aridity frost-change-velocity ground-temperature precipitation sdms soil

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Environmental layers for SDM simulations (GDPlants)

educ

en: Education, culture and sport

en: Precipitation seasonality from CHELSA

en: Precipitation of driest quarter modified from CHELSA

format: TIFF

media_type: image/tiff

en: Mean annual temperature modified from CHELSA

en: Mean diurnal range modified from CHELSA

en: Frost change frequency modified from CHELSA

en: Soil clay content modified from SoilGrids

en: Soil organic carbon content modified from SoilGrids

en: Soil pH modified from SoilGrids

aridity

display_name: aridity

frost-change-velocity

display_name: frost-change-velocity

ground-temperature

display_name: ground-temperature

precipitation

display_name: precipitation

sdms

display_name: sdms

soil

display_name: soil


en: Despite the common role of above- and below-ground herbivore communities in mediating ecosystem functioning, our understanding of the variation of species communities along natural gradient is largely strongly biased toward aboveground organisms. This dataset enables to study the variations in assemblages of two dominant groups of herbivores, namely, aboveground orthoptera and belowground nematodes together with their food plants. Herbivores and plant surveys were conducted in 48 natural grasslands along six elevation gradients, selected to span the major macro-climatic and environmental conditions of the Swiss Alps. It compiles herbivores and plant surveys, information on the study sites as well as plant and herbivores functional traits sought to be involved in trophic interactions and to respond to climatic variation along the elevation. Plant functional traits considered are the SLA, the LDMC, the C/N content, the punch strength (i.e. force required to pierce the leave lamina), the mandibular strength for Orthoptera insect. Data were collected during the summer 2016 and 2017.

en: alps community-indices elevation environmental-gradients functional-traits herbivores-communities plant-herbivore-interactions

en: Above- and below-ground herbivore communities along elevation

en: Surveys of soil nematode along elevation

en: Nematode surveys

en: Species inventories of Orthoptera

en: Orthoptera surveys

en: Species inventories of plants

en: Vegetion surveys

en: Coordinates and elevation of the study sites

en: Study sites

en: Plant functional traits (SLA, LDMC, carbon and nitrogen content, punch strenght; averaged by species)

en: Plant traits

en: Orthoptera functional traits (incisive mandibular strength averaged by species)

en: Orthoptera traits

alps

display_name: alps

community-indices

display_name: community-indices

elevation

display_name: elevation

environmental-gradients

display_name: environmental-gradients

functional-traits

display_name: functional-traits

herbivores-communities

display_name: herbivores-communities

plant-herbivore-interactions

display_name: plant-herbivore-interactions


en:
Data and scripts of publication:

Madleina Gerecke, Oskar Hagen, Janine Bolliger, Anna M. Hersperger, Felix Kienast, Bronwyn Price, Loïc Pellissier (2019) Assessing potential landscape service trade-offs driven by urbanization in Switzerland. Palgrave communications.

Contains land use projections for Switzerland and scripts and data for these projections as well as the calculation of landscape services.

Data Folder:
Contains sub-folder with the data necessary for this study (provided were no copyright issues, otherwise placeholders with descriptions), and folders where produced data may be stored

Scripts Folder:
Contains scripts organized into subfolders depending on their purpose

Note: Some abbreviations within the scripts and data are derived from German words and not English.

en: land-use land-use-change landscape-services modeling statistical-model switzerland urbanization

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Land use projections and services for Switzerland

educ

en: Education, culture and sport

en:
The provided folder structure follows the set up of the scripts.
Data is only provided when it has been fully produced by us, otherwise dummies are given.
For data that will be produced by one of the scripts, no dummies are given.
The folders may contain sub-folders, which would be filled if the scripts were all run

 00_Analysis_Data
Data produced throughout the process of the calibration and projection that is later needed for analysis

 01_Raw_Data
Primary data from external sources that were used to compile the rasters and numbers used during the calibration and projection of landscape transitions as well as service calculation

 02_Prepared_Data
Data that will be prepared for further use by scripts are put in here
Additionally it contains the parameter sheets for the transition predictors that we compiled

 03_Model_Data
 Model outputs
Folder were the projection models statistics will be saved
 Models
Folder into which the actual transition models will be saved
 Residuals
Folder into which data on models residuals will be saved for future use

 04_Projected_Data
The output of the projections will be saved into this folder

 05_Service_Data
Any service calculations will be saved in here

 06_Results_Analysis
Any Analysis plots and tables as well as intermediate data will be saved here in the respective sub-folder

en: Data for Assessing potential landscape service trade-offs driven by urbanization in Switzerland

en:
Scripts ordered by their main purpose within sequential folders in this ReadMe marked with

Within the folders the capital letters refer to the parallel or sequential use of the scripts; scripts here in ReadMe are marked with

 00_Function Scripts
 Functions.r
Script containing several functions for analyzing statistical models: cohen.kappa, meva.table, D2, max-Tss, plot-TSS

 Service_functions.R
Script containing functions for calculating all services and returning sums (and median for bd and rec) as well as rasters

 01_Data Preparation
 A_AS_raster_preparation.R
Preparation of the land use rasters for the years 1985, 1997, and 2009 based on the original Arealstatistik (AS/ASCH); Assigning our categories and assining new values to all "construction sites" for calibrating the models
For model projection starting point (2009) and for service calculations (all ASCH years) the "other" categories were assigned to the land use categories based on dominant neighbor, so that there were no empty cells
Creation of water & mountainous area raster that stayed stable throughout the projections
Creation of MFH raster (2009), to have as base for all new projection years, as this category never becames any other

 B_Factors_preparation.R
Preparation of the factor rasters that were used to calculate service values per cell (see Table 2): LWfactor, Transportation, Vol, Rivers, Lakes, slope, TWW, Hazard_risk

 B_Predictors_preparation.R
Preparation of the raster of the predictors used for calibrating (ASCH years) and projecting (stable) the transition models that do not depend on the land use categories: Temperature (ASCH years), solar radiation (stable), Public transportation access (stable), Elevation (stable), Workers density (ASCH years), Population change (ASCH transitions)

 B_Regions_preparation.R
Preparation of bioregions as raster to be used to mask asxxxx later to calculated services and land use area just for one region

 C_Pred_proj.R
Projecting the dynamic predictors into the future for projecting the land use transitions with the model: Linear extrapolations for workers densities and population; more detailed extrapolation of temperature (based on data for all stations that matched between the temp table we used for the calibration period and the projections from CS2M, and then making a spatial interpolation for all years based on the interpolation of temperature for all years per station)

 02_Model calibration
 A_Bioreg_pred_corr.R
Calculating correlation between the predictors for each bioregion and land use category, Output are those with too high correlation so that one predictor can be removed from transitions were both predictors occur

 A_trans_numbers_bioreg.R
Calculate transition numbers for each bioregion to decide which transitions to primarily consider

 B_Bioreg_ext_eval.R
Calculating TSS based on the external evaluation for the bioregion transitions that happened often enough to try to model them (calibration data: 85-97, evaluation data: 97-09)

 B_Bioreg_int_eval.R
Calculating TSS based on the internal evaluation for the bioregion transitions that happened often enough to try to model them (calibration data: 70%, evaluation data: 30%)

 C_Bioreg_TSS_analysis.R
Extracting TSS numbers from internal and external evaluation, calculating mean and median for each transition for each region for each evaluation method and saving as csv per region to be able to select only the transitions with high enough model performance

 D_Bioreg_Models_for_prediction.R
Calibration of the models that were then used to project land use transitions into the future; calibrated separately for each bioregion

 E_Residuals_trans_models.R
Calculation of Moran's I statistics to analyze the residuals of the land use transition models

 03_Projections
 A_Bioreg_Projections_run.R
Master script for: Extrapolaitng into the future with the regional models and then assembling for each time step to calculate new AS predictors; Several Outputs: txt file to test for NAs in Predictors, txt file with random seed number for sampling, txt file with times for calculation steps (check progress of script while running), csv sheet with projected transition frequencies, tif-rasters for every region and time step, pdf with raster plot for every region and time step

 04_Service calculation
 A_Bioreg_as_services.R
Calculate services per bioregion for years 1985, 1997, 2009

 A_Service_calculation_bioregions.R
Extracting service numbers(sums) per bioregions for all projection runs and storing them in a list of matrixes to be available for further plotting; can be run for swiss wide projections or regional ones

 05_Analysis
 A_Bioreg_ASCH_development.R
Extracting the occurrence of each category per region for all runs (first part), then for ASCH years, and then plotting them nicely; only works for regional projections

 A_Bioreg_Predictors_importanceD2.R
Calculating D2 for each transition and each considered predictor from bivariate models to get value of importance

 B_Bioreg_Pred_imp_analysis.R
Using calculated D2 to sort Predictors according to their importance for each transition

 A_Bioreg_Spatial_results_analysis.R
Plotting randomly sampled runs for ASCH and services to analyses their spatial development

 A_Bioreg_Transition_numbers_check_v1.R
Analyzing the frequency for all transitions for all regions and producing the point plots for each transition separately

 A_Bioreg_Transition_numbers_check_v2.R
Analyzing percentage and numbers of all transitions but plotting them per region and originating ASCH category

 B_Transition_Analysis.R
Further Analysis of transition numbers

 A_Service_analysis.R
Plotting of the service development for bioregions in several ways for analyzing

en: Scripts for Assessing potential landscape service trade-offs driven by urbanization in Switzerland

land-use

display_name: land-use

land-use-change

display_name: land-use-change

landscape-services

display_name: landscape-services

modeling

display_name: modeling

statistical-model

display_name: statistical-model

switzerland

display_name: switzerland

urbanization

display_name: urbanization


en:
 Background information
The Stillberg ecological treeline research site is located in the transition zone between the relatively humid climate of the Northern Alps and the continental climate of the Central Alps. In 1975, 92,000 seedlings of the high-elevation conifer species *Larix decidua* Mill. (European larch), *Pinus cembra* L. (Cembran pine), and *Pinus mugo* ssp. *uncinata* (DC.) Domin (mountain pine) were systematically planted across an area of 5 hectares along an elevation gradient of about 150 metres, with the aim to develop ecologically, technically, and economically sustainable afforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Alongside the ecological long-term monitoring of the afforestation, several meteorological stations have recorded local meteorological conditions at the Stillberg research site. Here, we provide the Davos Stillberg meteorological timeseries of five stations from 1975 (01-01-1975), the year of the afforestation establishment, until the end of the year 2022 (31-12-2022).

 Station description
The five meteorological stations were all installed at the same location (46°46′25.015″N 9°52′01.792″E) at 2090 m a.s.l., in the lower part of the afforestation area. In general, the five stations were operated sequentially (Stillberg_meteo_metadata_stations_v1.csv). However, there are some overlapping time periods when more than one station was operated in parallel. The stations have recorded environmental parameters, such as air and soil temperature, dew point temperature, air pressure, relative humidity, wind direction and velocity, radiation, precipitation, and snow depth (Stillberg_meteo_metadata_parameters_v1.csv). The meteorological measurements were recorded hourly from 1975 until 1996 and have been recorded in 10-minute intervals since 1997.

 Data description
We processed the Davos Stillberg meteorological timeseries with the MeteoIO meteorological data pre-processing library (Bavay & Egger, 2014). Data files are provided for each station and quality level separately and named according to the station (see ‘Stillberg_meteo_metadata_stations_v1.csv’). From the raw data in their original formats, we generated three data quality levels: raw standardized (folder ‘raw_standardized’), edited (folder ‘raw_edited’) and filtered (folder ‘filtered’). The processing level is indicated in the headers of the data files. The whole processing protocol is described in a set of human-readable configuration files that are used by MeteoIO to generate the required data quality levels. This improves long-term reproducibility (Bavay et al., 2022), as the data could be regenerated in the future, even using a completely different software, to account for additional data points or to introduce new data corrections. The first quality level (raw standardized) is generated by parsing the original data files and interpreting them in order to convert all data points to a common format and meteorological parameter naming scheme, while excluding unreadable or duplicated data lines. The generated data files are derivatives of CSV files, with a standardised header that contains the metadata that are necessary to interpret and use the data (use metadata) and to populate a data index (search metadata). The latter is a textual implementation of the Attribute Convention for Data Discovery (ACDD) metadata standard (Attribute Convention for Data Discovery 1-3, 2022). The second quality level (edited) builds on the raw data by performing low-level data editing, such as removing some data periods that are known to be unusable (often based on maintenance records or anecdotal evidence) or applying undocumented calibration factors (for example, when there seems to be an obvious offset on a measured parameter for a period between two documented maintenance operations). The third quality level is generated by applying statistical filters on the data (per station and per meteorological parameter) to exclude presumably wrong values. We did not perform gap filling, as no single strategy could be relied upon that would work best for all possible data usage scenarios.

en: air-pressure air-temperature dew-point-temperature precipitation-sum relative-humidity shortwave-radiation snow-depth soil-temperature stillberg treeline wind-direction wind-speed

en: Long-term meteorological station Stillberg, Davos, Switzerland at 2090 m a.s.l.

en: The Davos Stillberg meteorological data (Stillberg_meteo_v2.0.zip) consists of timeseries from five meteorological stations operated at the Stillberg treeline ecological resea...

en: The Davos Stillberg meteorological data (Stillberg_meteo_v1.1.zip) consists of timeseries from five meteorological stations operated at the Stillberg treeline ecological research site. Metadata are provided in the folder 'Stillberg_meteo_metadata' and the data in the folder 'Stillberg_meteo_data' with subfolders for the three quality levels 'raw_standardized', ‘raw_edited’, and ‘filtered’.

en: The Davos Stillberg meteorological data (Stillberg_meteo_v1.zip) consists of timeseries from five meteorological stations operated at the Stillberg treeline ecological research site. Metadata are provided in the folder 'Stillberg_meteo_metadata' and the data in the folder 'Stillberg_meteo_data' with subfolders for the three quality levels 'raw_standardized', ‘raw_edited’, and ‘filtered’.

air-pressure

display_name: air-pressure

air-temperature

display_name: air-temperature

dew-point-temperature

display_name: dew-point-temperature

precipitation-sum

display_name: precipitation-sum

relative-humidity

display_name: relative-humidity

shortwave-radiation

display_name: shortwave-radiation

snow-depth

display_name: snow-depth

soil-temperature

display_name: soil-temperature

stillberg

display_name: stillberg

treeline

display_name: treeline

wind-direction

display_name: wind-direction

wind-speed

display_name: wind-speed


en:
We conducted consecutive loading-relaxation experiments at low strain rates to study the viscoplastic behavior of the intact ice matrix in snow. The experiments were conducted using a micro-compression stage within the X-ray tomography scanner in the SLF cold laboratory.

Next, to evaluate the experiments, a novel, implicit solution of a transient scalar model was developed to estimate the stress exponent and time scales in the effective creep relation (Glen's law). The result reveals that, for the first time, a transition in the exponent in Glen's law depends on geometrical grain size. A cross-over of stress exponent $n=1.9$ for fine grains to $n=4.4$ for coarse grains is interpreted as a transition from grain boundary sliding to dislocation creep.

The dataset includes compression force data from 11 experiments and corresponding 3D image data from tomography scans.

en: ice microstructure slow-snow-compression-experiments snow-mechanics x-ray-tomography

en: A grain-size driven transition in the deformation mechanism in slow snow compression

en: README file gives an overview of the organization of the data

en: README

en: Compression experiments, X-ray images and with supplemented README file

en: slow snow compression experiments

ice

display_name: ice

microstructure

display_name: microstructure

slow-snow-compression-experiments

display_name: slow-snow-compression-experiments

snow-mechanics

display_name: snow-mechanics

x-ray-tomography

display_name: x-ray-tomography


en:
 Background information

The Stillberg ecological treeline research site in the Swiss Alps was established in 1975, with the aim to develop ecologically, technically, and economically sustainable reforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Over almost fifty years, research at the Stillberg site combined long-term monitoring of the large-scale high-elevation afforestation with experimental manipulations simulating global change impacts. Besides providing a scientific basis and practical guidelines for high-elevation afforestation, this research has contributed to a comprehensive understanding of ecological processes in the treeline ecotone across different compartments and scales, from individual trees, non-tree vegetation and soils to whole ecosystems, in the context of global change resulting in more than 150 publications.

 Dataset generation

We compiled a comprehensive list of scientific publications covering research at the Stillberg research site by conducting searches in the literature databases Web of Science and Google Scholar, as well as in the Digital Object Repository of the Swiss Federal Institute for Forest, Snow and Landscape Research WSL (DORA). We compiled all publications about the afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, the G-TREE experiment, as well as other studies related to the Stillberg research site.

 Data description

The Stillberg bibliography (Stillberg_bibliography_data_v1.csv) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals. Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title. The bibliography is described in a metadata file (Stillberg_bibliography_metadata_v1.csv). The bibliography along with the metadata file are provided in a ZIP-folder (Stillberg_bibliography_v1.zip).

en: literature-review long-term-experiment mountain-ecology stillberg treeline-ecosystems

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Bibliography of the long-term treeline research site Stillberg, Switzerland

educ

en: Education, culture and sport

en: The Stillberg bibliography (Stillberg_bibliography_v1.zip) comprises a comprehensive list of 276 scientific publications, 91 of them published in peer-reviewed ISI journals (Stillberg_bibliography_data_v1.csv) along with the metadata file (Stillberg_bibliography_metadata_v1.csv). Currently the bibliography comprises literature about the main afforestation experiment, the FACE × warming experiment, the nutrient addition experiment, and the G-TREE experiment, as well as further publications related to the Stillberg research site that have been published until August 2023. The bibliography can be filtered for different categories, e.g., experiment, peer-review, source repository or database, and source title.

literature-review

display_name: literature-review

long-term-experiment

display_name: long-term-experiment

mountain-ecology

display_name: mountain-ecology

treeline-ecosystems

display_name: treeline-ecosystems


en:
The dataset "Lake_climate_change_scenarios_CH2018" provides simulation-based climate change impact scenarios for perialpine lakes in Switzerland. These transient future scenarios were produced by combining the hydrologic model PREVAH with the hydrodynamic model MIKE11 to simulate daily lake water level (Lake_water_level_scenarios_CH2018.xls) and outflow scenarios (Lake_outflow_scenarios_CH2018.xls) from 1981 to 2099, using the Swiss Climate Change Scenarios CH2018. The future scenarios contain a total of 39 model members for three Representative Concentration Pathways, RCP2.6 (concerted mitigation efforts), RCP4.5 (limited climate mitigation) and RCP8.5 (no climate mitigation measures). These scenarios result from the study titled "Lower summer lake levels in regulated perialpine lakes, caused by climate change," authored by Wechsler et al. in 2023.

The dataset emphasizes four specific Swiss lakes, each subject to different degrees of lake level management: an unregulated lake (Lake Walen), a semi-regulated lake (Lake Brienz), and two regulated lakes (Lake Zurich and Lake Thun).

In addition, the file (Lake_characteristics.xlsx) includes data used in the modeling process, encompassing the stage-area relation for the four lakes, stage-discharge relations for the unregulated and semi-regulated lakes, and lake level management rules for the two regulated lakes.

en: climate-change hydrologic-and-hydrodynamic-modelling lake-level-regulation perialpine-lakes switzerland

en: Lake climate change scenarios CH2018

en: Lake water level scenarios for Lake Walen, Lake Zurich, Lake Brienz and Lake Thun.

en: Lake water level scenarios CH2018

en: Lake outflow scenarios for Lake Walen, Lake Zurich, Lake Brienz and Lake Thun.

en: Lake outflow scenarios CH2018

en: Lake characteristics: stage-area relation for Lake Walen, Lake Zurich, Lake Brienz and Lake Thun, stage-discharge relations for the unregulated Lake Walen and semi-regulated Lake Brienz and, lake level management rules for the two regulated lakes Zurich and Thun.

en: Lake characteristics

climate-change

display_name: climate-change

hydrologic-and-hydrodynamic-modelling

display_name: hydrologic-and-hydrodynamic-modelling

lake-level-regulation

display_name: lake-level-regulation

perialpine-lakes

display_name: perialpine-lakes

switzerland

display_name: switzerland


en:
 Background information

The Stillberg ecological treeline research site in the Swiss Alps was established in 1975, with the aim to develop ecologically, technically, and economically sustainable reforestation techniques at the treeline to reduce the risk of snow avalanches. In the course of time, additional research aspects gained importance, such as the ecology of the treeline ecotone under global change. Long-term monitoring of the large-scale high-elevation afforestation has generated data about tree growth, survival, and vitality. In addition, detailed characteristics of the microsite conditions of the research were conducted. Besides providing a scientific basis and practical guidelines for high-elevation afforestation, this research has contributed to a comprehensive understanding of ecological processes in the treeline ecotone.

 Experiment description

The Stillberg afforestation experiment was established in 1975 by planting 92,000 seedlings of *Larix decidua*, *Pinus cembra* and *Pinus mugo* ssp. *uncinata* in the alpine treeline ecotone. The afforestation site is located on a northeast-facing slope with steep, topographically highly structured terrain and covers elevations from 2075 to 2230 m a.s.l. The afforestation site was divided into 4052 square plots of 3.5 × 3.5 m, arranged in a regular species-alternating pattern over the whole area. Each plot contained 25 trees of one species (1350 plots per species), and the seedlings were systematically planted 70 cm apart. The trees have been monitored since 1975. Specifically, tree mortality was assessed annually from 1975 until 1995 and has been documented every ten years since then, with surveys in 2005 and 2015 (the next survey is due in 2025). Height of the surviving trees was measured in 1975, 1979, 1982, 1985, 1990, 1995, 2005, and 2015. In 1995, 2005, and 2015, drivers of tree vitality were assessed for a subset of trees per plot. Additionally, an extensive set of environmental parameters characterizing microsite conditions of the afforestation area were recorded before and after the planting of the trees.

 Data description

The five datasets from the afforestation experiment comprise ecological and environmental data from the main afforestation experiment in five datasets with accompanying metadata (Stillberg_afforestation_all_metadata.xlsx). All data and metadata files are bundled in a ZIP-file (Stillberg_afforestation_v1.zip). In particular, a first dataset contains environmental data characterising microsite conditions of the 4000 plots with regard to soil, topography, vegetation and microclimatic conditions (Stillberg_afforestation_plot_data_v1.csv; Stillberg_afforestation_plot_metadata_v1.csv. In each plot, the natural tree regeneration was assessed by counting seedings of several tree species in 2005 and 2015 (Stillberg_afforestation_regeneration_data_v1.csv; Stillberg_afforestation_regeneration_metadata_v1.csv). Furthermore, specific information about each of the 92’000 planted trees of the tree species is available (Stillberg_afforestation_tree_parameter_data_v1.csv; Stillberg_afforestation_tree_parameter_metadata_v1.csv). Survival data for each of the 92’000 individual trees can be found in a separate dataset (Stillberg_afforestation_tree_survival_data_v1.csv; Stillberg_afforestation_tree_survival_metadata_v1.csv). Tree growth and vitality parameters are available for all trees from 1995, and for subsets of trees for 2005 and 2015 (Stillberg_afforestation_tree_measurements_data_v1.csv; Stillberg_afforestation_tree_measurements_metadata_v1.csv).

en: afforestation long-term-experiment mountain-forest stillberg treeline

en: Long-term afforestation experiment at the Alpine treeline site Stillberg, Switzerland

afforestation

display_name: afforestation

mountain-forest

display_name: mountain-forest

stillberg

display_name: stillberg

treeline

display_name: treeline


en: This repository contains PMCMx-UF model outputs used for the paper: D. Patoulias K. Florou S. N. Pandis and A. Nenes: New particle formation events can reduce cloud droplets in boundary layer clouds at the continental scale, Geophysical Research Letters, in review, 2023.

en: cloud-droplets modeling nucleation pmcamx-uf total-number

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Dataset for the publication New particle formation events can reduce cloud droplets in boundary layer clouds at the continental scale

en: data_JRL_New particle formation events can reduce cloud droplets in boundary layer clouds at the continental scale.Paper_2023GL106182.zip

cloud-droplets

display_name: cloud-droplets

modeling

display_name: modeling

nucleation

display_name: nucleation

pmcamx-uf

display_name: pmcamx-uf

total-number

display_name: total-number


en:
The data was generated during a landscape experiment performed on 69 plots in Sihlwald forest between 2016 and 2019. Branch bundles of different sizes consisting of beech branches were exposed in the forest for one year to be colonized by saproxylic beetles and later reared for one year in emergence traps. All beetles emerging from the branches were collected. Overall 244 branch bundles are included and we found 66 beetles species (23511 individuals) of which 43 were classified as saproxylic (20873 individuals).
 Species data (2 tables)
Two community matrices (including abundance): one for saproxylic beetles and one for all beetles. Beetles were classfied as saproxylic following an extended list of the list reported in Schmidl & Bussler (2004).
 Model data (1 table)
*Response variables*
Species richness and abundance of (saproxylic) beetles.
*Branch bundles*
Branch bundles consisted of 1, 3, 6 or 12 branches and each bundle size was installed at each of the 69 plots. The bundles consisted of standardized freshly cut beech branches (Fagus sylvatica) with a length of 80 cm and a diameter between 3 and 6 cm. Total surface and volume of each bundle is reported.
*Tree on which the bundle was installed*
Information on the tree to which the bundles were attached (tree species, dbh, distance and azimut from the plot center).
*Temperature and light availability*
Temperature (plot level) and light availability (bundle level) were calculated.
*Deadwood availability in the landscape*
Based on a map of lying dead wood, dead wood amount and isolation were calculated for concentric circles with a radius ranging from 20 to 200 m (in 10 m steps) around each branch bundle.
 Variable descriptions (1 table)

en: biodiversity colonisation conservation dead-wood forest-management habitat-availability habitat-heterogeneity saproxylic-beetles sloss

envidat

en: EnviDat: the Environmental Data Portal

en: Beetle communities reared from beech branches and associated forest and environmental variables

educ

en: Education, culture and sport

en: Abundances of saproxylic beetle species for each branch bundle

en: Community matrix (saproxylic beetles)

en: Abundances of all beetle species for each branch bundle

en: Community matrix (all beetles)

en: Data on the branch bundle, forest and environmental variables

en: Forest and environmental variables

en: Detailed description of the forest and environmental variables

en: Variable description

biodiversity

display_name: biodiversity

colonisation

display_name: colonisation

conservation

display_name: conservation

dead-wood

display_name: dead-wood

forest-management

display_name: forest-management

habitat-availability

display_name: habitat-availability

habitat-heterogeneity

display_name: habitat-heterogeneity

saproxylic-beetles

display_name: saproxylic-beetles

sloss

display_name: sloss


en:
The datasets comprise nearly 19’000 trees of European beech (_Fagus sylvatica_ L.) from unmanaged forests in Switzerland, Germany / Lower Saxony and Ukraine. Tree death was modelled as a function of size and growth, i.e., stem diameter (DBH) and relative basal area increment (relBAI). To explain the spatial and temporal variability in mortality patterns, we considered a large set of environmental and stand characteristics.

 Inventory data
The strict forest reserves in Switzerland and Germany had been established in the period of 1961-1975 and 1971-1974, respectively. Every reserve included up to 10 permanent plots ranging from 0.09 to 1.8 ha in size, with slightly irregular re-measurement intervals. Permanent plots with pure or mixed beech stands were selected from the reserves of both networks. Reserves with considerable wind disturbance during the monitored intervals were excluded from the analysis. In addition to data from the Swiss and German reserves, data from a 10 ha plot in the primeval beech forest Uholka in Western Ukraine including three remeasurements were used. The inventory data provide diameter measurements at breast height (dbh) for revisited trees with a diameter of more than 4, 7 and 6 cm for Switzerland, Germany and Ukraine, respectively.

 Mortality predictors
A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory. As an explanatory variable, the annual relative basal area increment (relBAI) was calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area. Tree dbh in the second inventory was used in addition to relBAI to model tree status (alive or dead) of the third inventory.

To increase the generality of the mortality models, we selected environmental variables that are known to have a considerable influence on growth and mortality of beech. We emphasized the effects of water availability using a large set of drought characteristics that were calculated based on the local site water balance. We also related beech mortality to soil pH, temperature, precipitation and growing degree-days. Additionally, we considered stand characteristics that reflect the development stage, competition and structure of the forests.

 Further information
For further information, refer to Hülsmann _et al_. (2016) Does one model fit all? patterns of beech mortality in natural forests of three European regions. _Ecological Applications_.

en: fagus-sylvatica forest-inventory forest-reserves mortality-models primeval-forests tree-mortality

en: Data from: Does one model fit all? patterns of beech mortality in natural forests of three European regions

en:
READ ME for

Hülsmann L, Bugmann H, Commarmot B, Meyer P, Zimmermann S, Brang P
Data from: Does one model fit all? Patterns of beech mortality in natural forests of three European regions.
Ecological Applications http://dx.doi.org/10.5061/dryad.h4s6t

Forest inventory data of beech for the development of individual-tree mortality models from strict forests reserves in Switzerland, Germany and Ukraine.

The data package provides the files
CH_reduced: inventory data of the reduced dataset from Switzerland that was used to assess the influence of additional environmental and stand characteristics on beech mortality
CH: inventory data from strict forest reserves in Switzerland
DE: inventory data from strict forest reserves in Germany
UA: inventory data from a primeval beech forest in Ukraine

A set of three consecutive inventories was used to generate records for the calibration of mortality models based on trees that were alive in the first and second inventory and either dead or alive in the third inventory.
Diameter at breast height: dbh (mm)
Annual relative basal area increment: relBAI (), calculated based on the first and the second dbh measurement as the compound annual growth rate of the trees basal area (Bigler and Bugmann 2004)
Status of the tree: y, 0 = alive, 1 = dead
Length of the mortality period: dt (years)

Additional environmental and stand characteristics were derived for the reduced Swiss dataset.
Note the varying seasonal level of the covariates considering the entire year, the growing season from April to September (G) and the winter month January to March (W).
All climatic covariates were calculated for both the ‘growth’ (2) and the ‘mortality’ period (3). The stand covariates were derived for the second inventory of each record (2).

Mean diameter at breast height: dbh.mean.2 (mm)
Interquartile range of diameter at breast height: dbh.IQR.2 (mm)
Median diameter at breast height: dbh.median.2 (mm)
Basal area per hectare: BA.2 (m2 ha-1)
Number of trees per hectare: N.2 (ha-1)
pH-value: pH ()
Available water capacity in the soil: AWC (mm)
Mean annual precipitation sum: P.2, P.3 (mm)
Mean precipitation sum during growing season: PG.2, PG.3 (mm)
Mean annual air temperature: mT.2, mT.3 (°C)
Mean air temperature during growing season: mTG.2, mTG.3 (°C)
Mean air temperature during winter months: mTW.2, mTW.3 (°C)
Mean growing degree-days: GDD.2, GDD.3 ()
Mean number of months during growing season with water deficit: mDEFdurG.2, mDEFdurG.3 ()
Mean annual maximum water deficit: mDEFmax.2, mDEFmax.3 (mm)
Overall maximum of the annual maximum water deficit: maxDEFmax.2, maxDEFmax.3 (mm)
Mean of cumulative water deficit during growing season: mDEFcumG.2, mDEFcumG.3 (mm)
Overall maximum of cumulative water deficitduring growing season: maxDEFcumG.2, maxDEFcumG.3 (mm)
Percentage of years with at least one month water deficit: percDEF.2, percDEF.3 (%)

en: Swiss data reduced

en: Swiss data full

en: German data

en: Ukrainian data

fagus-sylvatica

display_name: fagus-sylvatica

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves

mortality-models

display_name: mortality-models

primeval-forests

display_name: primeval-forests

tree-mortality

display_name: tree-mortality


en:
 Nuclear microsatellite markers and genotype data for _Trichopria ddrosophilae_

This data set comprises (i) the characteristics of a set of 21 species-specific nuclear microsatellites for PCR amplification in _Trichopria drosophilae_ (ii) and genotype data for samples collected in southern Switzerland (Canton of Ticino), with few reference samples from Canton of Vaud, southern Germany, and northern Italy (lab-reared population).
Markers were developed by Ecogenics GmbH, Balgach (Switzerland), using MiSeq Nano 2x250 v2 format (on a mix of 10 individuals). Multiplex PCR assays for multilocus genotyping were established by Ecological Genetics (WSL Birmensdorf), and population genetic analyses are found in Gugerli et al., Agrarforschung Schweiz 2019.

en: biological-control drosophila-suzukii multilocus-genotypes nuclear-microsatellite-markers population-genetics simple-sequence-repeats switzerland trichopria-drosophilae

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Nuclear microsatellite markers for Trichopria drosophilae, parasitoid wasp on Drosophila suzukii

educ

en: Education, culture and sport

en: Table comprising all pertinent information for multiplex PCRs of species-specific nuclear microsatellite makers for Trichopria drosophilae, comprising all 21 newly developed markers, details on full sequences with GenBank accession numbers, primer sequences (including labeling and pig-tails), and repeat motives. PCRs with respective annealing temperatures (AnnealingTemp) refer to Type-It Multiplex PCR Kit (Qiagen, Hilden, Germany).

en: Multilocus genotypes (biallelic coding for 21 nuclear microsatellites) of Trichopria drosophilae described in Gugerli et al. Agrarforschung Schweiz 2019. Missing data denoted as '999'. Population codes (PopNo) are the following: 1, Vezia; 3, Contone ; 5, Davesco; 6, Corteglia; 7, Mezzana; 8, Stabio; 9, Gordola; 10, Sementina; 12, Brusata di Novazzano; 14, Monteggio; 16, Giubiasco; 17, ComoBP; 18, VD; 19, Weil_D; 20, Dossenheim; 21, BioPlanet_Como. Coordinates (CoordCH_E, CoordCH_N) refer to the Swiss coordinates system CH1903.

biological-control

display_name: biological-control

drosophila-suzukii

display_name: drosophila-suzukii

multilocus-genotypes

display_name: multilocus-genotypes

nuclear-microsatellite-markers

display_name: nuclear-microsatellite-markers

population-genetics

display_name: population-genetics

simple-sequence-repeats

display_name: simple-sequence-repeats

switzerland

display_name: switzerland

trichopria-drosophilae

display_name: trichopria-drosophilae


en:
The study aims to determine the effective elastic properties of snow, firn, and bubbly ice based on microstructural quantities. Anisotropy, one of these quantities (the other being ice volume fraction) in snow and ice, has two types: geometrical and crystallographic, resulting in snow's macroscopic anisotropic elastic behavior. The research focuses on the impact of geometrical anisotropy on potential ice volume fractions in snow and ice. 391 micro-CT images from various locations, including laboratories, the Alps, the Arctic, and Antarctica, were analyzed to achieve this.
 The analysis involved microstructure-based finite element simulations, which inherently consider microstructure and calculate the elasticity tensor. Hashin-Shtrikman bounds were utilized to predict the elastic properties of the microstructure samples. These bounds effectively captured the nonlinear interplay between geometrical anisotropy, captured by the Eshelby tensor and density. HS bounds have the advantage of the correct limiting behavior for low to high-ice volume fractions.
 We derived parameterization for five transversely isotropic elasticity tensor components, requiring only two free parameters. This parameterization was valid for ice volume fractions ranging from 0.06 to 0.93. The analysis employing the Thomsen parameter highlighted the dominance of geometrical anisotropy until an ice volume fraction of 0.7. However, to fully comprehend the elasticity of bubbly ice, a comprehensive approach is necessary to integrate coupled elastic theories that account for both geometrical and crystallographic anisotropy.
This dataset includes a Jupyter notebook with all the necessary functions required to predict the elasticity tensor of snow for the given ice volume fraction and anisotropy. Also, the code contains the least squares optimization function to compute the elasticity tensor for the six components of stress and strain. For example, we consider our dataset to calculate the samples' elasticity tensor and reproduce Fig. 7 from the paper. We take the stress and strain values obtained from load states as input for this example.
Also, a .csv file contains all the microstructural information: ice volume fraction, anisotropy, correlation functions, voxels size, and no. of voxels of the samples and the elasticity tensor obtained from finite element simulations and from present work parameterization.

en: anisotropy crystallographic elasticity fem geometrical microstructure x-ray-tomography

en: Effective, anisotropic elasticity tensor of snow, firn, and bubbly ice

anisotropy

display_name: anisotropy

crystallographic

display_name: crystallographic

elasticity

display_name: elasticity

fem

display_name: fem

geometrical

display_name: geometrical

microstructure

display_name: microstructure

x-ray-tomography

display_name: x-ray-tomography


en:
(English version below)
Ziel dieser Faktenblätter ist es Informationen zu den Schätzmethoden, Hinweise zur Parametrisierung und eine grobe Einschätzung der Güte der Resultate in übersichtlicher Form bereitzustellen. Ein zeitaufwändiges Zusammensuchen dieser Informationen aus unterschiedlichen Quellen entfällt daher weitgehend. Die Bearbeitenden sollen damit in der Lage sein, sich innerhalb weniger Minuten die wichtigsten Hintergrundinformationen zu jeder der vorgestellten Methoden in Erinnerung zu rufen. Der Leitfaden unterstützt bei der Plausibilisierung und bei der Mittelung der Ergebnisse der einzelnen Schätzmethoden zu einem repräsentativen Endergebnis. Vorausgesetzt wird Grundwissen und Erfahrung in der Thematik.
Der Leitfaden führt die Fachperson anhand eines Entscheidungsbaums in acht Schritten durch den Arbeitsablauf und unterstützt mit einem Fragenkatalog bei der Plausibilisierung der Ergebnisse.
Auf den Faktenblättern sind für jede Schätzmethode alle relevanten Informationen stichwortartig und grafisch übersichtlich auf einer DIN-A4 Seite zusammengefasst. Jedes Faktenblatt ist einheitlich gegliedert.
The aim of these fact sheets is to provide information on the flood estimation methods, notes on their parameterization and a rough assessment of the quality of the results in a clear form. A time-consuming research for this information from different sources is therefore largely eliminated. The users should be able to recall the most important background information on each of the methods presented within a few minutes. The guide provides support in checking plausibility and averaging the results of the individual estimation methods to produce a representative final result. Basic knowledge and experience in the subject are assumed.
The guide leads the expert through the workflow in eight steps using a decision tree and supports the plausibility check of the results with a list of questions.
On the fact sheets, all relevant information for each estimation method is summarized with key words and graphics on one DIN A4 page. Each fact sheet has a standardized structure.

en: decision-making engineering estimation-methods flood hydrology

en: Faktenblätter und Leitfaden für Hochwasserschätzmethoden in der Praxis

format: PDF

media_type: application/pdf

decision-making

display_name: decision-making

engineering

display_name: engineering

estimation-methods

display_name: estimation-methods

flood

display_name: flood

hydrology

display_name: hydrology


en:
This dataset documents the analyses and the plot generation for the manuscript **Long-term biomass dynamics in temperate forests in Europe after cessation of management**.
We analyse biomass development in an extensive network of 224 plots in 37 natural forest reserves (NFR) covering a wide environmental gradient with mean annual temperatures ranging from 1 to 10.4 °C and mean annual precipitation ranging from 901 to 2317 mm. Forest inventories have been conducted approximately every 10 years during the last 60 years.
It consists of the following files:
+ **Long_term_biomass_script.Rmd**: R markdown document to reproduce the analysis and the plot generation.
+ **dat_biomass.RDS**: Biomass values for each permanent plot at each inventory. This dataset is used for data exploration and for the Biomass model, and to create Figure 2 and Figure 3.
+ **dat_biomass_change.RDS**: Biomass change values between inventories for each permanent plot. It includes the explanatory variables as well. This dataset is used for the Biomass change model and to create Figure 4 and Figure 5.
+ **NFI_climspace_netCDF.RDS**: Climatic space covered by the Swiss National Forest Inventory (NFI) that is used in Figure 5.

en: biomass-dynamics carbon-storage environmental-gradients forest-inventory forest-reserves

en: Long-term biomass dynamics of temperate forests in Europe after cessation of management

en: R markdown document used to download the data files, reproduce the analysis and plot generation.

format: OCTET

en: Climatic space covered by the Swiss National Forest Inventory (NFI) that will be used in Figure 5.

biomass-dynamics

display_name: biomass-dynamics

carbon-storage

display_name: carbon-storage

environmental-gradients

display_name: environmental-gradients

forest-inventory

display_name: forest-inventory

forest-reserves

display_name: forest-reserves


en: This dataset contains the Fire Weather Index for Hydrological Bavaria from 1980 - 2099 as stated in the paper "Climate change impacts on regional fire weather in heterogeneous landscapes of Central Europe" published in Natural Hazards and Earth System Sciens (NHESS) 2023. The dataset contains daily Fire Weather Index values for all 50 members (subfolders of the dataset) of the CRCM5-LE (11 km spatial resolution) from 1980 to 2099 over the domain of Hydrological Bavaria. Please cite this dataset as the publication: Miller, J., Böhnisch, A., Ludwig, R., & Brunner, M. I. (2023). Climate change impacts on regional fire weather in heterogeneous landscapes of Central Europe. Natural Hazards and Earth System Sciences Discussions, 1-25. doi: 10.5194/nhess-2023-51.

en: climate climate-change climate-indicators europe european-alps fire forest-fire indicator-values meteorological-data mountains

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Fire Weather Index for Hydrological Bavaria from 1980-2099 derived from the 50 member CRCM5-LE

en: Data access

climate

display_name: climate

climate-change

display_name: climate-change

climate-indicators

display_name: climate-indicators

europe

display_name: europe

european-alps

display_name: european-alps

fire

display_name: fire

forest-fire

display_name: forest-fire

indicator-values

display_name: indicator-values

meteorological-data

display_name: meteorological-data

mountains

display_name: mountains


en:
This dataset contains the output and reference data published in the paper "Automated snow avalanche release area delineation - validation of existing algorithms and proposition of a new object-based approach for large scale hazard indication mapping" Yves Bühler, Daniel von Rickenbach, Andreas Stoffel, Stefan Margreth, Lukas Stoffel, Marc Christen (2018) Natural Hazards And Earth System Sciences.

Abstract:
Snow avalanche hazard is threatening people and infrastructure in all alpine regions with seasonal or permanent snow cover around the globe. Coping with this hazard is a big challenge and during the past centuries, different strategies were developed. Today, in Switzerland, experienced avalanche engineers produce hazard maps with a very high reliability based on avalanche cadastre information, terrain analysis, climatological datasets and numerical modelling of the flow dynamics for selected avalanche tracks that might affect settlements. However, for regions outside the considered settlement areas such area-wide hazard maps are not available mainly because of the too high cost, in Switzerland and in most mountain regions around the world. Therefore, hazard indication maps, even though they are less reliable and less detailed, are often the only spatial planning tool available. To produce meaningful and cost-effective avalanche hazard indication maps over large regions (regional to national scale), automated release area delineation has to be combined with volume estimations and state-of-the-art numerical avalanche simulations.

In this paper we validate existing potential release area (PRA) delineation algorithms, published in peer-reviewed journals, that are based on digital terrain models and their derivatives such as slope angle, aspect, roughness and curvature. For validation, we apply avalanche cadastre data from three different ski resorts in the vicinity of Davos, Switzerland, where experienced ski-patrol staff mapped most avalanches in detail since many years. After calculating the best fit input parameters for every tested algorithm, we compare their performance based on the reference datasets. Because all tested algorithms do not provide meaningful delineation between individual potential release areas (PRA), we propose a new algorithm based on object-based image analysis (OBIA). In combination with an automatic procedure to estimate the average release depth (d0), defining the avalanche release volume, this algorithm enables the numerical simulation of thousands of avalanches over large regions applying the well-established avalanche dynamics model RAMMS. We demonstrate this for the region of Davos for two hazard scenarios, frequent (10 – 30 years return period) and extreme (100 – 300 years return period). This approach opens the door for large scale avalanche hazard indication mapping in all regions where high quality and resolution digital terrain models and snow data are available.

en: avalanche hazard-indication-mapping hazard-mapping ramms release snow

envidat

en: EnviDat: the Environmental Data Portal

en: Automated Avalanche Release Area (PRA) Delineation Davos

educ

en: Education, culture and sport

en: This folder contains the output of the different investigated algorithms plus the reference dataset, used for training and validation.

en: Potential Release  Area  NHESS

en: Simulated maximum pressures for the scenarios frequent and extreme taking the forest layer into account

en: RAMMS simulations NHESS

avalanche

display_name: avalanche

hazard-indication-mapping

display_name: hazard-indication-mapping

hazard-mapping

display_name: hazard-mapping

ramms

display_name: ramms

release

display_name: release

snow

display_name: snow


en:
A rule-based algorithm [(Schwieder et al., 2022)](https://doi.org/10.1016/j.rse.2021.112795) was used to produce annual maps for 2018–2021 of grassland-management events, i.e. mowing and/or grazing, for Switzerland using Sentinel-2 and Landsat 8 satellite time series. All satellite images were processed with the [FORCE](https://force-eo.readthedocs.io) framework.

The resulting maps provide information on the number and timing of grassland-management events at a spatial resolution of 10 m × 10 m for the whole of Switzerland. For the final maps, permanent grasslands were masked using a variety of land-use layers, according to [Huber et al. (2022)](https://doi.org/10.1002/rse2.298) but replacing the crop mask with the agricultural-use data from the cantons.

We assessed the detection of management events based on independent reference data, which we acquired from daily time series of publicly available webcams that are widely distributed across Switzerland. We further tested the ecological relevance of the generated intensity measures in relation to nationwide biodiversity data (see [Weber et al., 2023](https://doi.org/10.1002/rse2.372)).

The webcam-based reference data used for verification was subsequently added on 14.02.2024.

en: grassland land-use landsat management mowing remote-sensing sentinel-2 use-intensity

en: Grassland-use intensity maps for Switzerland

en: Spatial distribution of the number of management events for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the distribution of management frequency (Weber et al., 2023; IN REVIEW)

en: Preview number of grassland management events 2020

format: PNG

media_type: image/png

en: Spatial distribution of the timing (day of year; DOY) of the first management event for Switzerland and for three zoomed-in regions (a, b, c). The three zoomed-in regions show different grassland-use intensities, which are reflected in the timing of the first event of the year (Weber et al., 2023; IN REVIEW)

en: Preview time of 1st grassland management event 2020

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2018. See readme file for more details.

en: Grassland-use intensity map 2018

format: GeoTIFF

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2019. See readme file for more details.

en: Grassland-use intensity map 2019

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2020. See readme file for more details.

en: Grassland-use intensity map 2020

en: Raster stack with information on the number and timing of grassland-management events (i.e. mowing, grazing) at a spatial resolution of 10 m × 10 m for the whole of Switzerland for 2021. See readme file for more details.

en: Grassland-use intensity map 2021

en: Metadata and description of the maps and webcam-based reference data.

en: Readme

en: Webcam-based reference data from 2020 and 2021 (see readme).

en: Webcam-based reference data

grassland

display_name: grassland

land-use

display_name: land-use

landsat

display_name: landsat

management

display_name: management

mowing

display_name: mowing

remote-sensing

display_name: remote-sensing

use-intensity

display_name: use-intensity


soil-property-maps-for-the-swiss-forest

en:
We used 2071 forest soil profiles to model a wide range of soil properties for the forested area of Switzerland. The spatial prediction is based on the principle of «digital soil mapping». This involves linking soil profiles with soil forming factors using statistical or machine learning methods.

A quantile regression forest (QRF) approach was applied to predict the following soil properties at six depth ranges: clay, gravel, sand, fine earth density, SOC. The depth ranges correspond to the standard depths of the [GlobalSoilMap.Net](https://www.isric.org/) specification: 0–5, 5–15, 15–30, 30–60, 60–100 and 100–200 cm. In addition, the total soil depth down to a non-root-permeable layer or solid rock soil thick was predicted. To quantify the uncertainty for each predicted pixel, the upper and lower limit of the 90% prediction interval derived from QRF was calculated. More details on the methods and results are described in Baltensweiler et al. 2021 and Baltensweiler et al 2022.

The soil property maps, and the uncertainty maps are provided as a GeoTIFF files at 25 m resolution. The excel file (xlsx) provides a short description of the raster layers.

**The soil and the uncertainty maps can be viewed in a simple web-GIS application available at:**
[www.wsl.ch/soilmaps](https://www.wsl.ch/soilmaps).

en: dsm forest soc soil soil-depth soil-ph soil-properties soil-texture switzerland

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Soil property maps for the Swiss forest

title_for_slug: soil-property-maps-for-the-swiss-forest

educ

en: Education, culture and sport

dsm

display_name: dsm

forest

display_name: forest

soc

display_name: soc

soil

display_name: soil

soil-depth

display_name: soil-depth

soil-ph

display_name: soil-ph

soil-properties

display_name: soil-properties

soil-texture

display_name: soil-texture

switzerland

display_name: switzerland


en:
Short videos showing scenarios of potential landscape development in a 4°C warmer climate for a Swiss mountain region and a region on the Swiss Plateau. The videos are in German or French with subtitles.
The videos' key message is: Climate change will have an impact on the Swiss landscapes. However, according to the strategy chosen to adapt to climate change, society and politics will also have a strong influence on the future landscapes and the services they will provide. If no action is taken to adapt to climate change today, then society will have to react in a hurry at a later point in time. This can often result in resource-intensive technical solutions. Conversely, if society takes action in an anticipatory way already today, nature-based solutions can be implemented more successfully and humans can benefit more from the landscape services..
These short videos are teasers that should make the viewers curious to visit the panorama pictures (https://viergrad.envidat.ch/).

en: climate-change landscape-change policy-action scenario visualization

en: Teaser videos Swiss landscapes under climate change

en:
Scenarios of landscape change under climate change in the Swiss mountains.
Trailer in German with written subtitles.

en: Entremont subtitles DE

en: Scenarios of landscape change under climate change in the Swiss mountains. Trailer in French with subtitles.

en: Entremon subtitles FR

en:
Scenarios of landscape change under climate change in the Swiss lowlands.
Trailer in German with subtitles.

en: Seeland subtitles DE

en:
Scenarios of landscape change under climate change in the Swiss lowlands.
Trailer in French with subtitles.

en: Seeland subtitles FR

climate-change

display_name: climate-change

landscape-change

display_name: landscape-change

policy-action

display_name: policy-action

scenario

display_name: scenario

visualization

display_name: visualization


en: This dataset comprised 254 historical (1937 – 1948) and resurveyed (2019 – 2022) vegetation relevés of beech-dominated forests sites in the Swiss Jura mountains. The data contains species lists as well as site information.

en: air-pollution climate-change fagus-sylvatica forest forest-management ground-vegetation

en: Resurveyed vegetation releves of beech forests in the Swiss Jura Mountains

en: This table contains information about the 254 forest sites used in the publication of Scherrer et al. 2024.

en: Site Information

en: This table contains information about the individual taxa found in the historic and current vegetation relevés in Scherrer et al. 2024.

en: Taxa Data

air-pollution

display_name: air-pollution

fagus-sylvatica

display_name: fagus-sylvatica

forest-management

display_name: forest-management

ground-vegetation

display_name: ground-vegetation


en:
This study examines the siting scenarios for renewable energy infrastructure (REI) in Switzerland, incorporating the external costs of ecosystem services and, innovatively, social preferences. This approach challenges the prevalent techno-economic siting paradigm, which often overlooks these externalities. To minimize the external costs of the scenarios while maximizing energy yield, Marxan, an optimization software, was employed.
MARXAN was run for 2 versions: a) without ground-mounted open space PV infrastructure (excl. OS) and b) with ground-mounted open space PV infrastructure (incl. OS). In each version optimization was done using ecological costs (ECUess) or social costs (ECUsoc) in a regular grid of 4x4km (planning unit).

File:
PU_data.shp: compressed Shapefile (ESRI) from the MARXAN optimization with 2216 rows (objects) and 18 columns (variables) with sf (simple feature) and data frame classes.

Headers are described below:
X01 = Planning_units (PUs)

X02 = incl.OS. number of times pu was selected in MARXAN when optimized for ecological costs
X03 = incl.OS. number of times pu was selected in MARXAN when optimized for social costs
X04 = incl.OS. ecological costs (ECUess) of pu when realizing the total energy (normalized)
X05 = incl.OS. social costs (ECUsoc) of pu when realizing the total energy (normalized)
X06 = incl.OS. total energy (MWh/a)
X07 = incl.OS. energy from roof-mounted PV infrastructure (MWh/a)
X08 = incl.OS. energy from wind turbines (MWh/a)
X09 = incl.OS. energy from ground-mounted PV infrastructure (MWh/a)

X10 = excl.OS. number of times pu was selected in MARXAN when optimized for ecological costs
X11 = excl.OS. number of times pu was selected in MARXAN when optimized for social costs
X12 = excl.OS. ecological costs (ECUess) of pu when realizing the total energy (normalized)
X13 = excl.OS. social costs (ECUsoc) of pu when realizing the total energy (normalized)
X14 = excl.OS. total energy (MWh/a)
X15 = excl.OS. energy from roof-mounted PV infrastructure (MWh/a)
X16 = excl.OS. energy from wind turbines (MWh/a)
X17 = excl.OS. energy from ground-mounted PV infrastructure (MWh/a)

geometry = Simple feature XY geometry (SFC_POINT) each representing the center of a 4x4km planning unit (PU) in EPSG 21781 (CRS CH1903 / LV03).

For MARXAN optimizations (for meaning of standard files in MARXAN see https://scholar.google.ch/scholar_url?url=https://courses.washington.edu/cfr590/software/Marxan1810/marxan_manual_1_8_2.pdf&hl=de&sa=X&ei=NAWHZI6JJ8PFmAGMo47oDQ&scisig=AGlGAw-DBrsV4kUzkR6GkN1jtG66&oi=scholarr), pu_data.shp was used to generate MARXAN files input.dat, pu.dat, puvfeat.dat, spec.dat.
Coordinate Reference System: CH1903 / LV03. EPSG: 21781.

en: ecosystem-services energy landscape marxan optimization photovoltaic social-acceptance spatial-planning wind-power

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Optimizing renewable energy siting in the Swiss landscape

educ

en: Education, culture and sport

en:
This is the compressed Shapefile (ESRI) from the MARXAN optimization with 2216 rows (objects) and 18 columns (variables) with sf (simple feature) and data frame classes.
Column description:
X01 = Planning_units (PUs)
X02 = incl.OS. number of times pu was selected in MARXAN when optimized for ecological costs
X03 = incl.OS. number of times pu was selected in MARXAN when optimized for social costs
X04 = incl.OS. ecological costs (ECUess) of pu when realizing the total energy (normalized)
X05 = incl.OS. social costs (ECUsoc) of pu when realizing the total energy (normalized)
X06 = incl.OS. total energy (MWh/a)
X07 = incl.OS. energy from roof-mounted PV infrastructure (MWh/a)
X08 = incl.OS. energy from wind turbines (MWh/a)
X09 = incl.OS. energy from ground-mounted PV infrastructure (MWh/a)

X10 = excl.OS. number of times pu was selected in MARXAN when optimized for ecological costs
X11 = excl.OS. number of times pu was selected in MARXAN when optimized for social costs
X12 = excl.OS. ecological costs (ECUess) of pu when realizing the total energy (normalized)
X13 = excl.OS. social costs (ECUsoc) of pu when realizing the total energy (normalized)
X14 = excl.OS. total energy (MWh/a)
X15 = excl.OS. energy from roof-mounted PV infrastructure (MWh/a)
X16 = excl.OS. energy from wind turbines (MWh/a)
X17 = excl.OS. energy from ground-mounted PV infrastructure (MWh/a)
geometry = Simple feature XY geometry (SFC_POINT) each representing the center of a 4x4km planning unit (PU) in EPSG 21781 (CRS CH1903 / LV03).

ecosystem-services

display_name: ecosystem-services

energy

display_name: energy

landscape

display_name: landscape

marxan

display_name: marxan

optimization

display_name: optimization

photovoltaic

display_name: photovoltaic

social-acceptance

display_name: social-acceptance

spatial-planning

display_name: spatial-planning

wind-power

display_name: wind-power


en:
Data from a 17-year-long irrigation experiment (Pfynwald, Switzerland) in a naturally dry forest dominated by 100-year-old pine trees (Pinus sylvestris). This dataset includes measure tree-ring width and tree-ring isotope chronologies (stable isotope ratios of non-exchangeable hydrogen δ2H, oxygen δ18O, and carbon δ13C), for the Pfynwald experiment, including control trees, irrigation and irrigation-stop treatments until the year 2019.

This dataset contains all data on which the following publication below is based.
Please cite this paper together with the citation for the datafile.

en: dendrochronology isotopes pfynwald pinus-sylvestris scots-pine tree-rings tree-ring-cellulose

en: Pfynwald 2019 - Dendrochronological and tree-ring isotope dataset

en: Isotope measurements of tree-level tissues for the vegetative season 2019.

en: Read me file.docx

dendrochronology

display_name: dendrochronology

isotopes

display_name: isotopes

pfynwald

display_name: pfynwald

pinus-sylvestris

display_name: pinus-sylvestris

scots-pine

display_name: scots-pine

tree-ring-cellulose

display_name: tree-ring-cellulose

tree-rings

display_name: tree-rings


en:
What are the research data files about:
Raw data on various beech (Fagus sylvatica) leaf traits. Beech leaf chemistry (primary and specialized metabolites), leaf damage measurements from various herbivore feeding guilds and crown health assessment

Which methods were used:
Field surveys on trees that showed either prematured defoliation due to drought-stress or showed not pre-mature defoliation. .

When and where was the data collected/analyzed:
Field data was collected in 2019, 2020
Data was analyzed in 2021-2023

en: climate-change drought-legacy fagus-sylvatica herbivory phytochemistry

en: Legacy effects of premature defoliation in response to an extreme drought event modulate phytochemical profiles with subtle consequences for leaf herbivory in European beech

climate-change

display_name: climate-change

drought-legacy

display_name: drought-legacy

fagus-sylvatica

display_name: fagus-sylvatica

herbivory

display_name: herbivory

phytochemistry

display_name: phytochemistry


en:
snowBedFoam 1.0. is a snow transport solver implemented in the computational fluid dynamics software OpenFOAM. It is adapted from the standard multi-phase flow solver DPMFoam for application in snow-influenced environments.
To simulate aeolian snow transport, snowBedFoam 1.0. handles coupled Eulerian–Lagrangian phases, which involve a finite number of particles (snow) spread in a continuous phase (air). The snow erosion and deposition are modelled through physics-based equations similar to the ones employed in the well-established LES-Lagrangian Stochastic Model (Comola and Lehning, 2017 ; Sharma et al., 2018 ; Melo et al., 2022). This modelling approach is computationally intensive and thus adapted to simulate snow movement and distribution on small scale terrain.
First, snowBedFoam 1.0. was applied to topographical data collected on Arctic sea ice during the MOSAiC expedition (Clemens-Sewall, 2021). Together with atmospheric data from the MOSAiC Met City (Shupe et al., 2021) used for the fluid forcing, the model was able to accurately simulate the zones of erosion and deposition of snow along a complex ice ridge structure (Hames et al., 2022).
Second, snowBedFoam 1.0. was used to simulate the snow distribution around the German Antarctic research station Neumayer Station III. The effect of snow properties, fluid forcing and aerodynamic structures on the snow accumulation were assessed.
snowBedFoam 1.0 was implemented in 2 different OpenFOAM versions, namely OpenFOAM-2.3.0 and OpenFOAM-5.0. The latter offers more options for turbulence models and boundary conditions. The fundamental model equations were not changed from one implementation to the other, thus both still correspond to snowBedFoam 1.0. The two branches are called snowBedFoam-v1-2.3.0 (OpenFOAM-2.3.0) and snowBedFoam-v1-5.0 (OpenFOAM-5.0). The core codes of snowBedFoam 1.0. are directly accessible on the WSL/SLF GitLab repository (more details in the Resources section).

en: antarctica arctic-sea-ice mosaic openfoam snow-deposition snow-transport

en: snowBedFoam: an OpenFOAM Eulerian-Lagrangian solver for modelling snow transport

en: This is the initial draft of the paper where the snowBedFoam 1.0. results are tested against Terrestrial Laser Scan (TLS) measurements of snow dynamics on Arctic sea ice (MOSAiC expedition). It highlights the numerical limitations of our model as well as the measurement uncertainties, which may occur in such extreme environments.

en: Paper Draft

en:
OpenFOAM-2.3.0. scripts containing the implemented Eulerian-Lagrangian snow transport model.

The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en:
Extract from the preliminary MOSAiC atmospheric data (Level 2) for the time period 6th to 13th of November, 2019.
This data was used to set up the fluid forcing parameters in the snowBedFoam simulations on MOSAiC sea ice. It is being published in this repository with the kind permission from Matthew Shupe and his team.
The final processed and quality controlled version of this dataset (Level 3) has not been published yet. A complete reference will be added in this description once it is released.

en: MOSAiC Met City preliminary (Level 2) wind data

en:
OpenFOAM-5.0 scripts containing the implemented Eulerian-Lagrangian snow transport model.
The code file provided here is not updated. The most recent version of the script can be found on the WSL/SLF GitLab repository: https://gitlabext.wsl.ch/atmospheric-models/snowbedfoam-v1-0.git

en: Files containing the topographical data barometrically measured in June 2009 around the German Antarctic Research station Neumayer III. Those measurements are compared to the snowBedFoam simulations to assess the ability of the model to reproduce real snow distribution observations.

en: Snowdrift measurements around Neumayer Station III

en:
Snow distribution results around Neumayer Station III obtained for the sensitivity analysis and comparison to measurements. The file contains several sub-folders, namely:
-COMP: simulation output for the comparison to measurements;
-FLOW: simulation output for the study of wind forcing impact;
-simulation_exampleCase: example case of a snowBedFoam simulation with the reference Neumayer Station mesh;
-SNOW: simulation output for the study of snow properties impact;
-STRUCT: simulation output for the study of structure properties impact.

en: Neumayer III simulations

antarctica

display_name: antarctica

arctic-sea-ice

display_name: arctic-sea-ice

mosaic

display_name: mosaic

openfoam

display_name: openfoam

snow-deposition

display_name: snow-deposition

snow-transport

display_name: snow-transport


en:
This dataset contains all data on which the following publication below is based.

Paper Citation:
Frey B., Maurer C., Schneider K. (2023) Informationen zum Boden anhand der Gebundenheit der Rote-Liste Arten BAFU. Bundesamt für Umwelt BAFU. 26 p.

Please cite this paper together with the citation for the datafile.

Soil is the habitat and basis of life for countless creatures. The great importance of soil organisms for the fertility of our soils is widely recognized, but information is sparse on their distribution and possible endangerment in Switzerland. In the present project, target species, i.e. species that are closely linked to the soil, were identified, and for the the first time, information was gathered on the degree of endangerment of the soil ecosystem in Switzerland on the basis of Red List species. For eleven Red List groups, the species' soil dependency was determined, i.e. whether their life cycle includes stages in or on the soil. The assessment of soil dependency was made using four classes, which enabled the classification not only of insects but also of vertebrates, land snails, lichens and fungi.

en: conservation database eco-fauna ecosystem-protection fauna fungi info-fauna lichens red-list soil-biodiversity soil-dependency soil-organisms soil-quality

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: EnviDat: the Environmental Data Portal

en: Information on soil based on the soil dependency of the FOEN red list species

educ

en: Education, culture and sport

en: Proportion of endangered species grouped by the four soil dependency classes.

en: Raw dataset of species and their soil dependency as well as endangerment status.

en: Overview over the soil dependency and endangerment status of different groups of organisms.

conservation

display_name: conservation

database

display_name: database

eco-fauna

display_name: eco-fauna

ecosystem-protection

display_name: ecosystem-protection

fauna

display_name: fauna

fungi

display_name: fungi

info-fauna

display_name: info-fauna

lichens

display_name: lichens

red-list

display_name: red-list

soil-biodiversity

display_name: soil-biodiversity

soil-dependency

display_name: soil-dependency

soil-organisms

display_name: soil-organisms

soil-quality

display_name: soil-quality


en: We present forecasts of land-use/land-cover (LULC) change for Switzerland for three time-steps in the 21st century under the representative concentration pathways 4.5 and 8.5, and at 100-m spatial and 14-class thematic resolution. We modelled the spatial suitability for each LULC class with a neural network (NN) using >200 predictors and accounting for climate and policy changes. We used data augmentation to increase performance for underrepresented classes, resulting in an overall quantity disagreement of 0.053 and allocation disagreement of 0.15, which indicate good model performance. These class-specific spatial suitability maps outputted by the NN were then merged in a single LULC map per time-step using the CLUE-S algorithm, accounting for LULC demand for the future and a set of LULC transition rules. As the first LULC forecast for Switzerland at a thematic resolution comparable to available LULC maps for the past, this product lends itself to applications in land-use planning, resource management, ecological and hydraulic modelling, habitat restoration and conservation.

en: land-cover land-use landscape landscape-change machine-learning modelling

en: High resolution land use forecasts for Switzerland in the 21st century

en:
Code used to produce the Land-use/land-cover forecasts for Switzerland across the 21st century at 100-m resolution.
The script is based on input data which are not included as they are not freely available, therefore it will not run as it is. These input data are described in the accompanying publication on Data Science access to them can be requested to their owners. Alternatively the code can be modified to run on other data.

en: Compressed (.zip) file containing six georeferenced raster files in the GeoTIFF format with embedded coordinate reference system, and a table (comma separated values, .csv) encoding a colour palette for plotting (HEX colour codes for each class). GeoTIFF file names include the time-step and the RCP (e.g. “LULC_2020_2049_RCP45.tiff”). Each raster file has 3484x2207 square pixels (i.e. 7.7 megapixels) and is projected in the Swiss coordinate system CH1903+/LV95 (EPSG:2056).

land-cover

display_name: land-cover

land-use

display_name: land-use

landscape

display_name: landscape

landscape-change

display_name: landscape-change

machine-learning

display_name: machine-learning

modelling

display_name: modelling


en: To map and assess snow depth on different dates, 9 flights were conducted in the winter season of 2020/21 at the Latschüelfurgga in Davos. The data was captured with a Sony RX1R II mounted on a Wingtra drone and was processed with the Agisoft Metashape software. High-resolution DSMs, orthomosaics and snow height rasters, as well as the original RGB images from each flight are available.

en: drone-data dsm orthophoto photogrammetry snow-depth-mapping uav wingtra

en: Photogrammetric Drone Data Latschuelfurgga

en:
- DSM (10 cm resolution)
- Ortho (3 cm resolution)
- HS (10 cm resolution)
- original RGB drone images
- Agisoft Metashape Processing Report

All products are also available as a cloud optimized geotiff.

en: Data Access

drone-data

display_name: drone-data

dsm

display_name: dsm

orthophoto

display_name: orthophoto

photogrammetry

display_name: photogrammetry

snow-depth-mapping

display_name: snow-depth-mapping

uav

display_name: uav

wingtra

display_name: wingtra


photogrammetric-drone-data-gruenbodeli

en:
We conducted various drone flights at Grüenbödeli near Davos with the Sony RX1R II mounted on a Wingtra drone during 2020/21/22. The data was processed with the Agisoft Metashape Professional Software.
The following products are available for download:
- DSM 10cm resolution
- Orthomosaic 3cm/25mm resolution
- Snow Raster 10cm resolution
- original RGB images

envidat

en: EnviDat is the WSL data portal providing unified and managed access to environmental monitoring and research data. The portal has the capability to host and publish data sets. Through the sharing of unique and high-value data sets worldwide, EnviDat fosters research and contributes to advancing environmental science.

en: Photogrammetric Drone Data Grüenbödeli

title_for_slug: photogrammetric-drone-data-gruenbodeli

en:
- ortho (3 cm/25 mm resolution)
- DSM (10 cm resolution)
- HS (10 cm resolution)
- RGB images
- Agisoft Metashape Project Report

All products are also available as a cloud optimized geotiff.